Stephen Boyd [Tue, 15 Nov 2016 02:38:35 +0000 (18:38 -0800)]
Merge tag 'v4.10-rockchip-clk1' of git://git./linux/kernel/git/mmind/linux-rockchip into clk-next
Pull Rockchip clk driver updates from Heiko Stuebner:
PLL initialization for PLLs having both an integral and fractional mode
(rk3036, rk3399) does now take into account the mode that the PLL is
actually running at.
As always also some additional and optimized PLL rates for rk3066 and
rk3399, some additional clock ids for rk3066 and some additional clocks
on rk3399 are now sucessfully handled inside their respective driver.
* tag 'v4.10-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: Ignore frac divisor for PLL equivalence when it's unused
clk: rockchip: remove more CLK_IGNORE_UNUSED for rk3399 clocktree
clk: rockchip: add 400MHz to rk3066 clock rates table
clk: rockchip: optimize 800MHz and 1GHz pll rates on RK3399
clk: rockchip: Use clock ids for cpu and peri clocks on rk3066
clk: rockchip: Add binding ids for cpu and peri clocks on rk3066
clk: rockchip: add 533.25MHz to rk3399 clock rates table
Stephen Boyd [Tue, 15 Nov 2016 02:35:42 +0000 (18:35 -0800)]
Merge tag 'clk-renesas-for-v4.10-tag1' of git://git./linux/kernel/git/geert/renesas-drivers into clk-next
Pull Renesas clk driver updates from Geert Uytterhoeven:
- SYS-DMAC, (H)SCIF, I2C, DRIF, and graphics related clocks for R-Car
M3-W,
- Minor fixes and cleanups.
* tag 'clk-renesas-for-v4.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
clk: renesas: r8a7796: Add DU and LVDS clocks
clk: renesas: r8a7796: Add VSP clocks
clk: renesas: r8a7796: Add FCP clocks
clk: renesas: cpg-mssr: Remove bogus commas from error messages
clk: renesas: r8a7796: Add DRIF clock
clk: renesas: cpg-mssr: Fix inverted debug check
clk: renesas: rcar-gen3-cpg: Always use readl()/writel()
clk: renesas: cpg-mssr: Always use readl()/writel()
clk: renesas: r8a7796: Add I2C clocks
clk: renesas: r8a7796: Add HSCIF clocks
clk: renesas: r8a7796: Add SCIF clocks
clk: renesas: r8a7796: Add SYS-DMAC clocks
Stephen Boyd [Mon, 14 Nov 2016 22:25:11 +0000 (14:25 -0800)]
Merge branch 'clk-hisi' into clk-next
* clk-hisi:
clk: hisilicon: add CRG driver for Hi3516CV300 SoC
clk: hisilicon: add CRG driver for Hi3798CV200 SoC
Pan Wen [Mon, 14 Nov 2016 02:49:54 +0000 (10:49 +0800)]
clk: hisilicon: add CRG driver for Hi3516CV300 SoC
Add CRG driver for Hi3516CV300 SoC. CRG(Clock and Reset
Generator) module generates clock and reset signals used
by other module blocks on SoC.
Signed-off-by: Pan Wen <wenpan@hisilicon.com>
Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Jiancheng Xue [Sat, 29 Oct 2016 06:13:37 +0000 (14:13 +0800)]
clk: hisilicon: add CRG driver for Hi3798CV200 SoC
Add CRG driver for Hi3798CV200 SoC. CRG(Clock and Reset
Generator) module generates clock and reset signals used
by other module blocks on SoC.
Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Stephen Boyd [Fri, 11 Nov 2016 00:50:16 +0000 (16:50 -0800)]
Merge branch 'clk-qcom-rpm' into clk-next
* clk-qcom-rpm:
clk: qcom: Add support for RPM Clocks
clk: qcom: Add support for SMD-RPM Clocks
clk: qcom: Always add factor clock for xo clocks
Georgi Djakov [Wed, 2 Nov 2016 15:56:57 +0000 (17:56 +0200)]
clk: qcom: Add support for RPM Clocks
This adds initial support for clocks controlled by the Resource
Power Manager (RPM) processor on some Qualcomm SoCs, which use
the qcom_rpm driver to communicate with RPM.
Such platforms are apq8064 and msm8960.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Georgi Djakov [Wed, 2 Nov 2016 15:56:56 +0000 (17:56 +0200)]
clk: qcom: Add support for SMD-RPM Clocks
This adds initial support for clocks controlled by the Resource
Power Manager (RPM) processor on some Qualcomm SoCs, which use
the qcom_smd_rpm driver to communicate with RPM.
Such platforms are msm8916, apq8084 and msm8974.
The RPM is a dedicated hardware engine for managing the shared
SoC resources in order to keep the lowest power profile. It
communicates with other hardware subsystems via shared memory
and accepts clock requests, aggregates the requests and turns
the clocks on/off or scales them on demand.
This driver is based on the codeaurora.org driver:
https://www.codeaurora.org/cgit/quic/la/kernel/msm-3.10/tree/drivers/clk/qcom/clock-rpm.c
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
[sboyd@codeaurora.org: Remove useless braces for single line if]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Georgi Djakov [Wed, 2 Nov 2016 15:56:58 +0000 (17:56 +0200)]
clk: qcom: Always add factor clock for xo clocks
Currently the RPM/RPM-SMD clock drivers do not register the xo clocks,
so we should always add factor clock. When we later add xo clocks support
into the drivers, we should update this function to skip registration.
