review.tizen.org Git - platform/kernel/linux-starfive.git/log

drm/amd/display: fix the build when DRM_AMD_DC_DCN is not set

commit 5ca9b33ece9aa048b6ec9411f054e1b781662327 upstream

Move the new callback outside of the guard.

Fixes: dc55b106ad47 ("drm/amd/display: Disable phantom OTG after enable for plane disable")
CC: Alvin Lee <Alvin.Lee2@amd.com>
CC: Alan Liu <HaoPing.Liu@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Retain phantom plane/stream if validation fails

commit 9b216b7e38f5381bcc3ad21c5ac614aa577ab8f2 upstream

[Description]
- If we fail validation, we should retain the phantom
  stream/planes
- Full updates assume that phantom pipes will be fully
  removed, but if validation fails we keep the phantom
  pipes
- Therefore we have to retain the plane/stream if validation
  fails (since the refcount is decremented before validation,
  and the expectation is that it's fully freed when the  old
  dc_state is released)

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Disable phantom OTG after enable for plane disable

commit dc55b106ad477c67f969f3432d9070c6846fb557 upstream

[Description]
- Need to disable phantom OTG after it's enabled
  in order to restore it to it's original state.
- If it's enabled and then an MCLK switch comes in
  we may not prefetch the correct data since the phantom
  OTG could already be in the middle of the frame.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Use update plane and stream routine for DCN32x

commit dddde627807c22d6f15f4417eb395b13a1ca88f9 upstream

Sub-viewport (Subvp) feature is used for changing MCLK without causing
any display artifact, requiring special treatment from the plane and
stream perspective since DC needs to read data from the cache when using
subvp. However, the function dc_commit_updates_for_stream does not
provide all the support needed by this feature which will make this
function legacy at some point. For this reason, this commit enables
dc_update_planes_and_stream for ASICs that support this feature but
preserves the old behavior for other ASICs. However,
dc_update_planes_and_stream should replace dc_commit_updates_for_stream
for all ASICs since it does most of the tasks executed by
dc_commit_updates_for_stream with other extra operations, but we need to
run tests before making this change.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Avoid ABM when ODM combine is enabled for eDP

commit 7fffb03b4045c862f904a88b852dc509c4e46406 upstream

ODM to combine on the eDP panel with ABM causes the color difference to
the panel since the ABM module only sets one pipe. Hence, this commit
blocks ABM in case of ODM combined on eDP.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Update OTG instance in the commit stream

commit eef019eabc3cd0fddcffefbf67806a4d8cca29bb upstream

OTG instance is not updated in dc_commit_state_no_check for newly
committed streams because mode_change is not set. Notice that OTG update
is part of the software state, and after hardware programming, it must
be updated; for this reason, this commit updates the OTG offset right
after hardware programming.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Handle seamless boot stream

commit 170390e587a69b2a24abac39eb3ae6ec28a4d7f2 upstream

A seamless boot stream has hardware resources assigned to it, and adding
a new stream means rebuilding the current assignment. It is desirable to
avoid this situation since it may cause light-up issues on the VGA
monitor on USB-C. This commit swaps the seamless boot stream to pipe 0
(if necessary) to ensure that the pipe context matches.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Add function for validate and update new stream

commit a5e39ae27c3a305c6aafc0e423b0cb2c677facde upstream

DC stream can be seen as a representation of the DCN backend or the data
struct that represents the center of the display pipeline. The front end
(i.e., planes) is connected to the DC stream, and in its turn, streams
are connected to the DC link. Due to this dynamic, DC must handle the
following scenarios:

1. A stream is removed;
2. A new stream is created;
3. An unchanged stream had some updates on its planes.

These combinations require that the new stream data struct become
updated and has a valid global state. For handling multiple corner cases
associated with stream operations, this commit introduces a function
dedicated to manipulating stream changes and invokes the state
validation function after that.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Handle virtual hardware detect

commit 987b96eb860036ab79051fb271f7fbdc01c9daf5 upstream

If virtual hardware is detected, there is no reason to run the full
dc_commit_streams process, and DC can return true immediately.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pm: avoid unintentional shutdown due to temperature momentary fluctuation

commit b75efe88b20c2be28b67e2821a794cc183e32374 upstream

An intentional delay is added on soft ctf triggered. Then there will
be a double check for the GPU temperature before taking further
action. This can avoid unintended shutdown due to temperature
momentary fluctuation.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[ Hand-modified because:
  * XCP support added to amdgpu.h in kernel 6.5
    and is not necessary for this fix.
  * SMU microcode initialization moved in
    32806038aa76 ("drm/amd: Load SMU microcode during early_init") ]
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1267
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2779
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pm: fulfill powerplay peak profiling mode shader/memory clock settings

commit b1a9557a7d00c758ed9e701fbb3445a13a49506f upstream

Enable peak profiling mode shader/memory clock reporting for powerplay
framework.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pm: expose swctf threshold setting for legacy powerplay

commit 064329c595da56eff6d7a7e7760660c726433139 upstream

Preparation for coming optimization which eliminates the influence of
GPU temperature momentary fluctuation.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pm: fulfill swsmu peak profiling mode shader/memory clock settings

commit 975b4b1d90ccf83da252907108f4090fb61b816e upstream

Enable peak profiling mode shader/memory clocks reporting for swsmu
framework.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nilfs2: fix use-after-free of nilfs_root in dirtying inodes via iput

commit f8654743a0e6909dc634cbfad6db6816f10f3399 upstream.

