ALSA: hda/realtek: Add new alc285-hp-amp-init model

commit aa72394667e5cea3547e4c41ddff7ca8c632d764 upstream.

Adds a new "alc285-hp-amp-init" model that can be used to apply the ALC285
HP speaker amplifier initialization fixup to devices that are not already
known by passing "hda_model=alc285-hp-amp-init" to the
snd-sof-intel-hda-common module or "model=alc285-hp-amp-init" to the
snd-hda-intel module, depending on which is being used.

Signed-off-by: Bradley Scott <bscott@teksavvy.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211213162246.506838-1-bscott@teksavvy.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Amp init fixup for HP ZBook 15 G6

commit d296a74b7b59ff9116236c17edb25f26935dbf70 upstream.

HP ZBook 15 G6 (SSID 103c:860f) needs the same speaker amplifier
initialization as used on several other HP laptops using ALC285.

Signed-off-by: Bradley Scott <Bradley.Scott@zebra.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211213154938.503201-1-Bradley.Scott@zebra.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/hdmi: Disable silent stream on GLK

commit b6fd77472dea76b7a2bad3a338ade920152972b8 upstream.

The silent stream stuff recurses back into i915 audio
component .get_power() from the .pin_eld_notify() hook.
On GLK this will deadlock as i915 may already be holding
the relevant modeset locks during .pin_eld_notify() and
the GLK audio vs. CDCLK workaround will try to grab the
same locks from .get_power().

Until someone comes up with a better fix just disable the
silent stream support on GLK.

Cc: stable@vger.kernel.org
Cc: Harsha Priya <harshapriya.n@intel.com>
Cc: Emmanuel Jillela <emmanuel.jillela@intel.com>
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2623
Fixes: 951894cf30f4 ("ALSA: hda/hdmi: Add Intel silent stream support")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211222145350.24342-1-ville.syrjala@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: rawmidi - fix the uninitalized user_pversion

commit 39a8fc4971a00d22536aeb7d446ee4a97810611b upstream.

The user_pversion was uninitialized for the user space file structure
in the open function, because the file private structure use
kmalloc for the allocation.

The kernel ALSA sequencer code clears the file structure, so no additional
fixes are required.

Cc: stable@kernel.org
Cc: broonie@kernel.org
BugLink: https://github.com/alsa-project/alsa-lib/issues/178
Fixes: 09d23174402d ("ALSA: rawmidi: introduce SNDRV_RAWMIDI_IOCTL_USER_PVERSION")
Reported-by: syzbot+88412ee8811832b00dbe@syzkaller.appspotmail.com
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20211218123925.2583847-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: drivers: opl3: Fix incorrect use of vp->state

commit 2dee54b289fbc810669a1b2b8a0887fa1c9a14d7 upstream.

Static analysis with scan-build has found an assignment to vp2 that is
never used. It seems that the check on vp->state > 0 should be actually
on vp2->state instead. Fix this.

This dates back to 2002, I found the offending commit from the git
history git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git,
commit 91e39521bbf6 ("[PATCH] ALSA patch for 2.5.4")

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211212172025.470367-1-colin.i.king@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: jack: Check the return value of kstrdup()

commit c01c1db1dc632edafb0dff32d40daf4f9c1a4e19 upstream.

kstrdup() can return NULL, it is better to check the return value of it.

Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/tencent_094816F3522E0DC704056C789352EBBF0606@qq.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/boot: Move EFI range reservation after cmdline parsing

commit 2f5b3514c33fecad4003ce0f22ca9691492d310b upstream.

The memory reservation in arch/x86/platform/efi/efi.c depends on at
least two command line parameters. Put it back later in the boot process
and move efi_memblock_x86_reserve_range() out of early_memory_reserve().

An attempt to fix this was done in

  8d48bf8206f7 ("x86/boot: Pull up cmdline preparation and early param parsing")

but that caused other troubles so it got reverted.

The bug this is addressing is:

Dan reports that Anjaneya Chagam can no longer use the efi=nosoftreserve
kernel command line parameter to suppress "soft reservation" behavior.

This is due to the fact that the following call-chain happens at boot:

  early_reserve_memory
  |-> efi_memblock_x86_reserve_range
      |-> efi_fake_memmap_early

which does

        if (!efi_soft_reserve_enabled())
                return;

and that would have set EFI_MEM_NO_SOFT_RESERVE after having parsed
"nosoftreserve".

However, parse_early_param() gets called *after* it, leading to the boot
cmdline not being taken into account.

See also https://lore.kernel.org/r/e8dd8993c38702ee6dd73b3c11f158617e665607.camel@intel.com

  [ bp: Turn into a proper patch. ]

Signed-off-by: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211213112757.2612-4-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "x86/boot: Pull up cmdline preparation and early param parsing"

commit fbe6183998546f8896ee0b620ece86deff5a2fd1 upstream.

This reverts commit 8d48bf8206f77aa8687f0e241e901e5197e52423.

It turned out to be a bad idea as it broke supplying mem= cmdline
parameters due to parse_memopt() requiring preparatory work like setting
up the e820 table in e820__memory_setup() in order to be able to exclude
the range specified by mem=.

Pulling that up would've broken Xen PV again, see threads at

  https://lkml.kernel.org/r/20210920120421.29276-1-jgross@suse.com

due to xen_memory_setup() needing the first reservations in
early_reserve_memory() - kernel and initrd - to have happened already.

This could be fixed again by having Xen do those reservations itself...

Long story short, revert this and do a simpler fix in a later patch.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211213112757.2612-3-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel/crash_core: suppress unknown crashkernel parameter warning

[ Upstream commit 71d2bcec2d4d69ff109c497e6611d6c53c8926d4 ]

When booting with crashkernel= on the kernel command line a warning
similar to

    Kernel command line: ro console=ttyS0 crashkernel=256M
    Unknown kernel command line parameters "crashkernel=256M", will be passed to user space.

is printed.

This comes from crashkernel= being parsed independent from the kernel
parameter handling mechanism.  So the code in init/main.c doesn't know
that crashkernel= is a valid kernel parameter and prints this incorrect
warning.

Suppress the warning by adding a dummy early_param handler for
crashkernel=.

Link: https://lkml.kernel.org/r/20211208133443.6867-1-prudo@redhat.com
Fixes: 86d1919a4fb0 ("init: print out unknown kernel parameters")
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86/intel: Remove X86_PLATFORM_DRIVERS_INTEL

[ Upstream commit 4f6c131c3c31b9f68470ebd01320d5403d8719bb ]

While introduction of this menu brings a nice view in the configuration tools,
it brought more issues than solves, i.e. it prevents to locate files in the
intel/ subfolder without touching non-related Kconfig dependencies elsewhere.
Drop X86_PLATFORM_DRIVERS_INTEL altogether.

Note, on x86 it's enabled by default and it's quite unlikely anybody wants to
disable all of the modules in this submenu.

Fixes: 8bd836feb6ca ("platform/x86: intel_skl_int3472: Move to intel/ subfolder")
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211222194941.76054-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

compiler.h: Fix annotation macro misplacement with Clang

[ Upstream commit dcce50e6cc4d86a63dc0a9a6ee7d4f948ccd53a1 ]

When building with Clang and CONFIG_TRACE_BRANCH_PROFILING, there are a
lot of unreachable warnings, like:

  arch/x86/kernel/traps.o: warning: objtool: handle_xfd_event()+0x134: unreachable instruction

Without an input to the inline asm, 'volatile' is ignored for some
reason and Clang feels free to move the reachable() annotation away from
its intended location.

Fix that by re-adding the counter value to the inputs.

Fixes: f1069a8756b9 ("compiler.h: Avoid using inline asm operand modifiers")
Fixes: c199f64ff93c ("instrumentation.h: Avoid using inline asm operand modifiers")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/0417e96909b97a406323409210de7bf13df0b170.1636410380.git.jpoimboe@redhat.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: x86@kernel.org
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

uapi: Fix undefined __always_inline on non-glibc systems

[ Upstream commit cb8747b7d2a9e3d687a19a007575071d4b71cd05 ]

This macro is defined by glibc itself, which makes the issue go unnoticed on
those systems.  On non-glibc systems it causes build failures on several
utilities and libraries, like bpftool and objtool.

Fixes: 1d509f2a6ebc ("x86/insn: Support big endian cross-compiles")
Fixes: 2d7ce0e8a704 ("tools/virtio: more stubs")
Fixes: 3fb321fde22d ("selftests/net: ipv6 flowlabel")
Fixes: 50b3ed57dee9 ("selftests/bpf: test bpf flow dissection")
Fixes: 9cacf81f8161 ("bpf: Remove extra lock_sock for TCP_ZEROCOPY_RECEIVE")
Fixes: a4b2061242ec ("tools include uapi: Grab a copy of linux/in.h")
Fixes: b12d6ec09730 ("bpf: btf: add btf print functionality")
Fixes: c0dd967818a2 ("tools, include: Grab a copy of linux/erspan.h")
Fixes: c4b6014e8bb0 ("tools: Add copy of perf_event.h to tools/include/linux/")

Signed-off-by: Ismael Luceno <ismael@iodev.co.uk>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20211115134647.1921-1-ismael@iodev.co.uk
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9160/1: NOMMU: Reload __secondary_data after PROCINFO_INITFUNC

[ Upstream commit 7202216a6f34d571a22274e729f841256bf8b1ef ]

__secondary_data used to reside in r7 around call to
PROCINFO_INITFUNC. After commit 95731b8ee63e ("ARM: 9059/1: cache-v7:
get rid of mini-stack") r7 is used as a scratch register, so we have
to reload __secondary_data before we setup the stack pointer.

Fixes: 95731b8ee63e ("ARM: 9059/1: cache-v7: get rid of mini-stack")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (lm90) Drop critical attribute support for MAX6654

[ Upstream commit 16ba51b5dcd3f6dde2e51d5ccc86313119dcf889 ]

Tests with a real chip and a closer look into the datasheet show that
MAX6654 does not support CRIT/THERM/OVERTEMP limits, so drop support
of the respective attributes for this chip.

Introduce LM90_HAVE_CRIT flag and use it to instantiate critical limit
attributes to solve the problem.

Cc: Josh Lehan <krellan@google.com>
Fixes: 229d495d8189 ("hwmon: (lm90) Add max6654 support to lm90 driver")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (lm90) Add basic support for TI TMP461

[ Upstream commit f8344f7693a25d9025a59d164450b50c6f5aa3c0 ]

TMP461 is almost identical to TMP451 and was actually detected as TMP451
with the existing lm90 driver if its I2C address is 0x4c. Add support
for it to the lm90 driver. At the same time, improve the chip detection
function to at least try to distinguish between TMP451 and TMP461.

As a side effect, this fixes commit 24333ac26d01 ("hwmon: (tmp401) use
smb word operations instead of 2 smb byte operations"). TMP461 does not
support word operations on temperature registers, which causes bad
temperature readings with the tmp401 driver. The lm90 driver does not
perform word operations on temperature registers and thus does not have
this problem.

Support is listed as basic because TMP461 supports a sensor resolution
of 0.0625 degrees C, while the lm90 driver assumes a resolution of 0.125
degrees C. Also, the TMP461 supports negative temperatures with its
default temperature range, which is not the case for similar chips
supported by the lm90 and the tmp401 drivers. Those limitations will be
addressed with follow-up patches.

Fixes: 24333ac26d01 ("hwmon: (tmp401) use smb word operations instead of 2 smb byte operations")
Reported-by: David T. Wilson <david.wilson@nasa.gov>
Cc: David T. Wilson <david.wilson@nasa.gov>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (lm90) Introduce flag indicating extended temperature support

[ Upstream commit f347e249fcf920ad6974cbd898e2ec0b366a1c34 ]

A flag indicating extended temperature support makes it easier
to add support for additional chips with this functionality.

Cc: David T. Wilson <david.wilson@nasa.gov>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (lm90) Prevent integer overflow/underflow in hysteresis calculations

[ Upstream commit 55840b9eae5367b5d5b29619dc2fb7e4596dba46 ]

Commit b50aa49638c7 ("hwmon: (lm90) Prevent integer underflows of
temperature calculations") addressed a number of underflow situations
when writing temperature limits. However, it missed one situation, seen
when an attempt is made to set the hysteresis value to MAX_LONG and the
critical temperature limit is negative.

Use clamp_val() when setting the hysteresis temperature to ensure that
the provided value can never overflow or underflow.

Fixes: b50aa49638c7 ("hwmon: (lm90) Prevent integer underflows of temperature calculations")
Cc: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (lm90) Fix usage of CONFIG2 register in detect function

[ Upstream commit fce15c45d3fbd9fc1feaaf3210d8e3f8b33dfd3a ]

The detect function had a comment "Make compiler happy" when id did not
read the second configuration register. As it turns out, the code was
checking the contents of this register for manufacturer ID 0xA1 (NXP
Semiconductor/Philips), but never actually read the register. So it
wasn't surprising that the compiler complained, and it indeed had a point.
Fix the code to read the register contents for manufacturer ID 0xa1.

At the same time, the code was reading the register for manufacturer ID
0x41 (Analog Devices), but it was not using the results. In effect it was
just checking if reading the register returned an error. That doesn't
really add much if any value, so stop doing that.

Fixes: f90be42fb383 ("hwmon: (lm90) Refactor reading of config2 register")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: bcm2835: Change init order for gpio hogs

[ Upstream commit 266423e60ea1b953fcc0cd97f3dad85857e434d1 ]

...and gpio-ranges

pinctrl-bcm2835 is a combined pinctrl/gpio driver. Currently the gpio
side is registered first, but this breaks gpio hogs (which are
configured during gpiochip_add_data). Part of the hog initialisation
is a call to pinctrl_gpio_request, and since the pinctrl driver hasn't
yet been registered this results in an -EPROBE_DEFER from which it can
never recover.

Change the initialisation sequence to register the pinctrl driver
first.

This also solves a similar problem with the gpio-ranges property, which
is required in order for released pins to be returned to inputs.

