iio: frequency: adf4350: cast value to unsigned to make code checkers happy

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio:triggers:interrupt trigger - move out of staging.

This is now a very simple trigger indeed but useful in many common cases.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>

staging:iio:triggers:interrupt trigger - one per platform device.

Switching from one platform device registering a lot of triggers
to one for each trigger simplifies the code somewhat. It would be
relatively unusual to have more than a couple of such devices
registered so this change will not result in much additional overhead.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>

staging:iio:triggers: rename iio-trig-gpio to iio-trig-interrupt

Also change all internal naming appropriately.
This trigger is no longer just for gpio provided interrupts so
change the naming to reflect this.  Also drop some now missleading
left over comments.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>

staging:iio:trigger:gpio bug in release of gpio in error path

Also dropped the unneeded gpio.h header.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>

iio: at91_adc: Add missing CONFIG_OF macro

The data structure is required only when DT is enabled.
Hence compile it conditionally.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: replace strict_strtoul() with kstrtoul()

The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: MIPS: add Octeon USB HCD support

Add support for Octeon USB HCD. Tested on EdgeRouter Lite with USB
mass storage.

The driver has been extracted from GPL sources of EdgeRouter Lite firmware
(based on Linux 2.6.32.13). Some minor fixes and cleanups have been done
to make it work with 3.10-rc3.

$ uname -a
Linux (none) 3.10.0-rc3-edge-00005-g86cb5bc #41 SMP PREEMPT Sat Jun 1 20:41:46 EEST 2013 mips64 GNU/Linux
$ modprobe octeon-usb
[   37.971683] octeon_usb: module is from the staging directory, the quality is unknown, you have been warned.
[   37.983649] OcteonUSB: Detected 1 ports
[   37.999360] OcteonUSB OcteonUSB.0: Octeon Host Controller
[   38.004847] OcteonUSB OcteonUSB.0: new USB bus registered, assigned bus number 1
[   38.012332] OcteonUSB OcteonUSB.0: irq 122, io mem 0x00000000
[   38.019970] hub 1-0:1.0: USB hub found
[   38.023851] hub 1-0:1.0: 1 port detected
[   38.028101] OcteonUSB: Registered HCD for port 0 on irq 122
[   38.391443] usb 1-1: new high-speed USB device number 2 using OcteonUSB
[   38.586922] usb-storage 1-1:1.0: USB Mass Storage device detected
[   38.597375] scsi0 : usb-storage 1-1:1.0
[   39.604111] scsi 0:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 4
[   39.619113] sd 0:0:0:0: [sda] 7579008 512-byte logical blocks: (3.88 GB/3.61 GiB)
[   39.630696] sd 0:0:0:0: [sda] Write Protect is off
[   39.635945] sd 0:0:0:0: [sda] No Caching mode page present
[   39.641464] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   39.651341] sd 0:0:0:0: [sda] No Caching mode page present
[   39.656917] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   39.664296]  sda: sda1 sda2
[   39.675574] sd 0:0:0:0: [sda] No Caching mode page present
[   39.681093] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   39.687223] sd 0:0:0:0: [sda] Attached SCSI removable disk

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Daney <ddaney.cavm@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: btmtk_usb: use GFP_KERNEL inplace of GFP_ATOMIC in _probe path

the _probe function doesn't run in interrupt context, so no need to use
the GFP_ATOMIC allocations, instead driver can request for GFP_KERNEL

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: winbond: Check for unsuccessful allocation immediately

Check to see if allocation by kzalloc() or usb_alloc_urb() was unsuccessful
immediately after the allocation. Exit from the function can be right at that
point in case of allocation failure.
This avoids unnecessary use of usb_alloc_urb() & usb_free_urb() if kzalloc()
returns NULL.
Also, makes the code better structured & easier to understand.

Signed-off-by: Harsh Kumar <harsh1kumar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dwc2: remove redundant D0 power state set

Pci_enable_device() will set device power state to D0,
so it's no need to do it again in dwc2_driver_probe().

