daily update

* common/format.c (parse_format_string): Fix whitespace.

oops - omitted for previous delta.

* emultempl/metagelf.em (build_section_lists): Use sec_info_type
rather than userdata->flags.just_syms.

(elf_metag_adjust_dynamic_symbol): Don't error on zero size dynbss symbol.

* elf32-metag.c: Use bfd_get_linker_section to get SEC_LINKER_CREATED sections.

Fix snafu.

* gas/config/tc-arm.c (arm_cpus): Add support for mcpu=marvell-pj4 core.

* stack.c (return_command): Work around uninitialized variable
warning.

gdb/

2013-02-08  Yufeng Zhang  <yufeng.zhang@arm.com>

* aarch64-linux-tdep.c (AARCH64_LINUX_SIZEOF_GREGSET): Change the
number of the registers from 36 to 34.

bfd/

2013-02-08  Yufeng Zhang  <yufeng.zhang@arm.com>

* elf64-aarch64.c (elf64_aarch64_grok_prstatus): Change 'size' from
288 to 272.

Update NEWS to mention new AArch64 native and target support.

Adding myself to MAINTAINERS.

2013-02-08  Marcus Shawcroft  <marcus.shawcroft@arm.com>

        * MAINTAINERS (Write After Approval): Add myself.

* gas/nios2/nios2.exp: Add copyright.
(run_list_test): Delete.  Adjust callers to use standard version.

Adding aarch64-linux-nat support.

2013-02-08  Jim MacArthur  <jim.macarthur@arm.com>
    Marcus Shawcroft  <marcus.shawcroft@arm.com>
    Nigel Stephens  <nigel.stephens@arm.com>
    Yufeng Zhang  <yufeng.zhang@arm.com>

* aarch64-linux-nat.c: New file.
* config/aarch64/linux.mh: New file.
* configure.host: Add AArch64.
* Makefile.in (ALLDEPFILES): Add aarch64-linux-nat.c.

PR binutils/15106
* elf-bfd.h (struct elf_obj_tdata): Add elf_find_function_cache.
* elf.c (elf_find_function): Revert last change.  Use new
tdata field rather than static vars for cache.

Set STB_GNU_UNIQUE only if symbol is defined in regular object

bfd/

PR ld/15107
* elflink.c (elf_link_output_extsym): Set STB_GNU_UNIQUE only if
symbol is defined in regular object.

ld/testsuite/

PR ld/15107
* ld-unique/unique_empty.s: Add reference to "b".

*** empty log message ***

daily update

* cli/cli-cmds.c (_initialize_cli_cmds): Clarify argument to
disassemble command.

doc/
* gdb.texinfo (Machine Code): Clarify argument to disassemble
command.

2013-02-07  Marcus Shawcroft  <marcus.shawcroft@arm.com>

        * linux-aarch64-low.c (aarch64_arch_setup): Clamp
        aarch64_num_wp_regs and aarch64_num_bp_regs to
        AARCH64_HWP_MAX_NUM and AARCH64_HBP_MAX_NUM respectively.

* elfcomm.c (get_archive_member_name): Prevent seg-fault if a
corrupt archive uses long names but has no long name table.

Enable TLS support in aarch64-linux-tdep.c

2013-02-07  Marcus Shawcroft  <marcus.shawcroft@arm.com>

        * aarch64-linux-tdep.c (aarch64_linux_init_abi): Call
        set_gdbarch_fetch_tls_load_module_address.

Switch AArch64 gdbserver ps_get_thread_area to PTRACE_GETREGSET.

2013-02-06  Marcus Shawcroft  <marcus.shawcroft@arm.com>

       * linux-aarch64-low.c (ps_get_thread_area): Replace
       PTRACE_GET_THREAD_AREA with PTRACE_GETREGSET.

merge from gcc

PR binutils/15106
* elf.c (elf_find_function): Don't cache if symbols change.

PR binutils/14873
* elf-attrs.c (_bfd_elf_copy_obj_attributes): Don't attempt to
copy attributes from or to non-ELF.

Don't resolve size relocation against non-zero TLS symbol

bfd/

* elf32-i386.c (elf_i386_allocate_dynrelocs): Don't clear pc_count
for non-zero TLS symbol.
(elf_i386_relocate_section): Don't resolve size relocation against
non-zero TLS symbol.
* elf64-x86-64.c (elf_x86_64_allocate_dynrelocs): Don't clear
pc_count for non-zero TLS symbol.
(elf_x86_64_relocate_section): Don't resolve size relocation
against non-zero TLS symbol.

ld/testsuite/

* ld-size/size-10.rd: Updated.
* ld-size/size-8.rd: Likewise.
* ld-size/size32-2-i386.d: Likewise.
* ld-size/size32-2-x32.d: Likewise.
* ld-size/size32-2-x86-64.d: Likewise.
* ld-size/size64-2-x32.d: Likewise.
* ld-size/size64-2-x86-64.d: Likewise.

* ld-size/size.exp (run_time_tests): Pass --hash-styl=gnu to
linker for size-8 test.

*** empty log message ***

2013-02-06  Sandra Loosemore  <sandra@codesourcery.com>
            Andrew Jenner <andrew@codesourcery.com>

Based on patches from Altera Corporation.

bfd/
* Makefile.am (ALL_MACHINES): Add cpu-nios2.lo.
(ALL_MACHINES_CFILES): Add cpu-nios2.c.
(BFD_BACKENDS): Add elf32-nios2.lo.
(BFD32_BACKENDS_CFILES): Add elf32-nios2.c.
* Makefile.in: Regenerated.
* configure.in: Add entries for bfd_elf32_bignios2_vec and
bfd_elf32_littlenios2_vec.
* configure: Regenerated.
* config.bfd: Add cases for nios2.
* archures.c (enum bfd_architecture): Add bfd_arch_nios2.
(bfd_mach_nios2): Define.
(bfd_nios2_arch): Declare.
(bfd_archures_list): Add bfd_nios2_arch.
* targets.c (bfd_elf32_bignios2_vec): Declare.
(bfd_elf32_littlenios2_vec): Declare.
(_bfd_target_vector): Add entries for bfd_elf32_bignios2_vec and
bfd_elf32_littlenios2_vec.
* elf-bfd.h (enum elf_target_id): Add NIOS2_ELF_DATA.
* reloc.c (enum bfd_reloc_code_real): Add Nios II relocations.
* bfd-in2.h: Regenerated.
* libbfd.h: Regenerated.
* cpu-nios2.c: New file.
* elf32-nios2.c: New file.

