Chenyuan Mi [Tue, 7 Sep 2021 12:26:33 +0000 (20:26 +0800)]
drm/nouveau/svm: Fix refcount leak bug and missing check against null bug
[ Upstream commit
6bb8c2d51811eb5e6504f49efe3b089d026009d2 ]
The reference counting issue happens in one exception handling path of
nouveau_svmm_bind(). When cli->svm.svmm is null, the function forgets
to decrease the refcount of mm increased by get_task_mm(), causing a
refcount leak.
Fix this issue by using mmput() to decrease the refcount in the
exception handling path.
Also, the function forgets to do check against null when get mm
by get_task_mm().
Fix this issue by adding null check after get mm by get_task_mm().
Signed-off-by: Chenyuan Mi <cymi20@fudan.edu.cn>
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Fixes:
822cab6150d3 ("drm/nouveau/svm: check for SVM initialized before migrating")
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210907122633.16665-1-cymi20@fudan.edu.cn
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/14
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Sun, 31 Oct 2021 15:31:35 +0000 (16:31 +0100)]
ACPI: PMIC: Fix intel_pmic_regs_handler() read accesses
[ Upstream commit
009a789443fe4c8e6b1ecb7c16b4865c026184cd ]
The handling of PMIC register reads through writing 0 to address 4
of the OpRegion is wrong. Instead of returning the read value
through the value64, which is a no-op for function == ACPI_WRITE calls,
store the value and then on a subsequent function == ACPI_READ with
address == 3 (the address for the value field of the OpRegion)
return the stored value.
This has been tested on a Xiaomi Mi Pad 2 and makes the ACPI battery dev
there mostly functional (unfortunately there are still other issues).
Here are the SET() / GET() functions of the PMIC ACPI device,
which use this OpRegion, which clearly show the new behavior to
be correct:
OperationRegion (REGS, 0x8F, Zero, 0x50)
Field (REGS, ByteAcc, NoLock, Preserve)
{
CLNT, 8,
SA, 8,
OFF, 8,
VAL, 8,
RWM, 8
}
Method (GET, 3, Serialized)
{
If ((AVBE == One))
{
CLNT = Arg0
SA = Arg1
OFF = Arg2
RWM = Zero
If ((AVBG == One))
{
GPRW = Zero
}
}
Return (VAL) /* \_SB_.PCI0.I2C7.PMI5.VAL_ */
}
Method (SET, 4, Serialized)
{
If ((AVBE == One))
{
CLNT = Arg0
SA = Arg1
OFF = Arg2
VAL = Arg3
RWM = One
If ((AVBG == One))
{
GPRW = One
}
}
}
Fixes:
0afa877a5650 ("ACPI / PMIC: intel: add REGS operation region support")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Brett Creeley [Thu, 9 Sep 2021 21:38:08 +0000 (14:38 -0700)]
ice: Fix not stopping Tx queues for VFs
[ Upstream commit
b385cca47363316c6d9a74ae9db407bbc281f815 ]
When a VF is removed and/or reset its Tx queues need to be
stopped from the PF. This is done by calling the ice_dis_vf_qs()
function, which calls ice_vsi_stop_lan_tx_rings(). Currently
ice_dis_vf_qs() is protected by the VF state bit ICE_VF_STATE_QS_ENA.
Unfortunately, this is causing the Tx queues to not be disabled in some
cases and when the VF tries to re-enable/reconfigure its Tx queues over
virtchnl the op is failing. This is because a VF can be reset and/or
removed before the ICE_VF_STATE_QS_ENA bit is set, but the Tx queues
were already configured via ice_vsi_cfg_single_txq() in the
VIRTCHNL_OP_CONFIG_VSI_QUEUES op. However, the ICE_VF_STATE_QS_ENA bit
is set on a successful VIRTCHNL_OP_ENABLE_QUEUES, which will always
happen after the VIRTCHNL_OP_CONFIG_VSI_QUEUES op.
This was causing the following error message when loading the ice
driver, creating VFs, and modifying VF trust in an endless loop:
[35274.192484] ice 0000:88:00.0: Failed to set LAN Tx queue context, error: ICE_ERR_PARAM
[35274.193074] ice 0000:88:00.0: VF 0 failed opcode 6, retval: -5
[35274.193640] iavf 0000:88:01.0: PF returned error -5 (IAVF_ERR_PARAM) to our request 6
Fix this by always calling ice_dis_vf_qs() and silencing the error
message in ice_vsi_stop_tx_ring() since the calling code ignores the
return anyway. Also, all other places that call ice_vsi_stop_tx_ring()
catch the error, so this doesn't affect those flows since there was no
change to the values the function returns.
Other solutions were considered (i.e. tracking which VF queues had been
"started/configured" in VIRTCHNL_OP_CONFIG_VSI_QUEUES, but it seemed
more complicated than it was worth. This solution also brings in the
chance for other unexpected conditions due to invalid state bit checks.
So, the proposed solution seemed like the best option since there is no
harm in failing to stop Tx queues that were never started.
This issue can be seen using the following commands:
for i in {0..50}; do
rmmod ice
modprobe ice
sleep 1
echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs
echo 1 > /sys/class/net/ens785f1/device/sriov_numvfs
ip link set ens785f1 vf 0 trust on
ip link set ens785f0 vf 0 trust on
sleep 2
echo 0 > /sys/class/net/ens785f0/device/sriov_numvfs
echo 0 > /sys/class/net/ens785f1/device/sriov_numvfs
sleep 1
echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs
echo 1 > /sys/class/net/ens785f1/device/sriov_numvfs
ip link set ens785f1 vf 0 trust on
ip link set ens785f0 vf 0 trust on
done
Fixes:
77ca27c41705 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sylwester Dziedziuch [Thu, 6 May 2021 15:40:03 +0000 (08:40 -0700)]
ice: Fix replacing VF hardware MAC to existing MAC filter
[ Upstream commit
ce572a5b88d5ca6737b5e23da9892792fd708ad3 ]
VF was not able to change its hardware MAC address in case
the new address was already present in the MAC filter list.
Change the handling of VF add mac request to not return
if requested MAC address is already present on the list
and check if its hardware MAC needs to be updated in this case.
Fixes:
ed4c068d46f6 ("ice: Enable ip link show on the PF to display VF unicast MAC(s)")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ziyang Xuan [Tue, 2 Nov 2021 02:12:18 +0000 (10:12 +0800)]
net: vlan: fix a UAF in vlan_dev_real_dev()
[ Upstream commit
563bcbae3ba233c275c244bfce2efe12938f5363 ]
The real_dev of a vlan net_device may be freed after
unregister_vlan_dev(). Access the real_dev continually by
vlan_dev_real_dev() will trigger the UAF problem for the
real_dev like following:
==================================================================
BUG: KASAN: use-after-free in vlan_dev_real_dev+0xf9/0x120
Call Trace:
kasan_report.cold+0x83/0xdf
vlan_dev_real_dev+0xf9/0x120
is_eth_port_of_netdev_filter.part.0+0xb1/0x2c0
is_eth_port_of_netdev_filter+0x28/0x40
ib_enum_roce_netdev+0x1a3/0x300
ib_enum_all_roce_netdevs+0xc7/0x140
netdevice_event_work_handler+0x9d/0x210
...
Freed by task 9288:
kasan_save_stack+0x1b/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0xfc/0x130
slab_free_freelist_hook+0xdd/0x240
kfree+0xe4/0x690
kvfree+0x42/0x50
device_release+0x9f/0x240
kobject_put+0x1c8/0x530
put_device+0x1b/0x30
free_netdev+0x370/0x540
ppp_destroy_interface+0x313/0x3d0
...
Move the put_device(real_dev) to vlan_dev_free(). Ensure
real_dev not be freed before vlan_dev unregistered.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+e4df4e1389e28972e955@syzkaller.appspotmail.com
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stafford Horne [Wed, 3 Nov 2021 11:19:33 +0000 (20:19 +0900)]
openrisc: fix SMP tlb flush NULL pointer dereference
[ Upstream commit
27dff9a9c247d4e38d82c2e7234914cfe8499294 ]
Throughout the OpenRISC kernel port VMA is passed as NULL when flushing
kernel tlb entries. Somehow this was missed when I was testing
c28b27416da9 ("openrisc: Implement proper SMP tlb flushing") and now the
SMP kernel fails to completely boot.
In OpenRISC VMA is used only to determine which cores need to have their
TLB entries flushed.
This patch updates the logic to flush tlbs on all cores when the VMA is
passed as NULL. Also, we update places VMA is passed as NULL to use
flush_tlb_kernel_range instead. Now, the only place VMA is passed as
NULL is in the implementation of flush_tlb_kernel_range.
Fixes:
c28b27416da9 ("openrisc: Implement proper SMP tlb flushing")
Reported-by: Jan Henrik Weinstock <jan.weinstock@rwth-aachen.de>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jakub Kicinski [Tue, 2 Nov 2021 22:02:36 +0000 (15:02 -0700)]
ethtool: fix ethtool msg len calculation for pause stats
[ Upstream commit
1aabe578dd86e9f2867c4db4fba9a15f4ba1825d ]
ETHTOOL_A_PAUSE_STAT_MAX is the MAX attribute id,
so we need to subtract non-stats and add one to
get a count (IOW -2+1 == -1).
Otherwise we'll see:
ethnl cmd 21: calculated reply length 40, but consumed 52
Fixes:
9a27a33027f2 ("ethtool: add standard pause stats")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maxim Kiselev [Mon, 1 Nov 2021 15:23:41 +0000 (18:23 +0300)]
net: davinci_emac: Fix interrupt pacing disable
[ Upstream commit
d52bcb47bdf971a59a2467975d2405fcfcb2fa19 ]
This patch allows to use 0 for `coal->rx_coalesce_usecs` param to
disable rx irq coalescing.
Previously we could enable rx irq coalescing via ethtool
(For ex: `ethtool -C eth0 rx-usecs 2000`) but we couldn't disable
it because this part rejects 0 value:
if (!coal->rx_coalesce_usecs)
return -EINVAL;
Fixes:
84da2658a619 ("TI DaVinci EMAC : Implement interrupt pacing functionality.")
Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20211101152343.4193233-1-bigunclemax@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
YueHaibing [Fri, 8 Oct 2021 07:44:17 +0000 (15:44 +0800)]
xen-pciback: Fix return in pm_ctrl_init()
[ Upstream commit
4745ea2628bb43a7ec34b71763b5a56407b33990 ]
Return NULL instead of passing to ERR_PTR while err is zero,
this fix smatch warnings:
drivers/xen/xen-pciback/conf_space_capability.c:163
pm_ctrl_init() warn: passing zero to 'ERR_PTR'
Fixes:
a92336a1176b ("xen/pciback: Drop two backends, squash and cleanup some code.")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20211008074417.8260-1-yuehaibing@huawei.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Thu, 19 Aug 2021 20:48:08 +0000 (22:48 +0200)]
i2c: xlr: Fix a resource leak in the error handling path of 'xlr_i2c_probe()'
[ Upstream commit
7f98960c046ee1136e7096aee168eda03aef8a5d ]
A successful 'clk_prepare()' call should be balanced by a corresponding
'clk_unprepare()' call in the error handling path of the probe, as already
done in the remove function.
More specifically, 'clk_prepare_enable()' is used, but 'clk_disable()' is
also already called. So just the unprepare step has still to be done.
Update the error handling path accordingly.
Fixes:
75d31c2372e4 ("i2c: xlr: add support for Sigma Designs controller variant")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Wed, 27 Oct 2021 01:56:40 +0000 (21:56 -0400)]
NFSv4: Fix a regression in nfs_set_open_stateid_locked()
[ Upstream commit
01d29f87fcfef38d51ce2b473981a5c1e861ac0a ]
If we already hold open state on the client, yet the server gives us a
completely different stateid to the one we already hold, then we
currently treat it as if it were an out-of-sequence update, and wait for
5 seconds for other updates to come in.
