Konrad Dybcio [Fri, 20 Jan 2023 21:00:56 +0000 (22:00 +0100)]
arm64: dts: qcom: sm8350: Feed DSI1 PHY clocks to DISPCC
This was omitted but is necessary for DSI1 to function. Fix it.
Fixes:
d4a4410583ed ("arm64: dts: qcom: sm8350: Add display system nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120210101.2146852-4-konrad.dybcio@linaro.org
Konrad Dybcio [Fri, 20 Jan 2023 21:00:55 +0000 (22:00 +0100)]
arm64: dts: qcom: sm8350: Fix DSI1 interrupt
The interrupt was wrong, likely copypasted from DSI0. Fix it.
Fixes:
d4a4410583ed ("arm64: dts: qcom: sm8350: Add display system nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120210101.2146852-3-konrad.dybcio@linaro.org
Konrad Dybcio [Fri, 20 Jan 2023 21:00:54 +0000 (22:00 +0100)]
arm64: dts: qcom: sm8350: Add missing #address/size-cells to DSIn
Panels/DRM bridges definitely don't need 64bits of address space and
are usually not 32-bit wide. Set address-cells to 1 and size-cells to
0.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120210101.2146852-2-konrad.dybcio@linaro.org
Sibi Sankar [Tue, 17 Jan 2023 08:58:40 +0000 (14:28 +0530)]
arm64: dts: qcom: sc7280: Add a carveout for modem metadata
Add a new carveout for modem metadata on SC7280 SoCs.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117085840.32356-12-quic_sibis@quicinc.com
Sibi Sankar [Tue, 17 Jan 2023 08:58:39 +0000 (14:28 +0530)]
arm64: dts: qcom: sc7180: Add a carveout for modem metadata
Add a new carveout for modem metadata on SC7180 SoCs.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117085840.32356-11-quic_sibis@quicinc.com
Sibi Sankar [Tue, 17 Jan 2023 08:58:38 +0000 (14:28 +0530)]
arm64: dts: qcom: sdm845: Add a carveout for modem metadata
Add a new carveout for modem metadata on SDM845 SoCs.
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117085840.32356-10-quic_sibis@quicinc.com
Sibi Sankar [Tue, 17 Jan 2023 08:58:37 +0000 (14:28 +0530)]
arm64: dts: qcom: msm8998: Add a carveout for modem metadata
Add a new carveout for modem metadata on MSM8998 SoCs.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117085840.32356-9-quic_sibis@quicinc.com
Sibi Sankar [Tue, 17 Jan 2023 08:58:36 +0000 (14:28 +0530)]
arm64: dts: qcom: msm8996: Add a carveout for modem metadata
Add a new carveout for modem metadata on MSM8996 SoCs.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117085840.32356-8-quic_sibis@quicinc.com
Robert Marko [Fri, 13 Jan 2023 16:44:49 +0000 (17:44 +0100)]
arm64: dts: qcom: ipq8074: correct PCIe QMP PHY output clock names
Current PCIe QMP PHY output name were changed in ("arm64: dts: qcom: Fix
IPQ8074 PCIe PHY nodes") however it did not account for the fact that GCC
driver is relying on the old names to match them as they are being used as
the parent for the gcc_pcie0_pipe_clk and gcc_pcie1_pipe_clk.
This broke parenting as GCC could not find the parent clock, so fix it by
changing to the names that driver is expecting.
Fixes:
942bcd33ed45 ("arm64: dts: qcom: Fix IPQ8074 PCIe PHY nodes")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113164449.906002-9-robimarko@gmail.com
Robert Marko [Fri, 13 Jan 2023 16:44:48 +0000 (17:44 +0100)]
arm64: dts: qcom: ipq8074: fix Gen3 PCIe node
IPQ8074 comes in 2 silicon versions:
* v1 with 2x Gen2 PCIe ports and QMP PHY-s
* v2 with 1x Gen3 and 1x Gen2 PCIe ports and QMP PHY-s
v2 is the final and production version that is actually supported by the
kernel, however it looks like PCIe related nodes were added for the v1 SoC.
Finish the PCIe fixup by using the correct compatible, adding missing ATU
register space, declaring max-link-speed, use correct ranges, add missing
clocks and resets.
Fixes:
33057e1672fe ("ARM: dts: ipq8074: Add pcie nodes")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113164449.906002-8-robimarko@gmail.com
Robert Marko [Fri, 13 Jan 2023 16:44:44 +0000 (17:44 +0100)]
arm64: dts: qcom: ipq8074: set Gen2 PCIe pcie max-link-speed
Add the generic 'max-link-speed' property to describe the Gen2 PCIe link
generation limit.
This allows the generic DWC code to configure the link speed correctly.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113164449.906002-4-robimarko@gmail.com
Robert Marko [Fri, 13 Jan 2023 16:44:43 +0000 (17:44 +0100)]
arm64: dts: qcom: ipq8074: correct Gen2 PCIe ranges
Current ranges property set in Gen2 PCIe node is incorrect, replace it
with the downstream 5.4 QCA kernel value.
Fixes:
33057e1672fe ("ARM: dts: ipq8074: Add pcie nodes")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113164449.906002-3-robimarko@gmail.com
Robert Marko [Fri, 13 Jan 2023 16:44:42 +0000 (17:44 +0100)]
arm64: dts: qcom: ipq8074: fix Gen3 PCIe QMP PHY
IPQ8074 comes in 2 silicon versions:
* v1 with 2x Gen2 PCIe ports and QMP PHY-s
* v2 with 1x Gen3 and 1x Gen2 PCIe ports and QMP PHY-s
v2 is the final and production version that is actually supported by the
kernel, however it looks like PCIe related nodes were added for the v1 SoC.