opcodes/
* Makefile.am (TARGET_LIBOPCODES_CFILES): Add nios2-dis.c and
nios2-opc.c.
* Makefile.in: Regenerated.
* configure.in: Add case for bfd_nios2_arch.
* configure: Regenerated.
* disassemble.c (ARCH_nios2): Define.
(disassembler): Add case for bfd_arch_nios2.
* nios2-dis.c: New file.
* nios2-opc.c: New file.

include/
* dis-asm.h (print_insn_big_nios2): Declare.
(print_insn_little_nios2): Declare.

include/elf
* nios2.h: New file.

include/opcode/
* nios2.h: New file.

gas/
* Makefile.am (TARGET_CPU_CFILES): Add config/tc-nios2.c.
(TARGET_CPU_HFILES): Add config/tc-nios2.h.
* Makefile.in: Regenerated.
* configure.tgt: Add case for nios2*-linux*.
* config/obj-elf.c: Conditionally include elf/nios2.h.
* config/tc-nios2.c: New file.
* config/tc-nios2.h: New file.
* doc/Makefile.am (CPU_DOCS): Add c-nios2.texi.
* doc/Makefile.in: Regenerated.
* doc/all.texi: Set NIOSII.
* doc/as.texinfo (Overview): Add Nios II options.
(Machine Dependencies): Include c-nios2.texi.
* doc/c-nios2.texi: New file.
* NEWS: Note Altera Nios II support.

gas/testsuite/
* gas/nios2/add.d: New.
* gas/nios2/add.s: New.
* gas/nios2/align_fill.d: New.
* gas/nios2/align_fill.s: New.
* gas/nios2/align_text.d: New.
* gas/nios2/align_text.s: New.
* gas/nios2/and.d: New.
* gas/nios2/and.s: New.
* gas/nios2/branch.d: New.
* gas/nios2/branch.s: New.
* gas/nios2/break.d: New.
* gas/nios2/break.s: New.
* gas/nios2/bret.d: New.
* gas/nios2/bret.s: New.
* gas/nios2/cache.d: New.
* gas/nios2/cache.s: New.
* gas/nios2/call26.d: New.
* gas/nios2/call26.s: New.
* gas/nios2/call.d: New.
* gas/nios2/call.s: New.
* gas/nios2/cmp.d: New.
* gas/nios2/cmp.s: New.
* gas/nios2/comments.d: New.
* gas/nios2/comments.s: New.
* gas/nios2/complex.d: New.
* gas/nios2/complex.s: New.
* gas/nios2/ctl.d: New.
* gas/nios2/ctl.s: New.
* gas/nios2/custom.d: New.
* gas/nios2/custom.s: New.
* gas/nios2/etbt.d: New.
* gas/nios2/etbt.s: New.
* gas/nios2/flushda.d: New.
* gas/nios2/flushda.s: New.
* gas/nios2/illegal.l: New.
* gas/nios2/illegal.s: New.
* gas/nios2/jmp.d: New.
* gas/nios2/jmp.s: New.
* gas/nios2/ldb.d: New.
* gas/nios2/ldb.s: New.
* gas/nios2/ldh.d: New.
* gas/nios2/ldh.s: New.
* gas/nios2/ldw.d: New.
* gas/nios2/ldw.s: New.
* gas/nios2/lineseparator.d: New.
* gas/nios2/lineseparator.s: New.
* gas/nios2/mov.d: New.
* gas/nios2/movia.d: New.
* gas/nios2/movia.s: New.
* gas/nios2/movi.d: New.
* gas/nios2/movi.s: New.
* gas/nios2/mov.s: New.
* gas/nios2/mul.d: New.
* gas/nios2/mul.s: New.
* gas/nios2/nios2.exp: New.
* gas/nios2/nor.d: New.
* gas/nios2/nor.s: New.
* gas/nios2/or.d: New.
* gas/nios2/or.s: New.
* gas/nios2/ret.d: New.
* gas/nios2/ret.s: New.
* gas/nios2/rol.d: New.
* gas/nios2/rol.s: New.
* gas/nios2/rotate.d: New.
* gas/nios2/rotate.s: New.
* gas/nios2/stb.d: New.
* gas/nios2/stb.s: New.
* gas/nios2/sth.d: New.
* gas/nios2/sth.s: New.
* gas/nios2/stw.d: New.
* gas/nios2/stw.s: New.
* gas/nios2/sub.d: New.
* gas/nios2/sub.s: New.
* gas/nios2/sync.d: New.
* gas/nios2/sync.s: New.
* gas/nios2/trap.d: New.
* gas/nios2/trap.s: New.
* gas/nios2/tret.d: New.
* gas/nios2/tret.s: New.
* gas/nios2/warn_noat.l: New.
* gas/nios2/warn_noat.s: New.
* gas/nios2/warn_nobreak.l: New.
* gas/nios2/warn_nobreak.s: New.
* gas/nios2/xor.d: New.
* gas/nios2/xor.s: New.

ld/
* Makefile.am (enios2elf.c): New rule.
* Makefile.in: Regenerated.
* configure.tgt: Add case for nios2*-*-*.
* emulparams/nios2elf.sh: New file.
* NEWS: Note Altera Nios II support.