This commit fixes the behaviour so that we immediately start processing
of the new stateid, and then leave it to the call to
nfs4_test_and_free_stateid() to decide what to do with the old stateid.
Fixes:
b4868b44c562 ("NFSv4: Wait for stateid updates after CLOSE/OPEN_DOWNGRADE")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Quinn Tran [Tue, 26 Oct 2021 11:54:02 +0000 (04:54 -0700)]
scsi: qla2xxx: Turn off target reset during issue_lip
[ Upstream commit
0b7a9fd934a68ebfc1019811b7bdc1742072ad7b ]
When user uses issue_lip to do link bounce, driver sends additional target
reset to remote device before resetting the link. The target reset would
affect other paths with active I/Os. This patch will remove the unnecessary
target reset.
Link: https://lore.kernel.org/r/20211026115412.27691-4-njavali@marvell.com
Fixes:
5854771e314e ("[SCSI] qla2xxx: Add ISPFX00 specific bus reset routine")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Quinn Tran [Tue, 26 Oct 2021 11:54:01 +0000 (04:54 -0700)]
scsi: qla2xxx: Fix gnl list corruption
[ Upstream commit
c98c5daaa24b583cba1369b7d167f93c6ae7299c ]
Current code does list element deletion and addition in and out of lock
protection. This patch moves deletion behind lock.
list_add double add: new=
ffff9130b5eb89f8, prev=
ffff9130b5eb89f8,
next=
ffff9130c6a715f0.
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:31!
invalid opcode: 0000 [#1] SMP PTI
CPU: 1 PID: 182395 Comm: kworker/1:37 Kdump: loaded Tainted: G W OE
--------- - - 4.18.0-193.el8.x86_64 #1
Hardware name: HP ProLiant DL160 Gen8, BIOS J03 02/10/2014
Workqueue: qla2xxx_wq qla2x00_iocb_work_fn [qla2xxx]
RIP: 0010:__list_add_valid+0x41/0x50
Code: 85 94 00 00 00 48 39 c7 74 0b 48 39 d7 74 06 b8 01 00 00 00 c3 48 89 f2
4c 89 c1 48 89 fe 48 c7 c7 60 83 ad 97 e8 4d bd ce ff <0f> 0b 0f 1f 00 66 2e
0f 1f 84 00 00 00 00 00 48 8b 07 48 8b 57 08
RSP: 0018:
ffffaba306f47d68 EFLAGS:
00010046
RAX:
0000000000000058 RBX:
ffff9130b5eb8800 RCX:
0000000000000006
RDX:
0000000000000000 RSI:
0000000000000096 RDI:
ffff9130b7456a00
RBP:
ffff9130c6a70a58 R08:
000000000008d7be R09:
0000000000000001
R10:
0000000000000000 R11:
0000000000000001 R12:
ffff9130c6a715f0
R13:
ffff9130b5eb8824 R14:
ffff9130b5eb89f8 R15:
ffff9130b5eb89f8
FS:
0000000000000000(0000) GS:
ffff9130b7440000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007efcaaef11a0 CR3:
000000005200a002 CR4:
00000000000606e0
Call Trace:
qla24xx_async_gnl+0x113/0x3c0 [qla2xxx]
? qla2x00_iocb_work_fn+0x53/0x80 [qla2xxx]
? process_one_work+0x1a7/0x3b0
? worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
? kthread+0x112/0x130
Link: https://lore.kernel.org/r/20211026115412.27691-3-njavali@marvell.com
Fixes:
726b85487067 ("qla2xxx: Add framework for async fabric discovery")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Quinn Tran [Tue, 26 Oct 2021 11:54:00 +0000 (04:54 -0700)]
scsi: qla2xxx: Relogin during fabric disturbance
[ Upstream commit
bb2ca6b3f09ac20e8357d257d0557ab5ddf6adcd ]
For RSCN of type "Area, Domain, or Fabric", which indicate a portion or
entire fabric was disturbed, current driver does not set the scan_need flag
to indicate a session was affected by the disturbance. This in turn can
lead to I/O timeout and delay of relogin. Hence initiate relogin in the
event of fabric disturbance.
Link: https://lore.kernel.org/r/20211026115412.27691-2-njavali@marvell.com
Fixes:
1560bafdff9e ("scsi: qla2xxx: Use complete switch scan for RSCN events")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Saurav Kashyap [Tue, 10 Aug 2021 04:37:10 +0000 (21:37 -0700)]
scsi: qla2xxx: Changes to support FCP2 Target
[ Upstream commit
44c57f205876518b14ab2b4b5d88a181f41260bb ]
Add changes to support FCP2 Target.
Link: https://lore.kernel.org/r/20210810043720.1137-5-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jackie Liu [Tue, 7 Sep 2021 02:49:04 +0000 (10:49 +0800)]
ar7: fix kernel builds for compiler test
[ Upstream commit
28b7ee33a2122569ac065cad578bf23f50cc65c3 ]
TI AR7 Watchdog Timer is only build for 32bit.
Avoid error like:
In file included from drivers/watchdog/ar7_wdt.c:29:
./arch/mips/include/asm/mach-ar7/ar7.h: In function ‘ar7_is_titan’:
./arch/mips/include/asm/mach-ar7/ar7.h:111:24: error: implicit declaration of function ‘KSEG1ADDR’; did you mean ‘CKSEG1ADDR’? [-Werror=implicit-function-declaration]
111 | return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x24)) & 0xffff) ==
| ^~~~~~~~~
| CKSEG1ADDR
Fixes:
da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible")
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210907024904.4127611-1-liu.yun@linux.dev
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ahmad Fatoum [Mon, 9 Aug 2021 16:20:31 +0000 (18:20 +0200)]
watchdog: f71808e_wdt: fix inaccurate report in WDIOC_GETTIMEOUT
[ Upstream commit
164483c735190775f29d0dcbac0363adc51a068d ]
The fintek watchdog timer can configure timeouts of second granularity
only up to 255 seconds. Beyond that, the timeout needs to be configured
with minute granularity. WDIOC_GETTIMEOUT should report the actual
timeout configured, not just echo back the timeout configured by the
user. Do so.
Fixes:
96cb4eb019ce ("watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E and F71882FG")
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/5e17960fe8cc0e3cb2ba53de4730b75d9a0f33d5.1628525954.git-series.a.fatoum@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Sun, 3 Oct 2021 00:02:23 +0000 (17:02 -0700)]
m68k: set a default value for MEMORY_RESERVE
[ Upstream commit
1aaa557b2db95c9506ed0981bc34505c32d6b62b ]
'make randconfig' can produce a .config file with
"CONFIG_MEMORY_RESERVE=" (no value) since it has no default.
When a subsequent 'make all' is done, kconfig restarts the config
and prompts for a value for MEMORY_RESERVE. This breaks
scripting/automation where there is no interactive user input.
Add a default value for MEMORY_RESERVE. (Any integer value will
work here for kconfig.)
Fixes a kconfig warning:
.config:214:warning: symbol value '' invalid for MEMORY_RESERVE
* Restart config...
Memory reservation (MiB) (MEMORY_RESERVE) [] (NEW)
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2") # from beginning of git history
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric W. Biederman [Wed, 20 Oct 2021 17:43:52 +0000 (12:43 -0500)]
signal/sh: Use force_sig(SIGKILL) instead of do_group_exit(SIGKILL)
[ Upstream commit
ce0ee4e6ac99606f3945f4d47775544edc3f7985 ]
Today the sh code allocates memory the first time a process uses
the fpu. If that memory allocation fails, kill the affected task
with force_sig(SIGKILL) rather than do_group_exit(SIGKILL).
Calling do_group_exit from an exception handler can potentially lead
to dead locks as do_group_exit is not designed to be called from
interrupt context. Instead use force_sig(SIGKILL) to kill the
userspace process. Sending signals in general and force_sig in
particular has been tested from interrupt context so there should be
no problems.
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Fixes:
0ea820cf9bf5 ("sh: Move over to dynamically allocated FPU context.")
Link: https://lkml.kernel.org/r/20211020174406.17889-6-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lars-Peter Clausen [Sat, 23 Oct 2021 13:41:01 +0000 (15:41 +0200)]
dmaengine: dmaengine_desc_callback_valid(): Check for `callback_result`
[ Upstream commit
e7e1e880b114ca640a2f280b0d5d38aed98f98c6 ]
Before the `callback_result` callback was introduced drivers coded their
invocation to the callback in a similar way to:
if (cb->callback) {
spin_unlock(&dma->lock);
cb->callback(cb->callback_param);
spin_lock(&dma->lock);
}
With the introduction of `callback_result` two helpers where introduced to
transparently handle both types of callbacks. And drivers where updated to
look like this:
if (dmaengine_desc_callback_valid(cb)) {
spin_unlock(&dma->lock);
dmaengine_desc_callback_invoke(cb, ...);
spin_lock(&dma->lock);
}
dmaengine_desc_callback_invoke() correctly handles both `callback_result`
and `callback`. But we forgot to update the dmaengine_desc_callback_valid()
function to check for `callback_result`. As a result DMA descriptors that
use the `callback_result` rather than `callback` don't have their callback
invoked by drivers that follow the pattern above.
Fix this by checking for both `callback` and `callback_result` in
dmaengine_desc_callback_valid().
Fixes:
f067025bc676 ("dmaengine: add support to provide error result from a DMA transation")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20211023134101.28042-1-lars@metafoo.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Westphal [Wed, 20 Oct 2021 16:08:10 +0000 (18:08 +0200)]
netfilter: nfnetlink_queue: fix OOB when mac header was cleared
[ Upstream commit
5648b5e1169ff1d6d6a46c35c0b5fbebd2a5cbb2 ]
On 64bit platforms the MAC header is set to 0xffff on allocation and
also when a helper like skb_unset_mac_header() is called.
dev_parse_header may call skb_mac_header() which assumes valid mac offset:
BUG: KASAN: use-after-free in eth_header_parse+0x75/0x90
Read of size 6 at addr
ffff8881075a5c05 by task nf-queue/1364
Call Trace:
memcpy+0x20/0x60
eth_header_parse+0x75/0x90
__nfqnl_enqueue_packet+0x1a61/0x3380
__nf_queue+0x597/0x1300
nf_queue+0xf/0x40
nf_hook_slow+0xed/0x190
nf_hook+0x184/0x440
ip_output+0x1c0/0x2a0
nf_reinject+0x26f/0x700
nfqnl_recv_verdict+0xa16/0x18b0
nfnetlink_rcv_msg+0x506/0xe70
The existing code only works if the skb has a mac header.
Fixes:
2c38de4c1f8da7 ("netfilter: fix looped (broad|multi)cast's MAC handling")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Robert-Ionut Alexa [Fri, 23 Apr 2021 09:01:51 +0000 (12:01 +0300)]
soc: fsl: dpaa2-console: free buffer before returning from dpaa2_console_read
[ Upstream commit
8120bd469f5525da229953c1197f2b826c0109f4 ]
Free the kbuf buffer before returning from the dpaa2_console_read()
function. The variable no longer goes out of scope, leaking the storage
it points to.
Fixes:
c93349d8c170 ("soc: fsl: add DPAA2 console support")
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Tue, 19 Oct 2021 14:45:09 +0000 (16:45 +0200)]
auxdisplay: ht16k33: Fix frame buffer device blanking
[ Upstream commit
840fe258332544aa7321921e1723d37b772af7a9 ]
As the ht16k33 frame buffer sub-driver does not register an
fb_ops.fb_blank() handler, blanking does not work:
$ echo 1 > /sys/class/graphics/fb0/blank
sh: write error: Invalid argument
Fix this by providing a handler that always returns zero, to make sure
blank events will be sent to the actual device handling the backlight.
