drm: debugfs: Remove all files automatically on cleanup

Instead of having the drivers call drm_debugfs_remove_files() in
their drm_driver->debugfs_cleanup hook, do it automatically by
traversing minor->debugfs_list.
Also use debugfs_remove_recursive() so drivers who add their own
debugfs files don't have to keep track of them for removal.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-2-noralf@tronnes.org

drm/fourcc: add vivante tiled layout format modifiers

Vivante GC hardware uses simple 4x4 tiled and nested 64x64 supertiled
formats as well as so-called split-tiled variants for dual-pipe
hardware, where even and odd tiles start at different base addresses.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126153217.26916-1-p.zabel@pengutronix.de

drm/edid: Set YQ bits in the AVI infoframe according to CEA-861-F

CEA-861-F tells us:
"When transmitting any RGB colorimetry, the Source should set the
 YQ-field to match the RGB Quantization Range being transmitted
 (e.g., when Limited Range RGB, set YQ=0 or when Full Range RGB,
 set YQ=1) and the Sink shall ignore the YQ-field."

So let's go ahead and do that. Perhaps there are sinks that don't
ignore the YQ as they should for RGB?

I wasn't able to find similar text in CEA-861-E, so it would seem
to be a fairly "recent" addition.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111125725.8086-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>

drm/edid: Set AVI infoframe Q even when QS=0

HDMI 2.0 recommends that we set the Q bits in the AVI infoframe
even when the sink does not support quantization range selection (QS=0).
According to CEA-861 we can do that as long as the Q we send matches
the default quantization range for the mode.

Previously I think I had misread the spec as saying that you can't
send a non-zero Q at all when QS=0. But that's not what the spec
actually says.

v2: Fix typo in commit message (Jani)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111125725.8086-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>

drm/edid: Introduce drm_hdmi_avi_infoframe_quant_range()

Pull the logic to populate the quantization range information
in the AVI infoframe into a small helper. We'll be adding a bit
more logic to it, and having it in a central place seems like a
good idea since it's based on the CEA-861 spec.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111125725.8086-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>

drm/edid: Introduce drm_default_rgb_quant_range()

Make the code selecting the RGB quantization range a little less magicy
by wrapping it up in a small helper.

v2: s/adjusted_mode/mode in vc4 to make it actually compile
v3: Add a comment proposed by Eric

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111141835.25369-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>

drm/edid: Have drm_edid.h include hdmi.h

drm_edid.h depends on hdmi.h on account of enum hdmi_picture_aspect,
so let's just include hdmi.h and drop some useless struct declarations.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111125725.8086-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>

drm: Silence the compiler for drm_mode_get_hv_timings()

Since moving drm_crtc_get_hv_timings() into drm_modes.c, the compiler
has been able to get smarter and spots that drm_mode_copy() is trying to
preserve garbage from the stack.

Fixes: 196cd5d3758c ("drm: s/drm_crtc_get_hv_timings/drm_mode_get_hv_timings/")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126114409.9115-1-chris@chris-wilson.co.uk

drm/doc: Fix typos for early_unregister doc

There's no late_unregister. While at it switch to the new canonical
reference style.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-14-daniel.vetter@ffwll.ch

drm: s/drm_crtc_get_hv_timings/drm_mode_get_hv_timings/

The function operates on modes, not CRTCs. Also move it into
drm_modes.[hc]. Spotted while reviewing CRTC docs.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-15-daniel.vetter@ffwll.ch

drm/moc: Mark legacy fields in drm_driver as such

No point in documenting these, they only confuse.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-13-daniel.vetter@ffwll.ch

drm: Nuke ums vgaarb support

i915, nouveau (ever since merged to upstream) and radeon all lack ums
support in upstream. No point keeping the ums vgaarb support around.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-12-daniel.vetter@ffwll.ch

drm: remove device_is_agp callback

With that the drm_pci_device_is_agp function becomes trivial, so
inline that too. And while at it, move the drm_pci_agp_destroy
declaration into drm-internal.h, since it's not used by drivers.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-11-daniel.vetter@ffwll.ch

drm/mga: remove device_is_agp callback

It's only for a device quirk, and we might as well do that in the load
callback.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-10-daniel.vetter@ffwll.ch

drm/i810: drop device_is_agp callback

Use the same trick we used for i915 when we still had ums support:
Just initialize the agp support unconditionally in the driver load
function.

Unfortunately that means we need to export drm_agp_init again, but I
think that's a lesser evil.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-9-daniel.vetter@ffwll.ch

drm/doc: Clarify connector overview

There was a bit of mix-up between initialization and registering.

v2: Review from Gustavo.

Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-7-daniel.vetter@ffwll.ch
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-8-daniel.vetter@ffwll.ch

drm: Update kerneldoc for drm_crtc.[hc]

After going through all the trouble of splitting out parts from
drm_crtc.[hc] and then properly documenting each I've entirely
forgotten to show the same TLC for CRTCs themselves!

Let's make amends asap.

v2: Review from Eric.

Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm/gma500: Nuke device_is_agp callback

Returning 0 for an on-chip gpu doesn't change anything at all.

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-8-daniel.vetter@ffwll.ch

drm/kms-core: Use recommened kerneldoc for struct member refs

I just learned that &struct_name.member_name works and looks pretty
even. It doesn't (yet) link to the member directly though, which would
be really good for big structures or vfunc tables (where the
per-member kerneldoc tends to be long).

Also some minor drive-by polish where it makes sense, I read a lot
of docs ...

v2: Review from Eric.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-4-daniel.vetter@ffwll.ch

drm/core: Use recommened kerneldoc for struct member refs

I just learned that &struct_name.member_name works and looks pretty
even. It doesn't (yet) link to the member directly though, which would
be really good for big structures or vfunc tables (where the
per-member kerneldoc tends to be long).

Also some minor drive-by polish where it makes sense, I read a lot
of docs ...

v2: Review from Gustavo.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-6-daniel.vetter@ffwll.ch

drm/gem|prime|mm: Use recommened kerneldoc for struct member refs

I just learned that &struct_name.member_name works and looks pretty
even. It doesn't (yet) link to the member directly though, which would
be really good for big structures or vfunc tables (where the
per-member kerneldoc tends to be long).