Fixes: 73345a18d464b ("pinctrl: bcm2835: Pass irqchip when adding gpiochip")
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211206092237.4105895-2-phil@raspberrypi.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: elantech - fix stack out of bound access in elantech_change_report_id()

[ Upstream commit 1d72d9f960ccf1052a0630a68c3d358791dbdaaa ]

The array param[] in elantech_change_report_id() must be at least 3
bytes, because elantech_read_reg_params() is calling ps2_command() with
PSMOUSE_CMD_GETINFO, that is going to access 3 bytes from param[], but
it's defined in the stack as an array of 2 bytes, therefore we have a
potential stack out-of-bounds access here, also confirmed by KASAN:

[    6.512374] BUG: KASAN: stack-out-of-bounds in __ps2_command+0x372/0x7e0
[    6.512397] Read of size 1 at addr ffff8881024d77c2 by task kworker/2:1/118

[    6.512416] CPU: 2 PID: 118 Comm: kworker/2:1 Not tainted 5.13.0-22-generic #22+arighi20211110
[    6.512428] Hardware name: LENOVO 20T8000QGE/20T8000QGE, BIOS R1AET32W (1.08 ) 08/14/2020
[    6.512436] Workqueue: events_long serio_handle_event
[    6.512453] Call Trace:
[    6.512462]  show_stack+0x52/0x58
[    6.512474]  dump_stack+0xa1/0xd3
[    6.512487]  print_address_description.constprop.0+0x1d/0x140
[    6.512502]  ? __ps2_command+0x372/0x7e0
[    6.512516]  __kasan_report.cold+0x7d/0x112
[    6.512527]  ? _raw_write_lock_irq+0x20/0xd0
[    6.512539]  ? __ps2_command+0x372/0x7e0
[    6.512552]  kasan_report+0x3c/0x50
[    6.512564]  __asan_load1+0x6a/0x70
[    6.512575]  __ps2_command+0x372/0x7e0
[    6.512589]  ? ps2_drain+0x240/0x240
[    6.512601]  ? dev_printk_emit+0xa2/0xd3
[    6.512612]  ? dev_vprintk_emit+0xc5/0xc5
[    6.512621]  ? __kasan_check_write+0x14/0x20
[    6.512634]  ? mutex_lock+0x8f/0xe0
[    6.512643]  ? __mutex_lock_slowpath+0x20/0x20
[    6.512655]  ps2_command+0x52/0x90
[    6.512670]  elantech_ps2_command+0x4f/0xc0 [psmouse]
[    6.512734]  elantech_change_report_id+0x1e6/0x256 [psmouse]
[    6.512799]  ? elantech_report_trackpoint.constprop.0.cold+0xd/0xd [psmouse]
[    6.512863]  ? ps2_command+0x7f/0x90
[    6.512877]  elantech_query_info.cold+0x6bd/0x9ed [psmouse]
[    6.512943]  ? elantech_setup_ps2+0x460/0x460 [psmouse]
[    6.513005]  ? psmouse_reset+0x69/0xb0 [psmouse]
[    6.513064]  ? psmouse_attr_set_helper+0x2a0/0x2a0 [psmouse]
[    6.513122]  ? phys_pmd_init+0x30e/0x521
[    6.513137]  elantech_init+0x8a/0x200 [psmouse]
[    6.513200]  ? elantech_init_ps2+0xf0/0xf0 [psmouse]
[    6.513249]  ? elantech_query_info+0x440/0x440 [psmouse]
[    6.513296]  ? synaptics_send_cmd+0x60/0x60 [psmouse]
[    6.513342]  ? elantech_query_info+0x440/0x440 [psmouse]
[    6.513388]  ? psmouse_try_protocol+0x11e/0x170 [psmouse]
[    6.513432]  psmouse_extensions+0x65d/0x6e0 [psmouse]
[    6.513476]  ? psmouse_try_protocol+0x170/0x170 [psmouse]
[    6.513519]  ? mutex_unlock+0x22/0x40
[    6.513526]  ? ps2_command+0x7f/0x90
[    6.513536]  ? psmouse_probe+0xa3/0xf0 [psmouse]
[    6.513580]  psmouse_switch_protocol+0x27d/0x2e0 [psmouse]
[    6.513624]  psmouse_connect+0x272/0x530 [psmouse]
[    6.513669]  serio_driver_probe+0x55/0x70
[    6.513679]  really_probe+0x190/0x720
[    6.513689]  driver_probe_device+0x160/0x1f0
[    6.513697]  device_driver_attach+0x119/0x130
[    6.513705]  ? device_driver_attach+0x130/0x130
[    6.513713]  __driver_attach+0xe7/0x1a0
[    6.513720]  ? device_driver_attach+0x130/0x130
[    6.513728]  bus_for_each_dev+0xfb/0x150
[    6.513738]  ? subsys_dev_iter_exit+0x10/0x10
[    6.513748]  ? _raw_write_unlock_bh+0x30/0x30
[    6.513757]  driver_attach+0x2d/0x40
[    6.513764]  serio_handle_event+0x199/0x3d0
[    6.513775]  process_one_work+0x471/0x740
[    6.513785]  worker_thread+0x2d2/0x790
[    6.513794]  ? process_one_work+0x740/0x740
[    6.513802]  kthread+0x1b4/0x1e0
[    6.513809]  ? set_kthread_struct+0x80/0x80
[    6.513816]  ret_from_fork+0x22/0x30

[    6.513832] The buggy address belongs to the page:
[    6.513838] page:00000000bc35e189 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1024d7
[    6.513847] flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff)
[    6.513860] raw: 0017ffffc0000000 dead000000000100 dead000000000122 0000000000000000
[    6.513867] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
[    6.513872] page dumped because: kasan: bad access detected

[    6.513879] addr ffff8881024d77c2 is located in stack of task kworker/2:1/118 at offset 34 in frame:
[    6.513887]  elantech_change_report_id+0x0/0x256 [psmouse]

[    6.513941] this frame has 1 object:
[    6.513947]  [32, 34) 'param'

[    6.513956] Memory state around the buggy address:
[    6.513962]  ffff8881024d7680: f2 f2 f2 f2 f2 00 00 f3 f3 00 00 00 00 00 00 00
[    6.513969]  ffff8881024d7700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    6.513976] >ffff8881024d7780: 00 00 00 00 f1 f1 f1 f1 02 f3 f3 f3 00 00 00 00
[    6.513982]                                            ^
[    6.513988]  ffff8881024d7800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    6.513995]  ffff8881024d7880: 00 f1 f1 f1 f1 03 f2 03 f2 03 f3 f3 f3 00 00 00
[    6.514000] ==================================================================

Define param[] in elantech_change_report_id() as an array of 3 bytes to
prevent the out-of-bounds access in the stack.

Fixes: e4c9062717fe ("Input: elantech - fix protocol errors for some trackpoints in SMBus mode")
BugLink: https://bugs.launchpad.net/bugs/1945590
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Reviewed-by: Wolfram Sang <wsa@kernel.org>
Link: https://lore.kernel.org/r/20211116095559.24395-1-andrea.righi@canonical.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: dwmac-visconti: Fix value of ETHER_CLK_SEL_FREQ_SEL_2P5M

[ Upstream commit 391e5975c0208ce3739587b33eba08be3e473d79 ]

ETHER_CLK_SEL_FREQ_SEL_2P5M is not 0 bit of the register. This is a
value, which is 0. Fix from BIT(0) to 0.

Reported-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Fixes: b38dd98ff8d0 ("net: stmmac: Add Toshiba Visconti SoCs glue driver")
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Link: https://lore.kernel.org/r/20211223073633.101306-1-nobuhiro1.iwamatsu@toshiba.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8152: fix the force speed doesn't work for RTL8156

[ Upstream commit 45bf944e6703d43fe5e285808312acd8a34c1a24 ]

It needs to set mdio force mode. Otherwise, link off always occurs when
setting force speed.

Fixes: 195aae321c82 ("r8152: support new chips")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bridge: fix ioctl old_deviceless bridge argument

[ Upstream commit d95a56207c078e2019cf6659d890ec1e987e8420 ]

Commit 561d8352818f ("bridge: use ndo_siocdevprivate") changed the
source and destination arguments of copy_{to,from}_user in bridge's
old_deviceless() from args[1] to uarg breaking SIOC{G,S}IFBR ioctls.

Commit cbd7ad29a507 ("net: bridge: fix ioctl old_deviceless bridge
argument") fixed only BRCTL_{ADD,DEL}_BRIDGES commands leaving
BRCTL_GET_BRIDGES one untouched.

The fixes BRCTL_GET_BRIDGES as well and has been tested with busybox's
brctl.

Example of broken brctl:
$ brctl show
bridge name     bridge id               STP enabled     interfaces
brctl: can't get bridge name for index 0: No such device or address

Example of fixed brctl:
$ brctl show
bridge name     bridge id               STP enabled     interfaces
br0             8000.000000000000       no

Fixes: 561d8352818f ("bridge: use ndo_siocdevprivate")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/all/20211223153139.7661-2-repk@triplefau.lt/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bridge: Use array_size() helper in copy_to_user()

[ Upstream commit 865bfb2affa8eff5182b29aa90803a2df4409834 ]

Use array_size() helper instead of the open-coded version in
copy_to_user(). These sorts of multiplication factors need
to be wrapped in array_size().

Link: https://github.com/KSPP/linux/issues/160
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: ptp: fix potentially overflowing expression

[ Upstream commit eccffcf4657ab9a148faaa0eb354d2a091caf552 ]

Convert the u32 variable to type u64 in a context where expression of
type u64 is required to avoid potential overflow.

Fixes: e9e3720002f6 ("net: stmmac: ptp: update tas basetime after ptp adjust")
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Link: https://lore.kernel.org/r/20211223073928.37371-1-xiaoliang.yang_1@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

veth: ensure skb entering GRO are not cloned.

[ Upstream commit 9695b7de5b4760ed22132aca919570c0190cb0ce ]

After commit d3256efd8e8b ("veth: allow enabling NAPI even without XDP"),
if GRO is enabled on a veth device and TSO is disabled on the peer
device, TCP skbs will go through the NAPI callback. If there is no XDP
program attached, the veth code does not perform any share check, and
shared/cloned skbs could enter the GRO engine.

Ignat reported a BUG triggered later-on due to the above condition:

[   53.970529][    C1] kernel BUG at net/core/skbuff.c:3574!
[   53.981755][    C1] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
[   53.982634][    C1] CPU: 1 PID: 19 Comm: ksoftirqd/1 Not tainted 5.16.0-rc5+ #25
[   53.982634][    C1] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
[   53.982634][    C1] RIP: 0010:skb_shift+0x13ef/0x23b0
[   53.982634][    C1] Code: ea 03 0f b6 04 02 48 89 fa 83 e2 07 38 d0
7f 08 84 c0 0f 85 41 0c 00 00 41 80 7f 02 00 4d 8d b5 d0 00 00 00 0f
85 74 f5 ff ff <0f> 0b 4d 8d 77 20 be 04 00 00 00 4c 89 44 24 78 4c 89
f7 4c 89 8c
[   53.982634][    C1] RSP: 0018:ffff8881008f7008 EFLAGS: 00010246
[   53.982634][    C1] RAX: 0000000000000000 RBX: ffff8881180b4c80 RCX: 0000000000000000
[   53.982634][    C1] RDX: 0000000000000002 RSI: ffff8881180b4d3c RDI: ffff88810bc9cac2
[   53.982634][    C1] RBP: ffff8881008f70b8 R08: ffff8881180b4cf4 R09: ffff8881180b4cf0
[   53.982634][    C1] R10: ffffed1022999e5c R11: 0000000000000002 R12: 0000000000000590
[   53.982634][    C1] R13: ffff88810f940c80 R14: ffff88810f940d50 R15: ffff88810bc9cac0
[   53.982634][    C1] FS:  0000000000000000(0000) GS:ffff888235880000(0000) knlGS:0000000000000000
[   53.982634][    C1] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   53.982634][    C1] CR2: 00007ff5f9b86680 CR3: 0000000108ce8004 CR4: 0000000000170ee0
[   53.982634][    C1] Call Trace:
[   53.982634][    C1]  <TASK>
[   53.982634][    C1]  tcp_sacktag_walk+0xaba/0x18e0
[   53.982634][    C1]  tcp_sacktag_write_queue+0xe7b/0x3460
[   53.982634][    C1]  tcp_ack+0x2666/0x54b0
[   53.982634][    C1]  tcp_rcv_established+0x4d9/0x20f0
[   53.982634][    C1]  tcp_v4_do_rcv+0x551/0x810
[   53.982634][    C1]  tcp_v4_rcv+0x22ed/0x2ed0
[   53.982634][    C1]  ip_protocol_deliver_rcu+0x96/0xaf0
[   53.982634][    C1]  ip_local_deliver_finish+0x1e0/0x2f0
[   53.982634][    C1]  ip_sublist_rcv_finish+0x211/0x440
[   53.982634][    C1]  ip_list_rcv_finish.constprop.0+0x424/0x660
[   53.982634][    C1]  ip_list_rcv+0x2c8/0x410
[   53.982634][    C1]  __netif_receive_skb_list_core+0x65c/0x910
[   53.982634][    C1]  netif_receive_skb_list_internal+0x5f9/0xcb0
[   53.982634][    C1]  napi_complete_done+0x188/0x6e0
[   53.982634][    C1]  gro_cell_poll+0x10c/0x1d0
[   53.982634][    C1]  __napi_poll+0xa1/0x530
[   53.982634][    C1]  net_rx_action+0x567/0x1270
[   53.982634][    C1]  __do_softirq+0x28a/0x9ba
[   53.982634][    C1]  run_ksoftirqd+0x32/0x60
[   53.982634][    C1]  smpboot_thread_fn+0x559/0x8c0
[   53.982634][    C1]  kthread+0x3b9/0x490
[   53.982634][    C1]  ret_from_fork+0x22/0x30
[   53.982634][    C1]  </TASK>

Address the issue by skipping the GRO stage for shared or cloned skbs.
To reduce the chance of OoO, try to unclone the skbs before giving up.

v1 -> v2:
 - use avoid skb_copy and fallback to netif_receive_skb  - Eric

Reported-by: Ignat Korchagin <ignat@cloudflare.com>
Fixes: d3256efd8e8b ("veth: allow enabling NAPI even without XDP")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/b5f61c5602aab01bac8d711d8d1bfab0a4817db7.1640197544.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: zero iocb->ki_pos for stream file types

[ Upstream commit 7b9762a5e8837b92a027d58d396a9d27f6440c36 ]

io_uring supports using offset == -1 for using the current file position,
and we read that in as part of read/write command setup. For the non-iter
read/write types we pass in NULL for the position pointer, but for the
iter types we should not be passing any anything but 0 for the position
for a stream.

