input: edt-ft5x06: Only look at the number of points reported

Register 0x02 in the FT5x06 is TD_STATUS containing the number
of valid touch points being reported.

Iterate over that number of points rather than all that are
supported on the device.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

Revert "dtoverlays: Drop i2c baudrate for Pi 7inch DSI screen to 50kHz"

This reverts commit 0c41710df564f76275c2868beaa0c316553e8247.

The regulator driver is now hopefully fixed, therefore revert the
workaround that dropped the I2C frequency.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

regulator/rpi-panel-attiny: Use two transactions for I2C read

The I2C to the Atmel is very fussy, and locks up easily on
Pi0-3 particularly on reads.
If running at 100kHz on Pi3, reading the ID register generally
locks up the Atmel, but splitting the register select write and
read into two transactions is reliable.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

regulator/rpi-panel-attiny: Don't read the LCD power status

The I2C to the Atmel is very fussy, and locks up easily on
Pi0-3 particularly on reads.

The LCD power status is controlled solely by this driver, so
rather than reading it back from the Atmel, use the cached
status last set.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

drivers: bcm2835_unicam: Add logging message when a frame is dropped.

If a dummy buffer is still active on a frame start, it indicates that this frame
will be dropped. The explicit logging helps users identify performance issues.

Signed-off-by: Naushir Patuck <naush@raspberrypi.com>

staging/bcm2835-codec: Allow a different stride alignment per role

Deinterlace and decode aren't affected in the same way as encode
and ISP by the alignment requirement on 3 plane YUV420.
Decode would be affected, but it always aligns the height up to
a macroblock, and uses the selection API to reflect that.

Add in the facility to set the bytesperline alignment per role.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

media: rpivid: remove min_buffers_needed from src queue

Remove min_buffers_needed=1 from src queue init. Src buffers are bound
to media requests therefore this setting is not needed and generates
a WARN in kernel 5.16.

Signed-off-by: John Cox <jc@kynesim.co.uk>

Merge remote-tracking branch 'stable/linux-5.10.y' into rpi-5.10.y

staging/bcm2835-codec: bytesperline for YUV420/YVU420 needs to be 64

Matching https://github.com/raspberrypi/linux/pull/4419, the ISP
block (which is also used on the input of the encoder, and output
of the decoder) needs the base address of all planes to be aligned
to multiples of 32. This includes the chroma planes of YUV420 and
YVU420.
If the height is only a multiple of 2 (not 4), then you get an odd
number of lines in the second plane, which means the 3rd plane
starts at a multiple of bytesperline/2.

Set the minimum bytesperline alignment to 64 for those formats
so that the plane alignment is always right.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

drm/vc4: Use dev_err_probe when logging error registering HDMI audio

Avoid logging a spurious error message with error -517
(-EPROBE_DEFER) whilst trying to load HDMI audio.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

dtoverlays: Drop i2c baudrate for Pi 7inch DSI screen to 50kHz

Whilst investigations continue as to why the 7" DSI screen doesn't
work on Pi3 with KMS, drop the I2C baudrate to 50kHz as that seems
to be a reliable workaround.
This will be reverted once the full issue is understood.

https://github.com/raspberrypi/linux/issues/4686

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

dtoverlays: Use edt-ft5506 for 10 points, instead of edt-ft5x06

Whilst all the datasheets describe FT5x06 as supporting "up to
10 points of absolution X and Y coordinates", the driver
implementation for the compatible string "edt,edt-ft5x06" only
allows for 5.

Switch to the "edt,edt-ft5506" compatible string which allows for
10 points with no other differences.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

input: edt-ft5x06: Handle unreliable TOUCH_UP events

The ft5x06 is unreliable in sending touch up events, so some
touch IDs can become stuck in the detected state.

Ensure that IDs that are unreported by the controller are
released.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

ARM: dts: Update rpi-400 and cm4 dts to match 4-b

The Pi 4B dts file has had numerous updates since the Pi 400 and CM4
dts files were written. Apply those updates to the other files to
minimise the differences. The change is largely cosmetic, except for
the PCI "device-type" to "device_type" rename, and the correction of
the labels on the Pi 400 GPIO expander pins.

Also set the wifi-2.4ghz-coexistence property on RPi 4 B, which appears
to have been missed.

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

ARM: dts: gpio-ranges property is now required

Since [1], added in 5.7, the absence of a gpio-ranges property has
prevented GPIOs from being restored to inputs when released.

See: https://forums.raspberrypi.com/viewtopic.php?t=324585

[1] commit 2ab73c6d8323 ("gpio: Support GPIO controllers without
    pin-ranges")

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

drm/vc4: Ensure vc4_hdmi doesn't use 2711 HPD registers on Pi0-3

The existing logic was flawed in that it could try reading the
2711 specific registers for HPD on a CM1/3 where the HPD GPIO
hadn't been defined in DT.

Ensure we don't do the 2711 register read on invalid hardware,
and then

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

drm/vc4: Add support for composite syncs to vc4_dpi

The hardware can combine H&V syncs onto the output enable line
as composite syncs, so add the relevant configuration to do that.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

Linux 5.10.82

Link: https://lore.kernel.org/r/20211124115702.361983534@linuxfoundation.org
Tested-by: Fox Chen <foxhlchen@gmail.com>
Link: https://lore.kernel.org/r/20211125092029.973858485@linuxfoundation.org
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Hulk Robot <hulkrobot@huawei.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "perf: Rework perf_event_exit_event()"

This reverts commit 94902ee2996a7f71471138093495df452dab87b6 which is
upstream commit ef54c1a476aef7eef26fe13ea10dc090952c00f8.

Reverting for now due to issues that need to get fixed upstream.

Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: hdac_stream: fix potential locking issue in snd_hdac_stream_assign()

commit 1465d06a6d8580e73ae65f8590392df58c5ed2fd upstream.

The fields 'opened', 'running', 'assigned_key' are all protected by a
spinlock, but the spinlock is not taken when looking for a
stream. This can result in a possible race between assign() and
release().

Fix by taking the spinlock before walking through the bus stream list.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210924192417.169243-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Scott Bruce <smbruce@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: hdac_ext_stream: fix potential locking issues

commit 868ddfcef31ff93ea8961b2e81ea7fe12f6f144b upstream.

The code for hdac_ext_stream seems inherited from hdac_stream, and
similar locking issues are present: the use of the bus->reg_lock
spinlock is inconsistent, with only writes to specific fields being
protected.

Apply similar fix as in hdac_stream by protecting all accesses to
'link_locked' and 'decoupled' fields, with a new helper
snd_hdac_ext_stream_decouple_locked() added to simplify code
changes.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210924192417.169243-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/Kconfig: Fix an unused variable error in dell-smm-hwmon

commit ef775a0e36c6a81c5b07cb228c02f967133fe768 upstream.

When CONFIG_PROC_FS is not set, there is a build warning (turned
into an error):

  ../drivers/hwmon/dell-smm-hwmon.c: In function 'i8k_init_procfs':
  ../drivers/hwmon/dell-smm-hwmon.c:624:24: error: unused variable 'data' [-Werror=unused-variable]
    struct dell_smm_data *data = dev_get_drvdata(dev);

Make I8K depend on PROC_FS and HWMON (instead of selecting HWMON -- it
is strongly preferred to not select entire subsystems).

Build tested in all possible combinations of SENSORS_DELL_SMM, I8K, and
PROC_FS.

Fixes: 039ae58503f3 ("hwmon: Allow to compile dell-smm-hwmon driver without /proc/i8k")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lkml.kernel.org/r/20210910071921.16777-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: update device path inode time instead of bd_inode

commit 54fde91f52f515e0b1514f0f0fa146e87a672227 upstream.

Christoph pointed out that I'm updating bdev->bd_inode for the device
time when we remove block devices from a btrfs file system, however this
isn't actually exposed to anything.  The inode we want to update is the
one that's associated with the path to the device, usually on devtmpfs,
so that blkid notices the difference.

We still don't want to do the blkdev_open, so use kern_path() to get the
path to the given device and do the update time on that inode.

Fixes: 8f96a5bfa150 ("btrfs: update the bdev time directly when closing")
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: export an inode_update_time helper

commit e60feb445fce9e51c1558a6aa7faf9dd5ded533b upstream.

If you already have an inode and need to update the time on the inode
there is no way to do this properly.  Export this helper to allow file
systems to update time on the inode so the appropriate handler is
called, either ->update_time or generic_update_time.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ice: Delete always true check of PF pointer

commit 2ff04286a9569675948f39cec2c6ad47c3584633 upstream.

PF pointer is always valid when PCI core calls its .shutdown() and
.remove() callbacks. There is no need to check it again.

Fixes: 837f08fdecbe ("ice: Add basic driver framework for Intel(R) E800 Series")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: max-3421: Use driver data instead of maintaining a list of bound devices

commit fc153aba3ef371d0d76eb88230ed4e0dee5b38f2 upstream.

Instead of maintaining a single-linked list of devices that must be
searched linearly in .remove() just use spi_set_drvdata() to remember the
link between the spi device and the driver struct. Then the global list
and the next member can be dropped.

This simplifies the driver, reduces the memory footprint and the time to
search the list. Also it makes obvious that there is always a corresponding
driver struct for a given device in .remove(), so the error path for
!max3421_hcd can be dropped, too.

