* buildsym.c (record_pending_block): Now static.
* buildsym.h: (record_pending_block): Remove.

2012-03-12  Andreas Tobler  <andreast@fgznet.ch>

        * amd64bsd-nat.c: Include amd64bsd-nat.h.

*** empty log message ***

daily update

*** empty log message ***

daily update

*** empty log message ***

include/opcode/
* ppc.h: Add PPC_OPCODE_ALTIVEC2, PPC_OPCODE_E6500, PPC_OPCODE_TMR.
opcodes/
* ppc-dis.c (ppc_opts): Add entries for "e5500" and "e6500".
* ppc-opc.c (insert_ls, TMR, ESYNC, XSYNCLE_MASK): New.
(PPCVEC2, PPCTMR, E6500): New short names.
(powerpc_opcodes): Add vabsdub, vabsduh, vabsduw, dni, mvidsplt,
mviwsplt, icblq., mftmr, mttmr, dcblq., miso, lvexbx, lvexhx,
lvexwx, stvexbx, stvexhx, stvexwx, lvepx, lvepxl, stvepx, stvepxl,
lvtrx, lvtrxl, lvtlx, lvtlxl, stvfrx, stvfrxl, stvflx, stvflxl,
lvswx, lvswxl, stvswx, stvswxl, lvsm mnemonics. Accept LS, ESYNC
optional operands on sync instruction for E6500 target.
bfd/
* archures.c: Add bfd_mach_ppc_e5500 and bfd_mach_ppc_e6500.
* bfd-in2.h: Regenerate.
* cpu-powerpc.c (bfd_powerpc_archs): Add entryies for
bfd_mach_ppc_e5500 and bfd_mach_ppc_e6500.
gas/
* config/tc-ppc.c (md_show_usage): Document -me5500 and -me6500.
(ppc_handle_align): Add termination nop opcode for e500mc family.
* doc/as.texinfo: Document options -me5500 and -me6500.
* doc/c-ppc.texi: Likewise.
gas/testsuite/
* gas/ppc/e500mc64_nop.s: New test case for e500mc family
termination nops.
* gas/ppc/e500mc64_nop.d: Likewise.
* gas/ppc/e5500_nop.s: Likewise.
* gas/ppc/e5500_nop.d: Likewise.
* gas/ppc/e6500_nop.s: Likewise.
* gas/ppc/e6500_nop.d: Likewise.
* gas/ppc/e6500.s: New.
* gas/ppc/e6500.d: Likewise.
* gas/ppc/ppc.exp: Run e6500, e500mc64_nop, e5500_nop, and e6500_nop.

daily update

2012-03-09  Jeff Johnston  <jjohnstn@redhat.com>

        * COPYING.NEWLIB: Modify DJ Delorie license to include
        modification rights in clause as permitted by DJ Delorie.
        * COPYING.LIBGLOSS: Ditto.

* dwarf2read.c (struct dwarf2_cu) <checked_producer,
producer_is_gxx_lt_4_6>: New fields.
(producer_is_gxx_lt_4_6): Use and update producer cache fields.

* dwarf2read.c (dwarf2_attr): Avoid tail-recursive call.

2012-03-09  Jeff Johnston  <jjohnstn@redhat.com>

        * COPYING.NEWLIB: Remove two unused licenses.

Restore R_386_IRELATIVE and R_X86_64_IRELATIVE

bfd/

2012-03-09  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/13817
* bfd/elf32-i386.c (elf_i386_relocate_section): Restore
R_386_IRELATIVE.

* * elf64-x86-64.c (elf_x86_64_relocate_section): Restore
R_X86_64_IRELATIVE.

ld/testsuite/

2012-03-09  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/13817
* ld-i386/pr13302.d: Updated.
* ld-x86-64/pr13082-5b.d: Likewise.
* ld-x86-64/pr13082-6a.d: Likewise.
* ld-x86-64/pr13082-6b.d: Likewise.

Fix a couple of ChangeLog entries.

* lib/gdb.exp (gdb_get_line_number): Throw an
error instead of returning -1.
* gdb.base/break.exp: Remove unused variable
bp_location5.
* gdb.base/hbreak2.exp: Likewise.
* gdb.base/sepdebug.exp: Likewise.