Also some minor drive-by polish where it makes sense, I read a lot
of docs ...

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-5-daniel.vetter@ffwll.ch

drm/kms-helpers: Use recommened kerneldoc for struct member refs

I just learned that &struct_name.member_name works and looks pretty
even. It doesn't (yet) link to the member directly though, which would
be really good for big structures or vfunc tables (where the
per-member kerneldoc tends to be long).

Also some minor drive-by polish where it makes sense, I read a lot
of docs ...

v2: Comments from Gustavo.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Rewiewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-2-daniel.vetter@ffwll.ch

drm/dp: Store drm_device in MST topology manager

struct drm_dp_mst_topology_mgr currently stores a pointer to struct dev.
Changing this to instead hold a pointer to drm_device is more useful as it
gives access to DRM structures. This also makes it consistent with other
DRM structures like drm_crtc, drm_connector etc.

Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1485301777-3465-2-git-send-email-dhinakaran.pandiyan@intel.com

drm/vgem: Switch to reservation_object_lock() helpers

For the convenience of encapsulation the reservation object's ww_mutex
was wrapped in pair of lock/unlock helpers.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170123095357.29514-1-chris@chris-wilson.co.uk

drm/simple-helpers: Add missing includes

Add missing includes to pull in definitions for drm_crtc,
drm_plane and drm_encoder.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170122181117.8210-4-noralf@tronnes.org

drm/fb-cma-helper: Add drm_fbdev_cma_set_suspend_unlocked()

Add a CMA version of drm_fb_helper_set_suspend_unlocked().

Cc: laurent.pinchart@ideasonboard.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170122181117.8210-2-noralf@tronnes.org

drm: Update drm_cache.c to pull in the new drm_cache.h

The prototypes were moved to a new header, but the function definitions
were not updated to pull in the declarations.

drivers/gpu/drm/drm_cache.c:79:1: warning: no previous prototype for ‘drm_clflush_pages’ [-Wmissing-prototypes]
drivers/gpu/drm/drm_cache.c:120:1: warning: no previous prototype for ‘drm_clflush_sg’ [-Wmissing-prototypes]
drivers/gpu/drm/drm_cache.c:152:1: warning: no previous prototype for ‘drm_clflush_virt_range’ [-Wmissing-prototypes]

Fixes: f9a87bd7d5b6 ("drm: Move drm_clflush prototypes to drm_cache header file")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170121181944.24672-1-chris@chris-wilson.co.uk

drm: bridge: dw-hdmi: fix building without CONFIG_OF

The of_node member in struct drm_bridge is hidden when CONFIG_OF
is disabled, causing a build error:

drivers/gpu/drm/bridge/dw-hdmi.c: In function '__dw_hdmi_probe':
drivers/gpu/drm/bridge/dw-hdmi.c:2063:14: error: 'struct drm_bridge' has no member named 'of_node'

We could fix this either using a Kconfig dependency on CONFIG_OF
or making the one line conditional. The latter gives us better
compile test coverage, so this is what I'm doing here.

Fixes: 69497eb9234e ("drm: bridge: dw-hdmi: Implement DRM bridge registration")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170123122312.3290934-1-arnd@arndb.de

drm/exynos: Remove Kconfig deps for FIMD and DECON7

While the Kconfig entries of FIMD and DECON7 both select
FB_MODE_HELPERS, the code doesn't use any of the functionality.

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1484928172-16784-1-git-send-email-tjakobi@math.uni-bielefeld.de

drm: Show leaked connectors upon unload

After warning that the connector list is not empty on device
unregistration (i.e. module unload) also print out which connectors are
still hanging around to aide finding the leak.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170119090513.4154-1-chris@chris-wilson.co.uk

lib/prime_numbers: Suppress warn on kmalloc failure

The allocation for the bitmap may become very large, larger than
MAX_ORDER, for large requests. We fail gracefully by falling back to
trail-division, so disable the warning from kmalloc:

  521.961092] WARNING: CPU: 0 PID: 30637 at mm/page_alloc.c:3548 __alloc_pages_slowpath+0x237/0x9a0
[  521.961105] Modules linked in: i915(+) drm_kms_helper intel_gtt prime_numbers [last unloaded: drm_kms_helper]
[  521.961126] CPU: 0 PID: 30637 Comm: drv_selftest Tainted: G     U  W       4.10.0-rc3+ #321
[  521.961137] Hardware name:                  /        , BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015
[  521.961148] Call Trace:
[  521.961161]  dump_stack+0x4d/0x6f
[  521.961172]  __warn+0xc1/0xe0
[  521.961181]  warn_slowpath_null+0x18/0x20
[  521.961189]  __alloc_pages_slowpath+0x237/0x9a0
[  521.961200]  ? sg_init_table+0x1a/0x40
[  521.961208]  ? get_page_from_freelist+0x3fa/0x910
[  521.961275]  ? i915_gem_object_get_sg+0x272/0x2b0 [i915]
[  521.961285]  __alloc_pages_nodemask+0x1ea/0x220
[  521.961295]  kmalloc_order+0x1c/0x50
[  521.961304]  __kmalloc+0x115/0x170
[  521.961314]  expand_to_next_prime+0x43/0x180 [prime_numbers]
[  521.961324]  next_prime_number+0x47/0xc0 [prime_numbers]
[  521.961377]  igt_vma_rotate+0x386/0x590 [i915]
[  521.961429]  i915_subtests+0x37/0xc0 [i915]
[  521.961481]  i915_vma_mock_selftests+0x3d/0x70 [i915]
[  521.961532]  run_selftests+0x16e/0x1f0 [i915]
[  521.961541]  ? 0xffffffffa02a4000
[  521.961592]  i915_mock_selftests+0x29/0x40 [i915]
[  521.961638]  i915_init+0xa/0x5e [i915]
[  521.961646]  ? 0xffffffffa02a4000
[  521.961655]  do_one_initcall+0x3e/0x160
[  521.961664]  ? __vunmap+0x7c/0xc0
[  521.961672]  ? vfree+0x29/0x70
[  521.961680]  ? kmem_cache_alloc+0xcf/0x120
[  521.961690]  do_init_module+0x55/0x1c4
[  521.961699]  load_module+0x1f3f/0x25b0
[  521.961707]  ? __symbol_put+0x40/0x40
[  521.961716]  ? kernel_read_file+0x100/0x190
[  521.961725]  SYSC_finit_module+0xbc/0xf0
[  521.961734]  SyS_finit_module+0x9/0x10
[  521.961744]  entry_SYSCALL_64_fastpath+0x17/0x98
[  521.961752] RIP: 0033:0x7f111aca4119
[  521.961760] RSP: 002b:00007ffd8be6cbe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[  521.961773] RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 00007f111aca4119
[  521.961781] RDX: 0000000000000000 RSI: 000055dfc18bc8e0 RDI: 0000000000000006
[  521.961789] RBP: 00007ffd8be6bbe0 R08: 0000000000000000 R09: 0000000000000000
[  521.961796] R10: 0000000000000006 R11: 0000000000000246 R12: 0000000000000005
[  521.961805] R13: 000055dfc18bd3a0 R14: 00007ffd8be6bbc0 R15: 0000000000000005

