platform/kernel/linux-exynos.git
19 years agoieee1394: fix broken signed char assumption.
Linus Torvalds [Wed, 6 Jul 2005 20:05:50 +0000 (13:05 -0700)]
ieee1394: fix broken signed char assumption.

"ack_code" is assigned (and tested against) negative numbers, but was
declared as "char".  Which only works if "char" is signed - which it
necessarily isn't.

So make that signedness assumption specific.

19 years ago[PATCH] openfirmware: implement hotplug for macio devices
Jeff Mahoney [Wed, 6 Jul 2005 19:45:09 +0000 (15:45 -0400)]
[PATCH] openfirmware: implement hotplug for macio devices

This adds the hotplug routine for generating hotplug events when devices
are seen on the macio bus.  It uses the attributed created by the sysfs
nodes to generate the hotplug environment vars for userspace.

Since the characters allowed inside the 'compatible' field are NUL
terminated, they are exported as individual OF_COMPATIBLE_# variables,
with OF_COMPATIBLE_N maintaining a count of how many there are.

In order for hotplug to work with macio devices, patches to
module-init-tools and hotplug must be applied.  Those patches are
available at:

ftp://ftp.suse.com/pub/people/jeffm/linux/macio-hotplug/

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] openfirmware: add sysfs nodes for open firmware devices
Jeff Mahoney [Wed, 6 Jul 2005 19:26:27 +0000 (15:26 -0400)]
[PATCH] openfirmware: add sysfs nodes for open firmware devices

This adds sysfs nodes that the hotplug userspace can use to load the
appropriate modules.

In order for hotplug to work with macio devices, patches to
module-init-tools and hotplug must be applied.  Those patches are
available at:

 ftp://ftp.suse.com/pub/people/jeffm/linux/macio-hotplug/

Changes: The previous versions were built on 2.6.12. 2.6.13-rcX introduced
         a device_attribute parameter to the show functions. Since that
         parameter was treated as the output buffer, memory corruption would
         result, causing Oopsen very quickly.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] openfirmware: generate device table for userspace
Jeff Mahoney [Wed, 6 Jul 2005 19:44:41 +0000 (15:44 -0400)]
[PATCH] openfirmware: generate device table for userspace

This converts the usage of struct of_match to struct of_device_id,
similar to pci_device_id.  This allows a device table to be generated,
which can be parsed by depmod(8) to generate a map file for module
loading.

In order for hotplug to work with macio devices, patches to
module-init-tools and hotplug must be applied.  Those patches are
available at:

 ftp://ftp.suse.com/pub/people/jeffm/linux/macio-hotplug/

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] Fix bt87x.c build problem for real
Dave Jones [Wed, 6 Jul 2005 19:29:09 +0000 (15:29 -0400)]
[PATCH] Fix bt87x.c build problem for real

Just the declaration fix wasn't enough to fix things in bt78x.c

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] Fix broken kmalloc_node in rc1/rc2
Christoph Lameter [Wed, 6 Jul 2005 17:47:07 +0000 (10:47 -0700)]
[PATCH] Fix broken kmalloc_node in rc1/rc2

This patch used to be in Andrew's tree before the NUMA slab allocator went
in. Either this patch or the NUMA slab allocator is needed in order for
kmalloc_node to work correctly.

pcibus_to_node may be used to generate the node information passed to
kmalloc_node. pcibus_to_node returns -1 if it was not able to determine
on which node a pcibus is located. For that case kmalloc_node must
work like kmalloc.

Signed-off-by: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] Fix bt87x.c build problem
Greg KH [Wed, 6 Jul 2005 15:51:03 +0000 (08:51 -0700)]
[PATCH] Fix bt87x.c build problem

Missing forward declaration

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] PCI: fix !CONFIG_HOTPLUG pci build problem
Greg KH [Wed, 6 Jul 2005 16:09:38 +0000 (09:09 -0700)]
[PATCH] PCI: fix !CONFIG_HOTPLUG pci build problem

Here's a patch to fix the build issue when CONFIG_HOTPLUG is not enabled
in 2.6.13-rc2.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years agoLinux v2.6.13-rc3 v2.6.13-rc2
Linus Torvalds [Wed, 6 Jul 2005 03:46:33 +0000 (20:46 -0700)]
Linux v2.6.13-rc3

19 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Wed, 6 Jul 2005 03:37:09 +0000 (20:37 -0700)]
Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

19 years ago[SPARC64]: Fix UltraSPARC-III fallout from membar changes.
David S. Miller [Wed, 6 Jul 2005 02:45:24 +0000 (19:45 -0700)]
[SPARC64]: Fix UltraSPARC-III fallout from membar changes.

The membar changes made the size of __cheetah_flush_tlb_pending
grow by one instruction, but the boot-time code patching was
not updated to match.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[PATCH] kprobes: fix namespace problem and sparc64 build
Rusty Lynch [Wed, 6 Jul 2005 01:54:50 +0000 (18:54 -0700)]
[PATCH] kprobes: fix namespace problem and sparc64 build

The following renames arch_init, a kprobes function for performing any
architecture specific initialization, to arch_init_kprobes in order to
cleanup the namespace.

Also, this patch adds arch_init_kprobes to sparc64 to fix the sparc64 kprobes
build from the last return probe patch.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc32: explicitly disable 440GP IRQ compatibility mode in 440GX setup
Eugene Surovegin [Wed, 6 Jul 2005 01:54:45 +0000 (18:54 -0700)]
[PATCH] ppc32: explicitly disable 440GP IRQ compatibility mode in 440GX setup

Add explicit disabling of 440GP IRQ compatibility mode when configuring
440GX interrupt controller.  This helps when board firmware for some reason
uses this compatibility mode and leaves it enabled.  It breaks 440GX
interrupt code because it assumes native 440GX IRQ mode.  People seems to
be continuously bitten by this.

Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc32: stop misusing NTP's time_offset value
john stultz [Wed, 6 Jul 2005 01:54:44 +0000 (18:54 -0700)]
[PATCH] ppc32: stop misusing NTP's time_offset value

As part of my timeofday rework, I've been looking at the NTP code and I
noticed that the PPC architecture is apparently misusing the NTP's
time_offset (it is a terrible name!) value as some form of timezone offset.

This could cause problems when time_offset changed by the NTP code.  This
patch changes the PPC code so it uses a more clear local variable:
timezone_offset.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Acked-by: Tom Rini <trini@kernel.crashing.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc32: add Freescale MPC885ADS board support
Andrei Konovalov [Wed, 6 Jul 2005 01:54:43 +0000 (18:54 -0700)]
[PATCH] ppc32: add Freescale MPC885ADS board support

This patch adds the Freescale MPC86xADS board support.  The supported
devices are SMC UART and 10Mbit ethernet on SCC1.

The manual for the board says that it "is compatible with the MPC8xxFADS
for software point of view".  That's why this patch extends FADS instead of
introducing a new platform.

FEC is not supported as the "combined FCC/FEC ethernet driver" driver by
Pantelis Antoniou should replace the current FEC driver.

Signed-off-by: Gennadiy Kurtsman <gkurtsman@ru.mvista.com>
Signed-off-by: Andrei Konovalov <akonovalov@ru.mvista.com>
Acked-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Wed, 6 Jul 2005 01:41:58 +0000 (18:41 -0700)]
Merge /pub/scm/linux/kernel/git/davem/net-2.6

19 years ago[IPV4]: Add LC-Trie implementation notes
Robert Olsson [Tue, 5 Jul 2005 23:38:26 +0000 (16:38 -0700)]
[IPV4]: Add LC-Trie implementation notes

Signed-off-by: Robert Olsson <Robert.Olsson@data.slu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TCP]: Never TSO defer under periods of congestion.
David S. Miller [Tue, 5 Jul 2005 22:43:58 +0000 (15:43 -0700)]
[TCP]: Never TSO defer under periods of congestion.

Congestion window recover after loss depends upon the fact
that if we have a full MSS sized frame at the head of the
send queue, we will send it.  TSO deferral can defeat the
ACK clocking necessary to exit cleanly from recovery.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[PKT_SCHED]: Blackhole queueing discipline
Thomas Graf [Tue, 5 Jul 2005 22:29:16 +0000 (15:29 -0700)]
[PKT_SCHED]: Blackhole queueing discipline

Useful in combination with classful qdiscs to drop or
temporary disable certain flows, e.g. one could block
specific ds flows with dsmark.

Unlike the noop qdisc it can be controlled by the user and
statistic accounting is done.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TCP]: Move to new TSO segmenting scheme.
David S. Miller [Tue, 5 Jul 2005 22:24:38 +0000 (15:24 -0700)]
[TCP]: Move to new TSO segmenting scheme.

Make TSO segment transmit size decisions at send time not earlier.

The basic scheme is that we try to build as large a TSO frame as
possible when pulling in the user data, but the size of the TSO frame
output to the card is determined at transmit time.

This is guided by tp->xmit_size_goal.  It is always set to a multiple
of MSS and tells sendmsg/sendpage how large an SKB to try and build.

Later, tcp_write_xmit() and tcp_push_one() chop up the packet if
necessary and conditions warrant.  These routines can also decide to
"defer" in order to wait for more ACKs to arrive and thus allow larger
TSO frames to be emitted.

A general observation is that TSO elongates the pipe, thus requiring a
larger congestion window and larger buffering especially at the sender
side.  Therefore, it is important that applications 1) get a large
enough socket send buffer (this is accomplished by our dynamic send
buffer expansion code) 2) do large enough writes.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TCP]: Break out send buffer expansion test.
David S. Miller [Tue, 5 Jul 2005 22:21:10 +0000 (15:21 -0700)]
[TCP]: Break out send buffer expansion test.

This makes it easier to understand, and allows easier
tweaking of the heuristic later on.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TCP]: Do not call tcp_tso_acked() if no work to do.
David S. Miller [Tue, 5 Jul 2005 22:20:55 +0000 (15:20 -0700)]
[TCP]: Do not call tcp_tso_acked() if no work to do.

In tcp_clean_rtx_queue(), if the TSO packet is not even partially
acked, do not waste time calling tcp_tso_acked().

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TCP]: Kill bogus comment above tcp_tso_acked().
David S. Miller [Tue, 5 Jul 2005 22:20:41 +0000 (15:20 -0700)]
[TCP]: Kill bogus comment above tcp_tso_acked().

Everything stated there is out of data.  tcp_trim_skb()
does adjust the available socket send buffer space and
skb->truesize now.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TCP]: Fix send-side cpu utiliziation regression.
David S. Miller [Tue, 5 Jul 2005 22:20:27 +0000 (15:20 -0700)]
[TCP]: Fix send-side cpu utiliziation regression.

Only put user data purely to pages when doing TSO.

The extra page allocations cause two problems:

1) Add the overhead of the page allocations themselves.
2) Make us do small user copies when we get to the end
   of the TCP socket cache page.

It is still beneficial to purely use pages for TSO,
so we will do it for that case.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TCP]: Eliminate redundant computations in tcp_write_xmit().
David S. Miller [Tue, 5 Jul 2005 22:20:09 +0000 (15:20 -0700)]
[TCP]: Eliminate redundant computations in tcp_write_xmit().

tcp_snd_test() is run for every packet output by a single
call to tcp_write_xmit(), but this is not necessary.

