Pierre-Louis Bossart [Tue, 30 Apr 2019 15:52:29 +0000 (10:52 -0500)]
ACPI / property: fix handling of data_nodes in acpi_get_next_subnode()
[ Upstream commit
23583f7795025e3c783b680d906509366b0906ad ]
When the DSDT tables expose devices with subdevices and a set of
hierarchical _DSD properties, the data returned by
acpi_get_next_subnode() is incorrect, with the results suggesting a bad
pointer assignment. The parser works fine with device_nodes or
data_nodes, but not with a combination of the two.
The problem is traced to an invalid pointer used when jumping from
handling device_nodes to data nodes. The existing code looks for data
nodes below the last subdevice found instead of the common root. Fix
by forcing the acpi_device pointer to be derived from the same fwnode
for the two types of subnodes.
This same problem of handling device and data nodes was already fixed
in a similar way by 'commit
bf4703fdd166 ("ACPI / property: fix data
node parsing in acpi_get_next_subnode()")' but broken later by 'commit
34055190b19 ("ACPI / property: Add fwnode_get_next_child_node()")', so
this should probably go to linux-stable all the way to 4.12
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Wed, 24 Apr 2019 09:52:18 +0000 (12:52 +0300)]
brcm80211: potential NULL dereference in brcmf_cfg80211_vndr_cmds_dcmd_handler()
[ Upstream commit
e025da3d7aa4770bb1d1b3b0aa7cc4da1744852d ]
If "ret_len" is negative then it could lead to a NULL dereference.
The "ret_len" value comes from nl80211_vendor_cmd(), if it's negative
then we don't allocate the "dcmd_buf" buffer. Then we pass "ret_len" to
brcmf_fil_cmd_data_set() where it is cast to a very high u32 value.
Most of the functions in that call tree check whether the buffer we pass
is NULL but there are at least a couple places which don't such as
brcmf_dbg_hex_dump() and brcmf_msgbuf_query_dcmd(). We memcpy() to and
from the buffer so it would result in a NULL dereference.
The fix is to change the types so that "ret_len" can't be negative. (If
we memcpy() zero bytes to NULL, that's a no-op and doesn't cause an
issue).
Fixes:
1bacb0487d0e ("brcmfmac: replace cfg80211 testmode with vendor command")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Flavio Suligoi [Fri, 12 Apr 2019 07:32:19 +0000 (09:32 +0200)]
spi: pxa2xx: fix SCR (divisor) calculation
[ Upstream commit
29f2133717c527f492933b0622a4aafe0b3cbe9e ]
Calculate the divisor for the SCR (Serial Clock Rate), avoiding
that the SSP transmission rate can be greater than the device rate.
When the division between the SSP clock and the device rate generates
a reminder, we have to increment by one the divisor.
In this way the resulting SSP clock will never be greater than the
device SPI max frequency.
For example, with:
- ssp_clk = 50 MHz
- dev freq = 15 MHz
without this patch the SSP clock will be greater than 15 MHz:
- 25 MHz for PXA25x_SSP and CE4100_SSP
- 16,56 MHz for the others
Instead, with this patch, we have in both case an SSP clock of 12.5MHz,
so the max rate of the SPI device clock is respected.
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Tue, 16 Apr 2019 13:12:23 +0000 (15:12 +0200)]
ASoC: imx: fix fiq dependencies
[ Upstream commit
ea751227c813ab833609afecfeedaf0aa26f327e ]
During randconfig builds, I occasionally run into an invalid configuration
of the freescale FIQ sound support:
WARNING: unmet direct dependencies detected for SND_SOC_IMX_PCM_FIQ
Depends on [m]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_IMX_SOC [=m]
Selected by [y]:
- SND_SOC_FSL_SPDIF [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_IMX_SOC [=m]!=n && (MXC_TZIC [=n] || MXC_AVIC [=y])
sound/soc/fsl/imx-ssi.o: In function `imx_ssi_remove':
imx-ssi.c:(.text+0x28): undefined reference to `imx_pcm_fiq_exit'
sound/soc/fsl/imx-ssi.o: In function `imx_ssi_probe':
imx-ssi.c:(.text+0xa64): undefined reference to `imx_pcm_fiq_init'
The Kconfig warning is a result of the symbol being defined inside of
the "if SND_IMX_SOC" block, and is otherwise harmless. The link error
is more tricky and happens with SND_SOC_IMX_SSI=y, which may or may not
imply FIQ support. However, if SND_SOC_FSL_SSI is set to =m at the same
time, that selects SND_SOC_IMX_PCM_FIQ as a loadable module dependency,
which then causes a link failure from imx-ssi.
The solution here is to make SND_SOC_IMX_PCM_FIQ built-in whenever
one of its potential users is built-in.
Fixes:
ff40260f79dc ("ASoC: fsl: refine DMA/FIQ dependencies")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anju T Sudhakar [Tue, 18 Dec 2018 06:20:41 +0000 (11:50 +0530)]
powerpc/perf: Fix loop exit condition in nest_imc_event_init
[ Upstream commit
860b7d2286236170a36f94946d03ca9888d32571 ]
The data structure (i.e struct imc_mem_info) to hold the memory address
information for nest imc units is allocated based on the number of nodes
in the system.
nest_imc_event_init() traverse this struct array to calculate the memory
base address for the event-cpu. If we fail to find a match for the event
cpu's chip-id in imc_mem_info struct array, then the do-while loop will
iterate until we crash.
Fix this by changing the loop exit condition based on the number of
non zero vbase elements in the array, since the allocation is done for
nr_chips + 1.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes:
885dcd709ba91 ("powerpc/perf: Add nest IMC PMU support")
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bo YU [Tue, 30 Oct 2018 13:21:55 +0000 (09:21 -0400)]
powerpc/boot: Fix missing check of lseek() return value
[ Upstream commit
5d085ec04a000fefb5182d3b03ee46ca96d8389b ]
This is detected by Coverity scan: CID: 1440481
Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anju T Sudhakar [Tue, 27 Nov 2018 08:24:52 +0000 (13:54 +0530)]
powerpc/perf: Return accordingly on invalid chip-id in
[ Upstream commit
a913e5e8b43be1d3897a141ce61c1ec071cad89c ]
Nest hardware counter memory resides in a per-chip reserve-memory.
During nest_imc_event_init(), chip-id of the event-cpu is considered to
calculate the base memory addresss for that cpu. Return, proper error
condition if the chip_id calculated is invalid.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes:
885dcd709ba91 ("powerpc/perf: Add nest IMC PMU support")
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jerome Brunet [Mon, 29 Apr 2019 13:29:39 +0000 (15:29 +0200)]
ASoC: hdmi-codec: unlock the device on startup errors
[ Upstream commit
30180e8436046344b12813dc954b2e01dfdcd22d ]
If the hdmi codec startup fails, it should clear the current_substream
pointer to free the device. This is properly done for the audio_startup()
callback but for snd_pcm_hw_constraint_eld().
Make sure the pointer cleared if an error is reported.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Szyprowski [Wed, 27 Mar 2019 09:56:08 +0000 (10:56 +0100)]
usb: dwc3: move synchronize_irq() out of the spinlock protected block
[ Upstream commit
41a91c606e7d2b74358a944525267cc451c271e8 ]
dwc3_gadget_suspend() is called under dwc->lock spinlock. In such context
calling synchronize_irq() is not allowed. Move the problematic call out
of the protected block to fix the following kernel BUG during system
suspend:
BUG: sleeping function called from invalid context at kernel/irq/manage.c:112
in_atomic(): 1, irqs_disabled(): 128, pid: 1601, name: rtcwake
6 locks held by rtcwake/1601:
#0:
f70ac2a2 (sb_writers#7){.+.+}, at: vfs_write+0x130/0x16c
#1:
b5fe1270 (&of->mutex){+.+.}, at: kernfs_fop_write+0xc0/0x1e4
#2:
7e597705 (kn->count#60){.+.+}, at: kernfs_fop_write+0xc8/0x1e4
#3:
8b3527d0 (system_transition_mutex){+.+.}, at: pm_suspend+0xc4/0xc04
#4:
fc7f1c42 (&dev->mutex){....}, at: __device_suspend+0xd8/0x74c
#5:
4b36507e (&(&dwc->lock)->rlock){....}, at: dwc3_gadget_suspend+0x24/0x3c
irq event stamp: 11252
hardirqs last enabled at (11251): [<
c09c54a4>] _raw_spin_unlock_irqrestore+0x6c/0x74
hardirqs last disabled at (11252): [<
c09c4d44>] _raw_spin_lock_irqsave+0x1c/0x5c
softirqs last enabled at (9744): [<
c0102564>] __do_softirq+0x3a4/0x66c
softirqs last disabled at (9737): [<
c0128528>] irq_exit+0x140/0x168
Preemption disabled at:
[<
00000000>] (null)
CPU: 7 PID: 1601 Comm: rtcwake Not tainted
5.0.0-rc3-next-
20190122-00039-ga3f4ee4f8a52 #5252
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<
c01110f0>] (unwind_backtrace) from [<
c010d120>] (show_stack+0x10/0x14)
[<
c010d120>] (show_stack) from [<
c09a4d04>] (dump_stack+0x90/0xc8)
[<
c09a4d04>] (dump_stack) from [<
c014c700>] (___might_sleep+0x22c/0x2c8)
[<
c014c700>] (___might_sleep) from [<
c0189d68>] (synchronize_irq+0x28/0x84)
[<
c0189d68>] (synchronize_irq) from [<
c05cbbf8>] (dwc3_gadget_suspend+0x34/0x3c)
[<
c05cbbf8>] (dwc3_gadget_suspend) from [<
c05bd020>] (dwc3_suspend_common+0x154/0x410)
[<
c05bd020>] (dwc3_suspend_common) from [<
c05bd34c>] (dwc3_suspend+0x14/0x2c)
[<
c05bd34c>] (dwc3_suspend) from [<
c051c730>] (platform_pm_suspend+0x2c/0x54)
[<
c051c730>] (platform_pm_suspend) from [<
c05285d4>] (dpm_run_callback+0xa4/0x3dc)
[<
c05285d4>] (dpm_run_callback) from [<
c0528a40>] (__device_suspend+0x134/0x74c)
[<
c0528a40>] (__device_suspend) from [<
c052c508>] (dpm_suspend+0x174/0x588)
[<
c052c508>] (dpm_suspend) from [<
c0182134>] (suspend_devices_and_enter+0xc0/0xe74)
[<
c0182134>] (suspend_devices_and_enter) from [<
c0183658>] (pm_suspend+0x770/0xc04)
[<
c0183658>] (pm_suspend) from [<
c0180ddc>] (state_store+0x6c/0xcc)
[<
c0180ddc>] (state_store) from [<
c09a9a70>] (kobj_attr_store+0x14/0x20)
[<
c09a9a70>] (kobj_attr_store) from [<
c02d6800>] (sysfs_kf_write+0x4c/0x50)
[<
c02d6800>] (sysfs_kf_write) from [<
c02d594c>] (kernfs_fop_write+0xfc/0x1e4)
[<
c02d594c>] (kernfs_fop_write) from [<
c02593d8>] (__vfs_write+0x2c/0x160)
[<
c02593d8>] (__vfs_write) from [<
c0259694>] (vfs_write+0xa4/0x16c)
[<
c0259694>] (vfs_write) from [<
c0259870>] (ksys_write+0x40/0x8c)
[<
c0259870>] (ksys_write) from [<
c0101000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xed55ffa8 to 0xed55fff0)
...
Fixes:
01c10880d242 ("usb: dwc3: gadget: synchronize_irq dwc irq in suspend")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Minas Harutyunyan [Mon, 18 Mar 2019 10:24:30 +0000 (14:24 +0400)]
usb: dwc2: gadget: Increase descriptors count for ISOC's
[ Upstream commit
54f37f56631747075f1f9a2f0edf6ba405e3e66c ]
Some function drivers queueing more than 128 ISOC requests at a time.
To avoid "descriptor chain full" cases, increasing descriptors count
from MAX_DMA_DESC_NUM_GENERIC to MAX_DMA_DESC_NUM_HS_ISOC for ISOC's
only.
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mac Chiang [Thu, 2 May 2019 06:12:04 +0000 (14:12 +0800)]
ASoC: Intel: kbl_da7219_max98357a: Map BTN_0 to KEY_PLAYPAUSE
[ Upstream commit
16ec5dfe0327ddcf279957bffe4c8fe527088c63 ]
On kbl_rt5663_max98927, commit
38a5882e4292
("ASoC: Intel: kbl_rt5663_max98927: Map BTN_0 to KEY_PLAYPAUSE")
This key pair mapping to play/pause when playing Youtube
The Android 3.5mm Headset jack specification mentions that BTN_0 should
be mapped to KEY_MEDIA, but this is less logical than KEY_PLAYPAUSE,
which has much broader userspace support.
For example, the Chrome OS userspace now supports KEY_PLAYPAUSE to toggle
play/pause of videos and audio, but does not handle KEY_MEDIA.
Furthermore, Android itself now supports KEY_PLAYPAUSE equivalently, as the
new USB headset spec requires KEY_PLAYPAUSE for BTN_0.
https://source.android.com/devices/accessories/headset/usb-headset-spec
The same fix is required on Chrome kbl_da7219_max98357a.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wen Yang [Fri, 12 Apr 2019 06:02:23 +0000 (14:02 +0800)]
pinctrl: zte: fix leaked of_node references
[ Upstream commit
02d15f0d80720545f1f4922a1550ea4aaad4e152 ]
The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./drivers/pinctrl/zte/pinctrl-zx.c:415:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function.
./drivers/pinctrl/zte/pinctrl-zx.c:422:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function.
./drivers/pinctrl/zte/pinctrl-zx.c:436:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function.
./drivers/pinctrl/zte/pinctrl-zx.c:444:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function.
./drivers/pinctrl/zte/pinctrl-zx.c:448:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
João Paulo Rechi Vita [Thu, 2 May 2019 02:01:52 +0000 (10:01 +0800)]
Bluetooth: Ignore CC events not matching the last HCI command
[ Upstream commit
f80c5dad7b6467b884c445ffea45985793b4b2d0 ]
This commit makes the kernel not send the next queued HCI command until
a command complete arrives for the last HCI command sent to the
controller. This change avoids a problem with some buggy controllers
(seen on two SKUs of QCA9377) that send an extra command complete event
for the previous command after the kernel had already sent a new HCI
command to the controller.
The problem was reproduced when starting an active scanning procedure,
where an extra command complete event arrives for the LE_SET_RANDOM_ADDR
command. When this happends the kernel ends up not processing the
command complete for the following commmand, LE_SET_SCAN_PARAM, and
ultimately behaving as if a passive scanning procedure was being
performed, when in fact controller is performing an active scanning
procedure. This makes it impossible to discover BLE devices as no device
found events are sent to userspace.
This problem is reproducible on 100% of the attempts on the affected
controllers. The extra command complete event can be seen at timestamp
27.420131 on the btmon logs bellow.
Bluetooth monitor ver 5.50
= Note: Linux version 5.0.0+ (x86_64) 0.352340
= Note: Bluetooth subsystem version 2.22 0.352343
= New Index: 80:C5:F2:8F:87:84 (Primary,USB,hci0) [hci0] 0.352344
= Open Index: 80:C5:F2:8F:87:84 [hci0] 0.352345
= Index Info: 80:C5:F2:8F:87:84 (Qualcomm) [hci0] 0.352346
@ MGMT Open: bluetoothd (privileged) version 1.14 {0x0001} 0.352347
@ MGMT Open: btmon (privileged) version 1.14 {0x0002} 0.352366
@ MGMT Open: btmgmt (privileged) version 1.14 {0x0003} 27.302164
@ MGMT Command: Start Discovery (0x0023) plen 1 {0x0003} [hci0] 27.302310
Address type: 0x06
LE Public
LE Random
< HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #1 [hci0] 27.302496
Address: 15:60:F2:91:B2:24 (Non-Resolvable)
> HCI Event: Command Complete (0x0e) plen 4 #2 [hci0] 27.419117
LE Set Random Address (0x08|0x0005) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #3 [hci0] 27.419244
Type: Active (0x01)
Interval: 11.250 msec (0x0012)
Window: 11.250 msec (0x0012)
Own address type: Random (0x01)
Filter policy: Accept all advertisement (0x00)
> HCI Event: Command Complete (0x0e) plen 4 #4 [hci0] 27.420131
LE Set Random Address (0x08|0x0005) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #5 [hci0] 27.420259
Scanning: Enabled (0x01)
Filter duplicates: Enabled (0x01)
> HCI Event: Command Complete (0x0e) plen 4 #6 [hci0] 27.420969
LE Set Scan Parameters (0x08|0x000b) ncmd 1
Status: Success (0x00)
> HCI Event: Command Complete (0x0e) plen 4 #7 [hci0] 27.421983
LE Set Scan Enable (0x08|0x000c) ncmd 1
Status: Success (0x00)
@ MGMT Event: Command Complete (0x0001) plen 4 {0x0003} [hci0] 27.422059
Start Discovery (0x0023) plen 1
Status: Success (0x00)
Address type: 0x06
LE Public
LE Random
@ MGMT Event: Discovering (0x0013) plen 2 {0x0003} [hci0] 27.422067
Address type: 0x06
LE Public
LE Random
Discovery: Enabled (0x01)
@ MGMT Event: Discovering (0x0013) plen 2 {0x0002} [hci0] 27.422067
Address type: 0x06
LE Public
LE Random
Discovery: Enabled (0x01)
@ MGMT Event: Discovering (0x0013) plen 2 {0x0001} [hci0] 27.422067
Address type: 0x06
LE Public
LE Random
Discovery: Enabled (0x01)
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Haiyang Zhang [Tue, 30 Apr 2019 19:29:07 +0000 (19:29 +0000)]
hv_netvsc: fix race that may miss tx queue wakeup
[ Upstream commit
93aa4792c3908eac87ddd368ee0fe0564148232b ]
When the ring buffer is almost full due to RX completion messages, a
TX packet may reach the "low watermark" and cause the queue stopped.
