qede: fix offload for IPIP tunnel packets

[ Upstream commit 5d5647dad259bb416fd5d3d87012760386d97530 ]

IPIP tunnels packets are unknown to device,
hence these packets are incorrectly parsed and
caused the packet corruption, so disable offlods
for such packets at run time.

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://lore.kernel.org/r/20201221145530.7771-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ethernet: mvneta: Fix error handling in mvneta_probe

[ Upstream commit 58f60329a6be35a5653edb3fd2023ccef9eb9943 ]

When mvneta_port_power_up() fails, we should execute
cleanup functions after label err_netdev to avoid memleak.

Fixes: 41c2b6b4f0f80 ("net: ethernet: mvneta: Add back interface mode validation")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20201220082930.21623-1-dinghao.liu@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ibmvnic: continue fatal error reset after passive init

[ Upstream commit 1f45dc22066797479072978feeada0852502e180 ]

Commit f9c6cea0b385 ("ibmvnic: Skip fatal error reset after passive init")
says "If the passive
CRQ initialization occurs before the FATAL reset task is processed,
the FATAL error reset task would try to access a CRQ message queue
that was freed, causing an oops. The problem may be most likely to
occur during DLPAR add vNIC with a non-default MTU, because the DLPAR
process will automatically issue a change MTU request.
Fix this by not processing fatal error reset if CRQ is passively
initialized after client-driven CRQ initialization fails."

Even with this commit, we still see similar kernel crashes. In order
to completely solve this problem, we'd better continue the fatal error
reset, capture the kernel crash, and try to fix it from that end.

Fixes: f9c6cea0b385 ("ibmvnic: Skip fatal error reset after passive init")
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Link: https://lore.kernel.org/r/20201219214034.21123-1-ljp@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ibmvnic: fix login buffer memory leak

[ Upstream commit a0c8be56affa7d5ffbdec24c992223be54db3b6e ]

Commit 34f0f4e3f488 ("ibmvnic: Fix login buffer memory leaks") frees
login_rsp_buffer in release_resources() and send_login()
because handle_login_rsp() does not free it.
Commit f3ae59c0c015 ("ibmvnic: store RX and TX subCRQ handle array in
ibmvnic_adapter struct") frees login_rsp_buffer in handle_login_rsp().
It seems unnecessary to free it in release_resources() and send_login().
There are chances that handle_login_rsp returns earlier without freeing
buffers. Double-checking the buffer is harmless since
release_login_buffer and release_login_rsp_buffer will
do nothing if buffer is already freed.

Fixes: f3ae59c0c015 ("ibmvnic: store RX and TX subCRQ handle array in ibmvnic_adapter struct")
Fixes: 34f0f4e3f488 ("ibmvnic: Fix login buffer memory leaks")
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Link: https://lore.kernel.org/r/20201219213919.21045-1-ljp@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: dwmac-meson8b: ignore the second clock input

[ Upstream commit f87777a3c30cf50c66a20e1d153f0e003bb30774 ]

The dwmac glue registers on Amlogic Meson8b and newer SoCs has two clock
inputs:
- Meson8b and Meson8m2: MPLL2 and MPLL2 (the same parent is wired to
  both inputs)
- GXBB, GXL, GXM, AXG, G12A, G12B, SM1: FCLK_DIV2 and MPLL2

All known vendor kernels and u-boots are using the first input only. We
let the common clock framework automatically choose the "right" parent.
For some boards this causes a problem though, specificially with G12A and
newer SoCs. The clock input is used for generating the 125MHz RGMII TX
clock. For the two input clocks this means on G12A:
- FCLK_DIV2: 999999985Hz / 8 = 124999998.125Hz
- MPLL2: 499999993Hz / 4 = 124999998.25Hz

In theory MPLL2 is the "better" clock input because it's gets us 0.125Hz
closer to the requested frequency than FCLK_DIV2. In reality however
there is a resource conflict because MPLL2 is needed to generate some of
the audio clocks. dwmac-meson8b probes first and sets up the clock tree
with MPLL2. This works fine until the audio driver comes and "steals"
the MPLL2 clocks and configures it with it's own rate (294909637Hz). The
common clock framework happily changes the MPLL2 rate but does not
reconfigure our RGMII TX clock tree, which then ends up at 73727409Hz,
which is more than 40% off the requested 125MHz.

Don't use the second clock input for now to force the common clock
framework to always select the first parent. This mimics the behavior
from the vendor driver and fixes the clock resource conflict with the
audio driver on G12A boards. Once the common clock framework can handle
this situation this change can be reverted again.

Fixes: 566e8251625304 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC")
Reported-by: Thomas Graichen <thomas.graichen@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: thomas graichen <thomas.graichen@gmail.com>
Link: https://lore.kernel.org/r/20201219135036.3216017-1-martin.blumenstingl@googlemail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mvpp2: Fix GoP port 3 Networking Complex Control configurations

[ Upstream commit 2575bc1aa9d52a62342b57a0b7d0a12146cf6aed ]

During GoP port 2 Networking Complex Control mode of operation configurations,
also GoP port 3 mode of operation was wrongly set.
Patch removes these configurations.

Fixes: f84bf386f395 ("net: mvpp2: initialize the GoP")
Acked-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Link: https://lore.kernel.org/r/1608462149-1702-1-git-send-email-stefanc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

atm: idt77252: call pci_disable_device() on error path

[ Upstream commit 8df66af5c1e5f80562fe728db5ec069b21810144 ]

This error path needs to disable the pci device before returning.

Fixes: ede58ef28e10 ("atm: remove deprecated use of pci api")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X93dmC4NX0vbTpGp@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ionic: account for vlan tag len in rx buffer len

[ Upstream commit 83469893204281ecf65d572bddf02de29a19787c ]

Let the FW know we have enough receive buffer space for the
vlan tag if it isn't stripped.

Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Link: https://lore.kernel.org/r/20201218215001.64696-1-snelson@pensando.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ethernet: ucc_geth: set dev->max_mtu to 1518

[ Upstream commit 1385ae5c30f238f81bc6528d897c6d7a0816783f ]

All the buffers and registers are already set up appropriately for an
MTU slightly above 1500, so we just need to expose this to the
networking stack. AFAICT, there's no need to implement .ndo_change_mtu
when the receive buffers are always set up to support the max_mtu.

This fixes several warnings during boot on our mpc8309-board with an
embedded mv88e6250 switch:

mv88e6085 mdio@e0102120:10: nonfatal error -34 setting MTU 1500 on port 0
...
mv88e6085 mdio@e0102120:10: nonfatal error -34 setting MTU 1500 on port 4
ucc_geth e0102000.ethernet eth1: error -22 setting MTU to 1504 to include DSA overhead

The last line explains what the DSA stack tries to do: achieving an MTU
of 1500 on-the-wire requires that the master netdevice connected to
the CPU port supports an MTU of 1500+the tagging overhead.

Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ethernet: ucc_geth: fix use-after-free in ucc_geth_remove()

[ Upstream commit e925e0cd2a705aaacb0b907bb3691fcac3a973a4 ]

ugeth is the netdiv_priv() part of the netdevice. Accessing the memory
pointed to by ugeth (such as done by ucc_geth_memclean() and the two
of_node_puts) after free_netdev() is thus use-after-free.

Fixes: 80a9fad8e89a ("ucc_geth: fix module removal")
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: systemport: set dev->max_mtu to UMAC_MAX_MTU_SIZE

[ Upstream commit 54ddbdb024882e226055cc4c3c246592ddde2ee5 ]

The driver is already allocating receive buffers of 2KiB and the
Ethernet MAC is configured to accept frames up to UMAC_MAX_MTU_SIZE.

Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20201218173843.141046-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mvpp2: prs: fix PPPoE with ipv6 packet parse

[ Upstream commit fec6079b2eeab319d9e3d074f54d3b6f623e9701 ]

Current PPPoE+IPv6 entry is jumping to 'next-hdr'
field and not to 'DIP' field as done for IPv4.

Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Reported-by: Liron Himi <lironh@marvell.com>
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Link: https://lore.kernel.org/r/1608230266-22111-1-git-send-email-stefanc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mvpp2: Add TCAM entry to drop flow control pause frames

[ Upstream commit 3f48fab62bb81a7f9d01e9d43c40395fad011dd5 ]

Issue:
Flow control frame used to pause GoP(MAC) was delivered to the CPU
and created a load on the CPU. Since XOFF/XON frames are used only
by MAC, these frames should be dropped inside MAC.

Fix:
According to 802.3-2012 - IEEE Standard for Ethernet pause frame
has unique destination MAC address 01-80-C2-00-00-01.
Add TCAM parser entry to track and drop pause frames by destination MAC.

Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Link: https://lore.kernel.org/r/1608229817-21951-1-git-send-email-stefanc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sched: sch_taprio: ensure to reset/destroy all child qdiscs

[ Upstream commit 698285da79f5b0b099db15a37ac661ac408c80eb ]

taprio_graft() can insert a NULL element in the array of child qdiscs. As
a consquence, taprio_reset() might not reset child qdiscs completely, and
taprio_destroy() might leak resources. Fix it by ensuring that loops that
iterate over q->qdiscs[] don't end when they find the first NULL item.

Fixes: 44d4775ca518 ("net/sched: sch_taprio: reset child qdiscs before freeing them")
Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/13edef6778fef03adc751582562fba4a13e06d6a.1608240532.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iavf: fix double-release of rtnl_lock

[ Upstream commit f1340265726e0edf8a8cef28e665b28ad6302ce9 ]

This code does not jump to exit on an error in iavf_lan_add_device(),
so the rtnl_unlock() from the normal path will follow.

Fixes: b66c7bc1cd4d ("iavf: Refactor init state machine")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40e: Fix Error I40E_AQ_RC_EINVAL when removing VFs

[ Upstream commit 3ac874fa84d1baaf0c0175f2a1499f5d88d528b2 ]

When removing VFs for PF added to bridge there was
an error I40E_AQ_RC_EINVAL. It was caused by not properly
resetting and reinitializing PF when adding/removing VFs.
Changed how reset is performed when adding/removing VFs
to properly reinitialize PFs VSI.

Fixes: fc60861e9b00 ("i40e: start up in VEPA mode by default")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.10.6

Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210107143052.392839477@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mwifiex: Fix possible buffer overflows in mwifiex_cmd_802_11_ad_hoc_start

[ Upstream commit 5c455c5ab332773464d02ba17015acdca198f03d ]

mwifiex_cmd_802_11_ad_hoc_start() calls memcpy() without checking
the destination size may trigger a buffer overflower,
which a local user could use to cause denial of service
or the execution of arbitrary code.
Fix it by putting the length check before calling memcpy().

