andy.hu [Thu, 11 Aug 2022 15:03:16 +0000 (15:03 +0000)]
Merge branch 'CR_1675_SEC_jiajie.ho' into 'jh7110-5.15.y-devel'
CR_1675:crypto:starfive: Add iv_out read after encryption
See merge request sdk/linux!375
andy.hu [Thu, 11 Aug 2022 14:57:11 +0000 (14:57 +0000)]
Merge branch 'CR_1582_515_evb_drm_RGB_offset_lastline_color_bar_keith.zhao' into 'jh7110-5.15.y-devel'
Driver:DRM:RGB
See merge request sdk/linux!373
andy.hu [Thu, 11 Aug 2022 14:52:04 +0000 (14:52 +0000)]
Merge branch 'CR_1767_v4l2_515_changhuang.liang' into 'jh7110-5.15.y-devel'
CR_1767_v4l2_515_changhuang.liang
See merge request sdk/linux!369
andy.hu [Thu, 11 Aug 2022 14:35:28 +0000 (14:35 +0000)]
Merge branch 'CR_1776_RTC_hal.feng' into 'jh7110-5.15.y-devel'
Cr 1776 rtc hal.feng
See merge request sdk/linux!370
andy.hu [Thu, 11 Aug 2022 14:26:53 +0000 (14:26 +0000)]
Merge branch 'CR_1779_v4l2_515_changhuang.liang' into 'jh7110-5.15.y-devel'
CR_1779_v4l2_515_changhuang.liang
See merge request sdk/linux!361
andy.hu [Thu, 11 Aug 2022 14:17:14 +0000 (14:17 +0000)]
Merge branch 'CR_1789_v4l2_515_changhuang.liang' into 'jh7110-5.15.y-devel'
CR_1789_v4l2_515_changhuang.liang
See merge request sdk/linux!367
jiajie.ho [Wed, 10 Aug 2022 07:39:41 +0000 (15:39 +0800)]
CR_1675:crypto:starfive: Add iv_out read after encryption
Add iv_out read required by Linux Self Test from hw engine
after AES encryption has been completed.
Signed-off-by: jiajie.ho <jiajie.ho@starfivetech.com>
keith.zhao [Wed, 10 Aug 2022 03:30:06 +0000 (20:30 -0700)]
Driver:DRM:RGB
fix tda display issue : offset , last line , colorbar
Signed-off-by: keith <keith.zhao@statfivetech.com>
Hal Feng [Sat, 6 Aug 2022 11:02:08 +0000 (19:02 +0800)]
rtc: starfive: Fix time may be not updated when date updated
Register RTC_TIME/DATE updates when bit IRQ_STATUS.IRQ_1SEC rises.
If RTC_TIME is read when IRQ_STATUS.IRQ_1SEC is low and RTC_DATE is
read when IRQ_STATUS.IRQ_1SEC is high, the mismatched problem happens.
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Hal Feng [Thu, 4 Aug 2022 01:19:07 +0000 (09:19 +0800)]
rtc: starfive: Fix command 'hwclock' can't work in rootfs
Read time from register RTC_TIME/RTC_DATE (0x3C/0x40) instead
of RTC_TIME_LATCH/RTC_DATE_LATCH (0x44/0x48)
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
changhuang.liang [Mon, 8 Aug 2022 08:27:39 +0000 (16:27 +0800)]
v4l2: fixed imx219 set 720p error
imx219 add 720p and delete greater than 1080p frame size
Signed-off-by: changhuang.liang <changhuang.liang@starfivetech.com>
Jason Zhou [Fri, 5 Aug 2022 10:08:40 +0000 (10:08 +0000)]
Merge branch 'CR_1286_add_wayland_with_gpu_support_Windsome.Zeng' into 'jh7110-5.15.y-devel'
CR_1286_1793: Add Wayland with GPU support
See merge request sdk/linux!358
changhuang.liang [Fri, 5 Aug 2022 09:48:27 +0000 (17:48 +0800)]
v4l2: modify ov4689 stream on process
ov4689 stream on dont need mdalay
Signed-off-by: changhuang.liang <changhuang.liang@starfivetech.com>
Jason Zhou [Fri, 5 Aug 2022 09:38:10 +0000 (09:38 +0000)]
Merge branch 'CR_1314_DRM_INNO_Screen_compatibility_Keith.zhao' into 'jh7110-5.15.y-devel'
Cr 1314 drm inno screen compatibility keith.zhao
See merge request sdk/linux!357
Windsome Zeng [Tue, 21 Jun 2022 06:02:33 +0000 (14:02 +0800)]
Add Wayland with GPU support.
