Alex Ashley [Tue, 10 Nov 2015 16:19:34 +0000 (16:19 +0000)]
hlsdemux: correct the calculation of seek range of non-live streams
The seek range calculation for on-demand streams was incorrectly
excluding the last three segments of the stream. This three segment
rule should only be applied to live streams [1].
[1] https://tools.ietf.org/html/draft-pantos-http-live-streaming-17#section-6.3.3
https://bugzilla.gnome.org/show_bug.cgi?id=758386
Paolo Pettinato [Tue, 1 Dec 2015 17:52:03 +0000 (17:52 +0000)]
pcapparse: Forward FLUSH_STOP events downstream too
https://bugzilla.gnome.org/show_bug.cgi?id=758913
Tim-Philipp Müller [Sun, 29 Nov 2015 01:02:15 +0000 (01:02 +0000)]
hlsdemux: fix crash when decryption key can't be downloaded
Happened with
http://sslhls.m6tv.cdn.sfr.net/hls-live/livepkgr/_definst_/m6_hls_aes/m6_hls_aes_856.m3u8
if glib-networking was not installed (since key has https uri).
Tim-Philipp Müller [Mon, 30 Nov 2015 11:05:38 +0000 (11:05 +0000)]
hls: m3u8: remove pointless client_has_main() function
We always have a main list.
Tim-Philipp Müller [Sat, 28 Nov 2015 00:12:04 +0000 (00:12 +0000)]
hls: m3u8: remove unused _get_current_fragment_duration() function
Tim-Philipp Müller [Fri, 27 Nov 2015 19:21:22 +0000 (19:21 +0000)]
hls: m3u8: remove unused m3u8 client update_failed_count field
Tim-Philipp Müller [Sun, 15 Nov 2015 17:31:05 +0000 (17:31 +0000)]
hls: m3u8: remove helper var that's only used during parsing from structure
Just keep that local to the parsing function.
Tim-Philipp Müller [Sun, 1 Nov 2015 13:21:45 +0000 (13:21 +0000)]
hls: rename plugin from fragmented to hls
Sebastian Dröge [Tue, 1 Dec 2015 17:44:36 +0000 (19:44 +0200)]
hlsdemux: Always give timestamps if we're discont and don't mark stream discont if a playlist change was not successful
If the stream is discont, we must provide a timestamp in any case. Elements
like tsdemux are not going to output anything if we give a NONE timestamp
after a discont.
Also marking a stream as discont if a playlist change was not successful would
lead to the above situation, but in that case we are not required at all to
mark the stream discont as we're still at the old playlist.
Tim-Philipp Müller [Tue, 1 Dec 2015 17:06:33 +0000 (17:06 +0000)]
tsmux: fix wrong log message level
ERROR level is debugging left-over.
Hyunjun Ko [Mon, 9 Nov 2015 07:08:30 +0000 (16:08 +0900)]
tests:aggregator: fix tc failure and correct check value
Failure by this commit
2dfa548f3645844082c3db65d96d87255701b3ad, which is
to append hooks instead of prepend.
Because of this change, aggretated_cb is not called and leads to failure.
And correct to check flush stop value instead of flush start value
https://bugzilla.gnome.org/show_bug.cgi?id=757801
Sebastian Dröge [Mon, 30 Nov 2015 17:53:28 +0000 (19:53 +0200)]
d3dvideosink: Don't try to recreate swapchain while the window is minimized
It will fail and cause the sink to crash. Instead wait until the window is
visible again before checking if the swapchain really has to be recreated.
https://bugzilla.gnome.org/show_bug.cgi?id=741608
Luis de Bethencourt [Fri, 27 Nov 2015 18:46:56 +0000 (18:46 +0000)]
opusparse: remove unneeded statement
commit
da5c41930c4083979b1745f4d8848d97fe03d8eb removed the two uses of the
new value of data:
channels = opus_packet_get_nb_channels (data);
bandwidth = opus_packet_get_bandwidth (data);
Since then, data isn't being used between incrementing it by packet_offset
and going out of scope. Removing this uneeded statement.