Signed-off-by: Zhang Xiaohui <ruc_zhangxiaohui@163.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201206084801.26479-1-ruc_zhangxiaohui@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

exec: Transform exec_update_mutex into a rw_semaphore

[ Upstream commit f7cfd871ae0c5008d94b6f66834e7845caa93c15 ]

Recently syzbot reported[0] that there is a deadlock amongst the users
of exec_update_mutex.  The problematic lock ordering found by lockdep
was:

   perf_event_open  (exec_update_mutex -> ovl_i_mutex)
   chown            (ovl_i_mutex       -> sb_writes)
   sendfile         (sb_writes         -> p->lock)
     by reading from a proc file and writing to overlayfs
   proc_pid_syscall (p->lock           -> exec_update_mutex)

While looking at possible solutions it occured to me that all of the
users and possible users involved only wanted to state of the given
process to remain the same.  They are all readers.  The only writer is
exec.

There is no reason for readers to block on each other.  So fix
this deadlock by transforming exec_update_mutex into a rw_semaphore
named exec_update_lock that only exec takes for writing.

Cc: Jann Horn <jannh@google.com>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Bernd Edlinger <bernd.edlinger@hotmail.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Christopher Yeoh <cyeoh@au1.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Fixes: eea9673250db ("exec: Add exec_update_mutex to replace cred_guard_mutex")
[0] https://lkml.kernel.org/r/00000000000063640c05ade8e3de@google.com
Reported-by: syzbot+db9cdf3dd1f64252c6ef@syzkaller.appspotmail.com
Link: https://lkml.kernel.org/r/87ft4mbqen.fsf@x220.int.ebiederm.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rwsem: Implement down_read_interruptible

[ Upstream commit 31784cff7ee073b34d6eddabb95e3be2880a425c ]

In preparation for converting exec_update_mutex to a rwsem so that
multiple readers can execute in parallel and not deadlock, add
down_read_interruptible.  This is needed for perf_event_open to be
converted (with no semantic changes) from working on a mutex to
wroking on a rwsem.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/87k0tybqfy.fsf@x220.int.ebiederm.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

rwsem: Implement down_read_killable_nested

[ Upstream commit 0f9368b5bf6db0c04afc5454b1be79022a681615 ]

In preparation for converting exec_update_mutex to a rwsem so that
multiple readers can execute in parallel and not deadlock, add
down_read_killable_nested.  This is needed so that kcmp_lock
can be converted from working on a mutexes to working on rw_semaphores.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/87o8jabqh3.fsf@x220.int.ebiederm.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf: Break deadlock involving exec_update_mutex

[ Upstream commit 78af4dc949daaa37b3fcd5f348f373085b4e858f ]

Syzbot reported a lock inversion involving perf. The sore point being
perf holding exec_update_mutex() for a very long time, specifically
across a whole bunch of filesystem ops in pmu::event_init() (uprobes)
and anon_inode_getfile().

This then inverts against procfs code trying to take
exec_update_mutex.

Move the permission checks later, such that we need to hold the mutex
over less code.

Reported-by: syzbot+db9cdf3dd1f64252c6ef@syzkaller.appspotmail.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fuse: fix bad inode

[ Upstream commit 5d069dbe8aaf2a197142558b6fb2978189ba3454 ]

Jan Kara's analysis of the syzbot report (edited):

  The reproducer opens a directory on FUSE filesystem, it then attaches
  dnotify mark to the open directory.  After that a fuse_do_getattr() call
  finds that attributes returned by the server are inconsistent, and calls
  make_bad_inode() which, among other things does:

          inode->i_mode = S_IFREG;

  This then confuses dnotify which doesn't tear down its structures
  properly and eventually crashes.

Avoid calling make_bad_inode() on a live inode: switch to a private flag on
the fuse inode.  Also add the test to ops which the bad_inode_ops would
have caught.

This bug goes back to the initial merge of fuse in 2.6.14...

Reported-by: syzbot+f427adf9324b92652ccc@syzkaller.appspotmail.com
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Tested-by: Jan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/siw,rxe: Make emulated devices virtual in the device tree

[ Upstream commit a9d2e9ae953f0ddd0327479c81a085adaa76d903 ]

This moves siw and rxe to be virtual devices in the device tree:

lrwxrwxrwx 1 root root 0 Nov  6 13:55 /sys/class/infiniband/rxe0 -> ../../devices/virtual/infiniband/rxe0/

Previously they were trying to parent themselves to the physical device of
their attached netdev, which doesn't make alot of sense.

My hope is this will solve some weird syzkaller hits related to sysfs as
it could be possible that the parent of a netdev is another netdev, eg
under bonding or some other syzkaller found netdev configuration.

Nesting a ib_device under anything but a physical device is going to cause
inconsistencies in sysfs during destructions.

Link: https://lore.kernel.org/r/0-v1-dcbfc68c4b4a+d6-virtual_dev_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/core: remove use of dma_virt_ops

[ Upstream commit 5a7a9e038b032137ae9c45d5429f18a2ffdf7d42 ]

Use the ib_dma_* helpers to skip the DMA translation instead.  This
removes the last user if dma_virt_ops and keeps the weird layering
violation inside the RDMA core instead of burderning the DMA mapping
subsystems with it.  This also means the software RDMA drivers now don't
have to mess with DMA parameters that are not relevant to them at all, and
that in the future we can use PCI P2P transfers even for software RDMA, as
there is no first fake layer of DMA mapping that the P2P DMA support.

Link: https://lore.kernel.org/r/20201106181941.1878556-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: Re-enable WriteBooster after device reset

[ Upstream commit bd14bf0e4a084514aa62d24d2109e0f09a93822f ]

UFS 3.1 specification mentions that the WriteBooster flags listed below
will be set to their default values, i.e. disabled, after power cycle or
any type of reset event. Thus we need to reset the flag variables kept in
struct hba to align with the device status and ensure that
WriteBooster-related functions are configured properly after device reset.

Without this fix, WriteBooster will not be enabled successfully after by
ufshcd_wb_ctrl() after device reset because hba->wb_enabled remains true.

Flags required to be reset to default values:

 - fWriteBoosterEn: hba->wb_enabled

 - fWriteBoosterBufferFlushEn: hba->wb_buf_flush_enabled

 - fWriteBoosterBufferFlushDuringHibernate: No variable mapped

Link: https://lore.kernel.org/r/20201208135635.15326-2-stanley.chu@mediatek.com
Fixes: 3d17b9b5ab11 ("scsi: ufs: Add write booster feature support")
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: Allow an error return value from ->device_reset()

[ Upstream commit 151f1b664ffbb847c7fbbce5a5b8580f1b9b1d98 ]

It is simpler for drivers to provide a ->device_reset() callback
irrespective of whether the GPIO, or firmware interface necessary to do the
reset, is discovered during probe.

Change ->device_reset() to return an error code.  Drivers that provide the
callback, but do not do the reset operation should return -EOPNOTSUPP.

Link: https://lore.kernel.org/r/20201103141403.2142-3-adrian.hunter@intel.com
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bean huo <beanhuo@micron.com>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/tgl: Fix Combo PHY DPLL fractional divider for 38.4MHz ref clock

commit 0e2497e334de42dbaaee8e325241b5b5b34ede7e upstream.

Apply Display WA #22010492432 for combo PHY PLLs too. This should fix a
problem where the PLL output frequency is slightly off with the current
PLL fractional divider value.

I haven't seen an actual case where this causes a problem, but let's
follow the spec. It's also needed on some EHL platforms, but for that we
also need a way to distinguish the affected EHL SKUs, so I leave that
for a follow-up.

v2:
- Apply the WA at one place when calculating the PLL dividers from the
  frequency and the frequency from the dividers for all the combo PLL
  use cases (DP, HDMI, TBT). (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201003001846.1271151-6-imre.deak@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/hdmi: Fix incorrect mutex unlock in silent_stream_disable()

commit 3d5c5fdcee0f9a94deb0472e594706018b00aa31 upstream.

The silent_stream_disable() function introduced by the commit
b1a5039759cb ("ALSA: hda/hdmi: fix silent stream for first playback to
DP") takes the per_pin->lock mutex, but it unlocks the wrong one,
spec->pcm_lock, which causes a deadlock.  This patch corrects it.

Fixes: b1a5039759cb ("ALSA: hda/hdmi: fix silent stream for first playback to DP")
Reported-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: <stable@vger.kernel.org>
Acked-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210101083852.12094-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Modify Dell platform name

commit c1e8952395c1f44a6304c71401519d19ed2ac56a upstream.

Dell platform SSID:0x0a58 change platform name.
Use the generic name instead for avoiding confusion.

Fixes: 150927c3674d ("ALSA: hda/realtek - Supported Dell fixed type headset")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/efe7c196158241aa817229df7835d645@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Fix attempting to set RPA timeout when unsupported

commit a31489d2a368d2f9225ed6a6f595c63bc7d10de8 upstream.

During controller initialization, an LE Set RPA Timeout command is sent
to the controller if supported. However, the value checked to determine
if the command is supported is incorrect. Page 1921 of the Bluetooth
Core Spec v5.2 shows that bit 2 of octet 35 of the Supported_Commands
field corresponds to the LE Set RPA Timeout command, but currently
bit 6 of octet 35 is checked. This patch checks the correct value
instead.

This issue led to the error seen in the following btmon output during
initialization of an adapter (rtl8761b) and prevented initialization
from completing.

< HCI Command: LE Set Resolvable Private Address Timeout (0x08|0x002e) plen 2
        Timeout: 900 seconds
> HCI Event: Command Complete (0x0e) plen 4
      LE Set Resolvable Private Address Timeout (0x08|0x002e) ncmd 2
        Status: Unsupported Remote Feature / Unsupported LMP Feature (0x1a)
= Close Index: 00:E0:4C:6B:E5:03

The error did not appear when running with this patch.

Signed-off-by: Edward Vear <edwardvear@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kdev_t: always inline major/minor helper functions

commit aa8c7db494d0a83ecae583aa193f1134ef25d506 upstream.

Silly GCC doesn't always inline these trivial functions.

Fixes the following warning:

  arch/x86/kernel/sys_ia32.o: warning: objtool: cp_stat64()+0xd8: call to new_encode_dev() with UACCESS enabled

Link: https://lkml.kernel.org/r/984353b44a4484d86ba9f73884b7306232e25e30.1608737428.git.jpoimboe@redhat.com
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> [build-tested]
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: rtc: add reset-source property

commit 320d159e2d63a97a40f24cd6dfda5a57eec65b91 upstream.

Some RTCs, e.g. the pcf2127, can be used as a hardware watchdog. But
if the reset pin is not actually wired up, the driver exposes a
watchdog device that doesn't actually work.

Provide a standard binding that can be used to indicate that a given
RTC can perform a reset of the machine, similar to wakeup-source.

