review.tizen.org Git - platform/kernel/linux-exynos.git/log

rcu: Make need_resched() respond to urgent RCU-QS needs

commit 92aa39e9dc77481b90cbef25e547d66cab901496 upstream.

The per-CPU rcu_dynticks.rcu_urgent_qs variable communicates an urgent
need for an RCU quiescent state from the force-quiescent-state processing
within the grace-period kthread to context switches and to cond_resched().
Unfortunately, such urgent needs are not communicated to need_resched(),
which is sometimes used to decide when to invoke cond_resched(), for
but one example, within the KVM vcpu_run() function.  As of v4.15, this
can result in synchronize_sched() being delayed by up to ten seconds,
which can be problematic, to say nothing of annoying.

This commit therefore checks rcu_dynticks.rcu_urgent_qs from within
rcu_check_callbacks(), which is invoked from the scheduling-clock
interrupt handler.  If the current task is not an idle task and is
not executing in usermode, a context switch is forced, and either way,
the rcu_dynticks.rcu_urgent_qs variable is set to false.  If the current
task is an idle task, then RCU's dyntick-idle code will detect the
quiescent state, so no further action is required.  Similarly, if the
task is executing in usermode, other code in rcu_check_callbacks() and
its called functions will report the corresponding quiescent state.

Reported-by: Marius Hillenbrand <mhillenb@amazon.de>
Reported-by: David Woodhouse <dwmw2@infradead.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Backported to make patch apply cleanly on older versions. ]
Tested-by: Marius Hillenbrand <mhillenb@amazon.de>
Cc: <stable@vger.kernel.org> # 4.12.x - 4.19.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/mm: Check for valid vma before zapping in gmap_discard

commit 1843abd03250115af6cec0892683e70cf2297c25 upstream.

Userspace could have munmapped the area before doing unmapping from
the gmap. This would leave us with a valid vmaddr, but an invalid vma
from which we would try to zap memory.

Let's check before using the vma.

Fixes: 1e133ab296f3 ("s390/mm: split arch/s390/mm/pgtable.c")
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Message-Id: <20180816082432.78828-1-frankja@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lan78xx: Read MAC address from DT if present

commit 760db29bdc97b73ff60b091315ad787b1deb5cf5 upstream.

There is a standard mechanism for locating and using a MAC address from
the Device Tree. Use this facility in the lan78xx driver to support
applications without programmed EEPROM or OTP. At the same time,
regularise the handling of the different address sources.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tested-by: Paolo Pisati <p.pisati@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

namei: allow restricted O_CREAT of FIFOs and regular files

commit 30aba6656f61ed44cba445a3c0d38b296fa9e8f5 upstream.

Disallows open of FIFOs or regular files not owned by the user in world
writable sticky directories, unless the owner is the same as that of the
directory or the file is opened without the O_CREAT flag.  The purpose
is to make data spoofing attacks harder.  This protection can be turned
on and off separately for FIFOs and regular files via sysctl, just like
the symlinks/hardlinks protection.  This patch is based on Openwall's
"HARDEN_FIFO" feature by Solar Designer.

This is a brief list of old vulnerabilities that could have been prevented
by this feature, some of them even allow for privilege escalation:

CVE-2000-1134
CVE-2007-3852
CVE-2008-0525
CVE-2009-0416
CVE-2011-4834
CVE-2015-1838
CVE-2015-7442
CVE-2016-7489

This list is not meant to be complete.  It's difficult to track down all
vulnerabilities of this kind because they were often reported without any
mention of this particular attack vector.  In fact, before
hardlinks/symlinks restrictions, fifos/regular files weren't the favorite
vehicle to exploit them.

[s.mesoraca16@gmail.com: fix bug reported by Dan Carpenter]
Link: https://lkml.kernel.org/r/20180426081456.GA7060@mwanda
Link: http://lkml.kernel.org/r/1524829819-11275-1-git-send-email-s.mesoraca16@gmail.com
[keescook@chromium.org: drop pr_warn_ratelimited() in favor of audit changes in the future]
[keescook@chromium.org: adjust commit subjet]
Link: http://lkml.kernel.org/r/20180416175918.GA13494@beast
Signed-off-by: Salvatore Mesoraca <s.mesoraca16@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Suggested-by: Solar Designer <solar@openwall.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Loic <hackurx@opensec.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: fix uninitialized completion when USB3 port got wrong status

commit 958c0bd86075d4ef1c936998deefe1947e539240 upstream.

Realtek USB3.0 Card Reader [0bda:0328] reports wrong port status on
Cannon lake PCH USB3.1 xHCI [8086:a36d] after resume from S3,
after clear port reset it works fine.

Since this device is registered on USB3 roothub at boot,
when port status reports not superspeed, xhci_get_port_status will call
an uninitialized completion in bus_state[0].
Kernel will hang because of NULL pointer.

Restrict the USB2 resume status check in USB2 roothub to fix hang issue.

Cc: stable@vger.kernel.org
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: wipe buffer if not echoing data

commit b97b3d9fb57860a60592859e332de7759fd54c2e upstream.

If we are not echoing the data to userspace or the console is in icanon
mode, then perhaps it is a "secret" so we should wipe it once we are
done with it.

This mirrors the logic that the audit code has.

Reported-by: aszlig <aszlig@nix.build>
Tested-by: Milan Broz <gmazyland@gmail.com>
Tested-by: Daniel Zatovic <daniel.zatovic@gmail.com>
Tested-by: aszlig <aszlig@nix.build>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: wipe buffer.

commit c9a8e5fce009e3c601a43c49ea9dbcb25d1ffac5 upstream.

After we are done with the tty buffer, zero it out.

Reported-by: aszlig <aszlig@nix.build>
Tested-by: Milan Broz <gmazyland@gmail.com>
Tested-by: Daniel Zatovic <daniel.zatovic@gmail.com>
Tested-by: aszlig <aszlig@nix.build>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

include/linux/pfn_t.h: force '~' to be parsed as an unary operator

commit 4d54954a197175c0dcb3c82af0c0740d0c5f827a upstream.

Tracing the event "fs_dax:dax_pmd_insert_mapping" with perf produces this
warning:

      [fs_dax:dax_pmd_insert_mapping] unknown op '~'

It is printed in process_op (tools/lib/traceevent/event-parse.c) because
'~' is parsed as a binary operator.

perf reads the format of fs_dax:dax_pmd_insert_mapping ("print fmt") from
/sys/kernel/debug/tracing/events/fs_dax/dax_pmd_insert_mapping/format .

The format contains:

~(((u64) ~(~(((1UL) << 12)-1)))
         ^
         \ interpreted as a binary operator by process_op().

This part is generated in the declaration of the event class
dax_pmd_insert_mapping_class in include/trace/events/fs_dax.h :

__print_flags_u64(__entry->pfn_val & PFN_FLAGS_MASK, "|",
PFN_FLAGS_TRACE),

This patch adds a pair of parentheses in the declaration of PFN_FLAGS_MASK
to make sure that '~' is parsed as a unary operator by perf.

The part of the format that was problematic is now:

~(((u64) (~(~(((1UL) << 12)-1))))

Now, all the '~' are parsed as unary operators.

Link: http://lkml.kernel.org/r/20181021145939.8760-1-sebhtml@videotron.qc.ca
Signed-off-by: Sebastien Boisvert <sebhtml@videotron.qc.ca>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "Tzvetomir Stoyanov (VMware)" <tz.stoyanov@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Elenie Godzaridis <arangradient@gmail.com>
Cc: <stable@vger.kerenl.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver core: Move device_links_purge() after bus_remove_device()

commit 2ec16150179888b81717d1d3ce84e634f4736af2 upstream.

The current ordering of code in device_del() triggers a WARN_ON()
in device_links_purge(), because of an unexpected link status.

The device_links_unbind_consumers() call in device_release_driver()
has to take place before device_links_purge() for the status of all
links to be correct, so move the device_links_purge() call in
device_del() after the invocation of bus_remove_device() which calls
device_release_driver().

Fixes: 9ed9895370ae (driver core: Functional dependencies tracking support)
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: exynos: Fix invalid node referenced by i2c20 alias in Peach Pit and Pi

commit 70c3250ac1374688d7963e562fe58b23f70bcba9 upstream.

After moving all nodes under "soc" node in commit 5d99cc59a3c6 ("ARM:
dts: exynos: Move Exynos5250 and Exynos5420 nodes under soc"), the i2c20
alias in Peach Pit and Peach Pi stopped pointing to proper node:

    arch/arm/boot/dts/exynos5420-peach-pit.dtb: Warning (alias_paths):
        /aliases:i2c20: aliases property is not a valid node (/spi@12d40000/cros-ec@0/i2c-tunnel)
    arch/arm/boot/dts/exynos5800-peach-pi.dtb: Warning (alias_paths):
        /aliases:i2c20: aliases property is not a valid node (/spi@12d40000/cros-ec@0/i2c-tunnel)

Fixes: 5d99cc59a3c6 ("ARM: dts: exynos: Move Exynos5250 and Exynos5420 nodes under soc")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: samsung: exynos5250: Add missing clocks for FIMC LITE SYSMMU devices

commit 5b23fceec1ff94305c5d1accde018cae27448005 upstream.

FIMC LITE SYSMMU devices are defined in exynos5250.dtsi, but clocks for
them are not instantiated by Exynos5250 clock provider driver. Add needed
definitions for those clocks to fix IOMMU probe failure:

ERROR: could not get clock /soc/sysmmu@13c40000:sysmmu(0)
exynos-sysmmu 13c40000.sysmmu: Failed to get device clock(s)!
exynos-sysmmu: probe of 13c40000.sysmmu failed with error -38
ERROR: could not get clock /soc/sysmmu@13c50000:sysmmu(0)
exynos-sysmmu 13c50000.sysmmu: Failed to get device clock(s)!
exynos-sysmmu: probe of 13c50000.sysmmu failed with error -38

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: bfed1074f213 ("clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks")
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: omap: fix error path when pinctrl_register fails

commit 26e480f7bb7840fc0daa9c3af7c4501b2cf5902f upstream.

If pinctrl_register() fails probe will return with an error without locking
the RTC and disabling pm_runtime.
Set ret and jump to err instead.

Fixes: 97ea1906b3c2 ("rtc: omap: Support ext_wakeup configuration")
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40iw: Fix memory leak in error path of create QP

commit 5a7189d529cd146cd5838af97b32fcac4122b471 upstream.