By doing so we avoid any DT dependencies.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Stephen Boyd [Thu, 10 Nov 2016 23:47:56 +0000 (15:47 -0800)]
Merge branch 'clk-qcom-8994' into clk-next
* clk-qcom-8994:
clk: qcom: Add support for msm8994 global clock controller
dt-bindings: qcom: clocks: Add msm8994 clock bindings
Bastian Köcher [Fri, 4 Nov 2016 20:56:35 +0000 (13:56 -0700)]
clk: qcom: Add support for msm8994 global clock controller
The clock definition was ported from the Google 3.10 kernel tree to
work with the latest kernel.
Signed-off-by: Bastian Köcher <mail@kchr.de>
[jeremymc@redhat.com: created new commit of just dt-bindings]
Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com>
[sboyd@codeaurora.org: Tidy up commit text and Kconfig help]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Jeremy McNicoll [Fri, 4 Nov 2016 20:56:32 +0000 (13:56 -0700)]
dt-bindings: qcom: clocks: Add msm8994 clock bindings
Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com>
[sboyd@codeaurora.org: Dropped unused and incorrect GDSC defines]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Wei Yongjun [Thu, 10 Nov 2016 15:20:24 +0000 (15:20 +0000)]
clk: tegra: dfll: Use builtin_platform_driver to simplify the code
Use the builtin_platform_driver() macro to make the code simpler.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Stephen Boyd [Thu, 10 Nov 2016 01:08:28 +0000 (17:08 -0800)]
clk: qcom: ipq806x: Fix board clk rates
The clocks on these boards run at 25 MHz, not 19.2 and 27 like
other platforms. Unfortunately I copy/pasted from other similar
SoCs but forgot this one is different. Fix it.
Fixes:
a085f877a882 ("clk: qcom: Move cxo/pxo/xo into dt files")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Stephen Boyd [Tue, 8 Nov 2016 22:47:56 +0000 (14:47 -0800)]
clk: pxa: Use __iomem properly and staticize lock variable
This function is passed an __iomem pointer but we use a u32
pointer instead which makes checkers like spare complain.
Furthermore, "lock" is a pretty poor variable name for a string
that will go into lockdep reports and the symbol isn't marked
static. Cleanup all this.
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Uwe Kleine-König [Wed, 9 Nov 2016 11:00:46 +0000 (12:00 +0100)]
clk: gate: fix coding style
The : of the ?: operator should have a leading space.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
[sboyd@codeaurora.org: Also remove useless parenthesis]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Arnd Bergmann [Tue, 8 Nov 2016 14:49:31 +0000 (15:49 +0100)]
clk: pxa: fix pxa2xx_determine_rate return
The new pxa2xx_determine_rate() function seems lacking in a few
regards:
- For an exact match or no match at all, the rate is uninitialized
as reported by gcc -Wmaybe-unintialized:
drivers/clk/pxa/clk-pxa.c: In function 'pxa2xx_determine_rate':
drivers/clk/pxa/clk-pxa.c:243:5: error: 'rate' may be used uninitialized in this function
- If we get a non-exact match, the req->rate output is never set
to the actual rate but remains at the requested rate.
- We should not attempt to print a rate if none could be found
This rewrites the logic accordingly.
Fixes:
9fe694295098 ("clk: pxa: transfer CPU clock setting from pxa2xx-cpufreq")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Shunli Wang [Fri, 4 Nov 2016 07:43:06 +0000 (15:43 +0800)]
reset: mediatek: Add MT2701 reset driver
In infrasys and perifsys, there are many reset
control bits for kinds of modules. These bits are
used as actual reset controllers to be registered
into kernel's generic reset controller framework.
Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Tested-by: John Crispin <blogic@openwrt.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Shunli Wang [Fri, 4 Nov 2016 07:43:05 +0000 (15:43 +0800)]
clk: mediatek: Add MT2701 clock support
Add MT2701 clock support, include topckgen, apmixedsys,
infracfg, pericfg and subsystem clocks.
Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Tested-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Arnd Bergmann [Tue, 8 Nov 2016 14:49:30 +0000 (15:49 +0100)]
clk: pxa mark dummy helper as 'inline'
The dummy_clk_set_parent function is marked as 'static' but is
no longer referenced from the pxa25x clk driver after the last use
of the RATE_RO_OPS() macro is gone from this file, causing a
harmless build warning:
In file included from drivers/clk/pxa/clk-pxa25x.c:24:0:
drivers/clk/pxa/clk-pxa.h:146:12: error: 'dummy_clk_set_parent' defined but not used [-Werror=unused-function]
This marks the functon as 'inline', which lets the compiler simply
drop it when it gets referenced.
Fixes:
9fe694295098 ("clk: pxa: transfer CPU clock setting from pxa2xx-cpufreq")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Julius Werner [Wed, 2 Nov 2016 23:43:24 +0000 (16:43 -0700)]
clk: rockchip: Ignore frac divisor for PLL equivalence when it's unused
Rockchip RK3399 PLLs can be used in two separate modes: integral and
fractional. We can select between these two modes with the unambiguously
named DSMPD bit.
During boot, we check all PLL settings to confirm that they match our
PLL table for that frequency, and reinitialize the PLLs where they
don't. The settings checked for this include the fractional divider
field that is only used in fractional mode, even if we're in integral
mode (DSMPD = 1) and that field has no effect.
This patch changes the check to only compare the fractional divider if
we're actually in fractional mode. This way, we won't reinitialize the
PLL in cases where there's absolutely no reason for that, which may
avoid glitching child clocks that should better not be glitched (e.g.
PWM regulators).
