Matthieu Baerts [Fri, 18 Feb 2022 03:03:08 +0000 (19:03 -0800)]
selftests: mptcp: join: remove unused vars
Shellcheck found that these variables were set but never used.
Note that rndh is no longer prefixed with '0-' but it doesn't change
anything.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts [Fri, 18 Feb 2022 03:03:07 +0000 (19:03 -0800)]
selftests: mptcp: join: exit after usage()
With an error if it is an unknown option.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Fri, 18 Feb 2022 03:03:06 +0000 (19:03 -0800)]
selftests: mptcp: simplify pm_nl_change_endpoint
This patch simplified pm_nl_change_endpoint(), using id-based address
lookups only. And dropped the fragile way of parsing 'addr' and 'id'
from the output of pm_nl_show_endpoints().
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts [Fri, 18 Feb 2022 03:03:05 +0000 (19:03 -0800)]
selftests: mptcp: increase timeout to 20 minutes
With the increase number of tests, one CI instance, using a debug kernel
config and not recent hardware, takes around 10 minutes to execute the
slowest MPTCP test: mptcp_join.sh.
Even if most CIs don't take that long to execute these tests --
typically max 10 minutes to run all selftests -- it will help some of
them if the timeout is increased.
The timeout could be disabled but it is always good to have an extra
safeguard, just in case.
Please note that on slow public CIs with kernel debug settings, it has
been observed it can easily take up to 45 minutes to execute all tests
in this very slow environment with other jobs running in parallel.
The slowest test, mptcp_join.sh takes ~30 minutes in this case.
In such environments, the selftests timeout set in the 'settings' file
is disabled because this environment is known as being exceptionnally
slow. It has been decided not to take such exceptional environments into
account and set the timeout to 20min.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 18 Feb 2022 01:23:51 +0000 (17:23 -0800)]
Merge https://git./linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
bpf-next 2022-02-17
We've added 29 non-merge commits during the last 8 day(s) which contain
a total of 34 files changed, 1502 insertions(+), 524 deletions(-).
The main changes are:
1) Add BTFGen support to bpftool which allows to use CO-RE in kernels without
BTF info, from Mauricio Vásquez, Rafael David Tinoco, Lorenzo Fontana and
Leonardo Di Donato. (Details: https://lpc.events/event/11/contributions/948/)
2) Prepare light skeleton to be used in both kernel module and user space
and convert bpf_preload.ko to use light skeleton, from Alexei Starovoitov.
3) Rework bpftool's versioning scheme and align with libbpf's version number;
also add linked libbpf version info to "bpftool version", from Quentin Monnet.
4) Add minimal C++ specific additions to bpftool's skeleton codegen to
facilitate use of C skeletons in C++ applications, from Andrii Nakryiko.
5) Add BPF verifier sanity check whether relative offset on kfunc calls overflows
desc->imm and reject the BPF program if the case, from Hou Tao.
6) Fix libbpf to use a dynamically allocated buffer for netlink messages to
avoid receiving truncated messages on some archs, from Toke Høiland-Jørgensen.
7) Various follow-up fixes to the JIT bpf_prog_pack allocator, from Song Liu.
8) Various BPF selftest and vmtest.sh fixes, from Yucong Sun.
9) Fix bpftool pretty print handling on dumping map keys/values when no BTF
is available, from Jiri Olsa and Yinjun Zhang.
10) Extend XDP frags selftest to check for invalid length, from Lorenzo Bianconi.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (29 commits)
bpf: bpf_prog_pack: Set proper size before freeing ro_header
selftests/bpf: Fix crash in core_reloc when bpftool btfgen fails
selftests/bpf: Fix vmtest.sh to launch smp vm.
libbpf: Fix memleak in libbpf_netlink_recv()
bpftool: Fix C++ additions to skeleton
bpftool: Fix pretty print dump for maps without BTF loaded
selftests/bpf: Test "bpftool gen min_core_btf"
bpftool: Gen min_core_btf explanation and examples
bpftool: Implement btfgen_get_btf()
bpftool: Implement "gen min_core_btf" logic
bpftool: Add gen min_core_btf command
libbpf: Expose bpf_core_{add,free}_cands() to bpftool
libbpf: Split bpf_core_apply_relo()
bpf: Reject kfunc calls that overflow insn->imm
selftests/bpf: Add Skeleton templated wrapper as an example
bpftool: Add C++-specific open/load/etc skeleton wrappers
selftests/bpf: Fix GCC11 compiler warnings in -O2 mode
bpftool: Fix the error when lookup in no-btf maps
libbpf: Use dynamically allocated buffer when receiving netlink messages
libbpf: Fix libbpf.map inheritance chain for LIBBPF_0.7.0
...
====================
Link: https://lore.kernel.org/r/20220217232027.29831-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Song Liu [Thu, 17 Feb 2022 18:30:01 +0000 (10:30 -0800)]
bpf: bpf_prog_pack: Set proper size before freeing ro_header
bpf_prog_pack_free() uses header->size to decide whether the header
should be freed with module_memfree() or the bpf_prog_pack logic.
However, in kvmalloc() failure path of bpf_jit_binary_pack_alloc(),
header->size is not set yet. As a result, bpf_prog_pack_free() may treat
a slice of a pack as a standalone kvmalloc'd header and call
module_memfree() on the whole pack. This in turn causes use-after-free by
other users of the pack.
Fix this by setting ro_header->size before freeing ro_header.
Fixes:
33c9805860e5 ("bpf: Introduce bpf_jit_binary_pack_[alloc|finalize|free]")
Reported-by: syzbot+2f649ec6d2eea1495a8f@syzkaller.appspotmail.com
Reported-by: syzbot+ecb1e7e51c52f68f7481@syzkaller.appspotmail.com
Reported-by: syzbot+87f65c75f4a72db05445@syzkaller.appspotmail.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220217183001.1876034-1-song@kernel.org
David S. Miller [Thu, 17 Feb 2022 20:45:31 +0000 (20:45 +0000)]
Merge branch 'prestera-route-offloading'
Yevhen Orlov says:
====================
net: marvell: prestera: add basic routes offloading
Add support for blackhole and local routes for Marvell Prestera driver.
Subscribe on fib notifications and handle add/del.
Add features:
- Support route adding.
e.g.: "ip route add blackhole 7.7.1.1/24"
e.g.: "ip route add local 9.9.9.9 dev sw1p30"
- Support "rt_trap", "rt_offload", "rt_offload_failed" flags
- Handle case, when route in "local" table overlaps route in "main" table
example:
ip ro add blackhole 7.7.7.7
ip ro add local 7.7.7.7 dev sw1p30
# blackhole route will be deoffloaded. rt_offload flag disappeared
Limitations:
- Only "blackhole" and "local" routes supported. "nexthop" routes is TRAP
for now and will be implemented soon.
- Only "local" and "main" tables supported
====================
Co-developed-by: Taras Chornyi <tchornyi@marvell.com>
Signed-off-by: Taras Chornyi <tchornyi@marvell.com>
Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yevhen Orlov [Wed, 16 Feb 2022 01:05:57 +0000 (03:05 +0200)]
net: marvell: prestera: handle fib notifications
For now we support only TRAP or DROP, so we can offload only "local" or
"blackhole" routes.
Nexthop routes is TRAP for now. Will be implemented soon.
Co-developed-by: Taras Chornyi <tchornyi@marvell.com>
Signed-off-by: Taras Chornyi <tchornyi@marvell.com>
Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yevhen Orlov [Wed, 16 Feb 2022 01:05:56 +0000 (03:05 +0200)]
net: marvell: prestera: add hardware router objects accounting for lpm
Add new router_hw object "fib_node". For now it support only DROP and
TRAP mode.
Co-developed-by: Taras Chornyi <tchornyi@marvell.com>
Signed-off-by: Taras Chornyi <tchornyi@marvell.com>
Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yevhen Orlov [Wed, 16 Feb 2022 01:05:55 +0000 (03:05 +0200)]
net: marvell: prestera: Add router LPM ABI
Add functions to create/delete lpm entry in hw.
prestera_hw_lpm_add() take index of allocated virtual router.
Also it takes grp_id, which is index of allocated nexthop group.
ABI to create nexthop group will be added soon.
Co-developed-by: Taras Chornyi <tchornyi@marvell.com>
Signed-off-by: Taras Chornyi <tchornyi@marvell.com>
Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 17 Feb 2022 20:22:28 +0000 (12:22 -0800)]
Merge git://git./linux/kernel/git/netdev/net
Fast path bpf marge for some -next work.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 17 Feb 2022 20:01:54 +0000 (12:01 -0800)]
Merge https://git./linux/kernel/git/bpf/bpf
Alexei Starovoitov says:
====================
pull-request: bpf 2022-02-17
We've added 8 non-merge commits during the last 7 day(s) which contain
a total of 8 files changed, 119 insertions(+), 15 deletions(-).
The main changes are:
1) Add schedule points in map batch ops, from Eric.
2) Fix bpf_msg_push_data with len 0, from Felix.
3) Fix crash due to incorrect copy_map_value, from Kumar.
4) Fix crash due to out of bounds access into reg2btf_ids, from Kumar.
5) Fix a bpf_timer initialization issue with clang, from Yonghong.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add schedule points in batch ops
bpf: Fix crash due to out of bounds access into reg2btf_ids.
selftests: bpf: Check bpf_msg_push_data return value
bpf: Fix a bpf_timer initialization issue
bpf: Emit bpf_timer in vmlinux BTF
selftests/bpf: Add test for bpf_timer overwriting crash
bpf: Fix crash due to incorrect copy_map_value
bpf: Do not try bpf_msg_push_data with len 0
====================
Link: https://lore.kernel.org/r/20220217190000.37925-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 17 Feb 2022 19:44:20 +0000 (11:44 -0800)]
Merge git://git./linux/kernel/git/netdev/net
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 17 Feb 2022 19:33:59 +0000 (11:33 -0800)]
Merge tag 'net-5.17-rc5' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and netfilter.
