iio: light: opt3001: Add mod_devicetable.h and drop use of of_match_ptr

Enables probing via ACPI PRP0001 but mostly about removing examples
that might be copied to new drivers.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>

iio: light: gp2ap020a00f: Swap of.h for mod_devicetable.h + drop of_match_ptr

Also drops ifdef protections for CONFIG_OF.

Enables probing via ACPI PRP0001 and removes an example that might be
cut and paste into new drivers.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>

iio: light: cm3232: Add mod_devicetable.h include and drop of_match_ptr

Enables ACPI probing via PRP0001 and removes an example that might
be cut and paste to a new driver.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>

iio: light: cm32181: Add mod_devicetable.h and remove of_match_ptr

Enables probing via the ACPI PRP0001 route but more is mosty about
removing examples of this that might get copied into new drivers.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>

iio: light: bh1780: use mod_devicetable.h and drop of_match_ptr macro

Whilst this enables ACPI binding or the device via PRP0001 the
primary aim is to remove potential for these two things to be
cut and paste into new drivers.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>

iio: accel: kxsd9-i2c: Use mod_devicetable.h and drop of_match_ptr macro

Enables ACPI DSDT to probe via PRP0001 and the compatible property. Also
removes the ifdef protections for CONFIG_OF.

Signed-off-by: Nishant Malpani <nish.malpani25@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: dmard06: Use mod_devicetable.h and drop of_match_ptr macro

Enables ACPI DSDT to probe via PRP0001 and the compatible property.

Signed-off-by: Nishant Malpani <nish.malpani25@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: chemical: atlas-sensor: add RTD-SM module support

Atlas Scientific RTD-SM OEM sensor reads temperature using
resistance temperature detector technology.

Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: chemical: add Atlas Scientific RTD-SM sensor docs

Cc: devicetree@vger.kernel.org
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: vt6656: Use fls instead of for loop in vnt_update_top_rates

Replace the for loops of the vnt_update_top_rates function by the fls
function.

The purpose of the two for loops is to find the most significant bit set
in a range of bits. So, they can be replace by the fls function (find
last set) with a previous mask to define the range.

This way avoid the iteration over unnecessary for loops.

The header "linux/bits.h" can be remove as it is included in the header
"linux/bitops.h".

Signed-off-by: Oscar Carter <oscar.carter@gmx.com>
Link: https://lore.kernel.org/r/20200420155246.4925-1-oscar.carter@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Refactor the vnt_ofdm_min_rate function

Replace the for loop by a ternary operator whose condition is an AND
bitmask against the priv->basic_rates variable.

The purpose of the for loop was to check if any of bits from RATE_54M to
RATE_6M was set, but it's not necessary to check every individual bit.
The same result can be achieved using only one single mask which
comprises all the commented bits.

This way avoid the iteration over an unnecessary for loop.

Also change the return type to bool because it's the type that this
function returns.

Signed-off-by: Oscar Carter <oscar.carter@gmx.com>
Link: https://lore.kernel.org/r/20200418134553.6415-1-oscar.carter@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gasket: Fix mapping refcnt leak when register/store fails

gasket_sysfs_register_store() invokes get_mapping(), which returns a
reference of the specified gasket_sysfs_mapping object to "mapping" with
increased refcnt.

When gasket_sysfs_register_store() returns, local variable "mapping"
becomes invalid, so the refcount should be decreased to keep refcount
balanced.

The reference counting issue happens in one exception handling path of
gasket_sysfs_register_store(). When gasket_dev is NULL, the function
forgets to decrease the refcnt increased by get_mapping(), causing a
refcnt leak.

Fix this issue by calling put_mapping() when gasket_dev is NULL.

Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Link: https://lore.kernel.org/r/1587618941-13718-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gasket: Fix mapping refcnt leak when put attribute fails

gasket_sysfs_put_attr() invokes get_mapping(), which returns a reference
of the specified gasket_sysfs_mapping object to "mapping" with increased
refcnt.

When gasket_sysfs_put_attr() returns, local variable "mapping" becomes
invalid, so the refcount should be decreased to keep refcount balanced.

The reference counting issue happens in one path of
gasket_sysfs_put_attr(). When mapping attribute is unknown, the function
forgets to decrease the refcnt increased by get_mapping(), causing a
refcnt leak.

Fix this issue by calling put_mapping() when put attribute fails due to
unknown attribute.

Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Link: https://lore.kernel.org/r/1587618895-13660-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: mt7621-pinctrl: Use correct pointer type argument for sizeof

Fix the following coccicheck warning:

drivers/staging/mt7621-pinctrl/pinctrl-rt2880.c:223:14-36: WARNING: Use
correct pointer type argument for sizeof

Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200420133416.3087-1-yanaijie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: qlge: replace deprecated apis pci_dma_*

Replace legacy/depreacted pci_dma_* functions to new dma_* functions.
Also replace PCI_DMA_* macro to DMA* macro.

Signed-off-by: realwakka <realwakka@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20200420154009.21161-1-realwakka@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: qlge: cleanup indent in qlge_main.c

Cleanup indentation style in qlge_main.c.
Fix 2 warnings found by checkpatch.pl.

Signed-off-by: Mathieu Dolmen <mathieu.dolmen@gmail.com>
Link: https://lore.kernel.org/r/20200419125712.27506-1-mathieu.dolmen@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Move vnt_get_frame_time and vnt_get_phy_field to rxtx

These functions are only used by rxtx so move them and their arrays
used with them abbreviating the function description.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/2a4fd665-2fe1-f1ad-1e9a-1b01f698ea79@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: call vnt_update_pre_ed_threshold from vnt_config.

vnt_update_pre_ed_threshold needs to be updated more often so
call from vnt_config where it updated on any of config changes.

It must have maximum sensitivity when the device is off channel
or idle.

Remove all the other calls in scanning and bss.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/1b00c112-347c-b0bb-61ed-a874ee448ff8@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Move firmware functions into main_usb.

The firmware function are not that complicated so
move them into main_usb as static functions in callers
visibility

Firmware definitions moved to device.h and MODULE_FIRMWARE
move to below module_usb_driver.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/7b384871-826b-9365-e3ed-5717ecefd31c@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8723bs: rtw_wlan_util: Add size check of SSID IE

Add size check of SSID information element in incoming 802.11
frames, to prevent memcpy() of IE in array bssid->Ssid.Ssid, with
size more than 32 bytes.

Signed-off-by: Denis Straghkov <d.straghkov@ispras.ru>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200421212525.24962-1-d.straghkov@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: remove unused variable 'pregistrypriv'

drivers/staging/rtl8723bs/hal/sdio_halinit.c: In function HalRxAggr8723BSdio:
drivers/staging/rtl8723bs/hal/sdio_halinit.c:547:24: warning: variable pregistrypriv set but not used [-Wunused-but-set-variable]

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200421024145.43576-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: remove defined but not used 'dB_Invert_Table'

Fix the following gcc warning:

drivers/staging/rtl8723bs/hal/odm.c:10:18: warning: ‘dB_Invert_Table’
defined but not used [-Wunused-const-variable=]
 static const u16 dB_Invert_Table[8][12] = {
                  ^~~~~~~~~~~~~~~

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200417073439.41888-1-yanaijie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: remove some variables in hal_btcoex.c

Fix the following gcc warning:

drivers/staging/rtl8723bs/hal/hal_btcoex.c:45:26: warning: ‘ioStaString’
defined but not used [-Wunused-const-variable=]
 static const char *const ioStaString[] = {
                          ^~~~~~~~~~~
drivers/staging/rtl8723bs/hal/hal_btcoex.c:38:26: warning:
‘h2cStaString’ defined but not used [-Wunused-const-variable=]
 static const char *const h2cStaString[] = {
                          ^~~~~~~~~~~~
drivers/staging/rtl8723bs/hal/hal_btcoex.c:33:26: warning:
‘BtLinkRoleString’ defined but not used [-Wunused-const-variable=]
 static const char *const BtLinkRoleString[] = {
                          ^~~~~~~~~~~~~~~~
drivers/staging/rtl8723bs/hal/hal_btcoex.c:23:26: warning:
‘BtSpecString’ defined but not used [-Wunused-const-variable=]
 static const char *const BtSpecString[] = {
                          ^~~~~~~~~~~~
drivers/staging/rtl8723bs/hal/hal_btcoex.c:15:26: warning:
‘BtProfileString’ defined but not used [-Wunused-const-variable=]
 static const char *const BtProfileString[] = {
                          ^~~~~~~~~~~~~~~

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200417073310.40893-1-yanaijie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: drop unused attribute 'join_complete_status'

The field join_complete_status is never read. Drop it.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200420160311.57323-17-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: drop unused enum wfx_state

