review.tizen.org Git - platform/kernel/linux-starfive.git/log

f2fs: keep lazytime on remount

This patch fixes losing lazytime when remounting f2fs.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: fix missing up_read

This patch fixes missing up_read call.

Fixes: c9b60788fc76 ("f2fs: fix to do sanity check with block address in main area")
Cc: <stable@vger.kernel.org> # 4.19+
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: return correct errno in f2fs_gc

This fixes overriding error number in f2fs_gc.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: avoid f2fs_bug_on if f2fs_get_meta_page_nofail got EIO

This patch avoids BUG_ON when f2fs_get_meta_page_nofail got EIO during
xfstests/generic/475.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: mark inode dirty explicitly in recover_inode()

Mark inode dirty explicitly in the end of recover_inode() to make sure
that all recoverable fields can be persisted later.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: fix to recover inode's crtime during POR

Testcase to reproduce this bug:
1. mkfs.f2fs -O extra_attr -O inode_crtime /dev/sdd
2. mount -t f2fs /dev/sdd /mnt/f2fs
3. touch /mnt/f2fs/file
4. xfs_io -f /mnt/f2fs/file -c "fsync"
5. godown /mnt/f2fs
6. umount /mnt/f2fs
7. mount -t f2fs /dev/sdd /mnt/f2fs
8. xfs_io -f /mnt/f2fs/file -c "statx -r"

stat.btime.tv_sec = 0
stat.btime.tv_nsec = 0

This patch fixes to recover inode creation time fields during
mount.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: fix to recover inode's i_gc_failures during POR

inode.i_gc_failures is used to indicate that skip count of migrating
on blocks of inode, we should guarantee it can be recovered in sudden
power-off case.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: fix to recover inode's i_flags during POR

Testcase to reproduce this bug:
1. mkfs.f2fs /dev/sdd
2. mount -t f2fs /dev/sdd /mnt/f2fs
3. touch /mnt/f2fs/file
4. sync
5. chattr +A /mnt/f2fs/file
6. xfs_io -f /mnt/f2fs/file -c "fsync"
7. godown /mnt/f2fs
8. umount /mnt/f2fs
9. mount -t f2fs /dev/sdd /mnt/f2fs
10. lsattr /mnt/f2fs/file

-----------------N- /mnt/f2fs/file

But actually, we expect the corrct result is:

-------A---------N- /mnt/f2fs/file

The reason is we didn't recover inode.i_flags field during mount,
fix it.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: fix to recover inode's project id during POR

Testcase to reproduce this bug:
1. mkfs.f2fs -O extra_attr -O project_quota /dev/sdd
2. mount -t f2fs /dev/sdd /mnt/f2fs
3. touch /mnt/f2fs/file
4. sync
5. chattr -p 1 /mnt/f2fs/file
6. xfs_io -f /mnt/f2fs/file -c "fsync"
7. godown /mnt/f2fs
8. umount /mnt/f2fs
9. mount -t f2fs /dev/sdd /mnt/f2fs
10. lsattr -p /mnt/f2fs/file

0 -----------------N- /mnt/f2fs/file

But actually, we expect the correct result is:

1 -----------------N- /mnt/f2fs/file

The reason is we didn't recover inode.i_projid field during mount,
fix it.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: update i_size after DIO completion

This is related to
ee70daaba82d ("xfs: update i_size after unwritten conversion in dio completion")

If we update i_size during dio_write, dio_read can read out stale data, which
breaks xfstests/465.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: report ENOENT correctly in f2fs_rename

This fixes wrong error report in f2fs_rename.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: fix remount problem of option io_bits

Currently we show mount option "io_bits=%u" as "io_size=%uKB",
it will cause option parsing problem(unrecognized mount option)
in remount.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: fix to recover inode's uid/gid during POR

Step to reproduce this bug:
1. logon as root
2. mount -t f2fs /dev/sdd /mnt;
3. touch /mnt/file;
4. chown system /mnt/file; chgrp system /mnt/file;
5. xfs_io -f /mnt/file -c "fsync";
6. godown /mnt;
7. umount /mnt;
8. mount -t f2fs /dev/sdd /mnt;

After step 8) we will expect file's uid/gid are all system, but during
recovery, these two fields were not been recovered, fix it.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: avoid infinite loop in f2fs_alloc_nid

If we have an error in f2fs_build_free_nids, we're able to fall into a loop
to find free nids.

Suggested-by: Chao Yu <chao@kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: add new idle interval timing for discard and gc paths

This helps to control the frequency of submission of discard and
GC requests independently, based on the need.

Suggested-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: split IO error injection according to RW

This patch adds to support injecting error for write IO, this can simulate
IO error like fail_make_request or dm_flakey does.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: add SPDX license identifiers

Remove the verbose license text from f2fs files and replace them with
SPDX tags. This does not change the license of any of the code.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: surround fault_injection related option parsing using CONFIG_F2FS_FAULT_INJECTION

It's a little bit strange when fault_injection related
options fail with -EINVAL which were already disabled
from config, so surround all fault_injection related option
parsing code using CONFIG_F2FS_FAULT_INJECTION. Meanwhile,
slightly change warning message to keep consistency with
option POSIX_ACL and FS_XATTR.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: fix setattr project check upon fssetxattr ioctl

Currently, project quota could be changed by fssetxattr
ioctl, and existed permission check inode_owner_or_capable()
is obviously not enough, just think that common users could
change project id of file, that could make users to
break project quota easily.

This patch try to follow same regular of xfs project
quota:

"Project Quota ID state is only allowed to change from
within the init namespace. Enforce that restriction only
if we are trying to change the quota ID state.
Everything else is allowed in user namespaces."

Besides that, check and set project id'state should
be an atomic operation, protect whole operation with
inode lock.

Signed-off-by: Wang Shilong <wshilong@ddn.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: avoid sleeping under spin_lock

In the call trace below, we might sleep in function dput().

So in order to avoid sleeping under spin_lock, we remove f2fs_mark_inode_dirty_sync
from __try_update_largest_extent && __drop_largest_extent.

BUG: sleeping function called from invalid context at fs/dcache.c:796
Call trace:
dump_backtrace+0x0/0x3f4
show_stack+0x24/0x30
dump_stack+0xe0/0x138
___might_sleep+0x2a8/0x2c8
__might_sleep+0x78/0x10c
dput+0x7c/0x750
block_dump___mark_inode_dirty+0x120/0x17c
__mark_inode_dirty+0x344/0x11f0
f2fs_mark_inode_dirty_sync+0x40/0x50
__insert_extent_tree+0x2e0/0x2f4
f2fs_update_extent_tree_range+0xcf4/0xde8
f2fs_update_extent_cache+0x114/0x12c
f2fs_update_data_blkaddr+0x40/0x50
write_data_page+0x150/0x314
do_write_data_page+0x648/0x2318
__write_data_page+0xdb4/0x1640
f2fs_write_cache_pages+0x768/0xafc
__f2fs_write_data_pages+0x590/0x1218
f2fs_write_data_pages+0x64/0x74
do_writepages+0x74/0xe4
__writeback_single_inode+0xdc/0x15f0
writeback_sb_inodes+0x574/0xc98
__writeback_inodes_wb+0x190/0x204
wb_writeback+0x730/0xf14
wb_check_old_data_flush+0x1bc/0x1c8
wb_workfn+0x554/0xf74
process_one_work+0x440/0x118c
worker_thread+0xac/0x974
kthread+0x1a0/0x1c8
ret_from_fork+0x10/0x1c

Signed-off-by: Zhikang Zhang <zhangzhikang1@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: plug readahead IO in readdir()

Add a plug to merge readahead IO in readdir(), expecting it can
reduce bio count before submitting to block layer.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: fix to do sanity check with current segment number