As a side effect this fixes a data inconsistency when .probe() races with
itself for a second max3421 device in manipulating max3421_hcd_list. A
similar race is fixed in .remove(), too.

Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211018204028.2914597-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: DAPM: Cover regression by kctl change notification fix

commit 827b0913a9d9d07a0c3e559dbb20ca4d6d285a54 upstream.

The recent fix for DAPM to correct the kctl change notification by the
commit 5af82c81b2c4 ("ASoC: DAPM: Fix missing kctl change
notifications") caused other regressions since it changed the behavior
of snd_soc_dapm_set_pin() that is called from several API functions.
Formerly it returned always 0 for success, but now it returns 0 or 1.

This patch addresses it, restoring the old behavior of
snd_soc_dapm_set_pin() while keeping the fix in
snd_soc_dapm_put_pin_switch().

Fixes: 5af82c81b2c4 ("ASoC: DAPM: Fix missing kctl change notifications")
Reported-by: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20211105090925.20575-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: fix NULL-pointer dereference when hashtab allocation fails

commit dc27f3c5d10c58069672215787a96b4fae01818b upstream.

When the hash table slot array allocation fails in hashtab_init(),
h->size is left initialized with a non-zero value, but the h->htable
pointer is NULL. This may then cause a NULL pointer dereference, since
the policydb code relies on the assumption that even after a failed
hashtab_init(), hashtab_map() and hashtab_destroy() can be safely called
on it. Yet, these detect an empty hashtab only by looking at the size.

Fix this by making sure that hashtab_init() always leaves behind a valid
empty hashtab when the allocation fails.

Cc: stable@vger.kernel.org
Fixes: 03414a49ad5f ("selinux: do not allocate hashtabs dynamically")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/netlink: Add __maybe_unused to static inline in C file

commit 83dde7498fefeb920b1def317421262317d178e5 upstream.

Like other commits in the tree add __maybe_unused to a static inline in a
C file because some clang compilers will complain about unused code:

>> drivers/infiniband/core/nldev.c:2543:1: warning: unused function '__chk_RDMA_NL_NLDEV'
   MODULE_ALIAS_RDMA_NETLINK(RDMA_NL_NLDEV, 5);
   ^

Fixes: e3bf14bdc17a ("rdma: Autoload netlink client modules")
Link: https://lore.kernel.org/r/4a8101919b765e01d7fde6f27fd572c958deeb4a.1636267207.git.leonro@nvidia.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hugetlbfs: flush TLBs correctly after huge_pmd_unshare

commit a4a118f2eead1d6c49e00765de89878288d4b890 upstream.

When __unmap_hugepage_range() calls to huge_pmd_unshare() succeed, a TLB
flush is missing.  This TLB flush must be performed before releasing the
i_mmap_rwsem, in order to prevent an unshared PMDs page from being
released and reused before the TLB flush took place.

Arguably, a comprehensive solution would use mmu_gather interface to
batch the TLB flushes and the PMDs page release, however it is not an
easy solution: (1) try_to_unmap_one() and try_to_migrate_one() also call
huge_pmd_unshare() and they cannot use the mmu_gather interface; and (2)
deferring the release of the page reference for the PMDs page until
after i_mmap_rwsem is dropeed can confuse huge_pmd_unshare() into
thinking PMDs are shared when they are not.

Fix __unmap_hugepage_range() by adding the missing TLB flush, and
forcing a flush when unshare is successful.

Fixes: 24669e58477e ("hugetlb: use mmu_gather instead of a temporary linked list for accumulating pages)" # 3.6
Signed-off-by: Nadav Amit <namit@vmware.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ufs: core: Fix task management completion timeout race

commit 886fe2915cce6658b0fc19e64b82879325de61ea upstream.

__ufshcd_issue_tm_cmd() clears req->end_io_data after timing out, which
races with the completion function ufshcd_tmc_handler() which expects
req->end_io_data to have a value.

Note __ufshcd_issue_tm_cmd() and ufshcd_tmc_handler() are already
synchronized using hba->tmf_rqs and hba->outstanding_tasks under the
host_lock spinlock.

It is also not necessary (nor typical) to clear req->end_io_data because
the block layer does it before allocating out requests e.g. via
blk_get_request().

So fix by not clearing it.

Link: https://lore.kernel.org/r/20211108064815.569494-2-adrian.hunter@intel.com
Fixes: f5ef336fd2e4 ("scsi: ufs: core: Fix task management completion")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[Adrian: Backport to v5.10]
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ufs: core: Fix task management completion

commit f5ef336fd2e4c36dedae4e7ca66cf5349d6fda62 upstream.

The UFS driver uses blk_mq_tagset_busy_iter() when identifying task
management requests to complete, however blk_mq_tagset_busy_iter() doesn't
work.

blk_mq_tagset_busy_iter() only iterates requests dispatched by the block
layer. That appears as if it might have started since commit 37f4a24c2469
("blk-mq: centralise related handling into blk_mq_get_driver_tag") which
removed 'data->hctx->tags->rqs[rq->tag] = rq' from blk_mq_rq_ctx_init()
which gets called:

blk_get_request
blk_mq_alloc_request
__blk_mq_alloc_request
blk_mq_rq_ctx_init

Since UFS task management requests are not dispatched by the block layer,
hctx->tags->rqs[rq->tag] remains NULL, and since blk_mq_tagset_busy_iter()
relies on finding requests using hctx->tags->rqs[rq->tag], UFS task
management requests are never found by blk_mq_tagset_busy_iter().

By using blk_mq_tagset_busy_iter(), the UFS driver was relying on internal
details of the block layer, which was fragile and subsequently got
broken. Fix by removing the use of blk_mq_tagset_busy_iter() and having the
driver keep track of task management requests.

Link: https://lore.kernel.org/r/20210922091059.4040-1-adrian.hunter@intel.com
Fixes: 1235fc569e0b ("scsi: ufs: core: Fix task management request completion timeout")
Fixes: 69a6c269c097 ("scsi: ufs: Use blk_{get,put}_request() to allocate and free TMFs")
Cc: stable@vger.kernel.org
Tested-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[Adrian: Backport to v5.10]
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: fix set scaling mode Full/Full aspect/Center not works on vga and dvi connectors

commit bf552083916a7f8800477b5986940d1c9a31b953 upstream.

amdgpu_connector_vga_get_modes missed function amdgpu_get_native_mode
which assign amdgpu_encoder->native_mode with *preferred_mode result in
amdgpu_encoder->native_mode.clock always be 0. That will cause
amdgpu_connector_set_property returned early on:
if ((rmx_type != DRM_MODE_SCALE_NONE) &&
(amdgpu_encoder->native_mode.clock == 0))
when we try to set scaling mode Full/Full aspect/Center.
Add the missing function to amdgpu_connector_vga_get_mode can fix this.
It also works on dvi connectors because
amdgpu_connector_dvi_helper_funcs.get_mode use the same method.

Signed-off-by: hongao <hongao@uniontech.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/dp: Ensure sink rate values are always valid

commit 6c34bd4532a3f39952952ddc102737595729afc4 upstream.

Atm, there are no sink rate values set for DP (vs. eDP) sinks until the
DPCD capabilities are successfully read from the sink. During this time
intel_dp->num_common_rates is 0 which can lead to a

intel_dp->common_rates[-1]    (*)

access, which is an undefined behaviour, in the following cases:

- In intel_dp_sync_state(), if the encoder is enabled without a sink
  connected to the encoder's connector (BIOS enabled a monitor, but the
  user unplugged the monitor until the driver loaded).
- In intel_dp_sync_state() if the encoder is enabled with a sink
  connected, but for some reason the DPCD read has failed.
- In intel_dp_compute_link_config() if modesetting a connector without
  a sink connected on it.
- In intel_dp_compute_link_config() if modesetting a connector with a
  a sink connected on it, but before probing the connector first.

To avoid the (*) access in all the above cases, make sure that the sink
rate table - and hence the common rate table - is always valid, by
setting a default minimum sink rate when registering the connector
before anything could use it.

I also considered setting all the DP link rates by default, so that
modesetting with higher resolution modes also succeeds in the last two
cases above. However in case a sink is not connected that would stop
working after the first modeset, due to the LT fallback logic. So this
would need more work, beyond the scope of this fix.

As I mentioned in the previous patch, I don't think the issue this patch
fixes is user visible, however it is an undefined behaviour by
definition and triggers a BUG() in CONFIG_UBSAN builds, hence CC:stable.

v2: Clear the default sink rates, before initializing these for eDP.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4297
References: https://gitlab.freedesktop.org/drm/intel/-/issues/4298
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018143417.1452632-1-imre.deak@intel.com
(cherry picked from commit 3f61ef9777c0ab0f03f4af0ed6fd3e5250537a8d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau: clean up all clients on device removal

commit f55aaf63bde0d0336c3823bb3713bd4a464abbcf upstream.

The postclose handler can run after the device has been removed (or the
driver has been unbound) since userspace clients are free to hold the
file open as long as they want. Because the device removal callback
frees the entire nouveau_drm structure, any reference to it in the
postclose handler will result in a use-after-free.

To reproduce this, one must simply open the device file, unbind the
driver (or physically remove the device), and then close the device
file. This was found and can be reproduced easily with the IGT
core_hotunplug tests.

