H.J. Lu [Sat, 20 Jun 2009 00:43:21 +0000 (00:43 +0000)]
2009-06-19 H.J. Lu <hongjiu.lu@intel.com>
* elf32-i386.c (elf_i386_check_relocs): Properly check local
symbol on error.
* elf64-x86-64.c (elf64_x86_64_check_relocs): Likewise.
Pedro Alves [Sat, 20 Jun 2009 00:16:02 +0000 (00:16 +0000)]
* solib-svr4.c (IGNORE_FIRST_LINK_MAP_ENTRY): Avoid dereferencing
NULL pointer.
(scan_dyntag): Skip if input bfd isn't elf flavoured.
(locate_base): Call elf_locate_base even without an exec_bfd.
gdbadmin [Sat, 20 Jun 2009 00:00:34 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sat, 20 Jun 2009 00:00:08 +0000 (00:00 +0000)]
daily update
Tom Tromey [Fri, 19 Jun 2009 16:01:20 +0000 (16:01 +0000)]
Fix typo in bug number
H.J. Lu [Fri, 19 Jun 2009 16:00:33 +0000 (16:00 +0000)]
bfd/
2009-06-19 H.J. Lu <hongjiu.lu@intel.com>
* elf32-i386.c (elf_i386_tls_transition): Add a parameter,
r_symndx. Report local symbol name on error.
(elf_i386_check_relocs): Updated. Report local symbol name on
error.
(elf_i386_gc_sweep_hook): Updated.
(elf_i386_relocate_section): Likewise.
* elf64-x86-64.c (elf64_x86_64_tls_transition): Add a parameter,
r_symndx. Report local symbol name on error.
(elf64_x86_64_check_relocs): Updated. Report local symbol name
on error.
(elf64_x86_64_gc_sweep_hook): Updated.
(elf64_x86_64_relocate_section): Likewise.
ld/testsuite/
2009-06-19 H.J. Lu <hongjiu.lu@intel.com>
* ld-i386/i386.exp: Run tlsgd2.
* ld-i386/tlsgd2.d: New.
* ld-i386/tlsgd2.s: Likewise.
* ld-x86-64/tlsgd3.d: Updated.
Tom Tromey [Fri, 19 Jun 2009 15:49:35 +0000 (15:49 +0000)]
2009-06-19 Samuel Bronson <naesten@gmail.com>
PR cli/9930:
* cli/cli-decode.c (apropos_cmd): Skip traversing abbreviations
for prefix commands to avoid duplicates in the output.
Tom Tromey [Fri, 19 Jun 2009 15:47:09 +0000 (15:47 +0000)]
2009-06-19 Samuel Bronson <naesten@gmail.com>
PR cli/9930:
* cli/cli-decode.c (apropos_cmd): Fix avoidance of double
printing.
Jerome Guitton [Fri, 19 Jun 2009 15:14:11 +0000 (15:14 +0000)]
* breakpoint.c (expand_line_sal_maybe): When explicit_line,
skip prologue on each sals.
(skip_prologue_sal): Return explicit_line and explicit_pc
unmodified.
Nick Clifton [Fri, 19 Jun 2009 15:05:23 +0000 (15:05 +0000)]
* ar.c (usage): Do not use #ifdef inside _("...).
* nm.c (usage): Likewise.
Tristan Gingold [Fri, 19 Jun 2009 14:32:19 +0000 (14:32 +0000)]
2009-06-19 Tristan Gingold <gingold@adacore.com>
* darwin-nat.c (_initialize_darwin_inferior): Remove commented-out
line.
Tristan Gingold [Fri, 19 Jun 2009 14:30:30 +0000 (14:30 +0000)]
2009-06-19 Tristan Gingold <gingold@adacore.com>
* machoread.c (macho_symtab_read): Adjust for bfd changes.
* darwin-nat.h (struct darwin_exception_msg): New type to describe
a mach exception.
(struct private_thread_info): New type to describe the state of the
thread.
(DEF_VEC_I thread_t): Removed, replaced by ...
(DEF_VEC_O darwin_thread_t): ... this new type.
(struct darwin_inferior): Renamed to ...
(struct private_inferior): ... this type. Fields added.
(darwin_not_port): Moved into the private inferior structure.
* darwin-nat.c: Add includes, improve comments.
Rewrite to handle multiple threads and processes.
(darwin_resume_to): New function and protype.
(darwin_resume, darwin_wait_to, darwin_wait): Ditto.
(darwin_kill_inferior): Add ops argument.
(darwin_pid_to_str): New function.
(darwin_thread_alive): Ditto.
(darwin_inf, darwin_not_port): Removed.
(darwin_inf_fake_stop): New variable.
(msgin, msgout, msg_state, exc_msg): Removed.
(mach_check_error): Use warning instead of error.
(darwin_ptrace): Adjust debug level.
(cmp_thread_t): Fix names (typo).
(darwin_check_new_threads): Argument is now an inferior,
adjust for new structures, add no change check, ignore dead ports,
handle first thread case.
(find_inferior_task_it): New function.
(find_inferior_notify_it): Ditto.
(darwin_find_inferior_by_task): Ditto.
(darwin_find_inferior_by_notify): Ditto.
(darwin_find_thread): Ditto.
(darwin_suspend_inferior): Ditto.
(darwin_resume_inferior): Ditto.
(catch_exception_raise_state): Removed.
(catch_exception_raise_state_identity): Removed.
(darwin_suspend_inferior_it): New function.
(darwin_resume_inferior_it): Ditto.
(darwin_dump_message): New function, extracted from darwin_wait.
(darwin_decode_exception_message): New function.
(darwin_encode_reply): New function.
(catch_exception_raise): Removed.
(darwin_send_reply): New function, extracted from darwin_resume.
(darwin_resume_thread): New function, extracted from darwin_resume.
(struct resume_inferior_threads_param): New type.
(darwin_resume_inferior_threads_it): New function.
(darwin_resume_inferior_threads): New function.
(darwin_suspend_inferior_threads): New function.
(darwin_resume): Mostly rewritten to handle multiple threads and
some corner cases.
(darwin_decode_message): New function extracted from darwin_wait.
(cancel_breakpoint): New function.
(darwin_wait): Mostly rewritten. Handle multiple threads.
(darwin_mourn_inferior): Adjust for per process structures.
(darwin_reply_to_all_pending_messages): New function.
(darwin_stop_inferior): Adjust for per inferior structures.
(darwin_attach_pid): Ditto.
(darwin_init_thread_list): Ditto.
(darwin_attach): Ditto.
(darwin_detach): Ditto.
(darwin_files_info): Now empty.
(darwin_pid_to_str): Adjust returns string to match one expected by
the testsuite.
(darwin_read_write_inferior): Rename err variable to match other uses.
Adjust debug message. Handle submaps.
(darwin_xfer_memory): Adjust for per inferior structures.
(set_enable_mach_exceptions): Ditto.
(darwin_pid_to_exec_file): New function.
(darwin_get_ada_task_ptid): Ditto.
(darwin_supports_multi_process): Ditto.
(_initialize_darwin_inferior): Remove useless assertion, adjust for
per inferior structures. Add new target operations.
Pedro Alves [Fri, 19 Jun 2009 13:35:35 +0000 (13:35 +0000)]
2009-06-19 Aleksandar Ristovski <aristovski@qnx.com>
Pedro Alves <pedro@codesourcery.com>
* target.h (struct target_ops) <supports_multi_process>: New
callback.
(target_supports_multi_process): New.
* server.c (handle_query): Even if GDB reports support, only
enable multi-process if the target also supports it. Report
multi-process support only if the target backend supports it.
* linux-low.c (linux_supports_multi_process): New function.