For one, the congestion window space needs to only be
calculated one time, then used throughout the duration
of the loop.

This cleanup also makes experimenting with different TSO
packetization schemes much easier.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TCP]: Break out tcp_snd_test() into it's constituent parts.
David S. Miller [Tue, 5 Jul 2005 22:19:54 +0000 (15:19 -0700)]
[TCP]: Break out tcp_snd_test() into it's constituent parts.

tcp_snd_test() does several different things, use inline
functions to express this more clearly.

1) It initializes the TSO count of SKB, if necessary.
2) It performs the Nagle test.
3) It makes sure the congestion window is adhered to.
4) It makes sure SKB fits into the send window.

This cleanup also sets things up so that things like the
available packets in the congestion window does not need
to be calculated multiple times by packet sending loops
such as tcp_write_xmit().

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TCP]: Fix __tcp_push_pending_frames() 'nonagle' handling.
David S. Miller [Tue, 5 Jul 2005 22:19:38 +0000 (15:19 -0700)]
[TCP]: Fix __tcp_push_pending_frames() 'nonagle' handling.

'nonagle' should be passed to the tcp_snd_test() function
as 'TCP_NAGLE_PUSH' if we are checking an SKB not at the
tail of the write_queue.  This is because Nagle does not
apply to such frames since we cannot possibly tack more
data onto them.

However, while doing this __tcp_push_pending_frames() makes
all of the packets in the write_queue use this modified
'nonagle' value.

Fix the bug and simplify this function by just calling
tcp_write_xmit() directly if sk_send_head is non-NULL.

As a result, we can now make tcp_data_snd_check() just call
tcp_push_pending_frames() instead of the specialized
__tcp_data_snd_check().

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TCP]: Fix redundant calculations of tcp_current_mss()
David S. Miller [Tue, 5 Jul 2005 22:19:23 +0000 (15:19 -0700)]
[TCP]: Fix redundant calculations of tcp_current_mss()

tcp_write_xmit() uses tcp_current_mss(), but some of it's callers,
namely __tcp_push_pending_frames(), already has this value available
already.

While we're here, fix the "cur_mss" argument to be "unsigned int"
instead of plain "unsigned".

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TCP]: tcp_write_xmit() tabbing cleanup
David S. Miller [Tue, 5 Jul 2005 22:19:06 +0000 (15:19 -0700)]
[TCP]: tcp_write_xmit() tabbing cleanup

Put the main basic block of work at the top-level of
tabbing, and mark the TCP_CLOSE test with unlikely().

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TCP]: Kill extra cwnd validate in __tcp_push_pending_frames().
David S. Miller [Tue, 5 Jul 2005 22:18:51 +0000 (15:18 -0700)]
[TCP]: Kill extra cwnd validate in __tcp_push_pending_frames().

The tcp_cwnd_validate() function should only be invoked
if we actually send some frames, yet __tcp_push_pending_frames()
will always invoke it.  tcp_write_xmit() does the call for us,
so the call here can simply be removed.

Also, tcp_write_xmit() can be marked static.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TCP]: Add missing skb_header_release() call to tcp_fragment().
David S. Miller [Tue, 5 Jul 2005 22:18:34 +0000 (15:18 -0700)]
[TCP]: Add missing skb_header_release() call to tcp_fragment().

When we add any new packet to the TCP socket write queue,
we must call skb_header_release() on it in order for the
TSO sharing checks in the drivers to work.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TCP]: Move __tcp_data_snd_check into tcp_output.c
David S. Miller [Tue, 5 Jul 2005 22:18:18 +0000 (15:18 -0700)]
[TCP]: Move __tcp_data_snd_check into tcp_output.c

It reimplements portions of tcp_snd_check(), so it
we move it to tcp_output.c we can consolidate it's
logic much easier in a later change.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TCP]: Move send test logic out of net/tcp.h
David S. Miller [Tue, 5 Jul 2005 22:18:03 +0000 (15:18 -0700)]
[TCP]: Move send test logic out of net/tcp.h

This just moves the code into tcp_output.c, no code logic changes are
made by this patch.

Using this as a baseline, we can begin to untangle the mess of
comparisons for the Nagle test et al.  We will also be able to reduce
all of the redundant computation that occurs when outputting data
packets.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TCP]: Fix quick-ack decrementing with TSO.
David S. Miller [Tue, 5 Jul 2005 22:17:45 +0000 (15:17 -0700)]
[TCP]: Fix quick-ack decrementing with TSO.

On each packet output, we call tcp_dec_quickack_mode()
if the ACK flag is set.  It drops tp->ack.quick until
it hits zero, at which time we deflate the ATO value.

When doing TSO, we are emitting multiple packets with
ACK set, so we should decrement tp->ack.quick that many
segments.

Note that, unlike this case, tcp_enter_cwr() should not
take the tcp_skb_pcount(skb) into consideration.  That
function, one time, readjusts tp->snd_cwnd and moves
into TCP_CA_CWR state.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TCP]: Simplify SKB data portion allocation with NETIF_F_SG.
David S. Miller [Tue, 5 Jul 2005 22:17:25 +0000 (15:17 -0700)]
[TCP]: Simplify SKB data portion allocation with NETIF_F_SG.

The ideal and most optimal layout for an SKB when doing
scatter-gather is to put all the headers at skb->data, and
all the user data in the page array.

This makes SKB splitting and combining extremely simple,
especially before a packet goes onto the wire the first
time.

