phy: qcom-qmp: drop special QMP V2 PCIE gen3 defines

Replace separate defines for QMP V2 PHY for PCIe gen3 ports. They are
equivalent to the QSERDES_V4_ symbols.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220705094320.1313312-6-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-pcie: split pcs_misc region for ipq6018 pcie gen3

Follow the example of other PCIe PHYs and use separate pcs_misc region
to access PCS_PCIE_* resources.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220705094320.1313312-5-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-combo,usb: add support for separate PCS_USB region

Different QMP USB PHYs might have different offset from PCS to PCS_USB
register space, but the same PCS_USB register layout. Add separate
PCS_USB region space and merge related PCS_USB definitions.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220705094320.1313312-4-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-ufs: remove spurious register write in the msm8996 table

The msm8996_ufs_serdes_tbl table contains write to
QPHY_POWER_DOWN_CONTROL, however this register doesn't belong to the
QSERDES register space. Also the PHY power down is already handled in
the qcom_qmp_phy_ufs_com_init(). Drop this entry completely.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220705094320.1313312-3-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: fix the QSERDES_V5_COM_CMN_MODE register

Change QSERDES_V5_COM_CMN_MODE to be defined to 0x1a0 rather than 0x1a4.
The only user of this register name (sm8450_qmp_gen4x2_pcie_serdes_tbl)
should use the 0x1a0 register, as stated in the downstream dtsi tree.

Fixes: 2c91bf6bf290 ("phy: qcom-qmp: Add SM8450 PCIe1 PHY support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220705094320.1313312-2-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

drm/msm/dp: delete vdda regulator related functions from eDP/DP controller

Vdda regulators are related to both eDP and DP phy so that it should be
managed at eDP and DP phy driver instead of controller. This patch removes
vdda regulators related functions out of eDP/DP controller.

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/1657038556-2231-4-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: add regulator_set_load to dp phy

This patch add regulator_set_load() before enable regulator at
DP phy driver.

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/1657038556-2231-3-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-edp: add regulator_set_load to edp phy

This patch add regulator_set_load() before enable regulator at
eDP phy driver.

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1657038556-2231-2-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: amlogic: Add G12A Analog MIPI D-PHY driver

The Amlogic G12A SoCs embeds an Analog MIPI D-PHY used to communicate with DSI
panels.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220705075650.3165348-3-narmstrong@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: add Amlogic G12A Analog MIPI D-PHY bindings

The Amlogic G12A SoCs embeds an Analog MIPI D-PHY to communicate with DSI
panels, this adds the bindings.

This Analog D-PHY works with a separate Digital MIPI D-PHY.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220705075650.3165348-2-narmstrong@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: phy-brcm-usb: drop unexpected word "the" in the comments

there is an unexpected word "the" in the comments that need to be dropped

file: ./drivers/phy/broadcom/phy-brcm-usb-init.c
line: 864
 * Make sure the the second and third memory controller
changed to
 * Make sure the second and third memory controller

Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220621122401.115500-1-jiangjian@cdjrlc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: rockchip-inno-usb2: Sync initial otg state

The initial otg state for the phy defaults to device mode. The actual
state isn't detected until an ID IRQ fires. Fix this by syncing the ID
state during initialization.

Fixes: 51a9b2c03dd3 ("phy: rockchip-inno-usb2: Handle ID IRQ")
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220622003140.30365-1-pgwipeout@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-pcie: add IPQ8074 PCIe Gen3 QMP PHY support

IPQ8074 has 2 different single lane PCIe PHY-s, one Gen2 and one Gen3.
Gen2 one is already supported, so add the support for the Gen3 one.
It uses the same register layout as IPQ6018.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220621195512.1760362-3-robimarko@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: qcom,qmp: add IPQ8074 PCIe Gen3 PHY binding

IPQ8074 has 2 different single lane PCIe PHY-s, one Gen2 and one Gen3.
Gen2 one is already supported, document the bindings for the Gen3 one.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220621195512.1760362-2-robimarko@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-pcie: make pipe clock rate configurable

IPQ8074 Gen3 PCIe PHY uses 250MHz as the pipe clock rate instead of 125MHz
like every other PCIe QMP PHY does, so make it configurable as part of the
qmp_phy_cfg.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220621195512.1760362-1-robimarko@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: clean up hex defines

