drm/amdgpu: allow zero as vram limit

This allows testing the driver without any VRAM.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: cleanup visible vram size handling

Centralize the limit handling and validation in one place instead
of spreading that around in different hw generations.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: rename vram_scratch into mem_scratch

Rename vram_scratch into mem_scratch and allow allocating it into GTT as
well.

The only problem with that is that we won't have a default page for the
system aperture any more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use VRAM|GTT for a bunch of kernel allocations

Technically all of those can use GTT as well, no need to force things
into VRAM.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable VCN DPG for GC IP v11.0.4

Enable VCN Dynamic Power Gating control for GC IP v11.0.4.

Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: adjust the sequence to check soft reset

1.Drop soft reset check when do should recover gpu check.
  (As it will skip gpu reset operation if some ip is hang but
   not support soft reset)
2.Check soft reset status before do soft reset when pre asic reset.
  a. If check soft reset return true, it means: some ip is hang and
     it also support soft reset, will try soft reset first.
  b. If check soft reset return false, it means:
       I.  All the ip are not hang, will skip gpu reset.
       II. Some ip is hang but not support soft reset, will skip soft
           reset and retry with full reset later.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix kernel warning during topology setup

This patch fixes the following kernel warning seen during
driver load by correctly initializing the p2plink attr before
creating the sysfs file:

[  +0.002865] ------------[ cut here ]------------
[  +0.002327] kobject: '(null)' (0000000056260cfb): is not initialized, yet kobject_put() is being called.
[  +0.004780] WARNING: CPU: 32 PID: 1006 at lib/kobject.c:718 kobject_put+0xaa/0x1c0
[  +0.001361] Call Trace:
[  +0.001234]  <TASK>
[  +0.001067]  kfd_remove_sysfs_node_entry+0x24a/0x2d0 [amdgpu]
[  +0.003147]  kfd_topology_update_sysfs+0x3d/0x750 [amdgpu]
[  +0.002890]  kfd_topology_add_device+0xbd7/0xc70 [amdgpu]
[  +0.002844]  ? lock_release+0x13c/0x2e0
[  +0.001936]  ? smu_cmn_send_smc_msg_with_param+0x1e8/0x2d0 [amdgpu]
[  +0.003313]  ? amdgpu_dpm_get_mclk+0x54/0x60 [amdgpu]
[  +0.002703]  kgd2kfd_device_init.cold+0x39f/0x4ed [amdgpu]
[  +0.002930]  amdgpu_amdkfd_device_init+0x13d/0x1f0 [amdgpu]
[  +0.002944]  amdgpu_device_init.cold+0x1464/0x17b4 [amdgpu]
[  +0.002970]  ? pci_bus_read_config_word+0x43/0x80
[  +0.002380]  amdgpu_driver_load_kms+0x15/0x100 [amdgpu]
[  +0.002744]  amdgpu_pci_probe+0x147/0x370 [amdgpu]
[  +0.002522]  local_pci_probe+0x40/0x80
[  +0.001896]  work_for_cpu_fn+0x10/0x20
[  +0.001892]  process_one_work+0x26e/0x5a0
[  +0.002029]  worker_thread+0x1fd/0x3e0
[  +0.001890]  ? process_one_work+0x5a0/0x5a0
[  +0.002115]  kthread+0xea/0x110
[  +0.001618]  ? kthread_complete_and_exit+0x20/0x20
[  +0.002422]  ret_from_fork+0x1f/0x30
[  +0.001808]  </TASK>
[  +0.001103] irq event stamp: 59837
[  +0.001718] hardirqs last  enabled at (59849): [<ffffffffb30fab12>] __up_console_sem+0x52/0x60
[  +0.004414] hardirqs last disabled at (59860): [<ffffffffb30faaf7>] __up_console_sem+0x37/0x60
[  +0.004414] softirqs last  enabled at (59654): [<ffffffffb307d9c7>] irq_exit_rcu+0xd7/0x130
[  +0.004205] softirqs last disabled at (59649): [<ffffffffb307d9c7>] irq_exit_rcu+0xd7/0x130
[  +0.004203] ---[ end trace 0000000000000000 ]---