So, when sk_stream_alloc_pskb() is given a zero size, make
sure there is no skb_tailroom().  This is achieved by applying
SKB_DATA_ALIGN() to the header length used here.

Next, make select_size() in TCP output segmentation use a
length of zero when NETIF_F_SG is true on the outgoing
interface.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NET]: Remove __ARGS from include/net/slhc_vj.h
Alexey Dobriyan [Tue, 5 Jul 2005 22:12:04 +0000 (15:12 -0700)]
[NET]: Remove __ARGS from include/net/slhc_vj.h

I suspect "#define __ARGS(x) ()" was deprecated before I was born.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NET]: improve readability of dev_set_promiscuity() in net/core/dev.c
David Chau [Tue, 5 Jul 2005 22:11:06 +0000 (15:11 -0700)]
[NET]: improve readability of dev_set_promiscuity() in net/core/dev.c

A trivial patch to improve the readability of dev_set_promiscuity()
in net/core/dev.c. New code does exactly the same thing as original
code.

Signed-off-by: David Chau <ddcc@mit.edu>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[SHAPER]: Switch to spinlocks.
Christoph Hellwig [Tue, 5 Jul 2005 22:03:46 +0000 (15:03 -0700)]
[SHAPER]: Switch to spinlocks.

Dave, you were right and the sleeping locks in shaper were
broken. Markus Kanet noticed this and also tested the patch below that
switches locking to spinlocks.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[IPV4]: More broken memory allocation fixes for fib_trie
Robert Olsson [Tue, 5 Jul 2005 22:02:40 +0000 (15:02 -0700)]
[IPV4]: More broken memory allocation fixes for fib_trie

Below a patch to preallocate memory when doing resize of trie (inflate halve)
If preallocations fails it just skips the resize of this tnode for this time.

The oops we got when killing bgpd (with full routing) is now gone.
Patrick memory patch is also used.

Signed-off-by: Robert Olsson <robert.olsson@its.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[DECNET]: Fix memset overflow on 64bit archs while dumping decnet routing rules
Thomas Graf [Tue, 5 Jul 2005 22:01:25 +0000 (15:01 -0700)]
[DECNET]: Fix memset overflow on 64bit archs while dumping decnet routing rules

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[IPV4]: Bug fix in rt_check_expire()
Eric Dumazet [Tue, 5 Jul 2005 22:00:32 +0000 (15:00 -0700)]
[IPV4]: Bug fix in rt_check_expire()

- rt_check_expire() fixes (an overflow occured if size of the hash
  was >= 65536)

reminder of the bugfix:

The rt_check_expire() has a serious problem on machines with large
route caches, and a standard HZ value of 1000.

With default values, ie ip_rt_gc_interval = 60*HZ = 60000 ;

the loop count :

     for (t = ip_rt_gc_interval << rt_hash_log; t >= 0;

overflows (t is a 31 bit value) as soon rt_hash_log is >= 16  (65536
slots in route cache hash table).

In this case, rt_check_expire() does nothing at all

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[IPV4]: Use the fancy alloc_large_system_hash() function for route hash table
Eric Dumazet [Tue, 5 Jul 2005 21:58:19 +0000 (14:58 -0700)]
[IPV4]: Use the fancy alloc_large_system_hash() function for route hash table

- rt hash table allocated using alloc_large_system_hash() function.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NET]: Hashed spinlocks in net/ipv4/route.c
Eric Dumazet [Tue, 5 Jul 2005 21:55:24 +0000 (14:55 -0700)]
[NET]: Hashed spinlocks in net/ipv4/route.c

- Locking abstraction
- Spinlocks moved out of rt hash table : Less memory (50%) used by rt
  hash table. it's a win even on UP.
- Sizing of spinlocks table depends on NR_CPUS

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[IPV4]: Handle large allocations in fib_trie
Patrick McHardy [Tue, 5 Jul 2005 21:44:55 +0000 (14:44 -0700)]
[IPV4]: Handle large allocations in fib_trie

Inflating a node a couple of times makes it exceed the 128k kmalloc limit.
Use __get_free_pages for allocations > PAGE_SIZE, as in fib_hash.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Acked-by: Robert Olsson <Robert.Olsson@data.slu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TG3]: Update driver version and reldate.
David S. Miller [Tue, 5 Jul 2005 21:43:19 +0000 (14:43 -0700)]
[TG3]: Update driver version and reldate.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TG3]: support for ethtool -C
Michael Chan [Tue, 5 Jul 2005 21:42:33 +0000 (14:42 -0700)]
[TG3]: support for ethtool -C

Add support for ethtool -C with verification of user parameters.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[IPV6]: Makes IPv6 rcv registration happen last during initialisation.
Herbert Xu [Tue, 5 Jul 2005 21:41:20 +0000 (14:41 -0700)]
[IPV6]: Makes IPv6 rcv registration happen last during initialisation.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[IPV4]: Fix crash in ip_rcv while booting related to netconsole
Herbert Xu [Tue, 5 Jul 2005 21:40:10 +0000 (14:40 -0700)]
[IPV4]: Fix crash in ip_rcv while booting related to netconsole

Makes IPv4 ip_rcv registration happen last in af_inet.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[SKGE]: Fix build on big-endian
David S. Miller [Tue, 5 Jul 2005 21:24:35 +0000 (14:24 -0700)]
[SKGE]: Fix build on big-endian

Missing PCI_REV_DESC define.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years agoMerge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Tue, 5 Jul 2005 21:17:40 +0000 (14:17 -0700)]
Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

19 years ago[PKT_SCHED]: Report rate estimator configuration errors during qdisc allocation
Thomas Graf [Tue, 5 Jul 2005 21:15:53 +0000 (14:15 -0700)]
[PKT_SCHED]: Report rate estimator configuration errors during qdisc allocation

Current behaviour is to not report an error if a rate
estimator is created together with a qdisc and the
configuration of the rate estimator is bogus. This leads
to unexpected behaviour because the user is not notified.