use lws-generic to support wayland
Signed-off-by: Windsome Zeng <Windsome.Zeng@starfivetech.com>
Jason Zhou [Fri, 5 Aug 2022 04:20:43 +0000 (04:20 +0000)]
Merge branch 'CR_1797_PCIe_Kevin.xie' into 'jh7110-5.15.y-devel'
CR_1797 riscv: configs: Disable PCIe ASPM mode
See merge request sdk/linux!355
Jason Zhou [Fri, 5 Aug 2022 03:00:23 +0000 (03:00 +0000)]
Merge branch 'CR_1754_usb_device_mass_storage_minda' into 'jh7110-5.15.y-devel'
CR_1754 usb: gadget: add usb device mass storage support
See merge request sdk/linux!341
Jason Zhou [Fri, 5 Aug 2022 02:52:41 +0000 (02:52 +0000)]
Merge branch 'CR_984_AC108_515_curry.zhang' into 'jh7110-5.15.y-devel'
CR_984_AC108 [Audio: I2S] Porting I2S interface audio codec AC108
See merge request sdk/linux!346
Jason Zhou [Fri, 5 Aug 2022 02:50:58 +0000 (02:50 +0000)]
Merge branch 'CR_1314_DRM_INNO_Screen_compatibility_Keith.zhao' into 'jh7110-5.15.y-devel'
Cr 1314 drm inno screen compatibility keith.zhao
See merge request sdk/linux!339
Kevin.xie [Fri, 5 Aug 2022 02:00:53 +0000 (10:00 +0800)]
riscv: configs: Disable PCIe ASPM mode
Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
Jason Zhou [Thu, 4 Aug 2022 10:50:36 +0000 (10:50 +0000)]
Merge branch 'CR_1781_515_USB20_jianlong' into 'jh7110-5.15.y-devel'
CR_1781 dts: starfive: enable usb2.0 when use pcie0
See merge request sdk/linux!352
Jason Zhou [Thu, 4 Aug 2022 10:48:32 +0000 (10:48 +0000)]
Merge branch 'CR_1687_GMAC_515_yanhong.wang' into 'jh7110-5.15.y-devel'
Cr 1687 gmac 515 yanhong.wang
See merge request sdk/linux!351
Jason Zhou [Thu, 4 Aug 2022 10:45:38 +0000 (10:45 +0000)]
Merge branch 'CR_1705_TDM_32bit_48k_NotWork_walker.chen' into 'jh7110-5.15.y-devel'
CR_1705_TDM_32bit: fix 48k not work and can support 8k sample rate
See merge request sdk/linux!347
Jason Zhou [Thu, 4 Aug 2022 10:40:08 +0000 (10:40 +0000)]
Merge branch 'CR_1764_RTC_hal.feng' into 'jh7110-5.15.y-devel'
Cr 1764 rtc hal.feng
See merge request sdk/linux!343
Jason Zhou [Thu, 4 Aug 2022 10:36:14 +0000 (10:36 +0000)]
Merge branch 'CR_1734_5.15_SPDIF_singlechannel_Xingyu.Wu' into 'jh7110-5.15.y-devel'
CR_1734 & CR_1571 :5.15:spdif: Add single-channel and fix 24bit
See merge request sdk/linux!335
curry.zhang [Mon, 1 Aug 2022 08:16:31 +0000 (01:16 -0700)]
[Audio: I2S] Porting I2S interface audio codec AC108
1. porting I2S interface audio codec AC108
2. change clock api in dw_i2s_hw_params function
Signed-off-by: curry.zhang <curry.zhang@starfivetech.com>
Jianlong Huang [Wed, 3 Aug 2022 08:11:40 +0000 (16:11 +0800)]
dts: starfive: enable usb2.0 when use pcie0
Enable usb2.0
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Xingyu Wu [Mon, 1 Aug 2022 07:59:36 +0000 (15:59 +0800)]
sound:starfive:spdif:Adjust mclk rate under 22.05k sample rate
Change audio_root clock's rate and make spdif_core clock
close to the required frequency of 22.05k.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
changhuang.liang [Wed, 3 Aug 2022 06:40:54 +0000 (14:40 +0800)]
v4l2: modify enum framesize error
modify enum framesize error
Signed-off-by: changhuang.liang <changhuang.liang@starfivetech.com>
yanhong.wang [Wed, 3 Aug 2022 01:58:37 +0000 (09:58 +0800)]
riscv:dts:jh7110: Add YT8521 phy delay_chain configuration
Some gmac is not working with YT8521 PHY default delay configuration, so
add phy node to set delay config..