Reported-by: Robin van der Gracht <robin@protonic.nl>
Suggested-by: Robin van der Gracht <robin@protonic.nl>
Fixes:
8992da44c6805d53 ("auxdisplay: ht16k33: Driver for LED controller")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Tue, 19 Oct 2021 14:45:08 +0000 (16:45 +0200)]
auxdisplay: ht16k33: Connect backlight to fbdev
[ Upstream commit
80f9eb70fd9276938f0a131f76d438021bfd8b34 ]
Currently /sys/class/graphics/fb0/bl_curve is not accessible (-ENODEV),
as the driver does not connect the backlight to the frame buffer device.
Fix this moving backlight initialization up, and filling in
fb_info.bl_dev.
Fixes:
8992da44c6805d53 ("auxdisplay: ht16k33: Driver for LED controller")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Tue, 19 Oct 2021 14:45:02 +0000 (16:45 +0200)]
auxdisplay: img-ascii-lcd: Fix lock-up when displaying empty string
[ Upstream commit
afcb5a811ff3ab3969f09666535eb6018a160358 ]
While writing an empty string to a device attribute is a no-op, and thus
does not need explicit safeguards, the user can still write a single
newline to an attribute file:
echo > .../message
If that happens, img_ascii_lcd_display() trims the newline, yielding an
empty string, and causing an infinite loop in img_ascii_lcd_scroll().
Fix this by adding a check for empty strings. Clear the display in case
one is encountered.
Fixes:
0cad855fbd083ee5 ("auxdisplay: img-ascii-lcd: driver for simple ASCII LCD displays")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexey Gladkov [Thu, 14 Oct 2021 16:02:30 +0000 (18:02 +0200)]
Fix user namespace leak
[ Upstream commit
d5f458a979650e5ed37212f6134e4ee2b28cb6ed ]
Fixes:
61ca2c4afd9d ("NFS: Only reference user namespace from nfs4idmap struct instead of cred")
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Tue, 5 Oct 2021 18:05:02 +0000 (14:05 -0400)]
NFS: Fix an Oops in pnfs_mark_request_commit()
[ Upstream commit
f0caea8882a7412a2ad4d8274f0280cdf849c9e2 ]
Olga reports seeing the following Oops when doing O_DIRECT writes to a
pNFS flexfiles server:
Oops: 0000 [#1] SMP PTI
CPU: 1 PID: 234186 Comm: kworker/u8:1 Not tainted 5.15.0-rc4+ #4
Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.13.0-2.module+el8.3.0+7353+
9de0a3cc 04/01/2014
Workqueue: nfsiod rpc_async_release [sunrpc]
RIP: 0010:nfs_mark_request_commit+0x12/0x30 [nfs]
Code: ff ff be 03 00 00 00 e8 ac 34 83 eb e9 29 ff ff
ff e8 22 bc d7 eb 66 90 0f 1f 44 00 00 48 85 f6 74 16 48 8b 42 10 48
8b 40 18 <48> 8b 40 18 48 85 c0 74 05 e9 70 fc 15 ec 48 89 d6 e9 68 ed
ff ff
RSP: 0018:
ffffa82f0159fe00 EFLAGS:
00010286
RAX:
0000000000000000 RBX:
ffff8f3393141880 RCX:
0000000000000000
RDX:
ffffa82f0159fe08 RSI:
ffff8f3381252500 RDI:
ffff8f3393141880
RBP:
ffff8f33ac317c00 R08:
0000000000000000 R09:
ffff8f3487724cb0
R10:
0000000000000008 R11:
0000000000000001 R12:
0000000000000001
R13:
ffff8f3485bccee0 R14:
ffff8f33ac317c10 R15:
ffff8f33ac317cd8
FS:
0000000000000000(0000) GS:
ffff8f34fbc80000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000018 CR3:
0000000122120006 CR4:
0000000000770ee0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
PKRU:
55555554
Call Trace:
nfs_direct_write_completion+0x13b/0x250 [nfs]
rpc_free_task+0x39/0x60 [sunrpc]
rpc_async_release+0x29/0x40 [sunrpc]
process_one_work+0x1ce/0x370
worker_thread+0x30/0x380
? process_one_work+0x370/0x370
kthread+0x11a/0x140
? set_kthread_struct+0x40/0x40
ret_from_fork+0x22/0x30
Reported-by: Olga Kornievskaia <aglo@umich.edu>
Fixes:
9c455a8c1e14 ("NFS/pNFS: Clean up pNFS commit operations")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Mon, 4 Oct 2021 19:37:42 +0000 (15:37 -0400)]
NFS: Fix up commit deadlocks
[ Upstream commit
133a48abf6ecc535d7eddc6da1c3e4c972445882 ]
If O_DIRECT bumps the commit_info rpcs_out field, then that could lead
to fsync() hangs. The fix is to ensure that O_DIRECT calls
nfs_commit_end().
Fixes:
723c921e7dfc ("sched/wait, fs/nfs: Convert wait_on_atomic_t() usage to the new wait_var_event() API")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Claudiu Beznea [Thu, 7 Oct 2021 11:12:28 +0000 (14:12 +0300)]
dmaengine: at_xdmac: fix AT_XDMAC_CC_PERID() macro
[ Upstream commit
320c88a3104dc955f928a1eecebd551ff89530c0 ]
AT_XDMAC_CC_PERID() should be used to setup bits 24..30 of XDMAC_CC
register. Using it without parenthesis around 0x7f & (i) will lead to
setting all the time zero for bits 24..30 of XDMAC_CC as the << operator
has higher precedence over bitwise &. Thus, add paranthesis around
0x7f & (i).
Fixes:
15a03850ab8f ("dmaengine: at_xdmac: fix macro typo")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211007111230.2331837-3-claudiu.beznea@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Tue, 12 Oct 2021 10:10:28 +0000 (13:10 +0300)]
rtc: rv3032: fix error handling in rv3032_clkout_set_rate()
[ Upstream commit
c3336b8ac6091df60a5c1049a8c685d0b947cc61 ]
Do not call rv3032_exit_eerd() if the enter function fails but don't
forget to call the exit when the enter succeeds.
Fixes:
2eeaa532acca ("rtc: rv3032: Add a driver for Microcrystal RV-3032")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211012101028.GT2083@kadam
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sat, 4 Sep 2021 11:37:32 +0000 (13:37 +0200)]
remoteproc: Fix a memory leak in an error handling path in 'rproc_handle_vdev()'
[ Upstream commit
0374a4ea7269645c46c3eb288526ea072fa19e79 ]
If 'copy_dma_range_map() fails, the memory allocated for 'rvdev' will leak.
Move the 'copy_dma_range_map()' call after the device registration so
that 'rproc_rvdev_release()' can be called to free some resources.
Also, branch to the error handling path if 'copy_dma_range_map()' instead
of a direct return to avoid some other leaks.
Fixes:
e0d072782c73 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jim Quinlan <james.quinlan@broadcom.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/e6d0dad6620da4fdf847faa903f79b735d35f262.1630755377.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zev Weiss [Thu, 14 Oct 2021 20:39:52 +0000 (13:39 -0700)]
mtd: core: don't remove debugfs directory if device is in use
[ Upstream commit
c13de2386c78e890d4ae6f01a85eefd0b293fb08 ]
Previously, if del_mtd_device() failed with -EBUSY due to a non-zero
usecount, a subsequent call to attempt the deletion again would try to
remove a debugfs directory that had already been removed and panic.
With this change the second call can instead proceed safely.
Fixes:
e8e3edb95ce6 ("mtd: create per-device and module-scope debugfs entries")
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211014203953.5424-1-zev@bewilderbeest.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kunihiko Hayashi [Sat, 18 Sep 2021 00:22:59 +0000 (09:22 +0900)]
PCI: uniphier: Serialize INTx masking/unmasking and fix the bit operation
[ Upstream commit
4caab28a6215da5f3c1b505ff08810bc6acfe365 ]
The condition register PCI_RCV_INTX is used in irq_mask() and irq_unmask()
callbacks. Accesses to register can occur at the same time without a lock.
Add a lock into each callback to prevent the issue.
And INTX mask and unmask fields in PCL_RCV_INTX register should only be
set/reset for each bit. Clearing by PCL_RCV_INTX_ALL_MASK should be
removed.
INTX status fields in PCL_RCV_INTX register only indicates each INTX
interrupt status, so the handler can't clear by writing 1 to the field.
The status is expected to be cleared by the interrupt origin.
The ack function has no meaning, so should remove it.
Suggested-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/1631924579-24567-1-git-send-email-hayashi.kunihiko@socionext.com
Fixes:
7e6d5cd88a6f ("PCI: uniphier: Add UniPhier PCIe host controller support")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Evgeny Novikov [Fri, 9 Jul 2021 14:45:29 +0000 (17:45 +0300)]
mtd: spi-nor: hisi-sfc: Remove excessive clk_disable_unprepare()
[ Upstream commit
78e4d342187625585932bb437ec26e1060f7fc6f ]
hisi_spi_nor_probe() invokes clk_disable_unprepare() on all paths after
successful call of clk_prepare_enable(). Besides, the clock is enabled by
hispi_spi_nor_prep() and disabled by hispi_spi_nor_unprep(). So at remove
time it is not possible to have the clock enabled. The patch removes
excessive clk_disable_unprepare() from hisi_spi_nor_remove().
Found by Linux Driver Verification project (linuxtesting.org).
Fixes:
e523f11141bd ("mtd: spi-nor: add hisilicon spi-nor flash controller driver")
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20210709144529.31379-1-novikov@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jia-Ju Bai [Tue, 9 Mar 2021 08:00:20 +0000 (00:00 -0800)]
fs: orangefs: fix error return code of orangefs_revalidate_lookup()
[ Upstream commit
4c2b46c824a78fc8190d8eafaaea5a9078fe7479 ]
When op_alloc() returns NULL to new_op, no error return code of
orangefs_revalidate_lookup() is assigned.
To fix this bug, ret is assigned with -ENOMEM in this case.
Fixes:
8bb8aefd5afb ("OrangeFS: Change almost all instances of the string PVFS2 to OrangeFS.")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Mon, 4 Oct 2021 19:44:16 +0000 (15:44 -0400)]
NFS: Fix deadlocks in nfs_scan_commit_list()
[ Upstream commit
64a93dbf25d3a1368bb58ddf0f61d0a92d7479e3 ]
Partially revert commit
2ce209c42c01 ("NFS: Wait for requests that are
locked on the commit list"), since it can lead to deadlocks between
commit requests and nfs_join_page_group().
For now we should assume that any locked requests on the commit list are
either about to be removed and committed by another task, or the writes
they describe are about to be retransmitted. In either case, we should
not need to worry.
Fixes:
2ce209c42c01 ("NFS: Wait for requests that are locked on the commit list")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
YueHaibing [Fri, 8 Oct 2021 07:46:52 +0000 (15:46 +0800)]
opp: Fix return in _opp_add_static_v2()
[ Upstream commit
27ff8187f13ecfec8a26fb1928e906f46f326cc5 ]
Fix sparse warning:
drivers/opp/of.c:924 _opp_add_static_v2() warn: passing zero to 'ERR_PTR'
For duplicate OPPs 'ret' be set to zero.