New behaviour is to report the error and let the whole
qdisc creation operation fail so the user is able to fix
his mistake.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[PKT_SCHED]: Cleanup qdisc creation and alignment macros
Thomas Graf [Tue, 5 Jul 2005 21:15:09 +0000 (14:15 -0700)]
[PKT_SCHED]: Cleanup qdisc creation and alignment macros

Adds qdisc_alloc() to share code between qdisc_create()
and qdisc_create_dflt(). Hides the qdisc alignment behind
macros and makes use of them.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[PKT_SCHED]: Move sch_generic.c prototypes to correct header file
Thomas Graf [Tue, 5 Jul 2005 21:14:30 +0000 (14:14 -0700)]
[PKT_SCHED]: Move sch_generic.c prototypes to correct header file

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NET]: Reduce size of sk_buff by 4 bytes
Thomas Graf [Tue, 5 Jul 2005 21:13:41 +0000 (14:13 -0700)]
[NET]: Reduce size of sk_buff by 4 bytes

Reduce local_df to a bit field and ip_summed to a 2 bits
field thus saving 13 bits. Move bit fields, packet type,
and protocol into the spare area between the priority
and the destructor. Saves 4 bytes on both, 32bit and
64bit architectures.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NET]: Remove unused security member in sk_buff
Thomas Graf [Tue, 5 Jul 2005 21:12:44 +0000 (14:12 -0700)]
[NET]: Remove unused security member in sk_buff

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NET]: net/core/filter.c: make len cover the entire packet
Patrick McHardy [Tue, 5 Jul 2005 21:10:40 +0000 (14:10 -0700)]
[NET]: net/core/filter.c: make len cover the entire packet

As suggested by Herbert Xu:

Since we don't require anything to be in the linear packet range
anymore make len cover the entire packet.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NET]: Consolidate common code in net/core/filter.c
Patrick McHardy [Tue, 5 Jul 2005 21:10:21 +0000 (14:10 -0700)]
[NET]: Consolidate common code in net/core/filter.c

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NET]: Remove redundant code in net/core/filter.c
Patrick McHardy [Tue, 5 Jul 2005 21:08:57 +0000 (14:08 -0700)]
[NET]: Remove redundant code in net/core/filter.c

skb_header_pointer handles linear and non-linear data, no need to handle
linear data again.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NET]: Fix signedness issues in net/core/filter.c
Patrick McHardy [Tue, 5 Jul 2005 21:08:10 +0000 (14:08 -0700)]
[NET]: Fix signedness issues in net/core/filter.c

This is the code to load packet data into a register:

                        k = fentry->k;
                        if (k < 0) {
...
                        } else {
                                u32 _tmp, *p;
                                p = skb_header_pointer(skb, k, 4, &_tmp);
                                if (p != NULL) {
                                        A = ntohl(*p);
                                        continue;
                                }
                        }

skb_header_pointer checks if the requested data is within the
linear area:

        int hlen = skb_headlen(skb);

        if (offset + len <= hlen)
                return skb->data + offset;

When offset is within [INT_MAX-len+1..INT_MAX] the addition will
result in a negative number which is <= hlen.

I couldn't trigger a crash on my AMD64 with 2GB of memory, but a
coworker tried on his x86 machine and it crashed immediately.

This patch fixes the check in skb_header_pointer to handle large
positive offsets similar to skb_copy_bits. Invalid data can still
be accessed using negative offsets (also similar to skb_copy_bits),
anyone using negative offsets needs to verify them himself.

Thanks to Thomas Vögtle <thomas.voegtle@coreworks.de> for verifying the
problem by crashing his machine and providing me with an Oops.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
Linus Torvalds [Tue, 5 Jul 2005 18:35:58 +0000 (11:35 -0700)]
Merge /pub/scm/linux/kernel/git/gregkh/pci-2.6

19 years ago[SPARC64]: Fix IRQ retry interval timer value on sparc64 PCI controllers.
David S. Miller [Mon, 4 Jul 2005 22:58:19 +0000 (15:58 -0700)]
[SPARC64]: Fix IRQ retry interval timer value on sparc64 PCI controllers.

Use '5' instead of 'infinity'.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[SPARC64]: Small Schizo PCI controller programming tweaks.
David S. Miller [Mon, 4 Jul 2005 21:53:33 +0000 (14:53 -0700)]
[SPARC64]: Small Schizo PCI controller programming tweaks.

Use macro instead of magic value for Tomatillo discard-
timeout interrupt enable register bit.

Leave OBP programming PTO value unless Tomatillo and
version >= 0x2.

If no-bus-parking property is present, explicitly clear
PCICTRL_PARK bit.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[SPARC64]: Do proper DMA IRQ syncing on Tomatillo
David S. Miller [Mon, 4 Jul 2005 20:26:04 +0000 (13:26 -0700)]
[SPARC64]: Do proper DMA IRQ syncing on Tomatillo

This was the main impetus behind adding the PCI IRQ shim.

In order to properly order DMA writes wrt. interrupts, you have to
write to a PCI controller register, then poll for that bit clearing.
There is one bit for each interrupt source, and setting this register
bit tells Tomatillo to drain all pending DMA from that device.