In former code, the field wvif->state was more or less redundant with
vif->type. With the lasts change it has become unused. It is now time to
drop it.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200420160311.57323-16-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: simplify wfx_remove_interface()

In wfx_remove_interface(), the current code differentiate AP and Station
cases. However, it is not necessary. In all cases, the only important
thing is the call to hif_reset(). We can use the same code to support
all cases.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200420160311.57323-15-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: drop useless checks in wfx_do_unjoin()

The callers of wfx_do_unjoin() already take care of vif state.
Therefore, it is not necessary to take care of the status of the
interface.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200420160311.57323-14-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: drop protection for asynchronous join during scan

In former code (before the inclusion of the driver in mainline kernel),
hif_join() could run asynchronously. When a join request was in
progress, it was forbidden to launch hif_scan().

Now, hif_join() is always run synchronously. There is no more reasons to
keep a protection against this case.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200420160311.57323-13-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: keys are kept during whole firmware life

Keys sent to the firmware are never reset. So, it is not necessary to
re-upload them after hif_reset(). Thus, it is no more necessary to keep
a copy of the keys in struct wfx_dev.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200420160311.57323-12-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: introduce wfx_set_default_unicast_key()

Currently code handle WEP keys manually. It is far easier to use
the set_default_unicast_key() callback provided by mac80211.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200420160311.57323-11-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: drop useless update of field basic_rate_set

Basic Rates are already set by hif_join(). hif_join() is also able to
manage possible changes after association.

Firmware also allows to change the Basic Rates with
hif_set_association_mode() but it does not bring anything in our case.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200420160311.57323-10-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: simplify hif_set_bss_params()

The structure hif_req_set_bss_params come from hardware API. It is not
intended to be manipulated in upper layers of the driver.

In add, current code for hif_req_set_bss_params() is too dumb. It should
pack data with hardware representation instead of leaving all work to
the caller.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200420160311.57323-9-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: field operational_rate_set is ignored by firmware

The field bss_params.operational_rate_set is ignore by the firmware. It
is not necessary to send it. This change greatly simplify
wfx_join_finalize(). It is no more necessary to get sta and it allow to
save a RCU.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200420160311.57323-8-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: dual CTS is never necessary

Dual CTS is only necessary when sending/receiving STBC data. However,
the chip does not support STBC, so it is never necessary to enable
double CTS.

We can simplify the code.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200420160311.57323-7-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: also fix network parameters for IBSS networks

Current code skip some configuration during joining an IBSS network.
Indeed, it seems that this configuration is not used in IBSS. However,
it would be harmless to set them. In add, we would prefer to keep
association processes for ad-hoc and managed networks the closest as
possible. It also ensures the values of internal parameters of the
firmware.

Therefore, apply them unconditionally.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200420160311.57323-6-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: handle firmware events synchronously

Currently, events from firmware are handled in a work queue with a
complex event queue mechanism. It is probably overkill since there is
only two events to handle: bss_loss and CQM events. Handling these
events synchronously is sufficient.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200420160311.57323-5-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: drop useless attribute 'bss_params'

Since wfx_bss_params_work() does not exist anymore, there is no more
reason to keep a copy of bss_params in struct wfx_dev. A local instance
in wfx_join_finalize() is sufficient.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200420160311.57323-4-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: use ieee80211_beacon_loss() provided by mac80211

The firmware is able to filter beacons and send a notification if one or
multiple beacons are not received. Note that it send this notification
only once. Only if it receive beacons gain, it send a new notification.

Currently, the driver handle the connection loss itself (see
wfx_cqm_bssloss_sm()). It send null frames and watch the answers.

This patch fixes all this mess:
  - settle firmware to send a notification on the first beacon loss
  - call ieee80211_beacon_loss() and let mac80211 handle all the process
  - since we do have notification for each beacon loss, add a period
    task that call ieee80211_beacon_loss() until we receive "REGAIN"
    notification.

Thus, we can drop the ugly wfx_cqm_bssloss_sm() and
wfx_bss_params_work().

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200420160311.57323-3-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: simplify the check if the the device is associated

Firmware dislikes the driver enables PS when it is not yet associated.
The current check for that condition is more complex than necessary.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200420160311.57323-2-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-5.8a' of git://git./linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new IIO device support, features and cleanup for the 5.8 cycle

Usual mix of new drivers, new support in old drivers and lots of minor
cleanup. Yaml conversions also continue to trickle in (plenty more to go!)