Now that we have Gen3 QMP PHY support, we can start fixing the PCIe support
by fixing the Gen3 QMP PHY node first.
Change the compatible to the Gen3 QMP PHY, correct the register space start
and size, add the missing misc PCS register space.
Fixes:
33057e1672fe ("ARM: dts: ipq8074: Add pcie nodes")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113164449.906002-2-robimarko@gmail.com
Robert Marko [Fri, 13 Jan 2023 16:44:41 +0000 (17:44 +0100)]
arm64: dts: qcom: ipq8074: fix Gen2 PCIe QMP PHY
Serdes register space sizes are incorrect, update them to match the
actual sizes from downstream QCA 5.4 kernel.
Fixes:
942bcd33ed45 ("arm64: dts: qcom: Fix IPQ8074 PCIe PHY nodes")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113164449.906002-1-robimarko@gmail.com
Krzysztof Kozlowski [Fri, 13 Jan 2023 14:52:31 +0000 (15:52 +0100)]
arm64: dts: qcom: sdm845-db845c: drop label from I2C controllers
Geni I2C Controller node does not allow a "label" property and Linux
driver does not parse it:
sdm845-db845c.dtb: i2c@a8c000: Unevaluated properties are not allowed ('label' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113145231.79280-1-krzysztof.kozlowski@linaro.org
Dmitry Baryshkov [Fri, 13 Jan 2023 12:05:44 +0000 (14:05 +0200)]
arm64: dts: qcom: msm8996: support using GPLL0 as kryocc input
In some cases the driver might need using GPLL0 to drive CPU clocks.
Bring it in through the sys_apcs_aux clock.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113120544.59320-15-dmitry.baryshkov@linaro.org
Manivannan Sadhasivam [Wed, 11 Jan 2023 12:30:04 +0000 (18:00 +0530)]
arm64: dts: qcom: sm8450: Allow both GIC-ITS and internal MSI controller
The devicetree should specify both MSI implementations and the OS/driver
should choose the one based on the platform requirements. Currently, Linux
DWC driver will choose GIC-ITS over the internal MSI controller.
Fixes:
a11bbf6adef4 ("arm64: dts: qcom: sm8450: Use GIC-ITS for PCIe0 and PCIe1")
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111123004.21048-2-manivannan.sadhasivam@linaro.org
Abel Vesa [Thu, 19 Jan 2023 00:45:33 +0000 (02:45 +0200)]
arm64: dts: qcom: sm8550-mtp: Add USB PHYs and HC nodes
Enable USB HC and PHYs nodes on SM8550 MTP board.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119004533.1869870-3-abel.vesa@linaro.org
Abel Vesa [Thu, 19 Jan 2023 00:45:32 +0000 (02:45 +0200)]
arm64: dts: qcom: sm8550: Add USB PHYs and controller nodes
Add USB host controller and PHY nodes.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119004533.1869870-2-abel.vesa@linaro.org
Krzysztof Kozlowski [Mon, 9 Jan 2023 11:22:21 +0000 (12:22 +0100)]
arm64: dts: qcom: sm8250: drop unused properties from tx-macro
Neither qcom,sm8250-lpass-tx-macro bindings nor the driver use
"clock-frequency" and address/size cells properties.
sm8250-mtp.dtb: txmacro@3220000: Unevaluated properties are not allowed ('clock-frequency', '#address-cells', '#size-cells' were unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109112221.102473-4-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Mon, 9 Jan 2023 11:22:20 +0000 (12:22 +0100)]
arm64: dts: qcom: sm8250: drop unused clock-frequency from wsa-macro
Neither qcom,sm8250-lpass-wsa-macro bindings nor the driver use
"clock-frequency" property.
sm8250-hdk.dtb: codec@3240000: Unevaluated properties are not allowed ('clock-frequency' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109112221.102473-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Mon, 9 Jan 2023 11:22:19 +0000 (12:22 +0100)]
arm64: dts: qcom: align OPP table node name with DT schema
Bindings expect OPP tables to start with "opp-table".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109112221.102473-2-krzysztof.kozlowski@linaro.org
Dmitry Baryshkov [Mon, 9 Jan 2023 05:14:01 +0000 (07:14 +0200)]
arm64: dts: qcom: rename mdp nodes to display-controller
Follow the schema change and rename mdp nodes to generic name
'display-controller'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109051402.317577-6-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Mon, 9 Jan 2023 05:13:59 +0000 (07:13 +0200)]
arm64: dts: qcom: rename mdss nodes to display-subsystem
Follow the schema change and rename mdss nodes to generic name
'display-subsystem'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109051402.317577-4-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Mon, 9 Jan 2023 05:01:52 +0000 (07:01 +0200)]
arm64: dts: qcom: add SoC specific compat strings to mdp5 nodes
Add SoC-specific compat string to the MDP5 device nodes to ease
distinguishing between various platforms.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109050152.316606-5-dmitry.baryshkov@linaro.org
Robert Marko [Sun, 8 Jan 2023 13:04:40 +0000 (14:04 +0100)]
arm64: dts: qcom: ipq8074: correct USB3 QMP PHY-s clock output names
It seems that clock-output-names for the USB3 QMP PHY-s where set without
actually checking what is the GCC clock driver expecting, so clock core
could never actually find the parents for usb0_pipe_clk_src and
usb1_pipe_clk_src clocks in the GCC driver.
So, correct the names to be what the driver expects so that parenting
works.