ld/testsuite/
* ld-nios2/emit-relocs-1a.s: New.
* ld-nios2/emit-relocs-1b.s: New.
* ld-nios2/emit-relocs-1.d: New.
* ld-nios2/emit-relocs-1.ld: New.
* ld-nios2/gprel.d: New.
* ld-nios2/gprel.s: New.
* ld-nios2/hilo16.d: New.
* ld-nios2/hilo16.s: New.
* ld-nios2/hilo16_symbol.s: New.
* ld-nios2/imm5.d: New.
* ld-nios2/imm5.s: New.
* ld-nios2/imm5_symbol.s: New.
* ld-nios2/nios2.exp: New.
* ld-nios2/pcrel16.d: New.
* ld-nios2/pcrel16_label.s: New.
* ld-nios2/pcrel16.s: New.
* ld-nios2/relax_callr.d: New.
* ld-nios2/relax_callr.ld: New.
* ld-nios2/relax_callr.s: New.
* ld-nios2/relax_cjmp.d: New.
* ld-nios2/relax_cjmp.s: New.
* ld-nios2/relax_jmp.ld: New.
* ld-nios2/relax_section.d: New.
* ld-nios2/relax_section.s: New.
* ld-nios2/relax_ujmp.d: New.
* ld-nios2/relax_ujmp.s: New.
* ld-nios2/reloc.d: New.
* ld-nios2/reloc.s: New.
* ld-nios2/reloc_symbol.s: New.
* ld-nios2/s16.d: New.
* ld-nios2/s16.s: New.
* ld-nios2/s16_symbol.s: New.
* ld-nios2/u16.d: New.
* ld-nios2/u16.s: New.
* ld-nios2/u16_symbol.s: New.
* ld-elf/indirect.exp: Skip on targets that don't support
-shared -fPIC.
* ld-elfcomm/elfcomm.exp: Build with -G0 for nios2.
* ld-plugin/lto.exp: Skip shared library tests on targets that
don't support them.  Skip execution tests on non-native targets.

binutils/
* readelf.c: Include elf/nios2.h.
(dump_relocations): Add case for EM_ALTERA_NIOS2.
(get_nios2_dynamic_type): New.
(get_dynamic_type): Add case for EM_ALTERA_NIOS2.
(is_32bit_abs_reloc): Fix EM_ALTERA_NIOS2 case.
(is_16bit_abs_reloc): Likewise.
(is_none_reloc): Add EM_ALTERA_NIOS2 and EM_NIOS32 cases.
* NEWS: Note Altera Nios II support.
* MAINTAINERS: Add Nios II maintainers.

daily update

Allow struct 'return' on 32-bit sparc.

gdb/

* sparc-tdep.c (sparc32_return_value): Handle writing return value when
using RETURN_VALUE_ABI_PRESERVES_ADDRESS.
* value.c (struct_return_convention): New function.
(using_struct_return): Implement in terms of struct_return_convention.
* value.h (struct_return_convention): Declare.
* stack.c (return_command): Allow successful overriding of the return
value when RETURN_VALUE_ABI_PRESERVES_ADDRESS.

* python/py-type.c (typy_strip_typedefs): Don't call check_typedef
outside of TRY_CATCH.

Add tests for ELF DT_XXX

* ld-elf/now-1.d: New file.
* ld-elf/now-2.d: Likewise.
* ld-elf/now-3.d: Likewise.
* ld-elf/now-4.d: Likewise.
* ld-elf/rpath-1.d: Likewise.
* ld-elf/rpath-2.d: Likewise.
* ld-elf/runpath-1.d: Likewise.
* ld-elf/runpath-2.d: Likewise.

gdb/doc:

2013-02-06  Yao Qi  <yao@codesourcery.com>

* gdb.texinfo (GDB/MI Async Records): Document new MI
notification "=tsv-modified".  Update the document of MI
notification "=tsv-created".
* observer.texi (GDB Observers): New observer tsv_modified.
Update observer tsv_created and tsv_deleted.

gdb:

2013-02-06  Yao Qi  <yao@codesourcery.com>

* mi/mi-interp.c: Include "tracepoint.h".
(mi_tsv_modified): Declare.
(mi_tsv_created, mi_tsv_deleted): Update declaration.
(mi_interpreter_init): Call observer_attach_tsv_modified.
(mi_tsv_modified): New.
(mi_tsv_created, mi_tsv_deleted): Update.
* tracepoint.c (trace_variable_command): Call
observer_notify_tsv_modified if the initial value of tsv is
changed.
(delete_trace_state_variable): Call
observer_notify_tsv_deleted earlier.
(trace_variable_command): Caller update.
(create_tsv_from_upload): Likewise.
* observer.sh: Declare "struct trace_state_variable".

* NEWS: Mention the new MI notification "=tsv-modified".

gdb/testsuite:

2013-02-06  Yao Qi  <yao@codesourcery.com>

* gdb.trace/mi-tsv-changed.exp (test_create_delete_tsv): Rename
to ...
(test_create_delete_modify_tsv): ... here.  New test on modifying
the initial value of a tsv.

* README: Update coding style link.

*** empty log message ***

* elf32-arm.c (elf32_arm_final_link_relocate): Only test for
stubs in stub_bfd.

PR gas/14255
* config/tc-avr.h (TC_VALIDATE_FIX): Mark symbol used by reloc.
Don't skip fixups with fx_subsy non-NULL.
* config/tc-avr.c (tc_gen_reloc): Don't specially handle fixups
with fx_subsy non-NULL.

daily update

PR go/55969
* configure.ac: Disable libgo on some systems where it does not
work.
* configure: Rebuild.

* emultempl/avrelf.em (avr_elf_before_parse): New function.
(LDEMUL_BEFORE_PARSE): Define.

Revert 2013-02-04, 2013-01-22 and 2013-01-21 changes.

* completer.c (location_completer): Fix typo in comment.

gdb/testsuite/
* gdb.dwarf2/dw2-dir-file-name.exp (cd ${srcabsdir}/rdir): Rename to ...
(cd .../rdir): ... here.

gdb/
* breakpoint.c (add_location_to_breakpoint): Insert the location with
ADDRESS sorted.