If the TX completion arrives earlier than queue stopping, the wakeup
may be missed.
This patch moves the check for the last pending packet to cover both
EAGAIN and success cases, so the queue will be reliably waked up when
necessary.
Reported-and-tested-by: Stephan Klein <stephan.klein@wegfinder.at>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sameeh Jubran [Wed, 1 May 2019 13:47:10 +0000 (16:47 +0300)]
net: ena: gcc 8: fix compilation warning
[ Upstream commit
f913308879bc6ae437ce64d878c7b05643ddea44 ]
GCC 8 contains a number of new warnings as well as enhancements to existing
checkers. The warning - Wstringop-truncation - warns for calls to bounded
string manipulation functions such as strncat, strncpy, and stpncpy that
may either truncate the copied string or leave the destination unchanged.
In our case the destination string length (32 bytes) is much shorter than
the source string (64 bytes) which causes this warning to show up. In
general the destination has to be at least a byte larger than the length
of the source string with strncpy for this warning not to showup.
This can be easily fixed by using strlcpy instead which already does the
truncation to the string. Documentation for this function can be
found here:
https://elixir.bootlin.com/linux/latest/source/lib/string.c#L141
Fixes:
1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sameer Pujar [Thu, 2 May 2019 12:55:16 +0000 (18:25 +0530)]
dmaengine: tegra210-dma: free dma controller in remove()
[ Upstream commit
f030e419501cb95e961e9ed35c493b5d46a04eca ]
Following kernel panic is seen during DMA driver unload->load sequence
==========================================================================
Unable to handle kernel paging request at virtual address
ffffff8001198880
Internal error: Oops:
86000007 [#1] PREEMPT SMP
CPU: 0 PID: 5907 Comm: HwBinder:4123_1 Tainted: G C 4.9.128-tegra-g065839f
Hardware name: galen (DT)
task:
ffffffc3590d1a80 task.stack:
ffffffc3d0678000
PC is at 0xffffff8001198880
LR is at of_dma_request_slave_channel+0xd8/0x1f8
pc : [<
ffffff8001198880>] lr : [<
ffffff8008746f30>] pstate:
60400045
sp :
ffffffc3d067b710
x29:
ffffffc3d067b710 x28:
000000000000002f
x27:
ffffff800949e000 x26:
ffffff800949e750
x25:
ffffff800949e000 x24:
ffffffbefe817d84
x23:
ffffff8009f77cb0 x22:
0000000000000028
x21:
ffffffc3ffda49c8 x20:
0000000000000029
x19:
0000000000000001 x18:
ffffffffffffffff
x17:
0000000000000000 x16:
ffffff80082b66a0
x15:
ffffff8009e78250 x14:
000000000000000a
x13:
0000000000000038 x12:
0101010101010101
x11:
0000000000000030 x10:
0101010101010101
x9 :
fffffffffffffffc x8 :
7f7f7f7f7f7f7f7f
x7 :
62ff726b6b64622c x6 :
0000000000008064
x5 :
6400000000000000 x4 :
ffffffbefe817c44
x3 :
ffffffc3ffda3e08 x2 :
ffffff8001198880
x1 :
ffffffc3d48323c0 x0 :
ffffffc3d067b788
Process HwBinder:4123_1 (pid: 5907, stack limit = 0xffffffc3d0678028)
Call trace:
[<
ffffff8001198880>] 0xffffff8001198880
[<
ffffff80087459f8>] dma_request_chan+0x50/0x1f0
[<
ffffff8008745bc0>] dma_request_slave_channel+0x28/0x40
[<
ffffff8001552c44>] tegra_alt_pcm_open+0x114/0x170
[<
ffffff8008d65fa4>] soc_pcm_open+0x10c/0x878
[<
ffffff8008d18618>] snd_pcm_open_substream+0xc0/0x170
[<
ffffff8008d1878c>] snd_pcm_open+0xc4/0x240
[<
ffffff8008d189e0>] snd_pcm_playback_open+0x58/0x80
[<
ffffff8008cfc6d4>] snd_open+0xb4/0x178
[<
ffffff8008250628>] chrdev_open+0xb8/0x1d0
[<
ffffff8008246fdc>] do_dentry_open+0x214/0x318
[<
ffffff80082485d0>] vfs_open+0x58/0x88
[<
ffffff800825bce0>] do_last+0x450/0xde0
[<
ffffff800825c718>] path_openat+0xa8/0x368
[<
ffffff800825dd84>] do_filp_open+0x8c/0x110
[<
ffffff8008248a74>] do_sys_open+0x164/0x220
[<
ffffff80082b66dc>] compat_SyS_openat+0x3c/0x50
[<
ffffff8008083040>] el0_svc_naked+0x34/0x38
---[ end trace
67e6d544e65b5145 ]---
Kernel panic - not syncing: Fatal exception
==========================================================================
In device probe(), of_dma_controller_register() registers DMA controller.
But when driver is removed, this is not freed. During driver reload this
results in data abort and kernel panic. Add of_dma_controller_free() in
driver remove path to fix the issue.
Fixes:
f46b195799b5 ("dmaengine: tegra-adma: Add support for Tegra210 ADMA")
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masahiro Yamada [Wed, 1 May 2019 13:45:59 +0000 (22:45 +0900)]
bpftool: exclude bash-completion/bpftool from .gitignore pattern
[ Upstream commit
a7d006714724de4334c5e3548701b33f7b12ca96 ]
tools/bpf/bpftool/.gitignore has the "bpftool" pattern, which is
intended to ignore the following build artifact:
tools/bpf/bpftool/bpftool
However, the .gitignore entry is effective not only for the current
directory, but also for any sub-directories.
So, from the point of .gitignore grammar, the following check-in file
is also considered to be ignored:
tools/bpf/bpftool/bash-completion/bpftool
As the manual gitignore(5) says "Files already tracked by Git are not
affected", this is not a problem as far as Git is concerned.
However, Git is not the only program that parses .gitignore because
.gitignore is useful to distinguish build artifacts from source files.
For example, tar(1) supports the --exclude-vcs-ignore option. As of
writing, this option does not work perfectly, but it intends to create
a tarball excluding files specified by .gitignore.
So, I believe it is better to fix this issue.
You can fix it by prefixing the pattern with a slash; the leading slash
means the specified pattern is relative to the current directory.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yonghong Song [Mon, 29 Apr 2019 23:59:38 +0000 (16:59 -0700)]
selftests/bpf: set RLIMIT_MEMLOCK properly for test_libbpf_open.c
[ Upstream commit
6cea33701eb024bc6c920ab83940ee22afd29139 ]
Test test_libbpf.sh failed on my development server with failure
-bash-4.4$ sudo ./test_libbpf.sh
[0] libbpf: Error in bpf_object__probe_name():Operation not permitted(1).
Couldn't load basic 'r0 = 0' BPF program.
test_libbpf: failed at file test_l4lb.o
selftests: test_libbpf [FAILED]
-bash-4.4$
The reason is because my machine has 64KB locked memory by default which
is not enough for this program to get locked memory.
Similar to other bpf selftests, let us increase RLIMIT_MEMLOCK
to infinity, which fixed the issue.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vineet Gupta [Thu, 2 May 2019 15:56:50 +0000 (08:56 -0700)]
tools/bpf: fix perf build error with uClibc (seen on ARC)
[ Upstream commit
ca31ca8247e2d3807ff5fa1d1760616a2292001c ]
When build perf for ARC recently, there was a build failure due to lack
of __NR_bpf.
| Auto-detecting system features:
|
| ... get_cpuid: [ OFF ]
| ... bpf: [ on ]
|
| # error __NR_bpf not defined. libbpf does not support your arch.
^~~~~
| bpf.c: In function 'sys_bpf':
| bpf.c:66:17: error: '__NR_bpf' undeclared (first use in this function)
| return syscall(__NR_bpf, cmd, attr, size);
| ^~~~~~~~
| sys_bpf
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Raul E Rangel [Mon, 29 Apr 2019 17:32:39 +0000 (11:32 -0600)]
mmc: core: Verify SD bus width
[ Upstream commit
9e4be8d03f50d1b25c38e2b59e73b194c130df7d ]
The SD Physical Layer Spec says the following: Since the SD Memory Card
shall support at least the two bus modes 1-bit or 4-bit width, then any SD
Card shall set at least bits 0 and 2 (SD_BUS_WIDTH="0101").
This change verifies the card has specified a bus width.
AMD SDHC Device 7806 can get into a bad state after a card disconnect
where anything transferred via the DATA lines will always result in a
zero filled buffer. Currently the driver will continue without error if
the HC is in this condition. A block device will be created, but reading
from it will result in a zero buffer. This makes it seem like the SD
device has been erased, when in actuality the data is never getting
copied from the DATA lines to the data buffer.
SCR is the first command in the SD initialization sequence that uses the
DATA lines. By checking that the response was invalid, we can abort
mounting the card.
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andreas Gruenbacher [Thu, 4 Apr 2019 20:11:11 +0000 (21:11 +0100)]
gfs2: Fix occasional glock use-after-free
[ Upstream commit
9287c6452d2b1f24ea8e84bd3cf6f3c6f267f712 ]
This patch has to do with the life cycle of glocks and buffers. When
gfs2 metadata or journaled data is queued to be written, a gfs2_bufdata
object is assigned to track the buffer, and that is queued to various
lists, including the glock's gl_ail_list to indicate it's on the active
items list. Once the page associated with the buffer has been written,
it is removed from the ail list, but its life isn't over until a revoke
has been successfully written.
So after the block is written, its bufdata object is moved from the
glock's gl_ail_list to a file-system-wide list of pending revokes,
sd_log_le_revoke. At that point the glock still needs to track how many
revokes it contributed to that list (in gl_revokes) so that things like
glock go_sync can ensure all the metadata has been not only written, but
also revoked before the glock is granted to a different node. This is
to guarantee journal replay doesn't replay the block once the glock has
been granted to another node.
Ross Lagerwall recently discovered a race in which an inode could be
evicted, and its glock freed after its ail list had been synced, but
while it still had unwritten revokes on the sd_log_le_revoke list. The
evict decremented the glock reference count to zero, which allowed the
glock to be freed. After the revoke was written, function
revoke_lo_after_commit tried to adjust the glock's gl_revokes counter
and clear its GLF_LFLUSH flag, at which time it referenced the freed
glock.
This patch fixes the problem by incrementing the glock reference count
in gfs2_add_revoke when the glock's first bufdata object is moved from
the glock to the global revokes list. Later, when the glock's last such
bufdata object is freed, the reference count is decremented. This
guarantees that whichever process finishes last (the revoke writing or
the evict) will properly free the glock, and neither will reference the
glock after it has been freed.
Reported-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mike Marciniszyn [Mon, 18 Mar 2019 16:55:09 +0000 (09:55 -0700)]
IB/hfi1: Fix WQ_MEM_RECLAIM warning
[ Upstream commit
4c4b1996b5db688e2dcb8242b0a3bf7b1e845e42 ]
The work_item cancels that occur when a QP is destroyed can elicit the
following trace:
workqueue: WQ_MEM_RECLAIM ipoib_wq:ipoib_cm_tx_reap [ib_ipoib] is flushing !WQ_MEM_RECLAIM hfi0_0:_hfi1_do_send [hfi1]
WARNING: CPU: 7 PID: 1403 at kernel/workqueue.c:2486 check_flush_dependency+0xb1/0x100
Call Trace:
__flush_work.isra.29+0x8c/0x1a0
? __switch_to_asm+0x40/0x70
__cancel_work_timer+0x103/0x190
? schedule+0x32/0x80
iowait_cancel_work+0x15/0x30 [hfi1]
rvt_reset_qp+0x1f8/0x3e0 [rdmavt]
rvt_destroy_qp+0x65/0x1f0 [rdmavt]
? _cond_resched+0x15/0x30
ib_destroy_qp+0xe9/0x230 [ib_core]
ipoib_cm_tx_reap+0x21c/0x560 [ib_ipoib]
process_one_work+0x171/0x370
worker_thread+0x49/0x3f0
kthread+0xf8/0x130
? max_active_store+0x80/0x80
? kthread_bind+0x10/0x10
ret_from_fork+0x35/0x40
Since QP destruction frees memory, hfi1_wq should have the WQ_MEM_RECLAIM.
The hfi1_wq does not allocate memory with GFP_KERNEL or otherwise become
entangled with memory reclaim, so this flag is appropriate.
Fixes:
0a226edd203f ("staging/rdma/hfi1: Use parallel workqueue for SDMA engines")
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Roberto Bergantinos Corpas [Thu, 25 Apr 2019 13:36:51 +0000 (15:36 +0200)]
NFS: make nfs_match_client killable
[ Upstream commit
950a578c6128c2886e295b9c7ecb0b6b22fcc92b ]
Actually we don't do anything with return value from
nfs_wait_client_init_complete in nfs_match_client, as a
consequence if we get a fatal signal and client is not
fully initialised, we'll loop to "again" label
This has been proven to cause soft lockups on some scenarios
(no-carrier but configured network interfaces)
Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
YueHaibing [Mon, 6 May 2019 15:57:54 +0000 (23:57 +0800)]
cxgb4: Fix error path in cxgb4_init_module
[ Upstream commit
a3147770bea76c8dbad73eca3a24c2118da5e719 ]
BUG: unable to handle kernel paging request at
ffffffffa016a270
PGD 3270067 P4D 3270067 PUD 3271063 PMD
230bbd067 PTE 0
Oops: 0000 [#1
CPU: 0 PID: 6134 Comm: modprobe Not tainted 5.1.0+ #33
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:atomic_notifier_chain_register+0x24/0x60
Code: 1f 80 00 00 00 00 55 48 89 e5 41 54 49 89 f4 53 48 89 fb e8 ae b4 38 01 48 8b 53 38 48 8d 4b 38 48 85 d2 74 20 45 8b 44 24 10 <44> 3b 42 10 7e 08 eb 13 44 39 42 10 7c 0d 48 8d 4a 08 48 8b 52 08
RSP: 0018:
ffffc90000e2bc60 EFLAGS:
00010086
RAX:
0000000000000292 RBX:
ffffffff83467240 RCX:
ffffffff83467278
RDX:
ffffffffa016a260 RSI:
ffffffff83752140 RDI:
ffffffff83467240
RBP:
ffffc90000e2bc70 R08:
0000000000000000 R09:
0000000000000001
R10:
0000000000000000 R11:
00000000014fa61f R12:
ffffffffa01c8260
R13:
ffff888231091e00 R14:
0000000000000000 R15:
ffffc90000e2be78
FS:
00007fbd8d7cd540(0000) GS:
ffff888237a00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffffffffa016a270 CR3:
000000022c7e3000 CR4:
00000000000006f0
Call Trace:
register_inet6addr_notifier+0x13/0x20
cxgb4_init_module+0x6c/0x1000 [cxgb4
? 0xffffffffa01d7000
do_one_initcall+0x6c/0x3cc
? do_init_module+0x22/0x1f1
? rcu_read_lock_sched_held+0x97/0xb0
? kmem_cache_alloc_trace+0x325/0x3b0
do_init_module+0x5b/0x1f1
load_module+0x1db1/0x2690
? m_show+0x1d0/0x1d0
__do_sys_finit_module+0xc5/0xd0
__x64_sys_finit_module+0x15/0x20
do_syscall_64+0x6b/0x1d0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
If pci_register_driver fails, register inet6addr_notifier is
pointless. This patch fix the error path in cxgb4_init_module.
Fixes:
b5a02f503caa ("cxgb4 : Update ipv6 address handling api")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ross Lagerwall [Wed, 27 Mar 2019 17:09:17 +0000 (17:09 +0000)]
gfs2: Fix lru_count going negative
[ Upstream commit
7881ef3f33bb80f459ea6020d1e021fc524a6348 ]
Under certain conditions, lru_count may drop below zero resulting in
a large amount of log spam like this:
vmscan: shrink_slab: gfs2_dump_glock+0x3b0/0x630 [gfs2] \
negative objects to delete nr=-1
This happens as follows:
1) A glock is moved from lru_list to the dispose list and lru_count is
decremented.
2) The dispose function calls cond_resched() and drops the lru lock.
3) Another thread takes the lru lock and tries to add the same glock to
lru_list, checking if the glock is on an lru list.
4) It is on a list (actually the dispose list) and so it avoids
incrementing lru_count.
5) The glock is moved to lru_list.
5) The original thread doesn't dispose it because it has been re-added
to the lru list but the lru_count has still decreased by one.
Fix by checking if the LRU flag is set on the glock rather than checking
if the glock is on some list and rearrange the code so that the LRU flag
is added/removed precisely when the glock is added/removed from lru_list.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Sterba [Wed, 29 May 2019 17:25:44 +0000 (19:25 +0200)]
Revert "btrfs: Honour FITRIM range constraints during free space trim"
This reverts commit
8b13bb911f0c0c77d41e5ddc41ad3c127c356b8a.
There is currently no corresponding patch in master due to additional
changes that would be significantly different from plain revert in the
respective stable branch.
The range argument was not handled correctly and could cause trim to
overlap allocated areas or reach beyond the end of the device. The
address space that fitrim normally operates on is in logical
coordinates, while the discards are done on the physical device extents.