Before:
gcc_usb0_pipe_clk_src 0 0 0
125000000 0 0 50000 Y
gcc_usb1_pipe_clk_src 0 0 0
125000000 0 0 50000 Y
After:
usb3phy_0_cc_pipe_clk 1 1 0
125000000 0 0 50000 Y
usb0_pipe_clk_src 1 1 0
125000000 0 0 50000 Y
gcc_usb0_pipe_clk 1 1 0
125000000 0 0 50000 Y
usb3phy_1_cc_pipe_clk 1 1 0
125000000 0 0 50000 Y
usb1_pipe_clk_src 1 1 0
125000000 0 0 50000 Y
gcc_usb1_pipe_clk 1 1 0
125000000 0 0 50000 Y
Fixes:
5e09bc51d07b ("arm64: dts: ipq8074: enable USB support")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230108130440.670181-2-robimarko@gmail.com
Siddharth Manthan [Sat, 7 Jan 2023 14:19:11 +0000 (19:19 +0500)]
arm64: dts: qcom: Add device tree for Samsung Galaxy Tab A 8.0 (2015)
Galaxy Tab A 8.0 is a tablet, very similar to Tab A 9.7 with major
differences being the display and touchscreen.
Add it's devicetree reusing a common dtsi from gt510.
Signed-off-by: Siddharth Manthan <siddharth.manthan@gmail.com>
[Squashed multiple commits]
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230107141911.47229-4-nikita@trvn.ru
Jasper Korten [Sat, 7 Jan 2023 14:19:10 +0000 (19:19 +0500)]
arm64: dts: qcom: Add device tree for Samsung Galaxy Tab A 9.7 (2015)
The Galaxy Tab A 9.7 (2015) is a Snapdragon 410 based tablet.
This commit introduces basic support for the tablet including the
following features:
- SDHCI (internal and external storage)
- USB Device Mode
- UART
- Regulators
- WCNSS (WiFi/BT)
- GPIO keys
- Fuel gauge
- Touchscreen
- Accelerometer
Part of the DT is split out into a common dtsi since the tablet shares
majority of the design with another variant having a different screen
size.
Signed-off-by: Jasper Korten <jja2000@gmail.com>
Co-developed-by: Siddharth Manthan <siddharth_manthan@outlook.com>
Signed-off-by: Siddharth Manthan <siddharth_manthan@outlook.com>
Co-developed-by: Nikita Travkin <nikita@trvn.ru>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230107141911.47229-3-nikita@trvn.ru
Brian Masney [Tue, 3 Jan 2023 18:22:29 +0000 (13:22 -0500)]
arm64: dts: qcom: sc8280xp: add rng device tree node
Add the necessary device tree node for qcom,prng-ee so we can use the
hardware random number generator. This functionality was tested on a
SA8540p automotive development board using kcapi-rng from libkcapi.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103182229.37169-11-bmasney@redhat.com
Brian Masney [Tue, 3 Jan 2023 18:22:28 +0000 (13:22 -0500)]
arm64: dts: qcom: sc8280xp: add aliases for i2c4 and i2c21
Add aliases for i2c4 and i2c21 to the crd and x13s DTS files so that
what's exposed to userspace doesn't change in the future if additional
i2c buses are enabled on these platforms.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103182229.37169-10-bmasney@redhat.com
Brian Masney [Tue, 3 Jan 2023 18:22:27 +0000 (13:22 -0500)]
arm64: dts: qcom: sa8540p-ride: add i2c nodes
Add the necessary nodes in order to get i2c0, i2c1, i2c12, i2c15, and
i2c18 functioning on the automotive board and exposed to userspace.
This work was derived from various patches that Qualcomm delivered
to Red Hat in a downstream kernel. This change was validated by using
i2c-tools 4.3.3 on CentOS Stream 9:
[root@localhost ~]# i2cdetect -l
i2c-0 i2c Geni-I2C I2C adapter
i2c-1 i2c Geni-I2C I2C adapter
i2c-12 i2c Geni-I2C I2C adapter
i2c-15 i2c Geni-I2C I2C adapter
i2c-18 i2c Geni-I2C I2C adapter
[root@localhost ~]# i2cdetect -a -y 15
Warning: Can't use SMBus Quick Write command, will skip some addresses
0 1 2 3 4 5 6 7 8 9 a b c d e f
00:
10:
20:
30: -- -- -- -- -- -- -- --
40:
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60:
70:
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Shazad Hussain <quic_shazhuss@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103182229.37169-9-bmasney@redhat.com
Brian Masney [Tue, 3 Jan 2023 18:22:26 +0000 (13:22 -0500)]
arm64: dts: qcom: sc8280xp: add missing spi nodes
Add the missing nodes for the spi buses that's present on this SoC.
This work was derived from various patches that Qualcomm delivered
to Red Hat in a downstream kernel.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103182229.37169-8-bmasney@redhat.com
Brian Masney [Tue, 3 Jan 2023 18:22:25 +0000 (13:22 -0500)]
arm64: dts: qcom: sc8280xp: add missing i2c nodes
Add the missing nodes for the i2c buses that's present on this SoC.
This work was derived from various patches that Qualcomm delivered
to Red Hat in a downstream kernel.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103182229.37169-7-bmasney@redhat.com
Brian Masney [Tue, 3 Jan 2023 18:22:24 +0000 (13:22 -0500)]
arm64: dts: qcom: sc8280xp: rename qup0_i2c4 to i2c4
In preparation for adding the missing SPI and I2C nodes to
sc8280xp.dtsi, it was decided to rename all of the existing qupX_
uart, spi, and i2c nodes to drop the qupX_ prefix. Let's go ahead
and rename qup0_i2c4 to i2c4.