Current release - regressions:
- dsa: lantiq_gswip: fix use after free in gswip_remove()
- smc: avoid overwriting the copies of clcsock callback functions
Current release - new code bugs:
- iwlwifi:
- fix use-after-free when no FW is present
- mei: fix the pskb_may_pull check in ipv4
- mei: retry mapping the shared area
- mvm: don't feed the hardware RFKILL into iwlmei
Previous releases - regressions:
- ipv6: mcast: use rcu-safe version of ipv6_get_lladdr()
- tipc: fix wrong publisher node address in link publications
- iwlwifi: mvm: don't send SAR GEO command for 3160 devices, avoid FW
assertion
- bgmac: make idm and nicpm resource optional again
- atl1c: fix tx timeout after link flap
Previous releases - always broken:
- vsock: remove vsock from connected table when connect is
interrupted by a signal
- ping: change destination interface checks to match raw sockets
- crypto: af_alg - get rid of alg_memory_allocated to avoid confusing
semantics (and null-deref) after SO_RESERVE_MEM was added
- ipv6: make exclusive flowlabel checks per-netns
- bonding: force carrier update when releasing slave
- sched: limit TC_ACT_REPEAT loops
- bridge: multicast: notify switchdev driver whenever MC processing
gets disabled because of max entries reached
- wifi: brcmfmac: fix crash in brcm_alt_fw_path when WLAN not found
- iwlwifi: fix locking when "HW not ready"
- phy: mediatek: remove PHY mode check on MT7531
- dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLAN
- dsa: lan9303:
- fix polarity of reset during probe
- fix accelerated VLAN handling"
* tag 'net-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
bonding: force carrier update when releasing slave
nfp: flower: netdev offload check for ip6gretap
ipv6: fix data-race in fib6_info_hw_flags_set / fib6_purge_rt
ipv4: fix data races in fib_alias_hw_flags_set
net: dsa: lan9303: add VLAN IDs to master device
net: dsa: lan9303: handle hwaccel VLAN tags
vsock: remove vsock from connected table when connect is interrupted by a signal
Revert "net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname"
ping: fix the dif and sdif check in ping_lookup
net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990
net: sched: limit TC_ACT_REPEAT loops
tipc: fix wrong notification node addresses
net: dsa: lantiq_gswip: fix use after free in gswip_remove()
ipv6: per-netns exclusive flowlabel checks
net: bridge: multicast: notify switchdev driver whenever MC processing gets disabled
CDC-NCM: avoid overflow in sanity checking
mctp: fix use after free
net: mscc: ocelot: fix use-after-free in ocelot_vlan_del()
bonding: fix data-races around agg_select_timer
dpaa2-eth: Initialize mutex used in one step timestamping path
...
Yucong Sun [Thu, 17 Feb 2022 18:02:10 +0000 (10:02 -0800)]
selftests/bpf: Fix crash in core_reloc when bpftool btfgen fails
Avoid unnecessary goto cleanup, as there is nothing to clean up.
Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220217180210.2981502-1-fallentree@fb.com
Yucong Sun [Thu, 17 Feb 2022 15:52:12 +0000 (07:52 -0800)]
selftests/bpf: Fix vmtest.sh to launch smp vm.
Fix typo in vmtest.sh to make sure it launch proper vm with 8 cpus.
Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220217155212.2309672-1-fallentree@fb.com
Zhang Changzhong [Wed, 16 Feb 2022 14:18:08 +0000 (22:18 +0800)]
bonding: force carrier update when releasing slave
In __bond_release_one(), bond_set_carrier() is only called when bond
device has no slave. Therefore, if we remove the up slave from a master
with two slaves and keep the down slave, the master will remain up.
Fix this by moving bond_set_carrier() out of if (!bond_has_slaves(bond))
statement.
Reproducer:
$ insmod bonding.ko mode=0 miimon=100 max_bonds=2
$ ifconfig bond0 up
$ ifenslave bond0 eth0 eth1
$ ifconfig eth0 down
$ ifenslave -d bond0 eth1
$ cat /proc/net/bonding/bond0
Fixes:
ff59c4563a8d ("[PATCH] bonding: support carrier state for master")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/1645021088-38370-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Thu, 17 Feb 2022 18:19:02 +0000 (10:19 -0800)]
bpf: Add schedule points in batch ops
syzbot reported various soft lockups caused by bpf batch operations.
INFO: task kworker/1:1:27 blocked for more than 140 seconds.
INFO: task hung in rcu_barrier
Nothing prevents batch ops to process huge amount of data,
we need to add schedule points in them.
Note that maybe_wait_bpf_programs(map) calls from
generic_map_delete_batch() can be factorized by moving
the call after the loop.
This will be done later in -next tree once we get this fix merged,
unless there is strong opinion doing this optimization sooner.
Fixes:
aa2e93b8e58e ("bpf: Add generic support for update and delete batch ops")
Fixes:
cb4d03ab499d ("bpf: Add generic support for lookup batch op")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Brian Vazquez <brianvv@google.com>
Link: https://lore.kernel.org/bpf/20220217181902.808742-1-eric.dumazet@gmail.com
Luis Chamberlain [Tue, 15 Feb 2022 02:08:28 +0000 (18:08 -0800)]
fs/file_table: fix adding missing kmemleak_not_leak()
Commit
b42bc9a3c511 ("Fix regression due to "fs: move binfmt_misc sysctl
to its own file") fixed a regression, however it failed to add a
kmemleak_not_leak().
Fixes:
b42bc9a3c511 ("Fix regression due to "fs: move binfmt_misc sysctl to its own file")
Reported-by: Tong Zhang <ztong0001@gmail.com>
Cc: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 17 Feb 2022 18:06:09 +0000 (10:06 -0800)]
Merge tag 'perf-tools-fixes-for-v5.17-2022-02-17' of git://git./linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix corrupt inject files when only last branch option is enabled with
ARM CoreSight ETM
- Fix use-after-free for realloc(..., 0) in libsubcmd, found by gcc 12
- Defer freeing string after possible strlen() on it in the BPF loader,
found by gcc 12
- Avoid early exit in 'perf trace' due SIGCHLD from non-workload
processes
- Fix arm64 perf_event_attr 'perf test's wrt --call-graph
initialization
- Fix libperf 32-bit build for 'perf test' wrt uint64_t printf
- Fix perf_cpu_map__for_each_cpu macro in libperf, providing access to
the CPU iterator
- Sync linux/perf_event.h UAPI with the kernel sources
- Update Jiri Olsa's email address in MAINTAINERS
* tag 'perf-tools-fixes-for-v5.17-2022-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf bpf: Defer freeing string after possible strlen() on it
perf test: Fix arm64 perf_event_attr tests wrt --call-graph initialization
libsubcmd: Fix use-after-free for realloc(..., 0)
libperf: Fix perf_cpu_map__for_each_cpu macro
perf cs-etm: Fix corrupt inject files when only last branch option is enabled
perf cs-etm: No-op refactor of synth opt usage
libperf: Fix 32-bit build for tests uint64_t printf
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
perf trace: Avoid early exit due SIGCHLD from non-workload processes
MAINTAINERS: Update Jiri's email address
Linus Torvalds [Thu, 17 Feb 2022 17:54:00 +0000 (09:54 -0800)]
Merge tag 'modules-5.17-rc5' of git://git./linux/kernel/git/mcgrof/linux
Pull module fix from Luis Chamberlain:
"Fixes module decompression when CONFIG_SYSFS=n
The only fix trickled down for v5.17-rc cycle so far is the fix for
module decompression when CONFIG_SYSFS=n. This was reported through
0-day"
* tag 'modules-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: fix building with sysfs disabled
Danie du Toit [Thu, 17 Feb 2022 12:48:20 +0000 (14:48 +0200)]
nfp: flower: netdev offload check for ip6gretap
IPv6 GRE tunnels are not being offloaded, this is caused by a missing
netdev offload check. The functionality of IPv6 GRE tunnel offloading
was previously added but this check was not included. Adding the
ip6gretap check allows IPv6 GRE tunnels to be offloaded correctly.
Fixes:
f7536ffb0986 ("nfp: flower: Allow ipv6gretap interface for offloading")
Signed-off-by: Danie du Toit <danie.dutoit@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220217124820.40436-1-louis.peens@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 16 Feb 2022 17:32:17 +0000 (09:32 -0800)]
ipv6: fix data-race in fib6_info_hw_flags_set / fib6_purge_rt
Because fib6_info_hw_flags_set() is called without any synchronization,
all accesses to gi6->offload, fi->trap and fi->offload_failed
need some basic protection like READ_ONCE()/WRITE_ONCE().