Suggested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201218101054.25416-2-rasmus.villemoes@prevas.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: pcf2127: only use watchdog when explicitly available

commit 71ac13457d9d1007effde65b54818106b2c2b525 upstream.

Most boards using the pcf2127 chip (in my bubble) don't make use of the
watchdog functionality and the respective output is not connected. The
effect on such a board is that there is a watchdog device provided that
doesn't work.

So only register the watchdog if the device tree has a "reset-source"
property.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
[RV: s/has-watchdog/reset-source/]
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201218101054.25416-3-rasmus.villemoes@prevas.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: pcf2127: move watchdog initialisation to a separate function

commit 5d78533a0c53af9659227c803df944ba27cd56e0 upstream.

The obvious advantages are:

 - The linker can drop the watchdog functions if CONFIG_WATCHDOG is off.
 - All watchdog stuff grouped together with only a single function call
   left in generic code.
 - Watchdog register is only read when it is actually used.
 - Less #ifdefery

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200924105256.18162-2-u.kleine-koenig@pengutronix.de
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "mtd: spinand: Fix OOB read"

This reverts stable commit baad618d078c857f99cc286ea249e9629159901f.

This commit is adding lines to spinand_write_to_cache_op, wheras the upstream
commit 868cbe2a6dcee451bd8f87cbbb2a73cf463b57e5 that this was supposed to
backport was touching spinand_read_from_cache_op.
It causes a crash on writing OOB data by attempting to write to read-only
kernel memory.

Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "drm/amd/display: Fix memory leaks in S3 resume"

This reverts commit a135a1b4c4db1f3b8cbed9676a40ede39feb3362.

This leads to blank screens on some boards after replugging a
display.  Revert until we understand the root cause and can
fix both the leak and the blank screen after replug.

Cc: Stylon Wang <stylon.wang@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Andre Tomt <andre@tomt.net>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.10.5

Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210104155708.800470590@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

device-dax: Fix range release

[ Upstream commit 6268d7da4d192af339f4d688942b9ccb45a65e04 ]

There are multiple locations that open-code the release of the last
range in a device-dax instance. Consolidate this into a new
dev_dax_trim_range() helper.

This also addresses a kmemleak report:

# cat /sys/kernel/debug/kmemleak
[..]
unreferenced object 0xffff976bd46f6240 (size 64):
   comm "ndctl", pid 23556, jiffies 4299514316 (age 5406.733s)
   hex dump (first 32 bytes):
     00 00 00 00 00 00 00 00 00 00 20 c3 37 00 00 00  .......... .7...
     ff ff ff 7f 38 00 00 00 00 00 00 00 00 00 00 00  ....8...........
   backtrace:
     [<00000000064003cf>] __kmalloc_track_caller+0x136/0x379
     [<00000000d85e3c52>] krealloc+0x67/0x92
     [<00000000d7d3ba8a>] __alloc_dev_dax_range+0x73/0x25c
     [<0000000027d58626>] devm_create_dev_dax+0x27d/0x416
     [<00000000434abd43>] __dax_pmem_probe+0x1c9/0x1000 [dax_pmem_core]
     [<0000000083726c1c>] dax_pmem_probe+0x10/0x1f [dax_pmem]
     [<00000000b5f2319c>] nvdimm_bus_probe+0x9d/0x340 [libnvdimm]
     [<00000000c055e544>] really_probe+0x230/0x48d
     [<000000006cabd38e>] driver_probe_device+0x122/0x13b
     [<0000000029c7b95a>] device_driver_attach+0x5b/0x60
     [<0000000053e5659b>] bind_store+0xb7/0xc3
     [<00000000d3bdaadc>] drv_attr_store+0x27/0x31
     [<00000000949069c5>] sysfs_kf_write+0x4a/0x57
     [<000000004a8b5adf>] kernfs_fop_write+0x150/0x1e5
     [<00000000bded60f0>] __vfs_write+0x1b/0x34
     [<00000000b92900f0>] vfs_write+0xd8/0x1d1

Reported-by: Jane Chu <jane.chu@oracle.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/160834570161.1791850.14911670304441510419.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: avoid s_mb_prefetch to be zero in individual scenarios

[ Upstream commit 82ef1370b0c1757ab4ce29f34c52b4e93839b0aa ]

Commit cfd732377221 ("ext4: add prefetching for block allocation
bitmaps") introduced block bitmap prefetch, and expects to read block
bitmaps of flex_bg through an IO.  However, it seems to ignore the
value range of s_log_groups_per_flex.  In the scenario where the value
of s_log_groups_per_flex is greater than 27, s_mb_prefetch or
s_mb_prefetch_limit will overflow, cause a divide zero exception.

In addition, the logic of calculating nr is also flawed, because the
size of flexbg is fixed during a single mount, but s_mb_prefetch can
be modified, which causes nr to fail to meet the value condition of
[1, flexbg_size].

To solve this problem, we need to set the upper limit of
s_mb_prefetch.  Since we expect to load block bitmaps of a flex_bg
through an IO, we can consider determining a reasonable upper limit
among the IO limit parameters.  After consideration, we chose
BLK_MAX_SEGMENT_SIZE.  This is a good choice to solve divide zero
problem and avoiding performance degradation.

[ Some minor code simplifications to make the changes easy to follow -- TYT ]

Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Samuel Liao <samuelliao@tencent.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/1607051143-24508-1-git-send-email-brookxu@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm verity: skip verity work if I/O error when system is shutting down

[ Upstream commit 252bd1256396cebc6fc3526127fdb0b317601318 ]

If emergency system shutdown is called, like by thermal shutdown,
a dm device could be alive when the block device couldn't process
I/O requests anymore. In this state, the handling of I/O errors
by new dm I/O requests or by those already in-flight can lead to
a verity corruption state, which is a misjudgment.

So, skip verity work in response to I/O error when system is shutting
down.

Signed-off-by: Hyeongseok Kim <hyeongseok@gmail.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: pcm: Clear the full allocated memory at hw_params

[ Upstream commit 618de0f4ef11acd8cf26902e65493d46cc20cc89 ]

The PCM hw_params core function tries to clear up the PCM buffer
before actually using for avoiding the information leak from the
previous usages or the usage before a new allocation.  It performs the
memset() with runtime->dma_bytes, but this might still leave some
remaining bytes untouched; namely, the PCM buffer size is aligned in
page size for mmap, hence runtime->dma_bytes doesn't necessarily cover
all PCM buffer pages, and the remaining bytes are exposed via mmap.

This patch changes the memory clearance to cover the all buffer pages
if the stream is supposed to be mmap-ready (that guarantees that the
buffer size is aligned in page size).

Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20201218145625.2045-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: remove racy overflow list fast checks

[ Upstream commit 9cd2be519d05ee78876d55e8e902b7125f78b74f ]

list_empty_careful() is not racy only if some conditions are met, i.e.
no re-adds after del_init. io_cqring_overflow_flush() does list_move(),
so it's actually racy.

Remove those checks, we have ->cq_check_overflow for the fast path.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390: always clear kernel stack backchain before calling functions

[ Upstream commit 9365965db0c7ca7fc81eee27c21d8522d7102c32 ]

Clear the kernel stack backchain before potentially calling the
lockdep trace_hardirqs_off/on functions. Without this walking the
kernel backchain, e.g. during a panic, might stop too early.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tick/sched: Remove bogus boot "safety" check

[ Upstream commit ba8ea8e7dd6e1662e34e730eadfc52aa6816f9dd ]

can_stop_idle_tick() checks whether the do_timer() duty has been taken over
by a CPU on boot. That's silly because the boot CPU always takes over with
the initial clockevent device.

But even if no CPU would have installed a clockevent and taken over the
duty then the question whether the tick on the current CPU can be stopped
or not is moot. In that case the current CPU would have no clockevent
either, so there would be nothing to keep ticking.

Remove it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20201206212002.725238293@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: updated wm table for Renoir

[ Upstream commit 410066d24cfc1071be25e402510367aca9db5cb6 ]

[Why]
For certain timings, Renoir may underflow due to sr exit
latency being too slow.

[How]
Updated wm table for renoir.

Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: fix inode refcount leak when ceph_fill_inode on non-I_NEW inode fails

[ Upstream commit 68cbb8056a4c24c6a38ad2b79e0a9764b235e8fa ]

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.2: Don't error when exiting early on a READ_PLUS buffer overflow

[ Upstream commit 503b934a752f7e789a5f33217520e0a79f3096ac ]

Expanding the READ_PLUS extents can cause the read buffer to overflow.
If it does, then don't error, but just exit early.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: ubd: Submit all data segments atomically

[ Upstream commit fc6b6a872dcd48c6f39c7975836d75113db67d37 ]

Internally, UBD treats each physical IO segment as a separate command to
be submitted in the execution pipe.  If the pipe returns a transient
error after a few segments have already been written, UBD will tell the
block layer to requeue the request, but there is no way to reclaim the
segments already submitted.  When a new attempt to dispatch the request
is done, those segments already submitted will get duplicated, causing
the WARN_ON below in the best case, and potentially data corruption.

In my system, running a UML instance with 2GB of RAM and a 50M UBD disk,
I can reproduce the WARN_ON by simply running mkfs.fvat against the
disk on a freshly booted system.

There are a few ways to around this, like reducing the pressure on
the pipe by reducing the queue depth, which almost eliminates the
occurrence of the problem, increasing the pipe buffer size on the host
system, or by limiting the request to one physical segment, which causes
the block layer to submit way more requests to resolve a single
operation.

Instead, this patch modifies the format of a UBD command, such that all
segments are sent through a single element in the communication pipe,
turning the command submission atomic from the point of view of the
block layer.  The new format has a variable size, depending on the
number of elements, and looks like this:

+------------+-----------+-----------+------------
| cmd_header | segment 0 | segment 1 | segment ...
+------------+-----------+-----------+------------

With this format, we push a pointer to cmd_header in the submission
pipe.

This has the advantage of reducing the memory footprint of executing a
single request, since it allow us to merge some fields in the header.
It is possible to reduce even further each segment memory footprint, by
merging bitmap_words and cow_offset, for instance, but this is not the
focus of this patch and is left as future work.  One issue with the
patch is that for a big number of segments, we now perform one big
memory allocation instead of multiple small ones, but I wasn't able to
trigger any real issues or -ENOMEM because of this change, that wouldn't
be reproduced otherwise.

This was tested using fio with the verify-crc32 option, and by running
an ext4 filesystem over this UBD device.