Tim-Philipp Müller [Fri, 27 Nov 2015 12:44:57 +0000 (12:44 +0000)]
tests: id3mux: add unit test for GST_TAG_PRIVATE_DATA writing
https://bugzilla.gnome.org/show_bug.cgi?id=758728
Ravi Kiran K N [Fri, 27 Nov 2015 06:03:07 +0000 (11:33 +0530)]
id3mux: write private data tag
Handle "PRIV" tag in id3mux. Write owner
identifier and private data and add to the
id3v2 frame.
https://bugzilla.gnome.org/show_bug.cgi?id=758728
Mathias Hasselmann [Thu, 26 Nov 2015 09:15:36 +0000 (10:15 +0100)]
androidmedia: Don't add metadata to locked buffer
The video decoders tried calling gst_buffer_add_*meta() on non-writable
buffer resulting in warnings of this kind:
gstamcvideodec.c:921 (_gl_sync_render_unlocked): WARNING: amcvideodec
Failed to create the transformation meta for the gl_sync 0xabc03848
buffer 0xabb01b40 (0)
https://bugzilla.gnome.org/show_bug.cgi?id=758694
Florin Apostol [Mon, 9 Nov 2015 18:07:30 +0000 (18:07 +0000)]
adaptivedemux: tests: disabled testFragmentDownloadError test
Until we will have support to control the generating thread from
fakeHTTPsrc element, the test testFragmentDownloadError is disabled.
https://bugzilla.gnome.org/show_bug.cgi?id=757776
Florin Apostol [Mon, 9 Nov 2015 14:14:34 +0000 (14:14 +0000)]
adaptivedemux: tests: corrected access to fakeHTTPsrc element
The src element for adaptivedemux is now a bin. Updated the tests to
correctly reach into the bin and get the fakeHTTPsrc element
https://bugzilla.gnome.org/show_bug.cgi?id=757776
Florin Apostol [Mon, 9 Nov 2015 14:13:04 +0000 (14:13 +0000)]
adaptivedemux: tests: made fakeHTTPsrc element MT safe
https://bugzilla.gnome.org/show_bug.cgi?id=757776
Vineeth T M [Mon, 23 Nov 2015 02:32:13 +0000 (11:32 +0900)]
spu-pgs: Fix array memory leak
https://bugzilla.gnome.org/show_bug.cgi?id=758517
Tim-Philipp Müller [Tue, 24 Nov 2015 00:20:36 +0000 (00:20 +0000)]
audiomixer: register function name for debugging just once
Not every time aggregate is called...
Florin Apostol [Tue, 24 Nov 2015 12:42:45 +0000 (12:42 +0000)]
mpdparser: remove gst_mpd_client_check_time_position
https://bugzilla.gnome.org/show_bug.cgi?id=758593
Maroš Ondrášek [Tue, 24 Nov 2015 10:50:51 +0000 (11:50 +0100)]
mssdemux: add depth field to audio caps if available
depth field can be retrieved from "BitsPerSample" or
from "WaveFormatEx" structure, if provided in Manifest
https://bugzilla.gnome.org/show_bug.cgi?id=758586
Florin Apostol [Fri, 20 Nov 2015 16:35:43 +0000 (16:35 +0000)]
mpdparser: tests: added test for fraction of seconds in availabilityStartTime
https://bugzilla.gnome.org/show_bug.cgi?id=758410
Florin Apostol [Fri, 20 Nov 2015 16:36:00 +0000 (16:36 +0000)]
mpdparser: added support for parsing fraction of seconds in dateTime fields
https://bugzilla.gnome.org/show_bug.cgi?id=758410
George Kiagiadakis [Sun, 22 Nov 2015 12:11:48 +0000 (13:11 +0100)]
tests: put the waylandsink example window.ui file in EXTRA_DIST
George Kiagiadakis [Sun, 22 Nov 2015 12:08:35 +0000 (13:08 +0100)]
tests: fix linking waylandsink example with the gstwayland library
First, use top_builddir, otherwise it fails in out-of-source builds.
