Jaehoon Chung [Wed, 18 Dec 2019 23:42:11 +0000 (08:42 +0900)]
ARM: config: tizen_bcm2711: Enable config relevant to DM-verity
Enable config relevant to DM-verity by default.
It doesn't affect anything until control dm-verity on System side.
Change-Id: Ia1121b170c12748ed09797188c8bb166a6efec2c
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Junghoon Kim [Wed, 18 Dec 2019 00:49:11 +0000 (09:49 +0900)]
scripts: mkbootimg_rpi4.sh: Create boot tarball for the lthor flashing
This patch is to create boot tarball for the lthor flashing. With this,
we can easily test the rpi4 kernel in the local environment.
Change-Id: Iaf16cf1ae22f8b882fac7156c6ca499593f9539d
Signed-off-by: Junghoon Kim <jhoon20.kim@samsung.com>
Junghoon Kim [Tue, 17 Dec 2019 05:28:08 +0000 (14:28 +0900)]
ARM: tizen_bcm2711_defconfig: Enable btrfs filesystem
Enable btrfs filesystem to use it as the rootfs mount for the RPI4 board.
Change-Id: I19a9b0acfa25c906ddc557c0f191958aa29f8636
Signed-off-by: Junghoon Kim <jhoon20.kim@samsung.com>
Jaehoon Chung [Tue, 17 Dec 2019 00:48:54 +0000 (09:48 +0900)]
ARM: dts: bcm2711-rpi-4-b: Enable usb node to use peripheral mode
Enable usb node to use peripheral mode.
It's also used on U-boot side when thor mode is run.
Change-Id: I2e915ef05edfac493ab4c71f648b6daf509d867f
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Seung-Woo Kim [Thu, 5 Dec 2019 07:52:29 +0000 (16:52 +0900)]
drm/vc4: fix wrong filp usage in gem_info debugfs node
After the mainline commit
65101d8c9108 ("drm/vc4: Expose
performance counters to userspace") applied in v4.17, vc4 drm
has its own filp. So gem_info filp usage is not proper. Fix the
wrong filp usage in gem_info debugfs node.
Change-Id: I526a888f345378d66f96e9d6cd3d19527e56ddaa
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Hoegeun Kwon [Mon, 2 Dec 2019 00:50:36 +0000 (09:50 +0900)]
scripts: mkbootimg_rpi4.sh: Remove cmdline.txt
The cmdline.txt file is unnecessary so remove it in the script also
delete real file.
Change-Id: Ia02af211e9e46df1de413c3c9724cc54d82fcd10
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Mon, 2 Dec 2019 00:46:43 +0000 (09:46 +0900)]
scripts: mkbootimg_rpi4.sh: Add u-boot-rpi4 package to boot image
Add u-boot-rpi4 package to boot.img for u-boot boot
Change-Id: Iba486d729b5aa6c8a570db2b0854c922b5b909f6
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Wed, 27 Nov 2019 07:41:21 +0000 (16:41 +0900)]
ARM: dts: bcm2711-rpi-4-b: Add support for touchscreen touch
Add dts to support the official RPI touchscreen LCD.
Change-Id: I78baf521954a3929dd17f29bac9a2a34c66e71ff
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Jaehoon Chung [Tue, 26 Nov 2019 08:06:28 +0000 (17:06 +0900)]
ARM: dts: bcm2711-rpi-4-b: Add cts pin setting for bluetooth uart
This patch is referred to bcm2710-rpi-3-b-plus.dts.
The below is its commit-msg:
There is missing cts pin for uart0 used by bluetooth. Add the cts pin
setting as like bcm2837-rpi-3-b-plus.
Change-Id: I3e206b00145c24ddc86ad9dc57bef6f683622285
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Hoegeun Kwon [Fri, 8 Nov 2019 01:53:40 +0000 (10:53 +0900)]
rpi4: boot: Enable u-boot booting
Use u-boot for booting, enable u-boot.
Change-Id: I0c82be9e06b3d74a091f730ee3339a50582debe8
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Jaechul Lee [Wed, 6 Nov 2019 05:37:17 +0000 (14:37 +0900)]
ARM: tizen_bcm2711_defconfig: Adds USB_AUDIO configure
Change-Id: Icc1084325200ff7ef8e9d1ff3d9469bdc51c4b51
Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>
Hoegeun Kwon [Mon, 4 Nov 2019 09:19:38 +0000 (18:19 +0900)]
rpi4: boot: Update the firmwares for kernel v4.19.81
Update the firmwares with the latest version from the vendor git repo.