This distinction cannot be made with the current ioctl interface and
caused the confusion.
The bug depends on the layout of block groups and does not always
happen. The whole-fs trim (run by default by the fstrim tool) is not
affected.
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Fri, 5 Apr 2019 01:04:13 +0000 (21:04 -0400)]
acct_on(): don't mess with freeze protection
commit
9419a3191dcb27f24478d288abaab697228d28e6 upstream.
What happens there is that we are replacing file->path.mnt of
a file we'd just opened with a clone and we need the write
count contribution to be transferred from original mount to
new one. That's it. We do *NOT* want any kind of freeze
protection for the duration of switchover.
IOW, we should just use __mnt_{want,drop}_write() for that
switchover; no need to bother with mnt_{want,drop}_write()
there.
Tested-by: Amir Goldstein <amir73il@gmail.com>
Reported-by: syzbot+2a73a6ea9507b7112141@syzkaller.appspotmail.com
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
YueHaibing [Mon, 8 Apr 2019 03:45:29 +0000 (11:45 +0800)]
at76c50x-usb: Don't register led_trigger if usb_register_driver failed
commit
09ac2694b0475f96be895848687ebcbba97eeecf upstream.
Syzkaller report this:
[ 1213.468581] BUG: unable to handle kernel paging request at
fffffbfff83bf338
[ 1213.469530] #PF error: [normal kernel read fault]
[ 1213.469530] PGD
237fe4067 P4D
237fe4067 PUD
237e60067 PMD
1c868b067 PTE 0
[ 1213.473514] Oops: 0000 [#1] SMP KASAN PTI
[ 1213.473514] CPU: 0 PID: 6321 Comm: syz-executor.0 Tainted: G C 5.1.0-rc3+ #8
[ 1213.473514] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 1213.473514] RIP: 0010:strcmp+0x31/0xa0
[ 1213.473514] Code: 00 00 00 00 fc ff df 55 53 48 83 ec 08 eb 0a 84 db 48 89 ef 74 5a 4c 89 e6 48 89 f8 48 89 fa 48 8d 6f 01 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 04 84 c0 75 50 48 89 f0 48 89 f2 0f b6 5d
[ 1213.473514] RSP: 0018:
ffff8881f2b7f950 EFLAGS:
00010246
[ 1213.473514] RAX:
1ffffffff83bf338 RBX:
ffff8881ea6f7240 RCX:
ffffffff825350c6
[ 1213.473514] RDX:
0000000000000000 RSI:
ffffffffc1ee19c0 RDI:
ffffffffc1df99c0
[ 1213.473514] RBP:
ffffffffc1df99c1 R08:
0000000000000001 R09:
0000000000000004
[ 1213.473514] R10:
0000000000000000 R11:
ffff8881de353f00 R12:
ffff8881ee727900
[ 1213.473514] R13:
dffffc0000000000 R14:
0000000000000001 R15:
ffffffffc1eeaaf0
[ 1213.473514] FS:
00007fa66fa01700(0000) GS:
ffff8881f7200000(0000) knlGS:
0000000000000000
[ 1213.473514] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 1213.473514] CR2:
fffffbfff83bf338 CR3:
00000001ebb9e005 CR4:
00000000007606f0
[ 1213.473514] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 1213.473514] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 1213.473514] PKRU:
55555554
[ 1213.473514] Call Trace:
[ 1213.473514] led_trigger_register+0x112/0x3f0
[ 1213.473514] led_trigger_register_simple+0x7a/0x110
[ 1213.473514] ? 0xffffffffc1c10000
[ 1213.473514] at76_mod_init+0x77/0x1000 [at76c50x_usb]
[ 1213.473514] do_one_initcall+0xbc/0x47d
[ 1213.473514] ? perf_trace_initcall_level+0x3a0/0x3a0
[ 1213.473514] ? kasan_unpoison_shadow+0x30/0x40
[ 1213.473514] ? kasan_unpoison_shadow+0x30/0x40
[ 1213.473514] do_init_module+0x1b5/0x547
[ 1213.473514] load_module+0x6405/0x8c10
[ 1213.473514] ? module_frob_arch_sections+0x20/0x20
[ 1213.473514] ? kernel_read_file+0x1e6/0x5d0
[ 1213.473514] ? find_held_lock+0x32/0x1c0
[ 1213.473514] ? cap_capable+0x1ae/0x210
[ 1213.473514] ? __do_sys_finit_module+0x162/0x190
[ 1213.473514] __do_sys_finit_module+0x162/0x190
[ 1213.473514] ? __ia32_sys_init_module+0xa0/0xa0
[ 1213.473514] ? __mutex_unlock_slowpath+0xdc/0x690
[ 1213.473514] ? wait_for_completion+0x370/0x370
[ 1213.473514] ? vfs_write+0x204/0x4a0
[ 1213.473514] ? do_syscall_64+0x18/0x450
[ 1213.473514] do_syscall_64+0x9f/0x450
[ 1213.473514] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1213.473514] RIP: 0033:0x462e99
[ 1213.473514] Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
[ 1213.473514] RSP: 002b:
00007fa66fa00c58 EFLAGS:
00000246 ORIG_RAX:
0000000000000139
[ 1213.473514] RAX:
ffffffffffffffda RBX:
000000000073bf00 RCX:
0000000000462e99
[ 1213.473514] RDX:
0000000000000000 RSI:
0000000020000300 RDI:
0000000000000003
[ 1213.473514] RBP:
00007fa66fa00c70 R08:
0000000000000000 R09:
0000000000000000
[ 1213.473514] R10:
0000000000000000 R11:
0000000000000246 R12:
00007fa66fa016bc
[ 1213.473514] R13:
00000000004bcefa R14:
00000000006f6fb0 R15:
0000000000000004
If usb_register failed, no need to call led_trigger_register_simple.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes:
1264b951463a ("at76c50x-usb: add driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Lüssing [Wed, 24 Apr 2019 01:19:14 +0000 (03:19 +0200)]
batman-adv: mcast: fix multicast tt/tvlv worker locking
commit
a3c7cd0cdf1107f891aff847ad481e34df727055 upstream.
Syzbot has reported some issues with the locking assumptions made for
the multicast tt/tvlv worker: It was able to trigger the WARN_ON() in
batadv_mcast_mla_tt_retract() and batadv_mcast_mla_tt_add().
While hard/not reproduceable for us so far it seems that the
delayed_work_pending() we use might not be quite safe from reordering.
Therefore this patch adds an explicit, new spinlock to protect the
update of the mla_list and flags in bat_priv and then removes the
WARN_ON(delayed_work_pending()).
Reported-by: syzbot+83f2d54ec6b7e417e13f@syzkaller.appspotmail.com
Reported-by: syzbot+050927a651272b145a5d@syzkaller.appspotmail.com
Reported-by: syzbot+979ffc89b87309b1b94b@syzkaller.appspotmail.com
Reported-by: syzbot+f9f3f388440283da2965@syzkaller.appspotmail.com
Fixes:
cbebd363b2e9 ("batman-adv: Use own timer for multicast TT and TVLV updates")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Mon, 13 May 2019 16:59:16 +0000 (09:59 -0700)]
bpf: devmap: fix use-after-free Read in __dev_map_entry_free
commit
2baae3545327632167c0180e9ca1d467416f1919 upstream.
synchronize_rcu() is fine when the rcu callbacks only need
to free memory (kfree_rcu() or direct kfree() call rcu call backs)
__dev_map_entry_free() is a bit more complex, so we need to make
sure that call queued __dev_map_entry_free() callbacks have completed.
sysbot report:
BUG: KASAN: use-after-free in dev_map_flush_old kernel/bpf/devmap.c:365
[inline]
BUG: KASAN: use-after-free in __dev_map_entry_free+0x2a8/0x300
kernel/bpf/devmap.c:379
Read of size 8 at addr
ffff8801b8da38c8 by task ksoftirqd/1/18
CPU: 1 PID: 18 Comm: ksoftirqd/1 Not tainted 4.17.0+ #39
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1b9/0x294 lib/dump_stack.c:113
print_address_description+0x6c/0x20b mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
__asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
dev_map_flush_old kernel/bpf/devmap.c:365 [inline]
__dev_map_entry_free+0x2a8/0x300 kernel/bpf/devmap.c:379
__rcu_reclaim kernel/rcu/rcu.h:178 [inline]
rcu_do_batch kernel/rcu/tree.c:2558 [inline]
invoke_rcu_callbacks kernel/rcu/tree.c:2818 [inline]
__rcu_process_callbacks kernel/rcu/tree.c:2785 [inline]
rcu_process_callbacks+0xe9d/0x1760 kernel/rcu/tree.c:2802
__do_softirq+0x2e0/0xaf5 kernel/softirq.c:284
run_ksoftirqd+0x86/0x100 kernel/softirq.c:645
smpboot_thread_fn+0x417/0x870 kernel/smpboot.c:164
kthread+0x345/0x410 kernel/kthread.c:240
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412
Allocated by task 6675:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553
kmem_cache_alloc_trace+0x152/0x780 mm/slab.c:3620
kmalloc include/linux/slab.h:513 [inline]
kzalloc include/linux/slab.h:706 [inline]
dev_map_alloc+0x208/0x7f0 kernel/bpf/devmap.c:102
find_and_alloc_map kernel/bpf/syscall.c:129 [inline]
map_create+0x393/0x1010 kernel/bpf/syscall.c:453
__do_sys_bpf kernel/bpf/syscall.c:2351 [inline]
__se_sys_bpf kernel/bpf/syscall.c:2328 [inline]
__x64_sys_bpf+0x303/0x510 kernel/bpf/syscall.c:2328
do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 26:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
__kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521
kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
__cache_free mm/slab.c:3498 [inline]
kfree+0xd9/0x260 mm/slab.c:3813
dev_map_free+0x4fa/0x670 kernel/bpf/devmap.c:191
bpf_map_free_deferred+0xba/0xf0 kernel/bpf/syscall.c:262
process_one_work+0xc64/0x1b70 kernel/workqueue.c:2153
worker_thread+0x181/0x13a0 kernel/workqueue.c:2296
kthread+0x345/0x410 kernel/kthread.c:240
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412
The buggy address belongs to the object at
ffff8801b8da37c0
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 264 bytes inside of
512-byte region [
ffff8801b8da37c0,
ffff8801b8da39c0)
The buggy address belongs to the page:
page:
ffffea0006e368c0 count:1 mapcount:0 mapping:
ffff8801da800940
index:0xffff8801b8da3540
flags: 0x2fffc0000000100(slab)
raw:
02fffc0000000100 ffffea0007217b88 ffffea0006e30cc8 ffff8801da800940
raw:
ffff8801b8da3540 ffff8801b8da3040 0000000100000004 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8801b8da3780: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
ffff8801b8da3800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>
ffff8801b8da3880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8801b8da3900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8801b8da3980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
Fixes:
546ac1ffb70d ("bpf: add devmap, a map for storing net device references")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+457d3e2ffbcf31aee5c0@syzkaller.appspotmail.com
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
YueHaibing [Wed, 6 Mar 2019 11:56:58 +0000 (19:56 +0800)]
ssb: Fix possible NULL pointer dereference in ssb_host_pcmcia_exit
commit
b2c01aab9646ed8ffb7c549afe55d5349c482425 upstream.
Syzkaller report this:
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 4492 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:sysfs_remove_file_ns+0x27/0x70 fs/sysfs/file.c:468
Code: 00 00 00 41 54 55 48 89 fd 53 49 89 d4 48 89 f3 e8 ee 76 9c ff 48 8d 7d 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 75 2d 48 89 da 48 b8 00 00 00 00 00 fc ff df 48 8b 6d
RSP: 0018:
ffff8881e9d9fc00 EFLAGS:
00010206
RAX:
dffffc0000000000 RBX:
ffffffff900367e0 RCX:
ffffffff81a95952
RDX:
0000000000000006 RSI:
ffffc90001405000 RDI:
0000000000000030
RBP:
0000000000000000 R08:
fffffbfff1fa22ed R09:
fffffbfff1fa22ed
R10:
0000000000000001 R11:
fffffbfff1fa22ec R12:
0000000000000000
R13:
ffffffffc1abdac0 R14:
1ffff1103d3b3f8b R15:
0000000000000000
FS:
00007fe409dc1700(0000) GS:
ffff8881f1200000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000001b2d721000 CR3:
00000001e98b6005 CR4:
00000000007606f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
PKRU:
55555554
Call Trace:
sysfs_remove_file include/linux/sysfs.h:519 [inline]
driver_remove_file+0x40/0x50 drivers/base/driver.c:122
pcmcia_remove_newid_file drivers/pcmcia/ds.c:163 [inline]
pcmcia_unregister_driver+0x7d/0x2b0 drivers/pcmcia/ds.c:209
ssb_modexit+0xa/0x1b [ssb]
__do_sys_delete_module kernel/module.c:1018 [inline]
__se_sys_delete_module kernel/module.c:961 [inline]
__x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007fe409dc0c58 EFLAGS:
00000246 ORIG_RAX:
00000000000000b0
RAX:
ffffffffffffffda RBX:
000000000073bf00 RCX:
0000000000462e99
RDX:
0000000000000000 RSI:
0000000000000000 RDI:
00000000200000c0
RBP:
0000000000000002 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00007fe409dc16bc
R13:
00000000004bccaa R14:
00000000006f6bc8 R15:
00000000ffffffff
Modules linked in: ssb(-) 3c59x nvme_core macvlan tap pata_hpt3x3 rt2x00pci null_blk tsc40 pm_notifier_error_inject notifier_error_inject mdio cdc_wdm nf_reject_ipv4 ath9k_common ath9k_hw ath pppox ppp_generic slhc ehci_platform wl12xx wlcore tps6507x_ts ioc4 nf_synproxy_core ide_gd_mod ax25 can_dev iwlwifi can_raw atm tm2_touchkey can_gw can sundance adp5588_keys rt2800mmio rt2800lib rt2x00mmio rt2x00lib eeprom_93cx6 pn533 lru_cache elants_i2c ip_set nfnetlink gameport tipc hampshire nhc_ipv6 nhc_hop nhc_udp nhc_fragment nhc_routing nhc_mobility nhc_dest 6lowpan silead brcmutil nfc mt76_usb mt76 mac80211 iptable_security iptable_raw iptable_mangle iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_gre sit hsr veth vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon vcan bridge stp llc ip6_gre ip6_tunnel tunnel6 tun joydev mousedev serio_raw ide_pci_generic piix floppy ide_core sch_fq_codel ip_tables x_tables ipv6
[last unloaded: 3c59x]
Dumping ftrace buffer:
(ftrace buffer empty)
---[ end trace
3913cbf8011e1c05 ]---
In ssb_modinit, it does not fail SSB init when ssb_host_pcmcia_init failed,
however in ssb_modexit, ssb_host_pcmcia_exit calls pcmcia_unregister_driver
unconditionally, which may tigger a NULL pointer dereference issue as above.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes:
399500da18f7 ("ssb: pick PCMCIA host code support from b43 driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Potapenko [Thu, 4 Apr 2019 14:56:46 +0000 (10:56 -0400)]
media: vivid: use vfree() instead of kfree() for dev->bitmap_cap
commit
dad7e270ba712ba1c99cd2d91018af6044447a06 upstream.
syzkaller reported crashes on kfree() called from
vivid_vid_cap_s_selection(). This looks like a simple typo, as
dev->bitmap_cap is allocated with vzalloc() throughout the file.
Fixes:
ef834f7836ec0 ("[media] vivid: add the video capture and output
parts")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Syzbot <syzbot+6c0effb5877f6b0344e2@syzkaller.appspotmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans Verkuil [Mon, 19 Nov 2018 11:09:00 +0000 (06:09 -0500)]
media: vb2: add waiting_in_dqbuf flag
commit
d65842f7126aa1a87fb44b7c9980c12630ed4f33 upstream.
Calling VIDIOC_DQBUF can release the core serialization lock pointed to
by vb2_queue->lock if it has to wait for a new buffer to arrive.
However, if userspace dup()ped the video device filehandle, then it is
possible to read or call DQBUF from two filehandles at the same time.
It is also possible to call REQBUFS from one filehandle while the other
is waiting for a buffer. This will remove all the buffers and reallocate
new ones. Removing all the buffers isn't the problem here (that's already
handled correctly by DQBUF), but the reallocating part is: DQBUF isn't
aware that the buffers have changed.
This is fixed by setting a flag whenever the lock is released while waiting
for a buffer to arrive. And checking the flag where needed so we can return
-EBUSY.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reported-by: Syzbot <syzbot+4180ff9ca6810b06c1e9@syzkaller.appspotmail.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
YueHaibing [Tue, 5 Mar 2019 05:40:26 +0000 (00:40 -0500)]
media: serial_ir: Fix use-after-free in serial_ir_init_module
commit
56cd26b618855c9af48c8301aa6754ced8dd0beb upstream.
