platform/kernel/linux-rpi.git
3 years agodrm/amdgpu/swsmu: handle VCN harvesting for VCN SMU setup
Alex Deucher [Thu, 21 Oct 2021 13:52:30 +0000 (09:52 -0400)]
drm/amdgpu/swsmu: handle VCN harvesting for VCN SMU setup

Check if VCN instances are harvested when controlling
VCN power gating and setting up VCN clocks.

Fixes: 1b592d00b4ac83 ("drm/amdgpu/vcn: remove manual instance setting")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1743
Reviewed-and-tested-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu: Workaround harvesting info for some navy flounder boards
Alex Deucher [Thu, 21 Oct 2021 13:50:00 +0000 (09:50 -0400)]
drm/amdgpu: Workaround harvesting info for some navy flounder boards

Some navy flounder boards do not properly mark harvested
VCN instances.  Fix that here.

v2: use IP versions

Fixes: 1b592d00b4ac83 ("drm/amdgpu/vcn: remove manual instance setting")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1743
Reviewed-and-tested-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu/vcn3.0: remove intermediate variable
Alex Deucher [Tue, 19 Oct 2021 16:51:33 +0000 (12:51 -0400)]
drm/amdgpu/vcn3.0: remove intermediate variable

No need to use the id variable, just use the constant
plus instance offset directly.

Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu/vcn2.0: remove intermediate variable
Alex Deucher [Tue, 19 Oct 2021 16:48:22 +0000 (12:48 -0400)]
drm/amdgpu/vcn2.0: remove intermediate variable

No need to use the tmp variable, just use the constant
directly.

Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu: Consolidate VCN firmware setup code
Alex Deucher [Tue, 19 Oct 2021 17:20:37 +0000 (13:20 -0400)]
drm/amdgpu: Consolidate VCN firmware setup code

Roughly the same code was present in all VCN versions.
Consolidate it into a single function.

v2: use AMDGPU_UCODE_ID_VCN + i, check if num_inst >= 2

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
3 years agodrm/amdgpu/vcn3.0: handle harvesting in firmware setup
Alex Deucher [Tue, 19 Oct 2021 15:08:05 +0000 (11:08 -0400)]
drm/amdgpu/vcn3.0: handle harvesting in firmware setup

Only enable firmware for the instance that is enabled.

v2: use AMDGPU_UCODE_ID_VCN + i

Fixes: 1b592d00b4ac83 ("drm/amdgpu/vcn: remove manual instance setting")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1743
Reviewed-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdkfd: debug message to count successfully migrated pages
Philip Yang [Wed, 20 Oct 2021 21:26:49 +0000 (17:26 -0400)]
drm/amdkfd: debug message to count successfully migrated pages

Not all migrate.cpages returned from migrate_vma_setup can be migrated,
for example non anonymous page, or out of device memory. So after
migrate_vma_pages returns, add debug message to count pages are
successfully migrated which has MIGRATE_PFN_VALID and
MIGRATE_PFN_MIGRATE flag set.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdkfd: clarify the origin of cpages returned by migration functions
Philip Yang [Fri, 15 Oct 2021 19:57:52 +0000 (15:57 -0400)]
drm/amdkfd: clarify the origin of cpages returned by migration functions

cpages is only updated by migrate_vma_setup. So capture its value at
that point to clarify the significance of the number. The next patch
will add counting of actually migrated pages after migrate_vma_pages for
debug purposes.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/amdgpu: add dummy_page_addr to sriov msg
Jingwen Chen [Thu, 21 Oct 2021 08:46:14 +0000 (16:46 +0800)]
drm/amd/amdgpu: add dummy_page_addr to sriov msg

Add dummy_page_addr to sriov msg for host driver to set
GCVM_L2_PROTECTION_DEFAULT_ADDR* registers correctly.

v2:
should update vf2pf msg instead

Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Horace Chen <horace.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu: remove grbm cam index/data operations for gfx v10
Huang Rui [Tue, 19 Oct 2021 06:26:39 +0000 (14:26 +0800)]
drm/amdgpu: remove grbm cam index/data operations for gfx v10

PSP firmware will be responsible for applying the GRBM CAM remapping in
the production. And the GRBM_CAM_INDEX / GRBM_CAM_DATA registers will be
protected by PSP under security policy. So remove it according to the
new security policy.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/pm: Enable GPU metrics for One VF mode
Vignesh Chander [Wed, 13 Oct 2021 02:07:17 +0000 (22:07 -0400)]
drm/amd/pm: Enable GPU metrics for One VF mode

Enable GPU metrics feature in one VF mode.
These are only possible in one VF mode because the VF is dedicated in that case.

Signed-off-by: Vignesh Chander <Vignesh.Chander@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu: Clarify error when hitting bad page threshold
Kent Russell [Tue, 19 Oct 2021 13:53:17 +0000 (09:53 -0400)]
drm/amdgpu: Clarify error when hitting bad page threshold

Change the error message when the bad_page_threshold is reached,
explicitly stating that the GPU will not be initialized.

Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Mukul Joshi <Mukul.Joshi@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu: drop navi reg init functions
Alex Deucher [Mon, 11 Oct 2021 13:55:54 +0000 (09:55 -0400)]
drm/amdgpu: drop navi reg init functions

No longer used since IP enumeration is driven by the IP
discovery table now.

Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu: drop nv_set_ip_blocks()
Alex Deucher [Mon, 11 Oct 2021 13:46:18 +0000 (09:46 -0400)]
drm/amdgpu: drop nv_set_ip_blocks()

No longer used since IP enumeration is now driven by
amdgpu IP discovery code.

Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu: drop soc15_set_ip_blocks()
Alex Deucher [Mon, 11 Oct 2021 13:44:47 +0000 (09:44 -0400)]
drm/amdgpu: drop soc15_set_ip_blocks()

No longer used since IP enumeration is now driven by
amdgpu IP discovery code.

Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdkfd: protect raven_device_info with KFD_SUPPORT_IOMMU_V2
Alex Deucher [Mon, 11 Oct 2021 13:39:37 +0000 (09:39 -0400)]
drm/amdkfd: protect raven_device_info with KFD_SUPPORT_IOMMU_V2

raven_device_info is not used when KFD_SUPPORT_IOMMU_V2 is not
set.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdkfd: protect hawaii_device_info with CONFIG_DRM_AMDGPU_CIK
Alex Deucher [Mon, 11 Oct 2021 13:36:33 +0000 (09:36 -0400)]
drm/amdkfd: protect hawaii_device_info with CONFIG_DRM_AMDGPU_CIK

hawaii_device_info is not used when CONFIG_DRM_AMDGPU_CIK is not
set.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu/gfx10: fix typo in gfx_v10_0_update_gfx_clock_gating()
Alex Deucher [Tue, 12 Oct 2021 16:22:59 +0000 (12:22 -0400)]
drm/amdgpu/gfx10: fix typo in gfx_v10_0_update_gfx_clock_gating()

Check was incorrectly converted to IP version checking.