Fixes:
deac8703da5f ("PM / OPP: _of_add_opp_table_v2(): increment count only if OPP is added")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pali Rohár [Tue, 5 Oct 2021 18:09:43 +0000 (20:09 +0200)]
PCI: aardvark: Fix preserving PCI_EXP_RTCTL_CRSSVE flag on emulated bridge
[ Upstream commit
d419052bc6c60fa4ab2b5a51d5f1e55a66e2b4ff ]
Commit
43f5c77bcbd2 ("PCI: aardvark: Fix reporting CRS value") started
using CRSSVE flag for handling CRS responses.
PCI_EXP_RTCTL_CRSSVE flag is stored only in emulated config space buffer
and there is handler for PCI_EXP_RTCTL register. So every read operation
from config space automatically clears CRSSVE flag as it is not defined in
PCI_EXP_RTCTL read handler.
Fix this by reading current CRSSVE bit flag from emulated space buffer and
appending it to PCI_EXP_RTCTL read response.
Link: https://lore.kernel.org/r/20211005180952.6812-5-kabel@kernel.org
Fixes:
43f5c77bcbd2 ("PCI: aardvark: Fix reporting CRS value")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Behún [Tue, 5 Oct 2021 18:09:42 +0000 (20:09 +0200)]
PCI: aardvark: Don't spam about PIO Response Status
[ Upstream commit
464de7e7fff767e87429cd7be09c4f2cb50a6ccb ]
Use dev_dbg() instead of dev_err() in advk_pcie_check_pio_status().
For example CRS is not an error status, it just says that the request
should be retried.
Link: https://lore.kernel.org/r/20211005180952.6812-4-kabel@kernel.org
Fixes:
8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alex Xu (Hello71) [Thu, 7 Oct 2021 06:37:06 +0000 (02:37 -0400)]
drm/plane-helper: fix uninitialized variable reference
[ Upstream commit
7be28bd73f23e53d6e7f5fe891ba9503fc0c7210 ]
drivers/gpu/drm/drm_plane_helper.c: In function 'drm_primary_helper_update':
drivers/gpu/drm/drm_plane_helper.c:113:32: error: 'visible' is used uninitialized [-Werror=uninitialized]
113 | struct drm_plane_state plane_state = {
| ^~~~~~~~~~~
drivers/gpu/drm/drm_plane_helper.c:178:14: note: 'visible' was declared here
178 | bool visible;
| ^~~~~~~
cc1: all warnings being treated as errors
visible is an output, not an input. in practice this use might turn out
OK but it's still UB.
Fixes:
df86af9133b4 ("drm/plane-helper: Add drm_plane_helper_check_state()")
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20211007063706.305984-1-alex_y_xu@yahoo.ca
Signed-off-by: Sasha Levin <sashal@kernel.org>
Baptiste Lepers [Mon, 6 Sep 2021 01:59:24 +0000 (11:59 +1000)]
pnfs/flexfiles: Fix misplaced barrier in nfs4_ff_layout_prepare_ds
[ Upstream commit
a2915fa06227b056a8f9b0d79b61dca08ad5cfc6 ]
_nfs4_pnfs_v3/v4_ds_connect do
some work
smp_wmb
ds->ds_clp = clp;
And nfs4_ff_layout_prepare_ds currently does
smp_rmb
if(ds->ds_clp)
...
This patch places the smp_rmb after the if. This ensures that following
reads only happen once nfs4_ff_layout_prepare_ds has checked that data
has been properly initialized.
Fixes:
d67ae825a59d6 ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Baptiste Lepers <baptiste.lepers@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Wed, 29 Sep 2021 12:12:53 +0000 (08:12 -0400)]
NFS: Fix dentry verifier races
[ Upstream commit
cec08f452a687fce9dfdf47946d00a1d12a8bec5 ]
If the directory changed while we were revalidating the dentry, then
don't update the dentry verifier. There is no value in setting the
verifier to an older value, and we could end up overwriting a more up to
date verifier from a parallel revalidation.
Fixes:
efeda80da38d ("NFSv4: Fix revalidation of dentries with delegations")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kewei Xu [Fri, 17 Sep 2021 10:14:10 +0000 (18:14 +0800)]
i2c: mediatek: fixing the incorrect register offset
[ Upstream commit
b8228aea5a19d5111a7bf44f7de6749d1f5d487a ]
The reason for the modification here is that the previous
offset information is incorrect, OFFSET_DEBUGSTAT = 0xE4 is
the correct value.
Fixes:
25708278f810 ("i2c: mediatek: Add i2c support for MediaTek MT8183")
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
J. Bruce Fields [Tue, 14 Sep 2021 16:30:32 +0000 (12:30 -0400)]
nfsd: don't alloc under spinlock in rpc_parse_scope_id
[ Upstream commit
9b6e27d01adcec58e046c624874f8a124e8b07ec ]
Dan Carpenter says:
The patch
d20c11d86d8f: "nfsd: Protect session creation and client
confirm using client_lock" from Jul 30, 2014, leads to the following
Smatch static checker warning:
net/sunrpc/addr.c:178 rpc_parse_scope_id()
warn: sleeping in atomic context
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes:
d20c11d86d8f ("nfsd: Protect session creation and client...")
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnaud Pouliquen [Mon, 12 Jul 2021 12:39:12 +0000 (14:39 +0200)]
rpmsg: Fix rpmsg_create_ept return when RPMSG config is not defined
[ Upstream commit
537d3af1bee8ad1415fda9b622d1ea6d1ae76dfa ]
According to the description of the rpmsg_create_ept in rpmsg_core.c
the function should return NULL on error.
Fixes:
2c8a57088045 ("rpmsg: Provide function stubs for API")
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210712123912.10672-1-arnaud.pouliquen@foss.st.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tom Rix [Sun, 4 Oct 2020 14:24:22 +0000 (07:24 -0700)]
apparmor: fix error check
[ Upstream commit
d108370c644b153382632b3e5511ade575c91c86 ]
clang static analysis reports this representative problem:
label.c:1463:16: warning: Assigned value is garbage or undefined
label->hname = name;
^ ~~~~
In aa_update_label_name(), this the problem block of code
if (aa_label_acntsxprint(&name, ...) == -1)
return res;
On failure, aa_label_acntsxprint() has a more complicated return
that just -1. So check for a negative return.
It was also noted that the aa_label_acntsxprint() main comment refers
to a nonexistent parameter, so clean up the comment.
Fixes:
f1bd904175e8 ("apparmor: add the base fns() for domain labels")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Sun, 31 Oct 2021 15:25:22 +0000 (16:25 +0100)]
power: supply: bq27xxx: Fix kernel crash on IRQ handler register error
[ Upstream commit
cdf10ffe8f626d8a2edc354abf063df0078b2d71 ]
When registering the IRQ handler fails, do not just return the error code,
this will free the devm_kzalloc()-ed data struct while leaving the queued
work queued and the registered power_supply registered with both of them
now pointing to free-ed memory, resulting in various kernel crashes
soon afterwards.
Instead properly tear-down things on IRQ handler register errors.
Fixes:
703df6c09795 ("power: bq27xxx_battery: Reorganize I2C into a module")
Cc: Andrew F. Davis <afd@ti.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Fri, 29 Oct 2021 09:58:16 +0000 (11:58 +0200)]
mips: cm: Convert to bitfield API to fix out-of-bounds access
[ Upstream commit
18b8f5b6fc53d097cadb94a93d8d6566ba88e389 ]
mips_cm_error_report() extracts the cause and other cause from the error
register using shifts. This works fine for the former, as it is stored
in the top bits, and the shift will thus remove all non-related bits.
However, the latter is stored in the bottom bits, hence thus needs masking
to get rid of non-related bits. Without such masking, using it as an
index into the cm2_causes[] array will lead to an out-of-bounds access,
probably causing a crash.
Fix this by using FIELD_GET() instead. Bite the bullet and convert all
MIPS CM handling to the bitfield API, to improve readability and safety.
Fixes:
3885c2b463f6a236 ("MIPS: CM: Add support for reporting CM cache errors")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xuan Zhuo [Wed, 20 Oct 2021 11:23:23 +0000 (19:23 +0800)]
virtio_ring: check desc == NULL when using indirect with packed
[ Upstream commit
fc6d70f40b3d0b3219e2026d05be0409695f620d ]
When using indirect with packed, we don't check for allocation failures.
This patch checks that and fall back on direct.
Fixes:
1ce9e6055fa0 ("virtio_ring: introduce packed ring support")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20211020112323.67466-3-xuanzhuo@linux.alibaba.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Richard Fitzgerald [Thu, 28 Oct 2021 14:09:01 +0000 (15:09 +0100)]
ASoC: cs42l42: Correct configuring of switch inversion from ts-inv
[ Upstream commit
778a0cbef5fb76bf506f84938517bb77e7a1c478 ]
The setting from the cirrus,ts-inv property should be applied to the
TIP_SENSE_INV bit, as this is the one that actually affects the jack
detect block. The TS_INV bit only swaps the meaning of the PLUG and
UNPLUG interrupts and should always be 1 for the interrupts to have
the normal meaning.
Due to some misunderstanding the driver had been implemented to
configure the TS_INV bit based on the jack switch polarity. This made
the interrupts behave the correct way around, but left the jack detect
block, button detect and analogue circuits always interpreting an open
switch as unplugged.
The signal chain inside the codec is:
SENSE pin -> TIP_SENSE_INV -> TS_INV -> (invert) -> interrupts
|
v
Jack detect,
button detect and
analog control
As the TIP_SENSE_INV already performs the necessary inversion the
TS_INV bit never needs to change. It must always be 1 to yield the
expected interrupt behaviour.
Some extra confusion has arisen because of the additional invert in the
interrupt path, meaning that a value applied to the TS_INV bit produces
the opposite effect of applying it to the TIP_SENSE_INV bit. The ts-inv
property has therefore always had the opposite effect to what might be
expected (0 = inverted, 1 = not inverted). To maintain the meaning of
the ts-inv property it must be inverted when applied to TIP_SENSE_INV.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes:
2c394ca79604 ("ASoC: Add support for CS42L42 codec")
Link: https://lore.kernel.org/r/20211028140902.11786-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Richard Fitzgerald [Mon, 26 Apr 2021 15:53:02 +0000 (16:53 +0100)]
ASoC: cs42l42: Use device_property API instead of of_property
[ Upstream commit
ab78322a0dc8e5e472ff66ac7e18c94acc17587f ]
Use the device_property APIs so that the code will work on devicetree
and ACPI systems.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210426155303.853236-2-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lucas Tanure [Sat, 6 Mar 2021 18:55:45 +0000 (18:55 +0000)]
ASoC: cs42l42: Disable regulators if probe fails
[ Upstream commit
1abca8e1c77bd9c5f5c0bed21c5b075b6852a178 ]
In case of cs42l42_i2c_probe() fail, the regulators were left enabled.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210306185553.62053-8-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bixuan Cui [Thu, 28 Oct 2021 07:28:22 +0000 (15:28 +0800)]
powerpc/44x/fsp2: add missing of_node_put
[ Upstream commit
290fe8aa69ef5c51c778c0bb33f8ef0181c769f5 ]
Early exits from for_each_compatible_node() should decrement the
node reference counter. Reported by Coccinelle:
./arch/powerpc/platforms/44x/fsp2.c:206:1-25: WARNING: Function
"for_each_compatible_node" should have of_node_put() before return
around line 218.
Fixes:
7813043e1bbc ("powerpc/44x/fsp2: Add irq error handlers")
Signed-off-by: Bixuan Cui <cuibixuan@linux.alibaba.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1635406102-88719-1-git-send-email-cuibixuan@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrej Shadura [Tue, 19 Oct 2021 15:29:17 +0000 (17:29 +0200)]
HID: u2fzero: properly handle timeouts in usb_submit_urb
[ Upstream commit
43775e62c4b784f44a159e13ba80e6146a42d502 ]
The wait_for_completion_timeout function returns 0 if timed out or a
positive value if completed. Hence, "less than zero" comparison always
misses timeouts and doesn't kill the URB as it should, leading to
re-sending it while it is active.
