wdenk [Mon, 10 Jan 2005 00:01:04 +0000 (00:01 +0000)]
Coding Style cleanup
wdenk [Sun, 9 Jan 2005 23:48:14 +0000 (23:48 +0000)]
* Patch by Daniel Poirot, 10 Oct 2004:
Add support for Wind River sbc405 board
* Patch by Rainer Brestan, 12 Oct 2004:
Make examples/Makefile more robust
wdenk [Sun, 9 Jan 2005 23:33:49 +0000 (23:33 +0000)]
* Patch by Sam Song, 11 October 2004:
- Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board
- Adjust CPU:BUS frequency ratio 1:1 when core frequency
less than 50MHz
* Patch by Sam Song, 10 Oct 2004:
Fix a parameter error in run_command() in main.c
wdenk [Sun, 9 Jan 2005 23:16:25 +0000 (23:16 +0000)]
* Patches by Richard Woodruff, 01 Oct 2004:
add support for the TI OMAP2420 processor and its H4 reference
board
* Patch by Christian Pellegrin, 24 Sep 2004:
Added support for NE2000 compatible (DP8390, DP83902) NICs.
wdenk [Sun, 9 Jan 2005 22:28:56 +0000 (22:28 +0000)]
* Patch by Leif Lindholm, 23 Sep 2004:
add support for the AMD db1550 board
* Patch by Travis Sawyer, 15 Sep 2004:
Add CONFIG_SERIAL_MULTI support for ppc4xx,
update README.serial_multi
wdenk [Sun, 9 Jan 2005 21:28:15 +0000 (21:28 +0000)]
Patches by David Snowdon, 07 Sep 2004:
- add u-boot.hex target in the top level Makefile
- add support for the UNSW/NICTA PLEB 2 board (pleb2)
- use -mtune=xscale and -march=armv5 options for PXA
wdenk [Sun, 9 Jan 2005 18:21:42 +0000 (18:21 +0000)]
Patch by Florian Schlote, 08 Sep 2004:
Add support for SenTec-COBRA5272-board (Coldfire).
wdenk [Sun, 9 Jan 2005 18:12:51 +0000 (18:12 +0000)]
* Patch by Gleb Natapov, 07 Sep 2004:
mpc824x: set PCI latency timer to a sane value
(is 0 after reset).
* Patch by Kurt Stremerch, 03 Sep 2004:
Add bitstream configuration option for fpga command (Xilinx only).
wdenk [Sun, 9 Jan 2005 17:19:34 +0000 (17:19 +0000)]
* Patch by Kurt Stremerch, 03 Sep 2004:
Add Xilinx Spartan2E family FPGA support
* Patch by Jeff Angielski, 02 Sep 2004:
Add Added support for H2 revision of the EP8260 board.
Fixed formatting for some of the EP8260 related source files.
wdenk [Sun, 9 Jan 2005 17:12:27 +0000 (17:12 +0000)]
* Patch by Jon Loeliger, 02 Sep 2004:
Reset monitor size back to 256 so environment can be written
to flash on MPC85xx ADS and CDS releases.
* Patch by Paolo Broggini, 02 Sep 2004:
Make BSS clearing on ARM systems more robust
* Patch by Yue Hu and Joe, 01 Sep 2004:
- add PCI support for ixp425;
- add EEPRO100 suppor tfor ixdp425 board.
* Fix problem with protected sector detection in driver/cfi_flash.c
wdenk [Sun, 2 Jan 2005 17:02:54 +0000 (17:02 +0000)]
Release U-Boot 1.1.2
wdenk [Fri, 31 Dec 2004 09:32:47 +0000 (09:32 +0000)]
* Code cleanup, mostly for GCC-3.3.x
* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
additional ethernet addresses.