To avoid this, all clients are cleaned up in the device finalization
rather than deferring it to the postclose handler, and the postclose
handler is protected by a critical section which ensures the
drm_dev_unplug() and the postclose handler won't race.

This is not an ideal fix, since as I understand the proposed plan for
the kernel<->userspace interface for hotplug support, destroying the
client before the file is closed will cause problems. However, I believe
to properly fix this issue, the lifetime of the nouveau_drm structure
needs to be extended to match the drm_device, and this proved to be a
rather invasive change. Thus, I've broken this out so the fix can be
easily backported.

This fixes with the two previous commits CVE-2020-27820 (Karol).

Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201125202648.5220-4-jcline@redhat.com
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/14
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau: use drm_dev_unplug() during device removal

commit aff2299e0d81b26304ccc6a1ec0170e437f38efc upstream.

Nouveau does not currently support hot-unplugging, but it still makes
sense to switch from drm_dev_unregister() to drm_dev_unplug().
drm_dev_unplug() calls drm_dev_unregister() after marking the device as
unplugged, but only after any device critical sections are finished.

Since nouveau isn't using drm_dev_enter() and drm_dev_exit(), there are
no critical sections so this is nearly functionally equivalent. However,
the DRM layer does check to see if the device is unplugged, and if it is
returns appropriate error codes.

In the future nouveau can add critical sections in order to truly
support hot-unplugging.

Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201125202648.5220-2-jcline@redhat.com
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/14
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau: Add a dedicated mutex for the clients list

commit abae9164a421bc4a41a3769f01ebcd1f9d955e0e upstream.

Rather than protecting the nouveau_drm clients list with the lock within
the "client" nouveau_cli, add a dedicated lock to serialize access to
the list. This is both clearer and necessary to avoid lockdep being
upset with us when we need to iterate through all the clients in the
list and potentially lock their mutex, which is the same class as the
lock protecting the entire list.

Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201125202648.5220-3-jcline@redhat.com
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/14
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/udl: fix control-message timeout

commit 5591c8f79db1729d9c5ac7f5b4d3a5c26e262d93 upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: 5320918b9a87 ("drm/udl: initial UDL driver (v4)")
Cc: stable@vger.kernel.org # 3.4
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025115353.5089-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Update swizzle mode enums

commit 58065a1e524de30df9a2d8214661d5d7eed0a2d9 upstream.

[Why]
Swizzle mode enum for DC_SW_VAR_R_X was existing,
but not mapped correctly.

[How]
Update mapping and conversion for DC_SW_VAR_R_X.

Reviewed-by: XiangBing Foo <XiangBing.Foo@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Cc: stable@vger.kernel.org
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cfg80211: call cfg80211_stop_ap when switch from P2P_GO type

commit 563fbefed46ae4c1f70cffb8eb54c02df480b2c2 upstream.

If the userspace tools switch from NL80211_IFTYPE_P2P_GO to
NL80211_IFTYPE_ADHOC via send_msg(NL80211_CMD_SET_INTERFACE), it
does not call the cleanup cfg80211_stop_ap(), this leads to the
initialization of in-use data. For example, this path re-init the
sdata->assigned_chanctx_list while it is still an element of
assigned_vifs list, and makes that linked list corrupt.

Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Reported-by: syzbot+bbf402b783eeb6d908db@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20211027173722.777287-1-phind.uet@gmail.com
Cc: stable@vger.kernel.org
Fixes: ac800140c20e ("cfg80211: .stop_ap when interface is going down")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc/sticon: fix reverse colors

commit bec05f33ebc1006899c6d3e59a00c58881fe7626 upstream.

sticon_build_attr() checked the reverse argument and flipped
background and foreground color, but returned the non-reverse
value afterwards. Fix this and also add two local variables
for foreground and background color to make the code easier
to read.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix memory ordering between normal and ordered work functions

commit 45da9c1767ac31857df572f0a909fbe88fd5a7e9 upstream.

Ordered work functions aren't guaranteed to be handled by the same thread
which executed the normal work functions. The only way execution between
normal/ordered functions is synchronized is via the WORK_DONE_BIT,
unfortunately the used bitops don't guarantee any ordering whatsoever.

This manifested as seemingly inexplicable crashes on ARM64, where
async_chunk::inode is seen as non-null in async_cow_submit which causes
submit_compressed_extents to be called and crash occurs because
async_chunk::inode suddenly became NULL. The call trace was similar to:

    pc : submit_compressed_extents+0x38/0x3d0
    lr : async_cow_submit+0x50/0xd0
    sp : ffff800015d4bc20

    <registers omitted for brevity>

    Call trace:
     submit_compressed_extents+0x38/0x3d0
     async_cow_submit+0x50/0xd0
     run_ordered_work+0xc8/0x280
     btrfs_work_helper+0x98/0x250
     process_one_work+0x1f0/0x4ac
     worker_thread+0x188/0x504
     kthread+0x110/0x114
     ret_from_fork+0x10/0x18

Fix this by adding respective barrier calls which ensure that all
accesses preceding setting of WORK_DONE_BIT are strictly ordered before
setting the flag. At the same time add a read barrier after reading of
WORK_DONE_BIT in run_ordered_work which ensures all subsequent loads
would be strictly ordered after reading the bit. This in turn ensures
are all accesses before WORK_DONE_BIT are going to be strictly ordered
before any access that can occur in ordered_func.

Reported-by: Chris Murphy <lists@colorremedies.com>
Fixes: 08a9ff326418 ("btrfs: Added btrfs_workqueue_struct implemented ordered execution based on kernel workqueue")
CC: stable@vger.kernel.org # 4.4+
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2011928
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Chris Murphy <chris@colorremedies.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: socfpga: add runtime suspend/resume callback for stratix10 platform

commit 9119570039481d56350af1c636f040fb300b8cf3 upstream.

According to upstream commit 5ec55823438e("net: stmmac:
add clocks management for gmac driver"), it improve clocks
management for stmmac driver. So, it is necessary to implement
the runtime callback in dwmac-socfpga driver because it doesn't
use the common stmmac_pltfr_pm_ops instance. Otherwise, clocks
are not disabled when system enters suspend status.

Fixes: 5ec55823438e ("net: stmmac: add clocks management for gmac driver")
Cc: stable@vger.kernel.org
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udf: Fix crash after seekdir

commit a48fc69fe6588b48d878d69de223b91a386a7cb4 upstream.

udf_readdir() didn't validate the directory position it should start
reading from. Thus when user uses lseek(2) on directory file descriptor
it can trick udf_readdir() into reading from a position in the middle of
directory entry which then upsets directory parsing code resulting in
errors or even possible kernel crashes. Similarly when the directory is
modified between two readdir calls, the directory position need not be
valid anymore.

Add code to validate current offset in the directory. This is actually
rather expensive for UDF as we need to read from the beginning of the
directory and parse all directory entries. This is because in UDF a
directory is just a stream of data containing directory entries and
since file names are fully under user's control we cannot depend on
detecting magic numbers and checksums in the header of directory entry
as a malicious attacker could fake them. We skip this step if we detect
that nothing changed since the last readdir call.

Reported-by: Nathan Wilson <nate@chickenbrittle.com>
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: don't use vcpu->arch.efer when checking host state on nested state load

commit af957eebfcc17433ee83ab85b1195a933ab5049c upstream.

When loading nested state, don't use check vcpu->arch.efer to get the
L1 host's 64-bit vs. 32-bit state and don't check it for consistency
with respect to VM_EXIT_HOST_ADDR_SPACE_SIZE, as register state in vCPU
may be stale when KVM_SET_NESTED_STATE is called---and architecturally
does not exist.  When restoring L2 state in KVM, the CPU is placed in
non-root where nested VMX code has no snapshot of L1 host state: VMX
(conditionally) loads host state fields loaded on VM-exit, but they need
not correspond to the state before entry.  A simple case occurs in KVM
itself, where the host RIP field points to vmx_vmexit rather than the
instruction following vmlaunch/vmresume.

However, for the particular case of L1 being in 32- or 64-bit mode
on entry, the exit controls can be treated instead as the source of
truth regarding the state of L1 on entry, and can be used to check
that vmcs12.VM_EXIT_HOST_ADDR_SPACE_SIZE matches vmcs12.HOST_EFER if
vmcs12.VM_EXIT_LOAD_IA32_EFER is set.  The consistency check on CPU
EFER vs. vmcs12.VM_EXIT_HOST_ADDR_SPACE_SIZE, instead, happens only
on VM-Enter.  That's because, again, there's conceptually no "current"
L1 EFER to check on KVM_SET_NESTED_STATE.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211115131837.195527-2-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: Check ADMIN before NICE for IOPRIO_CLASS_RT

commit 94c4b4fd25e6c3763941bdec3ad54f2204afa992 upstream.

Booting to Android userspace on 5.14 or newer triggers the following
SELinux denial:

avc: denied { sys_nice } for comm="init" capability=23
     scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability
     permissive=0

Init is PID 0 running as root, so it already has CAP_SYS_ADMIN. For
better compatibility with older SEPolicy, check ADMIN before NICE.