2012-03-08  Yao Qi  <yao@codesourcery.com>
    Pedro Alves  <palves@redhat.com>

Fix PR server/13392.
* linux-x86-low.c (amd64_install_fast_tracepoint_jump_pad): Check
offset of JMP insn.
* tracepoint.c (remove_tracepoint): New.
(cmd_qtdp): Call remove_tracepoint when failed to install.

2012-03-08  Yao Qi  <yao@codesourcery.com>
    Pedro Alves  <palves@redhat.com>

Fix PR server/13392.
* gdb.trace/change-loc.exp (tracepoint_change_loc_1): Remove kfail.
(tracepoint_change_loc_2): Remove kfail.  Return if failed to
download tracepoints.
* gdb.trace/pending.exp (pending_tracepoint_works): Likewise.
(pending_tracepoint_resolved_during_trace): Likewise.
(pending_tracepoint_installed_during_trace): Likewise.
(pending_tracepoint_with_action_resolved): Likewise.

Add missing _initialize_ravenscar_sparc prototype.

This is required now that we compile GDB with -Wmissing-prototype.

gdb/ChangeLog:

        * ravenscar-sparc-thread.c (_initialize_ravenscar_sparc): Add
        prototype.

Add missing _initialize_ravenscar prototype.

gdb/ChangeLog:

        * ravenscar-thread.c (_initialize_ravenscar): Add prototype.

*** empty log message ***

daily update

gdb/
Fix -Wmissing-prototypes build.
* arm-linux-nat.c (get_thread_id): Make it static.
* xtensa-linux-nat.c (get_thread_id): Likewise.

Make breakpoint condition detection trace conditional on remote_debug.

gdb/gdbserver/ChangeLog:

        * server.c (process_point_options): If a conditional expression
        is found, only print a message if remote_debug is nonzero.

* gdb.ada/array_bounds.exp: Get breakpoint for line
with "START", not "STOP".
* gdb.python/py-infthread.exp: Do not continue to
line marked "Break here.", which is undefined.

Revert "ax-gdb: Do not treat enums and bools as integers."

This patch was checked hasn't been reviewed and has been checked in
by mistake (wrong patch applied).

2012-03-08  Luis Machado  <lgustavo@codesourcery.com>

Revert:

2012-03-03  Jan Kratochvil  <jan.kratochvil@redhat.com>

Implement testsuite workaround for PR breakpoints/13781.
* gdb.cp/mb-templates.exp: New loop with variable $workaround.
(set breakpoint condition-evaluation host): New conditional command.

2012-03-08  Luis Machado  <lgustavo@codesourcery.com>

* ax-gdb.c (gen_fetch): Fail gracefully and use error instead
of internal error for unknown/unsupported types.

ax-gdb: Do not treat enums and bools as integers.

This patch fixes a problem when using gdb + gdbserver, and trying
to break on a function when one of the (enum) parameters is equal
to a certain value, and the size of that enum is 1 byte.

    (gdb) break mixed.adb:15 if light = green
    Breakpoint 2 at 0x402d5a: file mixed.adb, line 15.
    (gdb) cont
    Continuing.
    [Inferior 1 (process 9742) exited normally]

The debugger should have stopped once when our function was call
with light set to green.

Here is what happens: Because we're using a recent GDBserver,
GDB hands off the evaluation of the condition to GDBserver, by
providing it in the Z0 packet. This is what GDB sends:

    $Z0,402d5a,1;X13,26000622100223ff1c16100219162022011327#cf

I decoded the condition as follow:

    260006    reg 6 -> push
    2210      const8 0x10 -> push
    02        add (stack now has 1 element equal to reg6 + 16)
    23ff1c    const16 0xff1c
    1610      ext 16 (sign extend 16 bits)
    02        add (stack now has 1 element equal to reg6 + 16 - 228)
    19        ref32: Pop as addr, push 32bit value at addr.
    1620      ext 32 (sign extend 32 bits)
    2201      const8 0x01
    13        equal
    27        end

The beginning of the agent expression can be explained by the address
of symbol "light":

    (gdb) info addr light
    Symbol "light" is a variable at frame base reg $rbp offset 16+-228.