https://bugzilla.kernel.org/show_bug.cgi?id=200219

Reproduction way:
- mount image
- run poc code
- umount image

F2FS-fs (loop1): Bitmap was wrongly set, blk:15364
------------[ cut here ]------------
kernel BUG at /home/yuchao/git/devf2fs/segment.c:2061!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 2 PID: 17686 Comm: umount Tainted: G        W  O      4.18.0-rc2+ #39
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
EIP: update_sit_entry+0x459/0x4e0 [f2fs]
Code: e8 1c b5 fd ff 0f 0b 0f 0b 8b 45 e4 c7 44 24 08 9c 7a 6c f8 c7 44 24 04 bc 4a 6c f8 89 44 24 0c 8b 06 89 04 24 e8 f7 b4 fd ff <0f> 0b 8b 45 e4 0f b6 d2 89 54 24 10 c7 44 24 08 60 7a 6c f8 c7 44
EAX: 00000032 EBX: 000000f8 ECX: 00000002 EDX: 00000001
ESI: d7177000 EDI: f520fe68 EBP: d6477c6c ESP: d6477c34
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010282
CR0: 80050033 CR2: b7fbe000 CR3: 2a99b3c0 CR4: 000406f0
Call Trace:
f2fs_allocate_data_block+0x124/0x580 [f2fs]
do_write_page+0x78/0x150 [f2fs]
f2fs_do_write_node_page+0x25/0xa0 [f2fs]
__write_node_page+0x2bf/0x550 [f2fs]
f2fs_sync_node_pages+0x60e/0x6d0 [f2fs]
? sync_inode_metadata+0x2f/0x40
? f2fs_write_checkpoint+0x28f/0x7d0 [f2fs]
? up_write+0x1e/0x80
f2fs_write_checkpoint+0x2a9/0x7d0 [f2fs]
? mark_held_locks+0x5d/0x80
? _raw_spin_unlock_irq+0x27/0x50
kill_f2fs_super+0x68/0x90 [f2fs]
deactivate_locked_super+0x3d/0x70
deactivate_super+0x40/0x60
cleanup_mnt+0x39/0x70
__cleanup_mnt+0x10/0x20
task_work_run+0x81/0xa0
exit_to_usermode_loop+0x59/0xa7
do_fast_syscall_32+0x1f5/0x22c
entry_SYSENTER_32+0x53/0x86
EIP: 0xb7f95c51
Code: c1 1e f7 ff ff 89 e5 8b 55 08 85 d2 8b 81 64 cd ff ff 74 02 89 02 5d c3 8b 0c 24 c3 8b 1c 24 c3 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76
EAX: 00000000 EBX: 0871ab90 ECX: bfb2cd00 EDX: 00000000
ESI: 00000000 EDI: 0871ab90 EBP: 0871ab90 ESP: bfb2cd7c
DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000246
Modules linked in: f2fs(O) crc32_generic bnep rfcomm bluetooth ecdh_generic snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq pcbc joydev aesni_intel snd_seq_device aes_i586 snd_timer crypto_simd snd cryptd soundcore mac_hid serio_raw video i2c_piix4 parport_pc ppdev lp parport hid_generic psmouse usbhid hid e1000 [last unloaded: f2fs]
---[ end trace d423f83982cfcdc5 ]---

The reason is, different log headers using the same segment, once
one log's next block address is used by another log, it will cause
panic as above.

Main area: 24 segs, 24 secs 24 zones
  - COLD  data: 0, 0, 0
  - WARM  data: 1, 1, 1
  - HOT   data: 20, 20, 20
  - Dir   dnode: 22, 22, 22
  - File   dnode: 22, 22, 22
  - Indir nodes: 21, 21, 21

So this patch adds sanity check to detect such condition to avoid
this issue.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: fix memory leak of percpu counter in fill_super()

In fill_super -> init_percpu_info, we should destroy percpu counter
in error path, otherwise memory allcoated for percpu counter will
leak.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: fix memory leak of write_io in fill_super()

It needs to release memory allocated for sbi->write_io in error path,
otherwise, it will cause memory leak.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: cache NULL when both default_acl and acl are NULL

default_acl and acl of newly created inode will be initiated
as ACL_NOT_CACHED in vfs function inode_init_always() and later
will be updated by calling xxx_init_acl() in specific filesystems.
Howerver, when default_acl and acl are NULL then they keep the value
of ACL_NOT_CACHED, this patch tries to cache NULL for acl/default_acl
in this case.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: fix to flush all dirty inodes recovered in readonly fs

generic/417 reported as blow:

------------[ cut here ]------------
kernel BUG at /home/yuchao/git/devf2fs/inode.c:695!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 21697 Comm: umount Tainted: G W O 4.18.0-rc2+ #39
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
EIP: f2fs_evict_inode+0x556/0x580 [f2fs]
Call Trace:
? _raw_spin_unlock+0x2c/0x50
evict+0xa8/0x170
dispose_list+0x34/0x40
evict_inodes+0x118/0x120
generic_shutdown_super+0x41/0x100
? rcu_read_lock_sched_held+0x97/0xa0
kill_block_super+0x22/0x50
kill_f2fs_super+0x6f/0x80 [f2fs]
deactivate_locked_super+0x3d/0x70
deactivate_super+0x40/0x60
cleanup_mnt+0x39/0x70
__cleanup_mnt+0x10/0x20
task_work_run+0x81/0xa0
exit_to_usermode_loop+0x59/0xa7
do_fast_syscall_32+0x1f5/0x22c
entry_SYSENTER_32+0x53/0x86
EIP: f2fs_evict_inode+0x556/0x580 [f2fs]

It can simply reproduced with scripts:

Enable quota feature during mkfs.

Testcase1:
1. mkfs.f2fs /dev/zram0
2. mount -t f2fs /dev/zram0 /mnt/f2fs
3. xfs_io -f /mnt/f2fs/file -c "pwrite 0 4k" -c "fsync"
4. godown /mnt/f2fs
5. umount /mnt/f2fs
6. mount -t f2fs -o ro /dev/zram0 /mnt/f2fs
7. umount /mnt/f2fs

Testcase2:
1. mkfs.f2fs /dev/zram0
2. mount -t f2fs /dev/zram0 /mnt/f2fs
3. touch /mnt/f2fs/file
4. create process[pid = x] do:
a) open /mnt/f2fs/file;
b) unlink /mnt/f2fs/file
5. godown -f /mnt/f2fs
6. kill process[pid = x]
7. umount /mnt/f2fs
8. mount -t f2fs -o ro /dev/zram0 /mnt/f2fs
9. umount /mnt/f2fs

The reason is: during recovery, i_{c,m}time of inode will be updated, then
the inode can be set dirty w/o being tracked in sbi->inode_list[DIRTY_META]
global list, so later write_checkpoint will not flush such dirty inode into
node page.

Once umount is called, sync_filesystem() in generic_shutdown_super() will
skip syncng dirty inodes due to sb_rdonly check, leaving dirty inodes
there.

To solve this issue, during umount, add remove SB_RDONLY flag in
sb->s_flags, to make sure sync_filesystem() will not be skipped.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: report error if quota off error during umount

Now, we depend on fsck to ensure quota file data is ok,
so we scan whole partition if checkpoint without umount
flag. It's same for quota off error case, which may make
quota file data inconsistent.

generic/019 reports below error:

__quota_error: 1160 callbacks suppressed
Quota error (device zram1): write_blk: dquota write failed
Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota
Quota error (device zram1): write_blk: dquota write failed
Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota
Quota error (device zram1): write_blk: dquota write failed
Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota
Quota error (device zram1): write_blk: dquota write failed
Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota
Quota error (device zram1): write_blk: dquota write failed
Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota
VFS: Busy inodes after unmount of zram1. Self-destruct in 5 seconds.  Have a nice day...

If we failed in below path due to fail to write dquot block, we will miss
to release quota inode, fix it.

- f2fs_put_super
- f2fs_quota_off_umount
  - f2fs_quota_off
   - f2fs_quota_sync   <-- failed
   - dquot_quota_off   <-- missed to call

Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: submit bio after shutdown

Sometimes, some merged IOs could get a chance to be submitted, resulting in
system hang in shutdown test. This issues IOs all the time after shutdown.

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: avoid wrong decrypted data from disk

1. Create a file in an encrypted directory
2. Do GC & drop caches
3. Read stale data before its bio for metapage was not issued yet

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Revert "f2fs: use printk_ratelimited for f2fs_msg"

Don't limit printing log, so that we will not miss any key messages.

This reverts commit a36c106dffb616250117efb1cab271c19a8f94ff.

In addition, we use printk_ratelimited to avoid too many log prints.
- error injection
- discard submission failure

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: fix unnecessary periodic wakeup of discard thread when dev is busy

When dev is busy, discard thread wake up timeout can be aligned with the
exact time that it needs to wait for dev to come out of busy. This helps
to avoid unnecessary periodic wakeups and thus save some power.

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: fix to avoid NULL pointer dereference on se->discard_map

https://bugzilla.kernel.org/show_bug.cgi?id=200951

These is a NULL pointer dereference issue reported in bugzilla:

Hi,
in the setup there is a SATA SSD connected to a SATA-to-USB bridge.

The disc is "Samsung SSD 850 PRO 256G" which supports TRIM.
There are four partitions:
sda1: FAT  /boot
sda2: F2FS /
sda3: F2FS /home
sda4: F2FS

The bridge is ASMT1153e which uses the "uas" driver.
There is no TRIM pass-through, so, when mounting it reports:
mounting with "discard" option, but the device does not support discard

The USB host is USB3.0 and UASP capable. It is the one on RK3399.

Given this everything works fine, except there is no TRIM support.

In order to enable TRIM a new UDEV rule is added [1]:
/etc/udev/rules.d/10-sata-bridge-trim.rules:
ACTION=="add|change", ATTRS{idVendor}=="174c", ATTRS{idProduct}=="55aa", SUBSYSTEM=="scsi_disk", ATTR{provisioning_mode}="unmap"
After reboot any F2FS write hangs forever and dmesg reports:
Unable to handle kernel NULL pointer dereference

Also tested on a x86_64 system: works fine even with TRIM enabled.
same disc
same bridge
different usb host controller
different cpu architecture
not root filesystem

Regards,
  Vicenç.

