Johann Koenig [Thu, 13 Jun 2019 18:40:42 +0000 (18:40 +0000)]
Merge "ppc: disable vsx optimizations with hbd"
Johann [Mon, 10 Jun 2019 22:08:40 +0000 (15:08 -0700)]
sse: remove unused HAVE_SSE files
There are no sse functions which use these files. Cleans up spurious
warnings when building with --disable-sse2
Change-Id: I04d84b8b7ecfe6da7d5d4df63840796c7b04c085
Johann [Mon, 10 Jun 2019 21:35:03 +0000 (14:35 -0700)]
ppc: disable vsx optimizations with hbd
vsx optimizations do not support 32 bit tran_low_t values.
BUG=webm:1563
Change-Id: I9e6348078f6e4855acfd381133eb840a435b7f81
James Zern [Fri, 7 Jun 2019 22:06:29 +0000 (15:06 -0700)]
update libwebm to libwebm-1.0.0.27-361-g81de00c
81de00c Check there is only one settings per ContentCompression
5623013 Fixes a double free in ContentEncoding
93b2ba0 mkvparser: quiet static analysis warnings
Change-Id: Ieaa562ef2f10075381bd856388e6b29f97ca2746
Jerome Jiang [Thu, 6 Jun 2019 22:38:13 +0000 (15:38 -0700)]
vp8: fix leak in vp8e_mr_alloc_mem
BUG=webm:1596
Change-Id: I09ba00a7b7ad331671a7a285a2ac5630d8b62199
Sai Deng [Thu, 6 Jun 2019 15:50:14 +0000 (15:50 +0000)]
Merge "Update performance test results for tune=SSIM"
Sai Deng [Thu, 6 Jun 2019 06:13:08 +0000 (06:13 +0000)]
Merge "Fix a bug in best RD cost updating"
sdeng [Thu, 6 Jun 2019 03:40:16 +0000 (20:40 -0700)]
Update performance test results for tune=SSIM
I made a mistake (used the outdated baseline) in the CL I
submitted earlier this week:
https://chromium-review.googlesource.com/c/webm/libvpx/+/1638854
The corrected results are following:
The additional gains/loss on top of the tune=ssim are:
Data Set Overall PSNR SSIM MS-SSIM
Lowres 3.490 -3.164 -2.267
Midres 2.245 -2.270 -2.287
HDres 2.562 -1.804 -1.681
Lowres_10bd 3.477 -2.399 -2.689
Midres_10bd 3.467 -1.534 -1.636
The overall gains/loss comparing to tune=psnr are:
Data Set Overall PSNR SSIM MS-SSIM
Lowres 6.127 -5.818 -4.783
Midres 4.574 -5.383 -6.242
HDres 4.908 -6.218 -7.106
Lowres_10bd 6.115 -6.212 -7.790
Midres_10bd 6.238 -6.064 -7.249
Change-Id: Iae72482f7b30f200e5021a98c920eed841d0972a
sdeng [Tue, 4 Jun 2019 20:54:18 +0000 (13:54 -0700)]
Fix a bug in best RD cost updating
This CL fixed a bug that sometimes we calculate the best rd cost using
uninitialized rd_div. This CL also includes a small refactoring of
rd_pick_partition().
Speed change: (the smaller the better)
Performance counter stats for './vpxenc park_joy_480p.y4m --limit=50
-o output.webm':
with this CL: 297,086,181,136 instructions:u
without this CL: 299,285,835,104 instructions:u
Quality change: (negative is better)
avg_psnr ovr_psnr ssim
(low_res) 0.007 0.005 -0.002
(mid_res) 0.022 0.028 0.007
(hd_res) -0.008 -0.003 -0.014
Change-Id: I8924d8426364304212bcef3aba13346783e6f1a8
James Zern [Tue, 4 Jun 2019 21:45:36 +0000 (14:45 -0700)]
configure: test -Wno-* flags used with libyuv
with g++ this avoids:
command line option ‘-Wno-missing-prototypes’ is valid for C/ObjC but
not for C++
the flag is necessary with clang.