BUG: KCSAN: data-race in fib6_info_hw_flags_set / fib6_purge_rt
read to 0xffff8881087d5886 of 1 bytes by task 13953 on cpu 0:
fib6_drop_pcpu_from net/ipv6/ip6_fib.c:1007 [inline]
fib6_purge_rt+0x4f/0x580 net/ipv6/ip6_fib.c:1033
fib6_del_route net/ipv6/ip6_fib.c:1983 [inline]
fib6_del+0x696/0x890 net/ipv6/ip6_fib.c:2028
__ip6_del_rt net/ipv6/route.c:3876 [inline]
ip6_del_rt+0x83/0x140 net/ipv6/route.c:3891
__ipv6_dev_ac_dec+0x2b5/0x370 net/ipv6/anycast.c:374
ipv6_dev_ac_dec net/ipv6/anycast.c:387 [inline]
__ipv6_sock_ac_close+0x141/0x200 net/ipv6/anycast.c:207
ipv6_sock_ac_close+0x79/0x90 net/ipv6/anycast.c:220
inet6_release+0x32/0x50 net/ipv6/af_inet6.c:476
__sock_release net/socket.c:650 [inline]
sock_close+0x6c/0x150 net/socket.c:1318
__fput+0x295/0x520 fs/file_table.c:280
____fput+0x11/0x20 fs/file_table.c:313
task_work_run+0x8e/0x110 kernel/task_work.c:164
tracehook_notify_resume include/linux/tracehook.h:189 [inline]
exit_to_user_mode_loop kernel/entry/common.c:175 [inline]
exit_to_user_mode_prepare+0x160/0x190 kernel/entry/common.c:207
__syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline]
syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:300
do_syscall_64+0x50/0xd0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x44/0xae
write to 0xffff8881087d5886 of 1 bytes by task 1912 on cpu 1:
fib6_info_hw_flags_set+0x155/0x3b0 net/ipv6/route.c:6230
nsim_fib6_rt_hw_flags_set drivers/net/netdevsim/fib.c:668 [inline]
nsim_fib6_rt_add drivers/net/netdevsim/fib.c:691 [inline]
nsim_fib6_rt_insert drivers/net/netdevsim/fib.c:756 [inline]
nsim_fib6_event drivers/net/netdevsim/fib.c:853 [inline]
nsim_fib_event drivers/net/netdevsim/fib.c:886 [inline]
nsim_fib_event_work+0x284f/0x2cf0 drivers/net/netdevsim/fib.c:1477
process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
worker_thread+0x616/0xa70 kernel/workqueue.c:2454
kthread+0x2c7/0x2e0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30
value changed: 0x22 -> 0x2a
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 1912 Comm: kworker/1:3 Not tainted 5.16.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events nsim_fib_event_work
Fixes:
0c5fcf9e249e ("IPv6: Add "offload failed" indication to routes")
Fixes:
bb3c4ab93e44 ("ipv6: Add "offload" and "trap" indications to routes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Amit Cohen <amcohen@nvidia.com>
Cc: Ido Schimmel <idosch@nvidia.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220216173217.3792411-2-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 16 Feb 2022 17:32:16 +0000 (09:32 -0800)]
ipv4: fix data races in fib_alias_hw_flags_set
fib_alias_hw_flags_set() can be used by concurrent threads,
and is only RCU protected.
We need to annotate accesses to following fields of struct fib_alias:
offload, trap, offload_failed
Because of READ_ONCE()WRITE_ONCE() limitations, make these
field u8.
BUG: KCSAN: data-race in fib_alias_hw_flags_set / fib_alias_hw_flags_set
read to 0xffff888134224a6a of 1 bytes by task 2013 on cpu 1:
fib_alias_hw_flags_set+0x28a/0x470 net/ipv4/fib_trie.c:1050
nsim_fib4_rt_hw_flags_set drivers/net/netdevsim/fib.c:350 [inline]
nsim_fib4_rt_add drivers/net/netdevsim/fib.c:367 [inline]
nsim_fib4_rt_insert drivers/net/netdevsim/fib.c:429 [inline]
nsim_fib4_event drivers/net/netdevsim/fib.c:461 [inline]
nsim_fib_event drivers/net/netdevsim/fib.c:881 [inline]
nsim_fib_event_work+0x1852/0x2cf0 drivers/net/netdevsim/fib.c:1477
process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
process_scheduled_works kernel/workqueue.c:2370 [inline]
worker_thread+0x7df/0xa70 kernel/workqueue.c:2456
kthread+0x1bf/0x1e0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30
write to 0xffff888134224a6a of 1 bytes by task 4872 on cpu 0:
fib_alias_hw_flags_set+0x2d5/0x470 net/ipv4/fib_trie.c:1054
nsim_fib4_rt_hw_flags_set drivers/net/netdevsim/fib.c:350 [inline]
nsim_fib4_rt_add drivers/net/netdevsim/fib.c:367 [inline]
nsim_fib4_rt_insert drivers/net/netdevsim/fib.c:429 [inline]
nsim_fib4_event drivers/net/netdevsim/fib.c:461 [inline]
nsim_fib_event drivers/net/netdevsim/fib.c:881 [inline]
nsim_fib_event_work+0x1852/0x2cf0 drivers/net/netdevsim/fib.c:1477
process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
process_scheduled_works kernel/workqueue.c:2370 [inline]
worker_thread+0x7df/0xa70 kernel/workqueue.c:2456
kthread+0x1bf/0x1e0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30
value changed: 0x00 -> 0x02
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 4872 Comm: kworker/0:0 Not tainted 5.17.0-rc3-syzkaller-00188-g1d41d2e82623-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events nsim_fib_event_work
Fixes:
90b93f1b31f8 ("ipv4: Add "offload" and "trap" indications to routes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220216173217.3792411-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mans Rullgard [Wed, 16 Feb 2022 20:48:18 +0000 (20:48 +0000)]
net: dsa: lan9303: add VLAN IDs to master device
If the master device does VLAN filtering, the IDs used by the switch
must be added for any frames to be received. Do this in the
port_enable() function, and remove them in port_disable().
Fixes:
a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303")
Signed-off-by: Mans Rullgard <mans@mansr.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220216204818.28746-1-mans@mansr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mans Rullgard [Wed, 16 Feb 2022 12:46:34 +0000 (12:46 +0000)]
net: dsa: lan9303: handle hwaccel VLAN tags
Check for a hwaccel VLAN tag on rx and use it if present. Otherwise,
use __skb_vlan_pop() like the other tag parsers do. This fixes the case
where the VLAN tag has already been consumed by the master.
Fixes:
a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303")
Signed-off-by: Mans Rullgard <mans@mansr.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220216124634.23123-1-mans@mansr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 17 Feb 2022 16:57:47 +0000 (08:57 -0800)]
mm: don't try to NUMA-migrate COW pages that have other uses
Oded Gabbay reports that enabling NUMA balancing causes corruption with
his Gaudi accelerator test load:
"All the details are in the bug, but the bottom line is that somehow,
this patch causes corruption when the numa balancing feature is
enabled AND we don't use process affinity AND we use GUP to pin pages
so our accelerator can DMA to/from system memory.
Either disabling numa balancing, using process affinity to bind to
specific numa-node or reverting this patch causes the bug to
disappear"
and Oded bisected the issue to commit
09854ba94c6a ("mm: do_wp_page()
simplification").
Now, the NUMA balancing shouldn't actually be changing the writability
of a page, and as such shouldn't matter for COW. But it appears it
does. Suspicious.
However, regardless of that, the condition for enabling NUMA faults in
change_pte_range() is nonsensical. It uses "page_mapcount(page)" to
decide if a COW page should be NUMA-protected or not, and that makes
absolutely no sense.
The number of mappings a page has is irrelevant: not only does GUP get a
reference to a page as in Oded's case, but the other mappings migth be
paged out and the only reference to them would be in the page count.
Since we should never try to NUMA-balance a page that we can't move
anyway due to other references, just fix the code to use 'page_count()'.
Oded confirms that that fixes his issue.
Now, this does imply that something in NUMA balancing ends up changing
page protections (other than the obvious one of making the page
inaccessible to get the NUMA faulting information). Otherwise the COW
simplification wouldn't matter - since doing the GUP on the page would
make sure it's writable.
The cause of that permission change would be good to figure out too,
since it clearly results in spurious COW events - but fixing the
nonsensical test that just happened to work before is obviously the
CorrectThing(tm) to do regardless.
Fixes:
09854ba94c6a ("mm: do_wp_page() simplification")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215616
Link: https://lore.kernel.org/all/CAFCwf10eNmwq2wD71xjUhqkvv5+_pJMR1nPug2RqNDcFT4H86Q@mail.gmail.com/
Reported-and-tested-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Seth Forshee [Thu, 17 Feb 2022 14:13:12 +0000 (08:13 -0600)]
vsock: remove vsock from connected table when connect is interrupted by a signal
vsock_connect() expects that the socket could already be in the
TCP_ESTABLISHED state when the connecting task wakes up with a signal
pending. If this happens the socket will be in the connected table, and
it is not removed when the socket state is reset. In this situation it's
common for the process to retry connect(), and if the connection is
successful the socket will be added to the connected table a second
time, corrupting the list.
Prevent this by calling vsock_remove_connected() if a signal is received
while waiting for a connection. This is harmless if the socket is not in
the connected table, and if it is in the table then removing it will
prevent list corruption from a double add.
Note for backporting: this patch requires
d5afa82c977e ("vsock: correct
removal of socket from the list"), which is in all current stable trees
except 4.9.y.
Fixes:
d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: Seth Forshee <sforshee@digitalocean.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20220217141312.2297547-1-sforshee@digitalocean.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jonas Gorski [Wed, 16 Feb 2022 18:46:34 +0000 (10:46 -0800)]
Revert "net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname"
This reverts commit
3710e80952cf2dc48257ac9f145b117b5f74e0a5.
Since idm_base and nicpm_base are still optional resources not present
on all platforms, this breaks the driver for everything except Northstar
2 (which has both).
The same change was already reverted once with
755f5738ff98 ("net:
broadcom: fix a mistake about ioremap resource").
So let's do it again.
Fixes:
3710e80952cf ("net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
[florian: Added comments to explain the resources are optional]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220216184634.2032460-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 16 Feb 2022 18:20:37 +0000 (10:20 -0800)]
ipv6/addrconf: ensure addrconf_verify_rtnl() has completed
Before freeing the hash table in addrconf_exit_net(),
we need to make sure the work queue has completed,
or risk NULL dereference or UAF.
Thus, use cancel_delayed_work_sync() to enforce this.
We do not hold RTNL in addrconf_exit_net(), making this safe.
Fixes:
8805d13ff1b2 ("ipv6/addrconf: use one delayed work per netns")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220216182037.3742-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 15 Feb 2022 22:53:10 +0000 (14:53 -0800)]
net: allow out-of-order netdev unregistration
Sprinkle for each loops to allow netdevices to be unregistered
out of order, as their refs are released.