However, the mistake is the "ext 32" operation (extend 32 bits),
because our variable is *not* 32bits, only 8:

    (gdb) print light'size
    $5 = 8

But the reason why GDB decides to use a 32bit extension is because
it overrides the symbol's type with a plain integer type in
ax-gdb.c:gen_usual_unary...

      /* If the value is an enum or a bool, call it an integer.  */
    case TYPE_CODE_ENUM:
    case TYPE_CODE_BOOL:
      value->type = builtin_type (exp->gdbarch)->builtin_int;
      break;

... before calling require_rvalue. And of course, that causes the
generator to generate a sizeof(int) extension of the result.

One way to fix this would be to use an integer type of the correct
size, but I do not understand why this is necessary. The two routines
that use that information to generate the opcode down the line are
gen_fetch (for a memory value), or gen_extend (for a register value).
And they both have handling of enums and bools.

So the fix we elected to implement was simply to remove that code.

gdb/ChangeLog:

        * ax-gdb.c (gen_usual_unary): Remove special handling of
        enum and bool types.

gdb/
Fix CU relative vs. absolute DIE offsets.
* dwarf2loc.h (dwarf2_fetch_die_location_block): Rename parameter
offset to offset_in_cu.
* dwarf2read.c (process_enumeration_scope): Add CU offset to
TYPE_OFFSET.
(dwarf2_fetch_die_location_block): Rename parameter offset to
offset_in_cu.  New variable offset, add CU offset to OFFSET_IN_CU.

gdb/testsuite/
Fix CU relative vs. absolute DIE offsets.
* gdb.dwarf2/dw2-op-call.S: New compilation unit preceding the existing
one.

gdb/
* libunwind-frame.c: Rename to ...
* ia64-libunwind-tdep.c: ... here.
* libunwind-frame.h: Rename to ...
* ia64-libunwind-tdep.h: ... here.
* Makefile.in (HFILES_NO_SRCDIR): Rename libunwind-frame.h to
ia64-libunwind-tdep.h.
(ALLDEPFILES): Rename libunwind-frame.c to ia64-libunwind-tdep.c.
* README (--with-libunwind): Rename to ...
(--with-libunwind-ia64): ... here, note it is ia64 specific now.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac: New option --with-libunwind-ia64, make the
AS_HELP_STRING ia64 specific.  Deprecate option --with-libunwind.
Remove AC_DEFINE for HAVE_LIBUNWIND.
* ia64-libunwind-tdep.c: Make the file top comment ia64 specific.
Rename libunwind-frame.h #include to ia64-libunwind-tdep.h.
Rename libunwind-frame in the general comment.
* ia64-libunwind-tdep.h: Make the file top comment ia64 specific.
Rename symbol LIBUNWIND_FRAME_H to IA64_TDEP_LIBUNWIND_FRAME_H.
Move forward declarations inside #ifndef.  Rename libunwind-frame in
the general comment.
* ia64-tdep.c: Rename libunwind-frame.h #include to
ia64-libunwind-tdep.h.
(ia64_gdb2uw_regnum, ia64_uw2gdb_regnum, ia64_is_fpreg)
(ia64_libunwind_descr): Rename libunwind-frame to
ia64-libunwind-tdep in these function comments.
* ia64-tdep.h: Rename libunwind-frame.h #include to
ia64-libunwind-tdep.h.
* ia64-vms-tdep.c (ia64_vms_libunwind_descr): Rename libunwind-frame to
ia64-libunwind-tdep in that data comment.

gdb/
* libunwind-frame.h (struct frame_unwind): New declaration.

2012-03-08  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

* s390-opc.txt: Set instruction type of pku to SS_L2RDRD.

2012-03-08  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

* gas/s390/esa-g5.d: Move length field to the second operand.
* gas/s390/esa-g5.s: Likewise.

Fix thinko in help of "set breakpoint condition-evaluation".

The 3 valid values for this setting are "auto", "host" and "target".
The help was advertising one of them to be "gdb" instead of "host".

gdb/ChangeLog:

        * breakpoint.c (_initialize_breakpoint): Fix error in help of
        "set breakpoint condition-evaluation" command.

gdb/
2012-03-08  Tristan Gingold  <gingold@adacore.com>

* sparc-stub.c: Move to stubs/
* sh-stub.c: Likewise.
* m68k-stub.c: Likewise.
* m32r-stub.c: Likewise.
* i386-stub.c: Likewise.

gdb/stubs/
2012-03-08  Tristan Gingold  <gingold@adacore.com>

* sparc-stub.c: Move from ..
* sh-stub.c: Likewise.
* m68k-stub.c: Likewise.
* m32r-stub.c: Likewise.
* i386-stub.c: Likewise.