BUG=webm:1584
Change-Id: I250c76483302d913999e5f9e0d09ee6449b052df
James Zern [Tue, 4 Jun 2019 21:12:50 +0000 (21:12 +0000)]
Merge changes Ib73136b2,Ie514f663
* changes:
configure: enable -Wmissing-declarations for more files
vp9_thread_test: quiet -Wmissing-prototypes
Marco Paniconi [Tue, 4 Jun 2019 18:35:15 +0000 (18:35 +0000)]
Merge "vp9-rtc: Use speed 5 for postencode drop tests."
Marco Paniconi [Tue, 4 Jun 2019 17:07:11 +0000 (10:07 -0700)]
vp9-rtc: Use speed 5 for postencode drop tests.
Test was running at speed 4, which is not used for real-time.
With this change all Datarate tests are now running at
(speed >= 5, 1 pass, real-time mode), which is what they
were intended for.
BUG=webm:1512
Change-Id: I47a721dadd24b73df722c44419df7cfc06c44226
Sai Deng [Tue, 4 Jun 2019 16:10:51 +0000 (16:10 +0000)]
Merge "Hierarchical rdmult scaling when tune=ssim"
James Zern [Mon, 3 Jun 2019 21:43:24 +0000 (14:43 -0700)]
configure: enable -Wmissing-declarations for more files
avoid using it with third_party/libyuv as that still requires some work.
BUG=webm:1584
Change-Id: Ib73136b22c89d927b112364e19d725c51768bbb7
sdeng [Sat, 1 Jun 2019 00:25:09 +0000 (17:25 -0700)]
Hierarchical rdmult scaling when tune=ssim
Use different lagrangian multiplier scaling factor for different block
size. The blocks whose sizes are less than 16x16 share the same multiplier
of their parent block.
The additional gains/loss on top of the tune=ssim are:
Data Set Overall PSNR SSIM MS-SSIM
Lowres 2.918 -3.691 -2.596
Midres 1.708 -2.656 -2.624
HDres 1.619 -2.496 -2.391
Midres_10bd 1.518 -3.263 -3.561
The overall gains/loss comparing to tune=psnr are:
Data Set Overall PSNR SSIM MS-SSIM
Lowres 5.583 -6.208 -4.978
Midres 4.024 -5.610 -6.411
HDres 4.102 -6.614 -7.457
Midres_10bd 4.647 -7.181 -8.614
Change-Id: I0e6c5008488734e979b2dacde9fc2a17f3aa620f
James Zern [Tue, 4 Jun 2019 00:08:23 +0000 (17:08 -0700)]
vp9_thread_test: quiet -Wmissing-prototypes
BUG=webm:1584
Change-Id: Ie514f6630acfb018a3ac4a05758c8b4119ae28fa
Jerome Jiang [Mon, 3 Jun 2019 19:54:28 +0000 (19:54 +0000)]
Merge "Remove unused func for CONFIG_REALTIME_ONLY"
Jerome Jiang [Mon, 3 Jun 2019 17:11:34 +0000 (10:11 -0700)]
Remove unused func for CONFIG_REALTIME_ONLY
Change-Id: I503e147e20e5b69b910c425d169e59821874f627
Sai Deng [Mon, 3 Jun 2019 16:19:06 +0000 (16:19 +0000)]
Merge changes I7b1d1482,I01588758,I6f17864e
* changes:
Update rdcost using the rd_mult in current block
Use distortion and rate of best_rd as the params
Use distortion and rate recursively in rd_pick_partition()
sdeng [Fri, 31 May 2019 22:11:53 +0000 (15:11 -0700)]
Update rdcost using the rd_mult in current block
This CL is a preparation for implementing hierarchical SSIM rdmult scaling.