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170113235119.22528-1-chris@chris-wilson.co.uk

drm/hisilicon/hibmc: Fix wrong pointer passed to PTR_ERR()

PTR_ERR should access the value just tested by IS_ERR, otherwise
the wrong error code will be returned.

Fixes: d1667b86795a ("drm/hisilicon/hibmc: Add support for frame buffer")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170112151921.16538-1-weiyj.lk@gmail.com

drm/atomic: make release_crtc_commit() static

Fixes the following sparse warning:

drivers/gpu/drm/drm_atomic_helper.c:1360:6: warning:
 symbol 'release_crtc_commit' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170112142157.14684-1-weiyj.lk@gmail.com

drm: qxl: Open code teardown function for qxl

This avoids using the deprecated drm_put_dev() and unload() hook
interfaces in the qxl driver.

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170119134806.8926-2-krisman@collabora.co.uk

drm: qxl: Open code probing sequence for qxl

This avoids using the deprecated drm_get_pci_dev() and load() hook
interfaces in the qxl driver.

The only tricky part is to ensure TTM debugfs initialization happens
after the debugfs root node is created, which is done by moving that
code into the debufs_init() hook.

Tested on qemu with igt and running a WM on top of X.

Changes since v1:
 - Drop verification for primary minor in qxl_debugsfs_init.
Changes since V2:
 - Put new header together with other debugfs headers.

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170119134806.8926-1-krisman@collabora.co.uk

drm/bridge: adv7511: Re-write the i2c address before EDID probing

I've found that by just turning the chip on and off via the
POWER_DOWN register, I end up getting i2c_transfer errors on
HiKey.

Investigating further, it turns out that some of the register
state in hardware is getting lost, as the device registers are
reset when the chip is powered down.

Thus this patch simply re-writes the i2c address to the
ADV7511_REG_EDID_I2C_ADDR register to ensure its properly set
before we try to read the EDID data.

Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-7-git-send-email-john.stultz@linaro.org

drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID

Thus this patch changes the EDID probing logic so that we
re-use the __adv7511_power_on/off() calls instead of duplciating
logic.

This does change behavior slightly as it adds the HPD signal
pulse to the EDID probe path, but Archit has had a patch to
add HPD signal pulse to the EDID probe path before, so this
should address the cases where that helped. Another difference
is that regcache_mark_dirty() is also called in the power off
path once EDID is probed.

Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-6-git-send-email-john.stultz@linaro.org

drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused internally

In chasing down issues with EDID probing, I found some
duplicated but incomplete logic used to power the chip on and
off.

This patch refactors the adv7511_power_on/off functions, so
they can be used for internal needs.

Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-5-git-send-email-john.stultz@linaro.org

drm/bridge: adv7511: Enable HPD interrupts to support hotplug and improve monitor detection

On some adv7511 implementations, we can get some spurious
disconnect signals which can cause monitor probing to fail.

This patch enables HPD (hot plug detect) interrupt support
which allows the monitor to be properly re-initialized when
the spurious disconnect signal goes away.

This also enables proper hotplug support.

Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Originally-by: Archit Taneja <architt@codeaurora.org>
[jstultz: Added proper commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-4-git-send-email-john.stultz@linaro.org

drm/bridge: adv7511: Switch to using drm_kms_helper_hotplug_event()

In chasing down a previous issue with EDID probing from calling
drm_helper_hpd_irq_event() from irq context, Laurent noticed
that the DRM documentation suggests that
drm_kms_helper_hotplug_event() should be used instead.

Thus this patch replaces drm_helper_hpd_irq_event() with
drm_kms_helper_hotplug_event(), which requires we update the
connector.status entry and only call _hotplug_event() when the
status changes.

Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-3-git-send-email-john.stultz@linaro.org

drm/bridge: adv7511: Use work_struct to defer hotplug handing to out of irq context

I was recently seeing issues with EDID probing, where
the logic to wait for the EDID read bit to be set by the
IRQ wasn't happening and the code would time out and fail.

Digging deeper, I found this was due to the fact that
IRQs were disabled as we were running in IRQ context from
the HPD signal.

Thus this patch changes the logic to handle the HPD signal
via a work_struct so we can be out of irq context.

With this patch, the EDID probing on hotplug does not time
out.

Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-2-git-send-email-john.stultz@linaro.org

drm: vc4: use crtc helper drm_crtc_from_index()

Use drm_crtc_from_index() to find drm_crtc for given index, so that we
do not need to maintain a pointer array in struct vc4_dev.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1483961145-18453-7-git-send-email-shawnguo@kernel.org

drm: tegra: use crtc helper drm_crtc_from_index()

Function tegra_crtc_from_pipe() does the exactly same thing as what
crtc helper drm_crtc_from_index() provides.  Use the helper to save
some code.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1483961145-18453-6-git-send-email-shawnguo@kernel.org

drm: nouveau: use crtc helper drm_crtc_from_index()

Use drm_crtc_from_index() to find drm_crtc for given index.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1483961145-18453-5-git-send-email-shawnguo@kernel.org

drm: mediatek: use crtc helper drm_crtc_from_index()

Use drm_crtc_from_index() to find drm_crtc for given index, so that we
do not need to maintain a pointer array in struct mtk_drm_private.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1483961145-18453-4-git-send-email-shawnguo@kernel.org

drm: kirin: use crtc helper drm_crtc_from_index()

Use drm_crtc_from_index() to find drm_crtc for given index, so that we
do not need to maintain a pointer array in struct kirin_drm_private.

