memstick: add support for legacy memorysticks

Based partially on MS standard spec quotes from Alex Dubov.

As any code that works with user data this driver isn't recommended to use
to write cards that contain valuable data.

It tries its best though to avoid data corruption and possible damage to
the card.

Tested on MS DUO 64 MB card on Ricoh R592 card reader.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/memstick/host/rtsx_pci_ms.c: remove unnecessary platform_set_drvdata()

The driver core clears the driver data to NULL after device_release or on
probe failure.  Thus, it is not needed to manually clear the device driver
data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/pps/clients/pps-gpio.c: remove unnecessary platform_set_drvdata()

The driver core clears the driver data to NULL after device_release or on
probe failure.  Thus, it is not needed to manually clear the device driver
data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pktcdvd: fix defective misuses of pkt_<level>

Fix thinkos where pkt_<level> needs a valid pktcdvd_device * and the
pointer is known to be NULL.

Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> (go smatch!)
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pktcdvd: add struct pktcdvd_device * to pkt_dump_sense()

Allow the device name to be emitted with pkt_err when logging the sense
data.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pktcdvd: convert pr_info to pkt_info

Add a new pkt_info macro to prefix the name to the logging output.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pktcdvd: convert pr_notice to pkt_notice

Add a new pkt_notice macro to prefix the name to the logging output.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pktcdvd: add struct pktcdvd_device.name to pr_err logging where possible

Add a new pkt_err macro to prefix the name to the logging output.  Convert
pr_err where there is a non-null struct pktcdvd_device.

Includes improvements from Andy Shevchenko.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pktcdvd: add struct pktcdvd_device * to pkt_dbg

Add pd->name to output for these debugging messages.

Remove normally compiled out pkt_dbg(2, ...) function entry tracing
equivalents as it's better done via the function tracer.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pktcdvd: consolidate DPRINTK and VPRINTK macros

Use the more common pkt_dbg(level, fmt, ...) form.

These messages are emitted at KERN_NOTICE.

Always emit function name with pkt_dbg(2, ...) uses and remove the
sometimes abbreviated embedded function name.

This form always verifies the format and arguments.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pktcdvd: convert printk to pr_<level>

Use a more current logging style and add messages levels to the logging
messages.

Simplify pkt_dump_sense by using %*ph and adding a simple function to emit
the sense string.

Includes improvements from Andy Shevchenko and Dan Carpenter.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pktcdvd: convert ZONE macro to static function get_zone()

Macros should be converted to functions where feasible to
verify arguments and the like.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

panic: call panic handlers before kmsg_dump

Since the panic handlers may produce additional information (via printk)
for the kernel log, it should be reported as part of the panic output
saved by kmsg_dump().  Without this re-ordering, nothing that adds
information to a panic will show up in pstore's view when kmsg_dump runs,
and is therefore not visible to crash reporting tools that examine pstore
output.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Vikram Mulukutla <markivx@codeaurora.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

affs: use loff_t in affs_truncate()

It seems pretty unlikely that AFFS supports files over 4GB but we may as
well leave use loff_t just for cleanness sake instead of truncating it to
32 bits.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Marco Stornelli <marco.stornelli@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: remove do-nothing NAME="%k" term from example udev rules

When the example udev rules in the documentation are used without
modification, warnings like the one shown below appear in the system logs:

  /var/log/messages:Aug 22 11:09:11 kung udevd[445]: NAME="%k" \
    is superfluous and breaks kernel supplied names, please remove \
    it from /etc/udev/rules.d/60-aoe.rules:26

Removing the term does not cause any problems with the creation of the
special character and block device nodes.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: do not BUG if memory pressure prevented debugfs file creation

If the system has trouble allocating memory for the creation of the aoe
debugfs directory or of a file inside it, the debugfs member of an aoedev
can be NULL.

Do not treat a NULL debugfs pointer as a BUG on aoedev shutdown, avoiding
the user impact of an unecessary panic.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: suppress compiler warnings

This patch fixes following compiler warnings:

  drivers/block/aoe/aoecmd.c: In function `aoecmd_ata_rw':
  drivers/block/aoe/aoecmd.c:383:17: warning: variable `t' set but not used [-Wunused-but-set-variable]
    struct aoetgt *t;
                   ^
  drivers/block/aoe/aoecmd.c: In function `resend':
  drivers/block/aoe/aoecmd.c:488:21: warning: variable `ah' set but not used [-Wunused-but-set-variable]
    struct aoe_atahdr *ah;
                       ^

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: remove custom implementation of kbasename()

In the kernel we have a nice helper that may be used here. This patch
substitutes the custom implementation by the native function call.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: update internal version number to 85

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: update copyright date

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: fill in per-AoE-target information for debugfs file

This information is presented in a compact format that has evolved for
easy routine scanning by expert humans, mostly developers and support
technicians helping to troubleshoot or test AoE-based systems.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: provide file operations for debugfs files

The place holder in the file contents is filled out in the following
patch.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: add AoE-target files to debugfs

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: create and destroy debugfs directory for aoe

This series adds the debugging information that the coraid.com-distributed
aoe driver exports via sysfs, but instead of sysfs, it uses debugfs.