There is very little impact on metrics and speed:
avg_psnr ovr_psnr ssim
midres 0.009 0.009 0.015
perf stat -e instructions:u ./vpxenc park_joy_480p.y4m --limit=50
with this cl: 317,722,808,461
before: 317,700,108,619
Change-Id: I7b1d1482ac69f7bc87065a93223a0274bcbe8ce3
sdeng [Fri, 31 May 2019 21:35:02 +0000 (14:35 -0700)]
Use distortion and rate of best_rd as the params
Also added rd calculation for negative rates and distortions.
This CL is a preparation for implementing hierarchical SSIM rdmult scaling.
Little impact on quality and speed:
avg_psnr ovr_psnr ssim
(mid_res) -0.015 -0.009 -0.018
perf stat -e instructions:u ./vpxenc park_joy_480p.y4m --limit=50
with this cl: 317,700,108,619
before: 317,669,279,763
Change-Id: I01588758b7be2aab32236440ec0e57d7af56e920
Jerome Jiang [Sat, 1 Jun 2019 00:07:27 +0000 (00:07 +0000)]
Merge "Remove RD code for CONFIG_REALTIME_ONLY in vp9."
Jerome Jiang [Fri, 31 May 2019 16:41:14 +0000 (09:41 -0700)]
Remove RD code for CONFIG_REALTIME_ONLY in vp9.
This reduces vp9 only binary size by ~5.7%.
Change-Id: I57e46baf591d68b0a0cecbc9319a1190df8b0457
sdeng [Fri, 31 May 2019 20:10:08 +0000 (13:10 -0700)]
Use distortion and rate recursively in rd_pick_partition()
This CL is a preparation for implementing hierarchical SSIM rdmult scaling,
There is very little impact on metrics and speed:
avg_psnr ovr_psnr ssim
midres -0.04 0.005 0.012
perf stat -e instructions:u ./vpxenc park_joy_480p.y4m --limit=50
with this cl: 317,669,279,763
before: 317,717,562,045
Change-Id: I6f17864e7b17aad06a04ae4f470f75e975549db9
James Zern [Thu, 30 May 2019 22:22:58 +0000 (15:22 -0700)]
libvpx,vp9_datarate_test: drop one-pass vod mode
this test is only useful for realtime mode testing given the number of
frames and that one-pass vod has never been a primary focus for
development.
BUG=webm:1512
Change-Id: I23208393a5fcc5bcf9b267fab4b0d1aad500918a
Aidan Welch [Thu, 30 May 2019 01:50:10 +0000 (01:50 +0000)]
Merge "added error logging to video_writer.c similar to video_reader.c"
Johann Koenig [Wed, 29 May 2019 22:16:48 +0000 (22:16 +0000)]
Merge "remove unused svc exports"
Aidan Welch [Tue, 28 May 2019 04:46:00 +0000 (00:46 -0400)]
added error logging to video_writer.c similar to video_reader.c
Change-Id: Ib56b3e309113574a69ae09db1ee5b0fcc14ebe88
Johann [Tue, 21 May 2019 21:15:18 +0000 (14:15 -0700)]
remove unused svc exports
The spatial svc implementation has moved outside the library:
commit
ed8f189cccda9168fd400d1ba6661b1bc14a3afa
Refactor: move svc example files to from vpx/ to examples/
BUG=webm:1629
Change-Id: I31c3ae7b20a6bd50615d1d6e48d4f93beca939e6
Deepa K G [Wed, 29 May 2019 08:02:07 +0000 (08:02 +0000)]
Merge "Fix calculations in GF only group case"
Deepa K G [Wed, 29 May 2019 08:01:23 +0000 (08:01 +0000)]
Merge "Increase the bits allocated to key frame"
Marco Paniconi [Tue, 28 May 2019 15:32:10 +0000 (15:32 +0000)]
Merge "vp9-rtc: Update overshoot_detection speed feature"
Paul Wilkins [Tue, 28 May 2019 10:40:48 +0000 (10:40 +0000)]
Merge "Fix section intra rating for first ARF interval"
Marco Paniconi [Fri, 24 May 2019 17:32:08 +0000 (10:32 -0700)]
vp9-rtc: Update overshoot_detection speed feature
Keep the overshoot_detection_cbr_rt to the fast mode
(FAST_DETECTION_MAXQ), except for low-resoln at speed 5,
for non-screen content.