The commit base is "
b79618b5db4 kernel: Bump to 4.19.81"
Change-Id: Ica3af05ac507e3834a013d135149542723218cba
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Mon, 4 Nov 2019 09:10:59 +0000 (18:10 +0900)]
packaging: Change the kernel version of the spec file
This patch changes the kernel version of the spec file to 4.19.81.
Change-Id: Ic7789806d6418ba0cf66e3e93bc48eeb39289a7b
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Jaechul Lee [Mon, 4 Nov 2019 07:16:17 +0000 (16:16 +0900)]
arm: dts: bcm2711-rpi-4-b: Adds buttons for speaker profile
Tizen Speaker Profile uses a keypad that consists of 5 buttons for
up/down/left/right/center. The buttons are connected to GPIO pins as
follows.
GPIO16 : KEY_VOLUMEUP
GPIO13 : KEY_VOLUMEDOWN
GPIO6 : KEY_FASTFORWARD
GPIO12 : KEY_REWIND
GPIO25 : KEY_PLAYPAUSE
Change-Id: Iadaa10478c32517ae09c1c10f1d29d0f2518bfb5
Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>
Jaechul Lee [Mon, 4 Nov 2019 07:09:25 +0000 (16:09 +0900)]
arm: dts: bcm2711-rpi-4-b: Adds respeaker 4mic nodes
adds respeaker 4mic nodes.
Change-Id: Ibf8ad7f7f8afbaf3cd9f994eb21f0d8a5a9033c2
Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>
Jaechul Lee [Tue, 29 Oct 2019 02:29:27 +0000 (11:29 +0900)]
ARM: dts: bcm2711-rpi-4-b: Enable dt nodes for audio, i2c1, spi0
audio, i2c1, spi0 nodes should be enabled as RPI3.
Change-Id: I8ea244b188ac8d1787c1340369f7aa90486f44d6
Reference:
5cf4f3e4 ("ARM: dts: bcm2710-rpi-3-b-plus: Enable dt nodes for audio, i2c1, spi0")
Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>
Hoegeun Kwon [Tue, 29 Oct 2019 03:25:24 +0000 (12:25 +0900)]
rpi4: boot: Fix hdmi group to DMT
There is a problem using the hdmi small monitors causes monitor to
freeze. So defines the HDMI output group DMT, set defualt mode 720p.
Change-Id: I070549ed36423755b7e8742b923f2ac18b8ccc5b
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Mon, 28 Oct 2019 08:18:09 +0000 (17:18 +0900)]
scripts: mkbootimg_rpi4.sh: Fix to install modules on non sudo
On sudo status, env variable is possible not to be preserved and
it causes failure on modules_install. So fix to install modules on
non sudo status and then move the directories and files to image
area.
[From repo of tizen rpi3:
89dcbe9b298c scripts: mkbootimg_rpi3.sh: Fix to install modules on non sudo status]
Change-Id: Ie7047c23762b668a08abf387dd76cf9cc8571937
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Mon, 28 Oct 2019 06:14:49 +0000 (15:14 +0900)]
rpi4: boot: Add to support mipi-csi camera module
Add to support mipi-csi camera module with the options, start_x=1
and disable_camera_led=1, in config.txt.
Change-Id: I450c291599031437a9fe58cac94a0d18c6cf58a9
Reference: https://www.raspberrypi.org/documentation/configuration/config-txt/boot.md
Reference: https://www.raspberrypi.org/documentation/configuration/config-txt/camera.md
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Hoegeun Kwon [Fri, 11 Oct 2019 08:01:22 +0000 (17:01 +0900)]
ARM: dts: bcm2711-rpi-4-b: Add support hdmi
Support for using hdmi based on v3d.
Change-Id: I1ea3551167d713f0ac64fe5cacbeefc2a439331e
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Tue, 17 Sep 2019 08:54:39 +0000 (17:54 +0900)]
scripts: mkbootimg_rpi4.sh: Remove rename for kernel7l.img.
Use origin kernel image name(zImage) because of specified kernel in
the config.txt file.
Change-Id: If4a255fb3b89a892a1e7305b6ae6a33829730ae5
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Jaehoon Chung [Wed, 11 Sep 2019 00:13:18 +0000 (09:13 +0900)]
rpi4: boot: add kernel name in config.txt
Add kernel name in config.txt.
Change-Id: Iff5b38da853a54296c2eef7b6d5eaf24761b22cf
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Wed, 11 Sep 2019 00:06:00 +0000 (09:06 +0900)]
Revert "packaging/rpi4: Add cmdline.txt, kernel image to spec file"
This reverts commit
e0d9fb53f6a30d29dad6bd965fa10b3753f8697b.