Signed-off-by: Julius Werner <jwerner@chromium.org>
[cloned the fix to the pretty similar rk3036 pll]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Jianqun Xu [Thu, 3 Nov 2016 03:38:53 +0000 (11:38 +0800)]
clk: rockchip: remove more CLK_IGNORE_UNUSED for rk3399 clocktree
Optimize rk3399 clocktree by removing CLK_IGNORE_UNUSED of some clocks.
clocks will managered by usb:
- clk_usbphy0_480m_src
- clk_usbphy1_480m_src
- clk_usbphy_480m
clocks will be managered by pvtm:
- clk_pvtm_core_l
- clk_pvtm_core_b
- clk_pvtm_ddr
clocks will be managered by dfi:
- pclk_ddr_mon
- clk_dfimon0_timer
- clk_dfimon1_timer
- aclk_dcf
- pclk_dcf
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Paweł Jarosz [Fri, 4 Nov 2016 13:10:56 +0000 (14:10 +0100)]
clk: rockchip: add 400MHz to rk3066 clock rates table
We need this to init PLL_CPLL to 400MHz at boot.
Signed-off-by: Paweł Jarosz <paweljarosz3691@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Paul Gortmaker [Mon, 4 Jul 2016 21:12:20 +0000 (17:12 -0400)]
clk: ti: make clk-dra7-atl explicitly non-modular
The Kconfig currently controlling compilation of this code is:
arch/arm/mach-omap2/Kconfig:config SOC_DRA7XX
arch/arm/mach-omap2/Kconfig: bool "TI DRA7XX"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.
Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We also delete the MODULE_LICENSE tags etc. since all that information
is already contained at the top of the file in the comments.
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-omap@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Paul Gortmaker [Mon, 4 Jul 2016 21:12:19 +0000 (17:12 -0400)]
clk: tegra: make clk-tegra124-dfll-fcpu explicitly non-modular
The Kconfig currently controlling compilation of this code is:
arch/arm/mach-tegra/Kconfig:config ARCH_TEGRA_124_SOC
arch/arm/mach-tegra/Kconfig: bool "Enable support for Tegra124 family"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We also delete the MODULE_LICENSE tags etc. since all that information
is already contained at the top of the file in the comments.
Cc: Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: Prashant Gaikwad <pgaikwad@nvidia.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Aleksandr Frid <afrid@nvidia.com>
Cc: Paul Walmsley <pwalmsley@nvidia.com>
Cc: linux-clk@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Paul Gortmaker [Mon, 4 Jul 2016 21:12:14 +0000 (17:12 -0400)]
clk: mvebu: make ap806-system-controller explicitly non-modular
The Kconfig currently controlling compilation of this code is:
drivers/clk/mvebu/Kconfig:config ARMADA_AP806_SYSCON
drivers/clk/mvebu/Kconfig: bool
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.
Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: linux-clk@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Paul Gortmaker [Mon, 4 Jul 2016 21:12:13 +0000 (17:12 -0400)]
clk: mvebu: make cp110-system-controller explicitly non-modular
The Kconfig currently controlling compilation of this code is:
drivers/clk/mvebu/Kconfig:config ARMADA_CP110_SYSCON
drivers/clk/mvebu/Kconfig: bool
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.
Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: linux-clk@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Robert Jarzmik [Wed, 2 Nov 2016 21:33:06 +0000 (22:33 +0100)]
clk: pxa: transfer CPU clock setting from pxa2xx-cpufreq
This is the initial stage to transfer the pxa25x and pxa27x CPU clocks
handling from cpufreq to the clock API. More precisely, the clocks
transferred are :
- cpll : core pll, known also as the CPU core turbo frequency
- core : core, known also as the CPU actual frequency, being either the
CPU core turbo frequency or the CPU core run frequency
This transfer is a prequel to shrink the code in pxa2xx-cpufreq.c, so
that it can become, at least in devicetree builds, the casual cpufreq-dt
driver.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Rajendra Nayak [Wed, 19 Oct 2016 11:28:40 +0000 (16:58 +0530)]
clk: qcom: Add freq tables for a few rcgs
Add frequency tables for a few RCG clocks in msm8996
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Rajendra Nayak [Thu, 29 Sep 2016 08:35:46 +0000 (14:05 +0530)]
clk: qcom: Add .is_enabled ops for clk-alpha-pll
This would be useful in subsequent patches when the .set_rate operation
would need to identify if the PLL is actually enabled
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
[sboyd@codeaurora.org: Simplify return statement of is_enabled op]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Laurent Pinchart [Sat, 22 Oct 2016 11:29:06 +0000 (14:29 +0300)]
clk: renesas: r8a7796: Add DU and LVDS clocks
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Laurent Pinchart [Sat, 22 Oct 2016 11:29:05 +0000 (14:29 +0300)]
clk: renesas: r8a7796: Add VSP clocks
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Laurent Pinchart [Sat, 22 Oct 2016 11:29:04 +0000 (14:29 +0300)]
clk: renesas: r8a7796: Add FCP clocks
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Geert Uytterhoeven [Tue, 18 Oct 2016 13:59:13 +0000 (15:59 +0200)]
clk: renesas: cpg-mssr: Remove bogus commas from error messages
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Ramesh Shanmugasundaram [Thu, 13 Oct 2016 09:31:48 +0000 (10:31 +0100)]
clk: renesas: r8a7796: Add DRIF clock
This patch adds DRIF module clocks for r8a7796 SoC.
Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Rajendra Nayak [Thu, 29 Sep 2016 08:35:45 +0000 (14:05 +0530)]
clk: qcom: Enable FSM mode for votable alpha PLLs
The votable alpha PLLs need to have the fsm mode enabled as part
of the initialization. The sequence seems to be the same as used
by clk-pll, so move the function which does this into a common
place and reuse it for the clk-alpha-pll
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Rajendra Nayak [Thu, 29 Sep 2016 08:35:44 +0000 (14:05 +0530)]
clk: qcom: handle alpha PLLs with 16bit alpha val registers
Some alpha PLLs have support for only a 16bit programable Alpha Value
(as against the default 40bits). Add a flag to handle the 16bit alpha
registers
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Rajendra Nayak [Thu, 29 Sep 2016 08:35:43 +0000 (14:05 +0530)]
clk: qcom: Add support to initialize alpha plls
Add a function to do initial configuration of the alpha plls
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Rajendra Nayak [Thu, 29 Sep 2016 08:35:42 +0000 (14:05 +0530)]
clk: qcom: Add support for alpha pll hwfsm ops
Some PLLs can support an HW FSM mode (different from the Votable FSMs,
though its the same bit used to enable Votable FSMs as well as HW FSMs)
which enables the HW to do the bypass/reset/enable-output-ctrl sequence
on its own. So all thats needed from SW is to set the FSM_ENA bit.
PLL_ACTIVE_FLAG is whats used to check if the PLL is active/enabled.
Some of the PLLs which support HW FSM can also need an OFFLINE request
that needs to be toggled across the enable/disable. We use a flag to
identify such cases and handle them.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Stephen Boyd [Wed, 2 Nov 2016 01:39:07 +0000 (18:39 -0700)]
Merge branch 'clk-fixes' into clk-next
* clk-fixes:
clk: mmp: pxa910: fix return value check in pxa910_clk_init()
clk: mmp: pxa168: fix return value check in pxa168_clk_init()
clk: mmp: mmp2: fix return value check in mmp2_clk_init()
clk: qoriq: Don't allow CPU clocks higher than starting value
Abhishek Sahu [Wed, 21 Sep 2016 12:21:52 +0000 (17:51 +0530)]
clk: qcom: ipq4019: changed i2c freq table
The current I2C freq table uses MND values which is not
applicable for I2C since its RCG does not have MND
counter. This patch updates the freq table for 19.05
MHz clk frequency with FEPLL_200 parent.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Robert Jarzmik [Sun, 23 Oct 2016 12:19:29 +0000 (14:19 +0200)]
clk: pxa: export core clocks
pxaxxx_get_clk_frequency_khz() needs several clocks to be available
through clk_get(), ie. the cpu clocks, system bus clock and memory
clocks.
Add the missing clkdev so that their rate can be acquired.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Robert Jarzmik [Sun, 23 Oct 2016 12:19:28 +0000 (14:19 +0200)]
clk: pxa: b bit of clkcfg means fast bus
The meaning of this bit was inverted :
- when set to 0, system bus clock is half of the CPU run clock
- when set to 1, system bus clock is the CPU run clock
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Robert Jarzmik [Sun, 23 Oct 2016 12:19:27 +0000 (14:19 +0200)]
clk: pxa: core pll is not affected by t bit
The t bit of clkfcfg doesn't affect the core pll clock, but it makes core
clock select between core pll clock and core run clock.
As such remove it from the core pll rate reporting function, while it
remains in clk_pxa27x_core_get_parent().
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Robert Jarzmik [Sun, 23 Oct 2016 12:19:26 +0000 (14:19 +0200)]
clk: pxa: remove unused variables
This is a cleanup patch to remove unused values not used in their
respective functions.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Mingkai Hu [Wed, 7 Sep 2016 03:48:30 +0000 (11:48 +0800)]
clk: qoriq: add ls1046a support
Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Axel Lin [Sat, 10 Sep 2016 03:47:30 +0000 (11:47 +0800)]
clk: qcom: lcc-ipq806x: Fixup overriding val in regmap_read call
Drop the assignment of regmap_read return code to val, so the code checks
the value read.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Wei Yongjun [Sat, 17 Sep 2016 15:55:56 +0000 (15:55 +0000)]
clk: mmp: pxa910: fix return value check in pxa910_clk_init()
Fix the retrn value check which testing the wrong variable
in pxa910_clk_init().
Fixes:
2bc61da9f7ff ("clk: mmp: add pxa910 DT support for clock driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Wei Yongjun [Sat, 17 Sep 2016 15:54:28 +0000 (15:54 +0000)]
clk: mmp: pxa168: fix return value check in pxa168_clk_init()
Fix the retrn value check which testing the wrong variable
in pxa168_clk_init().
Fixes:
ab08aefcd12d ("clk: mmp: add pxa168 DT support for clock driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Wei Yongjun [Sat, 17 Sep 2016 15:54:13 +0000 (15:54 +0000)]
clk: mmp: mmp2: fix return value check in mmp2_clk_init()
Fix the retrn value check which testing the wrong variable
in mmp2_clk_init().
Fixes:
1ec770d92a62 ("clk: mmp: add mmp2 DT support for clock driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Julia Lawall [Sat, 1 Oct 2016 19:46:29 +0000 (21:46 +0200)]
clk: tegra: dfll: improve function-level documentation
Adjust variables to correspond to the names used in the parameter list of
the function. Move the struct device * variable up to the place where it
appears in the parameter list.
Issue detected using Coccinelle (http://coccinelle.lip6.fr/)
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Julia Lawall [Sat, 1 Oct 2016 19:46:27 +0000 (21:46 +0200)]
clk: keystone: improve function-level documentation
Adjust the documentation to use the actual function names.
