Samuel Holland [Sun, 29 Dec 2019 02:59:22 +0000 (20:59 -0600)]
clk: sunxi-ng: h6-r: Fix AR100/R_APB2 parent order
[ Upstream commit
0c545240aebc2ccb8f661dc54283a14d64659804 ]
According to the BSP source code, both the AR100 and R_APB2 clocks have
PLL_PERIPH0 as mux index 3, not 2 as it was on previous chips. The pre-
divider used for PLL_PERIPH0 should be changed to index 3 to match.
This was verified by running a rough benchmark on the AR100 with various
clock settings:
| mux | pre-divider | iterations/second | clock source |
|=====|=============|===================|==============|
| 0 | 0 | 19033 (stable) | osc24M |
| 2 | 5 | 11466 (unstable) | iosc/osc16M |
| 2 | 17 | 11422 (unstable) | iosc/osc16M |
| 3 | 5 | 85338 (stable) | pll-periph0 |
| 3 | 17 | 27167 (stable) | pll-periph0 |
The relative performance numbers all match up (with pll-periph0 running
at its default 600MHz).
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Samuel Holland [Sun, 29 Dec 2019 02:59:20 +0000 (20:59 -0600)]
clk: sunxi-ng: sun8i-r: Fix divider on APB0 clock
[ Upstream commit
47d64fef1f3ffbdf960d3330b9865fc9f12fdf84 ]
According to the BSP source code, the APB0 clock on the H3 and H5 has a
normal M divider, not a power-of-two divider. This matches the hardware
in the A83T (as described in both the BSP source code and the manual).
Since the A83T and H3/A64 clocks are actually the same, we can merge the
definitions.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mathieu Desnoyers [Wed, 11 Dec 2019 16:17:12 +0000 (11:17 -0500)]
rseq: Unregister rseq for clone CLONE_VM
[ Upstream commit
463f550fb47bede3a5d7d5177f363a6c3b45d50b ]
It has been reported by Google that rseq is not behaving properly
with respect to clone when CLONE_VM is used without CLONE_THREAD.
It keeps the prior thread's rseq TLS registered when the TLS of the
thread has moved, so the kernel can corrupt the TLS of the parent.
The approach of clearing the per task-struct rseq registration
on clone with CLONE_THREAD flag is incomplete. It does not cover
the use-case of clone with CLONE_VM set, but without CLONE_THREAD.
Here is the rationale for unregistering rseq on clone with CLONE_VM
flag set:
1) CLONE_THREAD requires CLONE_SIGHAND, which requires CLONE_VM to be
set. Therefore, just checking for CLONE_VM covers all CLONE_THREAD
uses. There is no point in checking for both CLONE_THREAD and
CLONE_VM,
2) There is the possibility of an unlikely scenario where CLONE_SETTLS
is used without CLONE_VM. In order to be an issue, it would require
that the rseq TLS is in a shared memory area.
I do not plan on adding CLONE_SETTLS to the set of clone flags which
unregister RSEQ, because it would require that we also unregister RSEQ
on set_thread_area(2) and arch_prctl(2) ARCH_SET_FS for completeness.
So rather than doing a partial solution, it appears better to let
user-space explicitly perform rseq unregistration across clone if
needed in scenarios where CLONE_VM is not set.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191211161713.4490-3-mathieu.desnoyers@efficios.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hewenliang [Mon, 9 Dec 2019 06:35:49 +0000 (01:35 -0500)]
tools lib traceevent: Fix memory leakage in filter_event
[ Upstream commit
f84ae29a6169318f9c929720c49d96323d2bbab9 ]
It is necessary to call free_arg(arg) when add_filter_type() returns NULL
in filter_event().
Signed-off-by: Hewenliang <hewenliang4@huawei.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Feilong Lin <linfeilong@huawei.com>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Link: http://lore.kernel.org/lkml/20191209063549.59941-1-hewenliang4@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dave Gerlach [Thu, 12 Dec 2019 04:03:14 +0000 (22:03 -0600)]
soc: ti: wkup_m3_ipc: Fix race condition with rproc_boot
[ Upstream commit
03729cfa0d543bc996bf959e762ec999afc8f3d2 ]
Any user of wkup_m3_ipc calls wkup_m3_ipc_get to get a handle and this
checks the value of the static variable m3_ipc_state to see if the
wkup_m3 is ready. Currently this is populated during probe before
rproc_boot has been called, meaning there is a window of time that
wkup_m3_ipc_get can return a valid handle but the wkup_m3 itself is not
ready, leading to invalid IPC calls to the wkup_m3 and system
instability.
To avoid this, move the population of the m3_ipc_state variable until
after rproc_boot has succeeded to guarantee a valid and usable handle
is always returned.
Reported-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kishon Vijay Abraham I [Tue, 17 Dec 2019 08:51:24 +0000 (14:21 +0530)]
ARM: dts: beagle-x15-common: Model 5V0 regulator
[ Upstream commit
e17e7c498d4f734df93c300441e100818ed58168 ]
On am57xx-beagle-x15, 5V0 is connected to P16, P17, P18 and P19
connectors. On am57xx-evm, 5V0 regulator is used to get 3V6 regulator
which is connected to the COMQ port. Model 5V0 regulator here in order
for it to be used in am57xx-evm to model 3V6 regulator.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kishon Vijay Abraham I [Tue, 17 Dec 2019 08:51:22 +0000 (14:21 +0530)]
ARM: dts: am57xx-beagle-x15/am57xx-idk: Remove "gpios" for endpoint dt nodes
[ Upstream commit
81cc0877840f72210e809bbedd6346d686560fc1 ]
PERST# line in the PCIE connector is driven by the host mode and not
EP mode. The gpios property here is used for driving the PERST# line.
Remove gpios property from all endpoint device tree nodes.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Szyprowski [Wed, 11 Dec 2019 14:52:17 +0000 (15:52 +0100)]
ARM: dts: sun8i: a83t: Correct USB3503 GPIOs polarity
[ Upstream commit
1c226017d3ec93547b58082bdf778d9db7401c95 ]
Current USB3503 driver ignores GPIO polarity and always operates as if the
GPIO lines were flagged as ACTIVE_HIGH. Fix the polarity for the existing
USB3503 chip applications to match the chip specification and common
convention for naming the pins. The only pin, which has to be ACTIVE_LOW
is the reset pin. The remaining are ACTIVE_HIGH. This change allows later
to fix the USB3503 driver to properly use generic GPIO bindings and read
polarity from DT.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guillaume La Roque [Thu, 5 Dec 2019 13:19:00 +0000 (14:19 +0100)]
arm64: dts: meson-sm1-sei610: add gpio bluetooth interrupt
[ Upstream commit
30388cc075720aa0af4f2cb5933afa1f8f39d313 ]
add gpio irq to support interrupt trigger mode.
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yunhao Tian [Mon, 25 Nov 2019 12:58:32 +0000 (20:58 +0800)]
clk: sunxi-ng: v3s: Fix incorrect number of hw_clks.
[ Upstream commit
4ff40d140e2a2060ef6051800a4a9eab07624f42 ]
The hws field of sun8i_v3s_hw_clks has only 74
members. However, the number specified by CLK_NUMBER
is 77 (= CLK_I2S0 + 1). This leads to runtime segmentation
fault that is not always reproducible.
This patch fixes the problem by specifying correct clock number.
Signed-off-by: Yunhao Tian <18373444@buaa.edu.cn>
[Maxime: Also remove the CLK_NUMBER definition]
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michal Koutný [Thu, 9 Jan 2020 15:05:59 +0000 (16:05 +0100)]
cgroup: Prevent double killing of css when enabling threaded cgroup
commit
3bc0bb36fa30e95ca829e9cf480e1ef7f7638333 upstream.
The test_cgcore_no_internal_process_constraint_on_threads selftest when
running with subsystem controlling noise triggers two warnings:
> [ 597.443115] WARNING: CPU: 1 PID: 28167 at kernel/cgroup/cgroup.c:3131 cgroup_apply_control_enable+0xe0/0x3f0
> [ 597.443413] WARNING: CPU: 1 PID: 28167 at kernel/cgroup/cgroup.c:3177 cgroup_apply_control_disable+0xa6/0x160
Both stem from a call to cgroup_type_write. The first warning was also
triggered by syzkaller.
When we're switching cgroup to threaded mode shortly after a subsystem
was disabled on it, we can see the respective subsystem css dying there.
The warning in cgroup_apply_control_enable is harmless in this case
since we're not adding new subsys anyway.
The warning in cgroup_apply_control_disable indicates an attempt to kill
css of recently disabled subsystem repeatedly.
The commit prevents these situations by making cgroup_type_write wait
for all dying csses to go away before re-applying subtree controls.
When at it, the locations of WARN_ON_ONCE calls are moved so that
warning is triggered only when we are about to misuse the dying css.
Reported-by: syzbot+5493b2a54d31d6aea629@syzkaller.appspotmail.com
Reported-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Wed, 15 Jan 2020 17:49:04 +0000 (20:49 +0300)]
Bluetooth: Fix race condition in hci_release_sock()
commit
11eb85ec42dc8c7a7ec519b90ccf2eeae9409de8 upstream.
Syzbot managed to trigger a use after free "KASAN: use-after-free Write
in hci_sock_bind". I have reviewed the code manually and one possibly
cause I have found is that we are not holding lock_sock(sk) when we do
the hci_dev_put(hdev) in hci_sock_release(). My theory is that the bind
and the release are racing against each other which results in this use
after free.
Reported-by: syzbot+eba992608adf3d796bcc@syzkaller.appspotmail.com
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhenzhong Duan [Mon, 13 Jan 2020 03:48:42 +0000 (11:48 +0800)]
ttyprintk: fix a potential deadlock in interrupt context issue
commit
9a655c77ff8fc65699a3f98e237db563b37c439b upstream.
tpk_write()/tpk_close() could be interrupted when holding a mutex, then
in timer handler tpk_write() may be called again trying to acquire same
mutex, lead to deadlock.
Google syzbot reported this issue with CONFIG_DEBUG_ATOMIC_SLEEP
enabled:
BUG: sleeping function called from invalid context at
kernel/locking/mutex.c:938
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/1
1 lock held by swapper/1/0:
...
Call Trace:
<IRQ>
dump_stack+0x197/0x210
___might_sleep.cold+0x1fb/0x23e
__might_sleep+0x95/0x190
__mutex_lock+0xc5/0x13c0
mutex_lock_nested+0x16/0x20
tpk_write+0x5d/0x340
resync_tnc+0x1b6/0x320
call_timer_fn+0x1ac/0x780
run_timer_softirq+0x6c3/0x1790
__do_softirq+0x262/0x98c
irq_exit+0x19b/0x1e0
smp_apic_timer_interrupt+0x1a3/0x610
apic_timer_interrupt+0xf/0x20
</IRQ>
See link https://syzkaller.appspot.com/bug?extid=
2eeef62ee31f9460ad65 for
more details.