(linux_target_ops): Install it as target_supports_multi_process
callback.
Martin Schwidefsky [Fri, 19 Jun 2009 10:58:27 +0000 (10:58 +0000)]
* config/tc-s390.c (md_gather_operands): Accept an instruction
without operands if all operands are tagged as optional.
Martin Schwidefsky [Fri, 19 Jun 2009 10:55:42 +0000 (10:55 +0000)]
* s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
* s390-opc.txt (nopr, nop): Use new instruction format.
Tristan Gingold [Fri, 19 Jun 2009 09:23:54 +0000 (09:23 +0000)]
2009-06-19 Tristan Gingold <gingold@adacore.com>
* mach-o.c (bfd_mach_o_print_private_header): Fix format character.
Tristan Gingold [Fri, 19 Jun 2009 09:12:41 +0000 (09:12 +0000)]
2009-06-19 Tristan Gingold <gingold@adacore.com>
* mach-o.c (bfd_mach_o_scan_read_symtab_symbols): Add prototype.
(bfd_mach_o_version): Use bfd_mach_o_get_data instead of direct access.
(bfd_mach_o_valid): Ditto.
(bfd_mach_o_wide_p): Ditto.
(bfd_mach_o_canonicalize_reloc): Ditto.
(bfd_mach_o_build_commands): Ditto.
(bfd_mach_o_scan_read_thread): Ditto.
(bfd_mach_o_flatten_sections): Ditto.
(bfd_mach_o_scan_start_address): Ditto.
(bfd_mach_o_lookup_section): Ditto.
(bfd_mach_o_core_fetch_environment): Ditto.
(bfd_mach_o_write_contents): Ditto. Handle reexport_dylib.
(bfd_mach_o_scan_write_relocs): Adjust for bfd_mach_o_get_data.
(bfd_mach_o_scan_write_symtab): Ditto.
Use macros instead of hard-coded values.
(bfd_mach_o_scan_read_symtab_symbol): Make the function static.
Use bfd_mach_o_get_data instead of direct access. Use macros
instead of hard-coded values.
(bfd_mach_o_scan_read_symtab_strtab): Make the function static.
Remove sym argument and get section from mdata.
Move code into the else branch.
(bfd_mach_o_scan_read_symtab_symbols): Make the function static.
Remove sym argument and get section from mdata. Adjust code.
(bfd_mach_o_scan_read_dylib): Move assertion into the created
switch (which replaces consecutive if statements).
(bfd_mach_o_scan_read_dysymtab): Rename seg to cmd. Load
module table, table of content, indirect symbols and external
referenced symbols.
(bfd_mach_o_scan_read_symtab): Renames seg to symtab. Set symtab
field.
(bfd_mach_o_scan_read_linkedit): New function.
(bfd_mach_o_scan_read_str): Ditto.
(bfd_mach_o_count_symbols): Simplify the code by using the symtab
field of mdata.
(bfd_mach_o_get_symtab_upper_bound): Remove check as
bfd_mach_o_count_symbols never returns an error.
(bfd_mach_o_canonicalize_symtab): Simplify the code by using the
symtab field (there might be only one symtab).
(bfd_mach_o_scan_read_command): Handle reexported dylib.
Handle sub frameworks, sub umbrella, sub library and sub client.
Read code signature and segment split info commands.
(bfd_mach_o_scan): Reindent.
(bfd_mach_o_xlat_name): New type.
(bfd_mach_o_print_flags): New function.
(bfd_mach_o_get_name): Ditto.
(bfd_mach_o_cpu_name): New variable.
(bfd_mach_o_filetype_name, bfd_mach_o_header_flags_name)
(bfd_mach_o_section_type_name)
(bfd_mach_o_section_attribute_name)
(bfd_mach_o_load_command_name): New variables.
(bfd_mach_o_print_private_header): New function.
(bfd_mach_o_print_section_map): New function extracted from
bfd_mach_o_print_private_bfd_data.
(bfd_mach_o_print_section): Ditto. Print more infos.
(bfd_mach_o_print_segment): Ditto.
(bfd_mach_o_print_dysymtab): Ditto.
(bfd_mach_o_bfd_print_private_bfd_data): Reworked. Handle
load weak dylib, reexport dylib and id dylib.
Handle code signature and segment_split info.
Handle sub frameworks, sub umbrella, sub library and sub client.
(bfd_mach_o_section_get_nbr_indirect): New function.
* mach-o.h (BFD_MACH_O_REFERENCE_MASK): New macro. Add comment.
(bfd_mach_o_header_flags): New enum to define header flags.
(bfd_mach_o_section_attribute): New enum to replace ...
(BFD_MACH_O_S_ATTR_LOC_RELOC, BFD_MACH_O_S_ATTR_EXT_RELOC,
BFD_MACH_O_S_ATTR_SOME_INSTRUCTIONS, BFD_MACH_O_S_ATTR_DEBUG,
BFD_MACH_O_S_SELF_MODIFYING_CODE, BFD_MACH_O_S_ATTR_LIVE_SUPPORT,
BFD_MACH_O_S_ATTR_NO_DEAD_STRIP, BFD_MACH_O_S_ATTR_STRIP_STATIC_SYMS,
BFD_MACH_O_S_ATTR_NO_TOC, BFD_MACH_O_S_ATTR_PURE_INSTRUCTIONS): ...
these removed macros.
(BFD_MACH_O_NLIST_SIZE, BFD_MACH_O_NLIST_64_SIZE): New macros.
(bfd_mach_o_dylib_module): New type.
(BFD_MACH_O_DYLIB_MODULE_SIZE, BFD_MACH_O_DYLIB_MODULE_64_SIZE): New
macros.
(bfd_mach_o_dylib_table_of_content): New type.
(BFD_MACH_O_TABLE_OF_CONTENT_SIZE): New macro.
(bfd_mach_o_dylib_reference): New type.
(BFD_MACH_O_REFERENCE_SIZE): New macro.
(bfd_mach_o_dysymtab_command): Add fields for loaded and decoded
modules, toc, references and indirect syms.
(BFD_MACH_O_INDIRECT_SYMBOL_SIZE): New macro.
(bfd_mach_o_dylinker_command): Remove cmd and cmdsize fields (were
unused). Add comment.
(bfd_mach_o_dylib_command): Ditto.
(bfd_mach_o_prebound_dylib_command): Ditto.
(bfd_mach_o_linkedit_command): New type.
(bfd_mach_o_str_command): New type.
(bfd_mach_o_load_command): Add linkedit and str fields.
(mach_o_data_struct): Add symtab field.
(bfd_get_mach_o_data): Renamed to ...
(bfd_mach_o_get_data): ... this new macro.
(bfd_mach_o_scan_read_symtab_symbol,
bfd_mach_o_scan_read_symtab_strtab,
bfd_mach_o_scan_read_symtab_symbols): Prototypes removed.
* mach-o-i386.c (bfd_mach_o_i386_mkobject): Use bfd_mach_o_get_data
instead of direct access.
Alan Modra [Fri, 19 Jun 2009 03:30:45 +0000 (03:30 +0000)]
* elf32-ppc.c (ppc_elf_check_relocs): Allow local symbols for
R_PPC_PLTREL24 relocs.
(ppc_elf_relocate_section): Likewise.
Alan Modra [Fri, 19 Jun 2009 00:41:28 +0000 (00:41 +0000)]
* elf32-ppc.c (find_plt_ent): Pass pointer to plist rather than
pointer to sym hash. Update all uses.
