review.tizen.org Git - platform/kernel/linux-starfive.git/log

bus: mhi: host: Fix race between channel preparation and M0 event

commit 869a99907faea6d1835b0bd0d0422ae3519c6ea9 upstream.

There is a race condition where mhi_prepare_channel() updates the
read and write pointers as the base address and in parallel, if
an M0 transition occurs, the tasklet goes ahead and rings
doorbells for all channels with a delta in TRE rings assuming
they are already enabled. This causes a null pointer access. Fix
it by adding a channel enabled check before ringing channel
doorbells.

Cc: stable@vger.kernel.org # 5.19
Fixes: a6e2e3522f29 "bus: mhi: core: Add support for PM state transitions"
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1665889532-13634-1-git-send-email-quic_qianyu@quicinc.com
[mani: CCed stable list]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver core: Fix bus_type.match() error handling in __driver_attach()

commit 27c0d217340e47ec995557f61423ef415afba987 upstream.

When a driver registers with a bus, it will attempt to match with every
device on the bus through the __driver_attach() function. Currently, if
the bus_type.match() function encounters an error that is not
-EPROBE_DEFER, __driver_attach() will return a negative error code, which
causes the driver registration logic to stop trying to match with the
remaining devices on the bus.

This behavior is not correct; a failure while matching a driver to a
device does not mean that the driver won't be able to match and bind
with other devices on the bus. Update the logic in __driver_attach()
to reflect this.

Fixes: 656b8035b0ee ("ARM: 8524/1: driver cohandle -EPROBE_DEFER from bus_type.match()")
Cc: stable@vger.kernel.org
Cc: Saravana Kannan <saravanak@google.com>
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Link: https://lore.kernel.org/r/20220921001414.4046492-1-isaacmanjarres@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: ccp - Add support for TEE for PCI ID 0x14CA

commit 10da230a4df1dfe32a58eb09246f5ffe82346f27 upstream.

SoCs containing 0x14CA are present both in datacenter parts that
support SEV as well as client parts that support TEE.

Cc: stable@vger.kernel.org # 5.15+
Tested-by: Rijo-john Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: n2 - add missing hash statesize

commit 76a4e874593543a2dff91d249c95bac728df2774 upstream.

Add missing statesize to hash templates.
This is mandatory otherwise no algorithms can be registered as the core
requires statesize to be set.

CC: stable@kernel.org # 4.3+
Reported-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Tested-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Fixes: 0a625fd2abaa ("crypto: n2 - Add Niagara2 crypto driver")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: mm: notify remote harts about mmu cache updates

commit 4bd1d80efb5af640f99157f39b50fb11326ce641 upstream.

Current implementation of update_mmu_cache function performs local TLB
flush. It does not take into account ASID information. Besides, it does
not take into account other harts currently running the same mm context
or possible migration of the running context to other harts. Meanwhile
TLB flush is not performed for every context switch if ASID support
is enabled.

Patch [1] proposed to add ASID support to update_mmu_cache to avoid
flushing local TLB entirely. This patch takes into account other
harts currently running the same mm context as well as possible
migration of this context to other harts.

For this purpose the approach from flush_icache_mm is reused. Remote
harts currently running the same mm context are informed via SBI calls
that they need to flush their local TLBs. All the other harts are marked
as needing a deferred TLB flush when this mm context runs on them.

[1] https://lore.kernel.org/linux-riscv/20220821013926.8968-1-tjytimi@163.com/

Signed-off-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Fixes: 65d4b9c53017 ("RISC-V: Implement ASID allocator")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-riscv/20220829205219.283543-1-geomatsi@gmail.com/#t
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: stacktrace: Fixup ftrace_graph_ret_addr retp argument

commit 5c3022e4a616d800cf5f4c3a981d7992179e44a1 upstream.

The 'retp' is a pointer to the return address on the stack, so we
must pass the current return address pointer as the 'retp'
argument to ftrace_push_return_trace(). Not parent function's
return address on the stack.

Fixes: b785ec129bd9 ("riscv/ftrace: Add HAVE_FUNCTION_GRAPH_RET_ADDR_PTR support")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20221109064937.3643993-2-guoren@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RISC-V: kexec: Fix memory leak of elf header buffer

commit cbc32023ddbdf4baa3d9dc513a2184a84080a5a2 upstream.

This is reported by kmemleak detector:

unreferenced object 0xff2000000403d000 (size 4096):
  comm "kexec", pid 146, jiffies 4294900633 (age 64.792s)
  hex dump (first 32 bytes):
    7f 45 4c 46 02 01 01 00 00 00 00 00 00 00 00 00  .ELF............
    04 00 f3 00 01 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000566ca97c>] kmemleak_vmalloc+0x3c/0xbe
    [<00000000979283d8>] __vmalloc_node_range+0x3ac/0x560
    [<00000000b4b3712a>] __vmalloc_node+0x56/0x62
    [<00000000854f75e2>] vzalloc+0x2c/0x34
    [<00000000e9a00db9>] crash_prepare_elf64_headers+0x80/0x30c
    [<0000000067e8bf48>] elf_kexec_load+0x3e8/0x4ec
    [<0000000036548e09>] kexec_image_load_default+0x40/0x4c
    [<0000000079fbe1b4>] sys_kexec_file_load+0x1c4/0x322
    [<0000000040c62c03>] ret_from_syscall+0x0/0x2

In elf_kexec_load(), a buffer is allocated via vzalloc() to store elf
headers.  While it's not freed back to system when kdump kernel is
reloaded or unloaded, or when image->elf_header is successfully set and
then fails to load kdump kernel for some reason. Fix it by freeing the
buffer in arch_kimage_file_post_load_cleanup().

Fixes: 8acea455fafa ("RISC-V: Support for kexec_file on panic")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221104095658.141222-2-lihuafei1@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Fixup compile error with !MMU

commit c528ef0888b75f673f7d48022de8d31d5b451e8c upstream.

Current nommu_virt_defconfig can't compile:

In file included from
arch/riscv/kernel/crash_core.c:3:
arch/riscv/kernel/crash_core.c:
In function 'arch_crash_save_vmcoreinfo':
arch/riscv/kernel/crash_core.c:8:27:
error: 'VA_BITS' undeclared (first use in this function)
8 | VMCOREINFO_NUMBER(VA_BITS);
| ^~~~~~~

Add MMU dependency for KEXEC_FILE.

Fixes: 6261586e0c91 ("RISC-V: Add kexec_file support")
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221207091112.2258674-1-guoren@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RISC-V: kexec: Fix memory leak of fdt buffer

commit 96df59b1ae23f5c11698c3c2159aeb2ecd4944a4 upstream.

This is reported by kmemleak detector:

unreferenced object 0xff60000082864000 (size 9588):
  comm "kexec", pid 146, jiffies 4294900634 (age 64.788s)
  hex dump (first 32 bytes):
    d0 0d fe ed 00 00 12 ed 00 00 00 48 00 00 11 40  ...........H...@
    00 00 00 28 00 00 00 11 00 00 00 02 00 00 00 00  ...(............
  backtrace:
    [<00000000f95b17c4>] kmemleak_alloc+0x34/0x3e
    [<00000000b9ec8e3e>] kmalloc_order+0x9c/0xc4
    [<00000000a95cf02e>] kmalloc_order_trace+0x34/0xb6
    [<00000000f01e68b4>] __kmalloc+0x5c2/0x62a
    [<000000002bd497b2>] kvmalloc_node+0x66/0xd6
    [<00000000906542fa>] of_kexec_alloc_and_setup_fdt+0xa6/0x6ea
    [<00000000e1166bde>] elf_kexec_load+0x206/0x4ec
    [<0000000036548e09>] kexec_image_load_default+0x40/0x4c
    [<0000000079fbe1b4>] sys_kexec_file_load+0x1c4/0x322
    [<0000000040c62c03>] ret_from_syscall+0x0/0x2

In elf_kexec_load(), a buffer is allocated via kvmalloc() to store fdt.
While it's not freed back to system when kexec kernel is reloaded or
unloaded.  Then memory leak is caused.  Fix it by introducing riscv
specific function arch_kimage_file_post_load_cleanup(), and freeing the
buffer there.

Fixes: 6261586e0c91 ("RISC-V: Add kexec_file support")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Liao Chang <liaochang1@huawei.com>
Link: https://lore.kernel.org/r/20221104095658.141222-1-lihuafei1@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/sysfs: Fix double free in error path

commit aa382ffa705bea9931ec92b6f3c70e1fdb372195 upstream.

When pci_create_attr() fails, pci_remove_resource_files() is called which
will iterate over the res_attr[_wc] arrays and frees every non NULL entry.
To avoid a double free here set the array entry only after it's clear we
successfully initialized it.

Fixes: b562ec8f74e4 ("PCI: Don't leak memory if sysfs_create_bin_file() fails")
Link: https://lore.kernel.org/r/20221007070735.GX986@pengutronix.de/
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Fix pci_device_is_present() for VFs by checking PF

commit 98b04dd0b4577894520493d96bc4623387767445 upstream.

pci_device_is_present() previously didn't work for VFs because it reads the
Vendor and Device ID, which are 0xffff for VFs, which looks like they
aren't present.  Check the PF instead.

Wei Gong reported that if virtio I/O is in progress when the driver is
unbound or "0" is written to /sys/.../sriov_numvfs, the virtio I/O
operation hangs, which may result in output like this:

  task:bash state:D stack:    0 pid: 1773 ppid:  1241 flags:0x00004002
  Call Trace:
   schedule+0x4f/0xc0
   blk_mq_freeze_queue_wait+0x69/0xa0
   blk_mq_freeze_queue+0x1b/0x20
   blk_cleanup_queue+0x3d/0xd0
   virtblk_remove+0x3c/0xb0 [virtio_blk]
   virtio_dev_remove+0x4b/0x80
   ...
   device_unregister+0x1b/0x60
   unregister_virtio_device+0x18/0x30
   virtio_pci_remove+0x41/0x80
   pci_device_remove+0x3e/0xb0

This happened because pci_device_is_present(VF) returned "false" in
virtio_pci_remove(), so it called virtio_break_device().  The broken vq
meant that vring_interrupt() skipped the vq.callback() that would have
completed the virtio I/O operation via virtblk_done().

[bhelgaas: commit log, simplify to always use pci_physfn(), add stable tag]
Link: https://lore.kernel.org/r/20221026060912.173250-1-mst@redhat.com
Reported-by: Wei Gong <gongwei833x@gmail.com>
Tested-by: Wei Gong <gongwei833x@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: ccree,hisilicon - Fix dependencies to correct algorithm

commit 2ae6feb1a1f6678fe11864f1b6920ed10b09ad6a upstream.

Commit d2825fa9365d ("crypto: sm3,sm4 - move into crypto directory") moves
the SM3 and SM4 stand-alone library and the algorithm implementation for
the Crypto API into the same directory, and the corresponding relationship
of Kconfig is modified, CONFIG_CRYPTO_SM3/4 corresponds to the stand-alone
library of SM3/4, and CONFIG_CRYPTO_SM3/4_GENERIC corresponds to the
algorithm implementation for the Crypto API. Therefore, it is necessary
for this module to depend on the correct algorithm.

Fixes: d2825fa9365d ("crypto: sm3,sm4 - move into crypto directory")
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

um: virt-pci: Avoid GCC non-NULL warning

commit bdc77507fecd00ddad2f502f86a48a9ec38f0f84 upstream.