The increase in encode time (from using the more accurate
RE_ENCODE_MAXQ) is acceptable for speed 5 at low resoln.
Change-Id: I3089d1505553154ef046056465bc18130f7bd55a
Deepa K G [Mon, 27 May 2019 12:32:00 +0000 (18:02 +0530)]
Fix calculations in GF only group case
- Fix the number of frames considered in calculation of
twopass active worst quality. For GF only group, frames
considered should be one less than baseline gf interval
accounting for the golden frame.
- Fix in calculation of normal_frames. As baseline gf
interval includes the golden frame, the number of
normal frames should be one less than baseline gf
interval.
Change-Id: Ic752f7d13d23772687e2fa407698766b3fdf5c67
James Zern [Sat, 25 May 2019 23:41:30 +0000 (23:41 +0000)]
Merge "Revert "Fix calculations in GF only group case""
James Zern [Sat, 25 May 2019 19:55:35 +0000 (19:55 +0000)]
Revert "Fix calculations in GF only group case"
This reverts commit
c87ff4a09ddf50152918c127eebf11e3a6ef7b1e.
Reason for revert: causes division by zero
Original change's description:
> Fix calculations in GF only group case
>
> - Fix the number of frames considered in calculation of
> twopass active worst quality. For GF only group, frames
> considered should be one less than baseline gf interval
> accounting for the golden frame.
> - Fix in calculation of normal_frames. As baseline gf
> interval includes the golden frame, the number of
> normal frames should be one less than baseline gf
> interval.
>
> Change-Id: I6c0cd0a39db23586fc390a6fba5d7aebc0dfce08
Change-Id: I522da652587ae7ca4177f6d4bb9f72abcff35637
Jingning Han [Fri, 24 May 2019 16:35:27 +0000 (16:35 +0000)]
Merge "Increase active best quality linearly"
Paul Wilkins [Fri, 24 May 2019 15:38:56 +0000 (15:38 +0000)]
Merge "Fix calculations in GF only group case"
Venkatarama Avadhani [Fri, 24 May 2019 05:22:16 +0000 (05:22 +0000)]
Merge "Exclude VP9 files from vpx_dsp.mk for VP8 build"
Jingning Han [Wed, 22 May 2019 16:42:54 +0000 (16:42 +0000)]
Merge "Clamp for min_frame_target"
Venkatarama NG. Avadhani [Wed, 8 May 2019 14:23:58 +0000 (19:53 +0530)]
Exclude VP9 files from vpx_dsp.mk for VP8 build
Change-Id: Ifab64a783c205cc79b841a3f77fb77b156b23b23
Jingning Han [Tue, 21 May 2019 23:47:24 +0000 (16:47 -0700)]
Clamp for min_frame_target
Apply the minimum frame size clamp for all applicable frames. This
avoids bit-rate undershooting issue as reported in
BUG=b/
133260125
Change-Id: I59ec028eee999ad5238602adf96465af7c4f4514
Deepa K G [Fri, 17 May 2019 10:35:06 +0000 (16:05 +0530)]
Increase the bits allocated to key frame
Based on the spatial complexity, increase the
bits allocated to key frame.
