Xiongfeng Wang [Thu, 19 Nov 2020 12:49:18 +0000 (20:49 +0800)]
misc: pci_endpoint_test: fix return value of error branch
[ Upstream commit
1749c90489f2afa6b59dbf3ab59d58a9014c84a1 ]
We return 'err' in the error branch, but this variable may be set as
zero before. Fix it by setting 'err' as a negative value before we
goto the error label.
Fixes:
e03327122e2c ("pci_endpoint_test: Add 2 ioctl commands")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/1605790158-6780-1-git-send-email-wangxiongfeng2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stephen Boyd [Fri, 4 Dec 2020 19:35:38 +0000 (11:35 -0800)]
platform/chrome: cros_ec_spi: Don't overwrite spi::mode
[ Upstream commit
74639cbf51d7c0304342544a83dfda354a6bd208 ]
There isn't any need to overwrite the mode here in the driver with what
has been detected by the firmware, such as DT or ACPI. In fact, if we
use the SPI CS gpio descriptor feature we will overwrite the mode with
SPI_MODE_0 where it already contains SPI_MODE_0 and more importantly
SPI_CS_HIGH. Clearing the SPI_CS_HIGH bit causes the CS line to toggle
when the device is probed when it shouldn't change, confusing the driver
and making it fail to probe. Drop the assignment and let the spi core
take care of it.
Fixes:
a17d94f0b6e1 ("mfd: Add ChromeOS EC SPI driver")
Cc: Simon Glass <sjg@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Alexandru M Stan <amstan@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20201204193540.3047030-2-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Quinn Tran [Wed, 2 Dec 2020 13:23:06 +0000 (05:23 -0800)]
scsi: qla2xxx: Fix N2N and NVMe connect retry failure
[ Upstream commit
07a5f69248e3486e387c40af64793466371c7d91 ]
FC-NVMe target discovery failed when initiator wwpn < target wwpn in an N2N
(Direct Attach) config, where the driver was stuck on FCP PRLI mode and
failed to retry with NVMe PRLI.
Link: https://lore.kernel.org/r/20201202132312.19966-10-njavali@marvell.com
Fixes:
84ed362ac40c ("scsi: qla2xxx: Dual FCP-NVMe target port support”)
Fixes:
983f127603fa ("scsi: qla2xxx: Retry PLOGI on FC-NVMe PRLI failure”)
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arun Easi [Wed, 2 Dec 2020 13:23:05 +0000 (05:23 -0800)]
scsi: qla2xxx: Fix FW initialization error on big endian machines
[ Upstream commit
8a78dd6ed1af06bfa7b4ade81328ff7ea11b6947 ]
Some fields are not correctly byte swapped causing failure during
initialization. As probe() returns failure, HBAs will not be claimed when
this happens.
qla2xxx [0007:01:00.0]-ffff:3: Secure Flash Update in FW: Supported
qla2xxx [0007:01:00.0]-ffff:3: SCM in FW: Supported
qla2xxx [0007:01:00.0]-00d2:3: Init Firmware **** FAILED ****.
qla2xxx [0007:01:00.0]-00d6:3: Failed to initialize adapter - Adapter flags 2.
qla2xxx 0007:01:00.1: enabling device (0140 -> 0142)
qla2xxx [0007:01:00.1]-011c: : MSI-X vector count: 128.
qla2xxx [0007:01:00.1]-001d: : Found an ISP2289 irq 18 iobase 0xd000080080004000.
qla2xxx 0007:01:00.1: Using 64-bit direct DMA at offset
800000000000000
BUG: Bad page state in process insmod pfn:67118 page:
f00000000168bd40
count:-1 mapcount:0 mapping: (null) index:0x0
page flags: 0x3ffff800000000() page dumped because: nonzero _count
Modules linked in: qla2xxx(OE+) nvme_fc nvme_fabrics
nvme_core scsi_transport_fc scsi_tgt nls_utf8 isofs ip6t_rpfilter
ipt_REJECT nf_reject_ipv4 ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set
nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat
nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle
ip6table_security ip6table_raw iptable_nat nf_conntrack_ipv4
nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle
iptable_security iptable_raw ebtable_filter ebtables ip6table_filter
ip6_tables iptable_filter nx_crypto ses enclosure scsi_transport_sas
pseries_rng sg ip_tables xfs libcrc32c sr_mod cdrom sd_mod crc_t10dif
crct10dif_generic crct10dif_common usb_storage ipr libata tg3 ptp
pps_core dm_mirror dm_region_hash dm_log dm_mod
CPU: 32 PID: 8560 Comm: insmod Kdump: loaded Tainted: G
OE ------------ 3.10.0-957.el7.ppc64 #1
Call Trace:
[
c0000006dd7caa70] [
c00000000001cca8] .show_stack+0x88/0x330 (unreliable)
[
c0000006dd7cab30] [
c000000000ac3d88] .dump_stack+0x28/0x3c
[
c0000006dd7caba0] [
c00000000029e48c] .bad_page+0x15c/0x1c0
[
c0000006dd7cac40] [
c00000000029f938] .get_page_from_freelist+0x11e8/0x1ea0
[
c0000006dd7caf40] [
c0000000002a1d30] .__alloc_pages_nodemask+0x1c0/0xc70
[
c0000006dd7cb140] [
c00000000002ba0c] .__dma_direct_alloc_coherent+0x8c/0x170
[
c0000006dd7cb1e0] [
d000000010a94688] .qla2x00_mem_alloc+0x10f8/0x1370 [qla2xxx]
[
c0000006dd7cb2d0] [
d000000010a9c790] .qla2x00_probe_one+0xb60/0x22e0 [qla2xxx]
[
c0000006dd7cb540] [
c0000000005de764] .pci_device_probe+0x204/0x300
[
c0000006dd7cb600] [
c0000000006ca61c] .driver_probe_device+0x2cc/0x6f0
[
c0000006dd7cb6b0] [
c0000000006cabec] .__driver_attach+0x10c/0x110
[
c0000006dd7cb740] [
c0000000006c5f04] .bus_for_each_dev+0x94/0x100
[
c0000006dd7cb7e0] [
c0000000006c94f4] .driver_attach+0x34/0x50
[
c0000006dd7cb860] [
c0000000006c8f58] .bus_add_driver+0x298/0x3b0
[
c0000006dd7cb900] [
c0000000006cb6e0] .driver_register+0xb0/0x1a0
[
c0000006dd7cb980] [
c0000000005dc474] .__pci_register_driver+0xc4/0xf0
[
c0000006dd7cba10] [
d000000010b94e20] .qla2x00_module_init+0x2a8/0x328 [qla2xxx]
[
c0000006dd7cbaa0] [
c00000000000c130] .do_one_initcall+0x130/0x2e0
[
c0000006dd7cbb50] [
c0000000001b2e8c] .load_module+0x1afc/0x2340
[
c0000006dd7cbd40] [
c0000000001b3920] .SyS_finit_module+0xd0/0x130
[
c0000006dd7cbe30] [
c00000000000a284] system_call+0x38/0xfc
Link: https://lore.kernel.org/r/20201202132312.19966-9-njavali@marvell.com
Fixes:
9f2475fe7406 ("scsi: qla2xxx: SAN congestion management implementation")
Fixes:
cf3c54fb49a4 ("scsi: qla2xxx: Add SLER and PI control support”)
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masami Hiramatsu [Wed, 28 Oct 2020 14:31:10 +0000 (23:31 +0900)]
x86/kprobes: Restore BTF if the single-stepping is cancelled
[ Upstream commit
78ff2733ff352175eb7f4418a34654346e1b6cd2 ]
Fix to restore BTF if single-stepping causes a page fault and
it is cancelled.
Usually the BTF flag was restored when the single stepping is done
(in resume_execution()). However, if a page fault happens on the
single stepping instruction, the fault handler is invoked and
the single stepping is cancelled. Thus, the BTF flag is not
restored.
Fixes:
1ecc798c6764 ("x86: debugctlmsr kprobes")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/160389546985.106936.12727996109376240993.stgit@devnote2
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cheng Lin [Tue, 1 Dec 2020 12:06:35 +0000 (07:06 -0500)]
nfs_common: need lock during iterate through the list
[ Upstream commit
4a9d81caf841cd2c0ae36abec9c2963bf21d0284 ]
If the elem is deleted during be iterated on it, the iteration
process will fall into an endless loop.
kernel: NMI watchdog: BUG: soft lockup - CPU#4 stuck for 22s! [nfsd:17137]
PID: 17137 TASK:
ffff8818d93c0000 CPU: 4 COMMAND: "nfsd"
[exception RIP: __state_in_grace+76]
RIP:
ffffffffc00e817c RSP:
ffff8818d3aefc98 RFLAGS:
00000246
RAX:
ffff881dc0c38298 RBX:
ffffffff81b03580 RCX:
ffff881dc02c9f50
RDX:
ffff881e3fce8500 RSI:
0000000000000001 RDI:
ffffffff81b03580
RBP:
ffff8818d3aefca0 R8:
0000000000000020 R9:
ffff8818d3aefd40
R10:
ffff88017fc03800 R11:
ffff8818e83933c0 R12:
ffff8818d3aefd40
R13:
0000000000000000 R14:
ffff8818e8391068 R15:
ffff8818fa6e4000
CS: 0010 SS: 0018
#0 [
ffff8818d3aefc98] opens_in_grace at
ffffffffc00e81e3 [grace]
#1 [
ffff8818d3aefca8] nfs4_preprocess_stateid_op at
ffffffffc02a3e6c [nfsd]
#2 [
ffff8818d3aefd18] nfsd4_write at
ffffffffc028ed5b [nfsd]
#3 [
ffff8818d3aefd80] nfsd4_proc_compound at
ffffffffc0290a0d [nfsd]
#4 [
ffff8818d3aefdd0] nfsd_dispatch at
ffffffffc027b800 [nfsd]
#5 [
ffff8818d3aefe08] svc_process_common at
ffffffffc02017f3 [sunrpc]
#6 [
ffff8818d3aefe70] svc_process at
ffffffffc0201ce3 [sunrpc]
#7 [
ffff8818d3aefe98] nfsd at
ffffffffc027b117 [nfsd]
#8 [
ffff8818d3aefec8] kthread at
ffffffff810b88c1
#9 [
ffff8818d3aeff50] ret_from_fork at
ffffffff816d1607
The troublemake elem:
crash> lock_manager
ffff881dc0c38298
struct lock_manager {
list = {
next = 0xffff881dc0c38298,
prev = 0xffff881dc0c38298
},
block_opens = false
}
Fixes:
c87fb4a378f9 ("lockd: NLM grace period shouldn't block NFSv4 opens")
Signed-off-by: Cheng Lin <cheng.lin130@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dai Ngo [Mon, 30 Nov 2020 21:24:49 +0000 (16:24 -0500)]
NFSD: Fix 5 seconds delay when doing inter server copy
[ Upstream commit
ca9364dde50daba93eff711b4b945fd08beafcc2 ]
Since commit
b4868b44c5628 ("NFSv4: Wait for stateid updates after
CLOSE/OPEN_DOWNGRADE"), every inter server copy operation suffers 5
seconds delay regardless of the size of the copy. The delay is from
nfs_set_open_stateid_locked when the check by nfs_stateid_is_sequential
fails because the seqid in both nfs4_state and nfs4_stateid are 0.