Fixes: 4b0ad8425498ba ("drm/amdgpu/gfx10: convert to IP version checking")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu/pm: properly handle sclk for profiling modes on vangogh
Alex Deucher [Mon, 4 Oct 2021 15:33:00 +0000 (11:33 -0400)]
drm/amdgpu/pm: properly handle sclk for profiling modes on vangogh

When selecting between levels in the force performance levels interface
sclk (gfxclk) was not set correctly for all levels.  Select the proper
sclk settings for all levels.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1726
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu: replace snprintf in show functions with sysfs_emit
Qing Wang [Fri, 15 Oct 2021 06:47:20 +0000 (23:47 -0700)]
drm/amdgpu: replace snprintf in show functions with sysfs_emit

show() must not use snprintf() when formatting the value to be
returned to user space.

Fix the following coccicheck warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c:427:
WARNING: use scnprintf or sprintf.

Signed-off-by: Qing Wang <wangqing@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu: support B0&B1 external revision id for yellow carp
Aaron Liu [Tue, 19 Oct 2021 03:13:25 +0000 (11:13 +0800)]
drm/amdgpu: support B0&B1 external revision id for yellow carp

B0 internal rev_id is 0x01, B1 internal rev_id is 0x02.
The external rev_id for B0 and B1 is 0x20.
The original expression is not suitable for B1.

v2: squash in fix for display code (Alex)

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu/discovery: parse hw_id_name for SDMA instance 2 and 3
Guchun Chen [Mon, 18 Oct 2021 14:26:01 +0000 (22:26 +0800)]
drm/amdgpu/discovery: parse hw_id_name for SDMA instance 2 and 3

Otherwise, hw_id_name string is NULL for SDMA 2 and 3 when dumping
ip version from VBIOS.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu: output warning for unsupported ras error inject (v2)
Tao Zhou [Mon, 18 Oct 2021 09:02:16 +0000 (17:02 +0800)]
drm/amdgpu: output warning for unsupported ras error inject (v2)

Output a warning message if RAS TA returns UNSUPPORTED_ERROR_INJ status.

v2: implement it in psp_ras_ta_check_status function.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu: centralize checking for RAS TA status
Tao Zhou [Fri, 15 Oct 2021 08:57:43 +0000 (16:57 +0800)]
drm/amdgpu: centralize checking for RAS TA status

Create new function to check status returned by RAS TA.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agoRevert "drm/amd/display: Add helper for blanking all dp displays"
Agustin Gutierrez [Fri, 15 Oct 2021 18:05:19 +0000 (14:05 -0400)]
Revert "drm/amd/display: Add helper for blanking all dp displays"

This reverts commit 1445d967fb915156aed0e79ca80c239cb2d414ce.

This patch introduced a couple of dmesg warnings, this is not a valid
approach anymore. For this reason, we are reverting this patch, and we
need to revert the workaround patch.

v2: squash in unused variable removal (Alex)

Cc: Hanghong Ma <hanghong.ma@amd.com>
Cc: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agoRevert "drm/amd/display: Fix error in dmesg at boot"
Agustin Gutierrez [Fri, 15 Oct 2021 17:42:15 +0000 (13:42 -0400)]
Revert "drm/amd/display: Fix error in dmesg at boot"

This reverts commit 4874ecf5fd1de008756a76796bf255d3b19715c1.

Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: [FW Promotion] Release 0.0.88
Anthony Koo [Sun, 3 Oct 2021 01:06:38 +0000 (21:06 -0400)]
drm/amd/display: [FW Promotion] Release 0.0.88

Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: Add bios parser support for latest firmware_info
Nevenko Stupar [Wed, 29 Sep 2021 22:00:28 +0000 (18:00 -0400)]
drm/amd/display: Add bios parser support for latest firmware_info

[Why]
V3_4 is latest in use.

[How]
Add bios parser support for firmware_info_v3_4 along
with some relevant fields it is also retrieving from dce_info
and smu_info.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: 3.2.157
Aric Cyr [Mon, 4 Oct 2021 03:42:48 +0000 (23:42 -0400)]
drm/amd/display: 3.2.157

This DC patchset brings improvements in multiple areas. In summary, we
highlight:

* Fix some issues such as DP2 problem, prefetch bandwidth calculation
for DCN3.1 and others.
* Increased Z9 latency and removed z10 save after dsc disable.
* Revert a couple of bad changes.
* Added missing PSR state patch.

Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: Change initializer to single brace
Anthony Koo [Sun, 3 Oct 2021 01:06:38 +0000 (21:06 -0400)]
drm/amd/display: Change initializer to single brace

Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: Disable hdmistream and hdmichar clocks
Jake Wang [Thu, 23 Sep 2021 03:37:52 +0000 (23:37 -0400)]
drm/amd/display: Disable hdmistream and hdmichar clocks

[Why & How]
Disable hdmistream and hdmichar root clocks when not being used.

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: Moved dccg init to after bios golden init
Jake Wang [Fri, 1 Oct 2021 21:14:21 +0000 (17:14 -0400)]
drm/amd/display: Moved dccg init to after bios golden init

[Why]
bios_golden_init will override dccg_init during init_hw.

[How]
Move dccg_init to after bios_golden_init.

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: Removed z10 save after dsc disable
Jake Wang [Fri, 1 Oct 2021 20:46:49 +0000 (16:46 -0400)]
drm/amd/display: Removed z10 save after dsc disable

[Why & How]
Z10 save is done during PSR and bootup.
DSC disable does not need to save for Z10.

Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: Disable dpstreamclk, symclk32_se, and symclk32_le
Jake Wang [Thu, 23 Sep 2021 04:52:43 +0000 (00:52 -0400)]
drm/amd/display: Disable dpstreamclk, symclk32_se, and symclk32_le

[Why & How]
Disable dpstreamclk, symclk32_se, and symclk32_le when not in use.

Reviewed-by: Ariel Bernstein <eric.yang2@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: Increase watermark latencies for DCN3.1
Nikola Cornij [Fri, 1 Oct 2021 17:26:05 +0000 (13:26 -0400)]
drm/amd/display: Increase watermark latencies for DCN3.1

[why]
The original latencies were causing underflow in some modes

[how]
Replace with the up-to-date watermark values based on new measurments

Reviewed-by: Ahmad Othman <ahmad.othman@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: increase Z9 latency to workaround underflow in Z9
Eric Yang [Thu, 30 Sep 2021 17:46:45 +0000 (13:46 -0400)]
drm/amd/display: increase Z9 latency to workaround underflow in Z9

[Why]
Z9 latency is higher than when we originally tuned the watermark
parameters, causing underflow. Increasing the value until the latency
issues is resolved.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: Require immediate flip support for DCN3.1 planes
Nicholas Kazlauskas [Wed, 29 Sep 2021 20:22:53 +0000 (16:22 -0400)]
drm/amd/display: Require immediate flip support for DCN3.1 planes

[Why]
Immediate flip can be enabled dynamically and has higher BW requirements
when validating which voltage mode to use.