2012-03-08  Tristan Gingold  <gingold@adacore.com>

* vms-lib.c (_bfd_vms_lib_write_archive_contents): Set maximum
keylen according to archive kind.  Set nextvbn and nextrfa lhd
fields.  Add comments.

2012-03-08  Tristan Gingold  <gingold@adacore.com>

* lbr.h (struct vms_lhd): Add comments.

2012-03-08  Tristan Gingold  <gingold@adacore.com>

        * ldexp.c (exp_print_tree): Special case for SEGMENT_START.
        (exp_print_token): Constify.

* m68klinux-tdep.c (m68k_linux_init_abi): Register
linux_get_siginfo_type.

* m68klinux-nat.c: Include "gdb_proc_service.h".
(PTRACE_GET_THREAD_AREA): Define.
(ps_get_thread_area): New function.

gdb/
* remote.c (remote_get_noisy_reply): Replace `sprintf' with
`xsnprintf'.
(remote_query_attached): Likewise.
(remote_static_tracepoint_marker_at): Likewise.
(remote_set_permissions): Likewise.
(remote_detach_1, extended_remote_attach_1): Likewise.
(send_g_packet, remote_vkill): Likewise.
(extended_remote_disable_randomization): Likewise.
(remote_add_target_side_condition): Likewise.
(remote_insert_breakpoint): Likewise.
(remote_remove_breakpoint): Likewise.
(remote_insert_watchpoint): Likewise.
(remote_remove_watchpoint): Likewise.
(remote_insert_hw_breakpoint): Likewise.
(remote_insert_hw_breakpoint): Likewise.
(remote_remove_hw_breakpoint): Likewise.
(remote_download_command_source): Likewise.
(remote_download_tracepoint): Likewise.
(remote_download_trace_state_variable): Likewise.
(remote_disable_tracepoint): Likewise.
(remote_trace_set_readonly_regions): Likewise.
(remote_get_tracepoint_status): Likewise.
(remote_trace_find): Likewise.
(remote_get_trace_state_variable_value): Likewise.
(remote_set_disconnected_tracing): Likewise.
(remote_set_circular_trace_buffer): Likewise.
(remote_get_min_fast_tracepoint_insn_len): Likewise.
(remote_use_agent): Likewise.
(remote_add_target_side_condition): Add one parameter BUF_SIZE.
Update callers.

gdb/testsuite/
Fix false FAIL on distros with relro linkage as default.
* gdb.reverse/solib-precsave.exp: Try to compile the test using
-Wl,-z,norelro first.

PR ld/10340
* ldfile.c (is_sysrooted_pathname): Remove notsame param.
(ldfile_add_library_path): Don't set sysrooted flag.
(ldfile_open_file_search): Likewise, and don't copy them.
(try_open): Delete exten and code handling such.  Add sysrooted
param and return whether path is in sysroot.
(ldfile_find_command_file): Delete extend param.  Add sysrooted
param.  Rename local var.  Update try_open calls.
(ldfile_open_command_file_1): Pass sysrooted to lex_push_file.
* ldfile.h (search_dirs_type): Remove sysrooted field.
* ldlang.c (new_afile): Always set sysrooted from input_flags.
(load_symbols): Don't set input_flags.sysrooted.
* ldlang.h (struct lang_input_statement_flags): Revise sysrooted
comment.
* ldlex.h (lex_push_file): Update prototype.
* ldlex.l (sysrooted_stack): New array.
(EOF): Pop input_flags.sysrooted.
(lex_push_file): Add sysrooted param.  Save and set
input_flags.sysrooted.

merge from gcc

*** empty log message ***

daily update

2012-03-07  Pedro Alves  <palves@redhat.com>

gdb/doc/
* gdb.texinfo (General Query Packets): Document new
QProgramSignals packet.
* gdb.texinfo (Remote configuration): Mention
"program-signals-packet".