Issue detected using Coccinelle (http://coccinelle.lip6.fr/)
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Marcin Wojtas [Sun, 25 Sep 2016 07:47:53 +0000 (09:47 +0200)]
clk: mvebu: migrate CP110 system controller to clk_hw API and registration
Now that we have clk_hw based provider APIs to register clks, we
can get rid of struct clk pointers while registering clks in Armada
CP110 system controller driver. This commit introduces new
API and registration for all clocks in CP110 HW blocks.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Krzysztof Kozlowski [Sun, 2 Oct 2016 20:58:14 +0000 (22:58 +0200)]
clk: Enable compile testing for s2mps11 and max77686
s2mps11 and max77686 clock drivers can be compile tested to increase
build coverage.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Geert Uytterhoeven [Tue, 4 Oct 2016 13:10:58 +0000 (15:10 +0200)]
clk: renesas: cpg-mssr: Fix inverted debug check
The intention was to enable the checks if debugging is enabled, not
disabled.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Arvind Yadav [Tue, 20 Sep 2016 10:39:47 +0000 (16:09 +0530)]
clk: nxp: clk-lpc18xx-ccu: Unmap region obtained by of_iomap
Free memory mapping, if lpc18xx_ccu_init() is not successful.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Vladimir Zapolskiy [Fri, 7 Oct 2016 01:16:55 +0000 (04:16 +0300)]
clk: lpc32xx: add a quirk for PWM and MS clock dividers
In common clock framework CLK_DIVIDER_ONE_BASED or'ed with
CLK_DIVIDER_ALLOW_ZERO flags indicates that
1) a divider clock may be set to zero value,
2) divider's zero value is interpreted as a non-divided clock.
On the LPC32xx platform clock dividers of PWM and memory card clocks
comply with the first condition, but zero value means a gated clock,
thus it may happen that the divider value is not updated when
the clock is enabled and the clock remains gated.
The change adds one-shot quirks, which check for zero value of divider
on initialization and set it to a non-zero value, therefore in runtime
a gate clock will work as expected.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Scott Wood [Mon, 17 Oct 2016 18:42:23 +0000 (13:42 -0500)]
clk: qoriq: Don't allow CPU clocks higher than starting value
The boot-time frequency of a CPU is considered its rated maximum, as we
have no other source of such information. However, this was previously
only used for chips with 80% restrictions on secondary PLLs. This
usually wasn't a problem because most chips/configs boot with a divider
of /1, with other dividers being used only for dynamic frequency
reduction. However, at least one config (LS1021A at less than 1 GHz)
uses a different divider for top speed. This was causing cpufreq to set
a frequency beyond the chip's rated speed.
This is fixed by applying a 100%-of-initial-speed limit to all CPU PLLs,
similar to the existing 80% limit that only applied to some.
Signed-off-by: Scott Wood <oss@buserror.net>
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Rajendra Nayak [Thu, 20 Oct 2016 09:38:07 +0000 (15:08 +0530)]
clk: qcom: mmcc-8996: Add gpu gdscs
Add gpu gdsc data for msm8996
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Rajendra Nayak [Thu, 20 Oct 2016 09:38:06 +0000 (15:08 +0530)]
clk: qcom: Handle the clamp_io assert/deassert sequence
Add a flag to mark gdscs which need to support the clamp deassert/assert
before and after the gdsc enable/disable
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Emil Lundmark [Wed, 12 Oct 2016 10:31:41 +0000 (12:31 +0200)]
clk: imx: improve precision of AV PLL to 1 Hz
The audio and video PLLs are designed to have a precision of 1 Hz if some
conditions are met. The current implementation only allows a precision that
depends on the rate of the parent clock. E.g., if the parent clock is 24
MHz, the precision will be 24 Hz; or more generally the precision will be
p / 10^6 Hz
where p is the parent clock rate. This comes down to how the register
values for the PLL's fractional loop divider are chosen.
The clock rate calculation for the PLL is
PLL output frequency = Fref * (DIV_SELECT + NUM / DENOM)
or with a shorter notation
r = p * (d + a / b)
In addition to all variables being integers, we also have the following
conditions:
27 <= d <= 54
-2^29 <= a <= 2^29-1
0 < b <= 2^30-1
|a| < b
Here, d, a and b are register values for the fractional loop divider. We
want to chose d, a and b such that f(p, r) = p, i.e. f is our round_rate
function. Currently, d and b are chosen as
d = r / p
b = 10^6
hence we get the poor precision. And a is defined in terms of r, d, p and
b:
a = (r - d * p) * b / p
I propose that if p <= 2^30-1 (i.e., the max value for b), we chose b as
b = p
We can do this since
|a| < b
|(r - d * p) * b / p| < b
|r - d * p| < p
Which have two solutions, one of them is when p < 0, so we can skip that
one. The other is when p > 0 and
p * (d - 1) < r < p * (d + 1)
Substitute d = r / p:
(r - p) < r < (r + p) <=> p > 0
So, as long as p > 0, we can chose b = p. This is a good choise for b since
a = (r - d * p) * b / p
= (r - d * p) * p / p
= r - d * p
r = p * (d + a / b)
= p * d + p * a / b
= p * d + p * a / p
= p * d + a
and if d = r / p:
a = r - d * p
= r - r / p * p
= 0
r = p * d + a
= p * d + 0
= p * r / p
= r
I reckon this is the intention by the design of the clock rate formula.
Signed-off-by: Emil Lundmark <emil@limesaudio.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Stephen Boyd [Wed, 2 Nov 2016 00:12:29 +0000 (17:12 -0700)]
Merge branch 'clk-fixes' into clk-next
* clk-fixes:
clk: imx: fix integer overflow in AV PLL round rate
clk: xgene: Don't call __pa on ioremaped address
clk: rockchip: don't return NULL when failing to register ddrclk branch
Stephen Boyd [Wed, 2 Nov 2016 00:08:13 +0000 (17:08 -0700)]
Merge tag 'v4.9-rockchip-clkfixes1' of git://git./linux/kernel/git/mmind/linux-rockchip into clk-fixes
Fix return value in error case of new ddrclk type.