During unmount process of nilfs2, nothing holds nilfs_root structure after
nilfs2 detaches its writer in nilfs_detach_log_writer().  Previously,
nilfs_evict_inode() could cause use-after-free read for nilfs_root if
inodes are left in "garbage_list" and released by nilfs_dispose_list at
the end of nilfs_detach_log_writer(), and this bug was fixed by commit
9b5a04ac3ad9 ("nilfs2: fix use-after-free bug of nilfs_root in
nilfs_evict_inode()").

However, it turned out that there is another possibility of UAF in the
call path where mark_inode_dirty_sync() is called from iput():

nilfs_detach_log_writer()
  nilfs_dispose_list()
    iput()
      mark_inode_dirty_sync()
        __mark_inode_dirty()
          nilfs_dirty_inode()
            __nilfs_mark_inode_dirty()
              nilfs_load_inode_block() --> causes UAF of nilfs_root struct

This can happen after commit 0ae45f63d4ef ("vfs: add support for a
lazytime mount option"), which changed iput() to call
mark_inode_dirty_sync() on its final reference if i_state has I_DIRTY_TIME
flag and i_nlink is non-zero.

This issue appears after commit 28a65b49eb53 ("nilfs2: do not write dirty
data after degenerating to read-only") when using the syzbot reproducer,
but the issue has potentially existed before.

Fix this issue by adding a "purging flag" to the nilfs structure, setting
that flag while disposing the "garbage_list" and checking it in
__nilfs_mark_inode_dirty().

Unlike commit 9b5a04ac3ad9 ("nilfs2: fix use-after-free bug of nilfs_root
in nilfs_evict_inode()"), this patch does not rely on ns_writer to
determine whether to skip operations, so as not to break recovery on
mount.  The nilfs_salvage_orphan_logs routine dirties the buffer of
salvaged data before attaching the log writer, so changing
__nilfs_mark_inode_dirty() to skip the operation when ns_writer is NULL
will cause recovery write to fail.  The purpose of using the cleanup-only
flag is to allow for narrowing of such conditions.

Link: https://lkml.kernel.org/r/20230728191318.33047-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+74db8b3087f293d3a13a@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/000000000000b4e906060113fd63@google.com
Fixes: 0ae45f63d4ef ("vfs: add support for a lazytime mount option")
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org> # 4.0+
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

radix tree test suite: fix incorrect allocation size for pthreads

commit cac7ea57a06016e4914848b707477fb07ee4ae1c upstream.

Currently the pthread allocation for each array item is based on the size
of a pthread_t pointer and should be the size of the pthread_t structure,
so the allocation is under-allocating the correct size. Fix this by using
the size of each element in the pthreads array.

Static analysis cppcheck reported:
tools/testing/radix-tree/regression1.c:180:2: warning: Size of pointer
'threads' used instead of size of its data. [pointerSize]

Link: https://lkml.kernel.org/r/20230727160930.632674-1-colin.i.king@gmail.com
Fixes: 1366c37ed84b ("radix tree test harness")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (pmbus/bel-pfe) Enable PMBUS_SKIP_STATUS_CHECK for pfe1100

commit f38963b9cd0645a336cf30c5da2e89e34e34fec3 upstream.

Skip status check for both pfe1100 and pfe3000 because the communication
error is also observed on pfe1100 devices.

Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Fixes: 626bb2f3fb3c hwmon: (pmbus) add driver for BEL PFE1100 and PFE3000
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230804221403.28931-1-rentao.bupt@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpuidle: dt_idle_genpd: Add helper function to remove genpd topology

commit 9a8fa00dad3c7b260071f2f220cfb00505372c40 upstream.

Genpd parent and child domain topology created using dt_idle_pd_init_topology()
needs to be removed during error cases.

Add new helper function dt_idle_pd_remove_topology() for same.

Cc: stable@vger.kernel.org
Reviewed-by: Ulf Hanssson <ulf.hansson@linaro.org>
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: limit DPIA link rate to HBR3

commit 0e69ef6ea82e8eece7d2b2b45a0da9670eaaefff upstream.