It doesn't need to use kernel.img. Tizen doesn't use as like kernel.
Just keep zImage as kernel image name.
Instead, add "kernel=zImage" config.txt file.
- Local build script is only generating zImage.
Change-Id: I2dbff125194491d5579b6e65412ec5a6306eb7fb
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Hoegeun Kwon [Wed, 4 Sep 2019 00:09:13 +0000 (09:09 +0900)]
usb: dwc_otg: Fix invalid pointer casting
Fix build warning about pointer cast.
Change-Id: I29b84d07152f9c1745685e156a53275b1e15b6eb
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Wed, 4 Sep 2019 00:10:25 +0000 (09:10 +0900)]
scripts: Remove the scripts for RPI3
Remove any RPI3 scripts, we don't need now.
Change-Id: I2b5f365fa363edd43abf35a740373ebdf03bf5ab
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Junghoon Kim [Tue, 3 Sep 2019 11:11:02 +0000 (20:11 +0900)]
rpi3: Remove the boot firmwares for RPI3
They also do not currently need to be kept in this repo. When the
linux-rpi3 repo is deprecated, it needs to be redefined.
Change-Id: I2025d32f7762ddf29860a8597cbc12dfae1d5019
Signed-off-by: Junghoon Kim <jhoon20.kim@samsung.com>
Jaehoon Chung [Tue, 3 Sep 2019 01:58:27 +0000 (10:58 +0900)]
packaging: remove linux-rpi3 spec file
It doesn't need to keep rpi3 spec.
If linux-rpi3 git is deprecated, it will be added at that time.
- To prevent confusion when packaging is generating.
Change-Id: Ifc87a8f4f022889a70366feb09d0e9bf37340222
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Tue, 3 Sep 2019 01:48:57 +0000 (10:48 +0900)]
packaging: remove unnecessary requirement
Remove unnecessary requirement instead of comment.
Change-Id: I891326a384fffd192d3cac4435116c82c95bc1e3
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Hoegeun Kwon [Mon, 2 Sep 2019 07:49:57 +0000 (16:49 +0900)]
packaging/rpi4: Add cmdline.txt, kernel image to spec file
Add cmdline.txt to spec file and rename kernel image to kernel7l.img.
Change-Id: I5dd2adf9a54c826f52d50b6950c8a95115c4b70e
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Mon, 2 Sep 2019 02:24:41 +0000 (11:24 +0900)]
rpi4: Remove unused files
Remove unused files in rpi4.
Change-Id: I29525779cf28c33e68da9ac22abd895b2711be8c
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Sun, 1 Sep 2019 23:53:48 +0000 (08:53 +0900)]
scripts: Add mkbootimg_rpi4.sh
This script is to make boot.img and modules.img for rpi4.
Change-Id: I1a57e86070b631ba032e9cd35282f192adc6f379
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Sun, 1 Sep 2019 23:50:45 +0000 (08:50 +0900)]
rpi4: Add cmdline.txt file
The cmdline.txt file is need for boot.
Change-Id: I2a6030c2beb5dae0f8607e9e22065aaa7bf5c81d
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Thu, 29 Aug 2019 07:59:28 +0000 (16:59 +0900)]
packaging: Add spec file for rpi4
This adds linux-rpi4.spec file for armv7l rpm packaging.
Change-Id: Ic9aef54edc5f1c718ba2c301e70a4d9ee79af35d
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Thu, 29 Aug 2019 06:50:07 +0000 (15:50 +0900)]
ARM: tizen_bcm2711_defconfig: Fix modules cleanup
Always used modules changed to built-in, also remove unused modules.
Change-Id: I9304cf746e5a7559659f11dd875e7c4eb2d54175
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Tue, 20 Aug 2019 05:35:10 +0000 (14:35 +0900)]
ARM: tizen_bcm2711_defconfig: Fix I2C config to built-in
Fix i2c configuration to built-in.
Change-Id: I91870db7c34635e623b8ae1a1c102c55f746d180
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Tue, 20 Aug 2019 02:17:43 +0000 (11:17 +0900)]
ARM: tizen_bcm2711_defconfig: Fix drm-vc4 to built-in
Fix drm-vc4 configuration to built-in and dependent configuration to
built-in.
Change-Id: I36ee27e9c42a9baccba4b6e022a78acbbe5ba025
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Wed, 14 Aug 2019 09:58:44 +0000 (18:58 +0900)]
tools: Add build script for ARM kernel of rpi4
Add build script for ARM kernel of rpi4.
Change-Id: I96cf3d55235a0a67d610bf87aa9ddf4f5e972411
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Wed, 14 Aug 2019 09:51:47 +0000 (18:51 +0900)]
ARM: tizen_bcm2711_defconfig: Disable bcm2708_fb
This driver is not used at tizen.