Use lower case hex consistently for define values.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220609120338.4080-4-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: clean up define alignment

Clean up the QMP defines by removing some stray white space and making
sure values are aligned.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220609120338.4080-3-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: clean up v4 and v5 define order

Clean up the QMP v4 and v5 defines by moving a few entries that were out
of order.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220609120338.4080-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-usb: clean up pipe clock handling

Clean up the pipe clock handling by using dev_err_probe() to handle
probe deferral and dropping the obsolete comment that claimed that the
pipe clock was optional for some other PHY types.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220623113314.29761-4-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-pcie-msm8996: drop obsolete pipe clock type check

Drop the obsolete pipe clock handling which was used to treat the pipe
clock as optional for types other than PCIe and USB and which is no
longer needed since splitting the PHY driver.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220623113314.29761-3-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-pcie: drop obsolete pipe clock type check

Drop the obsolete pipe clock handling which was used to treat the pipe
clock as optional for types other than PCIe and USB and which is no
longer needed since splitting the PHY driver.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220623113314.29761-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: phy-mtk-dp: Add driver for DP phy

This is a new driver that supports the integrated DisplayPort phy for
mediatek SoCs, especially the mt8195. The phy is integrated into the
DisplayPort controller and will be created by the mtk-dp driver. This
driver expects a struct regmap to be able to work on the same registers
as the DisplayPort controller. It sets the device data to be the struct
phy so that the DisplayPort controller can easily work with it.

The driver does not have any devicetree bindings because the datasheet
does not list the controller and the phy as distinct units.

The interaction with the controller can be covered by the configure
callback of the phy framework and its displayport parameters.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
[Bo-Chen: Modify reviewers' comments.]
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220624062725.4095-1-rex-bc.chen@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: cdns-dphy: Add support for DPHY TX on J721e

Add support new compatible for dphy-tx on j721e
and implement dphy ops required.

Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220623125433.18467-4-r-ravikumar@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: cdns-dphy: Add band config for dphy tx

Add support for band ctrl config for dphy tx.

Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220623125433.18467-3-r-ravikumar@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: dt-bindings: cdns,dphy: Add compatible for dphy on j721e

Add compatible to support dphy tx on j721e

Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220623125433.18467-2-r-ravikumar@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: rockchip-inno-usb2: Prevent incorrect error on probe

If a phy supply is designated but isn't available at probe time, an
EPROBE_DEFER is returned. Use dev_err_probe to prevent this from
incorrectly printing during boot.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20220625212711.558495-1-pgwipeout@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: dphy: drop unexpected word "the" in the comments

there is an unexpected word "the" in the comments that need to be dropped

file: ./drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c
line: 139
* when in RxULPS check state, after the the logic enable the analog,
changed to
* when in RxULPS check state, after the logic enable the analog,

Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220621120015.113682-1-jiangjian@cdjrlc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: tegra: Add PCIe PIPE2UPHY support for Tegra234

Synopsys DesignWare core based PCIe controllers in Tegra234 SoC
interface with Universal PHY (UPHY) module through a PIPE2UPHY (P2U)
module. For each PCIe lane of a controller, there is a P2U unit
instantiated at hardware level. This driver provides support for the
programming required for each P2U that is going to be used for a PCIe
controller.

Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://lore.kernel.org/r/20220629060435.25297-9-vidyas@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: PHY: P2U: Add support for Tegra234 P2U block

Add support for Tegra234 P2U (PIPE to UPHY) module block which is a glue
module instantiated once for each PCIe lane between Synopsys DesignWare
core based PCIe IP and Universal PHY block.

Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220629060435.25297-2-vidyas@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: mediatek: Add PCIe PHY driver

Add PCIe GEN3 PHY driver support on MediaTek chipsets.

Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioachino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220617070246.20142-3-jianjun.wang@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: mediatek: Add YAML schema for PCIe PHY

Add YAML schema documentation for PCIe PHY on MediaTek chipsets.

Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220617070246.20142-2-jianjun.wang@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: ti: tusb1210: Don't check for write errors when powering on

On some platforms, like Intel Merrifield, the writing values during power on
may timeout:

   tusb1210 dwc3.0.auto.ulpi: error -110 writing val 0x41 to reg 0x80
   phy phy-dwc3.0.auto.ulpi.0: phy poweron failed --> -110
   dwc3 dwc3.0.auto: error -ETIMEDOUT: failed to initialize core
   dwc3: probe of dwc3.0.auto failed with error -110

which effectively fails the probe of the USB controller.
Drop the check as it was before the culprit commit (see Fixes tag).