[Why]
DPIA doesn't support UHBR, driver should not enable UHBR
for dp tunneling

[How]
limit DPIA link rate to HBR3

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Peichen Huang <peichen.huang@amd.com>
Reviewed-by: Mustapha Ghaddar <Mustapha.Ghaddar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd: Disable S/G for APUs when 64GB or more host memory

commit 08fffa74d9772d9538338be3f304006c94dde6f0 upstream.

Users report a white flickering screen on multiple systems that
is tied to having 64GB or more memory.  When S/G is enabled pages
will get pinned to both VRAM carve out and system RAM leading to
this.

Until it can be fixed properly, disable S/G when 64GB of memory or
more is detected.  This will force pages to be pinned into VRAM.
This should fix white screen flickers but if VRAM pressure is
encountered may lead to black screens.  It's a trade-off for now.

Fixes: 81d0bcf99009 ("drm/amdgpu: make display pinning more flexible (v2)")
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: <stable@vger.kernel.org> # 6.1.y: bf0207e172703 ("drm/amdgpu: add S/G display parameter")
Cc: <stable@vger.kernel.org> # 6.4.y
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2735
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: add S/G display parameter

commit bf0207e1727031798f300afa17f9bbeceac6da87 upstream.

Some users have reported flickerng with S/G display. We've
tried extensively to reproduce and debug the issue on a wide
variety of platform configurations (DRAM bandwidth, etc.) and
a variety of monitors, but so far have not been able to. We
disabled S/G display on a number of platforms to address this
but that leads to failure to pin framebuffers errors and
blank displays when there is memory pressure or no displays
at all on systems with limited carveout (e.g., Chromebooks).
Add a option to disable this as a debugging option as a
way for users to disable this, depending on their use case,
and for us to help debug this further.

v2: fix typo

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: check attr flag before set cursor degamma on DCN3+

commit 96b020e2163fb2197266b2f71b1007495206e6bb upstream.

Don't set predefined degamma curve to cursor plane if the cursor
attribute flag is not set. Applying a degamma curve to the cursor by
default breaks userspace expectation. Checking the flag before
performing any color transformation prevents too dark cursor gamma in
DCN3+ on many Linux desktop environment (KDE Plasma, GNOME,
wlroots-based, etc.) as reported at:
- https://gitlab.freedesktop.org/drm/amd/-/issues/1513

This is the same approach followed by DCN2 drivers where the issue is
not present.

Fixes: 03f54d7d3448 ("drm/amd/display: Add DCN3 DPP")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1513
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: fix possible UAF in amdgpu_cs_pass1()

commit 90e065677e0362a777b9db97ea21d43a39211399 upstream.

Since the gang_size check is outside of chunk parsing
loop, we need to reset i before we free the chunk data.

Suggested by Ye Zhang (@VAR10CK) of Baidu Security.

Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/shmem-helper: Reset vma->vm_ops before calling dma_buf_mmap()

commit 07dd476f6116966cb2006e25fdcf48f0715115ff upstream.

The dma-buf backend is supposed to provide its own vm_ops, but some
implementation just have nothing special to do and leave vm_ops
untouched, probably expecting this field to be zero initialized (this
is the case with the system_heap implementation for instance).
Let's reset vma->vm_ops to NULL to keep things working with these
implementations.

Fixes: 26d3ac3cb04d ("drm/shmem-helpers: Redirect mmap for imported dma-buf")
Cc: <stable@vger.kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reported-by: Roman Stratiienko <r.stratiienko@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Roman Stratiienko <r.stratiienko@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230724112610.60974-1-boris.brezillon@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/nvkm/dp: Add workaround to fix DP 1.3+ DPCD issues

commit e4060dad253352382b20420d8ef98daab24dbc17 upstream.

Currently we use the drm_dp_dpcd_read_caps() helper in the DRM side of
nouveau in order to read the DPCD of a DP connector, which makes sure we do
the right thing and also check for extended DPCD caps. However, it turns
out we're not currently doing this on the nvkm side since we don't have
access to the drm_dp_aux structure there - which means that the DRM side of
the driver and the NVKM side can end up with different DPCD capabilities
for the same connector.

Ideally in order to fix this, we just want to use the
drm_dp_read_dpcd_caps() helper in nouveau. That's not currently possible
though, and is going to depend on having a bunch of the DP code moved out
of nvkm and into the DRM side of things as part of the GSP enablement work.

Until then however, let's workaround this problem by porting a copy of
drm_dp_read_dpcd_caps() into NVKM - which should fix this issue.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/211
Link: https://patchwork.freedesktop.org/patch/msgid/20230728225858.350581-1-lyude@redhat.com
(cherry picked from commit cc4adf3a7323212f303bc9ff0f96346c44fcba06 in drm-misc-next)
Cc: <stable@vger.kernel.org> # 6.3+
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/gr: enable memory loads on helper invocation on all channels

commit 1cb9e2ef66d53b020842b18762e30d0eb4384de8 upstream.