Fixes: 9d3a39a5f1e4 ("block: grant IOPRIO_CLASS_RT to CAP_SYS_NICE")
Signed-off-by: Alistair Delva <adelva@google.com>
Cc: Khazhismel Kumykov <khazhy@google.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: selinux@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Cc: kernel-team@android.com
Cc: stable@vger.kernel.org # v5.14+
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Serge Hallyn <serge@hallyn.com>
Link: https://lore.kernel.org/r/20211115181655.3608659-1-adelva@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/kexec: fix memory leak of ipl report buffer

commit 4aa9340584e37debef06fa99b56d064beb723891 upstream.

unreferenced object 0x38000195000 (size 4096):
  comm "kexec", pid 8548, jiffies 4294953647 (age 32443.270s)
  hex dump (first 32 bytes):
    00 00 00 c8 20 00 00 00 00 00 00 c0 02 80 00 00  .... ...........
    40 40 40 40 40 40 40 40 00 00 00 00 00 00 00 00  @@@@@@@@........
  backtrace:
    [<0000000011a2f199>] __vmalloc_node_range+0xc0/0x140
    [<0000000081fa2752>] vzalloc+0x5a/0x70
    [<0000000063a4c92d>] ipl_report_finish+0x2c/0x180
    [<00000000553304da>] kexec_file_add_ipl_report+0xf4/0x150
    [<00000000862d033f>] kexec_file_add_components+0x124/0x160
    [<000000000d2717bb>] arch_kexec_kernel_image_load+0x62/0x90
    [<000000002e0373b6>] kimage_file_alloc_init+0x1aa/0x2e0
    [<0000000060f2d14f>] __do_sys_kexec_file_load+0x17c/0x2c0
    [<000000008c86fe5a>] __s390x_sys_kexec_file_load+0x40/0x50
    [<000000001fdb9dac>] __do_syscall+0x1bc/0x1f0
    [<000000003ee4258d>] system_call+0x78/0xa0

Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Fixes: 99feaa717e55 ("s390/kexec_file: Create ipl report and pass to next kernel")
Cc: <stable@vger.kernel.org> # v5.2: 20c76e242e70: s390/kexec: fix return code handling
Cc: <stable@vger.kernel.org> # v5.2
Link: https://lore.kernel.org/r/20211116033101.GD21646@MiWiFi-R3L-srv
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix mailbox direction flags in qla2xxx_get_adapter_id()

commit 392006871bb26166bcfafa56faf49431c2cfaaa8 upstream.

The SCM changes set the flags in mcp->out_mb instead of mcp->in_mb so the
data was not actually being read into the mcp->mb[] array from the adapter.

Link: https://lore.kernel.org/r/20211108183012.13895-1-emilne@redhat.com
Fixes: 9f2475fe7406 ("scsi: qla2xxx: SAN congestion management implementation")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/8xx: Fix pinned TLBs with CONFIG_STRICT_KERNEL_RWX

commit 1e35eba4055149c578baf0318d2f2f89ea3c44a0 upstream.

As spotted and explained in commit c12ab8dbc492 ("powerpc/8xx: Fix
Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TEST"), the selection
of STRICT_KERNEL_RWX without selecting DEBUG_RODATA_TEST has spotted
the lack of the DIRTY bit in the pinned kernel data TLBs.

This problem should have been detected a lot earlier if things had
been working as expected. But due to an incredible level of chance or
mishap, this went undetected because of a set of bugs: In fact the
DTLBs were not pinned, because instead of setting the reserve bit
in MD_CTR, it was set in MI_CTR that is the register for ITLBs.

But then, another huge bug was there: the physical address was
reset to 0 at the boundary between RO and RW areas, leading to the
same physical space being mapped at both 0xc0000000 and 0xc8000000.
This had by miracle no consequence until now because the entry was
not really pinned so it was overwritten soon enough to go undetected.

Of course, now that we really pin the DTLBs, it must be fixed as well.

Fixes: f76c8f6d257c ("powerpc/8xx: Add function to set pinned TLBs")
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Depends-on: c12ab8dbc492 ("powerpc/8xx: Fix Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TEST")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a21e9a057fe2d247a535aff0d157a54eefee017a.1636963688.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/hyperv: Fix NULL deref in set_hv_tscchange_cb() if Hyper-V setup fails

commit daf972118c517b91f74ff1731417feb4270625a4 upstream.

Check for a valid hv_vp_index array prior to derefencing hv_vp_index when
setting Hyper-V's TSC change callback.  If Hyper-V setup failed in
hyperv_init(), the kernel will still report that it's running under
Hyper-V, but will have silently disabled nearly all functionality.

  BUG: kernel NULL pointer dereference, address: 0000000000000010
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP
  CPU: 4 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc2+ #75
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  RIP: 0010:set_hv_tscchange_cb+0x15/0xa0
  Code: <8b> 04 82 8b 15 12 17 85 01 48 c1 e0 20 48 0d ee 00 01 00 f6 c6 08
  ...
  Call Trace:
   kvm_arch_init+0x17c/0x280
   kvm_init+0x31/0x330
   vmx_init+0xba/0x13a
   do_one_initcall+0x41/0x1c0
   kernel_init_freeable+0x1f2/0x23b
   kernel_init+0x16/0x120
   ret_from_fork+0x22/0x30

Fixes: 93286261de1b ("x86/hyperv: Reenlightenment notifications support")
Cc: stable@vger.kernel.org
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20211104182239.1302956-2-seanjc@google.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: kmemleak: slob: respect SLAB_NOLEAKTRACE flag

commit 34dbc3aaf5d9e89ba6cc5e24add9458c21ab1950 upstream.

When kmemleak is enabled for SLOB, system does not boot and does not
print anything to the console.  At the very early stage in the boot
process we hit infinite recursion from kmemleak_init() and eventually
kernel crashes.

kmemleak_init() specifies SLAB_NOLEAKTRACE for KMEM_CACHE(), but
kmem_cache_create_usercopy() removes it because CACHE_CREATE_MASK is not
valid for SLOB.

Let's fix CACHE_CREATE_MASK and make kmemleak work with SLOB

Link: https://lkml.kernel.org/r/20211115020850.3154366-1-rkovhaev@gmail.com
Fixes: d8843922fba4 ("slab: Ignore internal flags in cache creation")
Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Glauber Costa <glommer@parallels.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipc: WARN if trying to remove ipc object which is absent

commit 126e8bee943e9926238c891e2df5b5573aee76bc upstream.

Patch series "shm: shm_rmid_forced feature fixes".

Some time ago I met kernel crash after CRIU restore procedure,
fortunately, it was CRIU restore, so, I had dump files and could do
restore many times and crash reproduced easily.  After some
investigation I've constructed the minimal reproducer.  It was found
that it's use-after-free and it happens only if sysctl
kernel.shm_rmid_forced = 1.

The key of the problem is that the exit_shm() function not handles shp's
object destroy when task->sysvshm.shm_clist contains items from
different IPC namespaces.  In most cases this list will contain only
items from one IPC namespace.

How can this list contain object from different namespaces? The
exit_shm() function is designed to clean up this list always when
process leaves IPC namespace.  But we made a mistake a long time ago and
did not add a exit_shm() call into the setns() syscall procedures.

The first idea was just to add this call to setns() syscall but it
obviously changes semantics of setns() syscall and that's
userspace-visible change.  So, I gave up on this idea.

The first real attempt to address the issue was just to omit forced
destroy if we meet shp object not from current task IPC namespace [1].
But that was not the best idea because task->sysvshm.shm_clist was
protected by rwsem which belongs to current task IPC namespace.  It
means that list corruption may occur.

Second approach is just extend exit_shm() to properly handle shp's from
different IPC namespaces [2].  This is really non-trivial thing, I've
put a lot of effort into that but not believed that it's possible to
make it fully safe, clean and clear.

Thanks to the efforts of Manfred Spraul working an elegant solution was
designed.  Thanks a lot, Manfred!

Eric also suggested the way to address the issue in ("[RFC][PATCH] shm:
In shm_exit destroy all created and never attached segments") Eric's
idea was to maintain a list of shm_clists one per IPC namespace, use
lock-less lists.  But there is some extra memory consumption-related
concerns.

An alternative solution which was suggested by me was implemented in
("shm: reset shm_clist on setns but omit forced shm destroy").  The idea
is pretty simple, we add exit_shm() syscall to setns() but DO NOT
destroy shm segments even if sysctl kernel.shm_rmid_forced = 1, we just
clean up the task->sysvshm.shm_clist list.

This chages semantics of setns() syscall a little bit but in comparision
to the "naive" solution when we just add exit_shm() without any special
exclusions this looks like a safer option.

[1] https://lkml.org/lkml/2021/7/6/1108
[2] https://lkml.org/lkml/2021/7/14/736

This patch (of 2):

Let's produce a warning if we trying to remove non-existing IPC object
from IPC namespace kht/idr structures.

This allows us to catch possible bugs when the ipc_rmid() function was
called with inconsistent struct ipc_ids*, struct kern_ipc_perm*
arguments.

Link: https://lkml.kernel.org/r/20211027224348.611025-1-alexander.mikhalitsyn@virtuozzo.com
Link: https://lkml.kernel.org/r/20211027224348.611025-2-alexander.mikhalitsyn@virtuozzo.com
Co-developed-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: check for null after calling kmemdup

commit 3e6db079751afd527bf3db32314ae938dc571916 upstream.

kmemdup can return a null pointer so need to check for it, otherwise
the null key will be dereferenced later in tipc_crypto_key_xmit as
can be seen in the trace [1].