(update_plt_info): Likewise. Don't check addend here.
gdbadmin [Fri, 19 Jun 2009 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Fri, 19 Jun 2009 00:00:05 +0000 (00:00 +0000)]
daily update
Michael Snyder [Thu, 18 Jun 2009 23:55:57 +0000 (23:55 +0000)]
2009-06-14 Hui Zhu <teawater@gmail.com>
Michael Snyder <msnyder@vmware.com>
* infrun.c (handle_inferior_event): Reverse-next through
trampoline.
Michael Snyder [Thu, 18 Jun 2009 23:41:27 +0000 (23:41 +0000)]
2009-06-18 Hui Zhu <teawater@gmail.com>
Michael Snyder <msnyder@vmware.com>
* infrun.c (handle_inferior_event): Improve reverse stepping
through function epilogue.
Alan Modra [Thu, 18 Jun 2009 23:16:05 +0000 (23:16 +0000)]
* gas/cfi/cfi-common-7.s: Skip a multiple of four.
* gas/cfi/cfi-common-7.d: Adjust.
Nick Clifton [Thu, 18 Jun 2009 16:36:05 +0000 (16:36 +0000)]
PR 10169
* gas/tc-arm.c (do_t_ssat): Move common code from here...
(do_t_usat): ... and here to...
(do_t_ssat_usat): New function: ... here. Add code to check that
the shift value, if present, is in range.
* gas/arm/thumb2_bad_reg.s: Add tests for SSAT and USAT with an
out of range shift.
* gas/arm/thumb2_bad_reg.l: Update expected error messages.
H.J. Lu [Thu, 18 Jun 2009 15:49:39 +0000 (15:49 +0000)]
2009-06-18 H.J. Lu <hongjiu.lu@intel.com>
* elf32-i386.c (elf_i386_check_relocs): Remove isymbuf and use
bfd_sym_from_r_symndx.
* elf64-x86-64.c (elf64_x86_64_check_relocs): Likewise.
Alan Modra [Thu, 18 Jun 2009 14:18:29 +0000 (14:18 +0000)]
* elf-bfd.h (struct sym_sec_cache): Delete.
(struct sym_cache): New.
(bfd_section_from_r_symndx): Delete prototype.
(bfd_sym_from_r_symndx): Define prototype.
* elf.c (bfd_section_from_r_symndx): Delete, replace with..
(bfd_sym_from_r_symndx): ..new function.
* elf32-arm.c: Update all uses of struct sym_sec_cache and
bfd_section_from_r_symndx to new struct and function.
* elf32-bfin.c: Likewise.
* elf32-hppa.c: Likewise.
* elf32-i386.c: Likewise.
* elf32-m32r.c: Likewise.
* elf32-m68hc1x.c: Likewise.
* elf32-m68hc1x.h: Likewise.
* elf32-m68k.c: Likewise.
* elf32-ppc.c: Likewise.
* elf32-s390.c: Likewise.
* elf32-sh.c: Likewise.
* elf64-ppc.c: Likewise.
* elf64-s390.c: Likewise.
* elf64-x86-64.c: Likewise.
* elfxx-sparc.c: Likewise.
* elfxx-sparc.h: Likewise.
Paul Pluzhnikov [Thu, 18 Jun 2009 14:02:18 +0000 (14:02 +0000)]
2009-06-18 Paul Pluzhnikov <ppluzhnikov@google.com>
* dwarf2-frame.c (struct comp_unit): Use bfd_size_type for
dwarf_frame_size.
H.J. Lu [Thu, 18 Jun 2009 12:49:41 +0000 (12:49 +0000)]
2009-06-18 H.J. Lu <hongjiu.lu@intel.com>
* elf32-i386.c (elf_i386_check_relocs): Cache or free isymbuf.
* elf64-x86-64.c (elf64_x86_64_check_relocs): Likewise.
Nick Clifton [Thu, 18 Jun 2009 10:48:58 +0000 (10:48 +0000)]
* elflink.c (elf_link_sort_relocs): Return early if there are no
relocs to sort.
Nick Clifton [Thu, 18 Jun 2009 10:41:42 +0000 (10:41 +0000)]
Fix formatting of recent entry
Nick Clifton [Thu, 18 Jun 2009 10:31:21 +0000 (10:31 +0000)]
PR 10288
* arm-dis.c (print_insn_coprocessor): Check that a user specified
ARM architecture supports the matched instruction.
(print_insn_arm): Likewise.
(select_arm_features): New function. Fills in the fields of an
arm_feature_set structure based on a given arm machine number.
(print_insn): Initialise an arm_feature_set structure.
* objdump.c (disassemble_bytes): Set the
USER_SPECIFIED_MACHINE_TYPE flag in the disassemble_info structure
if the user has invoked the -m switch.
* doc/binutils.texi: Document the additional behaviour of
objdump's -m switch for ARM targets.
* dis-asm.h (USER_SPECIFIED_MACHINE_TYPE): New value for the flags
field of struct disassemble_info.
* gas/arm/align.s: Add labels so that COFF based targets can
correctly locate THUMB code.
* gas/arm/copro.d: Do not pass --architecture switch to objdump.
Dave Korn [Thu, 18 Jun 2009 02:47:51 +0000 (02:47 +0000)]
* ld-pe/pe-run.exp (proc test_direct_link_dll): Always pass
--enable-auto-import to the linker.
* ld-pe/vers-script-1.d: Replace '\$' by '_' in all symbol names.
* ld-pe/vers-script-3.d: Likewise.
* ld-pe/vers-script-4.d: Likewise.
* ld-pe/vers-script-dll.c: Likewise.
* lib/ld-lib.exp (proc is_pecoff_format): Also return true for
"*-*-cegcc*" targets.
Dave Korn [Thu, 18 Jun 2009 02:11:03 +0000 (02:11 +0000)]
2009-06-18 Dave Korn <dave.korn.cygwin@gmail.com>
Merge cegcc and mingw32ce target name changes from CeGCC project,
replacing "arm-*-" by "arm*-*-" where needed.
2008-09-24 Pedro Alves <pedroalves@users.sourceforge.net>
ld/
* configure.tgt (arm*-*-cegcc*): Set LIB_PATH to
${tooldir}/lib/w32api.
2007-12-25 Pedro Alves <pedro_alves@portugalmail.pt>
bfd/
* config.bfd: Add arm*-*-cegcc* target.
2007-12-25 Pedro Alves <pedro_alves@portugalmail.pt>
binutils/
* configure.in: Add arm*-*-cegcc* and arm*-*-mingw32ce* targets.
* configure: Regenerate.
2007-12-25 Pedro Alves <pedro_alves@portugalmail.pt>
gas/
* configure.tgt: Add arm*-*-cegcc* target.
2007-12-25 Pedro Alves <pedro_alves@portugalmail.pt>
ld/
* configure.tgt: Add arm*-*-cegcc* target.
2007-12-17 Pedro Alves <pedro_alves@portugalmail.pt>
bfd/
* config.bfd: Add arm-*-mingw32ce* target.
2007-12-17 Pedro Alves <pedro_alves@portugalmail.pt>
gas/
* configure.tgt: Add arm-*-mingw32ce* target.
2007-12-17 Pedro Alves <pedro_alves@portugalmail.pt>
ld/
* configure.tgt: Add arm-*-mingw32ce* target.
H.J. Lu [Thu, 18 Jun 2009 00:45:14 +0000 (00:45 +0000)]
2009-06-17 H.J. Lu <hongjiu.lu@intel.com>
* elf-bfd.h (_bfd_elf_allocate_ifunc_dyn_relocs): New.
* elf-ifunc.c (_bfd_elf_allocate_ifunc_dyn_relocs): Likewise.
* elf32-i386.c (elf_i386_allocate_dynrelocs): Use it.