Note that some nodes are moved in the file by this patch to preserve
the expected sort order in the file. Additionally, the properties
within the pinctrl state node are sorted to match the expected order
that's typically done in other DTs.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/lkml/20221212182314.1902632-1-bmasney@redhat.com/
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103182229.37169-6-bmasney@redhat.com
Brian Masney [Tue, 3 Jan 2023 18:22:23 +0000 (13:22 -0500)]
arm64: dts: qcom: sc8280xp: rename qup2_i2c5 to i2c21
In preparation for adding the missing SPI and I2C nodes to
sc8280xp.dtsi, it was decided to rename all of the existing qupX_
uart, spi, and i2c nodes to drop the qupX_ prefix. Let's go ahead
and rename qup2_i2c5 to i2c21. Under the old name, this was the 5th
index under qup2, which starts at index 16.
Note that some nodes are moved in the file by this patch to preserve
the expected sort order in the file. Additionally, the properties
within the pinctrl state node are sorted to match the expected order
that's typically done in other DTs.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/lkml/20221212182314.1902632-1-bmasney@redhat.com/
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103182229.37169-5-bmasney@redhat.com
Brian Masney [Tue, 3 Jan 2023 18:22:22 +0000 (13:22 -0500)]
arm64: dts: qcom: sc8280xp: rename qup2_uart17 to uart17
In preparation for adding the missing SPI and I2C nodes to
sc8280xp.dtsi, it was decided to rename all of the existing qupX_
uart, spi, and i2c nodes to drop the qupX_ prefix. Let's go ahead
and rename qup2_uart17 to uart17. Note that some nodes are moved in the
file by this patch to preserve the expected sort order in the file.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/lkml/20221212182314.1902632-1-bmasney@redhat.com/
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103182229.37169-4-bmasney@redhat.com
Konrad Dybcio [Mon, 2 Jan 2023 09:46:42 +0000 (10:46 +0100)]
arm64: dts: qcom: sm6115: Pad addresses to 8 hex digits
Some addresses were 7-hex-digits long, or less. Fix that.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102094642.74254-18-konrad.dybcio@linaro.org
Konrad Dybcio [Mon, 2 Jan 2023 09:46:41 +0000 (10:46 +0100)]
arm64: dts: qcom: msm8994-kitakami: Pad addresses to 8 hex digits
Some addresses were 7-hex-digits long, or less. Fix that.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102094642.74254-17-konrad.dybcio@linaro.org
Konrad Dybcio [Mon, 2 Jan 2023 09:46:40 +0000 (10:46 +0100)]
arm64: dts: qcom: sm8450: Pad addresses to 8 hex digits
Some addresses were 7-hex-digits long, or less. Fix that.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102094642.74254-16-konrad.dybcio@linaro.org
Konrad Dybcio [Mon, 2 Jan 2023 09:46:39 +0000 (10:46 +0100)]
arm64: dts: qcom: msm8994-octagon: Pad addresses to 8 hex digits
Some addresses were 7-hex-digits long, or less. Fix that.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102094642.74254-15-konrad.dybcio@linaro.org
Konrad Dybcio [Mon, 2 Jan 2023 09:46:38 +0000 (10:46 +0100)]
arm64: dts: qcom: sc7280: Pad addresses to 8 hex digits
Some addresses were 7-hex-digits long, or less. Fix that.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102094642.74254-14-konrad.dybcio@linaro.org
Konrad Dybcio [Mon, 2 Jan 2023 09:46:37 +0000 (10:46 +0100)]
arm64: dts: qcom: sc7180: Pad addresses to 8 hex digits
Some addresses were 7-hex-digits long, or less. Fix that.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102094642.74254-13-konrad.dybcio@linaro.org
Konrad Dybcio [Mon, 2 Jan 2023 09:46:36 +0000 (10:46 +0100)]
arm64: dts: qcom: sm8350: Pad addresses to 8 hex digits
Some addresses were 7-hex-digits long, or less. Fix that.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102094642.74254-12-konrad.dybcio@linaro.org
Konrad Dybcio [Mon, 2 Jan 2023 09:46:35 +0000 (10:46 +0100)]
arm64: dts: qcom: sm8250: Pad addresses to 8 hex digits
Some addresses were 7-hex-digits long, or less. Fix that.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102094642.74254-11-konrad.dybcio@linaro.org
Konrad Dybcio [Mon, 2 Jan 2023 09:46:34 +0000 (10:46 +0100)]
arm64: dts: qcom: sdm845: Pad addresses to 8 hex digits
Some addresses were 7-hex-digits long, or less. Fix that.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102094642.74254-10-konrad.dybcio@linaro.org
Konrad Dybcio [Mon, 2 Jan 2023 09:46:33 +0000 (10:46 +0100)]
arm64: dts: qcom: sm6350: Pad addresses to 8 hex digits
Some addresses were 7-hex-digits long, or less. Fix that.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102094642.74254-9-konrad.dybcio@linaro.org
Konrad Dybcio [Mon, 2 Jan 2023 09:46:32 +0000 (10:46 +0100)]
arm64: dts: qcom: sm8150: Pad addresses to 8 hex digits
Some addresses were 7-hex-digits long, or less. Fix that.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102094642.74254-8-konrad.dybcio@linaro.org
Konrad Dybcio [Mon, 2 Jan 2023 09:46:31 +0000 (10:46 +0100)]
arm64: dts: qcom: sc8280xp: Pad addresses to 8 hex digits
Some addresses were 7-hex-digits long, or less. Fix that.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102094642.74254-7-konrad.dybcio@linaro.org
Konrad Dybcio [Mon, 2 Jan 2023 09:46:30 +0000 (10:46 +0100)]
arm64: dts: qcom: ipq6018: Use lowercase hex
One value escaped my previous lowercase hexification. Take care of it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102094642.74254-6-konrad.dybcio@linaro.org
Konrad Dybcio [Mon, 2 Jan 2023 09:46:29 +0000 (10:46 +0100)]
arm64: dts: qcom: ipq6018: Add/remove some newlines
Some lines were broken very aggresively, presumably to fit under 80 chars
and some places could have used a newline, particularly between subsequent
nodes. Address all that and remove redundant comments near PCIe ranges
while at it so as not to exceed 100 chars needlessly.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102094642.74254-5-konrad.dybcio@linaro.org
Konrad Dybcio [Mon, 2 Jan 2023 09:46:28 +0000 (10:46 +0100)]
arm64: dts: qcom: ipq6018: Sort nodes properly
Order nodes by unit address if one exists and alphabetically otherwise.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102094642.74254-4-konrad.dybcio@linaro.org
Konrad Dybcio [Mon, 2 Jan 2023 09:46:27 +0000 (10:46 +0100)]
arm64: dts: qcom: ipq6018: Fix up indentation
The dwc3 subnode was indented using spaces for some reason and other
properties were not exactly properly indented. Fix it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102094642.74254-3-konrad.dybcio@linaro.org
Konrad Dybcio [Mon, 2 Jan 2023 09:46:26 +0000 (10:46 +0100)]
arm64: dts: qcom: ipq6018: Pad addresses to 8 hex digits
Some addresses were 7-hex-digits long, or less. Fix that.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102094642.74254-2-konrad.dybcio@linaro.org
Abel Vesa [Wed, 18 Jan 2023 23:05:26 +0000 (01:05 +0200)]
arm64: dts: qcom: sm8550-mtp: Add PCIe PHYs and controllers nodes
Enable PCIe controllers and PHYs nodes on SM8550 MTP board.