Fix it by using spinlock in process context instead of mutex and having
interrupt disabled in critical section.
Reported-by: syzbot+2eeef62ee31f9460ad65@syzkaller.appspotmail.com
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200113034842.435-1-zhenzhong.duan@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tetsuo Handa [Thu, 2 Jan 2020 03:53:49 +0000 (12:53 +0900)]
tomoyo: Use atomic_t for statistics counter
commit
a8772fad0172aeae339144598b809fd8d4823331 upstream.
syzbot is reporting that there is a race at tomoyo_stat_update() [1].
Although it is acceptable to fail to track exact number of times policy
was updated, convert to atomic_t because this is not a hot path.
[1] https://syzkaller.appspot.com/bug?id=
a4d7b973972eeed410596e6604580e0133b0fc04
Reported-by: syzbot <syzbot+efea72d4a0a1d03596cd@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans Verkuil [Tue, 12 Nov 2019 09:22:28 +0000 (10:22 +0100)]
media: dvb-usb/dvb-usb-urb.c: initialize actlen to 0
commit
569bc8d6a6a50acb5fcf07fb10b8d2d461fdbf93 upstream.
This fixes a syzbot failure since actlen could be uninitialized,
but it was still used.
Syzbot link:
https://syzkaller.appspot.com/bug?extid=
6bf9606ee955b646c0e1
Reported-and-tested-by: syzbot+6bf9606ee955b646c0e1@syzkaller.appspotmail.com
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans Verkuil [Tue, 12 Nov 2019 09:22:24 +0000 (10:22 +0100)]
media: gspca: zero usb_buf
commit
de89d0864f66c2a1b75becfdd6bf3793c07ce870 upstream.
Allocate gspca_dev->usb_buf with kzalloc instead of kmalloc to
ensure it is property zeroed. This fixes various syzbot errors
about uninitialized data.
Syzbot links:
https://syzkaller.appspot.com/bug?extid=
32310fc2aea76898d074
https://syzkaller.appspot.com/bug?extid=
99706d6390be1ac542a2
https://syzkaller.appspot.com/bug?extid=
64437af5c781a7f0e08e
Reported-and-tested-by: syzbot+32310fc2aea76898d074@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+99706d6390be1ac542a2@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+64437af5c781a7f0e08e@syzkaller.appspotmail.com
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Young [Sun, 10 Nov 2019 10:25:13 +0000 (11:25 +0100)]
media: vp7045: do not read uninitialized values if usb transfer fails
commit
26cff637121d8bb866ebd6515c430ac890e6ec80 upstream.
It is not a fatal error if reading the mac address or the remote control
decoder state fails.
Reported-by: syzbot+ec869945d3dde5f33b43@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Young [Sun, 10 Nov 2019 10:15:37 +0000 (11:15 +0100)]
media: af9005: uninitialized variable printked
commit
51d0c99b391f0cac61ad7b827c26f549ee55672c upstream.
If usb_bulk_msg() fails, actual_length can be uninitialized.
Reported-by: syzbot+9d42b7773d2fecd983ab@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Young [Sun, 10 Nov 2019 10:04:40 +0000 (11:04 +0100)]
media: digitv: don't continue if remote control state can't be read
commit
eecc70d22ae51225de1ef629c1159f7116476b2e upstream.
This results in an uninitialized variable read.
Reported-by: syzbot+6bf9606ee955b646c0e1@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Thu, 12 Dec 2019 10:30:03 +0000 (11:30 +0100)]
reiserfs: Fix memory leak of journal device string
commit
5474ca7da6f34fa95e82edc747d5faa19cbdfb5c upstream.
When a filesystem is mounted with jdev mount option, we store the
journal device name in an allocated string in superblock. However we
fail to ever free that string. Fix it.
Reported-by: syzbot+1c6756baf4b16b94d2a6@syzkaller.appspotmail.com
Fixes:
c3aa077648e1 ("reiserfs: Properly display mount options in /proc/mounts")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Fri, 31 Jan 2020 06:11:07 +0000 (22:11 -0800)]
mm/mempolicy.c: fix out of bounds write in mpol_parse_str()
commit
c7a91bc7c2e17e0a9c8b9745a2cb118891218fd1 upstream.
What we are trying to do is change the '=' character to a NUL terminator
and then at the end of the function we restore it back to an '='. The
problem is there are two error paths where we jump to the end of the
function before we have replaced the '=' with NUL.
We end up putting the '=' in the wrong place (possibly one element
before the start of the buffer).
Link: http://lkml.kernel.org/r/20200115055426.vdjwvry44nfug7yy@kili.mountain
Reported-by: syzbot+e64a13c5369a194d67df@syzkaller.appspotmail.com
Fixes:
095f1fc4ebf3 ("mempolicy: rework shmem mpol parsing and display")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Dmitry Vyukov <dvyukov@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dirk Behme [Tue, 21 Jan 2020 15:54:39 +0000 (16:54 +0100)]
arm64: kbuild: remove compressed images on 'make ARCH=arm64 (dist)clean'
commit
d7bbd6c1b01cb5dd13c245d4586a83145c1d5f52 upstream.
Since v4.3-rc1 commit
0723c05fb75e44 ("arm64: enable more compressed
Image formats"), it is possible to build Image.{bz2,lz4,lzma,lzo}
AArch64 images. However, the commit missed adding support for removing
those images on 'make ARCH=arm64 (dist)clean'.
Fix this by adding them to the target list.
Make sure to match the order of the recipes in the makefile.
Cc: stable@vger.kernel.org # v4.3+
Fixes:
0723c05fb75e44 ("arm64: enable more compressed Image formats")
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vitaly Chikunov [Tue, 24 Dec 2019 17:20:29 +0000 (20:20 +0300)]
tools lib: Fix builds when glibc contains strlcpy()
commit
6c4798d3f08b81c2c52936b10e0fa872590c96ae upstream.
Disable a couple of compilation warnings (which are treated as errors)
on strlcpy() definition and declaration, allowing users to compile perf
and kernel (objtool) when:
1. glibc have strlcpy() (such as in ALT Linux since 2004) objtool and
perf build fails with this (in gcc):
In file included from exec-cmd.c:3:
tools/include/linux/string.h:20:15: error: redundant redeclaration of ‘strlcpy’ [-Werror=redundant-decls]
20 | extern size_t strlcpy(char *dest, const char *src, size_t size);
2. clang ignores `-Wredundant-decls', but produces another warning when
building perf:
CC util/string.o
../lib/string.c:99:8: error: attribute declaration must precede definition [-Werror,-Wignored-attributes]
size_t __weak strlcpy(char *dest, const char *src, size_t size)
../../tools/include/linux/compiler.h:66:34: note: expanded from macro '__weak'
# define __weak __attribute__((weak))
/usr/include/bits/string_fortified.h:151:8: note: previous definition is here
__NTH (strlcpy (char *__restrict __dest, const char *__restrict __src,
Committer notes:
The
#pragma GCC diagnostic
directive was introduced in gcc 4.6, so check for that as well.
Fixes: ce99091 ("perf tools: Move strlcpy() from perf to tools/lib/string.c")
Fixes: 0215d59 ("tools lib: Reinstate strlcpy() header guard with __UCLIBC__")
Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=118481
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Dmitry Levin <ldv@altlinux.org>
Cc: Dmitry Levin <ldv@altlinux.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: kbuild test robot <lkp@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Cc: Vineet Gupta <vineet.gupta1@synopsys.com>
Link: http://lore.kernel.org/lkml/20191224172029.19690-1-vt@altlinux.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chanwoo Choi [Tue, 5 Nov 2019 09:18:03 +0000 (18:18 +0900)]
PM / devfreq: Add new name attribute for sysfs
commit
2fee1a7cc6b1ce6634bb0f025be2c94a58dfa34d upstream.
The commit
4585fbcb5331 ("PM / devfreq: Modify the device name as devfreq(X) for
sysfs") changed the node name to devfreq(x). After this commit, it is not
possible to get the device name through /sys/class/devfreq/devfreq(X)/*.
Add new name attribute in order to get device name.
Cc: stable@vger.kernel.org
Fixes:
4585fbcb5331 ("PM / devfreq: Modify the device name as devfreq(X) for sysfs")
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andres Freund [Thu, 9 Jan 2020 04:30:30 +0000 (20:30 -0800)]
perf c2c: Fix return type for histogram sorting comparision functions
commit
c1c8013ec34d7163431d18367808ea40b2e305f8 upstream.
Commit
722ddfde366f ("perf tools: Fix time sorting") changed - correctly
so - hist_entry__sort to return int64. Unfortunately several of the
builtin-c2c.c comparison routines only happened to work due the cast
caused by the wrong return type.
This causes meaningless ordering of both the cacheline list, and the
cacheline details page. E.g a simple:
perf c2c record -a sleep 3
perf c2c report
will result in cacheline table like
=================================================
Shared Data Cache Line Table
=================================================
#
# ------- Cacheline ---------- Total Tot - LLC Load Hitm - - Store Reference - - Load Dram - LLC Total - Core Load Hit - - LLC Load Hit -
# Index Address Node PA cnt records Hitm Total Lcl Rmt Total L1Hit L1Miss Lcl Rmt Ld Miss Loads FB L1 L2 Llc Rmt
# ..... .............. .... ...... ....... ...... ..... ..... ... .... ..... ...... ...... .... ...... ..... ..... ..... ... .... .......
0 0x7f0d27ffba00 N/A 0 52 0.12% 13 6 7 12 12 0 0 7 14 40 4 16 0 0 0
1 0x7f0d27ff61c0 N/A 0 6353 14.04% 1475 801 674 779 779 0 0 718 1392 5574 1299 1967 0 115 0
2 0x7f0d26d3ec80 N/A 0 71 0.15% 16 4 12 13 13 0 0 12 24 58 1 20 0 9 0
3 0x7f0d26d3ec00 N/A 0 98 0.22% 23 17 6 19 19 0 0 6 12 79 0 40 0 10 0
i.e. with the list not being ordered by Total Hitm.
Fixes:
722ddfde366f ("perf tools: Fix time sorting")
Signed-off-by: Andres Freund <andres@anarazel.de>
Tested-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org # v3.16+
Link: http://lore.kernel.org/lkml/20200109043030.233746-1-andres@anarazel.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Gruenbacher [Sun, 8 Dec 2019 13:12:49 +0000 (13:12 +0000)]
gfs2: Another gfs2_find_jhead fix
commit
eed0f953b90e86e765197a1dad06bb48aedc27fe upstream.