* Cleanup drivers/i82365.c - avoid duplication of code
* Fix bogus "cannot span across banks" flash error message
* Add support for CompactFlash for the CPC45 Board.
wdenk [Mon, 20 Dec 2004 11:18:07 +0000 (11:18 +0000)]
Fix problems with CMC_PU2 flash driver.
wdenk [Sun, 19 Dec 2004 21:39:27 +0000 (21:39 +0000)]
* Fix problems with CMC_PU2 flash driver.
* Adjust INKA 4x0 default settings
wdenk [Sun, 19 Dec 2004 10:09:07 +0000 (10:09 +0000)]
Renamed UC100 => uc100
wdenk [Sun, 19 Dec 2004 09:58:11 +0000 (09:58 +0000)]
Cleanup: avoid trigraph warning in fs/ext2/ext2fs.c; rename UC100 -> uc100
wdenk [Sat, 18 Dec 2004 22:35:43 +0000 (22:35 +0000)]
Add support for UC100 board
stroese [Fri, 17 Dec 2004 09:13:49 +0000 (09:13 +0000)]
One more code cleanup.
wdenk [Thu, 16 Dec 2004 21:44:03 +0000 (21:44 +0000)]
Code cleanup.
stroese [Thu, 16 Dec 2004 19:10:22 +0000 (19:10 +0000)]
PCI405 board update
stroese [Thu, 16 Dec 2004 19:00:32 +0000 (19:00 +0000)]
AR405 board update
stroese [Thu, 16 Dec 2004 18:47:58 +0000 (18:47 +0000)]
Patch by Stefan Roese, 16 Dez 2004
stroese [Thu, 16 Dec 2004 18:46:55 +0000 (18:46 +0000)]
CONFIG_MX_CYCLIC description added
stroese [Thu, 16 Dec 2004 18:44:40 +0000 (18:44 +0000)]
some new esd boards added
stroese [Thu, 16 Dec 2004 18:43:13 +0000 (18:43 +0000)]
esd common update
stroese [Thu, 16 Dec 2004 18:41:27 +0000 (18:41 +0000)]
VOH405 board update
stroese [Thu, 16 Dec 2004 18:40:02 +0000 (18:40 +0000)]
PMC405 board update
stroese [Thu, 16 Dec 2004 18:39:03 +0000 (18:39 +0000)]
PLU405 board update
stroese [Thu, 16 Dec 2004 18:38:22 +0000 (18:38 +0000)]
PCI405 board update
stroese [Thu, 16 Dec 2004 18:37:41 +0000 (18:37 +0000)]
OCRTC board update
stroese [Thu, 16 Dec 2004 18:37:08 +0000 (18:37 +0000)]
HUB405 board update
stroese [Thu, 16 Dec 2004 18:36:28 +0000 (18:36 +0000)]
DU405 board update
stroese [Thu, 16 Dec 2004 18:35:58 +0000 (18:35 +0000)]
DP405 board update
stroese [Thu, 16 Dec 2004 18:35:14 +0000 (18:35 +0000)]
CPCIISER4 board update
stroese [Thu, 16 Dec 2004 18:34:28 +0000 (18:34 +0000)]
CPCI440 board update
stroese [Thu, 16 Dec 2004 18:33:45 +0000 (18:33 +0000)]
CANBT board update
stroese [Thu, 16 Dec 2004 18:33:12 +0000 (18:33 +0000)]
ASH405 board update
stroese [Thu, 16 Dec 2004 18:30:36 +0000 (18:30 +0000)]
AR405 board update
stroese [Thu, 16 Dec 2004 18:27:51 +0000 (18:27 +0000)]
ADCIOP board update
stroese [Thu, 16 Dec 2004 18:27:05 +0000 (18:27 +0000)]
CPCI405 board update
stroese [Thu, 16 Dec 2004 18:25:40 +0000 (18:25 +0000)]
WUH405 board support added
stroese [Thu, 16 Dec 2004 18:24:54 +0000 (18:24 +0000)]
VOM405 board support added
stroese [Thu, 16 Dec 2004 18:24:06 +0000 (18:24 +0000)]
TASREG board support added