If we validate when it's not set then potentially DCFCLK will be too low
and we will underflow.

[How]
DM always requires support so always require it as part of DML input
parameters.

This can't be enabled unconditionally on older ASIC because it blocks
some expected modes so only target DCN3.1 for now.

Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: Disable dsc root clock when not being used
Jake Wang [Wed, 22 Sep 2021 20:25:36 +0000 (16:25 -0400)]
drm/amd/display: Disable dsc root clock when not being used

[Why & How]
Disable root clock for dsc when not being used.

Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: Add missing PSR state
Mikita Lipski [Wed, 29 Sep 2021 12:39:21 +0000 (08:39 -0400)]
drm/amd/display: Add missing PSR state

[why]
PSR_STATE2b was introduced on DMCUB side, but not on the driver side,
which caused convert_psr_state helper function to return
PSR_STATE_INVALID. That caused visual lagging during state transition.

[how]
Add PSR_STATE2b to dc_psr_state and convert_psr_state

Reviewed-by: Wyatt Wood <Wyatt.Wood@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: Fix prefetch bandwidth calculation for DCN3.1
Nicholas Kazlauskas [Wed, 29 Sep 2021 15:37:33 +0000 (11:37 -0400)]
drm/amd/display: Fix prefetch bandwidth calculation for DCN3.1

[Why]
Prefetch BW calculated is lower than the DML reference because of a
porting error that's excluding cursor and row bandwidth from the
pixel data bandwidth.

[How]
Change the dml_max4 to dml_max3 and include cursor and row bandwidth
in the same calculation as the rest of the pixel data during vactive.

Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: Fix DP2 SE and LE SYMCLK selection for B0 PHY
Hansen [Tue, 28 Sep 2021 20:09:47 +0000 (16:09 -0400)]
drm/amd/display: Fix DP2 SE and LE SYMCLK selection for B0 PHY

Remap phyd32clk to PHYF and PHYG for B0, PHYC and PHYD are unused

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Hansen <Hansen.Dsouza@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: Limit display scaling to up to true 4k for DCN 3.1
Nikola Cornij [Wed, 29 Sep 2021 02:43:52 +0000 (22:43 -0400)]
drm/amd/display: Limit display scaling to up to true 4k for DCN 3.1

[why]
The requirement is that image width up to 4096 shall be supported

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: Removed power down on boot from DCN31
Lai, Derek [Tue, 28 Sep 2021 05:58:56 +0000 (13:58 +0800)]
drm/amd/display: Removed power down on boot from DCN31

[Why]
Error message on Linux when booting.

[How]
Removed power down on boot from DCN31 HW init
to match DCN10 HW init.

Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Derek Lai <derek.lai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: Validate plane rects before use
Aric Cyr [Tue, 28 Sep 2021 20:05:27 +0000 (16:05 -0400)]
drm/amd/display: Validate plane rects before use

[Why]
Calculation of scaling ratio can result in a crash due to zero'd src or
dst plane rects.

[How]
Validate that src and dst rects are valid before using for scaling
calculations.

Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: correct apg audio channel enable golden value
Wenjing Liu [Tue, 28 Sep 2021 17:09:14 +0000 (13:09 -0400)]
drm/amd/display: correct apg audio channel enable golden value

Hardware team has recommended to generically hard code this register to
0xFF as part of the effort to eventually remove this control.  However
we set it to 0xF instead.
This causes 4 of audio 8ch to be muted.

Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: do not compare integers of different widths
Josip Pavic [Mon, 27 Sep 2021 21:38:10 +0000 (17:38 -0400)]
drm/amd/display: do not compare integers of different widths

[Why & How]
Increase width of some variables to avoid comparing integers of
different widths

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: Clean Up VPG Low Mem Power
Michael Strauss [Tue, 21 Sep 2021 17:35:19 +0000 (13:35 -0400)]
drm/amd/display: Clean Up VPG Low Mem Power

[WHAT]
One of the current VPG power on calls is unnecessary

Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: add DP2.0 debug option to set MST_EN for SST stream
Wenjing Liu [Fri, 24 Sep 2021 20:12:34 +0000 (16:12 -0400)]
drm/amd/display: add DP2.0 debug option to set MST_EN for SST stream

[why]
Some DP2.0 RX requires us to set MST_EN even for SST configuration.
We added this debug option so we can configure this temporary workaround
for the RX.

Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: Do not skip link training on DP quick hot plug
Jimmy Kizito [Wed, 22 Sep 2021 13:50:38 +0000 (09:50 -0400)]
drm/amd/display: Do not skip link training on DP quick hot plug

[Why]
When rapidly plugging and unplugging a DP sink, detection link
training can be mistakenly skipped.

This is due to the hotplug processing occurring before the
encoder assignment logic has had a chance to process the removal
of a stream. The encoder that would be used for detection link
training is then erroneously reported as already in use and
detection link training is skipped.

[How]
During hot plug processing, only determine a link encoder to be
unavailable for a particular link if it has been assigned to a
different link.

Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: Clear encoder assignment for copied streams
Jimmy Kizito [Tue, 21 Sep 2021 14:03:05 +0000 (10:03 -0400)]
drm/amd/display: Clear encoder assignment for copied streams

[Why]
When copying a stream, the encoder assigned to it is copied too.
Encoder assignment should only happen when executing the encoder
assignment function link_encs_assign().

[How]
Clear the link encoder pointer for copied stream.

Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: Disable dpp root clock when not being used
Jake Wang [Wed, 22 Sep 2021 18:22:59 +0000 (14:22 -0400)]
drm/amd/display: Disable dpp root clock when not being used

[Why & How]
Disable root clock for dpp when not being used.

Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: Fully switch to dmub for all dcn21 asics
Roman Li [Fri, 15 Oct 2021 17:16:31 +0000 (13:16 -0400)]
drm/amd/display: Fully switch to dmub for all dcn21 asics

[Why]
On renoir usb-c port stops functioning on resume after f/w update.
New dmub firmware caused regression due to conflict with dmcu.
With new dmub f/w dmcu is superseded and should be disabled.

[How]
- Disable dmcu for all dcn21.

Check dmesg for dmub f/w version.
The old firmware (before regression):
[drm] DMUB hardware initialized: version=0x00000001
All other versions require this patch for renoir.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1735
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/amdgpu: Do irq_fini_hw after ip_fini_early
YuBiao Wang [Tue, 19 Oct 2021 21:16:23 +0000 (17:16 -0400)]
drm/amd/amdgpu: Do irq_fini_hw after ip_fini_early

[Why]
drm_irq_uninstall is called in irq_fini_hw so that irq is disabled in sw
stage. SMU (and maybe other IP blocks) fini_hw will call irq_put for
cleanup and the whole cleanup process will be skipped because of
drm->irq_enable = false.