Second, link to the libtool archive directly to let make understand
the dependency.
Thiago Santos [Fri, 20 Nov 2015 23:59:16 +0000 (20:59 -0300)]
dashdemux: always set presentationTimeOffset
Set it for all types of segment lists (templates / lists / base)
and not only for templates.
https://bugzilla.gnome.org/show_bug.cgi?id=751529
Sebastian Dröge [Fri, 20 Nov 2015 15:50:30 +0000 (17:50 +0200)]
mxfmux: Error out if we get a timeout during live mixing
We can't handle that but need complete streams without gaps.
Sebastian Dröge [Fri, 20 Nov 2015 15:46:53 +0000 (17:46 +0200)]
mxfmpeg: Use the correct sound essence compression UL for MP3
There's one for MPEG 1 Layer 1 and one for Layer 2 and 3. We previously
had the second for Layer 1 and 2 and nothing for Layer 3, which was wrong.
Sebastian Dröge [Fri, 20 Nov 2015 15:34:22 +0000 (17:34 +0200)]
mxfmpeg: Set the essence container UL byte 13 to 0x10 for h264
0x04 signifies a MPEG elementary stream but according to RP2008, 0x10 should
be used for a h264 byte-stream. This also fixes compatibility of our files
with ffmpeg.
Roman Nowicki [Fri, 20 Nov 2015 00:18:43 +0000 (11:18 +1100)]
qml: reuse existing GstQSGTexture
Fixes a memory leak leaking the texture objects.
https://bugzilla.gnome.org/show_bug.cgi?id=758286
Matthew Waters [Fri, 20 Nov 2015 00:08:37 +0000 (11:08 +1100)]
qml: activate the wrapped context when binding
Mitigates the following critical
gst_gl_context_thread_add: assertion 'context->priv->active_thread == g_thread_self ()' failed
Roman Nowicki [Thu, 19 Nov 2015 10:55:19 +0000 (11:55 +0100)]
qml: proper initialization if scene is already initialized
The scene graph can be initialized when the we receive window handle change
notification and so we will not receive a scenegraph initialization
notification. Initialize ourself in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=758337
Jimmy Ohn [Wed, 29 Jul 2015 13:31:30 +0000 (22:31 +0900)]
dashdemux: Add binary search for stream_sidx_seek
Add binary search to optimize in stream_sidx_seek.
https://bugzilla.gnome.org/show_bug.cgi?id=749653
Florin Apostol [Thu, 19 Nov 2015 15:59:56 +0000 (15:59 +0000)]
mpdparser: remove unused functions gst_mpdparser_get_chunk_by_index and gst_mpdparser_find_segment_by_index
https://bugzilla.gnome.org/show_bug.cgi?id=758233
Luis de Bethencourt [Thu, 19 Nov 2015 17:24:53 +0000 (17:24 +0000)]
docs: update gst-launch-0.10 lines
Update references to gst-launch-0.10 to gst-launch-1.0
Matthew Waters [Wed, 18 Nov 2015 23:32:03 +0000 (10:32 +1100)]
amcvideodec: move release_output_buffer into the sync meta
Some devices only ever keep one buffer available in the GL queue resulting in
multiple calls to release_output_buffer only causing one frame to be rendered.
If there is a queue after amcvideodec (even playsink's small one), then
multiple buffers are pushed but only a small fraction of them are actually
rendered on time. The rest will either render some number of frames ahead of
where they are meant to be or timeout waiting for a frame that's already been
rendered.
Solved by moving the release_output_buffer into the sync_meta the is pushed
downstream. When downstream renders, the custom sync implementation attempts
to release the current buffer (if not already released) and render. Once the
frame has been rendered to the screen, the next frame is released and is
hopefully available by the time the next frame is to be rendered.
This fixes a perceived frame jitter in the output.