The original WARN_ON was:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at lib/refcount.c:28 refcount_warn_saturate+0x13f/0x141
refcount_t: underflow; use-after-free.
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.5.0-rc6-00002-g2a5bb2cf75c8 #346
Stack:
 6084eed0 6063dc77 00000009 6084ef60
 00000000 604b8d9f 6084eee0 6063dcbc
 6084ef40 6006ab8d e013d780 1c00000000
Call Trace:
 [<600a0c1c>] ? printk+0x0/0x94
 [<6004a888>] show_stack+0x13b/0x155
 [<6063dc77>] ? dump_stack_print_info+0xdf/0xe8
 [<604b8d9f>] ? refcount_warn_saturate+0x13f/0x141
 [<6063dcbc>] dump_stack+0x2a/0x2c
 [<6006ab8d>] __warn+0x107/0x134
 [<6008da6c>] ? wake_up_process+0x17/0x19
 [<60487628>] ? blk_queue_max_discard_sectors+0x0/0xd
 [<6006b05f>] warn_slowpath_fmt+0xd1/0xdf
 [<6006af8e>] ? warn_slowpath_fmt+0x0/0xdf
 [<600acc14>] ? raw_read_seqcount_begin.constprop.0+0x0/0x15
 [<600619ae>] ? os_nsecs+0x1d/0x2b
 [<604b8d9f>] refcount_warn_saturate+0x13f/0x141
 [<6048bc8f>] refcount_sub_and_test.constprop.0+0x2f/0x37
 [<6048c8de>] blk_mq_free_request+0xf1/0x10d
 [<6048ca06>] __blk_mq_end_request+0x10c/0x114
 [<6005ac0f>] ubd_intr+0xb5/0x169
 [<600a1a37>] __handle_irq_event_percpu+0x6b/0x17e
 [<600a1b70>] handle_irq_event_percpu+0x26/0x69
 [<600a1bd9>] handle_irq_event+0x26/0x34
 [<600a1bb3>] ? handle_irq_event+0x0/0x34
 [<600a5186>] ? unmask_irq+0x0/0x37
 [<600a57e6>] handle_edge_irq+0xbc/0xd6
 [<600a131a>] generic_handle_irq+0x21/0x29
 [<60048f6e>] do_IRQ+0x39/0x54
 [...]
---[ end trace c6e7444e55386c0f ]---

Cc: Christopher Obbard <chris.obbard@collabora.com>
Reported-by: Martyn Welch <martyn@collabora.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: random: Register random as hwrng-core device

[ Upstream commit 72d3e093afae79611fa38f8f2cfab9a888fe66f2 ]

The UML random driver creates a dummy device under the guest,
/dev/hw_random. When this file is read from the guest, the driver
reads from the host machine's /dev/random, in-turn reading from
the host kernel's entropy pool. This entropy pool could have been
filled by a hardware random number generator or just the host
kernel's internal software entropy generator.

Currently the driver does not fill the guests kernel entropy pool,
this requires a userspace tool running inside the guest (like
rng-tools) to read from the dummy device provided by this driver,
which then would fill the guest's internal entropy pool.

This all seems quite pointless when we are already reading from an
entropy pool, so this patch aims to register the device as a hwrng
device using the hwrng-core framework. This not only improves and
cleans up the driver, but also fills the guest's entropy pool
without having to resort to using extra userspace tools in the guest.

This is typically a nuisance when booting a guest: the random pool
takes a long time (~200s) to build up enough entropy since the dummy
hwrng is not used to fill the guest's pool.

This port was originally attempted by Alexander Neville "dark" (in CC,
discussion in Link), but the conversation there stalled since the
handling of -EAGAIN errors were no removed and longer handled by the
driver. This patch attempts to use the existing method of error
handling but utilises the new hwrng core.

The issue can be noticed when booting a UML guest:

    [    2.560000] random: fast init done
    [  214.000000] random: crng init done

With the patch applied, filling the pool becomes a lot quicker:

    [    2.560000] random: fast init done
    [   12.000000] random: crng init done

Cc: Alexander Neville <dark@volatile.bz>
Link: https://lore.kernel.org/lkml/20190828204609.02a7ff70@TheDarkness/
Link: https://lore.kernel.org/lkml/20190829135001.6a5ff940@TheDarkness.local/
Cc: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: rti-wdt: fix reference leak in rti_wdt_probe

[ Upstream commit 8711071e9700b67045fe5518161d63f7a03e3c9e ]

pm_runtime_get_sync() will increment pm usage counter even it
failed. Forgetting to call pm_runtime_put_noidle will result
in reference leak in rti_wdt_probe, so we should fix it.

Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20201030154909.100023-1-zhangqilong3@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/namespace.c: WARN if mnt_count has become negative

[ Upstream commit edf7ddbf1c5eb98b720b063b73e20e8a4a1ce673 ]

Missing calls to mntget() (or equivalently, too many calls to mntput())
are hard to detect because mntput() delays freeing mounts using
task_work_add(), then again using call_rcu().  As a result, mnt_count
can often be decremented to -1 without getting a KASAN use-after-free
report.  Such cases are still bugs though, and they point to real
use-after-frees being possible.

For an example of this, see the bug fixed by commit 1b0b9cc8d379
("vfs: fsmount: add missing mntget()"), discussed at
https://lkml.kernel.org/linux-fsdevel/20190605135401.GB30925@xxxxxxxxxxxxxxxxxxxxxxxxx/T/#u.
This bug *should* have been trivial to find.  But actually, it wasn't
found until syzkaller happened to use fchdir() to manipulate the
reference count just right for the bug to be noticeable.

Address this by making mntput_no_expire() issue a WARN if mnt_count has
become negative.

Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/64: irq replay remove decrementer overflow check

[ Upstream commit 59d512e4374b2d8a6ad341475dc94c4a4bdec7d3 ]

This is way to catch some cases of decrementer overflow, when the
decrementer has underflowed an odd number of times, while MSR[EE] was
disabled.

With a typical small decrementer, a timer that fires when MSR[EE] is
disabled will be "lost" if MSR[EE] remains disabled for between 4.3 and
8.6 seconds after the timer expires. In any case, the decrementer
interrupt would be taken at 8.6 seconds and the timer would be found at
that point.

So this check is for catching extreme latency events, and it prevents
those latencies from being a further few seconds long.  It's not obvious
this is a good tradeoff. This is already a watchdog magnitude event and
that situation is not improved a significantly with this check. For
large decrementers, it's useless.

Therefore remove this check, which avoids a mftb when enabling hard
disabled interrupts (e.g., when enabling after coming from hardware
interrupt handlers). Perhaps more importantly, it also removes the
clunky MSR[EE] vs PACA_IRQ_HARD_DIS incoherency in soft-interrupt replay
which simplifies the code.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201107014336.2337337-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

module: delay kobject uevent until after module init call

[ Upstream commit 38dc717e97153e46375ee21797aa54777e5498f3 ]

Apparently there has been a longstanding race between udev/systemd and
the module loader. Currently, the module loader sends a uevent right
after sysfs initialization, but before the module calls its init
function. However, some udev rules expect that the module has
initialized already upon receiving the uevent.

This race has been triggered recently (see link in references) in some
systemd mount unit files. For instance, the configfs module creates the
/sys/kernel/config mount point in its init function, however the module
loader issues the uevent before this happens. sys-kernel-config.mount
expects to be able to mount /sys/kernel/config upon receipt of the
module loading uevent, but if the configfs module has not called its
init function yet, then this directory will not exist and the mount unit
fails. A similar situation exists for sys-fs-fuse-connections.mount, as
the fuse sysfs mount point is created during the fuse module's init
function. If udev is faster than module initialization then the mount
unit would fail in a similar fashion.

To fix this race, delay the module KOBJ_ADD uevent until after the
module has finished calling its init routine.

References: https://github.com/systemd/systemd/issues/17586
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-By: Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix race of pending_pages in decompression

[ Upstream commit 6422a71ef40e4751d59b8c9412e7e2dafe085878 ]

I found out f2fs_free_dic() is invoked in a wrong timing, but
f2fs_verify_bio() still needed the dic info and it triggered the
below kernel panic. It has been caused by the race condition of
pending_pages value between decompression and verity logic, when
the same compression cluster had been split in different bios.
By split bios, f2fs_verify_bio() ended up with decreasing
pending_pages value before it is reset to nr_cpages by
f2fs_decompress_pages() and caused the kernel panic.

[ 4416.564763] Unable to handle kernel NULL pointer dereference
               at virtual address 0000000000000000
...
[ 4416.896016] Workqueue: fsverity_read_queue f2fs_verity_work
[ 4416.908515] pc : fsverity_verify_page+0x20/0x78
[ 4416.913721] lr : f2fs_verify_bio+0x11c/0x29c
[ 4416.913722] sp : ffffffc019533cd0
[ 4416.913723] x29: ffffffc019533cd0 x28: 0000000000000402
[ 4416.913724] x27: 0000000000000001 x26: 0000000000000100
[ 4416.913726] x25: 0000000000000001 x24: 0000000000000004
[ 4416.913727] x23: 0000000000001000 x22: 0000000000000000
[ 4416.913728] x21: 0000000000000000 x20: ffffffff2076f9c0
[ 4416.913729] x19: ffffffff2076f9c0 x18: ffffff8a32380c30
[ 4416.913731] x17: ffffffc01f966d97 x16: 0000000000000298
[ 4416.913732] x15: 0000000000000000 x14: 0000000000000000
[ 4416.913733] x13: f074faec89ffffff x12: 0000000000000000
[ 4416.913734] x11: 0000000000001000 x10: 0000000000001000
[ 4416.929176] x9 : ffffffff20d1f5c7 x8 : 0000000000000000
[ 4416.929178] x7 : 626d7464ff286b6b x6 : ffffffc019533ade
[ 4416.929179] x5 : 000000008049000e x4 : ffffffff2793e9e0
[ 4416.929180] x3 : 000000008049000e x2 : ffffff89ecfa74d0
[ 4416.929181] x1 : 0000000000000c40 x0 : ffffffff2076f9c0
[ 4416.929184] Call trace:
[ 4416.929187]  fsverity_verify_page+0x20/0x78
[ 4416.929189]  f2fs_verify_bio+0x11c/0x29c
[ 4416.929192]  f2fs_verity_work+0x58/0x84
[ 4417.050667]  process_one_work+0x270/0x47c
[ 4417.055354]  worker_thread+0x27c/0x4d8
[ 4417.059784]  kthread+0x13c/0x320
[ 4417.063693]  ret_from_fork+0x10/0x18

Chao pointed this can happen by the below race condition.