Fixes: 0f28cca87e9a ("drm/amdkfd: Extend KFD device topology to surface peer-to-peer links")
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: skip mes self test after s0i3 resume for MES IP v11.0

MES is part of gfxoff and MES suspend and resume are skipped for S0i3.
But the mes_self_test call path is still in the amdgpu_device_ip_late_init.
it's should also be skipped for s0ix as no hardware re-initialization
happened.

Besides, mes_self_test will free the BO that triggers a lot of warning
messages while in the suspend state.

[   81.656085] WARNING: CPU: 2 PID: 1550 at drivers/gpu/drm/amd/amdgpu/amdgpu_object.c:425 amdgpu_bo_free_kernel+0xfc/0x110 [amdgpu]
[   81.679435] Call Trace:
[   81.679726]  <TASK>
[   81.679981]  amdgpu_mes_remove_hw_queue+0x17a/0x230 [amdgpu]
[   81.680857]  amdgpu_mes_self_test+0x390/0x430 [amdgpu]
[   81.681665]  mes_v11_0_late_init+0x37/0x50 [amdgpu]
[   81.682423]  amdgpu_device_ip_late_init+0x53/0x280 [amdgpu]
[   81.683257]  amdgpu_device_resume+0xae/0x2a0 [amdgpu]
[   81.684043]  amdgpu_pmops_resume+0x37/0x70 [amdgpu]
[   81.684818]  pci_pm_resume+0x5c/0xa0
[   81.685247]  ? pci_pm_thaw+0x90/0x90
[   81.685658]  dpm_run_callback+0x4e/0x160
[   81.686110]  device_resume+0xad/0x210
[   81.686529]  async_resume+0x1e/0x40
[   81.686931]  async_run_entry_fn+0x33/0x120
[   81.687405]  process_one_work+0x21d/0x3f0
[   81.687869]  worker_thread+0x4a/0x3c0
[   81.688293]  ? process_one_work+0x3f0/0x3f0
[   81.688777]  kthread+0xff/0x130
[   81.689157]  ? kthread_complete_and_exit+0x20/0x20
[   81.689707]  ret_from_fork+0x22/0x30
[   81.690118]  </TASK>
[   81.690380] ---[ end trace 0000000000000000 ]---

v2: make the comment clean and use adev->in_s0ix instead of
adev->suspend

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix some coding style issues

Fix the following checkpatch checks in amdgpu_dm.c

CHECK: Prefer kernel type 'u8' over 'uint8_t'
CHECK: Prefer kernel type 'u32' over 'uint32_t'
CHECK: Prefer kernel type 'u64' over 'uint64_t'
CHECK: Prefer kernel type 's32' over 'int32_t'

Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: correct the fan speed retrieving in PWM for some SMU13 asics

For SMU 13.0.0 and 13.0.7, the output from PMFW is in percent. Driver
need to convert that into correct PMW(255) based.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: save restore hdcp state when display is unplugged from mst hub

[Why]
connector hdcp properties are lost after display is
unplgged from mst hub. connector is destroyed with
dm_dp_mst_connector_destroy. when display is plugged
back, hdcp is not desired and it wouldnt be enabled.

[How]
save hdcp properties into hdcp_work within
amdgpu_dm_atomic_commit_tail. If the same display is
plugged back with same display index, its hdcp
properties will be retrieved from hdcp_work within
dm_dp_mst_get_modes.

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: bump SMU13.0.0 driver_if header to version 0x34

To fit the latest PMFW and suppress the warning emerged on driver loading.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add support for WINDOW3D profile mode on SMU13.0.0

Add the support for WINDOW3D profile mode as for other profile modes.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: skip MES for S0ix as well since it's part of GFX

It's also part of gfxoff.

