XArray: Fix xas_pause at ULONG_MAX

[ Upstream commit 82a22311b7a68a78709699dc8c098953b70e4fd2 ]

If we were unlucky enough to call xas_pause() when the index was at
ULONG_MAX (or a multi-slot entry which ends at ULONG_MAX), we would
wrap the index back around to 0 and restart the iteration from the
beginning.  Use the XAS_BOUNDS state to indicate that we should just
stop the iteration.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: delete temporary files

[ Upstream commit 95f4d9cced96afa9c69b3da8e79e96102c84fc60 ]

Temporary files used in the VDSO build process linger on even after make
mrproper: vdso-dummy.o.tmp, vdso.so.dbg.tmp.

Delete them once they're no longer needed.

Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/intel/uncore: Remove PCIe3 unit for SNR

[ Upstream commit 2167f1625c2f04a33145f325db0de285630f7bd1 ]

The PCIe Root Port driver for CPU Complex PCIe Root Ports are not
loaded on SNR.

The device ID for SNR PCIe3 unit is used by both uncore driver and the
PCIe Root Port driver. If uncore driver is loaded, the PCIe Root Port
driver never be probed.

Remove the PCIe3 unit for SNR for now. The support for PCIe3 unit will
be added later separately.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200116200210.18937-2-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/intel/uncore: Add PCI ID of IMC for Xeon E3 V5 Family

[ Upstream commit e74383045119fb8055cf31cb39e0fe951d67163a ]

The IMC uncore support is missed for E3-1585 v5 CPU.

Intel Xeon E3 V5 Family has Sky Lake CPU.
Add the PCI ID of IMC for Intel Xeon E3 V5 Family.

Reported-by: Rosales-fernandez, Carlos <carlos.rosales-fernandez@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Rosales-fernandez, Carlos <carlos.rosales-fernandez@intel.com>
Link: https://lkml.kernel.org/r/1578687311-158748-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wireless: wext: avoid gcc -O3 warning

[ Upstream commit e16119655c9e6c4aa5767cd971baa9c491f41b13 ]

After the introduction of CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3,
the wext code produces a bogus warning:

In function 'iw_handler_get_iwstats',
    inlined from 'ioctl_standard_call' at net/wireless/wext-core.c:1015:9,
    inlined from 'wireless_process_ioctl' at net/wireless/wext-core.c:935:10,
    inlined from 'wext_ioctl_dispatch.part.8' at net/wireless/wext-core.c:986:8,
    inlined from 'wext_handle_ioctl':
net/wireless/wext-core.c:671:3: error: argument 1 null where non-null expected [-Werror=nonnull]
   memcpy(extra, stats, sizeof(struct iw_statistics));
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from arch/x86/include/asm/string.h:5,
net/wireless/wext-core.c: In function 'wext_handle_ioctl':
arch/x86/include/asm/string_64.h:14:14: note: in a call to function 'memcpy' declared here

The problem is that ioctl_standard_call() sometimes calls the handler
with a NULL argument that would cause a problem for iw_handler_get_iwstats.
However, iw_handler_get_iwstats never actually gets called that way.

Marking that function as noinline avoids the warning and leads
to slightly smaller object code as well.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200107200741.3588770-1-arnd@arndb.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: Fix TKIP replay protection immediately after key setup

[ Upstream commit 6f601265215a421f425ba3a4850a35861d024643 ]

TKIP replay protection was skipped for the very first frame received
after a new key is configured. While this is potentially needed to avoid
dropping a frame in some cases, this does leave a window for replay
attacks with group-addressed frames at the station side. Any earlier
frame sent by the AP using the same key would be accepted as a valid
frame and the internal RSC would then be updated to the TSC from that
frame. This would allow multiple previously transmitted group-addressed
frames to be replayed until the next valid new group-addressed frame
from the AP is received by the station.

Fix this by limiting the no-replay-protection exception to apply only
for the case where TSC=0, i.e., when this is for the very first frame
protected using the new key, and the local RSC had not been set to a
higher value when configuring the key (which may happen with GTK).

Signed-off-by: Jouni Malinen <j@w1.fi>
Link: https://lore.kernel.org/r/20200107153545.10934-1-j@w1.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cfg80211: Fix radar event during another phy CAC

[ Upstream commit 26ec17a1dc5ecdd8d91aba63ead6f8b5ad5dea0d ]

In case a radar event of CAC_FINISHED or RADAR_DETECTED
happens during another phy is during CAC we might need
to cancel that CAC.

If we got a radar in a channel that another phy is now
doing CAC on then the CAC should be canceled there.

If, for example, 2 phys doing CAC on the same channels,
or on comptable channels, once on of them will finish his
CAC the other might need to cancel his CAC, since it is no
longer relevant.

To fix that the commit adds an callback and implement it in
mac80211 to end CAC.
This commit also adds a call to said callback if after a radar
event we see the CAC is no longer relevant

Signed-off-by: Orr Mazor <Orr.Mazor@tandemg.com>
Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20191222145449.15792-1-Orr.Mazor@tandemg.com
[slightly reformat/reword commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wireless: fix enabling channel 12 for custom regulatory domain

[ Upstream commit c4b9d655e445a8be0bff624aedea190606b5ebbc ]

Commit e33e2241e272 ("Revert "cfg80211: Use 5MHz bandwidth by
default when checking usable channels"") fixed a broken
regulatory (leaving channel 12 open for AP where not permitted).
Apply a similar fix to custom regulatory domain processing.

Signed-off-by: Cathy Luo <xiaohua.luo@nxp.com>
Signed-off-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Link: https://lore.kernel.org/r/1576836859-8945-1-git-send-email-ganapathi.bhat@nxp.com
[reword commit message, fix coding style, add a comment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lkdtm/bugs: fix build error in lkdtm_UNSET_SMEP

[ Upstream commit 0e31e3573f0cd94d7b821117db854187ffc85765 ]

When building ARCH=um with CONFIG_UML_X86=y and CONFIG_64BIT=y we get
the build errors:

drivers/misc/lkdtm/bugs.c: In function ‘lkdtm_UNSET_SMEP’:
drivers/misc/lkdtm/bugs.c:288:8: error: implicit declaration of function ‘native_read_cr4’ [-Werror=implicit-function-declaration]
  cr4 = native_read_cr4();
        ^~~~~~~~~~~~~~~
drivers/misc/lkdtm/bugs.c:290:13: error: ‘X86_CR4_SMEP’ undeclared (first use in this function); did you mean ‘X86_FEATURE_SMEP’?
  if ((cr4 & X86_CR4_SMEP) != X86_CR4_SMEP) {
             ^~~~~~~~~~~~
             X86_FEATURE_SMEP
drivers/misc/lkdtm/bugs.c:290:13: note: each undeclared identifier is reported only once for each function it appears in
drivers/misc/lkdtm/bugs.c:297:2: error: implicit declaration of function ‘native_write_cr4’; did you mean ‘direct_write_cr4’? [-Werror=implicit-function-declaration]
  native_write_cr4(cr4);
  ^~~~~~~~~~~~~~~~
  direct_write_cr4

So specify that this block of code should only build when
CONFIG_X86_64=y *AND* CONFIG_UML is unset.

Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20191213003522.66450-1-brendanhiggins@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

parisc: Use proper printk format for resource_size_t

[ Upstream commit 4f80b70e1953cb846dbdd1ce72cb17333d4c8d11 ]

resource_size_t should be printed with its own size-independent format
to fix warnings when compiling on 64-bit platform (e.g. with
COMPILE_TEST):

    arch/parisc/kernel/drivers.c: In function 'print_parisc_device':
    arch/parisc/kernel/drivers.c:892:9: warning:
        format '%p' expects argument of type 'void *',
        but argument 4 has type 'resource_size_t {aka unsigned int}' [-Wformat=]

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qmi_wwan: Add support for Quectel RM500Q

[ Upstream commit a9ff44f0e61d074f29770413fef6a5452be7b83e ]

RM500Q is a 5G module from Quectel, supporting both standalone and
non-standalone modes. The normal Quectel quirks apply (DTR and dynamic
interface numbers).

Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: sti: fix possible sleep-in-atomic

[ Upstream commit ce780a47c3c01e1e179d0792df6b853a913928f1 ]

Change mutex and spinlock management to avoid sleep
in atomic issue.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20200113100400.30472-1-arnaud.pouliquen@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: hdac_hda: Fix error in driver removal after failed probe

[ Upstream commit 552b1a85da9f63856e7e341b81c16e0e078204f1 ]

In case system has multiple HDA codecs, and codec probe fails for
at least one but not all codecs, driver will end up cancelling
a non-initialized timer context upon driver removal.

Call trace of typical case:

[   60.593646] WARNING: CPU: 1 PID: 1147 at kernel/workqueue.c:3032
__flush_work+0x18b/0x1a0
[...]
[   60.593670]  __cancel_work_timer+0x11f/0x1a0
[   60.593673]  hdac_hda_dev_remove+0x25/0x30 [snd_soc_hdac_hda]
[   60.593674]  device_release_driver_internal+0xe0/0x1c0
[   60.593675]  bus_remove_device+0xd6/0x140
[   60.593677]  device_del+0x175/0x3e0
[   60.593679]  ? widget_tree_free.isra.7+0x90/0xb0 [snd_hda_core]
[   60.593680]  snd_hdac_device_unregister+0x34/0x50 [snd_hda_core]
[   60.593682]  snd_hdac_ext_bus_device_remove+0x2a/0x60 [snd_hda_ext_core]
[   60.593684]  hda_dsp_remove+0x26/0x100 [snd_sof_intel_hda_common]
[   60.593686]  snd_sof_device_remove+0x84/0xa0 [snd_sof]
[   60.593687]  sof_pci_remove+0x10/0x30 [snd_sof_pci]
[   60.593689]  pci_device_remove+0x36/0xb0

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110235751.3404-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Intel: fix HDA codec driver probe with multiple controllers

[ Upstream commit 2c63bea714780f8e1fc9cb7bc10deda26fada25b ]

In case system has multiple HDA controllers, it can happen that
same HDA codec driver is used for codecs of multiple controllers.
In this case, SOF may fail to probe the HDA driver and SOF
initialization fails.