* elf64-x86-64.c (elf64_x86_64_allocate_dynrelocs): Likewise.
2009-06-17 H.J. Lu <hongjiu.lu@intel.com>
* elf-bfd.h (_bfd_elf_create_ifunc_dyn_reloc): New.
* elf-ifunc.c (_bfd_elf_create_ifunc_dyn_reloc): Likewise.
* elf32-i386.c (elf_i386_check_relocs): Use it.
* elf64-x86-64.c (elf64_x86_64_check_relocs): Likewise.
2009-06-17 H.J. Lu <hongjiu.lu@intel.com>
* elf-bfd.h (elf_dyn_relocs): New.
* elf32-i386.c (elf_i386_dyn_relocs): Removed.
(elf_i386_link_hash_entry): Replace elf_i386_dyn_relocs with
elf_dyn_relocs.
(elf_i386_copy_indirect_symbol): Likewise.
(elf_i386_check_relocs): Likewise.
(elf_i386_gc_sweep_hook): Likewise.
(elf_i386_allocate_dynrelocs): Likewise.
(elf_i386_readonly_dynrelocs): Likewise.
(elf_i386_size_dynamic_sections): Likewise.
* elf64-x86-64.c (elf64_x86_64_dyn_relocs): Removed.
(elf64_x86_64_link_hash_entry): Replace elf64_x86_64_dyn_relocs
with elf_dyn_relocs.
(elf64_x86_64_copy_indirect_symbol): Updated.
(elf64_x86_64_check_relocs): Likewise.
(elf64_x86_64_gc_sweep_hook): Likewise.
(elf64_x86_64_adjust_dynamic_symbol): Likewise.
(elf64_x86_64_allocate_dynrelocs): Likewise.
(elf64_x86_64_readonly_dynrelocs): Likewise.
(elf64_x86_64_size_dynamic_sections): Likewise.
gdbadmin [Thu, 18 Jun 2009 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Thu, 18 Jun 2009 00:00:09 +0000 (00:00 +0000)]
daily update
Pierre Muller [Wed, 17 Jun 2009 22:46:09 +0000 (22:46 +0000)]
* lib/gdb.exp (gdb_compile): Also force unbuffered mode for DJGPP
target.
Tom Tromey [Wed, 17 Jun 2009 20:29:42 +0000 (20:29 +0000)]
* dwarf2read.c (zlib_decompress_section): Use a cleanup.
Ulrich Weigand [Wed, 17 Jun 2009 18:50:31 +0000 (18:50 +0000)]
* gdbarch.sh (pointer_to_address): Change to type 'm'.
(address_to_pointer): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.
* inferior.h (unsigned_pointer_to_address): Add GDBARCH argument.
(signed_pointer_to_address): Likewise.
(unsigned_address_to_pointer, address_to_signed_pointer): Likewise.
* findvar.c (unsigned_pointer_to_address): Likewise.
(signed_pointer_to_address): Likewise.
(unsigned_address_to_pointer, address_to_signed_pointer): Likewise.
* avr-tdep.c (avr_address_to_pointer): Likewise.
(avr_pointer_to_address): Likewise.
* iq2000-tdep.c (iq2000_pointer_to_address): Likewise.
(iq2000_address_to_pointer): Likewise.
* m32c-tdep.c (m32c_m16c_address_to_pointer): Likewise.
(m32c_m16c_pointer_to_address): Likewise.
* spu-tdep.c (spu_pointer_to_address): Likewise.
* xstormy16-tdep.c (xstormy16_pointer_to_address): Likewise.
(xstormy16_address_to_pointer): Likewise.
Ulrich Weigand [Wed, 17 Jun 2009 18:49:37 +0000 (18:49 +0000)]
ChangeLog:
* printcmd.c (print_scalar_formatted): Always truncate
unsigned data types.
* cli-dump.c (struct callback_data): Change type of load_offset
to CORE_ADDR.
(restore_binary_file): Update type casts.
(restore_command): Parse load_offset as address, not long.
* utils.c (string_to_core_addr): Do not sign-extend value.
* varobj.c (find_frame_addr_in_frame_chain): Truncate frame_base
before comparing against requested frame address.
testsuite/ChangeLog:
* gdb.base/dump.exp: Handle SPU like 64-bit platforms.
Ulrich Weigand [Wed, 17 Jun 2009 18:48:26 +0000 (18:48 +0000)]
* gdbarch.sh (gcore_bfd_target): New gdbarch callback.
* gdbarch.h, gdbarch.c: Regenerate.
* gcore.c (default_gcore_target): Make return value const.
Call gdbarch_gcore_bfd_target if present.
(default_gcore_arch, default_gcore_mach): Use target_gdbarch.
* corelow.c (core_read_description): Call gdbarch_core_read_description
on core_gdbarch instead of current_gdbarch.
* ppc-linux-tdep.c (ppc_linux_init_abi): Install gcore_bfd_target.
Ulrich Weigand [Wed, 17 Jun 2009 18:47:35 +0000 (18:47 +0000)]
* gdbtypes.c (create_string_type): Receive character type as argument.
* gdbtypes.h (create_string_type): Add character type argument.
* dwarf2read.c (read_tag_string_type): Pass character type to
create_string_type.
* value.h (value_string): Add character type argument.
* valops.c (value_string): Add character type argument. Pass it to
create_string_type. Do not allocate space in inferior.
* valarith.c (value_concat): Pass character type to value_string.
* value.h (value_typed_string): Rename to ...
(value_cstring): ... this.
* valops.c (value_typed_string): Rename to ...
(value_cstring): ... this.
* c-lang.c (evaluate_subexp_c): Update.
* python/python-value.c (builtin_type_pychar): New define.
(convert_value_from_python): Call value_cstring instead
of value_from_string.
* value.c (value_from_string): Remove.
* value.h (value_from_string): Remove.
* eval.c (evaluate_subexp_standard): Pass character type to
value_string. Pass expression architecture to value_nsstring
and lookup_child_selector.
* objc-lang.h (lookup_objc_class): Add GDBARCH parameter.
(lookup_child_selector): Likewise.
(value_nsstring): Likewise.
* objc-lang.c (lookup_objc_class): Add GDBARCH parameter.
Pass character type to value_string..
(lookup_child_selector): Likewise.
(value_nsstring): Add GDBARCH parameter, use it instead of
objfile architecture. Pass architecture to lookup_objc_class
and lookup_child_selector. Pass character type to value_string.
(end_msglist): Pass architecture to lookup_objc_class.
* objc-exp.y: Pass architecture to lookup_objc_class.
Ulrich Weigand [Wed, 17 Jun 2009 18:46:26 +0000 (18:46 +0000)]
* gdbtypes.h (struct language_defn): Add forward declaration.
(lookup_typename): Add LANGUAGE and GDBARCH parameters.
(lookup_unsigned_typename): Likewise.
(lookup_signed_typename): Likewise.
* gdbtypes.c (lookup_typename): Add LANGUAGE and GDBARCH parameters.
Use them instead of current_language and current_gdbarch.
(lookup_unsigned_typename): Add LANGUAGE and GDBARCH parameters.
Pass them to lookup_typename.
(lookup_signed_typename): Likewise.
* c-exp.y: Pass parse_language and parse_gdbarch to
lookup_unsigned_typename and lookup_signed_typename.
* objc-exp.y: Likewise.
* m2-exp.y: Pass parse_language and parse_gdbarch to lookup_typename.
* c-lang.c (evaluate_subexp_c): Pass expression language and
gdbarch to lookup_typename.
* printcmd.c (printf_command): Pass current language and
gdbarch to lookup_typename.
* python/python-type.c (typy_lookup_typename): Likewise.
Include "language.h".