Clear kiocb->ki_pos if the file is a stream, don't leave it as -1. If we
do, then the request will error with -ESPIPE.

Fixes: ba04291eb66e ("io_uring: allow use of offset == -1 to mean file position")
Link: https://github.com/axboe/liburing/discussions/501
Reported-by: Samuel Williams <samuel.williams@oriontransfer.co.nz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

asix: fix wrong return value in asix_check_host_enable()

[ Upstream commit d1652b70d07cc3eed96210c876c4879e1655f20e ]

If asix_read_cmd() returns 0 on 30th interation, 0 will be returned from
asix_check_host_enable(), which is logically wrong. Fix it by returning
-ETIMEDOUT explicitly if we have exceeded 30 iterations

Also, replaced 30 with #define as suggested by Andrew

Fixes: a786e3195d6a ("net: asix: fix uninit value bugs")
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/ecd3470ce6c2d5697ac635d0d3b14a47defb4acb.1640117288.git.paskripkin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

asix: fix uninit-value in asix_mdio_read()

[ Upstream commit 8035b1a2a37a29d8c717ef84fca8fe7278bc9f03 ]

asix_read_cmd() may read less than sizeof(smsr) bytes and in this case
smsr will be uninitialized.

Fail log:
BUG: KMSAN: uninit-value in asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline]
BUG: KMSAN: uninit-value in asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] drivers/net/usb/asix_common.c:497
BUG: KMSAN: uninit-value in asix_mdio_read+0x3c1/0xb00 drivers/net/usb/asix_common.c:497 drivers/net/usb/asix_common.c:497
 asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline]
 asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] drivers/net/usb/asix_common.c:497
 asix_mdio_read+0x3c1/0xb00 drivers/net/usb/asix_common.c:497 drivers/net/usb/asix_common.c:497

Fixes: d9fe64e51114 ("net: asix: Add in_pm parameter")
Reported-and-tested-by: syzbot+f44badb06036334e867a@syzkaller.appspotmail.com
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/8966e3b514edf39857dd93603fc79ec02e000a75.1640117288.git.paskripkin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sfc: falcon: Check null pointer of rx_queue->page_ring

[ Upstream commit 9b8bdd1eb5890aeeab7391dddcf8bd51f7b07216 ]

Because of the possible failure of the kcalloc, it should be better to
set rx_queue->page_ptr_mask to 0 when it happens in order to maintain
the consistency.

Fixes: 5a6681e22c14 ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20211220140344.978408-1-jiasheng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sfc: Check null pointer of rx_queue->page_ring

[ Upstream commit bdf1b5c3884f6a0dc91b0dbdb8c3b7d205f449e0 ]

Because of the possible failure of the kcalloc, it should be better to
set rx_queue->page_ptr_mask to 0 when it happens in order to maintain
the consistency.

Fixes: 5a6681e22c14 ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20211220135603.954944-1-jiasheng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ks8851: Check for error irq

[ Upstream commit 99d7fbb5cedf598f67e8be106d6c7b8d91366aef ]

Because platform_get_irq() could fail and return error irq.
Therefore, it might be better to check it if order to avoid the use of
error irq.

Fixes: 797047f875b5 ("net: ks8851: Implement Parallel bus operations")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: net: smc911x: Check for error irq

[ Upstream commit cb93b3e11d405f20a405a07482d01147ef4934a3 ]

Because platform_get_irq() could fail and return error irq.
Therefore, it might be better to check it if order to avoid the use of
error irq.

Fixes: ae150435b59e ("smsc: Move the SMC (SMSC) drivers")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fjes: Check for error irq

[ Upstream commit db6d6afe382de5a65d6ccf51253ab48b8e8336c3 ]

I find that platform_get_irq() will not always succeed.
It will return error irq in case of the failure.
Therefore, it might be better to check it if order to avoid the use of
error irq.

Fixes: 658d439b2292 ("fjes: Introduce FUJITSU Extended Socket Network Device driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bonding: fix ad_actor_system option setting to default

[ Upstream commit 1c15b05baea71a5ff98235783e3e4ad227760876 ]

When 802.3ad bond mode is configured the ad_actor_system option is set to
"00:00:00:00:00:00". But when trying to set the all-zeroes MAC as actors'
system address it was failing with EINVAL.

An all-zeroes ethernet address is valid, only multicast addresses are not
valid values.

Fixes: 171a42c38c6e ("bonding: add netlink support for sys prio, actor sys mac, and port key")
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20211221111345.2462-1-ffmancera@riseup.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: virtio: remove timeout

[ Upstream commit 3e4d9a485029aa9e172dab5420abe775fd86f8e8 ]

The driver imposes an arbitrary one second timeout on virtio requests,
but the specification doesn't prevent the virtio device from taking
longer to process requests, so remove this timeout to support all
systems and device implementations.

Fixes: 3a29355a22c0275fe86 ("gpio: Add virtio-gpio driver")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipmi: Fix UAF when uninstall ipmi_si and ipmi_msghandler module

[ Upstream commit ffb76a86f8096a8206be03b14adda6092e18e275 ]

Hi,

When testing install and uninstall of ipmi_si.ko and ipmi_msghandler.ko,
the system crashed.

The log as follows:
[  141.087026] BUG: unable to handle kernel paging request at ffffffffc09b3a5a
[  141.087241] PGD 8fe4c0d067 P4D 8fe4c0d067 PUD 8fe4c0f067 PMD 103ad89067 PTE 0
[  141.087464] Oops: 0010 [#1] SMP NOPTI
[  141.087580] CPU: 67 PID: 668 Comm: kworker/67:1 Kdump: loaded Not tainted 4.18.0.x86_64 #47
[  141.088009] Workqueue: events 0xffffffffc09b3a40
[  141.088009] RIP: 0010:0xffffffffc09b3a5a
[  141.088009] Code: Bad RIP value.
[  141.088009] RSP: 0018:ffffb9094e2c3e88 EFLAGS: 00010246
[  141.088009] RAX: 0000000000000000 RBX: ffff9abfdb1f04a0 RCX: 0000000000000000
[  141.088009] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246
[  141.088009] RBP: 0000000000000000 R08: ffff9abfffee3cb8 R09: 00000000000002e1
[  141.088009] R10: ffffb9094cb73d90 R11: 00000000000f4240 R12: ffff9abfffee8700
[  141.088009] R13: 0000000000000000 R14: ffff9abfdb1f04a0 R15: ffff9abfdb1f04a8
[  141.088009] FS:  0000000000000000(0000) GS:ffff9abfffec0000(0000) knlGS:0000000000000000
[  141.088009] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  141.088009] CR2: ffffffffc09b3a30 CR3: 0000008fe4c0a001 CR4: 00000000007606e0
[  141.088009] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  141.088009] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  141.088009] PKRU: 55555554
[  141.088009] Call Trace:
[  141.088009]  ? process_one_work+0x195/0x390
[  141.088009]  ? worker_thread+0x30/0x390
[  141.088009]  ? process_one_work+0x390/0x390
[  141.088009]  ? kthread+0x10d/0x130
[  141.088009]  ? kthread_flush_work_fn+0x10/0x10
[  141.088009]  ? ret_from_fork+0x35/0x40] BUG: unable to handle kernel paging request at ffffffffc0b28a5a
[  200.223240] PGD 97fe00d067 P4D 97fe00d067 PUD 97fe00f067 PMD a580cbf067 PTE 0
[  200.223464] Oops: 0010 [#1] SMP NOPTI
[  200.223579] CPU: 63 PID: 664 Comm: kworker/63:1 Kdump: loaded Not tainted 4.18.0.x86_64 #46
[  200.224008] Workqueue: events 0xffffffffc0b28a40
[  200.224008] RIP: 0010:0xffffffffc0b28a5a
[  200.224008] Code: Bad RIP value.
[  200.224008] RSP: 0018:ffffbf3c8e2a3e88 EFLAGS: 00010246
[  200.224008] RAX: 0000000000000000 RBX: ffffa0799ad6bca0 RCX: 0000000000000000
[  200.224008] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246
[  200.224008] RBP: 0000000000000000 R08: ffff9fe43fde3cb8 R09: 00000000000000d5
[  200.224008] R10: ffffbf3c8cb53d90 R11: 00000000000f4240 R12: ffff9fe43fde8700
[  200.224008] R13: 0000000000000000 R14: ffffa0799ad6bca0 R15: ffffa0799ad6bca8
[  200.224008] FS:  0000000000000000(0000) GS:ffff9fe43fdc0000(0000) knlGS:0000000000000000
[  200.224008] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  200.224008] CR2: ffffffffc0b28a30 CR3: 00000097fe00a002 CR4: 00000000007606e0
[  200.224008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  200.224008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  200.224008] PKRU: 55555554
[  200.224008] Call Trace:
[  200.224008]  ? process_one_work+0x195/0x390
[  200.224008]  ? worker_thread+0x30/0x390
[  200.224008]  ? process_one_work+0x390/0x390
[  200.224008]  ? kthread+0x10d/0x130
[  200.224008]  ? kthread_flush_work_fn+0x10/0x10
[  200.224008]  ? ret_from_fork+0x35/0x40
[  200.224008] kernel fault(0x1) notification starting on CPU 63
[  200.224008] kernel fault(0x1) notification finished on CPU 63
[  200.224008] CR2: ffffffffc0b28a5a
[  200.224008] ---[ end trace c82a412d93f57412 ]---

The reason is as follows:
T1: rmmod ipmi_si.
    ->ipmi_unregister_smi()
        -> ipmi_bmc_unregister()
            -> __ipmi_bmc_unregister()
                -> kref_put(&bmc->usecount, cleanup_bmc_device);
                    -> schedule_work(&bmc->remove_work);

T2: rmmod ipmi_msghandler.
    ipmi_msghander module uninstalled, and the module space
    will be freed.

T3: bmc->remove_work doing cleanup the bmc resource.
    -> cleanup_bmc_work()
        -> platform_device_unregister(&bmc->pdev);
            -> platform_device_del(pdev);
                -> device_del(&pdev->dev);
                    -> kobject_uevent(&dev->kobj, KOBJ_REMOVE);
                        -> kobject_uevent_env()
                            -> dev_uevent()
                                -> if (dev->type && dev->type->name)

   'dev->type'(bmc_device_type) pointer space has freed when uninstall
    ipmi_msghander module, 'dev->type->name' cause the system crash.

drivers/char/ipmi/ipmi_msghandler.c:
2820 static const struct device_type bmc_device_type = {
2821         .groups         = bmc_dev_attr_groups,
2822 };

Steps to reproduce:
Add a time delay in cleanup_bmc_work() function,
and uninstall ipmi_si and ipmi_msghandler module.

2910 static void cleanup_bmc_work(struct work_struct *work)
2911 {
2912         struct bmc_device *bmc = container_of(work, struct bmc_device,
2913                                               remove_work);
2914         int id = bmc->pdev.id; /* Unregister overwrites id */
2915
2916         msleep(3000);   <---
2917         platform_device_unregister(&bmc->pdev);
2918         ida_simple_remove(&ipmi_bmc_ida, id);
2919 }

Use 'remove_work_wq' instead of 'system_wq' to solve this issues.

Fixes: b2cfd8ab4add ("ipmi: Rework device id and guid handling to catch changing BMCs")
Signed-off-by: Wu Bo <wubo40@huawei.com>
Message-Id: <1640070034-56671-1-git-send-email-wubo40@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igb: fix deadlock caused by taking RTNL in RPM resume path

[ Upstream commit ac8c58f5b535d6272324e2b8b4a0454781c9147e ]

Recent net core changes caused an issue with few Intel drivers
(reportedly igb), where taking RTNL in RPM resume path results in a
deadlock. See [0] for a bug report. I don't think the core changes
are wrong, but taking RTNL in RPM resume path isn't needed.
The Intel drivers are the only ones doing this. See [1] for a
discussion on the issue. Following patch changes the RPM resume path
to not take RTNL.

[0] https://bugzilla.kernel.org/show_bug.cgi?id=215129
[1] https://lore.kernel.org/netdev/20211125074949.5f897431@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/t/

Fixes: bd869245a3dc ("net: core: try to runtime-resume detached device in __dev_open")
Fixes: f32a21376573 ("ethtool: runtime-resume netdev parent before ethtool ioctl ops")
Tested-by: Martin Stolpe <martin.stolpe@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20211220201844.2714498-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: skip virtio_net_hdr_set_proto if protocol already set

[ Upstream commit 1ed1d592113959f00cc552c3b9f47ca2d157768f ]

virtio_net_hdr_set_proto infers skb->protocol from the virtio_net_hdr
gso_type, to avoid packets getting dropped for lack of a proto type.

Its protocol choice is a guess, especially in the case of UFO, where
the single VIRTIO_NET_HDR_GSO_UDP label covers both UFOv4 and UFOv6.

Skip this best effort if the field is already initialized. Whether
explicitly from userspace, or implicitly based on an earlier call to
dev_parse_header_protocol (which is more robust, but was introduced
after this patch).

Fixes: 9d2f67e43b73 ("net/packet: fix packet drop as of virtio gso")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211220145027.2784293-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: accept UFOv6 packages in virtio_net_hdr_to_skb

[ Upstream commit 7e5cced9ca84df52d874aca6b632f930b3dc5bc6 ]

Skb with skb->protocol 0 at the time of virtio_net_hdr_to_skb may have
a protocol inferred from virtio_net_hdr with virtio_net_hdr_set_proto.

Unlike TCP, UDP does not have separate types for IPv4 and IPv6. Type
VIRTIO_NET_HDR_GSO_UDP is guessed to be IPv4/UDP. As of the below
commit, UFOv6 packets are dropped due to not matching the protocol as
obtained from dev_parse_header_protocol.

Invert the test to take that L2 protocol field as starting point and
pass both UFOv4 and UFOv6 for VIRTIO_NET_HDR_GSO_UDP.

Fixes: 924a9bc362a5 ("net: check if protocol extracted by virtio_net_hdr_set_proto is correct")
Link: https://lore.kernel.org/netdev/CABcq3pG9GRCYqFDBAJ48H1vpnnX=41u+MhQnayF1ztLH4WX0Fw@mail.gmail.com/
Reported-by: Andrew Melnichenko <andrew@daynix.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211220144901.2784030-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

inet: fully convert sk->sk_rx_dst to RCU rules

[ Upstream commit 8f905c0e7354ef261360fb7535ea079b1082c105 ]

syzbot reported various issues around early demux,
one being included in this changelog [1]

sk->sk_rx_dst is using RCU protection without clearly
documenting it.