Furthermore, Tomatillo's with revision less than 4 require us to do a
block store due to some memory transaction ordering issues it has on
JBUS.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[SPARC64]: Add support for IRQ pre-handlers.
David S. Miller [Mon, 4 Jul 2005 20:24:38 +0000 (13:24 -0700)]
[SPARC64]: Add support for IRQ pre-handlers.

This allows a PCI controller to shim into IRQ delivery
so that DMA queues can be drained, if necessary.

If some bus specific code needs to run before an IRQ
handler is invoked, the bus driver simply needs to setup
the function pointer in bucket->irq_info->pre_handler and
the two args bucket->irq_info->pre_handler_arg[12].

The Schizo PCI driver is converted over to use a pre-handler
for the DMA write-sync processing it needs when a device
is behind a PCI->PCI bus deeper than the top-level APB
bridges.

While we're here, clean up all of the action allocation
and handling.  Now, we allocate the irqaction as part of
the bucket->irq_info area.  There is an array of 4 irqaction
(for PCI irq sharing) and a bitmask saying which entries
are active.

The bucket->irq_info is allocated at build_irq() time, not
at request_irq() time.  This simplifies request_irq() and
free_irq() tremendously.

The SMP dynamic IRQ retargetting code got removed in this
change too.  It was disabled for a few months now, and we
can resurrect it in the future if we want.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[SPARC]: bpp: remove sleep_on usage
Christoph Hellwig [Mon, 4 Jul 2005 20:24:14 +0000 (13:24 -0700)]
[SPARC]: bpp: remove sleep_on usage

Use schedule_timeout() instead of sleep_on + timer.  Totally untested
due to lack of hardware, but the changes are rather trivial.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[SPARC64/COMPAT]: Add some compat ioctl for ppdev
Raphael Assenat [Mon, 4 Jul 2005 20:23:45 +0000 (13:23 -0700)]
[SPARC64/COMPAT]: Add some compat ioctl for ppdev

The following patch adds some ioctls to include/linux/compat_ioctl.h
to allow using ppdev from the 32 bit user space on sparc64.

This patch also adds the PPDEV option in the sparc64 menu, near Parallel
printer support in the 'General machine setup' submenu.

All those ioctls seem to be compatible, since (correct me if I'm wrong)
they dont use the 'long' type. See include/linux/ppdev.h.

The application I used to test the new ioctls only used the following:
PPEXCL
PPCLAIM
PPNEGOT
PPGETMODES
PPRCONTROL
PPWCONTROL
PPDATADIR
PPWDATA
PPRDATA

But I beleive that the other ioctls will work fine.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[PATCH] ARM: Fix new-ABI layout of struct stat64
Russell King [Mon, 4 Jul 2005 12:02:46 +0000 (13:02 +0100)]
[PATCH] ARM: Fix new-ABI layout of struct stat64

Add __attribute__((packed)) to ensure that the stat64 structure is
correctly laid out no matter which ABI the kernel is compiled for.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[PATCH] ARM: Fix non-standard PXA io_pg_offst initialisers
Russell King [Mon, 4 Jul 2005 09:44:34 +0000 (10:44 +0100)]
[PATCH] ARM: Fix non-standard PXA io_pg_offst initialisers

These didn't match my sed expression correctly, fix them up manually.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[PATCH] ARM: Change 'param_offset' to 'boot_params'
Russell King [Mon, 4 Jul 2005 09:43:36 +0000 (10:43 +0100)]
[PATCH] ARM: Change 'param_offset' to 'boot_params'

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Sun, 3 Jul 2005 21:39:33 +0000 (14:39 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

19 years agoMerge master.kernel.org:/home/rmk/linux-2.6-serial
Linus Torvalds [Sun, 3 Jul 2005 21:37:09 +0000 (14:37 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-serial

19 years ago[PATCH] Serial: Fix console port spinlock initialisation
Russell King [Sun, 3 Jul 2005 20:05:45 +0000 (21:05 +0100)]
[PATCH] Serial: Fix console port spinlock initialisation

Initialise the spinlock for port being used by the console early, but
don't re-initialise it again later.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[PATCH] ARM: 2784/1: Fix the block cache flush operation range
Catalin Marinas [Sun, 3 Jul 2005 16:53:25 +0000 (17:53 +0100)]
[PATCH] ARM: 2784/1: Fix the block cache flush operation range

Patch from Catalin Marinas

The range for the ARMv6 block cache operations is inclusive but the
kernel doesn't re-calculate the end address, causing a page fault when
used (this only happens with support for cache aliasing, otherwise the
blk_flush_kern_dcache_page() is not called). This patch subtracts
L1_CACHE_BYTES from the end address.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[PATCH] ARM: 2785/1: S3C24XX - serial calls request_irq() with IRQs disabled
Ben Dooks [Sun, 3 Jul 2005 16:44:40 +0000 (17:44 +0100)]
[PATCH] ARM: 2785/1: S3C24XX - serial calls request_irq() with IRQs disabled

Patch from Ben Dooks

The request_irq() function is called by s3c24xx uart driver with
the local IRQs disabled. The request_irq() function can allocate
memory via kmalloc(), and this may sleep causing a warning about
sleeping in an invalid context.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[PATCH] ARM: Remove machine description macros
Russell King [Sun, 3 Jul 2005 16:38:58 +0000 (17:38 +0100)]
[PATCH] ARM: Remove machine description macros

Remove the pointless machine description macros, favouring C99
initialisers instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[PATCH] drivers/ide/Makefile: kill dead CONFIG_BLK_DEV_IDE_TCQ entry
Adrian Bunk [Sun, 3 Jul 2005 15:44:10 +0000 (17:44 +0200)]
[PATCH] drivers/ide/Makefile: kill dead CONFIG_BLK_DEV_IDE_TCQ entry

This patch kills the dead CONFIG_BLK_DEV_IDE_TCQ entry.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
19 years ago[PATCH] amd74xx: support MCP55 device IDs
Rob Punkunus [Sun, 3 Jul 2005 15:37:18 +0000 (17:37 +0200)]
[PATCH] amd74xx: support MCP55 device IDs

From: Rob Punkunus <rpunkunus@nvidia.com>

Rob Punkunus recently submitted a patch to enable support for MCP51/MCP55 in
the amd74xx driver. This patch was whitespace-corrupted and didn't apply to
2.6.12 since MCP51 support was merged in the 2.6.12-rc series.