Thread A        f2fs_post_read_wq          fsverity_wq
- f2fs_read_multi_pages()
  - f2fs_alloc_dic
   - dic->pending_pages = 2
   - submit_bio()
   - submit_bio()
               - f2fs_post_read_work() handle first bio
                - f2fs_decompress_work()
                 - __read_end_io()
                  - f2fs_decompress_pages()
                   - dic->pending_pages--
                - enqueue f2fs_verity_work()
                                           - f2fs_verity_work() handle first bio
                                            - f2fs_verify_bio()
                                             - dic->pending_pages--
               - f2fs_post_read_work() handle second bio
                - f2fs_decompress_work()
                - enqueue f2fs_verity_work()
                                            - f2fs_verify_pages()
                                            - f2fs_free_dic()

                                          - f2fs_verity_work() handle second bio
                                           - f2fs_verfy_bio()
                                                 - use-after-free on dic

Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: avoid race condition for shrinker count

[ Upstream commit a95ba66ac1457b76fe472c8e092ab1006271f16c ]

Light reported sometimes shinker gets nat_cnt < dirty_nat_cnt resulting in
wrong do_shinker work. Let's avoid to return insane overflowed value by adding
single tracking value.

Reported-by: Light Hsieh <Light.Hsieh@mediatek.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4: Fix a pNFS layout related use-after-free race when freeing the inode

[ Upstream commit b6d49ecd1081740b6e632366428b960461f8158b ]

When returning the layout in nfs4_evict_inode(), we need to ensure that
the layout is actually done being freed before we can proceed to free the
inode itself.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i3c master: fix missing destroy_workqueue() on error in i3c_master_register

[ Upstream commit 59165d16c699182b86b5c65181013f1fd88feb62 ]

Add the missing destroy_workqueue() before return from
i3c_master_register in the error handling case.

Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-i3c/20201028091543.136167-1-miaoqinglang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: sysdev: add missing iounmap() on error in mpic_msgr_probe()

[ Upstream commit ffa1797040c5da391859a9556be7b735acbe1242 ]

I noticed that iounmap() of msgr_block_addr before return from
mpic_msgr_probe() in the error handling case is missing. So use
devm_ioremap() instead of just ioremap() when remapping the message
register block, so the mapping will be automatically released on
probe failure.

Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201028091551.136400-1-miaoqinglang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: pl031: fix resource leak in pl031_probe

[ Upstream commit 1eab0fea2514b269e384c117f5b5772b882761f0 ]

When devm_rtc_allocate_device is failed in pl031_probe, it should release
mem regions with device.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Liang <zhengliang6@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201112093139.32566-1-zhengliang6@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

quota: Don't overflow quota file offsets

[ Upstream commit 10f04d40a9fa29785206c619f80d8beedb778837 ]

The on-disk quota format supports quota files with upto 2^32 blocks. Be
careful when computing quota file offsets in the quota files from block
numbers as they can overflow 32-bit types. Since quota files larger than
4GB would require ~26 millions of quota users, this is mostly a
theoretical concern now but better be careful, fuzzers would find the
problem sooner or later anyway...

Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

module: set MODULE_STATE_GOING state when a module fails to load

[ Upstream commit 5e8ed280dab9eeabc1ba0b2db5dbe9fe6debb6b5 ]

If a module fails to load due to an error in prepare_coming_module(),
the following error handling in load_module() runs with
MODULE_STATE_COMING in module's state. Fix it by correctly setting
MODULE_STATE_GOING under "bug_cleanup" label.

Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: sun6i: Fix memleak in sun6i_rtc_clk_init

[ Upstream commit 28d211919e422f58c1e6c900e5810eee4f1ce4c8 ]

When clk_hw_register_fixed_rate_with_accuracy() fails,
clk_data should be freed. It's the same for the subsequent
two error paths, but we should also unregister the already
registered clocks in them.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201020061226.6572-1-dinghao.liu@zju.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: check kthread stopped flag when sq thread is unparked

commit 65b2b213484acd89a3c20dbb524e52a2f3793b78 upstream.

syzbot reports following issue:
INFO: task syz-executor.2:12399 can't die for more than 143 seconds.
task:syz-executor.2  state:D stack:28744 pid:12399 ppid:  8504 flags:0x00004004
Call Trace:
 context_switch kernel/sched/core.c:3773 [inline]
 __schedule+0x893/0x2170 kernel/sched/core.c:4522
 schedule+0xcf/0x270 kernel/sched/core.c:4600
 schedule_timeout+0x1d8/0x250 kernel/time/timer.c:1847
 do_wait_for_common kernel/sched/completion.c:85 [inline]
 __wait_for_common kernel/sched/completion.c:106 [inline]
 wait_for_common kernel/sched/completion.c:117 [inline]
 wait_for_completion+0x163/0x260 kernel/sched/completion.c:138
 kthread_stop+0x17a/0x720 kernel/kthread.c:596
 io_put_sq_data fs/io_uring.c:7193 [inline]
 io_sq_thread_stop+0x452/0x570 fs/io_uring.c:7290
 io_finish_async fs/io_uring.c:7297 [inline]
 io_sq_offload_create fs/io_uring.c:8015 [inline]
 io_uring_create fs/io_uring.c:9433 [inline]
 io_uring_setup+0x19b7/0x3730 fs/io_uring.c:9507
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45deb9
Code: Unable to access opcode bytes at RIP 0x45de8f.
RSP: 002b:00007f174e51ac78 EFLAGS: 00000246 ORIG_RAX: 00000000000001a9
RAX: ffffffffffffffda RBX: 0000000000008640 RCX: 000000000045deb9
RDX: 0000000000000000 RSI: 0000000020000140 RDI: 00000000000050e5
RBP: 000000000118bf58 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000118bf2c
R13: 00007ffed9ca723f R14: 00007f174e51b9c0 R15: 000000000118bf2c
INFO: task syz-executor.2:12399 blocked for more than 143 seconds.
      Not tainted 5.10.0-rc3-next-20201110-syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.

Currently we don't have a reproducer yet, but seems that there is a
race in current codes:
=> io_put_sq_data
      ctx_list is empty now.       |
==> kthread_park(sqd->thread);     |
                                   | T1: sq thread is parked now.
==> kthread_stop(sqd->thread);     |
    KTHREAD_SHOULD_STOP is set now.|
===> kthread_unpark(k);            |
                                   | T2: sq thread is now unparkd, run again.
                                   |
                                   | T3: sq thread is now preempted out.
                                   |
===> wake_up_process(k);           |
                                   |
                                   | T4: Since sqd ctx_list is empty, needs_sched will be true,
                                   | then sq thread sets task state to TASK_INTERRUPTIBLE,
                                   | and schedule, now sq thread will never be waken up.
===> wait_for_completion           |

I have artificially used mdelay() to simulate above race, will get same
stack like this syzbot report, but to be honest, I'm not sure this code
race triggers syzbot report.

To fix this possible code race, when sq thread is unparked, need to check
whether sq thread has been stopped.

Reported-by: syzbot+03beeb595f074db9cfd1@syzkaller.appspotmail.com
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fcntl: Fix potential deadlock in send_sig{io, urg}()

commit 8d1ddb5e79374fb277985a6b3faa2ed8631c5b4c upstream.

Syzbot reports a potential deadlock found by the newly added recursive
read deadlock detection in lockdep:

[...] ========================================================
[...] WARNING: possible irq lock inversion dependency detected
[...] 5.9.0-rc2-syzkaller #0 Not tainted
[...] --------------------------------------------------------
[...] syz-executor.1/10214 just changed the state of lock:
[...] ffff88811f506338 (&f->f_owner.lock){.+..}-{2:2}, at: send_sigurg+0x1d/0x200
[...] but this lock was taken by another, HARDIRQ-safe lock in the past:
[...]  (&dev->event_lock){-...}-{2:2}
[...]
[...]
[...] and interrupts could create inverse lock ordering between them.
[...]
[...]
[...] other info that might help us debug this:
[...] Chain exists of:
[...]   &dev->event_lock --> &new->fa_lock --> &f->f_owner.lock
[...]
[...]  Possible interrupt unsafe locking scenario:
[...]
[...]        CPU0                    CPU1
[...]        ----                    ----
[...]   lock(&f->f_owner.lock);
[...]                                local_irq_disable();
[...]                                lock(&dev->event_lock);
[...]                                lock(&new->fa_lock);
[...]   <Interrupt>
[...]     lock(&dev->event_lock);
[...]
[...]  *** DEADLOCK ***

The corresponding deadlock case is as followed:

CPU 0 CPU 1 CPU 2
read_lock(&fown->lock);
spin_lock_irqsave(&dev->event_lock, ...)
write_lock_irq(&filp->f_owner.lock); // wait for the lock
read_lock(&fown-lock); // have to wait until the writer release
       // due to the fairness
<interrupted>
spin_lock_irqsave(&dev->event_lock); // wait for the lock

The lock dependency on CPU 1 happens if there exists a call sequence:

input_inject_event():
  spin_lock_irqsave(&dev->event_lock,...);
  input_handle_event():
    input_pass_values():
      input_to_handler():
        handler->event(): // evdev_event()
          evdev_pass_values():
            spin_lock(&client->buffer_lock);
            __pass_event():
              kill_fasync():
                kill_fasync_rcu():
                  read_lock(&fa->fa_lock);
                  send_sigio():
                    read_lock(&fown->lock);

To fix this, make the reader in send_sigurg() and send_sigio() use
read_lock_irqsave() and read_lock_irqrestore().

Reported-by: syzbot+22e87cdf94021b984aa6@syzkaller.appspotmail.com
Reported-by: syzbot+c5e32344981ad9f33750@syzkaller.appspotmail.com
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: check for invalid block size early when mounting a file system

commit c9200760da8a728eb9767ca41a956764b28c1310 upstream.

Check for valid block size directly by validating s_log_block_size; we
were doing this in two places.  First, by calculating blocksize via
BLOCK_SIZE << s_log_block_size, and then checking that the blocksize
was valid.  And then secondly, by checking s_log_block_size directly.

The first check is not reliable, and can trigger an UBSAN warning if
s_log_block_size on a maliciously corrupted superblock is greater than
22.  This is harmless, since the second test will correctly reject the
maliciously fuzzed file system, but to make syzbot shut up, and
because the two checks are duplicative in any case, delete the
blocksize check, and move the s_log_block_size earlier in
ext4_fill_super().

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: syzbot+345b75652b1d24227443@syzkaller.appspotmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bfs: don't use WARNING: string when it's just info.

commit dc889b8d4a8122549feabe99eead04e6b23b6513 upstream.

Make the printk() [bfs "printf" macro] seem less severe by changing
"WARNING:" to "NOTE:".

<asm-generic/bug.h> warns us about using WARNING or BUG in a format string
other than in WARN() or BUG() family macros.  bfs/inode.c is doing just
that in a normal printk() call, so change the "WARNING" string to be
"NOTE".

Link: https://lkml.kernel.org/r/20201203212634.17278-1-rdunlap@infradead.org
Reported-by: syzbot+3fd34060f26e766536ff@syzkaller.appspotmail.com
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: "Tigran A. Aivazian" <aivazian.tigran@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: rawmidi: Access runtime->avail always in spinlock

commit 88a06d6fd6b369d88cec46c62db3e2604a2f50d5 upstream.