[1] Post #5 in https://bbs.archlinux.org/viewtopic.php?id=236280

Unable to handle kernel NULL pointer dereference at virtual address 000000000000003e
Mem abort info:
   ESR = 0x96000004
   Exception class = DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
Data abort info:
   ISV = 0, ISS = 0x00000004
   CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000626e3122
[000000000000003e] pgd=0000000000000000
Internal error: Oops: 96000004 [#1] SMP
Modules linked in: overlay snd_soc_hdmi_codec rc_cec dw_hdmi_i2s_audio dw_hdmi_cec snd_soc_simple_card snd_soc_simple_card_utils snd_soc_rockchip_i2s rockchip_rga snd_soc_rockchip_pcm rockchipdrm videobuf2_dma_sg v4l2_mem2mem rtc_rk808 videobuf2_memops analogix_dp videobuf2_v4l2 videobuf2_common dw_hdmi dw_wdt cec rc_core videodev drm_kms_helper media drm rockchip_thermal rockchip_saradc realtek drm_panel_orientation_quirks syscopyarea sysfillrect sysimgblt fb_sys_fops dwmac_rk stmmac_platform stmmac pwm_bl squashfs loop crypto_user gpio_keys hid_kensington
CPU: 5 PID: 957 Comm: nvim Not tainted 4.19.0-rc1-1-ARCH #1
Hardware name: Sapphire-RK3399 Board (DT)
pstate: 00000005 (nzcv daif -PAN -UAO)
pc : update_sit_entry+0x304/0x4b0
lr : update_sit_entry+0x108/0x4b0
sp : ffff00000ca13bd0
x29: ffff00000ca13bd0 x28: 000000000000003e
x27: 0000000000000020 x26: 0000000000080000
x25: 0000000000000048 x24: ffff8000ebb85cf8
x23: 0000000000000253 x22: 00000000ffffffff
x21: 00000000000535f2 x20: 00000000ffffffdf
x19: ffff8000eb9e6800 x18: ffff8000eb9e6be8
x17: 0000000007ce6926 x16: 000000001c83ffa8
x15: 0000000000000000 x14: ffff8000f602df90
x13: 0000000000000006 x12: 0000000000000040
x11: 0000000000000228 x10: 0000000000000000
x9 : 0000000000000000 x8 : 0000000000000000
x7 : 00000000000535f2 x6 : ffff8000ebff3440
x5 : ffff8000ebff3440 x4 : ffff8000ebe3a6c8
x3 : 00000000ffffffff x2 : 0000000000000020
x1 : 0000000000000000 x0 : ffff8000eb9e5800
Process nvim (pid: 957, stack limit = 0x0000000063a78320)
Call trace:
  update_sit_entry+0x304/0x4b0
  f2fs_invalidate_blocks+0x98/0x140
  truncate_node+0x90/0x400
  f2fs_remove_inode_page+0xe8/0x340
  f2fs_evict_inode+0x2b0/0x408
  evict+0xe0/0x1e0
  iput+0x160/0x260
  do_unlinkat+0x214/0x298
  __arm64_sys_unlinkat+0x3c/0x68
  el0_svc_handler+0x94/0x118
  el0_svc+0x8/0xc
Code: f9400800 b9488400 36080140 f9400f01 (387c4820)
---[ end trace a0f21a307118c477 ]---

The reason is it is possible to enable discard flag on block queue via
UDEV, but during mount, f2fs will initialize se->discard_map only if
this flag is set, once the flag is set after mount, f2fs may dereference
NULL pointer on se->discard_map.

So this patch does below changes to fix this issue:
- initialize and update se->discard_map all the time.
- don't clear DISCARD option if device has no QUEUE_FLAG_DISCARD flag
during mount.
- don't issue small discard on zoned block device.
- introduce some functions to enhance the readability.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Tested-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs: add additional sanity check in f2fs_acl_from_disk()

Add additinal sanity check for irregular case(e.g. corruption).
If size of extended attribution is smaller than size of acl header,
then return -EINVAL.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Merge tag 'gpio-v4.19-2' of git://git./linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
"Some GPIO fixes. The ACPI stuff is probably the most annoying for
  users that get fixed this time.

   - Atomic contexts, cansleep* calls and such fastpath/slopwpath
     things.

   - Defer ACPI event handler registration to late_initcall() so IRQs do
     not fire in our face before other drivers have a chance to register
     handlers.

   - Race condition if a consumer requests a GPIO after
     gpiochip_add_data_with_key() but before of_gpiochip_add()

   - Probe errorpath in the dwapb driver"

* tag 'gpio-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: Fix crash due to registration race
  gpio: dwapb: Fix error handling in dwapb_gpio_probe()
  gpiolib-acpi: Register GpioInt ACPI event handlers from a late_initcall
  gpiolib: acpi: Switch to cansleep version of GPIO library call
  gpio: adp5588: Fix sleep-in-atomic-context bug

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"A set of very minor fixes and a couple of reverts to fix a major
  problem (the attempt to change the busy count causes a hang when
  attempting to change the drive cache type)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: aacraid: fix a signedness bug
  Revert "scsi: core: avoid host-wide host_busy counter for scsi_mq"
  Revert "scsi: core: fix scsi_host_queue_ready"
  scsi: libata: Add missing newline at end of file
  scsi: target: iscsi: cxgbit: use pr_debug() instead of pr_info()
  scsi: hpsa: limit transfer length to 1MB, not 512kB
  scsi: lpfc: Correct MDS diag and nvmet configuration
  scsi: lpfc: Default fdmi_on to on
  scsi: csiostor: fix incorrect port capabilities
  scsi: csiostor: add a check for NULL pointer after kmalloc()
  scsi: documentation: add scsi_mod.use_blk_mq to scsi-parameters
  scsi: core: Update SCSI_MQ_DEFAULT help text to match default

Merge tag 'nds32-for-linus-4.19-tag1' of git://git./linux/kernel/git/greentime/linux

Pull nds32 updates from Greentime Hu:
"Contained in here are the bug fixes, building error fixes and ftrace
  support for nds32"

* tag 'nds32-for-linus-4.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux:
  nds32: linker script: GCOV kernel may refers data in __exit
  nds32: fix build error because of wrong semicolon
  nds32: Fix a kernel panic issue because of wrong frame pointer access.
  nds32: Only print one page of stack when die to prevent printing too much information.
  nds32: Add macro definition for offset of lp register on stack
  nds32: Remove the deprecated ABI implementation
  nds32/stack: Get real return address by using ftrace_graph_ret_addr
  nds32/ftrace: Support dynamic function graph tracer
  nds32/ftrace: Support dynamic function tracer
  nds32/ftrace: Add RECORD_MCOUNT support
  nds32/ftrace: Support static function graph tracer
  nds32/ftrace: Support static function tracer
  nds32: Extract the checking and getting pointer to a macro
  nds32: Clean up the coding style
  nds32: Fix get_user/put_user macro expand pointer problem
  nds32: Fix empty call trace
  nds32: add NULL entry to the end of_device_id array
  nds32: fix logic for module

nds32: linker script: GCOV kernel may refers data in __exit

This patch is used to fix nds32 allmodconfig/allyesconfig build error
because GCOV kernel embeds counters in the kernel for each line
and a part of that embed in __exit text. So we need to keep the
EXIT_TEXT and EXIT_DATA if CONFIG_GCOV_KERNEL=y.

Link: https://lkml.org/lkml/2018/9/1/125
Signed-off-by: Greentime Hu <greentime@andestech.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
"17 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  nilfs2: convert to SPDX license tags
  drivers/dax/device.c: convert variable to vm_fault_t type
  lib/Kconfig.debug: fix three typos in help text
  checkpatch: add __ro_after_init to known $Attribute
  mm: fix BUG_ON() in vmf_insert_pfn_pud() from VM_MIXEDMAP removal
  uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name
  memory_hotplug: fix kernel_panic on offline page processing
  checkpatch: add optional static const to blank line declarations test
  ipc/shm: properly return EIDRM in shm_lock()
  mm/hugetlb: filter out hugetlb pages if HUGEPAGE migration is not supported.
  mm/util.c: improve kvfree() kerneldoc
  tools/vm/page-types.c: fix "defined but not used" warning
  tools/vm/slabinfo.c: fix sign-compare warning
  kmemleak: always register debugfs file
  mm: respect arch_dup_mmap() return value
  mm, oom: fix missing tlb_finish_mmu() in __oom_reap_task_mm().
  mm: memcontrol: print proper OOM header when no eligible victim left

nilfs2: convert to SPDX license tags

Remove the verbose license text from NILFS2 files and replace them with
SPDX tags. This does not change the license of any of the code.

Link: http://lkml.kernel.org/r/1535624528-5982-1-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/dax/device.c: convert variable to vm_fault_t type

As part of 226ab561075f ("device-dax: Convert to vmf_insert_mixed and
vm_fault_t") in 4.19-rc1, 'rc' was not converted to vm_fault_t. Now
converted.