Syzkaller report this:
BUG: KASAN: use-after-free in sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468
Read of size 8 at addr
ffff8881dc7ae030 by task syz-executor.0/6249
CPU: 1 PID: 6249 Comm: syz-executor.0 Not tainted 5.0.0-rc8+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xfa/0x1ce lib/dump_stack.c:113
print_address_description+0x65/0x270 mm/kasan/report.c:187
kasan_report+0x149/0x18d mm/kasan/report.c:317
? 0xffffffffc1728000
sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468
sysfs_remove_file include/linux/sysfs.h:519 [inline]
driver_remove_file+0x40/0x50 drivers/base/driver.c:122
remove_bind_files drivers/base/bus.c:585 [inline]
bus_remove_driver+0x186/0x220 drivers/base/bus.c:725
driver_unregister+0x6c/0xa0 drivers/base/driver.c:197
serial_ir_init_module+0x169/0x1000 [serial_ir]
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007f9450132c58 EFLAGS:
00000246 ORIG_RAX:
0000000000000139
RAX:
ffffffffffffffda RBX:
000000000073bf00 RCX:
0000000000462e99
RDX:
0000000000000000 RSI:
0000000020000100 RDI:
0000000000000003
RBP:
00007f9450132c70 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00007f94501336bc
R13:
00000000004bcefa R14:
00000000006f6fb0 R15:
0000000000000004
Allocated by task 6249:
set_track mm/kasan/common.c:85 [inline]
__kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:495
kmalloc include/linux/slab.h:545 [inline]
kzalloc include/linux/slab.h:740 [inline]
bus_add_driver+0xc0/0x610 drivers/base/bus.c:651
driver_register+0x1bb/0x3f0 drivers/base/driver.c:170
serial_ir_init_module+0xe8/0x1000 [serial_ir]
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 6249:
set_track mm/kasan/common.c:85 [inline]
__kasan_slab_free+0x130/0x180 mm/kasan/common.c:457
slab_free_hook mm/slub.c:1430 [inline]
slab_free_freelist_hook mm/slub.c:1457 [inline]
slab_free mm/slub.c:3005 [inline]
kfree+0xe1/0x270 mm/slub.c:3957
kobject_cleanup lib/kobject.c:662 [inline]
kobject_release lib/kobject.c:691 [inline]
kref_put include/linux/kref.h:67 [inline]
kobject_put+0x146/0x240 lib/kobject.c:708
bus_remove_driver+0x10e/0x220 drivers/base/bus.c:732
driver_unregister+0x6c/0xa0 drivers/base/driver.c:197
serial_ir_init_module+0x14c/0x1000 [serial_ir]
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at
ffff8881dc7ae000
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 48 bytes inside of
256-byte region [
ffff8881dc7ae000,
ffff8881dc7ae100)
The buggy address belongs to the page:
page:
ffffea000771eb80 count:1 mapcount:0 mapping:
ffff8881f6c02e00 index:0x0
flags: 0x2fffc0000000200(slab)
raw:
02fffc0000000200 ffffea0007d14800 0000000400000002 ffff8881f6c02e00
raw:
0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881dc7adf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8881dc7adf80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
ffff8881dc7ae000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881dc7ae080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881dc7ae100: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00
There are already cleanup handlings in serial_ir_init error path,
no need to call serial_ir_exit do it again in serial_ir_init_module,
otherwise will trigger a use-after-free issue.
Fixes:
fa5dc29c1fcc ("[media] lirc_serial: move out of staging and rename to serial_ir")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
YueHaibing [Wed, 6 Mar 2019 12:45:08 +0000 (07:45 -0500)]
media: cpia2: Fix use-after-free in cpia2_exit
commit
dea37a97265588da604c6ba80160a287b72c7bfd upstream.
Syzkaller report this:
BUG: KASAN: use-after-free in sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468
Read of size 8 at addr
ffff8881f59a6b70 by task syz-executor.0/8363
CPU: 0 PID: 8363 Comm: syz-executor.0 Not tainted 5.0.0-rc8+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xfa/0x1ce lib/dump_stack.c:113
print_address_description+0x65/0x270 mm/kasan/report.c:187
kasan_report+0x149/0x18d mm/kasan/report.c:317
sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468
sysfs_remove_file include/linux/sysfs.h:519 [inline]
driver_remove_file+0x40/0x50 drivers/base/driver.c:122
usb_remove_newid_files drivers/usb/core/driver.c:212 [inline]
usb_deregister+0x12a/0x3b0 drivers/usb/core/driver.c:1005
cpia2_exit+0xa/0x16 [cpia2]
__do_sys_delete_module kernel/module.c:1018 [inline]
__se_sys_delete_module kernel/module.c:961 [inline]
__x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007f86f3754c58 EFLAGS:
00000246 ORIG_RAX:
00000000000000b0
RAX:
ffffffffffffffda RBX:
000000000073bf00 RCX:
0000000000462e99
RDX:
0000000000000000 RSI:
0000000000000000 RDI:
0000000020000300
RBP:
0000000000000002 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00007f86f37556bc
R13:
00000000004bcca9 R14:
00000000006f6b48 R15:
00000000ffffffff
Allocated by task 8363:
set_track mm/kasan/common.c:85 [inline]
__kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:495
kmalloc include/linux/slab.h:545 [inline]
kzalloc include/linux/slab.h:740 [inline]
bus_add_driver+0xc0/0x610 drivers/base/bus.c:651
driver_register+0x1bb/0x3f0 drivers/base/driver.c:170
usb_register_driver+0x267/0x520 drivers/usb/core/driver.c:965
0xffffffffc1b4817c
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 8363:
set_track mm/kasan/common.c:85 [inline]
__kasan_slab_free+0x130/0x180 mm/kasan/common.c:457
slab_free_hook mm/slub.c:1430 [inline]
slab_free_freelist_hook mm/slub.c:1457 [inline]
slab_free mm/slub.c:3005 [inline]
kfree+0xe1/0x270 mm/slub.c:3957
kobject_cleanup lib/kobject.c:662 [inline]
kobject_release lib/kobject.c:691 [inline]
kref_put include/linux/kref.h:67 [inline]
kobject_put+0x146/0x240 lib/kobject.c:708
bus_remove_driver+0x10e/0x220 drivers/base/bus.c:732
driver_unregister+0x6c/0xa0 drivers/base/driver.c:197
usb_register_driver+0x341/0x520 drivers/usb/core/driver.c:980
0xffffffffc1b4817c
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at
ffff8881f59a6b40
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 48 bytes inside of
256-byte region [
ffff8881f59a6b40,
ffff8881f59a6c40)
The buggy address belongs to the page:
page:
ffffea0007d66980 count:1 mapcount:0 mapping:
ffff8881f6c02e00 index:0x0
flags: 0x2fffc0000000200(slab)
raw:
02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6c02e00
raw:
0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881f59a6a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8881f59a6a80: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc
>
ffff8881f59a6b00: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
^
ffff8881f59a6b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881f59a6c00: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
cpia2_init does not check return value of cpia2_init, if it failed
in usb_register_driver, there is already cleanup using driver_unregister.
No need call cpia2_usb_cleanup on module exit.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiufei Xue [Thu, 11 Apr 2019 17:25:12 +0000 (19:25 +0200)]
fbdev: fix WARNING in __alloc_pages_nodemask bug
commit
8c40292be9169a9cbe19aadd1a6fc60cbd1af82f upstream.
Syzkaller hit 'WARNING in __alloc_pages_nodemask' bug.
WARNING: CPU: 1 PID: 1473 at mm/page_alloc.c:4377
__alloc_pages_nodemask+0x4da/0x2130
Kernel panic - not syncing: panic_on_warn set ...
Call Trace:
alloc_pages_current+0xb1/0x1e0
kmalloc_order+0x1f/0x60
kmalloc_order_trace+0x1d/0x120
fb_alloc_cmap_gfp+0x85/0x2b0
fb_set_user_cmap+0xff/0x370
do_fb_ioctl+0x949/0xa20
fb_ioctl+0xdd/0x120
do_vfs_ioctl+0x186/0x1070
ksys_ioctl+0x89/0xa0
__x64_sys_ioctl+0x74/0xb0
do_syscall_64+0xc8/0x550
entry_SYSCALL_64_after_hwframe+0x49/0xbe
This is a warning about order >= MAX_ORDER and the order is from
userspace ioctl. Add flag __NOWARN to silence this warning.
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amir Goldstein [Thu, 28 Mar 2019 15:38:29 +0000 (17:38 +0200)]
ovl: relax WARN_ON() for overlapping layers use case
commit
acf3062a7e1ccf67c6f7e7c28671a6708fde63b0 upstream.
This nasty little syzbot repro:
https://syzkaller.appspot.com/x/repro.syz?x=
12c7a94f400000
Creates overlay mounts where the same directory is both in upper and lower
layers. Simplified example:
mkdir foo work
mount -t overlay none foo -o"lowerdir=.,upperdir=foo,workdir=work"
The repro runs several threads in parallel that attempt to chdir into foo
and attempt to symlink/rename/exec/mkdir the file bar.
The repro hits a WARN_ON() I placed in ovl_instantiate(), which suggests
that an overlay inode already exists in cache and is hashed by the pointer
of the real upper dentry that ovl_create_real() has just created. At the
point of the WARN_ON(), for overlay dir inode lock is held and upper dir
inode lock, so at first, I did not see how this was possible.
On a closer look, I see that after ovl_create_real(), because of the
overlapping upper and lower layers, a lookup by another thread can find the
file foo/bar that was just created in upper layer, at overlay path
foo/foo/bar and hash the an overlay inode with the new real dentry as lower
dentry. This is possible because the overlay directory foo/foo is not
locked and the upper dentry foo/bar is in dcache, so ovl_lookup() can find
it without taking upper dir inode shared lock.
Overlapping layers is considered a wrong setup which would result in
unexpected behavior, but it shouldn't crash the kernel and it shouldn't
trigger WARN_ON() either, so relax this WARN_ON() and leave a pr_warn()
instead to cover all cases of failure to get an overlay inode.
The error returned from failure to insert new inode to cache with
inode_insert5() was changed to -EEXIST, to distinguish from the error
-ENOMEM returned on failure to get/allocate inode with iget5_locked().
Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com
Fixes:
01b39dcc9568 ("ovl: use inode_insert5() to hash a newly...")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josef Bacik [Wed, 16 Jan 2019 16:00:57 +0000 (11:00 -0500)]
btrfs: honor path->skip_locking in backref code
commit
38e3eebff643db725633657d1d87a3be019d1018 upstream.
Qgroups will do the old roots lookup at delayed ref time, which could be
while walking down the extent root while running a delayed ref. This
should be fine, except we specifically lock eb's in the backref walking
code irrespective of path->skip_locking, which deadlocks the system.
Fix up the backref code to honor path->skip_locking, nobody will be
modifying the commit_root when we're searching so it's completely safe
to do.
This happens since
fb235dc06fac ("btrfs: qgroup: Move half of the qgroup
accounting time out of commit trans"), kernel may lockup with quota
enabled.
There is one backref trace triggered by snapshot dropping along with
write operation in the source subvolume. The example can be reliably
reproduced:
btrfs-cleaner D 0 4062 2 0x80000000
Call Trace:
schedule+0x32/0x90
btrfs_tree_read_lock+0x93/0x130 [btrfs]
find_parent_nodes+0x29b/0x1170 [btrfs]
btrfs_find_all_roots_safe+0xa8/0x120 [btrfs]
btrfs_find_all_roots+0x57/0x70 [btrfs]
btrfs_qgroup_trace_extent_post+0x37/0x70 [btrfs]
btrfs_qgroup_trace_leaf_items+0x10b/0x140 [btrfs]
btrfs_qgroup_trace_subtree+0xc8/0xe0 [btrfs]
do_walk_down+0x541/0x5e3 [btrfs]
walk_down_tree+0xab/0xe7 [btrfs]
btrfs_drop_snapshot+0x356/0x71a [btrfs]
btrfs_clean_one_deleted_snapshot+0xb8/0xf0 [btrfs]
cleaner_kthread+0x12b/0x160 [btrfs]
kthread+0x112/0x130
ret_from_fork+0x27/0x50
When dropping snapshots with qgroup enabled, we will trigger backref
walk.
However such backref walk at that timing is pretty dangerous, as if one
of the parent nodes get WRITE locked by other thread, we could cause a
dead lock.
For example:
FS 260 FS 261 (Dropped)
node A node B
/ \ / \
node C node D node E
/ \ / \ / \
leaf F|leaf G|leaf H|leaf I|leaf J|leaf K
The lock sequence would be:
Thread A (cleaner) | Thread B (other writer)
-----------------------------------------------------------------------
write_lock(B) |
write_lock(D) |
^^^ called by walk_down_tree() |
| write_lock(A)
| write_lock(D) << Stall
read_lock(H) << for backref walk |
read_lock(D) << lock owner is |
the same thread A |
so read lock is OK |
read_lock(A) << Stall |
So thread A hold write lock D, and needs read lock A to unlock.
While thread B holds write lock A, while needs lock D to unlock.
This will cause a deadlock.
This is not only limited to snapshot dropping case. As the backref
walk, even only happens on commit trees, is breaking the normal top-down
locking order, makes it deadlock prone.
Fixes:
fb235dc06fac ("btrfs: qgroup: Move half of the qgroup accounting time out of commit trans")
CC: stable@vger.kernel.org # 4.14+
Reported-and-tested-by: David Sterba <dsterba@suse.com>
Reported-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[ rebase to latest branch and fix lock assert bug in btrfs/007 ]
[ backport to linux-4.19.y branch, solve minor conflicts ]
Signed-off-by: Qu Wenruo <wqu@suse.com>
[ copy logs and deadlock analysis from Qu's patch ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Mon, 29 Apr 2019 12:03:57 +0000 (13:03 +0100)]
arm64: errata: Add workaround for Cortex-A76 erratum #1463225
commit
969f5ea627570e91c9d54403287ee3ed657f58fe upstream.
Revisions of the Cortex-A76 CPU prior to r4p0 are affected by an erratum
that can prevent interrupts from being taken when single-stepping.
This patch implements a software workaround to prevent userspace from
effectively being able to disable interrupts.
Cc: <stable@vger.kernel.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arend van Spriel [Thu, 14 Feb 2019 12:43:48 +0000 (13:43 +0100)]
brcmfmac: add subtype check for event handling in data path
commit
a4176ec356c73a46c07c181c6d04039fafa34a9f upstream.
For USB there is no separate channel being used to pass events
from firmware to the host driver and as such are passed over the
data path. In order to detect mock event messages an additional
check is needed on event subtype. This check is added conditionally
using unlikely() keyword.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arend van Spriel [Thu, 14 Feb 2019 12:43:47 +0000 (13:43 +0100)]
brcmfmac: assure SSID length from firmware is limited
commit
1b5e2423164b3670e8bc9174e4762d297990deff upstream.
The SSID length as received from firmware should not exceed
IEEE80211_MAX_SSID_LEN as that would result in heap overflow.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Borkmann [Mon, 22 Oct 2018 23:11:04 +0000 (01:11 +0200)]
bpf: add bpf_jit_limit knob to restrict unpriv allocations
commit
ede95a63b5e84ddeea6b0c473b36ab8bfd8c6ce3 upstream.
Rick reported that the BPF JIT could potentially fill the entire module
space with BPF programs from unprivileged users which would prevent later
attempts to load normal kernel modules or privileged BPF programs, for
example. If JIT was enabled but unsuccessful to generate the image, then
before commit
290af86629b2 ("bpf: introduce BPF_JIT_ALWAYS_ON config")
we would always fall back to the BPF interpreter. Nowadays in the case
where the CONFIG_BPF_JIT_ALWAYS_ON could be set, then the load will abort
with a failure since the BPF interpreter was compiled out.
Add a global limit and enforce it for unprivileged users such that in case
of BPF interpreter compiled out we fail once the limit has been reached
or we fall back to BPF interpreter earlier w/o using module mem if latter
was compiled in. In a next step, fair share among unprivileged users can
be resolved in particular for the case where we would fail hard once limit
is reached.
Fixes:
290af86629b2 ("bpf: introduce BPF_JIT_ALWAYS_ON config")
Fixes:
0a14842f5a3c ("net: filter: Just In Time compiler for x86-64")
Co-Developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Olga Kornievskaia [Thu, 11 Apr 2019 18:34:18 +0000 (14:34 -0400)]
NFSv4.1 fix incorrect return value in copy_file_range
commit
0769663b4f580566ef6cdf366f3073dbe8022c39 upstream.
According to the NFSv4.2 spec if the input and output file is the
same file, operation should fail with EINVAL. However, linux
copy_file_range() system call has no such restrictions. Therefore,
in such case let's return EOPNOTSUPP and allow VFS to fallback
to doing do_splice_direct(). Also when copy_file_range is called
on an NFSv4.0 or 4.1 mount (ie., a server that doesn't support
COPY functionality), we also need to return EOPNOTSUPP and
fallback to a regular copy.
Fixes xfstest generic/075, generic/091, generic/112, generic/263
for all NFSv4.x versions.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Yu Xu <xuyu@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Olga Kornievskaia [Sat, 12 Jan 2019 00:04:44 +0000 (19:04 -0500)]
NFSv4.2 fix unnecessary retry in nfs4_copy_file_range
commit
45ac486ecf2dc998e25cf32f0cabf2deaad875be upstream.
Currently nfs42_proc_copy_file_range() can not return EAGAIN.
Fixes:
e4648aa4f98a ("NFS recover from destination server reboot for copies")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Yu Xu <xuyu@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shile Zhang [Mon, 1 Apr 2019 15:47:00 +0000 (17:47 +0200)]
fbdev: fix divide error in fb_var_to_videomode
commit
cf84807f6dd0be5214378e66460cfc9187f532f9 upstream.