Cc: stable@vger.kernel.org # 6.0, 6.1
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu: force exit gfxoff on sdma resume for rmb s0ix"

This reverts commit e5d59cfa330523e47cba62a496864acc3948fc27.

This is no longer needed since we no longer suspend SDMA during
S0ix.

Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu: disallow gfxoff until GC IP blocks complete s2idle resume"

This reverts commit f543d28687480fad06b708bc6e0b0b6ec953b078.

This is no longer needed since we no longer touch SDMA 5.x for s0i3.

Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: for S0ix, skip SDMA 5.x+ suspend/resume

SDMA 5.x is part of the GFX block so it's controlled via
GFXOFF.  Skip suspend as it should be handled the same
as GFX.

v2: drop SDMA 4.x.  That requires special handling.

Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: don't mess with SDMA clock or powergating in S0ix

It's handled by GFXOFF for SDMA 5.x and SMU saves the state on
SDMA 4.x.

Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gmc11: don't touch gfxhub registers during S0ix

gfxhub registers are part of gfx IP and should not need to be
changed.  Doing so without disabling gfxoff can hang the gfx IP.

v2: add comments explaining why we can skip the interrupt
    control for S0i3

Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gmc10: don't touch gfxhub registers during S0ix

gfxhub registers are part of gfx IP and should not need to be
changed.  Doing so without disabling gfxoff can hang the gfx IP.

v2: add comments explaining why we can skip the interrupt
    control for S0i3

Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gmc9: don't touch gfxhub registers during S0ix

gfxhub registers are part of gfx IP and should not need to be
changed.  Doing so without disabling gfxoff can hang the gfx IP.

v2: add comments explaining why we can skip the interrupt
    control for S0i3

Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: avoid large variable on kernel stack

The activity_monitor_external[] array is too big to fit on the
kernel stack, resulting in this warning with clang:

drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0_7_ppt.c:1438:12: error: stack frame size (1040) exceeds limit (1024) in 'smu_v13_0_7_get_power_profile_mode' [-Werror,-Wframe-larger-than]

Use dynamic allocation instead. It should also be possible to
have single element here instead of the array, but this seems
easier.

v2: fix up argument to sizeof() (Alex)

Fixes: 334682ae8151 ("drm/amd/pm: enable workload type change on smu_v13_0_7")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix duplicate assignments

The .set_odm_combine callback pointer was added twice, causing
a harmless -Wextra warning:

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_optc.c:258:36: error: initialized field overwritten [-Werror=override-init]
  258 |                 .set_odm_combine = optc314_set_odm_combine,
      |                                    ^~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_optc.c:258:36: note: (near initialization for 'dcn314_tg_funcs.set_odm_combine')

Fixes: 5ade1b951dec ("drm/amd/display: Add OTG/ODM functions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix double release compute pasid

If kfd_process_device_init_vm returns failure after vm is converted to
compute vm and vm->pasid set to compute pasid, KFD will not take
pdd->drm_file reference. As a result, drm close file handler maybe
called to release the compute pasid before KFD process destroy worker to
release the same pasid and set vm->pasid to zero, this generates below
WARNING backtrace and NULL pointer access.

Add helper amdgpu_amdkfd_gpuvm_set_vm_pasid and call it at the last step
of kfd_process_device_init_vm, to ensure vm pasid is the original pasid
if acquiring vm failed or is the compute pasid with pdd->drm_file
reference taken to avoid double release same pasid.

 amdgpu: Failed to create process VM object
 ida_free called for id=32770 which is not allocated.
 WARNING: CPU: 57 PID: 72542 at ../lib/idr.c:522 ida_free+0x96/0x140
 RIP: 0010:ida_free+0x96/0x140
 Call Trace:
  amdgpu_pasid_free_delayed+0xe1/0x2a0 [amdgpu]
  amdgpu_driver_postclose_kms+0x2d8/0x340 [amdgpu]
  drm_file_free.part.13+0x216/0x270 [drm]
  drm_close_helper.isra.14+0x60/0x70 [drm]
  drm_release+0x6e/0xf0 [drm]
  __fput+0xcc/0x280
  ____fput+0xe/0x20
  task_work_run+0x96/0xc0
  do_exit+0x3d0/0xc10