GCC gets confused about the return value of get_cpu_var() possibly
being NULL, so explicitly test for it before calls to memcpy() and
memset(). Avoids warnings like this:

   arch/um/drivers/virt-pci.c: In function 'um_pci_send_cmd':
   include/linux/fortify-string.h:48:33: warning: argument 1 null where non-null expected [-Wnonnull]
      48 | #define __underlying_memcpy     __builtin_memcpy
         |                                 ^
   include/linux/fortify-string.h:438:9: note: in expansion of macro '__underlying_memcpy'
     438 |         __underlying_##op(p, q, __fortify_size);                        \
         |         ^~~~~~~~~~~~~
   include/linux/fortify-string.h:483:26: note: in expansion of macro '__fortify_memcpy_chk'
     483 | #define memcpy(p, q, s)  __fortify_memcpy_chk(p, q, s,                  \
         |                          ^~~~~~~~~~~~~~~~~~~~
   arch/um/drivers/virt-pci.c:100:9: note: in expansion of macro 'memcpy'
     100 |         memcpy(buf, cmd, cmd_size);
         |         ^~~~~~

While at it, avoid literal "8" and use stored sizeof(buf->data) in
memset() and um_pci_send_cmd().

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202211271212.SUZSC9f9-lkp@intel.com
Fixes: ba38961a069b ("um: Enable FORTIFY_SOURCE")
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Xiu Jianfeng <xiujianfeng@huawei.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: linux-um@lists.infradead.org
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ima: Fix memory leak in __ima_inode_hash()

commit 8c1d6a050a0f16e0a9d32eaf53b965c77279c6f8 upstream.

Commit f3cc6b25dcc5 ("ima: always measure and audit files in policy") lets
measurement or audit happen even if the file digest cannot be calculated.

As a result, iint->ima_hash could have been allocated despite
ima_collect_measurement() returning an error.

Since ima_hash belongs to a temporary inode metadata structure, declared
at the beginning of __ima_inode_hash(), just add a kfree() call if
ima_collect_measurement() returns an error different from -ENOMEM (in that
case, ima_hash should not have been allocated).

Cc: stable@vger.kernel.org
Fixes: 280fe8367b0d ("ima: Always return a file measurement in ima_file_hash()")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: spi-nor: gigadevice: gd25q256: replace gd25q256_default_init with gd25q256_post_bfpt

commit 4dc49062a7e9c0c7261807fb855df1c611eb78c3 upstream.

When utilizing PARSE_SFDP to initialize the flash parameter, the
deprecated initializing method spi_nor_init_params_deprecated() and the
function spi_nor_manufacturer_init_params() within it will never be
executed, which results in the default_init hook function will also never
be executed.

This is okay for 'D' generation of GD25Q256, because 'D' generation is
implementing the JESD216B standards, it has QER field defined in BFPT,
parsing the SFDP can properly set the quad_enable function. The 'E'
generation also implements the JESD216B standards, and it has the same
status register definitions as 'D' generation, parsing the SFDP to set
the quad_enable function should also work for 'E' generation.

However, the same thing can't apply to 'C' generation. 'C' generation
'GD25Q256C' implements the JESD216 standards, and it doesn't have the
QER field defined in BFPT, since it does have QE bit in status register
1, the quad_enable hook needs to be tweaked to properly set the
quad_enable function, this can be done in post_bfpt fixup hook.

Fixes: 047275f7de18 ("mtd: spi-nor: gigadevice: gd25q256: Init flash based on SFDP")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yaliang Wang <Yaliang.Wang@windriver.com>
[tudor.ambarus@microchip.com: Update comment in gd25q256_post_bfpt]
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221016171901.1483542-2-yaliang.wang@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi: fix use after free in _ipmi_destroy_user()

commit a92ce570c81dc0feaeb12a429b4bc65686d17967 upstream.

The intf_free() function frees the "intf" pointer so we cannot
dereference it again on the next line.

Fixes: cbb79863fc31 ("ipmi: Don't allow device module unload when in use")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Message-Id: <Y3M8xa1drZv4CToE@kili>
Cc: <stable@vger.kernel.org> # 5.5+
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ima: Fix a potential NULL pointer access in ima_restore_measurement_list

commit 11220db412edae8dba58853238f53258268bdb88 upstream.

In restore_template_fmt, when kstrdup fails, a non-NULL value will still be
returned, which causes a NULL pointer access in template_desc_init_fields.

Fixes: c7d09367702e ("ima: support restoring multiple template formats")
Cc: stable@kernel.org
Co-developed-by: Jiaming Li <lijiaming30@huawei.com>
Signed-off-by: Jiaming Li <lijiaming30@huawei.com>
Signed-off-by: Huaxin Lu <luhuaxin1@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: spi-nor: Check for zero erase size in spi_nor_find_best_erase_type()

commit 2ebc336be08160debfe27f87660cf550d710f3e9 upstream.

Erase can be zeroed in spi_nor_parse_4bait() or
spi_nor_init_non_uniform_erase_map(). In practice it happened with
mt25qu256a, which supports 4K, 32K, 64K erases with 3b address commands,
but only 4K and 64K erase with 4b address commands.

Fixes: dc92843159a7 ("mtd: spi-nor: fix erase_type array to indicate current map conf")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211119081412.29732-1-alexander.sverdlin@nokia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi: fix long wait in unload when IPMI disconnect

commit f6f1234d98cce69578bfac79df147a1f6660596c upstream.

When fixing the problem mentioned in PATCH1, we also found
the following problem:

If the IPMI is disconnected and in the sending process, the
uninstallation driver will be stuck for a long time.

The main problem is that uninstalling the driver waits for curr_msg to
be sent or HOSED. After stopping tasklet, the only place to trigger the
timeout mechanism is the circular poll in shutdown_smi.

The poll function delays 10us and calls smi_event_handler(smi_info,10).
Smi_event_handler deducts 10us from kcs->ibf_timeout.

But the poll func is followed by schedule_timeout_uninterruptible(1).
The time consumed here is not counted in kcs->ibf_timeout.

So when 10us is deducted from kcs->ibf_timeout, at least 1 jiffies has
actually passed. The waiting time has increased by more than a
hundredfold.

Now instead of calling poll(). call smi_event_handler() directly and
calculate the elapsed time.

For verification, you can directly use ebpf to check the kcs->
ibf_timeout for each call to kcs_event() when IPMI is disconnected.
Decrement at normal rate before unloading. The decrement rate becomes
very slow after unloading.

$ bpftrace -e 'kprobe:kcs_event {printf("kcs->ibftimeout : %d\n",
*(arg0+584));}'

Signed-off-by: Zhang Yuchen <zhangyuchen.lcr@bytedance.com>
Message-Id: <20221007092617.87597-3-zhangyuchen.lcr@bytedance.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipu3-imgu: Fix NULL pointer dereference in imgu_subdev_set_selection()

commit dc608edf7d45ba0c2ad14c06eccd66474fec7847 upstream.

Calling v4l2_subdev_get_try_crop() and v4l2_subdev_get_try_compose()
with a subdev state of NULL leads to a NULL pointer dereference. This
can currently happen in imgu_subdev_set_selection() when the state
passed in is NULL, as this method first gets pointers to both the "try"
and "active" states and only then decides which to use.

The same issue has been addressed for imgu_subdev_get_selection() with
commit 30d03a0de650 ("ipu3-imgu: Fix NULL pointer dereference in active
selection access"). However the issue still persists in
imgu_subdev_set_selection().

Therefore, apply a similar fix as done in the aforementioned commit to
imgu_subdev_set_selection(). To keep things a bit cleaner, introduce
helper functions for "crop" and "compose" access and use them in both
imgu_subdev_set_selection() and imgu_subdev_get_selection().

Fixes: 0d346d2a6f54 ("media: v4l2-subdev: add subdev-wide state struct")
Cc: stable@vger.kernel.org # for v5.14 and later
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: jz4740-i2s: Handle independent FIFO flush bits

commit 8b3a9ad86239f80ed569e23c3954a311f66481d6 upstream.

On the JZ4740, there is a single bit that flushes (empties) both
the transmit and receive FIFO. Later SoCs have independent flush
bits for each FIFO.

Independent FIFOs can be flushed before the snd_soc_dai_active()
check because it won't disturb other active streams. This ensures
that the FIFO we're about to use is always flushed before starting
up. With shared FIFOs we can't do that because if another substream
is active, flushing its FIFO would cause underrun errors.

This also fixes a bug: since we were only setting the JZ4740's
flush bit, which corresponds to the TX FIFO flush bit on other
SoCs, other SoCs were not having their RX FIFO flushed at all.

Fixes: 967beb2e8777 ("ASoC: jz4740: Add jz4780 support")
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Cc: stable@vger.kernel.org
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20221023143328.160866-2-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: wilc1000: sdio: fix module autoloading

commit 57d545b5a3d6ce3a8fb6b093f02bfcbb908973f3 upstream.

There are no SDIO module aliases included in the driver, therefore,
module autoloading isn't working. Add the proper MODULE_DEVICE_TABLE().

Cc: stable@vger.kernel.org
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221027171221.491937-1-michael@walle.cc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi: Add iMac Pro 2017 to uefi skip cert quirk

commit 0be56a116220f9e5731a6609e66a11accfe8d8e2 upstream.

The iMac Pro 2017 is also a T2 Mac. Thus add it to the list of uefi skip
cert.

Cc: stable@vger.kernel.org
Fixes: 155ca952c7ca ("efi: Do not import certificates from UEFI Secure Boot for T2 Macs")
Link: https://lore.kernel.org/linux-integrity/9D46D92F-1381-4F10-989C-1A12CD2FFDD8@live.com/
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md/bitmap: Fix bitmap chunk size overflow issues

commit 4555211190798b6b6fa2c37667d175bf67945c78 upstream.

- limit bitmap chunk size internal u64 variable to values not overflowing
the u32 bitmap superblock structure variable stored on persistent media
- assign bitmap chunk size internal u64 variable from unsigned values to
avoid possible sign extension artifacts when assigning from a s32 value

The bug has been there since at least kernel 4.0.
Steps to reproduce it:
1: mdadm -C /dev/mdx -l 1 --bitmap=internal --bitmap-chunk=256M -e 1.2
-n2 /dev/rnbd1 /dev/rnbd2
2 resize member device rnbd1 and rnbd2 to 8 TB
3 mdadm --grow /dev/mdx --size=max

The bitmap_chunksize will overflow without patch.

Cc: stable@vger.kernel.org
Signed-off-by: Florian-Ewald Mueller <florian-ewald.mueller@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: mq-deadline: Do not break sequential write streams to zoned HDDs

commit 015d02f48537cf2d1a65eeac50717566f9db6eec upstream.

mq-deadline ensures an in order dispatching of write requests to zoned
block devices using a per zone lock (a bit). This implies that for any
purely sequential write workload, the drive is exercised most of the
time at a maximum queue depth of one.

However, when such sequential write workload crosses a zone boundary
(when sequentially writing multiple contiguous zones), zone write
locking may prevent the last write to one zone to be issued (as the
previous write is still being executed) but allow the first write to the
following zone to be issued (as that zone is not yet being writen and
not locked). This result in an out of order delivery of the sequential
write commands to the device every time a zone boundary is crossed.

While such behavior does not break the sequential write constraint of
zoned block devices (and does not generate any write error), some zoned
hard-disks react badly to seeing these out of order writes, resulting in
lower write throughput.

This problem can be addressed by always dispatching the first request
of a stream of sequential write requests, regardless of the zones
targeted by these sequential writes. To do so, the function
deadline_skip_seq_writes() is introduced and used in
deadline_next_request() to select the next write command to issue if the
target device is an HDD (blk_queue_nonrot() being false).
deadline_fifo_request() is modified using the new
deadline_earlier_request() and deadline_is_seq_write() helpers to ignore
requests in the fifo list that have a preceding request in lba order
that is sequential.

With this fix, a sequential write workload executed with the following
fio command:

fio  --name=seq-write --filename=/dev/sda --zonemode=zbd --direct=1 \
     --size=68719476736  --ioengine=libaio --iodepth=32 --rw=write \
     --bs=65536

results in an increase from 225 MB/s to 250 MB/s of the write throughput
of an SMR HDD (11% increase).

Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20221124021208.242541-3-damien.lemoal@opensource.wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: mq-deadline: Fix dd_finish_request() for zoned devices

commit 2820e5d0820ac4daedff1272616a53d9c7682fd2 upstream.

dd_finish_request() tests if the per prio fifo_list is not empty to
determine if request dispatching must be restarted for handling blocked
write requests to zoned devices with a call to
blk_mq_sched_mark_restart_hctx(). While simple, this implementation has
2 problems:

1) Only the priority level of the completed request is considered.
   However, writes to a zone may be blocked due to other writes to the
   same zone using a different priority level. While this is unlikely to
   happen in practice, as writing a zone with different IO priorirites
   does not make sense, nothing in the code prevents this from
   happening.
2) The use of list_empty() is dangerous as dd_finish_request() does not
   take dd->lock and may run concurrently with the insert and dispatch
   code.

Fix these 2 problems by testing the write fifo list of all priority
levels using the new helper dd_has_write_work(), and by testing each
fifo list using list_empty_careful().

Fixes: c807ab520fc3 ("block/mq-deadline: Add I/O priority support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20221124021208.242541-2-damien.lemoal@opensource.wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: fix mmhub register base coding error

commit 347fafe0eb46df941965c355c77ce480e4d49f1f upstream.

fix MMHUB register base coding error.

Fixes: ec6837591f992 ("drm/amdgpu/gmc10: program the smallK fragment size")

Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: ds1347: fix value written to century register

commit 4dfe05bdc1ade79b943d4979a2e2a8b5ef68fbb5 upstream.

In `ds1347_set_time()`, the wrong value is being written to the
`DS1347_CENTURY_REG` register. It needs to be converted to BCD. Fix
it.

Fixes: 147dae76dbb9 ("rtc: ds1347: handle century register")
Cc: <stable@vger.kernel.org> # v5.5+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20221027163249.447416-1-abbotti@mev.co.uk
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ravb: Fix "failed to switch device to config mode" message during unbind

commit c72a7e42592b2e18d862cf120876070947000d7a upstream.

This patch fixes the error "ravb 11c20000.ethernet eth0: failed to switch
device to config mode" during unbind.

We are doing register access after pm_runtime_put_sync().

We usually do cleanup in reverse order of init. Currently in
remove(), the "pm_runtime_put_sync" is not in reverse order.

Probe
reset_control_deassert(rstc);
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);

remove
pm_runtime_put_sync(&pdev->dev);
unregister_netdev(ndev);
..
ravb_mdio_release(priv);
pm_runtime_disable(&pdev->dev);

Consider the call to unregister_netdev()
unregister_netdev->unregister_netdevice_queue->rollback_registered_many
that calls the below functions which access the registers after
pm_runtime_put_sync()
1) ravb_get_stats
2) ravb_close

Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Cc: stable@vger.kernel.org
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221214105118.2495313-1-biju.das.jz@bp.renesas.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: set correct status of tcon ipc when reconnecting

commit 25cf01b7c9200d6ace5a59125d8166435dd9dea7 upstream.

The status of tcon ipcs were not being set to TID_NEED_RECO when
marking sessions and tcons to be reconnected, therefore not sending
tree connect to those ipcs in cifs_tree_connect() and leaving them
disconnected.

Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: set correct ipc status after initial tree connect

commit 86fe0fa8747fb1bc4cc44fc1966e0959fe752f38 upstream.

cifs_tcon::status wasn't correctly updated to TID_GOOD after
establishing initial IPC connection thus staying at TID_NEW as long as
it wasn't reconnected.

Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: set correct tcon status after initial tree connect

commit b248586a49a7729f73c504b1e7b958caea45e927 upstream.

cifs_tcon::status wasn't correctly updated to TID_GOOD after initial
tree connect thus staying at TID_NEW as long as it was connected.

Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: fix missing display of three mount options

commit 2bfd81043e944af0e52835ef6d9b41795af22341 upstream.

Three mount options: "tcpnodelay" and "noautotune" and "noblocksend"
were not displayed when passed in on cifs/smb3 mounts (e.g. displayed
in /proc/mounts e.g.). No change to defaults so these are not
displayed if not specified on mount.

Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: fix confusing debug message

commit a85ceafd41927e41a4103d228a993df7edd8823b upstream.

Since rc was initialised to -ENOMEM in cifs_get_smb_ses(), when an
existing smb session was found, free_xid() would be called and then
print

  CIFS: fs/cifs/connect.c: Existing tcp session with server found
  CIFS: fs/cifs/connect.c: VFS: in cifs_get_smb_ses as Xid: 44 with uid: 0
  CIFS: fs/cifs/connect.c: Existing smb sess found (status=1)
  CIFS: fs/cifs/connect.c: VFS: leaving cifs_get_smb_ses (xid = 44) rc = -12

Fix this by initialising rc to 0 and then let free_xid() print this
instead

  CIFS: fs/cifs/connect.c: Existing tcp session with server found
  CIFS: fs/cifs/connect.c: VFS: in cifs_get_smb_ses as Xid: 14 with uid: 0
  CIFS: fs/cifs/connect.c: Existing smb sess found (status=1)
  CIFS: fs/cifs/connect.c: VFS: leaving cifs_get_smb_ses (xid = 14) rc = 0

Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: dvb-core: Fix UAF due to refcount races at releasing

commit fd3d91ab1c6ab0628fe642dd570b56302c30a792 upstream.

The dvb-core tries to sync the releases of opened files at
dvb_dmxdev_release() with two refcounts: dvbdev->users and
dvr_dvbdev->users.  A problem is present in those two syncs: when yet
another dvb_demux_open() is called during those sync waits,
dvb_demux_open() continues to process even if the device is being
closed.  This includes the increment of the former refcount, resulting
in the leftover refcount after the sync of the latter refcount at
dvb_dmxdev_release().  It ends up with use-after-free, since the
function believes that all usages were gone and releases the
resources.

This patch addresses the problem by adding the check of dmxdev->exit
flag at dvb_demux_open(), just like dvb_dvr_open() already does.  With
the exit flag check, the second call of dvb_demux_open() fails, hence
the further corruption can be avoided.

Also for avoiding the races of the dmxdev->exit flag reference, this
patch serializes the dmxdev->exit set up and the sync waits with the
dmxdev->mutex lock at dvb_dmxdev_release().  Without the mutex lock,
dvb_demux_open() (or dvb_dvr_open()) may run concurrently with
dvb_dmxdev_release(), which allows to skip the exit flag check and
continue the open process that is being closed.

CVE-2022-41218 is assigned to those bugs above.

Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/20220908132754.30532-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: dvb-core: Fix double free in dvb_register_device()

commit 6b0d0477fce747d4137aa65856318b55fba72198 upstream.

In function dvb_register_device() -> dvb_register_media_device() ->
dvb_create_media_entity(), dvb->entity is allocated and initialized. If
the initialization fails, it frees the dvb->entity, and return an error
code. The caller takes the error code and handles the error by calling
dvb_media_device_free(), which unregisters the entity and frees the
field again if it is not NULL. As dvb->entity may not NULLed in
dvb_create_media_entity() when the allocation of dvbdev->pad fails, a
double free may occur. This may also cause an Use After free in
media_device_unregister_entity().

Fix this by storing NULL to dvb->entity when it is freed.

Link: https://lore.kernel.org/linux-media/20220426052921.2088416-1-keitasuzuki.park@sslab.ics.keio.ac.jp
Fixes: fcd5ce4b3936 ("media: dvb-core: fix a memory leak bug")
Cc: stable@vger.kernel.org
Cc: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 9256/1: NWFPE: avoid compiler-generated __aeabi_uldivmod

commit 3220022038b9a3845eea762af85f1c5694b9f861 upstream.

clang-15's ability to elide loops completely became more aggressive when
it can deduce how a variable is being updated in a loop. Counting down
one variable by an increment of another can be replaced by a modulo
operation.

For 64b variables on 32b ARM EABI targets, this can result in the
compiler generating calls to __aeabi_uldivmod, which it does for a do
while loop in float64_rem().

For the kernel, we'd generally prefer that developers not open code 64b
division via binary / operators and instead use the more explicit
helpers from div64.h. On arm-linux-gnuabi targets, failure to do so can
result in linkage failures due to undefined references to
__aeabi_uldivmod().

While developers can avoid open coding divisions on 64b variables, the
compiler doesn't know that the Linux kernel has a partial implementation
of a compiler runtime (--rtlib) to enforce this convention.

It's also undecidable for the compiler whether the code in question
would be faster to execute the loop vs elide it and do the 64b division.

While I actively avoid using the internal -mllvm command line flags, I
think we get better code than using barrier() here, which will force
reloads+spills in the loop for all toolchains.

Link: https://github.com/ClangBuiltLinux/linux/issues/1666
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: mediatek: mt8195-demo: fix the memory size of node secmon

commit e4a4175201014c0222f6bab1895a17b3d1b92f08 upstream.

The size of device tree node secmon (bl31_secmon_reserved) was
incorrect. It should be increased to 2MiB (0x200000).

The origin setting will cause some abnormal behavior due to
trusted-firmware-a and related firmware didn't load correctly.
The incorrect behavior may vary because of different software stacks.
For example, it will cause build error in some Yocto project because
it will check if there was enough memory to load trusted-firmware-a
to the reserved memory.

When mt8195-demo.dts sent to the upstream, at that time the size of
BL31 was small. Because supported functions and modules in BL31 are
basic sets when the board was under early development stage.

Now BL31 includes more firmwares of coprocessors and maturer functions
so the size has grown bigger in real applications. According to the value
reported by customers, we think reserved 2MiB for BL31 might be enough
for maybe the following 2 or 3 years.

Cc: stable@vger.kernel.org # v5.19
Fixes: 6147314aeedc ("arm64: dts: mediatek: Add device-tree for MT8195 Demo board")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221111095540.28881-1-macpaul.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: tegra-video: fix device_node use after free

commit c4d344163c3a7f90712525f931a6c016bbb35e18 upstream.

At probe time this code path is followed:

* tegra_csi_init
   * tegra_csi_channels_alloc
     * for_each_child_of_node(node, channel) -- iterates over channels
       * automatically gets 'channel'
         * tegra_csi_channel_alloc()
           * saves into chan->of_node a pointer to the channel OF node
       * automatically gets and puts 'channel'
       * now the node saved in chan->of_node has refcount 0, can disappear
   * tegra_csi_channels_init
     * iterates over channels
       * tegra_csi_channel_init -- uses chan->of_node

After that, chan->of_node keeps storing the node until the device is
removed.

of_node_get() the node and of_node_put() it during teardown to avoid any
risk.

Fixes: 1ebaeb09830f ("media: tegra-video: Add support for external sensor capture")
Cc: stable@vger.kernel.org
Cc: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: tegra-video: fix chan->mipi value on error

commit 10b5ce6743c839fa75336042c64e2479caec9430 upstream.

chan->mipi takes the return value of tegra_mipi_request() which can be a
valid pointer or an error. However chan->mipi is checked in several places,
including error-cleanup code in tegra_csi_channels_cleanup(), as 'if
(chan->mipi)', which suggests the initial intent was that chan->mipi should
be either NULL or a valid pointer, never an error. As a consequence,
cleanup code in case of tegra_mipi_request() errors would dereference an
invalid pointer.

Fix by ensuring chan->mipi always contains either NULL or a void pointer.

Also add that to the documentation.

Fixes: 523c857e34ce ("media: tegra-video: Add CSI MIPI pads calibration")
Cc: stable@vger.kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix infinite loop in tracing_read_pipe on overflowed print_trace_line

commit c1ac03af6ed45d05786c219d102f37eb44880f28 upstream.

print_trace_line may overflow seq_file buffer. If the event is not
consumed, the while loop keeps peeking this event, causing a infinite loop.