New device support
* ad7476
  - Add ad7091 support (ID only)
* ad9467
  - New driver for this 200/250 MSPS adi-axi-adc and SPI attached ADC.
* adi-axi-adc
  - New driver to support ADIs generic AXI ADC IP core, used to provide
    high speed interfaces to ADCs (JESD204B/C or parallel interfaces). Usually
    paired with a device using a slow configuration interface (spi etc)
    Includes DT bindings and some fixes for fpga headers.
* bmg160
  - Add support for BMI088 (ID only)
* max1241
  - New driver for this ADC.
* st_sensors
  - Add support for LIS2HH12 accelerometer
* sx9310
  - New driver supporting sx9310 and sx9311 proximity sensors.

Yaml DT binding conversions
* rockchip-saradc (including adding some missing parts)
* stm32-dac
* tsl2563
* vcnl4000

Features
* st_lsm6dsx
  - Add LIS3MDL as a possible sensor hub device.
* vcnl4000
  - Add new concept of near level (from DT) to provide to userspace which
    often needs to have some calibrated concept of 'near'.

Cleanups, minor fixes etc.
* core
  - Use snprintf for functions where strings are built and there is
    potential for overflow.
  - Correct docs to indicate mlock should not be used directly by drivers.
  - Fix up accidental dropping of a patch to use bitmap_zalloc.
  - Stop allowing enabling of buffers with no channels enabled.
  - Drop unused 'stufftoread' from iio_buffer.
  - Drop scan_el_attrs form iio_buffer as unused.
  - Reorder sanity checks in __iio_device_register to fail earlier.
  - Drop all the devm_ runregister / free functions from IIO as they
    were never used and encourage poor design.
* dma-buffer
  - Tidy up includes.
* dma-engine-buffer
  - Provide dev-managed allocator.
  - Fix an issue with printing a size_t
* cross subsystem (kxsd9, bmg160, mpu3050, bmi160, mpu6050, bmc150)
  - Replace some unnecessary casts of error ptrs and whilst there.
    use the %pe printf parameter to print them in a more useful fashion.
* cross subsystem
  - Drop casts in calls to regmap_bulk_read as they make no sense.
  - Use devm_platform_ioremap_resource to reduce boilerplate.
  - Fix typos in Analog Devices.
* counters/104-quad
  - Add Syed Nayyar Waris as an additional maintainer.
* ad7476
  - Generate CONVST signal internally rather than requiring external
    trigger.  Add sysfs read back as can now do so.
  - use devm_add_action_or_reset to tidy up error and remove handling.
* ad7793
  - Switch to read_avail from explicit attribute. Mostly done to avoid
    confusing people with a - sign (without surounding spaces) that
    was correct but checkpatch didn't like.
* adis library
  - Add missing newlines at end of error messages.
* adis16400
  - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
* adis16460
  - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
* ad_sigma_delta
  - Move some channel definitions into individual drivers to avoid
    having to deal with complex options.
* ak8974
  - Silence an error on deffered probe.
* bmp280
  - Harden against IRQ before registration.
  - Convert to read_avail instead of opencoding the equivalent.
  - Explicitly mark GPIO as optional.
  - Cleanup casts.
  - Remove line breaks from strings.
* htts221
  - Replace direct access to platform_data with dev_get_platdata().
  - Use device properties rather than device tree ones to allow ACPI
    probing.
  - Casting cleanups.
* intel_mrfld_adc
  - Don't use unaligned accessor for aligned data.
* isl29125
  - Reorder buer pre and post hooks to allow for coming core rework.
* ltc2983
  - Remove comp to bool.
* max1363
  - Stop using mlock from the iio_dev directly in favour of a local lock
    with clearly defined scope.
* max30100
  - Use generic device properties to allow ACPI probe.
* mpu6050
  - Convert to i2c_new_client_device.
  - Add debugfs register access.
* st_lsm6dsx
  - Provide means of configuring full scale on slave device if supported.
  - Drop include of st_sensors header to get one value. Its not otherwise
    used by this driver.
* st-sensors
  - Replace direct access to platform_data with dev_get_platdata().
  - Casting cleanups.
  - Avoid splitting strings.
* st_uvis25
  - Casting cleanups.
* tsl2563
  - Typo fix.
* tsl2772
  - scnprintf in a non obvious string building usecase. Note also 'fixes'
    a wrong calculation of remaining space that couldn't actually cause
    any trouble as there was lots of room.
* xilinx-xadc
  - Fix Lars-Peter spelling his own name wrong :) + additional typos.

* tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (101 commits)
  iio: magnetometer: ak8974: Silence deferred-probe error
  Documentation: ABI: document IIO in_proximity_nearlevel file
  iio: vcnl4000: Export near level property for proximity sensor
  dt-bindings: iio: light: vcnl4000: Add proximity-near-level
  dt-bindings: iio: Introduce common properties for iio sensors
  dt-bindings: iio: vcnl4000: convert bindings to YAML format
  iio: Fix misspellings of "Analog Devices"
  iio: light: isl29125: fix iio_triggered_buffer_{predisable,postenable} positions
  iio: adc: fsl-imx25-gcq: Use devm_platform_ioremap_resource
  iio: adc: at91-adc: Use devm_platform_ioremap_resource
  iio: adc: sun4i-gpadc-iio: Use devm_platform_ioremap_resource
  iio:light:ltr501: Drop unnecessary cast of parameter in regmap_bulk_read
  iio:magn:mmc35240: Drop unnecessary casts of val parameter in regmap_bulk*
  iio:imu:mpu6050: Tidy up parameters to regmap_bulk functions.
  iio:chemical:bme680: Tidy up parameters to regmap_bulk_read
  iio:chemical:atlas-sensor: Drop unnecessary explicit casts in regmap_bulk_read calls
  iio:accel:mxc4005: Drop unnecessary explicit casts in regmap_bulk_read calls
  iio: imu: st_lsm6dsx: drop huge include in sensor-hub driver
  iio: buffer: drop devm_iio_kfifo_free() API call
  iio: buffer: drop devm_iio_hw_consumer_free() API call
  ...

iio: magnetometer: ak8974: Silence deferred-probe error

It's not uncommon that voltage regulator becomes available later during
kernel's boot process. This patch adds info message about unavailable
regulators in a case of the deferred-probe error and also amends the
error message with a error code.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Documentation: ABI: document IIO in_proximity_nearlevel file

The vcnl4000 IIO driver introduced a new attribute
"in_proximity_nearlevel".  This adds it to the list of documented ABI
for sysfs-bus-iio.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: vcnl4000: Export near level property for proximity sensor

When an object can be considered close to the sensor is hardware
dependent. Allowing to configure the property via device tree
allows to configure this device specific value.

This is useful for e.g. iio-sensor-proxy to indicate to userspace
if an object is close to the sensor.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: light: vcnl4000: Add proximity-near-level

This value indicates when userspace should consider an object
near to the sensor/device.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: Introduce common properties for iio sensors

Introduce a file for common properties of iio sensors. So far this
contains the new proximity-near-level property for proximity sensors
that indicates when an object should be considered near.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: vcnl4000: convert bindings to YAML format

Convert the vcnl4000 device tree bindings to the new YAML format.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: Fix misspellings of "Analog Devices"

According to https://www.analog.com/, the company name is spelled
"Analog Devices".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: light: isl29125: fix iio_triggered_buffer_{predisable,postenable} positions

The iio_triggered_buffer_{predisable,postenable} functions attach/detach
the poll functions.

For the predisable hook, the disable code should occur before detaching
the poll func, and for the postenable hook, the poll func should be
attached before the enable code.

This change reworks the predisable/postenable hooks so that the pollfunc is
attached/detached in the correct position.
It also balances the calls a bit, by grouping the preenable and the
iio_triggered_buffer_postenable() into a single
isl29125_buffer_postenable() function.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: fsl-imx25-gcq: Use devm_platform_ioremap_resource

Use the helper function that wraps the calls to
platform_get_resource() and devm_ioremap_resource()
together. It reduces boilerplate and suggested by coccinelle.

Signed-off-by: Aishwarya Ramakrishnan <aishwaryarj100@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: at91-adc: Use devm_platform_ioremap_resource

Use the helper function that wraps the calls to
platform_get_resource() and devm_ioremap_resource()
together. It reduces boilerplate and suggested by coccinelle.

Signed-off-by: Aishwarya Ramakrishnan <aishwaryarj100@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: sun4i-gpadc-iio: Use devm_platform_ioremap_resource

Use the helper function that wraps the calls to platform_get_resource()
and devm_ioremap_resource() together.  Reduces boilerplate and suggested
by coccinelle.