Fix by modifying nfs4_init_cp_state to return the stateid with seqid 1
instead of 0. This is also to conform with section 4.8 of RFC 7862.
Here is the relevant paragraph from section 4.8 of RFC 7862:
A copy offload stateid's seqid MUST NOT be zero. In the context of a
copy offload operation, it is inappropriate to indicate "the most
recent copy offload operation" using a stateid with a seqid of zero
(see Section 8.2.2 of [RFC5661]). It is inappropriate because the
stateid refers to internal state in the server and there may be
several asynchronous COPY operations being performed in parallel on
the same file by the server. Therefore, a copy offload stateid with
a seqid of zero MUST be considered invalid.
Fixes:
ce0887ac96d3 ("NFSD add nfs4 inter ssc to nfsd4_copy")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
kazuo ito [Fri, 27 Nov 2020 06:26:59 +0000 (15:26 +0900)]
nfsd: Fix message level for normal termination
[ Upstream commit
4420440c57892779f265108f46f83832a88ca795 ]
The warning message from nfsd terminating normally
can confuse system adminstrators or monitoring software.
Though it's not exactly fair to pin-point a commit where it
originated, the current form in the current place started
to appear in:
Fixes:
e096bbc6488d ("knfsd: remove special handling for SIGHUP")
Signed-off-by: kazuo ito <kzpn200@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Tue, 17 Nov 2020 01:22:29 +0000 (09:22 +0800)]
speakup: fix uninitialized flush_lock
[ Upstream commit
d1b928ee1cfa965a3327bbaa59bfa005d97fa0fe ]
The flush_lock is uninitialized, use DEFINE_SPINLOCK
to define and initialize flush_lock.
Fixes:
c6e3fd22cd53 ("Staging: add speakup to the staging directory")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20201117012229.3395186-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Qilong [Mon, 23 Nov 2020 14:58:09 +0000 (22:58 +0800)]
usb: oxu210hp-hcd: Fix memory leak in oxu_create
[ Upstream commit
e5548b05631ec3e6bfdaef1cad28c799545b791b ]
usb_create_hcd will alloc memory for hcd, and we should
call usb_put_hcd to free it when adding fails to prevent
memory leak.
Fixes:
b92a78e582b1a ("usb host: Oxford OXU210HP HCD driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201123145809.1456541-1-zhangqilong3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Qilong [Mon, 23 Nov 2020 14:57:19 +0000 (22:57 +0800)]
usb: ehci-omap: Fix PM disable depth umbalance in ehci_hcd_omap_probe
[ Upstream commit
d6ff32478d7e95d6ca199b5c852710d6964d5811 ]
The pm_runtime_enable will decrement the power disable depth. Imbalance
depth will resulted in enabling runtime PM of device fails later. Thus
a pairing decrement must be needed on the error handling path to keep it
balanced.
Fixes:
6c984b066d84b ("ARM: OMAP: USBHOST: Replace usbhs core driver APIs by Runtime pm APIs")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201123145719.1455849-1-zhangqilong3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe Leroy [Wed, 9 Dec 2020 05:29:21 +0000 (05:29 +0000)]
powerpc/mm: sanity_check_fault() should work for all, not only BOOK3S
[ Upstream commit
7ceb40027e19567a0a066e3b380cc034cdd9a124 ]
The verification and message introduced by commit
374f3f5979f9
("powerpc/mm/hash: Handle user access of kernel address gracefully")
applies to all platforms, it should not be limited to BOOK3S.
Make the BOOK3S version of sanity_check_fault() the one for all,
and bail out earlier if not BOOK3S.
Fixes:
374f3f5979f9 ("powerpc/mm/hash: Handle user access of kernel address gracefully")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/fe199d5af3578d3bf80035d203a94d742a7a28af.1607491748.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Wed, 9 Dec 2020 06:54:51 +0000 (09:54 +0300)]
ASoC: max98390: Fix error codes in max98390_dsm_init()
[ Upstream commit
3cea33b6f2d7782d1be17c71509986f33ee93541 ]
These error paths return success but they should return -EINVAL.
Fixes:
97ed3e509ee6 ("ASoC: max98390: Fix potential crash during param fw loading")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X9B0uz4svyNTqeMb@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Tue, 8 Dec 2020 18:26:50 +0000 (11:26 -0700)]
coresight: remove broken __exit annotations
[ Upstream commit
45fe7befe0db5e61cd3c846315f0ac48541e8445 ]
Functions that are annotated __exit are discarded for built-in drivers,
but the .remove callback in a device driver must still be kept around
to allow bind/unbind operations.
There is now a linker warning for the discarded symbol references:
`tmc_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-tmc-core.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-tmc-core.o
`tpiu_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-tpiu.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-tpiu.o
`etb_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-etb10.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-etb10.o
`static_funnel_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-funnel.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-funnel.o
`dynamic_funnel_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-funnel.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-funnel.o
`static_replicator_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-replicator.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-replicator.o
`dynamic_replicator_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-replicator.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-replicator.o
`catu_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-catu.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-catu.o
Remove all those annotations.
Fixes:
8b0cf82677d1 ("coresight: stm: Allow to build coresight-stm as a module")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201208182651.1597945-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chuhong Yuan [Fri, 4 Dec 2020 06:36:10 +0000 (14:36 +0800)]
ASoC: amd: change clk_get() to devm_clk_get() and add missed checks
[ Upstream commit
95d3befbc5e1ee39fc8a78713924cf7ed2b3cabe ]
cz_da7219_init() does not check the return values of clk_get(),
while da7219_clk_enable() calls clk_set_rate() to dereference
the pointers.
Add checks to fix the problems.
Also, change clk_get() to devm_clk_get() to avoid data leak after
failures.
Fixes:
bb24a31ed584 ("ASoC: AMD: Configure wclk and bclk of master codec")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20201204063610.513556-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Colin Ian King [Mon, 7 Dec 2020 15:09:37 +0000 (15:09 +0000)]
drm/mediatek: avoid dereferencing a null hdmi_phy on an error message
[ Upstream commit
b097efba9580d1f7cbc80cda84e768983e3de541 ]
Currently there is a null pointer check for hdmi_phy that implies it
may be null, however a dev_err messages dereferences this potential null
pointer. Avoid a null pointer dereference by only emitting the dev_err
message if hdmi_phy is non-null. It is a moot point if the error message
needs to be printed at all, but since this is a relatively new piece of
code it may be useful to keep the message in for the moment in case there
are unforseen errors that need to be reported.
Fixes:
be28b6507c46 ("drm/mediatek: separate hdmi phy to different file")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Dereference after null check")
Link: https://lore.kernel.org/r/20201207150937.170435-1-colin.king@canonical.com
[vkoul: fix indent of return call]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe Leroy [Tue, 8 Dec 2020 05:24:19 +0000 (05:24 +0000)]
powerpc/powermac: Fix low_sleep_handler with CONFIG_VMAP_STACK
[ Upstream commit
db972a3787d12b1ce9ba7a31ec376d8a79e04c47 ]
low_sleep_handler() can't restore the context from standard
stack because the stack can hardly be accessed with MMU OFF.
Store everything in a global storage area instead of storing
a pointer to the stack in that global storage area.
To avoid a complete churn of the function, still use r1 as
the pointer to the storage area during restore.
Fixes:
cd08f109e262 ("powerpc/32s: Enable CONFIG_VMAP_STACK")
Reported-by: Giuseppe Sacco <giuseppe@sguazz.it>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Giuseppe Sacco <giuseppe@sguazz.it>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e3e0d8042a3ba75cb4a9546c19c408b5b5b28994.1607404931.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Lynch [Mon, 7 Dec 2020 21:51:56 +0000 (15:51 -0600)]
powerpc/pseries/hibernation: remove redundant cacheinfo update
[ Upstream commit
b866459489fe8ef0e92cde3cbd6bbb1af6c4e99b ]
Partitions with cache nodes in the device tree can encounter the
following warning on resume:
CPU 0 already accounted in PowerPC,POWER9@0(Data)
WARNING: CPU: 0 PID: 3177 at arch/powerpc/kernel/cacheinfo.c:197 cacheinfo_cpu_online+0x640/0x820
These calls to cacheinfo_cpu_offline/online have been redundant since
commit
e610a466d16a ("powerpc/pseries/mobility: rebuild cacheinfo
hierarchy post-migration").
Fixes:
e610a466d16a ("powerpc/pseries/mobility: rebuild cacheinfo hierarchy post-migration")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-25-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Lynch [Mon, 7 Dec 2020 21:51:49 +0000 (15:51 -0600)]
powerpc/pseries/hibernation: drop pseries_suspend_begin() from suspend ops
[ Upstream commit
52719fce3f4c7a8ac9eaa191e8d75a697f9fbcbc ]
There are three ways pseries_suspend_begin() can be reached:
1. When "mem" is written to /sys/power/state:
kobj_attr_store()
-> state_store()
-> pm_suspend()
-> suspend_devices_and_enter()
-> pseries_suspend_begin()
This never works because there is no way to supply a valid stream id
using this interface, and H_VASI_STATE is called with a stream id of
zero. So this call path is useless at best.
2. When a stream id is written to /sys/devices/system/power/hibernate.
pseries_suspend_begin() is polled directly from store_hibernate()
until the stream is in the "Suspending" state (i.e. the platform is
ready for the OS to suspend execution):
dev_attr_store()
-> store_hibernate()
-> pseries_suspend_begin()
3. When a stream id is written to /sys/devices/system/power/hibernate
(continued). After #2, pseries_suspend_begin() is called once again
from the pm core:
dev_attr_store()
-> store_hibernate()
-> pm_suspend()
-> suspend_devices_and_enter()
-> pseries_suspend_begin()
This is redundant because the VASI suspend state is already known to
be Suspending.
The begin() callback of platform_suspend_ops is optional, so we can
simply remove that assignment with no loss of function.