On filesystems with a block size smaller than the page size,
gfs2_find_jhead can split a page across two bios (for example, when
blocks are not allocated consecutively). When that happens, the first
bio that completes will unlock the page in its bi_end_io handler even
though the page hasn't been read completely yet. Fix that by using a
chained bio for the rest of the page.
While at it, clean up the sector calculation logic in
gfs2_log_alloc_bio. In gfs2_find_jhead, simplify the disk block and
offset calculation logic and fix a variable name.
Fixes:
f4686c26ecc3 ("gfs2: read journal in large chunks")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeff Kirsher [Sun, 5 Jan 2020 07:29:22 +0000 (23:29 -0800)]
e1000e: Revert "e1000e: Make watchdog use delayed work"
[ Upstream commit
d5ad7a6a7f3c87b278d7e4973b65682be4e588dd ]
This reverts commit
59653e6497d16f7ac1d9db088f3959f57ee8c3db.
This is due to this commit causing driver crashes and connections to
reset unexpectedly.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Duyck [Fri, 11 Oct 2019 15:34:59 +0000 (08:34 -0700)]
e1000e: Drop unnecessary __E1000_DOWN bit twiddling
[ Upstream commit
daee5598e491d8d3979bd4ad6c447d89ce57b446 ]
Since we no longer check for __E1000_DOWN in e1000e_close we can drop the
spot where we were restoring the bit. This saves us a bit of unnecessary
complexity.
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiaochen Shen [Wed, 8 Jan 2020 16:28:04 +0000 (00:28 +0800)]
x86/resctrl: Fix use-after-free due to inaccurate refcount of rdtgroup
[ Upstream commit
074fadee59ee7a9d2b216e9854bd4efb5dad679f ]
There is a race condition in the following scenario which results in an
use-after-free issue when reading a monitoring file and deleting the
parent ctrl_mon group concurrently:
Thread 1 calls atomic_inc() to take refcount of rdtgrp and then calls
kernfs_break_active_protection() to drop the active reference of kernfs
node in rdtgroup_kn_lock_live().
In Thread 2, kernfs_remove() is a blocking routine. It waits on all sub
kernfs nodes to drop the active reference when removing all subtree
kernfs nodes recursively. Thread 2 could block on kernfs_remove() until
Thread 1 calls kernfs_break_active_protection(). Only after
kernfs_remove() completes the refcount of rdtgrp could be trusted.
Before Thread 1 calls atomic_inc() and kernfs_break_active_protection(),
Thread 2 could call kfree() when the refcount of rdtgrp (sentry) is 0
instead of 1 due to the race.
In Thread 1, in rdtgroup_kn_unlock(), referring to earlier rdtgrp memory
(rdtgrp->waitcount) which was already freed in Thread 2 results in
use-after-free issue.
Thread 1 (rdtgroup_mondata_show) Thread 2 (rdtgroup_rmdir)
-------------------------------- -------------------------
rdtgroup_kn_lock_live
/*
* kn active protection until
* kernfs_break_active_protection(kn)
*/
rdtgrp = kernfs_to_rdtgroup(kn)
rdtgroup_kn_lock_live
atomic_inc(&rdtgrp->waitcount)
mutex_lock
rdtgroup_rmdir_ctrl
free_all_child_rdtgrp
/*
* sentry->waitcount should be 1
* but is 0 now due to the race.
*/
kfree(sentry)*[1]
/*
* Only after kernfs_remove()
* completes, the refcount of
* rdtgrp could be trusted.
*/
atomic_inc(&rdtgrp->waitcount)
/* kn->active-- */
kernfs_break_active_protection(kn)
rdtgroup_ctrl_remove
rdtgrp->flags = RDT_DELETED
/*
* Blocking routine, wait for
* all sub kernfs nodes to drop
* active reference in
* kernfs_break_active_protection.
*/
kernfs_remove(rdtgrp->kn)
rdtgroup_kn_unlock
mutex_unlock
atomic_dec_and_test(
&rdtgrp->waitcount)
&& (flags & RDT_DELETED)
kernfs_unbreak_active_protection(kn)
kfree(rdtgrp)
mutex_lock
mon_event_read
rdtgroup_kn_unlock
mutex_unlock
/*
* Use-after-free: refer to earlier rdtgrp
* memory which was freed in [1].
*/
atomic_dec_and_test(&rdtgrp->waitcount)
&& (flags & RDT_DELETED)
/* kn->active++ */
kernfs_unbreak_active_protection(kn)
kfree(rdtgrp)
Fix it by moving free_all_child_rdtgrp() to after kernfs_remove() in
rdtgroup_rmdir_ctrl() to ensure it has the accurate refcount of rdtgrp.
Fixes:
f3cbeacaa06e ("x86/intel_rdt/cqm: Add rmdir support")
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1578500886-21771-3-git-send-email-xiaochen.shen@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiaochen Shen [Wed, 8 Jan 2020 16:28:03 +0000 (00:28 +0800)]
x86/resctrl: Fix use-after-free when deleting resource groups
[ Upstream commit
b8511ccc75c033f6d54188ea4df7bf1e85778740 ]
A resource group (rdtgrp) contains a reference count (rdtgrp->waitcount)
that indicates how many waiters expect this rdtgrp to exist. Waiters
could be waiting on rdtgroup_mutex or some work sitting on a task's
workqueue for when the task returns from kernel mode or exits.
The deletion of a rdtgrp is intended to have two phases:
(1) while holding rdtgroup_mutex the necessary cleanup is done and
rdtgrp->flags is set to RDT_DELETED,
(2) after releasing the rdtgroup_mutex, the rdtgrp structure is freed
only if there are no waiters and its flag is set to RDT_DELETED. Upon
gaining access to rdtgroup_mutex or rdtgrp, a waiter is required to check
for the RDT_DELETED flag.
When unmounting the resctrl file system or deleting ctrl_mon groups,
all of the subdirectories are removed and the data structure of rdtgrp
is forcibly freed without checking rdtgrp->waitcount. If at this point
there was a waiter on rdtgrp then a use-after-free issue occurs when the
waiter starts running and accesses the rdtgrp structure it was waiting
on.
See kfree() calls in [1], [2] and [3] in these two call paths in
following scenarios:
(1) rdt_kill_sb() -> rmdir_all_sub() -> free_all_child_rdtgrp()
(2) rdtgroup_rmdir() -> rdtgroup_rmdir_ctrl() -> free_all_child_rdtgrp()
There are several scenarios that result in use-after-free issue in
following:
Scenario 1:
-----------
In Thread 1, rdtgroup_tasks_write() adds a task_work callback
move_myself(). If move_myself() is scheduled to execute after Thread 2
rdt_kill_sb() is finished, referring to earlier rdtgrp memory
(rdtgrp->waitcount) which was already freed in Thread 2 results in
use-after-free issue.
Thread 1 (rdtgroup_tasks_write) Thread 2 (rdt_kill_sb)
------------------------------- ----------------------
rdtgroup_kn_lock_live
atomic_inc(&rdtgrp->waitcount)
mutex_lock
rdtgroup_move_task
__rdtgroup_move_task
/*
* Take an extra refcount, so rdtgrp cannot be freed
* before the call back move_myself has been invoked
*/
atomic_inc(&rdtgrp->waitcount)
/* Callback move_myself will be scheduled for later */
task_work_add(move_myself)
rdtgroup_kn_unlock
mutex_unlock
atomic_dec_and_test(&rdtgrp->waitcount)
&& (flags & RDT_DELETED)
mutex_lock
rmdir_all_sub
/*
* sentry and rdtgrp are freed
* without checking refcount
*/
free_all_child_rdtgrp
kfree(sentry)*[1]
kfree(rdtgrp)*[2]
mutex_unlock
/*
* Callback is scheduled to execute
* after rdt_kill_sb is finished
*/
move_myself
/*
* Use-after-free: refer to earlier rdtgrp
* memory which was freed in [1] or [2].
*/
atomic_dec_and_test(&rdtgrp->waitcount)
&& (flags & RDT_DELETED)
kfree(rdtgrp)
Scenario 2:
-----------
In Thread 1, rdtgroup_tasks_write() adds a task_work callback
move_myself(). If move_myself() is scheduled to execute after Thread 2
rdtgroup_rmdir() is finished, referring to earlier rdtgrp memory
(rdtgrp->waitcount) which was already freed in Thread 2 results in
use-after-free issue.
Thread 1 (rdtgroup_tasks_write) Thread 2 (rdtgroup_rmdir)
------------------------------- -------------------------
rdtgroup_kn_lock_live
atomic_inc(&rdtgrp->waitcount)
mutex_lock
rdtgroup_move_task
__rdtgroup_move_task
/*
* Take an extra refcount, so rdtgrp cannot be freed
* before the call back move_myself has been invoked
*/
atomic_inc(&rdtgrp->waitcount)
/* Callback move_myself will be scheduled for later */
task_work_add(move_myself)
rdtgroup_kn_unlock
mutex_unlock
atomic_dec_and_test(&rdtgrp->waitcount)
&& (flags & RDT_DELETED)
rdtgroup_kn_lock_live
atomic_inc(&rdtgrp->waitcount)
mutex_lock
rdtgroup_rmdir_ctrl
free_all_child_rdtgrp
/*
* sentry is freed without
* checking refcount
*/
kfree(sentry)*[3]
rdtgroup_ctrl_remove
rdtgrp->flags = RDT_DELETED
rdtgroup_kn_unlock
mutex_unlock
atomic_dec_and_test(
&rdtgrp->waitcount)
&& (flags & RDT_DELETED)
kfree(rdtgrp)
/*
* Callback is scheduled to execute
* after rdt_kill_sb is finished
*/
move_myself
/*
* Use-after-free: refer to earlier rdtgrp
* memory which was freed in [3].
*/
atomic_dec_and_test(&rdtgrp->waitcount)
&& (flags & RDT_DELETED)
kfree(rdtgrp)
If CONFIG_DEBUG_SLAB=y, Slab corruption on kmalloc-2k can be observed
like following. Note that "0x6b" is POISON_FREE after kfree(). The
corrupted bits "0x6a", "0x64" at offset 0x424 correspond to
waitcount member of struct rdtgroup which was freed:
Slab corruption (Not tainted): kmalloc-2k start=
ffff9504c5b0d000, len=2048
420: 6b 6b 6b 6b 6a 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkjkkkkkkkkkkk
Single bit error detected. Probably bad RAM.
Run memtest86+ or a similar memory test tool.