Fixes: 09a3512681b3 ("phy: ti: tusb1210: Improve ulpi_read()/_write() error checking")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Ferry Toth <fntoth@gmail.com>
Link: https://lore.kernel.org/r/20220613160848.82746-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

MAINTAINERS: add include/dt-bindings/phy to GENERIC PHY FRAMEWORK

Maintainers of the directory Documentation/devicetree/bindings/phy
are also the maintainers of the corresponding directory
include/dt-bindings/phy.

Add the file entry for include/dt-bindings/phy to the appropriate
section in MAINTAINERS.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20220613122621.18397-1-lukas.bulwahn@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: fix PCIe PHY support

Replace init/exit ops with power_on/power_off which should be used for
the PCIe PHYs to fix PHY initialization.

Fixes: da07a06b905f ("phy: qcom-qmp-pcie: drop support for non-PCIe PHY types")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220610185542.3662484-3-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: fix msm8996 PCIe PHY support

Replace init/exit ops with power_on/power_off which should be used for
the PCIe PHYs to fix PHY initialization.

Fixes: f575ac2d64e7 ("phy: qcom-qmp-pcie-msm8996: drop support for non-PCIe PHY types")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220610185542.3662484-2-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: ti: phy-j721e-wiz: use OF data for device specific data

Move device specific data into OF data structure so it
is easier to maintain and we can get rid of if statements.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Matt Ranostay <mranostay@ti.com>
Link: https://lore.kernel.org/r/20220526064121.27625-1-rogerq@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: renesas: usb3-phy: Spelling s/funcional/functional/

Fix a misspelling of the word "functional".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/3da9bd360e1c83007af0e0e90fa4e6c2b50fdab3.1652100633.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: samsung-ufs: add support for FSD ufs phy driver

Adds support for Tesla Full Self-Driving (FSD) ufs phy driver.
This SoC has different cdr lock status offset.

Signed-off-by: Bharat Uppal <bharat.uppal@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220610104119.66401-4-alim.akhtar@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: samsung-ufs: move cdr offset to drvdata

Move CDR lock offset to drv data so that it can be extended for other SoCs
which are having CDR lock at different register offset.

Signed-off-by: Bharat Uppal <bharat.uppal@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220610104119.66401-3-alim.akhtar@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: Add FSD UFS PHY bindings

Add tesla,fsd-ufs-phy compatible for Tesla Full Self-Driving (FSD) SoC.

Signed-off-by: Bharat Uppal <bharat.uppal@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220610104119.66401-2-alim.akhtar@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: List supplies for qcom,edp-phy

We're supposed to list the supplies in the dt bindings but there are
none in the eDP PHY bindings.

Looking at the driver in Linux, I can see that there seem to be two
relevant supplies: "vdda-phy" and "vdda-pll". Let's add those to the
bindings.

NOTE: from looking at the Qualcomm datasheet for sc7280, it's not
immediately clear how to figure out how to fill in these supplies. The
only two eDP related supplies are simply described as "power for eDP
0.9V circuits" and "power for eDP 1.2V circuits". From guessing and
from comparing how a similar PHY is hooked up on other similar
Qualcomm boards, I'll make the educated guess that the 1.2V supply
goes to "vdda-phy" and the 0.9V supply goes to "vdda-pll" and I'll use
that in the example here.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Link: https://lore.kernel.org/r/20220425140619.2.Iae013f0ff4599294189f3a6e91376fad137bbabf@changeid
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-usb: use bulk reset_control API

Switch qcom-qmp-usb driver to use reset_control_bulk_assert / _deassert
functions rather than hardcoding the loops in the driver itself.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-31-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-pcie-msm8996: use bulk reset_control API

Switch qcom-qmp-pcie-msm8996 driver to use reset_control_bulk_assert /
_deassert functions rather than hardcoding the loops in the driver
itself.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-30-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-pcie: use bulk reset_control API

Switch qcom-qmp-pcie driver to use reset_control_bulk_assert / _deassert
functions rather than hardcoding the loops in the driver itself.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-29-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-combo: use bulk reset_control API

