Giovanni Cabiddu [Thu, 12 Aug 2021 20:21:23 +0000 (21:21 +0100)]
crypto: qat - move IO virtualization functions
Move IOV functions at the end of hw_data so that PFVF functions related
functions are group together.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Marco Chiappero [Thu, 12 Aug 2021 20:21:22 +0000 (21:21 +0100)]
crypto: qat - fix naming for init/shutdown VF to PF notifications
At start and shutdown, VFs notify the PF about their state. These
notifications are carried out through a message exchange using the PFVF
protocol.
Function names lead to believe they do perform init or shutdown logic.
This is to fix the naming to better reflect their purpose.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kanchana Velusamy [Thu, 12 Aug 2021 20:21:21 +0000 (21:21 +0100)]
crypto: qat - protect interrupt mask CSRs with a spinlock
In the PF interrupt handler, the interrupt is disabled for a set of VFs
by writing to the interrupt source mask register, ERRMSK.
The interrupt is re-enabled in the bottom half handler by writing to the
same CSR. This is done through the functions enable_vf2pf_interrupts()
and disable_vf2pf_interrupts() which perform a read-modify-write
operation on the ERRMSK registers to mask and unmask the source of
interrupt.
There can be a race condition where the top half handler for one VF
interrupt runs just as the bottom half for another VF is about to
re-enable the interrupt. Depending on whether the top or bottom half
updates the CSR first, this would result either in a spurious interrupt
or in the interrupt not being re-enabled.
This patch protects the access of ERRMSK with a spinlock.
The functions adf_enable_vf2pf_interrupts() and
adf_disable_vf2pf_interrupts() have been changed to acquire a spin lock
before accessing and modifying the ERRMSK registers. These functions use
spin_lock_irqsave() to disable IRQs and avoid potential deadlocks.
In addition, the function adf_disable_vf2pf_interrupts_irq() has been
added. This uses spin_lock() and it is meant to be used in the top half
only.
Signed-off-by: Kanchana Velusamy <kanchanax.velusamy@intel.com>
Co-developed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Marco Chiappero [Thu, 12 Aug 2021 20:21:20 +0000 (21:21 +0100)]
crypto: qat - move pf2vf interrupt [en|dis]able to adf_vf_isr.c
Interrupt code to enable interrupts from PF does not belong to the
protocol code, so move it to the interrupt handling specific file for
better code organization.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Marco Chiappero [Thu, 12 Aug 2021 20:21:19 +0000 (21:21 +0100)]
crypto: qat - fix reuse of completion variable
Use reinit_completion() to set to a clean state a completion variable,
used to coordinate the VF to PF request-response flow, before every
new VF request.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Svyatoslav Pankratov [Thu, 12 Aug 2021 20:21:18 +0000 (21:21 +0100)]
crypto: qat - remove intermediate tasklet for vf2pf
The PF driver uses the tasklet vf2pf_bh_tasklet to schedule a workqueue
to handle the vf2vf protocol (pf2vf_resp_wq).
Since the tasklet is only used to schedule the workqueue, this patch
removes it and schedules the pf2vf_resp_wq workqueue directly for the
top half.
Signed-off-by: Svyatoslav Pankratov <svyatoslav.pankratov@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Marco Chiappero [Thu, 12 Aug 2021 20:21:17 +0000 (21:21 +0100)]
crypto: qat - rename compatibility version definition
Rename ADF_PFVF_COMPATIBILITY_VERSION in ADF_PFVF_COMPAT_THIS_VERSION
since it is used to indicate the current version of the PFVF protocol.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Marco Chiappero [Thu, 12 Aug 2021 20:21:16 +0000 (21:21 +0100)]
crypto: qat - prevent spurious MSI interrupt in PF
There is a chance that the PFVF handler, adf_vf2pf_req_hndl(), runs
twice for the same request when multiple interrupts come simultaneously
from different VFs.
Since the source VF is identified by a positional bit set in the ERRSOU
registers and that is not cleared until the bottom half completes, new
top halves from other VFs may reschedule a second bottom half for
previous interrupts.
This patch solves the problem in the ISR handler by not considering
sources with already disabled interrupts (and processing pending), as
set in the ERRMSK registers.
Also, move some definitions where actually needed.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Giovanni Cabiddu [Thu, 12 Aug 2021 20:21:15 +0000 (21:21 +0100)]
crypto: qat - prevent spurious MSI interrupt in VF
QAT GEN2 devices suffer from a defect where the MSI interrupt can be
sent multiple times.
If the second (spurious) interrupt is handled before the bottom half
handler runs, then the extra interrupt is effectively ignored because
the bottom half is only scheduled once.
However, if the top half runs again after the bottom half runs, this
will appear as a spurious PF to VF interrupt.
This can be avoided by checking the interrupt mask register in addition
to the interrupt source register in the interrupt handler.
This patch is based on earlier work done by Conor McLoughlin.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Co-developed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Giovanni Cabiddu [Thu, 12 Aug 2021 20:21:14 +0000 (21:21 +0100)]
crypto: qat - handle both source of interrupt in VF ISR
The top half of the VF drivers handled only a source at the time.
If an interrupt for PF2VF and bundle occurred at the same time, the ISR
scheduled only the bottom half for PF2VF.
This patch fixes the VF top half so that if both sources of interrupt
trigger at the same time, both bottom halves are scheduled.
This patch is based on earlier work done by Conor McLoughlin.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Giovanni Cabiddu [Thu, 12 Aug 2021 20:21:13 +0000 (21:21 +0100)]
crypto: qat - do not ignore errors from enable_vf2pf_comms()
The function adf_dev_init() ignores the error code reported by
enable_vf2pf_comms(). If the latter fails, e.g. the VF is not compatible
with the pf, then the load of the VF driver progresses.
This patch changes adf_dev_init() so that the error code from
enable_vf2pf_comms() is returned to the caller.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Marco Chiappero [Thu, 12 Aug 2021 20:21:12 +0000 (21:21 +0100)]
crypto: qat - enable interrupts only after ISR allocation
Enable device interrupts after the setup of the interrupt handlers.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Marco Chiappero [Thu, 12 Aug 2021 20:21:11 +0000 (21:21 +0100)]
crypto: qat - remove empty sriov_configure()
Remove the empty implementation of sriov_configure() and set the
sriov_configure member of the pci_driver structure to NULL.
This way, if a user tries to enable VFs on a device, when kernel and
driver are built with CONFIG_PCI_IOV=n, the kernel reports an error
message saying that the driver does not support SRIOV configuration via
sysfs.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Giovanni Cabiddu [Thu, 12 Aug 2021 20:21:10 +0000 (21:21 +0100)]
crypto: qat - use proper type for vf_mask
Replace vf_mask type with unsigned long to avoid a stack-out-of-bound.
This is to fix the following warning reported by KASAN the first time
adf_msix_isr_ae() gets called.
[ 692.091987] BUG: KASAN: stack-out-of-bounds in find_first_bit+0x28/0x50
[ 692.092017] Read of size 8 at addr
ffff88afdf789e60 by task swapper/32/0
[ 692.092076] Call Trace:
[ 692.092089] <IRQ>
[ 692.092101] dump_stack+0x9c/0xcf
[ 692.092132] print_address_description.constprop.0+0x18/0x130
[ 692.092164] ? find_first_bit+0x28/0x50
[ 692.092185] kasan_report.cold+0x7f/0x111
[ 692.092213] ? static_obj+0x10/0x80
[ 692.092234] ? find_first_bit+0x28/0x50
[ 692.092262] find_first_bit+0x28/0x50
[ 692.092288] adf_msix_isr_ae+0x16e/0x230 [intel_qat]
Fixes:
ed8ccaef52fa ("crypto: qat - Add support for SRIOV")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Christophe JAILLET [Thu, 12 Aug 2021 08:18:16 +0000 (09:18 +0100)]
crypto: qat - fix a typo in a comment
s/Enable/Disable/ when describing 'adf_disable_aer()'
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Christophe JAILLET [Thu, 12 Aug 2021 08:18:15 +0000 (09:18 +0100)]
crypto: qat - disable AER if an error occurs in probe functions
If an error occurs after a 'adf_enable_aer()' call, it must be undone by a
corresponding 'adf_disable_aer()' call, as already done in the remove
function.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Giovanni Cabiddu [Thu, 12 Aug 2021 08:18:14 +0000 (09:18 +0100)]
crypto: qat - set DMA mask to 48 bits for Gen2
Change the DMA mask from 64 to 48 for Gen2 devices as they cannot handle
addresses greater than 48 bits.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Christophe JAILLET [Thu, 12 Aug 2021 08:18:13 +0000 (09:18 +0100)]
crypto: qat - simplify code and axe the use of a deprecated API
The wrappers in include/linux/pci-dma-compat.h should go away.