The runtime->avail field may be accessed concurrently while some
places refer to it without taking the runtime->lock spinlock, as
detected by KCSAN.  Usually this isn't a big problem, but for
consistency and safety, we should take the spinlock at each place
referencing this field.

Reported-by: syzbot+a23a6f1215c84756577c@syzkaller.appspotmail.com
Reported-by: syzbot+3d367d1df1d2b67f5c19@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20201206083527.21163-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: seq: Use bool for snd_seq_queue internal flags

commit 4ebd47037027c4beae99680bff3b20fdee5d7c1e upstream.

The snd_seq_queue struct contains various flags in the bit fields.
Those are categorized to two different use cases, both of which are
protected by different spinlocks.  That implies that there are still
potential risks of the bad operations for bit fields by concurrent
accesses.

For addressing the problem, this patch rearranges those flags to be
a standard bool instead of a bit field.

Reported-by: syzbot+63cbe31877bb80ef58f5@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20201206083456.21110-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix shift-out-of-bounds in sanity_check_raw_super()

commit e584bbe821229a3e7cc409eecd51df66f9268c21 upstream.

syzbot reported a bug which could cause shift-out-of-bounds issue,
fix it.

Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x107/0x163 lib/dump_stack.c:120
 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395
 sanity_check_raw_super fs/f2fs/super.c:2812 [inline]
 read_raw_super_block fs/f2fs/super.c:3267 [inline]
 f2fs_fill_super.cold+0x16c9/0x16f6 fs/f2fs/super.c:3519
 mount_bdev+0x34d/0x410 fs/super.c:1366
 legacy_get_tree+0x105/0x220 fs/fs_context.c:592
 vfs_get_tree+0x89/0x2f0 fs/super.c:1496
 do_new_mount fs/namespace.c:2896 [inline]
 path_mount+0x12ae/0x1e70 fs/namespace.c:3227
 do_mount fs/namespace.c:3240 [inline]
 __do_sys_mount fs/namespace.c:3448 [inline]
 __se_sys_mount fs/namespace.c:3425 [inline]
 __x64_sys_mount+0x27f/0x300 fs/namespace.c:3425
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported-by: syzbot+ca9a785f8ac472085994@syzkaller.appspotmail.com
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: gp8psk: initialize stats at power control logic

commit d0ac1a26ed5943127cb0156148735f5f52a07075 upstream.

As reported on:
https://lore.kernel.org/linux-media/20190627222020.45909-1-willemdebruijn.kernel@gmail.com/

if gp8psk_usb_in_op() returns an error, the status var is not
initialized. Yet, this var is used later on, in order to
identify:
- if the device was already started;
- if firmware has loaded;
- if the LNBf was powered on.

Using status = 0 seems to ensure that everything will be
properly powered up.

So, instead of the proposed solution, let's just set
status = 0.

Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: vmw_vmci: fix kernel info-leak by initializing dbells in vmci_ctx_get_chkpt_doorbells()

commit 31dcb6c30a26d32650ce134820f27de3c675a45a upstream.

A kernel-infoleak was reported by syzbot, which was caused because
dbells was left uninitialized.
Using kzalloc() instead of kmalloc() fixes this issue.

Reported-by: syzbot+a79e17c39564bedf0930@syzkaller.appspotmail.com
Tested-by: syzbot+a79e17c39564bedf0930@syzkaller.appspotmail.com
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Link: https://lore.kernel.org/r/20201122224534.333471-1-anant.thazhemadam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

reiserfs: add check for an invalid ih_entry_count

commit d24396c5290ba8ab04ba505176874c4e04a2d53c upstream.

when directory item has an invalid value set for ih_entry_count it might
trigger use-after-free or out-of-bounds read in bin_search_in_dir_item()

ih_entry_count * IH_SIZE for directory item should not be larger than
ih_item_len

Link: https://lore.kernel.org/r/20201101140958.3650143-1-rkovhaev@gmail.com
Reported-and-tested-by: syzbot+83b6f7cf9922cae5c4d7@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=83b6f7cf9922cae5c4d7
Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbcon: Disable accelerated scrolling

commit 39aead8373b3c20bb5965c024dfb51a94e526151 upstream.

So ever since syzbot discovered fbcon, we have solid proof that it's
full of bugs. And often the solution is to just delete code and remove
features, e.g.  50145474f6ef ("fbcon: remove soft scrollback code").

Now the problem is that most modern-ish drivers really only treat
fbcon as an dumb kernel console until userspace takes over, and Oops
printer for some emergencies. Looking at drm drivers and the basic
vesa/efi fbdev drivers shows that only 3 drivers support any kind of
acceleration:

- nouveau, seems to be enabled by default
- omapdrm, when a DMM remapper exists using remapper rewriting for
  y/xpanning
- gma500, but that is getting deleted now for the GTT remapper trick,
  and the accelerated copyarea never set the FBINFO_HWACCEL_COPYAREA
  flag, so unused (and could be deleted already I think).

No other driver supportes accelerated fbcon. And fbcon is the only
user of this accel code (it's not exposed as uapi through ioctls),
which means we could garbage collect fairly enormous amounts of code
if we kill this.

Plus because syzbot only runs on virtual hardware, and none of the
drivers for that have acceleration, we'd remove a huge gap in testing.
And there's no other even remotely comprehensive testing aside from
syzbot.

This patch here just disables the acceleration code by always
redrawing when scrolling. The plan is that once this has been merged
for well over a year in released kernels, we can start to go around
and delete a lot of code.

v2:
- Drop a few more unused local variables, somehow I missed the
compiler warnings (Sam)
- Fix typo in comment (Jiri)
- add a todo entry for the cleanup (Thomas)

v3: Remove more unused variables (0day)

Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Peilin Ye <yepeilin.cs@gmail.com>
Cc: George Kennedy <george.kennedy@oracle.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201029132229.4068359-1-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: hci_h5: close serdev device and free hu in h5_close

commit 70f259a3f4276b71db365b1d6ff1eab805ea6ec3 upstream.

When h5_close() gets called, the memory allocated for the hu gets
freed only if hu->serdev doesn't exist. This leads to a memory leak.
So when h5_close() is requested, close the serdev device instance and
free the memory allocated to the hu entirely instead.

Fixes: https://syzkaller.appspot.com/bug?extid=6ce141c55b2f7aafd1c4
Reported-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com
Tested-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: cxgb4i: Fix TLS dependency

commit cb5253198f10a4cd79b7523c581e6173c7d49ddb upstream.

SCSI_CXGB4_ISCSI selects CHELSIO_T4. The latter depends on TLS || TLS=n, so
since 'select' does not check dependencies of the selected symbol,
SCSI_CXGB4_ISCSI should also depend on TLS || TLS=n.

This prevents the following kconfig warning and restricts SCSI_CXGB4_ISCSI
to 'm' whenever TLS=m.

WARNING: unmet direct dependencies detected for CHELSIO_T4
  Depends on [m]: NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_CHELSIO [=y] && PCI [=y] && (IPV6 [=y] || IPV6 [=y]=n) && (TLS [=m] || TLS [=m]=n)
  Selected by [y]:
  - SCSI_CXGB4_ISCSI [=y] && SCSI_LOWLEVEL [=y] && SCSI [=y] && PCI [=y] && INET [=y] && (IPV6 [=y] || IPV6 [=y]=n) && ETHERNET [=y]

Link: https://lore.kernel.org/r/20201208220505.24488-1-rdunlap@infradead.org
Fixes: 7b36b6e03b0d ("[SCSI] cxgb4i v5: iscsi driver")
Cc: Karen Xie <kxie@chelsio.com>
Cc: linux-scsi@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zlib: move EXPORT_SYMBOL() and MODULE_LICENSE() out of dfltcc_syms.c

commit 605cc30dea249edf1b659e7d0146a2cf13cbbf71 upstream.

In commit 11fb479ff5d9 ("zlib: export S390 symbols for zlib modules"), I
added EXPORT_SYMBOL()s to dfltcc_inflate.c but then Mikhail said that
these should probably be in dfltcc_syms.c with the other
EXPORT_SYMBOL()s.

However, that is contrary to the current kernel style, which places
EXPORT_SYMBOL() immediately after the function that it applies to, so
move all EXPORT_SYMBOL()s to their respective function locations and
drop the dfltcc_syms.c file.  Also move MODULE_LICENSE() from the
deleted file to dfltcc.c.

[rdunlap@infradead.org: remove dfltcc_syms.o from Makefile]
Link: https://lkml.kernel.org/r/20201227171837.15492-1-rdunlap@infradead.org
Link: https://lkml.kernel.org/r/20201219052530.28461-1-rdunlap@infradead.org
Fixes: 11fb479ff5d9 ("zlib: export S390 symbols for zlib modules")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Zaslonko Mikhail <zaslonko@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: Fix memory leak when parsing multiple source parameters

commit 2d18e54dd8662442ef5898c6bdadeaf90b3cebbc upstream.

A memory leak is found in cgroup1_parse_param() when multiple source
parameters overwrite fc->source in the fs_context struct without free.

unreferenced object 0xffff888100d930e0 (size 16):
  comm "mount", pid 520, jiffies 4303326831 (age 152.783s)
  hex dump (first 16 bytes):
    74 65 73 74 6c 65 61 6b 00 00 00 00 00 00 00 00  testleak........
  backtrace:
    [<000000003e5023ec>] kmemdup_nul+0x2d/0xa0
    [<00000000377dbdaa>] vfs_parse_fs_string+0xc0/0x150
    [<00000000cb2b4882>] generic_parse_monolithic+0x15a/0x1d0
    [<000000000f750198>] path_mount+0xee1/0x1820
    [<0000000004756de2>] do_mount+0xea/0x100
    [<0000000094cafb0a>] __x64_sys_mount+0x14b/0x1f0

Fix this bug by permitting a single source parameter and rejecting with
an error all subsequent ones.

Fixes: 8d2451f4994f ("cgroup1: switch to option-by-option parsing")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Reviewed-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools headers UAPI: Sync linux/const.h with the kernel headers

commit 7ddcdea5b54492f54700f427f58690cf1e187e5e upstream.

To pick up the changes in:

  a85cbe6159ffc973 ("uapi: move constants from <linux/kernel.h> to <linux/const.h>")

That causes no changes in tooling, just addresses this perf build
warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/const.h' differs from latest version at 'include/uapi/linux/const.h'
  diff -u tools/include/uapi/linux/const.h include/uapi/linux/const.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uapi: move constants from <linux/kernel.h> to <linux/const.h>

commit a85cbe6159ffc973e5702f70a3bd5185f8f3c38d upstream.

and include <linux/const.h> in UAPI headers instead of <linux/kernel.h>.