If i40iw_allocate_dma_mem fails when creating a QP, the
memory allocated for the QP structure using kzalloc is not
freed because iwqp->allocated_buffer is used to free the
memory and it is not setup until later. Fix this by setting
iwqp->allocated_buffer before allocating the dma memory.

Fixes: d37498417947 ("i40iw: add files for iwarp interface")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx4_core: Fix wrong calculation of free counters

commit 0bb9fc4f5429ac970181c073aa32e521e20f7b73 upstream.

The field res_free indicates the total number of counters which are
available for allocation (reserved and unreserved). Fixed a bug where
the reserved counters were subtracted from res_free before any
allocation was performed.

Before this fix, free counters which were not reserved could not be
allocated.

Fixes: 9de92c60beaa ("net/mlx4_core: Adjust counter grant policy in the resource tracker")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: endpoint: Populate func_no before calling pci_epc_add_epf()

commit 0c47cd7a9b6c9c36c08113e594e9ad017fb17865 upstream.

func_no is a member of struct pci_epf.

Since struct pci_epf is used as an argument to pci_epc_add_epf() (to
bind an endpoint function to a controller), struct pci_epf.func_no
should be populated before calling pci_epc_add_epf().

Initialize the struct pci_epf.func_no member before calling
pci_epc_add_epf(), to fix the endpoint function binding to
an endpoint controller.

Fixes: d74679911610 ("PCI: endpoint: Introduce configfs entry for configuring EP functions")
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
[lorenzo.pieralisi@arm.com: rewrote the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Suggested-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild: allow to use GCC toolchain not in Clang search path

commit ef8c4ed9db80261f397f0c0bf723684601ae3b52 upstream.

When using a GCC cross toolchain which is not in a compiled in
Clang search path, Clang reverts to the system assembler and
linker. This leads to assembler or linker errors, depending on
which tool is first used for a given architecture.

It seems that Clang is not searching $PATH for a matching
assembler or linker.

Make sure that Clang picks up the correct assembler or linker by
passing the cross compilers bin directory as search path.

This allows to use Clang provided by distributions with GCC
toolchains not in /usr/bin.

Link: https://github.com/ClangBuiltLinux/linux/issues/78
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-and-tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[nc: Adjust context]
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: fix wrong WGDS_WIFI_DATA_SIZE

commit 66e839030fd698586734e017fd55c4f2a89dba0b upstream.

From coreboot/BIOS:
Name ("WGDS", Package() {
Revision,
Package() {
     DomainType,                         // 0x7:WiFi ==> We miss this one.
     WgdsWiFiSarDeltaGroup1PowerMax1,    // Group 1 FCC 2400 Max
     WgdsWiFiSarDeltaGroup1PowerChainA1, // Group 1 FCC 2400 A Offset
     WgdsWiFiSarDeltaGroup1PowerChainB1, // Group 1 FCC 2400 B Offset
     WgdsWiFiSarDeltaGroup1PowerMax2,    // Group 1 FCC 5200 Max
     WgdsWiFiSarDeltaGroup1PowerChainA2, // Group 1 FCC 5200 A Offset
     WgdsWiFiSarDeltaGroup1PowerChainB2, // Group 1 FCC 5200 B Offset
     WgdsWiFiSarDeltaGroup2PowerMax1,    // Group 2 EC Jap 2400 Max
     WgdsWiFiSarDeltaGroup2PowerChainA1, // Group 2 EC Jap 2400 A Offset
     WgdsWiFiSarDeltaGroup2PowerChainB1, // Group 2 EC Jap 2400 B Offset
     WgdsWiFiSarDeltaGroup2PowerMax2,    // Group 2 EC Jap 5200 Max
     WgdsWiFiSarDeltaGroup2PowerChainA2, // Group 2 EC Jap 5200 A Offset
     WgdsWiFiSarDeltaGroup2PowerChainB2, // Group 2 EC Jap 5200 B Offset
     WgdsWiFiSarDeltaGroup3PowerMax1,    // Group 3 ROW 2400 Max
     WgdsWiFiSarDeltaGroup3PowerChainA1, // Group 3 ROW 2400 A Offset
     WgdsWiFiSarDeltaGroup3PowerChainB1, // Group 3 ROW 2400 B Offset
     WgdsWiFiSarDeltaGroup3PowerMax2,    // Group 3 ROW 5200 Max
     WgdsWiFiSarDeltaGroup3PowerChainA2, // Group 3 ROW 5200 A Offset
     WgdsWiFiSarDeltaGroup3PowerChainB2, // Group 3 ROW 5200 B Offset
}
})

When read the ACPI data to find out the WGDS, the DATA_SIZE is never
matched.
From the above format, it gives 19 numbers, but our driver is hardcode
as 18.
Fix it to pass then can parse the data into our wgds table.
Then we will see:
iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init Sending GEO_TX_POWER_LIMIT
iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[0]
Band[0]: chain A = 68 chain B = 69 max_tx_power = 54
iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[0]
Band[1]: chain A = 48 chain B = 49 max_tx_power = 70
iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[1]
Band[0]: chain A = 51 chain B = 67 max_tx_power = 50
iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[1]
Band[1]: chain A = 69 chain B = 70 max_tx_power = 68
iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[2]
Band[0]: chain A = 49 chain B = 50 max_tx_power = 48
iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[2]
Band[1]: chain A = 52 chain B = 53 max_tx_power = 51

Cc: stable@vger.kernel.org # 4.12+
Fixes: a6bff3cb19b7 ("iwlwifi: mvm: add GEO_TX_POWER_LIMIT cmd for geographic tx power table")
Signed-off-by: Matt Chen <matt.chen@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: xpad - add support for Xbox1 PDP Camo series gamepad

[ Upstream commit 9735082a7cbae572c2eabdc45acecc8c9fa0759b ]

The "Xbox One PDP Wired Controller - Camo series" has a different
product-id than the regular PDP controller and the PDP stealth series,
but it uses the same initialization sequence. This patch adds the
product-id of the camo series to the structures that handle the other
PDP Xbox One controllers.

Signed-off-by: Ramses Ramírez <ramzeto@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: xpad - avoid using __set_bit() for capabilities

[ Upstream commit a01308031c2647ed5f1c845104b73a8820a958a9 ]

input_set_capability() and input_set_abs_param() will do it for you.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: xpad - fix some coding style issues

[ Upstream commit 68c78d0155e37992268664e134996d2b140ddf38 ]

Fix some coding style issues reported by checkpatch.pl. Mostly brackets
in macros, spacing and comment style.

Signed-off-by: Leo Sperling <leosperling97@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: xpad - add PDP device id 0x02a4

[ Upstream commit c6c848572f4da0e34ffe0a35364b4db871e13e42 ]

Adds support for a PDP Xbox One controller with device ID
(0x06ef:0x02a4). The Product string for this device is "PDP Wired
Controller for Xbox One - Stealth Series | Phantom Black".

Signed-off-by: Francis Therien <frtherien@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ubi: fastmap: Check each mapping only once

commit 34653fd8c46e771585fce5975e4243f8fd401914 upstream.

Maintain a bitmap to keep track of which LEB->PEB mapping
was checked already.
That way we have to read back VID headers only once.

Fixes: a23cf10d9abb ("ubi: fastmap: Correctly handle interrupted erasures in EBA")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>

mtd: rawnand: atmel: fix OF child-node lookup

commit 5d1e9c2212ea6b4dd735e4fc3dd6279a365d5d10 upstream.

Use the new of_get_compatible_child() helper to lookup the nfc child
node instead of using of_find_compatible_node(), which searches the
entire tree from a given start node and thus can return an unrelated
(i.e. non-child) node.

This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the node of the device being probed).

While at it, also fix a related nfc-node reference leak.

Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver")
Cc: stable <stable@vger.kernel.org> # 4.11
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Josh Wu <rainyfeeling@outlook.com>
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Add quirk to workaround the errata seen on Cavium Thunder-X2 Soc

commit 11644a7659529730eaf2f166efaabe7c3dc7af8c upstream.

Implement workaround for ThunderX2 Errata-129 (documented in
CN99XX Known Issues" available at Cavium support site).
As per ThunderX2errata-129, USB 2 device may come up as USB 1
if a connection to a USB 1 device is followed by another connection to
a USB 2 device, the link will come up as USB 1 for the USB 2 device.

Resolution: Reset the PHY after the USB 1 device is disconnected.
The PHY reset sequence is done using private registers in XHCI register
space. After the PHY is reset we check for the PLL lock status and retry
the operation if it fails. From our tests, retrying 4 times is sufficient.

Add a new quirk flag XHCI_RESET_PLL_ON_DISCONNECT to invoke the workaround
in handle_xhci_port_status().

Cc: stable@vger.kernel.org
Signed-off-by: George Cherian <george.cherian@cavium.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Allow more than 32 quirks

commit 36b6857932f380fcb55c31ac75857e3e81dd583a upstream.

We now have 32 different quirks, and the field that holds them
is full. Let's bump it up to the next stage so that we can handle
some more... The type is now an unsigned long long, which is 64bit
on most architectures.

We take this opportunity to change the quirks from using (1 << x)
to BIT_ULL(x).

Tested-by: Domenico Andreoli <domenico.andreoli@linux.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Faiz Abbas <faiz_abbas@ti.com>
Tested-by: Domenico Andreoli <domenico.andreoli@linux.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: "Cherian, George" <George.Cherian@cavium.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: remove no-op -p linker flag

(commit 1a381d4a0a9a0f999a13faaba22bf6b3fc80dcb9 upstream)

Linking the ARM64 defconfig kernel with LLVM lld fails with the error:

  ld.lld: error: unknown argument: -p
  Makefile:1015: recipe for target 'vmlinux' failed

Without this flag, the ARM64 defconfig kernel successfully links with
lld and boots on Dragonboard 410c.

After digging through binutils source and changelogs, it turns out that
-p is only relevant to ancient binutils installations targeting 32-bit
ARM.  binutils accepts -p for AArch64 too, but it's always been
undocumented and silently ignored.  A comment in
ld/emultempl/aarch64elf.em explains that it's "Only here for backwards
compatibility".

Since this flag is a no-op on ARM64, we can safely drop it.

Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: twl4030-charger: fix OF sibling-node lookup

[ Upstream commit 9844fb2e351311210e6660a9a1c62d17424a6145 ]

Use the new of_get_compatible_child() helper to lookup the usb sibling
node instead of using of_find_compatible_node(), which searches the
entire tree from a given start node and thus can return an unrelated
(non-sibling) node.