Switch qcom-qmp-combo driver to use reset_control_bulk_assert / _deassert
functions rather than hardcoding the loops in the driver itself.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-28-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-usb: drop multi-PHY support

Each USB QMP PHY device provides just a single UFS PHY. Drop support
for handling multiple child PHYs. Use phy->init_count to check if the
PHY was initialized rather than duplicating this count.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-27-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-ufs: drop multi-PHY support

Each UFS QMP PHY device provides just a single UFS PHY. Drop support
for handling multiple child PHYs.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-26-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-pcie: drop multi-PHY support

Each PCIe QMP PHY device provides just a single PCIe PHY. Drop support
for handling multiple child PHYs.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-25-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-usb: cleanup the driver

Remove the conditionals and options that are not used by any of USB PHY
devices.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-24-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-ufs: cleanup the driver

Remove the conditionals and options that are not used by any of UFS PHY
devices.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-23-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-pcie-msm8996: cleanup the driver

Remove the conditionals and options that are not used by the MSM8996
PCIe PHY device. Hardcode has_lane_rst and has_phy_com_ctrl as this is
the case for this PHY.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-22-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-pcie: cleanup the driver

Remove the conditionals and options that are not used by any of PCIe PHY
devices.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-21-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-combo: cleanup the driver

Remove the conditionals and options that are not used by any of combo
USB+DP PHY devices.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-20-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-usb: drop support for non-USB PHY types

Drop remaining support for PHY types other than USB.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-19-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-ufs: drop support for non-UFS PHY types

Drop remaining support for PHY types other than UFS.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-18-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-pcie-msm8996: drop support for non-PCIe PHY types

Drop remaining support for PHY types other than PCIe.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-17-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-pcie: drop support for non-PCIe PHY types

Drop remaining support for PHY types other than PCIe.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-16-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-combo: drop support for PCIe,UFS PHY types

Drop remaining support for unused PHY types (PCIe, UFS).

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-15-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: drop old QMP PHY driver source

As we have switched to the new (split) QMP PHY driver, drop the old
monolithic QMP driver source.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-14-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: switch to new split QMP PHY driver

Use new split QMP PHY driver and remove all monolith phy-qcom-qmp
driver.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-13-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-usb: change symbol prefix to qcom_qmp_phy_usb

Change all symbol names to start with qcom_qmp_phy_usb_ rather than old
qcom_qmp_phy_

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-12-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-ufs: change symbol prefix to qcom_qmp_phy_ufs

Change all symbol names to start with qcom_qmp_phy_ufs_ rather than old
qcom_qmp_phy_

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-11-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-pcie: change symbol prefix to qcom_qmp_phy_pcie_msm8996

Change all symbol names to start with qcom_qmp_phy_pcie_msm8996_ rather
than old qcom_qmp_phy_.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-10-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-pcie: change symbol prefix to qcom_qmp_phy_pcie

Change all symbol names to start with qcom_qmp_phy_pcie_ rather than old
qcom_qmp_phy_

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-9-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-combo: change symbol prefix to qcom_qmp_phy_combo

Change all symbol names to start with qcom_qmp_phy_combo_ rather than old
qcom_qmp_phy_

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-8-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-combo: drop all non-combo compatibles support

Drop support for all non-USB+DP compatibles from the new qmp-combo
driver. Currently this will result in duplication (both in terms of code
and in terms of config tables) with USB PHY support. This will be sorted
out later, after fixing the combo PHY init/reinit issues.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-7-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-usb: drop all non-USB compatibles support

Drop support for all non-USB compatibles from the new qmp-usb driver.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-6-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-ufs: drop all non-UFS compatibles support

Drop support for all non-UFS compatibles from the new qmp-ufs driver.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-5-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-pcie-msm8996: drop all compatibles except msm8996-pcie-phy

Drop support for all compatibles from the new qmp-pcie driver except the
qcom,msm8996-qmp-pcie-phy. This PHY differs from the rest of PCIe PHYs,
so it warrants a separate device driver.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-4-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp-pcie: drop all non-PCIe compatibles support

Drop support for all non-PCIe compatibles from the new qmp-pcie driver.
The MSM8996 compat is also removed, it is going to be handled by a
separate driver.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-3-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: qcom-qmp: create copies of QMP PHY driver