Change-Id: Ia524fc59c17ec11578a4366d173879fb40e0ab49
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Wed, 14 Aug 2019 09:44:09 +0000 (18:44 +0900)]
ARM: tizen_bcm2711_defconfig: Enable SMACK
It needs to enable configs related with SMACK for booting tizen
platform.
Change-Id: Ia304c703afc55d13dd2a8a7d14ad8de2c208c22b
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Wed, 14 Aug 2019 09:36:30 +0000 (18:36 +0900)]
ARM: tizen_bcm2711_defconfig: Remove unused module
This module is unused.
Change-Id: Ie3524be3337a590bfe53fa93830067318150ef56
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Wed, 14 Aug 2019 02:28:15 +0000 (11:28 +0900)]
ARM: defconfig: Add tizen_bcm2711_defconfig
tizen_bcm2711_defconfig is from bcm2711_defconfig.
Change-Id: I21d1d2c7e46e8ea4cfb34b5a4465a1c4eb62967b
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Wed, 14 Aug 2019 09:58:24 +0000 (18:58 +0900)]
rpi4: config: Enable serial
Add configration to enable serial in config.txt file.
Change-Id: Ibe5971e1f068a8ef13ec7bb4e16aa9cfe1ab5feb
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Wed, 14 Aug 2019 09:58:03 +0000 (18:58 +0900)]
rpi4: Add config.txt extracted from raspbian full binary
The config.txt file is needed at boot time. And this file from binary
(https://downloads.raspberrypi.org/raspbian_full)
Change-Id: I841b11a4b400e5b44a5ca75f2f14819a35997e5e
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Wed, 14 Aug 2019 09:55:53 +0000 (18:55 +0900)]
rpi4: Add boot files from github
We can get boot binaries that are necessary for booting from master
branch of https://github.com/raspberrypi/firmware.
The git base is the commit "
66bafab0055 kernel: Bump to 4.19.65"
Change-Id: Iba608e75426efcc1e45240ca532ec91807b4ce16
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Mon, 5 Aug 2019 01:49:32 +0000 (10:49 +0900)]
rpi3: boot: Update the firmwares for kernel v4.19.65
Update the firmwares with the latest version from the vendor git repo.
The commit base is "
66bafab0055 kernel: Bump to 4.19.65"
Change-Id: I3265ba8630f4bdb8a5cf4151c2662a6e12c51084
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Mon, 5 Aug 2019 01:49:25 +0000 (10:49 +0900)]
packaging: Change the kernel version of the spec file
This patch changes the kernel version of the spec file to 4.19.65.
Change-Id: I9b5c18180d19ba68c150342dc8772e3cf12856ec
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Seung-Woo Kim [Wed, 28 Aug 2019 08:13:22 +0000 (17:13 +0900)]
ARM: configs: tizen_bcm2709_defconfig: Enable NETFILTER_XT_MATCH_LIMIT
From Tizen network security, NETFILTER_XT_MATCH_LIMIT is used for
ipv6. So enable NETFILTER_XT_MATCH_LIMIT config option.
Change-Id: Ife75ee0a766c64fb38a0e261f41a45678ab49bd4
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Wed, 28 Aug 2019 08:11:56 +0000 (17:11 +0900)]
ARM64: configs: tizen_bcmrpi3_defconfig: Enable NETFILTER_XT_MATCH_LIMIT
From Tizen network security, NETFILTER_XT_MATCH_LIMIT is used for
ipv6. So enable NETFILTER_XT_MATCH_LIMIT config option.
Change-Id: Ieeba2c67481e299fb3d91ee4378f8b2a2baffc7b
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Wed, 31 Jul 2019 08:01:06 +0000 (17:01 +0900)]
ARM: configs: tizen_bcm2709_defconfig: Enable NETFILTER_XT_MATCH_OWNER config
Enable the NETFILTER_XT_MATCH_OWNER config option to use xt_owner
supplementary groups.
Change-Id: I10a8277e2c42cae8cd02eb892e2dac5124681a71
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Wed, 31 Jul 2019 08:00:32 +0000 (17:00 +0900)]
ARM64: configs: tizen_bcmrpi3_defconfig: Enable NETFILTER_XT_MATCH_OWNER config
Enable the NETFILTER_XT_MATCH_OWNER config option to use xt_owner
supplementary groups.