Co-developed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230118230526.1499328-3-abel.vesa@linaro.org
Abel Vesa [Wed, 18 Jan 2023 23:05:25 +0000 (01:05 +0200)]
arm64: dts: qcom: sm8550: Add PCIe PHYs and controllers nodes
Add PCIe controllers and PHY nodes.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230118230526.1499328-2-abel.vesa@linaro.org
Neil Armstrong [Wed, 18 Jan 2023 16:25:13 +0000 (17:25 +0100)]
arm64: dts: qcom: sm8550-mtp: enable adsp, cdsp & mdss
Add the aDSP, cDSP and MPSS firmware and "Devicetree" firmware paths
for the SM8550 MTP platform.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221115-topic-sm8550-upstream-dts-remoteproc-v3-3-815a1753de34@linaro.org
Neil Armstrong [Wed, 18 Jan 2023 16:25:12 +0000 (17:25 +0100)]
arm64: dts: qcom: sm8550: add adsp, cdsp & mdss nodes
This adds support for the aDSP, cDSP and MPSS Subsystems found in
the SM8550 SoC.
The aDSP, cDSP and MPSS needs:
- smp2p nodes to get event back from the subsystems
- remoteproc nodes with glink-edge subnodes providing all needed
resources to start and run the subsystems
In addition, the MPSS Subsystem needs a rmtfs_mem dedicated
memory zone.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221115-topic-sm8550-upstream-dts-remoteproc-v3-2-815a1753de34@linaro.org
Abel Vesa [Wed, 18 Jan 2023 16:25:11 +0000 (17:25 +0100)]
arm64: dts: qcom: sm8550: Add interconnect path to SCM node
Add the interconnect path to SCM dts node.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221115-topic-sm8550-upstream-dts-remoteproc-v3-1-815a1753de34@linaro.org
Neil Armstrong [Wed, 18 Jan 2023 14:24:58 +0000 (15:24 +0100)]
arm64: dts: qcom: sm8550-mtp: add DSI panel
Add nodes for the Visionox VTDR6130 found on the SM8550-MTP
device.
TLMM states are also added for the Panel reset GPIO and
Tearing Effect signal for when the panel is running in
DSI Command mode.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230104-topic-sm8550-upstream-dts-display-v4-3-1729cfc0e5db@linaro.org
Neil Armstrong [Wed, 18 Jan 2023 14:24:57 +0000 (15:24 +0100)]
arm64: dts: qcom: sm8550-mtp: enable display hardware
Enable MDSS/DPU/DSI0 on SM8550-MTP device.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230104-topic-sm8550-upstream-dts-display-v4-2-1729cfc0e5db@linaro.org
Neil Armstrong [Wed, 18 Jan 2023 14:24:56 +0000 (15:24 +0100)]
arm64: dts: qcom: sm8550: add display hardware devices
Add devices tree nodes describing display hardware on SM8550:
- Display Clock Controller
- MDSS
- MDP
- two DSI controllers and DSI PHYs
This does not provide support for DP controllers present on the SM8550.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230104-topic-sm8550-upstream-dts-display-v4-1-1729cfc0e5db@linaro.org
Bjorn Andersson [Wed, 18 Jan 2023 23:35:55 +0000 (17:35 -0600)]
Merge branch '
20230103-topic-sm8550-upstream-dispcc-v3-1-
8a03d348c572@linaro.org' into HEAD
Merge the DT binding in order to get the dispcc include file.
Neil Armstrong [Mon, 9 Jan 2023 15:47:21 +0000 (16:47 +0100)]
dt-bindings: clock: document SM8550 DISPCC clock controller
Document device tree bindings for display clock controller for
Qualcomm SM8550 SoC.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103-topic-sm8550-upstream-dispcc-v3-1-8a03d348c572@linaro.org
Pavankumar Kondeti [Tue, 17 Jan 2023 09:35:33 +0000 (15:05 +0530)]
arm64: dts: qcom: sm8550: fix xo clock source in cpufreq-hw node
Currently, available frequencies for all CPUs are appearing as 2x
of the actual frequencies. Use xo clock source as bi_tcxo in the
cpufreq-hw node to fix this.