Fixes:
32d8ad4e621d ("powerpc/pseries: Partition hibernation support")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-18-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ard Biesheuvel [Thu, 19 Nov 2020 17:09:16 +0000 (18:09 +0100)]
ARM: 9030/1: entry: omit FP emulation for UND exceptions taken in kernel mode
[ Upstream commit
f77ac2e378be9dd61eb88728f0840642f045d9d1 ]
There are a couple of problems with the exception entry code that deals
with FP exceptions (which are reported as UND exceptions) when building
the kernel in Thumb2 mode:
- the conditional branch to vfp_kmode_exception in vfp_support_entry()
may be out of range for its target, depending on how the linker decides
to arrange the sections;
- when the UND exception is taken in kernel mode, the emulation handling
logic is entered via the 'call_fpe' label, which means we end up using
the wrong value/mask pairs to match and detect the NEON opcodes.
Since UND exceptions in kernel mode are unlikely to occur on a hot path
(as opposed to the user mode version which is invoked for VFP support
code and lazy restore), we can use the existing undef hook machinery for
any kernel mode instruction emulation that is needed, including calling
the existing vfp_kmode_exception() routine for unexpected cases. So drop
the call to call_fpe, and instead, install an undef hook that will get
called for NEON and VFP instructions that trigger an UND exception in
kernel mode.
While at it, make sure that the PC correction is accurate for the
execution mode where the exception was taken, by checking the PSR
Thumb bit.
Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Fixes:
eff8728fe698 ("vmlinux.lds.h: Add PGO and AutoFDO input sections")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vadim Pasternak [Mon, 7 Dec 2020 17:47:45 +0000 (19:47 +0200)]
platform/x86: mlx-platform: Fix item counter assignment for MSN2700/ComEx system
[ Upstream commit
cf791774a16caf87b0e4c0c55b82979bad0b6c01 ]
Fix array names to match assignments for data items and data items
counter in 'mlxplat_mlxcpld_comex_items' structure for:
.data = mlxplat_mlxcpld_default_pwr_items_data,
.count = ARRAY_SIZE(mlxplat_mlxcpld_pwr),
and
.data = mlxplat_mlxcpld_default_fan_items_data,
.count = ARRAY_SIZE(mlxplat_mlxcpld_fan),
Replace:
- 'mlxplat_mlxcpld_pwr' by 'mlxplat_mlxcpld_default_pwr_items_data' for
ARRAY_SIZE() calculation.
- 'mlxplat_mlxcpld_fan' by 'mlxplat_mlxcpld_default_fan_items_data'
for ARRAY_SIZE() calculation.
Fixes:
bdd6e155e0d6 ("platform/x86: mlx-platform: Add support for new system type")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20201207174745.22889-3-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vadim Pasternak [Mon, 7 Dec 2020 17:47:44 +0000 (19:47 +0200)]
platform/x86: mlx-platform: Fix item counter assignment for MSN2700, MSN24xx systems
[ Upstream commit
ba4939f1dd46dde08c2f9b9d7ac86ed3ea7ead86 ]
Fix array names to match assignments for data items and data items
counter in 'mlxplat_mlxcpld_default_items' structure for:
.data = mlxplat_mlxcpld_default_pwr_items_data,
.count = ARRAY_SIZE(mlxplat_mlxcpld_pwr),
and
.data = mlxplat_mlxcpld_default_fan_items_data,
.count = ARRAY_SIZE(mlxplat_mlxcpld_fan),
Replace:
- 'mlxplat_mlxcpld_pwr' by 'mlxplat_mlxcpld_default_pwr_items_data' for
ARRAY_SIZE() calculation.
- 'mlxplat_mlxcpld_fan' by 'mlxplat_mlxcpld_default_fan_items_data'
for ARRAY_SIZE() calculation.
Fixes:
c6acad68eb2d ("platform/mellanox: mlxreg-hotplug: Modify to use a regmap interface")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20201207174745.22889-2-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Changzhong [Fri, 4 Dec 2020 07:47:39 +0000 (15:47 +0800)]
scsi: fnic: Fix error return code in fnic_probe()
[ Upstream commit
d4fc94fe65578738ded138e9fce043db6bfc3241 ]
Return a negative error code from the error handling case instead of 0 as
done elsewhere in this function.
Link: https://lore.kernel.org/r/1607068060-31203-1-git-send-email-zhangchangzhong@huawei.com
Fixes:
5df6d737dd4b ("[SCSI] fnic: Add new Cisco PCI-Express FCoE HBA")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Mon, 26 Oct 2020 16:10:58 +0000 (17:10 +0100)]
seq_buf: Avoid type mismatch for seq_buf_init
[ Upstream commit
d9a9280a0d0ae51dc1d4142138b99242b7ec8ac6 ]
Building with W=2 prints a number of warnings for one function that
has a pointer type mismatch:
linux/seq_buf.h: In function 'seq_buf_init':
linux/seq_buf.h:35:12: warning: pointer targets in assignment from 'unsigned char *' to 'char *' differ in signedness [-Wpointer-sign]
Change the type in the function prototype according to the type in
the structure.
Link: https://lkml.kernel.org/r/20201026161108.3707783-1-arnd@kernel.org
Fixes:
9a7777935c34 ("tracing: Convert seq_buf fields to be like seq_file fields")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qinglang Miao [Fri, 20 Nov 2020 07:48:52 +0000 (15:48 +0800)]
scsi: iscsi: Fix inappropriate use of put_device()
[ Upstream commit
6dc1c7ab6f047f45b62986ffebc5324e86ed5f5a ]
kfree(conn) is called inside put_device(&conn->dev) which could lead to
use-after-free. In addition, device_unregister() should be used here rather
than put_deviceO().
Link: https://lore.kernel.org/r/20201120074852.31658-1-miaoqinglang@huawei.com
Fixes:
f3c893e3dbb5 ("scsi: iscsi: Fail session and connection on transport registration failure")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Qilong [Sat, 5 Dec 2020 11:55:51 +0000 (19:55 +0800)]
scsi: pm80xx: Fix error return in pm8001_pci_probe()
[ Upstream commit
97031ccffa4f62728602bfea8439dd045cd3aeb2 ]
The driver did not return an error in the case where
pm8001_configure_phy_settings() failed.
Use rc to store the return value of pm8001_configure_phy_settings().
Link: https://lore.kernel.org/r/20201205115551.2079471-1-zhangqilong3@huawei.com
Fixes:
279094079a44 ("[SCSI] pm80xx: Phy settings support for motherboard controller.")
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qinglang Miao [Mon, 9 Nov 2020 09:15:18 +0000 (17:15 +0800)]
scsi: qedi: Fix missing destroy_workqueue() on error in __qedi_probe
[ Upstream commit
62eebd5247c4e4ce08826ad5995cf4dd7ce919dd ]
Add the missing destroy_workqueue() before return from __qedi_probe in the
error handling case when fails to create workqueue qedi->offload_thread.
Link: https://lore.kernel.org/r/20201109091518.55941-1-miaoqinglang@huawei.com
Fixes:
ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.")
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Walle [Thu, 5 Nov 2020 19:27:44 +0000 (20:27 +0100)]
clk: fsl-sai: fix memory leak
[ Upstream commit
e81bed419f032824e7ddf8b5630153be6637e480 ]
If the device is removed we don't unregister the composite clock. Fix
that.
Fixes:
9cd10205227c ("clk: fsl-sai: new driver")
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20201105192746.19564-2-michael@walle.cc
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Agner [Mon, 7 Dec 2020 17:58:03 +0000 (18:58 +0100)]
arm64: dts: meson: g12b: w400: fix PHY deassert timing requirements
[ Upstream commit
9e454e37dc7c0ee9e108d70b983e7a71332aedff ]
According to the datasheet (Rev. 1.9) the RTL8211F requires at least
72ms "for internal circuits settling time" before accessing the PHY
egisters. On similar boards with the same PHY this fixes an issue where
Ethernet link would not come up when using ip link set down/up.
Fixes:
2cd2310fca4c ("arm64: dts: meson-g12b-ugoos-am6: add initial device-tree")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/46298e66572784c44f873f1b71cc4ab3d8fc5aa6.1607363522.git.stefan@agner.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Agner [Mon, 7 Dec 2020 17:58:02 +0000 (18:58 +0100)]
arm64: dts: meson: g12a: x96-max: fix PHY deassert timing requirements
[ Upstream commit
3d07c3b3a886fefd583c1b485b5e4e3c4e2da493 ]
According to the datasheet (Rev. 1.9) the RTL8211F requires at least
72ms "for internal circuits settling time" before accessing the PHY
registers. On similar boards with the same PHY this fixes an issue where
Ethernet link would not come up when using ip link set down/up.
Fixes:
ed5e8f689154 ("arm64: dts: meson: g12a: x96-max: fix the Ethernet PHY reset line")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/12506964ca5d5f936579a280ad0a7e7f9a0a2d4c.1607363522.git.stefan@agner.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Agner [Mon, 7 Dec 2020 17:58:01 +0000 (18:58 +0100)]
ARM: dts: meson: fix PHY deassert timing requirements
[ Upstream commit
656ab1bdcd2b755dc161a9774201100d5bf74b8d ]
According to the datasheet (Rev. 1.9) the RTL8211F requires at least
72ms "for internal circuits settling time" before accessing the PHY
registers. On similar boards with the same PHY this fixes an issue where
Ethernet link would not come up when using ip link set down/up.