Change-Id: I1baf6d78dc7c28d7235bb1cce9b6132b2fba7148
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Thu, 25 Jul 2019 07:34:59 +0000 (16:34 +0900)]
ARM: dts: bcm2710-rpi-3-b-plus: remove duplicated uart0_ctsrts_gpio30 node
The commit
ad3b011329c8 ("ARM: dts: bcm2710-rpi-3-b-plus: Add cts
pin setting for bluetooth uart") introduced duplicated dt node,
uart0_ctsrts_gpio30, because it is already defined in bcm283x.dtsi.
Remove the duplicated dt node.
Change-Id: Ic9a39b88662198f30b585f48f2f0e896b62ab8f3
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
DoHyun Pyun [Thu, 25 Jul 2019 03:45:21 +0000 (12:45 +0900)]
Revert "Bluetooth : Set the optimized operation speed for BCM Uart"
This reverts commit
5cc55680fc9fe5bfd7590905c56e55dfa4aefbd5.
The proper operation speed of the RPI3 Uart is different for
each HW revision. So we will set the value in the user space's
firmware downloading tool after checking the HW version.
Change-Id: I95d80f3598015a27fbdc1375b3d6c089be67b8d0
Signed-off-by: DoHyun Pyun <dh79.pyun@samsung.com>
Seung-Woo Kim [Tue, 23 Jul 2019 09:31:05 +0000 (18:31 +0900)]
ARM: dts: bcm2710-rpi-3-b-plus: Add cts pin setting for bluetooth uart
There is missing cts pin for uart0 used by bluetooth. Add the cts
pin setting as like bcm2837-rpi-3-b-plus.
Change-Id: Iefdf80ec0d523b85f7a6e579e1544a67b9139212
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Tue, 23 Jul 2019 01:28:13 +0000 (10:28 +0900)]
packaging: Add _wrong_version_format_terminate_build macro
Newer version of rpmbuild rejects double dash, "-", in version.
To support the style, add _worng_version_format_terminate_build
as 0.
Change-Id: Ieed243fb4ad7059b83d5328f0c38b15e4c74dc0e
Reference: https://github.com/rpm-software-management/rpm/commit/
5e94633660d0e2b97
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Mon, 22 Jul 2019 06:00:12 +0000 (15:00 +0900)]
packaging: remove macro in package Name
Some build system cannot recognize macro in package Name. Remove
the macro by replacing with same string.
Change-Id: I34c853be82476db3b32d49aadc77809a2f493436
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
DoHyun Pyun [Wed, 17 Jul 2019 07:08:46 +0000 (16:08 +0900)]
Bluetooth : Set the optimized operation speed for BCM Uart
When ACL data packet transfers via Uart on the RPI3 board,
the packet loss or overflow issue is occured. After adjusting
the operation speed value, we can reduce these problems.
Change-Id: Id072102e173e0338c4ae3cb7a1a541fbf7f8066e
Signed-off-by: DoHyun Pyun <dh79.pyun@samsung.com>
Seung-Woo Kim [Wed, 17 Jul 2019 01:56:16 +0000 (10:56 +0900)]
Bluetooth: fix wrong indent in __hci_req_update_{scan/adv}_rsp_data()
The commit
ac160e08af69 ("Bluetooth: Add Advertising Packet
Configuration") introduces wrong indent which causes build warning for
gcc-7. Fix the wrong indent.
Change-Id: Ia0bde8a8f9660ccf8fa312e3c3ec6c8cb76863f1
Fixes:
ac160e08af69 ("Bluetooth: Add Advertising Packet Configuration")
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Fri, 12 Jul 2019 05:13:37 +0000 (14:13 +0900)]
ARM64: configs: tizen_bcmrpi3_defconfig: Enable BCM Uart protocol
RPI3 target uses the BCM BT chip of the Uart type. To avoid the
reassembly failed problem, we should enable BCM Uart protocol
and need to use it. It is enabled with CONFIG_SERIAL_DEV_BUS.
Change-Id: I960ddb6f6b3cb64261ebcdc750771943697948ae
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
DoHyun Pyun [Fri, 12 Jul 2019 04:45:10 +0000 (13:45 +0900)]
ARM: configs: tizen_bcm2709_defconfig: Enable BCM Uart protocol
RPI3 target uses the BCM BT chip of the Uart type. To avoid the
reassembly failed problem, we should enable BCM Uart protocol
and need to use it. It is enabled with CONFIG_SERIAL_DEV_BUS.
Change-Id: I3cf97b032e1ce92898f2329fae3691d4d5870726
Signed-off-by: DoHyun Pyun <dh79.pyun@samsung.com>
[sw0312.kim: adjust defconfig with savedefconfig and update commit-msg]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Hoegeun Kwon [Thu, 4 Jul 2019 08:42:52 +0000 (17:42 +0900)]
ARM: dts: bcm27xx: Fix to of_graph from bridge node for touchscreen
Beginning with kernel v4.15, the i2c management of the touchscreen
panel driver has been changed to use of_graph from brdge node. So
change to of_graph and remove the unnecessary nodes.