Link: https://lkml.kernel.org/r/20221129113009.182425-1-yangjihong1@huawei.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 088b1e427dbba ("ftrace: pipe fixes")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix issue of missing one synthetic field

commit ff4837f7fe59ff018eca4705a70eca5e0b486b97 upstream.

The maximum number of synthetic fields supported is defined as
SYNTH_FIELDS_MAX which value currently is 64, but it actually fails
when try to generate a synthetic event with 64 fields by executing like:

  # echo "my_synth_event int v1; int v2; int v3; int v4; int v5; int v6;\
   int v7; int v8; int v9; int v10; int v11; int v12; int v13; int v14;\
   int v15; int v16; int v17; int v18; int v19; int v20; int v21; int v22;\
   int v23; int v24; int v25; int v26; int v27; int v28; int v29; int v30;\
   int v31; int v32; int v33; int v34; int v35; int v36; int v37; int v38;\
   int v39; int v40; int v41; int v42; int v43; int v44; int v45; int v46;\
   int v47; int v48; int v49; int v50; int v51; int v52; int v53; int v54;\
   int v55; int v56; int v57; int v58; int v59; int v60; int v61; int v62;\
   int v63; int v64" >> /sys/kernel/tracing/synthetic_events

Correct the field counting to fix it.

Link: https://lore.kernel.org/linux-trace-kernel/20221207091557.3137904-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <zanussi@kernel.org>
Cc: stable@vger.kernel.org
Fixes: c9e759b1e845 ("tracing: Rework synthetic event command parsing")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/probes: Handle system names with hyphens

commit 575b76cb885532aae13a9d979fd476bb2b156cb9 upstream.

When creating probe names, a check is done to make sure it matches basic C
standard variable naming standards. Basically, starts with alphabetic or
underline, and then the rest of the characters have alpha-numeric or
underline in them.

But system names do not have any true naming conventions, as they are
created by the TRACE_SYSTEM macro and nothing tests to see what they are.
The "xhci-hcd" trace events has a '-' in the system name. When trying to
attach a eprobe to one of these trace points, it fails because the system
name does not follow the variable naming convention because of the
hyphen, and the eprobe checks fail on this.

Allow hyphens in the system name so that eprobes can attach to the
"xhci-hcd" trace events.

Link: https://lore.kernel.org/all/Y3eJ8GiGnEvVd8%2FN@macondo/
Link: https://lore.kernel.org/linux-trace-kernel/20221122122345.160f5077@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 5b7a96220900e ("tracing/probe: Check event/group naming rule at parsing")
Reported-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/hist: Fix wrong return value in parse_action_params()

commit 2cc6a528882d0e0ccbc1bca5f95b8c963cedac54 upstream.

When number of synth fields is more than SYNTH_FIELDS_MAX,
parse_action_params() should return -EINVAL.

Link: https://lore.kernel.org/linux-trace-kernel/20221207034635.2253990-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <zanussi@kernel.org>
Cc: stable@vger.kernel.org
Fixes: c282a386a397 ("tracing: Add 'onmatch' hist trigger action support")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix complicated dependency of CONFIG_TRACER_MAX_TRACE

commit e25e43a4e5d8cb2323553d8b6a7ba08d2ebab21f upstream.

Both CONFIG_OSNOISE_TRACER and CONFIG_HWLAT_TRACER partially enables the
CONFIG_TRACER_MAX_TRACE code, but that is complicated and has
introduced a bug; It declares tracing_max_lat_fops data structure outside
of #ifdefs, but since it is defined only when CONFIG_TRACER_MAX_TRACE=y
or CONFIG_HWLAT_TRACER=y, if only CONFIG_OSNOISE_TRACER=y, that
declaration comes to a definition(!).

To fix this issue, and do not repeat the similar problem, makes
CONFIG_OSNOISE_TRACER and CONFIG_HWLAT_TRACER enables the
CONFIG_TRACER_MAX_TRACE always. It has there benefits;
- Fix the tracing_max_lat_fops bug
- Simplify the #ifdefs
- CONFIG_TRACER_MAX_TRACE code is fully enabled, or not.

Link: https://lore.kernel.org/linux-trace-kernel/167033628155.4111793.12185405690820208159.stgit@devnote3
Fixes: 424b650f35c7 ("tracing: Fix missing osnoise tracer on max_latency")
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: stable@vger.kernel.org
Reported-by: David Howells <dhowells@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/all/166992525941.1716618.13740663757583361463.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/all/202212052253.VuhZ2ulJ-lkp@intel.com/T/#u
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/ftrace: fix syscall tracing on PPC64_ELF_ABI_V1

commit ad050d2390fccb22aa3e6f65e11757ce7a5a7ca5 upstream.

In v5.7 the powerpc syscall entry/exit logic was rewritten in C, on
PPC64_ELF_ABI_V1 this resulted in the symbols in the syscall table
changing from their dot prefixed variant to the non-prefixed ones.

Since ftrace prefixes a dot to the syscall names when matching them to
build its syscall event list, this resulted in no syscall events being
available.

Remove the PPC64_ELF_ABI_V1 specific version of
arch_syscall_match_sym_name to have the same behavior across all powerpc
variants.

Fixes: 68b34588e202 ("powerpc/64/sycall: Implement syscall entry/exit logic in C")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221201161442.2127231-1-mjeanson@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix race where eprobes can be called before the event

commit d5f30a7da8ea8e6450250275cec5670cee3c4264 upstream.

The flag that tells the event to call its triggers after reading the event
is set for eprobes after the eprobe is enabled. This leads to a race where
the eprobe may be triggered at the beginning of the event where the record
information is NULL. The eprobe then dereferences the NULL record causing
a NULL kernel pointer bug.

Test for a NULL record to keep this from happening.

Link: https://lore.kernel.org/linux-trace-kernel/20221116192552.1066630-1-rafaelmendsr@gmail.com/
Link: https://lore.kernel.org/all/20221117214249.2addbe10@gandalf.local.home/
Cc: stable@vger.kernel.org
Fixes: 7491e2c442781 ("tracing: Add a probe that attaches to trace events")
Reported-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/kprobes: Fix optprobe optimization check with CONFIG_RETHUNK

commit 63dc6325ff41ee9e570bde705ac34a39c5dbeb44 upstream.

Since the CONFIG_RETHUNK and CONFIG_SLS will use INT3 for stopping
speculative execution after function return, kprobe jump optimization
always fails on the functions with such INT3 inside the function body.
(It already checks the INT3 padding between functions, but not inside
the function)

To avoid this issue, as same as kprobes, check whether the INT3 comes
from kgdb or not, and if so, stop decoding and make it fail. The other
INT3 will come from CONFIG_RETHUNK/CONFIG_SLS and those can be
treated as a one-byte instruction.

Fixes: e463a09af2f0 ("x86: Add straight-line-speculation mitigation")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/167146051929.1374301.7419382929328081706.stgit@devnote3
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK

commit 1993bf97992df2d560287f3c4120eda57426843d upstream.

Since the CONFIG_RETHUNK and CONFIG_SLS will use INT3 for stopping
speculative execution after RET instruction, kprobes always failes to
check the probed instruction boundary by decoding the function body if
the probed address is after such sequence. (Note that some conditional
code blocks will be placed after function return, if compiler decides
it is not on the hot path.)

This is because kprobes expects kgdb puts the INT3 as a software
breakpoint and it will replace the original instruction.
But these INT3 are not such purpose, it doesn't need to recover the
original instruction.

To avoid this issue, kprobes checks whether the INT3 is owned by
kgdb or not, and if so, stop decoding and make it fail. The other
INT3 will come from CONFIG_RETHUNK/CONFIG_SLS and those can be
treated as a one-byte instruction.

Fixes: e463a09af2f0 ("x86: Add straight-line-speculation mitigation")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/167146051026.1374301.392728975473572291.stgit@devnote3
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ftrace/x86: Add back ftrace_expected for ftrace bug reports

commit fd3dc56253acbe9c641a66d312d8393cd55eb04c upstream.

After someone reported a bug report with a failed modification due to the
expected value not matching what was found, it came to my attention that
the ftrace_expected is no longer set when that happens. This makes for
debugging the issue a bit more difficult.

Set ftrace_expected to the expected code before calling ftrace_bug, so
that it shows what was expected and why it failed.

Link: https://lore.kernel.org/all/CA+wXwBQ-VhK+hpBtYtyZP-NiX4g8fqRRWithFOHQW-0coQ3vLg@mail.gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20221209105247.01d4e51d@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 768ae4406a5c ("x86/ftrace: Use text_poke()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/microcode/intel: Do not retry microcode reloading on the APs

commit be1b670f61443aa5d0d01782e9b8ea0ee825d018 upstream.

The retries in load_ucode_intel_ap() were in place to support systems
with mixed steppings. Mixed steppings are no longer supported and there is
only one microcode image at a time. Any retries will simply reattempt to
apply the same image over and over without making progress.

[ bp: Zap the circumstantial reasoning from the commit message. ]

Fixes: 06b8534cb728 ("x86/microcode: Rework microcode loading")
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221129210832.107850-3-ashok.raj@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: Properly expose ENABLE_USR_WAIT_PAUSE control to L1

commit 31de69f4eea77b28a9724b3fa55aae104fc91fc7 upstream.

Set ENABLE_USR_WAIT_PAUSE in KVM's supported VMX MSR configuration if the
feature is supported in hardware and enabled in KVM's base, non-nested
configuration, i.e. expose ENABLE_USR_WAIT_PAUSE to L1 if it's supported.
This fixes a bug where saving/restoring, i.e. migrating, a vCPU will fail
if WAITPKG (the associated CPUID feature) is enabled for the vCPU, and
obviously allows L1 to enable the feature for L2.

KVM already effectively exposes ENABLE_USR_WAIT_PAUSE to L1 by stuffing
the allowed-1 control ina vCPU's virtual MSR_IA32_VMX_PROCBASED_CTLS2 when
updating secondary controls in response to KVM_SET_CPUID(2), but (a) that
depends on flawed code (KVM shouldn't touch VMX MSRs in response to CPUID
updates) and (b) runs afoul of vmx_restore_control_msr()'s restriction
that the guest value must be a strict subset of the supported host value.

Although no past commit explicitly enabled nested support for WAITPKG,
doing so is safe and functionally correct from an architectural
perspective as no additional KVM support is needed to virtualize TPAUSE,
UMONITOR, and UMWAIT for L2 relative to L1, and KVM already forwards
VM-Exits to L1 as necessary (commit bf653b78f960, "KVM: vmx: Introduce
handle_unexpected_vmexit and handle WAITPKG vmexit").

Note, KVM always keeps the hosts MSR_IA32_UMWAIT_CONTROL resident in
hardware, i.e. always runs both L1 and L2 with the host's power management
settings for TPAUSE and UMWAIT. See commit bf09fb6cba4f ("KVM: VMX: Stop
context switching MSR_IA32_UMWAIT_CONTROL") for more details.

Fixes: e69e72faa3a0 ("KVM: x86: Add support for user wait instructions")
Cc: stable@vger.kernel.org
Reported-by: Aaron Lewis <aaronlewis@google.com>
Reported-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20221213062306.667649-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: fix APICv/x2AVIC disabled when vm reboot by itself

commit ef40757743b47cc95de9b4ed41525c94f8dc73d9 upstream.

When a VM reboots itself, the reset process will result in
an ioctl(KVM_SET_LAPIC, ...) to disable x2APIC mode and set
the xAPIC id of the vCPU to its default value, which is the
vCPU id.