Fixes:
a2c6e82e5341 ("ARM: dts: meson: switch to the generic Ethernet PHY reset bindings")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # on Odroid-C1+
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/ff78772b306411e145769c46d4090554344db41e.1607363522.git.stefan@agner.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Agner [Mon, 7 Dec 2020 17:58:00 +0000 (18:58 +0100)]
arm64: dts: meson: fix PHY deassert timing requirements
[ Upstream commit
c183c406c4321002fe85b345b51bc1a3a04b6d33 ]
According to the datasheet (Rev. 1.9) the RTL8211F requires at least
72ms "for internal circuits settling time" before accessing the PHY
registers. This fixes an issue seen on ODROID-C2 where the Ethernet
link doesn't come up when using ip link set down/up:
[ 6630.714855] meson8b-dwmac
c9410000.ethernet eth0: Link is Down
[ 6630.785775] meson8b-dwmac
c9410000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=36)
[ 6630.893071] meson8b-dwmac
c9410000.ethernet: Failed to reset the dma
[ 6630.893800] meson8b-dwmac
c9410000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
[ 6630.902835] meson8b-dwmac
c9410000.ethernet eth0: stmmac_open: Hw setup failed
Fixes:
f29cabf240ed ("arm64: dts: meson: use the generic Ethernet PHY reset GPIO bindings")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/4a322c198b86e4c8b3dda015560a683babea4d63.1607363522.git.stefan@agner.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Agner [Mon, 7 Dec 2020 17:57:59 +0000 (18:57 +0100)]
arm64: dts: meson: g12b: odroid-n2: fix PHY deassert timing requirements
[ Upstream commit
1c7412530d5d0e0a0b27f1642f5c13c8b9f36f05 ]
According to the datasheet (Rev. 1.9) the RTL8211F requires at least
72ms "for internal circuits settling time" before accessing the PHY
registers. This fixes an issue where the Ethernet link doesn't come up
when using ip link set down/up:
[ 29.360965] meson8b-dwmac
ff3f0000.ethernet eth0: Link is Down
[ 34.569012] meson8b-dwmac
ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=31)
[ 34.676732] meson8b-dwmac
ff3f0000.ethernet: Failed to reset the dma
[ 34.678874] meson8b-dwmac
ff3f0000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
[ 34.687850] meson8b-dwmac
ff3f0000.ethernet eth0: stmmac_open: Hw setup failed
Fixes:
658e4129bb81 ("arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY reset line")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/df3f5c4fc6e43c55429fd3662a636036a21eed49.1607363522.git.stefan@agner.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Walle [Thu, 3 Dec 2020 16:29:58 +0000 (17:29 +0100)]
mtd: spi-nor: atmel: fix unlock_all() for AT25FS010/040
[ Upstream commit
8c174d1511d235ed6c049dcb2b704777ad0df7a5 ]
These flashes have some weird BP bits mapping which aren't supported in
the current locking code. Just add a simple unlock op to unprotect the
entire flash array which is needed for legacy behavior.
Fixes:
3e0930f109e7 ("mtd: spi-nor: Rework the disabling of block write protection")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20201203162959.29589-7-michael@walle.cc
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Walle [Thu, 3 Dec 2020 16:29:55 +0000 (17:29 +0100)]
mtd: spi-nor: atmel: remove global protection flag
[ Upstream commit
e6204d4620276398ed7317d64c369813a1f96615 ]
This is considered bad for the following reasons:
(1) We only support the block protection with BPn bits for write
protection. Not all Atmel parts support this.
(2) Newly added flash chip will automatically inherit the "has
locking" support and thus needs to explicitly tested. Better
be opt-in instead of opt-out.
(3) There are already supported flashes which doesn't support
the locking scheme. So I assume this wasn't properly tested
before adding that chip; which enforces my previous argument
that locking support should be an opt-in.
Remove the global flag and add individual flags to all flashes which
supports BP locking. In particular the following flashes don't support
the BP scheme:
- AT26F004
- AT25SL321
- AT45DB081D
Please note, that some flashes which are marked as SPI_NOR_HAS_LOCK just
support Global Protection, i.e. not our supported block protection
locking scheme. This is to keep backwards compatibility with the
current "unlock all at boot" mechanism. In particular the following
flashes doesn't have BP bits:
- AT25DF041A
- AT25DF321
- AT25DF321A
- AT25DF641
- AT26DF081A
- AT26DF161A
- AT26DF321
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20201203162959.29589-4-michael@walle.cc
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Walle [Thu, 3 Dec 2020 16:29:54 +0000 (17:29 +0100)]
mtd: spi-nor: ignore errors in spi_nor_unlock_all()
[ Upstream commit
bdb1a75e4b9df6861ec6a6e3e3997820d3cebabe ]
Just try to unlock the whole SPI-NOR flash array. Don't abort the
probing in case of an error. Justifications:
(1) For some boards, this just works because
spi_nor_write_16bit_sr_and_check() is broken and just checks the
second half of the 16bit. Once that will be fixed, SPI probe will
fail for boards which has hardware-write protected SPI-NOR flashes.
(2) Until now, hardware write-protection was the only viable solution
to use the block protection bits. This is because this very
function spi_nor_unlock_all() will be called unconditionally on
every linux boot. Therefore, this bits only makes sense in
combination with the hardware write-protection. If we would fail
the SPI probe on an error in spi_nor_unlock_all() we'd break
virtually all users of the block protection bits.
(3) We should try hard to keep the MTD working even if the flash might
not be writable/erasable.
Fixes:
3e0930f109e7 ("mtd: spi-nor: Rework the disabling of block write protection")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20201203162959.29589-3-michael@walle.cc
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Walle [Thu, 3 Dec 2020 16:29:53 +0000 (17:29 +0100)]
mtd: spi-nor: sst: fix BPn bits for the SST25VF064C
[ Upstream commit
989d4b72bae3b05c1564d38e71e18f65b12734fb ]
This flash part actually has 4 block protection bits.
Please note, that this patch is just based on information of the
datasheet of the datasheet and wasn't tested.
Fixes:
3e0930f109e7 ("mtd: spi-nor: Rework the disabling of block write protection")
Reported-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20201203162959.29589-2-michael@walle.cc
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Changzhong [Fri, 4 Dec 2020 08:47:17 +0000 (16:47 +0800)]
adm8211: fix error return code in adm8211_probe()
[ Upstream commit
05c2a61d69ea306e891884a86486e1ef37c4b78d ]
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes:
cc0b88cf5ecf ("[PATCH] Add adm8211 802.11b wireless driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607071638-33619-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Sat, 12 Sep 2020 09:35:32 +0000 (11:35 +0200)]
platform/x86: intel-vbtn: Fix SW_TABLET_MODE always reporting 1 on some HP x360 models
[ Upstream commit
a4327979a19e8734ddefbd8bcbb73bd9905b69cd ]
Some HP x360 models have an ACPI VGBS method which sets bit 4 instead of
bit 6 when NOT in tablet mode at boot. Inspecting all the DSDTs in my DSDT
collection shows only one other model, the Medion E1239T ever setting bit 4
and it always sets this together with bit 6.
So lets treat bit 4 as a second bit which when set indicates the device not
being in tablet-mode, as we already do for bit 6.
While at it also prefix all VGBS constant defines with "VGBS_".
Note this wrokaround was first added to the kernel as
commit
d823346876a9 ("platform/x86: intel-vbtn: Fix SW_TABLET_MODE always
reporting 1 on the HP Pavilion 11 x360").
After commit
8169bd3e6e19 ("platform/x86: intel-vbtn: Switch to an
allow-list for SW_TABLET_MODE reporting") got added to the kernel this
was reverted, because with the new allow-list approach the workaround
was no longer necessary for the model on which the issue was first
reported.
But it turns out that the workaround is still necessary because some
affected models report a chassis-type of 31 which is on the allow-list.
BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1894017
Fixes:
21d64817c724 ("platform/x86: intel-vbtn: Revert "Fix SW_TABLET_MODE always reporting 1 on the HP Pavilion 11 x360"")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Sat, 5 Dec 2020 15:02:00 +0000 (16:02 +0100)]
Bluetooth: btusb: Fix detection of some fake CSR controllers with a bcdDevice val of 0x0134
[ Upstream commit
d74e0ae7e03032b47b8631cc1e52a7ae1ce988c0 ]
Commit
cde1a8a99287 ("Bluetooth: btusb: Fix and detect most of the
Chinese Bluetooth controllers") made the detection of fake controllers
more generic fixing it for much of the newer fakes / clones.
But this does not work for a fake CSR controller with a bcdDevice
value of 0x0134, which was correctly identified as fake before
this change.
Add an extra check for this special case, checking for a combination
of a bcdDevice value of 0x0134, together with a lmp_subver of 0x0c5c
and a hci_ver of BLUETOOTH_VER_2_0.
The chip inside this fake dongle is marked as with "clockwise cw6629d".
Fixes:
cde1a8a99287 ("Bluetooth: btusb: Fix and detect most of the Chinese Bluetooth controllers")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Colin Ian King [Mon, 7 Dec 2020 14:54:46 +0000 (14:54 +0000)]
block/rnbd: fix a null pointer dereference on dev->blk_symlink_name
[ Upstream commit
733c15bd3a944b8eeaacdddf061759b6a83dd3f4 ]
Currently in the case where dev->blk_symlink_name fails to be allocates
the error return path attempts to set an end-of-string character to
the unallocated dev->blk_symlink_name causing a null pointer dereference
error. Fix this by returning with an explicity ENOMEM error (which also
is missing in the original code as was not initialized).
Fixes:
1eb54f8f5dd8 ("block/rnbd: client: sysfs interface functions")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Dereference after null check")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Md Haris Iqbal [Thu, 26 Nov 2020 10:47:23 +0000 (11:47 +0100)]
block/rnbd-clt: Dynamically alloc buffer for pathname & blk_symlink_name
[ Upstream commit
64e8a6ece1a5b1fa21316918053d068baeac84af ]
For every rnbd_clt_dev, we alloc the pathname and blk_symlink_name
statically to NAME_MAX which is 255 bytes. In most of the cases we only
need less than 10 bytes, so 500 bytes per block device are wasted.
This commit dynamically allocates memory buffer for pathname and
blk_symlink_name.
Signed-off-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Lutz Pogrell <lutz.pogrell@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wei Yongjun [Mon, 16 Nov 2020 13:24:21 +0000 (21:24 +0800)]
Bluetooth: sco: Fix crash when using BT_SNDMTU/BT_RCVMTU option
[ Upstream commit
f6b8c6b5543983e9de29dc14716bfa4eb3f157c4 ]
This commit add the invalid check for connected socket, without it will
causes the following crash due to sco_pi(sk)->conn being NULL:
KASAN: null-ptr-deref in range [0x0000000000000050-0x0000000000000057]
CPU: 3 PID: 4284 Comm: test_sco Not tainted 5.10.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
RIP: 0010:sco_sock_getsockopt+0x45d/0x8e0
Code: 48 c1 ea 03 80 3c 02 00 0f 85 ca 03 00 00 49 8b 9d f8 04 00 00 48 b8 00
00 00 00 00 fc ff df 48 8d 7b 50 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84
c0 74 08 3c 03 0f 8e b5 03 00 00 8b 43 50 48 8b 0c
RSP: 0018:
ffff88801bb17d88 EFLAGS:
00010206
RAX:
dffffc0000000000 RBX:
0000000000000000 RCX:
ffffffff83a4ecdf
RDX:
000000000000000a RSI:
ffffc90002fce000 RDI:
0000000000000050
RBP:
1ffff11003762fb4 R08:
0000000000000001 R09:
ffff88810e1008c0
R10:
ffffffffbd695dcf R11:
fffffbfff7ad2bb9 R12:
0000000000000000
R13:
ffff888018ff1000 R14:
dffffc0000000000 R15:
000000000000000d
FS:
00007fb4f76c1700(0000) GS:
ffff88811af80000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00005555e3b7a938 CR3:
00000001117be001 CR4:
0000000000770ee0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
PKRU:
55555554
Call Trace:
? sco_skb_put_cmsg+0x80/0x80
? sco_skb_put_cmsg+0x80/0x80
__sys_getsockopt+0x12a/0x220
? __ia32_sys_setsockopt+0x150/0x150
? syscall_enter_from_user_mode+0x18/0x50
? rcu_read_lock_bh_held+0xb0/0xb0
__x64_sys_getsockopt+0xba/0x150
? syscall_enter_from_user_mode+0x1d/0x50
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes:
0fc1a726f897 ("Bluetooth: sco: new getsockopt options BT_SNDMTU/BT_RCVMTU")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Luiz Augusto Von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jing Xiangfeng [Tue, 17 Nov 2020 02:43:32 +0000 (10:43 +0800)]
Bluetooth: btmtksdio: Add the missed release_firmware() in mtk_setup_firmware()
[ Upstream commit
b73b5781a85c03113476f62346c390f0277baa4b ]
mtk_setup_firmware() misses to call release_firmware() in an error
path. Jump to free_fw to fix it.