Link: http://lkml.kernel.org/r/20180830153813.GA26059@jordon-HP-15-Notebook-PC
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/Kconfig.debug: fix three typos in help text

Fix three typos in CONFIG_WARN_ALL_UNSEEDED_RANDOM help text.

Link: http://lkml.kernel.org/r/20180830194505.4778-1-thibaut@sautereau.fr
Signed-off-by: Thibaut Sautereau <thibaut@sautereau.fr>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add __ro_after_init to known $Attribute

__ro_after_init is a specific __attribute__ that checkpatch does currently
not understand.

Add it to the known $Attribute types so that code that uses variables
declared with __ro_after_init are not thought to be a modifier type.

This appears as a defect in checkpatch output of code like:

static bool trust_cpu __ro_after_init = IS_ENABLED(CONFIG_RANDOM_TRUST_CPU);
[...]
if (trust_cpu && arch_init) {

where checkpatch reports:

ERROR: space prohibited after that '&&' (ctx:WxW)
if (trust_cpu && arch_init) {

Link: http://lkml.kernel.org/r/0fa8a2cb83ade4c525e18261ecf6cfede3015983.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix BUG_ON() in vmf_insert_pfn_pud() from VM_MIXEDMAP removal

It looks like I missed the PUD path when doing VM_MIXEDMAP removal.
This can be triggered by:
1. Boot with memmap=4G!8G
2. build ndctl with destructive flag on
3. make TESTS=device-dax check

[ +0.000675] kernel BUG at mm/huge_memory.c:824!

Applying the same change that was applied to vmf_insert_pfn_pmd() in the
original patch.

Link: http://lkml.kernel.org/r/153565957352.35524.1005746906902065126.stgit@djiang5-desk3.ch.intel.com
Fixes: e1fb4a08649 ("dax: remove VM_MIXEDMAP for fsdax and device dax")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Tested-by: Vishal Verma <vishal.l.verma@intel.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name

Since this header is in "include/uapi/linux/", apparently people want to
use it in userspace programs -- even in C++ ones. However, the header
uses a C++ reserved keyword ("private"), so change that to "dh_private"
instead to allow the header file to be used in C++ userspace.

Fixes https://bugzilla.kernel.org/show_bug.cgi?id=191051
Link: http://lkml.kernel.org/r/0db6c314-1ef4-9bfa-1baa-7214dd2ee061@infradead.org
Fixes: ddbb41148724 ("KEYS: Add KEYCTL_DH_COMPUTE command")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memory_hotplug: fix kernel_panic on offline page processing

Within show_valid_zones() the function test_pages_in_a_zone() should be
called for online memory blocks only.

Otherwise it might lead to the VM_BUG_ON due to uninitialized struct
pages (when CONFIG_DEBUG_VM_PGFLAGS kernel option is set):

page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
------------[ cut here ]------------
Call Trace:
([<000000000038f91e>] test_pages_in_a_zone+0xe6/0x168)
  [<0000000000923472>] show_valid_zones+0x5a/0x1a8
  [<0000000000900284>] dev_attr_show+0x3c/0x78
  [<000000000046f6f0>] sysfs_kf_seq_show+0xd0/0x150
  [<00000000003ef662>] seq_read+0x212/0x4b8
  [<00000000003bf202>] __vfs_read+0x3a/0x178
  [<00000000003bf3ca>] vfs_read+0x8a/0x148
  [<00000000003bfa3a>] ksys_read+0x62/0xb8
  [<0000000000bc2220>] system_call+0xdc/0x2d8

That VM_BUG_ON was triggered by the page poisoning introduced in
mm/sparse.c with the git commit d0dc12e86b31 ("mm/memory_hotplug:
optimize memory hotplug").

With the same commit the new 'nid' field has been added to the struct
memory_block in order to store and later on derive the node id for
offline pages (instead of accessing struct page which might be
uninitialized).  But one reference to nid in show_valid_zones() function
has been overlooked.  Fixed with current commit.  Also, nr_pages will
not be used any more after test_pages_in_a_zone() call, do not update
it.

Link: http://lkml.kernel.org/r/20180828090539.41491-1-zaslonko@linux.ibm.com
Fixes: d0dc12e86b31 ("mm/memory_hotplug: optimize memory hotplug")
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: <stable@vger.kernel.org> [4.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add optional static const to blank line declarations test

Using a static const struct definition as part of a series of
declarations produces a false positive "Missing a blank line after
declarations" for code like:

  WARNING: Missing a blank line after declarations
  #710: FILE: drivers/gpu/drm/tidss/tidss_scale_coefs.c:137:
  +       int inc;
  +       static const struct {

So fix it.

Link: http://lkml.kernel.org/r/5905126e70b0ed1781e49265fd5c49c5090d0223.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Jyri Sarha <jsarha@ti.com>
Cc: "Valkeinen, Tomi" <tomi.valkeinen@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc/shm: properly return EIDRM in shm_lock()

When getting rid of the general ipc_lock(), this was missed furthermore,
making the comment around the ipc object validity check bogus. Under
EIDRM conditions, callers will in turn not see the error and continue
with the operation.

Link: http://lkml.kernel.org/r/20180824030920.GD3677@linux-r8p5
Link: http://lkml.kernel.org/r/20180823024051.GC13343@shao2-debian
Fixes: 82061c57ce9 ("ipc: drop ipc_lock()")
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reported-by: kernel test robot <rong.a.chen@intel.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: filter out hugetlb pages if HUGEPAGE migration is not supported.

When scanning for movable pages, filter out Hugetlb pages if hugepage
migration is not supported. Without this we hit infinte loop in
__offline_pages() where we do

pfn = scan_movable_pages(start_pfn, end_pfn);
if (pfn) { /* We have movable pages */
ret = do_migrate_range(pfn, end_pfn);
goto repeat;
}

Fix this by checking hugepage_migration_supported both in
has_unmovable_pages which is the primary backoff mechanism for page
offlining and for consistency reasons also into scan_movable_pages
because it doesn't make any sense to return a pfn to non-migrateable
huge page.

This issue was revealed by, but not caused by 72b39cfc4d75 ("mm,
memory_hotplug: do not fail offlining too early").

Link: http://lkml.kernel.org/r/20180824063314.21981-1-aneesh.kumar@linux.ibm.com
Fixes: 72b39cfc4d75 ("mm, memory_hotplug: do not fail offlining too early")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reported-by: Haren Myneni <haren@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/util.c: improve kvfree() kerneldoc

Scooped from an email from Matthew.

Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tools/vm/page-types.c: fix "defined but not used" warning

debugfs_known_mountpoints[] is not used any more, so let's remove it.

Link: http://lkml.kernel.org/r/1535102651-19418-1-git-send-email-n-horiguchi@ah.jp.nec.com
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tools/vm/slabinfo.c: fix sign-compare warning

Currently we get the following compiler warning:

    slabinfo.c:854:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
       if (s->object_size < min_objsize)
                          ^

due to the mismatch of signed/unsigned comparison.  ->object_size and
->slab_size are never expected to be negative, so let's define them as
unsigned int.

[n-horiguchi@ah.jp.nec.com: convert everything - none of these can be negative]
Link: http://lkml.kernel.org/r/20180826234947.GA9787@hori1.linux.bs1.fc.nec.co.jp
Link: http://lkml.kernel.org/r/1535103134-20239-1-git-send-email-n-horiguchi@ah.jp.nec.com
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kmemleak: always register debugfs file

If kmemleak built in to the kernel, but is disabled by default, the
debugfs file is never registered.  Because of this, it is not possible
to find out if the kernel is built with kmemleak support by checking for
the presence of this file.  To allow this, always register the file.

After this patch, if the file doesn't exist, kmemleak is not available
in the kernel.  If writing "scan" or any other value than "clear" to
this file results in EBUSY, then kmemleak is available but is disabled
by default and can be activated via the kernel command line.

Catalin: "that's also consistent with a late disabling of kmemleak when
the debugfs entry sticks around."

Link: http://lkml.kernel.org/r/20180824131220.19176-1-vincent.whitchurch@axis.com
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: respect arch_dup_mmap() return value

Commit d70f2a14b72a ("include/linux/sched/mm.h: uninline mmdrop_async(),
etc") ignored the return value of arch_dup_mmap(). As a result, on x86,
a failure to duplicate the LDT (e.g. due to memory allocation error)
would leave the duplicated memory mapping in an inconsistent state.

Fix by using the return value, as it was before the change.

Link: http://lkml.kernel.org/r/20180823051229.211856-1-namit@vmware.com
Fixes: d70f2a14b72a4 ("include/linux/sched/mm.h: uninline mmdrop_async(), etc")
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, oom: fix missing tlb_finish_mmu() in __oom_reap_task_mm().

Commit 93065ac753e4 ("mm, oom: distinguish blockable mode for mmu
notifiers") has added an ability to skip over vmas with blockable mmu
notifiers. This however didn't call tlb_finish_mmu as it should.