stroese [Thu, 16 Dec 2004 18:23:14 +0000 (18:23 +0000)]
HH405 board support added
stroese [Thu, 16 Dec 2004 18:21:17 +0000 (18:21 +0000)]
CPCI750 board support added
stroese [Thu, 16 Dec 2004 18:20:14 +0000 (18:20 +0000)]
APC405 board support added
stroese [Thu, 16 Dec 2004 18:17:50 +0000 (18:17 +0000)]
G2000 board support added
stroese [Thu, 16 Dec 2004 18:15:52 +0000 (18:15 +0000)]
PMC405 board support added
stroese [Thu, 16 Dec 2004 18:13:53 +0000 (18:13 +0000)]
CPU speed calculation updated (fixed a rounding problem)
stroese [Thu, 16 Dec 2004 18:10:54 +0000 (18:10 +0000)]
CPCI750 board support added
stroese [Thu, 16 Dec 2004 18:09:49 +0000 (18:09 +0000)]
Coldfire MCF5249 support added
stroese [Thu, 16 Dec 2004 18:05:42 +0000 (18:05 +0000)]
esd config files updated
stroese [Thu, 16 Dec 2004 18:03:44 +0000 (18:03 +0000)]
new 405ep defines added
stroese [Thu, 16 Dec 2004 18:01:48 +0000 (18:01 +0000)]
new SST and EXCEL devices add
stroese [Thu, 16 Dec 2004 17:59:53 +0000 (17:59 +0000)]
- ext2fs support added
- Tundra universe support added
stroese [Thu, 16 Dec 2004 17:57:26 +0000 (17:57 +0000)]
"static" from "do_fat_read" removed
stroese [Thu, 16 Dec 2004 17:56:09 +0000 (17:56 +0000)]
Coldfire MCF5249 support added
stroese [Thu, 16 Dec 2004 17:55:22 +0000 (17:55 +0000)]
I2C added
stroese [Thu, 16 Dec 2004 17:53:17 +0000 (17:53 +0000)]
use same spacing for "NAND:" puts
stroese [Thu, 16 Dec 2004 17:49:38 +0000 (17:49 +0000)]
CPCI750 board support added
stroese [Thu, 16 Dec 2004 17:48:41 +0000 (17:48 +0000)]
added CONFIG_PCI_CONFIG_HOST_BRIDGE to enable host bridge configuration
stroese [Thu, 16 Dec 2004 17:45:46 +0000 (17:45 +0000)]
added ".i" same as ".jffs2s" for compatibility with older units (CFG_NAND_SKIP_BAD_DOT_I)
stroese [Thu, 16 Dec 2004 17:42:39 +0000 (17:42 +0000)]
memory commands "mdc" and "mwc" added for cyclic read/write
stroese [Thu, 16 Dec 2004 17:40:30 +0000 (17:40 +0000)]
remove "static" from "ide_dev_desc" to use it from external code
stroese [Thu, 16 Dec 2004 17:37:54 +0000 (17:37 +0000)]
code cleanup: use CFG_VXWORKS_MAC_PTR instead of multiple board defines
stroese [Thu, 16 Dec 2004 17:35:57 +0000 (17:35 +0000)]
- ext2fs support added
- Tundra universe support added
stroese [Thu, 16 Dec 2004 17:33:38 +0000 (17:33 +0000)]
Tundra universe support added
stroese [Thu, 16 Dec 2004 17:33:10 +0000 (17:33 +0000)]
ext2fs support added
stroese [Thu, 16 Dec 2004 17:26:24 +0000 (17:26 +0000)]
ext2fs support added
wdenk [Thu, 16 Dec 2004 15:52:40 +0000 (15:52 +0000)]
Add support for INKA4X0 board
wdenk [Tue, 14 Dec 2004 23:28:24 +0000 (23:28 +0000)]
Cleanup for CMC_PU2 board
wdenk [Mon, 13 Dec 2004 09:49:01 +0000 (09:49 +0000)]
Fix problem introduced by previous patch.