And following sequences in tcp_v4_do_rcv()/tcp_v6_do_rcv()
are not following standard RCU rules.

[a]    dst_release(dst);
[b]    sk->sk_rx_dst = NULL;

They look wrong because a delete operation of RCU protected
pointer is supposed to clear the pointer before
the call_rcu()/synchronize_rcu() guarding actual memory freeing.

In some cases indeed, dst could be freed before [b] is done.

We could cheat by clearing sk_rx_dst before calling
dst_release(), but this seems the right time to stick
to standard RCU annotations and debugging facilities.

[1]
BUG: KASAN: use-after-free in dst_check include/net/dst.h:470 [inline]
BUG: KASAN: use-after-free in tcp_v4_early_demux+0x95b/0x960 net/ipv4/tcp_ipv4.c:1792
Read of size 2 at addr ffff88807f1cb73a by task syz-executor.5/9204

CPU: 0 PID: 9204 Comm: syz-executor.5 Not tainted 5.16.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 print_address_description.constprop.0.cold+0x8d/0x320 mm/kasan/report.c:247
 __kasan_report mm/kasan/report.c:433 [inline]
 kasan_report.cold+0x83/0xdf mm/kasan/report.c:450
 dst_check include/net/dst.h:470 [inline]
 tcp_v4_early_demux+0x95b/0x960 net/ipv4/tcp_ipv4.c:1792
 ip_rcv_finish_core.constprop.0+0x15de/0x1e80 net/ipv4/ip_input.c:340
 ip_list_rcv_finish.constprop.0+0x1b2/0x6e0 net/ipv4/ip_input.c:583
 ip_sublist_rcv net/ipv4/ip_input.c:609 [inline]
 ip_list_rcv+0x34e/0x490 net/ipv4/ip_input.c:644
 __netif_receive_skb_list_ptype net/core/dev.c:5508 [inline]
 __netif_receive_skb_list_core+0x549/0x8e0 net/core/dev.c:5556
 __netif_receive_skb_list net/core/dev.c:5608 [inline]
 netif_receive_skb_list_internal+0x75e/0xd80 net/core/dev.c:5699
 gro_normal_list net/core/dev.c:5853 [inline]
 gro_normal_list net/core/dev.c:5849 [inline]
 napi_complete_done+0x1f1/0x880 net/core/dev.c:6590
 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline]
 virtnet_poll+0xca2/0x11b0 drivers/net/virtio_net.c:1557
 __napi_poll+0xaf/0x440 net/core/dev.c:7023
 napi_poll net/core/dev.c:7090 [inline]
 net_rx_action+0x801/0xb40 net/core/dev.c:7177
 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558
 invoke_softirq kernel/softirq.c:432 [inline]
 __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637
 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649
 common_interrupt+0x52/0xc0 arch/x86/kernel/irq.c:240
 asm_common_interrupt+0x1e/0x40 arch/x86/include/asm/idtentry.h:629
RIP: 0033:0x7f5e972bfd57
Code: 39 d1 73 14 0f 1f 80 00 00 00 00 48 8b 50 f8 48 83 e8 08 48 39 ca 77 f3 48 39 c3 73 3e 48 89 13 48 8b 50 f8 48 89 38 49 8b 0e <48> 8b 3e 48 83 c3 08 48 83 c6 08 eb bc 48 39 d1 72 9e 48 39 d0 73
RSP: 002b:00007fff8a413210 EFLAGS: 00000283
RAX: 00007f5e97108990 RBX: 00007f5e97108338 RCX: ffffffff81d3aa45
RDX: ffffffff81d3aa45 RSI: 00007f5e97108340 RDI: ffffffff81d3aa45
RBP: 00007f5e97107eb8 R08: 00007f5e97108d88 R09: 0000000093c2e8d9
R10: 0000000000000000 R11: 0000000000000000 R12: 00007f5e97107eb0
R13: 00007f5e97108338 R14: 00007f5e97107ea8 R15: 0000000000000019
 </TASK>

Allocated by task 13:
 kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38
 kasan_set_track mm/kasan/common.c:46 [inline]
 set_alloc_info mm/kasan/common.c:434 [inline]
 __kasan_slab_alloc+0x90/0xc0 mm/kasan/common.c:467
 kasan_slab_alloc include/linux/kasan.h:259 [inline]
 slab_post_alloc_hook mm/slab.h:519 [inline]
 slab_alloc_node mm/slub.c:3234 [inline]
 slab_alloc mm/slub.c:3242 [inline]
 kmem_cache_alloc+0x202/0x3a0 mm/slub.c:3247
 dst_alloc+0x146/0x1f0 net/core/dst.c:92
 rt_dst_alloc+0x73/0x430 net/ipv4/route.c:1613
 ip_route_input_slow+0x1817/0x3a20 net/ipv4/route.c:2340
 ip_route_input_rcu net/ipv4/route.c:2470 [inline]
 ip_route_input_noref+0x116/0x2a0 net/ipv4/route.c:2415
 ip_rcv_finish_core.constprop.0+0x288/0x1e80 net/ipv4/ip_input.c:354
 ip_list_rcv_finish.constprop.0+0x1b2/0x6e0 net/ipv4/ip_input.c:583
 ip_sublist_rcv net/ipv4/ip_input.c:609 [inline]
 ip_list_rcv+0x34e/0x490 net/ipv4/ip_input.c:644
 __netif_receive_skb_list_ptype net/core/dev.c:5508 [inline]
 __netif_receive_skb_list_core+0x549/0x8e0 net/core/dev.c:5556
 __netif_receive_skb_list net/core/dev.c:5608 [inline]
 netif_receive_skb_list_internal+0x75e/0xd80 net/core/dev.c:5699
 gro_normal_list net/core/dev.c:5853 [inline]
 gro_normal_list net/core/dev.c:5849 [inline]
 napi_complete_done+0x1f1/0x880 net/core/dev.c:6590
 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline]
 virtnet_poll+0xca2/0x11b0 drivers/net/virtio_net.c:1557
 __napi_poll+0xaf/0x440 net/core/dev.c:7023
 napi_poll net/core/dev.c:7090 [inline]
 net_rx_action+0x801/0xb40 net/core/dev.c:7177
 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558

Freed by task 13:
 kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38
 kasan_set_track+0x21/0x30 mm/kasan/common.c:46
 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370
 ____kasan_slab_free mm/kasan/common.c:366 [inline]
 ____kasan_slab_free mm/kasan/common.c:328 [inline]
 __kasan_slab_free+0xff/0x130 mm/kasan/common.c:374
 kasan_slab_free include/linux/kasan.h:235 [inline]
 slab_free_hook mm/slub.c:1723 [inline]
 slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1749
 slab_free mm/slub.c:3513 [inline]
 kmem_cache_free+0xbd/0x5d0 mm/slub.c:3530
 dst_destroy+0x2d6/0x3f0 net/core/dst.c:127
 rcu_do_batch kernel/rcu/tree.c:2506 [inline]
 rcu_core+0x7ab/0x1470 kernel/rcu/tree.c:2741
 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558

Last potentially related work creation:
 kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38
 __kasan_record_aux_stack+0xf5/0x120 mm/kasan/generic.c:348
 __call_rcu kernel/rcu/tree.c:2985 [inline]
 call_rcu+0xb1/0x740 kernel/rcu/tree.c:3065
 dst_release net/core/dst.c:177 [inline]
 dst_release+0x79/0xe0 net/core/dst.c:167
 tcp_v4_do_rcv+0x612/0x8d0 net/ipv4/tcp_ipv4.c:1712
 sk_backlog_rcv include/net/sock.h:1030 [inline]
 __release_sock+0x134/0x3b0 net/core/sock.c:2768
 release_sock+0x54/0x1b0 net/core/sock.c:3300
 tcp_sendmsg+0x36/0x40 net/ipv4/tcp.c:1441
 inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:819
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:724
 sock_write_iter+0x289/0x3c0 net/socket.c:1057
 call_write_iter include/linux/fs.h:2162 [inline]
 new_sync_write+0x429/0x660 fs/read_write.c:503
 vfs_write+0x7cd/0xae0 fs/read_write.c:590
 ksys_write+0x1ee/0x250 fs/read_write.c:643
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

The buggy address belongs to the object at ffff88807f1cb700
 which belongs to the cache ip_dst_cache of size 176
The buggy address is located 58 bytes inside of
 176-byte region [ffff88807f1cb700, ffff88807f1cb7b0)
The buggy address belongs to the page:
page:ffffea0001fc72c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7f1cb
flags: 0xfff00000000200(slab|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000000200 dead000000000100 dead000000000122 ffff8881413bb780
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x112a20(GFP_ATOMIC|__GFP_NOWARN|__GFP_NORETRY|__GFP_HARDWALL), pid 5, ts 108466983062, free_ts 108048976062
 prep_new_page mm/page_alloc.c:2418 [inline]
 get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4149
 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5369
 alloc_pages+0x1a7/0x300 mm/mempolicy.c:2191
 alloc_slab_page mm/slub.c:1793 [inline]
 allocate_slab mm/slub.c:1930 [inline]
 new_slab+0x32d/0x4a0 mm/slub.c:1993
 ___slab_alloc+0x918/0xfe0 mm/slub.c:3022
 __slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3109
 slab_alloc_node mm/slub.c:3200 [inline]
 slab_alloc mm/slub.c:3242 [inline]
 kmem_cache_alloc+0x35c/0x3a0 mm/slub.c:3247
 dst_alloc+0x146/0x1f0 net/core/dst.c:92
 rt_dst_alloc+0x73/0x430 net/ipv4/route.c:1613
 __mkroute_output net/ipv4/route.c:2564 [inline]
 ip_route_output_key_hash_rcu+0x921/0x2d00 net/ipv4/route.c:2791
 ip_route_output_key_hash+0x18b/0x300 net/ipv4/route.c:2619
 __ip_route_output_key include/net/route.h:126 [inline]
 ip_route_output_flow+0x23/0x150 net/ipv4/route.c:2850
 ip_route_output_key include/net/route.h:142 [inline]
 geneve_get_v4_rt+0x3a6/0x830 drivers/net/geneve.c:809
 geneve_xmit_skb drivers/net/geneve.c:899 [inline]
 geneve_xmit+0xc4a/0x3540 drivers/net/geneve.c:1082
 __netdev_start_xmit include/linux/netdevice.h:4994 [inline]
 netdev_start_xmit include/linux/netdevice.h:5008 [inline]
 xmit_one net/core/dev.c:3590 [inline]
 dev_hard_start_xmit+0x1eb/0x920 net/core/dev.c:3606
 __dev_queue_xmit+0x299a/0x3650 net/core/dev.c:4229
page last free stack trace:
 reset_page_owner include/linux/page_owner.h:24 [inline]
 free_pages_prepare mm/page_alloc.c:1338 [inline]
 free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1389
 free_unref_page_prepare mm/page_alloc.c:3309 [inline]
 free_unref_page+0x19/0x690 mm/page_alloc.c:3388
 qlink_free mm/kasan/quarantine.c:146 [inline]
 qlist_free_all+0x5a/0xc0 mm/kasan/quarantine.c:165
 kasan_quarantine_reduce+0x180/0x200 mm/kasan/quarantine.c:272
 __kasan_slab_alloc+0xa2/0xc0 mm/kasan/common.c:444
 kasan_slab_alloc include/linux/kasan.h:259 [inline]
 slab_post_alloc_hook mm/slab.h:519 [inline]
 slab_alloc_node mm/slub.c:3234 [inline]
 kmem_cache_alloc_node+0x255/0x3f0 mm/slub.c:3270
 __alloc_skb+0x215/0x340 net/core/skbuff.c:414
 alloc_skb include/linux/skbuff.h:1126 [inline]
 alloc_skb_with_frags+0x93/0x620 net/core/skbuff.c:6078
 sock_alloc_send_pskb+0x783/0x910 net/core/sock.c:2575
 mld_newpack+0x1df/0x770 net/ipv6/mcast.c:1754
 add_grhead+0x265/0x330 net/ipv6/mcast.c:1857
 add_grec+0x1053/0x14e0 net/ipv6/mcast.c:1995
 mld_send_initial_cr.part.0+0xf6/0x230 net/ipv6/mcast.c:2242
 mld_send_initial_cr net/ipv6/mcast.c:1232 [inline]
 mld_dad_work+0x1d3/0x690 net/ipv6/mcast.c:2268
 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298
 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445

Memory state around the buggy address:
 ffff88807f1cb600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff88807f1cb680: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc
>ffff88807f1cb700: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                        ^
 ffff88807f1cb780: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc
 ffff88807f1cb800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: 41063e9dd119 ("ipv4: Early TCP socket demux.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20211220143330.680945-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: move inet6_sk(sk)->rx_dst_cookie to sk->sk_rx_dst_cookie

[ Upstream commit ef57c1610dd8fba5031bf71e0db73356190de151 ]

Increase cache locality by moving rx_dst_coookie next to sk->sk_rx_dst

This removes one or two cache line misses in IPv6 early demux (TCP/UDP)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: move inet->rx_dst_ifindex to sk->sk_rx_dst_ifindex

[ Upstream commit 0c0a5ef809f9150e9229e7b13e43183b681b7a39 ]

Increase cache locality by moving rx_dst_ifindex next to sk->sk_rx_dst

This is part of an effort to reduce cache line misses in TCP fast path.

This removes one cache line miss in early demux.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qlcnic: potential dereference null pointer of rx_queue->page_ring

[ Upstream commit 60ec7fcfe76892a1479afab51ff17a4281923156 ]

The return value of kcalloc() needs to be checked.
To avoid dereference of null pointer in case of the failure of alloc.
Therefore, it might be better to change the return type of
qlcnic_sriov_alloc_vlans() and return -ENOMEM when alloc fails and
return 0 the others.
Also, qlcnic_sriov_set_guest_vlan_mode() and __qlcnic_pci_sriov_enable()
should deal with the return value of qlcnic_sriov_alloc_vlans().

Fixes: 154d0c810c53 ("qlcnic: VLAN enhancement for 84XX adapters")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: marvell: prestera: fix incorrect structure access

[ Upstream commit 2efc2256febf214e7b2bdaa21fe6c3c3146acdcb ]

In line:
upper = info->upper_dev;
We access upper_dev field, which is related only for particular events
(e.g. event == NETDEV_CHANGEUPPER). So, this line cause invalid memory
access for another events,
when ptr is not netdev_notifier_changeupper_info.