We have a lurking bug where Fragment Shader Helper Invocations can't load
from memory. But this is actually required in OpenGL and is causing random
hangs or failures in random shaders.

It is unknown how widespread this issue is, but shaders hitting this can
end up with infinite loops.

We enable those only on all Kepler and newer GPUs where we use our own
Firmware.

Nvidia's firmware provides a way to set a kernelspace controlled list of
mmio registers in the gr space from push buffers via MME macros.

v2: drop code for gm200 and newer.

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@gmail.com>
Cc: nouveau@lists.freedesktop.org
Cc: stable@vger.kernel.org # 4.19+
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230622152017.2512101-1-kherbst@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme-pci: add NVME_QUIRK_BOGUS_NID for Samsung PM9B1 256G and 512G

commit 688b419c57c13637d95d7879e165fff3dec581eb upstream.

The Samsung PM9B1 512G SSD found in some Lenovo Yoga 7 14ARB7 laptop units
reports eui as 0001000200030004 when resuming from s2idle, causing the
device to be removed with this error in dmesg:

nvme nvme0: identifiers changed for nsid 1

To fix this, add a quirk to ignore namespace identifiers for this device.

Signed-off-by: August Wikerfors <git@augustwikerfors.se>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv/kexec: handle R_RISCV_CALL_PLT relocation type

commit d0b4f95a51038becce4bdab4789aa7ce59d4ea6e upstream.

R_RISCV_CALL has been deprecated and replaced by R_RISCV_CALL_PLT. See Enum
18-19 in Table 3. Relocation types here:

https://github.com/riscv-non-isa/riscv-elf-psabi-doc/blob/master/riscv-elf.adoc

It was deprecated in ("Deprecated R_RISCV_CALL, prefer R_RISCV_CALL_PLT"):

https://github.com/riscv-non-isa/riscv-elf-psabi-doc/commit/a0dced85018d7a0ec17023c9389cbd70b1dbc1b0

Recent tools (at least GNU binutils-2.40) already use R_RISCV_CALL_PLT.
Kernels built with such binutils fail kexec_load_file(2) with:

kexec_image: Unknown rela relocation: 19
kexec_image: Error loading purgatory ret=-8

The binary code at the call site remains the same, so tell
arch_kexec_apply_relocations_add() to handle _PLT alike.

Fixes: 838b3e28488f ("RISC-V: Load purgatory in kexec_file")
Signed-off-by: Torsten Duwe <duwe@suse.de>
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Cc: Li Zhengyu <lizhengyu3@huawei.com>
Cc: stable@vger.kernel.org
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/all/b046b164af8efd33bbdb7d4003273bdf9196a5b0.1690365011.git.petr.tesarik.ext@huawei.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv,mmio: Fix readX()-to-delay() ordering

commit 4eb2eb1b4c0eb07793c240744843498564a67b83 upstream.

Section 2.1 of the Platform Specification [1] states:

Unless otherwise specified by a given I/O device, I/O devices are on
ordering channel 0 (i.e., they are point-to-point strongly ordered).

which is not sufficient to guarantee that a readX() by a hart completes
before a subsequent delay() on the same hart (cf. memory-barriers.txt,
"Kernel I/O barrier effects").

Set the I(nput) bit in __io_ar() to restore the ordering, align inline
comments.

[1] https://github.com/riscv/riscv-platform-specs

Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20230803042738.5937-1-parri.andrea@gmail.com
Fixes: fab957c11efe ("RISC-V: Atomic and Locking Code")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv/kexec: load initrd high in available memory

commit 49af7a2cd5f678217b8b4f86a29411aebebf3e78 upstream.

When initrd is loaded low, the secondary kernel fails like this:

INITRD: 0xdc581000+0x00eef000 overlaps in-use memory region

This initrd load address corresponds to the _end symbol, but the
reservation is aligned on PMD_SIZE, as explained by a comment in
setup_bootmem().

It is technically possible to align the initrd load address accordingly,
leaving a hole between the end of kernel and the initrd, but it is much
simpler to allocate the initrd top-down.

Fixes: 838b3e28488f ("RISC-V: Load purgatory in kexec_file")
Signed-off-by: Torsten Duwe <duwe@suse.de>
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Cc: stable@vger.kernel.org
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/all/67c8eb9eea25717c2c8208d9bfbfaa39e6e2a1c6.1690365011.git.petr.tesarik.ext@huawei.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mana: Fix MANA VF unload when hardware is unresponsive

commit a7dfeda6fdeccab4c7c3dce9a72c4262b9530c80 upstream.

When unloading the MANA driver, mana_dealloc_queues() waits for the MANA
hardware to complete any inflight packets and set the pending send count
to zero. But if the hardware has failed, mana_dealloc_queues()
could wait forever.

Fix this by adding a timeout to the wait. Set the timeout to 120 seconds,
which is a somewhat arbitrary value that is more than long enough for
functional hardware to complete any sends.