wdenk [Mon, 13 Dec 2004 00:18:44 +0000 (00:18 +0000)]
Patch by Steven Scholz, 12 Dec 2004:
Fix typo in AT91 memory setup.
wdenk [Sun, 12 Dec 2004 22:06:17 +0000 (22:06 +0000)]
Patch by Martin Krause, 27 Oct 2004:
- add support for "STK52xx" board (including PS/2 multiplexer)
- add hardware detection for TQM5200
wdenk [Fri, 10 Dec 2004 11:40:40 +0000 (11:40 +0000)]
* Clean up CMC PU2 flash driver
* Update MAINTAINERS file
* Fix bug in MPC823 LCD driver
wdenk [Wed, 24 Nov 2004 23:35:19 +0000 (23:35 +0000)]
* Fix udelay() on AT91RM9200 for delays < 1 ms.
* Enable long help on CMC PU2 board;
fix reset issue;
increase CPU speed from 179 to 207 MHz.
wdenk [Mon, 22 Nov 2004 22:20:07 +0000 (22:20 +0000)]
Fix smc91111 ethernet driver for Xaeniax board (need to handle
unaligned tail part specially).
wdenk [Sun, 21 Nov 2004 00:06:33 +0000 (00:06 +0000)]
* Update for AT91RM9200DK and CMC_PU2 boards:
- Enable booting directly from flash
- fix CMC_PU2 flash driver
* Fix mkimage usage message
wdenk [Wed, 17 Nov 2004 20:44:20 +0000 (20:44 +0000)]
Map SRAM on NC650 board
wdenk [Tue, 2 Nov 2004 13:00:33 +0000 (13:00 +0000)]
Work around for Ethernet problems on Xaeniax board
wdenk [Thu, 28 Oct 2004 00:09:35 +0000 (00:09 +0000)]
Patch by TsiChung Liew, 23 Sep 2004:
- add support for MPC8220 CPU
- Add support for Alaska and Yukon boards
wdenk [Sun, 24 Oct 2004 23:54:40 +0000 (23:54 +0000)]
* Fix configuration for ERIC board (needs more room)
* Adjust MIPS compiler options at run-time depending on tools version
("-march=4kc -mtune=4kc -Wa,-mips_allow_branch_to_undefined" for new,
"-mcpu=4kc" for old tools)
wdenk [Tue, 19 Oct 2004 22:17:51 +0000 (22:17 +0000)]
Add passing of the command line and memory size information to the
kernel on xaeniax board.
wdenk [Sun, 17 Oct 2004 21:12:06 +0000 (21:12 +0000)]
Code cleanup for GCC-3.3.x compilers
wdenk [Mon, 11 Oct 2004 23:10:30 +0000 (23:10 +0000)]
Cleanup
wdenk [Mon, 11 Oct 2004 23:03:10 +0000 (23:03 +0000)]
* Enable NAND flash support for NC650 board.
* Patch by Thomas Lange 07 Oct 2004:
Updated README for DBAu1x00 boards to match current status
wdenk [Mon, 11 Oct 2004 22:51:13 +0000 (22:51 +0000)]
* Patch by Philippe Robin, 28 Sept 2004:
Fix Flash support for Versatile.
* Patch by Roger Blofeld, 16 Sep 2004:
Fix timeout for DHCP command retry
wdenk [Mon, 11 Oct 2004 22:43:02 +0000 (22:43 +0000)]
* Patch by Pantelis Antoniou, 14 Sep 2004:
Fix early serial hang when CONFIG_SERIAL_MULTI is defined.
* Patch by Pantelis Antoniou, 14 Sep 2004:
Kick watchdog when bz-decompressing
wdenk [Mon, 11 Oct 2004 22:25:49 +0000 (22:25 +0000)]
Fix CFG_HZ problems on AT91RM9200 systems
[Remember: CFG_HZ should be 1000 on ALL systems!]
wdenk [Sun, 10 Oct 2004 23:27:33 +0000 (23:27 +0000)]
* Patch by Gridish Shlomi, 30 Aug 2004:
- Add support to revA version of PQ27 and PQ27E.