gdb/gdbserver/
* linux-low.c (get_detach_signal): New.
(linux_detach_one_lwp): Get rid of a pending SIGSTOP with SIGCONT.
Pass on pending signals to PTRACE_DETACH.  Check the result of the
ptrace call.
* server.c (program_signals, program_signals_p): New.
(handle_general_set): Handle QProgramSignals.
* server.h (program_signals, program_signals_p): Declare.

gdb/
* NEWS: Mention QProgramSignals.
* inferior.h (update_signals_program_target): Declare.
* infrun.c: (update_signals_program_target): New.
(handle_command): Update the target of the new program signals
array changes.
* remote.c (PACKET_QProgramSignals): New enum.
(last_program_signals_packet): New global.
(remote_program_signals): New.
(remote_start_remote): Update the target with the program signals
list.
(remote_protocol_features): Add entry for QPassSignals.
(remote_open_1): Free anc clear last_program_signals_packet.
(init_remote_ops): Install remote_program_signals.
* target.c (update_current_target): Adjust.
(target_program_signals): New.
* target.h (struct target_ops) <to_program_signals>: New field.
(target_program_signals): Declare.

2012-03-07  Pedro Alves  <palves@redhat.com>

* NEWS: Add subtitle for new z0/z1 conditional breakpoint
extensions.

* mn10300.h (elf_mn10300_reloc_type): Add R_MN10300_TLS_GD,
R_MN10300_TLS_LD, R_MN10300_TLS_LDO, R_MN10300_TLS_GOTIE,
R_MN10300_TLS_IE, R_MN10300_TLS_LE, R_MN10300_TLS_DPTMOD,
R_MN10300_TLS_DTPOFF and R_MN10300_TLS_TPOFF.

* elf-m10300.c (elf32_mn10300_link_hash_entry): Add tls_type
field.
(elf32_mn10300_link_hash_table): Add tls_ldm_got entry;
(elf_mn10300_tdata): Define.
(elf_mn10300_local_got_tls_type): Define.
(elf_mn10300_howto_table): Add entries for R_MN10300_TLS_GD,
R_MN10300_TLS_LD, R_MN10300_TLS_LDO, R_MN10300_TLS_GOTIE,
R_MN10300_TLS_IE, R_MN10300_TLS_LE, R_MN10300_TLS_DPTMOD,
R_MN10300_TLS_DTPOFF, R_MN10300_TLS_TPOFF relocs.
(mn10300_reloc_map): Likewise.
(elf_mn10300_tls_transition): New function.
(dtpoff, tpoff, mn10300_do_tls_transition): New functions.
(mn10300_elf_check_relocs): Add TLS support.
(mn10300_elf_final_link_relocate): Likewise.
(mn10300_elf_relocate_section): Likewise.
(mn10300_elf_relax_section): Likewise.
(elf32_mn10300_link_hash_newfunc): Initialise new field.
(_bfd_mn10300_copy_indirect_symbol): New function.
(elf32_mn10300_link_hash_table_create): Initialise new fields.
(_bfd_mn10300_elf_size_dynamic_sections): Add TLS support.
(_bfd_mn10300_elf_finish_dynamic_symbol): Likewise.
(_bfd_mn10300_elf_reloc_type_class): Allocate an
elf_mn10300_obj_tdata structure.
(elf_backend_copy_indirect_symbol): Define.
* reloc.c (BFD_MN10300_TLS_GD, BFD_MN10300_TLS_LD,
BFD_MN10300_TLS_LDO, BFD_MN10300_TLS_GOTIE, BFD_MN10300_TLS_IE,
BFD_MN10300_TLS_LE, BFD_MN10300_TLS_DPTMOD,
BFD_MN10300_TLS_DTPOFF, BFD_MN10300_TLS_TPOFF): New relocations.
(BFD_RELOC_MN10300_32_PCREL, BFD_RELOC_MN10300_16_PCREL): Move to
alongside other MN10300 relocations.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.

* config/tc-mn10300.c (other_registers): Add SSP and USP.
(md_assemble): Add support for TLS relocs.
(mn10300_parse_name): Likewise.

* readelf.c (is_16bit_abs_reloc): Add detection of R_MN10300_16.