Replace 'pci_set_dma_mask/pci_set_consistent_dma_mask' by an equivalent
and less verbose 'dma_set_mask_and_coherent()' call.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ben Hutchings [Wed, 11 Aug 2021 00:06:09 +0000 (02:06 +0200)]
crypto: omap - Fix inconsistent locking of device lists
lockdep complains that in omap-aes, the list_lock is taken both with
softirqs enabled at probe time, and also in softirq context, which
could lead to a deadlock:
================================
WARNING: inconsistent lock state
5.14.0-rc1-00035-gc836005b01c5-dirty #69 Not tainted
--------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
ksoftirqd/0/7 [HC0[0]:SC1[3]:HE1:SE0] takes:
bf00e014 (list_lock){+.?.}-{2:2}, at: omap_aes_find_dev+0x18/0x54 [omap_aes_driver]
{SOFTIRQ-ON-W} state was registered at:
_raw_spin_lock+0x40/0x50
omap_aes_probe+0x1d4/0x664 [omap_aes_driver]
platform_probe+0x58/0xb8
really_probe+0xbc/0x314
__driver_probe_device+0x80/0xe4
driver_probe_device+0x30/0xc8
__driver_attach+0x70/0xf4
bus_for_each_dev+0x70/0xb4
bus_add_driver+0xf0/0x1d4
driver_register+0x74/0x108
do_one_initcall+0x84/0x2e4
do_init_module+0x5c/0x240
load_module+0x221c/0x2584
sys_finit_module+0xb0/0xec
ret_fast_syscall+0x0/0x2c
0xbed90b30
irq event stamp: 111800
hardirqs last enabled at (111800): [<
c02a21e4>] __kmalloc+0x484/0x5ec
hardirqs last disabled at (111799): [<
c02a21f0>] __kmalloc+0x490/0x5ec
softirqs last enabled at (111776): [<
c01015f0>] __do_softirq+0x2b8/0x4d0
softirqs last disabled at (111781): [<
c0135948>] run_ksoftirqd+0x34/0x50
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(list_lock);
<Interrupt>
lock(list_lock);
*** DEADLOCK ***
2 locks held by ksoftirqd/0/7:
#0:
c0f5e8c8 (rcu_read_lock){....}-{1:2}, at: netif_receive_skb+0x6c/0x260
#1:
c0f5e8c8 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0x2c/0xdc
stack backtrace:
CPU: 0 PID: 7 Comm: ksoftirqd/0 Not tainted 5.14.0-rc1-00035-gc836005b01c5-dirty #69
Hardware name: Generic AM43 (Flattened Device Tree)
[<
c010e6e0>] (unwind_backtrace) from [<
c010b9d0>] (show_stack+0x10/0x14)
[<
c010b9d0>] (show_stack) from [<
c017c640>] (mark_lock.part.17+0x5bc/0xd04)
[<
c017c640>] (mark_lock.part.17) from [<
c017d9e4>] (__lock_acquire+0x960/0x2fa4)
[<
c017d9e4>] (__lock_acquire) from [<
c0180980>] (lock_acquire+0x10c/0x358)
[<
c0180980>] (lock_acquire) from [<
c093d324>] (_raw_spin_lock_bh+0x44/0x58)
[<
c093d324>] (_raw_spin_lock_bh) from [<
bf00b258>] (omap_aes_find_dev+0x18/0x54 [omap_aes_driver])
[<
bf00b258>] (omap_aes_find_dev [omap_aes_driver]) from [<
bf00b328>] (omap_aes_crypt+0x94/0xd4 [omap_aes_driver])
[<
bf00b328>] (omap_aes_crypt [omap_aes_driver]) from [<
c08ac6d0>] (esp_input+0x1b0/0x2c8)
[<
c08ac6d0>] (esp_input) from [<
c08c9e90>] (xfrm_input+0x410/0x1290)
[<
c08c9e90>] (xfrm_input) from [<
c08b6374>] (xfrm4_esp_rcv+0x54/0x11c)
[<
c08b6374>] (xfrm4_esp_rcv) from [<
c0838840>] (ip_protocol_deliver_rcu+0x48/0x3bc)
[<
c0838840>] (ip_protocol_deliver_rcu) from [<
c0838c50>] (ip_local_deliver_finish+0x9c/0xdc)
[<
c0838c50>] (ip_local_deliver_finish) from [<
c0838dd8>] (ip_local_deliver+0x148/0x1b0)
[<
c0838dd8>] (ip_local_deliver) from [<
c0838f5c>] (ip_rcv+0x11c/0x180)
[<
c0838f5c>] (ip_rcv) from [<
c077e3a4>] (__netif_receive_skb_one_core+0x54/0x74)
[<
c077e3a4>] (__netif_receive_skb_one_core) from [<
c077e588>] (netif_receive_skb+0xa8/0x260)
[<
c077e588>] (netif_receive_skb) from [<
c068d6d4>] (cpsw_rx_handler+0x224/0x2fc)
[<
c068d6d4>] (cpsw_rx_handler) from [<
c0688ccc>] (__cpdma_chan_process+0xf4/0x188)
[<
c0688ccc>] (__cpdma_chan_process) from [<
c068a0c0>] (cpdma_chan_process+0x3c/0x5c)
[<
c068a0c0>] (cpdma_chan_process) from [<
c0690e14>] (cpsw_rx_mq_poll+0x44/0x98)
[<
c0690e14>] (cpsw_rx_mq_poll) from [<
c0780810>] (__napi_poll+0x28/0x268)
[<
c0780810>] (__napi_poll) from [<
c0780c64>] (net_rx_action+0xcc/0x204)
[<
c0780c64>] (net_rx_action) from [<
c0101478>] (__do_softirq+0x140/0x4d0)
[<
c0101478>] (__do_softirq) from [<
c0135948>] (run_ksoftirqd+0x34/0x50)
[<
c0135948>] (run_ksoftirqd) from [<
c01583b8>] (smpboot_thread_fn+0xf4/0x1d8)
[<
c01583b8>] (smpboot_thread_fn) from [<
c01546dc>] (kthread+0x14c/0x174)
[<
c01546dc>] (kthread) from [<
c010013c>] (ret_from_fork+0x14/0x38)
...
The omap-des and omap-sham drivers appear to have a similar issue.
Fix this by using spin_{,un}lock_bh() around device list access in all
the probe and remove functions.
Signed-off-by: Ben Hutchings <ben.hutchings@mind.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ben Hutchings [Wed, 11 Aug 2021 00:05:55 +0000 (02:05 +0200)]
crypto: omap - Avoid redundant copy when using truncated sg list
omap_crypto_cleanup() currently copies data from sg to orig if either
copy flag is set. However OMAP_CRYPTO_SG_COPIED means that sg refers
to the same pages as orig, truncated to len bytes. There is no need
to copy in this case.
Only copy data if the OMAP_CRYPTO_DATA_COPIED flag is set.
Fixes:
74ed87e7e7f7 ("crypto: omap - add base support library for common ...")
Signed-off-by: Ben Hutchings <ben.hutchings@mind.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Randy Dunlap [Sun, 8 Aug 2021 20:52:33 +0000 (13:52 -0700)]
crypto: wp512 - correct a non-kernel-doc comment
Don't use "/**" to begin a comment that is not kernel-doc notation.
crypto/wp512.c:779: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* The core Whirlpool transform.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Weili Qian [Sat, 7 Aug 2021 06:29:11 +0000 (14:29 +0800)]
crypto: hisilicon - enable hpre device clock gating
Kunpeng930 hpre device supports dynamic clock gating. When doing tasks,
the algorithm core is opened, and when idle, the algorithm core is closed.
This patch enables hpre dynamic clock gating by writing hardware registers.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Weili Qian [Sat, 7 Aug 2021 06:29:10 +0000 (14:29 +0800)]
crypto: hisilicon - enable sec device clock gating
Kunpeng930 sec device supports dynamic clock gating. When doing tasks,
the algorithm core is opened, and when idle, the algorithm core is closed.
This patch enables sec dynamic clock gating by writing hardware registers.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Weili Qian [Sat, 7 Aug 2021 06:29:09 +0000 (14:29 +0800)]
crypto: hisilicon - enable zip device clock gating
Kunpeng930 zip device supports dynamic clock gating. When executing tasks,
the algorithm core is opened, and when idle, the algorithm core is closed.
This patch enables zip dynamic clock gating by writing hardware registers.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hongbo Li [Thu, 5 Aug 2021 08:53:32 +0000 (16:53 +0800)]
lib/mpi: use kcalloc in mpi_resize
We should set the additional space to 0 in mpi_resize().
So use kcalloc() instead of kmalloc_array().
In lib/mpi/ec.c:
/****************
* Resize the array of A to NLIMBS. the additional space is cleared
* (set to 0) [done by m_realloc()]
*/
int mpi_resize(MPI a, unsigned nlimbs)
Like the comment of kernel's mpi_resize() said, the additional space
need to be set to 0, but when a->d is not NULL, it does not set.
The kernel's mpi lib is from libgcrypt, the mpi resize in libgcrypt
is _gcry_mpi_resize() which set the additional space to 0.
This bug may cause mpi api which use mpi_resize() get wrong result
under the condition of using the additional space without initiation.
If this condition is not met, the bug would not be triggered.
Currently in kernel, rsa, sm2 and dh use mpi lib, and they works well,
so the bug is not triggered in these cases.
add_points_edwards() use the additional space directly, so it will
get a wrong result.
Fixes:
cdec9cb5167a ("crypto: GnuPG based MPI lib - source files (part 1)")
Signed-off-by: Hongbo Li <herberthbli@tencent.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sebastian Andrzej Siewior [Tue, 3 Aug 2021 14:16:10 +0000 (16:16 +0200)]
padata: Replace deprecated CPU-hotplug functions.
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().
Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sebastian Andrzej Siewior [Tue, 3 Aug 2021 14:15:55 +0000 (16:15 +0200)]
crypto: virtio - Replace deprecated CPU-hotplug functions.
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().
Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.
Cc: Gonglei <arei.gonglei@huawei.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: virtualization@lists.linux-foundation.org
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Jason Wang [Tue, 3 Aug 2021 12:55:25 +0000 (20:55 +0800)]
crypto: sun8i-ce - use kfree_sensitive to clear and free sensitive data
The kfree_sensitive is a kernel API to clear sensitive information
that should not be leaked to other future users of the same memory
objects and free the memory. Its function is the same as the
combination of memzero_explicit and kfree. Thus, we can replace the
combination APIs with the single kfree_sensitive API.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Andre Przywara [Sat, 31 Jul 2021 20:48:45 +0000 (21:48 +0100)]
hwrng: Add Arm SMCCC TRNG based driver
The "Arm True Random Number Generator Firmware Interface"[1] provides
an SMCCC based interface to a true hardware random number generator.
So far we are using that in arch_get_random_seed(), but it might be
useful to expose the entropy through the /dev/hwrng device as well. This
allows to assess the quality of the implementation, by using "rngtest"
from the rng-tools package, for example.