This prevents problems caused by dependencies between netdevs
which want to release references in their ->priv_destructor.
See commit
d6ff94afd90b ("vlan: move dev_put into vlan_dev_uninit")
for example.
Eric has removed the only known ordering requirement in
commit
c002496babfd ("Merge branch 'ipv6-loopback'")
so let's try this and see if anything explodes...
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20220215225310.3679266-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 15 Feb 2022 22:53:09 +0000 (14:53 -0800)]
net: transition netdev reg state earlier in run_todo
In prep for unregistering netdevs out of order move the netdev
state validation and change outside of the loop.
While at it modernize this code and use WARN() instead of
pr_err() + dump_stack().
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20220215225310.3679266-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrii Nakryiko [Thu, 17 Feb 2022 07:39:58 +0000 (23:39 -0800)]
libbpf: Fix memleak in libbpf_netlink_recv()
Ensure that libbpf_netlink_recv() frees dynamically allocated buffer in
all code paths.
Fixes:
9c3de619e13e ("libbpf: Use dynamically allocated buffer when receiving netlink messages")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20220217073958.276959-1-andrii@kernel.org
Xin Long [Wed, 16 Feb 2022 05:20:52 +0000 (00:20 -0500)]
ping: fix the dif and sdif check in ping_lookup
When 'ping' changes to use PING socket instead of RAW socket by:
# sysctl -w net.ipv4.ping_group_range="0 100"
There is another regression caused when matching sk_bound_dev_if
and dif, RAW socket is using inet_iif() while PING socket lookup
is using skb->dev->ifindex, the cmd below fails due to this:
# ip link add dummy0 type dummy
# ip link set dummy0 up
# ip addr add 192.168.111.1/24 dev dummy0
# ping -I dummy0 192.168.111.1 -c1
The issue was also reported on:
https://github.com/iputils/iputils/issues/104
But fixed in iputils in a wrong way by not binding to device when
destination IP is on device, and it will cause some of kselftests
to fail, as Jianlin noticed.
This patch is to use inet(6)_iif and inet(6)_sdif to get dif and
sdif for PING socket, and keep consistent with RAW socket.
Fixes:
c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniele Palmas [Tue, 15 Feb 2022 11:13:35 +0000 (12:13 +0100)]
net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990
Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit FN990
0x1071 composition in order to avoid bind error.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 17 Feb 2022 14:22:10 +0000 (14:22 +0000)]
Merge branch 'ping6-SOL_IPV6'
Jakub Kicinski says:
====================
net: ping6: support setting basic SOL_IPV6 options via cmsg
Support for IPV6_HOPLIMIT, IPV6_TCLASS, IPV6_DONTFRAG on ICMPv6
sockets and associated tests. I have no immediate plans to
implement IPV6_FLOWINFO and all the extension header stuff.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 17 Feb 2022 01:21:20 +0000 (17:21 -0800)]
selftests: net: basic test for IPV6_2292*
Add a basic test to make sure ping sockets don't crash
with IPV6_2292* options.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 17 Feb 2022 01:21:19 +0000 (17:21 -0800)]
selftests: net: test IPV6_HOPLIMIT
Test setting IPV6_HOPLIMIT via setsockopt and cmsg
across socket types.
Output without the kernel support (this series):
Case HOPLIMIT ICMP cmsg - packet data returned 1, expected 0
Case HOPLIMIT ICMP diff - packet data returned 1, expected 0
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 17 Feb 2022 01:21:18 +0000 (17:21 -0800)]
selftests: net: test IPV6_TCLASS
Test setting IPV6_TCLASS via setsockopt and cmsg
across socket types.
Output without the kernel support (this series):
Case TCLASS ICMP cmsg - packet data returned 1, expected 0
Case TCLASS ICMP cmsg - rejection returned 0, expected 1
Case TCLASS ICMP diff - pass returned 1, expected 0
Case TCLASS ICMP diff - packet data returned 1, expected 0
Case TCLASS ICMP diff - rejection returned 0, expected 1
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 17 Feb 2022 01:21:17 +0000 (17:21 -0800)]
selftests: net: test IPV6_DONTFRAG
Test setting IPV6_DONTFRAG via setsockopt and cmsg
across socket types.
Output without the kernel support (this series):
Case DONTFRAG ICMP setsock returned 0, expected 1
Case DONTFRAG ICMP cmsg returned 0, expected 1
Case DONTFRAG ICMP both returned 0, expected 1
Case DONTFRAG ICMP diff returned 0, expected 1
FAIL - 4/24 cases failed
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 17 Feb 2022 01:21:16 +0000 (17:21 -0800)]
net: ping6: support setting basic SOL_IPV6 options via cmsg
Support setting IPV6_HOPLIMIT, IPV6_TCLASS, IPV6_DONTFRAG
during sendmsg via SOL_IPV6 cmsgs.
tclass and dontfrag are init'ed from struct ipv6_pinfo in
ipcm6_init_sk(), while hlimit is inited to -1, so we need
to handle it being populated via cmsg explicitly.
Leave extension headers and flowlabel unimplemented.
Those are slightly more laborious to test and users
seem to primarily care about IPV6_TCLASS.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 17 Feb 2022 14:17:10 +0000 (14:17 +0000)]
Merge branch 'switchdev-BRENTRY'
Vladimir Oltean says:
====================
kRemove BRENTRY checks from switchdev drivers
As discussed here:
https://patchwork.kernel.org/project/netdevbpf/patch/
20220214233111.1586715-2-vladimir.oltean@nxp.com/#
24738869
no switchdev driver makes use of VLAN port objects that lack the
BRIDGE_VLAN_INFO_BRENTRY flag. Notifying them in the first place rather
seems like an omission of commit
9c86ce2c1ae3 ("net: bridge: Notify
about bridge VLANs").
Since commit
3116ad0696dd ("net: bridge: vlan: don't notify to switchdev
master VLANs without BRENTRY flag") that was just merged, the bridge no
longer notifies switchdev upon creation of these VLANs, so we can remove
the checks from drivers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 16 Feb 2022 16:47:52 +0000 (18:47 +0200)]
net: ti: cpsw: remove guards against !BRIDGE_VLAN_INFO_BRENTRY
Since commit
3116ad0696dd ("net: bridge: vlan: don't notify to switchdev
master VLANs without BRENTRY flag"), the bridge no longer emits
switchdev notifiers for VLANs that don't have the
BRIDGE_VLAN_INFO_BRENTRY flag, so these checks are dead code.
Remove them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 16 Feb 2022 16:47:51 +0000 (18:47 +0200)]
net: ti: am65-cpsw-nuss: remove guards against !BRIDGE_VLAN_INFO_BRENTRY
Since commit
3116ad0696dd ("net: bridge: vlan: don't notify to switchdev
master VLANs without BRENTRY flag"), the bridge no longer emits
switchdev notifiers for VLANs that don't have the
BRIDGE_VLAN_INFO_BRENTRY flag, so these checks are dead code.
Remove them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 16 Feb 2022 16:47:50 +0000 (18:47 +0200)]
net: sparx5: remove guards against !BRIDGE_VLAN_INFO_BRENTRY
Since commit
3116ad0696dd ("net: bridge: vlan: don't notify to switchdev
master VLANs without BRENTRY flag"), the bridge no longer emits
switchdev notifiers for VLANs that don't have the
BRIDGE_VLAN_INFO_BRENTRY flag, so these checks are dead code.
Remove them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 16 Feb 2022 16:47:49 +0000 (18:47 +0200)]
net: lan966x: remove guards against !BRIDGE_VLAN_INFO_BRENTRY
Since commit
3116ad0696dd ("net: bridge: vlan: don't notify to switchdev
master VLANs without BRENTRY flag"), the bridge no longer emits
switchdev notifiers for VLANs that don't have the
BRIDGE_VLAN_INFO_BRENTRY flag, so these checks are dead code.
Remove them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 16 Feb 2022 16:47:48 +0000 (18:47 +0200)]
mlxsw: spectrum: remove guards against !BRIDGE_VLAN_INFO_BRENTRY
Since commit
3116ad0696dd ("net: bridge: vlan: don't notify to switchdev
master VLANs without BRENTRY flag"), the bridge no longer emits
switchdev notifiers for VLANs that don't have the
BRIDGE_VLAN_INFO_BRENTRY flag, so these checks are dead code.
Remove them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 17 Feb 2022 14:06:51 +0000 (14:06 +0000)]
Merge branch 'ptp-over-udp-dsa'
Vladimir Oltean says:
====================
Support PTP over UDP with the ocelot-8021q DSA tagging protocol
The alternative tag_8021q-based tagger for Ocelot switches, added here:
https://patchwork.kernel.org/project/netdevbpf/cover/
20210129010009.3959398-1-olteanv@gmail.com/
gained support for PTP over L2 here:
https://patchwork.kernel.org/project/netdevbpf/cover/
20210213223801.1334216-1-olteanv@gmail.com/
mostly as a minimum viable requirement. That PTP support was mostly
self-contained code that installed some rules to replicate PTP packets
on the CPU queue, in felix_setup_mmio_filtering().
However ocelot-8021q starts to look more interesting for general purpose
usage, so it is now time to reduce the technical debt by integrating the
PTP traps used by Felix for tag_8021q with the rest of the Ocelot driver.
There is further consolidation of traps to be done. The cookies used by
MRP traps overlap with the cookies used for tag_8021q PTP traps, so
those features could not be used at the same time.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 16 Feb 2022 14:30:14 +0000 (16:30 +0200)]
net: dsa: tag_ocelot_8021q: calculate TX checksum in software for deferred packets
DSA inherits NETIF_F_CSUM_MASK from master->vlan_features, and the
expectation is that TX checksumming is offloaded and not done in
software.
Normally the DSA master takes care of this, but packets handled by
ocelot_defer_xmit() are a very special exception, because they are
actually injected into the switch through register-based MMIO. So the
DSA master is not involved at all for these packets => no one calculates
the checksum.