To fix following divide-by-zero error found by Syzkaller:
divide error: 0000 [#1] SMP PTI
CPU: 7 PID: 8447 Comm: test Kdump: loaded Not tainted 4.19.24-8.al7.x86_64 #1
Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
RIP: 0010:fb_var_to_videomode+0xae/0xc0
Code: 04 44 03 46 78 03 4e 7c 44 03 46 68 03 4e 70 89 ce d1 ee 69 c0 e8 03 00 00 f6 c2 01 0f 45 ce 83 e2 02 8d 34 09 0f 45 ce 31 d2 <41> f7 f0 31 d2 f7 f1 89 47 08 f3 c3 66 0f 1f 44 00 00 0f 1f 44 00
RSP: 0018:
ffffb7e189347bf0 EFLAGS:
00010246
RAX:
00000000e1692410 RBX:
ffffb7e189347d60 RCX:
0000000000000000
RDX:
0000000000000000 RSI:
0000000000000000 RDI:
ffffb7e189347c10
RBP:
ffff99972a091c00 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
0000000000000100
R13:
0000000000010000 R14:
00007ffd66baf6d0 R15:
0000000000000000
FS:
00007f2054d11740(0000) GS:
ffff99972fbc0000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007f205481fd20 CR3:
00000004288a0001 CR4:
00000000001606a0
Call Trace:
fb_set_var+0x257/0x390
? lookup_fast+0xbb/0x2b0
? fb_open+0xc0/0x140
? chrdev_open+0xa6/0x1a0
do_fb_ioctl+0x445/0x5a0
do_vfs_ioctl+0x92/0x5f0
? __alloc_fd+0x3d/0x160
ksys_ioctl+0x60/0x90
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x5b/0x190
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f20548258d7
Code: 44 00 00 48 8b 05 b9 15 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 89 15 2d 00 f7 d8 64 89 01 48
It can be triggered easily with following test code:
#include <linux/fb.h>
#include <fcntl.h>
#include <sys/ioctl.h>
int main(void)
{
struct fb_var_screeninfo var = {.activate = 0x100, .pixclock = 60};
int fd = open("/dev/fb0", O_RDWR);
if (fd < 0)
return 1;
if (ioctl(fd, FBIOPUT_VSCREENINFO, &var))
return 1;
return 0;
}
Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Cc: Fredrik Noring <noring@nocrew.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Thu, 20 Dec 2018 18:13:07 +0000 (19:13 +0100)]
udlfb: fix some inconsistent NULL checking
commit
c143a559b073aeea688b9bb7c5b46f3cf322d569 upstream.
In the current kernel, then kzalloc() can't fail for small allocations,
but if it did fail then we would have a NULL dereference in the error
handling. Also in dlfb_usb_disconnect() if "info" were NULL then it
would cause an Oops inside the unregister_framebuffer() function but it
can't be NULL so let's remove that check.
Fixes:
68a958a915ca ("udlfb: handle unplug properly")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Bernie Thompson <bernie@plugable.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Wen Yang <wen.yang99@zte.com.cn>
[b.zolnierkie: added "Fixes:" tag]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 13 May 2019 03:39:12 +0000 (13:39 +1000)]
btrfs: sysfs: don't leak memory when failing add fsid
commit
e32773357d5cc271b1d23550b3ed026eb5c2a468 upstream.
A failed call to kobject_init_and_add() must be followed by a call to
kobject_put(). Currently in the error path when adding fs_devices we
are missing this call. This could be fixed by calling
btrfs_sysfs_remove_fsid() if btrfs_sysfs_add_fsid() returns an error or
by adding a call to kobject_put() directly in btrfs_sysfs_add_fsid().
Here we choose the second option because it prevents the slightly
unusual error path handling requirements of kobject from leaking out
into btrfs functions.
Add a call to kobject_put() in the error path of kobject_add_and_init().
This causes the release method to be called if kobject_init_and_add()
fails. open_tree() is the function that calls btrfs_sysfs_add_fsid()
and the error code in this function is already written with the
assumption that the release method is called during the error path of
open_tree() (as seen by the call to btrfs_sysfs_remove_fsid() under the
fail_fsdev_sysfs label).
Cc: stable@vger.kernel.org # v4.4+
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 13 May 2019 03:39:11 +0000 (13:39 +1000)]
btrfs: sysfs: Fix error path kobject memory leak
commit
450ff8348808a89cc27436771aa05c2b90c0eef1 upstream.
If a call to kobject_init_and_add() fails we must call kobject_put()
otherwise we leak memory.
Calling kobject_put() when kobject_init_and_add() fails drops the
refcount back to 0 and calls the ktype release method (which in turn
calls the percpu destroy and kfree).
Add call to kobject_put() in the error path of call to
kobject_init_and_add().
Cc: stable@vger.kernel.org # v4.4+
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Mon, 6 May 2019 15:44:02 +0000 (16:44 +0100)]
Btrfs: fix race between ranged fsync and writeback of adjacent ranges
commit
0c713cbab6200b0ab6473b50435e450a6e1de85d upstream.
When we do a full fsync (the bit BTRFS_INODE_NEEDS_FULL_SYNC is set in the
inode) that happens to be ranged, which happens during a msync() or writes
for files opened with O_SYNC for example, we can end up with a corrupt log,
due to different file extent items representing ranges that overlap with
each other, or hit some assertion failures.
When doing a ranged fsync we only flush delalloc and wait for ordered
exents within that range. If while we are logging items from our inode
ordered extents for adjacent ranges complete, we end up in a race that can
make us insert the file extent items that overlap with others we logged
previously and the assertion failures.
For example, if tree-log.c:copy_items() receives a leaf that has the
following file extents items, all with a length of 4K and therefore there
is an implicit hole in the range 68K to 72K - 1:
(257 EXTENT_ITEM 64K), (257 EXTENT_ITEM 72K), (257 EXTENT_ITEM 76K), ...
It copies them to the log tree. However due to the need to detect implicit
holes, it may release the path, in order to look at the previous leaf to
detect an implicit hole, and then later it will search again in the tree
for the first file extent item key, with the goal of locking again the
leaf (which might have changed due to concurrent changes to other inodes).
However when it locks again the leaf containing the first key, the key
corresponding to the extent at offset 72K may not be there anymore since
there is an ordered extent for that range that is finishing (that is,
somewhere in the middle of btrfs_finish_ordered_io()), and it just
removed the file extent item but has not yet replaced it with a new file
extent item, so the part of copy_items() that does hole detection will
decide that there is a hole in the range starting from 68K to 76K - 1,
and therefore insert a file extent item to represent that hole, having
a key offset of 68K. After that we now have a log tree with 2 different
extent items that have overlapping ranges:
1) The file extent item copied before copy_items() released the path,
which has a key offset of 72K and a length of 4K, representing the
file range 72K to 76K - 1.
2) And a file extent item representing a hole that has a key offset of
68K and a length of 8K, representing the range 68K to 76K - 1. This
item was inserted after releasing the path, and overlaps with the
extent item inserted before.
The overlapping extent items can cause all sorts of unpredictable and
incorrect behaviour, either when replayed or if a fast (non full) fsync
happens later, which can trigger a BUG_ON() when calling
btrfs_set_item_key_safe() through __btrfs_drop_extents(), producing a
trace like the following:
[61666.783269] ------------[ cut here ]------------
[61666.783943] kernel BUG at fs/btrfs/ctree.c:3182!
[61666.784644] invalid opcode: 0000 [#1] PREEMPT SMP
(...)
[61666.786253] task:
ffff880117b88c40 task.stack:
ffffc90008168000
[61666.786253] RIP: 0010:btrfs_set_item_key_safe+0x7c/0xd2 [btrfs]
[61666.786253] RSP: 0018:
ffffc9000816b958 EFLAGS:
00010246
[61666.786253] RAX:
0000000000000000 RBX:
000000000000000f RCX:
0000000000030000
[61666.786253] RDX:
0000000000000000 RSI:
ffffc9000816ba4f RDI:
ffffc9000816b937
[61666.786253] RBP:
ffffc9000816b998 R08:
ffff88011dae2428 R09:
0000000000001000
[61666.786253] R10:
0000160000000000 R11:
6db6db6db6db6db7 R12:
ffff88011dae2418
[61666.786253] R13:
ffffc9000816ba4f R14:
ffff8801e10c4118 R15:
ffff8801e715c000
[61666.786253] FS:
00007f6060a18700(0000) GS:
ffff88023f5c0000(0000) knlGS:
0000000000000000
[61666.786253] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[61666.786253] CR2:
00007f6060a28000 CR3:
0000000213e69000 CR4:
00000000000006e0
[61666.786253] Call Trace:
[61666.786253] __btrfs_drop_extents+0x5e3/0xaad [btrfs]
[61666.786253] ? time_hardirqs_on+0x9/0x14
[61666.786253] btrfs_log_changed_extents+0x294/0x4e0 [btrfs]
[61666.786253] ? release_extent_buffer+0x38/0xb4 [btrfs]
[61666.786253] btrfs_log_inode+0xb6e/0xcdc [btrfs]
[61666.786253] ? lock_acquire+0x131/0x1c5
[61666.786253] ? btrfs_log_inode_parent+0xee/0x659 [btrfs]
[61666.786253] ? arch_local_irq_save+0x9/0xc
[61666.786253] ? btrfs_log_inode_parent+0x1f5/0x659 [btrfs]
[61666.786253] btrfs_log_inode_parent+0x223/0x659 [btrfs]
[61666.786253] ? arch_local_irq_save+0x9/0xc
[61666.786253] ? lockref_get_not_zero+0x2c/0x34
[61666.786253] ? rcu_read_unlock+0x3e/0x5d
[61666.786253] btrfs_log_dentry_safe+0x60/0x7b [btrfs]
[61666.786253] btrfs_sync_file+0x317/0x42c [btrfs]
[61666.786253] vfs_fsync_range+0x8c/0x9e
[61666.786253] SyS_msync+0x13c/0x1c9
[61666.786253] entry_SYSCALL_64_fastpath+0x18/0xad
A sample of a corrupt log tree leaf with overlapping extents I got from
running btrfs/072:
item 14 key (295 108 200704) itemoff 2599 itemsize 53
extent data disk bytenr 0 nr 0
extent data offset 0 nr 458752 ram 458752
item 15 key (295 108 659456) itemoff 2546 itemsize 53
extent data disk bytenr
4343541760 nr 770048
extent data offset 606208 nr 163840 ram 770048
item 16 key (295 108 663552) itemoff 2493 itemsize 53
extent data disk bytenr
4343541760 nr 770048
extent data offset 610304 nr 155648 ram 770048
item 17 key (295 108 819200) itemoff 2440 itemsize 53
extent data disk bytenr
4334788608 nr 4096
extent data offset 0 nr 4096 ram 4096
The file extent item at offset 659456 (item 15) ends at offset 823296
(659456 + 163840) while the next file extent item (item 16) starts at
offset 663552.
Another different problem that the race can trigger is a failure in the
assertions at tree-log.c:copy_items(), which expect that the first file
extent item key we found before releasing the path exists after we have
released path and that the last key we found before releasing the path
also exists after releasing the path:
$ cat -n fs/btrfs/tree-log.c
4080 if (need_find_last_extent) {
4081 /* btrfs_prev_leaf could return 1 without releasing the path */
4082 btrfs_release_path(src_path);
4083 ret = btrfs_search_slot(NULL, inode->root, &first_key,
4084 src_path, 0, 0);
4085 if (ret < 0)
4086 return ret;
4087 ASSERT(ret == 0);
(...)
4103 if (i >= btrfs_header_nritems(src_path->nodes[0])) {
4104 ret = btrfs_next_leaf(inode->root, src_path);
4105 if (ret < 0)
4106 return ret;
4107 ASSERT(ret == 0);
4108 src = src_path->nodes[0];
4109 i = 0;
4110 need_find_last_extent = true;
4111 }
(...)
The second assertion implicitly expects that the last key before the path
release still exists, because the surrounding while loop only stops after
we have found that key. When this assertion fails it produces a stack like
this:
[139590.037075] assertion failed: ret == 0, file: fs/btrfs/tree-log.c, line: 4107
[139590.037406] ------------[ cut here ]------------
[139590.037707] kernel BUG at fs/btrfs/ctree.h:3546!
[139590.038034] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
[139590.038340] CPU: 1 PID: 31841 Comm: fsstress Tainted: G W 5.0.0-btrfs-next-46 #1
(...)
[139590.039354] RIP: 0010:assfail.constprop.24+0x18/0x1a [btrfs]
(...)
[139590.040397] RSP: 0018:
ffffa27f48f2b9b0 EFLAGS:
00010282
[139590.040730] RAX:
0000000000000041 RBX:
ffff897c635d92c8 RCX:
0000000000000000
[139590.041105] RDX:
0000000000000000 RSI:
ffff897d36a96868 RDI:
ffff897d36a96868
[139590.041470] RBP:
ffff897d1b9a0708 R08:
0000000000000000 R09:
0000000000000000
[139590.041815] R10:
0000000000000008 R11:
0000000000000000 R12:
0000000000000013
[139590.042159] R13:
0000000000000227 R14:
ffff897cffcbba88 R15:
0000000000000001
[139590.042501] FS:
00007f2efc8dee80(0000) GS:
ffff897d36a80000(0000) knlGS:
0000000000000000
[139590.042847] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[139590.043199] CR2:
00007f8c064935e0 CR3:
0000000232252002 CR4:
00000000003606e0
[139590.043547] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[139590.043899] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[139590.044250] Call Trace:
[139590.044631] copy_items+0xa3f/0x1000 [btrfs]
[139590.045009] ? generic_bin_search.constprop.32+0x61/0x200 [btrfs]
[139590.045396] btrfs_log_inode+0x7b3/0xd70 [btrfs]
[139590.045773] btrfs_log_inode_parent+0x2b3/0xce0 [btrfs]
[139590.046143] ? do_raw_spin_unlock+0x49/0xc0
[139590.046510] btrfs_log_dentry_safe+0x4a/0x70 [btrfs]
[139590.046872] btrfs_sync_file+0x3b6/0x440 [btrfs]
[139590.047243] btrfs_file_write_iter+0x45b/0x5c0 [btrfs]
[139590.047592] __vfs_write+0x129/0x1c0
[139590.047932] vfs_write+0xc2/0x1b0
[139590.048270] ksys_write+0x55/0xc0
[139590.048608] do_syscall_64+0x60/0x1b0
[139590.048946] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[139590.049287] RIP: 0033:0x7f2efc4be190
(...)
[139590.050342] RSP: 002b:
00007ffe743243a8 EFLAGS:
00000246 ORIG_RAX:
0000000000000001
[139590.050701] RAX:
ffffffffffffffda RBX:
0000000000008d58 RCX:
00007f2efc4be190
[139590.051067] RDX:
0000000000008d58 RSI:
00005567eca0f370 RDI:
0000000000000003
[139590.051459] RBP:
0000000000000024 R08:
0000000000000003 R09:
0000000000008d60
[139590.051863] R10:
0000000000000078 R11:
0000000000000246 R12:
0000000000000003
[139590.052252] R13:
00000000003d3507 R14:
00005567eca0f370 R15:
0000000000000000
(...)
[139590.055128] ---[ end trace
193f35d0215cdeeb ]---
So fix this race between a full ranged fsync and writeback of adjacent
ranges by flushing all delalloc and waiting for all ordered extents to
complete before logging the inode. This is the simplest way to solve the
problem because currently the full fsync path does not deal with ranges
at all (it assumes a full range from 0 to LLONG_MAX) and it always needs
to look at adjacent ranges for hole detection. For use cases of ranged
fsyncs this can make a few fsyncs slower but on the other hand it can
make some following fsyncs to other ranges do less work or no need to do
anything at all. A full fsync is rare anyway and happens only once after
loading/creating an inode and once after less common operations such as a
shrinking truncate.
This is an issue that exists for a long time, and was often triggered by
generic/127, because it does mmap'ed writes and msync (which triggers a
ranged fsync). Adding support for the tree checker to detect overlapping
extents (next patch in the series) and trigger a WARN() when such cases
are found, and then calling btrfs_check_leaf_full() at the end of
btrfs_insert_file_extent() made the issue much easier to detect. Running
btrfs/072 with that change to the tree checker and making fsstress open
files always with O_SYNC made it much easier to trigger the issue (as
triggering it with generic/127 is very rare).
CC: stable@vger.kernel.org # 3.16+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Mon, 6 May 2019 15:43:51 +0000 (16:43 +0100)]
Btrfs: avoid fallback to transaction commit during fsync of files with holes
commit
ebb929060aeb162417b4c1307e63daee47b208d9 upstream.
When we are doing a full fsync (bit BTRFS_INODE_NEEDS_FULL_SYNC set) of a
file that has holes and has file extent items spanning two or more leafs,
we can end up falling to back to a full transaction commit due to a logic
bug that leads to failure to insert a duplicate file extent item that is
meant to represent a hole between the last file extent item of a leaf and
the first file extent item in the next leaf. The failure (EEXIST error)
leads to a transaction commit (as most errors when logging an inode do).
For example, we have the two following leafs:
Leaf N:
-----------------------------------------------
| ..., ..., ..., (257, FILE_EXTENT_ITEM, 64K) |
-----------------------------------------------
The file extent item at the end of leaf N has a length of 4Kb,
representing the file range from 64K to 68K - 1.
Leaf N + 1:
-----------------------------------------------
| (257, FILE_EXTENT_ITEM, 72K), ..., ..., ... |
-----------------------------------------------
The file extent item at the first slot of leaf N + 1 has a length of
4Kb too, representing the file range from 72K to 76K - 1.
During the full fsync path, when we are at tree-log.c:copy_items() with
leaf N as a parameter, after processing the last file extent item, that
represents the extent at offset 64K, we take a look at the first file
extent item at the next leaf (leaf N + 1), and notice there's a 4K hole
between the two extents, and therefore we insert a file extent item
representing that hole, starting at file offset 68K and ending at offset
72K - 1. However we don't update the value of *last_extent, which is used
to represent the end offset (plus 1, non-inclusive end) of the last file
extent item inserted in the log, so it stays with a value of 68K and not
with a value of 72K.