In order to split and cleanup the single monstrous QMP PHY driver,
create blind copies of the current file. They will be used for:
- PCIe (and a separate msm8996 PCIe PHY driver)
- UFS
- USB
- Combo DP + USB

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220607213203.2819885-2-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: mediatek,tphy: add MT8365 SoC bindings

Add binding documentation for the MT8365 SoC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220531135026.238475-13-fparent@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: mediatek,dsi-phy: Add MT8365 SoC bindings

Add binding documentation for the MT8365 SoC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220531135026.238475-12-fparent@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: samsung: exynosautov9-ufs: correct TSRV register configurations

For exynos auto v9's UFS MPHY, We should use 0x50 offset of TSRV register
configurations. So, it must be

s/PHY_TRSV_REG_CFG/PHY_TRSV_REG_CFG_AUTOV9/g

Fixes: d64519249e1d ("phy: samsung-ufs: support exynosauto ufs phy driver")
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220603050536.61957-1-chanho61.park@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: mxs-usb-phy: Add i.MX8DXL compatible string

Add compatible for i.MX8DXL USB PHY.

Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220607111625.1845393-9-abel.vesa@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: samsung: ufs: support secondary ufs phy

To support secondary ufs phy device, we need to get an offset for phy
isolation from the syscon DT node. If the first index argument of the
node is existing, we can read the offset value and set it as isol->offset.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220607072907.127000-6-chanho61.park@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: samsung: ufs: remove drvdata from struct samsung_ufs_phy

To change an offset of pmu_isol, we need to store its data instead of
having drvdata's pointer. The definition of the pmu_isol structure
should be extracted from samsung_ufs_phy_drvdata and rename the name
with samsung_ufs_phy_ prefix.

Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220607072907.127000-5-chanho61.park@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: samsung: ufs: constify samsung_ufs_phy_cfg

Put const qualifier of samsung_ufs_phy_cfg pointer because they will
not be changed from drvdata.

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220607072907.127000-4-chanho61.park@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: samsung: ufs: rename cfg to cfgs for clarification

Rename **cfg to **cfgs to clarify the naming.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220607072907.127000-3-chanho61.park@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: phy: samsung,ufs-phy: make pmu-syscon as phandle-array

To support secondary ufs phy devices, we need to get an offset value
from pmu-syscon.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20220607072907.127000-2-chanho61.park@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Linux 5.19-rc1

Merge tag 'pull-work.fd-fixes' of git://git./linux/kernel/git/viro/vfs

Pull file descriptor fix from Al Viro:
 "Fix for breakage in #work.fd this window"

* tag 'pull-work.fd-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix the breakage in close_fd_get_file() calling conventions change

Merge tag 'mm-hotfixes-stable-2022-06-05' of git://git./linux/kernel/git/akpm/mm

Pull mm hotfixes from Andrew Morton:
 "Fixups for various recently-added and longer-term issues and a few
  minor tweaks:

   - fixes for material merged during this merge window

   - cc:stable fixes for more longstanding issues

   - minor mailmap and MAINTAINERS updates"

* tag 'mm-hotfixes-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/oom_kill.c: fix vm_oom_kill_table[] ifdeffery
  x86/kexec: fix memory leak of elf header buffer
  mm/memremap: fix missing call to untrack_pfn() in pagemap_range()
  mm: page_isolation: use compound_nr() correctly in isolate_single_pageblock()
  mm: hugetlb_vmemmap: fix CONFIG_HUGETLB_PAGE_FREE_VMEMMAP_DEFAULT_ON
  MAINTAINERS: add maintainer information for z3fold
  mailmap: update Josh Poimboeuf's email

Merge tag 'mm-nonmm-stable-2022-06-05' of git://git./linux/kernel/git/akpm/mm

Pull delay-accounting update from Andrew Morton:
 "A single featurette for delay accounting.

  Delayed a bit because, unusually, it had dependencies on both the
  mm-stable and mm-nonmm-stable queues"

* tag 'mm-nonmm-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  delayacct: track delays from write-protect copy

bluetooth: don't use bitmaps for random flag accesses

The bluetooth code uses our bitmap infrastructure for the two bits (!)
of connection setup flags, and in the process causes odd problems when
it converts between a bitmap and just the regular values of said bits.