* tag 'v4.9-rockchip-clkfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: don't return NULL when failing to register ddrclk branch
Emil Lundmark [Wed, 12 Oct 2016 10:31:40 +0000 (12:31 +0200)]
clk: imx: fix integer overflow in AV PLL round rate
Since 'parent_rate * mfn' may overflow 32 bits, the result should be
stored using 64 bits.
The problem was discovered when trying to set the rate of the audio PLL
(pll4_post_div) on an i.MX6Q. The desired rate was 196.608 MHz, but
the actual rate returned was 192.000570 MHz. The round rate function should
have been able to return 196.608 MHz, i.e., the desired rate.
Fixes:
ba7f4f557eb6 ("clk: imx: correct AV PLL rate formula")
Cc: Anson Huang <b20788@freescale.com>
Signed-off-by: Emil Lundmark <emil@limesaudio.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Xing Zheng [Tue, 1 Nov 2016 03:22:06 +0000 (11:22 +0800)]
clk: rockchip: optimize 800MHz and 1GHz pll rates on RK3399
Usually, the 800MHz and 1GHz are supplied for CPLL and NPLL in the RK3399.
But dues to the carelessly copying from RK3036 when the RK3399 bringing up,
the refdiv == 6, it will increase the lock time, and it is not an optimal
configuration.
Let's fix them for the lock time and jitter are lower:
800 MHz:
- FVCO == 2.4 GHz, revdiv == 1.
1 GHz:
- FVCO == 3 GHz, revdiv == 1.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Laura Abbott [Fri, 28 Oct 2016 16:59:38 +0000 (09:59 -0700)]
clk: xgene: Don't call __pa on ioremaped address
ioremaped addresses are not linearly mapped so the physical
address can not be figured out via __pa. More generally, there
is no guarantee that backing value of an ioremapped address
is a physical address at all. The value here is only used
for debugging so just drop the call to __pa on the ioremapped
address.
Fixes:
6ae5fd381251 ("clk: xgene: Silence sparse warnings")
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Loc Ho <lho@apm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Gabriel Fernandez [Fri, 21 Oct 2016 09:23:30 +0000 (11:23 +0200)]
clk: stm32f469: Add QSPI clock
This patch adds the QSPI clock for stm32f469 discovery board.
The gate mapping is a little bit different from stm32f429 soc.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Gabriel Fernandez [Fri, 21 Oct 2016 09:23:29 +0000 (11:23 +0200)]
clk: stm32f4: Add RTC clock
This patch introduces the support of the RTC clock.
RTC clock can have 3 sources: lsi, lse and hse_rtc.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Gabriel Fernandez [Fri, 21 Oct 2016 09:23:28 +0000 (11:23 +0200)]
clk: stm32f4: Add LSI & LSE clocks
This patch introduces the support of the LSI & LSE clocks.
The clock drivers needs to disable the power domain write protection
using syscon/regmap to enable these clocks.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Stephen Boyd [Fri, 28 Oct 2016 00:53:56 +0000 (17:53 -0700)]
Merge branch 'clk-fixes' into clk-next
* clk-fixes:
clk/samsung: Use CLK_OF_DECLARE_DRIVER initialization method for CLKOUT
Marek Szyprowski [Wed, 26 Oct 2016 06:12:20 +0000 (08:12 +0200)]
clk/samsung: Use CLK_OF_DECLARE_DRIVER initialization method for CLKOUT
The Exynos PMU node is an interrupt, clock and PMU (Power Management Unit)
controller, and these functionalities are supported by different drivers
that matches the same compatible strings.
Since commit
989eafd0b609 ("clk: core: Avoid double initialization of
clocks") the OF core flags clock controllers registered with the
CLK_OF_DECLARE() macro as OF_POPULATED, so platform devices with the same
compatible string will not be registered.
This prevents the PMU platform device to be created, so the Exynos PMU
driver is never probed. This breaks (among other things) Suspend-to-RAM.
Fix this by changing CLKOUT driver initialization method to
CLK_OF_DECLARE_DRIVER(), which doesn't clear the OF_POPULATED flag, so
later a platform device is created and the Exynos PMU platform driver
can be be probed properly.
Fixes:
989eafd0b609 ("clk: core: Avoid double initialization of clocks")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Michael Turquette [Sun, 23 Oct 2016 17:19:53 +0000 (10:19 -0700)]
Merge branch 'clk-next-oxnas' into clk-next
Neil Armstrong [Wed, 5 Oct 2016 15:07:52 +0000 (17:07 +0200)]
dt-bindings: clk: oxnas,stdclk: Add OX820 bindings
Add OX820 bindings and remove clock indices from bindings since they are present
in the dt-bindings headers files.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/
20161005150752.22618-7-narmstrong@baylibre.com
Neil Armstrong [Wed, 5 Oct 2016 15:07:51 +0000 (17:07 +0200)]
clk: oxnas: Add OX820 Gate clocks
Add support for the Oxford Semiconductor OX820 SoC gate clocks
along the OX810SE SoC support.
This rework on concerns the gate clocks since they are different.
Future PLL handling code will be added for OX820.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/
20161005150752.22618-6-narmstrong@baylibre.com
Neil Armstrong [Wed, 5 Oct 2016 15:07:50 +0000 (17:07 +0200)]
clk: oxnas: Refactor to make use of devm_clk_hw_register()
Make usage of static tables identified by the OF match table to
feed devm_clk_hw_register() and use of_clk_add_hw_provider().