[How]
Move ip_fini_early before irq_fini_hw.

Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdkfd: map gpu hive id to xgmi connected cpu
Jonathan Kim [Thu, 14 Oct 2021 16:34:27 +0000 (12:34 -0400)]
drm/amdkfd: map gpu hive id to xgmi connected cpu

ROCr needs to be able to identify all devices that have direct access to
fine grain memory, which should include CPUs that are connected to GPUs
over xGMI. The GPU hive ID can be mapped onto the CPU hive ID since the
CPU is part of the hive.

Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu: load PSP RL in resume path
Tao Zhou [Fri, 15 Oct 2021 06:29:38 +0000 (14:29 +0800)]
drm/amdgpu: load PSP RL in resume path

Some registers' access will fail without PSP RL after resume.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdkfd: Fix an inappropriate error handling in allloc memory of gpu
Lang Yu [Mon, 11 Oct 2021 05:57:25 +0000 (13:57 +0800)]
drm/amdkfd: Fix an inappropriate error handling in allloc memory of gpu

We should unreference a gem object instead of an amdgpu bo here.

Fixes: fd9a9f8801de ("drm/amdgpu: Use GEM obj reference for KFD BOs")
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu/psp: add some missing cases to psp_check_pmfw_centralized_cstate_management
Alex Deucher [Tue, 12 Oct 2021 15:47:56 +0000 (11:47 -0400)]
drm/amdgpu/psp: add some missing cases to psp_check_pmfw_centralized_cstate_management

Missed a few asics.

v2: update comment

Fixes: 82d05736c47b19 ("drm/amdgpu/amdgpu_psp: convert to IP version checking")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu/swsmu: fix is_support_sw_smu() for VEGA20
Alex Deucher [Tue, 12 Oct 2021 15:32:49 +0000 (11:32 -0400)]
drm/amdgpu/swsmu: fix is_support_sw_smu() for VEGA20

VEGA20 is 11.0.2, but it's handled by powerplay, not
swsmu.

Fixes: a8967967f6a554 ("drm/amdgpu/amdgpu_smu: convert to IP version checking")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdkfd: unregistered svm range not overlap with TTM range
Philip Yang [Tue, 12 Oct 2021 03:12:25 +0000 (23:12 -0400)]
drm/amdkfd: unregistered svm range not overlap with TTM range

When creating unregistered new svm range to recover retry fault, avoid
new svm range to overlap with ranges or userptr ranges managed by TTM,
otherwise svm migration will trigger TTM or userptr eviction, to evict
user queues unexpectedly.

Change helper amdgpu_ttm_tt_affect_userptr to return userptr which is
inside the range. Add helper svm_range_check_vm_userptr to scan all
userptr of the vm, and return overlap userptr bo start, last.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu: fix out of bounds write
Thelford Williams [Wed, 13 Oct 2021 20:04:13 +0000 (16:04 -0400)]
drm/amdgpu: fix out of bounds write

Size can be any value and is user controlled resulting in overwriting the
40 byte array wr_buf with an arbitrary length of data from buf.

Signed-off-by: Thelford Williams <tdwilliamsiv@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu/smu11: fix firmware version check for vangogh
Alex Deucher [Tue, 12 Oct 2021 15:21:24 +0000 (11:21 -0400)]
drm/amdgpu/smu11: fix firmware version check for vangogh

Was missed in the conversion to IP version checking.

Fixes: af3b89d3a639d5 ("drm/amdgpu/smu11.0: convert to IP version checking")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agoMAINTAINERS: Add Siqueira for AMD DC
Harry Wentland [Fri, 8 Oct 2021 21:21:22 +0000 (17:21 -0400)]
MAINTAINERS: Add Siqueira for AMD DC

He's been helping maintain it for quite a while now. Make
it official.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdkfd: fix resume error when iommu disabled in Picasso
Yifan Zhang [Mon, 11 Oct 2021 12:42:31 +0000 (20:42 +0800)]
drm/amdkfd: fix resume error when iommu disabled in Picasso

When IOMMU disabled in sbios and kfd in iommuv2 path,
IOMMU resume failure blocks system resume. Don't allow kfd to
use iommu v2 when iommu is disabled.

Reported-by: youling <youling257@gmail.com>
Tested-by: youling <youling257@gmail.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdkfd: fix boot failure when iommu is disabled in Picasso.
Yifan Zhang [Mon, 11 Oct 2021 12:37:01 +0000 (20:37 +0800)]
drm/amdkfd: fix boot failure when iommu is disabled in Picasso.

When IOMMU disabled in sbios and kfd in iommuv2 path, iommuv2
init will fail. But this failure should not block amdgpu driver init.

Reported-by: youling <youling257@gmail.com>
Tested-by: youling <youling257@gmail.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdkfd: handle svm partial migration cpages 0
Philip Yang [Tue, 5 Oct 2021 15:13:21 +0000 (11:13 -0400)]
drm/amdkfd: handle svm partial migration cpages 0

migrate_vma_setup may return cpages 0, means 0 page can be migrated,
treat this as error case to skip the rest of vma migration steps.

Change svm_migrate_vma_to_vram and svm_migrate_vma_to_ram to return the
number of pages migrated successfully or error code. The caller add up
all the successful migration pages and update prange->actual_loc only if
the total migrated pages is not 0.

This also removes the warning message "VRAM BO missing during
validation" if migration cpages is 0.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdkfd: ratelimited svm debug messages
Philip Yang [Tue, 5 Oct 2021 15:12:18 +0000 (11:12 -0400)]
drm/amdkfd: ratelimited svm debug messages

No function change, use pr_debug_ratelimited to avoid per page debug
message overflowing dmesg buf and console log.

use dev_err to show error message from unexpected situation, to provide
clue to help debug without enabling dynamic debug log. Define dev_fmt to
output function name in error message.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/pm: Fix incorrect power limit readback in smu11 if POWER_SOURCE_DC
Darren Powell [Sat, 21 Aug 2021 02:08:07 +0000 (22:08 -0400)]
drm/amd/pm: Fix incorrect power limit readback in smu11 if POWER_SOURCE_DC

 when smu->adev->pm.ac_power == 0, message parameter with bit 16 set is saved
 to smu->current_power_limit.