Change-Id: I4f96990a13bcc3bdb7a22d50e67e2bd622f1ff7b
Marco Paniconi [Tue, 14 May 2019 22:47:23 +0000 (15:47 -0700)]
vp8: Disallow copy flag behavior under forced refresh
Don't allow the setting of copy_buffer_to_arf when the
application/user sets the refresh/update flags. Add new flag
(ext_refresh_frame_flags_pending) to indicate user sets the flags.
Change-Id: I482098c0f2552b04885132a728629ab3e207f08b
Marco Paniconi [Fri, 17 May 2019 17:50:42 +0000 (10:50 -0700)]
vp9-rtc: Increase qp thresh for overshoot detection
For video mode (non-screen) in CBR real-time mode:
increase the qp thresh to trigger setting to active_worst
on scene changes. Avoid big overshoots in content with
scene changes.
Change-Id: I74721b07b0d7b742cbef468ece70cca7da0f89eb
Ravi Chaudhary [Mon, 22 Apr 2019 13:25:12 +0000 (18:55 +0530)]
Increase active best quality linearly
The ARF frames in last few gf intervals, would be
used as a reference by fewer ARF frames in the same
kf interval. Also, the ARF frames in the last GF
group would not be used as a reference in future.
Hence the active best quality for these ARF frames
is increased based on their temporal distance from
the next key frame.
Change-Id: Ice7eaa8a25384104b1d9cc021eec588c03053fc2
Deepa K G [Fri, 26 Apr 2019 10:09:13 +0000 (15:39 +0530)]
Fix calculations in GF only group case
- Fix the number of frames considered in calculation of
twopass active worst quality. For GF only group, frames
considered should be one less than baseline gf interval
accounting for the golden frame.
- Fix in calculation of normal_frames. As baseline gf
interval includes the golden frame, the number of
normal frames should be one less than baseline gf
interval.
Change-Id: I6c0cd0a39db23586fc390a6fba5d7aebc0dfce08
Deepa K G [Tue, 14 May 2019 08:40:21 +0000 (14:10 +0530)]
Fix section intra rating for first ARF interval
The section intra rating used for the frames in the
first ARF interval was based on entire key frame
interval. However, for subsequent ARF intervals it was
based on that ARF interval. This discrepancy is fixed.
Change-Id: I3df358861d720e536c9c6f15da1cbd78f2dfffbc
Johann Koenig [Wed, 15 May 2019 18:40:02 +0000 (18:40 +0000)]
Merge "Revert "disable row mt test""
Johann Koenig [Wed, 15 May 2019 17:06:22 +0000 (17:06 +0000)]
Revert "disable row mt test"
This reverts commit
6d6cc17dc852a216395611bf651e57c19c95b9c4.
Reason for revert:
This has not been reproduced on hardware. There is a strange
libc bug which may account for the behavior on arm because
the environment qemu is using is somewhat old. See discussion
on the webm bug.
To work around the failures in the nightly test the jenkins
job has been switched to use the hardfloat compiler and qemu
environment. Even though this is the same version, it has
not shown the hanging behavior.
Original change's description:
> disable row mt test
>
> deadlock is being investigated in attached bug.
>
> BUG=webm:1626
>
> Change-Id: Ia6d7020b8b1d274433aa89f36c9ed5b9facc5808
Bug: webm:1626
Change-Id: I104a82696a4c90bfbadfd39407c073adce73af0d
Deepa K G [Wed, 15 May 2019 04:26:02 +0000 (04:26 +0000)]
Merge "Increase the active best quality in CQ"
Jerome Jiang [Mon, 13 May 2019 18:29:55 +0000 (11:29 -0700)]
Reland "vp9: Enable ml based partition for speed>=8 low res."
Disable in high bitdepth build.
This reverts commit
152358da777d45613b386be3a116719b8b16bd6d.
Change-Id: I9996d0963915ed4db0fde80c6290d91b3ce63719
Paul Wilkins [Mon, 13 May 2019 08:08:37 +0000 (08:08 +0000)]
Merge "Fix update of mb_smooth_pct and mb_av_energy"
Jerome Jiang [Fri, 10 May 2019 23:15:04 +0000 (23:15 +0000)]
Merge "Revert "vp9: Enable ml based partition for speed>=8 low res.""