That will be handled in KVM as follows:

     kvm_vcpu_ioctl_set_lapic
       kvm_apic_set_state
  kvm_lapic_set_base  =>  disable X2APIC mode
    kvm_apic_state_fixup
      kvm_lapic_xapic_id_updated
        kvm_xapic_id(apic) != apic->vcpu->vcpu_id
kvm_set_apicv_inhibit(APICV_INHIBIT_REASON_APIC_ID_MODIFIED)
   memcpy(vcpu->arch.apic->regs, s->regs, sizeof(*s))  => update APIC_ID

When kvm_apic_set_state invokes kvm_lapic_set_base to disable
x2APIC mode, the old 32-bit x2APIC id is still present rather
than the 8-bit xAPIC id.  kvm_lapic_xapic_id_updated will set the
APICV_INHIBIT_REASON_APIC_ID_MODIFIED bit and disable APICv/x2AVIC.

Instead, kvm_lapic_xapic_id_updated must be called after APIC_ID is
changed.

In fact, this fixes another small issue in the code in that
potential changes to a vCPU's xAPIC ID need not be tracked for
KVM_GET_LAPIC.

Fixes: 3743c2f02517 ("KVM: x86: inhibit APICv/AVIC on changes to APIC ID or APIC base")
Signed-off-by: Yuan ZhaoXiong <yuanzhaoxiong@baidu.com>
Message-Id: <1669984574-32692-1-git-send-email-yuanzhaoxiong@baidu.com>
Cc: stable@vger.kernel.org
Reported-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: Inject #GP, not #UD, if "generic" VMXON CR0/CR4 check fails

commit 9cc409325ddd776f6fd6293d5ce93ce1248af6e4 upstream.

Inject #GP for if VMXON is attempting with a CR0/CR4 that fails the
generic "is CRx valid" check, but passes the CR4.VMXE check, and do the
generic checks _after_ handling the post-VMXON VM-Fail.

The CR4.VMXE check, and all other #UD cases, are special pre-conditions
that are enforced prior to pivoting on the current VMX mode, i.e. occur
before interception if VMXON is attempted in VMX non-root mode.

All other CR0/CR4 checks generate #GP and effectively have lower priority
than the post-VMXON check.

Per the SDM:

    IF (register operand) or (CR0.PE = 0) or (CR4.VMXE = 0) or ...
        THEN #UD;
    ELSIF not in VMX operation
        THEN
            IF (CPL > 0) or (in A20M mode) or
            (the values of CR0 and CR4 are not supported in VMX operation)
                THEN #GP(0);
    ELSIF in VMX non-root operation
        THEN VMexit;
    ELSIF CPL > 0
        THEN #GP(0);
    ELSE VMfail("VMXON executed in VMX root operation");
    FI;

which, if re-written without ELSIF, yields:

    IF (register operand) or (CR0.PE = 0) or (CR4.VMXE = 0) or ...
        THEN #UD

    IF in VMX non-root operation
        THEN VMexit;

    IF CPL > 0
        THEN #GP(0)

    IF in VMX operation
        THEN VMfail("VMXON executed in VMX root operation");

    IF (in A20M mode) or
       (the values of CR0 and CR4 are not supported in VMX operation)
                THEN #GP(0);

Note, KVM unconditionally forwards VMXON VM-Exits that occur in L2 to L1,
i.e. there is no need to check the vCPU is not in VMX non-root mode.  Add
a comment to explain why unconditionally forwarding such exits is
functionally correct.

Reported-by: Eric Li <ercli@ucdavis.edu>
Fixes: c7d855c2aff2 ("KVM: nVMX: Inject #UD if VMXON is attempted with incompatible CR0/CR4")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006001956.329314-1-seanjc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: Resume guest immediately when injecting #GP on ECREATE

commit eb3992e833d3a17f9b0a3e0371d0b1d3d566f740 upstream.

Resume the guest immediately when injecting a #GP on ECREATE due to an
invalid enclave size, i.e. don't attempt ECREATE in the host. The #GP is
a terminal fault, e.g. skipping the instruction if ECREATE is successful
would result in KVM injecting #GP on the instruction following ECREATE.

Fixes: 70210c044b4e ("KVM: VMX: Add SGX ENCLS[ECREATE] handler to enforce CPUID restrictions")
Cc: stable@vger.kernel.org
Cc: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20220930233132.1723330-1-seanjc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ima: Fix hash dependency to correct algorithm

commit b6018af440a07bd0d74b58c4e18045f4a8dbfe6b upstream.

Commit d2825fa9365d ("crypto: sm3,sm4 - move into crypto directory") moves
the SM3 and SM4 stand-alone library and the algorithm implementation for
the Crypto API into the same directory, and the corresponding relationship
of Kconfig is modified, CONFIG_CRYPTO_SM3/4 corresponds to the stand-alone
library of SM3/4, and CONFIG_CRYPTO_SM3/4_GENERIC corresponds to the
algorithm implementation for the Crypto API. Therefore, it is necessary
for this module to depend on the correct algorithm.

Fixes: d2825fa9365d ("crypto: sm3,sm4 - move into crypto directory")
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of/kexec: Fix reading 32-bit "linux,initrd-{start,end}" values

commit e553ad8d7957697385e81034bf76db3b2cb2cf27 upstream.

"linux,initrd-start" and "linux,initrd-end" can be 32-bit values even on
a 64-bit platform. Ideally, the size should be based on
'#address-cells', but that has never been enforced in the kernel's FDT
boot parsing code (early_init_dt_check_for_initrd()). Bootloader
behavior is known to vary. For example, kexec always writes these as
64-bit. The result of incorrectly reading 32-bit values is most likely
the reserved memory for the original initrd will still be reserved
for the new kernel. The original arm64 equivalent of this code failed to
release the initrd reserved memory in *all* cases.

Use of_read_number() to mirror the early_init_dt_check_for_initrd()
code.

Fixes: b30be4dc733e ("of: Add a common kexec FDT setup function")
Cc: stable@vger.kernel.org
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Link: https://lore.kernel.org/r/20221128202440.1411895-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xtensa: add __umulsidi3 helper

commit 8939c58d68f97ce530f02d46c9f2b56c3ec88399 upstream.

xtensa gcc-13 has changed multiplication handling and may now use
__umulsidi3 helper where it used to use __muldi3. As a result building
the kernel with the new gcc may fail with the following error:

linux/init/main.c:1287: undefined reference to `__umulsidi3'

Fix the build by providing __umulsidi3 implementation for xtensa.

Cc: stable@vger.kernel.org # 5.18+
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/core: Call LSM hook after copying perf_event_attr

commit 0a041ebca4956292cadfb14a63ace3a9c1dcb0a3 upstream.

It passes the attr struct to the security_perf_event_open() but it's
not initialized yet.

Fixes: da97e18458fb ("perf_event: Add support for LSM and SELinux checks")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20221220223140.4020470-1-namhyung@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/hist: Fix out-of-bound write on 'action_data.var_ref_idx'

commit 82470f7d9044842618c847a7166de2b7458157a7 upstream.

When generate a synthetic event with many params and then create a trace
action for it [1], kernel panic happened [2].

It is because that in trace_action_create() 'data->n_params' is up to
SYNTH_FIELDS_MAX (current value is 64), and array 'data->var_ref_idx'
keeps indices into array 'hist_data->var_refs' for each synthetic event
param, but the length of 'data->var_ref_idx' is TRACING_MAP_VARS_MAX
(current value is 16), so out-of-bound write happened when 'data->n_params'
more than 16. In this case, 'data->match_data.event' is overwritten and
eventually cause the panic.

To solve the issue, adjust the length of 'data->var_ref_idx' to be
SYNTH_FIELDS_MAX and add sanity checks to avoid out-of-bound write.

[1]
# cd /sys/kernel/tracing/
# echo "my_synth_event int v1; int v2; int v3; int v4; int v5; int v6;\
int v7; int v8; int v9; int v10; int v11; int v12; int v13; int v14;\
int v15; int v16; int v17; int v18; int v19; int v20; int v21; int v22;\
int v23; int v24; int v25; int v26; int v27; int v28; int v29; int v30;\
int v31; int v32; int v33; int v34; int v35; int v36; int v37; int v38;\
int v39; int v40; int v41; int v42; int v43; int v44; int v45; int v46;\
int v47; int v48; int v49; int v50; int v51; int v52; int v53; int v54;\
int v55; int v56; int v57; int v58; int v59; int v60; int v61; int v62;\
int v63" >> synthetic_events
# echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="bash"' >> \
events/sched/sched_waking/trigger
# echo "hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(\
pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\
pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\
pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\
pid,pid,pid,pid,pid,pid,pid,pid,pid)" >> events/sched/sched_switch/trigger

[2]
BUG: unable to handle page fault for address: ffff91c900000000
PGD 61001067 P4D 61001067 PUD 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 2 PID: 322 Comm: bash Tainted: G        W          6.1.0-rc8+ #229
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:strcmp+0xc/0x30
Code: 75 f7 31 d2 44 0f b6 04 16 44 88 04 11 48 83 c2 01 45 84 c0 75 ee
c3 cc cc cc cc 0f 1f 00 31 c0 eb 08 48 83 c0 01 84 d2 74 13 <0f> b6 14
07 3a 14 06 74 ef 19 c0 83 c8 01 c3 cc cc cc cc 31 c3
RSP: 0018:ffff9b3b00f53c48 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffffffffba958a68 RCX: 0000000000000000
RDX: 0000000000000010 RSI: ffff91c943d33a90 RDI: ffff91c900000000
RBP: ffff91c900000000 R08: 00000018d604b529 R09: 0000000000000000
R10: ffff91c9483eddb1 R11: ffff91ca483eddab R12: ffff91c946171580
R13: ffff91c9479f0538 R14: ffff91c9457c2848 R15: ffff91c9479f0538
FS:  00007f1d1cfbe740(0000) GS:ffff91c9bdc80000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff91c900000000 CR3: 0000000006316000 CR4: 00000000000006e0
Call Trace:
<TASK>
__find_event_file+0x55/0x90
action_create+0x76c/0x1060
event_hist_trigger_parse+0x146d/0x2060
? event_trigger_write+0x31/0xd0
trigger_process_regex+0xbb/0x110
event_trigger_write+0x6b/0xd0
vfs_write+0xc8/0x3e0
? alloc_fd+0xc0/0x160
? preempt_count_add+0x4d/0xa0
? preempt_count_add+0x70/0xa0
ksys_write+0x5f/0xe0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f1d1d0cf077
Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e
fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00
f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74
RSP: 002b:00007ffcebb0e568 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000143 RCX: 00007f1d1d0cf077
RDX: 0000000000000143 RSI: 00005639265aa7e0 RDI: 0000000000000001
RBP: 00005639265aa7e0 R08: 000000000000000a R09: 0000000000000142
R10: 000056392639c017 R11: 0000000000000246 R12: 0000000000000143
R13: 00007f1d1d1ae6a0 R14: 00007f1d1d1aa4a0 R15: 00007f1d1d1a98a0
</TASK>
Modules linked in:
CR2: ffff91c900000000
---[ end trace 0000000000000000 ]---
RIP: 0010:strcmp+0xc/0x30
Code: 75 f7 31 d2 44 0f b6 04 16 44 88 04 11 48 83 c2 01 45 84 c0 75 ee
c3 cc cc cc cc 0f 1f 00 31 c0 eb 08 48 83 c0 01 84 d2 74 13 <0f> b6 14
07 3a 14 06 74 ef 19 c0 83 c8 01 c3 cc cc cc cc 31 c3
RSP: 0018:ffff9b3b00f53c48 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffffffffba958a68 RCX: 0000000000000000
RDX: 0000000000000010 RSI: ffff91c943d33a90 RDI: ffff91c900000000
RBP: ffff91c900000000 R08: 00000018d604b529 R09: 0000000000000000
R10: ffff91c9483eddb1 R11: ffff91ca483eddab R12: ffff91c946171580
R13: ffff91c9479f0538 R14: ffff91c9457c2848 R15: ffff91c9479f0538
FS:  00007f1d1cfbe740(0000) GS:ffff91c9bdc80000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff91c900000000 CR3: 0000000006316000 CR4: 00000000000006e0

Link: https://lore.kernel.org/linux-trace-kernel/20221207035143.2278781-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <zanussi@kernel.org>
Cc: stable@vger.kernel.org
Fixes: d380dcde9a07 ("tracing: Fix now invalid var_ref_vals assumption in trace action")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/DOE: Fix maximum data object length miscalculation

commit a4ff8e7a71601321f7bf7b58ede664dc0d774274 upstream.