Fixes:
42337b9d4d95 ("HID: add driver for U2F Zero built-in LED and RNG")
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrej Shadura [Tue, 19 Oct 2021 15:29:16 +0000 (17:29 +0200)]
HID: u2fzero: clarify error check and length calculations
[ Upstream commit
b7abf78b7a6c4a29a6e0ba0bb883fe44a2f3d693 ]
The previous commit fixed handling of incomplete packets but broke error
handling: offsetof returns an unsigned value (size_t), but when compared
against the signed return value, the return value is interpreted as if
it were unsigned, so negative return values are never less than the
offset.
To make the code easier to read, calculate the minimal packet length
once and separately, and assign it to a signed int variable to eliminate
unsigned math and the need for type casts. It then becomes immediately
obvious how the actual data length is calculated and why the return
value cannot be less than the minimal length.
Fixes:
22d65765f211 ("HID: u2fzero: ignore incomplete packets without data")
Fixes:
42337b9d4d95 ("HID: add driver for U2F Zero built-in LED and RNG")
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Claudiu Beznea [Mon, 11 Oct 2021 11:27:11 +0000 (14:27 +0300)]
clk: at91: sam9x60-pll: use DIV_ROUND_CLOSEST_ULL
[ Upstream commit
f12d028b743bb6136da60b17228a1b6162886444 ]
Use DIV_ROUND_CLOSEST_ULL() to avoid any inconsistency b/w the rate
computed in sam9x60_frac_pll_recalc_rate() and the one computed in
sam9x60_frac_pll_compute_mul_frac().
Fixes:
43b1bb4a9b3e1 ("clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20211011112719.3951784-8-claudiu.beznea@microchip.com
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anssi Hannula [Tue, 26 Oct 2021 10:27:41 +0000 (13:27 +0300)]
serial: xilinx_uartps: Fix race condition causing stuck TX
[ Upstream commit
88b20f84f0fe47409342669caf3e58a3fc64c316 ]
xilinx_uartps .start_tx() clears TXEMPTY when enabling TXEMPTY to avoid
any previous TXEVENT event asserting the UART interrupt. This clear
operation is done immediately after filling the TX FIFO.
However, if the bytes inserted by cdns_uart_handle_tx() are consumed by
the UART before the TXEMPTY is cleared, the clear operation eats the new
TXEMPTY event as well, causing cdns_uart_isr() to never receive the
TXEMPTY event. If there are bytes still queued in circbuf, TX will get
stuck as they will never get transferred to FIFO (unless new bytes are
queued to circbuf in which case .start_tx() is called again).
While the racy missed TXEMPTY occurs fairly often with short data
sequences (e.g. write 1 byte), in those cases circbuf is usually empty
so no action on TXEMPTY would have been needed anyway. On the other
hand, longer data sequences make the race much more unlikely as UART
takes longer to consume the TX FIFO. Therefore it is rare for this race
to cause visible issues in general.
Fix the race by clearing the TXEMPTY bit in ISR *before* filling the
FIFO.
The TXEMPTY bit in ISR will only get asserted at the exact moment the
TX FIFO *becomes* empty, so clearing the bit before filling FIFO does
not cause an extra immediate assertion even if the FIFO is initially
empty.
This is hard to reproduce directly on a normal system, but inserting
e.g. udelay(200) after cdns_uart_handle_tx(port), setting 4000000 baud,
and then running "dd if=/dev/zero bs=128 of=/dev/ttyPS0 count=50"
reliably reproduces the issue on my ZynqMP test system unless this fix
is applied.
Fixes:
85baf542d54e ("tty: xuartps: support 64 byte FIFO size")
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Link: https://lore.kernel.org/r/20211026102741.2910441-1-anssi.hannula@bitwise.fi
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sandeep Maheswaram [Mon, 25 Oct 2021 04:19:35 +0000 (09:49 +0530)]
phy: qcom-snps: Correct the FSEL_MASK
[ Upstream commit
b475bf0ec40a2b13fb32ef62f5706576d5858460 ]
The FSEL_MASK which selects the refclock is defined incorrectly.
It should be [4:6] not [5:7]. Due to this incorrect definition, the BIT(7)
in USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0 is reset which keeps PHY analog
blocks ON during suspend.
Fix this issue by correctly defining the FSEL_MASK.
Fixes:
51e8114f80d0 ("phy: qcom-snps: Add SNPS USB PHY driver for QCOM based SOCs")
Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com>
Link: https://lore.kernel.org/r/1635135575-5668-1-git-send-email-quic_c_sanm@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Tue, 14 Sep 2021 11:00:38 +0000 (14:00 +0300)]
phy: ti: gmii-sel: check of_get_address() for failure
[ Upstream commit
8d55027f4e2c04146a75fb63371ab96ccc887f2c ]
Smatch complains that if of_get_address() returns NULL, then "size"
isn't initialized. Also it would lead to an Oops.
Fixes:
7f78322cdd67 ("phy: ti: gmii-sel: retrieve ports number and base offset from dt")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20210914110038.GB11657@kili
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Zapolskiy [Wed, 22 Sep 2021 23:35:48 +0000 (02:35 +0300)]
phy: qcom-qusb2: Fix a memory leak on probe
[ Upstream commit
bf7ffcd0069d30e2e7ba2b827f08c89f471cd1f3 ]
On success nvmem_cell_read() returns a pointer to a dynamically allocated
buffer, and therefore it shall be freed after usage.
The issue is reported by kmemleak:
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff3b3803e4b280 (size 128):
comm "kworker/u16:1", pid 107, jiffies
4294892861 (age 94.120s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
000000007739afdc>] __kmalloc+0x27c/0x41c
[<
0000000071c0fbf8>] nvmem_cell_read+0x40/0xe0
[<
00000000e803ef1f>] qusb2_phy_init+0x258/0x5bc
[<
00000000fc81fcfa>] phy_init+0x70/0x110
[<
00000000e3d48a57>] dwc3_core_soft_reset+0x4c/0x234
[<
0000000027d1dbd4>] dwc3_core_init+0x68/0x990
[<
000000001965faf9>] dwc3_probe+0x4f4/0x730
[<
000000002f7617ca>] platform_probe+0x74/0xf0
[<
00000000a2576cac>] really_probe+0xc4/0x470
[<
00000000bc77f2c5>] __driver_probe_device+0x11c/0x190
[<
00000000130db71f>] driver_probe_device+0x48/0x110
[<
0000000019f36c2b>] __device_attach_driver+0xa4/0x140
[<
00000000e5812ff7>] bus_for_each_drv+0x84/0xe0
[<
00000000f4bac574>] __device_attach+0xe4/0x1c0
[<
00000000d3beb631>] device_initial_probe+0x20/0x30
[<
000000008019b9db>] bus_probe_device+0xa4/0xb0
Fixes:
ca04d9d3e1b1 ("phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210922233548.2150244-1-vladimir.zapolskiy@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rahul Tanwar [Wed, 20 Oct 2021 09:38:15 +0000 (17:38 +0800)]
pinctrl: equilibrium: Fix function addition in multiple groups
[ Upstream commit
53b3947ddb7f309d1f611f8dc9bfd6ea9d699907 ]
Ignore the same function with multiple groups.
Fix a typo in error print.
Fixes:
1948d5c51dba ("pinctrl: Add pinmux & GPIO controller driver for a new SoC")
Signed-off-by: Rahul Tanwar <rtanwar@maxlinear.com>
Link: https://lore.kernel.org/r/20211020093815.20870-1-rtanwar@maxlinear.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wan Jiabing [Thu, 14 Oct 2021 08:30:17 +0000 (04:30 -0400)]
soc: qcom: apr: Add of_node_put() before return
[ Upstream commit
72f1aa6205d84337b90b065f602a8fe190821781 ]
Fix following coccicheck warning:
./drivers/soc/qcom/apr.c:485:1-23: WARNING: Function
for_each_child_of_node should have of_node_put() before return
Early exits from for_each_child_of_node should decrement the
node reference counter.
Fixes:
834735662602 ("soc: qcom: apr: Add avs/audio tracking functionality")
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211014083017.19714-1-wanjiabing@vivo.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guru Das Srinagesh [Mon, 11 Oct 2021 20:00:14 +0000 (13:00 -0700)]
firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
[ Upstream commit
38212b2a8a6fc4c3a6fa99d7445b833bedc9a67c ]
Since __qcom_scm_is_call_available() returns bool, have it return false
instead of -EINVAL if an invalid SMC convention is detected.
This fixes the Smatch static checker warning:
drivers/firmware/qcom_scm.c:255 __qcom_scm_is_call_available()
warn: signedness bug returning '(-22)'
Fixes:
9d11af8b06a8 ("firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1633982414-28347-1-git-send-email-quic_gurus@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Amelie Delaunay [Tue, 5 Oct 2021 09:53:05 +0000 (11:53 +0200)]
usb: dwc2: drd: reset current session before setting the new one
[ Upstream commit
1ad707f559f7cb12c64f3d7cb37f0b1ea27c1058 ]
If role is changed without the "none" step, A- and B- valid session could
be set at the same time. It is an issue.
This patch resets A-session if role switch sets B-session, and resets
B-session if role switch sets A-session.
Then, it is possible to change the role without the "none" step.
Fixes:
17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support")
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211005095305.66397-4-amelie.delaunay@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Amelie Delaunay [Tue, 5 Oct 2021 09:53:04 +0000 (11:53 +0200)]
usb: dwc2: drd: fix dwc2_drd_role_sw_set when clock could be disabled
[ Upstream commit
8d387f61b0240854e81450c261beb775065bad5d ]
In case of USB_DR_MODE_PERIPHERAL, the OTG clock is disabled at the end of
the probe (it is not the case if USB_DR_MODE_HOST or USB_DR_MODE_OTG).
The clock is then enabled on udc_start.
If dwc2_drd_role_sw_set is called before udc_start (it is the case if the
usb cable is plugged at boot), GOTGCTL and GUSBCFG registers cannot be
read/written, so session cannot be overridden.
To avoid this case, check the ll_hw_enabled value and enable the clock if
it is available, and disable it after the override.
Fixes:
17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support")
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211005095305.66397-3-amelie.delaunay@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Amelie Delaunay [Tue, 5 Oct 2021 09:53:03 +0000 (11:53 +0200)]
usb: dwc2: drd: fix dwc2_force_mode call in dwc2_ovr_init
[ Upstream commit
b2cab2a24fb5d13ce1d384ecfb6de827fa08a048 ]
Instead of forcing the role to Device, check the dr_mode configuration.
If the core is Host only, force the mode to Host, this to avoid the
dwc2_force_mode warning:
WARNING: CPU: 1 PID: 21 at drivers/usb/dwc2/core.c:615 dwc2_drd_init+0x104/0x17c
When forcing mode to Host, dwc2_force_mode may sleep the time the host
role is applied. To avoid sleeping while atomic context, move the call
to dwc2_force_mode after spin_unlock_irqrestore. It is safe, as
interrupts are not yet unmasked here.
Fixes:
17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support")
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211005095305.66397-2-amelie.delaunay@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Agner [Wed, 20 Oct 2021 19:26:42 +0000 (21:26 +0200)]
serial: imx: fix detach/attach of serial console
[ Upstream commit
6d0d1b5a1b4870911beb89544ec1a9751c42fec7 ]
If the device used as a serial console gets detached/attached at runtime,
register_console() will try to call imx_uart_setup_console(), but this
is not possible since it is marked as __init.