Signed-off-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Tested-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117093533.3710000-1-quic_pkondeti@quicinc.com
Markuss Broks [Fri, 6 Jan 2023 14:31:49 +0000 (14:31 +0000)]
arm64: dts: qcom: msm8916-samsung-j5-common: Add MUIC support
The MUIC installed is a part of SM5703 MFD, and it seems to work
the same as the SM5502 MUIC unit.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
[Apply for msm8916-samsung-j5x]
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106143051.547302-1-linmengbo0689@protonmail.com
Lin, Meng-Bo [Fri, 6 Jan 2023 14:31:28 +0000 (14:31 +0000)]
arm64: dts: qcom: msm8916-samsung-j5-common: Add Hall sensor
Samsung Galaxy J5 2015 and 2016 have a Hall sensor on GPIO pin 52.
Add GPIO Hall sensor for them.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106143037.547248-1-linmengbo0689@protonmail.com
Lin, Meng-Bo [Fri, 6 Jan 2023 14:31:19 +0000 (14:31 +0000)]
arm64: dts: qcom: msm8916-samsung-j5-common: Add new device trees
After moving msm8916-samsung-j5.dts to msm8916-samsung-j5-common.dtsi,
Add new J5 2016 device tree.
[Add j5x device tree]
Co-developed-by: Josef W Menad <JosefWMenad@protonmail.ch>
Signed-off-by: Josef W Menad <JosefWMenad@protonmail.ch>
[Use &pm8916_usbin as USB extcon and add chassis-type for j5x]
Co-developed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
[Use common init device tree]
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106143024.547194-1-linmengbo0689@protonmail.com
Lin, Meng-Bo [Fri, 6 Jan 2023 14:31:11 +0000 (14:31 +0000)]
arm64: dts: qcom: msm8916-samsung-j5-common: Add initial common device tree
The smartphones below are using the MSM8916 SoC,
which are released in 2015-2016:
Samsung Galaxy J5 2015 (SM-J500*)
Samsung Galaxy J5 2016 (SM-J510*)
Move msm8916-samsung-j5.dts to msm8916-samsung-j5-common.dtsi, and add
a common device tree for with initial support for:
- GPIO keys
- SDHCI (internal and external storage)
- USB Device Mode
- UART (on USB connector via the SM5703 MUIC)
- WCNSS (WiFi/BT)
- Regulators
The two devices (all other variants of J5 released in 2015 and J5X
released in 2016) are very similar, with some differences in display and
GPIO pins. The common parts are shared in msm8916-samsung-j5-common.dtsi
to reduce duplication.
This patch rewrites J5 2015 devices, later patches will add support for
other models.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106143010.547140-1-linmengbo0689@protonmail.com
Luca Weiss [Wed, 4 Jan 2023 19:37:59 +0000 (13:37 -0600)]
arm64: dts: qcom: sm7225-fairphone-fp4: enable IPA
IPA is used for mobile data. Enable it.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230104193759.3286014-3-elder@linaro.org
Luca Weiss [Wed, 4 Jan 2023 19:37:58 +0000 (13:37 -0600)]
arm64: dts: qcom: sm6350: add IPA node
IPA is used for mobile data. Add a node describing it.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230104193759.3286014-2-elder@linaro.org
Konrad Dybcio [Wed, 4 Jan 2023 17:16:42 +0000 (18:16 +0100)]
arm64: dts: qcom: sm6350: Set up DDR & L3 scaling
Add the CPU OPP tables including core frequency and L3 bus frequency.
The L3 throughput values were chosen by studying the frequencies
available in HW LUT and picking the highest one that's less than the
CPU frequency. DDR clock rates come from the vendor kernel.
Available values from the HW LUT:
300000000
556800000
652800000
806400000
844800000
940800000
1132800000
1209600000
1286400000
1401600000
1459200000
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230104171643.1004054-3-konrad.dybcio@linaro.org
Konrad Dybcio [Wed, 4 Jan 2023 17:16:41 +0000 (18:16 +0100)]
arm64: dts: qcom: sm6350: Add OSM L3 node
Enable the OSM block responsible for scaling the L3 cache.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230104171643.1004054-2-konrad.dybcio@linaro.org
Dmitry Baryshkov [Sun, 1 Jan 2023 19:40:32 +0000 (21:40 +0200)]
arm64: dts: qcom: qcs404: specify per-sensor calibration cells
Specify pre-parsed per-sensor calibration nvmem cells in the tsens
device node rather than parsing the whole data blob in the driver.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230101194034.831222-19-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Sun, 1 Jan 2023 19:40:31 +0000 (21:40 +0200)]
arm64: dts: qcom: msm8976: specify per-sensor calibration cells
Specify pre-parsed per-sensor calibration nvmem cells in the tsens
device node rather than parsing the whole data blob in the driver.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230101194034.831222-18-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Sun, 1 Jan 2023 19:40:30 +0000 (21:40 +0200)]
arm64: dts: qcom: msm8916: specify per-sensor calibration cells
Specify pre-parsed per-sensor calibration nvmem cells in the tsens
device node rather than parsing the whole data blob in the driver.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230101194034.831222-17-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Sun, 1 Jan 2023 19:40:29 +0000 (21:40 +0200)]
arm64: dts: qcom: msm8956: use SoC-specific compat for tsens
The slope values used during tsens calibration differ between msm8976
and msm8956 SoCs. Use SoC-specific compat value for the msm8956 SoC.
Fixes:
0484d3ce0902 ("arm64: dts: qcom: Add DTS for MSM8976 and MSM8956 SoCs")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230101194034.831222-16-dmitry.baryshkov@linaro.org
Alex Elder [Sat, 31 Dec 2022 00:27:16 +0000 (18:27 -0600)]
arm64: dts: qcom: use qcom,gsi-loader for IPA
Depending on the platform, either the modem or the AP must load GSI
firmware for IPA before it can be used. To date, this has been
indicated by the presence or absence of a "modem-init" property.