SOF HDA code currently relies that a call to request_module() will
also run device matching logic to attach driver to the codec instance.
However if driver for another HDA controller was already loaded and it
already loaded the HDA codec driver, this breaks current logic in SOF.
In this case the request_module() SOF does becomes a no-op and HDA
Codec driver is not attached to the codec instance sitting on the HDA
bus SOF is controlling. Typical scenario would be a system with both
external and internal GPUs, with driver of the external GPU loaded
first.

Fix this by adding similar logic as is used in legacy HDA driver
where an explicit device_attach() call is done after request_module().

Also add logic to propagate errors reported by device_attach() back
to caller. This also works in the case where drivers are not built
as modules.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110235751.3404-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: intel_pmc_core: update Comet Lake platform driver

[ Upstream commit 515ff674bb9bf06186052e352c4587dab8defaf0 ]

Adding new CML CPU model ID into platform driver support list.

Signed-off-by: Harry Pan <harry.pan@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: GPD pocket fan: Allow somewhat lower/higher temperature limits

[ Upstream commit 1f27dbd8265dbb379926c8f6a4453fe7fe26d7a3 ]

Allow the user to configure the fan to turn on / speed-up at lower
thresholds then before (20 degrees Celcius as minimum instead of 40) and
likewise also allow the user to delay the fan speeding-up till the
temperature hits 90 degrees Celcius (was 70).

Cc: Jason Anderson <jasona.594@gmail.com>
Reported-by: Jason Anderson <jasona.594@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: remove current MAC address filter on VF reset

[ Upstream commit 9e05229190380f6b8f702da39aaeb97a0fc80dc3 ]

Currently MAC filters are not altered during a VF reset event. This may
lead to a stale filter when an administratively set MAC is forced by the
PF.

For an administratively set MAC the PF driver deletes the VFs filters,
overwrites the VFs MAC address and triggers a VF reset. However
the VF driver itself is not aware of the filter removal, which is what
the VF reset is for.
The VF reset queues all filters present in the VF driver to be re-added
to the PF filter list (including the filter for the now stale VF MAC
address) and triggers a VIRTCHNL_OP_GET_VF_RESOURCES event, which
provides the new MAC address to the VF.

When this happens i40e will complain and reject the stale MAC filter,
at least in the untrusted VF case.
i40e 0000:08:00.0: Setting MAC 3c:fa:fa:fa:fa:01 on VF 0
iavf 0000:08:02.0: Reset warning received from the PF
iavf 0000:08:02.0: Scheduling reset task
i40e 0000:08:00.0: Bring down and up the VF interface to make this change effective.
i40e 0000:08:00.0: VF attempting to override administratively set MAC address, bring down and up the VF interface to resume normal operation
i40e 0000:08:00.0: VF 0 failed opcode 10, retval: -1
iavf 0000:08:02.0: Failed to add MAC filter, error IAVF_ERR_NVM

To avoid re-adding the stale MAC filter it needs to be removed from the
VF driver's filter list before queuing the existing filters. Then during
the VIRTCHNL_OP_GET_VF_RESOURCES event the correct filter needs to be
added again, at which point the MAC address has been updated.

As a bonus this change makes bringing the VF down and up again
superfluous for the administratively set MAC case.

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igb: Fix SGMII SFP module discovery for 100FX/LX.

[ Upstream commit 5365ec1aeff5b9f2962a9c9b31d63f9dad7e0e2d ]

Changing the link mode should also be done for 100BaseFX SGMII modules,
otherwise they just don't work when the default link mode in CTRL_EXT
coming from the EEPROM is SERDES.

Additionally 100Base-LX SGMII SFP modules are also supported now, which
was not the case before.

Tested with an i210 using Flexoptix S.1303.2M.G 100FX and
S.1303.10.G 100LX SGMII SFP modules.

Signed-off-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbe: Fix calculation of queue with VFs and flow director on interface flap

[ Upstream commit 4fad78ad6422d9bca62135bbed8b6abc4cbb85b8 ]

This patch fixes the calculation of queue when we restore flow director
filters after resetting adapter. In ixgbe_fdir_filter_restore(), filter's
vf may be zero which makes the queue outside of the rx_ring array.

The calculation is changed to the same as ixgbe_add_ethtool_fdir_entry().

Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbevf: Remove limit of 10 entries for unicast filter list

[ Upstream commit aa604651d523b1493988d0bf6710339f3ee60272 ]

Currently, though the FDB entry is added to VF, it does not appear in
RAR filters. VF driver only allows to add 10 entries. Attempting to add
another causes an error. This patch removes limitation and allows use of
all free RAR entries for the FDB if needed.

Fixes: 46ec20ff7d ("ixgbevf: Add macvlan support in the set rx mode op")
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix virtchnl_queue_select bitmap validation

[ Upstream commit d9d6a9aed3f66f8ce5fa3ca6ca26007d75032296 ]

Currently in i40e_vc_disable_queues_msg() we are incorrectly
validating the virtchnl queue select bitmaps. The
virtchnl_queue_select rx_queues and tx_queue bitmap is being
compared against ICE_MAX_VF_QUEUES, but the problem is that
these bitmaps can have a value greater than I40E_MAX_VF_QUEUES.
Fix this by comparing the bitmaps against BIT(I40E_MAX_VF_QUEUES).

Also, add the function i40e_vc_validate_vqs_bitmaps() that checks to see
if both virtchnl_queue_select bitmaps are empty along with checking that
the bitmaps only have valid bits set. This function can then be used in
both the queue enable and disable flows.

Suggested-by: Arkady Gilinksky <arkady.gilinsky@harmonicinc.com>
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/zcrypt: move ap device reset from bus to driver code

[ Upstream commit 0c874cd04292c7ee22d70eefc341fa2648f41f46 ]

This patch moves the reset invocation of an ap device when
fresh detected from the ap bus to the probe() function of
the driver responsible for this device.

The virtualisation of ap devices makes it necessary to
remove unconditioned resets on fresh appearing apqn devices.
It may be that such a device is already enabled for guest
usage. So there may be a race condition between host ap bus
and guest ap bus doing the reset. This patch moves the
reset from the ap bus to the zcrypt drivers. So if there
is no zcrypt driver bound to an ap device - for example
the ap device is bound to the vfio device driver - the
ap device is untouched passed to the vfio device driver.

Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rt5640: Fix NULL dereference on module unload

[ Upstream commit 89b71b3f02d8ae5a08a1dd6f4a2098b7b868d498 ]

The rt5640->jack is NULL if jack is already disabled at the time of
driver's module unloading.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200106014707.11378-1-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: mmp2: Fix the order of timer mux parents

[ Upstream commit 8bea5ac0fbc5b2103f8779ddff216122e3c2e1ad ]

Determined empirically, no documentation is available.

The OLPC XO-1.75 laptop used parent 1, that one being VCTCXO/4 (65MHz), but
thought it's a VCTCXO/2 (130MHz). The mmp2 timer driver, not knowing
what is going on, ended up just dividing the rate as of
commit f36797ee4380 ("ARM: mmp/mmp2: dt: enable the clock")'

Link: https://lore.kernel.org/r/20191218190454.420358-3-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: mesh: restrict airtime metric to peered established plinks

[ Upstream commit 02a614499600af836137c3fbc4404cd96365fff2 ]

The following warning is triggered every time an unestablished mesh peer
gets dumped. Checks if a peer link is established before retrieving the
airtime link metric.

[ 9563.022567] WARNING: CPU: 0 PID: 6287 at net/mac80211/mesh_hwmp.c:345
               airtime_link_metric_get+0xa2/0xb0 [mac80211]
[ 9563.022697] Hardware name: PC Engines apu2/apu2, BIOS v4.10.0.3
[ 9563.022756] RIP: 0010:airtime_link_metric_get+0xa2/0xb0 [mac80211]
[ 9563.022838] Call Trace:
[ 9563.022897]  sta_set_sinfo+0x936/0xa10 [mac80211]
[ 9563.022964]  ieee80211_dump_station+0x6d/0x90 [mac80211]
[ 9563.023062]  nl80211_dump_station+0x154/0x2a0 [cfg80211]
[ 9563.023120]  netlink_dump+0x17b/0x370
[ 9563.023130]  netlink_recvmsg+0x2a4/0x480
[ 9563.023140]  ____sys_recvmsg+0xa6/0x160
[ 9563.023154]  ___sys_recvmsg+0x93/0xe0
[ 9563.023169]  __sys_recvmsg+0x7e/0xd0
[ 9563.023210]  do_syscall_64+0x4e/0x140
[ 9563.023217]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20191203180644.70653-1-markus.theil@tu-ilmenau.de
[rewrite commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: sunxi-ng: h6-r: Fix AR100/R_APB2 parent order

[ Upstream commit 0c545240aebc2ccb8f661dc54283a14d64659804 ]

According to the BSP source code, both the AR100 and R_APB2 clocks have
PLL_PERIPH0 as mux index 3, not 2 as it was on previous chips. The pre-
divider used for PLL_PERIPH0 should be changed to index 3 to match.

This was verified by running a rough benchmark on the AR100 with various
clock settings:

        | mux | pre-divider | iterations/second | clock source |
        |=====|=============|===================|==============|
        |   0 |           0 |  19033   (stable) |       osc24M |
        |   2 |           5 |  11466 (unstable) |  iosc/osc16M |
        |   2 |          17 |  11422 (unstable) |  iosc/osc16M |
        |   3 |           5 |  85338   (stable) |  pll-periph0 |
        |   3 |          17 |  27167   (stable) |  pll-periph0 |

The relative performance numbers all match up (with pll-periph0 running
at its default 600MHz).

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: sunxi-ng: sun8i-r: Fix divider on APB0 clock

[ Upstream commit 47d64fef1f3ffbdf960d3330b9865fc9f12fdf84 ]

According to the BSP source code, the APB0 clock on the H3 and H5 has a
normal M divider, not a power-of-two divider. This matches the hardware
in the A83T (as described in both the BSP source code and the manual).
Since the A83T and H3/A64 clocks are actually the same, we can merge the
definitions.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rseq: Unregister rseq for clone CLONE_VM

[ Upstream commit 463f550fb47bede3a5d7d5177f363a6c3b45d50b ]

It has been reported by Google that rseq is not behaving properly
with respect to clone when CLONE_VM is used without CLONE_THREAD.