With these patches applied, even without AoE targets on the network, KEDR
reports new possible memory leaks, but these are from callers outside the
aoe driver that have used aoe_devnode to get the name of the character
devices through the aoe_class->devnode callback, and I believe they're
responsible for freeing that memory.

This patch:

Create and destroy the debugfs directory.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/zswap: use postorder iteration when destroying rbtree

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Reviewed-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rbtree: allow tests to run as builtin

No reason require rbtree test code to be a module, allow it to be builtin
(streamlines my development process)

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Reviewed-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rbtree_test: add test for postorder iteration

Just check that we examine all nodes in the tree for the postorder
iteration.

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Reviewed-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rbtree: add rbtree_postorder_for_each_entry_safe() helper

Because deletion (of the entire tree) is a relatively common use of the
rbtree_postorder iteration, and because doing it safely means fiddling
with temporary storage, provide a helper to simplify postorder rbtree
iteration.

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Reviewed-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rbtree: add postorder iteration functions

Postorder iteration yields all of a node's children prior to yielding the
node itself, and this particular implementation also avoids examining the
leaf links in a node after that node has been yielded.

In what I expect will be its most common usage, postorder iteration allows
the deletion of every node in an rbtree without modifying the rbtree nodes
(no _requirement_ that they be nulled) while avoiding referencing child
nodes after they have been "deleted" (most commonly, freed).

I have only updated zswap to use this functionality at this point, but
numerous bits of code (most notably in the filesystem drivers) use a hand
rolled postorder iteration that NULLs child links as it traverses the
tree.  Each of those instances could be replaced with this common
implementation.

1 & 2 add rbtree postorder iteration functions.
3 adds testing of the iteration to the rbtree runtime tests
4 allows building the rbtree runtime tests as builtins
5 updates zswap.

This patch:

Add postorder iteration functions for rbtree.  These are useful for safely
freeing an entire rbtree without modifying the tree at all.

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Reviewed-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

block/partitions/efi.c: consistently use pr_foo()

Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Karel Zak <kzak@redhat.com>
Cc: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

partitions/efi: some style cleanups

Trivial coding style cleanups - still plenty left.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Karel Zak <kzak@redhat.com>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

partitions/efi: delete annoying emacs style comments

I love emacs, but these settings for coding style are annoying when trying
to open the efi.h file.  More important, we already have checkpatch for
that.

Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Karel Zak <kzak@redhat.com>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

partitions/efi: compare first and last usable LBAs

When verifying GPT header integrity, make sure that first usable LBA is
smaller than last usable LBA.

Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Karel Zak <kzak@redhat.com>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

partitions/efi: account for pmbr size in lba

The partition that has the 0xEE (GPT protective), must have the size in
lba field set to the lesser of the size of the disk minus one or
0xFFFFFFFF for larger disks.

Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Karel Zak <kzak@redhat.com>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

partitions/efi: detect hybrid MBRs

One of the biggest problems with GPT is compatibility with older, non-GPT
systems.  The problem is addressed by creating hybrid mbrs, an extension,
or variant, of the traditional protective mbr.  This contains, apart from
the 0xEE partition, up three additional primary partitions that point to
the same space marked by up to three GPT partitions.  The result is that
legacy OSs can see the three required MBR partitions and at the same time
ignore the GPT-aware partitions that protect the GPT structures.

While hybrid MBRs are hacks, workarounds and simply not part of the GPT
standard, they do exist and we have no way around them.  For instance, by
default, OSX creates a hybrid scheme when using multi-OS booting.

In order for Linux to properly discover protective MBRs, it must be made
aware of devices that have hybrid MBRs.  No functionality is changed by
this patch, just a debug message informing the user of the MBR scheme that
is being used.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Karel Zak <kzak@redhat.com>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

partitions/efi: do not require gpt partition to begin at sector 1

When detecting a valid protective MBR, the Linux kernel isn't picky about
the partition (1-4) the 0xEE is at, but, unlike other operating systems,
it does require it to begin at the second sector (sector 1).  This check,
apart from it not being enforced by UEFI, and causing Linux to potentially
fail to detect any *valid* partitions on the disk, can present problems
when dealing with hybrid MBRs[1].

For compatibility reasons, if the first partition is hybridized, the 0xEE
partition must be small enough to ensure that it only protects the GPT
data structures - as opposed to the the whole disk in a protective MBR.
This problem is very well described by Rod Smith[1]: where MBR-only
partitioning programs (such as older versions of fdisk) can see some of
the disk space as unallocated, thus loosing the purpose of the 0xEE
partition's protection of GPT data structures.

By dropping this check, this patch enables Linux to be more flexible when
probing for GPT disklabels.