As a result inc_tlb_flush_pending has been called without its pairing
dec_tlb_flush_pending and all callers mm_tlb_flush_pending would flush
even though this is not really needed. This alone is not harmful and it
seems there shouldn't be any such callers for oom victims at all but
there is no real reason to skip tlb_finish_mmu on early skip either so
call it.

[mhocko@suse.com: new changelog]
Link: http://lkml.kernel.org/r/b752d1d5-81ad-7a35-2394-7870641be51c@i-love.sakura.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcontrol: print proper OOM header when no eligible victim left

When the memcg OOM killer runs out of killable tasks, it currently
prints a WARN with no further OOM context.  This has caused some user
confusion.

Warnings indicate a kernel problem.  In a reported case, however, the
situation was triggered by a nonsensical memcg configuration (hard limit
set to 0).  But without any VM context this wasn't obvious from the
report, and it took some back and forth on the mailing list to identify
what is actually a trivial issue.

Handle this OOM condition like we handle it in the global OOM killer:
dump the full OOM context and tell the user we ran out of tasks.

This way the user can identify misconfigurations easily by themselves
and rectify the problem - without having to go through the hassle of
running into an obscure but unsettling warning, finding the appropriate
kernel mailing list and waiting for a kernel developer to remote-analyze
that the memcg configuration caused this.

If users cannot make sense of why the OOM killer was triggered or why it
failed, they will still report it to the mailing list, we know that from
experience.  So in case there is an actual kernel bug causing this,
kernel developers will very likely hear about it.

Link: http://lkml.kernel.org/r/20180821160406.22578-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) Must perform TXQ teardown before unregistering interfaces in
    mac80211, from Toke Høiland-Jørgensen.

2) Don't allow creating mac80211_hwsim with less than one channel, from
    Johannes Berg.

3) Division by zero in cfg80211, fix from Johannes Berg.

4) Fix endian issue in tipc, from Haiqing Bai.

5) BPF sockmap use-after-free fixes from Daniel Borkmann.

6) Spectre-v1 in mac80211_hwsim, from Jinbum Park.

7) Missing rhashtable_walk_exit() in tipc, from Cong Wang.

8) Revert kvzalloc() conversion of AF_PACKET, it breaks mmap() when
    kvzalloc() tries to use kmalloc() pages. From Eric Dumazet.

9) Fix deadlock in hv_netvsc, from Dexuan Cui.

10) Do not restart timewait timer on RST, from Florian Westphal.

11) Fix double lwstate refcount grab in ipv6, from Alexey Kodanev.

12) Unsolicit report count handling is off-by-one, fix from Hangbin Liu.

13) Sleep-in-atomic in cadence driver, from Jia-Ju Bai.

14) Respect ttl-inherit in ip6 tunnel driver, from Hangbin Liu.

15) Use-after-free in act_ife, fix from Cong Wang.

16) Missing hold to meta module in act_ife, from Vlad Buslov.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (91 commits)
  net: phy: sfp: Handle unimplemented hwmon limits and alarms
  net: sched: action_ife: take reference to meta module
  act_ife: fix a potential use-after-free
  net/mlx5: Fix SQ offset in QPs with small RQ
  tipc: correct spelling errors for tipc_topsrv_queue_evt() comments
  tipc: correct spelling errors for struct tipc_bc_base's comment
  bnxt_en: Do not adjust max_cp_rings by the ones used by RDMA.
  bnxt_en: Clean up unused functions.
  bnxt_en: Fix firmware signaled resource change logic in open.
  sctp: not traverse asoc trans list if non-ipv6 trans exists for ipv6_flowlabel
  sctp: fix invalid reference to the index variable of the iterator
  net/ibm/emac: wrong emac_calc_base call was used by typo
  net: sched: null actions array pointer before releasing action
  vhost: fix VHOST_GET_BACKEND_FEATURES ioctl request definition
  r8169: add support for NCube 8168 network card
  ip6_tunnel: respect ttl inherit for ip6tnl
  mac80211: shorten the IBSS debug messages
  mac80211: don't Tx a deauth frame if the AP forbade Tx
  mac80211: Fix station bandwidth setting after channel switch
  mac80211: fix a race between restart and CSA flows
  ...

net: phy: sfp: Handle unimplemented hwmon limits and alarms

Not all SFPs implement the registers containing sensor limits and
alarms. Luckily, there is a bit indicating if they are implemented or
not. Add checking for this bit, when deciding if the hwmon attributes
should be visible.

Fixes: 1323061a018a ("net: phy: sfp: Add HWMON support for module sensors")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: action_ife: take reference to meta module

Recent refactoring of add_metainfo() caused use_all_metadata() to add
metainfo to ife action metalist without taking reference to module. This
causes warning in module_put called from ife action cleanup function.

Implement add_metainfo_and_get_ops() function that returns with reference
to module taken if metainfo was added successfully, and call it from
use_all_metadata(), instead of calling __add_metainfo() directly.

Example warning:

[  646.344393] WARNING: CPU: 1 PID: 2278 at kernel/module.c:1139 module_put+0x1cb/0x230
[  646.352437] Modules linked in: act_meta_skbtcindex act_meta_mark act_meta_skbprio act_ife ife veth nfsv3 nfs fscache xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c tun ebtable_filter ebtables ip6table_filter ip6_tables bridge stp llc mlx5_ib ib_uverbs ib_core intel_rapl sb_edac x86_pkg_temp_thermal mlx5_core coretemp kvm_intel kvm nfsd igb irqbypass crct10dif_pclmul devlink crc32_pclmul mei_me joydev ses crc32c_intel enclosure auth_rpcgss i2c_algo_bit ioatdma ptp mei pps_core ghash_clmulni_intel iTCO_wdt iTCO_vendor_support pcspkr dca ipmi_ssif lpc_ich target_core_mod i2c_i801 ipmi_si ipmi_devintf pcc_cpufreq wmi ipmi_msghandler nfs_acl lockd acpi_pad acpi_power_meter grace sunrpc mpt3sas raid_class scsi_transport_sas
[  646.425631] CPU: 1 PID: 2278 Comm: tc Not tainted 4.19.0-rc1+ #799
[  646.432187] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[  646.440595] RIP: 0010:module_put+0x1cb/0x230
[  646.445238] Code: f3 66 94 02 e8 26 ff fa ff 85 c0 74 11 0f b6 1d 51 30 94 02 80 fb 01 77 60 83 e3 01 74 13 65 ff 0d 3a 83 db 73 e9 2b ff ff ff <0f> 0b e9 00 ff ff ff e8 59 01 fb ff 85 c0 75 e4 48 c7 c2 20 62 6b
[  646.464997] RSP: 0018:ffff880354d37068 EFLAGS: 00010286
[  646.470599] RAX: 0000000000000000 RBX: ffffffffc0a52518 RCX: ffffffff8c2668db
[  646.478118] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffffffffc0a52518
[  646.485641] RBP: ffffffffc0a52180 R08: fffffbfff814a4a4 R09: fffffbfff814a4a3
[  646.493164] R10: ffffffffc0a5251b R11: fffffbfff814a4a4 R12: 1ffff1006a9a6e0d
[  646.500687] R13: 00000000ffffffff R14: ffff880362bab890 R15: dead000000000100
[  646.508213] FS:  00007f4164c99800(0000) GS:ffff88036fe40000(0000) knlGS:0000000000000000
[  646.516961] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  646.523080] CR2: 00007f41638b8420 CR3: 0000000351df0004 CR4: 00000000001606e0
[  646.530595] Call Trace:
[  646.533408]  ? find_symbol_in_section+0x260/0x260
[  646.538509]  tcf_ife_cleanup+0x11b/0x200 [act_ife]
[  646.543695]  tcf_action_cleanup+0x29/0xa0
[  646.548078]  __tcf_action_put+0x5a/0xb0
[  646.552289]  ? nla_put+0x65/0xe0
[  646.555889]  __tcf_idr_release+0x48/0x60
[  646.560187]  tcf_generic_walker+0x448/0x6b0
[  646.564764]  ? tcf_action_dump_1+0x450/0x450
[  646.569411]  ? __lock_is_held+0x84/0x110
[  646.573720]  ? tcf_ife_walker+0x10c/0x20f [act_ife]
[  646.578982]  tca_action_gd+0x972/0xc40
[  646.583129]  ? tca_get_fill.constprop.17+0x250/0x250
[  646.588471]  ? mark_lock+0xcf/0x980
[  646.592324]  ? check_chain_key+0x140/0x1f0
[  646.596832]  ? debug_show_all_locks+0x240/0x240
[  646.601839]  ? memset+0x1f/0x40
[  646.605350]  ? nla_parse+0xca/0x1a0
[  646.609217]  tc_ctl_action+0x215/0x230
[  646.613339]  ? tcf_action_add+0x220/0x220
[  646.617748]  rtnetlink_rcv_msg+0x56a/0x6d0
[  646.622227]  ? rtnl_fdb_del+0x3f0/0x3f0
[  646.626466]  netlink_rcv_skb+0x18d/0x200
[  646.630752]  ? rtnl_fdb_del+0x3f0/0x3f0
[  646.634959]  ? netlink_ack+0x500/0x500
[  646.639106]  netlink_unicast+0x2d0/0x370
[  646.643409]  ? netlink_attachskb+0x340/0x340
[  646.648050]  ? _copy_from_iter_full+0xe9/0x3e0
[  646.652870]  ? import_iovec+0x11e/0x1c0
[  646.657083]  netlink_sendmsg+0x3b9/0x6a0
[  646.661388]  ? netlink_unicast+0x370/0x370
[  646.665877]  ? netlink_unicast+0x370/0x370
[  646.670351]  sock_sendmsg+0x6b/0x80
[  646.674212]  ___sys_sendmsg+0x4a1/0x520
[  646.678443]  ? copy_msghdr_from_user+0x210/0x210
[  646.683463]  ? lock_downgrade+0x320/0x320
[  646.687849]  ? debug_show_all_locks+0x240/0x240
[  646.692760]  ? do_raw_spin_unlock+0xa2/0x130
[  646.697418]  ? _raw_spin_unlock+0x24/0x30
[  646.701798]  ? __handle_mm_fault+0x1819/0x1c10
[  646.706619]  ? __pmd_alloc+0x320/0x320
[  646.710738]  ? debug_show_all_locks+0x240/0x240
[  646.715649]  ? restore_nameidata+0x7b/0xa0
[  646.720117]  ? check_chain_key+0x140/0x1f0
[  646.724590]  ? check_chain_key+0x140/0x1f0
[  646.729070]  ? __fget_light+0xbc/0xd0
[  646.733121]  ? __sys_sendmsg+0xd7/0x150
[  646.737329]  __sys_sendmsg+0xd7/0x150
[  646.741359]  ? __ia32_sys_shutdown+0x30/0x30
[  646.746003]  ? up_read+0x53/0x90
[  646.749601]  ? __do_page_fault+0x484/0x780
[  646.754105]  ? do_syscall_64+0x1e/0x2c0
[  646.758320]  do_syscall_64+0x72/0x2c0
[  646.762353]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  646.767776] RIP: 0033:0x7f4163872150
[  646.771713] Code: 8b 15 3c 7d 2b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb cd 66 0f 1f 44 00 00 83 3d b9 d5 2b 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be cd 00 00 48 89 04 24
[  646.791474] RSP: 002b:00007ffdef7d6b58 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[  646.799721] RAX: ffffffffffffffda RBX: 0000000000000024 RCX: 00007f4163872150
[  646.807240] RDX: 0000000000000000 RSI: 00007ffdef7d6bd0 RDI: 0000000000000003
[  646.814760] RBP: 000000005b8b9482 R08: 0000000000000001 R09: 0000000000000000
[  646.822286] R10: 00000000000005e7 R11: 0000000000000246 R12: 00007ffdef7dad20
[  646.829807] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000679bc0
[  646.837360] irq event stamp: 6083
[  646.841043] hardirqs last  enabled at (6081): [<ffffffff8c220a7d>] __call_rcu+0x17d/0x500
[  646.849882] hardirqs last disabled at (6083): [<ffffffff8c004f06>] trace_hardirqs_off_thunk+0x1a/0x1c
[  646.859775] softirqs last  enabled at (5968): [<ffffffff8d4004a1>] __do_softirq+0x4a1/0x6ee
[  646.868784] softirqs last disabled at (6082): [<ffffffffc0a78759>] tcf_ife_cleanup+0x39/0x200 [act_ife]
[  646.878845] ---[ end trace b1b8c12ffe51e657 ]---