It keeps the prior thread's rseq TLS registered when the TLS of the
thread has moved, so the kernel can corrupt the TLS of the parent.

The approach of clearing the per task-struct rseq registration
on clone with CLONE_THREAD flag is incomplete. It does not cover
the use-case of clone with CLONE_VM set, but without CLONE_THREAD.

Here is the rationale for unregistering rseq on clone with CLONE_VM
flag set:

1) CLONE_THREAD requires CLONE_SIGHAND, which requires CLONE_VM to be
   set. Therefore, just checking for CLONE_VM covers all CLONE_THREAD
   uses. There is no point in checking for both CLONE_THREAD and
   CLONE_VM,

2) There is the possibility of an unlikely scenario where CLONE_SETTLS
   is used without CLONE_VM. In order to be an issue, it would require
   that the rseq TLS is in a shared memory area.

   I do not plan on adding CLONE_SETTLS to the set of clone flags which
   unregister RSEQ, because it would require that we also unregister RSEQ
   on set_thread_area(2) and arch_prctl(2) ARCH_SET_FS for completeness.
   So rather than doing a partial solution, it appears better to let
   user-space explicitly perform rseq unregistration across clone if
   needed in scenarios where CLONE_VM is not set.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191211161713.4490-3-mathieu.desnoyers@efficios.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools lib traceevent: Fix memory leakage in filter_event

[ Upstream commit f84ae29a6169318f9c929720c49d96323d2bbab9 ]

It is necessary to call free_arg(arg) when add_filter_type() returns NULL
in filter_event().

Signed-off-by: Hewenliang <hewenliang4@huawei.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Feilong Lin <linfeilong@huawei.com>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Link: http://lore.kernel.org/lkml/20191209063549.59941-1-hewenliang4@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: ti: wkup_m3_ipc: Fix race condition with rproc_boot

[ Upstream commit 03729cfa0d543bc996bf959e762ec999afc8f3d2 ]

Any user of wkup_m3_ipc calls wkup_m3_ipc_get to get a handle and this
checks the value of the static variable m3_ipc_state to see if the
wkup_m3 is ready. Currently this is populated during probe before
rproc_boot has been called, meaning there is a window of time that
wkup_m3_ipc_get can return a valid handle but the wkup_m3 itself is not
ready, leading to invalid IPC calls to the wkup_m3 and system
instability.

To avoid this, move the population of the m3_ipc_state variable until
after rproc_boot has succeeded to guarantee a valid and usable handle
is always returned.

Reported-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: beagle-x15-common: Model 5V0 regulator

[ Upstream commit e17e7c498d4f734df93c300441e100818ed58168 ]

On am57xx-beagle-x15, 5V0 is connected to P16, P17, P18 and P19
connectors. On am57xx-evm, 5V0 regulator is used to get 3V6 regulator
which is connected to the COMQ port. Model 5V0 regulator here in order
for it to be used in am57xx-evm to model 3V6 regulator.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: am57xx-beagle-x15/am57xx-idk: Remove "gpios" for endpoint dt nodes

[ Upstream commit 81cc0877840f72210e809bbedd6346d686560fc1 ]

PERST# line in the PCIE connector is driven by the host mode and not
EP mode. The gpios property here is used for driving the PERST# line.
Remove gpios property from all endpoint device tree nodes.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: sun8i: a83t: Correct USB3503 GPIOs polarity

[ Upstream commit 1c226017d3ec93547b58082bdf778d9db7401c95 ]

Current USB3503 driver ignores GPIO polarity and always operates as if the
GPIO lines were flagged as ACTIVE_HIGH. Fix the polarity for the existing
USB3503 chip applications to match the chip specification and common
convention for naming the pins. The only pin, which has to be ACTIVE_LOW
is the reset pin. The remaining are ACTIVE_HIGH. This change allows later
to fix the USB3503 driver to properly use generic GPIO bindings and read
polarity from DT.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson-sm1-sei610: add gpio bluetooth interrupt

[ Upstream commit 30388cc075720aa0af4f2cb5933afa1f8f39d313 ]

add gpio irq to support interrupt trigger mode.

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: sunxi-ng: v3s: Fix incorrect number of hw_clks.

[ Upstream commit 4ff40d140e2a2060ef6051800a4a9eab07624f42 ]

The hws field of sun8i_v3s_hw_clks has only 74
members. However, the number specified by CLK_NUMBER
is 77 (= CLK_I2S0 + 1). This leads to runtime segmentation
fault that is not always reproducible.

This patch fixes the problem by specifying correct clock number.

Signed-off-by: Yunhao Tian <18373444@buaa.edu.cn>
[Maxime: Also remove the CLK_NUMBER definition]
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cgroup: Prevent double killing of css when enabling threaded cgroup

commit 3bc0bb36fa30e95ca829e9cf480e1ef7f7638333 upstream.

The test_cgcore_no_internal_process_constraint_on_threads selftest when
running with subsystem controlling noise triggers two warnings:

> [  597.443115] WARNING: CPU: 1 PID: 28167 at kernel/cgroup/cgroup.c:3131 cgroup_apply_control_enable+0xe0/0x3f0
> [  597.443413] WARNING: CPU: 1 PID: 28167 at kernel/cgroup/cgroup.c:3177 cgroup_apply_control_disable+0xa6/0x160

Both stem from a call to cgroup_type_write. The first warning was also
triggered by syzkaller.

When we're switching cgroup to threaded mode shortly after a subsystem
was disabled on it, we can see the respective subsystem css dying there.

The warning in cgroup_apply_control_enable is harmless in this case
since we're not adding new subsys anyway.
The warning in cgroup_apply_control_disable indicates an attempt to kill
css of recently disabled subsystem repeatedly.

The commit prevents these situations by making cgroup_type_write wait
for all dying csses to go away before re-applying subtree controls.
When at it, the locations of WARN_ON_ONCE calls are moved so that
warning is triggered only when we are about to misuse the dying css.

Reported-by: syzbot+5493b2a54d31d6aea629@syzkaller.appspotmail.com
Reported-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Fix race condition in hci_release_sock()

commit 11eb85ec42dc8c7a7ec519b90ccf2eeae9409de8 upstream.

Syzbot managed to trigger a use after free "KASAN: use-after-free Write
in hci_sock_bind".  I have reviewed the code manually and one possibly
cause I have found is that we are not holding lock_sock(sk) when we do
the hci_dev_put(hdev) in hci_sock_release().  My theory is that the bind
and the release are racing against each other which results in this use
after free.

Reported-by: syzbot+eba992608adf3d796bcc@syzkaller.appspotmail.com
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ttyprintk: fix a potential deadlock in interrupt context issue

commit 9a655c77ff8fc65699a3f98e237db563b37c439b upstream.

tpk_write()/tpk_close() could be interrupted when holding a mutex, then
in timer handler tpk_write() may be called again trying to acquire same
mutex, lead to deadlock.

Google syzbot reported this issue with CONFIG_DEBUG_ATOMIC_SLEEP
enabled:

BUG: sleeping function called from invalid context at
kernel/locking/mutex.c:938
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/1
1 lock held by swapper/1/0:
...
Call Trace:
  <IRQ>
  dump_stack+0x197/0x210
  ___might_sleep.cold+0x1fb/0x23e
  __might_sleep+0x95/0x190
  __mutex_lock+0xc5/0x13c0
  mutex_lock_nested+0x16/0x20
  tpk_write+0x5d/0x340
  resync_tnc+0x1b6/0x320
  call_timer_fn+0x1ac/0x780
  run_timer_softirq+0x6c3/0x1790
  __do_softirq+0x262/0x98c
  irq_exit+0x19b/0x1e0
  smp_apic_timer_interrupt+0x1a3/0x610
  apic_timer_interrupt+0xf/0x20
  </IRQ>

See link https://syzkaller.appspot.com/bug?extid=2eeef62ee31f9460ad65 for
more details.

Fix it by using spinlock in process context instead of mutex and having
interrupt disabled in critical section.

Reported-by: syzbot+2eeef62ee31f9460ad65@syzkaller.appspotmail.com
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200113034842.435-1-zhenzhong.duan@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tomoyo: Use atomic_t for statistics counter

commit a8772fad0172aeae339144598b809fd8d4823331 upstream.

syzbot is reporting that there is a race at tomoyo_stat_update() [1].
Although it is acceptable to fail to track exact number of times policy
was updated, convert to atomic_t because this is not a hot path.

[1] https://syzkaller.appspot.com/bug?id=a4d7b973972eeed410596e6604580e0133b0fc04

Reported-by: syzbot <syzbot+efea72d4a0a1d03596cd@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: dvb-usb/dvb-usb-urb.c: initialize actlen to 0

commit 569bc8d6a6a50acb5fcf07fb10b8d2d461fdbf93 upstream.

This fixes a syzbot failure since actlen could be uninitialized,
but it was still used.

Syzbot link:

https://syzkaller.appspot.com/bug?extid=6bf9606ee955b646c0e1

Reported-and-tested-by: syzbot+6bf9606ee955b646c0e1@syzkaller.appspotmail.com
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: gspca: zero usb_buf

commit de89d0864f66c2a1b75becfdd6bf3793c07ce870 upstream.

Allocate gspca_dev->usb_buf with kzalloc instead of kmalloc to
ensure it is property zeroed. This fixes various syzbot errors
about uninitialized data.

Syzbot links:

https://syzkaller.appspot.com/bug?extid=32310fc2aea76898d074
https://syzkaller.appspot.com/bug?extid=99706d6390be1ac542a2
https://syzkaller.appspot.com/bug?extid=64437af5c781a7f0e08e

Reported-and-tested-by: syzbot+32310fc2aea76898d074@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+99706d6390be1ac542a2@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+64437af5c781a7f0e08e@syzkaller.appspotmail.com
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: vp7045: do not read uninitialized values if usb transfer fails

commit 26cff637121d8bb866ebd6515c430ac890e6ec80 upstream.