Cc: tipc-discussion@lists.sourceforge.net
Cc: stable@vger.kernel.org # 5.15, 5.14, 5.10
[1] https://syzkaller.appspot.com/bug?id=bca180abb29567b189efdbdb34cbf7ba851c2a58

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Link: https://lore.kernel.org/r/20211115160143.5099-1-tadeusz.struk@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hexagon: clean up timer-regs.h

commit 51f2ec593441d3d1ebc0d478fac3ea329c7c93ac upstream.

When building allmodconfig, there is a warning about TIMER_ENABLE being
redefined:

  drivers/clocksource/timer-oxnas-rps.c:39:9: error: 'TIMER_ENABLE' macro redefined [-Werror,-Wmacro-redefined]
  #define TIMER_ENABLE            BIT(7)
          ^
  arch/hexagon/include/asm/timer-regs.h:13:9: note: previous definition is here
  #define TIMER_ENABLE            0
           ^
  1 error generated.

The values in this header are only used in one file each, if they are
used at all.  Remove the header and sink all of the constants into their
respective files.

TCX0_CLK_RATE is only used in arch/hexagon/include/asm/timex.h

TIMER_ENABLE, RTOS_TIMER_INT, RTOS_TIMER_REGS_ADDR are only used in
arch/hexagon/kernel/time.c.

SLEEP_CLK_RATE and TIMER_CLR_ON_MATCH have both been unused since the
file's introduction in commit 71e4a47f32f4 ("Hexagon: Add time and timer
functions").

TIMER_ENABLE is redefined as BIT(0) so the shift is moved into the
definition, rather than its use.

Link: https://lkml.kernel.org/r/20211115174250.1994179-3-nathan@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Brian Cain <bcain@codeaurora.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hexagon: export raw I/O routines for modules

commit ffb92ce826fd801acb0f4e15b75e4ddf0d189bde upstream.

Patch series "Fixes for ARCH=hexagon allmodconfig", v2.

This series fixes some issues noticed with ARCH=hexagon allmodconfig.

This patch (of 3):

When building ARCH=hexagon allmodconfig, the following errors occur:

  ERROR: modpost: "__raw_readsl" [drivers/i3c/master/svc-i3c-master.ko] undefined!
  ERROR: modpost: "__raw_writesl" [drivers/i3c/master/dw-i3c-master.ko] undefined!
  ERROR: modpost: "__raw_readsl" [drivers/i3c/master/dw-i3c-master.ko] undefined!
  ERROR: modpost: "__raw_writesl" [drivers/i3c/master/i3c-master-cdns.ko] undefined!
  ERROR: modpost: "__raw_readsl" [drivers/i3c/master/i3c-master-cdns.ko] undefined!

Export these symbols so that modules can use them without any errors.

Link: https://lkml.kernel.org/r/20211115174250.1994179-1-nathan@kernel.org
Link: https://lkml.kernel.org/r/20211115174250.1994179-2-nathan@kernel.org
Fixes: 013bf24c3829 ("Hexagon: Provide basic implementation and/or stubs for I/O routines.")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Brian Cain <bcain@codeaurora.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tun: fix bonding active backup with arp monitoring

commit a31d27fbed5d518734cb60956303eb15089a7634 upstream.

As stated in the bonding doc, trans_start must be set manually for drivers
using NETIF_F_LLTX:
 Drivers that use NETIF_F_LLTX flag must also update
 netdev_queue->trans_start. If they do not, then the ARP monitor will
 immediately fail any slaves using that driver, and those slaves will stay
 down.

Link: https://www.kernel.org/doc/html/v5.15/networking/bonding.html#arp-monitor-operation
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: vdso32: suppress error message for 'make mrproper'

commit 14831fad73f5ac30ac61760487d95a538e6ab3cb upstream.

When running the following command without arm-linux-gnueabi-gcc in
one's $PATH, the following warning is observed:

$ ARCH=arm64 CROSS_COMPILE_COMPAT=arm-linux-gnueabi- make -j72 LLVM=1 mrproper
make[1]: arm-linux-gnueabi-gcc: No such file or directory

This is because KCONFIG is not run for mrproper, so CONFIG_CC_IS_CLANG
is not set, and we end up eagerly evaluating various variables that try
to invoke CC_COMPAT.

This is a similar problem to what was observed in
commit dc960bfeedb0 ("h8300: suppress error messages for 'make clean'")

Reported-by: Lucas Henneman <henneman@google.com>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211019223646.1146945-4-ndesaulniers@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: dwmac-rk: Fix ethernet on rk3399 based devices

commit aec3f415f7244b7747a7952596971adb0df2f568 upstream.

Commit 2d26f6e39afb ("net: stmmac: dwmac-rk: fix unbalanced pm_runtime_enable warnings")
while getting rid of a runtime PM warning ended up breaking ethernet
on rk3399 based devices. By dropping an extra reference to the device,
the commit ends up enabling suspend / resume of the ethernet device -
which appears to be broken.

While the issue with runtime pm is being investigated, partially
revert commit 2d26f6e39afb to restore the network on rk3399.

Fixes: 2d26f6e39afb ("net: stmmac: dwmac-rk: fix unbalanced pm_runtime_enable warnings")
Suggested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Punit Agrawal <punitagrawal@gmail.com>
Cc: Michael Riesch <michael.riesch@wolfvision.net>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210929135049.3426058-1-punitagrawal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/kexec: fix return code handling

[ Upstream commit 20c76e242e7025bd355619ba67beb243ba1a1e95 ]

kexec_file_add_ipl_report ignores that ipl_report_finish may fail and
can return an error pointer instead of a valid pointer.
Fix this and simplify by returning NULL in case of an error and let
the only caller handle this case.

Fixes: 99feaa717e55 ("s390/kexec_file: Create ipl report and pass to next kernel")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/intel/uncore: Fix IIO event constraints for Skylake Server

[ Upstream commit 3866ae319c846a612109c008f43cba80b8c15e86 ]

According to the latest uncore document, COMP_BUF_OCCUPANCY (0xd5) event
can be collected on 2-3 counters. Update uncore IIO event constraints for
Skylake Server.

Fixes: cd34cd97b7b4 ("perf/x86/intel/uncore: Add Skylake server uncore support")
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20211115090334.3789-3-alexander.antonov@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/intel/uncore: Fix filter_tid mask for CHA events on Skylake Server

[ Upstream commit e324234e0aa881b7841c7c713306403e12b069ff ]

According Uncore Reference Manual: any of the CHA events may be filtered
by Thread/Core-ID by using tid modifier in CHA Filter 0 Register.
Update skx_cha_hw_config() to follow Uncore Guide.

Fixes: cd34cd97b7b4 ("perf/x86/intel/uncore: Add Skylake server uncore support")
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20211115090334.3789-2-alexander.antonov@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: qcom: sdm845: Enable dual edge errata

[ Upstream commit 3a3a100473d2f6ebf9bdfe6efedd7e18de724388 ]

It has been observed that dual edge triggered wakeirq GPIOs on SDM845
doesn't trigger interrupts on the falling edge.

Enabling wakeirq_dual_edge_errata for SDM845 indicates that the PDC in
SDM845 suffers from the same problem described, and worked around, by
Doug in 'c3c0c2e18d94 ("pinctrl: qcom: Handle broken/missing PDC dual
edge IRQs on sc7180")', so enable the workaround for SDM845 as well.

The specific problem seen without this is that gpio-keys does not detect
the falling edge of the LID gpio on the Lenovo Yoga C630 and as such
consistently reports the LID as closed.

Fixes: e35a6ae0eb3a ("pinctrl/msm: Setup GPIO chip in hierarchy")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-By: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211102034115.1946036-1-bjorn.andersson@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: PPC: Book3S HV: Use GLOBAL_TOC for kvmppc_h_set_dabr/xdabr()

[ Upstream commit dae581864609d36fb58855fd59880b4941ce9d14 ]

kvmppc_h_set_dabr(), and kvmppc_h_set_xdabr() which jumps into
it, need to use _GLOBAL_TOC to setup the kernel TOC pointer, because
kvmppc_h_set_dabr() uses LOAD_REG_ADDR() to load dawr_force_enable.

When called from hcall_try_real_mode() we have the kernel TOC in r2,
established near the start of kvmppc_interrupt_hv(), so there is no
issue.

But they can also be called from kvmppc_pseries_do_hcall() which is
module code, so the access ends up happening with the kvm-hv module's
r2, which will not point at dawr_force_enable and could even cause a
fault.

With the current code layout and compilers we haven't observed a fault
in practice, the load hits somewhere in kvm-hv.ko and silently returns
some bogus value.

Note that we we expect p8/p9 guests to use the DAWR, but SLOF uses
h_set_dabr() to test if sc1 works correctly, see SLOF's
lib/libhvcall/brokensc1.c.

Fixes: c1fe190c0672 ("powerpc: Add force enable of DAWR on P9 option")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Link: https://lore.kernel.org/r/20210923151031.72408-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>

e100: fix device suspend/resume

[ Upstream commit 5d2ca2e12dfb2aff3388ca57b06f570fa6206ced ]

As reported in [1], e100 was no longer working for suspend/resume
cycles. The previous commit mentioned in the fixes appears to have
broken things and this attempts to practice best known methods for
device power management and keep wake-up working while allowing
suspend/resume to work. To do this, I reorder a little bit of code
and fix the resume path to make sure the device is enabled.