Ulrich Weigand [Wed, 17 Jun 2009 18:45:09 +0000 (18:45 +0000)]
* sparc64-nat.c (sparc64_gregset_supplies_p): Add GDBARCH parameter.
Use it instead of current_gdbarch. Pass architecture to
sparc32_gregset_supplies_p.
(sparc64_fpregset_supplies_p): Add GDBARCH parameter. Use it instead
of current_gdbarch. Pass architecture to sparc32_fpregset_supplies_p.
* sparc64nbsd-nat.c (sparc64nbsd_gregset_supplies_p,
sparc64nbsd_fpregset_supplies_p): Likewise.
* sparc-nat.c (sparc_gregset_supplies_p, sparc_fpregset_supplies_p):
Add GDBARCH parameter.
(sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.
(sparc_fetch_inferior_registers): Pass regcache architecture to
sparc_gregset_supplies_p and sparc_fpregset_supplies_p.
(sparc_store_inferior_registers): Likewise.
* sparc-nat.h (sparc_gregset_supplies_p, sparc_fpregset_supplies_p:
Add GDBARCH parameter.
(sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.
Ulrich Weigand [Wed, 17 Jun 2009 18:44:23 +0000 (18:44 +0000)]
* ada-tasks.c (read_known_tasks_array): Use target_gdbarch instead
of current_gdbarch.
* aix-thread.c (pd_enable): Likewise.
* amd64-linux-nat.c (ps_get_thread_area): Likewise.
* bsd-uthread.c (bsd_uthread_activate): Likewise.
* linux-nat.c (linux_nat_info_proc_cmd): Likewise.
* linux-thread-db.c (enable_thread_event): Likewise.
* monitor.c (monitor_write_memory, monitor_read_memory): Likewise.
* nto-procfs.c (procfs_open): Likewise.
* procfs.c (invalidate_cache, procfs_insert_watchpoint,
info_proc_mappings, info_mappings_callback): Likewise.
* record.c (record_open): Likewise.
* rs6000-nat.c (ARCH64): Likewise.
* solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
(darwin_bfd_open): Likewise.
* memattr.c (mem_info_command): Likewise.
* windows-nat.c (win32_resume): Use current regcache architecture
instead of current_gdbarch.
* dbug-rom.c (dbug_regname): Remove check against number of
registers in current_gdbarch.
* solib-pa64.c (read_dynamic_info): Remove unused variable.
Ulrich Weigand [Wed, 17 Jun 2009 18:43:24 +0000 (18:43 +0000)]
* dummy-frame.c (deprecated_pc_in_call_dummy): Add GDBARCH parameter,
use it instead of current_gdbarch.
* frame.h (deprecated_pc_in_call_dummy): Add GDBARCH parameter.
* arm-tdep.c (arm_skip_prologue): Pass architecture to
deprecated_pc_in_call_dummy.
* symtab.c (skip_prologue_using_sal): Add GDBARCH parameter.
Use it instead of current_gdbarch.
* symtab.h (skip_prologue_using_sal): Add GDBARCH parameter.
* breakpoint.c (expand_line_sal_maybe): Pass architecture to
skip_prologue_using_sal.
* arm-tdep.c (skip_prologue_using_sal): Likewise.
* lm32-tdep.c (lm32_skip_prologue): Likewise.
* m32-tdep.c (m32c_skip_prologue): Likewise.
* mips-tdep.c (mips_skip_prologue): Likewise.
* moxie-tdep.c (moxie_skip_prologue): Likewise.
* mt-tdep.c (mt_frame_unwind_cache): Likewise.
* rs6000-tdep.c (rs6000_skip_prologue): Likewise.
* frv-tdep.c (frv_analyze_prologue): Add GDBARCH parameter, pass
it to skip_prologue_using_sal. Update call sites ...
(frv_skip_prologue, frv_frame_unwind_cache): ... here.
* mn10300-tdep.c (struct mn10300_prologue): Add GDBARCH member.
(check_for_saved): Use it instead of current_gdbarch.
(mn10300_analyze_prologue): Set it.
* value.c (using_struct_return): Add GDBARCH parameter. Use it
instead of current_gdbarch.
* value.h (using_struct_return): Add GDBARCH parameter.
* eval.c (evaluate_subexp_standard): Pass architecture to
using_struct_return.
* infcall.c (call_function_by_hand): Likewise.
* stack.c (return_command): Likewise.
* sparc-tdep.c (sparc32_push_dummy_code): Likewise.
* symtab.c (in_prologue): Add GDBARCH parameter. Use it instead of
current_gdbarch.
* symtab.h (in_prologue): Add GDBARCH parameter.
* infrun.c (handle_inferior_event): Pass architecture to in_prologue.
* eval.c (evaluate_subexp_standard): Use expression architecture
instead of current_gdbarch.
* c-lang.c (evaluate_subexp_c): Use expression architecture and
language instead of current_gdbarch and current_language.
* printcmd.c (do_one_display): Use expression architecture instead
of current_gdbarch.
* infcmd.c (print_return_value): Use architecture of stop_regcache
instead of current_gdbarch.
(print_vector_info, print_float_info): Remove GDBARCH argument,
use frame architecture instead.
(vector_info, float_info): Update calls.
* objc-lang.c (objc_skip_trampoline): Use frame architecture
instead of current_gdbarch.
* parse.c (write_dollar_variable): Use parse architecture instead
of current_gdbarch.
* source.c (line_info): Use objfile architecture instead of
current_gdbarch.
* symtab.c (find_function_start_sal): Use gdbarch instead of
current_gdbarch.
(print_msymbol_info): Use objfile architecture instead of
current_gdbarch.
* valops.c (value_assign): Use frame architecture instead of
current_gdbarch.
Ulrich Weigand [Wed, 17 Jun 2009 18:41:50 +0000 (18:41 +0000)]
* buildsym.c (record_line): Remove call to gdbarch_addr_bits_remove.
* coffread.c (coff_symtab_read): Call gdbarch_addr_bits_remove before
calling record_line.
(enter_linenos): Likewise.
* dbxread.c (process_one_symbol): Likewise.
* dwarf2read.c (dwarf_decode_lines): Likewise.
* mdebugread.c (psymtab_to_symtab_1): Likewise.
* xcoffread.c (enter_line_range): Likewise.
Ulrich Weigand [Wed, 17 Jun 2009 18:40:53 +0000 (18:40 +0000)]
* ax-gdb.c (gen_bitfield_ref): Add EXP argument, use expression
architecture instead of current_gdbarch.
(gen_struct_ref): Add EXP argument, pass to get_bitfield_ref.
(gen_expr): Pass expression to get_struct_ref.
* symtab.h (struct symbol_ops): Add GDBARCH parameter to
tracepoint_var_ref callback.
* ax-gdb.c (gen_var_ref): Pass architecture to tracepoint_var_ref
symbol operation callback.
* dwarf2loc.c (dwarf2_tracepoint_var_ref): Add GDBARCH parameter.
Use it instead of current_gdbarch.
(locexpr_tracepoint_var_ref): Add GDBARCH parameter. Pass it to
dwarf2_tracepoint_var_ref.
(loclist_tracepoint_var_ref): Likewise.
Ulrich Weigand [Wed, 17 Jun 2009 18:39:13 +0000 (18:39 +0000)]
* prologue-value.c (make_pv_area): Add ADDR_BIT argument.
Use it instead of address bits of current_gdbarch.
* prologue-value.c (make_pv_area): Add ADDR_BIT argument.
* arm-tdep.c (thumb_analyze_prologue): Pass address bits to
make_pv_area.
(arm_scan_prologue): Likewise.
* m32c-tdep.c (m32c_analyze_prologue): Likewise.