Fixes:
737cd06072a7 ("Bluetooth: btmtksdio: fix up firmware download sequence")
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jing Xiangfeng [Tue, 17 Nov 2020 02:59:17 +0000 (10:59 +0800)]
Bluetooth: btusb: Add the missed release_firmware() in btusb_mtk_setup_firmware()
[ Upstream commit
d1e9d232e1e60fa63df1b836ec3ecba5abd3fa9d ]
btusb_mtk_setup_firmware() misses to call release_firmware() in an error
path. Jump to err_release_fw to fix it.
Fixes:
f645125711c8 ("Bluetooth: btusb: fix up firmware download sequence")
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Changzhong [Fri, 4 Dec 2020 08:42:37 +0000 (16:42 +0800)]
spi: dw: Fix error return code in dw_spi_bt1_probe()
[ Upstream commit
e748edd9841306908b4e02dddd0afd1aa1f8b973 ]
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes:
abf00907538e ("spi: dw: Add Baikal-T1 SPI Controller glue driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/1607071357-33378-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wang Hai [Sat, 5 Dec 2020 10:38:27 +0000 (18:38 +0800)]
staging: greybus: audio: Fix possible leak free widgets in gbaudio_dapm_free_controls
[ Upstream commit
e77b259f67ab99f1e22ce895b9b1c637fd5f2d4c ]
In gbaudio_dapm_free_controls(), if one of the widgets is not found, an error
will be returned directly, which will cause the rest to be unable to be freed,
resulting in leak.
This patch fixes the bug. If if one of them is not found, just skip and free the others.
Fixes:
510e340efe0c ("staging: greybus: audio: Add helper APIs for dynamic audio module")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20201205103827.31244-1-wanghai38@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Thu, 3 Dec 2020 22:38:30 +0000 (23:38 +0100)]
staging: bcm2835: fix vchiq_mmal dependencies
[ Upstream commit
6c91799f59ed491a2b5bf5ef7c6d60306cda4e09 ]
When the MMAL code is built-in but the vchiq core config is
set to =m, the mmal code never gets built, which in turn can
lead to link errors:
ERROR: modpost: "vchiq_mmal_port_set_format" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "vchiq_mmal_port_disable" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "vchiq_mmal_port_parameter_set" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "vchiq_mmal_component_finalise" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "vchiq_mmal_port_connect_tunnel" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "vchiq_mmal_component_enable" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "vchiq_mmal_finalise" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "vchiq_mmal_component_init" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "vchiq_mmal_component_disable" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "mmal_vchi_buffer_init" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "vchiq_mmal_port_enable" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "vchiq_mmal_version" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "vchiq_mmal_submit_buffer" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "vchiq_mmal_init" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "mmal_vchi_buffer_cleanup" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "vchiq_mmal_port_parameter_get" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
Change the Kconfig to depend on BCM2835_VCHIQ like the other drivers,
and remove the now redundant dependencies.
Fixes:
b18ee53ad297 ("staging: bcm2835: Break MMAL support out from camera")
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20201203223836.1362313-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Finn Thain [Fri, 20 Nov 2020 04:39:56 +0000 (15:39 +1100)]
macintosh/adb-iop: Send correct poll command
[ Upstream commit
10199e90ee20e68859f8128331ec8d85b036d349 ]
The behaviour of the IOP firmware is not well documented but we do know
that IOP message reply data can be used to issue new ADB commands.
Use the message reply to better control autopoll behaviour by sending
a Talk Register 0 command after every ADB response, not unlike the
algorithm in the via-macii driver. This poll command is addressed to
that device which last received a Talk command (explicit or otherwise).
Cc: Joshua Thompson <funaho@jurai.org>
Fixes:
32226e817043 ("macintosh/adb-iop: Implement idle -> sending state transition")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Link: https://lore.kernel.org/r/58bba4310da4c29b068345a4b36af8a531397ff7.1605847196.git.fthain@telegraphics.com.au
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Finn Thain [Fri, 20 Nov 2020 04:39:56 +0000 (15:39 +1100)]
macintosh/adb-iop: Always wait for reply message from IOP
[ Upstream commit
2c9cfbadfa234b03473f1ef54e6f4772cc07a371 ]
A recent patch incorrectly altered the adb-iop state machine behaviour
and introduced a regression that can appear intermittently as a
malfunctioning ADB input device. This seems to be caused when reply
packets from different ADB commands become mixed up, especially during
the adb bus scan. Fix this by unconditionally entering the awaiting_reply
state after sending an explicit command, even when the ADB command won't
generate a reply from the ADB device.
It turns out that the IOP always generates reply messages, even when the
ADB command does not produce a reply packet (e.g. ADB Listen command).
So it's not really the ADB reply packets that are being mixed up, it's the
IOP messages that enclose them. The bug goes like this:
1. CPU sends a message to the IOP, expecting no response because this
message contains an ADB Listen command. The ADB command is now
considered complete.
2. CPU sends a second message to the IOP, this time expecting a
response because this message contains an ADB Talk command. This
ADB command needs a reply before it can be completed.
3. adb-iop driver receives an IOP message and assumes that it relates
to the Talk command. It's actually an empty one (with flags ==
ADB_IOP_EXPLICIT|ADB_IOP_TIMEOUT) for the previous command. The
Talk command is now considered complete but it gets the wrong reply
data.
4. adb-iop driver gets another IOP response message, which contains
the actual reply data for the Talk command, but this is dropped
(the driver is no longer in awaiting_reply state).
Cc: Joshua Thompson <funaho@jurai.org>
Fixes:
e2954e5f727f ("macintosh/adb-iop: Implement sending -> idle state transition")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Link: https://lore.kernel.org/r/0f0a25855391e7eaa53a50f651aea0124e8525dd.1605847196.git.fthain@telegraphics.com.au
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Thu, 3 Dec 2020 22:53:32 +0000 (23:53 +0100)]
cpufreq: imx: fix NVMEM_IMX_OCOTP dependency
[ Upstream commit
fc928b901dc68481ba3e524860a641fe13e25dfe ]
A driver should not 'select' drivers from another subsystem.
If NVMEM is disabled, this one results in a warning:
WARNING: unmet direct dependencies detected for NVMEM_IMX_OCOTP
Depends on [n]: NVMEM [=n] && (ARCH_MXC [=y] || COMPILE_TEST [=y]) && HAS_IOMEM [=y]
Selected by [y]:
- ARM_IMX6Q_CPUFREQ [=y] && CPU_FREQ [=y] && (ARM || ARM64 [=y]) && ARCH_MXC [=y] && REGULATOR_ANATOP [=y]
Change the 'select' to 'depends on' to prevent it from going wrong,
and allow compile-testing without that driver, since it is only
a runtime dependency.
Fixes:
2782ef34ed23 ("cpufreq: imx: Select NVMEM_IMX_OCOTP")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pali Rohár [Tue, 3 Nov 2020 15:11:39 +0000 (16:11 +0100)]
cpufreq: vexpress-spc: Add missing MODULE_ALIAS
[ Upstream commit
d15183991c2d53d7cecf27a1555c91b702cef1ea ]
This patch adds missing MODULE_ALIAS for automatic loading of this cpufreq
driver when it is compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes:
47ac9aa165540 ("cpufreq: arm_big_little: add vexpress SPC interface driver")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pali Rohár [Tue, 3 Nov 2020 15:11:38 +0000 (16:11 +0100)]
cpufreq: scpi: Add missing MODULE_ALIAS
[ Upstream commit
c0382d049d2def37b81e907a8b22661a4a4a6eb5 ]
This patch adds missing MODULE_ALIAS for automatic loading of this cpufreq
driver when it is compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes:
8def31034d033 ("cpufreq: arm_big_little: add SCPI interface driver")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pali Rohár [Tue, 3 Nov 2020 15:11:37 +0000 (16:11 +0100)]
cpufreq: loongson1: Add missing MODULE_ALIAS
[ Upstream commit
b9acab091842ca8b288882798bb809f7abf5408a ]
This patch adds missing MODULE_ALIAS for automatic loading of this cpufreq
driver when it is compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes:
a0a22cf14472f ("cpufreq: Loongson1: Add cpufreq driver for Loongson1B")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pali Rohár [Tue, 3 Nov 2020 15:11:36 +0000 (16:11 +0100)]
cpufreq: sun50i: Add missing MODULE_DEVICE_TABLE
[ Upstream commit
af2096f285077e3339eb835ad06c50bdd59f01b5 ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes:
f328584f7bff8 ("cpufreq: Add sun50i nvmem based CPU scaling driver")
Reviewed-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pali Rohár [Tue, 3 Nov 2020 15:11:35 +0000 (16:11 +0100)]
cpufreq: st: Add missing MODULE_DEVICE_TABLE
[ Upstream commit
183747ab52654eb406fc6b5bfb40806b75d31811 ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes:
ab0ea257fc58d ("cpufreq: st: Provide runtime initialised driver for ST's platforms")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pali Rohár [Tue, 3 Nov 2020 15:11:34 +0000 (16:11 +0100)]
cpufreq: qcom: Add missing MODULE_DEVICE_TABLE
[ Upstream commit
a5a6031663bc1dd0a10babd49d1bcb3153a8327f ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes:
46e2856b8e188 ("cpufreq: Add Kryo CPU scaling driver")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pali Rohár [Tue, 3 Nov 2020 15:11:33 +0000 (16:11 +0100)]
cpufreq: mediatek: Add missing MODULE_DEVICE_TABLE
[ Upstream commit
af6eca06501118af3e2ad46eee8edab20624b74e ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes:
501c574f4e3a5 ("cpufreq: mediatek: Add support of cpufreq to MT2701/MT7623 SoC")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pali Rohár [Tue, 3 Nov 2020 15:11:32 +0000 (16:11 +0100)]
cpufreq: highbank: Add missing MODULE_DEVICE_TABLE
[ Upstream commit
9433777a6e0aae27468d3434b75cd51bb88ff711 ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes:
6754f556103be ("cpufreq / highbank: add support for highbank cpufreq")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pali Rohár [Tue, 3 Nov 2020 15:11:31 +0000 (16:11 +0100)]
cpufreq: ap806: Add missing MODULE_DEVICE_TABLE
[ Upstream commit
925a5bcefe105f2790ecbdc252eb2315573f309d ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes:
f525a670533d9 ("cpufreq: ap806: add cpufreq driver for Armada 8K")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Keqian Zhu [Fri, 4 Dec 2020 07:31:26 +0000 (15:31 +0800)]
clocksource/drivers/arm_arch_timer: Correct fault programming of CNTKCTL_EL1.EVNTI
[ Upstream commit
8b7770b877d187bfdae1eaf587bd2b792479a31c ]
ARM virtual counter supports event stream, it can only trigger an event
when the trigger bit (the value of CNTKCTL_EL1.EVNTI) of CNTVCT_EL0 changes,
so the actual period of event stream is 2^(cntkctl_evnti + 1). For example,
when the trigger bit is 0, then virtual counter trigger an event for every
two cycles.