[1] https://bugzilla.kernel.org/show_bug.cgi?id=214933

Fixes: 69a74aef8a18 ("e100: use generic power management")
Cc: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Reported-by: Alexey Kuznetsov <axet@me.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Alexey Kuznetsov <axet@me.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFC: add NCI_UNREG flag to eliminate the race

[ Upstream commit 48b71a9e66c2eab60564b1b1c85f4928ed04e406 ]

There are two sites that calls queue_work() after the
destroy_workqueue() and lead to possible UAF.

The first site is nci_send_cmd(), which can happen after the
nci_close_device as below

nfcmrvl_nci_unregister_dev   |  nfc_genl_dev_up
  nci_close_device           |
    flush_workqueue          |
    del_timer_sync           |
  nci_unregister_device      |    nfc_get_device
    destroy_workqueue        |    nfc_dev_up
    nfc_unregister_device    |      nci_dev_up
      device_del             |        nci_open_device
                             |          __nci_request
                             |            nci_send_cmd
                             |              queue_work !!!

Another site is nci_cmd_timer, awaked by the nci_cmd_work from the
nci_send_cmd.

  ...                        |  ...
  nci_unregister_device      |  queue_work
    destroy_workqueue        |
    nfc_unregister_device    |  ...
      device_del             |  nci_cmd_work
                             |  mod_timer
                             |  ...
                             |  nci_cmd_timer
                             |    queue_work !!!

For the above two UAF, the root cause is that the nfc_dev_up can race
between the nci_unregister_device routine. Therefore, this patch
introduce NCI_UNREG flag to easily eliminate the possible race. In
addition, the mutex_lock in nci_close_device can act as a barrier.

Signed-off-by: Lin Ma <linma@zju.edu.cn>
Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation")
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211116152732.19238-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: nfc: nci: Change the NCI close sequence

[ Upstream commit f011539e723c737b74876ac47345e40270a3c384 ]

If there is a NCI command in work queue after closing the NCI device at
nci_unregister_device, The NCI command timer starts at flush_workqueue
function and then NCI command timeout handler would be called 5 second
after flushing the NCI command work queue and destroying the queue.
At that time, the timeout handler would try to use NCI command work queue
that is destroyed already. it will causes the problem. To avoid this
abnormal situation, change the sequence to prevent the NCI command timeout
handler from being called after destroying the NCI command work queue.

Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFC: reorder the logic in nfc_{un,}register_device

[ Upstream commit 3e3b5dfcd16a3e254aab61bd1e8c417dd4503102 ]

There is a potential UAF between the unregistration routine and the NFC
netlink operations.

The race that cause that UAF can be shown as below:

 (FREE)                      |  (USE)
nfcmrvl_nci_unregister_dev   |  nfc_genl_dev_up
  nci_close_device           |
  nci_unregister_device      |    nfc_get_device
    nfc_unregister_device    |    nfc_dev_up
      rfkill_destory         |
      device_del             |      rfkill_blocked
  ...                        |    ...

The root cause for this race is concluded below:
1. The rfkill_blocked (USE) in nfc_dev_up is supposed to be placed after
the device_is_registered check.
2. Since the netlink operations are possible just after the device_add
in nfc_register_device, the nfc_dev_up() can happen anywhere during the
rfkill creation process, which leads to data race.

This patch reorder these actions to permit
1. Once device_del is finished, the nfc_dev_up cannot dereference the
rfkill object.
2. The rfkill_register need to be placed after the device_add of nfc_dev
because the parent device need to be created first. So this patch keeps
the order but inject device_lock to prevent the data race.

Signed-off-by: Lin Ma <linma@zju.edu.cn>
Fixes: be055b2f89b5 ("NFC: RFKILL support")
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211116152652.19217-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFC: reorganize the functions in nci_request

[ Upstream commit 86cdf8e38792545161dbe3350a7eced558ba4d15 ]

There is a possible data race as shown below:

thread-A in nci_request()       | thread-B in nci_close_device()
                                | mutex_lock(&ndev->req_lock);
test_bit(NCI_UP, &ndev->flags); |
...                             | test_and_clear_bit(NCI_UP, &ndev->flags)
mutex_lock(&ndev->req_lock);    |
                                |

This race will allow __nci_request() to be awaked while the device is
getting removed.

Similar to commit e2cb6b891ad2 ("bluetooth: eliminate the potential race
condition when removing the HCI controller"). this patch alters the
function sequence in nci_request() to prevent the data races between the
nci_close_device().

Signed-off-by: Lin Ma <linma@zju.edu.cn>
Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation")
Link: https://lore.kernel.org/r/20211115145600.8320-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix display error code in dmesg

[ Upstream commit 5aff430d4e33a0b48a6b3d5beb06f79da23f9916 ]

Fix misleading display error in dmesg if tc filter return fail.
Only i40e status error code should be converted to string, not linux
error code. Otherwise, we return false information about the error.

Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix creation of first queue by omitting it if is not power of two

[ Upstream commit 2e6d218c1ec6fb9cd70693b78134cbc35ae0b5a9 ]

Reject TCs creation with proper message if the first queue
assignment is not equal to the power of two.
The first queue number was checked too late in the second queue
iteration, if second queue was configured at all. Now if first queue value
is not a power of two, then trying to create qdisc will be rejected.

Fixes: 8f88b3034db3 ("i40e: Add infrastructure for queue channel support")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix warning message and call stack during rmmod i40e driver

[ Upstream commit 3a3b311e3881172fc8e019b6508f04bc40c92d9d ]

Restore part of reset functionality used when reset is called
from the VF to reset itself. Without this fix warning message
is displayed when VF is being removed via sysfs.

Fix the crash of the VF during reset by ensuring
that the PF receives the reset message successfully.
Refactor code to use one function instead of two.

Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Karen Sornek <karen.sornek@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix ping is lost after configuring ADq on VF

[ Upstream commit 9e0a603cb7dce2a19d98116d42de84b6db26d716 ]

Properly reconfigure VF VSIs after VF request ADQ.
Created new function to update queue mapping and queue pairs per TC
with AQ update VSI. This sets proper RSS size on NIC.
VFs num_queue_pairs should not be changed during setup of queue maps.
Previously, VF main VSI in ADQ had configured too many queues and had
wrong RSS size, which lead to packets not being consumed and drops in
connectivity.

Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use")
Co-developed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix changing previously set num_queue_pairs for PFs

[ Upstream commit d2a69fefd75683004ffe87166de5635b3267ee07 ]

Currently, the i40e_vsi_setup_queue_map is basing the count of queues in
TCs on a VSI's alloc_queue_pairs member which is not changed throughout
any user's action (for example via ethtool's set_channels callback).

This implies that vsi->tc_config.tc_info[n].qcount value that is given
to the kernel via netdev_set_tc_queue() that notifies about the count of
queues per particular traffic class is constant even if user has changed
the total count of queues.

This in turn caused the kernel warning after setting the queue count to
the lower value than the initial one:

$ ethtool -l ens801f0
Channel parameters for ens801f0:
Pre-set maximums:
RX:             0
TX:             0
Other:          1
Combined:       64
Current hardware settings:
RX:             0
TX:             0
Other:          1
Combined:       64

$ ethtool -L ens801f0 combined 40

[dmesg]
Number of in use tx queues changed invalidating tc mappings. Priority
traffic classification disabled!

Reason was that vsi->alloc_queue_pairs stayed at 64 value which was used
to set the qcount on TC0 (by default only TC0 exists so all of the
existing queues are assigned to TC0). we update the offset/qcount via
netdev_set_tc_queue() back to the old value but then the
netif_set_real_num_tx_queues() is using the vsi->num_queue_pairs as a
value which got set to 40.

Fix it by using vsi->req_queue_pairs as a queue count that will be
distributed across TCs. Do it only for non-zero values, which implies
that user actually requested the new count of queues.

For VSIs other than main, stay with the vsi->alloc_queue_pairs as we
only allow manipulating the queue count on main VSI.

Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use")
Co-developed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Co-developed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix NULL ptr dereference on VSI filter sync

[ Upstream commit 37d9e304acd903a445df8208b8a13d707902dea6 ]

Remove the reason of null pointer dereference in sync VSI filters.
Added new I40E_VSI_RELEASING flag to signalize deleting and releasing
of VSI resources to sync this thread with sync filters subtask.
Without this patch it is possible to start update the VSI filter list
after VSI is removed, that's causing a kernel oops.

Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Reviewed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Reviewed-by: Witold Fijalkowski <witoldx.fijalkowski@intel.com>
Reviewed-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix correct max_pkt_size on VF RX queue

[ Upstream commit 6afbd7b3c53cb7417189f476e99d431daccb85b0 ]

Setting VLAN port increasing RX queue max_pkt_size
by 4 bytes to take VLAN tag into account.
Trigger the VF reset when setting port VLAN for
VF to renegotiate its capabilities and reinitialize.

Fixes: ba4e003d29c1 ("i40e: don't hold spinlock while resetting VF")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: virtio_net_hdr_to_skb: count transport header in UFO

[ Upstream commit cf9acc90c80ecbee00334aa85d92f4e74014bcff ]

virtio_net_hdr_to_skb does not set the skb's gso_size and gso_type
correctly for UFO packets received via virtio-net that are a little over
the GSO size. This can lead to problems elsewhere in the networking
stack, e.g. ovs_vport_send dropping over-sized packets if gso_size is
not set.