Signed-off-by: Aishwarya Ramakrishnan <aishwaryarj100@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:light:ltr501: Drop unnecessary cast of parameter in regmap_bulk_read

This only occurs once in the driver and isn't needed in this case either,
so drop it.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

iio:magn:mmc35240: Drop unnecessary casts of val parameter in regmap_bulk*

Given the parameter is void *, casting to u8 * is unnecessary.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

iio:imu:mpu6050: Tidy up parameters to regmap_bulk functions.

A mixture of:
* Casts to u8 * for the val parameter which is void * and so needs no cast.
* Explicit sizes when we can use sizeof on the destination / source variable.

Not broken in anyway, I'm just trying to tidy up the is in the subsystem to
avoid it getting cut and paste into new drivers.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

iio:chemical:bme680: Tidy up parameters to regmap_bulk_read

A mixture of:
* Unnecessary casts of val parameter to u8 * which makes little sense as
  the function take a void *.
* Explicit sizes where we can use the destination type to define that.
  Note that's not true in all cases as we do read 3 bytes into 4 byte
  destinations.

Note that noting was broken here, I'm just trying to ensure this doesn't
get cut and paste into more drivers so cleaning these out subsystem wide.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Himanshu Jha <himanshujha199640@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>

iio:chemical:atlas-sensor: Drop unnecessary explicit casts in regmap_bulk_read calls

regmap_bulk_read takes a void * for its val parameter. It certainly
makes no sense to cast to a (u8 *) + no need to explicitly cast
at all when converting another pointer type to void *.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>

iio:accel:mxc4005: Drop unnecessary explicit casts in regmap_bulk_read calls

regmap_bulk_read takes a void * for its val parameter. It certainly
makes no sense to cast to a (u8 *) + no need to explicitly cast
at all when converting another pointer type to void *.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

iio: imu: st_lsm6dsx: drop huge include in sensor-hub driver

st_lsm6dsx is a standalone driver for STM IMU sensors and does not rely
on st_sensor common framework, so it does not include st_sensor common
definitions.
In st_lsm6dsx_shub driver st_sensors.h is used just to introduce the
default wai address for LIS3MDL sensor.
Drop this largely unconnected include file and introduce the default wai
address for LIS3MDL in st_lsm6dsx_ext_dev_settings register map

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: buffer: drop devm_iio_kfifo_free() API call

It's unused so far, so it can be removed. Also makes sense to remove it
to discourage weird uses of this call during review.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: buffer: drop devm_iio_hw_consumer_free() API call

It's unused so far, so it can be removed. Also makes sense to remove it
to discourage weird uses of this call during review.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: inkern: drop devm_iio_channel_release{_all} API calls

It's unused so far, so it can be removed. Also makes sense to remove it
to discourage weird uses of this call during review.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: core: drop devm_iio_trigger_free() API call

It's unused so far, so it can be removed. Also makes sense to remove it
to discourage weird uses of this call during review.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: core: drop devm_iio_trigger_unregister() API call

It's unused so far, so it can be removed. Also makes sense to remove it
to discourage weird uses of this call during review.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: core: drop devm_iio_device_free() API call

It's unused so far, so it can be removed. Also makes sense to remove it
to discourage weird uses of this call during review.

This is the last user of 'devm_iio_device_match()', so it can be removed as
well in this patch.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: core: drop devm_iio_triggered_buffer_cleanup() API call

It's unused so far, so it can be removed. Also makes sense to remove it
to discourage weird uses of this call during review.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: core: drop devm_iio_device_unregister() API call

It's unused so far, so it can be removed. Also makes sense to remove it
to discourage weird uses of this call during review.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: move 'indio_dev->info' null check first in __iio_device_register()

Moves this to be the first check, as it's very simple and fails the
registration earlier, instead of potentially initializing the
'indio_dev->label' and checking for duplicate indexes, and then failing
with this simple-check.

This is a minor optimization, since '__iio_device_register()' will waste
fewer validation cycles in case 'indio_dev->info' is NULL.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: buffer: remove 'scan_el_attrs' attribute group from buffer struct

This field doesn't seem used. It seems that only 'buffer->attrs' was ever
used to extend sysfs attributes for an IIO buffer.

Moving forward, it may not make sense to keep it. This patch removes the
field and it's initialization code.

Since we want to rework IIO buffer, to be able to add more buffers per IIO
device, we will merge [somehow] the 'buffer' & 'scan_elements' groups, and
we will continue to add the attributes to the 'buffer' group.

Removing it here, will also make the rework here a bit smaller, since
this code will not be present.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: adis: Add a missing '\n' in a log message

Message logged by 'dev_xxx()' or 'pr_xxx()' should end with a '\n'.