Then, when copy_items() is called for leaf N + 1, because the value of
*last_extent is smaller then the offset of the first extent item in the
leaf (68K < 72K), we look at the last file extent item in the previous
leaf (leaf N) and see it there's a 4K gap between it and our first file
extent item (again, 68K < 72K), so we decide to insert a file extent item
representing the hole, starting at file offset 68K and ending at offset
72K - 1, this insertion will fail with -EEXIST being returned from
btrfs_insert_file_extent() because we already inserted a file extent item
representing a hole for this offset (68K) in the previous call to
copy_items(), when processing leaf N.
The -EEXIST error gets propagated to the fsync callback, btrfs_sync_file(),
which falls back to a full transaction commit.
Fix this by adjusting *last_extent after inserting a hole when we had to
look at the next leaf.
Fixes:
4ee3fad34a9c ("Btrfs: fix fsync after hole punching when using no-holes feature")
Cc: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Mon, 29 Apr 2019 12:08:14 +0000 (13:08 +0100)]
Btrfs: do not abort transaction at btrfs_update_root() after failure to COW path
commit
72bd2323ec87722c115a5906bc6a1b31d11e8f54 upstream.
Currently when we fail to COW a path at btrfs_update_root() we end up
always aborting the transaction. However all the current callers of
btrfs_update_root() are able to deal with errors returned from it, many do
end up aborting the transaction themselves (directly or not, such as the
transaction commit path), other BUG_ON() or just gracefully cancel whatever
they were doing.
When syncing the fsync log, we call btrfs_update_root() through
tree-log.c:update_log_root(), and if it returns an -ENOSPC error, the log
sync code does not abort the transaction, instead it gracefully handles
the error and returns -EAGAIN to the fsync handler, so that it falls back
to a transaction commit. Any other error different from -ENOSPC, makes the
log sync code abort the transaction.
So remove the transaction abort from btrfs_update_log() when we fail to
COW a path to update the root item, so that if an -ENOSPC failure happens
we avoid aborting the current transaction and have a chance of the fsync
succeeding after falling back to a transaction commit.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203413
Fixes:
79787eaab46121 ("btrfs: replace many BUG_ONs with proper error handling")
Cc: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josef Bacik [Fri, 3 May 2019 15:10:06 +0000 (11:10 -0400)]
btrfs: don't double unlock on error in btrfs_punch_hole
commit
8fca955057b9c58467d1b231e43f19c4cf26ae8c upstream.
If we have an error writing out a delalloc range in
btrfs_punch_hole_lock_range we'll unlock the inode and then goto
out_only_mutex, where we will again unlock the inode. This is bad,
don't do this.
Fixes:
f27451f22996 ("Btrfs: add support for fallocate's zero range operation")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Gruenbacher [Fri, 17 May 2019 18:18:43 +0000 (19:18 +0100)]
gfs2: Fix sign extension bug in gfs2_update_stats
commit
5a5ec83d6ac974b12085cd99b196795f14079037 upstream.
Commit
4d207133e9c3 changed the types of the statistic values in struct
gfs2_lkstats from s64 to u64. Because of that, what should be a signed
value in gfs2_update_stats turned into an unsigned value. When shifted
right, we end up with a large positive value instead of a small negative
value, which results in an incorrect variance estimate.
Fixes:
4d207133e9c3 ("gfs2: Make statistics unsigned, suitable for use with do_div()")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christoph Hellwig [Tue, 30 Apr 2019 10:51:50 +0000 (06:51 -0400)]
arm64/iommu: handle non-remapped addresses in ->mmap and ->get_sgtable
commit
a98d9ae937d256ed679a935fc82d9deaa710d98e upstream.
DMA allocations that can't sleep may return non-remapped addresses, but
we do not properly handle them in the mmap and get_sgtable methods.
Resolve non-vmalloc addresses using virt_to_page to handle this corner
case.
Cc: <stable@vger.kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ard Biesheuvel [Thu, 23 May 2019 09:17:37 +0000 (10:17 +0100)]
arm64/kernel: kaslr: reduce module randomization range to 2 GB
commit
b2eed9b58811283d00fa861944cb75797d4e52a7 upstream.
The following commit
7290d5809571 ("module: use relative references for __ksymtab entries")
updated the ksymtab handling of some KASLR capable architectures
so that ksymtab entries are emitted as pairs of 32-bit relative
references. This reduces the size of the entries, but more
importantly, it gets rid of statically assigned absolute
addresses, which require fixing up at boot time if the kernel
is self relocating (which takes a 24 byte RELA entry for each
member of the ksymtab struct).
Since ksymtab entries are always part of the same module as the
symbol they export, it was assumed at the time that a 32-bit
relative reference is always sufficient to capture the offset
between a ksymtab entry and its target symbol.
Unfortunately, this is not always true: in the case of per-CPU
variables, a per-CPU variable's base address (which usually differs
from the actual address of any of its per-CPU copies) is allocated
in the vicinity of the ..data.percpu section in the core kernel
(i.e., in the per-CPU reserved region which follows the section
containing the core kernel's statically allocated per-CPU variables).
Since we randomize the module space over a 4 GB window covering
the core kernel (based on the -/+ 4 GB range of an ADRP/ADD pair),
we may end up putting the core kernel out of the -/+ 2 GB range of
32-bit relative references of module ksymtab entries that refer to
per-CPU variables.
So reduce the module randomization range a bit further. We lose
1 bit of randomization this way, but this is something we can
tolerate.
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Williams [Fri, 17 May 2019 00:05:21 +0000 (17:05 -0700)]
libnvdimm/pmem: Bypass CONFIG_HARDENED_USERCOPY overhead
commit
52f476a323f9efc959be1c890d0cdcf12e1582e0 upstream.
Jeff discovered that performance improves from ~375K iops to ~519K iops
on a simple psync-write fio workload when moving the location of 'struct
page' from the default PMEM location to DRAM. This result is surprising
because the expectation is that 'struct page' for dax is only needed for
third party references to dax mappings. For example, a dax-mapped buffer
passed to another system call for direct-I/O requires 'struct page' for
sending the request down the driver stack and pinning the page. There is
no usage of 'struct page' for first party access to a file via
read(2)/write(2) and friends.
However, this "no page needed" expectation is violated by
CONFIG_HARDENED_USERCOPY and the check_copy_size() performed in
copy_from_iter_full_nocache() and copy_to_iter_mcsafe(). The
check_heap_object() helper routine assumes the buffer is backed by a
slab allocator (DRAM) page and applies some checks. Those checks are
invalid, dax pages do not originate from the slab, and redundant,
dax_iomap_actor() has already validated that the I/O is within bounds.
Specifically that routine validates that the logical file offset is
within bounds of the file, then it does a sector-to-pfn translation
which validates that the physical mapping is within bounds of the block
device.
Bypass additional hardened usercopy overhead and call the 'no check'
versions of the copy_{to,from}_iter operations directly.
Fixes:
0aed55af8834 ("x86, uaccess: introduce copy_from_iter_flushcache...")
Cc: <stable@vger.kernel.org>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Matthew Wilcox <willy@infradead.org>
Reported-and-tested-by: Jeff Smits <jeff.smits@intel.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suthikulpanit, Suravee [Tue, 14 May 2019 15:49:52 +0000 (15:49 +0000)]
kvm: svm/avic: fix off-by-one in checking host APIC ID
commit
c9bcd3e3335d0a29d89fabd2c385e1b989e6f1b0 upstream.
Current logic does not allow VCPU to be loaded onto CPU with
APIC ID 255. This should be allowed since the host physical APIC ID
field in the AVIC Physical APIC table entry is an 8-bit value,
and APIC ID 255 is valid in system with x2APIC enabled.
Instead, do not allow VCPU load if the host APIC ID cannot be
represented by an 8-bit value.
Also, use the more appropriate AVIC_PHYSICAL_ID_ENTRY_HOST_PHYSICAL_ID_MASK
instead of AVIC_MAX_PHYSICAL_ID_COUNT.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trac Hoang [Thu, 9 May 2019 17:24:27 +0000 (10:24 -0700)]
mmc: sdhci-iproc: Set NO_HISPD bit to fix HS50 data hold time problem
commit
ec0970e0a1b2c807c908d459641a9f9a1be3e130 upstream.
The iproc host eMMC/SD controller hold time does not meet the
specification in the HS50 mode. This problem can be mitigated
by disabling the HISPD bit; thus forcing the controller output
data to be driven on the falling clock edges rather than the
rising clock edges.
Stable tag (v4.12+) chosen to assist stable kernel maintainers so that
the change does not produce merge conflicts backporting to older kernel
versions. In reality, the timing bug existed since the driver was first
introduced but there is no need for this driver to be supported in kernel
versions that old.
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Trac Hoang <trac.hoang@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trac Hoang [Thu, 9 May 2019 17:24:26 +0000 (10:24 -0700)]
mmc: sdhci-iproc: cygnus: Set NO_HISPD bit to fix HS50 data hold time problem
commit
b7dfa695afc40d5396ed84b9f25aa3754de23e39 upstream.
The iproc host eMMC/SD controller hold time does not meet the
specification in the HS50 mode. This problem can be mitigated
by disabling the HISPD bit; thus forcing the controller output
data to be driven on the falling clock edges rather than the
rising clock edges.
This change applies only to the Cygnus platform.
Stable tag (v4.12+) chosen to assist stable kernel maintainers so that
the change does not produce merge conflicts backporting to older kernel
versions. In reality, the timing bug existed since the driver was first
introduced but there is no need for this driver to be supported in kernel
versions that old.
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Trac Hoang <trac.hoang@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Axtens [Wed, 15 May 2019 10:24:50 +0000 (20:24 +1000)]
crypto: vmx - CTR: always increment IV as quadword
commit
009b30ac7444c17fae34c4f435ebce8e8e2b3250 upstream.
The kernel self-tests picked up an issue with CTR mode:
alg: skcipher: p8_aes_ctr encryption test failed (wrong result) on test vector 3, cfg="uneven misaligned splits, may sleep"
Test vector 3 has an IV of
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD, so
after 3 increments it should wrap around to 0.
In the aesp8-ppc code from OpenSSL, there are two paths that
increment IVs: the bulk (8 at a time) path, and the individual
path which is used when there are fewer than 8 AES blocks to
process.
In the bulk path, the IV is incremented with vadduqm: "Vector
Add Unsigned Quadword Modulo", which does 128-bit addition.
In the individual path, however, the IV is incremented with
vadduwm: "Vector Add Unsigned Word Modulo", which instead
does 4 32-bit additions. Thus the IV would instead become
FFFFFFFFFFFFFFFFFFFFFFFF00000000, throwing off the result.
Use vadduqm.
This was probably a typo originally, what with q and w being
adjacent. It is a pretty narrow edge case: I am really
impressed by the quality of the kernel self-tests!
Fixes:
5c380d623ed3 ("crypto: vmx - Add support for VMS instructions by ASM")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin K. Petersen [Mon, 20 May 2019 14:57:18 +0000 (10:57 -0400)]
Revert "scsi: sd: Keep disk read-only when re-reading partition"
commit
8acf608e602f6ec38b7cc37b04c80f1ce9a1a6cc upstream.
This reverts commit
20bd1d026aacc5399464f8328f305985c493cde3.
This patch introduced regressions for devices that come online in
read-only state and subsequently switch to read-write.
Given how the partition code is currently implemented it is not
possible to persist the read-only flag across a device revalidate
call. This may need to get addressed in the future since it is common
for user applications to proactively call BLKRRPART.
Reverting this commit will re-introduce a regression where a
device-initiated revalidate event will cause the admin state to be
forgotten. A separate patch will address this issue.
Fixes:
20bd1d026aac ("scsi: sd: Keep disk read-only when re-reading partition")
Cc: <stable@vger.kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrea Parri [Mon, 20 May 2019 17:23:57 +0000 (19:23 +0200)]
sbitmap: fix improper use of smp_mb__before_atomic()
commit
a0934fd2b1208458e55fc4b48f55889809fce666 upstream.
This barrier only applies to the read-modify-write operations; in
particular, it does not apply to the atomic_set() primitive.
Replace the barrier with an smp_mb().
Fixes:
6c0ca7ae292ad ("sbitmap: fix wakeup hang after sbq resize")
Cc: stable@vger.kernel.org
Reported-by: "Paul E. McKenney" <paulmck@linux.ibm.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: linux-block@vger.kernel.org
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrea Parri [Mon, 20 May 2019 17:23:56 +0000 (19:23 +0200)]
bio: fix improper use of smp_mb__before_atomic()
commit
f381c6a4bd0ae0fde2d6340f1b9bb0f58d915de6 upstream.
This barrier only applies to the read-modify-write operations; in
particular, it does not apply to the atomic_set() primitive.
Replace the barrier with an smp_mb().
Fixes:
dac56212e8127 ("bio: skip atomic inc/dec of ->bi_cnt for most use cases")
Cc: stable@vger.kernel.org
Reported-by: "Paul E. McKenney" <paulmck@linux.ibm.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: linux-block@vger.kernel.org
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Bonzini [Fri, 24 May 2019 19:52:46 +0000 (21:52 +0200)]
KVM: x86: fix return value for reserved EFER
commit
66f61c92889ff3ca365161fb29dd36d6354682ba upstream.
Commit
11988499e62b ("KVM: x86: Skip EFER vs. guest CPUID checks for
host-initiated writes", 2019-04-02) introduced a "return false" in a
function returning int, and anyway set_efer has a "nonzero on error"
conventon so it should be returning 1.
Reported-by: Pavel Machek <pavel@denx.de>
Fixes:
11988499e62b ("KVM: x86: Skip EFER vs. guest CPUID checks for host-initiated writes")
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Damien Le Moal [Sat, 16 Mar 2019 00:13:06 +0000 (09:13 +0900)]
f2fs: Fix use of number of devices
commit
0916878da355650d7e77104a7ac0fa1784eca852 upstream.
For a single device mount using a zoned block device, the zone
information for the device is stored in the sbi->devs single entry
array and sbi->s_ndevs is set to 1. This differs from a single device
mount using a regular block device which does not allocate sbi->devs
and sets sbi->s_ndevs to 0.
However, sbi->s_devs == 0 condition is used throughout the code to
differentiate a single device mount from a multi-device mount where
sbi->s_ndevs is always larger than 1. This results in problems with
single zoned block device volumes as these are treated as multi-device
mounts but do not have the start_blk and end_blk information set. One
of the problem observed is skipping of zone discard issuing resulting in
write commands being issued to full zones or unaligned to a zone write
pointer.
Fix this problem by simply treating the cases sbi->s_ndevs == 0 (single
regular block device mount) and sbi->s_ndevs == 1 (single zoned block
device mount) in the same manner. This is done by introducing the
helper function f2fs_is_multi_device() and using this helper in place
of direct tests of sbi->s_ndevs value, improving code readability.
Fixes:
7bb3a371d199 ("f2fs: Fix zoned block device support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Fri, 24 May 2019 03:07:08 +0000 (23:07 -0400)]
ext4: wait for outstanding dio during truncate in nojournal mode
commit
82a25b027ca48d7ef197295846b352345853dfa8 upstream.
We didn't wait for outstanding direct IO during truncate in nojournal
mode (as we skip orphan handling in that case). This can lead to fs
corruption or stale data exposure if truncate ends up freeing blocks
and these get reallocated before direct IO finishes. Fix the condition
determining whether the wait is necessary.
CC: stable@vger.kernel.org
Fixes:
1c9114f9c0f1 ("ext4: serialize unlocked dio reads with truncate")
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Fri, 24 May 2019 03:35:28 +0000 (23:35 -0400)]
ext4: do not delete unlinked inode from orphan list on failed truncate
commit
ee0ed02ca93ef1ecf8963ad96638795d55af2c14 upstream.
It is possible that unlinked inode enters ext4_setattr() (e.g. if
somebody calls ftruncate(2) on unlinked but still open file). In such
case we should not delete the inode from the orphan list if truncate
fails. Note that this is mostly a theoretical concern as filesystem is
corrupted if we reach this path anyway but let's be consistent in our
orphan handling.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (VMware) [Sat, 11 May 2019 12:32:40 +0000 (08:32 -0400)]
x86: Hide the int3_emulate_call/jmp functions from UML
commit
693713cbdb3a4bda5a8a678c31f06560bbb14657 upstream.
User Mode Linux does not have access to the ip or sp fields of the pt_regs,
and accessing them causes UML to fail to build. Hide the int3_emulate_jmp()
and int3_emulate_call() instructions from UML, as it doesn't need them
anyway.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 25 May 2019 16:23:48 +0000 (18:23 +0200)]
Linux 4.19.46
Yifeng Li [Tue, 2 Apr 2019 15:14:10 +0000 (17:14 +0200)]
fbdev: sm712fb: fix memory frequency by avoiding a switch/case fallthrough
commit
9dc20113988b9a75ea6b3abd68dc45e2d73ccdab upstream.
A fallthrough in switch/case was introduced in
f627caf55b8e ("fbdev:
sm712fb: fix crashes and garbled display during DPMS modesetting"),
due to my copy-paste error, which would cause the memory clock frequency
for SM720 to be programmed to SM712.
Since it only reprograms the clock to a different frequency, it's only
a benign issue without visible side-effect, so it also evaded Sudip
Mukherjee's code review and regression tests. scripts/checkpatch.pl
also failed to discover the issue, possibly due to nested switch
statements.