Next obj: start=
ffff9504c5b0d800, len=2048
000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
Slab corruption (Not tainted): kmalloc-2k start=
ffff9504c58ab800, len=2048
420: 6b 6b 6b 6b 64 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkdkkkkkkkkkkk
Prev obj: start=
ffff9504c58ab000, len=2048
000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
Fix this by taking reference count (waitcount) of rdtgrp into account in
the two call paths that currently do not do so. Instead of always
freeing the resource group it will only be freed if there are no waiters
on it. If there are waiters, the resource group will have its flags set
to RDT_DELETED.
It will be left to the waiter to free the resource group when it starts
running and finding that it was the last waiter and the resource group
has been removed (rdtgrp->flags & RDT_DELETED) since. (1) rdt_kill_sb()
-> rmdir_all_sub() -> free_all_child_rdtgrp() (2) rdtgroup_rmdir() ->
rdtgroup_rmdir_ctrl() -> free_all_child_rdtgrp()
Fixes:
f3cbeacaa06e ("x86/intel_rdt/cqm: Add rmdir support")
Fixes:
60cf5e101fd4 ("x86/intel_rdt: Add mkdir to resctrl file system")
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1578500886-21771-2-git-send-email-xiaochen.shen@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiaochen Shen [Wed, 8 Jan 2020 16:28:05 +0000 (00:28 +0800)]
x86/resctrl: Fix a deadlock due to inaccurate reference
[ Upstream commit
334b0f4e9b1b4a1d475f803419d202f6c5e4d18e ]
There is a race condition which results in a deadlock when rmdir and
mkdir execute concurrently:
$ ls /sys/fs/resctrl/c1/mon_groups/m1/
cpus cpus_list mon_data tasks
Thread 1: rmdir /sys/fs/resctrl/c1
Thread 2: mkdir /sys/fs/resctrl/c1/mon_groups/m1
3 locks held by mkdir/48649:
#0: (sb_writers#17){.+.+}, at: [<
ffffffffb4ca2aa0>] mnt_want_write+0x20/0x50
#1: (&type->i_mutex_dir_key#8/1){+.+.}, at: [<
ffffffffb4c8c13b>] filename_create+0x7b/0x170
#2: (rdtgroup_mutex){+.+.}, at: [<
ffffffffb4a4389d>] rdtgroup_kn_lock_live+0x3d/0x70
4 locks held by rmdir/48652:
#0: (sb_writers#17){.+.+}, at: [<
ffffffffb4ca2aa0>] mnt_want_write+0x20/0x50
#1: (&type->i_mutex_dir_key#8/1){+.+.}, at: [<
ffffffffb4c8c3cf>] do_rmdir+0x13f/0x1e0
#2: (&type->i_mutex_dir_key#8){++++}, at: [<
ffffffffb4c86d5d>] vfs_rmdir+0x4d/0x120
#3: (rdtgroup_mutex){+.+.}, at: [<
ffffffffb4a4389d>] rdtgroup_kn_lock_live+0x3d/0x70
Thread 1 is deleting control group "c1". Holding rdtgroup_mutex,
kernfs_remove() removes all kernfs nodes under directory "c1"
recursively, then waits for sub kernfs node "mon_groups" to drop active
reference.
Thread 2 is trying to create a subdirectory "m1" in the "mon_groups"
directory. The wrapper kernfs_iop_mkdir() takes an active reference to
the "mon_groups" directory but the code drops the active reference to
the parent directory "c1" instead.
As a result, Thread 1 is blocked on waiting for active reference to drop
and never release rdtgroup_mutex, while Thread 2 is also blocked on
trying to get rdtgroup_mutex.
Thread 1 (rdtgroup_rmdir) Thread 2 (rdtgroup_mkdir)
(rmdir /sys/fs/resctrl/c1) (mkdir /sys/fs/resctrl/c1/mon_groups/m1)
------------------------- -------------------------
kernfs_iop_mkdir
/*
* kn: "m1", parent_kn: "mon_groups",
* prgrp_kn: parent_kn->parent: "c1",
*
* "mon_groups", parent_kn->active++: 1
*/
kernfs_get_active(parent_kn)
kernfs_iop_rmdir
/* "c1", kn->active++ */
kernfs_get_active(kn)
rdtgroup_kn_lock_live
atomic_inc(&rdtgrp->waitcount)
/* "c1", kn->active-- */
kernfs_break_active_protection(kn)
mutex_lock
rdtgroup_rmdir_ctrl
free_all_child_rdtgrp
sentry->flags = RDT_DELETED
rdtgroup_ctrl_remove
rdtgrp->flags = RDT_DELETED
kernfs_get(kn)
kernfs_remove(rdtgrp->kn)
__kernfs_remove
/* "mon_groups", sub_kn */
atomic_add(KN_DEACTIVATED_BIAS, &sub_kn->active)
kernfs_drain(sub_kn)
/*
* sub_kn->active == KN_DEACTIVATED_BIAS + 1,
* waiting on sub_kn->active to drop, but it
* never drops in Thread 2 which is blocked
* on getting rdtgroup_mutex.
*/
Thread 1 hangs here ---->
wait_event(sub_kn->active == KN_DEACTIVATED_BIAS)
...
rdtgroup_mkdir
rdtgroup_mkdir_mon(parent_kn, prgrp_kn)
mkdir_rdt_prepare(parent_kn, prgrp_kn)
rdtgroup_kn_lock_live(prgrp_kn)
atomic_inc(&rdtgrp->waitcount)
/*
* "c1", prgrp_kn->active--
*
* The active reference on "c1" is
* dropped, but not matching the
* actual active reference taken
* on "mon_groups", thus causing
* Thread 1 to wait forever while
* holding rdtgroup_mutex.
*/
kernfs_break_active_protection(
prgrp_kn)
/*
* Trying to get rdtgroup_mutex
* which is held by Thread 1.
*/
Thread 2 hangs here ----> mutex_lock
...
The problem is that the creation of a subdirectory in the "mon_groups"
directory incorrectly releases the active protection of its parent
directory instead of itself before it starts waiting for rdtgroup_mutex.
This is triggered by the rdtgroup_mkdir() flow calling
rdtgroup_kn_lock_live()/rdtgroup_kn_unlock() with kernfs node of the
parent control group ("c1") as argument. It should be called with kernfs
node "mon_groups" instead. What is currently missing is that the
kn->priv of "mon_groups" is NULL instead of pointing to the rdtgrp.
Fix it by pointing kn->priv to rdtgrp when "mon_groups" is created. Then
it could be passed to rdtgroup_kn_lock_live()/rdtgroup_kn_unlock()
instead. And then it operates on the same rdtgroup structure but handles
the active reference of kernfs node "mon_groups" to prevent deadlock.
The same changes are also made to the "mon_data" directories.
This results in some unused function parameters that will be cleaned up
in follow-up patch as the focus here is on the fix only in support of
backporting efforts.
Fixes:
c7d9aac61311 ("x86/intel_rdt/cqm: Add mkdir support for RDT monitoring")
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1578500886-21771-4-git-send-email-xiaochen.shen@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ronnie Sahlberg [Thu, 30 Jan 2020 19:52:51 +0000 (05:52 +1000)]
cifs: fix soft mounts hanging in the reconnect code
commit
c54849ddd832ae0a45cab16bcd1ed2db7da090d7 upstream.
RHBZ: 1795429
In recent DFS updates we have a new variable controlling how many times we will
retry to reconnect the share.
If DFS is not used, then this variable is initialized to 0 in:
static inline int
dfs_cache_get_nr_tgts(const struct dfs_cache_tgt_list *tl)
{
return tl ? tl->tl_numtgts : 0;
}
This means that in the reconnect loop in smb2_reconnect() we will immediately wrap retries to -1
and never actually get to pass this conditional:
if (--retries)
continue;
The effect is that we no longer reach the point where we fail the commands with -EHOSTDOWN
and basically the kernel threads are virtually hung and unkillable.
Fixes:
a3a53b7603798fd8 (cifs: Add support for failover in smb2_reconnect())
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Sat, 1 Feb 2020 16:26:45 +0000 (16:26 +0000)]
vfs: fix do_last() regression
commit
6404674acd596de41fd3ad5f267b4525494a891a upstream.
Brown paperbag time: fetching ->i_uid/->i_mode really should've been
done from nd->inode. I even suggested that, but the reason for that has
slipped through the cracks and I went for dir->d_inode instead - made
for more "obvious" patch.
Analysis:
- at the entry into do_last() and all the way to step_into(): dir (aka
nd->path.dentry) is known not to have been freed; so's nd->inode and
it's equal to dir->d_inode unless we are already doomed to -ECHILD.
inode of the file to get opened is not known.
- after step_into(): inode of the file to get opened is known; dir
might be pointing to freed memory/be negative/etc.
- at the call of may_create_in_sticky(): guaranteed to be out of RCU
mode; inode of the file to get opened is known and pinned; dir might
be garbage.
The last was the reason for the original patch. Except that at the
do_last() entry we can be in RCU mode and it is possible that
nd->path.dentry->d_inode has already changed under us.
In that case we are going to fail with -ECHILD, but we need to be
careful; nd->inode is pointing to valid struct inode and it's the same
as nd->path.dentry->d_inode in "won't fail with -ECHILD" case, so we
should use that.
Reported-by: "Rantala, Tommi T. (Nokia - FI/Espoo)" <tommi.t.rantala@nokia.com>
Reported-by: syzbot+190005201ced78a74ad6@syzkaller.appspotmail.com
Wearing-brown-paperbag: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org
Fixes:
d0cb50185ae9 ("do_last(): fetch directory ->i_mode and ->i_uid before it's too late")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 1 Feb 2020 09:34:53 +0000 (09:34 +0000)]
Linux 5.4.17
Paul Cercueil [Sat, 16 Nov 2019 13:56:19 +0000 (14:56 +0100)]
power/supply: ingenic-battery: Don't change scale if there's only one
commit
86b9182df8bb12610d4d6feac45a69f3ed57bfd2 upstream.
The ADC in the JZ4740 can work either in high-precision mode with a 2.5V
range, or in low-precision mode with a 7.5V range. The code in place in
this driver will select the proper scale according to the maximum
voltage of the battery.
The JZ4770 however only has one mode, with a 6.6V range. If only one
scale is available, there's no need to change it (and nothing to change
it to), and trying to do so will fail with -EINVAL.
Fixes:
fb24ccfbe1e0 ("power: supply: add Ingenic JZ47xx battery driver.")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Artur Rojek <contact@artur-rojek.eu>
Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Berg [Wed, 4 Dec 2019 16:43:46 +0000 (17:43 +0100)]
Revert "um: Enable CONFIG_CONSTRUCTORS"
commit
87c9366e17259040a9118e06b6dc8de986e5d3d1 upstream.
This reverts commit
786b2384bf1c ("um: Enable CONFIG_CONSTRUCTORS").