It's completely pointless to do things like bitmap_to_arr32() to convert
a bitmap into a u32.  It shoudln't have been a bitmap in the first
place.  The reason to use bitmaps is if you have arbitrary number of
bits you want to manage (not two!), or if you rely on the atomicity
guarantees of the bitmap setting and clearing.

The code could use an "atomic_t" and use "atomic_or/andnot()" to set and
clear the bit values, but considering that it then copies the bitmaps
around with "bitmap_to_arr32()" and friends, there clearly cannot be a
lot of atomicity requirements.

So just use a regular integer.

In the process, this avoids the warnings about erroneous use of
bitmap_from_u64() which were triggered on 32-bit architectures when
conversion from a u64 would access two words (and, surprise, surprise,
only one word is needed - and indeed overkill - for a 2-bit bitmap).

That was always problematic, but the compiler seems to notice it and
warn about the invalid pattern only after commit 0a97953fd221 ("lib: add
bitmap_{from,to}_arr64") changed the exact implementation details of
'bitmap_from_u64()', as reported by Sudip Mukherjee and Stephen Rothwell.

Fixes: fe92ee6425a2 ("Bluetooth: hci_core: Rework hci_conn_params flags")
Link: https://lore.kernel.org/all/YpyJ9qTNHJzz0FHY@debian/
Link: https://lore.kernel.org/all/20220606080631.0c3014f2@canb.auug.org.au/
Link: https://lore.kernel.org/all/20220605162537.1604762-1-yury.norov@gmail.com/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fix the breakage in close_fd_get_file() calling conventions change

It used to grab an extra reference to struct file rather than
just transferring to caller the one it had removed from descriptor
table.  New variant doesn't, and callers need to be adjusted.

Reported-and-tested-by: syzbot+47dd250f527cb7bebf24@syzkaller.appspotmail.com
Fixes: 6319194ec57b ("Unify the primitives for file descriptor closing")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Merge tag 'x86-urgent-2022-06-05' of git://git./linux/kernel/git/tip/tip

Pull x86 SGX fix from Thomas Gleixner:
 "A single fix for x86/SGX to prevent that memory which is allocated for
  an SGX enclave is accounted to the wrong memory control group"

* tag 'x86-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sgx: Set active memcg prior to shmem allocation

Merge tag 'x86-mm-2022-06-05' of git://git./linux/kernel/git/tip/tip

Pull x86 mm cleanup from Thomas Gleixner:
 "Use PAGE_ALIGNED() instead of open coding it in the x86/mm code"

* tag 'x86-mm-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Use PAGE_ALIGNED(x) instead of IS_ALIGNED(x, PAGE_SIZE)

Merge tag 'x86-microcode-2022-06-05' of git://git./linux/kernel/git/tip/tip

Pull x86 microcode updates from Thomas Gleixner:

 - Disable late microcode loading by default. Unless the HW people get
   their act together and provide a required minimum version in the
   microcode header for making a halfways informed decision its just
   lottery and broken.

 - Warn and taint the kernel when microcode is loaded late

 - Remove the old unused microcode loader interface

 - Remove a redundant perf callback from the microcode loader

* tag 'x86-microcode-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode: Remove unnecessary perf callback
  x86/microcode: Taint and warn on late loading
  x86/microcode: Default-disable late loading
  x86/microcode: Rip out the OLD_INTERFACE

Merge tag 'x86-cleanups-2022-06-05' of git://git./linux/kernel/git/tip/tip

Pull x86 cleanups from Thomas Gleixner:
 "A set of small x86 cleanups:

   - Remove unused headers in the IDT code

   - Kconfig indendation and comment fixes

   - Fix all 'the the' typos in one go instead of waiting for bots to
     fix one at a time"

* tag 'x86-cleanups-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Fix all occurences of the "the the" typo
  x86/idt: Remove unused headers
  x86/Kconfig: Fix indentation of arch/x86/Kconfig.debug
  x86/Kconfig: Fix indentation and add endif comments to arch/x86/Kconfig

Merge tag 'x86-boot-2022-06-05' of git://git./linux/kernel/git/tip/tip

Pull x86 boot update from Thomas Gleixner:
 "Use strlcpy() instead of strscpy() in arch_setup()"

* tag 'x86-boot-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/setup: Use strscpy() to replace deprecated strlcpy()

Merge tag 'timers-core-2022-06-05' of git://git./linux/kernel/git/tip/tip

Pull clockevent/clocksource updates from Thomas Gleixner:

 - Device tree bindings for MT8186

 - Tell the kernel that the RISC-V SBI timer stops in deeper power
   states

 - Make device tree parsing in sp804 more robust

 - Dead code removal and tiny fixes here and there

 - Add the missing SPDX identifiers

* tag 'timers-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value
  clocksource/drivers/timer-ti-dm: Remove unnecessary NULL check
  clocksource/drivers/timer-sun5i: Convert to SPDX identifier
  clocksource/drivers/timer-sun4i: Convert to SPDX identifier
  clocksource/drivers/pistachio: Convert to SPDX identifier
  clocksource/drivers/orion: Convert to SPDX identifier
  clocksource/drivers/lpc32xx: Convert to SPDX identifier
  clocksource/drivers/digicolor: Convert to SPDX identifier
  clocksource/drivers/armada-370-xp: Convert to SPDX identifier
  clocksource/drivers/mips-gic-timer: Convert to SPDX identifier
  clocksource/drivers/jcore: Convert to SPDX identifier
  clocksource/drivers/bcm_kona: Convert to SPDX identifier
  clocksource/drivers/sp804: Avoid error on multiple instances
  clocksource/drivers/riscv: Events are stopped during CPU suspend
  clocksource/drivers/ixp4xx: Drop boardfile probe path
  dt-bindings: timer: Add compatible for Mediatek MT8186

Merge tag 'sched-urgent-2022-06-05' of git://git./linux/kernel/git/tip/tip

Pull scheduler fix from Thomas Gleixner:
 "Fix the fallout of sysctl code move which placed the init function
  wrong"

* tag 'sched-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/autogroup: Fix sysctl move

Merge tag 'perf-urgent-2022-06-05' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Thomas Gleixner:

  - Make the ICL event constraints match reality

  - Remove a unused local variable

* tag 'perf-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Remove unused local variable
  perf/x86/intel: Fix event constraints for ICL

Merge tag 'perf-core-2022-06-05' of git://git./linux/kernel/git/tip/tip

Pull perf fixlet from Thomas Gleixner:
 "Trivial indentation fix in Kconfig"

* tag 'perf-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/Kconfig: Fix indentation in the Kconfig file

Merge tag 'objtool-urgent-2022-06-05' of git://git./linux/kernel/git/tip/tip

Pull objtool fixes from Thomas Gleixner:

 - Handle __ubsan_handle_builtin_unreachable() correctly and treat it as
   noreturn

 - Allow architectures to select uaccess validation

 - Use the non-instrumented bit test for test_cpu_has() to prevent
   escape from non-instrumentable regions

 - Use arch_ prefixed atomics for JUMP_LABEL=n builds to prevent escape
   from non-instrumentable regions

 - Mark a few tiny inline as __always_inline to prevent GCC from
   bringing them out of line and instrumenting them

 - Mark the empty stub context_tracking_enabled() as always inline as
   GCC brings them out of line and instruments the empty shell

 - Annotate ex_handler_msr_mce() as dead end

* tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/extable: Annotate ex_handler_msr_mce() as a dead end
  context_tracking: Always inline empty stubs
  x86: Always inline on_thread_stack() and current_top_of_stack()
  jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds
  x86/cpu: Elide KCSAN for cpu_has() and friends
  objtool: Mark __ubsan_handle_builtin_unreachable() as noreturn
  objtool: Add CONFIG_HAVE_UACCESS_VALIDATION

Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
 "Mostly small bug fixes plus other trivial updates.

  The major change of note is moving ufs out of scsi and a minor update
  to lpfc vmid handling"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
  scsi: qla2xxx: Remove unused 'ql_dm_tgt_ex_pct' parameter
  scsi: qla2xxx: Remove setting of 'req' and 'rsp' parameters
  scsi: mpi3mr: Fix kernel-doc
  scsi: lpfc: Add support for ATTO Fibre Channel devices
  scsi: core: Return BLK_STS_TRANSPORT for ALUA transitioning
  scsi: sd_zbc: Prevent zone information memory leak
  scsi: sd: Fix potential NULL pointer dereference
  scsi: mpi3mr: Rework mrioc->bsg_device model to fix warnings
  scsi: myrb: Fix up null pointer access on myrb_cleanup()
  scsi: core: Unexport scsi_bus_type
  scsi: sd: Don't call blk_cleanup_disk() in sd_probe()
  scsi: ufs: ufshcd: Delete unnecessary NULL check
  scsi: isci: Fix typo in comment
  scsi: pmcraid: Fix typo in comment
  scsi: smartpqi: Fix typo in comment
  scsi: qedf: Fix typo in comment
  scsi: esas2r: Fix typo in comment
  scsi: storvsc: Fix typo in comment
  scsi: ufs: Split the drivers/scsi/ufs directory
  scsi: qla1280: Remove redundant variable
  ...