Reynaldo H. Verdejo Pinochet [Tue, 17 Nov 2015 23:23:17 +0000 (15:23 -0800)]
Remove unnecessary NULL checks before g_free()
g_free() is NULL-safe
Sebastian Dröge [Wed, 11 Nov 2015 15:11:14 +0000 (16:11 +0100)]
mpdparser: Also allow '/' in RepresentationID
Used by http://www.bok.net/dash/tears_of_steel/cleartext/stream.mpd
https://bugzilla.gnome.org/show_bug.cgi?id=757903
George Kiagiadakis [Mon, 26 Oct 2015 15:24:40 +0000 (16:24 +0100)]
tests/examples: add a waylandsink example
https://bugzilla.gnome.org/show_bug.cgi?id=748322
George Kiagiadakis [Wed, 18 Nov 2015 11:56:06 +0000 (12:56 +0100)]
waylandsink: call gst_video_sink_center_rect with a destination rectangle that starts from (0,0)
The intention of this code is to find the center rectangle relative
to (0,0), since subsurface coordinates are relative to the parent
surface.
The old code used to work but was wrong and broken by
http://cgit.freedesktop.org/gstreamer/gst-plugins-base/commit/gst-libs/gst/video/gstvideosink.c?id=
ff57f6913456ec1991e55517cf1f239e80eeddef
Florin Apostol [Mon, 16 Nov 2015 17:25:34 +0000 (17:25 +0000)]
dashdemux: fixed illegal memory access in gst_mpd_client_get_last_fragment_timestamp_end
https://bugzilla.gnome.org/show_bug.cgi?id=758188
Florin Apostol [Mon, 16 Nov 2015 17:25:21 +0000 (17:25 +0000)]
mpdparser: tests: added test for gst_mpd_client_get_last_fragment_timestamp_end
The timestamp for last fragment is incorrectly retrieved if segment templates
are used.
https://bugzilla.gnome.org/show_bug.cgi?id=758188
Sebastian Dröge [Tue, 17 Nov 2015 14:21:44 +0000 (16:21 +0200)]
amcvideodec: Don't require a non-zero buffer size when doing decoding to a surface
At least on some devices/Android versions the buffer size will always be zero
in these cases.
https://bugzilla.gnome.org/show_bug.cgi?id=758228
Sebastian Dröge [Tue, 17 Nov 2015 15:17:50 +0000 (17:17 +0200)]
glimagesink: Remove unused variable
gstglimagesink.c: In function 'gst_glimage_sink_on_draw':
gstglimagesink.c:1959:18: error: unused variable 'sync_meta' [-Werror=unused-variable]
GstGLSyncMeta *sync_meta = NULL;
^
Sebastian Dröge [Tue, 17 Nov 2015 15:09:51 +0000 (17:09 +0200)]
glviewconvert: String literals are const
gstglviewconvert.c: In function '_mangle_extensions':
gstglviewconvert.c:1511:13: error: assignment discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
ext_str = "#extension GL_OES_EGL_image_external : require\n";
^
Sebastian Dröge [Tue, 17 Nov 2015 15:08:14 +0000 (17:08 +0200)]
glsyncmeta: Actually return the newly created meta from gst_buffer_add_gl_sync_meta()
gstglsyncmeta.c -fPIC -DPIC -o .libs/libgstgl_1.0_la-gstglsyncmeta.o
gstglsyncmeta.c: In function 'gst_buffer_add_gl_sync_meta':
gstglsyncmeta.c:131:1: error: control reaches end of non-void function [-Werror=return-type]
}
^
Sebastian Dröge [Tue, 17 Nov 2015 14:21:10 +0000 (16:21 +0200)]
amcvideodec: Fix indentation
Alessandro Decina [Tue, 17 Nov 2015 05:08:17 +0000 (16:08 +1100)]
applemedia: vtdec: fix negotiation more
Year 12: I still don't understand how negotiation works.