There are two issues with this commit, uncovered by Anton in tests
on some (Debian) systems:
1) I completely forgot to call any constructors if CONFIG_CONSTRUCTORS
isn't set. Don't recall now if it just wasn't needed on my system, or
if I never tested this case.
2) With that fixed, it works - with CONFIG_CONSTRUCTORS *unset*. If I
set CONFIG_CONSTRUCTORS, it fails again, which isn't totally
unexpected since whatever wanted to run is likely to have to run
before the kernel init etc. that calls the constructors in this case.
Basically, some constructors that gcc emits (libc has?) need to run
very early during init; the failure mode otherwise was that the ptrace
fork test already failed:
----------------------
$ ./linux mem=512M
Core dump limits :
soft - 0
hard - NONE
Checking that ptrace can change system call numbers...check_ptrace : child exited with exitcode 6, while expecting 0; status 0x67f
Aborted
----------------------
Thinking more about this, it's clear that we simply cannot support
CONFIG_CONSTRUCTORS in UML. All the cases we need now (gcov, kasan)
involve not use of the __attribute__((constructor)), but instead
some constructor code/entry generated by gcc. Therefore, we cannot
distinguish between kernel constructors and system constructors.
Thus, revert this commit.
Cc: stable@vger.kernel.org [5.4+]
Fixes:
786b2384bf1c ("um: Enable CONFIG_CONSTRUCTORS")
Reported-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Andrew Murray [Fri, 17 Jan 2020 13:43:24 +0000 (13:43 +0000)]
KVM: arm64: Write arch.mdcr_el2 changes since last vcpu_load on VHE
commit
4942dc6638b07b5326b6d2faa142635c559e7cd5 upstream.
On VHE systems arch.mdcr_el2 is written to mdcr_el2 at vcpu_load time to
set options for self-hosted debug and the performance monitors
extension.
Unfortunately the value of arch.mdcr_el2 is not calculated until
kvm_arm_setup_debug() in the run loop after the vcpu has been loaded.
This means that the initial brief iterations of the run loop use a zero
value of mdcr_el2 - until the vcpu is preempted. This also results in a
delay between changes to vcpu->guest_debug taking effect.
Fix this by writing to mdcr_el2 in kvm_arm_setup_debug() on VHE systems
when a change to arch.mdcr_el2 has been detected.
Fixes:
d5a21bcc2995 ("KVM: arm64: Move common VHE/non-VHE trap config in separate functions")
Cc: <stable@vger.kernel.org> # 4.17.x-
Suggested-by: James Morse <james.morse@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Herbert Xu [Tue, 19 Nov 2019 09:41:31 +0000 (17:41 +0800)]
crypto: pcrypt - Fix user-after-free on module unload
commit
07bfd9bdf568a38d9440c607b72342036011f727 upstream.
On module unload of pcrypt we must unregister the crypto algorithms
first and then tear down the padata structure. As otherwise the
crypto algorithms are still alive and can be used while the padata
structure is being freed.
Fixes:
5068c7a883d1 ("crypto: pcrypt - Add pcrypt crypto...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Iuliana Prodan [Tue, 26 Nov 2019 22:54:26 +0000 (00:54 +0200)]
crypto: caam - do not reset pointer size from MCFGR register
commit
7278fa25aa0ebcc0e62c39b12071069df13f7e77 upstream.
In commit '
a1cf573ee95 ("crypto: caam - select DMA address size at runtime")'
CAAM pointer size (caam_ptr_size) is changed from
sizeof(dma_addr_t) to runtime value computed from MCFGR register.
Therefore, do not reset MCFGR[PS].
Fixes:
a1cf573ee95 ("crypto: caam - select DMA address size at runtime")
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Cc: <stable@vger.kernel.org>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Alison Wang <alison.wang@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Axtens [Wed, 8 Jan 2020 05:06:46 +0000 (16:06 +1100)]
crypto: vmx - reject xts inputs that are too short
commit
1372a51b88fa0d5a8ed2803e4975c98da3f08463 upstream.
When the kernel XTS implementation was extended to deal with ciphertext
stealing in commit
8083b1bf8163 ("crypto: xts - add support for ciphertext
stealing"), a check was added to reject inputs that were too short.
However, in the vmx enablement - commit
239668419349 ("crypto: vmx/xts -
use fallback for ciphertext stealing"), that check wasn't added to the
vmx implementation. This disparity leads to errors like the following:
alg: skcipher: p8_aes_xts encryption unexpectedly succeeded on test vector "random: len=0 klen=64"; expected_error=-22, cfg="random: inplace may_sleep use_finup src_divs=[<flush>66.99%@+10, 33.1%@alignmask+1155]"
Return -EINVAL if asked to operate with a cryptlen smaller than the AES
block size. This brings vmx in line with the generic implementation.
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206049
Fixes:
239668419349 ("crypto: vmx/xts - use fallback for ciphertext stealing")
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[dja: commit message]
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Herbert Xu [Thu, 5 Dec 2019 05:45:05 +0000 (13:45 +0800)]
crypto: af_alg - Use bh_lock_sock in sk_destruct
commit
37f96694cf73ba116993a9d2d99ad6a75fa7fdb0 upstream.
As af_alg_release_parent may be called from BH context (most notably
due to an async request that only completes after socket closure,
or as reported here because of an RCU-delayed sk_destruct call), we
must use bh_lock_sock instead of lock_sock.
Reported-by: syzbot+c2f1558d49e25cc36e5e@syzkaller.appspotmail.com
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Fixes:
c840ac6af3f8 ("crypto: af_alg - Disallow bind/setkey/...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Thu, 28 Nov 2019 17:22:03 +0000 (18:22 +0100)]
rsi: fix non-atomic allocation in completion handler
commit
b9b9f9fea21830f85cf0148cd8dce001ae55ead1 upstream.
USB completion handlers are called in atomic context and must
specifically not allocate memory using GFP_KERNEL.
Fixes:
a1854fae1414 ("rsi: improve RX packet handling in USB interface")
Cc: stable <stable@vger.kernel.org> # 4.17
Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Thu, 28 Nov 2019 17:22:02 +0000 (18:22 +0100)]
rsi: fix memory leak on failed URB submission
commit
47768297481184932844ab01a86752ba31a38861 upstream.
Make sure to free the skb on failed receive-URB submission (e.g. on
disconnect or currently also due to a missing endpoint).
Fixes:
a1854fae1414 ("rsi: improve RX packet handling in USB interface")
Cc: stable <stable@vger.kernel.org> # 4.17
Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Thu, 28 Nov 2019 17:22:01 +0000 (18:22 +0100)]
rsi: fix use-after-free on probe errors
commit
92aafe77123ab478e5f5095878856ab0424910da upstream.
The driver would fail to stop the command timer in most error paths,
something which specifically could lead to the timer being freed while
still active on I/O errors during probe.
Fix this by making sure that each function starting the timer also stops
it in all relevant error paths.
Reported-by: syzbot+1d1597a5aa3679c65b9f@syzkaller.appspotmail.com
Fixes:
b78e91bcfb33 ("rsi: Add new firmware loading method")
Cc: stable <stable@vger.kernel.org> # 4.12
Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Thu, 28 Nov 2019 17:22:00 +0000 (18:22 +0100)]
rsi: fix use-after-free on failed probe and unbind
commit
e93cd35101b61e4c79149be2cfc927c4b28dc60c upstream.
Make sure to stop both URBs before returning after failed probe as well
as on disconnect to avoid use-after-free in the completion handler.
Reported-by: syzbot+b563b7f8dbe8223a51e8@syzkaller.appspotmail.com
Fixes:
a4302bff28e2 ("rsi: add bluetooth rx endpoint")
Fixes:
dad0d04fa7ba ("rsi: Add RS9113 wireless driver")
Cc: stable <stable@vger.kernel.org> # 3.15
Cc: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com>
Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Cc: Fariya Fatima <fariyaf@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tony Lindgren [Mon, 9 Dec 2019 21:55:15 +0000 (13:55 -0800)]
bus: ti-sysc: Fix missing force mstandby quirk handling
[ Upstream commit
93c60483b5feefced92b869d5f97769495bc6313 ]
Commit
03856e928b0e ("bus: ti-sysc: Handle mstandby quirk and use it for
musb") added quirk handling for mstandby quirk but did not consider that
we also need a quirk variant for SYSC_QUIRK_FORCE_MSTANDBY.
We need to use forced idle mode for both SYSC_QUIRK_SWSUP_MSTANDBY and
SYSC_QUIRK_FORCE_MSTANDBY, but SYSC_QUIRK_SWSUP_MSTANDBY also need to
additionally also configure no-idle mode when enabled.
Fixes:
03856e928b0e ("bus: ti-sysc: Handle mstandby quirk and use it for musb")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andre Heider [Fri, 22 Nov 2019 12:31:42 +0000 (13:31 +0100)]
Bluetooth: btbcm: Use the BDADDR_PROPERTY quirk
[ Upstream commit
a4f95f31a9f38d9bb1fd313fcc2d0c0d48116ee3 ]
Some devices ship with the controller default address, like the
Orange Pi 3 (BCM4345C5).
Allow the bootloader to set a valid address through the device tree.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marcel Holtmann [Thu, 21 Nov 2019 23:33:45 +0000 (00:33 +0100)]
Bluetooth: Allow combination of BDADDR_PROPERTY and INVALID_BDADDR quirks
[ Upstream commit
7fdf6c6a0d0e032aac2aa4537a23af1e04a397ce ]
When utilizing BDADDR_PROPERTY and INVALID_BDADDR quirks together it
results in an unconfigured controller even if the bootloader provides
a valid address. Fix this by allowing a bootloader provided address
to mark the controller as configured.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Tested-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hui Wang [Thu, 21 Nov 2019 02:26:44 +0000 (10:26 +0800)]
ALSA: hda/realtek - Move some alc236 pintbls to fallback table
[ Upstream commit
d64ebdbfd4f71406f58210f5ccb16977b4cd31d2 ]
We have a new Dell machine which needs to apply the quirk
ALC255_FIXUP_DELL1_MIC_NO_PRESENCE, try to use the fallback table
to fix it this time. And we could remove all pintbls of alc236
for applying DELL1_MIC_NO_PRESENCE on Dell machines.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20191121022644.8078-2-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Laura Abbott [Tue, 8 Sep 2015 16:53:38 +0000 (09:53 -0700)]
usb-storage: Disable UAS on JMicron SATA enclosure
[ Upstream commit
bc3bdb12bbb3492067c8719011576370e959a2e6 ]
Steve Ellis reported incorrect block sizes and alignement
offsets with a SATA enclosure. Adding a quirk to disable
UAS fixes the problems.