This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the parent device node).

While at it, also fix the related phy-node reference leak.

Fixes: f5e4edb8c888 ("power: twl4030_charger: find associated phy by more reliable means.")
Cc: stable <stable@vger.kernel.org> # 4.2
Cc: NeilBrown <neilb@suse.de>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: fix OF sibling-node lookup

[ Upstream commit ceff2f4dcd44abf35864d9a99f85ac619e89a01d ]

Use the new of_get_compatible_child() helper to lookup the sibling
instead of using of_find_compatible_node(), which searches the entire
tree from a given start node and thus can return an unrelated (i.e.
non-sibling) node.

This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the parent device node).

While at it, also fix the related cec-node reference leak.

Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support")
Cc: stable <stable@vger.kernel.org> # 4.8
Cc: Junzhi Zhao <junzhi.zhao@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bcmgenet: fix OF child-node lookup

[ Upstream commit d397dbe606120a1ea1b11b0020c3f7a3852da5ac ]

Use the new of_get_compatible_child() helper to lookup the mdio child
node instead of using of_find_compatible_node(), which searches the
entire tree from a given start node and thus can return an unrelated
(i.e. non-child) node.

This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the node of the device being probed).

Fixes: aa09677cba42 ("net: bcmgenet: add MDIO routines")
Cc: stable <stable@vger.kernel.org> # 3.15
Cc: David S. Miller <davem@davemloft.net>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFC: nfcmrvl_uart: fix OF child-node lookup

[ Upstream commit 5bf59773aaf36dd62117dc83d50e1bbf9ef432da ]

Use the new of_get_compatible_child() helper to lookup the nfc child
node instead of using of_find_compatible_node(), which searches the
entire tree from a given start node and thus can return an unrelated
(i.e. non-child) node.

This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the parent node).

Fixes: e097dc624f78 ("NFC: nfcmrvl: add UART driver")
Fixes: d8e018c0b321 ("NFC: nfcmrvl: update device tree bindings for Marvell NFC")
Cc: stable <stable@vger.kernel.org> # 4.2
Cc: Vincent Cuissard <cuissard@marvell.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: add helper to lookup compatible child node

[ Upstream commit 36156f9241cb0f9e37d998052873ca7501ad4b36 ]

Add of_get_compatible_child() helper that can be used to lookup
compatible child nodes.

Several drivers currently use of_find_compatible_node() to lookup child
nodes while failing to notice that the of_find_ functions search the
entire tree depth-first (from a given start node) and therefore can
match unrelated nodes. The fact that these functions also drop a
reference to the node they start searching from (e.g. the parent node)
is typically also overlooked, something which can lead to use-after-free
bugs.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm, page_alloc: check for max order in hot path

[ Upstream commit c63ae43ba53bc432b414fd73dd5f4b01fcb1ab43 ]

Konstantin has noticed that kvmalloc might trigger the following
warning:

  WARNING: CPU: 0 PID: 6676 at mm/vmstat.c:986 __fragmentation_index+0x54/0x60
  [...]
  Call Trace:
   fragmentation_index+0x76/0x90
   compaction_suitable+0x4f/0xf0
   shrink_node+0x295/0x310
   node_reclaim+0x205/0x250
   get_page_from_freelist+0x649/0xad0
   __alloc_pages_nodemask+0x12a/0x2a0
   kmalloc_large_node+0x47/0x90
   __kmalloc_node+0x22b/0x2e0
   kvmalloc_node+0x3e/0x70
   xt_alloc_table_info+0x3a/0x80 [x_tables]
   do_ip6t_set_ctl+0xcd/0x1c0 [ip6_tables]
   nf_setsockopt+0x44/0x60
   SyS_setsockopt+0x6f/0xc0
   do_syscall_64+0x67/0x120
   entry_SYSCALL_64_after_hwframe+0x3d/0xa2

the problem is that we only check for an out of bound order in the slow
path and the node reclaim might happen from the fast path already.  This
is fixable by making sure that kvmalloc doesn't ever use kmalloc for
requests that are larger than KMALLOC_MAX_SIZE but this also shows that
the code is rather fragile.  A recent UBSAN report just underlines that
by the following report

  UBSAN: Undefined behaviour in mm/page_alloc.c:3117:19
  shift exponent 51 is too large for 32-bit type 'int'
  CPU: 0 PID: 6520 Comm: syz-executor1 Not tainted 4.19.0-rc2 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  Call Trace:
   __dump_stack lib/dump_stack.c:77 [inline]
   dump_stack+0xd2/0x148 lib/dump_stack.c:113
   ubsan_epilogue+0x12/0x94 lib/ubsan.c:159
   __ubsan_handle_shift_out_of_bounds+0x2b6/0x30b lib/ubsan.c:425
   __zone_watermark_ok+0x2c7/0x400 mm/page_alloc.c:3117
   zone_watermark_fast mm/page_alloc.c:3216 [inline]
   get_page_from_freelist+0xc49/0x44c0 mm/page_alloc.c:3300
   __alloc_pages_nodemask+0x21e/0x640 mm/page_alloc.c:4370
   alloc_pages_current+0xcc/0x210 mm/mempolicy.c:2093
   alloc_pages include/linux/gfp.h:509 [inline]
   __get_free_pages+0x12/0x60 mm/page_alloc.c:4414
   dma_mem_alloc+0x36/0x50 arch/x86/include/asm/floppy.h:156
   raw_cmd_copyin drivers/block/floppy.c:3159 [inline]
   raw_cmd_ioctl drivers/block/floppy.c:3206 [inline]
   fd_locked_ioctl+0xa00/0x2c10 drivers/block/floppy.c:3544
   fd_ioctl+0x40/0x60 drivers/block/floppy.c:3571
   __blkdev_driver_ioctl block/ioctl.c:303 [inline]
   blkdev_ioctl+0xb3c/0x1a30 block/ioctl.c:601
   block_ioctl+0x105/0x150 fs/block_dev.c:1883
   vfs_ioctl fs/ioctl.c:46 [inline]
   do_vfs_ioctl+0x1c0/0x1150 fs/ioctl.c:687
   ksys_ioctl+0x9e/0xb0 fs/ioctl.c:702
   __do_sys_ioctl fs/ioctl.c:709 [inline]
   __se_sys_ioctl fs/ioctl.c:707 [inline]
   __x64_sys_ioctl+0x7e/0xc0 fs/ioctl.c:707
   do_syscall_64+0xc4/0x510 arch/x86/entry/common.c:290
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

Note that this is not a kvmalloc path.  It is just that the fast path
really depends on having sanitzed order as well.  Therefore move the
order check to the fast path.

Link: http://lkml.kernel.org/r/20181113094305.GM15120@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reported-by: Kyungtae Kim <kt0755@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Byoungyoung Lee <lifeasageek@gmail.com>
Cc: "Dae R. Jeong" <threeearcat@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tmpfs: make lseek(SEEK_DATA/SEK_HOLE) return ENXIO with a negative offset

[ Upstream commit 1a413646931cb14442065cfc17561e50f5b5bb44 ]

Other filesystems such as ext4, f2fs and ubifs all return ENXIO when
lseek (SEEK_DATA or SEEK_HOLE) requests a negative offset.

man 2 lseek says

:      EINVAL whence  is  not  valid.   Or: the resulting file offset would be
:             negative, or beyond the end of a seekable device.
:
:      ENXIO  whence is SEEK_DATA or SEEK_HOLE, and the file offset is  beyond
:             the end of the file.

Make tmpfs return ENXIO under these circumstances as well.  After this,
tmpfs also passes xfstests's generic/448.

[akpm@linux-foundation.org: rewrite changelog]
Link: http://lkml.kernel.org/r/1540434176-14349-1-git-send-email-yuyufen@huawei.com
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

z3fold: fix possible reclaim races

[ Upstream commit ca0246bb97c23da9d267c2107c07fb77e38205c9 ]

Reclaim and free can race on an object which is basically fine but in
order for reclaim to be able to map "freed" object we need to encode
object length in the handle. handle_to_chunks() is then introduced to
extract object length from a handle and use it during mapping.

Moreover, to avoid racing on a z3fold "headless" page release, we should
not try to free that page in z3fold_free() if the reclaim bit is set.
Also, in the unlikely case of trying to reclaim a page being freed, we
should not proceed with that page.

While at it, fix the page accounting in reclaim function.

This patch supersedes "[PATCH] z3fold: fix reclaim lock-ups".

Link: http://lkml.kernel.org/r/20181105162225.74e8837d03583a9b707cf559@gmail.com
Signed-off-by: Vitaly Wool <vitaly.vul@sony.com>
Signed-off-by: Jongseok Kim <ks77sj@gmail.com>
Reported-by-by: Jongseok Kim <ks77sj@gmail.com>
Reviewed-by: Snild Dolkow <snild@sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi/arm: Revert deferred unmap of early memmap mapping

[ Upstream commit 33412b8673135b18ea42beb7f5117ed0091798b6 ]

Commit:

3ea86495aef2 ("efi/arm: preserve early mapping of UEFI memory map longer for BGRT")

deferred the unmap of the early mapping of the UEFI memory map to
accommodate the ACPI BGRT code, which looks up the memory type that
backs the BGRT table to validate it against the requirements of the UEFI spec.

Unfortunately, this causes problems on ARM, which does not permit
early mappings to persist after paging_init() is called, resulting
in a WARN() splat. Since we don't support the BGRT table on ARM anway,
let's revert ARM to the old behaviour, which is to take down the
early mapping at the end of efi_init().

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 3ea86495aef2 ("efi/arm: preserve early mapping of UEFI memory ...")
Link: http://lkml.kernel.org/r/20181114175544.12860-3-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/numa: Suppress "VPHN is not supported" messages

[ Upstream commit 437ccdc8ce629470babdda1a7086e2f477048cbd ]

When VPHN function is not supported and during cpu hotplug event,
kernel prints message 'VPHN function not supported. Disabling
polling...'. Currently it prints on every hotplug event, it floods
dmesg when a KVM guest tries to hotplug huge number of vcpus, let's
just print once and suppress further kernel prints.

Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kdb: Use strscpy with destination buffer size

[ Upstream commit c2b94c72d93d0929f48157eef128c4f9d2e603ce ]

gcc 8.1.0 warns with:

kernel/debug/kdb/kdb_support.c: In function ‘kallsyms_symbol_next’:
kernel/debug/kdb/kdb_support.c:239:4: warning: ‘strncpy’ specified bound depends on the length of the source argument [-Wstringop-overflow=]
strncpy(prefix_name, name, strlen(name)+1);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/debug/kdb/kdb_support.c:239:31: note: length computed here

Use strscpy() with the destination buffer size, and use ellipses when
displaying truncated symbols.

v2: Use strscpy()

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Jonathan Toppins <jtoppins@redhat.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: kgdb-bugreport@lists.sourceforge.net
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Fix a bogus get/put in generic_key_to_expire()

[ Upstream commit e3d5e573a54dabdc0f9f3cb039d799323372b251 ]

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/intel/uncore: Add more IMC PCI IDs for KabyLake and CoffeeLake CPUs

[ Upstream commit c10a8de0d32e95b0b8c7c17b6dc09baea5a5a899 ]

KabyLake and CoffeeLake CPUs have the same client uncore events as SkyLake.

Add the PCI IDs for the KabyLake Y, U, S processor lines and CoffeeLake U,
H, S processor lines.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20181019170419.378-1-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/io: Fix the IO workarounds code to work with Radix

[ Upstream commit 43c6494fa1499912c8177e71450c0279041152a6 ]

Back in 2006 Ben added some workarounds for a misbehaviour in the
Spider IO bridge used on early Cell machines, see commit
014da7ff47b5 ("[POWERPC] Cell "Spider" MMIO workarounds"). Later these
were made to be generic, ie. not tied specifically to Spider.

The code stashes a token in the high bits (59-48) of virtual addresses
used for IO (eg. returned from ioremap()). This works fine when using
the Hash MMU, but when we're using the Radix MMU the bits used for the
token overlap with some of the bits of the virtual address.

This is because the maximum virtual address is larger with Radix, up
to c00fffffffffffff, and in fact we use that high part of the address
range for ioremap(), see RADIX_KERN_IO_START.

As it happens the bits that are used overlap with the bits that
differentiate an IO address vs a linear map address. If the resulting
address lies outside the linear mapping we will crash (see below), if
not we just corrupt memory.

  virtio-pci 0000:00:00.0: Using 64-bit direct DMA at offset 800000000000000
  Unable to handle kernel paging request for data at address 0xc000000080000014
  ...
  CFAR: c000000000626b98 DAR: c000000080000014 DSISR: 42000000 IRQMASK: 0
  GPR00: c0000000006c54fc c00000003e523378 c0000000016de600 0000000000000000
  GPR04: c00c000080000014 0000000000000007 0fffffff000affff 0000000000000030
         ^^^^
  ...
  NIP [c000000000626c5c] .iowrite8+0xec/0x100
  LR [c0000000006c992c] .vp_reset+0x2c/0x90
  Call Trace:
    .pci_bus_read_config_dword+0xc4/0x120 (unreliable)
    .register_virtio_device+0x13c/0x1c0
    .virtio_pci_probe+0x148/0x1f0
    .local_pci_probe+0x68/0x140
    .pci_device_probe+0x164/0x220
    .really_probe+0x274/0x3b0
    .driver_probe_device+0x80/0x170
    .__driver_attach+0x14c/0x150
    .bus_for_each_dev+0xb8/0x130
    .driver_attach+0x34/0x50
    .bus_add_driver+0x178/0x2f0
    .driver_register+0x90/0x1a0
    .__pci_register_driver+0x6c/0x90
    .virtio_pci_driver_init+0x2c/0x40
    .do_one_initcall+0x64/0x280
    .kernel_init_freeable+0x36c/0x474
    .kernel_init+0x24/0x160
    .ret_from_kernel_thread+0x58/0x7c

This hasn't been a problem because CONFIG_PPC_IO_WORKAROUNDS which
enables this code is usually not enabled. It is only enabled when it's
selected by PPC_CELL_NATIVE which is only selected by
PPC_IBM_CELL_BLADE and that in turn depends on BIG_ENDIAN. So in order
to hit the bug you need to build a big endian kernel, with IBM Cell
Blade support enabled, as well as Radix MMU support, and then boot
that on Power9 using Radix MMU.

Still we can fix the bug, so let's do that. We simply use fewer bits
for the token, taking the union of the restrictions on the address
from both Hash and Radix, we end up with 8 bits we can use for the
token. The only user of the token is iowa_mem_find_bus() which only
supports 8 token values, so 8 bits is plenty for that.

Fixes: 566ca99af026 ("powerpc/mm/radix: Add dummy radix_enabled()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

floppy: fix race condition in __floppy_read_block_0()

[ Upstream commit de7b75d82f70c5469675b99ad632983c50b6f7e7 ]

LKP recently reported a hang at bootup in the floppy code:

[  245.678853] INFO: task mount:580 blocked for more than 120 seconds.
[  245.679906]       Tainted: G                T 4.19.0-rc6-00172-ga9f38e1 #1
[  245.680959] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  245.682181] mount           D 6372   580      1 0x00000004
[  245.683023] Call Trace:
[  245.683425]  __schedule+0x2df/0x570
[  245.683975]  schedule+0x2d/0x80
[  245.684476]  schedule_timeout+0x19d/0x330
[  245.685090]  ? wait_for_common+0xa5/0x170
[  245.685735]  wait_for_common+0xac/0x170
[  245.686339]  ? do_sched_yield+0x90/0x90
[  245.686935]  wait_for_completion+0x12/0x20
[  245.687571]  __floppy_read_block_0+0xfb/0x150
[  245.688244]  ? floppy_resume+0x40/0x40
[  245.688844]  floppy_revalidate+0x20f/0x240
[  245.689486]  check_disk_change+0x43/0x60
[  245.690087]  floppy_open+0x1ea/0x360
[  245.690653]  __blkdev_get+0xb4/0x4d0
[  245.691212]  ? blkdev_get+0x1db/0x370
[  245.691777]  blkdev_get+0x1f3/0x370
[  245.692351]  ? path_put+0x15/0x20
[  245.692871]  ? lookup_bdev+0x4b/0x90
[  245.693539]  blkdev_get_by_path+0x3d/0x80
[  245.694165]  mount_bdev+0x2a/0x190
[  245.694695]  squashfs_mount+0x10/0x20
[  245.695271]  ? squashfs_alloc_inode+0x30/0x30
[  245.695960]  mount_fs+0xf/0x90
[  245.696451]  vfs_kern_mount+0x43/0x130
[  245.697036]  do_mount+0x187/0xc40
[  245.697563]  ? memdup_user+0x28/0x50
[  245.698124]  ksys_mount+0x60/0xc0
[  245.698639]  sys_mount+0x19/0x20
[  245.699167]  do_int80_syscall_32+0x61/0x130
[  245.699813]  entry_INT80_32+0xc7/0xc7

showing that we never complete that read request. The reason is that
the completion setup is racy - it initializes the completion event
AFTER submitting the IO, which means that the IO could complete
before/during the init. If it does, we are passing garbage to
complete() and we may sleep forever waiting for the event to
occur.

Fixes: 7b7b68bba5ef ("floppy: bail out in open() if drive is not responding to block0 read")
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: simd - correctly take reqsize of wrapped skcipher into account

[ Upstream commit 508a1c4df085a547187eed346f1bfe5e381797f1 ]

The simd wrapper's skcipher request context structure consists
of a single subrequest whose size is taken from the subordinate
skcipher. However, in simd_skcipher_init(), the reqsize that is
retrieved is not from the subordinate skcipher but from the
cryptd request structure, whose size is completely unrelated to
the actual wrapped skcipher.

Reported-by: Qian Cai <cai@gmx.us>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Qian Cai <cai@gmx.us>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: pcf2127: fix a kmemleak caused in pcf2127_i2c_gather_write

[ Upstream commit 9bde0afb7a906f1dabdba37162551565740b862d ]

pcf2127_i2c_gather_write() allocates memory as local variable
for i2c_master_send(), after finishing the master transfer,
the allocated memory should be freed. The kmemleak is reported:

unreferenced object 0xffff80231e7dba80 (size 64):
  comm "hwclock", pid 27762, jiffies 4296880075 (age 356.944s)
  hex dump (first 32 bytes):
    03 00 12 03 19 02 11 13 00 80 98 18 00 00 ff ff ................
    00 50 00 00 00 00 00 00 02 00 00 00 00 00 00 00 .P..............
  backtrace:
    [<ffff000008221398>] create_object+0xf8/0x278
    [<ffff000008a96264>] kmemleak_alloc+0x74/0xa0
    [<ffff00000821070c>] __kmalloc+0x1ac/0x348
    [<ffff0000087ed1dc>] pcf2127_i2c_gather_write+0x54/0xf8
    [<ffff0000085fd9d4>] _regmap_raw_write+0x464/0x850
    [<ffff0000085fe3f4>] regmap_bulk_write+0x1a4/0x348
    [<ffff0000087ed32c>] pcf2127_rtc_set_time+0xac/0xe8
    [<ffff0000087eaad8>] rtc_set_time+0x80/0x138
    [<ffff0000087ebfb0>] rtc_dev_ioctl+0x398/0x610
    [<ffff00000823f2c0>] do_vfs_ioctl+0xb0/0x848
    [<ffff00000823fae4>] SyS_ioctl+0x8c/0xa8
    [<ffff000008083ac0>] el0_svc_naked+0x34/0x38
    [<ffffffffffffffff>] 0xffffffffffffffff

Signed-off-by: Xulin Sun <xulin.sun@windriver.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: imx6q: add return value check for voltage scale

[ Upstream commit 6ef28a04d1ccf718eee069b72132ce4aa1e52ab9 ]

Add return value check for voltage scale when ARM clock
rate change fail.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: PPC: Move and undef TRACE_INCLUDE_PATH/FILE

[ Upstream commit 28c5bcf74fa07c25d5bd118d1271920f51ce2a98 ]

TRACE_INCLUDE_PATH and TRACE_INCLUDE_FILE are used by
<trace/define_trace.h>, so like that #include, they should
be outside #ifdef protection.