Fixes: 0cb4c62125a9 ("drm/amd/pm: correct power limit setting for SMU V11)"
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agoamdgpu/pm: (v2) add limit_type to (pptable_funcs)->set_power_limit signature
Darren Powell [Thu, 19 Aug 2021 03:31:36 +0000 (23:31 -0400)]
amdgpu/pm: (v2) add limit_type to (pptable_funcs)->set_power_limit signature

 v2
 add check for SMU_DEFAULT_PPT_LIMIT

 v1
 modify (pptable_funcs)->set_power_limit signature
 modify smu11 set_power_limit signature (arcturus, navi10, sienna_cichlid)
 modify smu13 set_power_limit signature (aldabaran)
 modify vangogh_set_power_limit signature (vangogh)

=== Test ===
sudo bash

AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1`
AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | awk '{print $9}'`
HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON}
LOGFILE=pp_show_power_cap.log

cp $LOGFILE{,.old}
lspci -nn | grep "VGA\|Display" > $LOGFILE
FILES="
power1_cap
power2_cap"

for f in $FILES
do
  if test -f "$HWMON_DIR/$f"; then
    echo === $f === >> $LOGFILE
    cat $HWMON_DIR/$f >> $LOGFILE
    RESTORE_VALUE=`cat $HWMON_DIR/$f` 2>&1  >> $LOGFILE
    echo RESTORE_VALUE $RESTORE_VALUE >> $LOGFILE
    echo 120000000 > $HWMON_DIR/$f
    sleep 3
    cat $HWMON_DIR/$f >> $LOGFILE
    echo $RESTORE_VALUE > $HWMON_DIR/$f
    sleep 3
    cat $HWMON_DIR/$f >> $LOGFILE
  else
    echo === $f === >> $LOGFILE
    echo File Not Found >> $LOGFILE
  fi
done
cat $LOGFILE

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu: Fix RAS page retirement with mode2 reset on Aldebaran
Mukul Joshi [Tue, 21 Sep 2021 00:48:23 +0000 (20:48 -0400)]
drm/amdgpu: Fix RAS page retirement with mode2 reset on Aldebaran

During mode2 reset, the GPU is temporarily removed from the
mgpu_info list. As a result, page retirement fails because it
cannot find the GPU in the GPU list.
To fix this, create our own list of GPUs that support MCE notifier
based page retirement and use that list to check if the UMC error
occurred on a GPU that supports MCE notifier based page retirement.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu: Enable RAS error injection after mode2 reset on Aldebaran
Mukul Joshi [Mon, 20 Sep 2021 19:29:23 +0000 (15:29 -0400)]
drm/amdgpu: Enable RAS error injection after mode2 reset on Aldebaran

Add the missing call to re-enable RAS error injections on the Aldebaran
mode2 reset code path.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: fix null pointer deref when plugging in display
Aurabindo Pillai [Fri, 8 Oct 2021 20:07:45 +0000 (16:07 -0400)]
drm/amd/display: fix null pointer deref when plugging in display

[Why&How]
When system boots in headless mode, connecting a 4k display creates a
null pointer dereference due to hubp for a certain plane being null.
Add a condition to check for null hubp before dereferencing it.

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: Fix surface optimization regression on Carrizo
Nicholas Kazlauskas [Tue, 12 Oct 2021 14:04:03 +0000 (10:04 -0400)]
drm/amd/display: Fix surface optimization regression on Carrizo

[Why]
DCE legacy optimization path isn't well tested under new DC optimization
flow which can result in underflow occuring when initializing X11 on
Carrizo.

[How]
Retain the legacy optimization flow for DCE and keep the new one for DCN
to satisfy optimizations being correctly applied for ASIC that can
support it.

Fixes: 34316c1e561db0 ("drm/amd/display: Optimize bandwidth on following fast update")
Reported-by: Tom St Denis <tom.stdenis@amd.com>
Tested-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: Enable PSR by default on newer DCN
Nicholas Kazlauskas [Tue, 5 Oct 2021 14:55:57 +0000 (10:55 -0400)]
drm/amd/display: Enable PSR by default on newer DCN

[Why]
For optimal power savings on panels that can support it.

This was previously left disabled by default because of issues with
compositors that do not pageflip and scan out directly to the
frontbuffer.

For these compositors we now have detection methods that wait for x
number of pageflips after a full update - triggered by a buffer or
format change typically.

This may introduce bugs or new cases not tested by users so this is
only currently targeting newer DCN.

[How]
Add code in DM to set PSR state by default for newer DCN while falling
back to the feature mask for older.

Add a global debug flag that can be set to disable it for either.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu: enable display for cyan skillfish
Lang Yu [Tue, 12 Oct 2021 06:10:46 +0000 (14:10 +0800)]
drm/amdgpu: enable display for cyan skillfish

Display support for cyan skillfish is ready now. Enable it!

Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agoamd/display: check cursor plane matches underlying plane
Simon Ser [Wed, 6 Oct 2021 14:06:05 +0000 (14:06 +0000)]
amd/display: check cursor plane matches underlying plane

The current logic checks whether the cursor plane blending
properties match the primary plane's. However that's wrong,
because the cursor is painted on all planes underneath. If
the cursor is over the primary plane and the overlay plane,
it's painted on both pipes.

Iterate over the CRTC planes and check their scaling match
the cursor's.

v4: fix typo in commit message (Harry)

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agoamd/amdkfd: remove svms declaration to avoid werror
Alex Sierra [Thu, 30 Sep 2021 15:38:08 +0000 (10:38 -0500)]
amd/amdkfd: remove svms declaration to avoid werror

svm_range_list svms declaration removed to avoid werror when
CONFIG_HSA_AMD_SVM is not enabled.

Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdkfd: fix KFDSVMRangeTest.PartialUnmapSysMemTest fails
Yifan Zhang [Sat, 14 Aug 2021 09:53:14 +0000 (17:53 +0800)]
drm/amdkfd: fix KFDSVMRangeTest.PartialUnmapSysMemTest fails

[ RUN      ] KFDSVMRangeTest.PartialUnmapSysMemTest
/home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDTestUtil.cpp:245: Failure
Value of: (hsaKmtAllocMemory(m_Node, m_Size, m_Flags, &m_pBuf))
  Actual: 1
Expected: HSAKMT_STATUS_SUCCESS
Which is: 0
/home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDTestUtil.cpp:248: Failure
Value of: (hsaKmtMapMemoryToGPUNodes(m_pBuf, m_Size, __null, mapFlags, 1, &m_Node))
  Actual: 1
Expected: HSAKMT_STATUS_SUCCESS
Which is: 0
/home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDTestUtil.cpp:306: Failure
Expected: ((void *)__null) != (ptr), actual: NULL vs NULL
Segmentation fault (core dumped)
[          ] Profile: Full Test
[          ] HW capabilities: 0x9

kernel log:

[  102.029150]  ret_from_fork+0x22/0x30
[  102.029158] ---[ end trace 15c34e782714f9a3 ]---
[ 3613.603598] amdgpu: Address: 0x7f7149ccc000 already allocated by SVM
[ 3613.610620] show_signal_msg: 27 callbacks suppressed

These is race with deferred actions from previous memory map
changes (e.g. munmap).Flush pending deffered work to avoid such case.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdkfd: export svm_range_list_lock_and_flush_work
Yifan Zhang [Tue, 17 Aug 2021 08:47:26 +0000 (16:47 +0800)]
drm/amdkfd: export svm_range_list_lock_and_flush_work

export svm_range_list_lock_and_flush_work to make other kfd parts be
able to sync svm_range_list.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdkfd: avoid conflicting address mappings
Alex Sierra [Mon, 7 Jun 2021 18:14:50 +0000 (13:14 -0500)]
drm/amdkfd: avoid conflicting address mappings

[Why]
Avoid conflict with address ranges mapped by SVM
mechanism that try to be allocated again through
ioctl_alloc in the same process. And viceversa.