The KASAN logs are as follows:

[   30.123165] BUG: KASAN: stack-out-of-bounds in prestera_netdev_port_event.constprop.0+0x68/0x538 [prestera]
[   30.133336] Read of size 8 at addr ffff80000cf772b0 by task udevd/778
[   30.139866]
[   30.141398] CPU: 0 PID: 778 Comm: udevd Not tainted 5.16.0-rc3 #6
[   30.147588] Hardware name: DNI AmazonGo1 A7040 board (DT)
[   30.153056] Call trace:
[   30.155547]  dump_backtrace+0x0/0x2c0
[   30.159320]  show_stack+0x18/0x30
[   30.162729]  dump_stack_lvl+0x68/0x84
[   30.166491]  print_address_description.constprop.0+0x74/0x2b8
[   30.172346]  kasan_report+0x1e8/0x250
[   30.176102]  __asan_load8+0x98/0xe0
[   30.179682]  prestera_netdev_port_event.constprop.0+0x68/0x538 [prestera]
[   30.186847]  prestera_netdev_event_handler+0x1b4/0x1c0 [prestera]
[   30.193313]  raw_notifier_call_chain+0x74/0xa0
[   30.197860]  call_netdevice_notifiers_info+0x68/0xc0
[   30.202924]  register_netdevice+0x3cc/0x760
[   30.207190]  register_netdev+0x24/0x50
[   30.211015]  prestera_device_register+0x8a0/0xba0 [prestera]

Fixes: 3d5048cc54bd ("net: marvell: prestera: move netdev topology validation to prestera_main")
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Link: https://lore.kernel.org/r/20211216171714.11341-1-yevhen.orlov@plvision.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: marvell: prestera: fix incorrect return of port_find

[ Upstream commit 8b681bd7c301c423fbe97a6b23388a2180ff04ca ]

In case, when some ports is in list and we don't find requested - we
return last iterator state and not return NULL as expected.

Fixes: 501ef3066c89 ("net: marvell: prestera: Add driver for Prestera family ASIC devices")
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Link: https://lore.kernel.org/r/20211216170736.8851-1-yevhen.orlov@plvision.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: xsk: return xsk buffers back to pool when cleaning the ring

[ Upstream commit afe8a3ba85ec2a6b6849367e25c06a2f8e0ddd05 ]

Currently we only NULL the xdp_buff pointer in the internal SW ring but
we never give it back to the xsk buffer pool. This means that buffers
can be leaked out of the buff pool and never be used again.

Add missing xsk_buff_free() call to the routine that is supposed to
clean the entries that are left in the ring so that these buffers in the
umem can be used by other sockets.

Also, only go through the space that is actually left to be cleaned
instead of a whole ring.

Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Use xdp_buf instead of rx_buf for xsk zero-copy

[ Upstream commit 57f7f8b6bc0bc80d94443f94fe5f21f266499a2b ]

In order to use the new xsk batched buffer allocation interface, a
pointer to an array of struct xsk_buff pointers need to be provided so
that the function can put the result of the allocation there. In the
ice driver, we already have a ring that stores pointers to
xdp_buffs. This is only used for the xsk zero-copy driver and is a
union with the structure that is used for the regular non zero-copy
path. Unfortunately, that structure is larger than the xdp_buffs
pointers which mean that there will be a stride (of 20 bytes) between
each xdp_buff pointer. And feeding this into the xsk_buff_alloc_batch
interface will not work since it assumes a regular array of xdp_buff
pointers (each 8 bytes with 0 bytes in-between them on a 64-bit
system).

To fix this, remove the xdp_buff pointer from the rx_buf union and
move it one step higher to the union above which only has pointers to
arrays in it. This solves the problem and we can directly feed the SW
ring of xdp_buff pointers straight into the allocation function in the
next patch when that interface is used. This will improve performance.

Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-4-magnus.karlsson@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6qdl-wandboard: Fix Ethernet support

[ Upstream commit 39e660687ac0c57499134765abbecf71cfd11eae ]

Currently, the imx6q-wandboard Ethernet does not transmit any
data.

This issue has been exposed by commit f5d9aa79dfdf ("ARM: imx6q:
remove clk-out fixup for the Atheros AR8031 and AR8035 PHYs").

Fix it by describing the qca,clk-out-frequency property as suggested
by the commit above.

Fixes: 77591e42458d ("ARM: dts: imx6qdl-wandboard: add ethernet PHY description")
Signed-off-by: Martin Haaß <vvvrrooomm@gmail.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: fix regression in looped (broad|multi)cast's MAC handling

[ Upstream commit ebb966d3bdfed581ecccbb4a7432341baf7619b4 ]

In commit 5648b5e1169f ("netfilter: nfnetlink_queue: fix OOB when mac
header was cleared"), the test for non-empty MAC header introduced in
commit 2c38de4c1f8da7 ("netfilter: fix looped (broad|multi)cast's MAC
handling") has been replaced with a test for a set MAC header.

This breaks the case when the MAC header has been reset (using
skb_reset_mac_header), as is the case with looped-back multicast
packets.  As a result, the packets ending up in NFQUEUE get a bogus
hwaddr interpreted from the first bytes of the IP header.

This patch adds a test for a non-empty MAC header in addition to the
test for a set MAC header.  The same two tests are also implemented in
nfnetlink_log.c, where the initial code of commit 2c38de4c1f8da7
("netfilter: fix looped (broad|multi)cast's MAC handling") has not been
touched, but where supposedly the same situation may happen.

Fixes: 5648b5e1169f ("netfilter: nfnetlink_queue: fix OOB when mac header was cleared")
Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: fix use-after-free in nft_set_catchall_destroy()

[ Upstream commit 0f7d9b31ce7abdbb29bf018131ac920c9f698518 ]

We need to use list_for_each_entry_safe() iterator
because we can not access @catchall after kfree_rcu() call.

syzbot reported:

BUG: KASAN: use-after-free in nft_set_catchall_destroy net/netfilter/nf_tables_api.c:4486 [inline]
BUG: KASAN: use-after-free in nft_set_destroy net/netfilter/nf_tables_api.c:4504 [inline]
BUG: KASAN: use-after-free in nft_set_destroy+0x3fd/0x4f0 net/netfilter/nf_tables_api.c:4493
Read of size 8 at addr ffff8880716e5b80 by task syz-executor.3/8871

CPU: 1 PID: 8871 Comm: syz-executor.3 Not tainted 5.16.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 print_address_description.constprop.0.cold+0x8d/0x2ed mm/kasan/report.c:247
 __kasan_report mm/kasan/report.c:433 [inline]
 kasan_report.cold+0x83/0xdf mm/kasan/report.c:450
 nft_set_catchall_destroy net/netfilter/nf_tables_api.c:4486 [inline]
 nft_set_destroy net/netfilter/nf_tables_api.c:4504 [inline]
 nft_set_destroy+0x3fd/0x4f0 net/netfilter/nf_tables_api.c:4493
 __nft_release_table+0x79f/0xcd0 net/netfilter/nf_tables_api.c:9626
 nft_rcv_nl_event+0x4f8/0x670 net/netfilter/nf_tables_api.c:9688
 notifier_call_chain+0xb5/0x200 kernel/notifier.c:83
 blocking_notifier_call_chain kernel/notifier.c:318 [inline]
 blocking_notifier_call_chain+0x67/0x90 kernel/notifier.c:306
 netlink_release+0xcb6/0x1dd0 net/netlink/af_netlink.c:788
 __sock_release+0xcd/0x280 net/socket.c:649
 sock_close+0x18/0x20 net/socket.c:1314
 __fput+0x286/0x9f0 fs/file_table.c:280
 task_work_run+0xdd/0x1a0 kernel/task_work.c:164
 tracehook_notify_resume include/linux/tracehook.h:189 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:175 [inline]
 exit_to_user_mode_prepare+0x27e/0x290 kernel/entry/common.c:207
 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline]
 syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:300
 do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f75fbf28adb
Code: 0f 05 48 3d 00 f0 ff ff 77 45 c3 0f 1f 40 00 48 83 ec 18 89 7c 24 0c e8 63 fc ff ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 a1 fc ff ff 8b 44
RSP: 002b:00007ffd8da7ec10 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000004 RCX: 00007f75fbf28adb
RDX: 00007f75fc08e828 RSI: ffffffffffffffff RDI: 0000000000000003
RBP: 00007f75fc08a960 R08: 0000000000000000 R09: 00007f75fc08e830
R10: 00007ffd8da7ed10 R11: 0000000000000293 R12: 00000000002067c3
R13: 00007ffd8da7ed10 R14: 00007f75fc088f60 R15: 0000000000000032
 </TASK>

Allocated by task 8886:
 kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38
 kasan_set_track mm/kasan/common.c:46 [inline]
 set_alloc_info mm/kasan/common.c:434 [inline]
 ____kasan_kmalloc mm/kasan/common.c:513 [inline]
 ____kasan_kmalloc mm/kasan/common.c:472 [inline]
 __kasan_kmalloc+0xa6/0xd0 mm/kasan/common.c:522
 kasan_kmalloc include/linux/kasan.h:269 [inline]
 kmem_cache_alloc_trace+0x1ea/0x4a0 mm/slab.c:3575
 kmalloc include/linux/slab.h:590 [inline]
 nft_setelem_catchall_insert net/netfilter/nf_tables_api.c:5544 [inline]
 nft_setelem_insert net/netfilter/nf_tables_api.c:5562 [inline]
 nft_add_set_elem+0x232e/0x2f40 net/netfilter/nf_tables_api.c:5936
 nf_tables_newsetelem+0x6ff/0xbb0 net/netfilter/nf_tables_api.c:6032
 nfnetlink_rcv_batch+0x1710/0x25f0 net/netfilter/nfnetlink.c:513
 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:634 [inline]
 nfnetlink_rcv+0x3af/0x420 net/netfilter/nfnetlink.c:652
 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1345
 netlink_sendmsg+0x904/0xdf0 net/netlink/af_netlink.c:1921
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:724
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Freed by task 15335:
 kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38
 kasan_set_track+0x21/0x30 mm/kasan/common.c:46
 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370
 ____kasan_slab_free mm/kasan/common.c:366 [inline]
 ____kasan_slab_free mm/kasan/common.c:328 [inline]
 __kasan_slab_free+0xd1/0x110 mm/kasan/common.c:374
 kasan_slab_free include/linux/kasan.h:235 [inline]
 __cache_free mm/slab.c:3445 [inline]
 kmem_cache_free_bulk+0x67/0x1e0 mm/slab.c:3766
 kfree_bulk include/linux/slab.h:446 [inline]
 kfree_rcu_work+0x51c/0xa10 kernel/rcu/tree.c:3273
 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298
 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445
 kthread+0x405/0x4f0 kernel/kthread.c:327
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295

Last potentially related work creation:
 kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38
 __kasan_record_aux_stack+0xb5/0xe0 mm/kasan/generic.c:348
 kvfree_call_rcu+0x74/0x990 kernel/rcu/tree.c:3550
 nft_set_catchall_destroy net/netfilter/nf_tables_api.c:4489 [inline]
 nft_set_destroy net/netfilter/nf_tables_api.c:4504 [inline]
 nft_set_destroy+0x34a/0x4f0 net/netfilter/nf_tables_api.c:4493
 __nft_release_table+0x79f/0xcd0 net/netfilter/nf_tables_api.c:9626
 nft_rcv_nl_event+0x4f8/0x670 net/netfilter/nf_tables_api.c:9688
 notifier_call_chain+0xb5/0x200 kernel/notifier.c:83
 blocking_notifier_call_chain kernel/notifier.c:318 [inline]
 blocking_notifier_call_chain+0x67/0x90 kernel/notifier.c:306
 netlink_release+0xcb6/0x1dd0 net/netlink/af_netlink.c:788
 __sock_release+0xcd/0x280 net/socket.c:649
 sock_close+0x18/0x20 net/socket.c:1314
 __fput+0x286/0x9f0 fs/file_table.c:280
 task_work_run+0xdd/0x1a0 kernel/task_work.c:164
 tracehook_notify_resume include/linux/tracehook.h:189 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:175 [inline]
 exit_to_user_mode_prepare+0x27e/0x290 kernel/entry/common.c:207
 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline]
 syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:300
 do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x44/0xae