Add a simple platform driver implementing the hw_random interface.
The corresponding platform device is created by the SMCCC core code,
we just match it here by name and provide a module alias.
Since the firmware takes care about serialisation, this can happily
coexist with the arch_get_random_seed() bits.
[1] https://developer.arm.com/documentation/den0098/latest/
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Andre Przywara [Sat, 31 Jul 2021 20:48:44 +0000 (21:48 +0100)]
firmware: smccc: Register smccc_trng platform device
At the moment we probe for the Random Number Generator SMCCC service,
and use that in the core code (arch_get_random). However the hardware
entropy can also be useful to access from userland, and be it to assess
its quality.
Register a platform device when the SMCCC TRNG service is detected, to
allow a hw_random driver to hook onto this.
The function registering the device is deliberately made in a way which
allows expansion, so other services that could be exposed via a platform
device (or some other interface), can be added here easily.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Brijesh Singh [Wed, 28 Jul 2021 15:15:21 +0000 (10:15 -0500)]
crypto: ccp - shutdown SEV firmware on kexec
The commit
97f9ac3db6612 ("crypto: ccp - Add support for SEV-ES to the
PSP driver") added support to allocate Trusted Memory Region (TMR)
used during the SEV-ES firmware initialization. The TMR gets locked
during the firmware initialization and unlocked during the shutdown.
While the TMR is locked, access to it is disallowed.
Currently, the CCP driver does not shutdown the firmware during the
kexec reboot, leaving the TMR memory locked.
Register a callback to shutdown the SEV firmware on the kexec boot.
Fixes:
97f9ac3db6612 ("crypto: ccp - Add support for SEV-ES to the PSP driver")
Reported-by: Lucas Nussbaum <lucas.nussbaum@inria.fr>
Tested-by: Lucas Nussbaum <lucas.nussbaum@inria.fr>
Cc: <stable@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tony Lindgren [Tue, 27 Jul 2021 10:23:39 +0000 (13:23 +0300)]
crypto: omap-sham - drop pm_runtime_irqsafe() usage
Commit
b0a3d8986a76 ("crypto: omap-sham - Use pm_runtime_irq_safe()") added
the use of pm_runtime_irq_safe() as pm_runtime_get_sync() was called
from a tasklet.
We now use the crypto engine queue instead of a custom queue since
commit
33c3d434d91 ("crypto: omap-sham - convert to use crypto engine").
We want to drop the use of pm_runtime_irq_safe() in general as it takes a
permanent usage count on the parent device causing issues for power
management.
Based on testing with CONFIG_DEBUG_ATOMIC_SLEEP=y, modprobe omap-sham,
followed by modprobe tcrypt sec=1 mode=423, I have not been able to
reproduce the scheduling while atomic issue seen earlier with current
kernels and we can just drop the call to pm_runtime_irq_safe().
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tony Lindgren [Tue, 27 Jul 2021 10:23:38 +0000 (13:23 +0300)]
crypto: omap-sham - drop suspend and resume functions
Let's get rid of the suspend and resume calls to runtime PM as these calls
do not idle the hardware. The runtime suspend has been disabled for
system suspend since commit
88d26136a256 ("PM: Prevent runtime suspend
during system resume").
Instead of runtime PM, the system suspend and resume functions should call
driver internal shared functions to idle the hardware as needed.
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tony Lindgren [Tue, 27 Jul 2021 10:23:37 +0000 (13:23 +0300)]
crypto: omap-sham - drop old hw_init and unused FLAGS_INIT
FLAGS_INIT is now unused and we can just use standard runtime PM
functions instead.
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tony Lindgren [Tue, 27 Jul 2021 10:23:36 +0000 (13:23 +0300)]
crypto: omap-sham - add missing pm_runtime_dontuse_autosuspend()
We should pair the usage of pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend().
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tony Lindgren [Tue, 27 Jul 2021 10:23:35 +0000 (13:23 +0300)]
crypto: omap-sham - initialize req only after omap_sham_hw_init()
Let's only initialize dd->req after omap_sham_hw_init() in case of
errors.
Looks like leaving dd->req initialized on omap_sham_hw_init() errors is
is not causing issues though as we return on errors. So this patch can be
applied as clean-up.
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tony Lindgren [Tue, 27 Jul 2021 10:23:34 +0000 (13:23 +0300)]
crypto: omap-sham - clear dma flags only after omap_sham_update_dma_stop()
We should not clear FLAGS_DMA_ACTIVE before omap_sham_update_dma_stop() is
done calling dma_unmap_sg(). We already clear FLAGS_DMA_ACTIVE at the
end of omap_sham_update_dma_stop().
The early clearing of FLAGS_DMA_ACTIVE is not causing issues as we do not
need to defer anything based on FLAGS_DMA_ACTIVE currently. So this can be
applied as clean-up.
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Salah Triki [Thu, 22 Jul 2021 17:08:27 +0000 (18:08 +0100)]
crypto: atmel-aes - use swap()
Use swap() instead of implementing it in order to make code more clean.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Mian Yousaf Kaukab [Wed, 21 Jul 2021 08:39:05 +0000 (10:39 +0200)]
crypto: ecc - handle unaligned input buffer in ecc_swap_digits
ecdsa_set_pub_key() makes an u64 pointer at 1 byte offset of the key.
This results in an unaligned u64 pointer. This pointer is passed to
ecc_swap_digits() which assumes natural alignment.
This causes a kernel crash on an armv7 platform:
[ 0.409022] Unhandled fault: alignment exception (0x001) at 0xc2a0a6a9
...
[ 0.416982] PC is at ecdsa_set_pub_key+0xdc/0x120
...
[ 0.491492] Backtrace:
[ 0.492059] [<
c07c266c>] (ecdsa_set_pub_key) from [<
c07c75d4>] (test_akcipher_one+0xf4/0x6c0)
Handle unaligned input buffer in ecc_swap_digits() by replacing
be64_to_cpu() to get_unaligned_be64(). Change type of in pointer to
void to reflect it doesn’t necessarily need to be aligned.
Fixes:
4e6602916bc6 ("crypto: ecdsa - Add support for ECDSA signature verification")
Reported-by: Guillaume Gardet <guillaume.gardet@arm.com>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Xiyu Yang [Tue, 20 Jul 2021 15:05:11 +0000 (11:05 -0400)]
padata: Convert from atomic_t to refcount_t on parallel_data->refcnt
refcount_t type and corresponding API can protect refcounters from
accidental underflow and overflow and further use-after-free situations.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Jason Wang [Tue, 20 Jul 2021 13:01:04 +0000 (21:01 +0800)]
crypto: sun8i-ss - Use kfree_sensitive
The kfree_sensitive is a kernel API to clear sensitive information
that should not be leaked to other future users of the same memory
objects and free the memory. Its function is the same as the
combination of memzero_explicit and kfree. Thus, we can replace the
combination APIs with the single kfree_sensitive API.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tudor Ambarus [Tue, 20 Jul 2021 08:55:35 +0000 (11:55 +0300)]
crypto: atmel-aes - Allocate aes dev at tfm init time
Allocate the atmel_aes_dev data at tfm init time, and not for
each crypt request.
There's a single AES IP per SoC, clarify that in the code.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tudor Ambarus [Tue, 20 Jul 2021 08:55:34 +0000 (11:55 +0300)]
crypto: atmel-aes - Add fallback to XTS software implementation
XTS is supported just for input lengths with data units of 128-bit blocks.
Add a fallback to software implementation when the last block is shorter
than 128 bits.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tudor Ambarus [Tue, 20 Jul 2021 08:55:33 +0000 (11:55 +0300)]
crypto: atmel - Set OFB's blocksize to 1
Set cra_blocksize to 1 to indicate OFB is a stream cipher.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tudor Ambarus [Tue, 20 Jul 2021 08:55:32 +0000 (11:55 +0300)]
crypto: atmel-tdes - Add FIPS81's zero length cryptlen constraint
FIPS81 requires for the ECB, CBC, CFB, and OFB modes that the
plaintext and ciphertext to have a positive integer length.
Add this constraint and just return 0 for a zero length cryptlen.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tudor Ambarus [Tue, 20 Jul 2021 08:55:31 +0000 (11:55 +0300)]
crypto: atmel-aes - Add NIST 800-38A's zero length cryptlen constraint
NIST 800-38A requires for the ECB, CBC, CFB, OFB and CTR modes that
the plaintext and ciphertext to have a positive integer length.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tudor Ambarus [Tue, 20 Jul 2021 08:55:30 +0000 (11:55 +0300)]
crypto: atmel-aes - Add XTS input length constraint
Input length smaller than block size does not make sense for XTS.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tudor Ambarus [Tue, 20 Jul 2021 08:55:29 +0000 (11:55 +0300)]
crypto: atmel-aes - Add blocksize constraint for ECB and CBC modes
NIST 800-38A requires for the ECB and CBC modes that the total number
of bits in the plaintext to be a multiple of the block cipher.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tudor Ambarus [Tue, 20 Jul 2021 08:55:28 +0000 (11:55 +0300)]
crypto: atmel-tdes - Handle error messages
Downgrade all runtime error messages to dev_dbg so that we don't
pollute the console. All probe error messages are kept with dev_err.
Get rid of pr_err and use dev_dbg instead, so that we know from which
device the error comes.
dma_mapping_error() return code was overwritten, use the error code
that the function returns.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tudor Ambarus [Tue, 20 Jul 2021 08:55:27 +0000 (11:55 +0300)]
crypto: atmel-tdes - Clarify how tdes dev gets allocated to the tfm
The tdes dev gets allocated to the tfm at alg->init time, there's no
need to overwrite the pointer to tdes_dd afterwards.