[How]
For ioctl_alloc_memory_of_gpu allocations
Check if the address range passed into ioctl memory
alloc does not exist already in the kfd_process
svms->objects interval tree.

For SVM allocations
Look for the address range into the interval tree VA from
the VM inside of each pdds used in a kfd_process.

Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu/nbio2.3: don't use GPU_HDP_FLUSH bit 12
Alex Deucher [Fri, 8 Oct 2021 14:23:38 +0000 (10:23 -0400)]
drm/amdgpu/nbio2.3: don't use GPU_HDP_FLUSH bit 12

It's used internally by firmware.  Using it in the driver
could conflict with firmware.

v2: squash in fix for navi1x (Alex)

Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu/nbio7.4: don't use GPU_HDP_FLUSH bit 12
Alex Deucher [Fri, 8 Oct 2021 14:21:42 +0000 (10:21 -0400)]
drm/amdgpu/nbio7.4: don't use GPU_HDP_FLUSH bit 12

It's used internally by firmware.  Using it in the driver
could conflict with firmware.

Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu: query default sclk from smu for cyan_skillfish
Lang Yu [Mon, 11 Oct 2021 08:27:04 +0000 (16:27 +0800)]
drm/amdgpu: query default sclk from smu for cyan_skillfish

Query default sclk instead of hard code.

Signed-off-by: Lang Yu <lang.yu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agoMerge tag 'drm-intel-gt-next-2021-10-08' of git://anongit.freedesktop.org/drm/drm...
Dave Airlie [Mon, 11 Oct 2021 08:09:39 +0000 (18:09 +1000)]
Merge tag 'drm-intel-gt-next-2021-10-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

UAPI Changes:

- Add uAPI for using PXP protected objects

  Mesa changes: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8064

- Add PCI IDs and LMEM discovery/placement uAPI for DG1

  Mesa changes: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11584

- Disable engine bonding on Gen12+ except TGL, RKL and ADL-S

Cross-subsystem Changes:

- Merges 'tip/locking/wwmutex' branch (core kernel tip)
- "mei: pxp: export pavp client to me client bus"

Core Changes:

- Update ttm_move_memcpy for async use (Thomas)

Driver Changes:

- Enable GuC submission by default on DG1 (Matt B)
- Add PXP (Protected Xe Path) support for Gen12 integrated (Daniele,
  Sean, Anshuman)
  See "drm/i915/pxp: add PXP documentation" for details!
- Remove force_probe protection for ADL-S (Raviteja)
- Add base support for XeHP/XeHP SDV (Matt R, Stuart, Lucas)
- Handle DRI_PRIME=1 on Intel igfx + Intel dgfx hybrid graphics setup (Tvrtko)
- Use Transparent Hugepages when IOMMU is enabled (Tvrtko, Chris)
- Implement LMEM backup and restore for suspend / resume (Thomas)
- Report INSTDONE_GEOM values in error state for DG2 (Matt R)
- Add DG2-specific shadow register table (Matt R)
- Update Gen11/Gen12/XeHP shadow register tables (Matt R)
- Maintain backward-compatible nested batch behavior on TGL+ (Matt R)
- Add new LRI reg offsets for DG2 (Akeem)
- Initialize unused MOCS entries to device specific values (Ayaz)
- Track and use the correct UC MOCS index on Gen12 (Ayaz)
- Add separate MOCS table for Gen12 devices other than TGL/RKL (Ayaz)
- Simplify the locking and eliminate some RCU usage (Daniel)
- Add some flushing for the 64K GTT path (Matt A)
- Mark GPU wedging on driver unregister unrecoverable (Janusz)

- Major rework in the GuC codebase, simplify locking and add docs (Matt B)
- Add DG1 GuC/HuC firmwares (Daniele, Matt B)
- Remember to call i915_sw_fence_fini on guc_state.blocked (Matt A)
- Use "gt" forcewake domain name for error messages instead of "blitter" (Matt R)
- Drop now duplicate LMEM uAPI RFC kerneldoc section (Daniel)
- Fix early tracepoints for requests (Matt A)
- Use locked access to ctx->engines in set_priority (Daniel)
- Convert gen6/gen7/gen8 read operations to fwtable (Matt R)
- Drop gen11/gen12 specific mmio write handlers (Matt R)
- Drop gen11 specific mmio read handlers (Matt R)
- Use designated initializers for init/exit table (Kees)
- Fix syncmap memory leak (Matt B)
- Add pretty printing for buddy allocator state debug (Matt A)
- Fix potential error pointer dereference in pinned_context() (Dan)
- Remove IS_ACTIVE macro (Lucas)
- Static code checker fixes (Nathan)
- Clean up disabled warnings (Nathan)
- Increase timeout in i915_gem_contexts selftests 5x for GuC submission (Matt B)
- Ensure wa_init_finish() is called for ctx workaround list (Matt R)
- Initialize L3CC table in mocs init (Sreedhar, Ayaz, Ram)
- Get PM ref before accessing HW register (Vinay)
- Move __i915_gem_free_object to ttm_bo_destroy (Maarten)
- Deduplicate frequency dump on debugfs (Lucas)
- Make wa list per-gt (Venkata)
- Do not define dummy vma in stack (Venkata)
- Take pinning into account in __i915_gem_object_is_lmem (Matt B, Thomas)
- Do not report currently active engine when describing objects (Tvrtko)
- Fix pdfdocs build error by removing nested grid from GuC docs (Akira)
- Remove false warning from the rps worker (Tejas)
- Flush buffer pools on driver remove (Janusz)
- Fix runtime pm handling in i915_gem_shrink (Maarten)
- Rework TTM object initialization slightly (Thomas)
- Use fixed offset for PTEs location (Michal Wa)
- Verify result from CTB (de)register action and improve error messages (Michal Wa)
- Fix bug in user proto-context creation that leaked contexts (Matt B)