Johann Koenig [Fri, 10 May 2019 22:57:50 +0000 (22:57 +0000)]
Merge "disable row mt test"
Jerome Jiang [Fri, 10 May 2019 21:38:16 +0000 (21:38 +0000)]
Merge "Cast buffer offset to int64_t"
Jerome Jiang [Fri, 10 May 2019 21:29:12 +0000 (14:29 -0700)]
Revert "vp9: Enable ml based partition for speed>=8 low res."
This reverts commit
eed8d47769ddc78c277f8a45b12af4b65096b59a.
BUG=chromium:946409
Change-Id: Iaf9929de841445f63e93792d1fee06d9a1035ef4
Jingning Han [Fri, 10 May 2019 21:28:47 +0000 (21:28 +0000)]
Merge "Assign perceptual AQ mode as 5"
Jingning Han [Fri, 10 May 2019 20:25:32 +0000 (13:25 -0700)]
Assign perceptual AQ mode as 5
Change-Id: I8f301fab3bedcd71588c57ccd6e49dcb7042e220
Jerome Jiang [Fri, 10 May 2019 18:46:19 +0000 (11:46 -0700)]
Cast buffer offset to int64_t
To prevent integer overflow with extreme frame sizes.
Change-Id: Ib77f1c11f0264257d9e6c162f474d637592e7b09
Jerome Jiang [Fri, 10 May 2019 16:47:08 +0000 (09:47 -0700)]
Reland "vp9-rtc: tx_size selection for intra mode in nonrd"
Reland this change since tsan failure is fixed.
Change-Id: I20e3d3d23e34befabb43a36d491d27dfc2a908b6
Jerome Jiang [Fri, 10 May 2019 04:04:11 +0000 (21:04 -0700)]
Fix tsan failure in webrtc test.
plane block size is used when computing model rd for uv.
However, it iterates thru sub-blocks based on tx size on uv planes
and plane block size could be bigger than that, which leads to reading
beyond tile boundary when the block is on it.
BUG=b/
131414589
Change-Id: I362091484b1325b89d2175039323b235a06ebffc
Johann [Thu, 9 May 2019 18:57:30 +0000 (11:57 -0700)]
disable row mt test
deadlock is being investigated in attached bug.
BUG=webm:1626
Change-Id: Ia6d7020b8b1d274433aa89f36c9ed5b9facc5808
Jingning Han [Wed, 8 May 2019 21:29:07 +0000 (21:29 +0000)]
Merge "Fix key frame detection"
Jingning Han [Wed, 8 May 2019 20:16:10 +0000 (13:16 -0700)]
Fix key frame detection
This solves the regression issue seen in certain animation clips.
BUG=b/
132108583
Change-Id: Ib28413c95160a5f15fbcf9ea6a322fd4f69a57ce
Johann Koenig [Wed, 8 May 2019 16:21:24 +0000 (16:21 +0000)]
Merge "android: clarify RTCD usage"
Paul Wilkins [Wed, 8 May 2019 10:55:25 +0000 (10:55 +0000)]
Merge "Avoid two GF only groups just before a kf"
Jingning Han [Tue, 7 May 2019 05:29:01 +0000 (05:29 +0000)]
Merge "Cap arf boost in perceptual quality mode"
Jingning Han [Tue, 7 May 2019 05:28:43 +0000 (05:28 +0000)]
Merge "Increase min arf boost from 240 to 250"
Jerome Jiang [Tue, 7 May 2019 04:01:44 +0000 (04:01 +0000)]
Merge "vp8: Remove duplicated code in datarate tests."
Jerome Jiang [Fri, 3 May 2019 22:07:58 +0000 (15:07 -0700)]
vp8: Remove duplicated code in datarate tests.