Reviewed-by: Xinliang Liu<z.liuxinliang@hisilicon.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1483961145-18453-3-git-send-email-shawnguo@kernel.org

drm: exynos: use crtc helper drm_crtc_from_index()

Use drm_crtc_from_index() to find drm_crtc for given index, so that we
do not need to maintain a pointer array in struct exynos_drm_private.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1483961145-18453-2-git-send-email-shawnguo@kernel.org

dt-bindings: display: dw-hdmi: Clean up DT bindings documentation

Make it clear that the core bridge/dw_hdmi.txt document isn't a device
tree binding by itself but is meant to be referenced by platform device
tree bindings, and update the Rockchip and Freescale DWC HDMI TX
bindings to reference it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-21-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Assert SVSRET before resetting the PHY

According to the PHY IP core vendor, the SVSRET signal must be asserted
before resetting the PHY. Tests on RK3288 and R-Car Gen3 showed no
regression, the change should thus be safe.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-20-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Fix the name of the PHY reset macros

The PHY reset signal is controlled by bit PHYRSTZ in the MC_PHYRSTZ
register. The signal is active low on Gen1 PHYs and active high on Gen2
PHYs. The driver toggles the signal high then low, which is correct for
all currently supported platforms, but the register values macros are
incorrectly named. Replace them with a single macro named after the bit,
and add a comment to the source code to explain the behaviour.

The driver's behaviour isn't changed by this rename, the code will still
need to be fixed to support Gen1 PHYs.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-19-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Define and use macros for PHY register addresses

Replace the hardcoded register address numerical values with macros to
clarify the code.

This change has been tested by comparing the assembly code before and
after the change.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-18-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Detect PHY type at runtime

Detect the PHY type and use it to handle the PHY type-specific SVSRET
signal.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-17-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Handle overflow workaround based on device version

Use the device version queried at runtime instead of the device type
provided through platform data to handle the overflow workaround. This
will make support of other SoCs integrating the same HDMI TX controller
version easier.

Among the supported platforms only i.MX6DL and i.MX6Q have been
identified as needing the workaround. Disabling it on Rockchip RK3288
(which integrates a v2.00a controller) didn't produce any error or
artifact.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-16-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Detect AHB audio DMA using correct register

Bit 0 in CONFIG1_ID tells whether the IP core uses an AHB slave
interface for control. The correct way to identify AHB audio DMA support
is through bit 1 in CONFIG3_ID.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-15-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Reject invalid product IDs

The DWC HDMI TX can be recognized by the two product identification
registers. If the registers don't read as expect the IP will be very
different than what the driver has been designed for, or will be
misconfigured in a way that makes it non-operational (invalid memory
address, incorrect clocks, ...). We should reject this situation with an
error.

While this isn't critical for proper operation with supported IPs at the
moment, the driver will soon gain automatic device-specific handling
based on runtime device identification. This change makes it easier to
implement that without having to default to a random guess in case the
device can't be identified.

While at it print a readable version number in the device identification
message instead of raw register values.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-14-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Rename CONF0 SPARECTRL bit to SVSRET

The bit is documented in a Rockchip BSP as

 #define m_SVSRET_SIG (1 << 5) /* depend on PHY_MHL_COMB0=1 */

This is confirmed by a Renesas platform, which uses a 2.0 DWC HDMI TX as
the RK3288. Rename the bit accordingly.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-13-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Remove PHY configuration resolution parameter

The current code hard codes the call of hdmi_phy_configure() to be 8bpp
and provides extraneous error checking to verify that this hardcoded
value is correct. Simplify the implementation by removing the argument.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-12-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Implement DRM bridge registration

As an option for drivers not based on the component framework, register
the bridge with the DRM core with the DRM bridge API. Existing drivers
based on dw_hdmi_bind() and dw_hdmi_unbind() are not affected as those
functions are preserved with their current behaviour.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-11-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Create connector in the bridge attach operation

The DRM device is not guaranteed by the bridge API to be available
before the attach callback. The driver performs properly at the moment
as it doesn't use the drm_bridge_add() registration method. As this will
be changed later, move connector creation to attach time to ensure
compatibility with the API.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-10-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Reorder functions to prepare for next commit

The next commit will reference structures and functions in a way that
currently requires forward declarations. Reorder the functions to avoid
that. No functional change to the code is performed.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-9-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Move IRQ and IO resource allocation to common code

There's no need to duplicate identical code in multiple drivers (two at
the moment, one more to come soon). Move it to the dw-hdmi core where it
can be shared. If resource allocation ever becomes device-specific later
we'll always have the option of splitting it out again.

While it at pass the platform device to the bind function to avoid
having to cast struct device to struct platform_device.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-8-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Don't forward HPD events to DRM core before attach

Hotplug events should only be forwarded to the DRM core by the interrupt
handler when the bridge has been attached, otherwise the DRM device
pointer will be NULL, resulting in a crash.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-7-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Remove encoder field from struct dw_hdmi

The field isn't needed, remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-6-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Embed drm_bridge in struct dw_hdmi

The drm_bridge instance is always needed, there's no point in allocating
it separately.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-5-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Remove unused function parameter

The 'prep' parameter passed to hdmi_phy_configure() is useless. It is
hardcoded as 0, and if set, simply prevents the configure function from
executing.

Remove it.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-4-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Remove unneeded arguments to bind/unbind functions

The master argument isn't used. The data argument, a void pointer, is
used by the bind function only where it's cast to a drm_device pointer,
which can easily be obtained from the encoder argument instead. Remove
them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-3-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: dw-hdmi: Merge __hdmi_phy_i2c_write and hdmi_phy_i2c_write

The latter is just an int wrapper around the former void function that
unconditionally returns 0. As the return value is never checked, merge
the two functions into one.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-2-laurent.pinchart+renesas@ideasonboard.com

drm: qxl: Let DRM core handle connector registering

Registering the connector explicitly right after creation is not
necessary for modesetting drivers, because drm_dev_register already takes
care of this on the core side, by calling drm_modeset_register_all.