It is not a fatal error if reading the mac address or the remote control
decoder state fails.

Reported-by: syzbot+ec869945d3dde5f33b43@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: af9005: uninitialized variable printked

commit 51d0c99b391f0cac61ad7b827c26f549ee55672c upstream.

If usb_bulk_msg() fails, actual_length can be uninitialized.

Reported-by: syzbot+9d42b7773d2fecd983ab@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: digitv: don't continue if remote control state can't be read

commit eecc70d22ae51225de1ef629c1159f7116476b2e upstream.

This results in an uninitialized variable read.

Reported-by: syzbot+6bf9606ee955b646c0e1@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

reiserfs: Fix memory leak of journal device string

commit 5474ca7da6f34fa95e82edc747d5faa19cbdfb5c upstream.

When a filesystem is mounted with jdev mount option, we store the
journal device name in an allocated string in superblock. However we
fail to ever free that string. Fix it.

Reported-by: syzbot+1c6756baf4b16b94d2a6@syzkaller.appspotmail.com
Fixes: c3aa077648e1 ("reiserfs: Properly display mount options in /proc/mounts")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/mempolicy.c: fix out of bounds write in mpol_parse_str()

commit c7a91bc7c2e17e0a9c8b9745a2cb118891218fd1 upstream.

What we are trying to do is change the '=' character to a NUL terminator
and then at the end of the function we restore it back to an '='.  The
problem is there are two error paths where we jump to the end of the
function before we have replaced the '=' with NUL.

We end up putting the '=' in the wrong place (possibly one element
before the start of the buffer).

Link: http://lkml.kernel.org/r/20200115055426.vdjwvry44nfug7yy@kili.mountain
Reported-by: syzbot+e64a13c5369a194d67df@syzkaller.appspotmail.com
Fixes: 095f1fc4ebf3 ("mempolicy: rework shmem mpol parsing and display")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Dmitry Vyukov <dvyukov@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: kbuild: remove compressed images on 'make ARCH=arm64 (dist)clean'

commit d7bbd6c1b01cb5dd13c245d4586a83145c1d5f52 upstream.

Since v4.3-rc1 commit 0723c05fb75e44 ("arm64: enable more compressed
Image formats"), it is possible to build Image.{bz2,lz4,lzma,lzo}
AArch64 images. However, the commit missed adding support for removing
those images on 'make ARCH=arm64 (dist)clean'.

Fix this by adding them to the target list.
Make sure to match the order of the recipes in the makefile.

Cc: stable@vger.kernel.org # v4.3+
Fixes: 0723c05fb75e44 ("arm64: enable more compressed Image formats")
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools lib: Fix builds when glibc contains strlcpy()

commit 6c4798d3f08b81c2c52936b10e0fa872590c96ae upstream.

Disable a couple of compilation warnings (which are treated as errors)
on strlcpy() definition and declaration, allowing users to compile perf
and kernel (objtool) when:

1. glibc have strlcpy() (such as in ALT Linux since 2004) objtool and
   perf build fails with this (in gcc):

  In file included from exec-cmd.c:3:
  tools/include/linux/string.h:20:15: error: redundant redeclaration of ‘strlcpy’ [-Werror=redundant-decls]
     20 | extern size_t strlcpy(char *dest, const char *src, size_t size);

2. clang ignores `-Wredundant-decls', but produces another warning when
   building perf:

    CC       util/string.o
  ../lib/string.c:99:8: error: attribute declaration must precede definition [-Werror,-Wignored-attributes]
  size_t __weak strlcpy(char *dest, const char *src, size_t size)
  ../../tools/include/linux/compiler.h:66:34: note: expanded from macro '__weak'
  # define __weak                 __attribute__((weak))
  /usr/include/bits/string_fortified.h:151:8: note: previous definition is here
  __NTH (strlcpy (char *__restrict __dest, const char *__restrict __src,

Committer notes:

The

 #pragma GCC diagnostic

directive was introduced in gcc 4.6, so check for that as well.

Fixes: ce99091 ("perf tools: Move strlcpy() from perf to tools/lib/string.c")
Fixes: 0215d59 ("tools lib: Reinstate strlcpy() header guard with __UCLIBC__")
Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=118481
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Dmitry Levin <ldv@altlinux.org>
Cc: Dmitry Levin <ldv@altlinux.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: kbuild test robot <lkp@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Cc: Vineet Gupta <vineet.gupta1@synopsys.com>
Link: http://lore.kernel.org/lkml/20191224172029.19690-1-vt@altlinux.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / devfreq: Add new name attribute for sysfs

commit 2fee1a7cc6b1ce6634bb0f025be2c94a58dfa34d upstream.

The commit 4585fbcb5331 ("PM / devfreq: Modify the device name as devfreq(X) for
sysfs") changed the node name to devfreq(x). After this commit, it is not
possible to get the device name through /sys/class/devfreq/devfreq(X)/*.

Add new name attribute in order to get device name.

Cc: stable@vger.kernel.org
Fixes: 4585fbcb5331 ("PM / devfreq: Modify the device name as devfreq(X) for sysfs")
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf c2c: Fix return type for histogram sorting comparision functions

commit c1c8013ec34d7163431d18367808ea40b2e305f8 upstream.

Commit 722ddfde366f ("perf tools: Fix time sorting") changed - correctly
so - hist_entry__sort to return int64. Unfortunately several of the
builtin-c2c.c comparison routines only happened to work due the cast
caused by the wrong return type.

This causes meaningless ordering of both the cacheline list, and the
cacheline details page. E.g a simple:

  perf c2c record -a sleep 3
  perf c2c report

will result in cacheline table like
  =================================================
             Shared Data Cache Line Table
  =================================================
  #
  #        ------- Cacheline ----------    Total     Tot  - LLC Load Hitm -  - Store Reference -  - Load Dram -     LLC  Total  - Core Load Hit -  - LLC Load Hit -
  # Index         Address  Node  PA cnt  records    Hitm  Total  Lcl    Rmt  Total  L1Hit  L1Miss     Lcl   Rmt  Ld Miss  Loads    FB    L1   L2     Llc      Rmt
  # .....  ..............  ....  ......  .......  ......  .....  .....  ...  ....   .....  ......  ......  ....  ......   .....  .....  ..... ...  ....     .......

        0  0x7f0d27ffba00   N/A       0       52   0.12%     13      6    7    12      12       0       0     7      14      40      4     16    0    0           0
        1  0x7f0d27ff61c0   N/A       0     6353  14.04%   1475    801  674   779     779       0       0   718    1392    5574   1299   1967    0  115           0
        2  0x7f0d26d3ec80   N/A       0       71   0.15%     16      4   12    13      13       0       0    12      24      58      1     20    0    9           0
        3  0x7f0d26d3ec00   N/A       0       98   0.22%     23     17    6    19      19       0       0     6      12      79      0     40    0   10           0

i.e. with the list not being ordered by Total Hitm.

Fixes: 722ddfde366f ("perf tools: Fix time sorting")
Signed-off-by: Andres Freund <andres@anarazel.de>
Tested-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org # v3.16+
Link: http://lore.kernel.org/lkml/20200109043030.233746-1-andres@anarazel.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gfs2: Another gfs2_find_jhead fix

commit eed0f953b90e86e765197a1dad06bb48aedc27fe upstream.

On filesystems with a block size smaller than the page size,
gfs2_find_jhead can split a page across two bios (for example, when
blocks are not allocated consecutively).  When that happens, the first
bio that completes will unlock the page in its bi_end_io handler even
though the page hasn't been read completely yet.  Fix that by using a
chained bio for the rest of the page.

While at it, clean up the sector calculation logic in
gfs2_log_alloc_bio.  In gfs2_find_jhead, simplify the disk block and
offset calculation logic and fix a variable name.

Fixes: f4686c26ecc3 ("gfs2: read journal in large chunks")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

e1000e: Revert "e1000e: Make watchdog use delayed work"

[ Upstream commit d5ad7a6a7f3c87b278d7e4973b65682be4e588dd ]

This reverts commit 59653e6497d16f7ac1d9db088f3959f57ee8c3db.

This is due to this commit causing driver crashes and connections to
reset unexpectedly.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

e1000e: Drop unnecessary __E1000_DOWN bit twiddling

[ Upstream commit daee5598e491d8d3979bd4ad6c447d89ce57b446 ]

Since we no longer check for __E1000_DOWN in e1000e_close we can drop the
spot where we were restoring the bit. This saves us a bit of unnecessary
complexity.

Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/resctrl: Fix use-after-free due to inaccurate refcount of rdtgroup

[ Upstream commit 074fadee59ee7a9d2b216e9854bd4efb5dad679f ]

There is a race condition in the following scenario which results in an
use-after-free issue when reading a monitoring file and deleting the
parent ctrl_mon group concurrently:

Thread 1 calls atomic_inc() to take refcount of rdtgrp and then calls
kernfs_break_active_protection() to drop the active reference of kernfs
node in rdtgroup_kn_lock_live().

In Thread 2, kernfs_remove() is a blocking routine. It waits on all sub
kernfs nodes to drop the active reference when removing all subtree
kernfs nodes recursively. Thread 2 could block on kernfs_remove() until
Thread 1 calls kernfs_break_active_protection(). Only after
kernfs_remove() completes the refcount of rdtgrp could be trusted.

Before Thread 1 calls atomic_inc() and kernfs_break_active_protection(),
Thread 2 could call kfree() when the refcount of rdtgrp (sentry) is 0
instead of 1 due to the race.

In Thread 1, in rdtgroup_kn_unlock(), referring to earlier rdtgrp memory
(rdtgrp->waitcount) which was already freed in Thread 2 results in
use-after-free issue.