[1] http://www.rodsbooks.com/gdisk/hybrid.html#reactions

Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Karel Zak <kzak@redhat.com>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

partitions/efi: check pmbr record's starting lba

Per the UEFI Specs 2.4, June 2013, the starting lba of the partition that
has the EFI GPT (0xEE) must be set to 0x00000001 - this is obviously the
LBA of the GPT Partition Header.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Karel Zak <kzak@redhat.com>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

partitions/efi: use lba-aware partition records

The kernel's GPT implementation currently uses the generic 'struct
partition' type for dealing with legacy MBR partition records.  While this
is is useful for disklabels that we designed for CHS addressing, such as
msdos, it doesn't adapt well to newer standards that use LBA instead, such
as GUID partition tables.  Furthermore, these generic partition structures
do not have all the required fields to properly follow the UEFI specs.

While a CHS address can be translated to LBA, it's much simpler and
cleaner to just replace the partition type.  This patch adds a new
'gpt_record' type that is fully compliant with EFI and will allow, in the
next patches, to add more checks to properly verify a protective MBR,
which is paramount to probing a device that makes use of GPT.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Karel Zak <kzak@redhat.com>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s390/vmcore: use vmcore for zfcpdump

Modify the s390 copy_oldmem_page() and remap_oldmem_pfn_range() function
for zfcpdump to read from the HSA memory if memory below HSA_SIZE bytes is
requested.  Otherwise real memory is used.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Willeke <willeke@de.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vmcore: enable /proc/vmcore mmap for s390

The patch "s390/vmcore: Implement remap_oldmem_pfn_range for s390" allows
now to use mmap also on s390.

So enable mmap for s390 again.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Willeke <willeke@de.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s390/vmcore: implement remap_oldmem_pfn_range for s390

Introduce the s390 specific way to map pages from oldmem.  The memory area
below OLDMEM_SIZE is mapped with offset OLDMEM_BASE.  The other old memory
is mapped directly.

Signed-off-by: Jan Willeke <willeke@de.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vmcore: introduce remap_oldmem_pfn_range()

For zfcpdump we can't map the HSA storage because it is only available via
a read interface.  Therefore, for the new vmcore mmap feature we have
introduce a new mechanism to create mappings on demand.

This patch introduces a new architecture function remap_oldmem_pfn_range()
that should be used to create mappings with remap_pfn_range() for oldmem
areas that can be directly mapped.  For zfcpdump this is everything
besides of the HSA memory.  For the areas that are not mapped by
remap_oldmem_pfn_range() a generic vmcore a new generic vmcore fault
handler mmap_vmcore_fault() is called.

This handler works as follows:

* Get already available or new page from page cache (find_or_create_page)
* Check if /proc/vmcore page is filled with data (PageUptodate)
* If yes:
  Return that page
* If no:
  Fill page using __vmcore_read(), set PageUptodate, and return page

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Willeke <willeke@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s390/vmcore: use ELF header in new memory feature

Exchange the old relocate mechanism with the new arch function call
override mechanism that allows to create the ELF core header in the 2nd
kernel.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Willeke <willeke@de.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vmcore: introduce ELF header in new memory feature

For s390 we want to use /proc/vmcore for our SCSI stand-alone dump
(zfcpdump).  We have support where the first HSA_SIZE bytes are saved into
a hypervisor owned memory area (HSA) before the kdump kernel is booted.
When the kdump kernel starts, it is restricted to use only HSA_SIZE bytes.

The advantages of this mechanism are:

 * No crashkernel memory has to be defined in the old kernel.
 * Early boot problems (before kexec_load has been done) can be dumped
 * Non-Linux systems can be dumped.

We modify the s390 copy_oldmem_page() function to read from the HSA memory
if memory below HSA_SIZE bytes is requested.

Since we cannot use the kexec tool to load the kernel in this scenario,
we have to build the ELF header in the 2nd (kdump/new) kernel.

So with the following patch set we would like to introduce the new
function that the ELF header for /proc/vmcore can be created in the 2nd
kernel memory.

The following steps are done during zfcpdump execution:

1.  Production system crashes
2.  User boots a SCSI disk that has been prepared with the zfcpdump tool
3.  Hypervisor saves CPU state of boot CPU and HSA_SIZE bytes of memory into HSA
4.  Boot loader loads kernel into low memory area
5.  Kernel boots and uses only HSA_SIZE bytes of memory
6.  Kernel saves registers of non-boot CPUs
7.  Kernel does memory detection for dump memory map
8.  Kernel creates ELF header for /proc/vmcore
9.  /proc/vmcore uses this header for initialization
10. The zfcpdump user space reads /proc/vmcore to write dump to SCSI disk
    - copy_oldmem_page() copies from HSA for memory below HSA_SIZE
    - copy_oldmem_page() copies from real memory for memory above HSA_SIZE

Currently for s390 we create the ELF core header in the 2nd kernel with a
small trick.  We relocate the addresses in the ELF header in a way that
for the /proc/vmcore code it seems to be in the 1st kernel (old) memory
and the read_from_oldmem() returns the correct data.  This allows the
/proc/vmcore code to use the ELF header in the 2nd kernel.

This patch:

Exchange the old mechanism with the new and much cleaner function call
override feature that now offcially allows to create the ELF core header
in the 2nd kernel.