This allows PTP over UDP to work using the ocelot-8021q tagging
protocol.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 16 Feb 2022 14:30:13 +0000 (16:30 +0200)]
net: dsa: felix: update destinations of existing traps with ocelot-8021q
Historically, the felix DSA driver has installed special traps such that
PTP over L2 works with the ocelot-8021q tagging protocol; commit
0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP
timestamping") has the details.
Then the ocelot switch library also gained more comprehensive support
for PTP traps through commit
96ca08c05838 ("net: mscc: ocelot: set up
traps for PTP packets").
Right now, PTP over L2 works using ocelot-8021q via the traps it has set
for itself, but nothing else does. Consolidating the two code blocks
would make ocelot-8021q gain support for PTP over L4 and tc-flower
traps, and at the same time avoid some code and TCAM duplication.
The traps are similar in intent, but different in execution, so some
explanation is required. The traps set up by felix_setup_mmio_filtering()
are VCAP IS1 filters, which have a PAG that chains them to a VCAP IS2
filter, and the IS2 is where the 'trap' action resides. The traps set up
by ocelot_trap_add(), on the other hand, have a single filter, in VCAP
IS2. The reason for chaining VCAP IS1 and IS2 in Felix was to ensure
that the hardcoded traps take precedence and cannot be overridden by the
Ocelot switch library.
So in principle, the PTP traps needed for ocelot-8021q in the Felix
driver can rely on ocelot_trap_add(), but the filters need to be patched
to account for a quirk that LS1028A has: the quirk_no_xtr_irq described
in commit
0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP
timestamping"). Live-patching is done by iterating through the trap list
every time we know it has been updated, and transforming a trap into a
redirect + CPU copy if ocelot-8021q is in use.
Making the DSA ocelot-8021q tagger work with the Ocelot traps means we
can eliminate the dedicated OCELOT_VCAP_IS1_TAG_8021Q_PTP_MMIO and
OCELOT_VCAP_IS2_TAG_8021Q_PTP_MMIO cookies. To minimize the patch delta,
OCELOT_VCAP_IS2_MRP_TRAP takes the place of OCELOT_VCAP_IS2_TAG_8021Q_PTP_MMIO
(the alternative would have been to left-shift all cookie numbers by 1).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 16 Feb 2022 14:30:12 +0000 (16:30 +0200)]
net: dsa: felix: remove dead code in felix_setup_mmio_filtering()
There has been some controversy related to the sanity check that a CPU
port exists, and commit
e8b1d7698038 ("net: dsa: felix: Fix memory leak
in felix_setup_mmio_filtering") even "corrected" an apparent memory leak
as static analysis tools see it.
However, the check is completely dead code, since the earliest point at
which felix_setup_mmio_filtering() can be called is:
felix_pci_probe
-> dsa_register_switch
-> dsa_switch_probe
-> dsa_tree_setup
-> dsa_tree_setup_cpu_ports
-> dsa_tree_setup_default_cpu
-> contains the "DSA: tree %d has no CPU port\n" check
-> dsa_tree_setup_master
-> dsa_master_setup
-> sysfs_create_group(&dev->dev.kobj, &dsa_group);
-> makes tagging_store() callable
-> dsa_tree_change_tag_proto
-> dsa_tree_notify
-> dsa_switch_event
-> dsa_switch_change_tag_proto
-> ds->ops->change_tag_protocol
-> felix_change_tag_protocol
-> felix_set_tag_protocol
-> felix_setup_tag_8021q
-> felix_setup_mmio_filtering
-> breaks at first CPU port
So probing would have failed earlier if there wasn't any CPU port
defined.
To avoid all confusion, delete the dead code and replace it with a
comment.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 16 Feb 2022 14:30:11 +0000 (16:30 +0200)]
net: mscc: ocelot: annotate which traps need PTP timestamping
The ocelot switch library does not need this information, but the felix
DSA driver does.
As a reminder, the VSC9959 switch in LS1028A doesn't have an IRQ line
for packet extraction, so to be notified that a PTP packet needs to be
dequeued, it receives that packet also over Ethernet, by setting up a
packet trap. The Felix driver needs to install special kinds of traps
for packets in need of RX timestamps, such that the packets are
replicated both over Ethernet and over the CPU port module.
But the Ocelot switch library sets up more than one trap for PTP event
messages; it also traps PTP general messages, MRP control messages etc.
Those packets don't need PTP timestamps, so there's no reason for the
Felix driver to send them to the CPU port module.
By knowing which traps need PTP timestamps, the Felix driver can
adjust the traps installed using ocelot_trap_add() such that only those
will actually get delivered to the CPU port module.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 16 Feb 2022 14:30:10 +0000 (16:30 +0200)]
net: mscc: ocelot: keep traps in a list
When using the ocelot-8021q tagging protocol, the CPU port isn't
configured as an NPI port, but is a regular port. So a "trap to CPU"
operation is actually a "redirect" operation. So DSA needs to set up the
trapping action one way or another, depending on the tagging protocol in
use.
To ease DSA's work of modifying the action, keep all currently installed
traps in a list, so that DSA can live-patch them when the tagging
protocol changes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 16 Feb 2022 14:30:09 +0000 (16:30 +0200)]
net: dsa: felix: use DSA port iteration helpers
Use the helpers that avoid the quadratic complexity associated with
calling dsa_to_port() indirectly: dsa_is_unused_port(),
dsa_is_cpu_port().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 16 Feb 2022 14:30:08 +0000 (16:30 +0200)]
net: mscc: ocelot: avoid overlap in VCAP IS2 between PTP and MRP traps
OCELOT_VCAP_IS2_TAG_8021Q_TXVLAN overlaps with OCELOT_VCAP_IS2_MRP_REDIRECT.
To avoid this, make OCELOT_VCAP_IS2_MRP_REDIRECT take the cookie region
from N to 2 * N - 1 (where N is ocelot->num_phys_ports).
To avoid any risk that the singleton (not per port) VCAP IS2 filters
overlap with per-port VCAP IS2 filters, we must ensure that the number
of singleton filters is smaller than the number of physical ports.
This is true right now, but may change in the future as switches with
less ports get supported, or more singleton filters get added. So to be
future-proof, let's move the singleton filters at the end of the range,
where they won't overlap with anything to their right.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 16 Feb 2022 14:30:07 +0000 (16:30 +0200)]
net: mscc: ocelot: use a single VCAP filter for all MRP traps
The MRP assist code installs a VCAP IS2 trapping rule for each port, but
since the key and the action is the same, just the ingress port mask
differs, there isn't any need to do this. We can save some space in the
TCAM by using a single filter and adjusting the ingress port mask.
Reuse the ocelot_trap_add() and ocelot_trap_del() functions for this
purpose.
Now that the cookies are no longer per port, we need to change the
allocation scheme such that MRP traps use a fixed number.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 16 Feb 2022 14:30:06 +0000 (16:30 +0200)]
net: mscc: ocelot: delete OCELOT_MRP_CPUQ
MRP frames are configured to be trapped to the CPU queue 7, and this
number is reflected in the extraction header. However, the information
isn't used anywhere, so just leave MRP frames to go to CPU queue 0
unless needed otherwise.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 16 Feb 2022 14:30:05 +0000 (16:30 +0200)]
net: mscc: ocelot: consolidate cookie allocation for private VCAP rules
Every use case that needed VCAP filters (in order: DSA tag_8021q, MRP,
PTP traps) has hardcoded filter identifiers that worked well enough for
that use case alone. But when two or more of those use cases would be
used together, some of those identifiers would overlap, leading to
breakage.
Add definitions for each cookie and centralize them in ocelot_vcap.h,
such that the overlaps are more obvious.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 16 Feb 2022 14:30:04 +0000 (16:30 +0200)]
net: mscc: ocelot: use a consistent cookie for MRP traps
The driver uses an identifier equal to (ocelot->num_phys_ports + port)
for MRP traps installed when the system is in the role of an MRC, and an
identifier equal to (port) otherwise.
Use the same identifier in both cases as a consolidation for the various
cookie values spread throughout the driver.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 17 Feb 2022 10:57:21 +0000 (10:57 +0000)]
Merge tag 'mlx5-updates-2022-02-16' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2022-02-16
Misc updates for mlx5:
1) Alex Liu Adds support for using xdp->data_meta
2) Aya Levin Adds PTP counters and port time stamp mode for representors and
switchdev mode.
3) Tariq Toukan, Striding RQ simple improvements.
4) Roi Dayan (7): Create multiple attr instances per flow
Some TC actions use post actions for their implementation.
For example CT and sample actions.
Create a new flow attr instance after each multi table action and
create a post action rule for it as a generic parsing step.
Now multi table actions like CT, sample don't require to do it.
When flow has multiple attr instances, the first flow attr is being
offloaded normally and linked to the next attr (post action rule) by
setting an id on reg_c for matching.
Post action rule (rule created from second attr instance) match the
id on reg_c and does rest of the actions.
Example rule with actions CT,goto will be created with 2 attr instances
as following: attr1(CT)->attr2(goto)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnaldo Carvalho de Melo [Wed, 16 Feb 2022 19:01:00 +0000 (16:01 -0300)]
perf bpf: Defer freeing string after possible strlen() on it
This was detected by the gcc in Fedora Rawhide's gcc:
50 11.01 fedora:rawhide : FAIL gcc version 12.0.1
20220205 (Red Hat 12.0.1-0) (GCC)
inlined from 'bpf__config_obj' at util/bpf-loader.c:1242:9:
util/bpf-loader.c:1225:34: error: pointer 'map_opt' may be used after 'free' [-Werror=use-after-free]
1225 | *key_scan_pos += strlen(map_opt);
| ^~~~~~~~~~~~~~~
util/bpf-loader.c:1223:9: note: call to 'free' here
1223 | free(map_name);
| ^~~~~~~~~~~~~~
cc1: all warnings being treated as errors
So do the calculations on the pointer before freeing it.