Adding AArch64 documentation.

2013-02-05  Yufeng Zhang  <yufeng.zhang@arm.com>

        * gdb.texinfo (AArch64 Features): New section; document
        org.gnu.gdb.aarch64.core and org.gnu.gdb.aarch64.fpu.
        (Architectures): Add new AArch64 section to document AArch64
        architecture specific commands.
        (ABI): Add description of the new OS ABI "Newlib" and its influence
        on the longjmp handling.

* Makefile.am (SOURCE_HFILES): Add `elf-linux-psinfo.h'.
* Makefile.in: Regenerate.

    * aarch64-tdep.c (aarch64_analyze_prologue): ARI fix:
        Refactor if statement to avoid trailing || operator.

2013-02-05  Andreas Tobler  <andreast@fgznet.ch>

* NEWS: Add PowerPC FreeBSD as a new native configuration.

Don't enable new dtags by default with -rpath

ld/

2013-02-04  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/15096
* emultempl/alphaelf.em (alpha_after_parse): Call
gld${EMULATION_NAME}_after_parse instead of after_parse_default.
* emultempl/cr16elf.em (cr16elf_after_parse): Likewise.
* emultempl/crxelf.em (crxelf_after_parse): Likewise.
* emultempl/hppaelf.em (hppaelf_after_parse): Likewise.
* emultempl/mipself.em (mips_after_parse): Likewise.

* emultempl/ia64elf.em (gld${EMULATION_NAME}_after_parse): Renamed
to ...
(gld_${EMULATION_NAME}_after_parse): This.  Call
gld${EMULATION_NAME}_after_parse instead of after_parse_default.
(LDEMUL_AFTER_PARSE): Set to gld_${EMULATION_NAME}_after_parse.

* emultempl/elf32.em (new_dtags_set): New variable.
(gld${EMULATION_NAME}_before_parse): Don't set link_info.new_dtags
here.
(gld${EMULATION_NAME}_after_parse): New function.
(ld_${EMULATION_NAME}_emulation): Replace after_parse_default'
with gld${EMULATION_NAME}_after_parse.
(gld${EMULATION_NAME}_handle_option): Set new_dtags_set to TRUE
when setting link_info.new_dtags.

ld/testsuite/

2013-02-04  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/15096
* ld-elf/new-dtags-1.d: New test.
* ld-elf/new-dtags-2.d: Likewise.
* ld-elf/new-dtags-3.d: Likewise.
* ld-elf/new-dtags-4.d: Likewise.
* ld-elf/new-dtags-5.d: Likewise.
* ld-elf/new-dtags-6.d: Likewise.
* ld-elf/new-dtags-7.d: Likewise.
* ld-elf/new-dtags-8.d: Likewise.

*** empty log message ***

* configure: Regenerate after syncing config/.

daily update

2013-02-04  Andreas Tobler  <andreast@fgznet.ch>

* Makefile.in (ALL_TARGET_OBS): Add powerpc FreeBSD files.
* configure.host: Add powerpc*-*-freebsd* target.
* configure.tgt: Add target info for powerpc*-*-freebsd*.
* ppcfbsd-nat.c, ppcfbsd-tdep.h, ppcfbsd-tdep.c: New files.
* config/powerpc/fbsd.mh: New file.

Add "@c man" markers to doc/c-metag.texi

* doc/c-metag.texi: Add "@c man" markers.

2013-02-04  Sergio Durigan Junior  <sergiodj@redhat.com>
    Denys Vlasenko  <dvlasenk@redhat.com>
    Pedro Alves  <palves@redhat.com>

* gdbarch.sh (elfcore_write_linux_prpsinfo): New F hook.
(struct elf_internal_linux_prpsinfo): Forward declare.
* gdbarch.h, gdbarch.c: Regenerate.
* linux-tdep.c: Include `cli/cli-utils.h'.
(linux_fill_prpsinfo): New function.
(linux_make_corefile_notes): Use linux_fill_prpsinfo.  If there's
an elfcore_write_linux_prpsinfo hook, use it, otherwise, use
elfcore_write_linux_prpsinfo32 or elfcore_write_linux_prpsinfo64
depending on gdbarch pointer bitness.
* ppc-linux-tdep.c: Include elf-bfd.h.
(ppc_linux_init_abi): Hook in elfcore_write_ppc_linux_prpsinfo32
on 32-bit.

2013-02-04  Sergio Durigan Junior  <sergiodj@redhat.com>
    Pedro Alves  <palves@redhat.com>

* Makefile.in (SOURCE_HFILES): Add `elf-linux-psinfo.h'.
* elf-bfd.h (elf_internal_linux_prpsinfo): New structure
declaration.
(elfcore_write_linux_prpsinfo32, elfcore_write_linux_prpsinfo64)
(elfcore_write_ppc32_linux_prpsinfo32): New declarations.
* elf-linux-psinfo.h: New file.
* elf.c: Include elf-linux-psinfo.h.
(elfcore_write_linux_prpsinfo32, elfcore_write_linux_prpsinfo64):
New functions.
* elf32-ppc.c: Include `elf-linux-psinfo.h'.
(elf_external_ppc_linux_prpsinfo32): New structure declaration.
(PPC_LINUX_PRPSINFO32_SWAP_FIELDS): New macro.
(elfcore_write_ppc_linux_prpsinfo32): New function.

AArch64 GDBserver support.

gdb/
        * configure.tgt (aarch64*-*-linux*): Set build_gdbserver=yes.

gdb/gdbserver/

        * Makefile.in (clean): Remove aarch64.c and aarch64-without-fpu.c.
        (aarch64.c, aarch64-without-fpu.c): New targets.
        * configure.srv (aarch64*-*-linux*): New.
        * linux-aarch64-low.c: New file.

Ensure ptrace() calls cast arguments 3 and 4 appropriately.