To use the new feature the following function have to be defined
by the architecture backend code to read from new memory:

 * elfcorehdr_alloc: Allocate ELF header
 * elfcorehdr_free: Free the memory of the ELF header
 * elfcorehdr_read: Read from ELF header
 * elfcorehdr_read_notes: Read from ELF notes

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Willeke <willeke@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kexec: remove unnecessary return

Code can not run here forever, so remove the unnecessary return.

Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Suggested-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Reviewed-by: Simon Horman <horms@verge.net.au>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exec: cleanup the error handling in search_binary_handler()

The error hanling and ret-from-loop look confusing and inconsistent.

- "retval >= 0" simply returns

- "!bprm->file" returns too but with read_unlock() because
   binfmt_lock was already re-acquired

- "retval != -ENOEXEC || bprm->mm == NULL" does "break" and
  relies on the same check after the main loop

Consolidate these checks into a single if/return statement.

need_retry still checks "retval == -ENOEXEC", but this and -ENOENT before
the main loop are not needed.  This is only for pathological and
impossible list_empty(&formats) case.

It is not clear why do we check "bprm->mm == NULL", probably this
should be removed.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Zach Levis <zml@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exec: don't retry if request_module() fails

A separate one-liner for better documentation.

It doesn't make sense to retry if request_module() fails to exec
/sbin/modprobe, add the additional "request_module() < 0" check.

However, this logic still doesn't look exactly right:

1. It would be better to check "request_module() != 0", the user
   space modprobe process should report the correct exit code.
   But I didn't dare to add the user-visible change.

2. The whole ENOEXEC logic looks suboptimal. Suppose that we try
   to exec a "#!path-to-unsupported-binary" script. In this case
   request_module() + "retry" will be done twice: first by the
   "depth == 1" code, and then again by the "depth == 0" caller
   which doesn't make sense.

3. And note that in the case above bprm->buf was already changed
   by load_script()->prepare_binprm(), so this looks even more
   ugly.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Zach Levis <zml@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exec: cleanup the CONFIG_MODULES logic

search_binary_handler() uses "for (try=0; try<2; try++)" to avoid "goto"
but the code looks too complicated and horrible imho.  We still need to
check "try == 0" before request_module() and add the additional "break"
for !CONFIG_MODULES case.

Kill this loop and use a simple "bool need_retry" + "goto retry".  The
code looks much simpler and we do not even need ifdef's, gcc can optimize
out the "if (need_retry)" block if !IS_ENABLED().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Zach Levis <zml@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exec: kill ->load_binary != NULL check in search_binary_handler()

search_binary_handler() checks ->load_binary != NULL for no reason, this
method should be always defined.  Turn this check into WARN_ON() and move
it into __register_binfmt().

Also, kill the function pointer.  The current code looks confusing, as if
->load_binary can go away after read_unlock(&binfmt_lock).  But we rely on
module_get(fmt->module), this fmt can't be changed or unregistered,
otherwise this code is buggy anyway.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Zach Levis <zml@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exec: move allow_write_access/fput to exec_binprm()

When search_binary_handler() succeeds it does allow_write_access() and
fput(), then it clears bprm->file to ensure the caller will not do the
same.

We can simply move this code to exec_binprm() which is called only once.
In fact we could move this to free_bprm() and remove the same code in
do_execve_common's error path.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Zach Levis <zml@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exec: proc_exec_connector() should be called only once

A separate one-liner with the minor fix.

PROC_EVENT_EXEC reports the "exec" event, but this message is sent at
least twice if search_binary_handler() is called by ->load_binary()
recursively, say, load_script().

Move it to exec_binprm(), this is "depth == 0" code too.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Zach Levis <zml@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exec: kill "int depth" in search_binary_handler()

Nobody except search_binary_handler() should touch ->recursion_depth, "int
depth" buys nothing but complicates the code, kill it.

Probably we should also kill "fn" and the !NULL check, ->load_binary
should be always defined.  And it can not go away after read_unlock() or
this code is buggy anyway.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Zach Levis <zml@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exec: introduce exec_binprm() for "depth == 0" code

task_pid_nr_ns() and trace/ptrace code in the middle of the recursive
search_binary_handler() looks confusing and imho annoying.  We only need
this code if "depth == 0", lets add a simple helper which calls
search_binary_handler() and does trace_sched_process_exec() +
ptrace_event().

The patch also moves the setting of task->did_exec, we need to do this
only once.

Note: we can kill either task->did_exec or PF_FORKNOEXEC.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Zach Levis <zml@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: make proc_fd_permission() thread-friendly

proc_fd_permission() says "process can still access /proc/self/fd after it
has executed a setuid()", but the "task_pid() = proc_pid() check only
helps if the task is group leader, /proc/self points to
/proc/<leader-pid>.

Change this check to use task_tgid() so that the whole thread group can
access its /proc/self/fd or /proc/<tid-of-sub-thread>/fd.