The reason is to avoid indirect <linux/sysinfo.h> include when using
some network headers: <linux/netlink.h> or others -> <linux/kernel.h>
-> <linux/sysinfo.h>.

This indirect include causes on MUSL redefinition of struct sysinfo when
included both <sys/sysinfo.h> and some of UAPI headers:

    In file included from x86_64-buildroot-linux-musl/sysroot/usr/include/linux/kernel.h:5,
                     from x86_64-buildroot-linux-musl/sysroot/usr/include/linux/netlink.h:5,
                     from ../include/tst_netlink.h:14,
                     from tst_crypto.c:13:
    x86_64-buildroot-linux-musl/sysroot/usr/include/linux/sysinfo.h:8:8: error: redefinition of `struct sysinfo'
     struct sysinfo {
            ^~~~~~~
    In file included from ../include/tst_safe_macros.h:15,
                     from ../include/tst_test.h:93,
                     from tst_crypto.c:11:
    x86_64-buildroot-linux-musl/sysroot/usr/include/sys/sysinfo.h:10:8: note: originally defined here

Link: https://lkml.kernel.org/r/20201015190013.8901-1-petr.vorel@gmail.com
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Suggested-by: Rich Felker <dalias@aerifal.cx>
Acked-by: Rich Felker <dalias@libc.org>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: fix io_sqe_files_unregister() hangs

commit 1ffc54220c444774b7f09e6d2121e732f8e19b94 upstream.

io_sqe_files_unregister() uninterruptibly waits for enqueued ref nodes,
however requests keeping them may never complete, e.g. because of some
userspace dependency. Make sure it's interruptible otherwise it would
hang forever.

Cc: stable@vger.kernel.org # 5.6+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: add a helper for setting a ref node

commit 1642b4450d20e31439c80c28256c8eee08684698 upstream.

Setting a new reference node to a file data is not trivial, don't repeat
it, add and use a helper.

Cc: stable@vger.kernel.org # 5.6+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: use bottom half safe lock for fixed file data

commit ac0648a56c1ff66c1cbf735075ad33a26cbc50de upstream.

io_file_data_ref_zero() can be invoked from soft-irq from the RCU core,
hence we need to ensure that the file_data lock is bottom half safe. Use
the _bh() variants when grabbing this lock.

Reported-by: syzbot+1f4ba1e5520762c523c6@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: don't assume mm is constant across submits

commit 77788775c7132a8d93c6930ab1bd84fc743c7cb7 upstream.

If we COW the identity, we assume that ->mm never changes. But this
isn't true of multiple processes end up sharing the ring. Hence treat
id->mm like like any other process compontent when it comes to the
identity mapping. This is pretty trivial, just moving the existing grab
into io_grab_identity(), and including a check for the match.

Cc: stable@vger.kernel.org # 5.10
Fixes: 1e6fa5216a0e ("io_uring: COW io_identity on mismatch")
Reported-by: Christian Brauner <christian.brauner@ubuntu.com>:
Tested-by: Christian Brauner <christian.brauner@ubuntu.com>:
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lib/zlib: fix inflating zlib streams on s390

commit f0bb29e8c4076444d32df00c8d32e169ceecf283 upstream.

Decompressing zlib streams on s390 fails with "incorrect data check"
error.

Userspace zlib checks inflate_state.flags in order to byteswap checksums
only for zlib streams, and s390 hardware inflate code, which was ported
from there, tries to match this behavior.  At the same time, kernel zlib
does not use inflate_state.flags, so it contains essentially random
values.  For many use cases either zlib stream is zeroed out or checksum
is not used, so this problem is masked, but at least SquashFS is still
affected.

Fix by always passing a checksum to and from the hardware as is, which
matches zlib_inflate()'s expectations.

Link: https://lkml.kernel.org/r/20201215155551.894884-1-iii@linux.ibm.com
Fixes: 126196100063 ("lib/zlib: add s390 hardware support for kernel zlib_inflate")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Cc: <stable@vger.kernel.org> [5.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: memmap defer init doesn't work as expected

commit dc2da7b45ffe954a0090f5d0310ed7b0b37d2bd2 upstream.

VMware observed a performance regression during memmap init on their
platform, and bisected to commit 73a6e474cb376 ("mm: memmap_init:
iterate over memblock regions rather that check each PFN") causing it.

Before the commit:

  [0.033176] Normal zone: 1445888 pages used for memmap
  [0.033176] Normal zone: 89391104 pages, LIFO batch:63
  [0.035851] ACPI: PM-Timer IO Port: 0x448

With commit

  [0.026874] Normal zone: 1445888 pages used for memmap
  [0.026875] Normal zone: 89391104 pages, LIFO batch:63
  [2.028450] ACPI: PM-Timer IO Port: 0x448

The root cause is the current memmap defer init doesn't work as expected.

Before, memmap_init_zone() was used to do memmap init of one whole zone,
to initialize all low zones of one numa node, but defer memmap init of
the last zone in that numa node.  However, since commit 73a6e474cb376,
function memmap_init() is adapted to iterater over memblock regions
inside one zone, then call memmap_init_zone() to do memmap init for each
region.

E.g, on VMware's system, the memory layout is as below, there are two
memory regions in node 2.  The current code will mistakenly initialize the
whole 1st region [mem 0xab00000000-0xfcffffffff], then do memmap defer to
iniatialize only one memmory section on the 2nd region [mem
0x10000000000-0x1033fffffff].  In fact, we only expect to see that there's
only one memory section's memmap initialized.  That's why more time is
costed at the time.

[    0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[    0.008843] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x55ffffffff]
[    0.008844] ACPI: SRAT: Node 1 PXM 1 [mem 0x5600000000-0xaaffffffff]
[    0.008844] ACPI: SRAT: Node 2 PXM 2 [mem 0xab00000000-0xfcffffffff]
[    0.008845] ACPI: SRAT: Node 2 PXM 2 [mem 0x10000000000-0x1033fffffff]

Now, let's add a parameter 'zone_end_pfn' to memmap_init_zone() to pass
down the real zone end pfn so that defer_init() can use it to judge
whether defer need be taken in zone wide.

Link: https://lkml.kernel.org/r/20201223080811.16211-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20201223080811.16211-2-bhe@redhat.com
Fixes: commit 73a6e474cb376 ("mm: memmap_init: iterate over memblock regions rather that check each PFN")
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Rahul Gopakumar <gopakumarr@vmware.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/hugetlb: fix deadlock in hugetlb_cow error path

commit e7dd91c456a8cdbcd7066997d15e36d14276a949 upstream.

syzbot reported the deadlock here [1].  The issue is in hugetlb cow
error handling when there are not enough huge pages for the faulting
task which took the original reservation.  It is possible that other
(child) tasks could have consumed pages associated with the reservation.
In this case, we want the task which took the original reservation to
succeed.  So, we unmap any associated pages in children so that they can
be used by the faulting task that owns the reservation.

The unmapping code needs to hold i_mmap_rwsem in write mode.  However,
due to commit c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd
sharing synchronization") we are already holding i_mmap_rwsem in read
mode when hugetlb_cow is called.

Technically, i_mmap_rwsem does not need to be held in read mode for COW
mappings as they can not share pmd's.  Modifying the fault code to not
take i_mmap_rwsem in read mode for COW (and other non-sharable) mappings
is too involved for a stable fix.

Instead, we simply drop the hugetlb_fault_mutex and i_mmap_rwsem before
unmapping.  This is OK as it is technically not needed.  They are
reacquired after unmapping as expected by calling code.  Since this is
done in an uncommon error path, the overhead of dropping and reacquiring
mutexes is acceptable.

While making changes, remove redundant BUG_ON after unmap_ref_private.

[1] https://lkml.kernel.org/r/000000000000b73ccc05b5cf8558@google.com

Link: https://lkml.kernel.org/r/4c5781b8-3b00-761e-c0c7-c5edebb6ec1a@oracle.com
Fixes: c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: syzbot+5eee4145df3c15e96625@syzkaller.appspotmail.com
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: block: Fix a race in the runtime power management code

commit fa4d0f1992a96f6d7c988ef423e3127e613f6ac9 upstream.

With the current implementation the following race can happen:

 * blk_pre_runtime_suspend() calls blk_freeze_queue_start() and
   blk_mq_unfreeze_queue().

 * blk_queue_enter() calls blk_queue_pm_only() and that function returns
   true.

 * blk_queue_enter() calls blk_pm_request_resume() and that function does
   not call pm_request_resume() because the queue runtime status is
   RPM_ACTIVE.

 * blk_pre_runtime_suspend() changes the queue status into RPM_SUSPENDING.

Fix this race by changing the queue runtime status into RPM_SUSPENDING
before switching q_usage_counter to atomic mode.

Link: https://lore.kernel.org/r/20201209052951.16136-2-bvanassche@acm.org
Fixes: 986d413b7c15 ("blk-mq: Enable support for runtime power management")
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Stanley Chu <stanley.chu@mediatek.com>
Co-developed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

opp: Call the missing clk_put() on error

commit 0e1d9ca1766f5d95fb881f57b6c4a1ffa63d4648 upstream.

Fix the clock reference counting by calling the missing clk_put() in the
error path.

Cc: v5.10 <stable@vger.kernel.org> # v5.10
Fixes: dd461cd9183f ("opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

opp: fix memory leak in _allocate_opp_table

commit 976509bb310b913d30577f15b58bdd30effb0542 upstream.

In function _allocate_opp_table, opp_dev is allocated and referenced
by opp_table via _add_opp_dev. But in the case that the subsequent calls
return -EPROBE_DEFER, it will jump to err label and opp_table will be
freed. Then opp_dev becomes an unreferenced object to cause memory leak.
So let's call _remove_opp_dev to do the cleanup.