Apparently gst_pad_query_caps doesn't do what I thought it did. To get the
actual caps that can flow through vtdec:src we must call gst_pad_peer_query_caps
with the template caps as filter.
Fixes negotiation with stuff that doesn't understand GLMemory (hello videoscale).
Alessandro Decina [Tue, 17 Nov 2015 05:14:11 +0000 (16:14 +1100)]
applemedia: vtdec: minor texture cache fixes
Small fix on how the texture cache is cleaned up / setup in case of renegotiation
Alessandro Decina [Tue, 17 Nov 2015 05:13:00 +0000 (16:13 +1100)]
applemedia: corevideotexturecache: stop configuring cache->convert over and over
Matthew Waters [Mon, 16 Nov 2015 04:46:41 +0000 (15:46 +1100)]
glimagesink: wait on the correct sync meta when rendering
Matthew Waters [Tue, 3 Nov 2015 02:19:41 +0000 (13:19 +1100)]
amcviddec: output external-oes textures
This provides a performance and power usage improvement by removing
the texture copy from an OES texture to 2D texture.
The flow is as follows
1. Generate the output buffer with the required sync meta with the incrementing
push counter and OES GL memory
1.1 release_output_buffer (buf, render=true) and push downstream
2. Downstream waits for on the sync meta (timed wait) or drops the frame (no wait)
2.1 Timed wait for the frame number to reach the number of frame callbacks fired
2.2 Unconditionally update the image when the wait completes (success or fail).
Sets the affine transformation matrix meta on the buffer.
3. Downstream renders as usual.
At *some* point through this the on_frame_callback may or may not fire. If it
does fire, we can finish waiting early and render. Otherwise we have to
wait for a timeout to occur which may cause more buffers to be pused into the
internal GL queue which siginificantly decreases the chances of the
on_frame_callback to fire again. This is because the frame callback only occurs
when the internal GL queue changes state from empty to non-empty.
Because there is no way to reliably correlate between the number of buffers
pushed and the number of frame callbacks received, there are a number of
workarounds in place.
1. We self-increment the ready counter when it falls behind the push counter
2. Time based waits as the frame callback may not be fired for a certain frame.
3. It is assumed that the device can render at speed or performs some QoS of
the interal GL queue (which may not match the GStreamer QoS).
It holds that we call SurfaceTexture::updateTexImage for each buffer pushed
downstream however there's no guarentee that updateTexImage will result in
the exact next frame (it could skip or duplicate) so synchronization is not
guaranteed to be accurate although it seems to be close enough to be unable
to discern visually. This has not changed from before this patch. The current
requirement for synchronization is that updateTexImage is called at the point in
time when the buffers is to be rendered.
https://bugzilla.gnome.org/show_bug.cgi?id=757285
Matthew Waters [Mon, 2 Nov 2015 06:57:29 +0000 (17:57 +1100)]
glsyncmeta: add vfuncs for all operations
there could be other ways/requirements for synchronising two GPU command
streams (whether GL or platform specific).
e.g. glfencesync/eglwaitnative/cond/etc
Matthew Waters [Tue, 10 Nov 2015 04:37:05 +0000 (15:37 +1100)]
glimagesink: add support for rendering external-oes textures
https://bugzilla.gnome.org/show_bug.cgi?id=757285
Matthew Waters [Tue, 10 Nov 2015 03:54:02 +0000 (14:54 +1100)]
glviewconvert: add support rectangle/external-oes textures
https://bugzilla.gnome.org/show_bug.cgi?id=757285
Alessandro Decina [Tue, 17 Nov 2015 04:18:28 +0000 (15:18 +1100)]
applemedia: vtdec: fix setting internal SKIP / DROP flags
Vineeth TM [Tue, 17 Nov 2015 00:08:52 +0000 (09:08 +0900)]
glimagesink: Fix structure memory leak
https://bugzilla.gnome.org/show_bug.cgi?id=758205
Olivier Crête [Tue, 17 Nov 2015 02:52:07 +0000 (21:52 -0500)]
autoconvert: Add support for bufferlists
Alessandro Decina [Tue, 17 Nov 2015 00:21:27 +0000 (11:21 +1100)]
applemedia: vtdec: improve negotiation
Rework negotiation implementing GstVideoDecoder::negotiate. Make it possible to
switch texture sharing on and off at runtime. Useful to (eventually) turn
texture sharing on in pipelines where glimagesink is linked only after
decoding has already started (for example OWR).