Notes:
- CLONE_THREAD does not require CLONE_FILES so task->files
  can differ, but I don't think this can lead to any security
  problem. And this matches same_thread_group() in
  __ptrace_may_access().

- /proc/self should probably point to /proc/<thread-tid>, but
  it is too late to change the rules. Perhaps it makes sense
  to add /proc/thread though.

Test-case:

void *tfunc(void *arg)
{
assert(opendir("/proc/self/fd"));
return NULL;
}

int main(void)
{
pthread_t t;
pthread_create(&t, NULL, tfunc, NULL);
pthread_join(t, NULL);
return 0;
}

fails if, say, this executable is not readable and suid_dumpable = 0.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/proc/task_mmu.c: check the return value of mpol_to_str()

mpol_to_str() may fail, and not fill the buffer (e.g. -EINVAL), so need
check about it, or buffer may not be zero based, and next seq_printf()
will cause issue.

The failure return need after mpol_cond_put() to match get_vma_policy().

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation/filesystems/proc.txt: fix mistake in the description of Committed_AS

Fix mistake in the description of Committed_AS in kernel documentation.

Signed-off-by: Minto Joseph <mvaliyav@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/file_table.c:fput(): make comment more truthful

Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

coredump: add new %P variable in core_pattern

Add a new %P variable to be used in core_pattern.  This variable contains
the global PID (PID in the init namespace) as %p contains the PID in the
current namespace which isn't always what we want.

The main use for this is to make it easier to handle crashes that happened
within a container.  With that new variables it's possible to have the
crashes dumped into the container or forwarded to the host with the right
PID (from the host's point of view).

Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Reported-by: Hans Feldt <hans.feldt@ericsson.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Andy Whitcroft <apw@canonical.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

__ptrace_may_access() should not deny sub-threads

__ptrace_may_access() checks get_dumpable/ptrace_has_cap/etc if task !=
current, this can can lead to surprising results.

For example, a sub-thread can't readlink("/proc/self/exe") if the
executable is not readable.  setup_new_exec()->would_dump() notices that
inode_permission(MAY_READ) fails and then it does
set_dumpable(suid_dumpable).  After that get_dumpable() fails.

(It is not clear why proc_pid_readlink() checks get_dumpable(), perhaps we
could add PTRACE_MODE_NODUMPABLE)

Change __ptrace_may_access() to use same_thread_group() instead of "task
== current".  Any security check is pointless when the tasks share the
same ->mm.

Signed-off-by: Mark Grondona <mgrondona@llnl.gov>
Signed-off-by: Ben Woodard <woodard@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hfsplus: integrate POSIX ACLs support into driver

Integrate implemented POSIX ACLs support into hfsplus driver.

Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hfsplus: implement POSIX ACLs support

Implement POSIX ACLs support in hfsplus driver.

Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hfsplus: add necessary declarations for POSIX ACLs support

This patchset implements POSIX ACLs support in hfsplus driver.

Mac OS X beginning with version 10.4 ("Tiger") support NFSv4 ACLs, which
are part of the NFSv4 standard.  HFS+ stores ACLs in the form of
specially named extended attributes (com.apple.system.Security).

But this patchset doesn't use "com.apple.system.Security" extended
attributes.  It implements support of POSIX ACLs in the form of extended
attributes with names "system.posix_acl_access" and
"system.posix_acl_default".  These xattrs are treated only under Linux.
POSIX ACLs doesn't mean something under Mac OS X.  Thereby, this patch
set provides opportunity to use POSIX ACLs under Linux on HFS+
filesystem.

This patch:

Add CONFIG_HFSPLUS_FS_POSIX_ACL kernel configuration option, DBG_ACL_MOD
debugging flag and acl.h file with declaration of essential functions
for support POSIX ACLs in hfsplus driver.

Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: simplify devm_request_mem_region/devm_ioremap

Convert the composition of devm_request_mem_region and devm_ioremap to a
single call to devm_ioremap_resource.  The associated call to
platform_get_resource is also simplified and moved next to the new call
to devm_ioremap_resource.

This was done using a combination of the semantic patches
devm_ioremap_resource.cocci and devm_request_and_ioremap.cocci, found in
the scripts/coccinelle/api directory.

In rtc-lpc32xx.c and rtc-mv.c, the local variable size is no longer needed.

In rtc-ds1511.c the size field of the local structure is not useful any
more, and is deleted.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-ds1742.c: report to RTC core if retrieved time is invalid

Let RTC core decide if the retrieved time is invalid, instead of
processing errors in the driver.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-ds1742.c: remove unused field "rtc" from private structure

Private field "rtc" is not used outside "probe", so there is no reason to
keep it.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-ds1742.c: use devm_ioremap_resource()

Replace devm_request_mem_region() and devm_ioremap() with
devm_ioremap_resource().

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-sirfsoc.c: fix kernel warning during wakeup

enable_irq_wake() might fail, if so, we will see kernel warning in resume
entries due to it always calls disable_irq_wake().