That mechanism has been deprecated. Instead, we indicate how GSI
firmware should be loaded by the value of the "qcom,gsi-loader"
property.
Update all arm64 platforms that use IPA to use the "qcom,gsi-loader"
property to specify how the GSI firmware is loaded.
Update the affected nodes so the status property is last.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[bjorn: Moved sc7280 change herobrine-lte-sku]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221231002716.2367375-3-elder@linaro.org
Krzysztof Kozlowski [Fri, 30 Dec 2022 13:56:45 +0000 (14:56 +0100)]
arm64: dts: qcom: sc7280-idp: add amp pin config function
Bindings expect each pin config to come with a "function" property:
sc7280-crd-r3.dtb: pinctrl@f100000: amp-en-state: 'oneOf' conditional failed, one must be fixed:
'function' is a required property
'bias-pull-down', 'drive-strength', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221230135645.56401-9-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 30 Dec 2022 13:56:44 +0000 (14:56 +0100)]
arm64: dts: qcom: msm8916-samsung-a2015: correct motor pinctrl node name
Correct typo in motor pinctrl node name:
msm8916-samsung-a5u-eur.dtb: pinctrl@1000000: 'motor-en-default-stae' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221230135645.56401-8-krzysztof.kozlowski@linaro.org
Petr Vorel [Mon, 26 Dec 2022 18:54:39 +0000 (19:54 +0100)]
arm64: dts: qcom: msm8992-bullhead: Disable dfps_data_mem
It's disabled on downstream [1] thus not shown on downstream dmesg.
Removing it fixes warnings on v6.1:
[ 0.000000] OF: reserved mem: OVERLAP DETECTED!
[ 0.000000] dfps_data_mem@3400000 (0x0000000003400000--0x0000000003401000) overlaps with memory@3400000 (0x0000000003400000--0x0000000004600000)
[1] https://android.googlesource.com/kernel/msm.git/+/android-7.0.0_r0.17/arch/arm64/boot/dts/lge/msm8992-bullhead.dtsi#137
Fixes:
976d321f32dc ("arm64: dts: qcom: msm8992: Make the DT an overlay on top of 8994")
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221226185440.440968-3-pevik@seznam.cz
Petr Vorel [Mon, 26 Dec 2022 18:54:38 +0000 (19:54 +0100)]
arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem size
Original google firmware reports 12 MiB:
[ 0.000000] cma: Found cont_splash_mem@0, memory base 0x0000000003400000, size 12 MiB, limit 0xffffffffffffffff
which is actually 12*1024*1024 = 0xc00000.
This matches the aosp source [1]:
&cont_splash_mem {
reg = <0 0x03400000 0 0xc00000>;
};
Fixes:
3cb6a271f4b0 ("arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem mapping")
Fixes:
976d321f32dc ("arm64: dts: qcom: msm8992: Make the DT an overlay on top of 8994")
[1] https://android.googlesource.com/kernel/msm.git/+/android-7.0.0_r0.17/arch/arm64/boot/dts/lge/msm8992-bullhead.dtsi#141
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221226185440.440968-2-pevik@seznam.cz
Bjorn Andersson [Wed, 18 Jan 2023 22:59:11 +0000 (16:59 -0600)]
Merge tag 'qcom-arm64-fixes-for-6.2' into arm64-for-6.3
Qualcomm ARM64 DTS fixes for 6.2
The cluster idle issue was resolved on SM8250, so the change disabling
the cluster state is being reverted.
Issues where identified with the QMP PHY binding, that would prevent
enablement of Displayport and it was decided not to support the old
binding for the recently introduced SC8280XP, which broke USB. This
adjusts the USB PHY nodes to the new binding. The reset signal for the
first QMP PHY is corrected as well.
The reserved memory map is updated on Xiaomi Mi 4C and Huawei Nexus 6P,
to avoid instabilities caused by use of protected memory regions.
The compatible for the MSM8992 TCSR mutex is corrected as well.
Lastly SDHCI interconnects on SM8350 are corrected to match the
providers #interconnect-cells.
Robert Foss [Tue, 17 Jan 2023 11:57:11 +0000 (12:57 +0100)]
arm64: dts: qcom: sm8350: Use 2 interconnect cells
Use two interconnect cells in order to optionally
support a path tag.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117115712.1054613-1-rfoss@kernel.org
Robert Foss [Tue, 17 Jan 2023 11:25:37 +0000 (12:25 +0100)]
arm64: dts: qcom: sm8350: Add &tlmm gpio-line-names
Add GPIO line names as described by the sm8350-hdk schematic.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117112537.1016250-1-rfoss@kernel.org
Bjorn Andersson [Tue, 17 Jan 2023 18:46:30 +0000 (10:46 -0800)]
arm64: dts: qcom: sc8280xp: Define CMA region for CRD and X13s
While booting the CRD, a series of CMA allocation errors can be seen in
the kernel log:
cma: cma_alloc: reserved: alloc failed, req-size: 128 pages, ret: -12
Growing the CMA region and querying /proc/meminfo indicates that a newly
booted system (currently) uses 64MB CMA.
Define a memory region sufficiently large for the current use cases, to
avoid forcing users to add this themselves, through command line
parameters etc.
While fixing the CRD define the same region for the X13s.
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117184630.2775905-1-quic_bjorande@quicinc.com
Judy Hsiao [Wed, 18 Jan 2023 01:18:53 +0000 (01:18 +0000)]
arm64: dts: qcom: sc7280: add DP audio to herobrine rt5682 1-mic dtsi
1. Add DisplayPort sound node and lpass_cpu node.
2. Adjust the dai-link order to make the order to
be consistent with sc7280-herobrine-audio-rt5682-3mic.dtsi.