Reported-by: Steven Ellis <sellis@redhat.com>
Cc: Pacho Ramos <pachoramos@gmail.com>
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Thu, 14 Nov 2019 16:25:28 +0000 (08:25 -0800)]
bus: ti-sysc: Add module enable quirk for audio AESS
[ Upstream commit
020003f763e24e4ed0bb3d8909f3940891536d5d ]
We must set the autogating bit on enable for AESS (Audio Engine SubSystem)
when probed with ti-sysc interconnect target module driver. Otherwise it
won't idle properly.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Adrian Hunter [Thu, 10 Oct 2019 12:46:30 +0000 (15:46 +0300)]
mmc: sdhci-pci: Add support for Intel JSL
[ Upstream commit
315e3bd7ac19b18ba704d96cbb9b79bad485c01f ]
Add PCI Ids for Intel JSL.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Raul E Rangel [Wed, 4 Sep 2019 16:46:25 +0000 (10:46 -0600)]
mmc: sdhci-pci: Quirk for AMD SDHC Device 0x7906
[ Upstream commit
7a869f00bb15bcefb8804d798a49b086267b03e6 ]
AMD SDHC 0x7906 requires a hard reset to clear all internal state.
Otherwise it can get into a bad state where the DATA lines are always
read as zeros.
This change requires firmware that can transition the device into
D3Cold for it to work correctly. If the firmware does not support
transitioning to D3Cold then the power state transitions are a no-op.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ben Dooks [Tue, 15 Oct 2019 13:12:38 +0000 (14:12 +0100)]
ARM: OMAP2+: SmartReflex: add omap_sr_pdata definition
[ Upstream commit
2079fe6ea8cbd2fb2fbadba911f1eca6c362eb9b ]
The omap_sr_pdata is not declared but is exported, so add a
define for it to fix the following warning:
arch/arm/mach-omap2/pdata-quirks.c:609:36: warning: symbol 'omap_sr_pdata' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Joel Stanley [Tue, 12 Nov 2019 00:09:26 +0000 (10:39 +1030)]
ARM: config: aspeed-g5: Enable 8250_DW quirks
[ Upstream commit
a5331a7a87ec81d5228b7421acf831b2d0c0de26 ]
This driver option is used by the AST2600 A0 boards to work around a
hardware issue.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andy Shevchenko [Tue, 29 Oct 2019 09:44:09 +0000 (11:44 +0200)]
mfd: intel-lpss: Add Intel Comet Lake PCH-H PCI IDs
[ Upstream commit
dd047dce3a6f5233b98e792e2287cc549da35879 ]
Intel Comet Lake PCH-H has the same LPSS than Intel Cannon Lake.
Add the new IDs to the list of supported devices.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Joakim Zhang [Fri, 1 Nov 2019 08:36:16 +0000 (08:36 +0000)]
perf/imx_ddr: Add enhanced AXI ID filter support
[ Upstream commit
44f8bd014a94ed679ddb77d0b92350d4ac4f23a5 ]
With DDR_CAP_AXI_ID_FILTER quirk, indicating HW supports AXI ID filter
which only can get bursts from DDR transaction, i.e. DDR read/write
requests.
This patch add DDR_CAP_AXI_ID_ENHANCED_FILTER quirk, indicating HW
supports AXI ID filter which can get bursts and bytes from DDR
transaction at the same time. We hope PMU always return bytes in the
driver due to it is more meaningful for users.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Logan Gunthorpe [Tue, 22 Oct 2019 22:01:21 +0000 (16:01 -0600)]
iommu/amd: Support multiple PCI DMA aliases in IRQ Remapping
[ Upstream commit
3c124435e8dd516df4b2fc983f4415386fd6edae ]
Non-Transparent Bridge (NTB) devices (among others) may have many DMA
aliases seeing the hardware will send requests with different device ids
depending on their origin across the bridged hardware.
See commit
ad281ecf1c7d ("PCI: Add DMA alias quirk for Microsemi Switchtec
NTB") for more information on this.
The AMD IOMMU IRQ remapping functionality ignores all PCI aliases for
IRQs so if devices send an interrupt from one of their aliases they
will be blocked on AMD hardware with the IOMMU enabled.
To fix this, ensure IRQ remapping is enabled for all aliases with
MSI interrupts.
This is analogous to the functionality added to the Intel IRQ remapping
code in commit
3f0c625c6ae7 ("iommu/vt-d: Allow interrupts from the entire
bus for aliased devices")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Logan Gunthorpe [Tue, 22 Oct 2019 22:01:20 +0000 (16:01 -0600)]
iommu/amd: Support multiple PCI DMA aliases in device table
[ Upstream commit
3332364e4ebc0581d133a334645a20fd13b580f1 ]
Non-Transparent Bridge (NTB) devices (among others) may have many DMA
aliases seeing the hardware will send requests with different device ids
depending on their origin across the bridged hardware.
See commit
ad281ecf1c7d ("PCI: Add DMA alias quirk for Microsemi
Switchtec NTB") for more information on this.
The AMD IOMMU ignores all the PCI aliases except the last one so DMA
transfers from these aliases will be blocked on AMD hardware with the
IOMMU enabled.
To fix this, ensure the DTEs are cloned for every PCI alias. This is
done by copying the DTE data for each alias as well as the IVRS alias
every time it is changed.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jarkko Nikula [Tue, 29 Oct 2019 11:58:02 +0000 (13:58 +0200)]
spi: pxa2xx: Add support for Intel Comet Lake-H
[ Upstream commit
f0cf17ed76cffa365001d263ced1f130ec794917 ]
Add Intel Comet Lake-H LPSS SPI PCI IDs.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20191029115802.6779-1-jarkko.nikula@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Mon, 21 Oct 2019 21:15:55 +0000 (14:15 -0700)]
bus: ti-sysc: Use swsup quirks also for am335x musb
[ Upstream commit
1819ef2e2d12d5b1a6ee54ac1c2afe35cffc677c ]
Also on am335x we need the swsup quirks for musb.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Mon, 21 Oct 2019 20:36:09 +0000 (13:36 -0700)]
bus: ti-sysc: Handle mstandby quirk and use it for musb
[ Upstream commit
03856e928b0e1a1c274eece1dfe4330a362c37f3 ]
We need swsup quirks for sidle and mstandby for musb to work
properly.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thomas Voegtle [Wed, 2 Oct 2019 17:26:03 +0000 (14:26 -0300)]
media: dvbsky: add support for eyeTV Geniatech T2 lite
[ Upstream commit
14494583336880640654300c76d0f5df3360d85f ]
Adds USB ID for the eyeTV Geniatech T2 lite to the dvbsky driver.
This is a Geniatech T230C based stick without IR and a different USB ID.
Signed-off-by: Thomas Voegtle <tv@lio96.de>
Tested-by: Jan Pieter van Woerkom <jp@jpvw.nl>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Slawomir Pawlowski [Tue, 17 Sep 2019 09:20:48 +0000 (09:20 +0000)]
PCI: Add DMA alias quirk for Intel VCA NTB
[ Upstream commit
56b4cd4b7da9ee95778eb5c8abea49f641ebfd91 ]
Intel Visual Compute Accelerator (VCA) is a family of PCIe add-in devices
exposing computational units via Non Transparent Bridges (NTB, PEX 87xx).
Similarly to MIC x200, we need to add DMA aliases to allow buffer access
when IOMMU is enabled.
Add aliases to allow computational unit access to host memory. These
aliases mark the whole VCA device as one IOMMU group.
All possible slot numbers (0x20) are used, since we are unable to tell what
slot is used on other side. This quirk is intended for both host and
computational unit sides. The VCA devices have up to five functions: four
for DMA channels and one additional.
Link: https://lore.kernel.org/r/5683A335CC8BE1438C3C30C49DCC38DF637CED8E@IRSMSX102.ger.corp.intel.com
Signed-off-by: Slawomir Pawlowski <slawomir.pawlowski@intel.com>
Signed-off-by: Przemek Kitszel <przemyslawx.kitszel@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pacien TRAN-GIRARD [Fri, 27 Sep 2019 21:19:03 +0000 (23:19 +0200)]
platform/x86: dell-laptop: disable kbd backlight on Inspiron 10xx
[ Upstream commit
10b65e2915b2fcc606d173e98a972850101fb4c4 ]
This patch adds a quirk disabling keyboard backlight support for the
Dell Inspiron 1012 and 1018.
Those models wrongly report supporting keyboard backlight control
features (through SMBIOS tokens) even though they're not equipped with
a backlit keyboard. This led to broken controls being exposed
through sysfs by this driver which froze the system when used.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107651
Signed-off-by: Pacien TRAN-GIRARD <pacien.trangirard@pacien.net>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sergio Paracuellos [Sun, 6 Oct 2019 18:10:32 +0000 (20:10 +0200)]
staging: mt7621-pci: add quirks for 'E2' revision using 'soc_device_attribute'
[ Upstream commit
b483b4e4d3f6bfd5089b9e6dc9ba259879c6ce6f ]
Depending on revision of the chip, reset lines are inverted. Make code
more readable making use of 'soc_device_match' in driver probe function.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20191006181032.19112-1-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrii Nakryiko [Fri, 4 Oct 2019 04:02:11 +0000 (21:02 -0700)]
libbpf: Fix BTF-defined map's __type macro handling of arrays
[ Upstream commit
a53ba15d81995868651dd28a85d8045aef3d4e20 ]
Due to a quirky C syntax of declaring pointers to array or function
prototype, existing __type() macro doesn't work with map key/value types
that are array or function prototype. One has to create a typedef first
and use it to specify key/value type for a BPF map. By using typeof(),
pointer to type is now handled uniformly for all kinds of types. Convert
one of self-tests as a demonstration.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191004040211.2434033-1-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiange Zhao [Thu, 19 Sep 2019 18:22:59 +0000 (13:22 -0500)]
drm/amdgpu/SRIOV: add navi12 pci id for SRIOV (v2)
[ Upstream commit
57d4f3b7fd65b56f98b62817f27c461142c0bc2a ]
Add Navi12 PCI id support.
v2: flag as experimental for now (Alex)
Signed-off-by: Jiange Zhao <Jiange.Zhao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sam McNally [Tue, 17 Sep 2019 05:49:33 +0000 (15:49 +1000)]
ASoC: Intel: cht_bsw_rt5645: Add quirk for boards using pmc_plt_clk_0
[ Upstream commit
adebb11139029ddf1fba6f796c4a476f17eacddc ]
As of commit
648e921888ad ("clk: x86: Stop marking clocks as
CLK_IS_CRITICAL"), the cht_bsw_rt5645 driver needs to enable the clock
it's using for the codec's mclk. It does this from commit
7735bce05a9c
("ASoC: Intel: boards: use devm_clk_get() unconditionally"), enabling
pmc_plt_clk_3. However, Strago family Chromebooks use pmc_plt_clk_0 for
the codec mclk, resulting in white noise with some digital microphones.