- Reverted MPC8260ADS baudrate back to original 115200
* Patch by Hojin, 17 Sep 2004:
Fix typo in cfi_flash.c
* Patch by Mark Jonas, 09 September 2004:
mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong
error message
* Patch by Mark Jonas, 31 August 2004:
Added option CFG_XLB_PIPELINING to enable XLB pipelining. This
improves FTP performance for MPC5200 systems. Enabled for IceCube
by default.
wdenk [Sun, 10 Oct 2004 22:44:24 +0000 (22:44 +0000)]
* Patch by Michael Bendzick, 30 Aug 2004:
- Improve platform.S code for omap1510inn that detects whether code
is running from SDRAM or not. Patch allows SDRAM to be configured
if code is running out of SRAM at 0x20000000.
* Patch by Frederick Klatt, 30 Aug 2004:
Add support for the Wind River SBC8540/SBC8560 boards
wdenk [Sun, 10 Oct 2004 22:16:06 +0000 (22:16 +0000)]
* Configure SX1 board to use drivers/cfi_flash.c
* Patches by Michael Bendzick, 30 Aug 2004:
- Configure omap1510inn board to use drivers/cfi_flash.c
- Make drivers/cfi_flash.c protect environment and redundant
environment.
* Patch by Steven Scholz, 23 Jun 2004:
- Add script (tools/img2brec.sh) to programm U-Boot into
(Synch)Flash using the Bootstrap Mode of the MC9328MX1/L
wdenk [Sun, 10 Oct 2004 21:27:30 +0000 (21:27 +0000)]
Patches by Scott McNutt, 24 Aug 2004:
- Add support for Altera Nios-II processors.
- Add support for Psyent PCI-5441 board.
- Add support for Psyent PK1C20 board.
wdenk [Sun, 10 Oct 2004 21:21:55 +0000 (21:21 +0000)]
Patches by Jon Loeliger, 24 Aug 2004:
- Add support for the MPC8541 and MPC8555 CDS boards
- Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
wdenk [Sun, 10 Oct 2004 20:23:57 +0000 (20:23 +0000)]
* Patch by Jon Loeliger, 24 Aug 2004:
- Fix PCI window on MPC85xx; remove unneeded PCI initialization
from board_early_init_f()
- Provide SW workaround for PCI initialization on 85xx CDS
- Convert MPC85xxADS to use common CFI flash driver
* Cleanup: avoid compiler warnings
* Add CMC PU2 board to MAKEALL script
wdenk [Sun, 10 Oct 2004 18:49:14 +0000 (18:49 +0000)]
Patches by George G. Davis, 24 Aug 2004:
- Enable ramdisk/initrd tagged param support for omap1610h2_config
- Remove static network setup defaults from mx1ads_config
wdenk [Sun, 10 Oct 2004 18:41:04 +0000 (18:41 +0000)]
Patch by George G. Davis, 24 Aug 2004:
- update ARM boards to use constants from mach-types.h
wdenk [Sun, 10 Oct 2004 18:03:33 +0000 (18:03 +0000)]
Code Cleanup
Patch by Gary Jennejohn, 04 Oct 2004:
- fix I2C on at91rm9200
- add support for Ricoh RS5C372A RTC
wdenk [Sun, 10 Oct 2004 17:05:18 +0000 (17:05 +0000)]
* Patch by Gary Jennejohn, 01 Oct 2004:
- add support for CMC PU2 board
- add support for I2C on at91rm9200
* Patch by Gary Jennejohn, 28 Sep 2004:
fix baudrate handling on at91rm9200
wdenk [Sat, 9 Oct 2004 23:33:42 +0000 (23:33 +0000)]
Patch by Yuli Barcohen, 22 Aug 2004:
- remove ZPC.1900 board-specific flash driver;
switch the port to generic CFI driver;
- port clean-up
projects / kernel / u-boot.git / log