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: crystalhd: remove an unneeded NULL check

We already established earlier in the function that "temp" is
non-NULL.  We also don't need to set to NULL because it's a stack
variable an we return immediately.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5139: Use correct USB transfer interval to fix syslog spamming

Using correct transfer interval as specified by the USB endpoint
when doing the interrupt transfer fixes the warning printed by
xhci USB core on every transfer that resulted in spamming
"xhci_queue_intr_tx: 74 callbacks suppressed" to syslog
every 5 seconds.

Signed-off-by: Marcus Overhagen <marcus.overhagen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5139: Fix SD card detection on Samsung NP730U3E Ultrabook

The timeout detection implemented in this driver isn't very
robust. Although the USB interrupt transfer was successful,
the polling thread often reported timeouts because the 50ms
had expired before it got scheduled, and the SD card wasn't
detected. Increasing it to 100ms, as used in other places of
this driver, makes it work.

Signed-off-by: Marcus Overhagen <marcus.overhagen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: fix return value check in libcfs_sock_ioctl()

In case of error, the function sock_alloc_file() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: clean up and remove libcfs/linux/linux-mem.c

Those are simple wrappers for numa allocator. We don't need them.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: remove empty file libcfs/linux/linux-lock.c

It was emptied by coan. So drop it.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: remove libcfs/linux/linux-utils.c

It is not used any more.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: remove empty file libcfs/linux/linux-sync.c

It was emptied by coan. So we no longer need it.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: silence gcc build warning

got bellow build warning that is indeed a false alarm.

  CC [M]  drivers/staging/lustre/lustre/llite/llite_nfs.o
  drivers/staging/lustre/lustre/libcfs/nidstrings.c: In function ‘
  libcfs_str2net_internal’:
  drivers/staging/lustre/lustre/libcfs/nidstrings.c:432:17: warning: ‘nf’ may be
  used uninitialized in this function [-Wuninitializ
  ed]

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: clean up and remove libcfs/linux/linux-fs.c

filp_user_write() is open coded in libcfs_kkuc_msg_put(). All
other functions/macros have no user at all. So we can remove
the file.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: llite: add module alias

So that sys_mount can find and load lustre module automatically.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: silence lockdep warning in ll_md_blocking_ast

Got bellow lockdep warning during tests. It is false alarm though.

[ 1184.479097] =============================================
[ 1184.479187] [ INFO: possible recursive locking detected ]
[ 1184.479277] 3.10.0-rc3+ #13 Tainted: G         C
[ 1184.479355] ---------------------------------------------
[ 1184.479444] mkdir/2215 is trying to acquire lock:
[ 1184.479521]  (&(&dentry->d_lock)->rlock){+.+...}, at: [<ffffffffa06cc27c>] ll_md_blocking_ast+0x55c/0x655 [lustre]
[ 1184.479801]
but task is already holding lock:
[ 1184.479895]  (&(&dentry->d_lock)->rlock){+.+...}, at: [<ffffffffa06cc1b1>] ll_md_blocking_ast+0x491/0x655 [lustre]
[ 1184.480101]
other info that might help us debug this:
[ 1184.480206]  Possible unsafe locking scenario:

[ 1184.480300]        CPU0
[ 1184.480340]        ----
[ 1184.480380]   lock(&(&dentry->d_lock)->rlock);
[ 1184.480458]   lock(&(&dentry->d_lock)->rlock);
[ 1184.480536]
 *** DEADLOCK ***

[ 1184.480761]  May be due to missing lock nesting notation

[ 1184.480936] 4 locks held by mkdir/2215:
[ 1184.481037]  #0:  (sb_writers#11){.+.+.+}, at: [<ffffffff811531a9>] mnt_want_write+0x24/0x4b
[ 1184.481273]  #1:  (&type->i_mutex_dir_key#3/1){+.+.+.}, at: [<ffffffff81144fce>] kern_path_create+0x8c/0x144
[ 1184.481513]  #2:  (&sb->s_type->i_lock_key#19){+.+...}, at: [<ffffffffa06cc180>] ll_md_blocking_ast+0x460/0x655 [lustre]
[ 1184.481778]  #3:  (&(&dentry->d_lock)->rlock){+.+...}, at: [<ffffffffa06cc1b1>] ll_md_blocking_ast+0x491/0x655 [lustre]
[ 1184.482050]