Per PCIe r6.0, sec 6.30.1, a data object Length of 0x0 indicates 2^18
DWORDs (256K DW or 1MB) being transferred.  Adjust the value of data object
length for this case on both sending side and receiving side.

Don't bother checking whether Length is greater than SZ_1M because all
values of the 18-bit Length field are valid, and it is impossible to
represent anything larger than SZ_1M:

  0x00000    256K DW (1M bytes)
  0x00001       1 DW (4 bytes)
  ...
  0x3ffff  256K-1 DW (1M - 4 bytes)

[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20221116015637.3299664-1-ming4.li@intel.com
Fixes: 9d24322e887b ("PCI/DOE: Add DOE mailbox support functions")
Signed-off-by: Li Ming <ming4.li@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: ahci: fix enum constants for gcc-13

commit f07788079f515ca4a681c5f595bdad19cfbd7b1d upstream.

gcc-13 slightly changes the type of constant expressions that are defined
in an enum, which triggers a compile time sanity check in libata:

linux/drivers/ata/libahci.c: In function 'ahci_led_store':
linux/include/linux/compiler_types.h:357:45: error: call to '__compiletime_assert_302' declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long)
357 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)

The new behavior is that sizeof() returns the same value for the
constant as it does for the enum type, which is generally more sensible
and consistent.

The problem in libata is that it contains a single enum definition for
lots of unrelated constants, some of which are large positive (unsigned)
integers like 0xffffffff, while others like (1<<31) are interpreted as
negative integers, and this forces the enum type to become 64 bit wide
even though most constants would still fit into a signed 32-bit 'int'.

Fix this by changing the entire enum definition to use BIT(x) in place
of (1<<x), which results in all values being seen as 'unsigned' and
fitting into an unsigned 32-bit type.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107917
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107405
Reported-by: Luis Machado <luis.machado@arm.com>
Cc: linux-ide@vger.kernel.org
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: stable@vger.kernel.org
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Luis Machado <luis.machado@arm.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm cache: set needs_check flag after aborting metadata

commit 6b9973861cb2e96dcd0bb0f1baddc5c034207c5c upstream.

Otherwise the commit that will be aborted will be associated with the
metadata objects that will be torn down. Must write needs_check flag
to metadata with a reset block manager.

Found through code-inspection (and compared against dm-thin.c).

Cc: stable@vger.kernel.org
Fixes: 028ae9f76f29 ("dm cache: add fail io mode and needs_check flag")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm cache: Fix UAF in destroy()

commit 6a459d8edbdbe7b24db42a5a9f21e6aa9e00c2aa upstream.

Dm_cache also has the same UAF problem when dm_resume()
and dm_destroy() are concurrent.

Therefore, cancelling timer again in destroy().

Cc: stable@vger.kernel.org
Fixes: c6b4fcbad044e ("dm: add cache target")
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm clone: Fix UAF in clone_dtr()

commit e4b5957c6f749a501c464f92792f1c8e26b61a94 upstream.

Dm_clone also has the same UAF problem when dm_resume()
and dm_destroy() are concurrent.

Therefore, cancelling timer again in clone_dtr().

Cc: stable@vger.kernel.org
Fixes: 7431b7835f554 ("dm: add clone target")
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm integrity: Fix UAF in dm_integrity_dtr()

commit f50cb2cbabd6c4a60add93d72451728f86e4791c upstream.

Dm_integrity also has the same UAF problem when dm_resume()
and dm_destroy() are concurrent.

Therefore, cancelling timer again in dm_integrity_dtr().

Cc: stable@vger.kernel.org
Fixes: 7eada909bfd7a ("dm: add integrity target")
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm thin: Fix UAF in run_timer_softirq()

commit 88430ebcbc0ec637b710b947738839848c20feff upstream.

When dm_resume() and dm_destroy() are concurrent, it will
lead to UAF, as follows:

BUG: KASAN: use-after-free in __run_timers+0x173/0x710
Write of size 8 at addr ffff88816d9490f0 by task swapper/0/0
<snip>
Call Trace:
  <IRQ>
  dump_stack_lvl+0x73/0x9f
  print_report.cold+0x132/0xaa2
  _raw_spin_lock_irqsave+0xcd/0x160
  __run_timers+0x173/0x710
  kasan_report+0xad/0x110
  __run_timers+0x173/0x710
  __asan_store8+0x9c/0x140
  __run_timers+0x173/0x710
  call_timer_fn+0x310/0x310
  pvclock_clocksource_read+0xfa/0x250
  kvm_clock_read+0x2c/0x70
  kvm_clock_get_cycles+0xd/0x20
  ktime_get+0x5c/0x110
  lapic_next_event+0x38/0x50
  clockevents_program_event+0xf1/0x1e0
  run_timer_softirq+0x49/0x90
  __do_softirq+0x16e/0x62c
  __irq_exit_rcu+0x1fa/0x270
  irq_exit_rcu+0x12/0x20
  sysvec_apic_timer_interrupt+0x8e/0xc0

One of the concurrency UAF can be shown as below:

        use                                  free
do_resume                           |
  __find_device_hash_cell           |
    dm_get                          |
      atomic_inc(&md->holders)      |
                                    | dm_destroy
                                    |   __dm_destroy
                                    |     if (!dm_suspended_md(md))
                                    |     atomic_read(&md->holders)
                                    |     msleep(1)
  dm_resume                         |
    __dm_resume                     |
      dm_table_resume_targets       |
        pool_resume                 |
          do_waker  #add delay work |
  dm_put                            |
    atomic_dec(&md->holders)        |
                                    |     dm_table_destroy
                                    |       pool_dtr
                                    |         __pool_dec
                                    |           __pool_destroy
                                    |             destroy_workqueue
                                    |             kfree(pool) # free pool
        time out
__do_softirq
  run_timer_softirq # pool has already been freed

This can be easily reproduced using:
  1. create thin-pool
  2. dmsetup suspend pool
  3. dmsetup resume pool
  4. dmsetup remove_all # Concurrent with 3

The root cause of this UAF bug is that dm_resume() adds timer after
dm_destroy() skips cancelling the timer because of suspend status.
After timeout, it will call run_timer_softirq(), however pool has
already been freed. The concurrency UAF bug will happen.

Therefore, cancelling timer again in __pool_destroy().

Cc: stable@vger.kernel.org
Fixes: 991d9fa02da0d ("dm: add thin provisioning target")
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm thin: resume even if in FAIL mode

commit 19eb1650afeb1aa86151f61900e9e5f1de5d8d02 upstream.

If a thinpool set fail_io while suspending, resume will fail with:
device-mapper: resume ioctl on vg-thinpool  failed: Invalid argument

The thin-pool also can't be removed if an in-flight bio is in the
deferred list.

This can be easily reproduced using:

  echo "offline" > /sys/block/sda/device/state
  dd if=/dev/zero of=/dev/mapper/thin bs=4K count=1
  dmsetup suspend /dev/mapper/pool
  mkfs.ext4 /dev/mapper/thin
  dmsetup resume /dev/mapper/pool

The root cause is maybe_resize_data_dev() will check fail_io and return
error before called dm_resume.

Fix this by adding FAIL mode check at the end of pool_preresume().

Cc: stable@vger.kernel.org
Fixes: da105ed5fd7e ("dm thin metadata: introduce dm_pool_abort_metadata")
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm thin: Use last transaction's pmd->root when commit failed

commit 7991dbff6849f67e823b7cc0c15e5a90b0549b9f upstream.

Recently we found a softlock up problem in dm thin pool btree lookup
code due to corrupted metadata:

Kernel panic - not syncing: softlockup: hung tasks
CPU: 7 PID: 2669225 Comm: kworker/u16:3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Workqueue: dm-thin do_worker [dm_thin_pool]
Call Trace:
   <IRQ>
   dump_stack+0x9c/0xd3
   panic+0x35d/0x6b9
   watchdog_timer_fn.cold+0x16/0x25
   __run_hrtimer+0xa2/0x2d0
   </IRQ>
   RIP: 0010:__relink_lru+0x102/0x220 [dm_bufio]
   __bufio_new+0x11f/0x4f0 [dm_bufio]
   new_read+0xa3/0x1e0 [dm_bufio]
   dm_bm_read_lock+0x33/0xd0 [dm_persistent_data]
   ro_step+0x63/0x100 [dm_persistent_data]
   btree_lookup_raw.constprop.0+0x44/0x220 [dm_persistent_data]
   dm_btree_lookup+0x16f/0x210 [dm_persistent_data]
   dm_thin_find_block+0x12c/0x210 [dm_thin_pool]
   __process_bio_read_only+0xc5/0x400 [dm_thin_pool]
   process_thin_deferred_bios+0x1a4/0x4a0 [dm_thin_pool]
   process_one_work+0x3c5/0x730

Following process may generate a broken btree mixed with fresh and
stale btree nodes, which could get dm thin trapped in an infinite loop
while looking up data block:
Transaction 1: pmd->root = A, A->B->C   // One path in btree
                pmd->root = X, X->Y->Z   // Copy-up
Transaction 2: X,Z is updated on disk, Y write failed.
                // Commit failed, dm thin becomes read-only.
                process_bio_read_only
dm_thin_find_block
  __find_block
   dm_btree_lookup(pmd->root)
The pmd->root points to a broken btree, Y may contain stale node
pointing to any block, for example X, which gets dm thin trapped into
a dead loop while looking up Z.

Fix this by setting pmd->root in __open_metadata(), so that dm thin
will use the last transaction's pmd->root if commit failed.

Fetch a reproducer in [Link].

Linke: https://bugzilla.kernel.org/show_bug.cgi?id=216790
Cc: stable@vger.kernel.org
Fixes: 991d9fa02da0 ("dm: add thin provisioning target")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm thin: Fix ABBA deadlock between shrink_slab and dm_pool_abort_metadata

commit 8111964f1b8524c4bb56b02cd9c7a37725ea21fd upstream.