Change-Id: I6ef786ed472ef2b350eb8683568d0ecb407182c0
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Thu, 4 Jul 2019 08:40:58 +0000 (17:40 +0900)]
drm/vc4: Fix change to find_panel in the dsi_attach func
There is a problem that crtc does not bind while continuously
requesting EPROBE_DEFER, if dsi_bind does not successfully bind.
We need to change the part of find_panel in bind to dsi_attach
function.
Change-Id: Ifce518f047f496079eb8fbe112dabbd9bc7488bb
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Pablo Neira Ayuso [Fri, 7 Jun 2019 14:37:30 +0000 (16:37 +0200)]
netfilter: xt_owner: bail out with EINVAL in case of unsupported flags
Reject flags that are not supported with EINVAL.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[sw0312.kim: backport from mainline to apply supplementary groups on netfilter]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Change-Id: Id867ca48290a8e6627ad7d1b1f159669fc5c44a1
Lukasz Pawelczyk [Fri, 10 May 2019 11:46:22 +0000 (13:46 +0200)]
netfilter: xt_owner: Add supplementary groups option
The XT_OWNER_SUPPL_GROUPS flag causes GIDs specified with XT_OWNER_GID
to be also checked in the supplementary groups of a process.
f_cred->group_info cannot be modified during its lifetime and f_cred
holds a reference to it so it's safe to use.
Signed-off-by: Lukasz Pawelczyk <l.pawelczyk@samsung.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[sw0312.kim: backport from mainline to apply supplementary groups on netfilter]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Change-Id: I7a21fc112cde77ae708b84d4b48c8aee339a7642
Hoegeun Kwon [Wed, 3 Jul 2019 05:16:46 +0000 (14:16 +0900)]
ARM: configs: tizen_bcm2709_defconfig: Remove unused modules
Remove unused modules from the backlight.
Change-Id: I1fd5267690efd4a7bd5137b64dfadba5111dc2dd
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
DoHyun Pyun [Thu, 4 Jul 2019 00:18:21 +0000 (09:18 +0900)]
Bluetooth: Fix the potential crash issue
There is a logic error in the event function. We should
check the callback function's parameter before calling.
Change-Id: I06a4a8c50317e5ec4ae8fe35e4b788105e090196
Fixes:
bde01c80dd51 ("Bluetooth: Set le data length command and event")
Signed-off-by: DoHyun Pyun <dh79.pyun@samsung.com>
Hoegeun Kwon [Wed, 3 Jul 2019 05:18:50 +0000 (14:18 +0900)]
tools: Add build script for ARM kernel of rpi3
Add build script for ARM kernel of rpi3.
Change-Id: I35a7dd2148350f775d3d96a478dac66190079d68
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Wed, 3 Jul 2019 10:22:11 +0000 (19:22 +0900)]
Revert "ARM: dts: bcm27xx: Fix to of_graph from bridge node for panel"
This reverts commit
b2f6ad21a0bab8e59926666f717a4f6c53066a2d.
There is a problem with the hdmi and revert the patch.
Change-Id: Ia69d10c067ff69d192162b0598f43028c4a05f9b
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Tue, 2 Jul 2019 02:08:59 +0000 (11:08 +0900)]
ARM: dts: bcm27xx: Fix to of_graph from bridge node for panel
Beginning with kernel v4.15, the i2c management of the touchscreen
panel driver has been changed to use of_graph from brdge node. So
change to of_graph and remove the unnecessary nodes.
Change-Id: Ibf131aebd964360874ebe2f3792f0912f6e8988d
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Sudha Bheemanna [Fri, 16 Sep 2016 10:07:22 +0000 (15:37 +0530)]
Bluetooth: Set le data length command and event
Sets the data length for the le data packet with in the
advised limits. MGMT command and event are added to handle
the setting of data length.
Change-Id: Ia5c2167743cc9a29190e5631973e9d52d41caa1d
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Fri, 16 Sep 2016 07:24:31 +0000 (12:54 +0530)]
Bluetooth: Read host suggested default le data length
This patch adds MGMT command and code for supporting reading
default le data length value set at the controller.
Change-Id: I2b81982dc26ed5af4a8f8a3d3913db5d64625260
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Fri, 16 Sep 2016 06:39:57 +0000 (12:09 +0530)]
Bluetooth: Write host suggested default le data length
This patch adds MGMT command and code for supporting write
default le data length command to the controller.