They also need to be #undefed before defining, in case multiple trace
headers are included by the same C file.  This became the case on
book3e after commit cf4a6085151a ("powerpc/mm: Add missing tracepoint for
tlbie"), leading to the following build error:

   CC      arch/powerpc/kvm/powerpc.o
In file included from arch/powerpc/kvm/powerpc.c:51:0:
arch/powerpc/kvm/trace.h:9:0: error: "TRACE_INCLUDE_PATH" redefined
[-Werror]
  #define TRACE_INCLUDE_PATH .
  ^
In file included from arch/powerpc/kvm/../mm/mmu_decl.h:25:0,
                  from arch/powerpc/kvm/powerpc.c:48:
./arch/powerpc/include/asm/trace.h:224:0: note: this is the location of
the previous definition
  #define TRACE_INCLUDE_PATH asm
  ^
cc1: all warnings being treated as errors

Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: meson: fix pinconf bias disable

[ Upstream commit e39f9dd8206ad66992ac0e6218ef1ba746f2cce9 ]

If a bias is enabled on a pin of an Amlogic SoC, calling .pin_config_set()
with PIN_CONFIG_BIAS_DISABLE will not disable the bias. Instead it will
force a pull-down bias on the pin.

Instead of the pull type register bank, the driver should access the pull
enable register bank.

Fixes: 6ac730951104 ("pinctrl: add driver for Amlogic Meson SoCs")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/hfi1: Eliminate races in the SDMA send error path

commit a0e0cb82804a6a21d9067022c2dfdf80d11da429 upstream.

pq_update() can only be called in two places: from the completion
function when the complete (npkts) sequence of packets has been
submitted and processed, or from setup function if a subset of the
packets were submitted (i.e. the error path).

Currently both paths can call pq_update() if an error occurrs.  This
race will cause the n_req value to go negative, hanging file_close(),
or cause a crash by freeing the txlist more than once.

Several variables are used to determine SDMA send state.  Most of
these are unnecessary, and have code inspectible races between the
setup function and the completion function, in both the send path and
the error path.

The request 'status' value can be set by the setup or by the
completion function.  This is code inspectibly racy.  Since the status
is not needed in the completion code or by the caller it has been
removed.

The request 'done' value races between usage by the setup and the
completion function.  The completion function does not need this.
When the number of processed packets matches npkts, it is done.

The 'has_error' value races between usage of the setup and the
completion function.  This can cause incorrect error handling and leave
the n_req in an incorrect value (i.e. negative).

Simplify the code by removing all of the unneeded state checks and
variables.

Clean up iovs node when it is freed.

Eliminate race conditions in the error path:

If all packets are submitted, the completion handler will set the
completion status correctly (ok or aborted).

If all packets are not submitted, the caller must wait until the
submitted packets have completed, and then set the completion status.

These two change eliminate the race condition in the error path.

Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: hi311x: Use level-triggered interrupt

commit f164d0204b1156a7e0d8d1622c1a8d25752befec upstream.

If the hi3110 shares the SPI bus with another traffic-intensive device
and packets are received in high volume (by a separate machine sending
with "cangen -g 0 -i -x"), reception stops after a few minutes and the
counter in /proc/interrupts stops incrementing.  Bus state is "active".
Bringing the interface down and back up reconvenes the reception.  The
issue is not observed when the hi3110 is the sole device on the SPI bus.

Using a level-triggered interrupt makes the issue go away and lets the
hi3110 successfully receive 2 GByte over the course of 5 days while a
ks8851 Ethernet chip on the same SPI bus handles 6 GByte of traffic.

Unfortunately the hi3110 datasheet is mum on the trigger type.  The pin
description on page 3 only specifies the polarity (active high):
http://www.holtic.com/documents/371-hi-3110_v-rev-kpdf.do

Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Akshay Bhat <akshay.bhat@timesys.com>
Cc: Casey Fitzpatrick <casey.fitzpatrick@timesys.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: raw: check for CAN FD capable netdev in raw_sendmsg()

commit a43608fa77213ad5ac5f75994254b9f65d57cfa0 upstream.

When the socket is CAN FD enabled it can handle CAN FD frame
transmissions. Add an additional check in raw_sendmsg() as a CAN2.0 CAN
driver (non CAN FD) should never see a CAN FD frame. Due to the commonly
used can_dropped_invalid_skb() function the CAN 2.0 driver would drop
that CAN FD frame anyway - but with this patch the user gets a proper
-EINVAL return code.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: rx-offload: rename can_rx_offload_irq_queue_err_skb() to can_rx_offload_queue_tail()

commit 4530ec36bb1e0d24f41c33229694adacda3d5d89 upstream.

This function has nothing todo with error.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: rx-offload: introduce can_rx_offload_get_echo_skb() and can_rx_offload_queue_sorted() functions

commit 55059f2b7f868cd43b3ad30e28e18347e1b46ace upstream.

Current CAN framework can't guarantee proper/chronological order
of RX and TX-ECHO messages. To make this possible, drivers should use
this functions instead of can_get_echo_skb().

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb

commit 7da11ba5c5066dadc2e96835a6233d56d7b7764a upstream.

Prior to echoing a successfully transmitted CAN frame (by calling
can_get_echo_skb()), CAN drivers have to put the CAN frame (by calling
can_put_echo_skb() in the transmit function). These put and get function
take an index as parameter, which is used to identify the CAN frame.

A driver calling can_get_echo_skb() with a index not pointing to a skb
is a BUG, so add an appropriate error message.

Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: dev: __can_get_echo_skb(): Don't crash the kernel if can_priv::echo_skb is accessed out of bounds

commit e7a6994d043a1e31d5b17706a22ce33d2a3e4cdc upstream.

If the "struct can_priv::echo_skb" is accessed out of bounds would lead
to a kernel crash. Better print a sensible warning message instead and
try to recover.

Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: dev: __can_get_echo_skb(): replace struct can_frame by canfd_frame to access frame length

commit 200f5c49f7a2cd694436bfc6cb0662b794c96736 upstream.

This patch replaces the use of "struct can_frame::can_dlc" by "struct
canfd_frame::len" to access the frame's length. As it is ensured that
both structures have a compatible memory layout for this member this is
no functional change. Futher, this compatibility is documented in a
comment.

Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: dev: can_get_echo_skb(): factor out non sending code to __can_get_echo_skb()

commit a4310fa2f24687888ce80fdb0e88583561a23700 upstream.

This patch factors out all non sending parts of can_get_echo_skb() into
a seperate function __can_get_echo_skb(), so that it can be re-used in
an upcoming patch.

Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ast: Remove existing framebuffers before loading driver

commit 5478ad10e7850ce3d8b7056db05ddfa3c9ddad9a upstream.

If vesafb attaches to the AST device, it configures the framebuffer memory
for uncached access by default. When ast.ko later tries to attach itself to
the device, it wants to use write-combining on the framebuffer memory, but
vesefb's existing configuration for uncached access takes precedence. This
results in reduced performance.

Removing the framebuffer's configuration before loding the AST driver fixes
the problem. Other DRM drivers already contain equivalent code.

Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1112963
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: <stable@vger.kernel.org>
Tested-by: Y.C. Chen <yc_chen@aspeedtech.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ast: fixed cursor may disappear sometimes

commit 7989b9ee8bafe5cc625381dd0c3c4586de27ca26 upstream.

Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ast: change resolution may cause screen blurred

commit 1a37bd823891568f8721989aed0615835632d81a upstream.

The value of pitches is not correct while calling mode_set.
The issue we found so far on following system:
- Debian8 with XFCE Desktop
- Ubuntu with KDE Desktop
- SUSE15 with KDE Desktop

Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Cc: <stable@vger.kernel.org>
Tested-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: Prevent bus suspend if a port connect change or polling state is detected

commit 2f31a67f01a8beb22cae754c53522cb61a005750 upstream.

USB3 roothub might autosuspend before a plugged USB3 device is detected,
causing USB3 device enumeration failure.

USB3 devices don't show up as connected and enabled until USB3 link trainig
completes. On a fast booting platform with a slow USB3 link training the
link might reach the connected enabled state just as the bus is suspending.

If this device is discovered first time by the xhci_bus_suspend() routine
it will be put to U3 suspended state like the other ports which failed to
suspend earlier.

The hub thread will notice the connect change and resume the bus,
moving the port back to U0

This U0 -> U3 -> U0 transition right after being connected seems to be
too much for some devices, causing them to first go to SS.Inactive state,
and finally end up stuck in a polling state with reset asserted

Fix this by failing the bus suspend if a port has a connect change or is
in a polling state in xhci_bus_suspend().

Don't do any port changes until all ports are checked, buffer all port
changes and only write them in the end if suspend can proceed

Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/core: Perform modify QP on real one

commit b2bedfb39541a7e14798d066b6f8685d84c8fcf5 upstream.

Currently qp->port stores the port number whenever IB_QP_PORT
QP attribute mask is set (during QP state transition to INIT state).
This port number should be stored for the real QP when XRC target QP
is used.

Follow the ib_modify_qp() implementation and hide the access to ->real_qp.

Fixes: a512c2fbef9c ("IB/core: Introduce modify QP operation with udata")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: do not release socket ownership in tcp_close()

commit 8873c064d1de579ea23412a6d3eee972593f142b upstream.

syzkaller was able to hit the WARN_ON(sock_owned_by_user(sk));
in tcp_close()

While a socket is being closed, it is very possible other
threads find it in rtnetlink dump.

tcp_get_info() will acquire the socket lock for a short amount
of time (slow = lock_sock_fast(sk)/unlock_sock_fast(sk, slow);),
enough to trigger the warning.

Fixes: 67db3e4bfbc9 ("tcp: no longer hold ehash lock while calling tcp_get_info()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/memory.c: recheck page table entry with page table lock held

commit ff09d7ec9786be4ad7589aa987d7dc66e2dd9160 upstream.

We clear the pte temporarily during read/modify/write update of the pte.
If we take a page fault while the pte is cleared, the application can get
SIGBUS. One such case is with remap_pfn_range without a backing
vm_ops->fault callback. do_fault will return SIGBUS in that case.

cpu 0 cpu1
mprotect()
ptep_modify_prot_start()/pte cleared.
.
. page fault.
.
.
prep_modify_prot_commit()

Fix this by taking page table lock and rechecking for pte_none.

[aneesh.kumar@linux.ibm.com: fix crash observed with syzkaller run]
Link: http://lkml.kernel.org/r/87va6bwlfg.fsf@linux.ibm.com
Link: http://lkml.kernel.org/r/20180926031858.9692-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: don't warn about large allocations for slab

commit 61448479a9f2c954cde0cfe778cb6bec5d0a748d upstream.

Slub does not call kmalloc_slab() for sizes > KMALLOC_MAX_CACHE_SIZE,
instead it falls back to kmalloc_large().

For slab KMALLOC_MAX_CACHE_SIZE == KMALLOC_MAX_SIZE and it calls
kmalloc_slab() for all allocations relying on NULL return value for
over-sized allocations.