Merge tag 'hte/for-5.19-rc1' of git://git./linux/kernel/git/tegra/linux

Pull hardware timestamping subsystem from Thierry Reding:
 "This contains the new HTE (hardware timestamping engine) subsystem
  that has been in the works for a couple of months now.

  The infrastructure provided allows for drivers to register as hardware
  timestamp providers, while consumers will be able to request events
  that they are interested in (such as GPIOs and IRQs) to be timestamped
  by the hardware providers.

  Note that this currently supports only one provider, but there seems
  to be enough interest in this functionality and we expect to see more
  drivers added once this is merged"

[ Linus Walleij mentions the Intel PMC in the Elkhart and Tiger Lake
  platforms as another future timestamp provider ]

* tag 'hte/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: timestamp: Correct id path
  dt-bindings: Renamed hte directory to timestamp
  hte: Uninitialized variable in hte_ts_get()
  hte: Fix off by one in hte_push_ts_ns()
  hte: Fix possible use-after-free in tegra_hte_test_remove()
  hte: Remove unused including <linux/version.h>
  MAINTAINERS: Add HTE Subsystem
  hte: Add Tegra HTE test driver
  tools: gpio: Add new hardware clock type
  gpiolib: cdev: Add hardware timestamp clock type
  gpio: tegra186: Add HTE support
  gpiolib: Add HTE support
  dt-bindings: Add HTE bindings
  hte: Add Tegra194 HTE kernel provider
  drivers: Add hardware timestamp engine (HTE) subsystem
  Documentation: Add HTE subsystem guide

Merge tag 'kbuild-v5.19-3' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild updates from Masahiro Yamada:

 - Fix build regressions for parisc, csky, nios2, openrisc

 - Simplify module builds for CONFIG_LTO_CLANG and CONFIG_X86_KERNEL_IBT

 - Remove arch/parisc/nm, which was presumably a workaround for old
   tools

 - Check the odd combination of EXPORT_SYMBOL and 'static' precisely

 - Make external module builds robust against "too long argument error"

 - Support j, k keys for moving the cursor in nconfig

* tag 'kbuild-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
  kbuild: Allow to select bash in a modified environment
  scripts: kconfig: nconf: make nconfig accept jk keybindings
  modpost: use fnmatch() to simplify match()
  modpost: simplify mod->name allocation
  kbuild: factor out the common objtool arguments
  kbuild: move vmlinux.o link to scripts/Makefile.vmlinux_o
  kbuild: clean .tmp_* pattern by make clean
  kbuild: remove redundant cleanups in scripts/link-vmlinux.sh
  kbuild: rebuild multi-object modules when objtool is updated
  kbuild: add cmd_and_savecmd macro
  kbuild: make *.mod rule robust against too long argument error
  kbuild: make built-in.a rule robust against too long argument error
  kbuild: check static EXPORT_SYMBOL* by script instead of modpost
  parisc: remove arch/parisc/nm
  kbuild: do not create *.prelink.o for Clang LTO or IBT
  kbuild: replace $(linked-object) with CONFIG options
  kbuild: do not try to parse *.cmd files for objects provided by compiler
  kbuild: replace $(if A,A,B) with $(or A,B) in scripts/Makefile.modpost
  modpost: squash if...else-if in find_elf_symbol2()
  modpost: reuse ARRAY_SIZE() macro for section_mismatch()
  ...

Merge tag 'pull-18-rc1-work.namei' of git://git./linux/kernel/git/viro/vfs

Pull vfs pathname updates from Al Viro:
 "Several cleanups in fs/namei.c"

* tag 'pull-18-rc1-work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  namei: cleanup double word in comment
  get rid of dead code in legitimize_root()
  fs/namei.c:reserve_stack(): tidy up the call of try_to_unlazy()