 BUG: kernel NULL pointer dereference, address: 0000000000000000
 RIP: 0010:ida_free+0x76/0x140
 Call Trace:
  amdgpu_pasid_free_delayed+0xe1/0x2a0 [amdgpu]
  amdgpu_driver_postclose_kms+0x2d8/0x340 [amdgpu]
  drm_file_free.part.13+0x216/0x270 [drm]
  drm_close_helper.isra.14+0x60/0x70 [drm]
  drm_release+0x6e/0xf0 [drm]
  __fput+0xcc/0x280
  ____fput+0xe/0x20
  task_work_run+0x96/0xc0
  do_exit+0x3d0/0xc10

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix kfd_process_device_init_vm error handling

Should only destroy the ib_mem and let process cleanup worker to free
the outstanding BOs. Reset the pointer in pdd->qpd structure, to avoid
NULL pointer access in process destroy worker.

 BUG: kernel NULL pointer dereference, address: 0000000000000010
 Call Trace:
  amdgpu_amdkfd_gpuvm_unmap_gtt_bo_from_kernel+0x46/0xb0 [amdgpu]
  kfd_process_device_destroy_cwsr_dgpu+0x40/0x70 [amdgpu]
  kfd_process_destroy_pdds+0x71/0x190 [amdgpu]
  kfd_process_wq_release+0x2a2/0x3b0 [amdgpu]
  process_one_work+0x2a1/0x600
  worker_thread+0x39/0x3d0

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add poison mode query for df v4_3

Add poison mode query support on df v4_3.

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add df v4_3 headers

Add df v4_3 header files.

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: bump minor version number for DEV_INFO and SENSOR IOCTLs update

Update AMDGPU_INFO_DEV_INFO IOCTL for minimum engine and memory clock.
And update AMDGPU_INFO_SENSOR IOCTL for PEAK_PSTATE engine and memory clock.
User applications can better utilize these IOCTLs to get needed informations.

Increase the minor version number to indicate that the new flags are
available.

Proposed mesa patch:
https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/278

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: expose the minimum shader/memory clock frequency

Otherwise, some UMD tools will treate them as 0 at default while
actually they are not.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: expose peak profiling mode shader/memory clocks

Expose those informations to UMD who need them as for standard
profiling mode.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fulfill powerplay peak profiling mode shader/memory clock settings

Enable peak profiling mode shader/memory clock reporting for powerplay
framework.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fulfill swsmu peak profiling mode shader/memory clock settings

Enable peak profiling mode shader/memory clocks reporting for swsmu
framework.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: drop unused SMU v13 API

The API is not in use. And it's unlikely to be used in
the future either.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/display: Add missing Adaptive Sync DPCD definitions

The missing DPCD definitions from DP2.0 spec is as follows:

DOWNSPREAD_CTRL (107h):
FIXED_VTOTAL_AS_SDP_EN_IN_PR_ACTIVE (bit 6)
For sink devices that support Adaptive-Sync operation
and Panel Replay

DPRX_FEATURE_ENUMERATION_LIST_CONT_1 (2214h):
ADAPTIVE_SYNC_SDP_SUPPORTED (bit 0)
Bit to check sink device has Adaptive-Sync capability
AS_SDP_FIRST_HALF_LINE_OR_3840_PIXEL_CYCLE_WINDOW_NOT_SUPPORTED (bit 1)
A sink device that clears this bit will generate VSync pulse
leading edge of the HDMI output on the line count at which
Adaptive-Sync SDP is received as long as source device transmits
Adaptive-Sync SDP either in first line or first 3840 pixel cycles
of the line whichever occurs first.
VSC_EXT_SDP_FRAMEWORK_VERSION_1_SUPPORTED (bit 4)
Bit to check sink device has SDP framework version 1 capability