* m68klinux-nat.c (getregs_supplies): Make static.
(getfpregs_supplies): Likewise.
(have_ptrace_getregs): Likewise.

*** empty log message ***

Pass absolute die offset in call to get_die_type_at_offset

gdb/ChangeLog:

        * dwarf2read.c (dwarf2_get_die_type): Pass absolute offset
        in call to get_die_type_at_offset.

daily update

* mi/mi-cmd-break.c: Enforce coding standards, fix comments.
* mi/mi-cmd-disas.c: Ditto.
* mi/mi-cmd-env.c: Ditto.
* mi/mi-cmd-file.c: Ditto.
* mi/mi-cmd-stack.c: Ditto.
* mi/mi-cmd-target.c: Ditto.
* mi/mi-cmd-var.c: Ditto.
* mi/mi-cmds.c: Ditto.
* mi/mi-cmds.h: Ditto.
* mi/mi-console.c: Ditto.
* mi/mi-getopt.c: Ditto.
* mi/mi-getopt.h: Ditto.
* mi/mi-interp.c: Ditto.
* mi/mi-main.c: Ditto.
* mi/mi-out.c: Ditto.
* mi/mi-parse.c: Ditto.
* mi/mi-parse.h: Ditto.
* mi/mi-symbol-cmds.c: Ditto.

* mi/mi-getopt.h: Move mi_opt struct up.
* mi/mi-main.c (captured_mi_execute_command): Remove redundant
return.
* mi/mi-out.c (_initialize_mi_out): Remove empty initialize.

* elf64-x86-64.c (elf_x86_64_relocate_section): For R_X86_64_RELATIVE
set relocate to TRUE.

* proc-service.c (ps_pglobal_lookup): Set the current program
space.

New Ada testcase (bp_on_var.exp).

gdb/testsuite/ChangeLog:

* gdb.ada/bp_on_var: New testcase.

2012-03-06  Pedro Alves  <palves@redhat.com>

* gregset.h [HAVE_SYS_PROCFS_H]: Include <sys/procfs.h>.

New Ada testcase (bp_enum_homonym).

gdb/testsuite/ChangeLog:

        * gdb.ada/bp_enum_homonym: New testcase.

2012-03-06  Tristan Gingold  <gingold@adacore.com>

* corefile.c (core_create_function_syms): Do not call bsearch if
symbol_map_count is 0.

gdb/testsuite/
* gdb.trace/ftrace.exp (test_fast_tracepoints): Run test on target
x86_64-*-* and i?86-*-*.
Set up KFAIL for gdb/13808.

*** empty log message ***

Add Maciej W. Rozycki as mips maintainer.

gdb/ChangeLog:

        * MAINTAINERS: List Maciej W. Rozycki as the mips maintainer.

PR ld/13683
* ld-gc/pr13683.d: Allow non-zero top address digit.

daily update

* ldlang.h (struct lang_input_statement_flags): New, extract from..
(lang_input_statement_type): ..here.  New field "flags".
(input_flags): Declare.
(missing_file): Delete.
* ldmain.h (whole_archive): Delete.
(add_DT_NEEDED_for_regular, add_DT_NEEDED_for_dynamic): Delete.
* ld.h (ld_config_type <dynamic_link>): Delete.
* ldmain.c (whole_archive): Delete.
(add_DT_NEEDED_for_regular, add_DT_NEEDED_for_dynamic): Delete.
* ldlang.c (missing_file, ldlang_sysrooted_script): Delete.
(input_flags): New variable.  Replace all uses of config.dynamic_link,
missing_file, ldlang_sysrooted_script, whole_archive,
add_DT_NEEDED_for_regular and add_DT_NEEDED_for_dynamic with fields
from here.
* ldfile.c: Likewise.
* ldgram.y: Likewise.
* ldmain.c: Likewise.
* ldwrite.c: Likewise.
* lexsup.c: Likewise.
* plugin.c: Likewise.
* emultempl/aix.em: Likewise.
* emultempl/armelf.em: Likewise.
* emultempl/elf32.em: Likewise.
* emultempl/hppaelf.em: Likewise.
* emultempl/linux.em: Likewise.
* emultempl/pe.em: Likewise.
* emultempl/pep.em: Likewise.
* emultempl/ppc64elf.em: Likewise.
* emultempl/scoreelf.em: Likewise.
* emultempl/spuelf.em: Likewise.
* emultempl/sunos.em: Likewise.
* emultempl/vms.em: Likewise.
* ldlang.c (new_afile): Use memset to init zero fields.
(load_symbols): Simplify save and restore of flags around command
file processing.
* ldfile.c (is_sysrooted_pathname): Tidy.