        * linux-low.c (handle_extended_wait, linux_create_inferior)
        (linux_attach_lwp_1, linux_kill_one_lwp, linux_attach_one_lwp)
        (dequeue_one_deferred_signal, linux_resume_one_thread)
        (fetch_register, linux_write_memory, linux_enable_event_reporting)
        (linux_tracefork_grandchild, linux_test_for_tracefork)
        (linux_read_offsets, linux_xfer_siginfo, linux_xfer_siginfo ): Add
        PTRACE_ARG3_TYPE and PTRACE_ARG4_TYPE cast to ptrace arguments
        where the argument is 0.

2013-02-04  Tristan Gingold  <gingold@adacore.com>

* mach-o.c (bfd_mach_o_scan_start_address): Do not fail if no
start address.

Adding aarch64-newlib-tdep support.

        * aarch64-newlib-tdep.c: New file.
        * configure.tgt: Add aarch64-newlib-tdep.o to gdb_target_obs of
        aarch64*-*-elf.
        * defs.h (enum gdb_osabi): Add GDB_OSABI_NEWLIB.
        * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-newlib-tdep.o.
        (ALLDEPFILES): Add aarch64-newlib-tdep.c.
        * osabi.c (gdb_osabi_names): Add "Newlib".

Adding aarch64-linux-tdep support.

2013-02-04  Jim MacArthur  <jim.macarthur@arm.com>
            Marcus Shawcroft  <marcus.shawcroft@arm.com>
            Nigel Stephens  <nigel.stephens@arm.com>
            Yufeng Zhang  <yufeng.zhang@arm.com>

        * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-linux-tdep.o.
        (ALLDEPFILES): Add aarch64-linux-tdep.c.
        * aarch64-linux-tdep.c: New file.
        * aarch64-linux-tdep.h: New file.
        * aarch64-tdep.h (gdbarch_tdep): Define gregset and fpregset.
        * configure.tgt: Add aarch64-none-linux-gnu.

Add basic support for AArch64.

        * Makefile.in (ALL_64_TARGET_OBS): Add arch64-tdep.o.
        (HFILES_NO_SRCDIR): Add aarch64-tdep.h.
        (ALLDEPFILES): Add aarch64-tdep.c.
        * aarch64-tdep.c: New file.
        * aarch64-tdep.h: New file.
        * configure.tgt: Add AArch64.
        * features/Makefile (WHICH): Add aarch64 and aarch64-without-fpu.
        (aarch64-expedite): New definition.
        * features/aarch64-core.xml: New file.
        * features/aarch64-fpu.xml: New file.
        * features/aarch64-without-fpu.c: New file (generated).
        * features/aarch64-without-fpu.xml: New file.
        * features/aarch64.c: New file (generated).
        * features/aarch64.xml: New file.
        * regformats/aarch64-without-fpu.dat: New file (generated).
        * regformats/aarch64.dat: New file (generated).

* write.c (fixup_segment): Return void.  Delete seg_reloc_count
related code.
(TC_ADJUST_RELOC_COUNT): Delete.
* config/tc-i960.h (TC_ADJUST_RELOC_COUNT): Delete.

* po/POTFILES.in: Regenerate.
* rl78-decode.c: Regenerate.
* rx-decode.c: Regenerate.

* po/POTFILES.in: Regenerate.

* Makefile.am (BFD64_BACKENDS): Remove elf-nacl.lo.
(BFD64_BACKENDS_CFILES): Remove elf-nacl.c.
* Makefile.in: Regenerate.
* po/SRC-POTFILES.in: Regenerate.

include/coff/
* ti.h (SWAP_OUT_RELOC_EXTRA): Define.
bfd/
* coff-tic54x.c (SWAP_OUT_RELOC_EXTRA): Delete.
* coff-tic80.c (SWAP_OUT_RELOC_EXTRA): Delete.

correct pr reference

*** empty log message ***

daily update

gdb/
* contrib/expect-read1.c: New file.
* contrib/expect-read1.sh: New file.

gdb/
* dwarf2read.c (file_file_name): New function with code from
file_full_name.
(file_full_name): Move most of the code to file_file_name.
(macro_start_file): Rename variable full_name to file_name and use
file_file_name for it.  Add comp_dir parameter to new_macro_table.
* macrocmd.c (show_pp_source_pos): New variable fullname.  Replace any
macro_source_file->filename access by macro_source_fullname call.
* macroscope.c (_initialize_macroscope): Update the new_macro_table
caller.
* macrotab.c (struct macro_table): New field comp_dir.
(macro_include): New variables link_fullname and source_fullname.
Replace any macro_source_file->filename access by macro_source_fullname
call.
(macro_lookup_inclusion): Remove the partial filenames checking code.
(check_for_redefinition): New variables source_fullname and
found_key_fullname.  Replace any macro_source_file->filename access by
macro_source_fullname call.
(macro_undef): New variables source_fullname and key_fullname.  Replace
any macro_source_file->filename access by macro_source_fullname call.
(macro_lookup_definition): New variables retval and source_fullname.
Replace any macro_source_file->filename access by macro_source_fullname
call.
(foreach_macro): New variable key_fullname.  Replace any
macro_source_file->filename access by macro_source_fullname call.
(foreach_macro_in_scope): New variable datum_fullname.  Replace any
macro_source_file->filename access by macro_source_fullname call.
(new_macro_table): Add parameter comp_dir.  Initialize T with it.
(macro_source_fullname): New function.
* macrotab.h (struct macro_source_file): Extent the filename field
comment.
(new_macro_table): New parameter comp_dir, add a comment for it.
(macro_source_fullname): new declaration.

gdb/testsuite/
* gdb.linespec/base/one/header.h: New file.
* gdb.linespec/base/two/header.h: New file.
* gdb.linespec/macro-relative.c: New file.
* gdb.linespec/macro-relative.exp: New file.