Add a DMI-based quirk for Strago family Chromebooks to use pmc_plt_clk_0
instead - mirroring the changes made to cht_bsw_max98090_ti in
commit
a182ecd3809c ("ASoC: intel: cht_bsw_max98090_ti: Add quirk for
boards using pmc_plt_clk_0") and making use of the existing
dmi_check_system() call and related infrastructure added in
commit
22af29114eb4 ("ASoC: Intel: cht-bsw-rt5645: add quirks for
SSP0/AIF1/AIF2 routing").
Signed-off-by: Sam McNally <sammc@chromium.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190917054933.209335-1-sammc@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yauhen Kharuzhy [Mon, 16 Sep 2019 21:15:36 +0000 (00:15 +0300)]
extcon-intel-cht-wc: Don't reset USB data connection at probe
[ Upstream commit
e81b88932985c9134d410f4eaaaa9b81a3b4bd0c ]
Intel Cherry Trail Whiskey Cove extcon driver connect USB data lines to
PMIC at driver probing for further charger detection. This causes reset of
USB data sessions and removing all devices from bus. If system was
booted from Live CD or USB dongle, this makes system unusable.
Check if USB ID pin is floating and re-route data lines in this case
only, don't touch otherwise.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
[cw00.choi: Clean-up the minor coding style]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rodrigo Rivas Costa [Tue, 7 Jan 2020 19:48:13 +0000 (20:48 +0100)]
HID: steam: Fix input device disappearing
[ Upstream commit
20eee6e5af35d9586774e80b6e0b1850e7cc9899 ]
The `connected` value for wired devices was not properly initialized,
it must be set to `true` upon creation, because wired devices do not
generate connection events.
When a raw client (the Steam Client) uses the device, the input device
is destroyed. Then, when the raw client finishes, it must be recreated.
But since the `connected` variable was false this never happended.
Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Tue, 7 Jan 2020 20:43:59 +0000 (21:43 +0100)]
atm: eni: fix uninitialized variable warning
[ Upstream commit
30780d086a83332adcd9362281201cee7c3d9d19 ]
With -O3, gcc has found an actual unintialized variable stored
into an mmio register in two instances:
drivers/atm/eni.c: In function 'discard':
drivers/atm/eni.c:465:13: error: 'dma[1]' is used uninitialized in this function [-Werror=uninitialized]
writel(dma[i*2+1],eni_dev->rx_dma+dma_wr*8+4);
^
drivers/atm/eni.c:465:13: error: 'dma[3]' is used uninitialized in this function [-Werror=uninitialized]
Change the code to always write zeroes instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiping Ma [Tue, 7 Jan 2020 06:34:00 +0000 (14:34 +0800)]
stmmac: debugfs entry name is not be changed when udev rename device name.
[ Upstream commit
481a7d154cbbd5ca355cc01cc8969876b240eded ]
Add one notifier for udev changes net device name.
Fixes:
b6601323ef9e ("net: stmmac: debugfs entry name is not be changed when udev rename")
Signed-off-by: Jiping Ma <jiping.ma2@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thomas Anderson [Mon, 2 Dec 2019 21:47:13 +0000 (13:47 -0800)]
drm/amd/display: Reduce HDMI pixel encoding if max clock is exceeded
[ Upstream commit
840c90fce6c78bc6b2c4cb9e836d70985ed32066 ]
For high-res (8K) or HFR (4K120) displays, using uncompressed pixel
formats like YCbCr444 would exceed the bandwidth of HDMI 2.0, so the
"interesting" modes would be disabled, leaving only low-res or low
framerate modes.
This change lowers the pixel encoding to 4:2:2 or 4:2:0 if the max TMDS
clock is exceeded. Verified that 8K30 and 4K120 are now available and
working with a Samsung Q900R over an HDMI 2.0b link from a Radeon 5700.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Thomas Anderson <thomasanderson@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qian Cai [Mon, 6 Jan 2020 15:27:27 +0000 (10:27 -0500)]
iommu/dma: fix variable 'cookie' set but not used
[ Upstream commit
55817b340a31951d23d1692db45522560b1d20f9 ]
The commit
c18647900ec8 ("iommu/dma: Relax locking in
iommu_dma_prepare_msi()") introduced a compliation warning,
drivers/iommu/dma-iommu.c: In function 'iommu_dma_prepare_msi':
drivers/iommu/dma-iommu.c:1206:27: warning: variable 'cookie' set but
not used [-Wunused-but-set-variable]
struct iommu_dma_cookie *cookie;
^~~~~~
Fixes:
c18647900ec8 ("iommu/dma: Relax locking in iommu_dma_prepare_msi()")
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Osipenko [Mon, 6 Jan 2020 01:51:54 +0000 (04:51 +0300)]
gpio: max77620: Add missing dependency on GPIOLIB_IRQCHIP
[ Upstream commit
c5706c7defc79de68a115b5536376298a8fef111 ]
Driver fails to compile in a minimized kernel's configuration because of
the missing dependency on GPIOLIB_IRQCHIP.
error: ‘struct gpio_chip’ has no member named ‘irq’
44 | virq = irq_find_mapping(gpio->gpio_chip.irq.domain, offset);
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200106015154.12040-1-digetx@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Krzysztof Kozlowski [Sat, 4 Jan 2020 14:31:43 +0000 (15:31 +0100)]
net: wan: sdla: Fix cast from pointer to integer of different size
[ Upstream commit
00c0688cecadbf7ac2f5b4cdb36d912a2d3f0cca ]
Since net_device.mem_start is unsigned long, it should not be cast to
int right before casting to pointer. This fixes warning (compile
testing on alpha architecture):
drivers/net/wan/sdla.c: In function ‘sdla_transmit’:
drivers/net/wan/sdla.c:711:13: warning:
cast to pointer from integer of different size [-Wint-to-pointer-cast]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fenghua Yu [Thu, 2 Jan 2020 21:27:06 +0000 (13:27 -0800)]
drivers/net/b44: Change to non-atomic bit operations on pwol_mask
[ Upstream commit
f11421ba4af706cb4f5703de34fa77fba8472776 ]
Atomic operations that span cache lines are super-expensive on x86
(not just to the current processor, but also to other processes as all
memory operations are blocked until the operation completes). Upcoming
x86 processors have a switch to cause such operations to generate a #AC
trap. It is expected that some real time systems will enable this mode
in BIOS.
In preparation for this, it is necessary to fix code that may execute
atomic instructions with operands that cross cachelines because the #AC
trap will crash the kernel.
Since "pwol_mask" is local and never exposed to concurrency, there is
no need to set bits in pwol_mask using atomic operations.
Directly operate on the byte which contains the bit instead of using
__set_bit() to avoid any big endian concern due to type cast to
unsigned long in __set_bit().
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liran Alon [Fri, 3 Jan 2020 16:44:59 +0000 (18:44 +0200)]
net: Google gve: Remove dma_wmb() before ringing doorbell
[ Upstream commit
b54ef37b1ce892fdf6b632d566246d2f2f539910 ]
Current code use dma_wmb() to ensure Rx/Tx descriptors are visible
to device before writing to doorbell.
However, these dma_wmb() are wrong and unnecessary. Therefore,
they should be removed.
iowrite32be() called from gve_rx_write_doorbell()/gve_tx_put_doorbell()
should guaratee that all previous writes to WB/UC memory is visible to
device before the write done by iowrite32be().
E.g. On ARM64, iowrite32be() calls __iowmb() which expands to dma_wmb()
and only then calls __raw_writel().
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
wuxu.wu [Wed, 1 Jan 2020 03:39:41 +0000 (11:39 +0800)]
spi: spi-dw: Add lock protect dw_spi rx/tx to prevent concurrent calls
[ Upstream commit
19b61392c5a852b4e8a0bf35aecb969983c5932d ]
dw_spi_irq() and dw_spi_transfer_one concurrent calls.
I find a panic in dw_writer(): txw = *(u8 *)(dws->tx), when dw->tx==null,
dw->len==4, and dw->tx_end==1.
When tpm driver's message overtime dw_spi_irq() and dw_spi_transfer_one
may concurrent visit dw_spi, so I think dw_spi structure lack of protection.
Otherwise dw_spi_transfer_one set dw rx/tx buffer and then open irq,
store dw rx/tx instructions and other cores handle irq load dw rx/tx
instructions may out of order.
[ 1025.321302] Call trace:
...
[ 1025.321319] __crash_kexec+0x98/0x148
[ 1025.321323] panic+0x17c/0x314
[ 1025.321329] die+0x29c/0x2e8
[ 1025.321334] die_kernel_fault+0x68/0x78
[ 1025.321337] __do_kernel_fault+0x90/0xb0
[ 1025.321346] do_page_fault+0x88/0x500
[ 1025.321347] do_translation_fault+0xa8/0xb8
[ 1025.321349] do_mem_abort+0x68/0x118
[ 1025.321351] el1_da+0x20/0x8c
[ 1025.321362] dw_writer+0xc8/0xd0
[ 1025.321364] interrupt_transfer+0x60/0x110
[ 1025.321365] dw_spi_irq+0x48/0x70
...
Signed-off-by: wuxu.wu <wuxu.wu@huawei.com>
Link: https://lore.kernel.org/r/1577849981-31489-1-git-send-email-wuxu.wu@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sean Nyekjaer [Wed, 11 Dec 2019 13:58:51 +0000 (14:58 +0100)]
can: tcan4x5x: tcan4x5x_parse_config(): reset device before register access
[ Upstream commit
c3083124e6a1c0d6cd4fe3b3f627b488bd3b10c4 ]
It's a good idea to reset a ip-block/spi device before using it, this
patch will reset the device.