The buggy address belongs to the object at ffff8880716e5b80
 which belongs to the cache kmalloc-64 of size 64
The buggy address is located 0 bytes inside of
 64-byte region [ffff8880716e5b80, ffff8880716e5bc0)
The buggy address belongs to the page:
page:ffffea0001c5b940 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff8880716e5c00 pfn:0x716e5
flags: 0xfff00000000200(slab|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000000200 ffffea0000911848 ffffea00007c4d48 ffff888010c40200
raw: ffff8880716e5c00 ffff8880716e5000 000000010000001e 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x242040(__GFP_IO|__GFP_NOWARN|__GFP_COMP|__GFP_THISNODE), pid 3638, ts 211086074437, free_ts 211031029429
 prep_new_page mm/page_alloc.c:2418 [inline]
 get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4149
 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5369
 __alloc_pages_node include/linux/gfp.h:570 [inline]
 kmem_getpages mm/slab.c:1377 [inline]
 cache_grow_begin+0x75/0x470 mm/slab.c:2593
 cache_alloc_refill+0x27f/0x380 mm/slab.c:2965
 ____cache_alloc mm/slab.c:3048 [inline]
 ____cache_alloc mm/slab.c:3031 [inline]
 __do_cache_alloc mm/slab.c:3275 [inline]
 slab_alloc mm/slab.c:3316 [inline]
 __do_kmalloc mm/slab.c:3700 [inline]
 __kmalloc+0x3b3/0x4d0 mm/slab.c:3711
 kmalloc include/linux/slab.h:595 [inline]
 kzalloc include/linux/slab.h:724 [inline]
 tomoyo_get_name+0x234/0x480 security/tomoyo/memory.c:173
 tomoyo_parse_name_union+0xbc/0x160 security/tomoyo/util.c:260
 tomoyo_update_path_number_acl security/tomoyo/file.c:687 [inline]
 tomoyo_write_file+0x629/0x7f0 security/tomoyo/file.c:1034
 tomoyo_write_domain2+0x116/0x1d0 security/tomoyo/common.c:1152
 tomoyo_add_entry security/tomoyo/common.c:2042 [inline]
 tomoyo_supervisor+0xbc7/0xf00 security/tomoyo/common.c:2103
 tomoyo_audit_path_number_log security/tomoyo/file.c:235 [inline]
 tomoyo_path_number_perm+0x419/0x590 security/tomoyo/file.c:734
 security_file_ioctl+0x50/0xb0 security/security.c:1541
 __do_sys_ioctl fs/ioctl.c:868 [inline]
 __se_sys_ioctl fs/ioctl.c:860 [inline]
 __x64_sys_ioctl+0xb3/0x200 fs/ioctl.c:860
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
page last free stack trace:
 reset_page_owner include/linux/page_owner.h:24 [inline]
 free_pages_prepare mm/page_alloc.c:1338 [inline]
 free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1389
 free_unref_page_prepare mm/page_alloc.c:3309 [inline]
 free_unref_page+0x19/0x690 mm/page_alloc.c:3388
 slab_destroy mm/slab.c:1627 [inline]
 slabs_destroy+0x89/0xc0 mm/slab.c:1647
 cache_flusharray mm/slab.c:3418 [inline]
 ___cache_free+0x4cc/0x610 mm/slab.c:3480
 qlink_free mm/kasan/quarantine.c:146 [inline]
 qlist_free_all+0x4e/0x110 mm/kasan/quarantine.c:165
 kasan_quarantine_reduce+0x180/0x200 mm/kasan/quarantine.c:272
 __kasan_slab_alloc+0x97/0xb0 mm/kasan/common.c:444
 kasan_slab_alloc include/linux/kasan.h:259 [inline]
 slab_post_alloc_hook mm/slab.h:519 [inline]
 slab_alloc_node mm/slab.c:3261 [inline]
 kmem_cache_alloc_node+0x2ea/0x590 mm/slab.c:3599
 __alloc_skb+0x215/0x340 net/core/skbuff.c:414
 alloc_skb include/linux/skbuff.h:1126 [inline]
 nlmsg_new include/net/netlink.h:953 [inline]
 rtmsg_ifinfo_build_skb+0x72/0x1a0 net/core/rtnetlink.c:3808
 rtmsg_ifinfo_event net/core/rtnetlink.c:3844 [inline]
 rtmsg_ifinfo_event net/core/rtnetlink.c:3835 [inline]
 rtmsg_ifinfo+0x83/0x120 net/core/rtnetlink.c:3853
 netdev_state_change net/core/dev.c:1395 [inline]
 netdev_state_change+0x114/0x130 net/core/dev.c:1386
 linkwatch_do_dev+0x10e/0x150 net/core/link_watch.c:167
 __linkwatch_run_queue+0x233/0x6a0 net/core/link_watch.c:213
 linkwatch_event+0x4a/0x60 net/core/link_watch.c:252
 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298

Memory state around the buggy address:
 ffff8880716e5a80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
 ffff8880716e5b00: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc
>ffff8880716e5b80: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
                   ^
 ffff8880716e5c00: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
 ffff8880716e5c80: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc

Fixes: aaa31047a6d2 ("netfilter: nftables: add catch-all set element support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Replace kfree() with kvfree()

[ Upstream commit 12d3bbdd6bd2780b71cc466f3fbc6eb7d43bbc2a ]

Variables allocated by kvmalloc_array() should not be freed by kfree.
Because they may be allocated by vmalloc.  So we replace kfree() with
kvfree() here.

Fixes: 6fd610c5733d ("RDMA/hns: Support 0 hop addressing for SRQ buffer")
Link: https://lore.kernel.org/r/20211210094234.5829-1-billsjc@sjtu.edu.cn
Signed-off-by: Jiacheng Shi <billsjc@sjtu.edu.cn>
Acked-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/qib: Fix memory leak in qib_user_sdma_queue_pkts()

[ Upstream commit bee90911e0138c76ee67458ac0d58b38a3190f65 ]

The wrong goto label was used for the error case and missed cleanup of the
pkt allocation.

Fixes: d39bf40e55e6 ("IB/qib: Protect from buffer overflow in struct qib_user_sdma_pkt fields")
Link: https://lore.kernel.org/r/20211208175238.29983-1-jose.exposito89@gmail.com
Addresses-Coverity-ID: 1493352 ("Resource leak")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix RNR retransmission issue for HIP08

[ Upstream commit 4ad8181426df92976feee5fbc55236293d069b37 ]

Due to the discrete nature of the HIP08 timer unit, a requester might
finish the timeout period sooner, in elapsed real time, than its responder
does, even when both sides share the identical RNR timeout length included
in the RNR Nak packet and the responder indeed starts the timing prior to
the requester. Furthermore, if a 'providential' resend packet arrived
before the responder's timeout period expired, the responder is certainly
entitled to drop the packet silently in the light of IB protocol.

To address this problem, our team made good use of certain hardware facts:

1) The timing resolution regards the transmission arrangements is 1
   microsecond, e.g. if cq_period field is set to 3, it would be
   interpreted as 3 microsecond by hardware

2) A QPC field shall inform the hardware how many timing unit (ticks)
   constitutes a full microsecond, which, by default, is 1000

3) It takes 14ns for the processor to handle a packet in the buffer, so
   the RNR timeout length of 10ns would ensure our processing mechanism is
   disabled during the entire timeout period and the packet won't be
   dropped silently

To achieve (3), we permanently set the QPC field mentioned in (2) to zero
which nominally indicates every time tick is equivalent to a microsecond
in wall-clock time; now, a RNR timeout period at face value of 10 would
only last 10 ticks, which is 10ns in wall-clock time.

It's worth noting that we adapt the driver by magnifying certain
configuration parameters(cq_period, eq_period and ack_timeout)by 1000
given the user assumes the configuring timing unit to be microseconds.

Also, this particular improvisation is only deployed on HIP08 since other
hardware has already solved this issue.

Fixes: cfc85f3e4b7f ("RDMA/hns: Add profile support for hip08 driver")
Link: https://lore.kernel.org/r/20211209140655.49493-1-liangwenpeng@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: meson: aiu: fifo: Add missing dma_coerce_mask_and_coherent()

[ Upstream commit 1bcd326631dc4faa3322d60b4fc45e8b3747993e ]

The FIFO registers which take an DMA-able address are only 32-bit wide
on AIU. Add dma_coerce_mask_and_coherent() to make the DMA core aware of
this limitation.

Fixes: 6ae9ca9ce986bf ("ASoC: meson: aiu: add i2s and spdif support")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20211206210804.2512999-2-martin.blumenstingl@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: hdmi: Perform NULL pointer check for mtk_hdmi_conf

[ Upstream commit 3b8e19a0aa3933a785be9f1541afd8d398c4ec69 ]

In commit 41ca9caaae0b
("drm/mediatek: hdmi: Add check for CEA modes only") a check
for CEA modes was added to function mtk_hdmi_bridge_mode_valid()
in order to address possible issues on MT8167;
moreover, with commit c91026a938c2
("drm/mediatek: hdmi: Add optional limit on maximal HDMI mode clock")
another similar check was introduced.

Unfortunately though, at the time of writing, MT8173 does not provide
any mtk_hdmi_conf structure and this is crashing the kernel with NULL
pointer upon entering mtk_hdmi_bridge_mode_valid(), which happens as
soon as a HDMI cable gets plugged in.

To fix this regression, add a NULL pointer check for hdmi->conf in the
said function, restoring HDMI functionality and avoiding NULL pointer
kernel panics.

Fixes: 41ca9caaae0b ("drm/mediatek: hdmi: Add check for CEA modes only")
Fixes: c91026a938c2 ("drm/mediatek: hdmi: Add optional limit on maximal HDMI mode clock")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ucounts: Fix rlimit max values check

[ Upstream commit 59ec71575ab440cd5ca0aa53b2a2985b3639fad4 ]

The semantics of the rlimit max values differs from ucounts itself. When
creating a new userns, we store the current rlimit of the process in
ucount_max. Thus, the value of the limit in the parent userns is saved
in the created one.

The problem is that now we are taking the maximum value for counter from
the same userns. So for init_user_ns it will always be RLIM_INFINITY.

To fix the problem we need to check the counter value with the max value
stored in userns.

Reproducer:

su - test -c "ulimit -u 3; sleep 5 & sleep 6 & unshare -U --map-root-user sh -c 'sleep 7 & sleep 8 & date; wait'"

Before:

[1] 175
[2] 176
Fri Nov 26 13:48:20 UTC 2021
[1]-  Done                    sleep 5
[2]+  Done                    sleep 6

After:

[1] 167
[2] 168
sh: fork: retry: Resource temporarily unavailable
sh: fork: retry: Resource temporarily unavailable
sh: fork: retry: Resource temporarily unavailable
sh: fork: retry: Resource temporarily unavailable
sh: fork: retry: Resource temporarily unavailable
sh: fork: retry: Resource temporarily unavailable
sh: fork: retry: Resource temporarily unavailable
sh: fork: Interrupted system call
[1]-  Done                    sleep 5
[2]+  Done                    sleep 6

Fixes: c54b245d0118 ("Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace")
Reported-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Link: https://lkml.kernel.org/r/024ec805f6e16896f0b23e094773790d171d2c1c.1638218242.git.legion@kernel.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: change clk_disable_unprepare to clk_unprepare

[ Upstream commit db6689b643d8653092f5853751ea2cdbc299f8d3 ]

The corresponding API for clk_prepare is clk_unprepare, other than
clk_disable_unprepare.

Fix this by changing clk_disable_unprepare to clk_unprepare.

Fixes: 5762ab71eb24 ("spi: Add support for Armada 3700 SPI Controller")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Link: https://lore.kernel.org/r/20211206101931.2816597-1-mudongliangabcd@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: sunxi-rsb: Fix shutdown

[ Upstream commit 017a716e7b0e9d4ac06a4d7779bd04fca009bbc9 ]

Function sunxi_rsb_hw_exit() is sometimes called with pm runtime
disabled, so in such cases pm_runtime_resume() will fail with -EACCES.

Instead of doing whole dance of enabling pm runtime and thus clock just
to disable it again immediately, just check if disabling clock is
needed. That way calling pm_runtime_resume() is not needed at all.

Fixes: 4a0dbc12e618 ("bus: sunxi-rsb: Implement runtime power management")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211121083537.612473-1-jernej.skrabec@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: orangepi-zero-plus: fix PHY mode

[ Upstream commit 08d2061ff9c5319a07bf9ca6bbf11fdec68f704a ]

Orange Pi Zero Plus uses a Realtek RTL8211E RGMII Gigabit PHY, but its
currently set to plain RGMII mode meaning that it doesn't introduce
delays.

With this setup, TX packets are completely lost and changing the mode to
RGMII-ID so the PHY will add delays internally fixes the issue.

Fixes: a7affb13b271 ("arm64: allwinner: H5: Add Xunlong Orange Pi Zero Plus")
Acked-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Ron Goossens <rgoossens@gmail.com>
Tested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211117140222.43692-1-robert.marko@sartura.hr
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM: sleep: Fix error handling in dpm_prepare()

commit 544e737dea5ad1a457f25dbddf68761ff25e028b upstream.

Commit 2aa36604e824 ("PM: sleep: Avoid calling put_device() under
dpm_list_mtx") forgot to update the while () loop termination
condition to also break the loop if error is nonzero, which
causes the loop to become infinite if device_prepare() returns
an error for one device.

Add the missing !error check.

Fixes: 2aa36604e824 ("PM: sleep: Avoid calling put_device() under dpm_list_mtx")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSD: Fix READDIR buffer overflow

commit 53b1119a6e5028b125f431a0116ba73510d82a72 upstream.

If a client sends a READDIR count argument that is too small (say,
zero), then the buffer size calculation in the new init_dirlist
helper functions results in an underflow, allowing the XDR stream
functions to write beyond the actual buffer.

This calculation has always been suspect. NFSD has never sanity-
checked the READDIR count argument, but the old entry encoders
managed the problem correctly.

With the commits below, entry encoding changed, exposing the
underflow to the pointer arithmetic in xdr_reserve_space().

Modern NFS clients attempt to retrieve as much data as possible
for each READDIR request. Also, we have no unit tests that
exercise the behavior of READDIR at the lower bound of @count
values. Thus this case was missed during testing.

Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Fixes: f5dcccd647da ("NFSD: Update the NFSv2 READDIR entry encoder to use struct xdr_stream")
Fixes: 7f87fc2d34d4 ("NFSD: Update NFSv3 READDIR entry encoders to use struct xdr_stream")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: potential dereference of null pointer

commit 13251ce1dd9bb525da2becb9b26fdfb94ca58659 upstream.

The return value of devm_kzalloc() needs to be checked.
To avoid hdev->dev->driver_data to be null in case of the failure of
alloc.

Fixes: 14c9c014babe ("HID: add vivaldi HID driver")
Cc: stable@vger.kernel.org
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211215083605.117638-1-jiasheng@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: holtek: fix mouse probing

commit 93a2207c254ca102ebbdae47b00f19bbfbfa7ecd upstream.

An overlook from the previous commit: we don't even parse or start the
device, meaning that the device is not presented to user space.

Fixes: 93020953d0fa ("HID: check for valid USB device for many HID drivers")
Cc: stable@vger.kernel.org
Link: https://bugs.archlinux.org/task/73048
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215341
Link: https://lore.kernel.org/r/e4efbf13-bd8d-0370-629b-6c80c0044b15@leemhuis.info/
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: KVM: Fix non-x86 compiling

commit 577e022b7b41854911dcfb03678d8d2b930e8a3f upstream.

Attempting to compile on a non-x86 architecture fails with

include/kvm_util.h: In function â€˜vm_compute_max_gfn’:
include/kvm_util.h:79:21: error: dereferencing pointer to incomplete type â€˜struct kvm_vm’
  return ((1ULL << vm->pa_bits) >> vm->page_shift) - 1;
                     ^~

This is because the declaration of struct kvm_vm is in
lib/kvm_util_internal.h as an effort to make it private to
the test lib code. We can still provide arch specific functions,
though, by making the generic function symbols weak. Do that to
fix the compile error.

Fixes: c8cc43c1eae2 ("selftests: KVM: avoid failures due to reserved HyperTransport region")
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20211214151842.848314-1-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: check for inconsistent extents between index and leaf block

commit 9c6e071913792d80894cd0be98cc3c4b770e26d3 upstream.