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230118011853.1614566-1-judyhsiao@chromium.org
Johan Hovold [Tue, 3 Jan 2023 10:31:41 +0000 (11:31 +0100)]
arm64: dts: qcom: sm8250: clean up wcd938x codec node
Clean up the wcd938x codec node somewhat by adding newline separators,
reordering properties and renaming it 'audio-codec'.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103103141.15807-7-johan+linaro@kernel.org
Johan Hovold [Tue, 3 Jan 2023 10:31:40 +0000 (11:31 +0100)]
arm64: dts: qcom: sm8450-hdk: move wcd938x codec node
The wcd938x codec is not a memory-mapped device and does not belong
under the soc node.
Move the node to the root node to avoid DT validation failures.
While at it, clean up the node somewhat by reordering properties and
renaming it 'audio-codec'.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103103141.15807-6-johan+linaro@kernel.org
Johan Hovold [Tue, 3 Jan 2023 10:31:39 +0000 (11:31 +0100)]
arm64: dts: qcom: sc8280xp-x13s: move wcd938x codec node
The wcd938x codec is not a memory-mapped device and does not belong
under the soc node.
Move the node to the root node to avoid DT validation failures.
While at it, clean up the node somewhat by adding newline separators,
reordering properties and renaming it 'audio-codec'.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103103141.15807-5-johan+linaro@kernel.org
Johan Hovold [Tue, 3 Jan 2023 10:31:37 +0000 (11:31 +0100)]
arm64: dts: qcom: sc8280xp-x13s: move vamacro node
Move the vamacro node to restore the alphabetical sort order.
While at it, add some newline separators to improve readability.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103103141.15807-3-johan+linaro@kernel.org
Johan Hovold [Tue, 3 Jan 2023 10:31:36 +0000 (11:31 +0100)]
arm64: dts: qcom: sc8280xp: disable sound nodes
The sound nodes in the SoC dtsi should be disabled by default.
Note that the lpass-tlmm and macro blocks depend on having the board dts
enable the adsp and specifying an appropriate firmware to enable the
q6prm clock controller.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103103141.15807-2-johan+linaro@kernel.org
Krzysztof Kozlowski [Wed, 18 Jan 2023 09:42:24 +0000 (10:42 +0100)]
arm64: dts: qcom: sc8280xp: drop unused properties from tx-macro
tx-macro does not have children and does not allow address/size cells:
sc8280xp-crd.dtb: txmacro@3220000: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230118094224.51704-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 18 Jan 2023 09:42:23 +0000 (10:42 +0100)]
arm64: dts: qcom: sc8280xp: drop bogus clock-controller property
There is no "clock-controller" property:
sa8295p-adp.dtb: service@2: clock-controller: 'clock-controller' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/sound/qcom,q6prm.yaml
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230118094224.51704-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 18 Jan 2023 09:42:22 +0000 (10:42 +0100)]
arm64: dts: qcom: sm8250: drop unused clock-frequency from rx-macro
Neither qcom,sm8250-lpass-rx-macro bindings nor the driver use
"clock-frequency" property.
sm8250-mtp.dtb: rxmacro@3200000: Unevaluated properties are not allowed ('clock-frequency' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230118094224.51704-1-krzysztof.kozlowski@linaro.org
Yunlong Jia [Tue, 17 Jan 2023 08:56:25 +0000 (08:56 +0000)]
arm64: dts: qcom: sc7180: set ath10k output power calibration string
Add the string to load RF output power table for pazquel360 project.
Signed-off-by: Yunlong Jia <ecs.beijing2022@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117085212.1.If242b1cd61b2e87e312dd9cf81e20301bae2a5a4@changeid
Bhupesh Sharma [Mon, 16 Jan 2023 16:40:32 +0000 (22:10 +0530)]
arm64: dts: qcom: sm6115: Add debug related nodes
Add dtsi nodes related to coresight debug units such
as cti, etm, etr, funnel(s), replicator(s), etc. for
Qualcomm sm6115 SoC.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230116164032.551223-1-bhupesh.sharma@linaro.org
Robert Foss [Tue, 17 Jan 2023 12:02:23 +0000 (13:02 +0100)]
arm64: dts: qcom: sm8350-hdk: Enable lt9611uxc dsi-hdmi bridge
The sm8350-hdk ships with the LT9611 UXC DSI/HDMI bridge chip.
In order to toggle the board to enable the HDMI output,
switch #7 & #8 on the rightmost multi-switch package have
to be toggled to On.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117120223.1055225-4-rfoss@kernel.org
Robert Foss [Tue, 17 Jan 2023 12:02:22 +0000 (13:02 +0100)]
arm64: dts: qcom: sm8350-hdk: Enable display & dsi nodes
Enable the display subsystem and the dsi0 output for
the sm8350-hdk board.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117120223.1055225-3-rfoss@kernel.org
Robert Foss [Tue, 17 Jan 2023 12:02:21 +0000 (13:02 +0100)]
arm64: dts: qcom: sm8350: Add display system nodes
Add mdss, mdss_mdp, dsi0, dsi0_phy nodes. With these
nodes the display subsystem is configured to support
one DSI output.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117120223.1055225-2-rfoss@kernel.org
Abel Vesa [Mon, 16 Jan 2023 14:10:00 +0000 (16:10 +0200)]
arm64: dts: qcom: sm8550-mtp: Add UFS host controller and PHY node
Enable UFS host controller and PHY node on SM8550 MTP board.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230116141000.1831351-2-abel.vesa@linaro.org
projects / platform / kernel / linux-starfive.git / log