Signed-off-by: Sung Joon Kim <Sungjoon.Kim@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: Replace 1-element arrays with flexible-array members

One-element arrays are deprecated, and we are replacing them with
flexible array members instead. So, replace one-element array with
flexible-array member in structs _ATOM_DISPLAY_OBJECT_PATH,
_ATOM_DISPLAY_OBJECT_PATH_TABLE, _ATOM_OBJECT_TABLE, GOP_VBIOS_CONTENT
_ATOM_GPIO_VOLTAGE_OBJECT_V3 and refactor the rest of the code accordingly.

It's worth mentioning that doing a build before/after this patch
results in no binary output differences.

This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/239
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836
Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: define RAS query poison mode function

1. no need to query poison mode on SRIOV guest side, host can handle it.
2. define the function to simplify code.

v2: rename amdgpu_ras_poison_mode_query to amdgpu_ras_query_poison_mode.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update VCN/JPEG RAS setting

Support VCN/JPEG RAS in both bare metal and SRIOV environment.

v2: update commit description.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: skip RAS error injection in SRIOV

Injection on guest is not allowed.

v2: return directly in SRIOV environment.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add VCN poison consumption handler for SRIOV

Inform host and let host handle consumption interrupt.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add RAS poison consumption handler for SRIOV

Send message to PF if VF receives RAS poison consumption interrupt.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add RAS poison consumption handler for NV SRIOV

Send handling request to host.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add RAS poison consumption handler for AI SRIOV

Send message to host and host will handle it.

v2: split the patch into two parts, one is for mxgpu ai and another one
is for common poison consumption handler.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Block FPO / SubVP (DRR) on HDMI VRR configs

[Description]
- Current policy does not support HDMI VRR by default, so we
  cannot enable FPO / SubVP (DRR) cases

Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.216

This version brings along following fixes:

-Fix array index out of bound error
-Speed up DML fast vadlaite
-Implement multiple secure display
-MST HDCP for multiple display
-Add DPIA notification
-Add support for three new square pattern variant

Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Demote Error Level When ODM Transition Supported

[Why && How]
On dcn32, HW supports odm transition in fast update. Hence this
error message is considered false positive. Downgrade the error level
to avoid catching unnecessary attention.

Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add support for three new square pattern variants from DP2.1 specs

[why]
DP2.1 specs has brought 3 new variants of sqaure patterns with different
pre-shoot and de-emphasis equalization requirements. The commit adds
logic to identify these variants and apply corresponding eqaulization
requirements into hardware lane settings.

Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: run subvp validation with supported vlevel

[WHY]
Subvp portion validation currently assumes that if vlevel provided does not
support pstate, then none will, and so subvp is not used.

[HOW]
After get vlevel, use lowest vlevel that supports pstate if it
exists, and use that for subvp validation.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Check for PSR in no memory request case

[Why]
When we have a PSR display, we will not be requesting data from memory anymore.
So we report back true for no memory request case.

[How]
Check for PSR by checking PSR version in link settings

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clear link res when merging a pipe split

[Description]
- When merging a pipe that was previously pipe split, we need
  to also clear the link resources or the next stream/plane that
  uses the pipe may have an incorrect link resource state

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DPIA NOTIFICATION logic

[WHY]
Adding the new DPIA NOTIFY packets from DMUB
As per the design with Cruise to account for
250ms response delay otherwise

[HOW]
Added th DPIA NOTIFY logic as per DMUB logic

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clear MST topology if it fails to resume

[Why]
In case of failure to resume MST topology after suspend, an emtpty
mst tree prevents further mst hub detection on the same connector.
That causes the issue with MST hub hotplug after it's been unplug in
suspend.