Fixes: 1fd456702692 ("iio: imu: adis: add support product ID check in adis_initial_startup")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: xilinx-xadc: Fix typo

Fix a typo. 'at the a time' -> 'at a time'.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: rockchip-saradc: add description for px30

The description below is already in use for px30.dtsi,
but was somehow never added to a document, so add
"rockchip,px30-saradc", "rockchip,rk3399-saradc"
for saradc nodes on a px30 platform to rockchip-saradc.yaml.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: rockchip-saradc: add description for rk3308

The description below is already in use for rk3308.dtsi,
but was somehow never added to a document, so add
"rockchip,rk3308-saradc", "rockchip,rk3399-saradc"
for saradc nodes on a rk3308 platform to rockchip-saradc.yaml.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: convert rockchip saradc bindings to yaml

Current dts files with 'saradc' nodes are manually verified.
In order to automate this process rockchip-saradc.txt
has to be converted to yaml.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: dma-buffer: Cleanup buffer.h/buffer_impl.h includes

The IIO DMA buffer is a DMA buffer implementation. As such it should
include buffer_impl.h rather than buffer.h.

The include to buffer.h in buffer-dma.h should be buffer_impl.h so it has
access to the struct iio_buffer definition. The code currently only works
because all places that use buffer-dma.h include buffer_impl.h before it.

The include to buffer.h in industrialio-buffer-dma.c  can be removed since
those file does not reference any of buffer consumer functions.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: Add MAX1241 driver

Add driver for the Maxim MAX1241 12-bit, single-channel ADC.

Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX1240-MAX1241.pdf
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Alexandru Lazar <alazar@startmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: Add MAX1241 bindings

Add device-tree bindings documentation for the MAX1241 device driver.

Signed-off-by: Alexandru Lazar <alazar@startmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: st_sensors: add support for LIS2HH12

Add support for STMicroelectronics LISHH12 accelerometer in st_accel
framework.

https://www.st.com/resource/en/datasheet/lis2hh12.pdf

Signed-off-by: Gaëtan André <rvlander@gaetanandre.eu>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: st_sensors: add st,lis2hh12 compatible entry

Add LIS2HH12 compatible entry.

Signed-off-by: Gaëtan André <rvlander@gaetanandre.eu>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: st_lsm6dsx: Add sensor hub device LIS3MDL

Add LIS3MDL register map to sensor hub device table.
Tested with LSM6DSM.

Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: st_lsm6dsx: Increase ODR_LIST_SIZE

Support for sensor with up to 8 different ODR settings.
Required for supporting LIS3MDL as sensor hub slave device.

Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: adis16460: use DEFINE_DEBUGFS_ATTRIBUTE instead of DEFINE_SIMPLE_ATTRIBUTE

debugfs_create_file_unsafe does not protect the fops handed to it
against file removal. DEFINE_DEBUGFS_ATTRIBUTE makes the fops aware of
the file lifetime and thus protects it against removal.

Signed-off-by: Rohit Sarkar <rohitsarkar5398@gmail.com>
Tested-by Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: adis16400: use DEFINE_DEBUGFS_ATTRIBUTE instead of DEFINE_SIMPLE_ATTRIBUTE

debugfs_create_file_unsafe does not protect the fops handed to it
against file removal. DEFINE_DEBUGFS_ATTRIBUTE makes the fops aware of
the file lifetime and thus protects it against removal.

Signed-off-by: Rohit Sarkar <rohitsarkar5398@gmail.com>
Tested-by Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: st_lsm6dsx: configure full scale on slave device if supported

Introduce st_lsm6dsx_shub_set_full_scale routine in order to configure
the i2c slave device sensitivity

Tested-by: Jimmy Assarsson <jimmyassarsson@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: dac: stm32-dac: convert bindings to json-schema

Convert the STM32 DAC binding to DT schema format using json-schema

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: tsl2563: convert bindings to YAML

Convert the TSL2563 device tree bindings to the new YAML format.

Signed-off-by: Nishant Malpani <nish.malpani25@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: add bindings doc for AD9467 ADC

This change adds the binding doc for the AD9467 ADC.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad9467: add support AD9467 ADC

The AD9467 is a 16-bit, monolithic, IF sampling analog-to-digital converter
(ADC). It is optimized for high performanceover wide bandwidths and ease of
use. The product operates at a 250 MSPS conversion rate and is designed for
wireless receivers, instrumentation, and test equipment that require a high
dynamic range. The ADC requires 1.8 V and 3.3 V power supplies and a low
voltage differential input clock for full performance operation. No
external reference or driver components are required for many applications.
Data outputs are LVDS compatible (ANSI-644 compatible) and include the
means to reduce the overall current needed for short trace distances.