Cc: stable@vger.kernel.org
Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Link: https://lore.kernel.org/r/1691576525-24271-1-git-send-email-schakrabarti@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: pl330: Return DMA_PAUSED when transaction is paused

commit 8cda3ececf07d374774f6a13e5a94bc2dc04c26c upstream.

pl330_pause() does not set anything to indicate paused condition which
causes pl330_tx_status() to return DMA_IN_PROGRESS. This breaks 8250
DMA flush after the fix in commit 57e9af7831dc ("serial: 8250_dma: Fix
DMA Rx rearm race"). The function comment for pl330_pause() claims
pause is supported but resume is not which is enough for 8250 DMA flush
to work as long as DMA status reports DMA_PAUSED when appropriate.

Add PAUSED state for descriptor and mark BUSY descriptors with PAUSED
in pl330_pause(). Return DMA_PAUSED from pl330_tx_status() when the
descriptor is PAUSED.

Reported-by: Richard Tresidder <rtresidd@electromag.com.au>
Tested-by: Richard Tresidder <rtresidd@electromag.com.au>
Fixes: 88987d2c7534 ("dmaengine: pl330: add DMA_PAUSE feature")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-serial/f8a86ecd-64b1-573f-c2fa-59f541083f1a@electromag.com.au/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230526105434.14959-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: fix disconnect vs accept race

commit 511b90e39250135a7f900f1c3afbce25543018a2 upstream.

Despite commit 0ad529d9fd2b ("mptcp: fix possible divide by zero in
recvmsg()"), the mptcp protocol is still prone to a race between
disconnect() (or shutdown) and accept.

The root cause is that the mentioned commit checks the msk-level
flag, but mptcp_stream_accept() does acquire the msk-level lock,
as it can rely directly on the first subflow lock.

As reported by Christoph than can lead to a race where an msk
socket is accepted after that mptcp_subflow_queue_clean() releases
the listener socket lock and just before it takes destructive
actions leading to the following splat:

BUG: kernel NULL pointer dereference, address: 0000000000000012
PGD 5a4ca067 P4D 5a4ca067 PUD 37d4c067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 2 PID: 10955 Comm: syz-executor.5 Not tainted 6.5.0-rc1-gdc7b257ee5dd #37
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
RIP: 0010:mptcp_stream_accept+0x1ee/0x2f0 include/net/inet_sock.h:330
Code: 0a 09 00 48 8b 1b 4c 39 e3 74 07 e8 bc 7c 7f fe eb a1 e8 b5 7c 7f fe 4c 8b 6c 24 08 eb 05 e8 a9 7c 7f fe 49 8b 85 d8 09 00 00 <0f> b6 40 12 88 44 24 07 0f b6 6c 24 07 bf 07 00 00 00 89 ee e8 89
RSP: 0018:ffffc90000d07dc0 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff888037e8d020 RCX: ffff88803b093300
RDX: 0000000000000000 RSI: ffffffff833822c5 RDI: ffffffff8333896a
RBP: 0000607f82031520 R08: ffff88803b093300 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000003e83 R12: ffff888037e8d020
R13: ffff888037e8c680 R14: ffff888009af7900 R15: ffff888009af6880
FS: 00007fc26d708640(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000012 CR3: 0000000066bc5001 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
do_accept+0x1ae/0x260 net/socket.c:1872
__sys_accept4+0x9b/0x110 net/socket.c:1913
__do_sys_accept4 net/socket.c:1954 [inline]
__se_sys_accept4 net/socket.c:1951 [inline]
__x64_sys_accept4+0x20/0x30 net/socket.c:1951
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8

Address the issue by temporary removing the pending request socket
from the accept queue, so that racing accept() can't touch them.

After depleting the msk - the ssk still exists, as plain TCP sockets,
re-insert them into the accept queue, so that later inet_csk_listen_stop()
will complete the tcp socket disposal.

Fixes: 2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/423
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-4-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: avoid bogus reset on fallback close

commit ff18f9ef30ee87740f741b964375d0cfb84e1ec2 upstream.

Since the blamed commit, the MPTCP protocol unconditionally sends
TCP resets on all the subflows on disconnect().

That fits full-blown MPTCP sockets - to implement the fastclose
mechanism - but causes unexpected corruption of the data stream,
caught as sporadic self-tests failures.