Gentoo would like to support this hardware for our upcoming release media, so
I fixed the patch, and here it is :)

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
19 years ago[PATCH] ide: fix line break in ide messages
Denis Vlasenko [Sun, 3 Jul 2005 15:09:13 +0000 (17:09 +0200)]
[PATCH] ide: fix line break in ide messages

From: Denis Vlasenko <vda@ilport.com.ua>

* printk("\n") is misplaced, resulting in stray empty line in kernel log
* cleanups nerby: some back-to-back printks are combined, etc

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
19 years ago[PATCH] ide: hotplug mark __devinit via82cxxx.c
Herbert Xu [Sun, 3 Jul 2005 14:42:18 +0000 (16:42 +0200)]
[PATCH] ide: hotplug mark __devinit via82cxxx.c

From: Herbert Xu <herbert@gondor.apana.org.au>

mark the __init section __devinit.
Splitted up from the Debian kernel patch.

Signed-off-by: maximilian attems <janitor@sternwelten.at>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
19 years ago[PATCH] ide: hotplug mark __devinit triflex.c
Herbert Xu [Sun, 3 Jul 2005 14:40:31 +0000 (16:40 +0200)]
[PATCH] ide: hotplug mark __devinit triflex.c

From: Herbert Xu <herbert@gondor.apana.org.au>

mark the __init section __devinit.
Splitted up from the Debian kernel patch.

Signed-off-by: maximilian attems <janitor@sternwelten.at>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
19 years ago[PATCH] ide: hotplug mark __devinit slc90e66.c
Herbert Xu [Sun, 3 Jul 2005 14:38:51 +0000 (16:38 +0200)]
[PATCH] ide: hotplug mark __devinit slc90e66.c

From: Herbert Xu <herbert@gondor.apana.org.au>

mark the __init section __devinit.
Splitted up from the Debian kernel patch.

Signed-off-by: maximilian attems <janitor@sternwelten.at>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
19 years ago[PATCH] ide: hotplug mark __devinit sl82c105.c
Herbert Xu [Sun, 3 Jul 2005 14:36:56 +0000 (16:36 +0200)]
[PATCH] ide: hotplug mark __devinit sl82c105.c

From: Herbert Xu <herbert@gondor.apana.org.au>

mark the __init section __devinit.
Splitted up from the Debian kernel patch.

Signed-off-by: maximilian attems <janitor@sternwelten.at>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
19 years ago[PATCH] ide: hotplug mark __devinit sc1200.c
Herbert Xu [Sun, 3 Jul 2005 14:35:07 +0000 (16:35 +0200)]
[PATCH] ide: hotplug mark __devinit sc1200.c

From: Herbert Xu <herbert@gondor.apana.org.au>

mark the __init section __devinit.
Splitted up from the Debian kernel patch.

Signed-off-by: maximilian attems <janitor@sternwelten.at>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
19 years ago[PATCH] ide: hotplug mark __devinit opti621.c
Herbert Xu [Sun, 3 Jul 2005 14:33:16 +0000 (16:33 +0200)]
[PATCH] ide: hotplug mark __devinit opti621.c

From: Herbert Xu <herbert@gondor.apana.org.au>

mark the __init section __devinit.
Splitted up from the Debian kernel patch.

Signed-off-by: maximilian attems <janitor@sternwelten.at>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
19 years ago[PATCH] ide: hotplug mark __devinit ns87415.c
Herbert Xu [Sun, 3 Jul 2005 14:31:04 +0000 (16:31 +0200)]
[PATCH] ide: hotplug mark __devinit ns87415.c

From: Herbert Xu <herbert@gondor.apana.org.au>

mark the __init section __devinit.
Splitted up from the Debian kernel patch.

Signed-off-by: maximilian attems <janitor@sternwelten.at>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
19 years ago[PATCH] ide: hotplug mark __devinit it8172.c
Herbert Xu [Sun, 3 Jul 2005 14:28:44 +0000 (16:28 +0200)]
[PATCH] ide: hotplug mark __devinit it8172.c

From: Herbert Xu <herbert@gondor.apana.org.au>

mark the __init section __devinit.
Splitted up from the Debian kernel patch.

Signed-off-by: maximilian attems <janitor@sternwelten.at>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
19 years ago[PATCH] ide: hotplug mark __devinit cy82c693.c
Herbert Xu [Sun, 3 Jul 2005 14:25:46 +0000 (16:25 +0200)]
[PATCH] ide: hotplug mark __devinit cy82c693.c

From: Herbert Xu <herbert@gondor.apana.org.au>

mark the __init section __devinit.
Splitted up from the Debian kernel patch.

Signed-off-by: maximilian attems <janitor@sternwelten.at>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
19 years ago[PATCH] ide: hotplug mark __devinit cs5530.c
Herbert Xu [Sun, 3 Jul 2005 14:23:08 +0000 (16:23 +0200)]
[PATCH] ide: hotplug mark __devinit cs5530.c

From: Herbert Xu <herbert@gondor.apana.org.au>

mark the __init section __devinit.
Splitted up from the Debian kernel patch.