Change-Id: I3d2c8b622b7913a3ed542342e3ba8076c30dc279
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Fri, 16 Sep 2016 05:08:30 +0000 (10:38 +0530)]
Bluetooth: Read LE Max data length command
This patch adds the MGMT command and code to support reading
the maximum data length supported command for LE.
Change-Id: I4dc0041f2070de2ccb6a4164c8823612863c941e
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
h.sandeep [Fri, 16 Sep 2016 09:15:24 +0000 (14:45 +0530)]
Bluetooth: Fix IPSP connection callback event issue.
This patch fixes the IPSP connection callback event issue
between kernel and bluez layer.
Change-Id: Ia4d625aa8a6dbc9da89a7d9f12308af9c90d0594
Signed-off-by: h.sandeep <h.sandeep@samsung.com>
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 15 Sep 2016 07:23:03 +0000 (12:53 +0530)]
Bluetooth: IPSP Connect/Disconnect apis
This patch adds MGMT code to support IPSP connect and
disconnect apis and handle connection state changed event.
Change-Id: I1c41ec4f38cf9a108e443def3bc23c1b964e2985
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 15 Sep 2016 04:42:09 +0000 (10:12 +0530)]
Bluetooth: Add support to enable/disable IPSP
This patch supports MGMT commands and code to enable or disable
IPSP 6LowPan features.
Change-Id: Ia866ecfa517c7d7e4320f17d94d80dfeb9261e59
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 10:51:01 +0000 (16:21 +0530)]
Bluetooth: Fix issue in the Set LE privacy function.
This patch fixes not to check the hdev power before setting
LE Privacy.
Change-Id: I344ea13b1d90527e3e7554ec616cdc640b85159c
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Mon, 12 Sep 2016 07:16:44 +0000 (12:46 +0530)]
Bluetooth: Store the key if auth type is P192
This patch allows to store the key after authentication
if auth type is "HCI_LK_AUTH_COMBINATION_P192"
Change-Id: Ie44dbe7dfec361edab61aceaf9b2ca4057b88fa5
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 11:31:39 +0000 (17:01 +0530)]
Bluetooth: Cancel the Sniff timer
This patch adds code to cancel the sniff timer.
Change-Id: I756d3b08acf6462044d1fb204064fe12ce1238c1
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 11:10:50 +0000 (16:40 +0530)]
Bluetooth: Enable sniff mode for incoming connection
Add provision to set the link poilicy to enable sniff mode
for incoming connection.
Change-Id: Ifff9e9f0838f26a6c96d81f4cbaae43429aa231f
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 10:31:23 +0000 (16:01 +0530)]
Bluetooth: Modify fast connectable type.
This patch modifies the fast connectable function
to just set the type.
Change-Id: I0cce96f85d823f9798ae7f147c4e33ce7b18e0e3
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 09:41:28 +0000 (15:11 +0530)]
Bluetooth: Send Authentication Request command on pairing failure
This patch allows to send HCI_OP_AUTH_REQUESTED command
to the remote device if pairing failure happens because
of pin or key missing error.
Change-Id: I9c28394dc06b22fd5fe9e58ac0b7d728c086bde4
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 09:24:54 +0000 (14:54 +0530)]
Bluetooth: Enable inquiry and page scan
This patch enables the inquiry and page scan after ACL
disconnection with one device and if there are no other
devices connected.
Change-Id: Ifb28be7d23f237d35112b2e0739ed55169baacf7
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 07:34:11 +0000 (13:04 +0530)]
Bluetooth: Change authentication requirement.
This patch updates the authentication requirement to general
MITM if local and remote device IO capabilities are not
NO_INPUT_NO_OUTPUT.
Change-Id: Ie3955c3f8287418e74af20d40bdf30d0f1963e31
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 06:54:43 +0000 (12:24 +0530)]
Bluetooth: Set link Supervision timeout for a connection
This patch allows to set the supervision timeout for a connection
if the device role is master.
Change-Id: I7897167ec07803f3059f2ab4d3314b0b7a951533
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 05:51:06 +0000 (11:21 +0530)]
Bluetooth: Set filter policy for LE connection
This patch sets the filter policy to a default value 0x01 during
LE auto connection if the destination address is not set. And it
updates the destination address once the LE connection complete
event is recieved during LE auto connection. And for it checks
valid destination address before cancelling LE connection when
connection timeout occurs.