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: remove empty file lustre/ptlrpc/nrs_orr.c

It is used by server only and we had it emptied with coan.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/osc: check ostid if no OBD_CONNECT_FID

in lustre_set_wire_obdo, if "ocd->ocd_connect_flags" doesn't contain
OBD_CONNECT_FID, use "ost_id" to check the type of the object
instead of using ost_id.oi_fid only.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3360
Lustre-change: http://review.whamcloud.com/6426
Signed-off-by: Hongchao Zhang <hongchao.zhang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Reviewed-by: wangdi <di.wang@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/tests: check nr_local in ofd_preprw()

This patch checks the number of bulk I/O RPC pages with
PTLRPC_MAX_BRW_PAGES in ofd_preprw() to avoid
LASSERT(iobuf->dr_npages < iobuf->dr_max_pages) occurring
while larger I/O size is specified.

The patch also fixes echo_client_prep_commit() to reuse
the env context so as to avoid LASSERT(info->fti_exp == NULL)
occurring while the bulk I/O size is larger than
PTLRPC_MAX_BRW_SIZE.

The patch also improves obdfilter-survey to handle the
case while interoprating with old server.

[picked echo client part for upstream kernel submission]
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2598
Lustre-change: http://review.whamcloud.com/6394
Signed-off-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/osc: fixed a typo in osc_cache_truncate_start

Dump osc_extent waiting instead of ext in case error occurred.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3359
Lustre-change: http://review.whamcloud.com/6402
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: Always build 64bit ino internally

Always build 64bit ino internally except the client is mounted
with "32bitapi" option, so client will always use 64bit ino
internally. It will build 32bit ino, only if application requires
32 bit ino.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3318
Lustre-change: http://review.whamcloud.com/6371
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/mdt: set ATTR_xTIME_SET to make atime update properly

To make atime update properly between 1.8 client and 2.x server,
this patch includes the following fixes:
- if MDS_ATTR_xTIME is set without MDS_ATTR_xTIME_SET and the client
  does not have OBD_CONNECT_FULL20, convert it to LA_xTIME in
  mdt_setattr_unpack().
- set both MDS_ATTR_xTIME | MDS_ATTR_xTIME_SET for timestamps in
  ll_prepare_close(). This allows us to fix the server-side timestamp
  setting in the future.
- remove attr_unpack() and convert the flags from MDS_ATTR_ to LA_*
  directly in mdt_attr_valid_xlate() instead.
- improve sanityn.sh test_23().

[picked llite part for upstream kernel submission]
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3036
Lustre-change: http://review.whamcloud.com/6327
Signed-off-by: Liu Ying <emoly.liu@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/changelog: fix CL_LAYOUT comment, string

Fix the CL_LAYOUT comment, since it is possible that layout swap
could be used in cases where the file content is changed.  I don't
think there are any real world use cases for this, but that depends
on what tools are being used on the filesystem.

Also change the "LAYOUT" string for this ChangeLog record type to
be "LYOUT" to match the convention of other strings to only be
5 characters long.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3279
Lustre-change: http://review.whamcloud.com/6338
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ost: Ensure dirty flushed on fiemap ioctl

Data corruption is possible if cp(coreutils) uses FIEMAP to obtain
data holes in shared file, since there could be dirty cache on
other clients which hasn't been flushed back.

To ensure all the dirty on remote clients being flushed back on
fiemap ioctl, we'd acquire ldlm lock on server side for fiemap,
unless the local client (which invoke fiemap) has cached lock.