This issue was found by Stephen Rothwell by building linux-next with
-Wimplicit-fallthrough.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes:
f627caf55b8e ("fbdev: sm712fb: fix crashes and garbled display during DPMS modesetting")
Signed-off-by: Yifeng Li <tomli@tomli.me>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Borkmann [Mon, 13 May 2019 23:18:56 +0000 (01:18 +0200)]
bpf, lru: avoid messing with eviction heuristics upon syscall lookup
commit
50b045a8c0ccf44f76640ac3eea8d80ca53979a3 upstream.
One of the biggest issues we face right now with picking LRU map over
regular hash table is that a map walk out of user space, for example,
to just dump the existing entries or to remove certain ones, will
completely mess up LRU eviction heuristics and wrong entries such
as just created ones will get evicted instead. The reason for this
is that we mark an entry as "in use" via bpf_lru_node_set_ref() from
system call lookup side as well. Thus upon walk, all entries are
being marked, so information of actual least recently used ones
are "lost".
In case of Cilium where it can be used (besides others) as a BPF
based connection tracker, this current behavior causes disruption
upon control plane changes that need to walk the map from user space
to evict certain entries. Discussion result from bpfconf [0] was that
we should simply just remove marking from system call side as no
good use case could be found where it's actually needed there.
Therefore this patch removes marking for regular LRU and per-CPU
flavor. If there ever should be a need in future, the behavior could
be selected via map creation flag, but due to mentioned reason we
avoid this here.
[0] http://vger.kernel.org/bpfconf.html
Fixes:
29ba732acbee ("bpf: Add BPF_MAP_TYPE_LRU_HASH")
Fixes:
8f8449384ec3 ("bpf: Add BPF_MAP_TYPE_LRU_PERCPU_HASH")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Borkmann [Mon, 13 May 2019 23:18:55 +0000 (01:18 +0200)]
bpf: add map_lookup_elem_sys_only for lookups from syscall side
commit
c6110222c6f49ea68169f353565eb865488a8619 upstream.
Add a callback map_lookup_elem_sys_only() that map implementations
could use over map_lookup_elem() from system call side in case the
map implementation needs to handle the latter differently than from
the BPF data path. If map_lookup_elem_sys_only() is set, this will
be preferred pick for map lookups out of user space. This hook is
used in a follow-up fix for LRU map, but once development window
opens, we can convert other map types from map_lookup_elem() (here,
the one called upon BPF_MAP_LOOKUP_ELEM cmd is meant) over to use
the callback to simplify and clean up the latter.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chenbo Feng [Wed, 15 May 2019 02:42:57 +0000 (19:42 -0700)]
bpf: relax inode permission check for retrieving bpf program
commit
e547ff3f803e779a3898f1f48447b29f43c54085 upstream.
For iptable module to load a bpf program from a pinned location, it
only retrieve a loaded program and cannot change the program content so
requiring a write permission for it might not be necessary.
Also when adding or removing an unrelated iptable rule, it might need to
flush and reload the xt_bpf related rules as well and triggers the inode
permission check. It might be better to remove the write premission
check for the inode so we won't need to grant write access to all the
processes that flush and restore iptables rules.
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Thu, 23 May 2019 17:48:54 +0000 (19:48 +0200)]
Revert "selftests/bpf: skip verifier tests for unsupported program types"
This reverts commit
118d38a3577f7728278f6afda8436af05a6bec7f which is
commit
8184d44c9a577a2f1842ed6cc844bfd4a9981d8e upstream.
Tommi reports that this patch breaks the build, it's not really needed
so let's revert it.
Reported-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Sasha Levin <sashal@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Garry [Thu, 28 Mar 2019 10:08:05 +0000 (18:08 +0800)]
driver core: Postpone DMA tear-down until after devres release for probe failure
commit
0b777eee88d712256ba8232a9429edb17c4f9ceb upstream.
In commit
376991db4b64 ("driver core: Postpone DMA tear-down until after
devres release"), we changed the ordering of tearing down the device DMA
ops and releasing all the device's resources; this was because the DMA ops
should be maintained until we release the device's managed DMA memories.
However, we have seen another crash on an arm64 system when a
device driver probe fails:
hisi_sas_v3_hw 0000:74:02.0: Adding to iommu group 2
scsi host1: hisi_sas_v3_hw
BUG: Bad page state in process swapper/0 pfn:313f5
page:
ffff7e0000c4fd40 count:1 mapcount:0
mapping:
0000000000000000 index:0x0
flags: 0xfffe00000001000(reserved)
raw:
0fffe00000001000 ffff7e0000c4fd48 ffff7e0000c4fd48
0000000000000000
raw:
0000000000000000 0000000000000000 00000001ffffffff
0000000000000000
page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
bad because of flags: 0x1000(reserved)
Modules linked in:
CPU: 49 PID: 1 Comm: swapper/0 Not tainted
5.1.0-rc1-43081-g22d97fd-dirty #1433
Hardware name: Huawei D06/D06, BIOS Hisilicon D06 UEFI
RC0 - V1.12.01 01/29/2019
Call trace:
dump_backtrace+0x0/0x118
show_stack+0x14/0x1c
dump_stack+0xa4/0xc8
bad_page+0xe4/0x13c
free_pages_check_bad+0x4c/0xc0
__free_pages_ok+0x30c/0x340
__free_pages+0x30/0x44
__dma_direct_free_pages+0x30/0x38
dma_direct_free+0x24/0x38
dma_free_attrs+0x9c/0xd8
dmam_release+0x20/0x28
release_nodes+0x17c/0x220
devres_release_all+0x34/0x54
really_probe+0xc4/0x2c8
driver_probe_device+0x58/0xfc
device_driver_attach+0x68/0x70
__driver_attach+0x94/0xdc
bus_for_each_dev+0x5c/0xb4
driver_attach+0x20/0x28
bus_add_driver+0x14c/0x200
driver_register+0x6c/0x124
__pci_register_driver+0x48/0x50
sas_v3_pci_driver_init+0x20/0x28
do_one_initcall+0x40/0x25c
kernel_init_freeable+0x2b8/0x3c0
kernel_init+0x10/0x100
ret_from_fork+0x10/0x18
Disabling lock debugging due to kernel taint
BUG: Bad page state in process swapper/0 pfn:313f6
page:
ffff7e0000c4fd80 count:1 mapcount:0
mapping:
0000000000000000 index:0x0
[ 89.322983] flags: 0xfffe00000001000(reserved)
raw:
0fffe00000001000 ffff7e0000c4fd88 ffff7e0000c4fd88
0000000000000000
raw:
0000000000000000 0000000000000000 00000001ffffffff
0000000000000000
The crash occurs for the same reason.
In this case, on the really_probe() failure path, we are still clearing
the DMA ops prior to releasing the device's managed memories.
This patch fixes this issue by reordering the DMA ops teardown and the
call to devres_release_all() on the failure path.
Reported-by: Xiang Chen <chenxiang66@hisilicon.com>
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
[jpg: backport to 4.19.x and earlier]
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nigel Croxon [Tue, 16 Apr 2019 16:50:09 +0000 (09:50 -0700)]
md/raid: raid5 preserve the writeback action after the parity check
commit
b2176a1dfb518d870ee073445d27055fea64dfb8 upstream.
The problem is that any 'uptodate' vs 'disks' check is not precise
in this path. Put a "WARN_ON(!test_bit(R5_UPTODATE, &dev->flags)" on the
device that might try to kick off writes and then skip the action.
Better to prevent the raid driver from taking unexpected action *and* keep
the system alive vs killing the machine with BUG_ON.
Note: fixed warning reported by kbuild test robot <lkp@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Nigel Croxon <ncroxon@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Song Liu [Tue, 16 Apr 2019 16:34:21 +0000 (09:34 -0700)]
Revert "Don't jump to compute_result state from check_result state"
commit
a25d8c327bb41742dbd59f8c545f59f3b9c39983 upstream.
This reverts commit
4f4fd7c5798bbdd5a03a60f6269cf1177fbd11ef.
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Nigel Croxon <ncroxon@redhat.com>
Cc: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Olsa [Sat, 4 May 2019 15:15:56 +0000 (17:15 +0200)]
perf/x86/intel: Fix race in intel_pmu_disable_event()
[ Upstream commit
6f55967ad9d9752813e36de6d5fdbd19741adfc7 ]
New race in x86_pmu_stop() was introduced by replacing the
atomic __test_and_clear_bit() of cpuc->active_mask by separate
test_bit() and __clear_bit() calls in the following commit:
3966c3feca3f ("x86/perf/amd: Remove need to check "running" bit in NMI handler")
The race causes panic for PEBS events with enabled callchains:
BUG: unable to handle kernel NULL pointer dereference at
0000000000000000
...
RIP: 0010:perf_prepare_sample+0x8c/0x530
Call Trace:
<NMI>
perf_event_output_forward+0x2a/0x80
__perf_event_overflow+0x51/0xe0
handle_pmi_common+0x19e/0x240
intel_pmu_handle_irq+0xad/0x170
perf_event_nmi_handler+0x2e/0x50
nmi_handle+0x69/0x110
default_do_nmi+0x3e/0x100
do_nmi+0x11a/0x180
end_repeat_nmi+0x16/0x1a
RIP: 0010:native_write_msr+0x6/0x20
...
</NMI>
intel_pmu_disable_event+0x98/0xf0
x86_pmu_stop+0x6e/0xb0
x86_pmu_del+0x46/0x140
event_sched_out.isra.97+0x7e/0x160
...
The event is configured to make samples from PEBS drain code,
but when it's disabled, we'll go through NMI path instead,
where data->callchain will not get allocated and we'll crash:
x86_pmu_stop
test_bit(hwc->idx, cpuc->active_mask)
intel_pmu_disable_event(event)
{
...
intel_pmu_pebs_disable(event);
...
EVENT OVERFLOW -> <NMI>
intel_pmu_handle_irq
handle_pmi_common
TEST PASSES -> test_bit(bit, cpuc->active_mask))
perf_event_overflow
perf_prepare_sample
{
...
if (!(sample_type & __PERF_SAMPLE_CALLCHAIN_EARLY))
data->callchain = perf_callchain(event, regs);
CRASH -> size += data->callchain->nr;
}
</NMI>
...
x86_pmu_disable_event(event)
}
__clear_bit(hwc->idx, cpuc->active_mask);
Fixing this by disabling the event itself before setting
off the PEBS bit.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Arcari <darcari@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Lendacky Thomas <Thomas.Lendacky@amd.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes:
3966c3feca3f ("x86/perf/amd: Remove need to check "running" bit in NMI handler")
Link: http://lkml.kernel.org/r/20190504151556.31031-1-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnaldo Carvalho de Melo [Thu, 25 Apr 2019 21:36:51 +0000 (18:36 -0300)]
perf bench numa: Add define for RUSAGE_THREAD if not present
[ Upstream commit
bf561d3c13423fc54daa19b5d49dc15fafdb7acc ]
While cross building perf to the ARC architecture on a fedora 30 host,
we were failing with:
CC /tmp/build/perf/bench/numa.o
bench/numa.c: In function ‘worker_thread’:
bench/numa.c:1261:12: error: ‘RUSAGE_THREAD’ undeclared (first use in this function); did you mean ‘SIGEV_THREAD’?
getrusage(RUSAGE_THREAD, &rusage);
^~~~~~~~~~~~~
SIGEV_THREAD
bench/numa.c:1261:12: note: each undeclared identifier is reported only once for each function it appears in
[perfbuilder@
60d5802468f6 perf]$ /arc_gnu_2019.03-rc1_prebuilt_uclibc_le_archs_linux_install/bin/arc-linux-gcc --version | head -1
arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1
20190225
[perfbuilder@
60d5802468f6 perf]$
Trying to reproduce a report by Vineet, I noticed that, with just
cross-built zlib and numactl libraries, I ended up with the above
failure.
So, since RUSAGE_THREAD is available as a define, check for that and
numactl libraries, I ended up with the above failure.
So, since RUSAGE_THREAD is available as a define in the system headers,
check if it is defined in the 'perf bench numa' sources and define it if
not.
Now it builds and I have to figure out if the problem reported by Vineet
only takes place if we have libelf or some other library available.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linux-snps-arc@lists.infradead.org
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Link: https://lkml.kernel.org/n/tip-2wb4r1gir9xrevbpq7qp0amk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Al Viro [Thu, 2 May 2019 02:46:11 +0000 (22:46 -0400)]
ufs: fix braino in ufs_get_inode_gid() for solaris UFS flavour
[ Upstream commit
4e9036042fedaffcd868d7f7aa948756c48c637d ]
To choose whether to pick the GID from the old (16bit) or new (32bit)
field, we should check if the old gid field is set to 0xffff. Mainline
checks the old *UID* field instead - cut'n'paste from the corresponding
code in ufs_get_inode_uid().
Fixes:
252e211e90ce
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gary Hook [Mon, 29 Apr 2019 22:22:58 +0000 (22:22 +0000)]
x86/mm/mem_encrypt: Disable all instrumentation for early SME setup
[ Upstream commit
b51ce3744f115850166f3d6c292b9c8cb849ad4f ]
Enablement of AMD's Secure Memory Encryption feature is determined very
early after start_kernel() is entered. Part of this procedure involves
scanning the command line for the parameter 'mem_encrypt'.
To determine intended state, the function sme_enable() uses library
functions cmdline_find_option() and strncmp(). Their use occurs early
enough such that it cannot be assumed that any instrumentation subsystem
is initialized.
For example, making calls to a KASAN-instrumented function before KASAN
is set up will result in the use of uninitialized memory and a boot
failure.
When AMD's SME support is enabled, conditionally disable instrumentation
of these dependent functions in lib/string.c and arch/x86/lib/cmdline.c.
[ bp: Get rid of intermediary nostackp var and cleanup whitespace. ]
Fixes:
aca20d546214 ("x86/mm: Add support to make use of Secure Memory Encryption")
Reported-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: "dave.hansen@linux.intel.com" <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: "luto@kernel.org" <luto@kernel.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "mingo@redhat.com" <mingo@redhat.com>
Cc: "peterz@infradead.org" <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/155657657552.7116.18363762932464011367.stgit@sosrh3.amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tobin C. Harding [Tue, 30 Apr 2019 00:11:44 +0000 (10:11 +1000)]
sched/cpufreq: Fix kobject memleak
[ Upstream commit
9a4f26cc98d81b67ecc23b890c28e2df324e29f3 ]
Currently the error return path from kobject_init_and_add() is not
followed by a call to kobject_put() - which means we are leaking
the kobject.
Fix it by adding a call to kobject_put() in the error path of
kobject_init_and_add().
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tobin C. Harding <tobin@kernel.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: http://lkml.kernel.org/r/20190430001144.24890-1-tobin@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luca Coelho [Tue, 16 Apr 2019 09:57:21 +0000 (12:57 +0300)]
iwlwifi: mvm: check for length correctness in iwl_mvm_create_skb()
[ Upstream commit
de1887c064b9996ac03120d90d0a909a3f678f98 ]
We don't check for the validity of the lengths in the packet received
from the firmware. If the MPDU length received in the rx descriptor
is too short to contain the header length and the crypt length
together, we may end up trying to copy a negative number of bytes
(headlen - hdrlen < 0) which will underflow and cause us to try to
copy a huge amount of data. This causes oopses such as this one:
BUG: unable to handle kernel paging request at
ffff896be2970000
PGD
5e201067 P4D
5e201067 PUD
5e205067 PMD
16110d063 PTE
8000000162970161
Oops: 0003 [#1] PREEMPT SMP NOPTI
CPU: 2 PID: 1824 Comm: irq/134-iwlwifi Not tainted 4.19.33-04308-geea41cf4930f #1
Hardware name: [...]