For instance
# cat /sys/devices/virtual/tty/console/active
tty1 ttymxc0
# echo -n N > /sys/devices/virtual/tty/console/subsystem/ttymxc0/console
# echo -n Y > /sys/devices/virtual/tty/console/subsystem/ttymxc0/console
[ 73.166649] 8<--- cut here ---
[ 73.167005] Unable to handle kernel paging request at virtual address
c154d928
[ 73.167601] pgd =
55433e84
[ 73.167875] [
c154d928] *pgd=
8141941e(bad)
[ 73.168304] Internal error: Oops:
8000000d [#1] SMP ARM
[ 73.168429] Modules linked in:
[ 73.168522] CPU: 0 PID: 536 Comm: sh Not tainted 5.15.0-rc6-00056-g3968ddcf05fb #3
[ 73.168675] Hardware name: Freescale i.MX6 Ultralite (Device Tree)
[ 73.168791] PC is at imx_uart_console_setup+0x0/0x238
[ 73.168927] LR is at try_enable_new_console+0x98/0x124
[ 73.169056] pc : [<
c154d928>] lr : [<
c0196f44>] psr:
a0000013
[ 73.169178] sp :
c2ef5e70 ip :
00000000 fp :
00000000
[ 73.169281] r10:
00000000 r9 :
c02cf970 r8 :
00000000
[ 73.169389] r7 :
00000001 r6 :
00000001 r5 :
c1760164 r4 :
c1e0fb08
[ 73.169512] r3 :
c154d928 r2 :
00000000 r1 :
efffcbd1 r0 :
c1760164
[ 73.169641] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 73.169782] Control:
10c5387d Table:
8345406a DAC:
00000051
[ 73.169895] Register r0 information: non-slab/vmalloc memory
[ 73.170032] Register r1 information: non-slab/vmalloc memory
[ 73.170158] Register r2 information: NULL pointer
[ 73.170273] Register r3 information: non-slab/vmalloc memory
[ 73.170397] Register r4 information: non-slab/vmalloc memory
[ 73.170521] Register r5 information: non-slab/vmalloc memory
[ 73.170647] Register r6 information: non-paged memory
[ 73.170771] Register r7 information: non-paged memory
[ 73.170892] Register r8 information: NULL pointer
[ 73.171009] Register r9 information: non-slab/vmalloc memory
[ 73.171142] Register r10 information: NULL pointer
[ 73.171259] Register r11 information: NULL pointer
[ 73.171375] Register r12 information: NULL pointer
[ 73.171494] Process sh (pid: 536, stack limit = 0xcd1ba82f)
[ 73.171621] Stack: (0xc2ef5e70 to 0xc2ef6000)
[ 73.171731] 5e60: ???????? ???????? ???????? ????????
[ 73.171899] 5e80: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.172059] 5ea0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.172217] 5ec0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.172377] 5ee0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.172537] 5f00: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.172698] 5f20: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.172856] 5f40: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.173016] 5f60: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.173177] 5f80: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.173336] 5fa0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.173496] 5fc0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.173654] 5fe0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.173826] [<
c0196f44>] (try_enable_new_console) from [<
c01984a8>] (register_console+0x10c/0x2ec)
[ 73.174053] [<
c01984a8>] (register_console) from [<
c06e2c90>] (console_store+0x14c/0x168)
[ 73.174262] [<
c06e2c90>] (console_store) from [<
c0383718>] (kernfs_fop_write_iter+0x110/0x1cc)
[ 73.174470] [<
c0383718>] (kernfs_fop_write_iter) from [<
c02cf5f4>] (vfs_write+0x31c/0x548)
[ 73.174679] [<
c02cf5f4>] (vfs_write) from [<
c02cf970>] (ksys_write+0x60/0xec)
[ 73.174863] [<
c02cf970>] (ksys_write) from [<
c0100080>] (ret_fast_syscall+0x0/0x1c)
[ 73.175052] Exception stack(0xc2ef5fa8 to 0xc2ef5ff0)
[ 73.175167] 5fa0: ???????? ???????? ???????? ???????? ???????? ????????
[ 73.175327] 5fc0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
[ 73.175486] 5fe0: ???????? ???????? ???????? ????????
[ 73.175608] Code:
00000000 00000000 00000000 00000000 (
00000000)
[ 73.175744] ---[ end trace
9b75121265109bf1 ]---
A similar issue could be triggered by unbinding/binding the serial
console device [*].
Drop __init so that imx_uart_setup_console() can be safely called at
runtime.
[*] https://lore.kernel.org/all/
20181114174940.7865-3-stefan@agner.ch/
Fixes:
a3cb39d258ef ("serial: core: Allow detach and attach serial device for console")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20211020192643.476895-2-francesco.dolcini@toradex.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Srinivas Kandagatla [Tue, 14 Sep 2021 09:22:14 +0000 (10:22 +0100)]
scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
[ Upstream commit
b6ca770ae7f2c560a29bbd02c4e3d734fafaf804 ]
UFS drivers that probe defer will end up leaking memory allocated for clk
and regulator names via kstrdup() because the structure that is holding
this memory is allocated via devm_* variants which will be freed during
probe defer but the names are never freed.
Use same devm_* variant of kstrdup to free the memory allocated to name
when driver probe defers.
Kmemleak found around 11 leaks on Qualcomm Dragon Board RB5:
unreferenced object 0xffff66f243fb2c00 (size 128):
comm "kworker/u16:0", pid 7, jiffies
4294893319 (age 94.848s)
hex dump (first 32 bytes):
63 6f 72 65 5f 63 6c 6b 00 76 69 72 74 75 61 6c core_clk.virtual
2f 77 6f 72 6b 71 75 65 75 65 2f 73 63 73 69 5f /workqueue/scsi_
backtrace:
[<
000000006f788cd1>] slab_post_alloc_hook+0x88/0x410
[<
00000000cfd1372b>] __kmalloc_track_caller+0x138/0x230
[<
00000000a92ab17b>] kstrdup+0xb0/0x110
[<
0000000037263ab6>] ufshcd_pltfrm_init+0x1a8/0x500
[<
00000000a20a5caa>] ufs_qcom_probe+0x20/0x58
[<
00000000a5e43067>] platform_probe+0x6c/0x118
[<
00000000ef686e3f>] really_probe+0xc4/0x330
[<
000000005b18792c>] __driver_probe_device+0x88/0x118
[<
00000000a5d295e8>] driver_probe_device+0x44/0x158
[<
000000007e83f58d>] __device_attach_driver+0xb4/0x128
[<
000000004bfa4470>] bus_for_each_drv+0x68/0xd0
[<
00000000b89a83bc>] __device_attach+0xec/0x170
[<
00000000ada2beea>] device_initial_probe+0x14/0x20
[<
0000000079921612>] bus_probe_device+0x9c/0xa8
[<
00000000d268bf7c>] deferred_probe_work_func+0x90/0xd0
[<
000000009ef64bfa>] process_one_work+0x29c/0x788
unreferenced object 0xffff66f243fb2c80 (size 128):
comm "kworker/u16:0", pid 7, jiffies
4294893319 (age 94.848s)
hex dump (first 32 bytes):
62 75 73 5f 61 67 67 72 5f 63 6c 6b 00 00 00 00 bus_aggr_clk....
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
With this patch no memory leaks are reported.
Link: https://lore.kernel.org/r/20210914092214.6468-1-srinivas.kandagatla@linaro.org
Fixes:
aa4976130934 ("ufs: Add regulator enable support")
Fixes:
c6e79dacd86f ("ufs: Add clock initialization support")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Can Guo [Thu, 26 Nov 2020 02:01:00 +0000 (18:01 -0800)]
scsi: ufs: Refactor ufshcd_setup_clocks() to remove skip_ref_clk
[ Upstream commit
81309c247a4dcd597cbda5254fd0afdd61b93f14 ]
Remove the param skip_ref_clk from __ufshcd_setup_clocks(), but keep a flag
in struct ufs_clk_info to tell whether a clock can be disabled or not while
the link is active.
Link: https://lore.kernel.org/r/1606356063-38380-2-git-send-email-cang@codeaurora.org
Reviewed-by: Hongwu Su <hongwus@codeaurora.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nuno Sá [Fri, 3 Sep 2021 14:14:19 +0000 (16:14 +0200)]
iio: adis: do not disabe IRQs in 'adis_init()'
[ Upstream commit
b600bd7eb333554518b4dd36b882b2ae58a5149e ]
With commit
ecb010d441088 ("iio: imu: adis: Refactor adis_initial_startup")
we are doing a HW or SW reset to the device which means that we'll get
the default state of the data ready pin (which is enabled). Hence there's
no point in disabling the IRQ in the init function. Moreover, this
function is intended to initialize internal data structures and not
really do anything on the device.
As a result of this, some devices were left with the data ready pin enabled
after probe which was not the desired behavior. Thus, we move the call to
'adis_enable_irq()' to the initial startup function where it makes more
sense for it to be.
Note that for devices that cannot mask/unmask the pin, it makes no sense
to call the function at this point since the IRQ should not have been
yet requested. This will be improved in a follow up change.
Fixes:
ecb010d441088 ("iio: imu: adis: Refactor adis_initial_startup")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210903141423.517028-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Fri, 15 Oct 2021 01:36:09 +0000 (18:36 -0700)]
usb: typec: STUSB160X should select REGMAP_I2C
[ Upstream commit
8ef1e58783b9f55daa4a865c7801dc75cbeb8260 ]
REGMAP_I2C is not a user visible kconfig symbol so driver configs
should not "depend on" it. They should depend on I2C and then
select REGMAP_I2C.
If this worked, it was only because some other driver had set/enabled
REGMAP_I2C.
Fixes:
da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family")
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Amelie Delaunay <amelie.delaunay@st.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20211015013609.7300-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bjorn Andersson [Tue, 5 Oct 2021 03:37:32 +0000 (20:37 -0700)]
soc: qcom: rpmhpd: Make power_on actually enable the domain
[ Upstream commit
e3e56c050ab6e3f1bd811f0787f50709017543e4 ]
The general expectation is that powering on a power-domain should make
the power domain deliver some power, and if a specific performance state
is needed further requests has to be made.
But in contrast with other power-domain implementations (e.g. rpmpd) the
RPMh does not have an interface to enable the power, so the driver has
to vote for a particular corner (performance level) in rpmh_power_on().
But the corner is never initialized, so a typical request to simply
enable the power domain would not actually turn on the hardware. Further
more, when no more clients vote for a performance state (i.e. the
aggregated vote is 0) the power domain would be turned off.
Fix both of these issues by always voting for a corner with non-zero
value, when the power domain is enabled.
The tracking of the lowest non-zero corner is performed to handle the
corner case if there's ever a domain with a non-zero lowest corner, in
which case both rpmh_power_on() and rpmh_rpmhpd_set_performance_state()
would be allowed to use this lowest corner.
Fixes:
279b7e8a62cc ("soc: qcom: rpmhpd: Add RPMh power domain driver")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211005033732.2284447-1-bjorn.andersson@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lee Jones [Tue, 3 Nov 2020 15:28:34 +0000 (15:28 +0000)]
soc: qcom: rpmhpd: Provide some missing struct member descriptions
[ Upstream commit
5d16af6a921f5a4e7038671be5478cba4b7cfe81 ]
Fixes the following W=1 kernel build warning(s):
drivers/soc/qcom/rpmhpd.c:52: warning: Function parameter or member 'parent' not described in 'rpmhpd'
drivers/soc/qcom/rpmhpd.c:52: warning: Function parameter or member 'corner' not described in 'rpmhpd'
drivers/soc/qcom/rpmhpd.c:52: warning: Function parameter or member 'active_corner' not described in 'rpmhpd'
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201103152838.1290217-22-lee.jones@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Richard Fitzgerald [Fri, 15 Oct 2021 13:36:08 +0000 (14:36 +0100)]
ASoC: cs42l42: Defer probe if request_threaded_irq() returns EPROBE_DEFER
[ Upstream commit
0306988789d9d91a18ff70bd2bf165d3ae0ef1dd ]
The driver can run without an interrupt so if devm_request_threaded_irq()
failed, the probe() just carried on. But if this was EPROBE_DEFER the
driver would continue without an interrupt instead of deferring to wait
for the interrupt to become available.