[picked osc part for upstream kernel submission]
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3219
Xyratex-bug-id: MRP-1001
Lustre-change: http://review.whamcloud.com/6127
Signed-off-by: Artem Blagodarenko <artem_blagodarenko@xyratex.com>
Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/changelog: fix CL_LAYOUT, accept all types

In order to avoid compatibility issues with older ChangeLog consumers,
change the new CL_LAYOUT record to use the value previously assigned
to CL_IOCTL.  The CL_IOCTL type was never used anywhere, and it didn't
really make any sense as a ChangeLog record, since it could really
mean anything at all.

The changelog_show_cb() function is renamed to changelog_kkuc_cb(),
since it is really about consuming the ChangeLog and passing it up to
the kernel-user-coms interface.  At some point we should consider to
implement a DBUS-based ChangeLog interface as well.

The changelog_kkuc_cb() "sanity check" on cr_type was removed, since
there is no reason the client kernel needs to know every record type
that is being passed to userspace.  It is up to the client tool to
determine what records that it can process.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3279
Lustre-change: http://review.whamcloud.com/6308
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Aurelien Degremont <aurelien.degremont@cea.fr>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/lprocfs: use stats counter index for *pos

In lprocfs_stats_seq_{start,next,show,stop}() encode the counter index
(rather than the counter address) into *pos. Doing so simplifies these
functions and fixes a bug in the case of per-CPU stats where no stats
would be displayed at all if no events had yet occurred on CPU 0.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2979
Lustre-change: http://review.whamcloud.com/6328
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: wangdi <di.wang@intel.com>
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Emoly Liu <emoly.liu@intel.com>
Reviewed-by: Keith Mannthey <keith.mannthey@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ost: check pre 2.4 echo client in obdo validation

Because old echo client still uses o_id/o_seq for objid,
but new echo client will uses FID for the objid. Add
OBD_CONNECT_FID for 2.4 echo client, so 2.4 OST will
convert o_id/o_seq to FID if the request from old echo
client.

Add local flag OBD_FL_OSTID for o_flags to indicate
OST does not support FID yet, then echo client will
still send o_id/o_seq to OST.

cleanup ost_validate_obdo

[picked client part for upstream kernel submission]
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3187
Lustre-change: http://review.whamcloud.com/6287
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llog: Do not use ostid swab for llogid

Since logid still use id/seq format in the request,
it will be swabbed by its own swab func, instead of
using ostid swab, which might see logid as FID incorrectly.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3302
Lustre-change: http://review.whamcloud.com/6305
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-by: John Hammond <johnlockwoodhammond@gmail.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obdclass: use common way to store lastid

Local files last id are stored in root in files named seq-xxx-lastid
while lastid for OST objects is stored in O/seq/LAST_ID special
object with zero OID and handled by OSD.
Patch reworks local files lastid to be stored in O/seq/LAST_ID too
and using the same format.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2886
Lustre-change: http://review.whamcloud.com/6199
Signed-off-by: Mikhail Pershin <mike.pershin@intel.com>
Signed-off-by: James Nunez <james.a.nunez@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/lov: only dump header in lsm_lmm_verify

If lsm_lmm_verify_*() find an error in the lov_mds_md header
structure, don't dump the full stripe information, since this
can be totally bogus (e.g. if stripe_count == -1 or similar).
Instead, just dump the header information for debugging.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3271
Lustre-change: http://review.whamcloud.com/6261
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: John Hammond <johnlockwoodhammond@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obdclass: remove obsoleted md_local_file.c

This library is not used anymore and is replaced by
local_storage.c. Patch removed last remnants of it.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2886
Lustre-change: http://review.whamcloud.com/6107
Signed-off-by: Mikhail Pershin <mike.pershin@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/osc: some cleanup to reduce stack overflow chance

ptlrpcd_add_req() will wake_up other process, do not hold a spinlock
before calling ptlrpcd_queue_work()->ptlrpcd_add_req().

If current process is allocating memory, memory shrinker could get to
osc_lru_del(), don't call osc_lru_shrink() further since it could
lead a long calling chain.

Use static string OES_STRINGS in OSC_EXTENT_DUMP() to reduce stack
footprint.