  WARNING: at kernel/irq/manage.c:529 irq_set_irq_wake+0xc4/0xf0()
  Unbalanced IRQ 52 wake disable
  Modules linked in: ipv6 libcomposite configfs
  CPU: 0 PID: 1591 Comm: ash Tainted: G        W    3.10.0-00854-gdbd86d4-dirty #100
    (unwind_backtrace+0x0/0xf8) from (show_stack+0x10/0x14)
    (show_stack+0x10/0x14) from (warn_slowpath_common+0x54/0x68)
    (warn_slowpath_common+0x54/0x68) from (warn_slowpath_fmt+0x30/0x40)
    (warn_slowpath_fmt+0x30/0x40) from (irq_set_irq_wake+0xc4/0xf0)
    (irq_set_irq_wake+0xc4/0xf0) from (sirfsoc_rtc_restore+0x30/0x38)
    (sirfsoc_rtc_restore+0x30/0x38) from (platform_pm_restore+0x2c/0x50)
    (platform_pm_restore+0x2c/0x50) from (dpm_run_callback.clone.6+0x30/0xb0)
    (dpm_run_callback.clone.6+0x30/0xb0) from (device_resume+0x88/0x134)
    (device_resume+0x88/0x134) from (dpm_resume+0x114/0x230)
    (dpm_resume+0x114/0x230) from (hibernation_snapshot+0x178/0x1d0)
    (hibernation_snapshot+0x178/0x1d0) from (hibernate+0x130/0x1dc)
    (hibernate+0x130/0x1dc) from (state_store+0xb4/0xc0)
    (state_store+0xb4/0xc0) from (kobj_attr_store+0x14/0x20)
    (kobj_attr_store+0x14/0x20) from (sysfs_write_file+0xfc/0x17c)
    (sysfs_write_file+0xfc/0x17c) from (vfs_write+0xc8/0x194)
    (vfs_write+0xc8/0x194) from (SyS_write+0x40/0x6c)
    (SyS_write+0x40/0x6c) from (ret_fast_syscall+0x0/0x30)

To avoid unbalanced "IRQ wake disable", ensure that disable_irq_wake() is
called only when enable_irq_wake() have been successfully enabled.

Signed-off-by: Xianglong Du <Xianglong.Du@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-nuc900.c: use NULL instead of 0

check_rtc_access_enable() returns pointer, thus NULL should be used
instead of 0 in order to fix the following sparse warning:

  drivers/rtc/rtc-nuc900.c:102:16: warning: Using plain integer as NULL pointer

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-max77686.c: Fix wrong register

Fix a read of the wrong register when checking whether the RTC timer has
reached the alarm time.

Signed-off-by: Sangjung Woo <sangjung.woo@samsung.com>
Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com>
Reviewed-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-hid-sensor-time.c: improve error handling when rtc register fails

Stop processing hid input when registering the RTC fails and handle a NULL
returned from devm_rtc_device_register() as a failure too.

Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-palmas.c: support for backup battery charging

Palmas series device like TPS65913, TPS80036 supports the backup battery
for powering the RTC when no other energy source is available.

The backup battery is optional, connected to the VBACKUP pin, and can be
nonrechargeable or rechargeable.  The rechargeable battery can be charged
from the system supply using the backup battery charger.

Add support for enabling charging of this backup battery.  Also add the DT
binding document and the new properties to have this support.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-omap.c: add rtc wakeup support to alarm events

On some platforms (like AM33xx), a special register (RTC_IRQWAKEEN) is
available to enable Alarm Wakeup feature.  This register needs to be
properly handled for the rtcwake to work properly.

Platforms using such IP should set "ti,am3352-rtc" in rtc device dt
compatibility node.

Signed-off-by: Hebbar Gururaja <gururaja.hebbar@ti.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Rob Landley <rob@landley.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: add MOXA ART RTC driver

Add RTC driver for MOXA ART SoCs.

Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com>
Reviewed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-pcf2127.c: remove empty function

The 'remove' function is empty and does not do anything.  Delete it.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-hid-sensor-time.c: add module alias to let the module load automatically

In order to get the module automatically loaded by hotplug mechanisms a
MODULE_DEVICE_TABLE is needed.

Therefore add one.

This makes it also possible to use a module name other than
HID-SENSOR-2000a0 which isn't very descriptive in kernel messages.

Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s390/kprobes: add support for pc-relative long displacement instructions

With the general-instruction extension facility (z10) a couple of
instructions with a pc-relative long displacement were introduced.  The
kprobes support for these instructions however was never implemented.

In result, if anybody ever put a probe on any of these instructions the
result would have been random behaviour after the instruction got executed
within the insn slot.

So lets add the missing handling for these instructions.  Since all of the
new instructions have 32 bit signed displacement the easiest solution is
to allocate an insn slot that is within the same 2GB area like the
original instruction and patch the displacement field.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kprobes: allow to specify custom allocator for insn caches

The current two insn slot caches both use module_alloc/module_free to
allocate and free insn slot cache pages.

For s390 this is not sufficient since there is the need to allocate insn
slots that are either within the vmalloc module area or within dma memory.