Fixes: 5ffe57da29b3 ("act_ife: fix a potential deadlock")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

act_ife: fix a potential use-after-free

Immediately after module_put(), user could delete this
module, so e->ops could be already freed before we call
e->ops->release().

Fix this by moving module_put() after ops->release().

Fixes: ef6980b6becb ("introduce IFE action")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5: Fix SQ offset in QPs with small RQ

Correct the formula for calculating the RQ page remainder,
which should be in byte granularity. The result will be
non-zero only for RQs smaller than PAGE_SIZE, as an RQ size
is a power of 2.

Divide this by the SQ stride (MLX5_SEND_WQE_BB) to get the
SQ offset in strides granularity.

Fixes: d7037ad73daa ("net/mlx5: Fix QP fragmented buffer allocation")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nds32: fix build error because of wrong semicolon

It shall be removed in the define usage. We shall not put a semicolon there.

/kisskb/src/arch/nds32/include/asm/elf.h:126:29: error: expected '}' before ';' token
#define ELF_DATA ELFDATA2LSB;
                             ^
/kisskb/src/fs/proc/kcore.c:318:17: note: in expansion of macro 'ELF_DATA'
     [EI_DATA] = ELF_DATA,
                 ^~~~~~~~
/kisskb/src/fs/proc/kcore.c:312:15: note: to match this '{'
    .e_ident = {
               ^
/kisskb/src/scripts/Makefile.build:307: recipe for target 'fs/proc/kcore.o' failed

Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32: Only print one page of stack when die to prevent printing too much information.

It may print too much information sometimes if the stack is wrong or
too big. This patch can limit the debug information in a page of stack.

Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32: Add macro definition for offset of lp register on stack

Use macro to replace the magic number.

Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32: Remove the deprecated ABI implementation

We are not using NDS32 ABI 2 for now, just remove the preprocessor
directives __NDS32_ABI_2.

Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32/stack: Get real return address by using ftrace_graph_ret_addr

Function graph tracer has modified the return address to
'return_to_handler' on stack, and provide the 'ftrace_graph_ret_addr' to
get the real return address.

Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32/ftrace: Support dynamic function graph tracer

This patch contains the implementation of dynamic function graph tracer.

Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32/ftrace: Support dynamic function tracer

This patch contains the implementation of dynamic function tracer.
The mcount call is composed of three instructions, so there are three
nop for enough placeholder.

Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32/ftrace: Add RECORD_MCOUNT support

Recognize NDS32 object files in recordmcount.pl.

Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32/ftrace: Support static function graph tracer

This patch contains implementation of static function graph tracer.

Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32/ftrace: Support static function tracer

This patch support the static function tracer. On nds32 ABI, we need to
always push return address to stack for __builtin_return_address can
work correctly, otherwise, it will get the wrong value of $lp at leaf
function.

Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32: Extract the checking and getting pointer to a macro

Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32: Clean up the coding style

1. Adjust indentation.
2. Unify argument name of each macro.
3. Add space after comma in parameters list.
4. Add space after 'if' keyword.
5. Replace space by tab.
6. Change asm volatile to __asm__ __volatile__

Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32: Fix get_user/put_user macro expand pointer problem

The pointer argument of macro need to be taken out once first, and then
use the new pointer in the macro body.

In kernel/trace/trace.c, get_user(ch, ubuf++) causes the unexpected
increment after expand the macro.

Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32: Fix empty call trace

The compiler predefined macro 'NDS32_ABI_2' had been removed, it should
use the '__NDS32_ABI_2' here.

Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32: add NULL entry to the end of_device_id array

Make sure of_device_id tables are NULL terminated.
Found by coccinelle spatch "misc/of_table.cocci"

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>

nds32: fix logic for module

This bug is report by Dan Carpenter. We shall use ~loc_mask instead of
!loc_mask because we need to and(&) the bits of ~loc_mask.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: c9a4a8da6baa ("nds32: Loadable modules")
Signed-off-by: Greentime Hu <greentime@andestech.com>

Merge tag 'mac80211-for-davem-2018-09-03' of git://git./linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Here are quite a large number of fixes, notably:
* various A-MSDU building fixes (currently only affects mt76)
* syzkaller & spectre fixes in hwsim
* TXQ vs. teardown fix that was causing crashes
* embed WMM info in reg rule, bad code here had been causing crashes
* one compilation issue with fix from Arnd (rfkill-gpio includes)
* fixes for a race and bad data during/after channel switch
* nl80211: a validation fix, attribute type & unit fixes
along with other small fixes.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: correct spelling errors for tipc_topsrv_queue_evt() comments

tipc_conn_queue_evt -> tipc_topsrv_queue_evt
tipc_send_work -> tipc_conn_send_work
tipc_send_to_sock -> tipc_conn_send_to_sock

Signed-off-by: Zhenbo Gao <zhenbo.gao@windriver.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: correct spelling errors for struct tipc_bc_base's comment

Trivial fix for two spelling mistakes.

Signed-off-by: Zhenbo Gao <zhenbo.gao@windriver.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'bnxt_en-Bug-fixes'

Michael Chan says:

====================
bnxt_en: Bug fixes.

This short series fixes resource related logic in the driver, mostly
affecting the RDMA driver under corner cases.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Do not adjust max_cp_rings by the ones used by RDMA.

Currently, the driver adjusts the bp->hw_resc.max_cp_rings by the number
of MSIX vectors used by RDMA. There is one code path in open that needs
to check the true max_cp_rings including any used by RDMA. This code
is now checking for the reduced max_cp_rings which will fail when the
number of cp rings is very small.