Alloc crattr on heap for osc_build_rpc() to reduce stack footprint.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3281
Lustre-change: http://review.whamcloud.com/6270
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Keith Mannthey <keith.mannthey@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ldlm: suppress useless lock RPC for layout

In ldlm_lock_decref_internal() when l_lvb_data is freed to
reduce memory consumption, LDLM_FL_LVB_READY is not
cleared, so later when the lock is reused lvb is not
updated. But clearing LDLM_FL_LVB_READY forces layout refetch
at each file access, so the better is to remove the optimization.
The use case is after a restore in HSM.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3280
Lustre-change: http://review.whamcloud.com/6268
Signed-off-by: JC Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Revert "LU-2139 osc: Track and limit "unstable" pages"

This seems to be causing multiple issues: LU-3274, LU-3277

[The original commit is folded in the large Lusre patch. So we don't
have an exact commit to revert for kernel client -- Peng Tao]
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/debug: quiet noisy console error messages

Quiet a number of overly noisy and unhelpful console error
messages.  Improve the format of other nearby errors.

In the case of {lod,lov}_fix_desc_stripe_size(), this doesn't
even need a console message unless it is actually changing
some stripe size that is below the minimum.  Typically it is
only zero and is being bumped up to the default value.

[picked lov part for upstream kernel submission]
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1095
Lustre-change: http://review.whamcloud.com/6264
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/utils: missing setting echo seq for getattr/setattr

It should set echo seq before do echo getattr/setattr, otherwise
echo_client will regard it as the object with MDT0 sequence.

[picked echo client part for upstream kernel submission]
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3267
Lustre-change: http://review.whamcloud.com/6263
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/fids: fix compilation error with gcc 4.7.2

initialize oi.oi.oi_id which gcc 4.7.2 is afraid of being
used later.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3179
Lustre-change: http://review.whamcloud.com/6064
Signed-off-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: wangdi <di.wang@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ofd: refill env in ofd_get_info

Because ofd_get_info(KEY_FIEMAP) might be called from
ptlrpc_server_handle_req_in(see the stack below),
where env might not be initialized correctly(see LBUG below),
so it refill refill in ofd_get_info.

LutreError: 19182:0:(ofd_internal.h:518:ofd_info_init()) LBUG
Pid: 19182, comm: ll_ost_io00_001
Call Trace:
[<ffffffffa044e895>] libcfs_debug_dumpstack+0x55/0x80 [libcfs]
[<ffffffffa044ee97>] lbug_with_loc+0x47/0xb0 [libcfs]
[<ffffffffa0e03e62>] ofd_info_init+0x92/0x130 [ofd]
[<ffffffffa0e05835>] ofd_get_info+0x2e5/0xa90 [ofd]
[<ffffffff812805cd>] ? pointer+0x8d/0x830
[<ffffffffa029f7e5>] ? lprocfs_counter_add+0x125/0x182 [lvfs]
[<ffffffffa078528a>] nrs_orr_range_fill_physical+0x18a/0x540
[ptlrpc]
[<ffffffffa0762dd6>] ? __req_capsule_get+0x166/0x700 [ptlrpc]
[<ffffffffa073e630>] ? lustre_swab_ost_body+0x0/0x10 [ptlrpc]
[<ffffffffa07871d7>] nrs_orr_res_get+0x817/0xb80 [ptlrpc]
[<ffffffffa077d306>] nrs_resource_get+0x56/0x110 [ptlrpc]
[<ffffffffa077dccb>] nrs_resource_get_safe+0x8b/0x100 [ptlrpc]
[<ffffffffa0780248>] ptlrpc_nrs_req_initialize+0x38/0x90 [ptlrpc]
[<ffffffffa074cff0>] ptlrpc_main+0x1170/0x16f0 [ptlrpc]
[<ffffffffa074be80>] ? ptlrpc_main+0x0/0x16f0 [ptlrpc]
[<ffffffff8100c0ca>] child_rip+0xa/0x20
[<ffffffffa074be80>] ? ptlrpc_main+0x0/0x16f0 [ptlrpc]
[<ffffffffa074be80>] ? ptlrpc_main+0x0/0x16f0 [ptlrpc]
[<ffffffff8100c0c0>] ? child_rip+0x0/0x20