Now that we can check out overlapping extents in leaf block and
out-of-order index extents in index block. But the .ee_block in the
first extent of one leaf block should equal to the .ei_block in it's
parent index extent entry. This patch add a check to verify such
inconsistent between the index and leaf block.

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210908120850.4012324-3-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: check for out-of-order index extents in ext4_valid_extent_entries()

commit 8dd27fecede55e8a4e67eef2878040ecad0f0d33 upstream.

After commit 5946d089379a ("ext4: check for overlapping extents in
ext4_valid_extent_entries()"), we can check out the overlapping extent
entry in leaf extent blocks. But the out-of-order extent entry in index
extent blocks could also trigger bad things if the filesystem is
inconsistent. So this patch add a check to figure out the out-of-order
index extents and return error.

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210908120850.4012324-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: prevent partial update of the extent blocks

commit 0f2f87d51aebcf71a709b52f661d681594c7dffa upstream.

In the most error path of current extents updating operations are not
roll back partial updates properly when some bad things happens(.e.g in
ext4_ext_insert_extent()). So we may get an inconsistent extents tree
if journal has been aborted due to IO error, which may probability lead
to BUGON later when we accessing these extent entries in errors=continue
mode. This patch drop extent buffer's verify flag before updatng the
contents in ext4_ext_get_access(), and reset it after updating in
__ext4_ext_dirty(). After this patch we could force to check the extent
buffer if extents tree updating was break off, make sure the extents are
consistent.

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210908120850.4012324-4-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: usb: lan78xx: add Allied Telesis AT29M2-AF

commit ef8a0f6eab1ca5d1a75c242c5c7b9d386735fa0a upstream.

This adds the vendor and product IDs for the AT29M2-AF which is a
lan7801-based device.

Signed-off-by: Greg Jesionowski <jesionowskigreg@gmail.com>
Link: https://lore.kernel.org/r/20211214221027.305784-1-jesionowskigreg@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: vdso32: require CROSS_COMPILE_COMPAT for gcc+bfd

commit 3e6f8d1fa18457d54b20917bd9174d27daf09ab9 upstream.

Similar to
commit 231ad7f409f1 ("Makefile: infer --target from ARCH for CC=clang")
There really is no point in setting --target based on
$CROSS_COMPILE_COMPAT for clang when the integrated assembler is being
used, since
commit ef94340583ee ("arm64: vdso32: drop -no-integrated-as flag").

Allows COMPAT_VDSO to be selected without setting $CROSS_COMPILE_COMPAT
when using clang and lld together.

Before:
$ ARCH=arm64 CROSS_COMPILE_COMPAT=arm-linux-gnueabi- make -j72 LLVM=1 defconfig
$ grep CONFIG_COMPAT_VDSO .config
CONFIG_COMPAT_VDSO=y
$ ARCH=arm64 make -j72 LLVM=1 defconfig
$ grep CONFIG_COMPAT_VDSO .config
$

After:
$ ARCH=arm64 CROSS_COMPILE_COMPAT=arm-linux-gnueabi- make -j72 LLVM=1 defconfig
$ grep CONFIG_COMPAT_VDSO .config
CONFIG_COMPAT_VDSO=y
$ ARCH=arm64 make -j72 LLVM=1 defconfig
$ grep CONFIG_COMPAT_VDSO .config
CONFIG_COMPAT_VDSO=y

Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20211019223646.1146945-5-ndesaulniers@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.11

Link: https://lore.kernel.org/r/20211220143040.058287525@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/netback: don't queue unlimited number of packages

commit be81992f9086b230623ae3ebbc85ecee4d00a3d3 upstream.

In case a guest isn't consuming incoming network traffic as fast as it
is coming in, xen-netback is buffering network packages in unlimited
numbers today. This can result in host OOM situations.

Commit f48da8b14d04ca8 ("xen-netback: fix unlimited guest Rx internal
queue and carrier flapping") meant to introduce a mechanism to limit
the amount of buffered data by stopping the Tx queue when reaching the
data limit, but this doesn't work for cases like UDP.

When hitting the limit don't queue further SKBs, but drop them instead.
In order to be able to tell Rx packages have been dropped increment the
rx_dropped statistics counter in this case.

It should be noted that the old solution to continue queueing SKBs had
the additional problem of an overflow of the 32-bit rx_queue_len value
would result in intermittent Tx queue enabling.

This is part of XSA-392

Fixes: f48da8b14d04ca8 ("xen-netback: fix unlimited guest Rx internal queue and carrier flapping")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/netback: fix rx queue stall detection

commit 6032046ec4b70176d247a71836186d47b25d1684 upstream.

Commit 1d5d48523900a4b ("xen-netback: require fewer guest Rx slots when
not using GSO") introduced a security problem in netback, as an
interface would only be regarded to be stalled if no slot is available
in the rx queue ring page. In case the SKB at the head of the queued
requests will need more than one rx slot and only one slot is free the
stall detection logic will never trigger, as the test for that is only
looking for at least one slot to be free.

Fix that by testing for the needed number of slots instead of only one
slot being available.

In order to not have to take the rx queue lock that often, store the
number of needed slots in the queue data. As all SKB dequeue operations
happen in the rx queue kernel thread this is safe, as long as the
number of needed slots is accessed via READ/WRITE_ONCE() only and
updates are always done with the rx queue lock held.

Add a small helper for obtaining the number of free slots.

This is part of XSA-392

Fixes: 1d5d48523900a4b ("xen-netback: require fewer guest Rx slots when not using GSO")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/console: harden hvc_xen against event channel storms

commit fe415186b43df0db1f17fa3a46275fd92107fe71 upstream.

The Xen console driver is still vulnerable for an attack via excessive
number of events sent by the backend. Fix that by using a lateeoi event
channel.

For the normal domU initial console this requires the introduction of
bind_evtchn_to_irq_lateeoi() as there is no xenbus device available
at the time the event channel is bound to the irq.

As the decision whether an interrupt was spurious or not requires to
test for bytes having been read from the backend, move sending the
event into the if statement, as sending an event without having found
any bytes to be read is making no sense at all.

This is part of XSA-391

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/netfront: harden netfront against event channel storms

commit b27d47950e481f292c0a5ad57357edb9d95d03ba upstream.

The Xen netfront driver is still vulnerable for an attack via excessive
number of events sent by the backend. Fix that by using lateeoi event
channels.

For being able to detect the case of no rx responses being added while
the carrier is down a new lock is needed in order to update and test
rsp_cons and the number of seen unconsumed responses atomically.

This is part of XSA-391

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/blkfront: harden blkfront against event channel storms

commit 0fd08a34e8e3b67ec9bd8287ac0facf8374b844a upstream.

The Xen blkfront driver is still vulnerable for an attack via excessive
number of events sent by the backend. Fix that by using lateeoi event
channels.

This is part of XSA-391

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "xsk: Do not sleep in poll() when need_wakeup set"

commit 0706a78f31c4217ca144f630063ec9561a21548d upstream.

This reverts commit bd0687c18e635b63233dc87f38058cd728802ab4.

This patch causes a Tx only workload to go to sleep even when it does
not have to, leading to misserable performance in skb mode. It fixed
one rare problem but created a much worse one, so this need to be
reverted while I try to craft a proper solution to the original
problem.

Fixes: bd0687c18e63 ("xsk: Do not sleep in poll() when need_wakeup set")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211217145646.26449-1-magnus.karlsson@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/damon: test debugfs file reads/writes with huge count

commit b4a002889d24979295ed3c2bf1d5fcfb3901026a upstream.

DAMON debugfs interface users were able to trigger warning by writing
some files with arbitrarily large 'count' parameter.  The issue is fixed
with commit db7a347b26fe ("mm/damon/dbgfs: use '__GFP_NOWARN' for
user-specified size buffer allocation").  This commit adds a test case
for the issue in DAMON selftests to avoid future regressions.

Link: https://lkml.kernel.org/r/20211201150440.1088-11-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: ti-sysc: Fix variable set but not used warning for reinit_modules

commit 1b1da99b845337362a3dafe0f7b49927ab4ae041 upstream.

Fix drivers/bus/ti-sysc.c:2494:13: error: variable 'error' set but not
used introduced by commit 9d881361206e ("bus: ti-sysc: Add quirk handling
for reinit on context lost").

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io-wq: drop wqe lock before creating new worker

commit d800c65c2d4eccebb27ffb7808e842d5b533823c upstream.

We have two io-wq creation paths:

- On queue enqueue
- When a worker goes to sleep

The latter invokes worker creation with the wqe->lock held, but that can
run into problems if we end up exiting and need to cancel the queued work.
syzbot caught this:

============================================
WARNING: possible recursive locking detected
5.16.0-rc4-syzkaller #0 Not tainted
--------------------------------------------
iou-wrk-6468/6471 is trying to acquire lock:
ffff88801aa98018 (&wqe->lock){+.+.}-{2:2}, at: io_worker_cancel_cb+0xb7/0x210 fs/io-wq.c:187

but task is already holding lock:
ffff88801aa98018 (&wqe->lock){+.+.}-{2:2}, at: io_wq_worker_sleeping+0xb6/0x140 fs/io-wq.c:700

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&wqe->lock);
  lock(&wqe->lock);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

1 lock held by iou-wrk-6468/6471:
 #0: ffff88801aa98018 (&wqe->lock){+.+.}-{2:2}, at: io_wq_worker_sleeping+0xb6/0x140 fs/io-wq.c:700

stack backtrace:
CPU: 1 PID: 6471 Comm: iou-wrk-6468 Not tainted 5.16.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x1dc/0x2d8 lib/dump_stack.c:106
 print_deadlock_bug kernel/locking/lockdep.c:2956 [inline]
 check_deadlock kernel/locking/lockdep.c:2999 [inline]
 validate_chain+0x5984/0x8240 kernel/locking/lockdep.c:3788
 __lock_acquire+0x1382/0x2b00 kernel/locking/lockdep.c:5027
 lock_acquire+0x19f/0x4d0 kernel/locking/lockdep.c:5637
 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
 _raw_spin_lock+0x2a/0x40 kernel/locking/spinlock.c:154
 io_worker_cancel_cb+0xb7/0x210 fs/io-wq.c:187
 io_wq_cancel_tw_create fs/io-wq.c:1220 [inline]
 io_queue_worker_create+0x3cf/0x4c0 fs/io-wq.c:372
 io_wq_worker_sleeping+0xbe/0x140 fs/io-wq.c:701
 sched_submit_work kernel/sched/core.c:6295 [inline]
 schedule+0x67/0x1f0 kernel/sched/core.c:6323
 schedule_timeout+0xac/0x300 kernel/time/timer.c:1857
 wait_woken+0xca/0x1b0 kernel/sched/wait.c:460
 unix_msg_wait_data net/unix/unix_bpf.c:32 [inline]
 unix_bpf_recvmsg+0x7f9/0xe20 net/unix/unix_bpf.c:77
 unix_stream_recvmsg+0x214/0x2c0 net/unix/af_unix.c:2832
 sock_recvmsg_nosec net/socket.c:944 [inline]
 sock_recvmsg net/socket.c:962 [inline]
 sock_read_iter+0x3a7/0x4d0 net/socket.c:1035
 call_read_iter include/linux/fs.h:2156 [inline]
 io_iter_do_read fs/io_uring.c:3501 [inline]
 io_read fs/io_uring.c:3558 [inline]
 io_issue_sqe+0x144c/0x9590 fs/io_uring.c:6671
 io_wq_submit_work+0x2d8/0x790 fs/io_uring.c:6836
 io_worker_handle_work+0x808/0xdd0 fs/io-wq.c:574
 io_wqe_worker+0x395/0x870 fs/io-wq.c:630
 ret_from_fork+0x1f/0x30

We can safely drop the lock before doing work creation, making the two
contexts the same in that regard.

Reported-by: syzbot+b18b8be69df33a3918e9@syzkaller.appspotmail.com
Fixes: 71a85387546e ("io-wq: check for wq exit after adding new worker task_work")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rcu: Mark accesses to rcu_state.n_force_qs

commit 2431774f04d1050292054c763070021bade7b151 upstream.

This commit marks accesses to the rcu_state.n_force_qs.  These data
races are hard to make happen, but syzkaller was equal to the task.

Reported-by: syzbot+e08a83a1940ec3846cd5@syzkaller.appspotmail.com
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io-wq: check for wq exit after adding new worker task_work

commit 71a85387546e50b1a37b0fa45dadcae3bfb35cf6 upstream.

We check IO_WQ_BIT_EXIT before attempting to create a new worker, and
wq exit cancels pending work if we have any. But it's possible to have
a race between the two, where creation checks exit finding it not set,
but we're in the process of exiting. The exit side will cancel pending
creation task_work, but there's a gap where we add task_work after we've
canceled existing creations at exit time.

Fix this by checking the EXIT bit post adding the creation task_work.
If it's set, run the same cancelation that exit does.

Reported-and-tested-by: syzbot+b60c982cb0efc5e05a47@syzkaller.appspotmail.com
Reviewed-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io-wq: remove spurious bit clear on task_work addition

commit e47498afeca9a0c6d07eeeacc46d563555a3f677 upstream.

There's a small race here where the task_work could finish and drop
the worker itself, so that by the time that task_work_add() returns
with a successful addition we've already put the worker.

The worker callbacks clear this bit themselves, so we don't actually
need to manually clear it in the caller. Get rid of it.

Reported-by: syzbot+b60c982cb0efc5e05a47@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: scsi_debug: Sanity check block descriptor length in resp_mode_select()

commit e0a2c28da11e2c2b963fc01d50acbf03045ac732 upstream.

In resp_mode_select() sanity check the block descriptor len to avoid UAF.

BUG: KASAN: use-after-free in resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509
Read of size 1 at addr ffff888026670f50 by task scsicmd/15032

CPU: 1 PID: 15032 Comm: scsicmd Not tainted 5.15.0-01d0625 #15
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
Call Trace:
 <TASK>
 dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:107
 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:257
 kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:443
 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report_generic.c:306
 resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509
 schedule_resp+0x4af/0x1a10 drivers/scsi/scsi_debug.c:5483
 scsi_debug_queuecommand+0x8c9/0x1e70 drivers/scsi/scsi_debug.c:7537
 scsi_queue_rq+0x16b4/0x2d10 drivers/scsi/scsi_lib.c:1521
 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1640
 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325
 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358
 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1762
 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1839
 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891
 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474
 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:63
 sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:837
 sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:775
 sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:941
 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1166
 __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:52
 do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:50
 entry_SYSCALL_64_after_hwframe+0x44/0xae arch/x86/entry/entry_64.S:113

Link: https://lore.kernel.org/r/1637262208-28850-1-git-send-email-george.kennedy@oracle.com
Reported-by: syzkaller <syzkaller@googlegroups.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: scsi_debug: Fix type in min_t to avoid stack OOB

commit 36e07d7ede88a1f1ef8f0f209af5b7612324ac2c upstream.