This inconsistency leads to unwanted warnings from kmalloc_slab() for
over-sized allocations for slab.  Returning NULL for failed allocations is
the expected behavior.

Make slub and slab code consistent by checking size >
KMALLOC_MAX_CACHE_SIZE in slab before calling kmalloc_slab().

While we are here also fix the check in kmalloc_slab().  We should check
against KMALLOC_MAX_CACHE_SIZE rather than KMALLOC_MAX_SIZE.  It all kinda
worked because for slab the constants are the same, and slub always checks
the size against KMALLOC_MAX_CACHE_SIZE before kmalloc_slab().  But if we
get there with size > KMALLOC_MAX_CACHE_SIZE anyhow bad things will
happen.  For example, in case of a newly introduced bug in slub code.

Also move the check in kmalloc_slab() from function entry to the size >
192 case.  This partially compensates for the additional check in slab
code and makes slub code a bit faster (at least theoretically).

Also drop __GFP_NOWARN in the warning check.  This warning means a bug in
slab code itself, user-passed flags have nothing to do with it.

Nothing of this affects slob.

Link: http://lkml.kernel.org/r/20180927171502.226522-1-dvyukov@gmail.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: syzbot+87829a10073277282ad1@syzkaller.appspotmail.com
Reported-by: syzbot+ef4e8fc3a06e9019bb40@syzkaller.appspotmail.com
Reported-by: syzbot+6e438f4036df52cbb863@syzkaller.appspotmail.com
Reported-by: syzbot+8574471d8734457d98aa@syzkaller.appspotmail.com
Reported-by: syzbot+af1504df0807a083dbd9@syzkaller.appspotmail.com
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

llc: do not use sk_eat_skb()

commit 604d415e2bd642b7e02c80e719e0396b9d4a77a6 upstream.

syzkaller triggered a use-after-free [1], caused by a combination of
skb_get() in llc_conn_state_process() and usage of sk_eat_skb()

sk_eat_skb() is assuming the skb about to be freed is only used by
the current thread. TCP/DCCP stacks enforce this because current
thread holds the socket lock.

llc_conn_state_process() wants to make sure skb does not disappear,
and holds a reference on the skb it manipulates. But as soon as this
skb is added to socket receive queue, another thread can consume it.

This means that llc must use regular skb_unlink() and kfree_skb()
so that both producer and consumer can safely work on the same skb.

[1]
BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:21 [inline]
BUG: KASAN: use-after-free in refcount_read include/linux/refcount.h:43 [inline]
BUG: KASAN: use-after-free in skb_unref include/linux/skbuff.h:967 [inline]
BUG: KASAN: use-after-free in kfree_skb+0xb7/0x580 net/core/skbuff.c:655
Read of size 4 at addr ffff8801d1f6fba4 by task ksoftirqd/1/18

CPU: 1 PID: 18 Comm: ksoftirqd/1 Not tainted 4.19.0-rc8+ #295
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c4/0x2b6 lib/dump_stack.c:113
print_address_description.cold.8+0x9/0x1ff mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.9+0x242/0x309 mm/kasan/report.c:412
check_memory_region_inline mm/kasan/kasan.c:260 [inline]
check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267
kasan_check_read+0x11/0x20 mm/kasan/kasan.c:272
atomic_read include/asm-generic/atomic-instrumented.h:21 [inline]
refcount_read include/linux/refcount.h:43 [inline]
skb_unref include/linux/skbuff.h:967 [inline]
kfree_skb+0xb7/0x580 net/core/skbuff.c:655
llc_sap_state_process+0x9b/0x550 net/llc/llc_sap.c:224
llc_sap_rcv+0x156/0x1f0 net/llc/llc_sap.c:297
llc_sap_handler+0x65e/0xf80 net/llc/llc_sap.c:438
llc_rcv+0x79e/0xe20 net/llc/llc_input.c:208
__netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4913
__netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5023
process_backlog+0x218/0x6f0 net/core/dev.c:5829
napi_poll net/core/dev.c:6249 [inline]
net_rx_action+0x7c5/0x1950 net/core/dev.c:6315
__do_softirq+0x30c/0xb03 kernel/softirq.c:292
run_ksoftirqd+0x94/0x100 kernel/softirq.c:653
smpboot_thread_fn+0x68b/0xa00 kernel/smpboot.c:164
kthread+0x35a/0x420 kernel/kthread.c:246
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:413

Allocated by task 18:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553
kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490
kmem_cache_alloc_node+0x144/0x730 mm/slab.c:3644
__alloc_skb+0x119/0x770 net/core/skbuff.c:193
alloc_skb include/linux/skbuff.h:995 [inline]
llc_alloc_frame+0xbc/0x370 net/llc/llc_sap.c:54
llc_station_ac_send_xid_r net/llc/llc_station.c:52 [inline]
llc_station_rcv+0x1dc/0x1420 net/llc/llc_station.c:111
llc_rcv+0xc32/0xe20 net/llc/llc_input.c:220
__netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4913
__netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5023
process_backlog+0x218/0x6f0 net/core/dev.c:5829
napi_poll net/core/dev.c:6249 [inline]
net_rx_action+0x7c5/0x1950 net/core/dev.c:6315
__do_softirq+0x30c/0xb03 kernel/softirq.c:292

Freed by task 16383:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521
kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
__cache_free mm/slab.c:3498 [inline]
kmem_cache_free+0x83/0x290 mm/slab.c:3756
kfree_skbmem+0x154/0x230 net/core/skbuff.c:582
__kfree_skb+0x1d/0x20 net/core/skbuff.c:642
sk_eat_skb include/net/sock.h:2366 [inline]
llc_ui_recvmsg+0xec2/0x1610 net/llc/af_llc.c:882
sock_recvmsg_nosec net/socket.c:794 [inline]
sock_recvmsg+0xd0/0x110 net/socket.c:801
___sys_recvmsg+0x2b6/0x680 net/socket.c:2278
__sys_recvmmsg+0x303/0xb90 net/socket.c:2390
do_sys_recvmmsg+0x181/0x1a0 net/socket.c:2466
__do_sys_recvmmsg net/socket.c:2484 [inline]
__se_sys_recvmmsg net/socket.c:2480 [inline]
__x64_sys_recvmmsg+0xbe/0x150 net/socket.c:2480
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8801d1f6fac0
which belongs to the cache skbuff_head_cache of size 232
The buggy address is located 228 bytes inside of
232-byte region [ffff8801d1f6fac0, ffff8801d1f6fba8)
The buggy address belongs to the page:
page:ffffea000747dbc0 count:1 mapcount:0 mapping:ffff8801d9be7680 index:0xffff8801d1f6fe80
flags: 0x2fffc0000000100(slab)
raw: 02fffc0000000100 ffffea0007346e88 ffffea000705b108 ffff8801d9be7680
raw: ffff8801d1f6fe80 ffff8801d1f6f0c0 000000010000000b 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff8801d1f6fa80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
ffff8801d1f6fb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8801d1f6fb80: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc
^
ffff8801d1f6fc00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8801d1f6fc80: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gfs2: Don't leave s_fs_info pointing to freed memory in init_sbd

commit 4c62bd9cea7bcf10292f7e4c57a2bca332942697 upstream.

When alloc_percpu() fails, sdp gets freed but sb->s_fs_info still points
to the same address. Move the assignment after that error check so that
s_fs_info can only point to a valid sdp or NULL, which is checked for
later in the error path, in gfs2_kill_super().

Reported-by: syzbot+dcb8b3587445007f5808@syzkaller.appspotmail.com
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: clear the transport of some out_chunk_list chunks in sctp_assoc_rm_peer

commit df132eff463873e14e019a07f387b4d577d6d1f9 upstream.

If a transport is removed by asconf but there still are some chunks with
this transport queuing on out_chunk_list, later an use-after-free issue
will be caused when accessing this transport from these chunks in
sctp_outq_flush().

This is an old bug, we fix it by clearing the transport of these chunks
in out_chunk_list when removing a transport in sctp_assoc_rm_peer().

Reported-by: syzbot+56a40ceee5fb35932f4d@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bfs: add sanity check at bfs_fill_super()

commit 9f2df09a33aa2c76ce6385d382693f98d7f2f07e upstream.

syzbot is reporting too large memory allocation at bfs_fill_super() [1].
Since file system image is corrupted such that bfs_sb->s_start == 0,
bfs_fill_super() is trying to allocate 8MB of continuous memory. Fix
this by adding a sanity check on bfs_sb->s_start, __GFP_NOWARN and
printf().

[1] https://syzkaller.appspot.com/bug?id=16a87c236b951351374a84c8a32f40edbc034e96

Link: http://lkml.kernel.org/r/1525862104-3407-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+71c6b5d68e91149fc8a4@syzkaller.appspotmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Tigran Aivazian <aivazian.tigran@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: synaptics - avoid using uninitialized variable when probing

commit f39f8688888ae74fa8deae2d01289b69b4727394 upstream.

synaptics_detect() does not check whether sending commands to the
device succeeds and instead relies on getting unique data from the
device. Let's make sure we seed entire buffer with zeroes to make sure
we will not use garbage on stack that just happen to be 0x47.

Reported-by: syzbot+13cb3b01d0784e4ffc3f@syzkaller.appspotmail.com
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: Add __GFP_NOWARN to allocation at str_read()

commit 4458bba09788e70e8fb39ad003f087cd9dfbd6ac upstream.

syzbot is hitting warning at str_read() [1] because len parameter can
become larger than KMALLOC_MAX_SIZE. We don't need to emit warning for
this case.

[1] https://syzkaller.appspot.com/bug?id=7f2f5aad79ea8663c296a2eedb81978401a908f0

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+ac488b9811036cea7ea0@syzkaller.appspotmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

v9fs_dir_readdir: fix double-free on p9stat_read error

commit 81c99089bce693b94b775b6eb888115d2d540086 upstream.

p9stat_read will call p9stat_free on error, we should only free the
struct content on success.

There also is no need to "p9stat_init" st as the read function will
zero the whole struct for us anyway, so clean up the code a bit while
we are here.

Link: http://lkml.kernel.org/r/1535410108-20650-1-git-send-email-asmadeus@codewreck.org
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Reported-by: syzbot+d4252148d198410b864f@syzkaller.appspotmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/power/cpupower: fix compilation with STATIC=true

commit 9de9aa45e9bd67232e000cca42ceb134b8ae51b6 upstream.