[picked ptlrpc part for upstream kernel submission]
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3239
Lustre-change: http://review.whamcloud.com/6204
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Nikitas Angelinas <nikitas_angelinas@xyratex.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/clio: don't ignore layout on writeback

In some cases such as kernel writeback, we shouldn't ignore the
layout, otherwise, it could race with layout change undergoing.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3160
Lustre-change: http://review.whamcloud.com/6154
Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: drop CONFIG_BROKEN dependency

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: remove enum config_flags and obd_mount_server.c

obd_mount_server.c is not really used at all, and we can remove
enum config_flags that are causing symbol conflictions due to
CONFIG_ prefixing...

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: csr: fix indentation style issue in bh.c

This is a patch to the bh.c file that fixes up all indentation errors
found the checkpatch.pl tool. Two lines beyond 80 characters are left
alone to improve readability

Signed-off-by: Davis Abubakr-Sadik Nii Nai <dwa2pac@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rf.c: Remove camel case from local variables

Camel case changes;
Static declaration
abyAL2230InitTable -> al2230_init_table
abyAL2230ChannelTable0 -> al2230_channel_table0
abyAL2230ChannelTable1 -> al2230_channel_table1

abyAL7230InitTable -> al7230_init_table_amode
abyAL7230ChannelTable0 -> al7230_channel_table0
abyAL7230ChannelTable1 -> al7230_channel_table1
abyAL7230ChannelTable2 -> al7230_channel_table2

abyVT3226_InitTable -> at3226_init_table
abyVT3226D0_InitTable -> at3226d0_init_table
abyVT3226_ChannelTable0 -> vt3226_channel_table0
abyVT3226_ChannelTable1 -> vt3226_channel_table1

abyVT3342A0_InitTable -> vt3342a0_init_table
abyVT3342_ChannelTable0 -> vt3342_channel_table0
abyVT3342_ChannelTable1 -> vt3342_channel_table1

Constant declaration
dwVT3226D0LoCurrentTable -> vt3226d0_lo_current_table

dwAL2230PowerTable -> al2230_power_table

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rf.c: RFbRFTableDownload: Remove camel case and clean up.

White space clean up.

Camel case changes;
pDevice -> priv
wLength1 -> length1
wLength2 -> length2
wLength3 -> length3
pbyAddr1 -> addr1
pbyAddr2 -> addr2
pbyAddr3 -> addr3
wLength -> length
wValue -> value
abyArray -> array

No functional changes.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rf.c: RFvRSSITodBm Remove camel case and clean up.

White space clean up.

Camel case changes;
pDevice -> priv
byCurrRSSI -> rssi
pldBm -> dbm
byIdx -> idx
abyAIROHARF -> airoharf

No functional changes.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rf.c: RFbRawSetPower Remove camel case and cleanup.

White space clean up.

Camel case changes;
pDevice -> priv
uRATE -> rate
bResult -> ret
byPwr -> power

Functional change merged as one variable.
dwMax7230Pwr -> power_setting
dwVT3226Pwr -> power_setting
dwVT3342Pwr -> power_setting

Author changes moved to Revision history.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rf.c: RFbSetPower Remove camel case and clean up.

White space clean up.

Camel case changes;
pDevice -> priv
uRATE -> rate
uCH -> channel
bResult -> ret
byPwr -> power

No functional changes.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8192u: fix printk calls in r8192U_core.c

This patch replaces calls to printk with their
corresponding calls to pr_<loglevel>(fmt, ...)
and netdev_<loglevel>(dev, fmt, ...), when it
is applicable, to make the log messages more
informative.