* mep-tdep.c (mep_analyze_prologue): Likewise.
* mn10300-tdep.c (mn10300_analyze_prologue): Likewise.
* s390-tdep.c (s390_analyze_prologue): Likewise.
Ulrich Weigand [Wed, 17 Jun 2009 18:38:16 +0000 (18:38 +0000)]
ChangeLog:
* mi/mi-main.c (mi_cmd_data_list_register_names): Use selected
frame architecture instead of current_gdbarch.
(mi_cmd_data_list_changed_registers): Likewise.
(mi_cmd_data_list_register_values): Likewise. Pass selected
frame to get_register.
(get_register): Add FRAME argument, use it as frame to retrieve
registers from (instead of selected frame). Use frame architecture
instead of current_gdbarch.
(mi_cmd_data_write_register_values): Use current regcache
architecture instead of current_gdbarch.
testsuite/ChangeLog:
* gdb.mi/gdb680.exp: Update test for error message.
Ulrich Weigand [Wed, 17 Jun 2009 18:36:44 +0000 (18:36 +0000)]
* tui/tui-regs.c (tui_show_register_group): Remove GDBARCH parameter;
use frame architecture instead. Replace current_gdbarch uses.
(tui_show_registers): Update call.
(tui_get_register): Remove GDBARCH parameter; use frame architecture
instead.
(tui_show_register_group): Update call.
(tui_check_register_values): Likewise.
(tui_register_format): Remove GDBARCH parameter; use frame
architecture instead. Replace current_gdbarch uses.
(tui_get_register): Update call.
Ulrich Weigand [Wed, 17 Jun 2009 18:35:33 +0000 (18:35 +0000)]
* gdbarch.sh (construct_inferior_arguments): Remove.
* gdbarch.c, gdbarch.h: Regenerate.
* infcmd.c (get_inferior_args): Call construct_inferior_arguments
directly instead of gdbarch_construct_inferior_arguments.
(construct_inferior_arguments): Remove GDBARCH argument.
* inferior.h (construct_inferior_arguments): Likewise.
Ulrich Weigand [Wed, 17 Jun 2009 18:34:34 +0000 (18:34 +0000)]
* symfile.c (section_is_mapped): Use objfile architecture instead
of current_gdbarch.
(TARGET_LONG_BYTES): Remove.
(read_target_long_array): Add SIZE argument. Use it instead of
TARGET_LONG_BYTES.
(simple_read_overlay_table): Retrieve long size from objfile
architecture; pass it to read_target_long_array.
(simple_read_overlay_region_table): Likewise.
(simple_overlay_update_1): Likewise.
Ulrich Weigand [Wed, 17 Jun 2009 18:33:28 +0000 (18:33 +0000)]
* infrun.c (cleanup_displaced_step_closure): Remove.
(displaced_step_clear_cleanup): Move to before displaced_step_prepare.
(displaced_step_prepare): Use displaced_step_clear_cleanup instead
of cleanup_displaced_step_closure.
(handle_inferior_event, keep_going): Use thread architecture instead
of current_gdbarch.
Ulrich Weigand [Wed, 17 Jun 2009 18:32:40 +0000 (18:32 +0000)]
ChangeLog:
* infrun.c (handle_inferior_event): Use current frame architecture
or thread architecture instead of current_gdbarch. Pass to
handle_step_into_function and handle_step_into_function_backward.
(handle_step_into_function): Add GDBARCH parameter. Use it instead
of current_gdbarch.
(handle_step_into_function_backward): Likewise.
(insert_step_resume_breakpoint_at_frame): Use frame architecture
instead of current_gdbarch.
(insert_step_resume_breakpoint_at_caller): Likewise.
testsuite/ChangeLog:
* gdb.base/annota1.exp: Allow multiple occurrences of the
frames-invalid annotation.
* gdb.cp/annota2.exp: Likewise.
H.J. Lu [Wed, 17 Jun 2009 18:08:35 +0000 (18:08 +0000)]
2009-06-17 H.J. Lu <hongjiu.lu@intel.com>
* elf32-arm.c (create_got_section): Get existing .rela.got
section.
* elf32-hppa.c (elf32_hppa_create_dynamic_sections): Likewise.
* elf32-lm32.c (create_got_section): Likewise.
* elf32-m32r.c (create_got_section): Likewise.
* elf32-ppc.c (ppc_elf_create_got): Likewise.
* elf32-s390.c (create_got_section): Likewise.
* elf32-sh.c (create_got_section): Likewise.
* elf32-xtensa.c (elf_xtensa_create_dynamic_sections): Likewise.
* elf64-s390.c (create_got_section): Likewise.
* elfxx-sparc.c (create_got_section): Likewise.
* elflink.c (_bfd_elf_create_got_section): Properly initialize
the GOT size.
Jeff Johnston [Wed, 17 Jun 2009 16:35:15 +0000 (16:35 +0000)]
2009-06-17 Michael Eager <eager@eagercon.com>
* COPYING.LIBGLOSS: Add Xilinx license.
Phil Blundell [Wed, 17 Jun 2009 15:46:18 +0000 (15:46 +0000)]
Undo accidental checkin of bogus change
Pierre Muller [Wed, 17 Jun 2009 06:17:32 +0000 (06:17 +0000)]
* infcmd.c (post_create_inferior): Call breakpoint_re_set after target
is pushed for watchpoint promotion to hardware watchpoint.
gdbadmin [Wed, 17 Jun 2009 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Wed, 17 Jun 2009 00:00:07 +0000 (00:00 +0000)]
daily update
Paul Pluzhnikov [Tue, 16 Jun 2009 21:06:40 +0000 (21:06 +0000)]
2009-06-16 Paul Pluzhnikov <ppluzhnikov@google.com>
* dwarf2read.c (dwarf_info_section, dwarf_abbrev_section)
(dwarf_line_section, dwarf_pubnames_section, dwarf_aranges_section)
(dwarf_loc_section, dwarf_macinfo_section, dwarf_str_section)
(dwarf_ranges_section, dwarf_frame_section)
(dwarf_eh_frame_section): Removed.
(dwarf2_resize_section): Likewise.
(dwarf2_read_section): Now static, use bfd_mmap() if possible.
(dwarf2_get_section_info): New function.
(munmap_section_buffer): Likewise.
(dwarf2_per_objfile_cleanup): Likewise.
(section_is_p): Signature change.
* dwarf2-frame.c (dwarf2_build_frame_info): Use
dwarf2_get_section_info instead of dwarf2_read_section.
Paul Pluzhnikov [Tue, 16 Jun 2009 18:49:25 +0000 (18:49 +0000)]
2009-06-16 Paul Pluzhnikov <ppluzhnikov@google.com>
* solib.c (symbol_add_stub): New FLAGS parameter.
(solib_read_symbols): FROM_TTY -> FLAGS, call symbol_add_stub
directly.
(solib_add): Defer breakpoint_re_set until after all solibs.
* bsd-uthread.c (bsd_uthread_solib_loaded): Adjust.
* rs6000-nat.c (objfile_symbol_add): Adjust.
* symfile.c (syms_from_objfile): Merge parameters into ADD_FLAGS.
(new_symfile_objfile): Likewise.
(symbol_file_add_with_addrs_or_offsets): Likewise.
(symbol_file_add_from_bfd): Likewise.
(symbol_file_add): Likewise.
* symfile.h (enum symfile_add_flags): New. Adjust prototypes.
* symfile-mem.c (symbol_file_add_from_memory): Adjust.
* windows-nat.c (safe_symbol_file_add_stub): Adjust.
* machoread.c (macho_oso_symfile, macho_symfile_read): Adjust.