Duplicated code between *Large and other tests.
Change-Id: I0cea7472c3520175339bc921dfd8a090b5d5484d
Angie Chiang [Thu, 2 May 2019 21:56:56 +0000 (14:56 -0700)]
Add mismatch_debug tool
Change-Id: I045b4cf625d428109688303ced5433d824df2790
Jerome Jiang [Mon, 6 May 2019 22:14:58 +0000 (22:14 +0000)]
Merge "Revert "vp9-rtc: tx_size selection for intra mode in nonrd""
Jingning Han [Mon, 6 May 2019 21:09:18 +0000 (14:09 -0700)]
Cap arf boost in perceptual quality mode
When the perceptual AQ mode is enabled, cap the ARF boost to 2.5x
of the regular frame. This allows more consistent frame quality
across consecutive frames and sufficient bit rate allocation at
frame level for AQ mode.
Change-Id: I10f5e2860a3e4b412efe25cca635405bae293ebf
Jingning Han [Mon, 6 May 2019 19:56:57 +0000 (12:56 -0700)]
Increase min arf boost from 240 to 250
This imposes nearly zero change in low/mid/hd res test sets.
Change-Id: I121716b96263f2a382d35e7ff05ed8b72e5e6bc7
Johann Koenig [Mon, 6 May 2019 20:38:04 +0000 (20:38 +0000)]
Merge "android: do not attempt standalone builds"
Harish Mahendrakar [Mon, 6 May 2019 19:49:56 +0000 (19:49 +0000)]
Merge "Exclude VP9 assemblies from VP8 builds"
Johann [Mon, 6 May 2019 19:48:50 +0000 (12:48 -0700)]
android: clarify RTCD usage
Note that when using --disable-runtime-cpu-detect the developer
must keep in mind what devices the library will be run on.
BUG=webm:1623
Change-Id: I0359e226bb678f8e5145bb30cd1cefc7e30c6c79
Jerome Jiang [Mon, 6 May 2019 19:29:02 +0000 (12:29 -0700)]
Revert "vp9-rtc: tx_size selection for intra mode in nonrd"
This reverts commit
cdd40d1cd042d8c139b3426f311b8b5722d696bb.
Cause tsan failure in webrtc tests.
BUG=b/
131414589
Change-Id: I04f98153bc1f9d013d3d1eb8d06df312fe12f8b4
Johann [Thu, 2 May 2019 18:40:52 +0000 (11:40 -0700)]
android: do not attempt standalone builds
arm builds require too many tweaks to keep up with changes
to the ndk. Recommend ndk-build instead.
Update documentation and drop --sdk-path references. If
--enable-external-build is used instead we do not need the compiler
path.
BUG=webm:1622
Change-Id: Id024345afd7af988321f8f97ebab19c425cb0493
Ravi Chaudhary [Mon, 4 Mar 2019 05:27:17 +0000 (10:57 +0530)]
Fix update of mb_smooth_pct and mb_av_energy
Values of mb_smooth_pct and mb_av_energy have been updated
correctly in vp9_rc_get_second_pass_params for higher layer
ARF frames.
Change-Id: Ic176e393eb8cc5f418235fee9accee84e9809607
Venkatarama NG. Avadhani [Thu, 2 May 2019 04:37:54 +0000 (10:07 +0530)]
Exclude VP9 assemblies from VP8 builds
Add a macro to to exclude VP9 specific assembly files from build if VP9
is not configured. This would otherwise cause a linking error for VP8
only builds.
BUG=webm:1625
Change-Id: I6d892b7c2837a2574538d18b776fd2b6d706da96
Jerome Jiang [Fri, 3 May 2019 18:13:46 +0000 (18:13 +0000)]
Merge "vp8: clamp uv mv after calculation."