Signed-off-by: yanhong.wang <yanhong.wang@starfivetech.com>
yanhong.wang [Wed, 3 Aug 2022 02:40:40 +0000 (10:40 +0800)]
net:phy:YUTAI: Update YUTAI PHY driver
Update YUTAI phy driver to support more type, such as YT8531,YT8510 etc.
Signed-off-by: yanhong.wang <yanhong.wang@starfivetech.com>
keith.zhao [Tue, 2 Aug 2022 19:16:30 +0000 (03:16 +0800)]
riscv:linux:vout:inno hdmi
1 Solve inno hdmi screen compatibility issue , roll back last commit, turn off bist mode
2 solve rgb gradient color bar issue
Signed-off-by: keith <keith.zhao@starfivetech.com>
keith.zhao [Tue, 2 Aug 2022 18:06:01 +0000 (02:06 +0800)]
rgb offset issue fixed
Walker Chen [Mon, 1 Aug 2022 15:12:21 +0000 (23:12 +0800)]
CR_1705_TDM_32bit: fix 48k not work and can support 8k sample rate
1. Fix 48k sample rate not work.
2. Support 8k sample rate when using 32bit.
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
keith.zhao [Mon, 1 Aug 2022 14:25:44 +0000 (22:25 +0800)]
replace func interface
Xingyu Wu [Sat, 30 Jul 2022 10:29:12 +0000 (18:29 +0800)]
sound:starfive:spdif:Remove apb0 clock controller
apb0 is the parent of spdif-apb clock and it should
not be got and enabled. And audio_root and mclk_inner
is divider clock, they should not be enabled.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Xingyu Wu [Fri, 29 Jul 2022 10:38:54 +0000 (18:38 +0800)]
sound:starfive:spdif:Add S24_3LE
support audio files of 24 bit in 3bytes.
To adapt S24_3LE and ALSA pass parameter of S24_LE.
Data operation of S24_LE should be same to S24_3LE.
So it would wrong when playback S24_LE file.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Ley Foon Tan [Tue, 19 Jul 2022 02:20:49 +0000 (02:20 +0000)]
rtc: starfive: Moves RTC_DRV_STARFIVE to Platform RTC drivers category
Moves RTC_DRV_STARFIVE to "Platform RTC drivers" category from
"on-CPU RTC drivers".
Signed-off-by: Ley Foon Tan <leyfoon.tan@linux.starfivetech.com>
Ley Foon Tan [Tue, 19 Jul 2022 02:15:51 +0000 (02:15 +0000)]
rtc: starfive: Update depends on to SOC_STARFIVE
Change depends on to SOC_STARFIVE instead of RISCV.
Signed-off-by: Ley Foon Tan <leyfoon.tan@linux.starfivetech.com>
minda.chen [Fri, 29 Jul 2022 05:29:18 +0000 (13:29 +0800)]
usb: gadget: add usb device mass storage and functinfs support
USB mass storage and functionfs activated by configfs.
Support both 2.0 and 3.0.
Signed-off-by: minda.chen <minda.chen@starfivetech.com>
Jason Zhou [Fri, 29 Jul 2022 08:40:16 +0000 (08:40 +0000)]
Merge branch 'CR_1558_USBHost_515_mason.huo' into 'jh7110-5.15.y-devel'
Cr 1558 usb host 515 mason.huo
See merge request sdk/linux!338
mason.huo [Fri, 29 Jul 2022 03:41:06 +0000 (11:41 +0800)]
riscv: dts: Add Naneng usb2 phy base
Add the Naneng usb2 phy base config, so that
driver can access the Naneng usb phy registers.
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
mason.huo [Fri, 29 Jul 2022 02:44:45 +0000 (10:44 +0800)]
usb: cdns3: Enable LS keep-alive signal
The default naneng phy setting of LS keep-alive
is not enabled, that will cause some usb mouse
(Lenovo sm8823) does not work properly.