And a generic reset function if needed elsewhere.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paul Cercueil [Mon, 16 Dec 2019 16:24:32 +0000 (10:24 -0600)]
usb: musb: jz4740: Silence error if code is -EPROBE_DEFER
[ Upstream commit
ce03cbcb4b4fd2a3817f32366001f1ca45d213b8 ]
Avoid printing any error message if the error code is -EPROBE_DEFER.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Bin Liu <b-liu@ti.com>
Link: https://lore.kernel.org/r/20191216162432.1256-1-b-liu@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Russell King [Fri, 29 Nov 2019 14:51:35 +0000 (14:51 +0000)]
watchdog: orion: fix platform_get_irq() complaints
[ Upstream commit
dcbce5fbcc69bf2553f650004aad44bf390eca73 ]
Fix:
orion_wdt
f1020300.watchdog: IRQ index 1 not found
which is caused by platform_get_irq() now complaining when optional
IRQs are not found. Neither interrupt for orion is required, so
make them both optional.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/E1iahcN-0000AT-Co@rmk-PC.armlinux.org.uk
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andreas Kemnade [Fri, 13 Dec 2019 21:48:02 +0000 (22:48 +0100)]
watchdog: rn5t618_wdt: fix module aliases
[ Upstream commit
a76dfb859cd42df6e3d1910659128ffcd2fb6ba2 ]
Platform device aliases were missing so module autoloading
did not work.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191213214802.22268-1-andreas@kemnade.info
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Engraf [Wed, 27 Nov 2019 08:46:17 +0000 (09:46 +0100)]
watchdog: max77620_wdt: fix potential build errors
[ Upstream commit
da9e3f4e30a53cd420cf1e6961c3b4110f0f21f0 ]
max77620_wdt uses watchdog core functions. Enable CONFIG_WATCHDOG_CORE
to fix potential build errors.
Signed-off-by: David Engraf <david.engraf@sysgo.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191127084617.16937-1-david.engraf@sysgo.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Srinivas Pandruvada [Fri, 27 Dec 2019 21:40:57 +0000 (13:40 -0800)]
HID: intel-ish-hid: ipc: Add Tiger Lake PCI device ID
[ Upstream commit
1479a82d82df68dfac29c72c774cb8bdc17d4eb1 ]
Added Tiger Lake PCI device ID to the supported device list.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Sun, 22 Dec 2019 18:17:02 +0000 (10:17 -0800)]
phy: cpcap-usb: Prevent USB line glitches from waking up modem
[ Upstream commit
63078b6ba09e842f09df052c5728857389fddcd2 ]
The micro-USB connector on Motorola Mapphone devices can be muxed between
the SoC and the mdm6600 modem. But even when used for the SoC, configuring
the PHY with ID pin grounded will wake up the modem from idle state. Looks
like the issue is probably caused by line glitches.
We can prevent the glitches by using a previously unknown mode of the
GPIO mux to prevent the USB lines from being connected to the moden while
configuring the USB PHY, and enable the USB lines after configuring the
PHY.
Note that this only prevents waking up mdm6600 as regular USB A-host mode,
and does not help when connected to a lapdock. The lapdock specific issue
still needs to be debugged separately.
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dragos Tarcatu [Wed, 4 Dec 2019 21:04:47 +0000 (15:04 -0600)]
ASoC: topology: Prevent use-after-free in snd_soc_get_pcm_runtime()
[ Upstream commit
dd836ddf4e4e1c7f1eb2ae44783ccd70872ef24e ]
remove_link() is currently calling snd_soc_remove_dai_link() after
it has already freed the memory for the link name. But this is later
read from snd_soc_get_pcm_runtime() causing a KASAN use-after-free
warning. Reorder the cleanups to fix this issue.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20191204210447.11701-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chuhong Yuan [Tue, 3 Dec 2019 11:13:03 +0000 (19:13 +0800)]
ASoC: fsl_audmix: add missed pm_runtime_disable
[ Upstream commit
77fffa742285f2b587648d6c72b5c705633f146f ]
The driver forgets to call pm_runtime_disable in probe failure
and remove.
Add the missed calls to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20191203111303.12933-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bjorn Andersson [Fri, 20 Dec 2019 10:17:15 +0000 (15:47 +0530)]
phy: qcom-qmp: Increase PHY ready timeout
[ Upstream commit
cd217ee6867d285ceecd610fa1006975d5c683fa ]
It's typical for the QHP PHY to take slightly above 1ms to initialize,
so increase the timeout of the PHY ready check to 10ms - as already done
in the downstream PCIe driver.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Evan Green <evgreen@chromium.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pan Zhang [Thu, 19 Dec 2019 02:45:30 +0000 (10:45 +0800)]
drivers/hid/hid-multitouch.c: fix a possible null pointer access.
[ Upstream commit
306d5acbfc66e7cccb4d8f91fc857206b8df80d1 ]
1002 if ((quirks & MT_QUIRK_IGNORE_DUPLICATES) && mt) {
1003 struct input_mt_slot *i_slot = &mt->slots[slotnum];
1004
1005 if (input_mt_is_active(i_slot) &&
1006 input_mt_is_used(mt, i_slot))
1007 return -EAGAIN;
1008 }
We previously assumed 'mt' could be null (see line 1002).
The following situation is similar, so add a judgement.
Signed-off-by: Pan Zhang <zhangpan26@huawei.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pierre-Louis Bossart [Wed, 18 Dec 2019 00:05:17 +0000 (18:05 -0600)]
ASoC: SOF: Intel: hda: hda-dai: fix oops on hda_link .hw_free
[ Upstream commit
921162c81a089aa2f442103290f1af9ba281fc9f ]
When the PCM_PARAM IPC fails while configuring the FE, the kernel
oopses in the HDaudio link DMA .hw_free operation. The root cause is a
NULL dma_data since the BE .hw_params was never called by the SOC
core.
This error can also happen if the HDaudio link DMA configuration IPC
fails in the BE .hw_params.
This patches makes sure the dma_data is properly saved in .hw_params,
and tested before being use in hw_free.
GitHub issue: https://github.com/thesofproject/linux/issues/1417
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191218000518.5830-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kai Vehmanen [Wed, 18 Dec 2019 00:05:16 +0000 (18:05 -0600)]
ASoC: SOF: fix fault at driver unload after failed probe
[ Upstream commit
b06e46427f987bf83dcb6a69516b57276eb8ec0c ]
If sof_machine_check() fails during driver probe, the IPC
state is not initialized and this will lead to a NULL
dereference at driver unload. Example log is as follows:
[ 1535.980630] sof-audio-pci 0000:00:1f.3: error: no matching ASoC machine driver found - aborting probe
[ 1535.980631] sof-audio-pci 0000:00:1f.3: error: failed to get machine info -19
[ 1535.980632] sof-audio-pci 0000:00:1f.3: error: sof_probe_work failed err: -19
[ 1550.798373] BUG: kernel NULL pointer dereference, address:
0000000000000008
...
[ 1550.798393] Call Trace:
[ 1550.798397] snd_sof_ipc_free+0x15/0x30 [snd_sof]
[ 1550.798399] snd_sof_device_remove+0x29/0xa0 [snd_sof]
[ 1550.798400] sof_pci_remove+0x10/0x30 [snd_sof_pci]
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191218000518.5830-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jason Gerecke [Mon, 16 Dec 2019 18:18:57 +0000 (10:18 -0800)]
HID: wacom: Recognize new MobileStudio Pro PID
[ Upstream commit
fe4e940f0f91b4a506f048b42e00386f5ad322b6 ]
A new PID is in use for repaired MobileStudio Pro devices. Add it to the
list of devices that need special-casing in wacom_wac_pad_event.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Even Xu [Tue, 17 Dec 2019 01:11:18 +0000 (09:11 +0800)]
HID: intel-ish-hid: ipc: add CMP device id
[ Upstream commit
abb33ee8a8c0d146b4b2c52937dc86a15ec92d05 ]
Add Comet Lake H into ishtp support list.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Balan [Wed, 27 Nov 2019 03:23:29 +0000 (03:23 +0000)]
HID: Add quirk for incorrect input length on Lenovo Y720
[ Upstream commit
fd0913768701612fc2b8ab9c8a5c019133e8d978 ]
Apply it to the Lenovo Y720 gaming laptop I2C peripheral then.
This fixes dmesg being flooded with errors visible on un-suspend
in Linux Mint 19 Cinnamon.
Example of error log:
<...>
[ 4.326588] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4)
[ 4.326845] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4)
[ 4.327095] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4)
[ 4.327341] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4)
[ 4.327609] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4)
<...>
Example of fixed log (debug on)
<...>
[ 3731.333183] i2c_hid i2c-ITE33D1:00: input: 02 00
[ 3731.333581] i2c_hid i2c-ITE33D1:00: input: 02 00
[ 3731.333842] i2c_hid i2c-ITE33D1:00: input: 02 00
[ 3731.334107] i2c_hid i2c-ITE33D1:00: input: 02 00
[ 3731.334367] i2c_hid i2c-ITE33D1:00: input: 02 00
<...>
[jkosina@suse.cz: rebase onto more recent codebase]
Signed-off-by: Pavel Balan <admin@kryma.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Thu, 24 Oct 2019 11:59:09 +0000 (13:59 +0200)]
HID: asus: Ignore Asus vendor-page usage-code 0xff events
[ Upstream commit
c07a0254c89e4bb69ca781cd488baa5b628e2754 ]
At least on a T100HA an Asus vendor-page usage-code 0xff event is send on
every suspend and again on resume, resulting in the following warning:
asus 0003:0B05:1807.0002: Unmapped Asus vendor usagepage code 0xff
being logged twice on every suspend/resume.
This commit silences the "Unmapped Asus vendor usagepage code ..."
warning for usage-code 0xff to avoid these warnings being logged.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Tue, 19 Nov 2019 14:57:11 +0000 (15:57 +0100)]
HID: ite: Add USB id match for Acer SW5-012 keyboard dock
[ Upstream commit
8f18eca9ebc57d6b150237033f6439242907e0ba ]
The Acer SW5-012 2-in-1 keyboard dock uses a Synaptics S91028 touchpad
which is connected to an ITE 8595 USB keyboard controller chip.
This keyboard has the same quirk for its rfkill / airplane mode hotkey as
other keyboards with the ITE 8595 chip, it only sends a single release
event when pressed and released, it never sends a press event.
This commit adds this keyboards USB id to the hid-ite id-table, fixing
the rfkill key not working on this keyboard.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Priit Laes [Sat, 30 Nov 2019 22:22:09 +0000 (00:22 +0200)]
HID: Add quirk for Xin-Mo Dual Controller
[ Upstream commit
c62f7cd8ed066a93a243643ebf57ca99f754388e ]
Without the quirk, joystick shows up as single controller
for both first and second player pads/pins.
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Wed, 27 Nov 2019 01:54:09 +0000 (17:54 -0800)]
arc: eznps: fix allmodconfig kconfig warning
[ Upstream commit
1928b36cfa4df1aeedf5f2644d0c33f3a1fcfd7b ]
Fix kconfig warning for arch/arc/plat-eznps/Kconfig allmodconfig:
WARNING: unmet direct dependencies detected for CLKSRC_NPS
Depends on [n]: GENERIC_CLOCKEVENTS [=y] && !PHYS_ADDR_T_64BIT [=y]
Selected by [y]:
- ARC_PLAT_EZNPS [=y]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Ofer Levi <oferle@mellanox.com>
Cc: linux-snps-arc@lists.infradead.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>