* gdb.ada/operator_bp.exp: Clear debug-file-directory.
* gdb.ada/mi_task_arg.exp: Clear debug-file-directory.

gdb/
Code cleanup.
* common/linux-osdata.c (linux_common_core_of_thread): New function
comment.
* linux-nat.c (linux_nat_wait_1): Replace linux_nat_core_of_thread_1
call by linux_common_core_of_thread.
(linux_nat_core_of_thread_1): Remove.
* linux-nat.h (linux_nat_core_of_thread_1): Remove declaration.
* linux-thread-db.c: Include linux-osdata.h.
(update_thread_core): Replace linux_nat_core_of_thread_1 call by
linux_common_core_of_thread.

* value.c (value_primitive_field): Don't fetch contents for
non-virtual bases.

* jv-valprint.c (java_value_print): Correctly compute 'obj_addr'.
gdb/testsuite
* gdb.java/jprint.java (jprint.main): Keep 'x' live.

Include "gregset.h" in s390-nat.c (-Wmissing-prototypes).

gdb/ChangeLog:

        * s390-nat.c: Include "gregset.h".

PR ld/13803
* ld-arm/fix-arm1176-off.d, ld-arm/fix-arm1176-on.d: Regexpify
address of func_to_branch_to.

gdb/
* libunwind-frame.c (LIBUNWIND_SO): Change .7 to .8.
[!LIBUNWIND_SO] (LIBUNWIND_SO_7): New #define.
(libunwind_load): New variable so_error, use it for dlerror.  Try to
load also LIBUNWIND_SO_7.

gdb/gdbserver/
* linux-low.c (get_dynamic): Don't warn when PT_PHDR isn't found.
New comment why.

2012-03-05  Pedro Alves  <palves@redhat.com>

* i387-tdep.c (i387_supply_xsave): Assert the xsave section buffer
is not NULL, and remove resulting dead code.

PR ld/12152
* elfxx-sparc.c (_bfd_sparc_elf_relocate_section): Also ignore
overflows for R_SPARC_UA32 in .stab sections.

* sh-tdep.c (sh_skip_prologue): Provide an upper limit on the function
prologue to sh_analyze_prologue.
(sh_analyze_prologue): Make better use of such an upper limit, and
generally be more cautious about accessing memory.

* ia64-vms-tdep.c (_initialize_ia64_vms_tdep): Rename from
_initialize_ia64_hpux_tdep.

Mention PR gdb/13766

2012-03-05  Pedro Alves  <palves@redhat.com>

* i387-tdep.c (i387_supply_xsave): If we have an xsave buffer, and
the register state is clear, supply explicit zero, instead of
marking the register unavailable.

2012-03-05  Tristan Gingold  <gingold@adacore.com>

* configure.ac: Enable gdb and readline for ia64*-*-*vms*.
* configure: Regenerate.

2012-03-05  Tristan Gingold  <gingold@adacore.com>

* NEWS: Mention OpenVMS ia64 new target.

2012-03-05  Tristan Gingold  <gingold@adacore.com>

* buildvms.com: New file.
* ia64vms-stub.c: New file.

2012-03-05  Tristan Gingold  <gingold@adacore.com>

* ia64-tdep.h: Include libunwind-frame.h and libunwind-ia64.h.
(ia64_unw_accessors, ia64_unw_rse_accessors)
(ia64_libunwind_descr): Declare.
* ia64-vms-tdep.c: New file.
* ia64-tdep.c (ia64_unw_accessors, ia64_unw_rse_accessors)
(ia64_libunwind_descr): Make them public.
* configure.tgt: Add ia64-*-*vms*.
* Makefile.in (ALL_64_TARGET_OBS): Add ia64-vms-tdep.o
(ALLDEPFILES): Add ia64-vms-tdep.c

2012-03-05  Tristan Gingold  <gingold@adacore.com>

* target.h (target_object): Add TARGET_OBJECT_OPENVMS_UIB.
* remote.c (PACKET_qXfer_uib): New enum value.
(remote_protocol_features): Add entry for PACKET_qXfer_uib.
(remote_xfer_partial): Handle TARGET_OBJECT_OPENVMS_UIB.
(_initialize_remote): Call add_packet_config_cmd for
xfer:uib packet.

doc/
2012-03-05  Tristan Gingold  <gingold@adacore.com>

* gdb.texinfo (General Query Packets): Document xfer:uib:read.