This fixes the following kmemleak report:

unreferenced object 0xffff000801524a00 (size 128):
  comm "swapper/0", pid 1, jiffies 4294892465 (age 84.616s)
  hex dump (first 32 bytes):
    40 00 56 01 08 00 ff ff 40 00 56 01 08 00 ff ff  @.V.....@.V.....
    b8 52 77 7f 08 00 ff ff 00 3c 4c 00 08 00 ff ff  .Rw......<L.....
  backtrace:
    [<00000000b1289fb1>] kmemleak_alloc+0x30/0x40
    [<0000000056da48f0>] kmem_cache_alloc+0x3d4/0x588
    [<00000000a84b3b0e>] _add_opp_dev+0x2c/0x88
    [<0000000062a380cd>] _add_opp_table_indexed+0x124/0x268
    [<000000008b4c8f1f>] dev_pm_opp_of_add_table+0x20/0x1d8
    [<00000000e5316798>] dev_pm_opp_of_cpumask_add_table+0x48/0xf0
    [<00000000db0a8ec2>] dt_cpufreq_probe+0x20c/0x448
    [<0000000030a3a26c>] platform_probe+0x68/0xd8
    [<00000000c618e78d>] really_probe+0xd0/0x3a0
    [<00000000642e856f>] driver_probe_device+0x58/0xb8
    [<00000000f10f5307>] device_driver_attach+0x74/0x80
    [<0000000004f254b8>] __driver_attach+0x58/0xe0
    [<0000000009d5d19e>] bus_for_each_dev+0x70/0xc8
    [<0000000000d22e1c>] driver_attach+0x24/0x30
    [<0000000001d4e952>] bus_add_driver+0x14c/0x1f0
    [<0000000089928aaa>] driver_register+0x64/0x120

Cc: v5.10 <stable@vger.kernel.org> # v5.10
Fixes: dd461cd9183f ("opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
[ Viresh: Added the stable tag ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: dw-bt1: Fix undefined devm_mux_control_get symbol

commit 7218838109fef61cdec988ff728e902d434c9cc5 upstream.

I mistakenly added the select attributes to the SPI_DW_BT1_DIRMAP config
instead of having them defined in SPI_DW_BT1. If the kernel doesn't have
the MULTIPLEXER and MUX_MMIO configs manually enabled and the
SPI_DW_BT1_DIRMAP config hasn't been selected, Baikal-T1 SPI device will
always fail to be probed by the driver. Fix that and the error reported by
the test robot:

>> ld.lld: error: undefined symbol: devm_mux_control_get
   >>> referenced by spi-dw-bt1.c
   >>> spi/spi-dw-bt1.o:(dw_spi_bt1_sys_init) in archive drivers/built-in.a

by moving the MULTIPLEXER/MUX_MMIO configs selection to the SPI_DW_BT1
config.

Link: https://lore.kernel.org/lkml/202011161745.uYRlekse-lkp@intel.com/
Link: https://lore.kernel.org/linux-spi/20201116040721.8001-1-rdunlap@infradead.org/
Fixes: abf00907538e ("spi: dw: Add Baikal-T1 SPI Controller glue driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20201127144612.4204-1-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jffs2: Fix NULL pointer dereference in rp_size fs option parsing

[ Upstream commit a61df3c413e49b0042f9caf774c58512d1cc71b7 ]

syzkaller found the following JFFS2 splat:

  Unable to handle kernel paging request at virtual address dfffa00000000001
  Mem abort info:
    ESR = 0x96000004
    EC = 0x25: DABT (current EL), IL = 32 bits
    SET = 0, FnV = 0
    EA = 0, S1PTW = 0
  Data abort info:
    ISV = 0, ISS = 0x00000004
    CM = 0, WnR = 0
  [dfffa00000000001] address between user and kernel address ranges
  Internal error: Oops: 96000004 [#1] SMP
  Dumping ftrace buffer:
     (ftrace buffer empty)
  Modules linked in:
  CPU: 0 PID: 12745 Comm: syz-executor.5 Tainted: G S                5.9.0-rc8+ #98
  Hardware name: linux,dummy-virt (DT)
  pstate: 20400005 (nzCv daif +PAN -UAO BTYPE=--)
  pc : jffs2_parse_param+0x138/0x308 fs/jffs2/super.c:206
  lr : jffs2_parse_param+0x108/0x308 fs/jffs2/super.c:205
  sp : ffff000022a57910
  x29: ffff000022a57910 x28: 0000000000000000
  x27: ffff000057634008 x26: 000000000000d800
  x25: 000000000000d800 x24: ffff0000271a9000
  x23: ffffa0001adb5dc0 x22: ffff000023fdcf00
  x21: 1fffe0000454af2c x20: ffff000024cc9400
  x19: 0000000000000000 x18: 0000000000000000
  x17: 0000000000000000 x16: ffffa000102dbdd0
  x15: 0000000000000000 x14: ffffa000109e44bc
  x13: ffffa00010a3a26c x12: ffff80000476e0b3
  x11: 1fffe0000476e0b2 x10: ffff80000476e0b2
  x9 : ffffa00010a3ad60 x8 : ffff000023b70593
  x7 : 0000000000000003 x6 : 00000000f1f1f1f1
  x5 : ffff000023fdcf00 x4 : 0000000000000002
  x3 : ffffa00010000000 x2 : 0000000000000001
  x1 : dfffa00000000000 x0 : 0000000000000008
  Call trace:
   jffs2_parse_param+0x138/0x308 fs/jffs2/super.c:206
   vfs_parse_fs_param+0x234/0x4e8 fs/fs_context.c:117
   vfs_parse_fs_string+0xe8/0x148 fs/fs_context.c:161
   generic_parse_monolithic+0x17c/0x208 fs/fs_context.c:201
   parse_monolithic_mount_data+0x7c/0xa8 fs/fs_context.c:649
   do_new_mount fs/namespace.c:2871 [inline]
   path_mount+0x548/0x1da8 fs/namespace.c:3192
   do_mount+0x124/0x138 fs/namespace.c:3205
   __do_sys_mount fs/namespace.c:3413 [inline]
   __se_sys_mount fs/namespace.c:3390 [inline]
   __arm64_sys_mount+0x164/0x238 fs/namespace.c:3390
   __invoke_syscall arch/arm64/kernel/syscall.c:36 [inline]
   invoke_syscall arch/arm64/kernel/syscall.c:48 [inline]
   el0_svc_common.constprop.0+0x15c/0x598 arch/arm64/kernel/syscall.c:149
   do_el0_svc+0x60/0x150 arch/arm64/kernel/syscall.c:195
   el0_svc+0x34/0xb0 arch/arm64/kernel/entry-common.c:226
   el0_sync_handler+0xc8/0x5b4 arch/arm64/kernel/entry-common.c:236
   el0_sync+0x15c/0x180 arch/arm64/kernel/entry.S:663
  Code: d2d40001 f2fbffe1 91002260 d343fc02 (38e16841)
  ---[ end trace 4edf690313deda44 ]---

This is because since ec10a24f10c8, the option parsing happens before
fill_super and so the MTD device isn't associated with the filesystem.
Defer the size check until there is a valid association.

Fixes: ec10a24f10c8 ("vfs: Convert jffs2 to use the new mount API")
Cc: <stable@vger.kernel.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

jffs2: Allow setting rp_size to zero during remounting

[ Upstream commit cd3ed3c73ac671ff6b0230ccb72b8300292d3643 ]

Set rp_size to zero will be ignore during remounting.

The method to identify whether we input a remounting option of
rp_size is to check if the rp_size input is zero. It can not work
well if we pass "rp_size=0".

This patch add a bool variable "set_rp_size" to fix this problem.

Reported-by: Jubin Zhong <zhongjubin@huawei.com>
Signed-off-by: lizhe <lizhe67@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: close a small race gap for files cancel

commit dfea9fce29fda6f2f91161677e0e0d9b671bc099 upstream.

The purpose of io_uring_cancel_files() is to wait for all requests
matching ->files to go/be cancelled. We should first drop files of a
request in io_req_drop_files() and only then make it undiscoverable for
io_uring_cancel_files.

First drop, then delete from list. It's ok to leave req->id->files
dangling, because it's not dereferenced by cancellation code, only
compared against. It would potentially go to sleep and be awaken by
following in io_req_drop_files() wake_up().

Fixes: 0f2122045b946 ("io_uring: don't rely on weak ->files references")
Cc: <stable@vger.kernel.org> # 5.5+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Add get_dig_frontend implementation for DCEx

commit 6bdeff12a96c9a5da95c8d11fefd145eb165e32a upstream.

Some old ASICs might not implement/require get_dig_frontend helper; in
this scenario, we can have a NULL pointer exception when we try to call
it inside vbios disable operation. For example, this situation might
happen when using Polaris12 with an eDP panel. This commit avoids this
situation by adding a specific get_dig_frontend implementation for DCEx.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Chiawen Huang <chiawen.huang@amd.com>
Reported-and-tested-by: Borislav Petkov <bp@suse.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md/raid10: initialize r10_bio->read_slot before use.

commit 93decc563637c4288380912eac0eb42fb246cc04 upstream.

In __make_request() a new r10bio is allocated and passed to
raid10_read_request(). The read_slot member of the bio is not
initialized, and the raid10_read_request() uses it to index an
array. This leads to occasional panics.

Fix by initializing the field to invalid value and checking for
valid value in raid10_read_request().

Cc: stable@vger.kernel.org
Signed-off-by: Kevin Vigor <kvigor@gmail.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ethtool: fix string set id check

[ Upstream commit efb796f5571f030743e1d9c662cdebdad724f8c5 ]

Syzbot reported a shift of a u32 by more than 31 in strset_parse_request()
which is undefined behavior. This is caused by range check of string set id
using variable ret (which is always 0 at this point) instead of id (string
set id from request).

Fixes: 71921690f974 ("ethtool: provide string sets with STRSET_GET request")
Reported-by: syzbot+96523fb438937cd01220@syzkaller.appspotmail.com
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Link: https://lore.kernel.org/r/b54ed5c5fd972a59afea3e1badfb36d86df68799.1607952208.git.mkubecek@suse.cz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ethtool: fix error paths in ethnl_set_channels()

[ Upstream commit ef72cd3c5ce168829c6684ecb2cae047d3493690 ]

Fix two error paths in ethnl_set_channels() to avoid lock-up caused
but unreleased RTNL.

Fixes: e19c591eafad ("ethtool: set device channel counts with CHANNELS_SET request")
Reported-by: LiLiang <liali@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Link: https://lore.kernel.org/r/20201215090810.801777-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: fix security context on server socket

[ Upstream commit 0c14846032f2c0a3b63234e1fc2759f4155b6067 ]

Currently MPTCP is not propagating the security context
from the ingress request socket to newly created msk
at clone time.

Address the issue invoking the missing security helper.

Fixes: cf7da0d66cc1 ("mptcp: Create SUBFLOW socket for incoming connections")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sched: sch_taprio: reset child qdiscs before freeing them

[ Upstream commit 44d4775ca51805b376a8db5b34f650434a08e556 ]

syzkaller shows that packets can still be dequeued while taprio_destroy()
is running. Let sch_taprio use the reset() function to cancel the advance
timer and drop all skbs from the child qdiscs.

Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler")
Link: https://syzkaller.appspot.com/bug?id=f362872379bf8f0017fb667c1ab158f2d1e764ae
Reported-by: syzbot+8971da381fb5a31f542d@syzkaller.appspotmail.com
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/63b6d79b0e830ebb0283e020db4df3cdfdfb2b94.1608142843.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>