Alessandro Decina [Tue, 17 Nov 2015 00:19:57 +0000 (11:19 +1100)]
applemedia: vtdec: improve handing of decode errors/frame drops
Improve decode error handling by avoiding calling into GstVideoDecoder from the
VT decode callback. This removes contention on the GST_VIDEO_DECODER_STREAM_LOCK
which used to make the decode callback slow enough for VT to start dropping lots
of frames once the first frame was dropped.
Alessandro Decina [Tue, 17 Nov 2015 00:22:15 +0000 (11:22 +1100)]
applemedia: vtdec: fix uninitialized variable warning
Tim-Philipp Müller [Sat, 14 Nov 2015 20:21:17 +0000 (20:21 +0000)]
adaptivedemux: remove now-defunct "num-lookback-fragments" property
This no longer does anything, and it was marked as CONSTRUCT_ONLY
which means someone would really have to go out of their way to
be able to set this, which would only be done in very custom
scenarios, if ever, and those will likely target a specific
version of GStreamer then, so probably not much point keeping
it deprecated for a while before removing it.
Olivier Crête [Fri, 13 Nov 2015 22:14:14 +0000 (17:14 -0500)]
autoconvert: Always give a valid reply to internal caps queries
Caps queries can always have a valid reply, either the filter or ANY.
If the caps are ANY, then accept-caps always returns TRUE.
Nicolas Huet [Thu, 12 Nov 2015 15:35:12 +0000 (16:35 +0100)]
mpegtsdemux: fix section_data leak
If packet->payload_unit_start_indicator is true and pointer 0, there is no
discontinuity check. Therefore there could be a previous section not complete
that need to be cleared.
https://bugzilla.gnome.org/show_bug.cgi?id=758010
Vineeth TM [Fri, 13 Nov 2015 01:41:58 +0000 (10:41 +0900)]
glsl: fix possible string overrun in gst_glsl_version_profile_from_string
given a NULL-terminated string, s.
s[i] = '\0';
i++;
does not guarentee that s[i] is NULL terminated and thus string operations
could read off the end of the array.
https://bugzilla.gnome.org/show_bug.cgi?id=758039
Matthew Waters [Fri, 13 Nov 2015 05:50:22 +0000 (16:50 +1100)]
glshader: don't read invalid list pointers (use after free)
gst_gl_shader_detach_unlocked already removes the list entry so attempting to
use the element to iterate to the next stage could read invalid data.
Based on patch by Vineeth TM <vineeth.tm@samsung.com>
https://bugzilla.gnome.org/show_bug.cgi?id=758039
Vineeth TM [Fri, 13 Nov 2015 01:44:26 +0000 (10:44 +0900)]
tests:glsl: version_profile_s string leak
https://bugzilla.gnome.org/show_bug.cgi?id=758039
Vineeth TM [Fri, 13 Nov 2015 01:56:10 +0000 (10:56 +0900)]
glsl: free str while returning error
https://bugzilla.gnome.org/show_bug.cgi?id=758039
Vineeth TM [Fri, 13 Nov 2015 02:04:34 +0000 (11:04 +0900)]
tests:glupload: fix caps memory leak
https://bugzilla.gnome.org/show_bug.cgi?id=758039
Luis de Bethencourt [Thu, 12 Nov 2015 12:21:54 +0000 (12:21 +0000)]
opusenc: avoid potential overflow expression
The result of the two expressions will be promoted to guint64 anyway,
perform all the arithmetic in 64 bits to avoid potential overflows.