Rename duplicate sysfs_read_file into cpupower_read_sysfs and fix linking.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Thomas Renninger <trenn@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

brcmfmac: fix reporting support for 160 MHz channels

commit d1fe6ad6f6bd61c84788d3a7b11e459a439c6169 upstream.

Driver can report IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ so it's
important to provide valid & complete info about supported bands for
each channel. By default no support for 160 MHz should be assumed unless
firmware reports it for a given channel later.

This fixes info passed to the userspace. Without that change userspace
could try to use invalid channel and fail to start an interface.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Cc: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm: don't use SAR Geo if basic SAR is not used

commit 5d041c46ccb9b48acc110e214beff5e2789311df upstream.

We can't use SAR Geo if basic SAR is not enabled, since the SAR Geo
tables define offsets in relation to the basic SAR table in use.

To fix this, make iwl_mvm_sar_init() return one in case WRDS is not
available, so we can skip reading WGDS entirely.

Fixes: a6bff3cb19b7 ("iwlwifi: mvm: add GEO_TX_POWER_LIMIT cmd for geographic tx power table")
Cc: stable@vger.kernel.org # 4.12+
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm: fix regulatory domain update when the firmware starts

commit 82715ac71e6b94a2c2136e31f3a8e6748e33aa8c upstream.

When the firmware starts, it doesn't have any regulatory
information, hence it uses the world wide limitations. The
driver can feed the firmware with previous knowledge that
was kept in the driver, but the firmware may still not
update its internal tables.

This happens when we start a BSS interface, and then the
firmware can change the regulatory tables based on our
location and it'll use more lenient, location specific
rules. Then, if the firmware is shut down (when the
interface is brought down), and then an AP interface is
created, the firmware will forget the country specific
rules.

The host will think that we are in a certain country that
may allow channels and will try to teach the firmware about
our location, but the firmware may still not allow to drop
the world wide limitations and apply country specific rules
because it was just re-started.

In this case, the firmware will reply with MCC_RESP_ILLEGAL
to the MCC_UPDATE_CMD. In that case, iwlwifi needs to let
the upper layers (cfg80211 / hostapd) know that the channel
list they know about has been updated.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201105

Cc: stable@vger.kernel.org
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm: support sta_statistics() even on older firmware

commit ec484d03ef0df8d34086b95710e355a259cbe1f2 upstream.

The oldest firmware supported by iwlmvm do support getting
the average beacon RSSI. Enable the sta_statistics() call
from mac80211 even on older firmware versions.

Fixes: 33cef9256342 ("iwlwifi: mvm: support beacon statistics for BSS client")
Cc: stable@vger.kernel.org # 4.2+
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: don't free unallocated ida on gpiochip_add_data_with_key() error path

commit a05a14049999598a3bb6fab12db6b768a0215522 upstream.

The change corrects the error path in gpiochip_add_data_with_key()
by avoiding to call ida_simple_remove(), if ida_simple_get() returns
an error.

Note that ida_simple_remove()/ida_free() throws a BUG(), if id argument
is negative, it allows to easily check the correctness of the fix by
fuzzing the return value from ida_simple_get().

Fixes: ff2b13592299 ("gpio: make the gpiochip a real device")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-pci: Try "cd" for card-detect lookup before using NULL

commit cdcefe6bd9df754f528ffc339d3cc143cea4ddf6 upstream.

Problem:

The card detect IRQ does not work with modern BIOS (that want
to use _DSD to provide the card detect GPIO to the driver).

Details:

The mmc core provides the mmc_gpiod_request_cd() API to let host drivers
request the gpio descriptor for the "card detect" pin.
This pin is specified in the ACPI for the SDHC device:

* Either as a resource using _CRS. This is a method used by legacy BIOS.
   (The driver needs to tell which resource index).

* Or as a named property ("cd-gpios"/"cd-gpio") in _DSD (which internally
   points to an entry in _CRS). This way, the driver can lookup using a
   string. This is what modern BIOS prefer to use.

This API finally results in a call to the following code:

struct gpio_desc *acpi_find_gpio(..., const char *con_id,...)
{
...
   /* Lookup gpio (using "<con_id>-gpio") in the _DSD */
...
   if (!acpi_can_fallback_to_crs(adev, con_id))
          return ERR_PTR(-ENOENT);
...
   /* Falling back to _CRS is allowed, Lookup gpio in the _CRS */
...
}

Note that this means that if the ACPI has _DSD properties, the kernel
will never use _CRS for the lookup (Because acpi_can_fallback_to_crs()
will always be false for any device hat has _DSD entries).

The SDHCI driver is thus currently broken on a modern BIOS, even if
BIOS provides both _CRS (for index based lookup) and _DSD entries (for
string based lookup). Ironically, none of these will be used for the
lookup currently because:

* Since the con_id is NULL, acpi_find_gpio() does not find a matching
  entry in DSDT. (The _DSDT entry has the property name = "cd-gpios")

* Because ACPI contains DSDT entries, thus acpi_can_fallback_to_crs()
  returns false (because device properties have been populated from
  _DSD), thus the _CRS is never used for the lookup.

Fix:

Try "cd" for lookup in the _DSD before falling back to using NULL so
as to try looking up in the _CRS.

I've tested this patch successfully with both Legacy BIOS (that
provide only _CRS method) as well as modern BIOS (that provide both
_CRS and _DSD). Also the use of "cd" appears to be fairly consistent
across other users of this API (other MMC host controller drivers).

Link: https://lkml.org/lkml/2018/9/25/1113
Signed-off-by: Rajat Jain <rajatja@google.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: f10e4bf6632b ("gpio: acpi: Even more tighten up ACPI GPIO lookups")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MAINTAINERS: Add Sasha as a stable branch maintainer

commit cb5d21946d2a2f4687c482ab4604af1d29dac35a upstream.

Sasha has somehow been convinced into helping me with the stable kernel
maintenance. Codify this slip in good judgement before he realizes what
he really signed up for :)

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: oss: Use kvzalloc() for local buffer allocations

commit 65766ee0bf7fe8b3be80e2e1c3ef54ad59b29476 upstream.

PCM OSS layer may allocate a few temporary buffers, one for the core
read/write and another for the conversions via plugins.  Currently
both are allocated via vmalloc().  But as the allocation size is
equivalent with the PCM period size, the required size might be quite
small, depending on the application.

This patch replaces these vmalloc() calls with kvzalloc() for covering
small period sizes better.  Also, we use "z"-alloc variant here for
addressing the possible uninitialized access reported by syzkaller.

Reported-by: syzbot+1cb36954e127c98dd037@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: fix timeout for transition from RExit to U0

commit a5baeaeabcca3244782a9b6382ebab6f8a58f583 upstream.

This definition is used by msecs_to_jiffies in milliseconds.
According to the comments, max rexit timeout should be 20ms.
Align with the comments to properly calculate the delay.

Verified on Sunrise Point-LP and Cannon Lake.

Cc: stable@vger.kernel.org
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Add check for invalid byte size error when UAS devices are connected.

commit d9193efba84fe4c4aa22a569fade5e6ca971f8af upstream.

Observed "TRB completion code (27)" error which corresponds to Stopped -
Length Invalid error(xhci spec section 4.17.4) while connecting USB to
SATA bridge.

Looks like this case was not considered when the following patch[1] was
committed. Hence adding this new check which can prevent
the invalid byte size error.

[1] ade2e3a xhci: handle transfer events without TRB pointer

Cc: <stable@vger.kernel.org>
Signed-off-by: Sandeep Singh <sandeep.singh@amd.com>
cc: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: core: Clean up ULPI device

commit 08fd9a82fda86529bb2f2af3c2f7cb657b4d3066 upstream.

If dwc3_core_init_mode() fails with deferred probe,
next probe fails on sysfs with

sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:11.0/dwc3.0.auto/dwc3.0.auto.ulpi'

To avoid this failure, clean up ULPI device.

Cc: <stable@vger.kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: Properly check last unaligned/zero chain TRB

commit ba3a51ac32ebcf8d0a54b37f1af268ad8a31c52f upstream.

Current check for the last extra TRB for zero and unaligned transfers
does not account for isoc OUT. The last TRB of the Buffer Descriptor for
isoc OUT transfers will be retired with HWO=0. As a result, we won't
return early. The req->remaining will be updated to include the BUFSIZ
count of the extra TRB, and the actual number of transferred bytes
calculation will be wrong.

To fix this, check whether it's a short or zero packet and the last TRB
chain bit to return early.

Fixes: c6267a51639b ("usb: dwc3: gadget: align transfers to wMaxPacketSize")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: fix ISOC TRB type on unaligned transfers

commit 2fc6d4be35fb1e262f209758e25bfe2b7a113a7f upstream.

When chaining ISOC TRBs together, only the first ISOC TRB should be of
type ISOC_FIRST, all others should be of type ISOC. This patch fixes
that.

Fixes: c6267a51639b ("usb: dwc3: gadget: align transfers to wMaxPacketSize")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: core: Fix hub port connection events lost

commit 22454b79e6de05fa61a2a72d00d2eed798abbb75 upstream.

This will clear the USB_PORT_FEAT_C_CONNECTION bit in case of a hub port reset
only if a device is was attached to the hub port before resetting the hub port.

Using a Lenovo T480s attached to the ultra dock it was not possible to detect
some usb-c devices at the dock usb-c ports because the hub_port_reset code
will clear the USB_PORT_FEAT_C_CONNECTION bit after the actual hub port reset.
Using this device combo the USB_PORT_FEAT_C_CONNECTION bit was set between the
actual hub port reset and the clear of the USB_PORT_FEAT_C_CONNECTION bit.
This ends up with clearing the USB_PORT_FEAT_C_CONNECTION bit after the
new device was attached such that it was not detected.

This patch will not clear the USB_PORT_FEAT_C_CONNECTION bit if there is
currently no device attached to the port before the hub port reset.
This will avoid clearing the connection bit for new attached devices.

Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: trusted_foundations: do not use naked function

(commit 4ea7bdc6b5b33427bbd3f41c333e21c1825462a3 upstream)

As documented in GCC naked functions should only use basic ASM
syntax. The extended ASM or mixture of basic ASM and "C" code is
not guaranteed. Currently this works because it was hard coded
to follow and check GCC behavior for arguments and register
placement.

Furthermore with clang using parameters in Extended asm in a
naked function is not supported:
  arch/arm/firmware/trusted_foundations.c:47:10: error: parameter
          references not allowed in naked functions
                : "r" (type), "r" (arg1), "r" (arg2)
                       ^

Use a regular function to be more portable. This aligns also with
the other SMC call implementations e.g. in qcom_scm-32.c and
bcm_kona_smc.c.

Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: arm-cci: remove unnecessary unreachable()

(commit 10d8713429d345867fc8998d6193b233c0cab28c upstream)

Mixing asm and C code is not recommended in a naked function by
gcc and leads to an error when using clang:
  drivers/bus/arm-cci.c:2107:2: error: non-ASM statement in naked
  function is not supported
        unreachable();
        ^

While the function is marked __naked it actually properly return
in asm. There is no need for the unreachable() call.

GCC 7.2 generates identical object files before and after, other
than (for obvious reasons) the line numbers generated by
WANT_WARN_ON_SLOWPATH for all the WARN()s appearing later in the
file.

Suggested-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 8767/1: add support for building ARM kernel with clang

(commit c1c386681bd73c4fc28eb5cc91cf8b7be9b409ba upstream)

Use cc-options call for compiler options which are not available
in clang. With this patch an ARMv7 multi platform kernel can be
successfully build using clang (tested with version 5.0.1).

Based-on-patches-by: Behan Webster <behanw@converseincode.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 8766/1: drop no-thumb-interwork in EABI mode

(commit 22905a24306c8c312c2d66da9f90d09af0414f81 upstream)

According to GCC documentation -m(no-)thumb-interwork is
meaningless in AAPCS configurations. Also clang does not
support the flag:
clang-5.0: error: unknown argument: '-mno-thumb-interwork'

Just drop -mno-thumb-interwork in AEABI configuration.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi/libstub: arm: support building with clang

(commit 41f1c48420709470c51ee0e54b6fb28b956bb4e0 upstream)

When building with CONFIG_EFI and CONFIG_EFI_STUB on ARM, the libstub
Makefile would use -mno-single-pic-base without checking it was
supported by the compiler. As the ARM (32-bit) clang backend does not
support this flag, the build would fail.

This changes the Makefile to check the compiler's support for
-mno-single-pic-base before using it, similar to c1c386681bd7 ("ARM:
8767/1: add support for building ARM kernel with clang").

Signed-off-by: Alistair Strachan <astrachan@google.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[ND: adjusted due to missing commit ce279d374ff3 ("efi/libstub:
Only disable stackleak plugin for arm64")]
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.84

libceph: fall back to sendmsg for slab pages

commit 7e241f647dc7087a0401418a187f3f5b527cc690 upstream.

skb_can_coalesce() allows coalescing neighboring slab objects into
a single frag:

  return page == skb_frag_page(frag) &&
         off == frag->page_offset + skb_frag_size(frag);

ceph_tcp_sendpage() can be handed slab pages.  One example of this is
XFS: it passes down sector sized slab objects for its metadata I/O.  If
the kernel client is co-located on the OSD node, the skb may go through
loopback and pop on the receive side with the exact same set of frags.
When tcp_recvmsg() attempts to copy out such a frag, hardened usercopy
complains because the size exceeds the object's allocated size:

  usercopy: kernel memory exposure attempt detected from ffff9ba917f20a00 (kmalloc-512) (1024 bytes)

Although skb_can_coalesce() could be taught to return false if the
resulting frag would cross a slab object boundary, we already have
a fallback for non-refcounted pages.  Utilize it for slab pages too.

Cc: stable@vger.kernel.org # 4.8+
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: uhid: forbid UHID_CREATE under KERNEL_DS or elevated privileges

commit 8c01db7619f07c85c5cd81ec5eb83608b56c88f5 upstream.

When a UHID_CREATE command is written to the uhid char device, a
copy_from_user() is done from a user pointer embedded in the command.
When the address limit is KERNEL_DS, e.g. as is the case during
sys_sendfile(), this can read from kernel memory. Alternatively,
information can be leaked from a setuid binary that is tricked to write
to the file descriptor. Therefore, forbid UHID_CREATE in these cases.

No other commands in uhid_char_write() are affected by this bug and
UHID_CREATE is marked as "obsolete", so apply the restriction to
UHID_CREATE only rather than to uhid_char_write() entirely.

Thanks to Dmitry Vyukov for adding uhid definitions to syzkaller and to
Jann Horn for commit 9da3f2b740544 ("x86/fault: BUG() when uaccess
helpers fault on kernel addresses"), allowing this bug to be found.

Reported-by: syzbot+72473edc9bf4eb1c6556@syzkaller.appspotmail.com
Fixes: d365c6cfd337 ("HID: uhid: add UHID_CREATE and UHID_DESTROY events")
Cc: <stable@vger.kernel.org> # v3.6+
Cc: Jann Horn <jannh@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / platform: Add SMB0001 HID to forbidden_id_list

commit 2bbb5fa37475d7aa5fa62f34db1623f3da2dfdfa upstream.

Many HP AMD based laptops contain an SMB0001 device like this:

Device (SMBD)
{
    Name (_HID, "SMB0001")  // _HID: Hardware ID
    Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
    {
        IO (Decode16,
            0x0B20,             // Range Minimum
            0x0B20,             // Range Maximum
            0x20,               // Alignment
            0x20,               // Length
            )
        IRQ (Level, ActiveLow, Shared, )
            {7}
    })
}

The legacy style IRQ resource here causes acpi_dev_get_irqresource() to
be called with legacy=true and this message to show in dmesg:
ACPI: IRQ 7 override to edge, high

This causes issues when later on the AMD0030 GPIO device gets enumerated:

Device (GPIO)
{
    Name (_HID, "AMDI0030")  // _HID: Hardware ID
    Name (_CID, "AMDI0030")  // _CID: Compatible ID
    Name (_UID, Zero)  // _UID: Unique ID
    Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
    {
Name (RBUF, ResourceTemplate ()
{
    Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, )
    {
0x00000007,
    }
    Memory32Fixed (ReadWrite,
0xFED81500,         // Address Base
0x00000400,         // Address Length
)
})
Return (RBUF) /* \_SB_.GPIO._CRS.RBUF */
    }
}

Now acpi_dev_get_irqresource() gets called with legacy=false, but because
of the earlier override of the trigger-type acpi_register_gsi() returns
-EBUSY (because we try to register the same interrupt with a different
trigger-type) and we end up setting IORESOURCE_DISABLED in the flags.

The setting of IORESOURCE_DISABLED causes platform_get_irq() to call
acpi_irq_get() which is not implemented on x86 and returns -EINVAL.
resulting in the following in dmesg:

amd_gpio AMDI0030:00: Failed to get gpio IRQ: -22
amd_gpio: probe of AMDI0030:00 failed with error -22

The SMB0001 is a "virtual" device in the sense that the only way the OS
interacts with it is through calling a couple of methods to do SMBus
transfers. As such it is weird that it has IO and IRQ resources at all,
because the driver for it is not expected to ever access the hardware
directly.

The Linux driver for the SMB0001 device directly binds to the acpi_device
through the acpi_bus, so we do not need to instantiate a platform_device
for this ACPI device. This commit adds the SMB0001 HID to the
forbidden_id_list, avoiding the instantiating of a platform_device for it.
Not instantiating a platform_device means we will no longer call
acpi_dev_get_irqresource() for the legacy IRQ resource fixing the probe of
the AMDI0030 device failing.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1644013
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198715
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199523
Reported-by: Lukas Kahnert <openproggerfreak@gmail.com>
Tested-by: Marc <suaefar@googlemail.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/misc/sgi-gru: fix Spectre v1 vulnerability

commit fee05f455ceb5c670cbe48e2f9454ebc4a388554 upstream.

req.gid can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

vers/misc/sgi-gru/grukdump.c:200 gru_dump_chiplet_request() warn:
potential spectre issue 'gru_base' [w]

Fix this by sanitizing req.gid before calling macro GID_TO_GRU, which
uses it to index gru_base.

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: misc: appledisplay: add 20" Apple Cinema Display

commit f6501f49199097b99e4e263644d88c90d1ec1060 upstream.

Add another Apple Cinema Display to the list of supported displays

Signed-off-by: Mattias Jacobsson <2pi@mok.nu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: atmel-ssc: Fix section annotation on atmel_ssc_get_driver_data

commit 7c97301285b62a41d6bceded7d964085fc8cc50f upstream.

After building the kernel with Clang, the following section mismatch
warning appears:

WARNING: vmlinux.o(.text+0x3bf19a6): Section mismatch in reference from
the function ssc_probe() to the function
.init.text:atmel_ssc_get_driver_data()
The function ssc_probe() references
the function __init atmel_ssc_get_driver_data().
This is often because ssc_probe lacks a __init
annotation or the annotation of atmel_ssc_get_driver_data is wrong.

Remove __init from atmel_ssc_get_driver_data to get rid of the mismatch.

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: quirks: Add delay-init quirk for Corsair K70 LUX RGB

commit a77112577667cbda7c6292c52d909636aef31fd9 upstream.

Following on from this patch: https://lkml.org/lkml/2017/11/3/516,
Corsair K70 LUX RGB keyboards also require the DELAY_INIT quirk to
start correctly at boot.

Dmesg output:
usb 1-6: string descriptor 0 read error: -110
usb 1-6: New USB device found, idVendor=1b1c, idProduct=1b33
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: can't set config #1, error -110

Signed-off-by: Emmanuel Pescosta <emmanuelpescosta099@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: quirks: Add no-lpm quirk for Raydium touchscreens

commit deefd24228a172d1b27d4a9adbfd2cdacd60ae64 upstream.

Raydium USB touchscreen fails to set config if LPM is enabled:
[    2.030658] usb 1-8: New USB device found, idVendor=2386, idProduct=3119
[    2.030659] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.030660] usb 1-8: Product: Raydium Touch System
[    2.030661] usb 1-8: Manufacturer: Raydium Corporation
[    7.132209] usb 1-8: can't set config #1, error -110

Same behavior can be observed on 2386:3114.

Raydium claims the touchscreen supports LPM under Windows, so I used
Microsoft USB Test Tools (MUTT) [1] to check its LPM status. MUTT shows
that the LPM doesn't work under Windows, either. So let's just disable LPM
for Raydium touchscreens.

[1] https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/usb-test-tools

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdc-acm: add entry for Hiro (Conexant) modem

commit 63529eaa6164ef7ab4b907b25ac3648177e5e78f upstream.

The cdc-acm kernel module currently does not support the Hiro (Conexant)
H05228 USB modem. The patch below adds the device specific information:
idVendor 0x0572
idProduct 0x1349

Signed-off-by: Maarten Jacobs <maarten256@outlook.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>