Following concurrent processes:

          P1(drop cache)                P2(kworker)
drop_caches_sysctl_handler
drop_slab
  shrink_slab
   down_read(&shrinker_rwsem)  - LOCK A
   do_shrink_slab
    super_cache_scan
     prune_icache_sb
      dispose_list
       evict
        ext4_evict_inode
ext4_clear_inode
  ext4_discard_preallocations
   ext4_mb_load_buddy_gfp
    ext4_mb_init_cache
     ext4_read_block_bitmap_nowait
      ext4_read_bh_nowait
       submit_bh
        dm_submit_bio
                 do_worker
  process_deferred_bios
   commit
    metadata_operation_failed
     dm_pool_abort_metadata
      down_write(&pmd->root_lock) - LOCK B
                      __destroy_persistent_data_objects
       dm_block_manager_destroy
        dm_bufio_client_destroy
         unregister_shrinker
  down_write(&shrinker_rwsem)
thin_map                            |
  dm_thin_find_block                 ↓
   down_read(&pmd->root_lock) --> ABBA deadlock

, which triggers hung task:

[   76.974820] INFO: task kworker/u4:3:63 blocked for more than 15 seconds.
[   76.976019]       Not tainted 6.1.0-rc4-00011-g8f17dd350364-dirty #910
[   76.978521] task:kworker/u4:3    state:D stack:0     pid:63    ppid:2
[   76.978534] Workqueue: dm-thin do_worker
[   76.978552] Call Trace:
[   76.978564]  __schedule+0x6ba/0x10f0
[   76.978582]  schedule+0x9d/0x1e0
[   76.978588]  rwsem_down_write_slowpath+0x587/0xdf0
[   76.978600]  down_write+0xec/0x110
[   76.978607]  unregister_shrinker+0x2c/0xf0
[   76.978616]  dm_bufio_client_destroy+0x116/0x3d0
[   76.978625]  dm_block_manager_destroy+0x19/0x40
[   76.978629]  __destroy_persistent_data_objects+0x5e/0x70
[   76.978636]  dm_pool_abort_metadata+0x8e/0x100
[   76.978643]  metadata_operation_failed+0x86/0x110
[   76.978649]  commit+0x6a/0x230
[   76.978655]  do_worker+0xc6e/0xd90
[   76.978702]  process_one_work+0x269/0x630
[   76.978714]  worker_thread+0x266/0x630
[   76.978730]  kthread+0x151/0x1b0
[   76.978772] INFO: task test.sh:2646 blocked for more than 15 seconds.
[   76.979756]       Not tainted 6.1.0-rc4-00011-g8f17dd350364-dirty #910
[   76.982111] task:test.sh         state:D stack:0     pid:2646  ppid:2459
[   76.982128] Call Trace:
[   76.982139]  __schedule+0x6ba/0x10f0
[   76.982155]  schedule+0x9d/0x1e0
[   76.982159]  rwsem_down_read_slowpath+0x4f4/0x910
[   76.982173]  down_read+0x84/0x170
[   76.982177]  dm_thin_find_block+0x4c/0xd0
[   76.982183]  thin_map+0x201/0x3d0
[   76.982188]  __map_bio+0x5b/0x350
[   76.982195]  dm_submit_bio+0x2b6/0x930
[   76.982202]  __submit_bio+0x123/0x2d0
[   76.982209]  submit_bio_noacct_nocheck+0x101/0x3e0
[   76.982222]  submit_bio_noacct+0x389/0x770
[   76.982227]  submit_bio+0x50/0xc0
[   76.982232]  submit_bh_wbc+0x15e/0x230
[   76.982238]  submit_bh+0x14/0x20
[   76.982241]  ext4_read_bh_nowait+0xc5/0x130
[   76.982247]  ext4_read_block_bitmap_nowait+0x340/0xc60
[   76.982254]  ext4_mb_init_cache+0x1ce/0xdc0
[   76.982259]  ext4_mb_load_buddy_gfp+0x987/0xfa0
[   76.982263]  ext4_discard_preallocations+0x45d/0x830
[   76.982274]  ext4_clear_inode+0x48/0xf0
[   76.982280]  ext4_evict_inode+0xcf/0xc70
[   76.982285]  evict+0x119/0x2b0
[   76.982290]  dispose_list+0x43/0xa0
[   76.982294]  prune_icache_sb+0x64/0x90
[   76.982298]  super_cache_scan+0x155/0x210
[   76.982303]  do_shrink_slab+0x19e/0x4e0
[   76.982310]  shrink_slab+0x2bd/0x450
[   76.982317]  drop_slab+0xcc/0x1a0
[   76.982323]  drop_caches_sysctl_handler+0xb7/0xe0
[   76.982327]  proc_sys_call_handler+0x1bc/0x300
[   76.982331]  proc_sys_write+0x17/0x20
[   76.982334]  vfs_write+0x3d3/0x570
[   76.982342]  ksys_write+0x73/0x160
[   76.982347]  __x64_sys_write+0x1e/0x30
[   76.982352]  do_syscall_64+0x35/0x80
[   76.982357]  entry_SYSCALL_64_after_hwframe+0x63/0xcd

Function metadata_operation_failed() is called when operations failed
on dm pool metadata, dm pool will destroy and recreate metadata. So,
shrinker will be unregistered and registered, which could down write
shrinker_rwsem under pmd_write_lock.

Fix it by allocating dm_block_manager before locking pmd->root_lock
and destroying old dm_block_manager after unlocking pmd->root_lock,
then old dm_block_manager is replaced with new dm_block_manager under
pmd->root_lock. So, shrinker register/unregister could be done without
holding pmd->root_lock.

Fetch a reproducer in [Link].

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216676
Cc: stable@vger.kernel.org #v5.2+
Fixes: e49e582965b3 ("dm thin: add read only and fail io modes")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm cache: Fix ABBA deadlock between shrink_slab and dm_cache_metadata_abort

commit 352b837a5541690d4f843819028cf2b8be83d424 upstream.

Same ABBA deadlock pattern fixed in commit 4b60f452ec51 ("dm thin: Fix
ABBA deadlock between shrink_slab and dm_pool_abort_metadata") to
DM-cache's metadata.

Reported-by: Zhihao Cheng <chengzhihao1@huawei.com>
Cc: stable@vger.kernel.org
Fixes: 028ae9f76f29 ("dm cache: add fail io mode and needs_check flag")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: use proper req destructor for IPv6

commit d3295fee3c756ece33ac0d935e172e68c0a4161b upstream.

Before, only the destructor from TCP request sock in IPv4 was called
even if the subflow was IPv6.

It is important to use the right destructor to avoid memory leaks with
some advanced IPv6 features, e.g. when the request socks contain
specific IPv6 options.

Fixes: 79c0949e9a09 ("mptcp: Add key generation and token tree")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: dedicated request sock for subflow in v6

commit 34b21d1ddc8ace77a8fa35c1b1e06377209e0dae upstream.

tcp_request_sock_ops structure is specific to IPv4. It should then not
be used with MPTCP subflows on top of IPv6.

For example, it contains the 'family' field, initialised to AF_INET.
This 'family' field is used by TCP FastOpen code to generate the cookie
but also by TCP Metrics, SELinux and SYN Cookies. Using the wrong family
will not lead to crashes but displaying/using/checking wrong things.

Note that 'send_reset' callback from request_sock_ops structure is used
in some error paths. It is then also important to use the correct one
for IPv4 or IPv6.

The slab name can also be different in IPv4 and IPv6, it will be used
when printing some log messages. The slab pointer will anyway be the
same because the object size is the same for both v4 and v6. A
BUILD_BUG_ON() has also been added to make sure this size is the same.

Fixes: cec37a6e41aa ("mptcp: Handle MP_CAPABLE options for outgoing connections")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: remove MPTCP 'ifdef' in TCP SYN cookies

commit 3fff88186f047627bb128d65155f42517f8e448f upstream.

To ease the maintenance, it is often recommended to avoid having #ifdef
preprocessor conditions.

Here the section related to CONFIG_MPTCP was quite short but the next
commit needs to add more code around. It is then cleaner to move
specific MPTCP code to functions located in net/mptcp directory.

Now that mptcp_subflow_request_sock_ops structure can be static, it can
also be marked as "read only after init".

Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: netlink: fix some error return code

commit e0fe1123ab2b07d2cd5475660bd0b4e6993ffaa7 upstream.

Fix to return negative error code -EINVAL from some error handling
case instead of 0, as done elsewhere in those functions.

Fixes: 9ab4807c84a4 ("mptcp: netlink: Add MPTCP_PM_CMD_ANNOUNCE")
Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment")
Cc: stable@vger.kernel.org
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: dlm: retry accept() until -EAGAIN or error returns

commit f0f4bb431bd543ed7bebbaea3ce326cfcd5388bc upstream.

This patch fixes a race if we get two times an socket data ready event
while the listen connection worker is queued. Currently it will be
served only once but we need to do it (in this case twice) until we hit
-EAGAIN which tells us there is no pending accept going on.

This patch wraps an do while loop until we receive a return value which
is different than 0 as it was done before commit d11ccd451b65 ("fs: dlm:
listen socket out of connection hash").

Cc: stable@vger.kernel.org
Fixes: d11ccd451b65 ("fs: dlm: listen socket out of connection hash")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: dlm: fix sock release if listen fails

commit 08ae0547e75ec3d062b6b6b9cf4830c730df68df upstream.

This patch fixes a double sock_release() call when the listen() is
called for the dlm lowcomms listen socket. The caller of
dlm_listen_for_all should never care about releasing the socket if
dlm_listen_for_all() fails, it's done now only once if listen() fails.

Cc: stable@vger.kernel.org
Fixes: 2dc6b1158c28 ("fs: dlm: introduce generic listen")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless

[ Upstream commit fd28941cff1cd9d8ffa59fe11eb64148e09b6ed6 ]

It seems that the firmware is broken and does not accept
the UAC_EP_CS_ATTR_SAMPLE_RATE URB. There is only one rate (48000Hz)
available in the descriptors for the output endpoint.

Create a new quirk QUIRK_FLAG_FIXED_RATE to skip the rate setup
when only one rate is available (fixed).

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216798
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20221215153037.1163786-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: Ignore HP Envy x360 eu0009nv stylus battery

[ Upstream commit cec827d658dd5c287ea8925737d45f0a60e47422 ]

Battery status is reported for the HP Envy x360 eu0009nv stylus even
though it does not have battery.

Prevent it from always reporting the battery as low (1%).

Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/823
Reported-by: Ioannis Iliopoulos <jxftw2424@gmail.com>
Tested-by: Ioannis Iliopoulos <jxftw2424@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: x86-android-tablets: Add Advantech MICA-071 extra button

[ Upstream commit b03ae77e7e057f4b3b858f10c840557e71448a91 ]

The Advantech MICA-071 is a standard Windows tablet, but it has an extra
"quick launch" button which is not described in the ACPI tables in anyway.

Use the x86-android-tablets infra to create a gpio-button device for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221127221928.123660-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: x86-android-tablets: Add Lenovo Yoga Tab 3 (YT3-X90F) charger + fuel-gauge data

[ Upstream commit b6c14ff1deaafd30036ec36d5205acd5a578b1cd ]

The Lenovo Yoga Tab 3 (YT3-X90F) is an Intel Cherry Trail based tablet
which ships with Android as Factory OS. Its DSDT contains a bunch of I2C
devices which are not actually there, causing various resource conflicts.
Use acpi_quirk_skip_i2c_client_enumeration() to not enumerate these.

The YT3-X90F has quite a bit of exotic hardware, this adds initial
support by manually instantiating the i2c-clients for the 2 charger +
2 fuel-gauge chips used for the 2 batteries.

Support for other parts of the hw will be added by follow-up patches.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221127182458.104528-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: x86-android-tablets: Add Medion Lifetab S10346 data

[ Upstream commit 902ce18ab1f4444ff9d49865bea35a07adcc03fd ]

The Medion Lifetab S10346 is a x86 ACPI tablet which ships with Android
x86 as factory OS. Its DSDT contains a bunch of I2C devices which are not
actually there, causing various resource conflicts. Enumeration of these
is skipped through the acpi_quirk_skip_i2c_client_enumeration().

Add support for manually instantiating the I2C devices which are
actually present on this tablet by adding the necessary device info to
the x86-android-tablets module.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20221208110224.107354-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/cirrus: Add extra 10 ms delay to allow PLL settle and lock.

[ Upstream commit 9fb9fa18fb50d1a33a1bd947681fce96fc2c8db6 ]

New HW platforms with multiple CS42L42 parts, faster CPU and i2c
requre some extra delay to allow PLL to settle and lock. Adding
extra 10ms delay.

Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221205145713.23852-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: intel-uncore-freq: add Emerald Rapids support

[ Upstream commit 9c252ecf30360cb7b4dbcc275aebe5642174fd39 ]

Make Intel uncore frequency driver support Emerald Rapids by adding its
CPU model to the match table.