Also some usb keyboards can not enumerated.
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
Xingyu Wu [Thu, 28 Jul 2022 06:54:32 +0000 (14:54 +0800)]
sound:starfive:spdif:Modify format
Modify files' format and remove capture.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Xingyu Wu [Thu, 28 Jul 2022 06:03:20 +0000 (14:03 +0800)]
sound:starfive:spdif:Add single-channel
Spdif supports single-channel audio playback.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Jason Zhou [Thu, 28 Jul 2022 03:43:35 +0000 (03:43 +0000)]
Merge branch 'CR_1715_USB_515_Kevin.xie' into 'jh7110-5.15.y-devel'
CR_1715 dts: starfive: Modified vbus enable pin function to be GPO_HIGH
See merge request sdk/linux!327
Jason Zhou [Thu, 28 Jul 2022 03:05:21 +0000 (03:05 +0000)]
Merge branch 'CR_1735_TDM_32bit_Compatible_walker.chen' into 'jh7110-5.15.y-devel'
CR_1735_TDM: meet compatible test
See merge request sdk/linux!334
Jason Zhou [Thu, 28 Jul 2022 02:55:55 +0000 (02:55 +0000)]
Merge branch 'CR_1278_v4l2_515_changhuang.liang' into 'jh7110-5.15.y-devel'
CR_1278_v4l2: fixed imx219 date error at the first line
See merge request sdk/linux!330
Jason Zhou [Thu, 28 Jul 2022 02:44:46 +0000 (02:44 +0000)]
Merge branch 'CR_1662_SEC_jiajie.ho' into 'jh7110-5.15.y-devel'
CR_1662_crypto:starfive: Include bug fixes for hash/hmac found by Linux selftest.
See merge request sdk/linux!312
Walker Chen [Thu, 28 Jul 2022 02:07:51 +0000 (10:07 +0800)]
CR_1735_TDM: meet compatible test
1.Meeting compatible testing.
2.Supporting playback or record with 1 channel.
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
Jason Zhou [Thu, 28 Jul 2022 02:00:53 +0000 (02:00 +0000)]
Merge branch 'CR_1725_v4l2_515_changhuang.liang' into 'jh7110-5.15.y-devel'
CR_1725_v4l2: modify mipi sensor data third time run cause error
See merge request sdk/linux!332
changhuang.liang [Wed, 27 Jul 2022 07:53:50 +0000 (15:53 +0800)]
v4l2: modify mipi sensor data third time run cause error
modify mipi sensor data third time run cause error
Signed-off-by: changhuang.liang <changhuang.liang@starfivetech.com>
Jason Zhou [Wed, 27 Jul 2022 02:41:53 +0000 (02:41 +0000)]
Merge branch 'CR_1703_515_pinctrl_des_jianlong' into 'jh7110-5.15.y-devel'
CR_1703 pinctrl: starfive: update config description
See merge request sdk/linux!322
Jason Zhou [Wed, 27 Jul 2022 02:38:39 +0000 (02:38 +0000)]
Merge branch 'CR_1708_TDM_32bit_515_walker.chen' into 'jh7110-5.15.y-devel'
CR_1708_TDM_515:fix 32bit only has 1 channel of data
See merge request sdk/linux!324
changhuang.liang [Tue, 26 Jul 2022 12:56:07 +0000 (20:56 +0800)]
v4l2: fixed imx219 date error at the first line
fixed imx219 date error at the first line
Signed-off-by: changhuang.liang <changhuang.liang@starfivetech.com>
Kevin.xie [Tue, 26 Jul 2022 09:55:39 +0000 (17:55 +0800)]
dts: starfive: Modified vbus enable pin function to be GPO_HIGH
Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
Jianlong Huang [Mon, 25 Jul 2022 08:50:29 +0000 (16:50 +0800)]
pinctrl: starfive: update config description
update config desription and delete vic7100 description
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
keith.zhao [Tue, 26 Jul 2022 03:31:21 +0000 (11:31 +0800)]
riscv:linux:vout:inno hdmi
delete unless function to reduce warning
Signed-off-by: keith <keith.zhao@starfivetech.com>
Walker Chen [Tue, 26 Jul 2022 02:36:17 +0000 (10:36 +0800)]
TDM:fix 32bit only has 1 channel of data
TDM: playback or record with 32bit format, only has 1 channel of data.