[How]
Stop topology manager on the connector after detecting DM_MST failure.

Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: use encoder type independent hwss instead of accessing enc directly

[why]
in dc_link_dp there still exist a few places where we call dio encoders
without checking current enabled encoder type.
The change is to make these places to call hwss equivalent functions so
it won't mistakenly program a wrong type encoder.

Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Revert Scaler HCBlank issue workaround

Workaround no longer needed.

Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix potential null-deref in dm_resume

[Why]
Fixing smatch error:
dm_resume() error: we previously assumed 'aconnector->dc_link' could be null

[How]
Check if dc_link null at the beginning of the loop,
so further checks can be dropped.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Revert Reduce delay when sink device not able to ACK 00340h write

[WHY]
It causes regression AMD source will not write DPCD 340.

Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Block subvp if center timing is in use

[Description]
- FW scheduling algorithm doesn't take into account of it's
  a center timing
- This affects where the subvp mclk switch can be scheduled
  (prevents HUBP vline interrupt from coming in if scheduled
  incorrectly)
- Block subvp center timing cases for now

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reduce expected sdp bandwidth for dcn321

[Description]
Modify soc BB to reduce expected sdp bandwidth and align with measurements to
fix underflow issues.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add debug bit to disable unbounded requesting

[Description]
Add debug bit to disable unbounded requesting.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Speed up DML fast_validate path

[Why]
Iterating over every voltage state when we need to validate thousands of
configurations all at once (i.e. display hotplug) can take a significant
amount of time.

[How]
Check just the highest voltage state when fast_validate is true to
verify whether the configuration can work at all, then do a proper
validation including all voltage states later when fast_validate is false.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix when disabling secure_display

[Why]
Fix problems when we disable secure_display.

[How]
- Reset secure display context after disabled
- A secure_display_context is dedicate to a crtc, so we set the crtc for
it when we create the context.

Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: correct static_screen_event_mask"

This reverts commit c800d9ff8cdec57778ab21f4d933a25f41f44738.

[why]
revert for now because this change exposed other issue.

Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Implement multiple secure display

[Why]
Current secure display only work with single display, now make it
work with multiple displays.

[How]
Create secure_display_context for each crtc instance to store its
own Region of Interest (ROI) information.

v2: squash in warning fix (Alex)

Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: update SMU13.0.0 reported maximum shader clock

Update the reported maximum shader clock to the value which can
be guarded to be achieved on all cards. This is to align with
Window setting.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

drm/amd/pm: correct SMU13.0.0 pstate profiling clock settings

Correct the pstate standard/peak profiling mode clock settings
for SMU13.0.0.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

drm/amd/pm: enable GPO dynamic control support for SMU13.0.7

To better support UMD pstate profilings, the GPO feature needs
to be switched on/off accordingly.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

drm/amd/pm: enable GPO dynamic control support for SMU13.0.0

To better support UMD pstate profilings, the GPO feature needs
to be switched on/off accordingly.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

drm/amdgpu: revert "generally allow over-commit during BO allocation"

This reverts commit f9d00a4a8dc8fff951c97b3213f90d6bc7a72175.

This causes problem for KFD because when we overcommit we accidentially
bind the BO to GTT for moving it into VRAM. We also need to make sure
that this is done only as fallback after trying to evict first.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove unnecessary domain argument

Remove the "domain" argument to amdgpu_bo_create_kernel_at() since this
function takes an "offset" argument which is the offset off of VRAM, and as
such allocation always takes place in VRAM. Thus, the "domain" argument is
unnecessary.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: AMD Graphics <amd-gfx@lists.freedesktop.org>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix size validation for non-exclusive domains (v4)

Fix amdgpu_bo_validate_size() to check whether the TTM domain manager for the
requested memory exists, else we get a kernel oops when dereferencing "man".