Change-Id: I9877556c0b0ab4826f5f4934ead4d85b7837036d
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
[squash patches, LE connection policy, set dest address and check dest address before cancelling connection]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Wed, 7 Sep 2016 09:52:08 +0000 (15:22 +0530)]
Bluetooth: Get Advertising TX power
This patch adds MGMT command to read the advertising TX power.
Change-Id: Ide9e5d332f034928d2eae2cbd68a025a0d42be1b
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 07:07:45 +0000 (12:37 +0530)]
Bluetooth: Set the link for SCO connection
This patch sets the link policy for SCO/eSCO connection.
Change-Id: I71caef5a3887f73a10329b6886c8cf52b80e8d37
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
[add link policy setting in sco connection]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Tue, 6 Sep 2016 11:08:36 +0000 (16:38 +0530)]
Bluetooth: Add MGMT command to set SCO settings
Added code to set sco settings.
Change-Id: I37aa572436241b06e00d1e9e75964aac747eeba5
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
[remove sco link policy part]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 05:01:17 +0000 (10:31 +0530)]
Bluetooth: Add multiple LE advertise state change event
This patch adds code for providing multiple LE advertisement state
changed event to upper layer.
Change-Id: I58fb8044e74402376ec30b121081edce7c8709d1
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
[divide hci_vendor_mutli_adv_state_change_evt and remove hci event structure from mgmt]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 04:40:03 +0000 (10:10 +0530)]
Bluetooth: Add LE device found MGMT event
This patch adds new MGMT event for LE device discovery and allows
the handling of all advertisement packets in platform.
Change-Id: I1927acb75eff0b60a5899898c6d7a000e1a108ef
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Seung-Woo Kim [Wed, 28 Sep 2016 16:59:05 +0000 (01:59 +0900)]
Bluetooth: fix vendor ext rssi link alert event
This patch fixes style for rssi link alert event from vendor
specific group ext.
Change-Id: I0e7003e417c5f5a590cce8264caccad515dd3c10
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Wed, 7 Sep 2016 11:17:58 +0000 (16:47 +0530)]
Bluetooth: Add H/W TX timeout error MGMT event
This patch sends the H/W TX timeout error MGMT event if HCI command
timeout occurs after sending HCI commands.
Change-Id: I5eb593f2fe4d31c404dd94ef582790e47d03b10a
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Wed, 7 Sep 2016 10:12:22 +0000 (15:42 +0530)]
Bluetooth: Add hardware error MGMT event
Add code to handle hardware error MGMT event.
Change-Id: I5875ea2aeae7aba95c1f8e15b456704dc6bcdee4
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 05:26:15 +0000 (10:56 +0530)]
Bluetooth: Add LE vendor specific event handler
This patch adds the vendor specific LE meta event handler.
It handles the vendor specific handles like,
LE_MULTI_ADV_STATE_CHANGE_SUB_EVENT, LE_RSSI_LINK_ALERT.
Change-Id: I1f344a31e36f9c7442fe0bd8b598e67d9f5fb9bf
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
[divide hci vendor speicif group event function]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 25 Aug 2016 07:16:07 +0000 (12:46 +0530)]
Bluetooth: Add set LE scan parameter feature
Added new MGMT command to set LE scan parameters
Change-Id: I5ea660f97e93dfcc72273971ad0250e7f582f718
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 25 Aug 2016 06:43:09 +0000 (12:13 +0530)]
Bluetooth: Set Manufacturer data feature
Added new MGMT command to set the manufacturer data
in the BR/EDR packet.
Change-Id: Ie08062f4cad0c676deab94fd95fdc1a8c5602135
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 25 Aug 2016 06:28:22 +0000 (11:58 +0530)]
Bluetooth: Add LE connection parameter update procedure
Added new MGMT command to update LE connection parameters
Change-Id: I6ae16513437cd42d40e75958aa8415baa1cbedbb
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 25 Aug 2016 06:11:34 +0000 (11:41 +0530)]
Bluetooth: Add stop LE auto connection feature
Added new MGMT command to disable LE auto connection.
Change-Id: I1f5f61b83227501ad54019008b405fd47fd722a3
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 25 Aug 2016 05:53:02 +0000 (11:23 +0530)]
Bluetooth: Add BT LE discovery feature
This patch adds new MGMT commands to start LE discovery separately
and handles LE discovery state.
Change-Id: I85958b8c2b5c7e28f57c69e86037ab1e61a75db0
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 25 Aug 2016 04:47:19 +0000 (10:17 +0530)]
Bluetooth: Update device name on remote_name_event
This patch updates the device name on receiving the HCI event
remote_name_event during connection establishment.
Change-Id: I9a217e6760b1803a70af201a3f6903e722079749
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
projects / platform / kernel / linux-rpi.git / log