This bug has been resolved.
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
keith.zhao [Tue, 26 Jul 2022 02:35:15 +0000 (10:35 +0800)]
riscv:linux:vout:inno hdmi
Solve inno hdmi screen compatibility issue , include 4K display mode
Signed-off-by: keith <keith.zhao@starfivetech.com>
Jason Zhou [Fri, 22 Jul 2022 09:50:39 +0000 (09:50 +0000)]
Merge branch 'CR_1590_GPU_Enable_515_Andy.Hu' into 'jh7110-5.15.y-devel'
CR_1590: defconfig: enable GPU building
See merge request sdk/linux!320
Andy Hu [Fri, 22 Jul 2022 08:36:20 +0000 (16:36 +0800)]
defconfig: enable GPU building
Enable CONFIG_DRM_IMG and CONFIG_DRM_IMG_ROGUE in jh7110 defconfig
Signed-off-by: shanlong.li <shanlong.li@starfivetech.com>
Jason Zhou [Fri, 22 Jul 2022 05:36:36 +0000 (05:36 +0000)]
Merge branch 'CR_1584_pwmdac_11025_compatible_issue_minda' into 'jh7110-5.15.y-devel'
CR_1584 pwmdac:sound: support 11025hz sample rate.
See merge request sdk/linux!275
Jason Zhou [Fri, 22 Jul 2022 01:43:47 +0000 (01:43 +0000)]
Merge branch 'CR_1649_7110_evb_5.15_vout_retbug_shengyang.chen' into 'jh7110-5.15.y-devel'
CR_1649_5.15-evb_vout: fix failure problem of vout while startup
See merge request sdk/linux!299
minda.chen [Wed, 13 Jul 2022 06:04:54 +0000 (14:04 +0800)]
pwmdac:sound: support 11025hz play mode.
1. set the correct clock rate and sample cnt.
2. using aplay 11.025kz wave file can pass.
3. fix issue redmine 1584
Signed-off-by: minda.chen <minda.chen@starfivetech.com>
Jason Zhou [Thu, 21 Jul 2022 10:46:04 +0000 (10:46 +0000)]
Merge branch 'CR_1422_V4L2_515_mason.huo' into 'jh7110-5.15.y-devel'
Cr 1422 v4 l2 515 mason.huo
See merge request sdk/linux!316
Jason Zhou [Thu, 21 Jul 2022 10:43:22 +0000 (10:43 +0000)]
Merge branch 'CR_1667_TDM_change_reset_interface_walker.chen' into 'jh7110-5.15.y-devel'
CR_1667_TDM_change_reset_interface
See merge request sdk/linux!304
Jason Zhou [Thu, 21 Jul 2022 10:41:29 +0000 (10:41 +0000)]
Merge branch 'CR_1541_PDM_Increase_walker.chen' into 'jh7110-5.15.y-devel'
CR_1541_PDM: support more data width and sample rate
See merge request sdk/linux!310
Jason Zhou [Thu, 21 Jul 2022 10:40:44 +0000 (10:40 +0000)]
Merge branch 'CR_1661_Watchdog_api_Xingyu.Wu' into 'jh7110-5.15.y-devel'
CR_1661 watchdog:starfive:Update reset api
See merge request sdk/linux!308
Jason Zhou [Thu, 21 Jul 2022 10:39:37 +0000 (10:39 +0000)]
Merge branch 'CR_1600_v4l2_reset_515_changhuang.liang' into 'jh7110-5.15.y-devel'
CR_1600_v4l2_reset_515_changhuang.liang
See merge request sdk/linux!282
Jason Zhou [Thu, 21 Jul 2022 10:38:00 +0000 (10:38 +0000)]
Merge branch 'CR_1657_clock_tree_api_Xingyu.Wu' into 'jh7110-5.15.y-devel'
CR_1657 clock tree api xingyu.wu
See merge request sdk/linux!305
Jason Zhou [Thu, 21 Jul 2022 10:36:57 +0000 (10:36 +0000)]
Merge branch 'CR_1658_I2S_515_curry.zhang' into 'jh7110-5.15.y-devel'
CR_1658_I2S [Audio: I2S] Updated the reset API
See merge request sdk/linux!301
Jason Zhou [Thu, 21 Jul 2022 10:35:03 +0000 (10:35 +0000)]
Merge branch 'CR_1656_RTC_hal.feng' into 'jh7110-5.15.y-devel'
Cr 1656 rtc hal.feng
See merge request sdk/linux!292
Walker Chen [Wed, 20 Jul 2022 09:53:32 +0000 (17:53 +0800)]
TDM:change reset interface
1.Modify reset interface with devm_reset_control_array_get_exclusive
2.Support more sample rate: 11025, 22050, 32000, 44100, 48000
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
mason.huo [Mon, 27 Jun 2022 08:33:18 +0000 (16:33 +0800)]
media: starfive: Fix v4l2 compliance test issues
To get the v4l2 compliance test passed:
Add some v4l2 operations which are needed.