v2: Make the patch standalone, i.e. not dependent on local patches.
v3: Preserve old behaviour and just check that the manager pointer is not
    NULL.
v4: Complain if GTT domain requested and it is uninitialized--most likely a
    bug.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: AMD Graphics <amd-gfx@lists.freedesktop.org>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Check if fru_addr is not NULL (v2)

Always check if fru_addr is not NULL. This commit also fixes a "smatch"
warning.

v2: Add a Fixes tag.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Dan Carpenter <error27@gmail.com>
Cc: kernel test robot <lkp@intel.com>
Cc: AMD Graphics <amd-gfx@lists.freedesktop.org>
Fixes: afbe5d1e4bd7c7 ("drm/amdgpu: Bug-fix: Reading I2C FRU data on newer ASICs")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: rework reserved VMID handling

Instead of reserving a VMID for a single process allow that many
processes use the reserved ID. This allows for proper isolation
between the processes.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: stop waiting for the VM during unreserve

This is completely pointless since the VMID always stays allocated until
the VM is idle.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: cleanup SPM support a bit

This should probably not access job->vm and also emit the SPM switch
under the conditional execute.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix GDS/GWS/OA switch handling

Bas pointed out that this isn't working as expected and could cause
crashes. Fix the handling by storing the marker that a switch is needed
inside the job instead.

Reported-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add missing SMU13.0.7 mm_dpm feature mapping

Without this, the pp_dpm_vclk and pp_dpm_dclk outputs are not with
correct data.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

drm/amd/pm: add missing SMU13.0.0 mm_dpm feature mapping

Without this, the pp_dpm_vclk and pp_dpm_dclk outputs are not with
correct data.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

drm/amdgpu: Add notifier lock for KFD userptrs

Add a per-process MMU notifier lock for processing notifiers from
userptrs. Use that lock to properly synchronize page table updates with
MMU notifiers.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Xiaogang Chen<Xiaogang.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN314 display SG Support

Add display SG support for DCN 3.1.4.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu: WARN when freeing kernel memory during suspend

When buffers are freed during suspend there is no guarantee that
they can be re-allocated during resume.

The PSP subsystem seems to be quite buggy regarding this, so add
a WARN_ON() to point out those bugs.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexdeucher@amd.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fixx NULL pointer deref in gmc_v9_0_get_vm_pte

We not only need to make sure that we have a BO, but also that the BO
has some backing store.

Fixes: d1a372af1c3d ("drm/amdgpu: Set MTYPE in PTE based on BO flags")
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add an extra evict_resource call during device_suspend.

- evict_resource is taking too long causing sriov full access mode timeout.
  So, add an extra evict_resource in the beginning as an early evict.

Signed-off-by: Shikang Fan <shikang.fan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: handle polaris10/11 overlap asics (v2)

Some special polaris 10 chips overlap with the polaris11
DID range.  Handle this properly in the driver.

v2: use local flags for other function calls.

Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu: make display pinning more flexible (v2)

Only apply the static threshold for Stoney and Carrizo.
This hardware has certain requirements that don't allow
mixing of GTT and VRAM.  Newer asics do not have these
requirements so we should be able to be more flexible
with where buffers end up.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2270
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2291
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2255
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/display: Fix spelling mistake: "dram_clk_chanage" -> "dram_clk_change"

There is a spelling mistake in the struct field dram_clk_chanage. Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'amd-drm-next-6.2-2022-12-07' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.2-2022-12-07:

amdgpu:
- DSC fixes for DCN 2.1
- HDMI PCON fixes
- PSR fixes
- DC DML fixes
- Properly throttle on BO allocation
- GFX 11.0.4 fixes
- MMHUB fix
- Make some functions static

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221207232439.5908-1-alexander.deucher@amd.com