Change min_t() to use type "u32" instead of type "int" to avoid stack out
of bounds. With min_t() type "int" the values get sign extended and the
larger value gets used causing stack out of bounds.

BUG: KASAN: stack-out-of-bounds in memcpy include/linux/fortify-string.h:191 [inline]
BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976
Read of size 127 at addr ffff888072607128 by task syz-executor.7/18707

CPU: 1 PID: 18707 Comm: syz-executor.7 Not tainted 5.15.0-syzk #1
Hardware name: Red Hat KVM, BIOS 1.13.0-2
Call Trace:
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106
 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:256
 __kasan_report mm/kasan/report.c:442 [inline]
 kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:459
 check_region_inline mm/kasan/generic.c:183 [inline]
 kasan_check_range+0x1a3/0x210 mm/kasan/generic.c:189
 memcpy+0x23/0x60 mm/kasan/shadow.c:65
 memcpy include/linux/fortify-string.h:191 [inline]
 sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976
 sg_copy_from_buffer+0x33/0x40 lib/scatterlist.c:1000
 fill_from_dev_buffer.part.34+0x82/0x130 drivers/scsi/scsi_debug.c:1162
 fill_from_dev_buffer drivers/scsi/scsi_debug.c:1888 [inline]
 resp_readcap16+0x365/0x3b0 drivers/scsi/scsi_debug.c:1887
 schedule_resp+0x4d8/0x1a70 drivers/scsi/scsi_debug.c:5478
 scsi_debug_queuecommand+0x8c9/0x1ec0 drivers/scsi/scsi_debug.c:7533
 scsi_dispatch_cmd drivers/scsi/scsi_lib.c:1520 [inline]
 scsi_queue_rq+0x16b0/0x2d40 drivers/scsi/scsi_lib.c:1699
 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1639
 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325
 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358
 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1761
 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1838
 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891
 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474
 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:62
 sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:836
 sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:774
 sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:939
 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1165
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:874 [inline]
 __se_sys_ioctl fs/ioctl.c:860 [inline]
 __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Link: https://lore.kernel.org/r/1636484247-21254-1-git-send-email-george.kennedy@oracle.com
Reported-by: syzkaller <syzkaller@googlegroups.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: scsi_debug: Don't call kcalloc() if size arg is zero

commit 3344b58b53a76199dae48faa396e9fc37bf86992 upstream.

If the size arg to kcalloc() is zero, it returns ZERO_SIZE_PTR.  Because of
that, for a following NULL pointer check to work on the returned pointer,
kcalloc() must not be called with the size arg equal to zero. Return early
without error before the kcalloc() call if size arg is zero.

BUG: KASAN: null-ptr-deref in memcpy include/linux/fortify-string.h:191 [inline]
BUG: KASAN: null-ptr-deref in sg_copy_buffer+0x138/0x240 lib/scatterlist.c:974
Write of size 4 at addr 0000000000000010 by task syz-executor.1/22789

CPU: 1 PID: 22789 Comm: syz-executor.1 Not tainted 5.15.0-syzk #1
Hardware name: Red Hat KVM, BIOS 1.13.0-2
Call Trace:
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106
 __kasan_report mm/kasan/report.c:446 [inline]
 kasan_report.cold.14+0x112/0x117 mm/kasan/report.c:459
 check_region_inline mm/kasan/generic.c:183 [inline]
 kasan_check_range+0x1a3/0x210 mm/kasan/generic.c:189
 memcpy+0x3b/0x60 mm/kasan/shadow.c:66
 memcpy include/linux/fortify-string.h:191 [inline]
 sg_copy_buffer+0x138/0x240 lib/scatterlist.c:974
 do_dout_fetch drivers/scsi/scsi_debug.c:2954 [inline]
 do_dout_fetch drivers/scsi/scsi_debug.c:2946 [inline]
 resp_verify+0x49e/0x930 drivers/scsi/scsi_debug.c:4276
 schedule_resp+0x4d8/0x1a70 drivers/scsi/scsi_debug.c:5478
 scsi_debug_queuecommand+0x8c9/0x1ec0 drivers/scsi/scsi_debug.c:7533
 scsi_dispatch_cmd drivers/scsi/scsi_lib.c:1520 [inline]
 scsi_queue_rq+0x16b0/0x2d40 drivers/scsi/scsi_lib.c:1699
 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1639
 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325
 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358
 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1761
 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1838
 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891
 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474
 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:62
 blk_execute_rq+0xdb/0x360 block/blk-exec.c:102
 sg_scsi_ioctl drivers/scsi/scsi_ioctl.c:621 [inline]
 scsi_ioctl+0x8bb/0x15c0 drivers/scsi/scsi_ioctl.c:930
 sg_ioctl_common+0x172d/0x2710 drivers/scsi/sg.c:1112
 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1165
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:874 [inline]
 __se_sys_ioctl fs/ioctl.c:860 [inline]
 __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Link: https://lore.kernel.org/r/1636056397-13151-1-git-send-email-george.kennedy@oracle.com
Reported-by: syzkaller <syzkaller@googlegroups.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: fix warning in ovl_create_real()

commit 1f5573cfe7a7056e80a92c7a037a3e69f3a13d1c upstream.

Syzbot triggered the following warning in ovl_workdir_create() ->
ovl_create_real():

if (!err && WARN_ON(!newdentry->d_inode)) {

The reason is that the cgroup2 filesystem returns from mkdir without
instantiating the new dentry.

Weird filesystems such as this will be rejected by overlayfs at a later
stage during setup, but to prevent such a warning, call ovl_mkdir_real()
directly from ovl_workdir_create() and reject this case early.

Reported-and-tested-by: syzbot+75eab84fd0af9e8bf66b@syzkaller.appspotmail.com
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: annotate lock in fuse_reverse_inval_entry()

commit bda9a71980e083699a0360963c0135657b73f47a upstream.

Add missing inode lock annotatation; found by syzbot.

Reported-and-tested-by: syzbot+9f747458f5990eaa8d43@syzkaller.appspotmail.com
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: mxl111sf: change mutex_init() location

commit 44870a9e7a3c24acbb3f888b2a7cc22c9bdf7e7f upstream.

Syzbot reported, that mxl111sf_ctrl_msg() uses uninitialized
mutex. The problem was in wrong mutex_init() location.

Previous mutex_init(&state->msg_lock) call was in ->init() function, but
dvb_usbv2_init() has this order of calls:

dvb_usbv2_init()
  dvb_usbv2_adapter_init()
    dvb_usbv2_adapter_frontend_init()
      props->frontend_attach()

  props->init()

Since mxl111sf_* devices call mxl111sf_ctrl_msg() in ->frontend_attach()
internally we need to initialize state->msg_lock before
frontend_attach(). To achieve it, ->probe() call added to all mxl111sf_*
devices, which will simply initiaize mutex.

Reported-and-tested-by: syzbot+5ca0bf339f13c4243001@syzkaller.appspotmail.com
Fixes: 8572211842af ("[media] mxl111sf: convert to new DVB USB")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: core: Make do_proc_control() and do_proc_bulk() killable

commit ae8709b296d80c7f45aa1f35c0e7659ad69edce1 upstream.

The USBDEVFS_CONTROL and USBDEVFS_BULK ioctls invoke
usb_start_wait_urb(), which contains an uninterruptible wait with a
user-specified timeout value.  If timeout value is very large and the
device being accessed does not respond in a reasonable amount of time,
the kernel will complain about "Task X blocked for more than N
seconds", as found in testing by syzbot:

INFO: task syz-executor.0:8700 blocked for more than 143 seconds.
      Not tainted 5.14.0-rc7-syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor.0  state:D stack:23192 pid: 8700 ppid:  8455 flags:0x00004004
Call Trace:
 context_switch kernel/sched/core.c:4681 [inline]
 __schedule+0xc07/0x11f0 kernel/sched/core.c:5938
 schedule+0x14b/0x210 kernel/sched/core.c:6017
 schedule_timeout+0x98/0x2f0 kernel/time/timer.c:1857
 do_wait_for_common+0x2da/0x480 kernel/sched/completion.c:85
 __wait_for_common kernel/sched/completion.c:106 [inline]
 wait_for_common kernel/sched/completion.c:117 [inline]
 wait_for_completion_timeout+0x46/0x60 kernel/sched/completion.c:157
 usb_start_wait_urb+0x167/0x550 drivers/usb/core/message.c:63
 do_proc_bulk+0x978/0x1080 drivers/usb/core/devio.c:1236
 proc_bulk drivers/usb/core/devio.c:1273 [inline]
 usbdev_do_ioctl drivers/usb/core/devio.c:2547 [inline]
 usbdev_ioctl+0x3441/0x6b10 drivers/usb/core/devio.c:2713
...

To fix this problem, this patch replaces usbfs's calls to
usb_control_msg() and usb_bulk_msg() with special-purpose code that
does essentially the same thing (as recommended in the comment for
usb_start_wait_urb()), except that it always uses a killable wait and
it uses GFP_KERNEL rather than GFP_NOIO.

Reported-and-tested-by: syzbot+ada0f7d3d9fd2016d927@syzkaller.appspotmail.com
Suggested-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20210903175312.GA468440@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Fix extable address check.

commit 588a25e92458c6efeb7a261d5ca5726f5de89184 upstream.

The verifier checks that PTR_TO_BTF_ID pointer is either valid or NULL,
but it cannot distinguish IS_ERR pointer from valid one.

When offset is added to IS_ERR pointer it may become small positive
value which is a user address that is not handled by extable logic
and has to be checked for at the runtime.

Tighten BPF_PROBE_MEM pointer check code to prevent this case.

Fixes: 4c5de127598e ("bpf: Emit explicit NULL pointer checks for PROBE_LDX instructions.")
Reported-by: Lorenzo Fontana <lorenzo.fontana@elastic.co>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf, x64: Factor out emission of REX byte in more cases

commit 6364d7d75a0e015a405d1f8a07f267f076c36ca6 upstream.

Introduce a single reg version of maybe_emit_mod() and factor out
common code in more cases.

Signed-off-by: Jie Meng <jmeng@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211006194135.608932-1-jmeng@fb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: add missing documented NL params

commit 6813b1928758ce64fabbb8ef157f994b7c2235fa upstream.

'loc_id' and 'rem_id' are set in all events linked to subflows but those
were missing in the events description in the comments.

Fixes: b911c97c7dc7 ("mptcp: add netlink event support")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xsk: Do not sleep in poll() when need_wakeup set

commit bd0687c18e635b63233dc87f38058cd728802ab4 upstream.

Do not sleep in poll() when the need_wakeup flag is set. When this
flag is set, the application needs to explicitly wake up the driver
with a syscall (poll, recvmsg, sendmsg, etc.) to guarantee that Rx
and/or Tx processing will be processed promptly. But the current code
in poll(), sleeps first then wakes up the driver. This means that no
driver processing will occur (baring any interrupts) until the timeout
has expired.

Fix this by checking the need_wakeup flag first and if set, wake the
driver and return to the application. Only if need_wakeup is not set
should the process sleep if there is a timeout set in the poll() call.

Fixes: 77cd0d7b3f25 ("xsk: add support for need_wakeup flag in AF_XDP rings")
Reported-by: Keith Wiles <keith.wiles@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20211214102607.7677-1-magnus.karlsson@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name

commit 737e65c7956795b3553781fb7bc82fce1c39503f upstream.

According to the i.MX6ULL Reference Manual, pad CSI_DATA07 may
have the ESAI_TX0 functionality, not ESAI_T0.

Also, NXP's i.MX Config Tools 10.0 generates dtsi with the
MX6ULL_PAD_CSI_DATA07__ESAI_TX0 naming, so fix it accordingly.

There are no devicetree users in mainline that use the old name,
so just remove the old entry.

Fixes: c201369d4aa5 ("ARM: dts: imx6ull: add imx6ull support")
Reported-by: George Makarov <georgemakarov1@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: m_can: pci: use custom bit timings for Elkhart Lake

commit ea4c1787685dbf9842046f05b6390b6901ee6ba2 upstream.

The relevant datasheet [1] specifies nonstandard limits for the bit timing
parameters. While it is unclear what the exact effect of violating these
limits is, it seems like a good idea to adhere to the documentation.

[1] Intel Atom® x6000E Series, and Intel® Pentium® and Celeron® N and J
    Series Processors for IoT Applications Datasheet,
    Volume 2 (Book 3 of 3), July 2021, Revision 001

Fixes: cab7ffc0324f ("can: m_can: add PCI glue driver for Intel Elkhart Lake")
Link: https://lore.kernel.org/all/9eba5d7c05a48ead4024ffa6e5926f191d8c6b38.1636967198.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: m_can: make custom bittiming fields const

commit ea22ba40debee29ee7257c42002409899e9311c1 upstream.

The assigned timing structs will be defined a const anyway, so we can
avoid a few casts by declaring the struct fields as const as well.

Link: https://lore.kernel.org/all/4508fa4e639164b2584c49a065d90c78a91fa568.1636967198.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "can: m_can: remove support for custom bit timing"

commit ea768b2ffec6cc9c3e17c37ef75d0539b8f89ff5 upstream.

The timing limits specified by the Elkhart Lake CPU datasheets do not
match the defaults. Let's reintroduce the support for custom bit timings.

This reverts commit 0ddd83fbebbc5537f9d180d31f659db3564be708.

Link: https://lore.kernel.org/all/00c9e2596b1a548906921a574d4ef7a03c0dace0.1636967198.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pm: fix reading SMU FW version from amdgpu_firmware_info on YC

commit dcd10d879a9d1d4e929d374c2f24aba8fac3252b upstream.

This value does not get cached into adev->pm.fw_version during
startup for smu13 like it does for other SMU like smu12.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: don't override default ECO_BITs setting

commit 841933d5b8aa853abe68e63827f68f50fab37226 upstream.

Leave this bit as hardware default setting

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>