Fixes:
04f9bf2bac72480c ("perf bpf-loader: Add missing '*' for key_scan_pos")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/lkml/Yg1VtQxKrPpS3uNA@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Roi Dayan [Thu, 2 Dec 2021 12:47:45 +0000 (14:47 +0200)]
net/mlx5e: TC, Allow sample action with CT
Allow sample+CT actions but still block sample+CT NAT
as it is not supported.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Roi Dayan [Sun, 19 Dec 2021 08:31:18 +0000 (10:31 +0200)]
net/mlx5e: TC, Make post_act parse CT and sample actions
Before this commit post_act can be used for normal rules
and didn't handle special cases like CT and sample.
With this commit post_act rule can also handle the special cases
when needed.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Roi Dayan [Sun, 21 Nov 2021 09:38:53 +0000 (11:38 +0200)]
net/mlx5e: TC, Clean redundant counter flag from tc action parsers
When tc actions being parsed only the last flow attr created needs the
counter flag and the previous flags being reset.
Clean the flag from the tc action parsers.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Roi Dayan [Wed, 1 Dec 2021 11:27:37 +0000 (13:27 +0200)]
net/mlx5e: Use multi table support for CT and sample actions
CT and sample actions use post actions for their implementation.
Flag those actions as multi table actions so the post act infrastructure
will handle the post actions allocation.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Roi Dayan [Sun, 8 Aug 2021 06:38:03 +0000 (09:38 +0300)]
net/mlx5e: Create new flow attr for multi table actions
Some TC actions use post actions for their implementation.
For example CT and sample actions.
Create a new flow attr after each multi table action and
create a post action rule for it.
First flow attr being offloaded normally and linked to the next
attr (post action rule) with setting an id on reg_c.
Post action rules match the id on reg_c and continue to the next one.
The flow counter is allocated on the last rule.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Roi Dayan [Thu, 14 Oct 2021 08:31:51 +0000 (11:31 +0300)]
net/mlx5e: Add post act offload/unoffload API
Introduce mlx5e_tc_post_act_offload() and mlx5e_tc_post_act_unoffload()
to be able to unoffload and reoffload existing post action rules handles.
For example in neigh update events, the driver removes and readds rules in
hardware.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Roi Dayan [Sun, 12 Sep 2021 08:43:17 +0000 (11:43 +0300)]
net/mlx5e: Pass actions param to actions_match_supported()
Currently the mlx5_flow object contains a single mlx5_attr instance.
However, multi table actions (e.g. CT) instantiate multiple attr instances.
Currently action_match_supported() reads the actions flag from the
flow's attribute instance. Modify the function to receive the action
flags as a parameter which is set by the calling function and
pass the aggregated actions to actions_match_supported().
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Paul Blakey [Mon, 24 Jan 2022 13:03:27 +0000 (15:03 +0200)]
net/mlx5e: TC, Move flow hashtable to be per rep
To allow shared tc block offload between two or more reps of the
same eswitch, move the tc flow hashtable to be per rep, instead
of per eswitch.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Aya Levin [Thu, 20 Jan 2022 15:53:06 +0000 (17:53 +0200)]
net/mlx5e: E-Switch, Add support for tx_port_ts in switchdev mode
When turning on tx_port_ts (private flag) a PTP-SQ is created. Consider
this queue when adding rules matching SQs to VPORTs. Otherwise the
traffic on this queue won't reach the wire.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Aya Levin [Wed, 19 Jan 2022 16:28:20 +0000 (18:28 +0200)]
net/mlx5e: E-Switch, Add PTP counters for uplink representor
There is a configuration where the uplink interface is the synchronizer.
Add PTP counters for this interface for monitoring.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tariq Toukan [Wed, 19 Jan 2022 16:35:42 +0000 (18:35 +0200)]
net/mlx5e: RX, Restrict bulk size for small Striding RQs
In RQs of type multi-packet WQE (Striding RQ), each WQE is relatively
large (typically 256KB) but their number is relatively small (8 in
default).
Re-mapping the descriptors' buffers before re-posting them is done via
UMR (User-Mode Memory Registration) operations.
On the one hand, posting UMR WQEs in bulks reduces communication overhead
with the HW and better utilizes its processing units.
On the other hand, delaying the WQE repost operations for a small RQ
(say, of 4 WQEs) might drastically hit its performance, causing packet
drops due to no receive buffer, for high or bursty incoming packets rate.
Here we restrict the bulk size for too small RQs. Effectively, with the current
constants, RQ of size 4 (minimum allowed) would have no bulking, while larger
RQs will continue working with bulks of 2.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tariq Toukan [Tue, 11 Jan 2022 16:28:12 +0000 (18:28 +0200)]
net/mlx5e: Default to Striding RQ when not conflicting with CQE compression
CQE compression is turned on by default on slow pci systems to help
reduce the load on pci.
In this case, Striding RQ was turned off as CQEs of packets that span
several strides were not compressed, significantly reducing the compression
effectiveness.
This issue does not exist when using the newer mini_cqe format "stride_index".
Hence, allow defaulting to Striding RQ in this case.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tariq Toukan [Wed, 5 Jan 2022 21:18:36 +0000 (23:18 +0200)]
net/mlx5e: Generalize packet merge error message
Update the old error message for LRO state modify with the new
general name.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Khalid Manaa <khalidm@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Alex Liu [Thu, 20 Jan 2022 19:34:59 +0000 (11:34 -0800)]
net/mlx5e: Add support for using xdp->data_meta
Add support for using xdp->data_meta for cross-program communication
Pass "true" to the last argument of xdp_prepare_buff().
After SKB is built, call skb_metadata_set() if metadata was pushed.
Signed-off-by: Alex Liu <liualex@fb.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Colin Ian King [Mon, 31 Jan 2022 08:43:17 +0000 (08:43 +0000)]
net/mlx5e: Fix spelling mistake "supoported" -> "supported"
There is a spelling mistake in a NL_SET_ERR_MSG_MOD error
message. Fix it.
Fixes:
3b49a7edec1d ("net/mlx5e: TC, Reject rules with multiple CT actions")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Petr Machata [Wed, 16 Feb 2022 14:31:36 +0000 (15:31 +0100)]
net: rtnetlink: rtnl_stats_get(): Emit an extack for unset filter_mask
Both get and dump handlers for RTM_GETSTATS require that a filter_mask, a
mask of which attributes should be emitted in the netlink response, is
unset. rtnl_stats_dump() does include an extack in the bounce,
rtnl_stats_get() however does not. Fix the omission.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/01feb1f4bbd22a19f6629503c4f366aed6424567.1645020876.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 17 Feb 2022 04:52:09 +0000 (20:52 -0800)]
Merge branch 'mptcp-so_sndtimeo-and-misc-cleanup'
Mat Martineau says:
====================
mptcp: SO_SNDTIMEO and misc. cleanup
Patch 1 adds support for the SO_SNDTIMEO socket option on MPTCP sockets.
The remaining patches are various small cleanups:
Patch 2 removes an obsolete declaration.
Patches 3 and 5 remove unnecessary function parameters.
Patch 4 removes an extra cast.
Patches 6 and 7 add some const and ro_after_init modifiers.
Patch 8 removes extra storage of TCP helpers.
====================
Link: https://lore.kernel.org/r/20220216021130.171786-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal [Wed, 16 Feb 2022 02:11:30 +0000 (18:11 -0800)]
mptcp: don't save tcp data_ready and write space callbacks
Assign the helpers directly rather than save/restore in the context
structure.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal [Wed, 16 Feb 2022 02:11:29 +0000 (18:11 -0800)]
mptcp: mark ops structures as ro_after_init
These structures are initialised from the init hooks, so we can't make
them 'const'. But no writes occur afterwards, so we can use ro_after_init.
Also, remove bogus EXPORT_SYMBOL, the only access comes from ip
stack, not from kernel modules.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Wed, 16 Feb 2022 02:11:28 +0000 (18:11 -0800)]
mptcp: constify a bunch of of helpers
A few pm-related helpers don't touch arguments which lacking
the const modifier, let's constify them.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Wed, 16 Feb 2022 02:11:27 +0000 (18:11 -0800)]
mptcp: drop port parameter of mptcp_pm_add_addr_signal
Drop the port parameter of mptcp_pm_add_addr_signal() and reflect it to
avoid passing too many parameters.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Wed, 16 Feb 2022 02:11:26 +0000 (18:11 -0800)]
mptcp: drop unneeded type casts for hmac
Drop the unneeded type casts to 'unsigned long long' for printing out the
hmac values in add_addr_hmac_valid() and subflow_thmac_valid().
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Wed, 16 Feb 2022 02:11:25 +0000 (18:11 -0800)]
mptcp: drop unused sk in mptcp_get_options
The parameter 'sk' became useless since the code using it was dropped
from mptcp_get_options() in the commit
8d548ea1dd15 ("mptcp: do not set
unconditionally csum_reqd on incoming opt"). Let's drop it.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts [Wed, 16 Feb 2022 02:11:24 +0000 (18:11 -0800)]
mptcp: mptcp_parse_option is no longer exported
Options parsing in now done from mptcp_incoming_options().
mptcp_parse_option() has been removed from mptcp.h when CONFIG_MPTCP is
defined but not when it is not.
Fixes:
cfde141ea3fa ("mptcp: move option parsing into mptcp_incoming_options()")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Wed, 16 Feb 2022 02:11:23 +0000 (18:11 -0800)]
mptcp: add SNDTIMEO setsockopt support
Add setsockopt support for SO_SNDTIMEO_OLD and SO_SNDTIMEO_NEW to fix this
error reported by the mptcp bpf selftest:
(network_helpers.c:64: errno: Operation not supported) Failed to set SO_SNDTIMEO
test_mptcp:FAIL:115
All error logs:
(network_helpers.c:64: errno: Operation not supported) Failed to set SO_SNDTIMEO
test_mptcp:FAIL:115
Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yang Li [Wed, 16 Feb 2022 01:45:07 +0000 (09:45 +0800)]
net: Fix an ignored error return from dm9051_get_regs()
The return from the call to dm9051_get_regs() is int, it can be
a negative error code, however this is being assigned to an unsigned
int variable 'ret', so making 'ret' an int.