Signed-off-by: maximilian attems <janitor@sternwelten.at>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
19 years ago[PATCH] ide: hotplug mark __devinit amd74xx.c
Herbert Xu [Sun, 3 Jul 2005 14:15:41 +0000 (16:15 +0200)]
[PATCH] ide: hotplug mark __devinit amd74xx.c

From: Herbert Xu <herbert@gondor.apana.org.au>

mark the __init section __devinit.
Splitted up from the Debian kernel patch.

Signed-off-by: maximilian attems <janitor@sternwelten.at>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
19 years ago[PATCH] ide: hotplug mark __devinit alim15x3.c
Herbert Xu [Sun, 3 Jul 2005 14:06:13 +0000 (16:06 +0200)]
[PATCH] ide: hotplug mark __devinit alim15x3.c

From: Herbert Xu <herbert@gondor.apana.org.au>

mark the __init section __devinit.
Splitted up from the Debian kernel patch.

see the thread about the pci hotplug crash on a stratus box.
http://marc.theaimsgroup.com/?l=linux-kernel&m=111930108613386&w=2

Signed-off-by: maximilian attems <janitor@sternwelten.at>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
19 years agoMerge master.kernel.org:/home/rmk/linux-2.6-mmc
Linus Torvalds [Sat, 2 Jul 2005 17:39:09 +0000 (10:39 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-mmc

19 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Sat, 2 Jul 2005 17:37:50 +0000 (10:37 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

19 years agoIf ACPI doesn't find an irq listed, don't accept 0 as a valid PCI irq.
Linus Torvalds [Sat, 2 Jul 2005 17:35:33 +0000 (10:35 -0700)]
If ACPI doesn't find an irq listed, don't accept 0 as a valid PCI irq.

That zero just means that nothing else found any irq information either.

19 years ago[PATCH] gregkh-pci-pci-assign-unassigned-resources fix
Andy Whitcroft [Mon, 20 Jun 2005 21:29:25 +0000 (14:29 -0700)]
[PATCH] gregkh-pci-pci-assign-unassigned-resources fix

It seems that X86 architectures in general need the setup-bus.o
not just those with HOTPLUG.  This avoids the following error on
X86_NUMAQ and x86_64:

    arch/i386/pci/built-in.o(.init.text+0x15a6): In function `pcibios_init':
    : undefined reference to `pci_assign_unassigned_resources'

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] pci: cleanup argument comments for pci_{save,restore}_state
John W. Linville [Fri, 1 Jul 2005 18:07:28 +0000 (14:07 -0400)]
[PATCH] pci: cleanup argument comments for pci_{save,restore}_state

The buffer arguments have been removed from pci_{save,restore}_state.
The comment blocks for those functions should reflect that.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] PCI: Remove newline from pci MODALIAS variable
Hannes Reinecke [Tue, 28 Jun 2005 12:57:10 +0000 (14:57 +0200)]
[PATCH] PCI: Remove newline from pci MODALIAS variable

the pci core sends out a hotplug event variable MODALIAS with a trailing
newline. This is inconsistent with all other event variables and breaks
some hotplug tools. This patch removes the said newline.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] PCI: acpi tg3 ethernet not coming back properly after S3 suspendon DellM70
long [Wed, 22 Jun 2005 16:09:54 +0000 (09:09 -0700)]
[PATCH] PCI: acpi tg3 ethernet not coming back properly after S3 suspendon DellM70

This patch, is based on kernel 2.6.12, provides a fix for PCIe
port bus driver suspend/resume.

Signed-off-by: T. Long Nguyen <tom.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] PCI: Add PCI quirk for SMBus on the Asus P4B-LX
Jean Delvare [Wed, 29 Jun 2005 15:04:06 +0000 (17:04 +0200)]
[PATCH] PCI: Add PCI quirk for SMBus on the Asus P4B-LX

One more Asus motherboard requiring the SMBus quirk (P4B-LX). Original
patch from Salah Coronya.

Signed-off-by: Salah Coronya <salahx@yahoo.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] PCI: clean up dynamic pci id logic
Greg Kroah-Hartman [Thu, 30 Jun 2005 09:18:12 +0000 (02:18 -0700)]
[PATCH] PCI: clean up dynamic pci id logic

The dynamic pci id logic has been bothering me for a while, and now that
I started to look into how to move some of this to the driver core, I
thought it was time to clean it all up.

It ends up making the code smaller, and easier to follow, and fixes a
few bugs at the same time (dynamic ids were not being matched
everywhere, and so could be missed on some call paths for new devices,
semaphore not needed to be grabbed when adding a new id and calling the
driver core, etc.)

I also renamed the function pci_match_device() to pci_match_id() as
that's what it really does.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] PCI: pci_assign_unassigned_resources() on x86
Ivan Kokshaysky [Wed, 15 Jun 2005 14:59:27 +0000 (18:59 +0400)]
[PATCH] PCI: pci_assign_unassigned_resources() on x86

- Add sanity check for io[port,mem]_resource in setup-bus.c. These
  resources look like "free" as they have no parents, but obviously
  we must not touch them.
- In i386.c:pci_allocate_bus_resources(), if a bridge resource cannot be
  allocated for some reason, then clear its flags. This prevents any child
  allocations in this range, so the setup-bus code will work with a clean
  resource sub-tree.
- i386.c:pcibios_enable_resources() doesn't enable bridges, as it checks
  only resources 0-5, which looks like a clear bug to me. I suspect it
  might break hotplug as well in some cases.

From: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>