Keith Seitz [Tue, 16 Jun 2009 18:39:41 +0000 (18:39 +0000)]
* linespec.c (collect_methods): Delete.
(add_matching_methods): Reove destructor special case.
(find_method): Call find_methods directly instead of
collect_methods.
* valops.c (value_struct_elt): Remove destructor
special cases.
(check_field): Likewise.
(value_struct_elt_for_reference): Likewise.
(destructor_name_p): Remove misleading comment about dtors
being "special cases".
* gdbtypes.h (get_destructor_fn_field): Remove. No longer needed.
* gdbtypes.c (get_destructor_fn_field): Likewise.
Pedro Alves [Tue, 16 Jun 2009 18:23:36 +0000 (18:23 +0000)]
* mi/mi-main.c (mi_cmd_data_read_memory): Dispatch
TARGET_OJECT_MEMORY reads to the topmost target, not the the
flattened current_target.
H.J. Lu [Tue, 16 Jun 2009 17:45:08 +0000 (17:45 +0000)]
2009-06-16 H.J. Lu <hongjiu.lu@intel.com>
* elf-bfd.h (ELF_LOCAL_SYMBOL_HASH): New.
* elf32-i386.c (elf_i386_local_hash): Removed.
(elf_i386_local_htab_hash): Use ELF_LOCAL_SYMBOL_HASH.
(elf_i386_get_local_sym_hash): Likewise.
* elf64-x86-64.c (elf64_x86_64_local_hash): Removed.
(elf64_x86_64_local_htab_hash): Use ELF_LOCAL_SYMBOL_HASH.
(elf64_x86_64_get_local_sym_hash): Likewise.
* elfxx-ia64.c (elfNN_ia64_local_htab_hash): Likewise.
(get_local_sym_hash): Likewise.
H.J. Lu [Tue, 16 Jun 2009 15:52:41 +0000 (15:52 +0000)]
2009-06-16 H.J. Lu <hongjiu.lu@intel.com>
* elfxx-ia64.c (elfNN_ia64_link_hash_table): Remove got_sec,
rel_got_sec and plt_sec.
(elfNN_ia64_relax_section): Updated.
(elfNN_ia64_create_dynamic_sections): Likewise.
(get_got): Likewise.
(allocate_dynrel_entries): Likewise.
(elfNN_ia64_size_dynamic_sections): Likewise.
(set_got_entry): Likewise.
(elfNN_ia64_choose_gp): Likewise.
(elfNN_ia64_relocate_section): Likewise.
(elfNN_ia64_finish_dynamic_symbol): Likewise.
(elfNN_ia64_finish_dynamic_sections): Likewise.
Ulrich Weigand [Tue, 16 Jun 2009 13:44:00 +0000 (13:44 +0000)]
* elf32-spu.c (needs_ovl_stub): Respect .brinfo lrlive bits
also for calls.
H.J. Lu [Tue, 16 Jun 2009 13:41:10 +0000 (13:41 +0000)]
2009-06-16 H.J. Lu <hongjiu.lu@intel.com>
* configure.in (elf): Add elf-ifunc.lo.
* configure: Regenerated.
* Makefile.in: Likewise.
* elf-bfd.h (elf_link_hash_table): Add sgot, sgotplt,
srelgot, splt, srelplt, igotplt, iplt, irelplt and irelifunc.
* elf32-i386.c (elf_i386_link_hash_table): Remove sgot,
sgotplt, srelgot, splt, srelplt, igotplt, iplt, irelplt and
irelifunc.
(elf_i386_link_hash_table_create): Likewise.
(elf_i386_create_dynamic_sections): Likewise.
(elf_i386_check_relocs): Likewise.
(elf_i386_allocate_dynrelocs): Likewise.
(elf_i386_size_dynamic_sections): Likewise.
(elf_i386_relocate_section): Likewise.
(elf_i386_finish_dynamic_symbol): Likewise.
(elf_i386_finish_dynamic_sections): Likewise.
(elf_i386_create_got_section): Removed.
* elf64-x86-64.c (elf64_x86_64_link_hash_table): Remove sgot,
sgotplt, srelgot, splt, srelplt, igotplt, iplt, irelplt and
irelifunc.
(elf64_x86_64_compute_jump_table_size): Updated.
(elf64_x86_64_link_hash_table_create): Likewise.
(elf64_x86_64_create_dynamic_sections): Likewise.
(elf64_x86_64_check_relocs): Likewise.
(elf64_x86_64_allocate_dynrelocs): Likewise.
(elf64_x86_64_size_dynamic_sections): Likewise.
(elf64_x86_64_relocate_section): Likewise.
(elf64_x86_64_finish_dynamic_symbol): Likewise.
(elf64_x86_64_finish_dynamic_sections): Likewise.
(elf64_x86_64_create_got_section): Removed.
* elflink.c (_bfd_elf_create_got_section): Use log_file_align
for pointer alignment. Set up section pointers.
(_bfd_elf_create_dynamic_sections): Likewise.
(_bfd_elf_create_ifunc_sections): Moved to ...
* elf-ifunc.c: Here. New.
* Makefile.am (BFD32_BACKENDS): Add elf-ifunc.lo.
(BFD32_BACKENDS_CFILES): Add elf-ifunc.c.
Run "make dep-am".
DJ Delorie [Tue, 16 Jun 2009 13:21:26 +0000 (13:21 +0000)]
merge from gcc
Nick Clifton [Tue, 16 Jun 2009 12:44:35 +0000 (12:44 +0000)]
PR 10197
* testsuite/test-demangle.c: Rename getline to get_line to avoid
conflicts with system function of the same name.
Nick Clifton [Tue, 16 Jun 2009 11:49:12 +0000 (11:49 +0000)]
* corefile.c (cmp_symbol_map): New function.
(read_function_mappins): Use qsort to sort the symbols.
(search_mapped_symbol): New function.
(core_create_function_syms): Use bsearch to find symbols.
* corefile.h (struct function_map): Add new bit-field: is_first.
* cg_print.c (cmp_symbol_map): New function.
(cg_print_file_ordering): Sort the symbol map.
Nick Clifton [Tue, 16 Jun 2009 11:33:42 +0000 (11:33 +0000)]
* elf32-arm.c (cortex_a8_erratum_scan): Change type of offset
to bfd_signed_vma. Cast constant operands which are used in
offset related expressions to bfd_signed_vma type as appropriate.
Tristan Gingold [Tue, 16 Jun 2009 09:21:36 +0000 (09:21 +0000)]
2009-06-16 Tristan Gingold <gingold@adacore.com>
* avr-tdep.c (struct gdbarch_tdep): Replace the unused field with
call_length field.
(avr_register_name): Add const to register_names.
(avr_scan_arg_moves): Move inside avr_scan_prologue.
(avr_scan_prologue): Add pc_end argument.
Only read prologue bytes that can be read.
Limit the scan to the known prologue length.
Makes pattern variables static and const.
Fix indentation.
(avr_skip_prologue): Pass func_end argument to avr_scan_prologue.
Fix indentation.
(avr_breakpoint_from_pc): Constify avr_break_insn.
(avr_extract_return_value): Fix function comment.
(avr_frame_unwind_cache): Fix GNU style violations.
Pass current_pc argument to avr_scan_prologue to stop prologue
analysis to the current pc. This fixes the bug with the 'next'
command.
Correctly set the SP register of the previous frame (use call_length).
(avr_frame_prev_register): Fix indentation.
Correctly read PC from the stack on avr6 architectures.
(avr_push_dummy_call): Fix indentation.
(avr_gdbarch_init): Set call_length according to the architecture.