gdb/
* dwarf2read.c (dw2_map_symtabs_matching_filename): Move variable
this_real_name to outer block.  Use it also for
compare_filenames_for_search.
(dw2_expand_symtabs_matching): New variable this_real_name.  Use it
with dw2_get_real_path for file_matcher, considering also
BASENAMES_MAY_DIFFER.
(file_full_name): Prepend COMP_DIR even for relative lh->INCLUDE_DIRS.

gdb/
* dwarf2read.c (dw2_expand_symtabs_matching): Add basenames parameter
to the file_matcher parameter.  Pass 0 to it.
(dwarf2_create_include_psymtab): Copy also DIRNAME.
* psymtab.c (partial_map_symtabs_matching_filename): Drop handling of
NULL psymtab_to_fullname result.
(psymtab_to_fullname): Remove variable r.  Never return NULL, assemble
an expected filename instead.
(expand_symtabs_matching_via_partial): Add basenames parameter to the
file_matcher parameter.  Call also psymtab_to_fullname, after newly
considering BASENAMES_MAY_DIFFER.
* source.c (rewrite_source_path): Remove static.
* source.h (rewrite_source_path): New declaration.
* symfile.h (struct quick_symbol_functions): Add basenames parameter to
the expand_symtabs_matching field.  Comment it.
* symtab.c (file_matches): New function comment.  Add parameter
basenames, implement it.
(search_symbols_file_matches): Add basenames parameter.  Update the
file_matches caller.
(search_symbols): Match FILES also against symtab_to_fullname.
Optimize it for BASENAMES_MAY_DIFFER.

gdb/testsuite/
* gdb.base/fullpath-expand-func.c: New file.
* gdb.base/fullpath-expand.c: New file.
* gdb.base/fullpath-expand.exp: New file.
* gdb.base/realname-expand-real.c: New file.
* gdb.base/realname-expand.c: New file.
* gdb.base/realname-expand.exp: New file.

gdb/
* source.c (print_source_lines_base): Print for TUI also "fullname".
* tui/tui-data.c (init_content_element): Change tui_locator_element
field to full_name.
* tui/tui-data.h (struct tui_locator_element): Likewise.
* tui/tui-disasm.c (tui_show_disassem_and_update_source): Rename
tui_update_locator_filename calls to tui_update_locator_fullname.
Replace symtab->filename refererence by symtab_to_fullname call.
* tui/tui-out.c (tui_field_string): Check for "fullname" now.
* tui/tui-source.c (tui_set_source_content): Change tui_locator_element
field to full_name.  Replace symtab->filename refererence by
symtab_to_fullname call.
(tui_show_symtab_source): Rename parameter to fullname.  Change
tui_locator_element field to full_name.
* tui/tui-stack.c: Include source.h.
(tui_set_locator_filename): Rename the declaration to ...
(tui_set_locator_fullname): ... here.  Rename its parameter to
fullname, updates its comment.
(tui_set_locator_info): Rename its parameter to fullname.
(tui_set_locator_filename): Rename the definition to ...
(tui_set_locator_fullname): ... here.  Rename its parameter to
fullname, updates its comment.  Change tui_locator_element field to
full_name.
(tui_set_locator_info): Rename its parameter to fullname.
(tui_set_locator_info): Rename callee to tui_set_locator_fullname.
(tui_update_locator_filename): Rename to ...
(tui_update_locator_fullname): ... here. Rename callee to
tui_set_locator_fullname.
(tui_show_frame_info): Replace symtab->filename refererence by
symtab_to_fullname call.
* tui/tui-stack.h (tui_update_locator_filename): Rename to ...
(tui_update_locator_fullname): ... here.
* tui/tui-winsource.c (tui_display_main): Rename the callee to
tui_update_locator_fullname.  Replace symtab->filename refererence by
symtab_to_fullname call.
* tui/tui.c (tui_show_source): Rename its parameter to fullname.
Rename the callee to tui_update_locator_fullname.
* tui/tui.h (tui_show_source): Rename its parameter to fullname.

gdb/
* ada-lang.c (user_select_syms): Replace symtab->filename refererences
by symtab_to_filename_for_display calls.
* breakpoint.c (print_breakpoint_location, resolve_sal_pc): Likewise.
(clear_command): New variable sal_fullname, initialize it.  Replace
compare_filenames_for_search by filename_cmp with sal_fullname.
(say_where, update_static_tracepoint): Replace symtab->filename
refererences by symtab_to_filename_for_display calls.
* cli/cli-cmds.c (edit_command, list_command, ambiguous_line_spec):
Likewise.
* dwarf2read.c: Include source.h.
(fixup_go_packaging): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* linespec.c (add_sal_to_sals): Rename variable filename to fullname.
Replace symtab->filename refererences by symtab_to_filename_for_display
calls.
(create_sals_line_offset, convert_linespec_to_sals): New variable
fullname, initialize it, replace symtab->filename reference by the
variable.
* linux-fork.c: Include source.h.
(info_checkpoints_command): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* macroscope.c (sal_macro_scope): Replace symtab->filename refererences
by symtab_to_filename_for_display calls.
* mdebugread.c: Include source.h.
(psymtab_to_symtab_1): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file)
(mi_cmd_file_list_exec_source_files): Likewise.
* printcmd.c: Include source.h.
(build_address_symbolic): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* psymtab.c (partial_map_symtabs_matching_filename)
(read_psymtabs_with_fullname): Call compare_filenames_for_search also
with psymtab_to_fullname.
* python/py-symtab.c (stpy_str): Replace symtab->filename refererences
by symtab_to_filename_for_display calls.
(stpy_get_filename): New variable filename, initialize it, use instead
of symtab->filename refererences.
(salpy_str): Make variable filename const char *.  Replace
symtab->filename refererences by symtab_to_filename_for_display calls.
* skip.c: Include source.h and filenames.h.
(skip_file_command): Remove const from the symtab variable.  Replace
symtab->filename refererences by symtab_to_fullname call.
(function_name_is_marked_for_skip): New variables searched_for_fullname
and fullname.  Use them to search also with symtab's fullname.
* source.c (find_source_lines): Replace symtab->filename refererences
by symtab_to_filename_for_display calls.
(print_source_lines_base): New variable filename, use it instead of
symtab->filename.  Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
(line_info, forward_search_command): Replace symtab->filename
refererences by symtab_to_filename_for_display calls.
(reverse_search_command): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.  New variable filename for it.
* stack.c (frame_info): Likewise.
* symmisc.c: Include source.h.
(dump_objfile, dump_symtab_1, maintenance_print_symbols)
(maintenance_info_symtabs): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* symtab.c (iterate_over_some_symtabs): Call
compare_filenames_for_search also with symtab_to_fullname.
(lookup_symbol_aux_quick, basic_lookup_transparent_type_quick): Replace
symtab->filename refererences by symtab_to_filename_for_display calls.
(find_line_symtab): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
(file_matches): Replace filename_cmp by compare_filenames_for_search.
(print_symbol_info): Make the last parameter const char *.  New
variable s_filename.  Use it in the function.
(symtab_symbol_info): Make the last_filename variable const char *.
Replace symtab->filename refererences by symtab_to_filename_for_display
calls.
(rbreak_command): New variable fullname.  Use it.  Replace
symtab->filename refererence by symtab_to_filename_for_display call.
* tracepoint.c (set_traceframe_context, trace_find_line_command)
(print_one_static_tracepoint_marker): Replace symtab->filename
refererences by symtab_to_filename_for_display calls.
* tui/tui-source.c (tui_set_source_content): New variables filename and
s_filename.  Replace symtab->filename refererences by this variable.
Replace other symtab->filename refererences by
symtab_to_filename_for_display calls.