Improve the ioctl operations of sensor too.
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
mason.huo [Mon, 4 Jul 2022 03:27:37 +0000 (11:27 +0800)]
media: starfive: Add video format debug information
Add some debug log for set/get video format,
so that we can check if the v4l2 driver accepts
or not the format set by user.
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
changhuang.liang [Tue, 19 Jul 2022 02:20:40 +0000 (10:20 +0800)]
v4l2: fixed v4l2 compliance issue
imx219 add set/get frameintervals
Signed-off-by: changhuang.liang <changhuang.liang@starfivetech.com>
jiajie.ho [Thu, 21 Jul 2022 07:25:52 +0000 (15:25 +0800)]
crypto:starfive: Include bug fixes for hash/hmac found by Linux selftest.
SHA/HMAC fixes:
1. Updated SM3 blocksize and digestsize.
2. Fixed non 32bit-aligned key input for HMAC.
3. Removed unnecessary init sequence check from SHA/HMAC.
Signed-off-by: jiajie.ho <jiajie.ho@starfivetech.com>
Walker Chen [Thu, 21 Jul 2022 06:02:22 +0000 (14:02 +0800)]
PDM: support more data width and sample rate
PDM driver: support data width 16, 32 bits, sample rate 8000, 11025,
16000 Hz
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
curry.zhang [Wed, 20 Jul 2022 01:36:38 +0000 (18:36 -0700)]
[Audio: I2S] Updated the reset API
changed the standard reset API
Signed-off-by: curry.zhang <curry.zhang@starfivetech.com>
Jason Zhou [Thu, 21 Jul 2022 05:28:59 +0000 (05:28 +0000)]
Merge branch 'CR_1582_evb_515_DRM_RGB_keith.zhao' into 'jh7110-5.15.y-devel'
riscv:linux:vout:rgb
See merge request sdk/linux!278
Hal Feng [Tue, 19 Jul 2022 13:11:20 +0000 (21:11 +0800)]
rtc: starfive: Change reset api
Use devm_reset_control_array_get_exclusive() to get reset
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Hal Feng [Tue, 19 Jul 2022 13:09:14 +0000 (21:09 +0800)]
riscv: dts: starfive: Modify order of reset in rtc node
For changing reset api used in rtc driver
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
xingyu.wu [Wed, 20 Jul 2022 02:07:06 +0000 (10:07 +0800)]
clk:starfive:Update clk and reset api about vout
Use 'clk_bulk_get' api to replace 'clk_get' and use
'share' replace 'exclusive' about reset.
Signed-off-by: xingyu.wu <xingyu.wu@starfivetech.com>
xingyu.wu [Wed, 20 Jul 2022 02:02:06 +0000 (10:02 +0800)]
clk:starfive:Update clk and reset api about isp
Use 'clk_bulk_get' and 'devm_reset_control_array_get' api
to replace 'clk_get' and 'devm_reset_control_get' api.
Signed-off-by: xingyu.wu <xingyu.wu@starfivetech.com>
changhuang.liang [Thu, 14 Jul 2022 07:48:02 +0000 (15:48 +0800)]
v4l2: modify reset api
modify reset api
Signed-off-by: changhuang.liang <changhuang.liang@starfivetech.com>
Jason Zhou [Wed, 20 Jul 2022 09:28:58 +0000 (09:28 +0000)]
Merge branch 'CR_1176_CLOCK_TREE_PLL_Xingyu.Wu' into 'jh7110-5.15.y-devel'
CR 1176 clock tree pll xingyu.wu
See merge request sdk/linux!280
xingyu.wu [Wed, 20 Jul 2022 05:58:15 +0000 (13:58 +0800)]
watchdog:starfive:Update reset api
Use 'devm_reset_control_array_get_exclusive' api to
get reset controllers.