Fixes:
2c394ca79604 ("ASoC: Add support for CS42L42 codec")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211015133619.4698-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Richard Fitzgerald [Fri, 15 Oct 2021 13:36:06 +0000 (14:36 +0100)]
ASoC: cs42l42: Correct some register default values
[ Upstream commit
d591d4b32aa9552af14a0c7c586a2d3fe9ecc6e0 ]
Some registers had wrong default values in cs42l42_reg_defaults[].
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes:
2c394ca79604 ("ASoC: Add support for CS42L42 codec")
Link: https://lore.kernel.org/r/20211015133619.4698-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Olivier Moysan [Mon, 4 Oct 2021 09:03:04 +0000 (11:03 +0200)]
ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15
[ Upstream commit
1a9a9d226f0f0ef5d9bf588ab432e0d679bb1954 ]
Fix SAI2A and SAI2B pin muxings for AV96 board on STM32MP15.
Change sai2a-4 & sai2a-5 to sai2a-2 & sai2a-2.
Change sai2a-4 & sai2a-sleep-5 to sai2b-2 & sai2b-sleep-2
Fixes:
dcf185ca8175 ("ARM: dts: stm32: Add alternate pinmux for SAI2 pins on stm32mp15")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Olivier Moysan [Fri, 24 Sep 2021 16:02:21 +0000 (18:02 +0200)]
ARM: dts: stm32: fix SAI sub nodes register range
[ Upstream commit
6f87a74d31277f0896dcf8c0850ec14bde03c423 ]
The STM32 SAI subblocks registers offsets are in the range
0x0004 (SAIx_CR1) to 0x0020 (SAIx_DR).
The corresponding range length is 0x20 instead of 0x1c.
Change reg property accordingly.
Fixes:
5afd65c3a060 ("ARM: dts: stm32: add sai support on stm32mp157c")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Vasut [Mon, 9 Aug 2021 12:13:24 +0000 (14:13 +0200)]
ARM: dts: stm32: Reduce DHCOR SPI NOR frequency to 50 MHz
[ Upstream commit
2012579b31293d0a8cf2024e9dab66810bf1a15e ]
The SPI NOR is a bit further away from the SoC on DHCOR than on DHCOM,
which causes additional signal delay. At 108 MHz, this delay triggers
a sporadic issue where the first bit of RX data is not received by the
QSPI controller.
There are two options of addressing this problem, either by using the
DLYB block to compensate the extra delay, or by reducing the QSPI bus
clock frequency. The former requires calibration and that is overly
complex, so opt for the second option.
Fixes:
76045bc457104 ("ARM: dts: stm32: Add QSPI NOR on AV96")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Thu, 7 Oct 2021 14:38:47 +0000 (16:38 +0200)]
pinctrl: renesas: checker: Fix off-by-one bug in drive register check
[ Upstream commit
28e7f8ff90583791a034d43b5d2e3fe394142e13 ]
The GENMASK(h, l) macro creates a contiguous bitmask starting at bit
position @l and ending at position @h, inclusive.
This did not trigger any error checks, as the individual register fields
cover at most 3 of the 4 available bits.
Fixes:
08df16e07ad0a1ec ("pinctrl: sh-pfc: checker: Add drive strength register checks")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/8f82d6147fbe3367d4c83962480e97f58d9c96a2.1633615652.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vegard Nossum [Mon, 11 Oct 2021 15:29:41 +0000 (17:29 +0200)]
staging: ks7010: select CRYPTO_HASH/CRYPTO_MICHAEL_MIC
[ Upstream commit
9ca0e55e52c7b2a99f3c2051fc4bd1c63a061519 ]
Fix the following build/link errors:
ld: drivers/staging/ks7010/ks_hostif.o: in function `michael_mic.constprop.0':
ks_hostif.c:(.text+0x95b): undefined reference to `crypto_alloc_shash'
ld: ks_hostif.c:(.text+0x97a): undefined reference to `crypto_shash_setkey'
ld: ks_hostif.c:(.text+0xa13): undefined reference to `crypto_shash_update'
ld: ks_hostif.c:(.text+0xa28): undefined reference to `crypto_shash_update'
ld: ks_hostif.c:(.text+0xa48): undefined reference to `crypto_shash_finup'
ld: ks_hostif.c:(.text+0xa6d): undefined reference to `crypto_destroy_tfm'
Fixes:
8b523f20417d ("staging: ks7010: removed custom Michael MIC implementation.")
Fixes:
3e5bc68fa5968 ("staging: ks7010: Fix build error")
Fixes:
a4961427e7494 ("Revert "staging: ks7010: Fix build error"")
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Link: https://lore.kernel.org/r/20211011152941.12847-1-vegard.nossum@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nikita Yushchenko [Mon, 11 Oct 2021 06:11:18 +0000 (09:11 +0300)]
staging: most: dim2: do not double-register the same device
[ Upstream commit
2ab189164056b05474275bb40caa038a37713061 ]
Commit
723de0f9171e ("staging: most: remove device from interface
structure") moved registration of driver-provided struct device to
the most subsystem.
Dim2 used to register the same struct device to provide a custom device
attribute. This causes double-registration of the same struct device.
Fix that by moving the custom attribute to driver's dev_groups.
This moves attribute to the platform_device object, which is a better
location for platform-specific attributes anyway.
Fixes:
723de0f9171e ("staging: most: remove device from interface structure")
Acked-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Link: https://lore.kernel.org/r/20211011061117.21435-1-nikita.yoush@cogentembedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Tue, 5 Oct 2021 23:57:47 +0000 (16:57 -0700)]
usb: musb: select GENERIC_PHY instead of depending on it
[ Upstream commit
fde1fbedbaed4e76cef4600d775b185f59b9b568 ]
The kconfig symbol GENERIC_PHY says:
All the users of this framework should select this config.
and around 136 out of 138 drivers do so, so change USB_MUSB_MEDIATEK
to do so also.
This (also) fixes a long circular dependency problem for an upcoming
patch.
Fixes:
0990366bab3c ("usb: musb: Add support for MediaTek musb controller")
Cc: Bin Liu <b-liu@ti.com>
Cc: Min Guo <min.guo@mediatek.com>
Cc: Yonglong Wu <yonglong.wu@mediatek.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20211005235747.5588-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Leon Romanovsky [Tue, 12 Oct 2021 07:28:43 +0000 (10:28 +0300)]
RDMA/mlx4: Return missed an error if device doesn't support steering
[ Upstream commit
f4e56ec4452f48b8292dcf0e1c4bdac83506fb8b ]
The error flow fixed in this patch is not possible because all kernel
users of create QP interface check that device supports steering before
set IB_QP_CREATE_NETIF_QP flag.
Fixes:
c1c98501121e ("IB/mlx4: Add support for steerable IB UD QPs")
Link: https://lore.kernel.org/r/91c61f6e60eb0240f8bbc321fda7a1d2986dd03c.1634023677.git.leonro@nvidia.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Wed, 6 Oct 2021 07:32:43 +0000 (10:32 +0300)]
scsi: csiostor: Uninitialized data in csio_ln_vnp_read_cbfn()
[ Upstream commit
f4875d509a0a78ad294a1a538d534b5ba94e685a ]
This variable is just a temporary variable, used to do an endian
conversion. The problem is that the last byte is not initialized. After
the conversion is completely done, the last byte is discarded so it doesn't
cause a problem. But static checkers and the KMSan runtime checker can
detect the uninitialized read and will complain about it.
Link: https://lore.kernel.org/r/20211006073242.GA8404@kili
Fixes:
5036f0a0ecd3 ("[SCSI] csiostor: Fix sparse warnings.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Fri, 8 Oct 2021 06:31:50 +0000 (14:31 +0800)]
power: supply: max17040: fix null-ptr-deref in max17040_probe()
[ Upstream commit
1d422ecfc48ee683ae1ccc9217764f6310c0ffce ]
Add check the return value of devm_regmap_init_i2c(), otherwise
later access may cause null-ptr-deref as follows:
KASAN: null-ptr-deref in range [0x0000000000000360-0x0000000000000367]
RIP: 0010:regmap_read+0x33/0x170
Call Trace:
max17040_probe+0x61b/0xff0 [max17040_battery]
? write_comp_data+0x2a/0x90
? max17040_set_property+0x1d0/0x1d0 [max17040_battery]
? tracer_hardirqs_on+0x33/0x520
? __sanitizer_cov_trace_pc+0x1d/0x50
? _raw_spin_unlock_irqrestore+0x4b/0x60
? trace_hardirqs_on+0x63/0x2d0
? write_comp_data+0x2a/0x90
? __sanitizer_cov_trace_pc+0x1d/0x50
? max17040_set_property+0x1d0/0x1d0 [max17040_battery]
i2c_device_probe+0xa31/0xbe0
Fixes:
6455a8a84bdf ("power: supply: max17040: Use regmap i2c")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jakob Hauser [Fri, 8 Oct 2021 08:32:45 +0000 (10:32 +0200)]
power: supply: rt5033_battery: Change voltage values to µV
[ Upstream commit
bf895295e9a73411889816f1a0c1f4f1a2d9c678 ]
Currently the rt5033_battery driver provides voltage values in mV. It
should be µV as stated in Documentation/power/power_supply_class.rst.
Fixes:
b847dd96e659 ("power: rt5033_battery: Add RT5033 Fuel gauge device driver")
Cc: Beomho Seo <beomho.seo@samsung.com>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Mon, 11 Oct 2021 12:37:39 +0000 (15:37 +0300)]
usb: gadget: hid: fix error code in do_config()
[ Upstream commit
68e7c510fdf4f6167404609da52e1979165649f6 ]
Return an error code if usb_get_function() fails. Don't return success.
Fixes:
4bc8a33f2407 ("usb: gadget: hid: convert to new interface of f_hid")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211011123739.GC15188@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andy Shevchenko [Tue, 5 Oct 2021 13:45:16 +0000 (16:45 +0300)]
serial: 8250_dw: Drop wrong use of ACPI_PTR()
[ Upstream commit
ebabb77a2a115b6c5e68f7364b598310b5f61fb2 ]
ACPI_PTR() is more harmful than helpful. For example, in this case
if CONFIG_ACPI=n, the ID table left unused which is not what we want.
Instead of adding ifdeffery here and there, drop ACPI_PTR().
Fixes:
6a7320c4669f ("serial: 8250_dw: Add ACPI 5.0 support")
Reported-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211005134516.23218-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Lynch [Tue, 28 Sep 2021 12:45:50 +0000 (07:45 -0500)]
powerpc: fix unbalanced node refcount in check_kvm_guest()
[ Upstream commit
56537faf8821e361d739fc5ff58c9c40f54a1d4c ]
When check_kvm_guest() succeeds in looking up a /hypervisor OF node, it
returns without performing a matching put for the lookup, leaving the
node's reference count elevated.
Add the necessary call to of_node_put(), rearranging the code slightly to
avoid repetition or goto.
Fixes:
107c55005fbd ("powerpc/pseries: Add KVM guest doorbell restrictions")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210928124550.132020-1-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Ellerman [Wed, 23 Jun 2021 13:05:14 +0000 (23:05 +1000)]
powerpc: Fix is_kvm_guest() / kvm_para_available()
[ Upstream commit
95839225639ba7c3d8d7231b542728dcf222bf2d ]
Commit
a21d1becaa3f ("powerpc: Reintroduce is_kvm_guest() as a fast-path
check") added is_kvm_guest() and changed kvm_para_available() to use it.
is_kvm_guest() checks a static key, kvm_guest, and that static key is
set in check_kvm_guest().