This is due to the comparison

  if (skb->len - p_off > gso_size)

not properly accounting for the transport layer header.

p_off includes the size of the transport layer header (thlen), so
skb->len - p_off is the size of the TCP/UDP payload.

gso_size is read from the virtio-net header. For UFO, fragmentation
happens at the IP level so does not need to include the UDP header.

Hence the calculation could be comparing a TCP/UDP payload length with
an IP payload length, causing legitimate virtio-net packets to have
lack gso_type/gso_size information.

Example: a UDP packet with payload size 1473 has IP payload size 1481.
If the guest used UFO, it is not fragmented and the virtio-net header's
flags indicate that it is a GSO frame (VIRTIO_NET_HDR_GSO_UDP), with
gso_size = 1480 for an MTU of 1500.  skb->len will be 1515 and p_off
will be 42, so skb->len - p_off = 1473.  Hence the comparison fails, and
shinfo->gso_size and gso_type are not set as they should be.

Instead, add the UDP header length before comparing to gso_size when
using UFO. In this way, it is the size of the IP payload that is
compared to gso_size.

Fixes: 6dd912f82680 ("net: check untrusted gso_size at kernel entry")
Signed-off-by: Jonathan Davies <jonathan.davies@nutanix.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dpaa2-eth: fix use-after-free in dpaa2_eth_remove

[ Upstream commit 9b5a333272a48c2f8b30add7a874e46e8b26129c ]

Access to netdev after free_netdev() will cause use-after-free bug.
Move debug log before free_netdev() call to avoid it.

Fixes: 7472dd9f6499 ("staging: fsl-dpaa2/eth: Move print message")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: act_mirred: drop dst for the direction from egress to ingress

[ Upstream commit f799ada6bf2397c351220088b9b0980125c77280 ]

Without dropping dst, the packets sent from local mirred/redirected
to ingress will may still use the old dst. ip_rcv() will drop it as
the old dst is for output and its .input is dst_discard.

This patch is to fix by also dropping dst for those packets that are
mirred or redirected from egress to ingress in act_mirred.

Note that we don't drop it for the direction change from ingress to
egress, as on which there might be a user case attaching a metadata
dst by act_tunnel_key that would be used later.

Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: core: sysfs: Fix hang when device state is set via sysfs

[ Upstream commit 4edd8cd4e86dd3047e5294bbefcc0a08f66a430f ]

This fixes a regression added with:

commit f0f82e2476f6 ("scsi: core: Fix capacity set to zero after
offlinining device")

The problem is that after iSCSI recovery, iscsid will call into the kernel
to set the dev's state to running, and with that patch we now call
scsi_rescan_device() with the state_mutex held. If the SCSI error handler
thread is just starting to test the device in scsi_send_eh_cmnd() then it's
going to try to grab the state_mutex.

We are then stuck, because when scsi_rescan_device() tries to send its I/O
scsi_queue_rq() calls -> scsi_host_queue_ready() -> scsi_host_in_recovery()
which will return true (the host state is still in recovery) and I/O will
just be requeued. scsi_send_eh_cmnd() will then never be able to grab the
state_mutex to finish error handling.

To prevent the deadlock move the rescan-related code to after we drop the
state_mutex.

This also adds a check for if we are already in the running state. This
prevents extra scans and helps the iscsid case where if the transport class
has already onlined the device during its recovery process then we don't
need userspace to do it again plus possibly block that daemon.

Link: https://lore.kernel.org/r/20211105221048.6541-3-michael.christie@oracle.com
Fixes: f0f82e2476f6 ("scsi: core: Fix capacity set to zero after offlinining device")
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: lijinlin <lijinlin3@huawei.com>
Cc: Wu Bo <wubo40@huawei.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: E-Switch, return error if encap isn't supported

[ Upstream commit c4c3176739dfa6efcc5b1d1de4b3fd2b51b048c7 ]

On regular ConnectX HCAs getting encap mode isn't supported when the
E-Switch is in NONE mode. Current code would return no error code when
trying to get encap mode in such case which is wrong.

Fix by returning error value to indicate failure to caller in such case.

Fixes: 8e0aa4bc959c ("net/mlx5: E-switch, Protect eswitch mode changes")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: E-Switch, Change mode lock from mutex to rw semaphore

[ Upstream commit c55479d0cb6a28029844d0e90730704a0fb5efd3 ]

E-Switch mode change routine will take the write lock to prevent any
consumer to access the E-Switch resources while E-Switch is going
through a mode change.

In the next patch
E-Switch consumers (e.g vport representors) will take read_lock prior to
accessing E-Switch resources to prevent E-Switch mode changing in the
middle of the operation.

Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Lag, update tracker when state change event received

[ Upstream commit ae396d85c01c7bdc9eeceecde1f493d03f793465 ]

Currently, In NETDEV_CHANGELOWERSTATE/NETDEV_CHANGEUPPERSTATE events
handling, tracking is not fully completed if the LAG device is not ready
at the time the events occur. But, we must keep track of the upper and
lower states after receiving the events because RoCE needs this info in
mlx5_lag_get_roce_netdev() - in order to return the corresponding port
that its running on. Returning the wrong (not most recent) port will lead
to gids table being incorrect.

For example: If during the attachment of a slave to the bond, the other
non-attached port performs pci_reload, then the LAG device is not ready,
but that should not result in dismissing attached slave tracker update
automatically (which is performed in mlx5_handle_changelowerstate()), Since
these events might not come later, which can lead to both bond ports
having tx_enabled=0 - which is not a valid state of LAG bond.

Fixes: 9b412cc35f00 ("net/mlx5e: Add LAG warning if bond slave is not lag master")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: nullify cq->dbg pointer in mlx5_debug_cq_remove()

[ Upstream commit 76ded29d3fcda4928da8849ffc446ea46871c1c2 ]

Prior to this patch in case mlx5_core_destroy_cq() failed it proceeds
to rest of destroy operations. mlx5_core_destroy_cq() could be called again
by user and cause additional call of mlx5_debug_cq_remove().
cq->dbg was not nullify in previous call and cause the crash.

Fix it by nullify cq->dbg pointer after removal.

Also proceed to destroy operations only if FW return 0
for MLX5_CMD_OP_DESTROY_CQ command.

general protection fault, probably for non-canonical address 0x2000300004058: 0000 [#1] SMP PTI
CPU: 5 PID: 1228 Comm: python Not tainted 5.15.0-rc5_for_upstream_min_debug_2021_10_14_11_06 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:lockref_get+0x1/0x60
Code: 5d e9 53 ff ff ff 48 8d 7f 70 e8 0a 2e 48 00 c7 85 d0 00 00 00 02
00 00 00 c6 45 70 00 fb 5d c3 c3 cc cc cc cc cc cc cc cc 53 <48> 8b 17
48 89 fb 85 d2 75 3d 48 89 d0 bf 64 00 00 00 48 89 c1 48
RSP: 0018:ffff888137dd7a38 EFLAGS: 00010206
RAX: 0000000000000000 RBX: ffff888107d5f458 RCX: 00000000fffffffe
RDX: 000000000002c2b0 RSI: ffffffff8155e2e0 RDI: 0002000300004058
RBP: ffff888137dd7a88 R08: 0002000300004058 R09: ffff8881144a9f88
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881141d4000
R13: ffff888137dd7c68 R14: ffff888137dd7d58 R15: ffff888137dd7cc0
FS:  00007f4644f2a4c0(0000) GS:ffff8887a2d40000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055b4500f4380 CR3: 0000000114f7a003 CR4: 0000000000170ea0
Call Trace:
  simple_recursive_removal+0x33/0x2e0
  ? debugfs_remove+0x60/0x60
  debugfs_remove+0x40/0x60
  mlx5_debug_cq_remove+0x32/0x70 [mlx5_core]
  mlx5_core_destroy_cq+0x41/0x1d0 [mlx5_core]
  devx_obj_cleanup+0x151/0x330 [mlx5_ib]
  ? __pollwait+0xd0/0xd0
  ? xas_load+0x5/0x70
  ? xa_load+0x62/0xa0
  destroy_hw_idr_uobject+0x20/0x80 [ib_uverbs]
  uverbs_destroy_uobject+0x3b/0x360 [ib_uverbs]
  uobj_destroy+0x54/0xa0 [ib_uverbs]
  ib_uverbs_cmd_verbs+0xaf2/0x1160 [ib_uverbs]
  ? uverbs_finalize_object+0xd0/0xd0 [ib_uverbs]
  ib_uverbs_ioctl+0xc4/0x1b0 [ib_uverbs]
  __x64_sys_ioctl+0x3e4/0x8e0

Fixes: 94b960b9deff ("net/mlx5e: Fix memory leak in mlx5_core_destroy_cq() error path")
Signed-off-by: Valentine Fatiev <valentinef@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: hp_accel: Fix an error handling path in 'lis3lv02d_probe()'

[ Upstream commit c961a7d2aa23ae19e0099fbcdf1040fb760eea83 ]

If 'led_classdev_register()' fails, some additional resources should be
released.

Add the missing 'i8042_remove_filter()' and 'lis3lv02d_remove_fs()' calls
that are already in the remove function but are missing here.