2012-03-05  Tristan Gingold  <gingold@adacore.com>

        * osabi.c (gdb_osabi_names): Add OpenVMS.
        (generic_elf_osabi_sniffer): Likewise.
        * defs.h (gdb_osabi): Add GDB_OSABI_OPENVMS.

* configure.tgt (mips64*el-*-freebsd*, mips64*-*-freebsd*)
(mips*el-*-freebsd*, mips*-*-freebsd*): Correct triplets by
replacing trailing "-*" with "*".

*** empty log message ***

daily update

sim: bfin: drop old linux/mii.h workarounds

We had some workarounds for old linux/mii.h headers, but it breaks with
newer ones.  So tweak the checks a bit to work with newer ones.  We'll
worry about older systems once someone complains.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

gdb/
Removed unused code.
* libunwind-frame.c (libunwind_frame_unwind)
(libunwind_frame_base_address): Remove.
* libunwind-frame.h (libunwind_frame_base_address): Remove declaration.

gdb/
* common/agent.c (gdb_connect_sync_socket): Add _ markup and
remove trailing new line.
(agent_run_command, agent_run_command): Add _ markup.
(agent_capability_check): Likewise.

Fix indent of changelog entries.

gdb/testsuite/
* gdb.base/disp-step-syscall.exp (disp_step_cross_syscall): Catch error
messages for KFAIL.

*** empty log message ***

daily update

gdb/testsuite/
* gdb.ada/arrayidx.exp: Call get_compiler_info.  New variable old_gcc.
(print one_two_three, indexes off, print few_reps, indexes off)
(print many_reps, indexes off, print empty, indexes off)
(print one_two_three, print few_reps, print many_reps, print empty):
Call setup_xfail if $gcc_old.

gdb/
* breakpoint.c (set_condition_evaluation_mode): Set
CONDITION_EVALUATION_MODE unconditionally.

gdb/testsuite/
Implement testsuite workaround for PR breakpoints/13781.
* gdb.cp/mb-templates.exp: New loop with variable $workaround.
(set breakpoint condition-evaluation host): New conditional command.

gdb/testsuite/
Code cleanup.
* gdb.cp/mb-templates.exp: New variables executable.  Use it for
binfile.  use clean_restart.  Replace gdb_expect by gdb_test_multiple.
Replace GDB restart by kill and delete_breakpoints.  Replace breakpoint
number 1 by $bpnum.  Four times.

gdb:
* common/agent.c (agent_look_up_symbols): Add one parameter 'arg'.
* common/agent.h: Update declaration.
* inf-child.c (inf_child_use_agent): New.
(inf_child_can_use_agent): New.
(inf_child_target): Initialize fields `to_use_agent'
and `to_can_use_agent'.
* agent.c (agent_new_objfile): New.
        (_initialize_agent): Add agent_new_objfile to new_objfile
observer.

* linux-nat.c (linux_child_static_tracepoint_markers_by_strid):
New.
        (linux_target_install_ops): Initialize field
`to_static_tracepoint_markers_by_strid'.
* remote.c (free_current_marker): Move it to ...
* tracepoint.c (free_current_marker): ... here.  New.
(cleanup_target_stop): New.
* tracepoint.h: Declare free_current_marker.
* NEWS: Add one entry about `info static-tracepoint-marker'.

gdb/gdbserver:
* tracepoint.c (tracepoint_look_up_symbols): Update call to
agent_look_up_symbols.

gdb/testsuite:
* gdb.trace/strace.exp: run strace_info_marker in linux native gdb.

gdb/testsuite/
Setup KFAIL for PR server/13796.
* gdb.base/disp-step-syscall.exp (single step over vfork): Setup KFAIL.