Fixes: d21f83485518 ("mptcp: use fastclose on more edge scenarios")
Cc: stable@vger.kernel.org
Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/419
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-3-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: mptcp: join: fix 'implicit EP' test

commit c8c101ae390a3e817369e94a6f12a1ddea420702 upstream.

mptcp_join 'implicit EP' test currently fails when using ip mptcp:

  $ ./mptcp_join.sh -iI
  <snip>
  001 implicit EP    creation[fail] expected '10.0.2.2 10.0.2.2 id 1 implicit' found '10.0.2.2 id 1 rawflags 10 '
  Error: too many addresses or duplicate one: -22.
                     ID change is prevented[fail] expected '10.0.2.2 10.0.2.2 id 1 implicit' found '10.0.2.2 id 1 rawflags 10 '
                     modif is allowed[fail] expected '10.0.2.2 10.0.2.2 id 1 signal' found '10.0.2.2 id 1 signal '

This happens because of two reasons:
- iproute v6.3.0 does not support the implicit flag, fixed with
  iproute2-next commit 3a2535a41854 ("mptcp: add support for implicit
  flag")
- pm_nl_check_endpoint wrongly expects the ip address to be repeated two
  times in iproute output, and does not account for a final whitespace
  in it.

This fixes the issue trimming the whitespace in the output string and
removing the double address in the expected string.

Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-2-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: mptcp: join: fix 'delete and re-add' test

commit aaf2123a5cf46dbd97f84b6eee80269758064d93 upstream.

mptcp_join 'delete and re-add' test fails when using ip mptcp:

  $ ./mptcp_join.sh -iI
  <snip>
  002 delete and re-add                    before delete[ ok ]
                                           mptcp_info subflows=1         [ ok ]
  Error: argument "ADDRESS" is wrong: invalid for non-zero id address
                                           after delete[fail] got 2:2 subflows expected 1

This happens because endpoint delete includes an ip address while id is
not 0, contrary to what is indicated in the ip mptcp man page:

"When used with the delete id operation, an IFADDR is only included when
the ID is 0."

This fixes the issue using the $addr variable in pm_nl_del_endpoint()
only when id is 0.

Fixes: 34aa6e3bccd8 ("selftests: mptcp: add ip mptcp wrappers")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-1-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: adjust ndisc_is_useropt() to also return true for PIO

commit 048c796beb6eb4fa3a5a647ee1c81f5c6f0f6a2a upstream.

The upcoming (and nearly finalized):
https://datatracker.ietf.org/doc/draft-collink-6man-pio-pflag/
will update the IPv6 RA to include a new flag in the PIO field,
which will serve as a hint to perform DHCPv6-PD.

As we don't want DHCPv6 related logic inside the kernel, this piece of
information needs to be exposed to userspace. The simplest option is to
simply expose the entire PIO through the already existing mechanism.

Even without this new flag, the already existing PIO R (router address)
flag (from RFC6275) cannot AFAICT be handled entirely in kernel,
and provides useful information that should be exposed to userspace
(the router's global address, for use by Mobile IPv6).

Also cc'ing stable@ for inclusion in LTS, as while technically this is
not quite a bugfix, and instead more of a feature, it is absolutely
trivial and the alternative is manually cherrypicking into all Android
Common Kernel trees - and I know Greg will ask for it to be sent in via
LTS instead...

Cc: Jen Linkova <furry@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org>
Cc: stable@vger.kernel.org
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20230807102533.1147559-1-maze@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: moxart: read scr register without changing byte order

commit d44263222134b5635932974c6177a5cba65a07e8 upstream.

Conversion from big-endian to native is done in a common function
mmc_app_send_scr(). Converting in moxart_transfer_pio() is extra.
Double conversion on a LE system returns an incorrect SCR value,
leads to errors:

mmc0: unrecognised SCR structure version 8

Fixes: 1b66e94e6b99 ("mmc: moxart: Add MOXA ART SD/MMC driver")
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230627120549.2400325-1-saproj@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wireguard: allowedips: expand maximum node depth

commit 46622219aae2b67813fe31a7b8cb7da5baff5c8a upstream.

In the allowedips self-test, nodes are inserted into the tree, but it
generated an even amount of nodes, but for checking maximum node depth,
there is of course the root node, which makes the total number
necessarily odd. With two few nodes added, it never triggered the
maximum depth check like it should have. So, add 129 nodes instead of
128 nodes, and do so with a more straightforward scheme, starting with
all the bits set, and shifting over one each time. Then increase the
maximum depth to 129, and choose a better name for that variable to
make it clear that it represents depth as opposed to bits.

Cc: stable@vger.kernel.org
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20230807132146.2191597-2-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: forwarding: Set default IPv6 traceroute utility

commit 38f7c44d6e760a8513557e27340d61b820c91b8f upstream.

The test uses the 'TROUTE6' environment variable to encode the name of
the IPv6 traceroute utility. By default (without a configuration file),
this variable is not set, resulting in failures:

# ./ip6_forward_instats_vrf.sh
TEST: ping6                                                         [ OK ]
TEST: Ip6InTooBigErrors                                             [ OK ]
TEST: Ip6InHdrErrors                                                [FAIL]
TEST: Ip6InAddrErrors                                               [ OK ]
TEST: Ip6InDiscards                                                 [ OK ]

Fix by setting a default utility name and skip the test if the utility
is not present.