While we're at it, rework the way we compute the trigger bit position
by making it more obvious that when bits [n:n-1] are both set (with n
being the most significant bit), we pick bit (n + 1).
Fixes:
037f637767a8 ("drivers: clocksource: add support for ARM architected timer event stream")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20201204073126.6920-3-zhukeqian1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Keqian Zhu [Fri, 4 Dec 2020 07:31:25 +0000 (15:31 +0800)]
clocksource/drivers/arm_arch_timer: Use stable count reader in erratum sne
[ Upstream commit
d8cc3905b8073c7cfbff94af889fa8dc71f21dd5 ]
In commit
0ea415390cd3 ("clocksource/arm_arch_timer: Use arch_timer_read_counter
to access stable counters"), we separate stable and normal count reader to omit
unnecessary overhead on systems that have no timer erratum.
However, in erratum_set_next_event_tval_generic(), count reader becomes normal
reader. This converts it to stable reader.
Fixes:
0ea415390cd3 ("clocksource/arm_arch_timer: Use arch_timer_read_counter to access stable counters")
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20201204073126.6920-2-zhukeqian1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Thu, 3 Dec 2020 23:13:38 +0000 (00:13 +0100)]
drm/msm: add IOMMU_SUPPORT dependency
[ Upstream commit
e319a1b956f785f618611857cd946dca2bb68542 ]
The iommu pgtable support is only available when IOMMU support
is built into the kernel:
WARNING: unmet direct dependencies detected for IOMMU_IO_PGTABLE
Depends on [n]: IOMMU_SUPPORT [=n]
Selected by [y]:
- DRM_MSM [=y] && HAS_IOMEM [=y] && DRM [=y] && (ARCH_QCOM [=y] || SOC_IMX5 || ARM && COMPILE_TEST [=y]) && OF [=y] && COMMON_CLK [=y] && MMU [=y] && (QCOM_OCMEM [=y] || QCOM_OCMEM [=y]=n)
Fix the dependency accordingly. There is no need for depending on
CONFIG_MMU any more, as that is implied by the iommu support.
Fixes:
b145c6e65eb0 ("drm/msm: Add support to create a local pagetable")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marijn Suijten [Mon, 2 Nov 2020 20:02:25 +0000 (21:02 +0100)]
drm/msm: a5xx: Make preemption reset case reentrant
[ Upstream commit
7cc29fcdfcc8784e97c5151c848e193800ec79ac ]
nr_rings is reset to 1, but when this function is called for a second
(and third!) time nr_rings > 1 is false, thus the else case is entered
to set up a buffer for the RPTR shadow and consequently written to
RB_RPTR_ADDR, hanging platforms without WHERE_AM_I firmware support.
Restructure the condition in such a way that shadow buffer setup only
ever happens when has_whereami is true; otherwise preemption is only
finalized when the number of ring buffers has not been reset to 1 yet.
Fixes:
8907afb476ac ("drm/msm: Allow a5xx to mark the RPTR shadow as privileged")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Changzhong [Fri, 4 Dec 2020 08:31:57 +0000 (16:31 +0800)]
memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe()
[ Upstream commit
4bfa07300b9334b487ed4f3d4901c35ebb31b7ca ]
platform_get_resource() may fail and return NULL, so we should
better check it's return value to avoid a NULL pointer dereference
a bit later in the code.
This is detected by Coccinelle semantic patch.
Fixes:
911a88829725 ("memory: jz4780-nemc: driver for the NEMC on JZ4780 SoCs")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/1607070717-32880-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Thu, 3 Dec 2020 23:08:14 +0000 (00:08 +0100)]
memory: ti-emif-sram: only build for ARMv7
[ Upstream commit
d77d22d701b0471584abe1871570bb43deb6e3c4 ]
The driver can be compile-tested on all ARM machines, but
causes a failure when built for ARMv7-M:
arm-linux-gnueabi-ld: error: drivers/memory/ti-emif-sram-pm.o: conflicting architecture profiles A/M
Limit the target machines to configurations that have ARMv7 enabled.
Fixes:
ea0c0ad6b6eb ("memory: Enable compile testing for most of the drivers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20201203230832.1481767-1-arnd@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wang Li [Thu, 26 Nov 2020 02:44:12 +0000 (10:44 +0800)]
phy: renesas: rcar-gen3-usb2: disable runtime pm in case of failure
[ Upstream commit
51e339deab1e51443f6ac3b1bd5cd6cc8e8fe1d9 ]
pm_runtime_enable() will decrease power disable depth. Thus a pairing
increment is needed on the error handling path to keep it balanced.
Fixes:
5d8042e95fd4 ("phy: rcar-gen3-usb2: Add support for r8a77470")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Li <wangli74@huawei.com>
Link: https://lore.kernel.org/r/20201126024412.4046845-1-wangli74@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Fri, 4 Dec 2020 13:56:43 +0000 (14:56 +0100)]
phy: mediatek: allow compile-testing the hdmi phy
[ Upstream commit
f5f6e01f9164040ba120f30522efdb4deceb529a ]
Compile-testing the DRM_MEDIATEK_HDMI driver shows two missing
dependencies, one results in a link failure:
arm-linux-gnueabi-ld: drivers/phy/mediatek/phy-mtk-hdmi.o: in function `mtk_hdmi_phy_probe':
phy-mtk-hdmi.c:(.text+0xd8): undefined reference to `__clk_get_name'
arm-linux-gnueabi-ld: phy-mtk-hdmi.c:(.text+0x12c): undefined reference to `devm_clk_register'
arm-linux-gnueabi-ld: phy-mtk-hdmi.c:(.text+0x250): undefined reference to `of_clk_add_provider'
arm-linux-gnueabi-ld: phy-mtk-hdmi.c:(.text+0x298): undefined reference to `of_clk_src_simple_get'
The other one is a harmless warning:
WARNING: unmet direct dependencies detected for PHY_MTK_HDMI
Depends on [n]: ARCH_MEDIATEK [=n] && OF [=y]
Selected by [y]:
- DRM_MEDIATEK_HDMI [=y] && HAS_IOMEM [=y] && DRM_MEDIATEK [=y]
Fix these by adding dependencies on CONFIG_OF and CONFIG_COMMON_CLK.
With that done, there is also no reason against adding
CONFIG_COMPILE_TEST.
Fixes:
b28be59a2e26 ("phy: mediatek: Move mtk_hdmi_phy driver into drivers/phy/mediatek folder")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20201204135650.2744481-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Thu, 3 Dec 2020 23:14:18 +0000 (00:14 +0100)]
ASoC: qcom: fix QDSP6 dependencies, attempt #3
[ Upstream commit
b1b8eb1283c90a953089d988930d7b6156418958 ]
The previous fix left another warning in randconfig builds:
WARNING: unmet direct dependencies detected for SND_SOC_QDSP6
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_QCOM [=y] && QCOM_APR [=y] && COMMON_CLK [=n]
Selected by [y]:
- SND_SOC_MSM8996 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_QCOM [=y] && QCOM_APR [=y]
Add one more dependency for this one.
Fixes:
2bc8831b135c ("ASoC: qcom: fix SDM845 & QDSP6 dependencies more")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201203231443.1483763-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Thu, 3 Dec 2020 22:38:05 +0000 (23:38 +0100)]
ASoC: atmel: mchp-spdifrx needs COMMON_CLK
[ Upstream commit
29275309b0e32bb838d67158c6b6e687275f43e9 ]
Compile-testing this driver on an older platform without CONFIG_COMMON_CLK fails with
ERROR: modpost: "clk_set_min_rate" [sound/soc/atmel/snd-soc-mchp-spdifrx.ko] undefined!
Make this is a strict dependency.
Fixes:
ef265c55c1ac ("ASoC: mchp-spdifrx: add driver for SPDIF RX")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20201203223815.1353451-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Thu, 3 Dec 2020 22:54:41 +0000 (23:54 +0100)]
ASoC: cros_ec_codec: fix uninitialized memory read
[ Upstream commit
7061b8a52296e044eed47b605d136a48da1a7761 ]
gcc points out a memory area that is copied to a device
but not initialized:
sound/soc/codecs/cros_ec_codec.c: In function 'i2s_rx_event':
arch/x86/include/asm/string_32.h:83:20: error: '*((void *)&p+4)' may be used uninitialized in this function [-Werror=maybe-uninitialized]
83 | *((int *)to + 1) = *((int *)from + 1);
Initialize all the unused fields to zero.
Fixes:
727f1c71c780 ("ASoC: cros_ec_codec: refactor I2S RX")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201203225458.1477830-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qinglang Miao [Sat, 28 Nov 2020 10:19:59 +0000 (18:19 +0800)]
dm ioctl: fix error return code in target_message
[ Upstream commit
4d7659bfbe277a43399a4a2d90fca141e70f29e1 ]
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes:
2ca4c92f58f9 ("dm ioctl: prevent empty message")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Srinivas Kandagatla [Fri, 4 Dec 2020 16:42:28 +0000 (16:42 +0000)]
ASoC: q6afe-clocks: Add missing parent clock rate
[ Upstream commit
7e20ae1208daaf6dad85c2dcb968fc590b6f3b99 ]
setting clock rate on child clocks without a parent clock rate will
result in zero clk rate for child. This also means that when audio
is started dsp will attempt to access registers without enabling
clock resulting in board boot up.