gdb/
Add a new variable that controls a way in which filenames are
displayed.
* NEWS (set filename-display): New entry.
* source.c (filename_display_basename, filename_display_relative)
(filename_display_absolute, filename_display_kind_names)
(filename_display_string, show_filename_display_string)
(symtab_to_filename_for_display): New.
(_initialize_source): Added initialization of 'filename-display'
variable.
* source.h (symtab_to_filename_for_display): Added declaration.
* stack.c (print_frame): Added new variable and calling of a new
function and condition with this variable. Changed third argument of
calling of a function.

gdb/doc/
* gdb.texinfo (Backtrace): Added description of 'filename-display'
variable in 'set/show backtrace' section.

gdb/testsuite/
* gdb.dwarf2/dw2-dir-file-name.exp: New file.
* gdb.dwarf2/dw2-dir-file-name.c: New file.

gdb/
* tui/tui-data.c (init_win_info, tui_del_window, tui_free_window):
Rename field reference filename to fullname.
* tui/tui-data.h (struct tui_source_info): Rename field filename to
fullname.  New comment for it.
* tui/tui-source.c (tui_set_source_content): Rename field reference
filename to fullname.  Initialize field by symtab_to_fullname now.
* tui/tui-winsource.c (tui_update_breakpoint_info): Rename field
reference filename to fullname.  Use symtab_to_fullname during
comparison.

gdb/
Code cleanup.
* dwarf2read.c (dw2_expand_symtabs_with_filename): Rename to ...
(dw2_expand_symtabs_with_fullname): ... here.  Rename parameter
filename to fullname.  Rename variable this_name to this_fullname.
Lowercase FILENAME_CMP call.
(dw2_find_symbol_file): New comment for the returned string.
(dwarf2_gdb_index_functions): Rename the function to
dw2_expand_symtabs_with_fullname.
* psymtab.c (read_psymtabs_with_filename): Rename to ...
(read_psymtabs_with_fullname): ... here.  Rename parameter filename to
fullname.
(psym_functions): Rename the function to read_psymtabs_with_fullname.
* symfile.h (struct quick_symbol_functions): Rename field
expand_symtabs_with_filename to expand_symtabs_with_fullname and its
parameter filename to fullname.  Document returned string meaning for
find_symbol_file.
* symtab.c (find_line_symtab): Rename the called function to
expand_symtabs_with_fullname.

gdb/
Code cleanup.
* breakpoint.c (clear_command): Remove variable is_abs, unify the
call of filename_cmp with compare_filenames_for_search.
* dwarf2read.c (dw2_map_symtabs_matching_filename): Remove variable
is_abs, unify the call of FILENAME_CMP with
compare_filenames_for_search.  New gdb_asserts for real_path and name.
Unify the call of compare_filenames_for_search with FILENAME_CMP.
* psymtab.c (partial_map_symtabs_matching_filename): Likewise.
* symfile.h (struct quick_symbol_functions): Extend the comment for
map_symtabs_matching_filename.
* symtab.c (compare_filenames_for_search): Remove the function comment
relative path requirement.  Handle absolute filenames, with a comment.
(iterate_over_some_symtabs): Remove variable is_abs, unify the call of
FILENAME_CMP with compare_filenames_for_search.  New gdb_asserts for
real_path and name.  Unify the call of compare_filenames_for_search
with FILENAME_CMP.
(iterate_over_symtabs): New gdb_assert on REAL_PATH.

gdb/testsuite/
* gdb.mi/mi-fullname-deleted.exp: Use double last slash for $srcfileabs.
(compare_filenames_for_search does not match)
(compare_filenames_for_search does match): New tests.

gdb/
Code cleanup.
* breakpoint.c (print_breakpoint_location): Replace bp_location field
source_file references by symtab field references.  Remove variables
sal and fullname.
(momentary_breakpoint_from_master, add_location_to_breakpoint):
(clear_command, say_where): Replace bp_location field source_file
references by symtab field references.
(bp_location_dtor): Remove the source_file reference.
(update_static_tracepoint): Replace bp_location field source_file
references by symtab field references.
(breakpoint_free_objfile): New function.
* breakpoint.h (struct bp_location): Extend the comment for line_number.
Replace the field source_file by field symtab, extend its comment.
(breakpoint_free_objfile): New declaration.
* objfiles.c (free_objfile): Call breakpoint_free_objfile.
* tui/tui-winsource.c (tui_update_breakpoint_info): Replace bp_location
field source_file references by symtab field references.