Thread 1 (rdtgroup_mondata_show)  Thread 2 (rdtgroup_rmdir)
--------------------------------  -------------------------
rdtgroup_kn_lock_live
  /*
   * kn active protection until
   * kernfs_break_active_protection(kn)
   */
  rdtgrp = kernfs_to_rdtgroup(kn)
                                  rdtgroup_kn_lock_live
                                    atomic_inc(&rdtgrp->waitcount)
                                    mutex_lock
                                  rdtgroup_rmdir_ctrl
                                    free_all_child_rdtgrp
                                      /*
                                       * sentry->waitcount should be 1
                                       * but is 0 now due to the race.
                                       */
                                      kfree(sentry)*[1]
  /*
   * Only after kernfs_remove()
   * completes, the refcount of
   * rdtgrp could be trusted.
   */
  atomic_inc(&rdtgrp->waitcount)
  /* kn->active-- */
  kernfs_break_active_protection(kn)
                                    rdtgroup_ctrl_remove
                                      rdtgrp->flags = RDT_DELETED
                                      /*
                                       * Blocking routine, wait for
                                       * all sub kernfs nodes to drop
                                       * active reference in
                                       * kernfs_break_active_protection.
                                       */
                                      kernfs_remove(rdtgrp->kn)
                                  rdtgroup_kn_unlock
                                    mutex_unlock
                                    atomic_dec_and_test(
                                                &rdtgrp->waitcount)
                                    && (flags & RDT_DELETED)
                                      kernfs_unbreak_active_protection(kn)
                                      kfree(rdtgrp)
  mutex_lock
mon_event_read
rdtgroup_kn_unlock
  mutex_unlock
  /*
   * Use-after-free: refer to earlier rdtgrp
   * memory which was freed in [1].
   */
  atomic_dec_and_test(&rdtgrp->waitcount)
  && (flags & RDT_DELETED)
    /* kn->active++ */
    kernfs_unbreak_active_protection(kn)
    kfree(rdtgrp)

Fix it by moving free_all_child_rdtgrp() to after kernfs_remove() in
rdtgroup_rmdir_ctrl() to ensure it has the accurate refcount of rdtgrp.

Fixes: f3cbeacaa06e ("x86/intel_rdt/cqm: Add rmdir support")
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1578500886-21771-3-git-send-email-xiaochen.shen@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/resctrl: Fix use-after-free when deleting resource groups

[ Upstream commit b8511ccc75c033f6d54188ea4df7bf1e85778740 ]

A resource group (rdtgrp) contains a reference count (rdtgrp->waitcount)
that indicates how many waiters expect this rdtgrp to exist. Waiters
could be waiting on rdtgroup_mutex or some work sitting on a task's
workqueue for when the task returns from kernel mode or exits.

The deletion of a rdtgrp is intended to have two phases:

  (1) while holding rdtgroup_mutex the necessary cleanup is done and
  rdtgrp->flags is set to RDT_DELETED,

  (2) after releasing the rdtgroup_mutex, the rdtgrp structure is freed
  only if there are no waiters and its flag is set to RDT_DELETED. Upon
  gaining access to rdtgroup_mutex or rdtgrp, a waiter is required to check
  for the RDT_DELETED flag.

When unmounting the resctrl file system or deleting ctrl_mon groups,
all of the subdirectories are removed and the data structure of rdtgrp
is forcibly freed without checking rdtgrp->waitcount. If at this point
there was a waiter on rdtgrp then a use-after-free issue occurs when the
waiter starts running and accesses the rdtgrp structure it was waiting
on.

See kfree() calls in [1], [2] and [3] in these two call paths in
following scenarios:
(1) rdt_kill_sb() -> rmdir_all_sub() -> free_all_child_rdtgrp()
(2) rdtgroup_rmdir() -> rdtgroup_rmdir_ctrl() -> free_all_child_rdtgrp()

There are several scenarios that result in use-after-free issue in
following:

Scenario 1:
-----------
In Thread 1, rdtgroup_tasks_write() adds a task_work callback
move_myself(). If move_myself() is scheduled to execute after Thread 2
rdt_kill_sb() is finished, referring to earlier rdtgrp memory
(rdtgrp->waitcount) which was already freed in Thread 2 results in
use-after-free issue.

Thread 1 (rdtgroup_tasks_write)        Thread 2 (rdt_kill_sb)
-------------------------------        ----------------------
rdtgroup_kn_lock_live
  atomic_inc(&rdtgrp->waitcount)
  mutex_lock
rdtgroup_move_task
  __rdtgroup_move_task
    /*
     * Take an extra refcount, so rdtgrp cannot be freed
     * before the call back move_myself has been invoked
     */
    atomic_inc(&rdtgrp->waitcount)
    /* Callback move_myself will be scheduled for later */
    task_work_add(move_myself)
rdtgroup_kn_unlock
  mutex_unlock
  atomic_dec_and_test(&rdtgrp->waitcount)
  && (flags & RDT_DELETED)
                                       mutex_lock
                                       rmdir_all_sub
                                         /*
                                          * sentry and rdtgrp are freed
                                          * without checking refcount
                                          */
                                         free_all_child_rdtgrp
                                           kfree(sentry)*[1]
                                         kfree(rdtgrp)*[2]
                                       mutex_unlock
/*
 * Callback is scheduled to execute
 * after rdt_kill_sb is finished
 */
move_myself
  /*
   * Use-after-free: refer to earlier rdtgrp
   * memory which was freed in [1] or [2].
   */
  atomic_dec_and_test(&rdtgrp->waitcount)
  && (flags & RDT_DELETED)
    kfree(rdtgrp)

Scenario 2:
-----------
In Thread 1, rdtgroup_tasks_write() adds a task_work callback
move_myself(). If move_myself() is scheduled to execute after Thread 2
rdtgroup_rmdir() is finished, referring to earlier rdtgrp memory
(rdtgrp->waitcount) which was already freed in Thread 2 results in
use-after-free issue.

Thread 1 (rdtgroup_tasks_write)        Thread 2 (rdtgroup_rmdir)
-------------------------------        -------------------------
rdtgroup_kn_lock_live
  atomic_inc(&rdtgrp->waitcount)
  mutex_lock
rdtgroup_move_task
  __rdtgroup_move_task
    /*
     * Take an extra refcount, so rdtgrp cannot be freed
     * before the call back move_myself has been invoked
     */
    atomic_inc(&rdtgrp->waitcount)
    /* Callback move_myself will be scheduled for later */
    task_work_add(move_myself)
rdtgroup_kn_unlock
  mutex_unlock
  atomic_dec_and_test(&rdtgrp->waitcount)
  && (flags & RDT_DELETED)
                                       rdtgroup_kn_lock_live
                                         atomic_inc(&rdtgrp->waitcount)
                                         mutex_lock
                                       rdtgroup_rmdir_ctrl
                                         free_all_child_rdtgrp
                                           /*
                                            * sentry is freed without
                                            * checking refcount
                                            */
                                           kfree(sentry)*[3]
                                         rdtgroup_ctrl_remove
                                           rdtgrp->flags = RDT_DELETED
                                       rdtgroup_kn_unlock
                                         mutex_unlock
                                         atomic_dec_and_test(
                                                     &rdtgrp->waitcount)
                                         && (flags & RDT_DELETED)
                                           kfree(rdtgrp)
/*
 * Callback is scheduled to execute
 * after rdt_kill_sb is finished
 */
move_myself
  /*
   * Use-after-free: refer to earlier rdtgrp
   * memory which was freed in [3].
   */
  atomic_dec_and_test(&rdtgrp->waitcount)
  && (flags & RDT_DELETED)
    kfree(rdtgrp)

If CONFIG_DEBUG_SLAB=y, Slab corruption on kmalloc-2k can be observed
like following. Note that "0x6b" is POISON_FREE after kfree(). The
corrupted bits "0x6a", "0x64" at offset 0x424 correspond to
waitcount member of struct rdtgroup which was freed:

  Slab corruption (Not tainted): kmalloc-2k start=ffff9504c5b0d000, len=2048
  420: 6b 6b 6b 6b 6a 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkjkkkkkkkkkkk
  Single bit error detected. Probably bad RAM.
  Run memtest86+ or a similar memory test tool.
  Next obj: start=ffff9504c5b0d800, len=2048
  000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
  010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk

  Slab corruption (Not tainted): kmalloc-2k start=ffff9504c58ab800, len=2048
  420: 6b 6b 6b 6b 64 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkdkkkkkkkkkkk
  Prev obj: start=ffff9504c58ab000, len=2048
  000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
  010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk

Fix this by taking reference count (waitcount) of rdtgrp into account in
the two call paths that currently do not do so. Instead of always
freeing the resource group it will only be freed if there are no waiters
on it. If there are waiters, the resource group will have its flags set
to RDT_DELETED.

It will be left to the waiter to free the resource group when it starts
running and finding that it was the last waiter and the resource group
has been removed (rdtgrp->flags & RDT_DELETED) since. (1) rdt_kill_sb()
-> rmdir_all_sub() -> free_all_child_rdtgrp() (2) rdtgroup_rmdir() ->
rdtgroup_rmdir_ctrl() -> free_all_child_rdtgrp()

Fixes: f3cbeacaa06e ("x86/intel_rdt/cqm: Add rmdir support")
Fixes: 60cf5e101fd4 ("x86/intel_rdt: Add mkdir to resctrl file system")
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1578500886-21771-2-git-send-email-xiaochen.shen@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/resctrl: Fix a deadlock due to inaccurate reference

[ Upstream commit 334b0f4e9b1b4a1d475f803419d202f6c5e4d18e ]

There is a race condition which results in a deadlock when rmdir and
mkdir execute concurrently:

$ ls /sys/fs/resctrl/c1/mon_groups/m1/
cpus  cpus_list  mon_data  tasks

Thread 1: rmdir /sys/fs/resctrl/c1
Thread 2: mkdir /sys/fs/resctrl/c1/mon_groups/m1

3 locks held by mkdir/48649:
 #0:  (sb_writers#17){.+.+}, at: [<ffffffffb4ca2aa0>] mnt_want_write+0x20/0x50
 #1:  (&type->i_mutex_dir_key#8/1){+.+.}, at: [<ffffffffb4c8c13b>] filename_create+0x7b/0x170
 #2:  (rdtgroup_mutex){+.+.}, at: [<ffffffffb4a4389d>] rdtgroup_kn_lock_live+0x3d/0x70

4 locks held by rmdir/48652:
 #0:  (sb_writers#17){.+.+}, at: [<ffffffffb4ca2aa0>] mnt_want_write+0x20/0x50
 #1:  (&type->i_mutex_dir_key#8/1){+.+.}, at: [<ffffffffb4c8c3cf>] do_rmdir+0x13f/0x1e0
 #2:  (&type->i_mutex_dir_key#8){++++}, at: [<ffffffffb4c86d5d>] vfs_rmdir+0x4d/0x120
 #3:  (rdtgroup_mutex){+.+.}, at: [<ffffffffb4a4389d>] rdtgroup_kn_lock_live+0x3d/0x70

Thread 1 is deleting control group "c1". Holding rdtgroup_mutex,
kernfs_remove() removes all kernfs nodes under directory "c1"
recursively, then waits for sub kernfs node "mon_groups" to drop active
reference.