This structure is cleaner and simplifies adding new SoC support while
having common probe and gate ops code.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/
20161005150752.22618-5-narmstrong@baylibre.com
Neil Armstrong [Wed, 5 Oct 2016 15:07:49 +0000 (17:07 +0200)]
clk: oxnas: Rename to clk_oxnas_gate
Rename clock ops to clk_oxnas_gate in ops and structures.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/
20161005150752.22618-4-narmstrong@baylibre.com
Neil Armstrong [Wed, 5 Oct 2016 15:07:48 +0000 (17:07 +0200)]
clk: oxnas: Add dt-bindings include file for OX820
In order to support the Oxford Semiconductor Gate clocks, add a
dedicated dt-binding include file for gate indexes.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/
20161005150752.22618-3-narmstrong@baylibre.com
Neil Armstrong [Wed, 5 Oct 2016 15:07:47 +0000 (17:07 +0200)]
clk: oxnas: Add dt-bindings include file for OX810SE
In order to prepare support for the Oxford Semiconductor OX820, add
a dt-bindings include file used by the ox810se dtsi.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/
20161005150752.22618-2-narmstrong@baylibre.com
Paweł Jarosz [Fri, 14 Oct 2016 12:16:39 +0000 (14:16 +0200)]
clk: rockchip: Use clock ids for cpu and peri clocks on rk3066
Add bindings for ACLK_CPU, HCLK_CPU, PCLK_CPU, ACLK_PERI, HCLK_PERI, PCLK_PERI.
We need this to init it's rate at boot time.
Signed-off-by: Paweł Jarosz <paweljarosz3691@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Heiko Stuebner [Fri, 21 Oct 2016 13:27:09 +0000 (15:27 +0200)]
Merge branch 'v4.10-shared/clkids' into v4.10-clk/next
Paweł Jarosz [Fri, 14 Oct 2016 12:16:39 +0000 (14:16 +0200)]
clk: rockchip: Add binding ids for cpu and peri clocks on rk3066
Add bindings for ACLK_CPU, HCLK_CPU, PCLK_CPU, ACLK_PERI, HCLK_PERI, PCLK_PERI.
We need this to init it's rate at boot time.
Signed-off-by: Paweł Jarosz <paweljarosz3691@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Xing Zheng [Fri, 21 Oct 2016 04:03:40 +0000 (12:03 +0800)]
clk: rockchip: add 533.25MHz to rk3399 clock rates table
We need to get the accurate 533.25MHz for the DP display.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Christophe JAILLET [Sun, 25 Sep 2016 11:53:58 +0000 (13:53 +0200)]
clk: at91: Fix a return value in case of error
If 'clk_hw_register()' fails, it is likely that we expect to return an
error instead of a valid pointer (which would mean success).
Fix commit
f5644f10dcfb ("clk: at91: Migrate to clk_hw based registration
and OF APIs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Masahiro Yamada [Wed, 19 Oct 2016 08:22:07 +0000 (17:22 +0900)]
clk: uniphier: rename MIO clock to SD clock for Pro5, PXs2, LD20 SoCs
I made a mistake as for naming for this block. The MIO block is not
implemented for these 3 SoCs in the first place. The current naming
will be a trouble if an SoC with both MIO and SD-ctrl blocks appear
in the future.
This driver has just been merged in the previous merge window.
Rename it before the release.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Masahiro Yamada [Wed, 19 Oct 2016 11:49:39 +0000 (20:49 +0900)]
clk: uniphier: fix memory overrun bug
The first loop of this "for" statement writes memory beyond the
allocated clk_hw_onecell_data.
It should be:
for (clk_num--; clk_num >= 0; clk_num--)
...
Or more simply:
while (--clk_num >= 0)
...
Fixes:
734d82f4a678 ("clk: uniphier: add core support code for UniPhier clock driver")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Shawn Guo [Sat, 8 Oct 2016 13:38:12 +0000 (21:38 +0800)]
clk: hi6220: use CLK_OF_DECLARE_DRIVER for sysctrl and mediactrl clock init
The hi6220-sysctrl and hi6220-mediactrl are not only clock provider but
also reset controller. It worked fine that single sysctrl/mediactrl
device node in DT can be used to initialize clock driver and populate
platform device for reset controller. But it stops working after
commit
989eafd0b609 ("clk: core: Avoid double initialization of clocks")
gets merged. The commit sets flag OF_POPULATED during clock
initialization to skip the platform device populating for the same
device node. On hi6220, it effectively makes hi6220-sysctrl reset
driver not probe any more.
The patch changes hi6220 sysctrl and mediactrl clock init macro from
CLK_OF_DECLARE to CLK_OF_DECLARE_DRIVER, so that the reset driver using
the same hardware block can continue working.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Gregory CLEMENT [Fri, 30 Sep 2016 08:33:59 +0000 (10:33 +0200)]
clk: mvebu: armada-37xx-periph: Fix the clock gate flag
For the gate part of the peripheral clock setting the bit disables the
clock and clearing it enables the clock. This is not the default behavior
of clk_gate component, so we need to use the CLK_GATE_SET_TO_DISABLE flag.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Fixes:
8ca4746a78ab ("clk: mvebu: Add the peripheral clock driver for Armada 3700")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Eric Anholt [Fri, 30 Sep 2016 17:07:27 +0000 (10:07 -0700)]
clk: bcm2835: Clamp the PLL's requested rate to the hardware limits.