Therefore add a mechanism which allows to specify an own allocator for an
own insn slot cache.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kprobes: unify insn caches

The current kpropes insn caches allocate memory areas for insn slots
with module_alloc().  The assumption is that the kernel image and module
area are both within the same +/- 2GB memory area.

This however is not true for s390 where the kernel image resides within
the first 2GB (DMA memory area), but the module area is far away in the
vmalloc area, usually somewhere close below the 4TB area.

For new pc relative instructions s390 needs insn slots that are within
+/- 2GB of each area.  That way we can patch displacements of
pc-relative instructions within the insn slots just like x86 and
powerpc.

The module area works already with the normal insn slot allocator,
however there is currently no way to get insn slots that are within the
first 2GB on s390 (aka DMA area).

Therefore this patch set modifies the kprobes insn slot cache code in
order to allow to specify a custom allocator for the insn slot cache
pages.  In addition architecure can now have private insn slot caches
withhout the need to modify common code.

Patch 1 unifies and simplifies the current insn and optinsn caches
        implementation. This is a preparation which allows to add more
        insn caches in a simple way.

Patch 2 adds the possibility to specify a custom allocator.

Patch 3 makes s390 use the new insn slot mechanisms and adds support for
        pc-relative instructions with long displacements.

This patch (of 3):

The two insn caches (insn, and optinsn) each have an own mutex and
alloc/free functions (get_[opt]insn_slot() / free_[opt]insn_slot()).

Since there is the need for yet another insn cache which satifies dma
allocations on s390, unify and simplify the current implementation:

- Move the per insn cache mutex into struct kprobe_insn_cache.
- Move the alloc/free functions to kprobe.h so they are simply
  wrappers for the generic __get_insn_slot/__free_insn_slot functions.
  The implementation is done with a DEFINE_INSN_CACHE_OPS() macro
  which provides the alloc/free functions for each cache if needed.
- move the struct kprobe_insn_cache to kprobe.h which allows to generate
  architecture specific insn slot caches outside of the core kprobes
  code.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

firmware/dmi_scan: drop OOM messages

As reported by Joe Perches: OOM messages generally aren't useful.
dmi_alloc is either a trivial front-end to kzalloc, and kzalloc already
does a dump_stack() when OOM, or for x86, dmi_alloc uses extend_brk
which BUGs when unsuccessful.

So we can remove all 6 such log messages in the dmi_scan driver, to
shrink the binary size (by 528 bytes on x86_64.)

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reported-by: Joe Perches <joe@perches.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

firmware/dmi_scan: constify strings

Add const to all DMI string pointers where this is possible.  This fixes a
checkpatch warning.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Joe Perches <joe@perches.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

firmware/dmi_scan: fix most checkpatch errors and warnings

Fix all errors and trivial warnings reported by checkpatch for file
drivers/firmware/dmi_scan.c.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Joe Perches <joe@perches.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

firmware/dmi_scan: drop obsolete comment

This comment predates the introduction of early_ioremap.  Since then the
missing calls to dmi_iounmap have been added by Ingo and Yinghai in
commits 0d64484f7ea1 ("x86: fix DMI ioremap leak") and 3212bff370c2
("x86: left over fix for leak of early_ioremp in dmi_scan") .  That was
over 5 years ago so it is about time to drop this now misleading
comment.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

epoll: add a reschedule point in ep_free()

ep_free() might iterate on a huge set of epitems and hold cpu too long.
Add two cond_resched() in order to yield cpu to other tasks.  This is safe
as we only hold mutexes in this function.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Theodore Ts'o <tytso@mit.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add test for positional misuse of section specifiers like __initdata

As discussed recently on the arm [1] and lm-sensors [2] lists, it is
possible to use section markers on variables in a way which gcc doesn't
understand (or at least not the way the developer intended):

static struct __initdata samsung_pll_clock exynos4_plls[nr_plls] = {

does NOT put exynos4_plls in the .initdata section.  The __initdata marker
can be virtually anywhere on the line, EXCEPT right after "struct".  The
preferred location is before the "=" sign if there is one, or before the
trailing ";" otherwise.

[1] http://permalink.gmane.org/gmane.linux.ports.arm.kernel/258149
[2] http://lists.lm-sensors.org/pipermail/lm-sensors/2013-August/039836.html

So, update checkpatch to find these misuses and report an error when it's
immediately after struct or union, and a warning when it's otherwise not
immediately before the ; or =.

A similar patch was suggested by Andi Kleen
https://lkml.org/lkml/2013/8/5/648

Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: fix perl version 5.12 and earlier incompatibility

A previous patch ("checkpatch: add --types option to report only
specific message types") uses a perl syntax introduced in perl version
5.14.

Use the backward compatible perl syntax instead.

Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: reduce runtime/cpu time used

There are some cases where checkpatch can take a long time to complete.
Reduce the likelihood of this long run-time by adding a new test for lines
with and without comments and eliminating checks on lines with only
comments.

This reduces the number of "ctx_statement_block" calls, and also the
number of tests of $stat, which is now undefined for these blank lines.