In addition, performing the initialization too early will get in the way
of the load() hook removal, because the connector interface cannot be
published prior to registering the minors.

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
CC: Dave Airlie <airlied@redhat.com>
CC: Daniel Vetter <daniel.vetter@ffwll.ch>
CC: dri-devel@lists.freedesktop.org
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170112161610.19924-1-krisman@collabora.co.uk

drm/bridge: adv7511: Initialize regulators

Maintain a table of regulator names expected by ADV7511 and ADV7533.
Use regulator_bulk_* api to configure these.

Initialize and enable the regulators during probe itself. Controlling
these dynamically is left for later.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484117547-26417-3-git-send-email-architt@codeaurora.org

dt-bindings: drm/bridge: adv7511: Add regulator bindings

Add the regulator supply properties needed by ADV7511 and ADV7533.

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484117547-26417-2-git-send-email-architt@codeaurora.org

drm/tegra: Stop using drm_framebuffer_unregister_private

This is the deprecated function for when you embedded the framebuffer
somewhere else (which breaks refcounting). But Tegra is using
drm_framebuffer_remove and a free-standing FB, so this is redundant.

One caveat here is that the failure path in the init code still
manually cleaned up the fb. I presume that was an oversight and
changed it over to drm_framebuffer_remove too.

Cc: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482835765-12044-5-git-send-email-daniel.vetter@ffwll.ch
Link: http://patchwork.freedesktop.org/patch/msgid/1482835765-12044-2-git-send-email-daniel.vetter@ffwll.ch

drm/cma-helper: Stop using drm_framebuffer_unregister_private

This is the deprecated function for when you embedded the framebuffer
somewhere else (which breaks refcounting). But cma helpers are using
drm_framebuffer_remove and a free-standing fb, so this is rendundant.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482835765-12044-2-git-send-email-daniel.vetter@ffwll.ch

drm/omap: Stop using drm_framebuffer_unregister_private

This is the deprecated function for when you embedded the framebuffer
somewhere else (which breaks refcounting). But omapdrm is using
drm_framebuffer_remove and a free-standing fb, so this is rendundant.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482835765-12044-4-git-send-email-daniel.vetter@ffwll.ch

drm: fix MMU dependencies

DRM_VM and DRM_LEGACY shouldn't be selected if MMU isn't set.

Fixes: 62a0d98a188c ("drm: allow to use mmuless SoC")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1484211456-5759-1-git-send-email-benjamin.gaignard@linaro.org

drm/msm: Stop using drm_framebuffer_unregister_private

This is the deprecated function for when you embedded the framebuffer
somewhere else (which breaks refcounting). But msm is using
drm_framebuffer_remove and a free-standing fb, so this is rendundant.

Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482835765-12044-1-git-send-email-daniel.vetter@ffwll.ch

drm/atomic: Add target_vblank support in atomic helpers (v2)

Allows usage of the new page_flip_target hook for drivers implementing
the atomic path.
Provides default atomic helper for the new hook.

v2:
Update code sharing logic between exsiting and the new flip hooks.
Improve kerneldoc.

Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1483735180-4173-1-git-send-email-Andrey.Grodzovsky@amd.com

drm: add fourcc codes for 16bit R and RG

This adds fourcc codes for 16bit planes required for DRM buffer
export to mesa.

Signed-off-by: Rainer Hochecker <fernetmenta@online.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20170104183855.3852-1-fernetmenta@kodi.tv
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm: add more MMU dependencies

Many DRM drivers only work with an MMU, and after the patch to enable
core DRM support without MMU, we already had one fixup for many of them.
The etnaviv, armada and msm drivers were missed and have the same problem:

warning: (DRM_ETNAVIV) selects IOMMU_SUPPORT which has unmet direct dependencies (MMU)
warning: (DRM_I915 && DRM_MSM && DRM_ETNAVIV) selects SHMEM which has unmet direct dependencies (MMU)
drivers/gpu/drm/armada/armada_gem.o: In function `armada_gem_vm_fault':
armada_gem.c:(.text.armada_gem_vm_fault+0x14): undefined reference to `vm_insert_pfn'
arch/arm/mm/dma-mapping.c: In function '__iommu_alloc_remap':
arch/arm/mm/dma-mapping.c:1390:4: error: 'VM_ARM_DMA_CONSISTENT' undeclared (first use in this function)
arch/arm/mm/dma-mapping.c:1456:31: error: 'atomic_pool' undeclared (first use in this function); did you mean 'atomic_xor'?

Fixes: 011cda589938 ("drm: fix compilations issues introduced by "drm: allow to use mmuless SoC"")
Fixes: 62a0d98a188c ("drm: allow to use mmuless SoC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111133357.3664191-2-arnd@arndb.de

drm: Fix error handling in drm_mm eviction kselftest

        drivers/gpu/drm/selftests/test-drm_mm.c:1277 evict_everything()
        warn: calling list_del() inside list_for_each

The list_del() inside the error handling in the eviction loop is
overkill. We have to undo the eviction scan to return the drm_mm back to
a recoverable state, so have to iterate over the full list, but we only
want to report the error once and once we have an error we can return
early.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 560b32842912 ("drm: kselftest for drm_mm and eviction")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110144031.7609-1-chris@chris-wilson.co.uk

drm/exynos: constify exynos_drm_crtc_ops structures

Declare exynos_drm_crtc_ops structures as const as they are only passed
as an argument to the function exynos_drm_crtc_create. This argument is
of type const struct exynos_drm_crtc_ops *, so exynos_drm_crtc_ops
structures having this property can be declared const.
Done using Coccinelle:

@r disable optional_qualifier@
identifier i;
position p;
@@
static struct exynos_drm_crtc_ops i@p={...};

@ok@
position p;
identifier r.i;
@@
exynos_drm_crtc_create(...,&i@p,...)