Deepa K G [Mon, 29 Apr 2019 13:09:14 +0000 (18:39 +0530)]
Avoid two GF only groups just before a kf
Trap the case where we end up with two short GF only groups just
before a key frame. For example, if the KF is 22 frames away
we are better doing one ARF group of size 16 followed by a GF
only group of 6 than two GF only groups of size 11 (when
min_gf_interval is 12).
Change-Id: Ie598a8a21c6e104cbe381b4792e77fd92d047725
Jerome Jiang [Wed, 1 May 2019 18:51:26 +0000 (11:51 -0700)]
vp8: clamp uv mv after calculation.
BUG=oss-fuzz:14478
Change-Id: Ia978a1e7829bf486681385cd715ed0b50fe3b072
Johann Koenig [Thu, 2 May 2019 19:04:47 +0000 (19:04 +0000)]
Merge "vp8: quiet conversion warnings when packing bits"
Angie Chiang [Thu, 2 May 2019 18:44:13 +0000 (18:44 +0000)]
Merge "Fix the use of uninitialized value in qsort"
James Zern [Wed, 1 May 2019 19:51:41 +0000 (19:51 +0000)]
Merge "make vpx_debug_util.c inclusion conditional"
Johann [Wed, 1 May 2019 19:10:53 +0000 (12:10 -0700)]
vp8: quiet conversion warnings when packing bits
Mask the values to show that we only want to store 1 byte. Switch
to lowercase ff since it's more prevalent in the file.
BUG=webm:1615
Change-Id: Ia8ede79cb3a4a39c868198ae207d606e30cfb1cb
Jingning Han [Tue, 30 Apr 2019 18:54:07 +0000 (11:54 -0700)]
Rework the wiener variance buffer
Support the potential frame scaling use case. The operation flow
now allows the codec to allocate the memory buffer only when
perceptual AQ mode is enabled.
Change-Id: I7529e63131276dbe3a29f910d3a227f20dbc94a2
Jingning Han [Tue, 30 Apr 2019 17:58:03 +0000 (10:58 -0700)]
Deprecate stack_rank_buffer usage
This large buffer is no longer needed.
Change-Id: I9f2b3b28663d299649208f6172bba136103342ad
Jingning Han [Tue, 30 Apr 2019 17:54:17 +0000 (10:54 -0700)]
Refactor perceptual aq control
Move the activation control to vpxenc interface using aq-mode.
Change-Id: Iae406d4f7e74bdc7bfd3b149f0811093454f879e
Jingning Han [Wed, 1 May 2019 03:37:04 +0000 (03:37 +0000)]
Merge "Add PERCEPTUAL_AQ tag"
James Zern [Wed, 1 May 2019 00:42:46 +0000 (17:42 -0700)]
make vpx_debug_util.c inclusion conditional
on CONFIG_BITSTREAM_DEBUG. this avoids an object file containing no
symbols which may cause warnings on some platforms.
Change-Id: I02af97d6970de949466c29f50d272733d97ee8d2
James Zern [Tue, 30 Apr 2019 22:09:39 +0000 (22:09 +0000)]
Merge "vp8cx.h,vpxenc: add note about alt ref ranges"
Jingning Han [Tue, 30 Apr 2019 17:36:54 +0000 (10:36 -0700)]
Fix the use of uninitialized value in qsort
Search within the effective transform coefficient window.
Change-Id: If432eaab5ffca1cdfe57ee23052bf5dc60a2f893
Johann [Tue, 30 Apr 2019 19:26:18 +0000 (12:26 -0700)]
cast ambiguous _mm_set1_epiNN() constants
clang 7 integer sanitizer warns on unsigned->signed conversions when
the highest bit is 1.
BUG=webm:1615
Change-Id: I6381efaff9233254b40cb78f7bcf87090e0ad353
Johann Koenig [Tue, 30 Apr 2019 16:46:59 +0000 (16:46 +0000)]
Merge "vp8: quiet conversion warning when packing sizes"