There's a single IP per SoC anyway, the first entry from the
atmel_tdes.dev_list is chosen without counting for tfms for example,
in case one thinks of an even distribution of tfms across the TDES
IPs: there's only one. At alg->init time the ctx->dd should already
be NULL, there's no need to check its value before requesting for a
tdes dev.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tianjia Zhang [Tue, 20 Jul 2021 03:46:42 +0000 (11:46 +0800)]
crypto: tcrypt - add the asynchronous speed test for SM4
tcrypt supports testing of SM4 cipher algorithms that use avx
instruction set acceleration. The implementation of sm4 instruction
set acceleration supports up to 8 blocks in parallel encryption and
decryption, which is 128 bytes. Therefore, the 128-byte block size
is also added to block_sizes.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tianjia Zhang [Tue, 20 Jul 2021 03:46:41 +0000 (11:46 +0800)]
crypto: x86/sm4 - add AES-NI/AVX/x86_64 implementation
This patch adds AES-NI/AVX/x86_64 assembler implementation of SM4
block cipher. Through two affine transforms, we can use the AES S-Box
to simulate the SM4 S-Box to achieve the effect of instruction
acceleration.
The main algorithm implementation comes from SM4 AES-NI work by
libgcrypt and Markku-Juhani O. Saarinen at:
https://github.com/mjosaarinen/sm4ni
This optimization supports the four modes of SM4, ECB, CBC, CFB, and
CTR. Since CBC and CFB do not support multiple block parallel
encryption, the optimization effect is not obvious.
Benchmark on Intel Xeon Cascadelake, the data comes from the 218 mode
and 518 mode of tcrypt. The abscissas are blocks of different lengths.
The data is tabulated and the unit is Mb/s:
sm4-generic | 16 64 128 256 1024 1420 4096
ECB enc | 40.99 46.50 48.05 48.41 49.20 49.25 49.28
ECB dec | 41.07 46.99 48.15 48.67 49.20 49.25 49.29
CBC enc | 37.71 45.28 46.77 47.60 48.32 48.37 48.40
CBC dec | 36.48 44.82 46.43 47.45 48.23 48.30 48.36
CFB enc | 37.94 44.84 46.12 46.94 47.57 47.46 47.68
CFB dec | 37.50 42.84 43.74 44.37 44.85 44.80 44.96
CTR enc | 39.20 45.63 46.75 47.49 48.09 47.85 48.08
CTR dec | 39.64 45.70 46.72 47.47 47.98 47.88 48.06
sm4-aesni-avx
ECB enc | 33.75 134.47 221.64 243.43 264.05 251.58 258.13
ECB dec | 34.02 134.92 223.11 245.14 264.12 251.04 258.33
CBC enc | 38.85 46.18 47.67 48.34 49.00 48.96 49.14
CBC dec | 33.54 131.29 223.88 245.27 265.50 252.41 263.78
CFB enc | 38.70 46.10 47.58 48.29 49.01 48.94 49.19
CFB dec | 32.79 128.40 223.23 244.87 265.77 253.31 262.79
CTR enc | 32.58 122.23 220.29 241.16 259.57 248.32 256.69
CTR dec | 32.81 122.47 218.99 241.54 258.42 248.58 256.61
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tianjia Zhang [Tue, 20 Jul 2021 03:46:40 +0000 (11:46 +0800)]
crypto: arm64/sm4-ce - Make dependent on sm4 library instead of sm4-generic
SM4 library is abstracted from sm4-generic algorithm, sm4-ce can depend on
the SM4 library instead of sm4-generic, and some functions in sm4-generic
do not need to be exported.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tianjia Zhang [Tue, 20 Jul 2021 03:46:39 +0000 (11:46 +0800)]
crypto: sm4 - create SM4 library based on sm4 generic code
Take the existing small footprint and mostly time invariant C code
and turn it into a SM4 library that can be used for non-performance
critical, casual use of SM4, and as a fallback for, e.g., SIMD code
that needs a secondary path that can be taken in contexts where the
SIMD unit is off limits.
Secondly, some codes have been optimized, such as unrolling small
times loop, removing unnecessary memory shifts, exporting sbox, fk,
ck arrays, and basic encryption and decryption functions.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 16 Jul 2021 16:54:03 +0000 (18:54 +0200)]
crypto: x86/aes-ni - add missing error checks in XTS code
The updated XTS code fails to check the return code of skcipher_walk_virt,
which may lead to skcipher_walk_abort() or skcipher_walk_done() being called
while the walk argument is in an inconsistent state.
So check the return value after each such call, and bail on errors.
Fixes:
2481104fe98d ("crypto: x86/aes-ni-xts - rewrite and drop indirections via glue helper")
Reported-by: Dave Hansen <dave.hansen@intel.com>
Reported-by: syzbot <syzbot+5d1bad8042a8f0e8117a@syzkaller.appspotmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Randy Dunlap [Sun, 11 Jul 2021 22:31:45 +0000 (15:31 -0700)]
crypto: lib - rename 'mod_init' & 'mod_exit' functions to be module-specific
Rename module_init & module_exit functions that are named
"mod_init" and "mod_exit" so that they are unique in both the
System.map file and in initcall_debug output instead of showing
up as almost anonymous "mod_init".
This is helpful for debugging and in determining how long certain
module_init calls take to execute.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Randy Dunlap [Sun, 11 Jul 2021 22:31:44 +0000 (15:31 -0700)]
hwrng: rename 'mod_init' & 'mod_exit' functions to be module-specific
Rename module_init & module_exit functions that are named
"mod_init" and "mod_exit" so that they are unique in both the
System.map file and in initcall_debug output instead of showing
up as almost anonymous "mod_init".
This is helpful for debugging and in determining how long certain
module_init calls take to execute.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andres Salomon <dilinger@queued.net>
Cc: linux-geode@lists.infradead.org
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Randy Dunlap [Sun, 11 Jul 2021 22:31:43 +0000 (15:31 -0700)]
crypto: arm/curve25519 - rename 'mod_init' & 'mod_exit' functions to be module-specific
Rename module_init & module_exit functions that are named
"mod_init" and "mod_exit" so that they are unique in both the
System.map file and in initcall_debug output instead of showing
up as almost anonymous "mod_init".
This is helpful for debugging and in determining how long certain
module_init calls take to execute.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: patches@armlinux.org.uk
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sean Anderson [Thu, 1 Jul 2021 18:56:38 +0000 (14:56 -0400)]
crypto: mxs-dcp - Use sg_mapping_iter to copy data
This uses the sg_pcopy_from_buffer to copy data, instead of doing it
ourselves.
In addition to reducing code size, this fixes the following oops
resulting from failing to kmap the page:
[ 68.896381] Unable to handle kernel NULL pointer dereference at virtual address
00000ab8
[ 68.904539] pgd =
3561adb3
[ 68.907475] [
00000ab8] *pgd=
00000000
[ 68.911153] Internal error: Oops: 805 [#1] ARM
[ 68.915618] Modules linked in: cfg80211 rfkill des_generic libdes arc4 libarc4 cbc ecb algif_skcipher sha256_generic libsha256 sha1_generic hmac aes_generic libaes cmac sha512_generic md5 md4 algif_hash af_alg i2c_imx i2c_core ci_hdrc_imx ci_hdrc mxs_dcp ulpi roles udc_core imx_sdma usbmisc_imx usb_common firmware_class virt_dma phy_mxs_usb nf_tables nfnetlink ip_tables x_tables ipv6 autofs4
[ 68.950741] CPU: 0 PID: 139 Comm: mxs_dcp_chan/ae Not tainted 5.10.34 #296
[ 68.958501] Hardware name: Freescale i.MX6 Ultralite (Device Tree)
[ 68.964710] PC is at memcpy+0xa8/0x330
[ 68.968479] LR is at 0xd7b2bc9d
[ 68.971638] pc : [<
c053e7c8>] lr : [<
d7b2bc9d>] psr:
000f0013
[ 68.977920] sp :
c2cbbee4 ip :
00000010 fp :
00000010
[ 68.983159] r10:
00000000 r9 :
c3283a40 r8 :
1a5a6f08
[ 68.988402] r7 :
4bfe0ecc r6 :
76d8a220 r5 :
c32f9050 r4 :
00000001
[ 68.994945] r3 :
00000ab8 r2 :
fffffff0 r1 :
c32f9050 r0 :
00000ab8
[ 69.001492] Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 69.008646] Control:
10c53c7d Table:
83664059 DAC:
00000051
[ 69.014414] Process mxs_dcp_chan/ae (pid: 139, stack limit = 0x667b57ab)
[ 69.021133] Stack: (0xc2cbbee4 to 0xc2cbc000)
[ 69.025519] bee0:
c32f9050 c3235408 00000010 00000010 00000ab8 00000001 bf10406c
[ 69.033720] bf00:
00000000 00000000 00000010 00000000 c32355d0 832fb080 00000000 c13de2fc
[ 69.041921] bf20:
c3628010 00000010 c33d5780 00000ab8 bf1067e8 00000002 c21e5010 c2cba000
[ 69.050125] bf40:
c32f8040 00000000 bf106a40 c32f9040 c3283a80 00000001 bf105240 c3234040
[ 69.058327] bf60:
ffffe000 c3204100 c2c69800 c2cba000 00000000 bf103b84 00000000 c2eddc54
[ 69.066530] bf80:
c3204144 c0140d1c c2cba000 c2c69800 c0140be8 00000000 00000000 00000000
[ 69.074730] bfa0:
00000000 00000000 00000000 c0100114 00000000 00000000 00000000 00000000
[ 69.082932] bfc0:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 69.091131] bfe0:
00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[ 69.099364] [<
c053e7c8>] (memcpy) from [<
bf10406c>] (dcp_chan_thread_aes+0x4e8/0x840 [mxs_dcp])
[ 69.108117] [<
bf10406c>] (dcp_chan_thread_aes [mxs_dcp]) from [<
c0140d1c>] (kthread+0x134/0x160)
[ 69.116941] [<
c0140d1c>] (kthread) from [<
c0100114>] (ret_from_fork+0x14/0x20)
[ 69.124178] Exception stack(0xc2cbbfb0 to 0xc2cbbff8)
[ 69.129250] bfa0:
00000000 00000000 00000000 00000000
[ 69.137450] bfc0:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 69.145648] bfe0:
00000000 00000000 00000000 00000000 00000013 00000000
[ 69.152289] Code:
e320f000 e4803004 e4804004 e4805004 (
e4806004)
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sean Anderson [Thu, 1 Jul 2021 18:56:37 +0000 (14:56 -0400)]
crypto: mxs-dcp - Check for DMA mapping errors
After calling dma_map_single(), we must also call dma_mapping_error().