Since the chip can operate at such high sample-rates (much higher than
classical interfaces), it requires that a DMA controller be used to
interface directly to the chip and push data into memory.
Typically, the AXI ADC IP core is used to interface with it.

Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/AD9467.pdf

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: add bindings doc for AXI ADC driver

This change adds the bindings documentation for the AXI ADC driver.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: adi-axi-adc: add support for AXI ADC IP core

This change adds support for the Analog Devices Generic AXI ADC IP core.
The IP core is used for interfacing with analog-to-digital (ADC) converters
that require either a high-speed serial interface (JESD204B/C) or a source
synchronous parallel interface (LVDS/CMOS).

Usually, some other interface type (i.e SPI) is used as a control interface
for the actual ADC, while the IP core (controlled via this driver), will
interface to the data-lines of the ADC and handle  the streaming of data
into memory via DMA.

Because of this, the AXI ADC driver needs the other SPI-ADC driver to
register with it. The SPI-ADC needs to be register via the SPI framework,
while the AXI ADC registers as a platform driver. The two cannot be ordered
in a hierarchy as both drivers have their own registers, and trying to
organize this [in a hierarchy becomes] problematic when trying to map
memory/registers.

There are some modes where the AXI ADC can operate as standalone ADC, but
those will be implemented at a later point in time.

DocLink: https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: buffer-dmaengine: add dev-managed calls for buffer alloc

Currently, when using a 'iio_dmaengine_buffer_alloc()', an matching call to
'iio_dmaengine_buffer_free()' must be made.

With this change, this can be avoided by using
'devm_iio_dmaengine_buffer_alloc()'. The buffer will get free'd via the
device's devres handling.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: buffer-dmaengine: use %zu specifier for sprintf(align)

The 'size_t' type behaves differently on 64-bit architectures, and causes
compiler a warning of the sort "format '%u' expects argument of type
'unsigned int', but argument 3 has type 'size_t {aka long unsigned int}'".

This change adds the correct specifier for the 'align' field.

Fixes: 4538c18568099 ("iio: buffer-dmaengine: Report buffer length requirements")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

include: fpga: adi-axi-common.h: add version helper macros

The format for all ADI AXI IP cores is the same.
i.e. 'major.minor.patch'.

This patch adds the helper macros to be re-used in ADI AXI drivers.

Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

include: fpga: adi-axi-common.h: fixup whitespace tab -> space

The initial version use a tab between '#define' & 'ADI_AXI_REG_VERSION'.
This changes it to space. The change is purely cosmetic.

Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: buffer: drop left-over 'stufftoread' field

This seems like a left-over from a7348347ba8a4 ("staging:iio: Add polling
of events on the ring access chrdev.").

Then it was moved into the sca3000 driver around 9dd4694dafbd8 ("iio:
staging: sca3000: hide stufftoread logic"), and that one seemed to be the
only user of this.

Then it eventually was no longer used after 152a6a884ae1
("staging:iio:accel:sca3000 move to hybrid hard / soft buffer design.")

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: temperature: ltc2983: remove redundant comparison to bool

Remove redundant comparison to a boolean variable.

Fixes coccinelle warning:
drivers/iio/temperature//ltc2983.c:393:20-32: WARNING: Comparison to bool
drivers/iio/temperature//ltc2983.c:394:20-32: WARNING: Comparison to bool

Signed-off-by: Rohit Sarkar <rohitsarkar5398@gmail.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: inv_mpu6050: add debugfs register r/w interface

The debugfs interface provides direct access to read and write device
registers if debugfs is enabled.

Signed-off-by: Rohit Sarkar <rohitsarkar5398@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: pressure: bmp280: Join string literals back

For easy grepping on debug purposes join string literals back in
the messages.

No functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: pressure: bmp280: Drop unneeded explicit castings

In few places the unnecessary explicit castings are being used.
Drop them for good.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: pressure: bmp280: Explicitly mark GPIO optional

Show by using a corresponding API call that GPIO is optional.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: pressure: bmp280: Convert to use ->read_avail()

Convert to use ->read_avail() instead of open-coded attribute handling.

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>