To fix this in a clean way, we don't adjust max_cp_rings anymore.
Instead, we add a helper bnxt_get_max_func_cp_rings_for_en() to get the
reduced max_cp_rings when appropriate.

Fixes: ec86f14ea506 ("bnxt_en: Add ULP calls to stop and restart IRQs.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Clean up unused functions.

Remove unused bnxt_subtract_ulp_resources(). Change
bnxt_get_max_func_irqs() to static since it is only locally used.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Fix firmware signaled resource change logic in open.

When the driver detects that resources have changed during open, it
should reset the rx and tx rings to 0.  This will properly setup the
init sequence to initialize the default rings again.  We also need
to signal the RDMA driver to stop and clear its interrupts.  We then
call the RoCE driver to restart if a new set of default rings is
successfully reserved.

Fixes: 25e1acd6b92b ("bnxt_en: Notify firmware about IF state changes.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'sctp-two-fixes-for-spp_ipv6_flowlabel-and-spp_dscp-sockopts'

Xin Long says:

====================
sctp: two fixes for spp_ipv6_flowlabel and spp_dscp sockopts

This patchset fixes two problems in sctp_apply_peer_addr_params()
when setting spp_ipv6_flowlabel or spp_dscp.
====================

Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: not traverse asoc trans list if non-ipv6 trans exists for ipv6_flowlabel

When users set params.spp_address and get a trans, ipv6_flowlabel flag
should be applied into this trans. But even if this one is not an ipv6
trans, it should not go to apply it into all other transes of the asoc
but simply ignore it.

Fixes: 0b0dce7a36fb ("sctp: add spp_ipv6_flowlabel and spp_dscp for sctp_paddrparams")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: fix invalid reference to the index variable of the iterator

Now in sctp_apply_peer_addr_params(), if SPP_IPV6_FLOWLABEL flag is set
and trans is NULL, it would use trans as the index variable to traverse
transport_addr_list, then trans is set as the last transport of it.

Later, if SPP_DSCP flag is set, it would enter into the wrong branch as
trans is actually an invalid reference.

So fix it by using a new index variable to traverse transport_addr_list
for both SPP_DSCP and SPP_IPV6_FLOWLABEL flags process.

Fixes: 0b0dce7a36fb ("sctp: add spp_ipv6_flowlabel and spp_dscp for sctp_paddrparams")
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/ibm/emac: wrong emac_calc_base call was used by typo

__emac_calc_base_mr1 was used instead of __emac4_calc_base_mr1
by copy-paste mistake for emac4syn.

Fixes: 45d6e545505fd32edb812f085be7de45b6a5c0af ("net/ibm/emac: add 8192 rx/tx fifo size")
Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: null actions array pointer before releasing action

Currently, tcf_action_delete() nulls actions array pointer after putting
and deleting it. However, if tcf_idr_delete_index() returns an error,
pointer to action is not set to null. That results it being released second
time in error handling code of tca_action_gd().

Kasan error:

[  807.367755] ==================================================================
[  807.375844] BUG: KASAN: use-after-free in tc_setup_cb_call+0x14e/0x250
[  807.382763] Read of size 8 at addr ffff88033e636000 by task tc/2732

[  807.391289] CPU: 0 PID: 2732 Comm: tc Tainted: G        W         4.19.0-rc1+ #799
[  807.399542] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[  807.407948] Call Trace:
[  807.410763]  dump_stack+0x92/0xeb
[  807.414456]  print_address_description+0x70/0x360
[  807.419549]  kasan_report+0x14d/0x300
[  807.423582]  ? tc_setup_cb_call+0x14e/0x250
[  807.428150]  tc_setup_cb_call+0x14e/0x250
[  807.432539]  ? nla_put+0x65/0xe0
[  807.436146]  fl_dump+0x394/0x3f0 [cls_flower]
[  807.440890]  ? fl_tmplt_dump+0x140/0x140 [cls_flower]
[  807.446327]  ? lock_downgrade+0x320/0x320
[  807.450702]  ? lock_acquire+0xe2/0x220
[  807.454819]  ? is_bpf_text_address+0x5/0x140
[  807.459475]  ? memcpy+0x34/0x50
[  807.462980]  ? nla_put+0x65/0xe0
[  807.466582]  tcf_fill_node+0x341/0x430
[  807.470717]  ? tcf_block_put+0xe0/0xe0
[  807.474859]  tcf_node_dump+0xdb/0xf0
[  807.478821]  fl_walk+0x8e/0x170 [cls_flower]
[  807.483474]  tcf_chain_dump+0x35a/0x4d0
[  807.487703]  ? tfilter_notify+0x170/0x170
[  807.492091]  ? tcf_fill_node+0x430/0x430
[  807.496411]  tc_dump_tfilter+0x362/0x3f0
[  807.500712]  ? tc_del_tfilter+0x850/0x850
[  807.505104]  ? kasan_unpoison_shadow+0x30/0x40
[  807.509940]  ? __mutex_unlock_slowpath+0xcf/0x410
[  807.515031]  netlink_dump+0x263/0x4f0
[  807.519077]  __netlink_dump_start+0x2a0/0x300
[  807.523817]  ? tc_del_tfilter+0x850/0x850
[  807.528198]  rtnetlink_rcv_msg+0x46a/0x6d0
[  807.532671]  ? rtnl_fdb_del+0x3f0/0x3f0
[  807.536878]  ? tc_del_tfilter+0x850/0x850
[  807.541280]  netlink_rcv_skb+0x18d/0x200
[  807.545570]  ? rtnl_fdb_del+0x3f0/0x3f0
[  807.549773]  ? netlink_ack+0x500/0x500
[  807.553913]  netlink_unicast+0x2d0/0x370
[  807.558212]  ? netlink_attachskb+0x340/0x340
[  807.562855]  ? _copy_from_iter_full+0xe9/0x3e0
[  807.567677]  ? import_iovec+0x11e/0x1c0
[  807.571890]  netlink_sendmsg+0x3b9/0x6a0
[  807.576192]  ? netlink_unicast+0x370/0x370
[  807.580684]  ? netlink_unicast+0x370/0x370
[  807.585154]  sock_sendmsg+0x6b/0x80
[  807.589015]  ___sys_sendmsg+0x4a1/0x520
[  807.593230]  ? copy_msghdr_from_user+0x210/0x210
[  807.598232]  ? do_wp_page+0x174/0x880
[  807.602276]  ? __handle_mm_fault+0x749/0x1c10
[  807.607021]  ? __handle_mm_fault+0x1046/0x1c10
[  807.611849]  ? __pmd_alloc+0x320/0x320
[  807.615973]  ? check_chain_key+0x140/0x1f0
[  807.620450]  ? check_chain_key+0x140/0x1f0
[  807.624929]  ? __fget_light+0xbc/0xd0
[  807.628970]  ? __sys_sendmsg+0xd7/0x150
[  807.633172]  __sys_sendmsg+0xd7/0x150
[  807.637201]  ? __ia32_sys_shutdown+0x30/0x30
[  807.641846]  ? up_read+0x53/0x90
[  807.645442]  ? __do_page_fault+0x484/0x780
[  807.649949]  ? do_syscall_64+0x1e/0x2c0
[  807.654164]  do_syscall_64+0x72/0x2c0
[  807.658198]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  807.663625] RIP: 0033:0x7f42e9870150
[  807.667568] Code: 8b 15 3c 7d 2b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb cd 66 0f 1f 44 00 00 83 3d b9 d5 2b 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be cd 00 00 48 89 04 24
[  807.687328] RSP: 002b:00007ffdbf595b58 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[  807.695564] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f42e9870150
[  807.703083] RDX: 0000000000000000 RSI: 00007ffdbf595b80 RDI: 0000000000000003
[  807.710605] RBP: 00007ffdbf599d90 R08: 0000000000679bc0 R09: 000000000000000f
[  807.718127] R10: 00000000000005e7 R11: 0000000000000246 R12: 00007ffdbf599d88
[  807.725651] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000

[  807.735048] Allocated by task 2687:
[  807.738902]  kasan_kmalloc+0xa0/0xd0
[  807.742852]  __kmalloc+0x118/0x2d0
[  807.746615]  tcf_idr_create+0x44/0x320
[  807.750738]  tcf_nat_init+0x41e/0x530 [act_nat]
[  807.755638]  tcf_action_init_1+0x4e0/0x650
[  807.760104]  tcf_action_init+0x1ce/0x2d0
[  807.764395]  tcf_exts_validate+0x1d8/0x200
[  807.768861]  fl_change+0x55a/0x26b4 [cls_flower]
[  807.773845]  tc_new_tfilter+0x748/0xa20
[  807.778051]  rtnetlink_rcv_msg+0x56a/0x6d0
[  807.782517]  netlink_rcv_skb+0x18d/0x200
[  807.786804]  netlink_unicast+0x2d0/0x370
[  807.791095]  netlink_sendmsg+0x3b9/0x6a0
[  807.795387]  sock_sendmsg+0x6b/0x80
[  807.799240]  ___sys_sendmsg+0x4a1/0x520
[  807.803445]  __sys_sendmsg+0xd7/0x150
[  807.807473]  do_syscall_64+0x72/0x2c0
[  807.811506]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