This fixes the following warning when compiling with CONFIG_DMA_API_DEBUG:
[ 311.241478] WARNING: CPU: 0 PID: 428 at kernel/dma/debug.c:1027 check_unmap+0x79c/0x96c
[ 311.249547] DMA-API: mxs-dcp 2280000.crypto: device driver failed to check map error[device address=0x00000000860cb080] [size=32 bytes] [mapped as single]
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stephan Mueller [Wed, 30 Jun 2021 10:32:52 +0000 (12:32 +0200)]
crypto: drbg - select SHA512
With the swtich to use HMAC(SHA-512) as the default DRBG type, the
configuration must now also select SHA-512.
Fixes:
9b7b94683a9b "crypto: DRBG - switch to HMAC SHA512 DRBG as default
DRBG"
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Stephan Mueller <smueller@chronox.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Linus Torvalds [Sun, 11 Jul 2021 22:07:40 +0000 (15:07 -0700)]
Linux 5.14-rc1
Hugh Dickins [Wed, 7 Jul 2021 20:13:33 +0000 (13:13 -0700)]
mm/rmap: try_to_migrate() skip zone_device !device_private
I know nothing about zone_device pages and !device_private pages; but if
try_to_migrate_one() will do nothing for them, then it's better that
try_to_migrate() filter them first, than trawl through all their vmas.
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://lore.kernel.org/lkml/1241d356-8ec9-f47b-a5ec-9b2bf66d242@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Wed, 7 Jul 2021 20:11:24 +0000 (13:11 -0700)]
mm/rmap: fix new bug: premature return from page_mlock_one()
In the unlikely race case that page_mlock_one() finds VM_LOCKED has been
cleared by the time it got page table lock, page_vma_mapped_walk_done()
must be called before returning, either explicitly, or by a final call
to page_vma_mapped_walk() - otherwise the page table remains locked.
Fixes:
cd62734ca60d ("mm/rmap: split try_to_munlock from try_to_unmap")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/lkml/20210711151446.GB4070@xsang-OptiPlex-9020/
Link: https://lore.kernel.org/lkml/f71f8523-cba7-3342-40a7-114abc5d1f51@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Wed, 7 Jul 2021 20:08:53 +0000 (13:08 -0700)]
mm/rmap: fix old bug: munlocking THP missed other mlocks
The kernel recovers in due course from missing Mlocked pages: but there
was no point in calling page_mlock() (formerly known as
try_to_munlock()) on a THP, because nothing got done even when it was
found to be mapped in another VM_LOCKED vma.
It's true that we need to be careful: Mlocked accounting of pte-mapped
THPs is too difficult (so consistently avoided); but Mlocked accounting
of only-pmd-mapped THPs is supposed to work, even when multiple mappings
are mlocked and munlocked or munmapped. Refine the tests.
There is already a VM_BUG_ON_PAGE(PageDoubleMap) in page_mlock(), so
page_mlock_one() does not even have to worry about that complication.
(I said the kernel recovers: but would page reclaim be likely to split
THP before rediscovering that it's VM_LOCKED? I've not followed that up)
Fixes:
9a73f61bdb8a ("thp, mlock: do not mlock PTE-mapped file huge pages")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/lkml/cfa154c-d595-406-eb7d-eb9df730f944@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Wed, 7 Jul 2021 20:06:17 +0000 (13:06 -0700)]
mm/rmap: fix comments left over from recent changes
Parallel developments in mm/rmap.c have left behind some out-of-date
comments: try_to_migrate_one() also accepts TTU_SYNC (already commented
in try_to_migrate() itself), and try_to_migrate() returns nothing at
all.
TTU_SPLIT_FREEZE has just been deleted, so reword the comment about it
in mm/huge_memory.c; and TTU_IGNORE_ACCESS was removed in 5.11, so
delete the "recently referenced" comment from try_to_unmap_one() (once
upon a time the comment was near the removed codeblock, but they drifted
apart).
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://lore.kernel.org/lkml/563ce5b2-7a44-5b4d-1dfd-59a0e65932a9@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 11 Jul 2021 18:17:57 +0000 (11:17 -0700)]
Merge tag 'irq-urgent-2021-07-11' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Two fixes:
- Fix a MIPS IRQ handling RCU bug
- Remove a DocBook annotation for a parameter that doesn't exist
anymore"
* tag 'irq-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mips: Fix RCU violation when using irqdomain lookup on interrupt entry
genirq/irqdesc: Drop excess kernel-doc entry @lookup
Linus Torvalds [Sun, 11 Jul 2021 18:13:57 +0000 (11:13 -0700)]
Merge tag 'sched-urgent-2021-07-11' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Three fixes:
- Fix load tracking bug/inconsistency
- Fix a sporadic CFS bandwidth constraints enforcement bug
- Fix a uclamp utilization tracking bug for newly woken tasks"
* tag 'sched-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/uclamp: Ignore max aggregation if rq is idle
sched/fair: Fix CFS bandwidth hrtimer expiry type
sched/fair: Sync load_sum with load_avg after dequeue
Linus Torvalds [Sun, 11 Jul 2021 18:10:48 +0000 (11:10 -0700)]
Merge tag 'perf-urgent-2021-07-11' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"A fix and a hardware-enablement addition:
- Robustify uncore_snbep's skx_iio_set_mapping()'s error cleanup
- Add cstate event support for Intel ICELAKE_X and ICELAKE_D"
* tag 'perf-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Clean up error handling path of iio mapping
perf/x86/cstate: Add ICELAKE_X and ICELAKE_D support
Linus Torvalds [Sun, 11 Jul 2021 18:06:09 +0000 (11:06 -0700)]
Merge tag 'locking-urgent-2021-07-11' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
- Fix a Sparc crash
- Fix a number of objtool warnings
- Fix /proc/lockdep output on certain configs
- Restore a kprobes fail-safe
* tag 'locking-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomic: sparc: Fix arch_cmpxchg64_local()
kprobe/static_call: Restore missing static_call_text_reserved()
static_call: Fix static_call_text_reserved() vs __init
jump_label: Fix jump_label_text_reserved() vs __init
locking/lockdep: Fix meaningless /proc/lockdep output of lock classes on !CONFIG_PROVE_LOCKING
Linus Torvalds [Sun, 11 Jul 2021 17:59:53 +0000 (10:59 -0700)]
Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This is a set of minor fixes and clean ups in the core and various
drivers.
The only core change in behaviour is the I/O retry for spinup notify,
but that shouldn't impact anything other than the failing case"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
scsi: virtio_scsi: Add validation for residual bytes from response
scsi: ipr: System crashes when seeing type 20 error
scsi: core: Retry I/O for Notify (Enable Spinup) Required error
scsi: mpi3mr: Fix warnings reported by smatch
scsi: qedf: Add check to synchronize abort and flush
scsi: MAINTAINERS: Add mpi3mr driver maintainers
scsi: libfc: Fix array index out of bound exception
scsi: mvsas: Use DEVICE_ATTR_RO()/RW() macro
scsi: megaraid_mbox: Use DEVICE_ATTR_ADMIN_RO() macro
scsi: qedf: Use DEVICE_ATTR_RO() macro
scsi: qedi: Use DEVICE_ATTR_RO() macro
scsi: message: mptfc: Switch from pci_ to dma_ API
scsi: be2iscsi: Fix some missing space in some messages
scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe()
scsi: ufs: Fix build warning without CONFIG_PM
scsi: bnx2fc: Remove meaningless bnx2fc_abts_cleanup() return value assignment
scsi: qla2xxx: Add heartbeat check
scsi: virtio_scsi: Do not overwrite SCSI status
scsi: libsas: Add LUN number check in .slave_alloc callback
scsi: core: Inline scsi_mq_alloc_queue()
...
Linus Torvalds [Sun, 11 Jul 2021 17:54:24 +0000 (10:54 -0700)]
Merge tag 'perf-tools-for-v5.14-2021-07-10' of git://git./linux/kernel/git/acme/linux
Pull more perf tool updates from Arnaldo Carvalho de Melo:
"New features:
- Enable use of BPF counters with 'perf stat --for-each-cgroup',
using per-CPU 'cgroup-switch' events with an attached BPF program
that does aggregation per-cgroup in the kernel instead of using
per-cgroup perf events.
- Add Topdown metrics L2 events as default events in 'perf stat' for
systems having those events.
Hardware tracing:
- Add a config for max loops without consuming a packet in the Intel
PT packet decoder, set via 'perf config intel-pt.max-loops=N'
Hardware enablement:
- Disable misleading NMI watchdog message in 'perf stat' on hybrid
systems such as Intel Alder Lake.
- Add a dummy event on hybrid systems to collect metadata records.
- Add 24x7 nest metric events for the Power10 platform.
Fixes:
- Fix event parsing for PMUs starting with the same prefix.
- Fix the 'perf trace' 'trace' alias installation dir.
- Fix buffer size to report iregs in perf script python scripts,
supporting the extended registers in PowerPC.
- Fix overflow in elf_sec__is_text().
- Fix 's' on source line when disasm is empty in the annotation TUI,
accessible via 'perf annotate', 'perf report' and 'perf top'.
- Plug leaks in scandir() returned dirent entries in 'perf test' when
sorting the shell tests.
- Fix --task and --stat with pipe input in 'perf report'.