Fix this by adding the missing parent clock rate.
Fixes:
520a1c396d196 ("ASoC: q6afe-clocks: add q6afe clock controller")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201204164228.1826-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chuhong Yuan [Thu, 3 Dec 2020 14:42:27 +0000 (22:42 +0800)]
ASoC: jz4740-i2s: add missed checks for clk_get()
[ Upstream commit
1c1fb2653a0c2e3f310c07eacd8fc3a10e08c97a ]
jz4740_i2s_set_sysclk() does not check the return values of clk_get(),
while the file dereferences the pointers in clk_put().
Add the missed checks to fix it.
Fixes:
11bd3dd1b7c2 ("ASoC: Add JZ4740 ASoC support")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20201203144227.418194-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lorenzo Bianconi [Sat, 17 Oct 2020 15:15:25 +0000 (17:15 +0200)]
mt76: fix tkip configuration for mt7615/7663 devices
[ Upstream commit
930e0eaddf810cfa90e114a0df02f48539e1346f ]
Fix Tx-Rx MIC overwrite during TKIP hw key configuration
Fixes:
01cfc1b45421 ("mt76: mt7615: add BIP_CMAC_128 cipher support")
Tested-by: YN Chen <yn.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lorenzo Bianconi [Tue, 13 Oct 2020 08:33:49 +0000 (10:33 +0200)]
mt76: fix memory leak if device probing fails
[ Upstream commit
bc348defcc6eceeb4f7784bf9a263ddb72fd3fb4 ]
Run mt76_free_device instead of ieee80211_free_hw if device probing
fails in order to remove the already allocated mt76 workqueue
Fixes:
a86f1d01f5ce5 ("mt76: move mt76 workqueue in common code")
Fixes:
f1d962369d568 ("mt76: mt7915: implement HE per-rate tx power support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Leon Romanovsky [Thu, 15 Oct 2020 11:52:00 +0000 (14:52 +0300)]
net/mlx5: Properly convey driver version to firmware
[ Upstream commit
907af0f0cab4ee5d5604f182ecec2c5b5119d294 ]
mlx5 firmware expects driver version in specific format X.X.X, so
make it always correct and based on real kernel version aligned with
the driver.
Fixes:
012e50e109fd ("net/mlx5: Set driver version into firmware")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lorenzo Bianconi [Sun, 11 Oct 2020 22:43:55 +0000 (00:43 +0200)]
mt76: dma: fix possible deadlock running mt76_dma_cleanup
[ Upstream commit
5f0ce5848733b86deaba1c6d102e20479230b20a ]
Fix the following possible deadlock reported by lockdep disabling BH
running mt76_free_pending_txwi()
================================
WARNING: inconsistent lock state
5.9.0-rc6 #14 Not tainted
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
rmmod/1227 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffff888156a83530 (&dev->lock#2){+.?.}-{2:2}, at: mt76_dma_cleanup+0x125/0x150 [mt76]
{IN-SOFTIRQ-W} state was registered at:
__lock_acquire+0x20c/0x6b0
lock_acquire+0x9d/0x220
_raw_spin_lock+0x2c/0x70
mt76_dma_tx_cleanup+0xc7/0x200 [mt76]
mt76x02_poll_tx+0x31/0xb0 [mt76x02_lib]
napi_poll+0x3a/0x100
net_rx_action+0xa8/0x200
__do_softirq+0xc4/0x430
asm_call_on_stack+0xf/0x20
do_softirq_own_stack+0x49/0x60
irq_exit_rcu+0x9a/0xd0
common_interrupt+0xa4/0x190
asm_common_interrupt+0x1e/0x40
irq event stamp: 9915
hardirqs last enabled at (9915): [<
ffffffff8124e286>] __free_pages_ok+0x336/0x3b0
hardirqs last disabled at (9914): [<
ffffffff8124e24e>] __free_pages_ok+0x2fe/0x3b0
softirqs last enabled at (9912): [<
ffffffffa03aa672>] mt76_dma_rx_cleanup+0xa2/0x120 [mt76]
softirqs last disabled at (9846): [<
ffffffffa03aa5ea>] mt76_dma_rx_cleanup+0x1a/0x120 [mt76]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&dev->lock#2);
<Interrupt>
lock(&dev->lock#2);
*** DEADLOCK ***
1 lock held by rmmod/1227:
#0:
ffff88815b5eb240 (&dev->mutex){....}-{3:3}, at: driver_detach+0xb5/0x110
stack backtrace:
CPU: 1 PID: 1227 Comm: rmmod Kdump: loaded Not tainted 5.9.0-rc6-wdn-src+ #14
Hardware name: Dell Inc. Studio XPS 1340/0K183D, BIOS A11 09/08/2009
Call Trace:
dump_stack+0x77/0xa0
mark_lock_irq.cold+0x15/0x39
mark_lock+0x1fc/0x500
mark_usage+0xc7/0x140
__lock_acquire+0x20c/0x6b0
? find_held_lock+0x2b/0x80
? sched_clock_cpu+0xc/0xb0
lock_acquire+0x9d/0x220
? mt76_dma_cleanup+0x125/0x150 [mt76]
_raw_spin_lock+0x2c/0x70
? mt76_dma_cleanup+0x125/0x150 [mt76]
mt76_dma_cleanup+0x125/0x150 [mt76]
mt76x2_cleanup+0x5a/0x70 [mt76x2e]
mt76x2e_remove+0x18/0x30 [mt76x2e]
pci_device_remove+0x36/0xa0
__device_release_driver+0x16c/0x220
driver_detach+0xcf/0x110
bus_remove_driver+0x56/0xca
pci_unregister_driver+0x36/0x80
__do_sys_delete_module.constprop.0+0x127/0x200
? syscall_enter_from_user_mode+0x1d/0x50
? trace_hardirqs_on+0x1c/0xe0
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7ff0da54e36b
Code: 73 01 c3 48 8b 0d 2d 0b 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d fd 0a 0c 00 f7 d8 64 89 01 48
Fixes:
dd57a95cfddc ("mt76: move txwi handling code to dma.c, since it is mmio specific")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Taehee Yoo [Thu, 8 Oct 2020 15:51:56 +0000 (15:51 +0000)]
mt76: set fops_tx_stats.owner to THIS_MODULE
[ Upstream commit
f9df085ce1be5c599e4df590ff7ba853786c6d95 ]
If THIS_MODULE is not set, the module would be removed while debugfs is
being used.
It eventually makes kernel panic.
Fixes:
e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Taehee Yoo [Thu, 8 Oct 2020 15:51:57 +0000 (15:51 +0000)]
mt76: mt7915: set fops_sta_stats.owner to THIS_MODULE
[ Upstream commit
5efbe3b1b8992d5f837388091920945c23212159 ]
If THIS_MODULE is not set, the module would be removed while debugfs is
being used.
It eventually makes kernel panic.
Fixes:
ec9742a8f38e ("mt76: mt7915: add .sta_add_debugfs support")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lorenzo Bianconi [Mon, 5 Oct 2020 15:22:23 +0000 (17:22 +0200)]
mt76: mt7663s: fix a possible ple quota underflow
[ Upstream commit
1c79a190e94325e01811f653f770a34e816fdd8f ]
Properly account current consumed ple quota in mt7663s_tx_pick_quota
routine and avoid possible underflow.
Fixes:
6ef2d665f64d ("mt76: mt7663s: split mt7663s_tx_update_sched in mt7663s_tx_{pick,update}_quota")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Sverdlin [Thu, 3 Dec 2020 12:36:48 +0000 (13:36 +0100)]
MIPS: Don't round up kernel sections size for memblock_add()
[ Upstream commit
d121f125af22a16f0f679293756d28a9691fa46d ]
Linux doesn't own the memory immediately after the kernel image. On Octeon
bootloader places a shared structure right close after the kernel _end,
refer to "struct cvmx_bootinfo *octeon_bootinfo" in cavium-octeon/setup.c.
If check_kernel_sections_mem() rounds the PFNs up, first memblock_alloc()
inside early_init_dt_alloc_memory_arch() <= device_tree_init() returns
memory block overlapping with the above octeon_bootinfo structure, which
is being overwritten afterwards.
Fixes:
a94e4f24ec83 ("MIPS: init: Drop boot_mem_map")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jing Xiangfeng [Wed, 25 Nov 2020 01:47:18 +0000 (09:47 +0800)]
memstick: r592: Fix error return in r592_probe()
[ Upstream commit
db29d3d1c2451e673e29c7257471e3ce9d50383a ]
Fix to return a error code from the error handling case instead of 0.
Fixes:
926341250102 ("memstick: add driver for Ricoh R5C592 card reader")
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Link: https://lore.kernel.org/r/20201125014718.153563-1-jingxiangfeng@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chen-Yu Tsai [Fri, 4 Dec 2020 06:48:05 +0000 (14:48 +0800)]
arm64: dts: rockchip: Fix UART pull-ups on rk3328
[ Upstream commit
94dad6bed3c86c00050bf7c2b2ad6b630facae31 ]
For UARTs, the local pull-ups should be on the RX pin, not the TX pin.
UARTs transmit active-low, so a disconnected RX pin should be pulled
high instead of left floating to prevent noise being interpreted as
transmissions.
This gets rid of bogus sysrq events when the UART console is not
connected.
Fixes:
52e02d377a72 ("arm64: dts: rockchip: add core dtsi file for RK3328 SoCs")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20201204064805.6480-1-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Changzhong [Fri, 4 Dec 2020 08:33:25 +0000 (16:33 +0800)]
soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe()
[ Upstream commit
c2867b2e710fc85bb39c6f6e5948450c48e8a33e ]
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes:
e943c43b32ce ("PM: AVS: rockchip-io: Move the driver to the rockchip specific drivers")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1607070805-33038-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yu Kuai [Thu, 19 Nov 2020 01:12:19 +0000 (09:12 +0800)]
pinctrl: falcon: add missing put_device() call in pinctrl_falcon_probe()
[ Upstream commit
89cce2b3f247a434ee174ab6803698041df98014 ]
if of_find_device_by_node() succeed, pinctrl_falcon_probe() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.
Fixes:
e316cb2b16bb ("OF: pinctrl: MIPS: lantiq: adds support for FALCON SoC")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20201119011219.2248232-1-yukuai3@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrii Nakryiko [Thu, 3 Dec 2020 23:54:40 +0000 (15:54 -0800)]
selftests/bpf: Fix invalid use of strncat in test_sockmap
[ Upstream commit
eceae70bdeaeb6b8ceb662983cf663ff352fbc96 ]
strncat()'s third argument is how many bytes will be added *in addition* to
already existing bytes in destination. Plus extra zero byte will be added
after that. So existing use in test_sockmap has many opportunities to overflow
the string and cause memory corruptions. And in this case, GCC complains for
a good reason.