Emerald Rapids uncore frequency control is the same as in Sapphire
Rapids.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: ideapad-laptop: Stop writing VPCCMD_W_TOUCHPAD at probe time

[ Upstream commit a10ba160d427e78ffa2ab15a86cacaec291fa58a ]

Commit d69cd7eea93e ("platform/x86: ideapad-laptop: Disable touchpad_switch
for ELAN0634") from Janary 2021 added a flag hiding the touchpad sysfs-attr
and disabling ideapad_sync_touchpad_state() because some devices
"do not use EC to switch touchpad".

At the same time this added a write(VPCCMD_W_TOUCHPAD, 1) call at probe
time on these same devices. This seems to be copied from the rfkill code
which does something similar when hw rfkill support is disabled.

But for the rfkill code this is known to be necessary on some models,
where as for the touchpad control no motivation is given for doing this
and prior to this patch there were no reports of needing to do this.

So this seems unnecessary; and it is best to avoid poking the hardware
unnecessary to avoid unwanted side effects, so remove this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20221117110244.67811-6-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: ideapad-laptop: Send KEY_TOUCHPAD_TOGGLE on some models

[ Upstream commit 5829f8a897e4f030cd2d32a930eea8954ab5dcd3 ]

On recent Ideapad models the EC does not control the touchpad at all,
so instead of sending KEY_TOUCHPAD_ON/ _OFF on touchpad toggle hotkey
events, ideapad-laptop should send KEY_TOUCHPAD_TOGGLE and let userspace
handle the toggling.

Check for this by checking if the value read from VPCCMD_R_TOUCHPAD
actually changes when receiving a touchpad-toggle hotkey event; and
if it does not change send KEY_TOUCHPAD_TOGGLE to userspace to let
userspace enable/disable the touchpad in software.

Note this also drops the priv->features.touchpad_ctrl_via_ec check from
ideapad_sync_touchpad_state() so that KEY_TOUCHPAD_TOGGLE will be send
on laptops where this is not set too. This can be safely dropped now
because the i8042_command(I8042_CMD_AUX_ENABLE/_DISABLE) call is now
guarded by its own feature flag.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20221117110244.67811-5-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: ideapad-laptop: Only toggle ps2 aux port on/off on select models

[ Upstream commit c69e7d843d2c34b80b8731a5dc57c34ea04a3edf ]

Recently there have been multiple patches to disable the ideapad-laptop's
touchpad control code, because it is causing issues on various laptops:

Commit d69cd7eea93e ("platform/x86: ideapad-laptop: Disable touchpad_switch for ELAN0634")
Commit a231224a601c ("platform/x86: ideapad-laptop: Disable touchpad_switch")

The turning on/off of the ps2 aux port was added specifically for
the IdeaPad Z570, where the EC does toggle the touchpad on/off LED and
toggles the value returned by reading VPCCMD_R_TOUCHPAD, but it does not
actually turn on/off the touchpad.

The ideapad-laptop code really should not be messing with the i8042
controller on all devices just for this special case.

Add a new ctrl_ps2_aux_port flag set based on a DMI based allow-list
for devices which need this workaround, populating it with just
the Ideapad Z570 for now.

This also adds a module parameter so that this behavior can easily
be enabled on other models which may need it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20221117110244.67811-4-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: ideapad-laptop: Do not send KEY_TOUCHPAD* events on probe / resume

[ Upstream commit f4dd8c44bb831ff885680bc77111fa39c193a93f ]

The sending of KEY_TOUCHPAD* events is causing spurious touchpad OSD
showing on resume.

Disable the sending of events on probe / resume to fix this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20221117110244.67811-3-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: ideapad-laptop: Refactor ideapad_sync_touchpad_state()

[ Upstream commit 289a59895e7a380cdc7fe2780d3073f4b9237020 ]

Add an error exit for read_ec_data() failing instead of putting the main
body in an if (success) block.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20221117110244.67811-2-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: video: Prefer native over vendor

[ Upstream commit fb1836c91317e0770950260dfa91eb9b2170cb27 ]

When available prefer native backlight control over vendor backlight
control.

Testing has shown that there are quite a few laptop models which rely
on native backlight control (they don't have ACPI video bus backlight
control) and on which acpi_osi_is_win8() returns false.

Currently __acpi_video_get_backlight_type() returns vendor on these
laptops, leading to an empty /sys/class/backlight.

As a workaround for this acpi_video_backlight_use_native() has been
temporarily changed to always return true.

This re-introduces the problem of having multiple backlight
devices under /sys/class/backlight for a single panel.

Change __acpi_video_get_backlight_type() to prefer native over vendor
when available. So that it returns native on these models.

And change acpi_video_backlight_use_native() back to only return
true when __acpi_video_get_backlight_type() returns native.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: video: Simplify __acpi_video_get_backlight_type()

[ Upstream commit a5df42521f328b45c9d89c13740e747be08ac66e ]

Simplify __acpi_video_get_backlight_type() removing a nested if which
makes the flow harder to follow.

This also results in having only 1 exit point with
return acpi_backlight_native instead of 2.

Note this drops the (video_caps & ACPI_VIDEO_BACKLIGHT) check from
the if (acpi_osi_is_win8() && native_available) return native path.
Windows 8's hardware certification requirements include that there must
be ACPI video bus backlight control, so the ACPI_VIDEO_BACKLIGHT check
is redundant.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: ideapad-laptop: support for more special keys in WMI

[ Upstream commit f32e02417614d3588a3954dab2a70320c43d1010 ]

The event data of the WMI event 0xD0, which is assumed to be the
fn_lock, is used to indicate several special keys on newer Yoga 7/9
laptops.

The notify_id 0xD0 is non-unique in the DSDT of the Yoga 9 14IAP7, this
causes wmi_get_event_data() to report wrong values.
Port the ideapad-laptop WMI code to the wmi bus infrastructure which
does not suffer from the shortcomings of wmi_get_event_data().

Signed-off-by: Philipp Jungkamp <p.jungkamp@gmx.net>
Link: https://lore.kernel.org/r/20221116110647.3438-1-p.jungkamp@gmx.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: ideapad-laptop: Add new _CFG bit numbers for future use

[ Upstream commit be5dd7d8359de9fb22115a63f09981cdf689db4f ]

Later IdeaPads report various things in last 8 bits of _CFG, at least
5 of them represent supported on-screen-displays. Add those bit numbers
to the enum, and use CFG_OSD_ as prefix of their names. Also expose
the values of these bits to debugfs, since they can be useful.

Signed-off-by: Eray Orçunus <erayorcunus@gmail.com>
Acked-by: Ike Panhc <ike.pan@canonical.com>
Link: https://lore.kernel.org/r/20221029120311.11152-5-erayorcunus@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: ideapad-laptop: Revert "check for touchpad support in _CFG"

[ Upstream commit 5831882880e9a1749553e78f9d8369fe33116aaf ]

Last 8 bit of _CFG started being used in later IdeaPads, thus 30th bit
doesn't always show whether device supports touchpad or touchpad switch.
Remove checking bit 30 of _CFG, so older IdeaPads like S10-3 can switch
touchpad again via touchpad attribute.

This reverts commit b3ed1b7fe378 ("platform/x86: ideapad-laptop: check for
touchpad support in _CFG").

Signed-off-by: Eray Orçunus <erayorcunus@gmail.com>
Acked-by: Ike Panhc <ike.pan@canonical.com>
Link: https://lore.kernel.org/r/20221029120311.11152-2-erayorcunus@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: thinkpad_acpi: Fix max_brightness of thinklight

[ Upstream commit db5e2a4ca0a7a5fe54f410590292ea2e91de6798 ]

Thinklight has only two values, on/off so it's reasonable for
max_brightness to be 0 and 1 as if you write anything between 0 and 255
it will be 255 anyway so there's no point for it to be 255.

This may look like it is a userspace API change, but writes with
a value larget then the new max_brightness will still be accepted,
these will be silently clamped to the new max_brightness by
led_set_brightness_nosleep(). So no userspace API problems are
expected.

Reported-by: Michał Szczepaniak <m.szczepaniak.000@gmail.com>
Link: https://lore.kernel.org/platform-driver-x86/55400326-e64f-5444-94e5-22b8214d00b6@gmail.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/realtek: Apply dual codec fixup for Dell Latitude laptops

[ Upstream commit a4517c4f3423c7c448f2c359218f97c1173523a1 ]

The Dell Latiture 3340/3440/3540 laptops with Realtek ALC3204 have
dual codecs and need the ALC1220_FIXUP_GB_DUAL_CODECS to fix the
conflicts of Master controls. The existing headset mic fixup for
Dell is also required to enable the jack sense and the headset mic.

Introduce a new fixup to fix the dual codec and headset mic issues
for particular Dell laptops since other old Dell laptops with the
same codec configuration are already well handled by the fixup in
alc269_fallback_pin_fixup_tbl[].

Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221226114303.4027500-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: patch_realtek: Fix Dell Inspiron Plus 16

[ Upstream commit 2912cdda734d9136615ed05636d9fcbca2a7a3c5 ]

The Dell Inspiron Plus 16, in both laptop and 2in1 form factor, has top
speakers connected on NID 0x17, which the codec reports as unconnected.
These speakers should be connected to the DAC on NID 0x03.

Signed-off-by: Philipp Jungkamp <p.jungkamp@gmx.net>
Link: https://lore.kernel.org/r/20221205163713.7476-1-p.jungkamp@gmx.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: a4517c4f3423 ("ALSA: hda/realtek: Apply dual codec fixup for Dell Latitude laptops")
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Resolve fext program type when checking map compatibility

[ Upstream commit 1c123c567fb138ebd187480b7fc0610fcb0851f5 ]

The bpf_prog_map_compatible() check makes sure that BPF program types are
not mixed inside BPF map types that can contain programs (tail call maps,
cpumaps and devmaps). It does this by setting the fields of the map->owner
struct to the values of the first program being checked against, and
rejecting any subsequent programs if the values don't match.

One of the values being set in the map owner struct is the program type,
and since the code did not resolve the prog type for fext programs, the map
owner type would be set to PROG_TYPE_EXT and subsequent loading of programs
of the target type into the map would fail.

This bug is seen in particular for XDP programs that are loaded as
PROG_TYPE_EXT using libxdp; these cannot insert programs into devmaps and
cpumaps because the check fails as described above.

Fix the bug by resolving the fext program type to its target program type
as elsewhere in the verifier.

v3:
- Add Yonghong's ACK

Fixes: f45d5b6ce2e8 ("bpf: generalise tail call map compatibility check")
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20221214230254.790066-1-toke@redhat.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: s5p-mfc: Fix in register read and write for H264

commit 06710cd5d2436135046898d7e4b9408c8bb99446 upstream.

Few of the H264 encoder registers written were not getting reflected
since the read values were not stored and getting overwritten.

Fixes: 6a9c6f681257 ("[media] s5p-mfc: Add variants to access mfc registers")

Cc: stable@vger.kernel.org
Cc: linux-fsd@tesla.com
Signed-off-by: Smitha T Murthy <smitha.t@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: s5p-mfc: Clear workbit to handle error condition

commit d3f3c2fe54e30b0636496d842ffbb5ad3a547f9b upstream.

During error on CLOSE_INSTANCE command, ctx_work_bits was not getting
cleared. During consequent mfc execution NULL pointer dereferencing of
this context led to kernel panic. This patch fixes this issue by making
sure to clear ctx_work_bits always.

Fixes: 818cd91ab8c6 ("[media] s5p-mfc: Extract open/close MFC instance commands")
Cc: stable@vger.kernel.org
Cc: linux-fsd@tesla.com
Signed-off-by: Smitha T Murthy <smitha.t@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>