Maciej W. Rozycki [Tue, 16 Jun 2009 02:23:09 +0000 (02:23 +0000)]
bfd/
* elf32-vax.c (elf_vax_plt_sym_val): New function.
(elf_backend_plt_sym_val): Define.
opcodes/
* vax-dis.c (is_function_entry): Return success for synthetic
symbols too.
(is_plt_tail): New function.
(print_insn_vax): Decode PLT entry offset longword.
Maciej W. Rozycki [Tue, 16 Jun 2009 02:16:54 +0000 (02:16 +0000)]
bfd/
* elf32-vax.c (elf_vax_reloc_type_class): New function.
(elf_backend_reloc_type_class): Define.
Maciej W. Rozycki [Tue, 16 Jun 2009 02:14:12 +0000 (02:14 +0000)]
bfd/
* elf32-vax.c (elf_vax_relocate_section): For symbol references
from an executable to a shared library treat R_VAX_PC32
relocations as R_VAX_PLT32 ones.
Maciej W. Rozycki [Tue, 16 Jun 2009 02:07:22 +0000 (02:07 +0000)]
bfd/
* elf32-vax.c (elf_vax_instantiate_got_entries): Skip local
symbols in GOT space calculation.
(elf_vax_relocate_section): Adjust accordingly.
Maciej W. Rozycki [Tue, 16 Jun 2009 01:57:39 +0000 (01:57 +0000)]
bfd/
* elf32-vax.c (elf_vax_plt_entry): Set the entry mask to
include <R11:R2>.
Maciej W. Rozycki [Tue, 16 Jun 2009 01:52:13 +0000 (01:52 +0000)]
bfd/
* elf32-vax.c (elf_vax_check_relocs): Handle the visibility
attribute.
(elf_vax_relocate_section): Likewise.
gas/
* config/tc-vax.c (md_estimate_size_before_relax): Accept
indirect symbol references in the PIC mode and emit a
PC-relative relocation instead of a GOT/PLT one. Likewise
for symbols known to be hidden at this point.
Alan Modra [Tue, 16 Jun 2009 00:00:36 +0000 (00:00 +0000)]
daily update
gdbadmin [Tue, 16 Jun 2009 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
H.J. Lu [Mon, 15 Jun 2009 18:25:20 +0000 (18:25 +0000)]
2009-06-15 H.J. Lu <hongjiu.lu@intel.com>
* elf32-i386.c (elf_i386_allocate_dynrelocs): Update comments.
* elf64-x86-64.c (elf64_x86_64_allocate_dynrelocs): Likewise.
H.J. Lu [Mon, 15 Jun 2009 17:23:43 +0000 (17:23 +0000)]
2009-06-15 H.J. Lu <hongjiu.lu@intel.com>
* elf32-i386.c (elf_i386_check_relocs): Reformat.
* elf64-x86-64.c (elf64_x86_64_check_relocs): Likewise.
Nick Clifton [Mon, 15 Jun 2009 15:42:36 +0000 (15:42 +0000)]
PR 10186
* arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
instruction.
* gas/arm/thumb32.d: Fix expected binary value of SEV.W instruction.
* config/tc-arm.c (T16_32_TAB): Fix binary value of SEV.W
instruction.
Nick Clifton [Mon, 15 Jun 2009 15:24:52 +0000 (15:24 +0000)]
PR 10173
* cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
H.J. Lu [Mon, 15 Jun 2009 14:36:33 +0000 (14:36 +0000)]
2009-06-15 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am: Run "make dep-am".
* Makefile.in: Regenerated.
Nick Clifton [Mon, 15 Jun 2009 14:08:41 +0000 (14:08 +0000)]
* configure.ac: Define is_elf for QNX Neutrino targets.
* configure: Regenerate.
H.J. Lu [Mon, 15 Jun 2009 13:28:56 +0000 (13:28 +0000)]
2009-06-15 H.J. Lu <hongjiu.lu@intel.com>
* ld-ifunc/ifunc-9-x86.d: Fix a typo.
H.J. Lu [Mon, 15 Jun 2009 13:12:33 +0000 (13:12 +0000)]
2009-06-15 H.J. Lu <hongjiu.lu@intel.com>
* elf32-i386.c (elf_i386_allocate_dynrelocs): Fix a typo.
* elf64-x86-64.c (elf64_x86_64_allocate_dynrelocs): Likewise.
Phil Muldoon [Mon, 15 Jun 2009 12:11:37 +0000 (12:11 +0000)]
2009-06-15 Phil Muldoon <pmuldoon@redhat.com>
* infcall.c (show_unwind_on_terminating_exception_p): New
function.
(call_function_by_hand): Create breakpoint and clean-up call for
std::terminate.breakpoint. Add unwind_on_terminating_exception_p
gate. Pop frame on breakpoint hit.
(_initialize_infcall): Add add_setshow_boolean_cmd for
unwind-on-terminating-exception.
testsuite/
2009-06-15 Phil Muldoon <pmuldoon@redhat.com>
* gdb.cp/gdb2495.cc: New file.
* gdb.cp/gdb2495.exp: New file.
doc/
2009-06-15 Phil Muldoon <pmuldoon@redhat.com>
* doc/gdb.texinfo (Calling): Document
set-unwind-on-terminating-exception usage.
Nick Clifton [Mon, 15 Jun 2009 11:37:26 +0000 (11:37 +0000)]
PR 10263
* arm-dis.c (print_insn): Ignore is_data if the user has requested
the disassembly of data as well as instructions.
* objdump.c (disassemble_bytes): Set the DISASSEMBLE_DATA bit in
the flags field of the disassemble_info structure if the -D switch
is in operation.
* dis-asm.h (struct disassemble_info): New value for the flags
field.
Nick Clifton [Mon, 15 Jun 2009 08:52:20 +0000 (08:52 +0000)]
* po/ru.po: New Russian translation.
* configure.in (ALL_LINGUAS): Add ru.
* configure: Regenerate.
Nick Clifton [Mon, 15 Jun 2009 08:48:49 +0000 (08:48 +0000)]
* corefile.c (core_create_syms_from): Use BFD_VMA_FMT when
scanning in an address.
H.J. Lu [Mon, 15 Jun 2009 00:37:08 +0000 (00:37 +0000)]
2009-06-14 H.J. Lu <hongjiu.lu@intel.com>
* elf32-i386.c: Remove duplicated comments.
gdbadmin [Mon, 15 Jun 2009 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Mon, 15 Jun 2009 00:00:04 +0000 (00:00 +0000)]
daily update
H.J. Lu [Sun, 14 Jun 2009 22:13:30 +0000 (22:13 +0000)]
bfd/
2009-06-14 H.J. Lu <hongjiu.lu@intel.com>
PR ld/10270
* elf32-i386.c (elf_i386_allocate_dynrelocs): Disallow
dynamic IFUNC pointer in non-shared object. Use .got.plt
for IFUNC definition in PIE.
(elf_i386_allocate_dynrelocs): Resolve IFUNC definition in
PIE locally.
* elf64-x86-64.c (elf64_x86_64_allocate_dynrelocs): Disallow
dynamic IFUNC pointer in non-shared object. Use .got.plt
for IFUNC definition in PIE.
(elf64_x86_64_relocate_section): Resolve IFUNC definition in
PIE locally.
ld/testsuite/
2009-06-14 H.J. Lu <hongjiu.lu@intel.com>
PR ld/10270
* ld-ifunc/ifunc-9-x86.d: New.
* ld-ifunc/ifunc-9-x86.s: Likewise.
Doug Evans [Sun, 14 Jun 2009 16:36:56 +0000 (16:36 +0000)]
* cgen.sh: Handle multiple simultaneous runs for parallel makes.
projects / external / binutils.git / log