Fixes: a4c724d0723b ("platform: hp_accel: add a i8042 filter to remove HPQ6000 data from kb bus stream")
Fixes: 9e0c79782143 ("lis3lv02d: merge with leds hp disk")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/5a4f218f8f16d2e3a7906b7ca3654ffa946895f8.1636314074.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mips: lantiq: add support for clk_get_parent()

[ Upstream commit fc1aabb088860d6cf9dd03612b7a6f0de91ccac2 ]

Provide a simple implementation of clk_get_parent() in the
lantiq subarch so that callers of it will build without errors.

Fixes this build error:
ERROR: modpost: "clk_get_parent" [drivers/iio/adc/ingenic-adc.ko] undefined!

Fixes: 171bb2f19ed6 ("MIPS: Lantiq: Add initial support for Lantiq SoCs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: linux-mips@vger.kernel.org
Cc: John Crispin <john@phrozen.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio@vger.kernel.org
Cc: Russell King <linux@armlinux.org.uk>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mips: bcm63xx: add support for clk_get_parent()

[ Upstream commit e8f67482e5a4bc8d0b65d606d08cb60ee123b468 ]

BCM63XX selects HAVE_LEGACY_CLK but does not provide/support
clk_get_parent(), so add a simple implementation of that
function so that callers of it will build without errors.

Fixes these build errors:

mips-linux-ld: drivers/iio/adc/ingenic-adc.o: in function `jz4770_adc_init_clk_div':
ingenic-adc.c:(.text+0xe4): undefined reference to `clk_get_parent'
mips-linux-ld: drivers/iio/adc/ingenic-adc.o: in function `jz4725b_adc_init_clk_div':
ingenic-adc.c:(.text+0x1b8): undefined reference to `clk_get_parent'

Fixes: e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs." )
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Artur Rojek <contact@artur-rojek.eu>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: linux-mips@vger.kernel.org
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-iio@vger.kernel.org
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: generic/yamon-dt: fix uninitialized variable error

[ Upstream commit 255e51da15baed47531beefd02f222e4dc01f1c1 ]

In the case where fw_getenv returns an error when fetching values
for ememsizea and memsize then variable phys_memsize is not assigned
a variable and will be uninitialized on a zero check of phys_memsize.
Fix this by initializing phys_memsize to zero.

Cleans up cppcheck error:
arch/mips/generic/yamon-dt.c:100:7: error: Uninitialized variable: phys_memsize [uninitvar]

Fixes: f41d2430bbd6 ("MIPS: generic/yamon-dt: Support > 256MB of RAM")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: Fix for setting queues to 0

[ Upstream commit 9a6e9e483a9684a34573fd9f9e30ecfb047cb8cb ]

Now setting combine to 0 will be rejected with the
appropriate error code.
This has been implemented by adding a condition that checks
the value of combine equal to zero.
Without this patch, when the user requested it, no error was
returned and combine was set to the default value for VF.

Fixes: 5520deb15326 ("iavf: Enable support for up to 16 queues")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: Fix for the false positive ASQ/ARQ errors while issuing VF reset

[ Upstream commit 321421b57a12e933f92b228e0e6d0b2c6541f41d ]

While issuing VF Reset from the guest OS, the VF driver prints
logs about critical / Overflow error detection. This is not an
actual error since the VF_MBX_ARQLEN register is set to all FF's
for a short period of time and the VF would catch the bits set if
it was reading the register during that spike of time.
This patch introduces an additional check to ignore this condition
since the VF is in reset.

Fixes: 19b73d8efaa4 ("i40evf: Add additional check for reset")
Signed-off-by: Surabhi Boob <surabhi.boob@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: validate pointers

[ Upstream commit 131b0edc4028bb88bb472456b1ddba526cfb7036 ]

In some cases, the ethtool get_rxfh handler may be called with a null
key or indir parameter. So check these pointers, or you will have a very
bad day.

Fixes: 43a3d9ba34c9 ("i40evf: Allow PF driver to configure RSS")
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: prevent accidental free of filter structure

[ Upstream commit 4f0400803818f2642f066d3eacaf013f23554cc7 ]

In iavf_config_clsflower, the filter structure could be accidentally
released at the end, if iavf_parse_cls_flower or iavf_handle_tclass ever
return a non-zero but positive value.

In this case, the function continues through to the end, and will call
kfree() on the filter structure even though it has been added to the
linked list.

This can actually happen because iavf_parse_cls_flower will return
a positive IAVF_ERR_CONFIG value instead of the traditional negative
error codes.

Fix this by ensuring that the kfree() check and error checks are
similar. Use the more idiomatic "if (err)" to catch all non-zero error
codes.

Fixes: 0075fa0fadd0 ("i40evf: Add support to apply cloud filters")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: Fix failure to exit out from last all-multicast mode

[ Upstream commit 8905072a192fffe9389255489db250c73ecab008 ]

The driver could only quit allmulti when allmulti and promisc modes are
turn on at the same time. If promisc had been off there was no way to turn
off allmulti mode.
The patch corrects this behavior. Switching allmulti does not depends on
promisc state mode anymore

Fixes: f42a5c74da99 ("i40e: Add allmulti support for the VF")
Signed-off-by: Piotr Marczak <piotr.marczak@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: free q_vectors before queues in iavf_disable_vf

[ Upstream commit 89f22f129696ab53cfbc608e0a2184d0fea46ac1 ]

iavf_free_queues() clears adapter->num_active_queues, which
iavf_free_q_vectors() relies on, so swap the order of these two function
calls in iavf_disable_vf(). This resolves a panic encountered when the
interface is disabled and then later brought up again after PF
communication is restored.

Fixes: 65c7006f234c ("i40evf: assign num_active_queues inside i40evf_alloc_queues")
Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: check for null in iavf_fix_features

[ Upstream commit 8a4a126f4be88eb8b5f00a165ab58c35edf4ef76 ]

If the driver has lost contact with the PF then it enters a disabled state
and frees adapter->vf_res. However, ndo_fix_features can still be called on
the interface, so we need to check for this condition first. Since we have
no information on the features at this time simply leave them unmodified
and return.

Fixes: c4445aedfe09 ("i40evf: Fix VLAN features")
Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: Fix return of set the new channel count

[ Upstream commit 4e5e6b5d9d1334d3490326b6922a2daaf56a867f ]

Fixed return correct code from set the new channel count.
Implemented by check if reset is done in appropriate time.
This solution give a extra time to pf for reset vf in case
when user want set new channel count for all vfs.
Without this patch it is possible to return misleading output
code to user and vf reset not to be correctly performed by pf.

Fixes: 5520deb15326 ("iavf: Enable support for up to 16 queues")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: Make sure the link_id is unique

[ Upstream commit cf4f5530bb55ef7d5a91036b26676643b80b1616 ]

The link_id is supposed to be unique, but smcr_next_link_id() doesn't
skip the used link_id as expected. So the patch fixes this.

Fixes: 026c381fb477 ("net/smc: introduce link_idx for link group array")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sock: fix /proc/net/sockstat underflow in sk_clone_lock()

[ Upstream commit 938cca9e4109b30ee1d476904538225a825e54eb ]

sk_clone_lock() needs to call sock_inuse_add(1) before entering the
sk_free_unlock_clone() error path, for __sk_free() from sk_free() from
sk_free_unlock_clone() calls sock_inuse_add(-1).

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 648845ab7e200993 ("sock: Move the socket inuse to namespace.")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: reduce indentation level in sk_clone_lock()

[ Upstream commit bbc20b70424aeb3c84f833860f6340adda5141fc ]

Rework initial test to jump over init code
if memory allocation has failed.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210127152731.748663-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: only accept encrypted MSG_CRYPTO msgs

[ Upstream commit 271351d255b09e39c7f6437738cba595f9b235be ]

The MSG_CRYPTO msgs are always encrypted and sent to other nodes
for keys' deployment. But when receiving in peers, if those nodes
do not validate it and make sure it's encrypted, one could craft
a malicious MSG_CRYPTO msg to deploy its key with no need to know
other nodes' keys.

This patch is to do that by checking TIPC_SKB_CB(skb)->decrypted
and discard it if this packet never got decrypted.

Note that this is also a supplementary fix to CVE-2021-43267 that
can be triggered by an unencrypted malicious MSG_CRYPTO msg.

Fixes: 1ef6f7c9390f ("tipc: add automatic session key exchange")
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: reject indirect blk offload when hw-tc-offload is off

[ Upstream commit b0757491a118ae5727cf9f1c3a11544397d46596 ]

The driver does not check if hw-tc-offload is enabled for the device
before offloading a flow in the context of indirect block callback.
Fix this by checking NETIF_F_HW_TC in the features flag and rejecting
the offload request.  This will avoid unnecessary dmesg error logs when
hw-tc-offload is disabled, such as these:

bnxt_en 0000:19:00.1 eno2np1: dev(ifindex=294) not on same switch
bnxt_en 0000:19:00.1 eno2np1: Error: bnxt_tc_add_flow: cookie=0xffff8dace1c88000 error=-22
bnxt_en 0000:19:00.0 eno1np0: dev(ifindex=294) not on same switch
bnxt_en 0000:19:00.0 eno1np0: Error: bnxt_tc_add_flow: cookie=0xffff8dace1c88000 error=-22

Reported-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Fixes: 627c89d00fb9 ("bnxt_en: flow_offload: offload tunnel decap rules via indirect callbacks")
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>