Fixes: 0857d6f8c759 ("ipv6: When forwarding count rx stats on the orig netdev")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-6-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: rtw89: fix 8852AE disconnection caused by RX full flags

commit b74bb07cdab6859e1a3fc9fe7351052176322ddf upstream.

RX full flags are raised if certain types of RX FIFO are full, and then
drop all following MPDU of AMPDU. In order to resume to receive MPDU
when RX FIFO becomes available, we clear the register bits by the
commit a0d99ebb3ecd ("wifi: rtw89: initialize DMA of CMAC"). But, 8852AE
needs more settings to support this. To quickly fix disconnection problem,
revert the behavior as before.

Fixes: a0d99ebb3ecd ("wifi: rtw89: initialize DMA of CMAC")
Reported-by: Damian B <bronecki.damian@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217710
Cc: <Stable@vger.kernel.org>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Damian B <bronecki.damian@gmail.com>
Link: https://lore.kernel.org/r/20230808005426.5327-1-pkshih@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: nl80211: fix integer overflow in nl80211_parse_mbssid_elems()

commit 6311071a056272e1e761de8d0305e87cc566f734 upstream.

nl80211_parse_mbssid_elems() uses a u8 variable num_elems to count the
number of MBSSID elements in the nested netlink attribute attrs, which can
lead to an integer overflow if a user of the nl80211 interface specifies
256 or more elements in the corresponding attribute in userspace. The
integer overflow can lead to a heap buffer overflow as num_elems determines
the size of the trailing array in elems, and this array is thereafter
written to for each element in attrs.

Note that this vulnerability only affects devices with the
wiphy->mbssid_max_interfaces member set for the wireless physical device
struct in the device driver, and can only be triggered by a process with
CAP_NET_ADMIN capabilities.

Fix this by checking for a maximum of 255 elements in attrs.

Cc: stable@vger.kernel.org
Fixes: dc1e3cb8da8b ("nl80211: MBSSID and EMA support in AP mode")
Signed-off-by: Keith Yeo <keithyjy@gmail.com>
Link: https://lore.kernel.org/r/20230731034719.77206-1-keithyjy@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: SEV: only access GHCB fields once

commit 7588dbcebcbf0193ab5b76987396d0254270b04a upstream.

A KVM guest using SEV-ES or SEV-SNP with multiple vCPUs can trigger
a double fetch race condition vulnerability and invoke the VMGEXIT
handler recursively.

sev_handle_vmgexit() maps the GHCB page using kvm_vcpu_map() and then
fetches the exit code using ghcb_get_sw_exit_code(). Soon after,
sev_es_validate_vmgexit() fetches the exit code again. Since the GHCB
page is shared with the guest, the guest is able to quickly swap the
values with another vCPU and hence bypass the validation. One vmexit code
that can be rejected by sev_es_validate_vmgexit() is SVM_EXIT_VMGEXIT;
if sev_handle_vmgexit() observes it in the second fetch, the call
to svm_invoke_exit_handler() will invoke sev_handle_vmgexit() again
recursively.

To avoid the race, always fetch the GHCB data from the places where
sev_es_sync_from_ghcb stores it.

Exploiting recursions on linux kernel has been proven feasible
in the past, but the impact is mitigated by stack guard pages
(CONFIG_VMAP_STACK). Still, if an attacker manages to call the handler
multiple times, they can theoretically trigger a stack overflow and
cause a denial-of-service, or potentially guest-to-host escape in kernel
configurations without stack guard pages.

Note that winning the race reliably in every iteration is very tricky
due to the very tight window of the fetches; depending on the compiler
settings, they are often consecutive because of optimization and inlining.

Tested by booting an SEV-ES RHEL9 guest.

Fixes: CVE-2023-4155
Fixes: 291bd20d5d88 ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT")
Cc: stable@vger.kernel.org
Reported-by: Andy Nguyen <theflow@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: SEV: snapshot the GHCB before accessing it

commit 4e15a0ddc3ff40e8ea84032213976ecf774d7f77 upstream.

Validation of the GHCB is susceptible to time-of-check/time-of-use vulnerabilities.
To avoid them, we would like to always snapshot the fields that are read in
sev_es_validate_vmgexit(), and not use the GHCB anymore after it returns.

This means:

- invoking sev_es_sync_from_ghcb() before any GHCB access, including before
sev_es_validate_vmgexit()

- snapshotting all fields including the valid bitmap and the sw_scratch field,
which are currently not caching anywhere.

The valid bitmap is the first thing to be copied out of the GHCB; then,
further accesses will use the copy in svm->sev_es.

Fixes: 291bd20d5d88 ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: fix wrong next length validation of ea buffer in smb2_set_ea()

commit 79ed288cef201f1f212dfb934bcaac75572fb8f6 upstream.