One test in particular, the "check for switch/default statements without a
break", could take an extremely long time to parse as it tries to skip
interleaving comments within the ctx_statement_block/$stat and that could
be done multiple times unnecessarily.

A small test case taken from cfg80211.h before this patch would take
1000's of seconds to run, now it's just a couple seconds.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: better --fix of SPACING errors.

Previous attempt at fixing SPACING errors could make a hash of several
defects.

This patch should make --fix be a lot better at correcting these defects.

Trim left and right sides of these defects appropriately instead of a
somewhat random attempt at it.

Trim left spaces from any following bit of the modified line when only a
single space is required around an operator.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Phil Carmody <phil.carmody@partner.samsung.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: ignore #define TRACE_<foo> macros

The tracing subsystem uses slightly odd #defines to set path/directory
locations for include files.

These #defines can cause false positives for the complex macro tests so
add exclusions for these specific #defines (TRACE_SYSTEM,
TRACE_INCLUDE_FILE, TRACE_INCLUDE_PATH).

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add --types option to report only specific message types

Add a --types convenience option to show only specific message types.
Combined with the --fix option, this can produce specific suggested
formatting patches to files.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: fix networking kernel-doc block comment defect

checkpatch can generate a false positive when inserting a new kernel-doc
block and function above an existing kernel-doc block.

Fix it by checking that the context line is also a newly inserted line.

Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: warn when using extern with function prototypes in .h files

Using the extern keyword on function prototypes is superfluous visual
noise so suggest removing it.

Using extern can cause unnecessary line wrapping at 80 columns and
unnecessarily long multi-line function prototypes.

Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: check for duplicate signatures

Emit a warning when a signature is used more than once.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: enforce sane perl version

I got a bug report from a couple of users who said checkpatch.pl was
broken for them.  It was erroring out on fairly random lines most commonly
with messages like:

Nested quantifiers in regex; marked by <--HERE in m/(\((?:[^\(\)]++ <-- HERE |(?-1))*\))/ at ./checkpatch.pl line 340.

The bug reporter was running a version of perl 5.8 which was end-of-lifed
in 2008: http://www.cpan.org/src/.  Versions of perl this old are at
_best_ quite untested.  At worst, they are crusty and known to be
completely broken.

If folks have a system _that_ old, then we should have mercy on them and
give them a half-decent error message rather than fail with nutty error
messages.

This patch enforces that checkpatch.pl is run with perl 5.10, which was
end-of-lifed in 2009.  The new --ignore-perl-version command-line switch
will let folks override this if they want.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: check CamelCase by word, not by $Lval

$Lval is a test for complete name (ie: foo->bar.Baz[1])

If any of this is CamelCase, then the current test uses the entire $Lval.
This isn't optimal because it can emit messages with foo->bar.Baz and
bar.Baz when Baz is a variable specified in an include file.

So instead, break the $Lval into words and check each word for CamelCase
uses.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add a few more --fix corrections

Suggest a few more single-line corrections.

Remove DOS line endings
Simplify removing trailing whitespace
Remove global/static initializations to 0/NULL
Convert pr_warning to pr_warn
Add space after brace
Convert binary constants to hex
Remove whitespace after line continuation
Use inline not __inline or __inline__
Use __printf and __scanf
Use a single ; for statement terminations
Convert __FUNCTION__ to __func__

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/decompressors: fix "no limit" output buffer length

When decompressing into memory, the output buffer length is set to some
arbitrarily high value (0x7fffffff) to indicate the output is, virtually,
unlimited in size.

The problem with this is that some platforms have their physical memory at
high physical addresses (0x80000000 or more), and that the output buffer
address and its "unlimited" length cannot be added without overflowing.
An example of this can be found in inflate_fast():

/* next_out is the output buffer address */
out = strm->next_out - OFF;
/* avail_out is the output buffer size. end will overflow if the output
 * address is >= 0x80000104 */
end = out + (strm->avail_out - 257);

This has huge consequences on the performance of kernel decompression,
since the following exit condition of inflate_fast() will be always true:

} while (in < last && out < end);

Indeed, "end" has overflowed and is now always lower than "out".  As a
result, inflate_fast() will return after processing one single byte of
input data, and will thus need to be called an unreasonably high number of
times.  This probably went unnoticed because kernel decompression is fast
enough even with this issue.

Nonetheless, adjusting the output buffer length in such a way that the
above pointer arithmetic never overflows results in a kernel decompression
that is about 3 times faster on affected machines.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Jon Medhurst <tixy@linaro.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/crc32: update the comments of crc32_{be,le}_generic()

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/genalloc.c: correct dev_get_gen_pool documentation

The documentation mentions a "name" parameter, which does not exist.  This
commit removes such mention from the function documentation.

Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: append "/" to directory patterns

It's clearer to have patterns marked as directories.

Change the directory patterns without terminating slashes.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add mach-bcm and drivers

Add ownership to maintainers file for the mach-bcm related files,
including drivers that are used for the SoCs defined in mach-bcm.

Signed-off-by: Christian Daudt <csd@broadcom.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>