Also, it fixes some small typos and whitespaces
found in log messages.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ozwpan: replace kfree_skb with dev_kfree_skb in ozproto.c

This patch replaces the calls to kfree_skb with
calls to dev_kfree_skb.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ozwpan: replace kfree_skb with dev_kfree_skb in ozpd.c

This patch replaces the calls to kfree_skb with
calls to dev_kfree_skb.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ozwpan: replace alloc_skb with dev_alloc_skb in ozproto.c

This patch replaces the calls to alloc_skb with calls
to dev_alloc_skb.

dev_alloc_skb has GFP_ATOMIC priority so the
replacement does not change the code semantics.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ozwpan: replace alloc_skb with dev_alloc_skb in ozpd.c

This patch replaces the calls to alloc_skb with calls
to dev_alloc_skb.

dev_alloc_skb has GFP_ATOMIC priority so the
replacement does not change the code semantics.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/silicom/bypasslib: Move opening brace to previous line

Moved opening brace to previous line to resolve checkpatch errors and
meet kernel coding standards in bplibk.h

Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/silicom/bypasslib: Remove extra space before line

Removed extra space at beginning of a statement to resolve
checkpatch errors and meet kernel coding standards in bplibk.h

Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/silicom/bypasslib: Add space around ||

Added space around piping symbols to resolve checkpatch errors and
meet kernel coding standards in bplibk.h

Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/silicom/bypasslib: Add space around &&

Added space around double ampersands to resolve checkpatch errors
and meet kernel coding standards in bplibk.h

Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/silicom/bypasslib: Add space around ==

Added space around equal signs to resolve checkpatch errors and
meet kernel coding standards in bplibk.h

Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/silicom/bypasslib: Fix code indentation errors

Fixed code indentation errors generated by checkpatch.pl to
meet kernel coding standards in bplibk.h

Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/silicom/bypasslib: Reformat comments

Resolved the C99 comment style issue by reformatting existing comments
to meet kernel coding standards in bp_ioctl.h

Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: drm/imx: revert vsync_cnt for di->id 1

partial fix of changes from
"staging: drm/imx: Add support for VGA via TVE on i.MX53"

parallel display support / DVI needs the original setting to work

Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Rogerio Pimentel <rpimentel.silva@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: drm/imx: fix spelling error for vsync flag config

partial fix of changes from
"staging: drm/imx: Add support for VGA via TVE on i.MX53"

Have to check for vsync_pin instead of hsync_pin to set Vsync_pol.

Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Rogerio Pimentel <rpimentel.silva@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: drm/imx: set correct sync pins for display

partial fix of changes from
"staging: drm/imx: Add support for VGA via TVE on i.MX53"

Have to call imx_drm_crtc_panel_format_pins in imx_drm_crtc_panel_format
with the correct pins instead of (0, 0) This enables configuration of
correct waveforms for vsync / hsync for parallel display, LDB (i.MX53 and
i.MX6) as well as HDMI and MIPI (i.MX6)

TODO: configure pins via device tree

Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: btmtk_usb: check for a valid io_buf pointer

assigned to retval of kmalloc but not checked whether the allocation failed or not,
fail the registering if allocation fail

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dwc2: change some dev_dbg() messages to dev_vdbg()

Change some dev_dbg() messages in dwc2_hcd_hub_control() to
dev_vdbg(), to prevent massive spew to the dmesg log when a device
is disconnected.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: winbond: Made local functions static

Few functions are used only in one file. They are not included in any
other .h or .c files (I used grep to check). They seem to be local functions.
So, I have made them static.
I have also inlined one function as it is a one line function.

Signed-off-by: Harsh Kumar <harsh1kumar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: winbond: usb_free_urb(NULL) is safe

usb_free_urb(NULL) is safe. So, the check was removed. Also, couple of checkpatch.pl fixes

Signed-off-by: Harsh Kumar <harsh1kumar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fwserial: Use normal logging styles

Logging messages without newline termination are subject
to interleaving by other messages.

Avoid this by adding newlines to each message.