CID 1338690, CID 1338691
Luis de Bethencourt [Thu, 12 Nov 2015 12:00:07 +0000 (12:00 +0000)]
tsdemux: remove memory leak
The values of channel_mapping are copied by gst_codec_utils_opus_create_caps ()
but it doesn't free or take ownership of the g_new0 allocated memory. This
needs to be freed before going out of scope.
CID 1338692
Luis de Bethencourt [Thu, 12 Nov 2015 11:42:36 +0000 (11:42 +0000)]
mpegtsmux: remove unnecessary buffer check
buf surely isn't NULL inside the block conditional to a buffer size bigger
than (G_MAXUINT16 - 3). Plus gst_buffer_unref() checks if the buffer is
NULL and does nothing if it is.
CID 1338693
Luis de Bethencourt [Thu, 12 Nov 2015 11:23:31 +0000 (11:23 +0000)]
opusparse: initialize sample rate to a default
sample_rate might be used uninitialized if !sink_caps is TRUE. Initialize
it to the default used in gst_codec_utils_opus_parse_caps () when there is
no rate defined in the caps.
CID 1338695
Vineeth TM [Thu, 12 Nov 2015 07:36:03 +0000 (16:36 +0900)]
glslstage: Fix vertex_sources memory leak
vertex_sources is being allocated but not freed resulting in leak
https://bugzilla.gnome.org/show_bug.cgi?id=757974
Vineeth TM [Thu, 12 Nov 2015 07:26:00 +0000 (16:26 +0900)]
glcolorconvert: remove unnecessary free
version_str is already being freed. So no need to call again
https://bugzilla.gnome.org/show_bug.cgi?id=757974
Vineeth TM [Thu, 12 Nov 2015 07:18:35 +0000 (16:18 +0900)]
glcolorconvert: Fix string leak
String got using gst_glsl_version_profile_to_string, is allocated
memory and should be freed
https://bugzilla.gnome.org/show_bug.cgi?id=757974
Vineeth TM [Thu, 12 Nov 2015 07:02:45 +0000 (16:02 +0900)]
glcolorconvert: Fix frag_prog and frag_body memory leak
https://bugzilla.gnome.org/show_bug.cgi?id=757974
Florin Apostol [Wed, 11 Nov 2015 16:51:23 +0000 (16:51 +0000)]
adaptivedemux: fixed handling errors emitted by uri handler
https://bugzilla.gnome.org/show_bug.cgi?id=757947
Nicolas Huet [Tue, 10 Nov 2015 15:32:37 +0000 (16:32 +0100)]
tsdemux: fix pending buffers leak when flushing
https://bugzilla.gnome.org/show_bug.cgi?id=757895
Etienne Peron [Wed, 10 Jun 2015 12:18:00 +0000 (14:18 +0200)]
tsdemux: Fix pad leak when the pad is never exposed
If tsdemux never receives data for a stream, the corresponding pad will never
be added and stream->active will remain FALSE. When the stream is removed, the
pad will not be unreffed and will be leaked.
https://bugzilla.gnome.org/show_bug.cgi?id=757873
Sreerenj Balachandran [Mon, 9 Nov 2015 15:45:29 +0000 (17:45 +0200)]
ivfparse: Fix the wrong width & height parsing of vp9 bitstream
The current implementation for detecting the resolution changes
on key frames is based on vp8 bitstream alignment. Avoid this
width and height parsing for vp9 bitstream, which requires proper
frame header parsing inorder to detect the resolution change (Fixme).
https://bugzilla.gnome.org/show_bug.cgi?id=757825
Heinrich Fink [Wed, 11 Nov 2015 10:40:52 +0000 (11:40 +0100)]
vtenc: Set profile_level to NULL after release
Otherwise, gst_vtenc_negotiate_profile_and_level will double-release as
it checks for profile_level != NULL. This caused crashes when the
vtenc instance is stopped and then restarted.