[  807.818776] Freed by task 2728:
[  807.822283]  __kasan_slab_free+0x122/0x180
[  807.826752]  kfree+0xf4/0x2f0
[  807.830080]  __tcf_action_put+0x5a/0xb0
[  807.834281]  tcf_action_put_many+0x46/0x70
[  807.838747]  tca_action_gd+0x232/0xc40
[  807.842862]  tc_ctl_action+0x215/0x230
[  807.846977]  rtnetlink_rcv_msg+0x56a/0x6d0
[  807.851444]  netlink_rcv_skb+0x18d/0x200
[  807.855731]  netlink_unicast+0x2d0/0x370
[  807.860021]  netlink_sendmsg+0x3b9/0x6a0
[  807.864312]  sock_sendmsg+0x6b/0x80
[  807.868166]  ___sys_sendmsg+0x4a1/0x520
[  807.872372]  __sys_sendmsg+0xd7/0x150
[  807.876401]  do_syscall_64+0x72/0x2c0
[  807.880431]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

[  807.887704] The buggy address belongs to the object at ffff88033e636000
                which belongs to the cache kmalloc-256 of size 256
[  807.900909] The buggy address is located 0 bytes inside of
                256-byte region [ffff88033e636000, ffff88033e636100)
[  807.913155] The buggy address belongs to the page:
[  807.918322] page:ffffea000cf98d80 count:1 mapcount:0 mapping:ffff88036f80ee00 index:0x0 compound_mapcount: 0
[  807.928831] flags: 0x5fff8000008100(slab|head)
[  807.933647] raw: 005fff8000008100 ffffea000db44f00 0000000400000004 ffff88036f80ee00
[  807.942050] raw: 0000000000000000 0000000080190019 00000001ffffffff 0000000000000000
[  807.950456] page dumped because: kasan: bad access detected

[  807.958240] Memory state around the buggy address:
[  807.963405]  ffff88033e635f00: fc fc fc fc fb fb fb fb fb fb fb fc fc fc fc fb
[  807.971288]  ffff88033e635f80: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc
[  807.979166] >ffff88033e636000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  807.994882]                    ^
[  807.998477]  ffff88033e636080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  808.006352]  ffff88033e636100: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
[  808.014230] ==================================================================
[  808.022108] Disabling lock debugging due to kernel taint

Fixes: edfaf94fa705 ("net_sched: improve and refactor tcf_action_put_many()")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vhost: fix VHOST_GET_BACKEND_FEATURES ioctl request definition

The _IOC_READ flag fits this ioctl request more because this request
actually only writes to, but doesn't read from userspace.
See NOTEs in include/uapi/asm-generic/ioctl.h for more information.

Fixes: 429711aec282 ("vhost: switch to use new message format")
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8169: add support for NCube 8168 network card

This card identifies itself as:
Ethernet controller [0200]: NCube Device [10ff:8168] (rev 06)
Subsystem: TP-LINK Technologies Co., Ltd. Device [7470:3468]

Adding a new entry to rtl8169_pci_tbl makes the card work.

Link: http://launchpad.net/bugs/1788730
Signed-off-by: Anthony Wong <anthony.wong@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6_tunnel: respect ttl inherit for ip6tnl

man ip-tunnel ttl section says:
0 is a special value meaning that packets inherit the TTL value.

IPv4 tunnel respect this in ip_tunnel_xmit(), but IPv6 tunnel has not
implement it yet. To make IPv6 behave consistently with IP tunnel,
add ipv6 tunnel inherit support.

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mac80211: shorten the IBSS debug messages

When tracing is enabled, all the debug messages are recorded and must
not exceed MAX_MSG_LEN (100) columns. Longer debug messages grant the
user with:

WARNING: CPU: 3 PID: 32642 at /tmp/wifi-core-20180806094828/src/iwlwifi-stack-dev/net/mac80211/./trace_msg.h:32 trace_event_raw_event_mac80211_msg_event+0xab/0xc0 [mac80211]
Workqueue: phy1 ieee80211_iface_work [mac80211]
RIP: 0010:trace_event_raw_event_mac80211_msg_event+0xab/0xc0 [mac80211]
Call Trace:
  __sdata_dbg+0xbd/0x120 [mac80211]
  ieee80211_ibss_rx_queued_mgmt+0x15f/0x510 [mac80211]
  ieee80211_iface_work+0x21d/0x320 [mac80211]

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: don't Tx a deauth frame if the AP forbade Tx

If the driver fails to properly prepare for the channel
switch, mac80211 will disconnect. If the CSA IE had mode
set to 1, it means that the clients are not allowed to send
any Tx on the current channel, and that includes the
deauthentication frame.

Make sure that we don't send the deauthentication frame in
this case.

In iwlwifi, this caused a failure to flush queues since the
firmware already closed the queues after having parsed the
CSA IE. Then mac80211 would wait until the deauthentication
frame would go out (drv_flush(drop=false)) and that would
never happen.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: Fix station bandwidth setting after channel switch

When performing a channel switch flow for a managed interface, the
flow did not update the bandwidth of the AP station and the rate
scale algorithm. In case of a channel width downgrade, this would
result with the rate scale algorithm using a bandwidth that does not
match the interface channel configuration.

Fix this by updating the AP station bandwidth and rate scaling algorithm
before the actual channel change in case of a bandwidth downgrade, or
after the actual channel change in case of a bandwidth upgrade.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: fix a race between restart and CSA flows

We hit a problem with iwlwifi that was caused by a bug in
mac80211. A bug in iwlwifi caused the firwmare to crash in
certain cases in channel switch. Because of that bug,
drv_pre_channel_switch would fail and trigger the restart
flow.
Now we had the hw restart worker which runs on the system's
workqueue and the csa_connection_drop_work worker that runs
on mac80211's workqueue that can run together. This is
obviously problematic since the restart work wants to
reconfigure the connection, while the csa_connection_drop_work
worker does the exact opposite: it tries to disconnect.

Fix this by cancelling the csa_connection_drop_work worker
in the restart worker.

Note that this can sound racy: we could have:

driver   iface_work   CSA_work   restart_work
+++++++++++++++++++++++++++++++++++++++++++++
              |
<--drv_cs ---|
<FW CRASH!>
-CS FAILED-->
              |                       |
              |                 cancel_work(CSA)
           schedule                   |
           CSA work                   |
                         |            |
                        Race between those 2

But this is not possible because we flush the workqueue
in the restart worker before we cancel the CSA worker.
That would be bullet proof if we could guarantee that
we schedule the CSA worker only from the iface_work
which runs on the workqueue (and not on the system's
workqueue), but unfortunately we do have an instance
in which we schedule the CSA work outside the context
of the workqueue (ieee80211_chswitch_done).

Note also that we should probably cancel other workers
like beacon_connection_loss_work and possibly others
for different types of interfaces, at the very least,
IBSS should suffer from the exact same problem, but for
now, do the minimum to fix the actual bug that was actually
experienced and reproduced.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: fix WMM TXOP calculation

In commit 9236c4523e5b ("mac80211: limit wmm params to comply
with ETSI requirements"), we have limited the WMM parameters to
comply with 802.11 and ETSI standard. Mistakenly the TXOP value
was caluclated wrong. Fix it by taking the minimum between
802.11 to ETSI to make sure we are not violating both.

Fixes: e552af058148 ("mac80211: limit wmm params to comply with ETSI requirements")
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211: fix a type issue in ieee80211_chandef_to_operating_class()

The "chandef->center_freq1" variable is a u32 but "freq" is a u16 so we
are truncating away the high bits.  I noticed this bug because in commit
9cf0a0b4b64a ("cfg80211: Add support for 60GHz band channels 5 and 6")
we made "freq <= 56160 + 2160 * 6" a valid requency when before it was
only "freq <= 56160 + 2160 * 4" that was valid.  It introduces a static
checker warning:

    net/wireless/util.c:1571 ieee80211_chandef_to_operating_class()
    warn: always true condition '(freq <= 56160 + 2160 * 6) => (0-u16max <= 69120)'

But really we probably shouldn't have been truncating the high bits
away to begin with.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: fix an off-by-one issue in A-MSDU max_subframe computation

Initialize 'n' to 2 in order to take into account also the first
packet in the estimation of max_subframe limit for a given A-MSDU
since frag_tail pointer is NULL when ieee80211_amsdu_aggregate
routine analyzes the second frame.

Fixes: 6e0456b54545 ("mac80211: add A-MSDU tx support")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Merge tag 'dma-mapping-4.19-2' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping fixes from Christoph Hellwig:
"A few fixes for the fallout of being a little more pedantic about dma
  masks"

* tag 'dma-mapping-4.19-2' of git://git.infradead.org/users/hch/dma-mapping:
  of/platform: initialise AMBA default DMA masks
  sparc: set a default 32-bit dma mask for OF devices
  kernel/dma/direct: take DMA offset into account in dma_direct_supported