Thread 2 is trying to create a subdirectory "m1" in the "mon_groups"
directory. The wrapper kernfs_iop_mkdir() takes an active reference to
the "mon_groups" directory but the code drops the active reference to
the parent directory "c1" instead.

As a result, Thread 1 is blocked on waiting for active reference to drop
and never release rdtgroup_mutex, while Thread 2 is also blocked on
trying to get rdtgroup_mutex.

Thread 1 (rdtgroup_rmdir)   Thread 2 (rdtgroup_mkdir)
(rmdir /sys/fs/resctrl/c1)  (mkdir /sys/fs/resctrl/c1/mon_groups/m1)
-------------------------   -------------------------
                            kernfs_iop_mkdir
                              /*
                               * kn: "m1", parent_kn: "mon_groups",
                               * prgrp_kn: parent_kn->parent: "c1",
                               *
                               * "mon_groups", parent_kn->active++: 1
                               */
                              kernfs_get_active(parent_kn)
kernfs_iop_rmdir
  /* "c1", kn->active++ */
  kernfs_get_active(kn)

  rdtgroup_kn_lock_live
    atomic_inc(&rdtgrp->waitcount)
    /* "c1", kn->active-- */
    kernfs_break_active_protection(kn)
    mutex_lock

  rdtgroup_rmdir_ctrl
    free_all_child_rdtgrp
      sentry->flags = RDT_DELETED

    rdtgroup_ctrl_remove
      rdtgrp->flags = RDT_DELETED
      kernfs_get(kn)
      kernfs_remove(rdtgrp->kn)
        __kernfs_remove
          /* "mon_groups", sub_kn */
          atomic_add(KN_DEACTIVATED_BIAS, &sub_kn->active)
          kernfs_drain(sub_kn)
            /*
             * sub_kn->active == KN_DEACTIVATED_BIAS + 1,
             * waiting on sub_kn->active to drop, but it
             * never drops in Thread 2 which is blocked
             * on getting rdtgroup_mutex.
             */
Thread 1 hangs here ---->
            wait_event(sub_kn->active == KN_DEACTIVATED_BIAS)
            ...
                              rdtgroup_mkdir
                                rdtgroup_mkdir_mon(parent_kn, prgrp_kn)
                                  mkdir_rdt_prepare(parent_kn, prgrp_kn)
                                    rdtgroup_kn_lock_live(prgrp_kn)
                                      atomic_inc(&rdtgrp->waitcount)
                                      /*
                                       * "c1", prgrp_kn->active--
                                       *
                                       * The active reference on "c1" is
                                       * dropped, but not matching the
                                       * actual active reference taken
                                       * on "mon_groups", thus causing
                                       * Thread 1 to wait forever while
                                       * holding rdtgroup_mutex.
                                       */
                                      kernfs_break_active_protection(
                                                               prgrp_kn)
                                      /*
                                       * Trying to get rdtgroup_mutex
                                       * which is held by Thread 1.
                                       */
Thread 2 hangs here ---->             mutex_lock
                                      ...

The problem is that the creation of a subdirectory in the "mon_groups"
directory incorrectly releases the active protection of its parent
directory instead of itself before it starts waiting for rdtgroup_mutex.
This is triggered by the rdtgroup_mkdir() flow calling
rdtgroup_kn_lock_live()/rdtgroup_kn_unlock() with kernfs node of the
parent control group ("c1") as argument. It should be called with kernfs
node "mon_groups" instead. What is currently missing is that the
kn->priv of "mon_groups" is NULL instead of pointing to the rdtgrp.

Fix it by pointing kn->priv to rdtgrp when "mon_groups" is created. Then
it could be passed to rdtgroup_kn_lock_live()/rdtgroup_kn_unlock()
instead. And then it operates on the same rdtgroup structure but handles
the active reference of kernfs node "mon_groups" to prevent deadlock.
The same changes are also made to the "mon_data" directories.

This results in some unused function parameters that will be cleaned up
in follow-up patch as the focus here is on the fix only in support of
backporting efforts.

Fixes: c7d9aac61311 ("x86/intel_rdt/cqm: Add mkdir support for RDT monitoring")
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1578500886-21771-4-git-send-email-xiaochen.shen@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: fix soft mounts hanging in the reconnect code

commit c54849ddd832ae0a45cab16bcd1ed2db7da090d7 upstream.

RHBZ: 1795429

In recent DFS updates we have a new variable controlling how many times we will
retry to reconnect the share.
If DFS is not used, then this variable is initialized to 0 in:

static inline int
dfs_cache_get_nr_tgts(const struct dfs_cache_tgt_list *tl)
{
        return tl ? tl->tl_numtgts : 0;
}

This means that in the reconnect loop in smb2_reconnect() we will immediately wrap retries to -1
and never actually get to pass this conditional:

                if (--retries)
                        continue;

The effect is that we no longer reach the point where we fail the commands with -EHOSTDOWN
and basically the kernel threads are virtually hung and unkillable.

Fixes: a3a53b7603798fd8 (cifs: Add support for failover in smb2_reconnect())
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vfs: fix do_last() regression

commit 6404674acd596de41fd3ad5f267b4525494a891a upstream.

Brown paperbag time: fetching ->i_uid/->i_mode really should've been
done from nd->inode.  I even suggested that, but the reason for that has
slipped through the cracks and I went for dir->d_inode instead - made
for more "obvious" patch.

Analysis:

 - at the entry into do_last() and all the way to step_into(): dir (aka
   nd->path.dentry) is known not to have been freed; so's nd->inode and
   it's equal to dir->d_inode unless we are already doomed to -ECHILD.
   inode of the file to get opened is not known.

 - after step_into(): inode of the file to get opened is known; dir
   might be pointing to freed memory/be negative/etc.

 - at the call of may_create_in_sticky(): guaranteed to be out of RCU
   mode; inode of the file to get opened is known and pinned; dir might
   be garbage.

The last was the reason for the original patch.  Except that at the
do_last() entry we can be in RCU mode and it is possible that
nd->path.dentry->d_inode has already changed under us.

In that case we are going to fail with -ECHILD, but we need to be
careful; nd->inode is pointing to valid struct inode and it's the same
as nd->path.dentry->d_inode in "won't fail with -ECHILD" case, so we
should use that.

Reported-by: "Rantala, Tommi T. (Nokia - FI/Espoo)" <tommi.t.rantala@nokia.com>
Reported-by: syzbot+190005201ced78a74ad6@syzkaller.appspotmail.com
Wearing-brown-paperbag: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org
Fixes: d0cb50185ae9 ("do_last(): fetch directory ->i_mode and ->i_uid before it's too late")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.4.17

power/supply: ingenic-battery: Don't change scale if there's only one

commit 86b9182df8bb12610d4d6feac45a69f3ed57bfd2 upstream.

The ADC in the JZ4740 can work either in high-precision mode with a 2.5V
range, or in low-precision mode with a 7.5V range. The code in place in
this driver will select the proper scale according to the maximum
voltage of the battery.

The JZ4770 however only has one mode, with a 6.6V range. If only one
scale is available, there's no need to change it (and nothing to change
it to), and trying to do so will fail with -EINVAL.

Fixes: fb24ccfbe1e0 ("power: supply: add Ingenic JZ47xx battery driver.")

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Artur Rojek <contact@artur-rojek.eu>
Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "um: Enable CONFIG_CONSTRUCTORS"

commit 87c9366e17259040a9118e06b6dc8de986e5d3d1 upstream.

This reverts commit 786b2384bf1c ("um: Enable CONFIG_CONSTRUCTORS").

There are two issues with this commit, uncovered by Anton in tests
on some (Debian) systems:

1) I completely forgot to call any constructors if CONFIG_CONSTRUCTORS
   isn't set. Don't recall now if it just wasn't needed on my system, or
   if I never tested this case.

2) With that fixed, it works - with CONFIG_CONSTRUCTORS *unset*. If I
   set CONFIG_CONSTRUCTORS, it fails again, which isn't totally
   unexpected since whatever wanted to run is likely to have to run
   before the kernel init etc. that calls the constructors in this case.

Basically, some constructors that gcc emits (libc has?) need to run
very early during init; the failure mode otherwise was that the ptrace
fork test already failed:

----------------------
$ ./linux mem=512M
Core dump limits :
soft - 0
hard - NONE
Checking that ptrace can change system call numbers...check_ptrace : child exited with exitcode 6, while expecting 0; status 0x67f
Aborted
----------------------

Thinking more about this, it's clear that we simply cannot support
CONFIG_CONSTRUCTORS in UML. All the cases we need now (gcov, kasan)
involve not use of the __attribute__((constructor)), but instead
some constructor code/entry generated by gcc. Therefore, we cannot
distinguish between kernel constructors and system constructors.

Thus, revert this commit.

Cc: stable@vger.kernel.org [5.4+]
Fixes: 786b2384bf1c ("um: Enable CONFIG_CONSTRUCTORS")
Reported-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Richard Weinberger <richard@nod.at>

KVM: arm64: Write arch.mdcr_el2 changes since last vcpu_load on VHE

commit 4942dc6638b07b5326b6d2faa142635c559e7cd5 upstream.

On VHE systems arch.mdcr_el2 is written to mdcr_el2 at vcpu_load time to
set options for self-hosted debug and the performance monitors
extension.