Neaten fwtty_<level> logging macros.
Convert driver_err to pr_err.
Add #define pr_fmt to prefix those messages.
Remove now unused driver_err macro.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: vb_setmode: delete IF_DEF_CRT2Monitor checks

Code checking for IF_DEF_CRT2Monitor is only executed for chips < XG20,
and there IF_DEF_CRT2Monitor is always true, so the flag is redundant.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: vb_setmode: delete IF_DEF_HiVision checks

Code checking for IF_DEF_HiVision is only executed for chips < XG20,
and there IF_DEF_HiVision is always true, so the flag is redundant.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: vb_setmode: delete IF_DEF_YPbPr checks

Code checking for IF_DEF_YPbPr is only executed for chips < XG20, and
there IF_DEF_YPbPr is always true, so the flag is redundant.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: delete redundant return statements

Delete redundant return statements at the end of void functions.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: XGI_DisableBridge(): delete redundant checks

Delete some redudant checks.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: XGI_EnableChISLCD(): delete trivial function

The function returns always false, delete it.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: SetFlag: delete EnableChA

This flag is never set, so checks can be removed and code behind it
deleted.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: SetFlag: delete DisableChA

This flag is never set, so checks can be removed and code behind it
deleted.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: SetFlag: delete EnableChB

This flag is never set, so checks can be removed and code behind it
deleted.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: SetFlag: delete DisableChB

This flag is never set, so checks can be removed and code behind it
deleted.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: SetFlag: delete GatingCRT

This flag is never set, so checks can be removed and code behind it
deleted.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: XGI_SetCRT1VCLK(): avoid copy-paste

Avoid copy-pasted code in if branches by rearranging the checks.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: XGI_GetRatePtrCRT2(): delete IF_DEF_LVDS check

IF_DEF_LVDS cannot be set if ProgrammingCRT2 flag is set, so remove the
check to simplify the code.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: XGI_AjustCRT2Rate(): delete IF_DEF_LVDS check

IF_DEF_LVDS cannot be set when XGI_AjustCRT2Rate() is called, so we can
remove the check and dead code.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: call XGI_GetVBType from InitTo330Pointer

Move XGI_GetVBType call inside InitTo330Pointer to avoid code duplication.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: XGI_GetVBType(): delete IF_DEF_LVDS check

XGI_GetVBType() is called only for chips < XG20 so IF_DEF_LVDS cannot
be set.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: refactor XGI_BridgeIsOn()

Refactor XGI_BridgeIsOn(). IF_DEF_LVDS bit is not valid for < XG20 chips.
Also we can make the function static by moving it to vb_init.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: fix LBUG and inode refcount bug

ldlm_proc_setup and ldlm_proc_cleanup should reset global
pde pointers otherwise remount may hit
LASSERT(ldlm_ns_proc_dir == NULL);

Also in libcfs_sock_ioctl, fput() includes itself sock_release.
So don't call sock_release twice otherwise kernel may oops
due to incorrect inode ref counting.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: adapt proc_dir_entry change

In 3.10 merge window, proc_dir_entry is now private to proc. However,
Lustre lprocfs depends heavily on it and its now-gone read_proc_t and
write_proc_t members.

The patch largely changed the fact, and made lprocfs depend on none of
proc_dir_entry private members. All lprocfs callers are converted to
use the new seq_file scheme.

Also lprocfs_srch is removed so that we can drop lprocfs_lock. All callers
are changed to save created pde in proper place.

See https://jira.hpdd.intel.com/browse/LU-3319 for more details.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: fix build error

We missed one file...

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192e: fix an endian bug

Passing the high bits of "ratr_value" to rtl8192_config_rate() only
works on little endian systems.  We should be passing a u16 value.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192e: printing the wrong array

Smatch complained that there is an array overflow here.  It looks
like we are supposed to be printing the ->rates_ex[] array which is
slightly larger than the ->rates[] array.  This is a cut and paste
error.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192e: delete some dead cruft

I have removed some unneeded comments, some blank lines and some
unused macros.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: vt6655: add missing free_netdev() on error in hostap_enable_hostapd()

Add the missing free_netdev() before return from function
hostap_enable_hostapd() in the error handling case.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: keucr: remove needless check before usb_free_coherent()

usb_free_coherent() is safe with NULL addr and this check is
not required.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxsigma: tidy up the multi-line comments

Modify the multi-line comments to follow the CodingStyle.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>