- Fix 'perf probe' use of debuginfo files by build id.
- If a DSO has both dynsym and symtab ELF sections, read from both
when loading the symbol table, fixing a problem processing Fedora
32 glibc DSOs.
Libraries:
- Add grouping of events to libperf, from code in tools/perf,
allowing libperf users to use that mode.
Misc:
- Filter plt stubs from the 'perf probe --functions' output.
- Update UAPI header copies for asound, DRM, mman-common.h and the
ones affected by the quotactl_fd syscall"
* tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (29 commits)
perf test: Add free() calls for scandir() returned dirent entries
libperf: Add tests for perf_evlist__set_leader()
libperf: Remove BUG_ON() from library code in get_group_fd()
libperf: Add group support to perf_evsel__open()
perf tools: Fix pattern matching for same substring in different PMU type
perf record: Add a dummy event on hybrid systems to collect metadata records
perf stat: Add Topdown metrics L2 events as default events
libperf: Adopt evlist__set_leader() from tools/perf as perf_evlist__set_leader()
libperf: Move 'nr_groups' from tools/perf to evlist::nr_groups
libperf: Move 'leader' from tools/perf to perf_evsel::leader
libperf: Move 'idx' from tools/perf to perf_evsel::idx
libperf: Change tests to single static and shared binaries
perf intel-pt: Add a config for max loops without consuming a packet
perf stat: Disable the NMI watchdog message on hybrid
perf vendor events power10: Adds 24x7 nest metric events for power10 platform
perf script python: Fix buffer size to report iregs in perf script
perf trace: Fix the perf trace link location
perf top: Fix overflow in elf_sec__is_text()
perf annotate: Fix 's' on source line when disasm is empty
perf probe: Do not show @plt function by default
...
Linus Torvalds [Sat, 10 Jul 2021 23:19:10 +0000 (16:19 -0700)]
Merge tag 'rtc-5.14' of git://git./linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Mostly documentation/comment changes and non urgent fixes.
- add or fix SPDX identifiers
- NXP pcf*: fix datasheet URLs
- imxdi: add wakeup support
- pcf2127: handle timestamp interrupts, this fixes a possible
interrupt storm
- bd70528: Drop BD70528 support"
* tag 'rtc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits)
rtc: pcf8523: rename register and bit defines
rtc: pcf2127: handle timestamp interrupts
rtc: at91sam9: Remove unnecessary offset variable checks
rtc: s5m: Check return value of s5m_check_peding_alarm_interrupt()
rtc: spear: convert to SPDX identifier
rtc: tps6586x: convert to SPDX identifier
rtc: tps80031: convert to SPDX identifier
rtc: rtd119x: Fix format of SPDX identifier
rtc: sc27xx: Fix format of SPDX identifier
rtc: palmas: convert to SPDX identifier
rtc: max6900: convert to SPDX identifier
rtc: ds1374: convert to SPDX identifier
rtc: au1xxx: convert to SPDX identifier
rtc: pcf85063: Update the PCF85063A datasheet revision
dt-bindings: rtc: ti,bq32k: take maintainership
rtc: pcf8563: Fix the datasheet URL
rtc: pcf85063: Fix the datasheet URL
rtc: pcf2127: Fix the datasheet URL
dt-bindings: rtc: ti,bq32k: Convert to json-schema
dt-bindings: rtc: rx8900: Convert to YAML schema
...
Mel Gorman [Mon, 5 Jul 2021 09:51:17 +0000 (10:51 +0100)]
mm/page_alloc: Revert pahole zero-sized workaround
Commit
dbbee9d5cd83 ("mm/page_alloc: convert per-cpu list protection to
local_lock") folded in a workaround patch for pahole that was unable to
deal with zero-sized percpu structures.
A superior workaround is achieved with commit
a0b8200d06ad ("kbuild:
skip per-CPU BTF generation for pahole v1.18-v1.21").
This patch reverts the dummy field and the pahole version check.
Fixes:
dbbee9d5cd83 ("mm/page_alloc: convert per-cpu list protection to local_lock")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexandre Belloni [Sat, 10 Jul 2021 21:14:31 +0000 (23:14 +0200)]
rtc: pcf8523: rename register and bit defines
arch/arm/mach-ixp4xx/include/mach/platform.h now gets included indirectly
and defines REG_OFFSET. Rename the register and bit definition to something
specific to the driver.
Fixes:
7fd70c65faac ("ARM: irqstat: Get rid of duplicated declaration")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210710211431.1393589-1-alexandre.belloni@bootlin.com
Linus Torvalds [Sat, 10 Jul 2021 19:04:58 +0000 (12:04 -0700)]
Merge tag '5.14-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"13 cifs/smb3 fixes. Most are to address minor issues pointed out by
Coverity.
Also includes a packet signing enhancement and mount improvement"
* tag '5.14-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal version number
cifs: prevent NULL deref in cifs_compose_mount_options()
SMB3.1.1: Add support for negotiating signing algorithm
cifs: use helpers when parsing uid/gid mount options and validate them
CIFS: Clarify SMB1 code for POSIX Lock
CIFS: Clarify SMB1 code for rename open file
CIFS: Clarify SMB1 code for delete
CIFS: Clarify SMB1 code for SetFileSize
smb3: fix typo in header file
CIFS: Clarify SMB1 code for UnixSetPathInfo
CIFS: Clarify SMB1 code for UnixCreateSymLink
cifs: clarify SMB1 code for UnixCreateHardLink
cifs: make locking consistent around the server session status
Linus Torvalds [Sat, 10 Jul 2021 18:57:57 +0000 (11:57 -0700)]
Merge tag 'pci-v5.14-fixes-1' of git://git./linux/kernel/git/helgaas/pci
Pull pci fix from Bjorn Helgaas:
"Revert host bridge window patch that fixed HP EliteDesk 805 G6, but
broke ppc:sam460ex (Bjorn Helgaas)"
* tag 'pci-v5.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI: Coalesce host bridge contiguous apertures"
Linus Torvalds [Sat, 10 Jul 2021 18:53:06 +0000 (11:53 -0700)]
Merge tag 'i3c/for-5.14' of git://git./linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
- two small fixes to the svc driver
* tag 'i3c/for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: svc: fix doc warning in svc-i3c-master.c
i3c: master: svc: drop free_irq of devm_request_irq allocated irq
Linus Torvalds [Sat, 10 Jul 2021 18:43:25 +0000 (11:43 -0700)]
Merge tag 'thermal-v5.14-rc1' of git://git./linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Add rk3568 sensor support (Finley Xiao)
- Add missing MODULE_DEVICE_TABLE for the Spreadtrum sensor (Chunyan
Zhang)
- Export additionnal attributes for the int340x thermal processor
(Srinivas Pandruvada)
- Add SC7280 compatible for the tsens driver (Rajeshwari Ravindra
Kamble)
- Fix kernel documentation for thermal_zone_device_unregister() and use
devm_platform_get_and_ioremap_resource() (Yang Yingliang)
- Fix coefficient calculations for the rcar_gen3 sensor driver (Niklas
Söderlund)
- Fix shadowing variable rcar_gen3_ths_tj_1 (Geert Uytterhoeven)
- Add missing of_node_put() for the iMX and Spreadtrum sensors
(Krzysztof Kozlowski)
- Add tegra3 thermal sensor DT bindings (Dmitry Osipenko)
- Stop the thermal zone monitoring when unregistering it to prevent a
temperature update without the 'get_temp' callback (Dmitry Osipenko)
- Add rk3568 DT bindings, convert bindings to yaml schemas and add the
corresponding compatible in the Rockchip sensor (Ezequiel Garcia)
- Add the sc8180x compatible for the Qualcomm tsensor (Bjorn Andersson)
- Use the find_first_zero_bit() function instead of custom code (Andy
Shevchenko)
- Fix the kernel doc for the device cooling device (Yang Li)
- Reorg the processor thermal int340x to set the scene for the PCI mmio
driver (Srinivas Pandruvada)
- Add PCI MMIO driver for the int340x processor thermal driver
(Srinivas Pandruvada)
- Add hwmon sensors for the mediatek sensor (Frank Wunderlich)
- Fix warning for return value reported by Smatch for the int340x
thermal processor (Srinivas Pandruvada)
- Fix wrong register access and decoding for the int340x thermal
processor (Srinivas Pandruvada)
* tag 'thermal-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (23 commits)
thermal/drivers/int340x/processor_thermal: Fix tcc setting
thermal/drivers/int340x/processor_thermal: Fix warning for return value
thermal/drivers/mediatek: Add sensors-support
thermal/drivers/int340x/processor_thermal: Add PCI MMIO based thermal driver
thermal/drivers/int340x/processor_thermal: Split enumeration and processing part
thermal: devfreq_cooling: Fix kernel-doc
thermal/drivers/intel/intel_soc_dts_iosf: Switch to use find_first_zero_bit()
dt-bindings: thermal: tsens: Add sc8180x compatible
dt-bindings: rockchip-thermal: Support the RK3568 SoC compatible
dt-bindings: thermal: convert rockchip-thermal to json-schema
thermal/core/thermal_of: Stop zone device before unregistering it
dt-bindings: thermal: Add binding for Tegra30 thermal sensor
thermal/drivers/sprd: Add missing of_node_put for loop iteration
thermal/drivers/imx_sc: Add missing of_node_put for loop iteration
thermal/drivers/rcar_gen3_thermal: Do not shadow rcar_gen3_ths_tj_1
thermal/drivers/rcar_gen3_thermal: Fix coefficient calculations
thermal/drivers/st: Use devm_platform_get_and_ioremap_resource()
thermal/core: Correct function name thermal_zone_device_unregister()
dt-bindings: thermal: tsens: Add compatible string to TSENS binding for SC7280
thermal/drivers/int340x: processor_thermal: Export additional attributes
...