- Re-use Gen11 forcewake read functions on Gen12 (Matt R)
- Make shadow tables range-based (Matt R)
- Ditch the i915_gem_ww_ctx loop member (Thomas, Maarten)
- Use NULL instead of 0 where appropriate (Ville)
- Rename pci/debugfs functions to respect file prefix (Jani, Lucas)
- Drop guc_communication_enabled (Daniele)
- Selftest fixes (Thomas, Daniel, Matt A, Maarten)
- Clean up inconsistent indenting (Colin)
- Use direction definition DMA_BIDIRECTIONAL instead of
  PCI_DMA_BIDIRECTIONAL (Cai)
- Add "intel_" as prefix in set_mocs_index() (Ayaz)

From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YWAO80MB2eyToYoy@jlahtine-mobl.ger.corp.intel.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
3 years agoMerge tag 'drm-intel-next-2021-10-04' of git://anongit.freedesktop.org/drm/drm-intel...
Dave Airlie [Mon, 11 Oct 2021 06:53:56 +0000 (16:53 +1000)]
Merge tag 'drm-intel-next-2021-10-04' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Cross-subsystem Changes:
- fbdev/efifb: Release PCI device's runtime PM ref during FB destr\
oy (Imre)

i915 Core Driver Changes:
- Only access SFC_DONE in media when not fused off for graphics 12 and newer.
- Double Memory latency values from pcode for DG2 (Matt Roper)
- ADL-S PCI ID update (Tejas)
- New DG1 PCI ID (Jose)
- Fix regression with uncore refactoring (Dave)

i915 Display Changes:
- ADL-P display (XE_LPD) fixes and updates (Ankit, Jani, Matt Roper, Anusham, Jose, Imre, Vandita)
- DG2 display fixes (Ankit, Jani)
- Expand PCH_CNP tweaked display workaround to all newer displays (Anshuman)
- General display simplifications and clean-ups (Jani, Swati, Jose, Ville)
- PSR Clean-ups, dropping support for BDW/HSD and enable PSR2 selective fetch by default (Jose, Gwan-gyeong)
- Nuke ORIGIN_GTT (Jose)
- Return proper DPRX link training result (Lee)
- FBC related refactor and fixes (Ville)
- Yet another attempt to solve the fast+narrow vs slow+wide eDP link training (Kai-Heng)
- DP 2.0 preparation work (Jani)
- Silence __iomem sparse warn (Ville)
- Clean up DPLL stuff (Ville)
- Fix various dp/edp max rates (Matt Atwood, Animesh, Jani)
- Remove VBT ddi_port_info caching (Jani)
- DSI driver improvements (Lee)
- HDCP fixes (Juston)
- Associate ACPI connector nodes with connector entries (Heikki)
- Add support for out-of-bound hotplug events (Hans)
- VESA vendor block and drm/i915 MSO use of it (Jani)
- Fixes for bigjoiner (Ville)
- Update memory bandwidth parameters (RK)
- DMC related fixes (Chris, Jose)
- HDR related fixes and improvements (Tejas)
- g4x/vlv/chv CxSR/wm fixes/cleanups (Ville)
- Use BIOS provided value for RKL Audio's HDA link (Kai-Heng)
- Fix the dsc check while selecting min_cdclk (Vandita)
- Split and constify vtable (Dave)
- Add ww context to intel_dpt_pin (Maarten)
- Fix bdb version check (Lukasz)
- DP per-lane drive settings prep work and other DP fixes (Ville)

Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Tue 05 Oct 2021 04:58:16 AEST
# gpg:                using RSA key 6D207068EEDD65091C2CE2A3FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>" [unknown]
# gpg:                 aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C  E2A3 FA62 5F64 0EEB 13CA
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YVtPk6llsxBFiw7W@intel.com
3 years agoMerge tag 'drm-misc-next-2021-10-06' of git://anongit.freedesktop.org/drm/drm-misc...
Dave Airlie [Mon, 11 Oct 2021 02:39:14 +0000 (12:39 +1000)]
Merge tag 'drm-misc-next-2021-10-06' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.16:

UAPI Changes:
- Allow empty drm leases for creating separate GEM namespaces.

Cross-subsystem Changes:
- Slightly rework dma_buf_poll.
- Add dma_resv_for_each_fence_unlocked to iterate, and use it inside
  the lockless dma-resv functions.

Core Changes:
- Allow devm_drm_of_get_bridge to build without CONFIG_OF for compile testing.
- Add more DP2 headers.
- fix CONFIG_FB dependency in fb_helper.
- Add DRM_FORMAT_R8 to drm_format_info, and helpers for RGB332 and RGB888.
- Fix crash on a 0 or invalid EDID.

Driver Changes:
- Apply and revert DRM_MODESET_LOCK_ALL_BEGIN.
- Add mode_valid to ti-sn65dsi86 bridge.
- Support multiple syncobjs in v3d.
- Add R8, RGB332 and RGB888 pixel formats to GUD.
- Use devm_add_action_or_reset in dw-hdmi-cec.

Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Wed 06 Oct 2021 20:48:12 AEST
# gpg:                using RSA key B97BD6A80CAC4981091AE547FE558C72A67013C3
# gpg: Good signature from "Maarten Lankhorst <maarten.lankhorst@linux.intel.com>" [expired]
# gpg:                 aka "Maarten Lankhorst <maarten@debian.org>" [expired]
# gpg:                 aka "Maarten Lankhorst <maarten.lankhorst@canonical.com>" [expired]
# gpg: Note: This key has expired!
# Primary key fingerprint: B97B D6A8 0CAC 4981 091A  E547 FE55 8C72 A670 13C3
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2602f4e9-a8ac-83f8-6c2a-39fd9ca2e1ba@linux.intel.com
3 years agoMerge tag 'amd-drm-next-5.16-2021-10-08' of https://gitlab.freedesktop.org/agd5f...
Dave Airlie [Mon, 11 Oct 2021 01:05:18 +0000 (11:05 +1000)]
Merge tag 'amd-drm-next-5.16-2021-10-08' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.16-2021-10-08:

amdgpu:
- gart BO pin count fix
- RAS fixes
- Misc display fixes
- Misc code cleanups
- Validate IP discovery table
- IOMMU handling fixes for hotplug
- Cyan Skillfish display support
- DP 2.0 fixes
- Covert vega and navi to IP discovery based asic enumeration
- JPEG fixes
- More FP cleanup for display
- DCC fixes for DCN3.x
- Initial USB4 DP tunnelling support
- Aldebaran MCE support

amdkfd:
- Misc bug fixes
- Misc code cleanups
- RAS fixes

x86/MCE:
- Export symbol for use by GPU driver

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211008200345.4689-1-alexander.deucher@amd.com
3 years agodrm/amd/display: fix duplicated inclusion
kernel test robot [Fri, 8 Oct 2021 14:40:34 +0000 (10:40 -0400)]
drm/amd/display: fix duplicated inclusion