Signed-off-by: xingyu.wu <xingyu.wu@starfivetech.com>
xingyu.wu [Mon, 18 Jul 2022 02:11:56 +0000 (10:11 +0800)]
clk:starfive:Modify function format about 'jh7110_pll_data_from'
Modify function format about 'jh7110_pll_data_from'
Signed-off-by: xingyu.wu <xingyu.wu@starfivetech.com>
xingyu.wu [Fri, 15 Jul 2022 09:31:36 +0000 (17:31 +0800)]
defconfig:Add CONFIG_CLK_STARFIVE_JH7110_PLL
Add CONFIG_CLK_STARFIVE_JH7110_PLL
Signed-off-by: xingyu.wu <xingyu.wu@starfivetech.com>
xingyu.wu [Fri, 15 Jul 2022 08:51:21 +0000 (16:51 +0800)]
clk:starfive:Set PLL2 frequency when clock tree registering
In the file drivers/clk/starfive/clk-starfive-jh7110-pll.h,
If set PLL2_DEFAULT_FREQ NULL of 0 , then PLL2 frequency is original.
If set PLL2_DEFAULT_FREQ one of 'starfive_pll2_freq_value', then PLL2
frequency will be set the new rate during clock tree registering.
Signed-off-by: xingyu.wu <xingyu.wu@starfivetech.com>
xingyu.wu [Fri, 15 Jul 2022 03:53:25 +0000 (11:53 +0800)]
clk:starfive:Add PLL2 frequency controller
If enable CONFIG_CLK_STARFIVE_JH7110_PLL, also could read or set PLL1 clock's
rate by reading or setting syscon registers.
Signed-off-by: xingyu.wu <xingyu.wu@starfivetech.com>
xingyu.wu [Mon, 11 Jul 2022 08:46:18 +0000 (16:46 +0800)]
clk:starfive:Add PLL0 frequency controller
If enable CONFIG_CLK_STARFIVE_JH7110_PLL, could read or set PLL0 clock's
rate by reading or setting syscon registers.
Signed-off-by: xingyu.wu <xingyu.wu@starfivetech.com>
xingyu.wu [Mon, 4 Jul 2022 03:02:31 +0000 (11:02 +0800)]
clk:starfive:Modify the format
Modify the clocktree files' format
Signed-off-by: xingyu.wu <xingyu.wu@starfivetech.com>
xingyu.wu [Tue, 21 Jun 2022 12:41:11 +0000 (20:41 +0800)]
dt-bindings:clock:Delete external clock definitions
Move external clock definitions to C files that avoid illegal use.
Signed-off-by: xingyu.wu <xingyu.wu@starfivetech.com>
shengyang.chen [Wed, 20 Jul 2022 07:16:04 +0000 (15:16 +0800)]
vout: fix failure problem of vout while startup
fix failure problem of vout while startup
Signed-off-by: shengyang.chen<shengyang.chen@starfivetech.com>
Jason Zhou [Wed, 20 Jul 2022 06:23:30 +0000 (06:23 +0000)]
Merge branch 'CR_1651_7110_evb_5.15_voutrst-1_shengyang.chen' into 'jh7110-5.15.y-devel'
Cr 1651 7110 evb 5.15 voutrst 1 shengyang.chen
See merge request sdk/linux!285
Jason Zhou [Wed, 20 Jul 2022 06:22:11 +0000 (06:22 +0000)]
Merge branch 'CR_1562_SPI_Xingyu.Wu' into 'jh7110-5.15.y-devel'
CR_1562 spi xingyu.wu
See merge request sdk/linux!288
Jason Zhou [Wed, 20 Jul 2022 06:21:25 +0000 (06:21 +0000)]
Merge branch 'CR_1564_I2C_hal.feng' into 'jh7110-5.15.y-devel'
CR 1564 i2c hal.feng
See merge request sdk/linux!290
Jason Zhou [Wed, 20 Jul 2022 06:20:37 +0000 (06:20 +0000)]
Merge branch 'CR_1560_v4l2_changhuang.liang' into 'jh7110-5.15.y-devel'
CR_1560_v4l2_changhuang.liang
See merge request sdk/linux!294