@bad@
position p!={r.p,ok.p};
identifier r.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
+const
struct exynos_drm_crtc_ops i;

File size before:
   text    data     bss     dec     hex filename
   5008     280       0    5288    14a8 exynos/exynos5433_drm_decon.o

File size after:
   text    data     bss     dec     hex filename
   5120     176       0    5296    14b0 exynos/exynos5433_drm_decon.o

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1483984493-25284-1-git-send-email-bhumirks@gmail.com

drm: Move drm_clflush prototypes to drm_cache header file

Continue to clean up drmP.h by moving the cache flushing functions into
it's own header file.

Compile-tested only

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109215649.6860-2-krisman@collabora.co.uk

drm: Document drm_cache interface

Notice that this uncovers an issue with the kernel-doc handling of array
arguments, causing the first parameter of drm_clflush_pages() to not
show up in the rst-generated page.  A proposed fix is under review in
linux-doc: <http://www.spinics.net/lists/linux-doc/msg42544.html>

Changes since v1:
 - Add section to drm-mm.rst.
 - Fix kernel-doc style issues.
 - s/memory/kernel memory/.

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109215649.6860-1-krisman@collabora.co.uk

Merge tag 'drm-misc-next-2017-01-09' of git://anongit.freedesktop.org/git/drm-misc into drm-next

Back to regular -misc pulls with reasonable sizes:
- dma_fence error clarification (Chris)
- drm_crtc_from_index helper (Shawn), pile more patches on the m-l to roll
  this out to drivers
- mmu-less support for fbdev helpers from Benjamin
- piles of kerneldoc work
- some polish for crc support from Tomeu and Benjamin
- odd misc stuff all over

* tag 'drm-misc-next-2017-01-09' of git://anongit.freedesktop.org/git/drm-misc: (48 commits)
  dma-fence: Introduce drm_fence_set_error() helper
  dma-fence: Wrap querying the fence->status
  dma-fence: Clear fence->status during dma_fence_init()
  drm: fix compilations issues introduced by "drm: allow to use mmuless SoC"
  drm: Change the return type of the unload hook to void
  drm: add more document for drm_crtc_from_index()
  drm: remove useless parameters from drm_pick_cmdline_mode function
  drm: crc: Call wake_up_interruptible() each time there is a new CRC entry
  drm: allow to use mmuless SoC
  drm: compile drm_vm.c only when needed
  fbmem: add a default get_fb_unmapped_area function
  drm: crc: Wait for a frame before returning from open()
  drm: Move locking into drm_debugfs_crtc_crc_add
  drm/imx: imx-tve: Remove unused variable
  Revert "drm: nouveau: fix build when LEDS_CLASS=m"
  drm: Add kernel-doc for drm_crtc_commit_get/put
  drm/atomic: Fix outdated comment.
  drm: reference count event->completion
  gpu: drm: mgag200: mgag200_main:- Handle error from pci_iomap
  drm: Document deprecated load/unload hook
  ...

Merge tag 'drm-intel-next-2017-01-09' of git://anongit.freedesktop.org/git/drm-intel into drm-next

More 4.11 stuff, holidays edition (i.e. not much):

- docs and cleanups for shared dpll code (Ander)
- some kerneldoc work (Chris)
- fbc by default on gen9+ too, yeah! (Paulo)
- fixes, polish and other small things all over gem code (Chris)
- and a few small things on top

Plus a backmerge, because Dave was enjoying time off too.

* tag 'drm-intel-next-2017-01-09' of git://anongit.freedesktop.org/git/drm-intel: (275 commits)
  drm/i915: Update DRIVER_DATE to 20170109
  drm/i915: Drain freed objects for mmap space exhaustion
  drm/i915: Purge loose pages if we run out of DMA remap space
  drm/i915: Fix phys pwrite for struct_mutex-less operation
  drm/i915: Simplify testing for am-I-the-kernel-context?
  drm/i915: Use range_overflows()
  drm/i915: Use fixed-sized types for stolen
  drm/i915: Use phys_addr_t for the address of stolen memory
  drm/i915: Consolidate checks for memcpy-from-wc support
  drm/i915: Only skip requests once a context is banned
  drm/i915: Move a few more utility macros to i915_utils.h
  drm/i915: Clear ret before unbinding in i915_gem_evict_something()
  drm/i915/guc: Exclude the upper end of the Global GTT for the GuC
  drm/i915: Move a few utility macros into a separate header
  drm/i915/execlists: Reorder execlists register enabling
  drm/i915: Assert that we do create the deferred context
  drm/i915: Assert all timeline requests are gone before fini
  drm/i915: Revoke fenced GTT mmapings across GPU reset
  drm/i915: enable FBC on gen9+ too
  drm/i915: actually drive the BDW reserved IDs
  ...

dma-fence: Introduce drm_fence_set_error() helper

The dma_fence.error field (formerly known as dma_fence.status) is an
optional field that may be set by drivers before calling
dma_fence_signal(). The field can be used to indicate that the fence was
completed in err rather than with success, and is visible to other
consumers of the fence and to userspace via sync_file.

This patch renames the field from status to error so that its meaning is
hopefully more clear (and distinct from dma_fence_get_status() which is
a composite between the error state and signal state) and adds a helper
that validates the preconditions of when it is suitable to adjust the
error field.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170104141222.6992-3-chris@chris-wilson.co.uk

dma-fence: Wrap querying the fence->status

The fence->status is an optional field that is only valid once the fence
has been signaled. (Driver may fill the fence->status with an error code
prior to calling dma_fence_signal().) Given the restriction upon its
validity, wrap querying of the fence->status into a helper
dma_fence_get_status().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170104141222.6992-2-chris@chris-wilson.co.uk

dma-fence: Clear fence->status during dma_fence_init()

As the fence->status is an optional field that may be set before
dma_fence_signal() is called to convey that the fence completed with an
error, we have to ensure that it is always set to zero on initialisation
so that the typical use (i.e. unset) always flags a successful completion.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170104141222.6992-1-chris@chris-wilson.co.uk

drm: fix compilations issues introduced by "drm: allow to use mmuless SoC"

Removing MMU configuration flag from DRM make few automatic
build failed when they answer yes to all flags.