RIP: 0010:memcpy_erms+0x6/0x10
Code: 90 90 90 90 eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3
0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 fe
RSP: 0018:
ffffa4630196fc60 EFLAGS:
00010287
RAX:
ffff896be2924618 RBX:
ffff896bc8ecc600 RCX:
00000000fffb4610
RDX:
00000000fffffff8 RSI:
ffff896a835e2a38 RDI:
ffff896be2970000
RBP:
ffffa4630196fd30 R08:
ffff896bc8ecc600 R09:
ffff896a83597000
R10:
ffff896bd6998400 R11:
000000000200407f R12:
ffff896a83597050
R13:
00000000fffffff8 R14:
0000000000000010 R15:
ffff896a83597038
FS:
0000000000000000(0000) GS:
ffff896be8280000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffff896be2970000 CR3:
000000005dc12002 CR4:
00000000003606e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
iwl_mvm_rx_mpdu_mq+0xb51/0x121b [iwlmvm]
iwl_pcie_rx_handle+0x58c/0xa89 [iwlwifi]
iwl_pcie_irq_rx_msix_handler+0xd9/0x12a [iwlwifi]
irq_thread_fn+0x24/0x49
irq_thread+0xb0/0x122
kthread+0x138/0x140
ret_from_fork+0x1f/0x40
Fix that by checking the lengths for correctness and trigger a warning
to show that we have received wrong data.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bjørn Mork [Wed, 24 Apr 2019 17:12:46 +0000 (19:12 +0200)]
qmi_wwan: new Wistron, ZTE and D-Link devices
[ Upstream commit
88ef66a28391ea7b624bfb7508a5b015c13b28f3 ]
Adding device entries found in vendor modified versions of this
driver. Function maps for some of the devices follow:
WNC D16Q1, D16Q5, D18Q1 LTE CAT3 module (1435:0918)
MI_00 Qualcomm HS-USB Diagnostics
MI_01 Android Debug interface
MI_02 Qualcomm HS-USB Modem
MI_03 Qualcomm Wireless HS-USB Ethernet Adapter
MI_04 Qualcomm Wireless HS-USB Ethernet Adapter
MI_05 Qualcomm Wireless HS-USB Ethernet Adapter
MI_06 USB Mass Storage Device
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1435 ProdID=0918 Rev= 2.32
S: Manufacturer=Android
S: Product=Android
S: SerialNumber=
0123456789ABCDEF
C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
WNC D18 LTE CAT3 module (1435:d182)
MI_00 Qualcomm HS-USB Diagnostics
MI_01 Androd Debug interface
MI_02 Qualcomm HS-USB Modem
MI_03 Qualcomm HS-USB NMEA
MI_04 Qualcomm Wireless HS-USB Ethernet Adapter
MI_05 Qualcomm Wireless HS-USB Ethernet Adapter
MI_06 USB Mass Storage Device
ZM8510/ZM8620/ME3960 (19d2:0396)
MI_00 ZTE Mobile Broadband Diagnostics Port
MI_01 ZTE Mobile Broadband AT Port
MI_02 ZTE Mobile Broadband Modem
MI_03 ZTE Mobile Broadband NDIS Port (qmi_wwan)
MI_04 ZTE Mobile Broadband ADB Port
ME3620_X (19d2:1432)
MI_00 ZTE Diagnostics Device
MI_01 ZTE UI AT Interface
MI_02 ZTE Modem Device
MI_03 ZTE Mobile Broadband Network Adapter
MI_04 ZTE Composite ADB Interface
Reported-by: Lars Melin <larsm17@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Zijlstra [Tue, 23 Apr 2019 19:55:59 +0000 (21:55 +0200)]
bpf: Fix preempt_enable_no_resched() abuse
[ Upstream commit
0edd6b64d1939e9e9168ff27947995bb7751db5d ]
Unless the very next line is schedule(), or implies it, one must not use
preempt_enable_no_resched(). It can cause a preemption to go missing and
thereby cause arbitrary delays, breaking the PREEMPT=y invariant.
Cc: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrey Smirnov [Wed, 24 Apr 2019 07:16:10 +0000 (00:16 -0700)]
power: supply: sysfs: prevent endless uevent loop with CONFIG_POWER_SUPPLY_DEBUG
[ Upstream commit
349ced9984ff540ce74ca8a0b2e9b03dc434b9dd ]
Fix a similar endless event loop as was done in commit
8dcf32175b4e ("i2c: prevent endless uevent loop with
CONFIG_I2C_DEBUG_CORE"):
The culprit is the dev_dbg printk in the i2c uevent handler. If
this is activated (for instance by CONFIG_I2C_DEBUG_CORE) it results
in an endless loop with systemd-journald.
This happens if user-space scans the system log and reads the uevent
file to get information about a newly created device, which seems
fair use to me. Unfortunately reading the "uevent" file uses the
same function that runs for creating the uevent for a new device,
generating the next syslog entry
Both CONFIG_I2C_DEBUG_CORE and CONFIG_POWER_SUPPLY_DEBUG were reported
in https://bugs.freedesktop.org/show_bug.cgi?id=76886 but only former
seems to have been fixed. Drop debug prints as it was done in I2C
subsystem to resolve the issue.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrew Jones [Thu, 4 Apr 2019 17:42:30 +0000 (19:42 +0200)]
KVM: arm/arm64: Ensure vcpu target is unset on reset failure
[ Upstream commit
811328fc3222f7b55846de0cd0404339e2e1e6d7 ]
A failed KVM_ARM_VCPU_INIT should not set the vcpu target,
as the vcpu target is used by kvm_vcpu_initialized() to
determine if other vcpu ioctls may proceed. We need to set
the target before calling kvm_reset_vcpu(), but if that call
fails, we should then unset it and clear the feature bitmap
while we're at it.
Signed-off-by: Andrew Jones <drjones@redhat.com>
[maz: Simplified patch, completed commit message]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kangjie Lu [Sun, 24 Mar 2019 23:18:56 +0000 (18:18 -0500)]
net: ieee802154: fix missing checks for regmap_update_bits
[ Upstream commit
22e8860cf8f777fbf6a83f2fb7127f682a8e9de4 ]
regmap_update_bits could fail and deserves a check.
The patch adds the checks and if it fails, returns its error
code upstream.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bhagavathi Perumal S [Tue, 16 Apr 2019 07:24:40 +0000 (12:54 +0530)]
mac80211: Fix kernel panic due to use of txq after free
[ Upstream commit
f1267cf3c01b12e0f843fb6a7450a7f0b2efab8a ]
The txq of vif is added to active_txqs list for ATF TXQ scheduling
in the function ieee80211_queue_skb(), but it was not properly removed
before freeing the txq object. It was causing use after free of the txq
objects from the active_txqs list, result was kernel panic
due to invalid memory access.
Fix kernel invalid memory access by properly removing txq object
from active_txqs list before free the object.
Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vitaly Kuznetsov [Wed, 20 Mar 2019 17:43:20 +0000 (18:43 +0100)]
x86: kvm: hyper-v: deal with buggy TLB flush requests from WS2012
[ Upstream commit
da66761c2d93a46270d69001abb5692717495a68 ]
It was reported that with some special Multi Processor Group configuration,
e.g:
bcdedit.exe /set groupsize 1
bcdedit.exe /set maxgroup on
bcdedit.exe /set groupaware on
for a 16-vCPU guest WS2012 shows BSOD on boot when PV TLB flush mechanism
is in use.
Tracing kvm_hv_flush_tlb immediately reveals the issue:
kvm_hv_flush_tlb: processor_mask 0x0 address_space 0x0 flags 0x2
The only flag set in this request is HV_FLUSH_ALL_VIRTUAL_ADDRESS_SPACES,
however, processor_mask is 0x0 and no HV_FLUSH_ALL_PROCESSORS is specified.
We don't flush anything and apparently it's not what Windows expects.
TLFS doesn't say anything about such requests and newer Windows versions
seem to be unaffected. This all feels like a WS2012 bug, which is, however,
easy to workaround in KVM: let's flush everything when we see an empty
flush request, over-flushing doesn't hurt.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Logan Gunthorpe [Wed, 10 Apr 2019 21:05:31 +0000 (15:05 -0600)]
PCI: Fix issue with "pci=disable_acs_redir" parameter being ignored
[ Upstream commit
d5bc73f34cc97c4b4b9202cc93182c2515076edf ]
In most cases, kmalloc() will not be available early in boot when
pci_setup() is called. Thus, the kstrdup() call that was added to fix the
__initdata bug with the disable_acs_redir parameter usually returns NULL,
so the parameter is discarded and has no effect.
To fix this, store the string that's in initdata until an initcall function
can allocate the memory appropriately. This way we don't need any
additional static memory.
Fixes:
d2fd6e81912a ("PCI: Fix __initdata issue with "pci=disable_acs_redir" parameter")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Al Viro [Wed, 10 Apr 2019 18:04:34 +0000 (14:04 -0400)]
apparmorfs: fix use-after-free on symlink traversal
[ Upstream commit
f51dcd0f621caac5380ce90fbbeafc32ce4517ae ]
symlink body shouldn't be freed without an RCU delay. Switch apparmorfs
to ->destroy_inode() and use of call_rcu(); free both the inode and symlink
body in the callback.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Al Viro [Wed, 10 Apr 2019 18:03:45 +0000 (14:03 -0400)]
securityfs: fix use-after-free on symlink traversal
[ Upstream commit
46c874419652bbefdfed17420fd6e88d8a31d9ec ]
symlink body shouldn't be freed without an RCU delay. Switch securityfs
to ->destroy_inode() and use of call_rcu(); free both the inode and symlink
body in the callback.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Sun, 7 Apr 2019 18:12:48 +0000 (11:12 -0700)]
power: supply: cpcap-battery: Fix division by zero
[ Upstream commit
dbe7208c6c4aec083571f2ec742870a0d0edbea3 ]
If called fast enough so samples do not increment, we can get
division by zero in kernel:
__div0
cpcap_battery_cc_raw_div
cpcap_battery_get_property
power_supply_get_property.part.1
power_supply_get_property
power_supply_show_property
power_supply_uevent
Fixes:
874b2adbed12 ("power: supply: cpcap-battery: Add a battery driver")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jernej Skrabec [Tue, 2 Apr 2019 21:06:21 +0000 (23:06 +0200)]
clk: sunxi-ng: nkmp: Avoid GENMASK(-1, 0)
[ Upstream commit
2abc330c514fe56c570bb1a6318b054b06a4f72e ]
Sometimes one of the nkmp factors is unused. This means that one of the
factors shift and width values are set to 0. Current nkmp clock code
generates a mask for each factor with GENMASK(width + shift - 1, shift).
For unused factor this translates to GENMASK(-1, 0). This code is
further expanded by C preprocessor to final version:
(((~0UL) - (1UL << (0)) + 1) & (~0UL >> (BITS_PER_LONG - 1 - (-1))))
or a bit simplified:
(~0UL & (~0UL >> BITS_PER_LONG))
It turns out that result of the second part (~0UL >> BITS_PER_LONG) is
actually undefined by C standard, which clearly specifies:
"If the value of the right operand is negative or is greater than or
equal to the width of the promoted left operand, the behavior is
undefined."
Additionally, compiling kernel with aarch64-linux-gnu-gcc 8.3.0 gave
different results whether literals or variables with same values as
literals were used. GENMASK with literals -1 and 0 gives zero and with
variables gives 0xFFFFFFFFFFFFFFF (~0UL). Because nkmp driver uses
GENMASK with variables as parameter, expression calculates mask as ~0UL
instead of 0. This has further consequences that LSB in register is
always set to 1 (1 is neutral value for a factor and shift is 0).
For example, H6 pll-de clock is set to 600 MHz by sun4i-drm driver, but
due to this bug ends up being 300 MHz. Additionally, 300 MHz seems to be
too low because following warning can be found in dmesg:
[ 1.752763] WARNING: CPU: 2 PID: 41 at drivers/clk/sunxi-ng/ccu_common.c:41 ccu_helper_wait_for_lock.part.0+0x6c/0x90
[ 1.763378] Modules linked in:
[ 1.766441] CPU: 2 PID: 41 Comm: kworker/2:1 Not tainted 5.1.0-rc2-next-
20190401 #138
[ 1.774269] Hardware name: Pine H64 (DT)
[ 1.778200] Workqueue: events deferred_probe_work_func
[ 1.783341] pstate:
40000005 (nZcv daif -PAN -UAO)
[ 1.788135] pc : ccu_helper_wait_for_lock.part.0+0x6c/0x90
[ 1.793623] lr : ccu_helper_wait_for_lock.part.0+0x48/0x90
[ 1.799107] sp :
ffff000010f93840
[ 1.802422] x29:
ffff000010f93840 x28:
0000000000000000
[ 1.807735] x27:
ffff800073ce9d80 x26:
ffff000010afd1b8
[ 1.813049] x25:
ffffffffffffffff x24:
00000000ffffffff
[ 1.818362] x23:
0000000000000001 x22:
ffff000010abd5c8
[ 1.823675] x21:
0000000010000000 x20:
00000000685f367e
[ 1.828987] x19:
0000000000001801 x18:
0000000000000001
[ 1.834300] x17:
0000000000000001 x16:
0000000000000000
[ 1.839613] x15:
0000000000000000 x14:
ffff000010789858
[ 1.844926] x13:
0000000000000000 x12:
0000000000000001
[ 1.850239] x11:
0000000000000000 x10:
0000000000000970
[ 1.855551] x9 :
ffff000010f936c0 x8 :
ffff800074cec0d0
[ 1.860864] x7 :
0000800067117000 x6 :
0000000115c30b41
[ 1.866177] x5 :
00ffffffffffffff x4 :
002c959300bfe500
[ 1.871490] x3 :
0000000000000018 x2 :
0000000029aaaaab
[ 1.876802] x1 :
00000000000002e6 x0 :
00000000686072bc
[ 1.882114] Call trace:
[ 1.884565] ccu_helper_wait_for_lock.part.0+0x6c/0x90
[ 1.889705] ccu_helper_wait_for_lock+0x10/0x20
[ 1.894236] ccu_nkmp_set_rate+0x244/0x2a8
[ 1.898334] clk_change_rate+0x144/0x290
[ 1.902258] clk_core_set_rate_nolock+0x180/0x1b8
[ 1.906963] clk_set_rate+0x34/0xa0
[ 1.910455] sun8i_mixer_bind+0x484/0x558
[ 1.914466] component_bind_all+0x10c/0x230
[ 1.918651] sun4i_drv_bind+0xc4/0x1a0
[ 1.922401] try_to_bring_up_master+0x164/0x1c0
[ 1.926932] __component_add+0xa0/0x168
[ 1.930769] component_add+0x10/0x18
[ 1.934346] sun8i_dw_hdmi_probe+0x18/0x20
[ 1.938443] platform_drv_probe+0x50/0xa0
[ 1.942455] really_probe+0xcc/0x280
[ 1.946032] driver_probe_device+0x54/0xe8
[ 1.950130] __device_attach_driver+0x80/0xb8
[ 1.954488] bus_for_each_drv+0x78/0xc8
[ 1.958326] __device_attach+0xd4/0x130
[ 1.962163] device_initial_probe+0x10/0x18
[ 1.966348] bus_probe_device+0x90/0x98
[ 1.970185] deferred_probe_work_func+0x6c/0xa0
[ 1.974720] process_one_work+0x1e0/0x320
[ 1.978732] worker_thread+0x228/0x428
[ 1.982484] kthread+0x120/0x128
[ 1.985714] ret_from_fork+0x10/0x18
[ 1.989290] ---[ end trace
9babd42e1ca4b84f ]---
This commit solves the issue by first checking value of the factor
width. If it is equal to 0 (unused factor), mask is set to 0, otherwise
GENMASK() macro is used as before.
Fixes:
d897ef56faf9 ("clk: sunxi-ng: Mask nkmp factors when setting register")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Steffen Klassert [Tue, 26 Feb 2019 06:04:50 +0000 (07:04 +0100)]
xfrm4: Fix uninitialized memory read in _decode_session4
[ Upstream commit
8742dc86d0c7a9628117a989c11f04a9b6b898f3 ]
We currently don't reload pointers pointing into skb header
after doing pskb_may_pull() in _decode_session4(). So in case
pskb_may_pull() changed the pointers, we read from random
memory. Fix this by putting all the needed infos on the
stack, so that we don't need to access the header pointers
after doing pskb_may_pull().
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin Willi [Tue, 26 Mar 2019 12:20:43 +0000 (13:20 +0100)]
xfrm: Honor original L3 slave device in xfrmi policy lookup
[ Upstream commit
025c65e119bf58b610549ca359c9ecc5dee6a8d2 ]
If an xfrmi is associated to a vrf layer 3 master device,
xfrm_policy_check() fails after traffic decapsulation. The input
interface is replaced by the layer 3 master device, and hence
xfrmi_decode_session() can't match the xfrmi anymore to satisfy
policy checking.
Extend ingress xfrmi lookup to honor the original layer 3 slave
device, allowing xfrm interfaces to operate within a vrf domain.
Fixes:
f203b76d7809 ("xfrm: Add virtual xfrm interfaces")
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sabrina Dubroca [Mon, 25 Mar 2019 13:30:00 +0000 (14:30 +0100)]
esp4: add length check for UDP encapsulation
[ Upstream commit
8dfb4eba4100e7cdd161a8baef2d8d61b7a7e62e ]
esp_output_udp_encap can produce a length that doesn't fit in the 16
bits of a UDP header's length field. In that case, we'll send a
fragmented packet whose length is larger than IP_MAX_MTU (resulting in
"Oversized IP packet" warnings on receive) and with a bogus UDP
length.
To prevent this, add a length check to esp_output_udp_encap and return
-EMSGSIZE on failure.
This seems to be older than git history.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cong Wang [Fri, 22 Mar 2019 23:26:19 +0000 (16:26 -0700)]
xfrm: clean up xfrm protocol checks
[ Upstream commit
dbb2483b2a46fbaf833cfb5deb5ed9cace9c7399 ]
In commit
6a53b7593233 ("xfrm: check id proto in validate_tmpl()")
I introduced a check for xfrm protocol, but according to Herbert
IPSEC_PROTO_ANY should only be used as a wildcard for lookup, so
it should be removed from validate_tmpl().
And, IPSEC_PROTO_ANY is expected to only match 3 IPSec-specific
protocols, this is why xfrm_state_flush() could still miss
IPPROTO_ROUTING, which leads that those entries are left in
net->xfrm.state_all before exit net. Fix this by replacing
IPSEC_PROTO_ANY with zero.
This patch also extracts the check from validate_tmpl() to
xfrm_id_proto_valid() and uses it in parse_ipsecrequest().
With this, no other protocols should be added into xfrm.
Fixes:
6a53b7593233 ("xfrm: check id proto in validate_tmpl()")
Reported-by: syzbot+0bf0519d6e0de15914fe@syzkaller.appspotmail.com
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jeremy Sowden [Tue, 19 Mar 2019 15:39:20 +0000 (15:39 +0000)]
vti4: ipip tunnel deregistration fixes.
[ Upstream commit
5483844c3fc18474de29f5d6733003526e0a9f78 ]
If tunnel registration failed during module initialization, the module
would fail to deregister the IPPROTO_COMP protocol and would attempt to
deregister the tunnel.
The tunnel was not deregistered during module-exit.
Fixes:
dd9ee3444014e ("vti4: Fix a ipip packet processing bug in 'IPCOMP' virtual tunnel")
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>