https://bugzilla.gnome.org/show_bug.cgi?id=757935
Matthew Waters [Wed, 11 Nov 2015 12:39:35 +0000 (23:39 +1100)]
glcolorconvert: mangle gl_FragColor for GL3
Some drivers don't provide the compatibility definition and we need to provide
our own 'out vec4' variable to put the results of the fragment shader into.
https://bugzilla.gnome.org/show_bug.cgi?id=757938
Vineeth TM [Wed, 11 Nov 2015 07:06:25 +0000 (16:06 +0900)]
tests:glcolorconvert: Fix caps memory leak
Output caps being got from video info is not getting freed
https://bugzilla.gnome.org/show_bug.cgi?id=757929
Matthew Waters [Tue, 10 Nov 2015 06:58:58 +0000 (17:58 +1100)]
tsdemux: provide our own definition of log2()
The log2 function/macro doesn't exist when targetting android API < 18 (or MSVC
< 2013) whereas our current baseline is API 9.
Matthew Waters [Tue, 10 Nov 2015 02:52:30 +0000 (13:52 +1100)]
glviewconvert: remove set_format
We need the caps to be able to
1. check the caps features
2. get the requested texture-target on input/output
Matthew Waters [Tue, 10 Nov 2015 23:31:07 +0000 (10:31 +1100)]
glimagesink: fix a memory leak if the view conversion fails
Matthew Waters [Wed, 11 Nov 2015 02:37:59 +0000 (13:37 +1100)]
glimagesink: balance the creation/destruction of the overlay compositor
Fixes some leaks/possible segfault on when failing to create the compositor.
Matthew Waters [Wed, 11 Nov 2015 01:23:30 +0000 (12:23 +1100)]
glshader: properly unref the stages on failure
When failing in the varargs functions, all the stage objects not handled need to
be unreffed to prevent a leak.
Matthew Waters [Wed, 11 Nov 2015 00:29:35 +0000 (11:29 +1100)]
glslstage: properly return an error when we could not create the shader stage
While it was erroring out correctly later, there were GLib warnings about
setting a GError over the top of another GError.
Matthew Waters [Tue, 10 Nov 2015 14:05:20 +0000 (01:05 +1100)]
glshaderstrings: fixup the external-oes fragment shader
The wrong sampler type was used
s/sampler2DExternalOES/samplerExternalOES/
Matthew Waters [Tue, 10 Nov 2015 12:41:24 +0000 (23:41 +1100)]
glcolorconvert: try to keep the same texture-target if possible
Fixes issues attempting to passthrough external-oes textures
Matthew Waters [Tue, 10 Nov 2015 11:41:57 +0000 (22:41 +1100)]
glcolorconvert: fix rendering rectangular textures with GL3
Rectangular textures are unavailable in unextended
GLES2 #version 100 shaders.
Fixes
texture-target=rectangle ! glcolorconvert ! texture-target=2D
There's a couple of differences between GL3 and GLES2/GL
- varying -> in or out depending on the stage (vertex/fragment)
- attribute -> in
- filtered texture access is a single function, texture()
Matthew Waters [Tue, 10 Nov 2015 09:20:29 +0000 (20:20 +1100)]
glcolorconvert: properly use the other texture-target on fixation
Matthew Waters [Tue, 10 Nov 2015 09:15:56 +0000 (20:15 +1100)]
glslstage: add debug as to why _set_strings() failed
Matthew Waters [Tue, 10 Nov 2015 09:13:53 +0000 (20:13 +1100)]
glsl: fix check for glsl version against GL context inversion
Any GLSL version that was less than the provided GL version would fail
Vineeth TM [Tue, 10 Nov 2015 01:02:38 +0000 (10:02 +0900)]
adaptivedemux: Fix pad memory leak.
The static pads got from queue and uri_handler are not being freed
resulting in memory leaks.
https://bugzilla.gnome.org/show_bug.cgi?id=757859
Matthew Waters [Tue, 10 Nov 2015 02:13:50 +0000 (13:13 +1100)]
gl: forward declare some enums
Specifically the GstGLTextureTarget enum