Merge tag 'amd-drm-next-6.2-2022-12-02' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.2-2022-12-02:

amdgpu:
- Fix CPU stalls when allocating large amounts of system memory
- SR-IOV fixes
- BACO fixes
- Enable GC 11.0.4
- Enable PSP 13.0.11
- Enable SMU 13.0.11
- Enable NBIO 7.7.1
- Fix reported VCN capabilities for RDNA2
- Misc cleanups
- PCI ref count fixes
- DCN DPIA fixes
- DCN 3.2.x fixes
- Documentation updates
- GC 11.x fixes
- VCN RAS fixes
- APU fix for passthrough
- PSR fixes
- GFX preemption support for gfx9
- SDMA fix for S0ix

amdkfd:
- Enable KFD support for GC 11.0.4
- Misc cleanups
- Fix memory leak

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221202160659.5987-1-alexander.deucher@amd.com

Merge tag 'drm-misc-next-fixes-2022-12-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Some deferred-io and damage worker reworks revert and make a fb function
static

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221208084040.yw4zavsjd25qsltf@houat

Merge tag 'drm-intel-next-fixes-2022-12-01' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Multi-cast register fix (Matt)
- Fix workarounds on gen2-3 (Tvrtko)
- Bigjoiner fix (Ville)
- Make Guc default_list a const data (Jani)
- Acquire forcewake before uncore read (Umesh)
- Selftest fix (Umesh)
- HuC related fixes (Daniele)
- Fix some incorrect return values (Janusz)
- Fix a memory leak in bios related code (Xia)
- Fix VBT send packet port selection (Mikko)
- DG2's DMC fix bump for Register noclaims and few restore (Gustavo)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y4jZBRw9KvlKgkr6@intel.com

drm/amdgpu: fix mmhub register base coding error

fix MMHUB register base coding error.

Fixes: ec6837591f992 ("drm/amdgpu/gmc10: program the smallK fragment size")

Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu: add tmz support for GC IP v11.0.4

Add tmz support for GC 11.0.4.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable GFX Clock Gating control for GC IP v11.0.4

Enable GFX IP v11.0.4 CG gate/ungate control.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable GFX Power Gating for GC IP v11.0.4

Enable GFX Power Gating control for GC IP v11.0.4.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable GFX IP v11.0.4 CG support

Add CG support for GFX/MC/HDP/ATHUB/IH/BIF.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Make amdgpu_ring_mux functions as static

lkp robot reported missing-prototypes and unused-but-set-variable warnings on
some functions of amdgpu_mcbp_mux.c. Make them static and remove the unused
variable.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: generally allow over-commit during BO allocation

We already fallback to a dummy BO with no backing store when we
allocate GDS,GWS and OA resources and to GTT when we allocate VRAM.

Drop all those workarounds and generalize this for GTT as well. This
fixes ENOMEM issues with runaway applications which try to allocate/free
GTT in a loop and are otherwise only limited by the CPU speed.

The CS will wait for the cleanup of freed up BOs to satisfy the
various domain specific limits and so effectively throttle those
buggy applications down to a sane allocation behavior again.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix array index out of bound error in DCN32 DML

[Why&How]
LinkCapacitySupport array is indexed with the number of voltage states and
not the number of max DPPs. Fix the error by changing the array
declaration to use the correct (larger) array size of total number of
voltage states.

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.215

Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: set optimized required for comp buf changes

[Description]
When compressed buffer allocation changes, optimized required flag should be
set to trigger an update in optimize bandwidth.

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add debug option to skip PSR CRTC disable

[Why]
It's currently tied to Z10 support, and is required for Z10, but
we can still support Z10 display off without PSR.

We currently need to skip the PSR CRTC disable to prevent stuttering
and underflow from occuring during PSR-SU.

[How]
Add a debug option to allow specifying this separately.

Reviewed-by: Robin Chen <robin.chen@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: correct DML calc error of UrgentLatency

[Why]
The input UrgentLatency in CalculateUrgentBurstFactor
of prefect check is wrong.

[How]
Correct to the correct one to keep same as HW formula

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Zhongwei <Zhongwei.Zhang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>