Generated by: scripts/checkincludes.pl

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: remove duplicate include in dcn201_clk_mgr.c
Lv Ruyi [Fri, 8 Oct 2021 08:40:19 +0000 (08:40 +0000)]
drm/amd/display: remove duplicate include in dcn201_clk_mgr.c

Remove all but the first include of reg_helper.h and core_types.h
from dcn201_clk_mgr.c.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu: use adev_to_drm for consistency when accessing drm_device
Guchun Chen [Fri, 8 Oct 2021 17:21:45 +0000 (13:21 -0400)]
drm/amdgpu: use adev_to_drm for consistency when accessing drm_device

adev_to_drm is used everywhere, so improve recent changes
when accessing drm_device pointer from amdgpu_device.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdkfd: rm BO resv on validation to avoid deadlock
Alex Sierra [Thu, 7 Oct 2021 17:04:09 +0000 (12:04 -0500)]
drm/amdkfd: rm BO resv on validation to avoid deadlock

This fix the deadlock with the BO reservations during SVM_BO evictions
while allocations in VRAM are concurrently performed. More specific,
while the ttm waits for the fence to be signaled (ttm_bo_wait), it
already has the BO reserved. In parallel, the restore worker might be
running, prefetching memory to VRAM. This also requires to reserve the
BO, but blocks the mmap semaphore first. The deadlock happens when the
SVM_BO eviction worker kicks in and waits for the mmap semaphore held
in restore worker. Preventing signal the fence back, causing the
deadlock until the ttm times out.

We don't need to hold the BO reservation anymore during validation
and mapping. Now the physical addresses are taken from hmm_range_fault.
We also take migrate_mutex to prevent range migration while
validate_and_map update GPU page table.

Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: Fix Werror when building
Wayne Lin [Fri, 8 Oct 2021 07:08:37 +0000 (15:08 +0800)]
drm/amd/display: Fix Werror when building

[Why & How]
Got Werror when building with Clang-13:

drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:195:2:
error: variable 'ts' is used uninitialized whenever switch default is
taken [-Werror,-Wsometimes-uninitialized]

        default:

        ^~~~~~~

drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:200:9:
note: uninitialized use occurs here

        return ts;

               ^~

drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:180:2:
note: variable 'ts' is declared here

        enum dpia_set_config_ts ts;

        ^

1 error generated.

Fix it.

Reported-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu: add missing case for HDP for renoir
Alex Deucher [Fri, 1 Oct 2021 17:20:34 +0000 (13:20 -0400)]
drm/amdgpu: add missing case for HDP for renoir

Missing 4.1.2.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: Remove redundant initialization of variable result
Colin Ian King [Thu, 7 Oct 2021 12:06:37 +0000 (13:06 +0100)]
drm/amd/display: Remove redundant initialization of variable result

The variable result is being initialized with a value that is never
read, it is being updated immediately afterwards in both branches
of an if statement. The assignment is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu/discovery: add missing case for SMU 11.0.5
Alex Deucher [Thu, 7 Oct 2021 14:02:13 +0000 (10:02 -0400)]
drm/amdgpu/discovery: add missing case for SMU 11.0.5

Was missed when converting the driver over to IP based
initialization.

Tested-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agoMerge tag 'du-next-20211007' of git://linuxtv.org/pinchartl/media into drm-next
Dave Airlie [Fri, 8 Oct 2021 02:26:45 +0000 (12:26 +1000)]
Merge tag 'du-next-20211007' of git://linuxtv.org/pinchartl/media into drm-next

R-Car DU improvements & enhancements to misc drivers

Most notably,

- Non-contiguous buffer import support for rcar-du
- r8a779a0 support preparation for rcar-du
- COMPILE_TEST fixes for omapdrm and sti

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YV5jfi+/qjTJKeb3@pendragon.ideasonboard.com
3 years agodrm/i915: remove IS_ACTIVE
Lucas De Marchi [Tue, 5 Oct 2021 17:17:28 +0000 (10:17 -0700)]
drm/i915: remove IS_ACTIVE

When trying to bring IS_ACTIVE to linux/kconfig.h I thought it wouldn't
provide much value just encapsulating it in a boolean context. So I also
added the support for handling undefined macros as the IS_ENABLED()
counterpart. However the feedback received from Masahiro Yamada was that
it is too ugly, not providing much value. And just wrapping in a boolean
context is too dumb - we could simply open code it.

As detailed in commit babaab2f4738 ("drm/i915: Encapsulate kconfig
constant values inside boolean predicates"), the IS_ACTIVE macro was
added to workaround a compilation warning. However after checking again
our current uses of IS_ACTIVE it turned out there is only
1 case in which it triggers a warning in clang (due
-Wconstant-logical-operand) and 2 in smatch. All the others
can simply use the shorter version, without wrapping it in any macro.

So here I'm dialing all the way back to simply removing the macro. That
single case hit by clang can be changed to make the constant come first,
so it doesn't think it's mask:

-       if (context && CONFIG_DRM_I915_FENCE_TIMEOUT)
+       if (CONFIG_DRM_I915_FENCE_TIMEOUT && context)

As talked with Dan Carpenter, that logic will be added in smatch as
well, so it will also stop warning about it.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005171728.3147094-1-lucas.demarchi@intel.com
3 years agodrm/amdgpu: unify BO evicting method in amdgpu_ttm
Nirmoy Das [Wed, 6 Oct 2021 15:55:00 +0000 (17:55 +0200)]
drm/amdgpu: unify BO evicting method in amdgpu_ttm

Unify BO evicting functionality for possible memory
types in amdgpu_ttm.c.

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm: rcar-du: Add r8a779a0 device support
Kieran Bingham [Wed, 22 Sep 2021 23:47:26 +0000 (00:47 +0100)]
drm: rcar-du: Add r8a779a0 device support

Extend the rcar_du_device_info structure and rcar_du_output enum to
support DSI outputs and utilise these additions to provide support for
the R8A779A0 V3U platform.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
3 years agodrm: rcar-du: Split CRTC IRQ and Clock features
Kieran Bingham [Wed, 22 Sep 2021 23:47:25 +0000 (00:47 +0100)]
drm: rcar-du: Split CRTC IRQ and Clock features

Not all platforms require both per-crtc IRQ and per-crtc clock
management. In preparation for suppporting such platforms, split the
feature macro to be able to specify both features independently.

The other features are incremented accordingly, to keep the two crtc
features adjacent.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
3 years agodrm: rcar-du: Fix DIDSR field name
Kieran Bingham [Wed, 22 Sep 2021 23:47:24 +0000 (00:47 +0100)]
drm: rcar-du: Fix DIDSR field name

The DIDSR fields named LDCS were incorrectly defined as LCDS.
Both the Gen2 and Gen3 documentation refer to the fields as the "LVDS
Dot Clock Select".

Correct the definitions.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>