Unfortunately the value of arch.mdcr_el2 is not calculated until
kvm_arm_setup_debug() in the run loop after the vcpu has been loaded.
This means that the initial brief iterations of the run loop use a zero
value of mdcr_el2 - until the vcpu is preempted. This also results in a
delay between changes to vcpu->guest_debug taking effect.

Fix this by writing to mdcr_el2 in kvm_arm_setup_debug() on VHE systems
when a change to arch.mdcr_el2 has been detected.

Fixes: d5a21bcc2995 ("KVM: arm64: Move common VHE/non-VHE trap config in separate functions")
Cc: <stable@vger.kernel.org> # 4.17.x-
Suggested-by: James Morse <james.morse@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: pcrypt - Fix user-after-free on module unload

commit 07bfd9bdf568a38d9440c607b72342036011f727 upstream.

On module unload of pcrypt we must unregister the crypto algorithms
first and then tear down the padata structure.  As otherwise the
crypto algorithms are still alive and can be used while the padata
structure is being freed.

Fixes: 5068c7a883d1 ("crypto: pcrypt - Add pcrypt crypto...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: caam - do not reset pointer size from MCFGR register

commit 7278fa25aa0ebcc0e62c39b12071069df13f7e77 upstream.

In commit 'a1cf573ee95 ("crypto: caam - select DMA address size at runtime")'
CAAM pointer size (caam_ptr_size) is changed from
sizeof(dma_addr_t) to runtime value computed from MCFGR register.
Therefore, do not reset MCFGR[PS].

Fixes: a1cf573ee95 ("crypto: caam - select DMA address size at runtime")
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Cc: <stable@vger.kernel.org>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Alison Wang <alison.wang@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: vmx - reject xts inputs that are too short

commit 1372a51b88fa0d5a8ed2803e4975c98da3f08463 upstream.

When the kernel XTS implementation was extended to deal with ciphertext
stealing in commit 8083b1bf8163 ("crypto: xts - add support for ciphertext
stealing"), a check was added to reject inputs that were too short.

However, in the vmx enablement - commit 239668419349 ("crypto: vmx/xts -
use fallback for ciphertext stealing"), that check wasn't added to the
vmx implementation. This disparity leads to errors like the following:

alg: skcipher: p8_aes_xts encryption unexpectedly succeeded on test vector "random: len=0 klen=64"; expected_error=-22, cfg="random: inplace may_sleep use_finup src_divs=[<flush>66.99%@+10, 33.1%@alignmask+1155]"

Return -EINVAL if asked to operate with a cryptlen smaller than the AES
block size. This brings vmx in line with the generic implementation.

Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206049
Fixes: 239668419349 ("crypto: vmx/xts - use fallback for ciphertext stealing")
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[dja: commit message]
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: af_alg - Use bh_lock_sock in sk_destruct

commit 37f96694cf73ba116993a9d2d99ad6a75fa7fdb0 upstream.

As af_alg_release_parent may be called from BH context (most notably
due to an async request that only completes after socket closure,
or as reported here because of an RCU-delayed sk_destruct call), we
must use bh_lock_sock instead of lock_sock.

Reported-by: syzbot+c2f1558d49e25cc36e5e@syzkaller.appspotmail.com
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: c840ac6af3f8 ("crypto: af_alg - Disallow bind/setkey/...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rsi: fix non-atomic allocation in completion handler

commit b9b9f9fea21830f85cf0148cd8dce001ae55ead1 upstream.

USB completion handlers are called in atomic context and must
specifically not allocate memory using GFP_KERNEL.

Fixes: a1854fae1414 ("rsi: improve RX packet handling in USB interface")
Cc: stable <stable@vger.kernel.org> # 4.17
Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rsi: fix memory leak on failed URB submission

commit 47768297481184932844ab01a86752ba31a38861 upstream.

Make sure to free the skb on failed receive-URB submission (e.g. on
disconnect or currently also due to a missing endpoint).

Fixes: a1854fae1414 ("rsi: improve RX packet handling in USB interface")
Cc: stable <stable@vger.kernel.org> # 4.17
Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rsi: fix use-after-free on probe errors

commit 92aafe77123ab478e5f5095878856ab0424910da upstream.

The driver would fail to stop the command timer in most error paths,
something which specifically could lead to the timer being freed while
still active on I/O errors during probe.

Fix this by making sure that each function starting the timer also stops
it in all relevant error paths.

Reported-by: syzbot+1d1597a5aa3679c65b9f@syzkaller.appspotmail.com
Fixes: b78e91bcfb33 ("rsi: Add new firmware loading method")
Cc: stable <stable@vger.kernel.org> # 4.12
Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rsi: fix use-after-free on failed probe and unbind

commit e93cd35101b61e4c79149be2cfc927c4b28dc60c upstream.

Make sure to stop both URBs before returning after failed probe as well
as on disconnect to avoid use-after-free in the completion handler.

Reported-by: syzbot+b563b7f8dbe8223a51e8@syzkaller.appspotmail.com
Fixes: a4302bff28e2 ("rsi: add bluetooth rx endpoint")
Fixes: dad0d04fa7ba ("rsi: Add RS9113 wireless driver")
Cc: stable <stable@vger.kernel.org> # 3.15
Cc: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com>
Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Cc: Fariya Fatima <fariyaf@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: ti-sysc: Fix missing force mstandby quirk handling

[ Upstream commit 93c60483b5feefced92b869d5f97769495bc6313 ]

Commit 03856e928b0e ("bus: ti-sysc: Handle mstandby quirk and use it for
musb") added quirk handling for mstandby quirk but did not consider that
we also need a quirk variant for SYSC_QUIRK_FORCE_MSTANDBY.

We need to use forced idle mode for both SYSC_QUIRK_SWSUP_MSTANDBY and
SYSC_QUIRK_FORCE_MSTANDBY, but SYSC_QUIRK_SWSUP_MSTANDBY also need to
additionally also configure no-idle mode when enabled.

Fixes: 03856e928b0e ("bus: ti-sysc: Handle mstandby quirk and use it for musb")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btbcm: Use the BDADDR_PROPERTY quirk

[ Upstream commit a4f95f31a9f38d9bb1fd313fcc2d0c0d48116ee3 ]

Some devices ship with the controller default address, like the
Orange Pi 3 (BCM4345C5).

Allow the bootloader to set a valid address through the device tree.

Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Allow combination of BDADDR_PROPERTY and INVALID_BDADDR quirks

[ Upstream commit 7fdf6c6a0d0e032aac2aa4537a23af1e04a397ce ]

When utilizing BDADDR_PROPERTY and INVALID_BDADDR quirks together it
results in an unconfigured controller even if the bootloader provides
a valid address. Fix this by allowing a bootloader provided address
to mark the controller as configured.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Tested-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/realtek - Move some alc236 pintbls to fallback table

[ Upstream commit d64ebdbfd4f71406f58210f5ccb16977b4cd31d2 ]

We have a new Dell machine which needs to apply the quirk
ALC255_FIXUP_DELL1_MIC_NO_PRESENCE, try to use the fallback table
to fix it this time. And we could remove all pintbls of alc236
for applying DELL1_MIC_NO_PRESENCE on Dell machines.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20191121022644.8078-2-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb-storage: Disable UAS on JMicron SATA enclosure

[ Upstream commit bc3bdb12bbb3492067c8719011576370e959a2e6 ]

Steve Ellis reported incorrect block sizes and alignement
offsets with a SATA enclosure. Adding a quirk to disable
UAS fixes the problems.

Reported-by: Steven Ellis <sellis@redhat.com>
Cc: Pacho Ramos <pachoramos@gmail.com>
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: ti-sysc: Add module enable quirk for audio AESS

[ Upstream commit 020003f763e24e4ed0bb3d8909f3940891536d5d ]

We must set the autogating bit on enable for AESS (Audio Engine SubSystem)
when probed with ti-sysc interconnect target module driver. Otherwise it
won't idle properly.

Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: sdhci-pci: Add support for Intel JSL

[ Upstream commit 315e3bd7ac19b18ba704d96cbb9b79bad485c01f ]

Add PCI Ids for Intel JSL.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: sdhci-pci: Quirk for AMD SDHC Device 0x7906

[ Upstream commit 7a869f00bb15bcefb8804d798a49b086267b03e6 ]

AMD SDHC 0x7906 requires a hard reset to clear all internal state.
Otherwise it can get into a bad state where the DATA lines are always
read as zeros.

This change requires firmware that can transition the device into
D3Cold for it to work correctly. If the firmware does not support
transitioning to D3Cold then the power state transitions are a no-op.

Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: OMAP2+: SmartReflex: add omap_sr_pdata definition

[ Upstream commit 2079fe6ea8cbd2fb2fbadba911f1eca6c362eb9b ]

The omap_sr_pdata is not declared but is exported, so add a
define for it to fix the following warning:

arch/arm/mach-omap2/pdata-quirks.c:609:36: warning: symbol 'omap_sr_pdata' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: config: aspeed-g5: Enable 8250_DW quirks

[ Upstream commit a5331a7a87ec81d5228b7421acf831b2d0c0de26 ]

This driver option is used by the AST2600 A0 boards to work around a
hardware issue.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: intel-lpss: Add Intel Comet Lake PCH-H PCI IDs

[ Upstream commit dd047dce3a6f5233b98e792e2287cc549da35879 ]

Intel Comet Lake PCH-H has the same LPSS than Intel Cannon Lake.
Add the new IDs to the list of supported devices.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/imx_ddr: Add enhanced AXI ID filter support

[ Upstream commit 44f8bd014a94ed679ddb77d0b92350d4ac4f23a5 ]

With DDR_CAP_AXI_ID_FILTER quirk, indicating HW supports AXI ID filter
which only can get bursts from DDR transaction, i.e. DDR read/write
requests.

This patch add DDR_CAP_AXI_ID_ENHANCED_FILTER quirk, indicating HW
supports AXI ID filter which can get bursts and bytes from DDR
transaction at the same time. We hope PMU always return bytes in the
driver due to it is more meaningful for users.

Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/amd: Support multiple PCI DMA aliases in IRQ Remapping

[ Upstream commit 3c124435e8dd516df4b2fc983f4415386fd6edae ]

Non-Transparent Bridge (NTB) devices (among others) may have many DMA
aliases seeing the hardware will send requests with different device ids
depending on their origin across the bridged hardware.

See commit ad281ecf1c7d ("PCI: Add DMA alias quirk for Microsemi Switchtec
NTB") for more information on this.

The AMD IOMMU IRQ remapping functionality ignores all PCI aliases for
IRQs so if devices send an interrupt from one of their aliases they
will be blocked on AMD hardware with the IOMMU enabled.

To fix this, ensure IRQ remapping is enabled for all aliases with
MSI interrupts.

This is analogous to the functionality added to the Intel IRQ remapping
code in commit 3f0c625c6ae7 ("iommu/vt-d: Allow interrupts from the entire
bus for aliased devices")

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/amd: Support multiple PCI DMA aliases in device table

[ Upstream commit 3332364e4ebc0581d133a334645a20fd13b580f1 ]

Non-Transparent Bridge (NTB) devices (among others) may have many DMA
aliases seeing the hardware will send requests with different device ids
depending on their origin across the bridged hardware.

See commit ad281ecf1c7d ("PCI: Add DMA alias quirk for Microsemi
Switchtec NTB") for more information on this.

The AMD IOMMU ignores all the PCI aliases except the last one so DMA
transfers from these aliases will be blocked on AMD hardware with the
IOMMU enabled.

To fix this, ensure the DTEs are cloned for every PCI alias. This is
done by copying the DTE data for each alias as well as the IVRS alias
every time it is changed.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: pxa2xx: Add support for Intel Comet Lake-H

[ Upstream commit f0cf17ed76cffa365001d263ced1f130ec794917 ]

Add Intel Comet Lake-H LPSS SPI PCI IDs.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20191029115802.6779-1-jarkko.nikula@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: ti-sysc: Use swsup quirks also for am335x musb

[ Upstream commit 1819ef2e2d12d5b1a6ee54ac1c2afe35cffc677c ]

Also on am335x we need the swsup quirks for musb.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: ti-sysc: Handle mstandby quirk and use it for musb

[ Upstream commit 03856e928b0e1a1c274eece1dfe4330a362c37f3 ]

We need swsup quirks for sidle and mstandby for musb to work
properly.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvbsky: add support for eyeTV Geniatech T2 lite

[ Upstream commit 14494583336880640654300c76d0f5df3360d85f ]

Adds USB ID for the eyeTV Geniatech T2 lite to the dvbsky driver.
This is a Geniatech T230C based stick without IR and a different USB ID.

Signed-off-by: Thomas Voegtle <tv@lio96.de>
Tested-by: Jan Pieter van Woerkom <jp@jpvw.nl>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Add DMA alias quirk for Intel VCA NTB

[ Upstream commit 56b4cd4b7da9ee95778eb5c8abea49f641ebfd91 ]

Intel Visual Compute Accelerator (VCA) is a family of PCIe add-in devices
exposing computational units via Non Transparent Bridges (NTB, PEX 87xx).

Similarly to MIC x200, we need to add DMA aliases to allow buffer access
when IOMMU is enabled.

Add aliases to allow computational unit access to host memory.  These
aliases mark the whole VCA device as one IOMMU group.

All possible slot numbers (0x20) are used, since we are unable to tell what
slot is used on other side.  This quirk is intended for both host and
computational unit sides.  The VCA devices have up to five functions: four
for DMA channels and one additional.

Link: https://lore.kernel.org/r/5683A335CC8BE1438C3C30C49DCC38DF637CED8E@IRSMSX102.ger.corp.intel.com
Signed-off-by: Slawomir Pawlowski <slawomir.pawlowski@intel.com>
Signed-off-by: Przemek Kitszel <przemyslawx.kitszel@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: dell-laptop: disable kbd backlight on Inspiron 10xx

[ Upstream commit 10b65e2915b2fcc606d173e98a972850101fb4c4 ]

This patch adds a quirk disabling keyboard backlight support for the
Dell Inspiron 1012 and 1018.

Those models wrongly report supporting keyboard backlight control
features (through SMBIOS tokens) even though they're not equipped with
a backlit keyboard. This led to broken controls being exposed
through sysfs by this driver which froze the system when used.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107651
Signed-off-by: Pacien TRAN-GIRARD <pacien.trangirard@pacien.net>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: mt7621-pci: add quirks for 'E2' revision using 'soc_device_attribute'

[ Upstream commit b483b4e4d3f6bfd5089b9e6dc9ba259879c6ce6f ]

Depending on revision of the chip, reset lines are inverted. Make code
more readable making use of 'soc_device_match' in driver probe function.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20191006181032.19112-1-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Fix BTF-defined map's __type macro handling of arrays

[ Upstream commit a53ba15d81995868651dd28a85d8045aef3d4e20 ]

Due to a quirky C syntax of declaring pointers to array or function
prototype, existing __type() macro doesn't work with map key/value types
that are array or function prototype. One has to create a typedef first
and use it to specify key/value type for a BPF map.  By using typeof(),
pointer to type is now handled uniformly for all kinds of types. Convert
one of self-tests as a demonstration.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191004040211.2434033-1-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu/SRIOV: add navi12 pci id for SRIOV (v2)

[ Upstream commit 57d4f3b7fd65b56f98b62817f27c461142c0bc2a ]

Add Navi12 PCI id support.

v2: flag as experimental for now (Alex)

Signed-off-by: Jiange Zhao <Jiange.Zhao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: cht_bsw_rt5645: Add quirk for boards using pmc_plt_clk_0

[ Upstream commit adebb11139029ddf1fba6f796c4a476f17eacddc ]

As of commit 648e921888ad ("clk: x86: Stop marking clocks as
CLK_IS_CRITICAL"), the cht_bsw_rt5645 driver needs to enable the clock
it's using for the codec's mclk. It does this from commit 7735bce05a9c
("ASoC: Intel: boards: use devm_clk_get() unconditionally"), enabling
pmc_plt_clk_3. However, Strago family Chromebooks use pmc_plt_clk_0 for
the codec mclk, resulting in white noise with some digital microphones.
Add a DMI-based quirk for Strago family Chromebooks to use pmc_plt_clk_0
instead - mirroring the changes made to cht_bsw_max98090_ti in
commit a182ecd3809c ("ASoC: intel: cht_bsw_max98090_ti: Add quirk for
boards using pmc_plt_clk_0") and making use of the existing
dmi_check_system() call and related infrastructure added in
commit 22af29114eb4 ("ASoC: Intel: cht-bsw-rt5645: add quirks for
SSP0/AIF1/AIF2 routing").

Signed-off-by: Sam McNally <sammc@chromium.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190917054933.209335-1-sammc@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

extcon-intel-cht-wc: Don't reset USB data connection at probe

[ Upstream commit e81b88932985c9134d410f4eaaaa9b81a3b4bd0c ]

Intel Cherry Trail Whiskey Cove extcon driver connect USB data lines to
PMIC at driver probing for further charger detection. This causes reset of
USB data sessions and removing all devices from bus. If system was
booted from Live CD or USB dongle, this makes system unusable.

Check if USB ID pin is floating and re-route data lines in this case
only, don't touch otherwise.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
[cw00.choi: Clean-up the minor coding style]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: steam: Fix input device disappearing

[ Upstream commit 20eee6e5af35d9586774e80b6e0b1850e7cc9899 ]

The `connected` value for wired devices was not properly initialized,
it must be set to `true` upon creation, because wired devices do not
generate connection events.

When a raw client (the Steam Client) uses the device, the input device
is destroyed. Then, when the raw client finishes, it must be recreated.
But since the `connected` variable was false this never happended.

Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

atm: eni: fix uninitialized variable warning

[ Upstream commit 30780d086a83332adcd9362281201cee7c3d9d19 ]

With -O3, gcc has found an actual unintialized variable stored
into an mmio register in two instances:

drivers/atm/eni.c: In function 'discard':
drivers/atm/eni.c:465:13: error: 'dma[1]' is used uninitialized in this function [-Werror=uninitialized]
   writel(dma[i*2+1],eni_dev->rx_dma+dma_wr*8+4);
             ^
drivers/atm/eni.c:465:13: error: 'dma[3]' is used uninitialized in this function [-Werror=uninitialized]

Change the code to always write zeroes instead.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

stmmac: debugfs entry name is not be changed when udev rename device name.

[ Upstream commit 481a7d154cbbd5ca355cc01cc8969876b240eded ]

Add one notifier for udev changes net device name.
Fixes: b6601323ef9e ("net: stmmac: debugfs entry name is not be changed when udev rename")

Signed-off-by: Jiping Ma <jiping.ma2@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Reduce HDMI pixel encoding if max clock is exceeded

[ Upstream commit 840c90fce6c78bc6b2c4cb9e836d70985ed32066 ]

For high-res (8K) or HFR (4K120) displays, using uncompressed pixel
formats like YCbCr444 would exceed the bandwidth of HDMI 2.0, so the
"interesting" modes would be disabled, leaving only low-res or low
framerate modes.

This change lowers the pixel encoding to 4:2:2 or 4:2:0 if the max TMDS
clock is exceeded. Verified that 8K30 and 4K120 are now available and
working with a Samsung Q900R over an HDMI 2.0b link from a Radeon 5700.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Thomas Anderson <thomasanderson@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/dma: fix variable 'cookie' set but not used

[ Upstream commit 55817b340a31951d23d1692db45522560b1d20f9 ]

The commit c18647900ec8 ("iommu/dma: Relax locking in
iommu_dma_prepare_msi()") introduced a compliation warning,

drivers/iommu/dma-iommu.c: In function 'iommu_dma_prepare_msi':
drivers/iommu/dma-iommu.c:1206:27: warning: variable 'cookie' set but
not used [-Wunused-but-set-variable]
  struct iommu_dma_cookie *cookie;
                           ^~~~~~

Fixes: c18647900ec8 ("iommu/dma: Relax locking in iommu_dma_prepare_msi()")
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>