Add asm/vga.h file on Blackfin architecture to not broke compilation.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Fixes: 62a0d98a188c ("drm: allow to use mmuless SoC")
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1483789151-6603-1-git-send-email-benjamin.gaignard@linaro.org

drm: Change the return type of the unload hook to void

The integer returned by the unload hook is ignored by the drm core, so
let's make it void.

This patch was created using the following Coccinelle semantic script
(except for the declaration and comment in drm_drv.h):

Compile-tested only.

// <smpl>
@ get_name @
struct drm_driver drv;
identifier fn;
@@
drv.unload = fn;

@ replace_type @
identifier get_name.fn;
@@
- int
+ void
fn (...)
{
...
}

@ remove_return_param @
identifier get_name.fn;
@@
void fn (...)
{
<...
if (...)
return
- ...
;
...>
 }

@ drop_final_return @
identifier get_name.fn;
@@
void fn (...)
{
...

- return 0;
}
// </smpl>

Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Acked-by: Christian König <christian.koenig@amd.com>.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170106175731.29196-1-krisman@collabora.co.uk

drm: add more document for drm_crtc_from_index()

Add a bit more document for function drm_crtc_from_index() to cross
link it with drm_crtc_from_index(), and explain that the function is
useful in vblank code.

While at it, add cross link comment for drm_plane_from_index() as well.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1483779131-19935-1-git-send-email-shawnguo@kernel.org

drm: remove useless parameters from drm_pick_cmdline_mode function

drm_pick_cmdline_mode width and height parameters are useless.
Just remove them.

Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1483721084-20278-2-git-send-email-vincent.abriou@st.com

drm/i915: Update DRIVER_DATE to 20170109

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Merge tag 'drm-misc-next-2016-12-30' of git://anongit.freedesktop.org/git/drm-misc into drm-next

First -misc pull for 4.11:
- drm_mm rework + lots of selftests (Chris Wilson)
- new connector_list locking+iterators
- plenty of kerneldoc updates
- format handling rework from Ville
- atomic helper changes from Maarten for better plane corner-case handling
  in drivers, plus the i915 legacy cursor patch that needs this
- bridge cleanup from Laurent
- plus plenty of small stuff all over
- also contains a merge of the 4.10 docs tree so that we could apply the
  dma-buf kerneldoc patches

It's a lot more than usual, but due to the merge window blackout it also
covers about 4 weeks, so all in line again on a per-week basis. The more
annoying part with no pull request for 4 weeks is managing cross-tree
work. The -intel pull request I'll follow up with does conflict quite a
bit with -misc here. Longer-term (if drm-misc keeps growing) a
drm-next-queued to accept pull request for the next merge window during
this time might be useful.

I'd also like to backmerge -rc2+this into drm-intel next week, we have
quite a pile of patches waiting for the stuff in here.

* tag 'drm-misc-next-2016-12-30' of git://anongit.freedesktop.org/git/drm-misc: (126 commits)
  drm: Add kerneldoc markup for new @scan parameters in drm_mm
  drm/mm: Document locking rules
  drm: Use drm_mm_insert_node_in_range_generic() for everyone
  drm: Apply range restriction after color adjustment when allocation
  drm: Wrap drm_mm_node.hole_follows
  drm: Apply tight eviction scanning to color_adjust
  drm: Simplify drm_mm scan-list manipulation
  drm: Optimise power-of-two alignments in drm_mm_scan_add_block()
  drm: Compute tight evictions for drm_mm_scan
  drm: Fix application of color vs range restriction when scanning drm_mm
  drm: Unconditionally do the range check in drm_mm_scan_add_block()
  drm: Rename prev_node to hole in drm_mm_scan_add_block()
  drm: Fix O= out-of-tree builds for selftests
  drm: Extract struct drm_mm_scan from struct drm_mm
  drm: Add asserts to catch overflow in drm_mm_init() and drm_mm_init_scan()
  drm: Simplify drm_mm_clean()
  drm: Detect overflow in drm_mm_reserve_node()
  drm: Fix kerneldoc for drm_mm_scan_remove_block()
  drm: Promote drm_mm alignment to u64
  drm: kselftest for drm_mm and restricted color eviction
  ...

Linux 4.10-rc3

Merge tag 'usb-4.10-rc3' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a bunch of USB fixes for 4.10-rc3. Yeah, it's a lot, an
  artifact of the holiday break I think.

  Lots of gadget and the usual XHCI fixups for reported issues (one day
  that driver will calm down...) Also included are a bunch of usb-serial
  driver fixes, and for good measure, a number of much-reported MUSB
  driver issues have finally been resolved.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (72 commits)
  USB: fix problems with duplicate endpoint addresses
  usb: ohci-at91: use descriptor-based gpio APIs correctly
  usb: storage: unusual_uas: Add JMicron JMS56x to unusual device
  usb: hub: Move hub_port_disable() to fix warning if PM is disabled
  usb: musb: blackfin: add bfin_fifo_offset in bfin_ops
  usb: musb: fix compilation warning on unused function
  usb: musb: Fix trying to free already-free IRQ 4
  usb: musb: dsps: implement clear_ep_rxintr() callback
  usb: musb: core: add clear_ep_rxintr() to musb_platform_ops
  USB: serial: ti_usb_3410_5052: fix NULL-deref at open
  USB: serial: spcp8x5: fix NULL-deref at open
  USB: serial: quatech2: fix sleep-while-atomic in close
  USB: serial: pl2303: fix NULL-deref at open
  USB: serial: oti6858: fix NULL-deref at open
  USB: serial: omninet: fix NULL-derefs at open and disconnect
  USB: serial: mos7840: fix misleading interrupt-URB comment
  USB: serial: mos7840: remove unused write URB
  USB: serial: mos7840: fix NULL-deref at open
  USB: serial: mos7720: remove obsolete port initialisation
  USB: serial: mos7720: fix parallel probe
  ...

Merge tag 'char-misc-4.10-rc3' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc fixes from Greg KH:
 "Here are a few small char/misc driver fixes for 4.10-rc3.