Fixes:
16962b2404ac ("bpf: sockmap, add selftests")
Fixes:
73563aa3d977 ("selftests/bpf: test_sockmap, print additional test options")
Fixes:
1ade9abadfca ("bpf: test_sockmap, add options for msg_pop_data() helper")
Fixes:
463bac5f1ca7 ("bpf, selftests: Add test for ktls with skb bpf ingress policy")
Fixes:
e9dd904708c4 ("bpf: add tls support for testing in test_sockmap")
Fixes:
753fb2ee0934 ("bpf: sockmap, add msg_peek tests to test_sockmap")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203235440.2302137-2-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrii Nakryiko [Thu, 3 Dec 2020 20:46:21 +0000 (12:46 -0800)]
bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address()
[ Upstream commit
12cc126df82c96c89706aa207ad27c56f219047c ]
__module_address() needs to be called with preemption disabled or with
module_mutex taken. preempt_disable() is enough for read-only uses, which is
what this fix does. Also, module_put() does internal check for NULL, so drop
it as well.
Fixes:
a38d1107f937 ("bpf: support raw tracepoints in modules")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-2-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mauro Carvalho Chehab [Wed, 2 Dec 2020 08:17:32 +0000 (09:17 +0100)]
scripts: kernel-doc: fix parsing function-like typedefs
[ Upstream commit
7d2c6b1edf790d96e9017a0b27be2425e1af1532 ]
Changeset
6b80975c6308 ("scripts: kernel-doc: fix typedef parsing")
added support for things like:
typedef unsigned long foo();
However, it caused a regression on this prototype:
typedef bool v4l2_check_dv_timings_fnc(const struct v4l2_dv_timings *t, void *handle);
This is only noticed after adding a patch that checks if the
kernel-doc identifier matches the typedef:
./scripts/kernel-doc -none $(git grep '^.. kernel-doc::' Documentation/ |cut -d ' ' -f 3|sort|uniq) 2>&1|grep expecting
include/media/v4l2-dv-timings.h:38: warning: expecting prototype for typedef v4l2_check_dv_timings_fnc. Prototype was for typedef nc instead
The problem is that, with the new parsing logic, it is not
checking for complete words at the type part.
Fix it by adding a \b at the end of each type word at the
regex.
fixes:
6b80975c6308 ("scripts: kernel-doc: fix typedef parsing")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/218ff56dcb8e73755005d3fb64586eb1841a276b.1606896997.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Claudiu Beznea [Wed, 2 Dec 2020 09:57:05 +0000 (11:57 +0200)]
ARM: dts: at91: sama5d2: map securam as device
[ Upstream commit
9b5dcc8d427e2bcb84c49eb03ffefe11e7537a55 ]
Due to strobe signal not being propagated from CPU to securam
the securam needs to be mapped as device or strongly ordered memory
to work properly. Otherwise, updating to one offset may affect
the adjacent locations in securam.
Fixes:
d4ce5f44d4409 ("ARM: dts: at91: sama5d2: Add securam node")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/1606903025-14197-3-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Claudiu Beznea [Wed, 2 Dec 2020 09:57:04 +0000 (11:57 +0200)]
ARM: dts: at91: sam9x60ek: remove bypass property
[ Upstream commit
ab8a9bb41b2c330a0b280280bf37b6f3b1dd1e58 ]
atmel,osc-bypass property sets the bit 1 at main oscillator register.
On SAM9X60 this bit is not valid according to datasheet (chapter
28.16.9 PMC Clock Generator Main Oscillator Register).
Fixes:
1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Marco Cardellini <marco.cardellini@microchip.com>
Link: https://lore.kernel.org/r/1606903025-14197-2-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Toke Høiland-Jørgensen [Thu, 3 Dec 2020 09:33:06 +0000 (10:33 +0100)]
libbpf: Sanitise map names before pinning
[ Upstream commit
9cf309c56f7910a81fbe053b6f11c3b1f0987b12 ]
When we added sanitising of map names before loading programs to libbpf, we
still allowed periods in the name. While the kernel will accept these for
the map names themselves, they are not allowed in file names when pinning
maps. This means that bpf_object__pin_maps() will fail if called on an
object that contains internal maps (such as sections .rodata).
Fix this by replacing periods with underscores when constructing map pin
paths. This only affects the paths generated by libbpf when
bpf_object__pin_maps() is called with a path argument. Any pin paths set
by bpf_map__set_pin_path() are unaffected, and it will still be up to the
caller to avoid invalid characters in those.
Fixes:
113e6b7e15e2 ("libbpf: Sanitise internal map names so they are not rejected by the kernel")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201203093306.107676-1-toke@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lars-Peter Clausen [Tue, 17 Nov 2020 10:37:50 +0000 (11:37 +0100)]
iio: hrtimer-trigger: Mark hrtimer to expire in hard interrupt context
[ Upstream commit
0178297c1e6898e2197fe169ef3be723e019b971 ]
On PREEMPT_RT enabled kernels unmarked hrtimers are moved into soft
interrupt expiry mode by default.
The IIO hrtimer-trigger needs to run in hard interrupt context since it
will end up calling generic_handle_irq() which has the requirement to run
in hard interrupt context.
Explicitly specify that the timer needs to run in hard interrupt context by
using the HRTIMER_MODE_REL_HARD flag.
Fixes:
f5c2f0215e36 ("hrtimer: Move unmarked hrtimers to soft interrupt expiry on RT")
Reported-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20201117103751.16131-1-lars@metafoo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Collingbourne [Thu, 3 Dec 2020 07:51:10 +0000 (23:51 -0800)]
arm64: mte: fix prctl(PR_GET_TAGGED_ADDR_CTRL) if TCF0=NONE
[ Upstream commit
929c1f3384d7e5cd319d03242cb925c3f91236f7 ]
Previously we were always returning a tag inclusion mask of zero via
PR_GET_TAGGED_ADDR_CTRL if TCF0 was set to NONE. Fix it by making
the code for the NONE case match the others.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Link: https://linux-review.googlesource.com/id/Iefbea66cf7d2b4c80b82f9639b9ea7f33f7fac53
Fixes:
af5ce95282dc ("arm64: mte: Allow user control of the generated random tags via prctl()")
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20201203075110.2781021-1-pcc@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kefeng Wang [Wed, 28 Oct 2020 13:12:30 +0000 (21:12 +0800)]
clocksource/drivers/riscv: Make RISCV_TIMER depends on RISCV_SBI
[ Upstream commit
ab3105446f1ec4e98fadfc998ee24feec271c16c ]
The riscv timer is set via SBI timer call, let's make RISCV_TIMER
depends on RISCV_SBI, and it also fixes some build issue.
Fixes:
d5be89a8d118 ("RISC-V: Resurrect the MMIO timer implementation for M-mode systems")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20201028131230.72907-1-wangkefeng.wang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Lezcano [Wed, 25 Nov 2020 10:23:45 +0000 (11:23 +0100)]
clocksource/drivers/ingenic: Fix section mismatch
[ Upstream commit
5bd7cb29eceb52e4b108917786fdbf2a2c2048ef ]
The function ingenic_tcu_get_clock() is annotated for the __init
section but it is actually called from the online cpu callback.
That will lead to a crash if a CPU is hotplugged after boot time.
Remove the __init annotation for the ingenic_tcu_get_clock()
function.
Fixes:
f19d838d08fc (clocksource/drivers/ingenic: Add high resolution timer support for SMP/SMT)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Link: https://lore.kernel.org/r/20201125102346.1816310-1-daniel.lezcano@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yu Kuai [Mon, 16 Nov 2020 13:51:23 +0000 (21:51 +0800)]
clocksource/drivers/cadence_ttc: Fix memory leak in ttc_setup_clockevent()
[ Upstream commit
eee422c46e6840a81c9db18a497b74387a557b29 ]
If clk_notifier_register() failed, ttc_setup_clockevent() will return
without freeing 'ttcce', which will leak memory.
Fixes:
70504f311d4b ("clocksource/drivers/cadence_ttc: Convert init function to return error")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20201116135123.2164033-1-yukuai3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Wed, 11 Nov 2020 06:47:06 +0000 (14:47 +0800)]
clocksource/drivers/orion: Add missing clk_disable_unprepare() on error path
[ Upstream commit
c1e6cad00aa2f17845e7270e38ff3cc82c7b022a ]
After calling clk_prepare_enable(), clk_disable_unprepare() need
be called on error path.
Fixes:
fbe4b3566ddc ("clocksource/drivers/orion: Convert init function...")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20201111064706.3397156-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Athira Rajeev [Thu, 26 Nov 2020 16:54:40 +0000 (11:54 -0500)]
powerpc/perf: Fix the PMU group constraints for threshold events in power10
[ Upstream commit
0263bbb377af0c2d38bc8b2ad2ff147e240094de ]
The PMU group constraints mask for threshold events covers
all thresholding bits which includes threshold control value
(start/stop), select value as well as thresh_cmp value (MMCRA[9:18].
In power9, thresh_cmp bits were part of the event code. But in case
of power10, thresh_cmp bits are not part of event code due to
inclusion of MMCR3 bits. Hence thresh_cmp is not valid for
group constraints for power10.
Fix the PMU group constraints checking for threshold events in
power10 by using constraint mask and value for only threshold control
and select bits.
Fixes:
a64e697cef23 ("powerpc/perf: power10 Performance Monitoring support")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1606409684-1589-4-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Athira Rajeev [Thu, 26 Nov 2020 16:54:39 +0000 (11:54 -0500)]
powerpc/perf: Update the PMU group constraints for l2l3 events in power10
[ Upstream commit
e924be7b0b0d1f37d0509c854a92c7a71e3cdfe7 ]
In Power9, L2/L3 bus events are always available as a
"bank" of 4 events. To obtain the counts for any of the
l2/l3 bus events in a given bank, the user will have to
program PMC4 with corresponding l2/l3 bus event for that
bank.
Commit
59029136d750 ("powerpc/perf: Add constraints for power9 l2/l3 bus events")
enforced this rule in Power9. But this is not valid for
Power10, since in Power10 Monitor Mode Control Register2
(MMCR2) has bits to configure l2/l3 event bits. Hence remove
this PMC4 constraint check from power10.
Since the l2/l3 bits in MMCR2 are not per-pmc, patch handles
group constrints checks for l2/l3 bits in MMCR2.
Fixes:
a64e697cef23 ("powerpc/perf: power10 Performance Monitoring support")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1606409684-1589-3-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>