Eliminate the following coccicheck warning:
./drivers/net/ethernet/davicom/dm9051.c:527:5-8: WARNING: Unsigned
expression compared with zero: ret < 0
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220216014507.109117-1-yang.lee@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Tue, 15 Feb 2022 23:53:05 +0000 (15:53 -0800)]
net: sched: limit TC_ACT_REPEAT loops
We have been living dangerously, at the mercy of malicious users,
abusing TC_ACT_REPEAT, as shown by this syzpot report [1].
Add an arbitrary limit (32) to the number of times an action can
return TC_ACT_REPEAT.
v2: switch the limit to 32 instead of 10.
Use net_warn_ratelimited() instead of pr_err_once().
[1] (C repro available on demand)
rcu: INFO: rcu_preempt self-detected stall on CPU
rcu: 1-...!: (10500 ticks this GP) idle=021/1/0x4000000000000000 softirq=5592/5592 fqs=0
(t=10502 jiffies g=5305 q=190)
rcu: rcu_preempt kthread timer wakeup didn't happen for 10502 jiffies! g5305 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402
rcu: Possible timer handling issue on cpu=0 timer-softirq=3527
rcu: rcu_preempt kthread starved for 10505 jiffies! g5305 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0
rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_preempt state:I stack:29344 pid: 14 ppid: 2 flags:0x00004000
Call Trace:
<TASK>
context_switch kernel/sched/core.c:4986 [inline]
__schedule+0xab2/0x4db0 kernel/sched/core.c:6295
schedule+0xd2/0x260 kernel/sched/core.c:6368
schedule_timeout+0x14a/0x2a0 kernel/time/timer.c:1881
rcu_gp_fqs_loop+0x186/0x810 kernel/rcu/tree.c:1963
rcu_gp_kthread+0x1de/0x320 kernel/rcu/tree.c:2136
kthread+0x2e9/0x3a0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
rcu: Stack dump where RCU GP kthread last ran:
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
CPU: 0 PID: 3646 Comm: syz-executor358 Not tainted 5.17.0-rc3-syzkaller-00149-gbf8e59fd315f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:rep_nop arch/x86/include/asm/vdso/processor.h:13 [inline]
RIP: 0010:cpu_relax arch/x86/include/asm/vdso/processor.h:18 [inline]
RIP: 0010:pv_wait_head_or_lock kernel/locking/qspinlock_paravirt.h:437 [inline]
RIP: 0010:__pv_queued_spin_lock_slowpath+0x3b8/0xb40 kernel/locking/qspinlock.c:508
Code: 48 89 eb c6 45 01 01 41 bc 00 80 00 00 48 c1 e9 03 83 e3 07 41 be 01 00 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8d 2c 01 eb 0c <f3> 90 41 83 ec 01 0f 84 72 04 00 00 41 0f b6 45 00 38 d8 7f 08 84
RSP: 0018:
ffffc9000283f1b0 EFLAGS:
00000206
RAX:
0000000000000003 RBX:
0000000000000000 RCX:
1ffff1100fc0071e
RDX:
0000000000000001 RSI:
0000000000000201 RDI:
0000000000000000
RBP:
ffff88807e0038f0 R08:
0000000000000001 R09:
ffffffff8ffbf9ff
R10:
0000000000000001 R11:
0000000000000001 R12:
0000000000004c1e
R13:
ffffed100fc0071e R14:
0000000000000001 R15:
ffff8880b9c3aa80
FS:
00005555562bf300(0000) GS:
ffff8880b9c00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007ffdbfef12b8 CR3:
00000000723c2000 CR4:
00000000003506f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
pv_queued_spin_lock_slowpath arch/x86/include/asm/paravirt.h:591 [inline]
queued_spin_lock_slowpath arch/x86/include/asm/qspinlock.h:51 [inline]
queued_spin_lock include/asm-generic/qspinlock.h:85 [inline]
do_raw_spin_lock+0x200/0x2b0 kernel/locking/spinlock_debug.c:115
spin_lock_bh include/linux/spinlock.h:354 [inline]
sch_tree_lock include/net/sch_generic.h:610 [inline]
sch_tree_lock include/net/sch_generic.h:605 [inline]
prio_tune+0x3b9/0xb50 net/sched/sch_prio.c:211
prio_init+0x5c/0x80 net/sched/sch_prio.c:244
qdisc_create.constprop.0+0x44a/0x10f0 net/sched/sch_api.c:1253
tc_modify_qdisc+0x4c5/0x1980 net/sched/sch_api.c:1660
rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5594
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343
netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:725
____sys_sendmsg+0x6e8/0x810 net/socket.c:2413
___sys_sendmsg+0xf3/0x170 net/socket.c:2467
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2496
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f7ee98aae99
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007ffdbfef12d8 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
00007ffdbfef1300 RCX:
00007f7ee98aae99
RDX:
0000000000000000 RSI:
0000000020000000 RDI:
0000000000000003
RBP:
0000000000000000 R08:
000000000000000d R09:
000000000000000d
R10:
000000000000000d R11:
0000000000000246 R12:
00007ffdbfef12f0
R13:
00000000000f4240 R14:
000000000004ca47 R15:
00007ffdbfef12e4
</TASK>
INFO: NMI handler (nmi_cpu_backtrace_handler) took too long to run: 2.293 msecs
NMI backtrace for cpu 1
CPU: 1 PID: 3260 Comm: kworker/1:3 Not tainted 5.17.0-rc3-syzkaller-00149-gbf8e59fd315f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: mld mld_ifc_work
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
nmi_cpu_backtrace.cold+0x47/0x144 lib/nmi_backtrace.c:111
nmi_trigger_cpumask_backtrace+0x1b3/0x230 lib/nmi_backtrace.c:62
trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline]
rcu_dump_cpu_stacks+0x25e/0x3f0 kernel/rcu/tree_stall.h:343
print_cpu_stall kernel/rcu/tree_stall.h:604 [inline]
check_cpu_stall kernel/rcu/tree_stall.h:688 [inline]
rcu_pending kernel/rcu/tree.c:3919 [inline]
rcu_sched_clock_irq.cold+0x5c/0x759 kernel/rcu/tree.c:2617
update_process_times+0x16d/0x200 kernel/time/timer.c:1785
tick_sched_handle+0x9b/0x180 kernel/time/tick-sched.c:226
tick_sched_timer+0x1b0/0x2d0 kernel/time/tick-sched.c:1428
__run_hrtimer kernel/time/hrtimer.c:1685 [inline]
__hrtimer_run_queues+0x1c0/0xe50 kernel/time/hrtimer.c:1749
hrtimer_interrupt+0x31c/0x790 kernel/time/hrtimer.c:1811
local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1086 [inline]
__sysvec_apic_timer_interrupt+0x146/0x530 arch/x86/kernel/apic/apic.c:1103
sysvec_apic_timer_interrupt+0x8e/0xc0 arch/x86/kernel/apic/apic.c:1097
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638
RIP: 0010:__sanitizer_cov_trace_const_cmp4+0xc/0x70 kernel/kcov.c:286
Code: 00 00 00 48 89 7c 30 e8 48 89 4c 30 f0 4c 89 54 d8 20 48 89 10 5b c3 0f 1f 80 00 00 00 00 41 89 f8 bf 03 00 00 00 4c 8b 14 24 <89> f1 65 48 8b 34 25 00 70 02 00 e8 14 f9 ff ff 84 c0 74 4b 48 8b
RSP: 0018:
ffffc90002c5eea8 EFLAGS:
00000246
RAX:
0000000000000007 RBX:
ffff88801c625800 RCX:
0000000000000000
RDX:
0000000000000000 RSI:
0000000000000000 RDI:
0000000000000003
RBP:
ffff8880137d3100 R08:
0000000000000000 R09:
0000000000000000
R10:
ffffffff874fcd88 R11:
0000000000000000 R12:
ffff88801d692dc0
R13:
ffff8880137d3104 R14:
0000000000000000 R15:
ffff88801d692de8
tcf_police_act+0x358/0x11d0 net/sched/act_police.c:256
tcf_action_exec net/sched/act_api.c:1049 [inline]
tcf_action_exec+0x1a6/0x530 net/sched/act_api.c:1026
tcf_exts_exec include/net/pkt_cls.h:326 [inline]
route4_classify+0xef0/0x1400 net/sched/cls_route.c:179
__tcf_classify net/sched/cls_api.c:1549 [inline]
tcf_classify+0x3e8/0x9d0 net/sched/cls_api.c:1615
prio_classify net/sched/sch_prio.c:42 [inline]
prio_enqueue+0x3a7/0x790 net/sched/sch_prio.c:75
dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3668
__dev_xmit_skb net/core/dev.c:3756 [inline]
__dev_queue_xmit+0x1f61/0x3660 net/core/dev.c:4081
neigh_hh_output include/net/neighbour.h:533 [inline]
neigh_output include/net/neighbour.h:547 [inline]
ip_finish_output2+0x14dc/0x2170 net/ipv4/ip_output.c:228
__ip_finish_output net/ipv4/ip_output.c:306 [inline]
__ip_finish_output+0x396/0x650 net/ipv4/ip_output.c:288
ip_finish_output+0x32/0x200 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip_output+0x196/0x310 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:451 [inline]
ip_local_out+0xaf/0x1a0 net/ipv4/ip_output.c:126
iptunnel_xmit+0x628/0xa50 net/ipv4/ip_tunnel_core.c:82
geneve_xmit_skb drivers/net/geneve.c:966 [inline]
geneve_xmit+0x10c8/0x3530 drivers/net/geneve.c:1077
__netdev_start_xmit include/linux/netdevice.h:4683 [inline]
netdev_start_xmit include/linux/netdevice.h:4697 [inline]
xmit_one net/core/dev.c:3473 [inline]
dev_hard_start_xmit+0x1eb/0x920 net/core/dev.c:3489
__dev_queue_xmit+0x2985/0x3660 net/core/dev.c:4116
neigh_hh_output include/net/neighbour.h:533 [inline]
neigh_output include/net/neighbour.h:547 [inline]
ip6_finish_output2+0xf7a/0x14f0 net/ipv6/ip6_output.c:126
__ip6_finish_output net/ipv6/ip6_output.c:191 [inline]
__ip6_finish_output+0x61e/0xe90 net/ipv6/ip6_output.c:170
ip6_finish_output+0x32/0x200 net/ipv6/ip6_output.c:201
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:224
dst_output include/net/dst.h:451 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
NF_HOOK include/linux/netfilter.h:301 [inline]
mld_sendpack+0x9a3/0xe40 net/ipv6/mcast.c:1826
mld_send_cr net/ipv6/mcast.c:2127 [inline]
mld_ifc_work+0x71c/0xdc0 net/ipv6/mcast.c:2659
process_one_work+0x9ac/0x1650 kernel/workqueue.c:2307
worker_thread+0x657/0x1110 kernel/workqueue.c:2454
kthread+0x2e9/0x3a0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
----------------
Code disassembly (best guess):
0: 48 89 eb mov %rbp,%rbx
3: c6 45 01 01 movb $0x1,0x1(%rbp)
7: 41 bc 00 80 00 00 mov $0x8000,%r12d
d: 48 c1 e9 03 shr $0x3,%rcx
11: 83 e3 07 and $0x7,%ebx
14: 41 be 01 00 00 00 mov $0x1,%r14d
1a: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax
21: fc ff df
24: 4c 8d 2c 01 lea (%rcx,%rax,1),%r13
28: eb 0c jmp 0x36
* 2a: f3 90 pause <-- trapping instruction
2c: 41 83 ec 01 sub $0x1,%r12d
30: 0f 84 72 04 00 00 je 0x4a8
36: 41 0f b6 45 00 movzbl 0x0(%r13),%eax
3b: 38 d8 cmp %bl,%al
3d: 7f 08 jg 0x47
3f: 84 .byte 0x84
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220215235305.3272331-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jon Maloy [Wed, 16 Feb 2022 02:00:09 +0000 (21:00 -0500)]
tipc: fix wrong notification node addresses
The previous bug fix had an unfortunate side effect that broke
distribution of binding table entries between nodes. The updated
tipc_sock_addr struct is also used further down in the same
function, and there the old value is still the correct one.