gdb/
Replace xfullpath calls by gdb_realpath calls.
* cli/cli-cmds.c (find_and_open_script): Remove xfullpath from the
function comment.
* dwarf2read.c (dw2_map_expand_apply): Remove parameter full_path.
Remove it from the iterate_over_some_symtabs call.
(dw2_map_symtabs_matching_filename): Remove parameter full_path.
Remove it from the dw2_map_expand_apply calls, remove a block handling
it.
* psymtab.c (partial_map_expand_apply): Remove parameter full_path.
Remove it from the iterate_over_some_symtabs call.
(partial_map_symtabs_matching_filename): Remove parameter full_path.
Remove it from the partial_map_expand_apply calls, remove a block
handling it.  Drop gdb_realpath call and cleanups from the real_path
handling.
* source.c (openp): Drop the comment part about xfullpath.  Replace
xfullpath calls by gdb_realpath calls.
(find_and_open_source): Replace xfullpath call by gdb_realpath call.
* symfile.h (struct quick_symbol_functions): Remove parameter full_path
from method map_symtabs_matching_filename and its comment.
* symmisc.c (maintenance_print_msymbols): Replace xfullpath call by
gdb_realpath call.
* symtab.c (iterate_over_some_symtabs): Remove parameter full_path,
remove it also from the function comment, remove a block handling it.
Drop gdb_realpath call and cleanups from the real_path handling.
(iterate_over_symtabs): Drop variable full_path and its use.
* symtab.h (iterate_over_some_symtabs): Remove parameter full_path.
* utils.c (xfullpath): Remove.
* utils.h (xfullpath): Remove.

gdb/testsuite/
* gdb.gdb/xfullpath.exp: Replace xfullpath calls by gdb_realpath calls.

*** empty log message ***

daily update

gdb/testsuite/
* lib/java.exp (compile_java_from_source): Initialize ARGS as a list.

*** empty log message ***

daily update

Add missing file from the previous commit.

2013-02-01  Andreas Tobler  <andreast@fgznet.ch>

* Makefile.in (ALL_TARGET_OBS): Add ppc64-tdep.o.
(HFILES_NO_SRCDIR): Add ppc64-tdep.h.
(ALLDEPFILES): Add ppc64-tdep.c.
* configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
ppc64-tdep.o to gdb_target_obs.
* ppc64-tdep.h: New file.
* ppc64-tdep.c: New file.
(insn_d, insn_ds, insn_xfx, ppc64_desc_entry_point): Move from
ppc-linux-tdep.c to here.
(PPC64_STANDARD_LINKAGE1_LEN, PPC64_STANDARD_LINKAGE2_LEN)
(PPC64_STANDARD_LINKAGE2_LEN): Likewise and use ARRAY_SIZE macro.
(ppc64_standard_linkage1_target, ppc64_standard_linkage2_target)
(ppc64_standard_linkage3_target, ppc64_skip_trampoline_code): Move
from ppc-linux-tdep.c to here.
(ppc64_convert_from_func_ptr_addr): Rename from
ppc64_linux_convert_from_func_ptr_addr to
ppc64_convert_from_func_ptr_addr and move from ppc-linux-tdep.c to
here.
* rs6000-tdep.c:
(read_insn): Move from ppc-linux-tdep.c to here.
(insns_match_pattern, insn_d_field, insn_ds_field): Move
from ppc-linux-tdep.c to here and rename them with the ppc_ prefix.
* ppc-linux-tdep.c: Include ppc64-tdep.h.
Removed above functions.
(ppc_linux_init_abi): Adjust.

2013-02-01  Aleksandar Ristovski  <aristovski@qnx.com>

        * ada-valprint.c (ada_print_floating): Remove unused 'len'.

Reference: http://sourceware.org/ml/gdb-patches/2013-01/msg00732.html

2013-02-01  Aleksandar Ristovski  <aristovski@qnx.com>

        * ada-lang.c (assign_aggregate): Remove unused 'is_array_aggregate'.

Reference: http://sourceware.org/ml/gdb-patches/2013-01/msg00732.html

Garbage collect deprecated_pc_in_call_dummy

I noticed there are no users of deprecated_pc_in_call_dummy left in
the tree.

The last user was ARM.  Usage removed here:

http://sourceware.org/ml/gdb-patches/2010-03/msg00820.html

This deletes the function.

2013-02-01  Pedro Alves  <palves@redhat.com>

* dummy-frame.c (deprecated_pc_in_call_dummy): Delete function.
* frame.h (deprecated_pc_in_call_dummy): Delete declaration.

gdb/
* elfread.c (elf_symfile_read): Limit separate debug info additions to
files with no separate debug info.
* objfiles.c (add_separate_debug_objfile): Add gdb_assert calls.
* symfile.c (read_symbols): Call find_separate_debug_file_in_section
only for files with no separate debug info.

gdb/testsuite/
* gdb.base/gnu-debugdata.exp): Create ${binfile}.debug,
${binfile}.mini_debuginfo-debuglink, add -k to xz, use now
${binfile}.mini_debuginfo-debuglink and
${binfile}.mini_debuginfo-debuglink.xz.

* gdb.dwarf2/method-ptr.exp: Use correct form for non-string
attributes.

2013-02-01  Jan Kratochvil  <jan.kratochvil@redhat.com>
    Tom Tromey  <tromey@redhat.com>

* gdb.dwarf2/method-ptr.exp: Link with c++.
* lib/dwarf.exp (Dwarf::assemble): Declare _cu_count.

* elf64-ppc.c (dec_dynrel_count): Don't error when elf_gc_sweep_symbol
clears def_regular.

*** empty log message ***

daily update