Fixes setting low-resolution video modes on HDMI. Now the PLLH_PIX
divider adjusts itself until the PLLH is within bounds.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Javier Martinez Canillas [Thu, 6 Oct 2016 14:59:59 +0000 (11:59 -0300)]
clk: max77686: fix number of clocks setup for clk_hw based registration
The commit
9b4cac33adc7 ("clk: max77686: Migrate to clk_hw based OF and
registration APIs") converted the driver to use the new provider API to
register clocks using clk_hw.
But unfortunately, in the conversion it missed to set the num_clks value
which lead to the following error when trying to register a clk provider:
[ 1.963782] of_clk_max77686_get: invalid index 0
[ 1.967460] ERROR: could not get clock /rtc@
10070000:rtc_src(1)
[ 1.973638] s3c-rtc
10070000.rtc: failed to find rtc source clock
Fix it by correctly set the max77686_clk_driver_data num_clks member.
Fixes:
9b4cac33adc7 ("clk: max77686: Migrate to clk_hw based OF and registration APIs")
Reported-by: Markus Reichl <m.reichl@fivetechno.de>
Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Gregory CLEMENT [Thu, 29 Sep 2016 14:28:55 +0000 (16:28 +0200)]
clk: mvebu: armada-37xx-periph: Fix the clock provider registration
While trying using a peripheral clock on a driver, I saw that the clock
pointer returned by the provider was NULL.
The problem was a missing indirection. It was the pointer stored in the
hws array which needed to be updated not the value it contains.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Fixes:
8ca4746a78ab ("clk: mvebu: Add the peripheral clock driver for Armada 3700")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Shawn Guo [Sat, 8 Oct 2016 08:59:38 +0000 (16:59 +0800)]
clk: core: add __init decoration for CLK_OF_DECLARE_DRIVER function
The new introduced macro CLK_OF_DECLARE_DRIVER is usually used to
declare clock driver init functions, which are mostly decorated with
__init. Add __init decoration for CLK_OF_DECLARE_DRIVER function to
avoid causing section mismatch warnings on client clock drivers.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Fixes:
c7296c51ce5d ("clk: core: New macro CLK_OF_DECLARE_DRIVER")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Jean Delvare [Fri, 14 Oct 2016 12:44:13 +0000 (14:44 +0200)]
clk: mediatek: Add hardware dependency
Only propose the mediatek clock drivers on this platform, unless
build-testing.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Shunli Wang <shunli.wang@mediatek.com>
Cc: James Liao <jamesjj.liao@mediatek.com>
Cc: Erin Lo <erin.lo@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Javier Martinez Canillas [Sun, 16 Oct 2016 13:45:07 +0000 (10:45 -0300)]
clk: samsung: clk-exynos-audss: Fix module autoload
If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.
Export the module alias information using the MODULE_DEVICE_TABLE() macro.
Before this patch:
$ modinfo drivers/clk/samsung/clk-exynos-audss.ko | grep alias
alias: platform:exynos-audss-clk
After this patch:
$ modinfo drivers/clk/samsung/clk-exynos-audss.ko | grep alias
alias: platform:exynos-audss-clk
alias: of:N*T*Csamsung,exynos5420-audss-clockC*
alias: of:N*T*Csamsung,exynos5420-audss-clock
alias: of:N*T*Csamsung,exynos5410-audss-clockC*
alias: of:N*T*Csamsung,exynos5410-audss-clock
alias: of:N*T*Csamsung,exynos5250-audss-clockC*
alias: of:N*T*Csamsung,exynos5250-audss-clock
alias: of:N*T*Csamsung,exynos4210-audss-clockC*
alias: of:N*T*Csamsung,exynos4210-audss-clock
Fixes:
4d252fd5719b ("clk: samsung: Allow modular build of the Audio Subsystem CLKCON driver")
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Masahiro Yamada [Sun, 16 Oct 2016 15:25:55 +0000 (00:25 +0900)]
clk: uniphier: fix type of variable passed to regmap_read()
The 3rd argument of regmap_read() takes a pointer to unsigned int.
This driver is saved just because u32 happens to be typedef'ed as
unsigned int, but we should not rely on that fact. Change the
variable type just in case.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Masahiro Yamada [Sun, 16 Oct 2016 15:11:14 +0000 (00:11 +0900)]
clk: uniphier: add system clock support for sLD3 SoC
I do not know why, but I missed to add this compatible string in
the initial commit of this driver.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Geert Uytterhoeven [Mon, 3 Oct 2016 11:03:38 +0000 (13:03 +0200)]
clk: renesas: cpg-mssr: Fix inverted debug check
The intention was to enable the checks if debugging is enabled, not
disabled.
Fixes:
f793d1e51705b276 ("clk: shmobile: Add new CPG/MSSR driver core")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Geert Uytterhoeven [Wed, 21 Sep 2016 14:47:59 +0000 (16:47 +0200)]
clk: renesas: rcar-gen3-cpg: Always use readl()/writel()
The R-Car Gen3 CPG/MSSR driver uses a mix of clk_readl()/clk_writel()
and readl()/writel() to access the clock registers. Settle on the
generic readl()/writel().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Geert Uytterhoeven [Wed, 21 Sep 2016 14:31:41 +0000 (16:31 +0200)]
clk: renesas: cpg-mssr: Always use readl()/writel()
The Renesas CPG/MSSR driver core uses a mix of clk_readl()/clk_writel()
and readl()/writel() to access the clock registers. Settle on the
generic readl()/writel().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Ulrich Hecht [Wed, 14 Sep 2016 16:46:07 +0000 (18:46 +0200)]
clk: renesas: r8a7796: Add I2C clocks
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Ulrich Hecht [Wed, 14 Sep 2016 16:47:13 +0000 (18:47 +0200)]
clk: renesas: r8a7796: Add HSCIF clocks
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>