Fixes:
032062f363b4 ("tipc: fix wrong publisher node address in link publications")
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Link: https://lore.kernel.org/r/20220216020009.3404578-1-jmaloy@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexey Khoroshilov [Tue, 15 Feb 2022 10:42:48 +0000 (13:42 +0300)]
net: dsa: lantiq_gswip: fix use after free in gswip_remove()
of_node_put(priv->ds->slave_mii_bus->dev.of_node) should be
done before mdiobus_free(priv->ds->slave_mii_bus).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes:
0d120dfb5d67 ("net: dsa: lantiq_gswip: don't use devres for mdiobus")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/1644921768-26477-1-git-send-email-khoroshilov@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Willem de Bruijn [Tue, 15 Feb 2022 16:00:37 +0000 (11:00 -0500)]
ipv6: per-netns exclusive flowlabel checks
Ipv6 flowlabels historically require a reservation before use.
Optionally in exclusive mode (e.g., user-private).
Commit
59c820b2317f ("ipv6: elide flowlabel check if no exclusive
leases exist") introduced a fastpath that avoids this check when no
exclusive leases exist in the system, and thus any flowlabel use
will be granted.
That allows skipping the control operation to reserve a flowlabel
entirely. Though with a warning if the fast path fails:
This is an optimization. Robust applications still have to revert to
requesting leases if the fast path fails due to an exclusive lease.
Still, this is subtle. Better isolate network namespaces from each
other. Flowlabels are per-netns. Also record per-netns whether
exclusive leases are in use. Then behavior does not change based on
activity in other netns.
Changes
v2
- wrap in IS_ENABLED(CONFIG_IPV6) to avoid breakage if disabled
Fixes:
59c820b2317f ("ipv6: elide flowlabel check if no exclusive leases exist")
Link: https://lore.kernel.org/netdev/MWHPR2201MB1072BCCCFCE779E4094837ACD0329@MWHPR2201MB1072.namprd22.prod.outlook.com/
Reported-by: Congyu Liu <liu3101@purdue.edu>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Tested-by: Congyu Liu <liu3101@purdue.edu>
Link: https://lore.kernel.org/r/20220215160037.1976072-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 15 Feb 2022 20:47:22 +0000 (22:47 +0200)]
net: dsa: tag_8021q: only call skb_push/skb_pull around __skb_vlan_pop
__skb_vlan_pop() needs skb->data to point at the mac_header, while
skb_vlan_tag_present() and skb_vlan_tag_get() don't, because they don't
look at skb->data at all.
So we can avoid uselessly moving around skb->data for the case where the
VLAN tag was offloaded by the DSA master.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220215204722.2134816-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oleksandr Mazur [Tue, 15 Feb 2022 16:53:03 +0000 (18:53 +0200)]
net: bridge: multicast: notify switchdev driver whenever MC processing gets disabled
Whenever bridge driver hits the max capacity of MDBs, it disables
the MC processing (by setting corresponding bridge option), but never
notifies switchdev about such change (the notifiers are called only upon
explicit setting of this option, through the registered netlink interface).
This could lead to situation when Software MDB processing gets disabled,
but this event never gets offloaded to the underlying Hardware.
Fix this by adding a notify message in such case.
Fixes:
147c1e9b902c ("switchdev: bridge: Offload multicast disabled")
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20220215165303.31908-1-oleksandr.mazur@plvision.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tom Rix [Tue, 15 Feb 2022 21:38:02 +0000 (13:38 -0800)]
net: ethernet: altera: cleanup comments
Replacements:
queueing to queuing
trasfer to transfer
aditional to additional
adaptor to adapter
transactino to transaction
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20220215213802.3043178-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
D. Wythe [Tue, 15 Feb 2022 08:24:50 +0000 (16:24 +0800)]
net/smc: return ETIMEDOUT when smc_connect_clc() timeout
When smc_connect_clc() times out, it will return -EAGAIN(tcp_recvmsg
retuns -EAGAIN while timeout), then this value will passed to the
application, which is quite confusing to the applications, makes
inconsistency with TCP.
From the manual of connect, ETIMEDOUT is more suitable, and this patch
try convert EAGAIN to ETIMEDOUT in that case.
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/1644913490-21594-1-git-send-email-alibuda@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
YueHaibing [Wed, 16 Feb 2022 11:35:07 +0000 (19:35 +0800)]
net: hns3: Remove unused inline function hclge_is_reset_pending()
This is unused since commit
8e2288cad6cb ("net: hns3: refactor PF
cmdq init and uninit APIs with new common APIs").
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Jie Wang <wangjie125@huawei.com>
Link: https://lore.kernel.org/r/20220216113507.22368-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrii Nakryiko [Wed, 16 Feb 2022 23:35:40 +0000 (15:35 -0800)]
bpftool: Fix C++ additions to skeleton
Mark C++-specific T::open() and other methods as static inline to avoid
symbol redefinition when multiple files use the same skeleton header in
an application.
Fixes:
bb8ffe61ea45 ("bpftool: Add C++-specific open/load/etc skeleton wrappers")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220216233540.216642-1-andrii@kernel.org
Jiri Olsa [Wed, 16 Feb 2022 09:21:02 +0000 (10:21 +0100)]
bpftool: Fix pretty print dump for maps without BTF loaded
The commit
e5043894b21f ("bpftool: Use libbpf_get_error() to check error")
fails to dump map without BTF loaded in pretty mode (-p option).
Fixing this by making sure get_map_kv_btf won't fail in case there's
no BTF available for the map.
Fixes:
e5043894b21f ("bpftool: Use libbpf_get_error() to check error")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220216092102.125448-1-jolsa@kernel.org
Dmitry Torokhov [Tue, 15 Feb 2022 21:11:42 +0000 (13:11 -0800)]
module: fix building with sysfs disabled
Sysfs support might be disabled so we need to guard the code that
instantiates "compression" attribute with an #ifdef.
Fixes:
b1ae6dc41eaa ("module: add in-kernel support for decompressing")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Kumar Kartikeya Dwivedi [Wed, 16 Feb 2022 20:19:43 +0000 (01:49 +0530)]
bpf: Fix crash due to out of bounds access into reg2btf_ids.
When commit
e6ac2450d6de ("bpf: Support bpf program calling kernel function") added
kfunc support, it defined reg2btf_ids as a cheap way to translate the verifier
reg type to the appropriate btf_vmlinux BTF ID, however
commit
c25b2ae13603 ("bpf: Replace PTR_TO_XXX_OR_NULL with PTR_TO_XXX | PTR_MAYBE_NULL")
moved the __BPF_REG_TYPE_MAX from the last member of bpf_reg_type enum to after
the base register types, and defined other variants using type flag
composition. However, now, the direct usage of reg->type to index into
reg2btf_ids may no longer fall into __BPF_REG_TYPE_MAX range, and hence lead to
out of bounds access and kernel crash on dereference of bad pointer.
Fixes:
c25b2ae13603 ("bpf: Replace PTR_TO_XXX_OR_NULL with PTR_TO_XXX | PTR_MAYBE_NULL")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220216201943.624869-1-memxor@gmail.com