Linus Torvalds [Sat, 10 Jul 2021 18:01:38 +0000 (11:01 -0700)]
Merge tag 'kbuild-v5.14' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Increase the -falign-functions alignment for the debug option.
- Remove ugly libelf checks from the top Makefile.
- Make the silent build (-s) more silent.
- Re-compile the kernel if KBUILD_BUILD_TIMESTAMP is specified.
- Various script cleanups
* tag 'kbuild-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (27 commits)
scripts: add generic syscallnr.sh
scripts: check duplicated syscall number in syscall table
sparc: syscalls: use pattern rules to generate syscall headers
parisc: syscalls: use pattern rules to generate syscall headers
nds32: add arch/nds32/boot/.gitignore
kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set
kbuild: modpost: Explicitly warn about unprototyped symbols
kbuild: remove trailing slashes from $(KBUILD_EXTMOD)
kconfig.h: explain IS_MODULE(), IS_ENABLED()
kconfig: constify long_opts
scripts/setlocalversion: simplify the short version part
scripts/setlocalversion: factor out 12-chars hash construction
scripts/setlocalversion: add more comments to -dirty flag detection
scripts/setlocalversion: remove workaround for old make-kpkg
scripts/setlocalversion: remove mercurial, svn and git-svn supports
kbuild: clean up ${quiet} checks in shell scripts
kbuild: sink stdout from cmd for silent build
init: use $(call cmd,) for generating include/generated/compile.h
kbuild: merge scripts/mkmakefile to top Makefile
sh: move core-y in arch/sh/Makefile to arch/sh/Kbuild
...
Linus Torvalds [Sat, 10 Jul 2021 17:46:14 +0000 (10:46 -0700)]
Merge tag 's390-5.14-2' of git://git./linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Fix preempt_count initialization.
- Rework call_on_stack() macro to add proper type handling and avoid
possible register corruption.
- More error prone "register asm" removal and fixes.
- Fix syscall restarting when multiple signals are coming in. This adds
minimalistic trampolines to vdso so we can return from signal without
using the stack which requires pgm check handler hacks when NX is
enabled.
- Remove HAVE_IRQ_EXIT_ON_IRQ_STACK since this is no longer true after
switch to generic entry.
- Fix protected virtualization secure storage access exception
handling.
- Make machine check C handler always enter with DAT enabled and move
register validation to C code.
- Fix tinyconfig boot problem by avoiding MONITOR CALL without
CONFIG_BUG.
- Increase asm symbols alignment to 16 to make it consistent with
compilers.
- Enable concurrent access to the CPU Measurement Counter Facility.
- Add support for dynamic AP bus size limit and rework ap_dqap to deal
with messages greater than recv buffer.
* tag 's390-5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits)
s390: preempt: Fix preempt_count initialization
s390/linkage: increase asm symbols alignment to 16
s390: rename CALL_ON_STACK_NORETURN() to call_on_stack_noreturn()
s390: add type checking to CALL_ON_STACK_NORETURN() macro
s390: remove old CALL_ON_STACK() macro
s390/softirq: use call_on_stack() macro
s390/lib: use call_on_stack() macro
s390/smp: use call_on_stack() macro
s390/kexec: use call_on_stack() macro
s390/irq: use call_on_stack() macro
s390/mm: use call_on_stack() macro
s390: introduce proper type handling call_on_stack() macro
s390/irq: simplify on_async_stack()
s390/irq: inline do_softirq_own_stack()
s390/irq: simplify do_softirq_own_stack()
s390/ap: get rid of register asm in ap_dqap()
s390: rename PIF_SYSCALL_RESTART to PIF_EXECVE_PGSTE_RESTART
s390: move restart of execve() syscall
s390/signal: remove sigreturn on stack
s390/signal: switch to using vdso for sigreturn and syscall restart
...
Linus Torvalds [Sat, 10 Jul 2021 17:36:33 +0000 (10:36 -0700)]
Merge tag 'mips_5.14_1' of git://git./linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fix for accesing gic via vdso
- two build fixes
* tag 'mips_5.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: vdso: Invalid GIC access through VDSO
mips: disable branch profiling in boot/decompress.o
mips: always link byteswap helpers into decompressor
Linus Torvalds [Sat, 10 Jul 2021 17:29:35 +0000 (10:29 -0700)]
Merge tag 'arm-defconfig-5.14' of git://git./linux/kernel/git/soc/soc
Pull ARM defconfig updates from "Olof Johansson
"A set of defconfig changes, we keep them in a separate branch to avoid
conflicts between topics by separating them out.
These changes are almost exclusively turning on new drivers for
various platforms, or turning on modules for new drivers for the
shared generic configs"
* tag 'arm-defconfig-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (22 commits)
arm64: defconfig: Enable renesas usb xhci pci host controller
arm64: defconfig: Visconti: Enable GPIO
arm64: defconfig: Visconti: Enable PWM
arm64: defconfig: add drivers needed for DragonBoard410c
ARM: config: aspeed: Add DEBUG_FS and EXT4
ARM: ixp4xx_defconfig: add MTD_PHYSMAP
ARM: ixp4xx_defconfig: add CONFIG_SERIAL_OF_PLATFORM
ARM: imx_v6_v7_defconfig: Select the Wifi ath10k sdio driver
ARM: exynos_defconfig: restore framebuffer support
arm64: defconfig: Enable ARCH_R9A07G044
ARM: configs: at91_dt_defconfig: configs for sam9x60
arm64: defconfig: Enable Exynos UFS driver
arm64: defconfig: qcom: enable interconnect for SM8350
ARM: tegra_defconfig: Enable CONFIG_DEVFREQ_THERMAL
arm64: defconfig: Enable usb2_clksel for R-Car Gen3 and RZ/G2
arm64: defconfig: enable Layerscape EDAC driver
ARM: omap2plus_defconfig: Add LP5523 LED driver
ARM: omap2plus_defconfig: Add WL1251 and WEXT modules
ARM: shmobile: defconfig: Refresh for v5.13-rc1
arm64: defconfig: Allow Mediatek boards to boot from the mmc
...
Linus Torvalds [Sat, 10 Jul 2021 16:46:20 +0000 (09:46 -0700)]
Merge tag 'arm-drivers-5.14' of git://git./linux/kernel/git/soc/soc
Pull ARM driver updates from Olof Johansson:
- Reset controllers: Adding support for Microchip Sparx5 Switch.
- Memory controllers: ARM Primecell PL35x SMC memory controller driver
cleanups and improvements.
- i.MX SoC drivers: Power domain support for i.MX8MM and i.MX8MN.
- Rockchip: RK3568 power domains support + DT binding updates,
cleanups.
- Qualcomm SoC drivers: Amend socinfo with more SoC/PMIC details,
including support for MSM8226, MDM9607, SM6125 and SC8180X.
- ARM FFA driver: "Firmware Framework for ARMv8-A", defining management
interfaces and communication (including bus model) between partitions
both in Normal and Secure Worlds.
- Tegra Memory controller changes, including major rework to deal with
identity mappings at boot and integration with ARM SMMU pieces.
* tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (120 commits)
firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string
firmware: turris-mox-rwtm: show message about HWRNG registration
firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng
firmware: turris-mox-rwtm: report failures better
firmware: turris-mox-rwtm: fix reply status decoding function
soc: imx: gpcv2: add support for i.MX8MN power domains
dt-bindings: add defines for i.MX8MN power domains
firmware: tegra: bpmp: Fix Tegra234-only builds
iommu/arm-smmu: Use Tegra implementation on Tegra186
iommu/arm-smmu: tegra: Implement SID override programming
iommu/arm-smmu: tegra: Detect number of instances at runtime
dt-bindings: arm-smmu: Add Tegra186 compatible string
firmware: qcom_scm: Add MDM9607 compatible
soc: qcom: rpmpd: Add MDM9607 RPM Power Domains
soc: renesas: Add support to read LSI DEVID register of RZ/G2{L,LC} SoC's
soc: renesas: Add ARCH_R9A07G044 for the new RZ/G2L SoC's
dt-bindings: soc: rockchip: drop unnecessary #phy-cells from grf.yaml
memory: emif: remove unused frequency and voltage notifiers
memory: fsl_ifc: fix leak of private memory on probe failure
memory: fsl_ifc: fix leak of IO mapping on probe failure
...
Linus Torvalds [Sat, 10 Jul 2021 16:33:54 +0000 (09:33 -0700)]
Merge tag 'arm-dt-5.14' of git://git./linux/kernel/git/soc/soc
Pull ARM devicetree updates from Olof Johansson:
"Like always, the DT branch is sizable. There are numerous additions
and fixes to existing platforms, but also a handful of new ones
introduced. Less than some other releases, but there's been
significant work on cleanups, refactorings and device enabling on
existing platforms.
A non-exhaustive list of new material:
- Refactoring of BCM2711 dtsi structure to add support for the
Raspberry Pi 400
- Rockchip: RK3568 SoC and EVB, video codecs for
rk3036/3066/3188/322x
- Qualcomm: SA8155p Automotive platform (SM8150 derivative),
SM8150/8250 enhancements and support for Sony Xperia 1/1II and
5/5II
- TI K3: PCI/USB3 support on AM64-sk boards, R5 remoteproc
definitions
- TI OMAP: Various cleanups
- Tegra: Audio support for Jetson Xavier NX, SMMU support on Tegra194
- Qualcomm: lots of additions for peripherals across several SoCs,
and new support for Microsoft Surface Duo (SM8150-based), Huawei
Ascend G7.
- i.MX: Numerous additions of features across SoCs and boards.