  Two MEI driver fixes, and three NVMEM patches for reported issues, and
  a new Hyper-V driver MAINTAINER update. Nothing major at all, all have
  been in linux-next with no reported issues"

* tag 'char-misc-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  hyper-v: Add myself as additional MAINTAINER
  nvmem: fix nvmem_cell_read() return type doc
  nvmem: imx-ocotp: Fix wrong register size
  nvmem: qfprom: Allow single byte accesses for read/write
  mei: move write cb to completion on credentials failures
  mei: bus: fix mei_cldev_enable KDoc

Merge tag 'staging-4.10-rc3' of git://git./linux/kernel/git/gregkh/staging

Pull staging/IIO fixes from Greg KH:
 "Here are some staging and IIO driver fixes for 4.10-rc3.

  Most of these are minor IIO fixes of reported issues, along with one
  network driver fix to resolve an issue. And a MAINTAINERS update with
  a new mailing list. All of these, except the MAINTAINERS file update,
  have been in linux-next with no reported issues (the MAINTAINERS patch
  happened on Friday...)"

* tag 'staging-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  MAINTAINERS: add greybus subsystem mailing list
  staging: octeon: Call SET_NETDEV_DEV()
  iio: accel: st_accel: fix LIS3LV02 reading and scaling
  iio: common: st_sensors: fix channel data parsing
  iio: max44000: correct value in illuminance_integration_time_available
  iio: adc: TI_AM335X_ADC should depend on HAS_DMA
  iio: bmi160: Fix time needed to sleep after command execution
  iio: 104-quad-8: Fix active level mismatch for the preset enable option
  iio: 104-quad-8: Fix off-by-one errors when addressing IOR
  iio: 104-quad-8: Fix index control configuration

mm: workingset: fix use-after-free in shadow node shrinker

Several people report seeing warnings about inconsistent radix tree
nodes followed by crashes in the workingset code, which all looked like
use-after-free access from the shadow node shrinker.

Dave Jones managed to reproduce the issue with a debug patch applied,
which confirmed that the radix tree shrinking indeed frees shadow nodes
while they are still linked to the shadow LRU:

  WARNING: CPU: 2 PID: 53 at lib/radix-tree.c:643 delete_node+0x1e4/0x200
  CPU: 2 PID: 53 Comm: kswapd0 Not tainted 4.10.0-rc2-think+ #3
  Call Trace:
     delete_node+0x1e4/0x200
     __radix_tree_delete_node+0xd/0x10
     shadow_lru_isolate+0xe6/0x220
     __list_lru_walk_one.isra.4+0x9b/0x190
     list_lru_walk_one+0x23/0x30
     scan_shadow_nodes+0x2e/0x40
     shrink_slab.part.44+0x23d/0x5d0
     shrink_node+0x22c/0x330
     kswapd+0x392/0x8f0

This is the WARN_ON_ONCE(!list_empty(&node->private_list)) placed in the
inlined radix_tree_shrink().

The problem is with 14b468791fa9 ("mm: workingset: move shadow entry
tracking to radix tree exceptional tracking"), which passes an update
callback into the radix tree to link and unlink shadow leaf nodes when
tree entries change, but forgot to pass the callback when reclaiming a
shadow node.

While the reclaimed shadow node itself is unlinked by the shrinker, its
deletion from the tree can cause the left-most leaf node in the tree to
be shrunk.  If that happens to be a shadow node as well, we don't unlink
it from the LRU as we should.

Consider this tree, where the s are shadow entries:

       root->rnode
            |
       [0       n]
        |       |
     [s    ] [sssss]

Now the shadow node shrinker reclaims the rightmost leaf node through
the shadow node LRU:

       root->rnode
            |
       [0        ]
        |
    [s     ]

Because the parent of the deleted node is the first level below the
root and has only one child in the left-most slot, the intermediate
level is shrunk and the node containing the single shadow is put in
its place:

       root->rnode
            |
       [s        ]

The shrinker again sees a single left-most slot in a first level node
and thus decides to store the shadow in root->rnode directly and free
the node - which is a leaf node on the shadow node LRU.

  root->rnode
       |
       s

Without the update callback, the freed node remains on the shadow LRU,
where it causes later shrinker runs to crash.

Pass the node updater callback into __radix_tree_delete_node() in case
the deletion causes the left-most branch in the tree to collapse too.

Also add warnings when linked nodes are freed right away, rather than
wait for the use-after-free when the list is scanned much later.

Fixes: 14b468791fa9 ("mm: workingset: move shadow entry tracking to radix tree exceptional tracking")
Reported-by: Dave Chinner <david@fromorbit.com>
Reported-by: Hugh Dickins <hughd@google.com>
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-and-tested-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chris Leech <cleech@redhat.com>
Cc: Lee Duncan <lduncan@suse.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <mawilcox@linuxonhyperv.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: stop leaking PageTables

4.10-rc loadtest (even on x86, and even without THPCache) fails with
"fork: Cannot allocate memory" or some such; and /proc/meminfo shows
PageTables growing.

Commit 953c66c2b22a ("mm: THP page cache support for ppc64") that got
merged in rc1 removed the freeing of an unused preallocated pagetable
after do_fault_around() has called map_pages().

This is usually a good optimization, so that the followup doesn't have
to reallocate one; but it's not sufficient to shift the freeing into
alloc_set_pte(), since there are failure cases (most commonly
VM_FAULT_RETRY) which never reach finish_fault().

Check and free it at the outer level in do_fault(), then we don't need
to worry in alloc_set_pte(), and can restore that to how it was (I
cannot find any reason to pte_free() under lock as it was doing).

And fix a separate pagetable leak, or crash, introduced by the same
change, that could only show up on some ppc64: why does do_set_pmd()'s
failure case attempt to withdraw a pagetable when it never deposited
one, at the same time overwriting (so leaking) the vmf->prealloc_pte?
Residue of an earlier implementation, perhaps? Delete it.

Fixes: 953c66c2b22a ("mm: THP page cache support for ppc64")
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'rc-fixes' of git://git./linux/kernel/git/mmarek/kbuild

Pull kbuild fix from Michal Marek:
 "The asm-prototypes.h file added in the last merge window results in
  invalid code with CONFIG_KMEMCHECK=y. The net result is that genksyms
  segfaults.

  This pull request fixes the header, the genksyms fix is in my kbuild
  branch for 4.11"

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  asm-prototypes: Clear any CPP defines before declaring the functions