The problem is check_kvm_guest() is only called on pseries, and even
then only in some configurations. That means is_kvm_guest() always
returns false on all non-pseries and some pseries depending on
configuration. That's a bug.
For PR KVM guests this is noticable because they no longer do live
patching of themselves, which can be detected by the omission of a
message in dmesg such as:
KVM: Live patching for a fast VM worked
To fix it make check_kvm_guest() an initcall, to ensure it's always
called at boot. It needs to be core so that it runs before
kvm_guest_init() which is postcore. To be an initcall it needs to return
int, where 0 means success, so update that.
We still call it manually in pSeries_smp_probe(), because that runs
before init calls are run.
Fixes:
a21d1becaa3f ("powerpc: Reintroduce is_kvm_guest() as a fast-path check")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210623130514.2543232-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
Srikar Dronamraju [Wed, 2 Dec 2020 05:04:55 +0000 (10:34 +0530)]
powerpc: Reintroduce is_kvm_guest() as a fast-path check
[ Upstream commit
a21d1becaa3f17a97b933ffa677b526afc514ec5 ]
Introduce a static branch that would be set during boot if the OS
happens to be a KVM guest. Subsequent checks to see if we are on KVM
will rely on this static branch. This static branch would be used in
vcpu_is_preempted() in a subsequent patch.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201202050456.164005-4-srikar@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Srikar Dronamraju [Wed, 2 Dec 2020 05:04:54 +0000 (10:34 +0530)]
powerpc: Rename is_kvm_guest() to check_kvm_guest()
[ Upstream commit
16520a858a995742c2d2248e86a6026bd0316562 ]
We want to reuse the is_kvm_guest() name in a subsequent patch but
with a new body. Hence rename is_kvm_guest() to check_kvm_guest(). No
additional changes.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: kernel test robot <lkp@intel.com> # int -> bool fix
[mpe: Fold in fix from lkp to use true/false not 0/1]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201202050456.164005-3-srikar@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Srikar Dronamraju [Wed, 2 Dec 2020 05:04:53 +0000 (10:34 +0530)]
powerpc: Refactor is_kvm_guest() declaration to new header
[ Upstream commit
92cc6bf01c7f4c5cfefd1963985c0064687ebeda ]
Only code/declaration movement, in anticipation of doing a KVM-aware
vcpu_is_preempted(). No additional changes.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201202050456.164005-2-srikar@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe Leroy [Wed, 15 Sep 2021 13:34:35 +0000 (15:34 +0200)]
video: fbdev: chipsfb: use memset_io() instead of memset()
[ Upstream commit
f2719b26ae27282c145202ffd656d5ff1fe737cc ]
While investigating a lockup at startup on Powerbook 3400C, it was
identified that the fbdev driver generates alignment exception at
startup:
--- interrupt: 600 at memset+0x60/0xc0
NIP:
c0021414 LR:
c03fc49c CTR:
00007fff
REGS:
ca021c10 TRAP: 0600 Tainted: G W (5.14.2-pmac-00727-g12a41fa69492)
MSR:
00009032 <EE,ME,IR,DR,RI> CR:
44008442 XER:
20000100
DAR:
cab80020 DSISR:
00017c07
GPR00:
00000007 ca021cd0 c14412e0 cab80000 00000000 00100000 cab8001c 00000004
GPR08:
00100000 00007fff 00000000 00000000 84008442 00000000 c0006fb4 00000000
GPR16:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00100000
GPR24:
00000000 81800000 00000320 c15fa400 c14d1878 00000000 c14d1800 c094e19c
NIP [
c0021414] memset+0x60/0xc0
LR [
c03fc49c] chipsfb_pci_init+0x160/0x580
--- interrupt: 600
[
ca021cd0] [
c03fc46c] chipsfb_pci_init+0x130/0x580 (unreliable)
[
ca021d20] [
c03a3a70] pci_device_probe+0xf8/0x1b8
[
ca021d50] [
c043d584] really_probe.part.0+0xac/0x388
[
ca021d70] [
c043d914] __driver_probe_device+0xb4/0x170
[
ca021d90] [
c043da18] driver_probe_device+0x48/0x144
[
ca021dc0] [
c043e318] __driver_attach+0x11c/0x1c4
[
ca021de0] [
c043ad30] bus_for_each_dev+0x88/0xf0
[
ca021e10] [
c043c724] bus_add_driver+0x190/0x22c
[
ca021e40] [
c043ee94] driver_register+0x9c/0x170
[
ca021e60] [
c0006c28] do_one_initcall+0x54/0x1ec
[
ca021ed0] [
c08246e4] kernel_init_freeable+0x1c0/0x270
[
ca021f10] [
c0006fdc] kernel_init+0x28/0x11c
[
ca021f30] [
c0017148] ret_from_kernel_thread+0x14/0x1c
Instruction dump:
7d4601a4 39490777 7d4701a4 39490888 7d4801a4 39490999 7d4901a4 39290aaa
7d2a01a4 4c00012c 4bfffe88 0fe00000 <
4bfffe80>
9421fff0 38210010 48001970
This is due to 'dcbz' instruction being used on non-cached memory.
'dcbz' instruction is used by memset() to zeroize a complete
cacheline at once, and memset() is not expected to be used on non
cached memory.
When performing a 'sparse' check on fbdev driver, it also appears
that the use of memset() is unexpected:
drivers/video/fbdev/chipsfb.c:334:17: warning: incorrect type in argument 1 (different address spaces)
drivers/video/fbdev/chipsfb.c:334:17: expected void *
drivers/video/fbdev/chipsfb.c:334:17: got char [noderef] __iomem *screen_base
drivers/video/fbdev/chipsfb.c:334:15: warning: memset with byte count of 1048576
Use fb_memset() instead of memset(). fb_memset() is defined as
memset_io() for powerpc.
Fixes:
8c8709334cec ("[PATCH] ppc32: Remove CONFIG_PMAC_PBOOK")
Reported-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/884a54f1e5cb774c1d9b4db780209bee5d4f6718.1631712563.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Clément Léger [Mon, 13 Sep 2021 08:26:33 +0000 (10:26 +0200)]
clk: at91: check pmc node status before registering syscore ops
[ Upstream commit
c405f5c15e9f6094f2fa1658e73e56f3058e2122 ]
Currently, at91 pmc driver always register the syscore_ops whatever
the status of the pmc node that has been found. When set as secure
and disabled, the pmc should not be accessed or this will generate
abort exceptions.
To avoid this, add a check on node availability before registering
the syscore operations.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Link: https://lore.kernel.org/r/20210913082633.110168-1-clement.leger@bootlin.com
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Fixes:
b3b02eac33ed ("clk: at91: Add sama5d2 suspend/resume")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dongliang Mu [Sat, 25 Sep 2021 15:14:32 +0000 (23:14 +0800)]
memory: fsl_ifc: fix leak of irq and nand_irq in fsl_ifc_ctrl_probe
[ Upstream commit
4ed2f3545c2e5acfbccd7f85fea5b1a82e9862d7 ]
The error handling code of fsl_ifc_ctrl_probe is problematic. When
fsl_ifc_ctrl_init fails or request_irq of fsl_ifc_ctrl_dev->irq fails,
it forgets to free the irq and nand_irq. Meanwhile, if request_irq of
fsl_ifc_ctrl_dev->nand_irq fails, it will still free nand_irq even if
the request_irq is not successful.
Fix this by refactoring the error handling code.
Fixes:
d2ae2e20fbdd ("driver/memory:Move Freescale IFC driver to a common driver")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Link: https://lore.kernel.org/r/20210925151434.8170-1-mudongliangabcd@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sun, 27 Jun 2021 15:54:31 +0000 (17:54 +0200)]
soc/tegra: Fix an error handling path in tegra_powergate_power_up()
[ Upstream commit
986b5094708e508baa452a23ffe809870934a7df ]
If an error occurs after a successful tegra_powergate_enable_clocks()
call, it must be undone by a tegra_powergate_disable_clocks() call, as
already done in the below and above error handling paths of this function.
Update the 'goto' to branch at the correct place of the error handling
path.
Fixes:
a38045121bf4 ("soc/tegra: pmc: Add generic PM domain support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ranjani Sridharan [Wed, 6 Oct 2021 10:40:41 +0000 (13:40 +0300)]
ASoC: SOF: topology: do not power down primary core during topology removal
[ Upstream commit
ec626334eaffe101df9ed79e161eba95124e64ad ]
When removing the topology components, do not power down
the primary core. Doing so will result in an IPC timeout
when the SOF PCI device runtime suspends.
Fixes:
0dcdf84289fb ("ASoC: SOF: add a "core" parameter to widget loading functions")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211006104041.27183-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andreas Kemnade [Fri, 1 Oct 2021 07:34:15 +0000 (09:34 +0200)]
arm: dts: omap3-gta04a4: accelerometer irq fix
[ Upstream commit
884ea75d79a36faf3731ad9d6b9c29f58697638d ]
Fix typo in pinctrl. It did only work because the bootloader
seems to have initialized it.
Fixes:
ee327111953b ("ARM: dts: omap3-gta04: Define and use bma180 irq pin")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Thu, 30 Sep 2021 08:57:14 +0000 (16:57 +0800)]
driver core: Fix possible memory leak in device_link_add()
[ Upstream commit
df0a18149474c7e6b21f6367fbc6bc8d0f192444 ]
I got memory leak as follows:
unreferenced object 0xffff88801f0b2200 (size 64):
comm "i2c-lis2hh12-21", pid 5455, jiffies
4294944606 (age 15.224s)
hex dump (first 32 bytes):
72 65 67 75 6c 61 74 6f 72 3a 72 65 67 75 6c 61 regulator:regula
74 6f 72 2e 30 2d 2d 69 32 63 3a 31 2d 30 30 31 tor.0--i2c:1-001
backtrace:
[<
00000000bf5b0c3b>] __kmalloc_track_caller+0x19f/0x3a0
[<
0000000050da42d9>] kvasprintf+0xb5/0x150
[<
000000004bbbed13>] kvasprintf_const+0x60/0x190
[<
00000000cdac7480>] kobject_set_name_vargs+0x56/0x150
[<
00000000bf83f8e8>] dev_set_name+0xc0/0x100
[<
00000000cc1cf7e3>] device_link_add+0x6b4/0x17c0
[<
000000009db9faed>] _regulator_get+0x297/0x680
[<
00000000845e7f2b>] _devm_regulator_get+0x5b/0xe0
[<
000000003958ee25>] st_sensors_power_enable+0x71/0x1b0 [st_sensors]
[<
000000005f450f52>] st_accel_i2c_probe+0xd9/0x150 [st_accel_i2c]
[<
00000000b5f2ab33>] i2c_device_probe+0x4d8/0xbe0
[<
0000000070fb977b>] really_probe+0x299/0xc30
[<
0000000088e226ce>] __driver_probe_device+0x357/0x500
[<
00000000c21dda32>] driver_probe_device+0x4e/0x140
[<
000000004e650441>] __device_attach_driver+0x257/0x340
[<
00000000cf1891b8>] bus_for_each_drv+0x166/0x1e0
When device_register() returns an error, the name allocated in dev_set_name()
will be leaked, the put_device() should be used instead of kfree() to give up
the device reference, then the name will be freed in kobject_cleanup() and the
references of consumer and supplier will be decreased in device_link_release_fn().
Fixes:
287905e68dd2 ("driver core: Expose device link details in sysfs")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210930085714.2057460-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>