- Allwinner: More device bindings for V3s, Forlinx OKA40i-C and
NanoPi R1S H5 boards
- MediaTek: More device bindings for mt8167, new Chromebook system
variants for mt8183
- Renesas: RZ/G2L SoC and EVK added
- Amlogic: BananaPi BPI-M5 board added"
* tag 'arm-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (511 commits)
arm64: dts: rockchip: add basic dts for RK3568 EVB
arm64: dts: rockchip: add core dtsi for RK3568 SoC
arm64: dts: rockchip: add generic pinconfig settings used by most Rockchip socs
ARM: dts: rockchip: add vpu and vdec node for RK322x
ARM: dts: rockchip: add vpu nodes for RK3066 and RK3188
ARM: dts: rockchip: add vpu node for RK3036
arm64: dts: ipq8074: Add QUP6 I2C node
arm64: dts: rockchip: Re-add regulator-always-on for vcc_sdio for rk3399-roc-pc
arm64: dts: rockchip: Re-add regulator-boot-on, regulator-always-on for vdd_gpu on rk3399-roc-pc
arm64: dts: rockchip: add ir-receiver for rk3399-roc-pc
arm64: dts: rockchip: Add USB-C port details for rk3399 Firefly
arm64: dts: rockchip: Sort rk3399 firefly pinmux entries
arm64: dts: rockchip: add infrared receiver node to RK3399 Firefly
arm64: dts: rockchip: add SPDIF node for rk3399-firefly
arm64: dts: rockchip: Add Rotation Property for OGA Panel
arm64: dts: qcom: sc7180: bus votes for eMMC and SD card
arm64: dts: qcom: sm8250-edo: Add Samsung touchscreen
arm64: dts: qcom: sm8250-edo: Enable GPI DMA
arm64: dts: qcom: sm8250-edo: Enable ADSP/CDSP/SLPI
arm64: dts: qcom: sm8250-edo: Enable PCIe
...
Linus Torvalds [Sat, 10 Jul 2021 16:22:44 +0000 (09:22 -0700)]
Merge tag 'arm-soc-5.14' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC updates from Olof Johansson:
"A few SoC (code) changes have queued up this cycle, mostly for minor
changes and some refactoring and cleanup of legacy platforms. This
branch also contains a few of the fixes that weren't sent in by the
end of the release (all fairly minor).
- Adding an additional maintainer for the TEE subsystem (Sumit Garg)
- Quite a significant modernization of the IXP4xx platforms by Linus
Walleij, revisiting with a new PCI host driver/binding, removing
legacy mach/* include dependencies and moving platform
detection/config to drivers/soc. Also some updates/cleanup of
platform data.
- Core power domain support for Tegra platforms, and some
improvements in build test coverage by adding stubs for compile
test targets.
- A handful of updates to i.MX platforms, adding legacy (non-PSCI)
SMP support on i.MX7D, SoC ID setup for i.MX50, removal of platform
data and board fixups for iMX6/7.
... and a few smaller changes and fixes for Samsung, OMAP, Allwinner,
Rockchip"
* tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (53 commits)
MAINTAINERS: Add myself as TEE subsystem reviewer
ixp4xx: fix spelling mistake in Kconfig "Devce" -> "Device"
hw_random: ixp4xx: Add OF support
hw_random: ixp4xx: Add DT bindings
hw_random: ixp4xx: Turn into a module
hw_random: ixp4xx: Use SPDX license tag
hw_random: ixp4xx: enable compile-testing
pata: ixp4xx: split platform data to its own header
soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h
PCI: ixp4xx: Add a new driver for IXP4xx
PCI: ixp4xx: Add device tree bindings for IXP4xx
ARM/ixp4xx: Make NEED_MACH_IO_H optional
ARM/ixp4xx: Move the virtual IObases
MAINTAINERS: ARM/MStar/Sigmastar SoCs: Add a link to the MStar tree
ARM: debug: add UART early console support for MSTAR SoCs
ARM: dts: ux500: Fix LED probing
ARM: imx: add smp support for imx7d
ARM: imx6q: drop of_platform_default_populate() from init_machine
arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory
soc/tegra: fuse: Fix Tegra234-only builds
...
Linus Torvalds [Sat, 10 Jul 2021 16:17:13 +0000 (09:17 -0700)]
Merge tag 'fixes-2021-07-09' of git://git./linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"This is a fix for the rework of ARM's pfn_valid() implementation
merged during this merge window.
Don't abuse pfn_valid() to check if pfn is in RAM
The semantics of pfn_valid() is to check presence of the memory map
for a PFN and not whether a PFN is in RAM. The memory map may be
present for a hole in the physical memory and if such hole corresponds
to an MMIO range, __arm_ioremap_pfn_caller() will produce a WARN() and
fail.
Use memblock_is_map_memory() instead of pfn_valid() to check if a PFN
is in RAM or not"
* tag 'fixes-2021-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
arm: ioremap: don't abuse pfn_valid() to check if pfn is in RAM
Linus Torvalds [Sat, 10 Jul 2021 16:06:41 +0000 (09:06 -0700)]
Merge branch 'for-5.14-fixes' of git://git./linux/kernel/git/dennis/percpu
Pull percpu fix from Dennis Zhou:
"This is just a single change to fix percpu depopulation. The code
relied on depopulation code written specifically for the free path and
relied on vmalloc to do the tlb flush lazily. As we're modifying the
backing pages during the lifetime of a chunk, we need to also flush
the tlb accordingly.
Guenter Roeck reported this issue in [1] on mips. I believe we just
happen to be lucky given the much larger chunk sizes on x86 and
consequently less churning of this memory"
Link: https://lore.kernel.org/lkml/20210702191140.GA3166599@roeck-us.net/
* 'for-5.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
percpu: flush tlb in pcpu_reclaim_populated()
Mian Yousaf Kaukab [Tue, 29 Jun 2021 15:06:43 +0000 (17:06 +0200)]
rtc: pcf2127: handle timestamp interrupts
commit
03623b4b041c ("rtc: pcf2127: add tamper detection support")
added support for timestamp interrupts. However they are not being
handled in the irq handler. If a timestamp interrupt occurs it
results in kernel disabling the interrupt and displaying the call
trace:
[ 121.145580] irq 78: nobody cared (try booting with the "irqpoll" option)
...
[ 121.238087] [<
00000000c4d69393>] irq_default_primary_handler threaded [<
000000000a90d25b>] pcf2127_rtc_irq [rtc_pcf2127]
[ 121.248971] Disabling IRQ #78
Handle timestamp interrupts in pcf2127_rtc_irq(). Save time stamp
before clearing TSF1 and TSF2 flags so that it can't be overwritten.
Set a flag to mark if the timestamp is valid and only report to sysfs
if the flag is set. To mimic the hardware behavior, don’t save
another timestamp until the first one has been read by the userspace.
However, if the alarm irq is not configured, keep the old way of
handling timestamp interrupt in the timestamp0 sysfs calls.
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Tested-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210629150643.31551-1-ykaukab@suse.de
Nobuhiro Iwamatsu [Thu, 8 Jul 2021 05:13:40 +0000 (14:13 +0900)]
rtc: at91sam9: Remove unnecessary offset variable checks
The offset variable is checked by at91_rtc_readalarm(), but this check
is unnecessary because the previous check knew that the value of this
variable was not 0.
This removes that unnecessary offset variable checks.
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210708051340.341345-1-nobuhiro1.iwamatsu@toshiba.co.jp
Nobuhiro Iwamatsu [Thu, 8 Jul 2021 05:13:04 +0000 (14:13 +0900)]
rtc: s5m: Check return value of s5m_check_peding_alarm_interrupt()
s5m_check_peding_alarm_interrupt() in s5m_rtc_read_alarm() gets the return
value, but doesn't use it.
This modifies using the s5m_check_peding_alarm_interrupt()"s return value
as the s5m_rtc_read_alarm()'s return value.
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210708051304.341278-1-nobuhiro1.iwamatsu@toshiba.co.jp
Nobuhiro Iwamatsu [Wed, 7 Jul 2021 07:58:04 +0000 (16:58 +0900)]
rtc: spear: convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707075804.337458-11-nobuhiro1.iwamatsu@toshiba.co.jp
Nobuhiro Iwamatsu [Wed, 7 Jul 2021 07:58:02 +0000 (16:58 +0900)]
rtc: tps6586x: convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707075804.337458-9-nobuhiro1.iwamatsu@toshiba.co.jp
Nobuhiro Iwamatsu [Wed, 7 Jul 2021 07:58:01 +0000 (16:58 +0900)]
rtc: tps80031: convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707075804.337458-8-nobuhiro1.iwamatsu@toshiba.co.jp
Nobuhiro Iwamatsu [Wed, 7 Jul 2021 07:58:00 +0000 (16:58 +0900)]
rtc: rtd119x: Fix format of SPDX identifier
For C files, use the C99 format (//).
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707075804.337458-7-nobuhiro1.iwamatsu@toshiba.co.jp
Nobuhiro Iwamatsu [Wed, 7 Jul 2021 07:57:59 +0000 (16:57 +0900)]
rtc: sc27xx: Fix format of SPDX identifier
For C files, use the C99 format (//).
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707075804.337458-6-nobuhiro1.iwamatsu@toshiba.co.jp
Nobuhiro Iwamatsu [Wed, 7 Jul 2021 07:57:58 +0000 (16:57 +0900)]
rtc: palmas: convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707075804.337458-5-nobuhiro1.iwamatsu@toshiba.co.jp
Nobuhiro Iwamatsu [Wed, 7 Jul 2021 07:57:57 +0000 (16:57 +0900)]
rtc: max6900: convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707075804.337458-4-nobuhiro1.iwamatsu@toshiba.co.jp
Nobuhiro Iwamatsu [Wed, 7 Jul 2021 07:57:56 +0000 (16:57 +0900)]
rtc: ds1374: convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707075804.337458-3-nobuhiro1.iwamatsu@toshiba.co.jp
Nobuhiro Iwamatsu [Wed, 7 Jul 2021 07:57:55 +0000 (16:57 +0900)]
rtc: au1xxx: convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707075804.337458-2-nobuhiro1.iwamatsu@toshiba.co.jp
projects / platform / kernel / linux-starfive.git / log