There are multiple smb2_ea_info buffers in FILE_FULL_EA_INFORMATION request
from client. ksmbd find next smb2_ea_info using ->NextEntryOffset of
current smb2_ea_info. ksmbd need to validate buffer length Before
accessing the next ea. ksmbd should check buffer length using buf_len,
not next variable. next is the start offset of current ea that got from
previous ea.

Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21598
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: validate command request size

commit 5aa4fda5aa9c2a5a7bac67b4a12b089ab81fee3c upstream.

In commit 2b9b8f3b68ed ("ksmbd: validate command payload size"), except
for SMB2_OPLOCK_BREAK_HE command, the request size of other commands
is not checked, it's not expected. Fix it by add check for request
size of other commands.

Cc: stable@vger.kernel.org
Fixes: 2b9b8f3b68ed ("ksmbd: validate command payload size")
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Long Li <leo.lilong@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: Add a helper for checking hwrng enabled

commit cacc6e22932f373a91d7be55a9b992dc77f4c59b upstream.

The same checks are repeated in three places to decide whether to use
hwrng. Consolidate these into a helper.

Also this fixes a case that one of them was missing a check in the
cleanup path.

Fixes: 554b841d4703 ("tpm: Disable RNG for all AMD fTPMs")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: Disable RNG for all AMD fTPMs

commit 554b841d470338a3b1d6335b14ee1cd0c8f5d754 upstream.

The TPM RNG functionality is not necessary for entropy when the CPU
already supports the RDRAND instruction. The TPM RNG functionality
was previously disabled on a subset of AMD fTPM series, but reports
continue to show problems on some systems causing stutter root caused
to TPM RNG functionality.

Expand disabling TPM RNG use for all AMD fTPMs whether they have versions
that claim to have fixed or not. To accomplish this, move the detection
into part of the TPM CRB registration and add a flag indicating that
the TPM should opt-out of registration to hwrng.

Cc: stable@vger.kernel.org # 6.1.y+
Fixes: b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources")
Fixes: f1324bbc4011 ("tpm: disable hwrng for fTPM on some AMD designs")
Reported-by: daniil.stas@posteo.net
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217719
Reported-by: bitlord0xff@gmail.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217212
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "loongarch/cpu: Switch to arch_cpu_finalize_init()"

This reverts commit 08e86d42e2c916e362d124e3bc6c824eb1862498 which is
commit 9841c423164787feb8f1442f922b7d80a70c82f1 upstream.

As Gunter reports:
Building loongarch:defconfig ... failed
--------------
Error log:
<stdin>:569:2: warning: #warning syscall fstat not implemented [-Wcpp]
arch/loongarch/kernel/setup.c: In function 'arch_cpu_finalize_init':
arch/loongarch/kernel/setup.c:86:9: error: implicit declaration of function 'alternative_instructions'

Actually introduced in v6.1.44 with commit 08e86d42e2c9 ("loongarch/cpu:
Switch to arch_cpu_finalize_init()"). Alternative instruction support
was only introduced for loongarch in v6.2 with commit 19e5eb15b00c
("LoongArch: Add alternative runtime patching mechanism").

So revert it from 6.1.y.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/fcd7b764-9047-22ba-a040-41b6ff99959c@roeck-us.net
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gcc-plugins: Reorganize gimple includes for GCC 13

commit e6a71160cc145e18ab45195abf89884112e02dfb upstream.

The gimple-iterator.h header must be included before gimple-fold.h
starting with GCC 13. Reorganize gimple headers to work for all GCC
versions.

Reported-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/all/20230113173033.4380-1-palmer@rivosinc.com/
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 6.1.45

Link: https://lore.kernel.org/r/20230809103636.615294317@linuxfoundation.org
Tested-by: Miguel Ojeda <ojeda@kernel.org> # Rust
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/CPU/AMD: Do not leak quotient data after a division by 0

commit 77245f1c3c6495521f6a3af082696ee2f8ce3921 upstream.

Under certain circumstances, an integer division by 0 which faults, can
leave stale quotient data from a previous division operation on Zen1
microarchitectures.

Do a dummy division 0/1 before returning from the #DE exception handler
in order to avoid any leaks of potentially sensitive data.

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "drm/i915: Disable DC states for all commits"

This reverts commit 0fc6fea41c7122aa5f2088117f50144b507e13d7 which is
commit a2b6e99d8a623544f3bdccd28ee35b9c1b00daa5 upstream.

It is reported to cause regression issues, so it should be reverted from
the 6.1.y tree for now.

Reported-by: Thorsten Leemhuis <regressions@leemhuis.info>
Link: https://lore.kernel.org/r/f0870e8f-0c66-57fd-f95d-18d014a11939@leemhuis.info
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8419
Cc: Manasi Navare <navaremanasi@google.com>
Cc: Drew Davenport <ddavenport@chromium.org>
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Use apt name for FW reserved region

commit db3b5cb64a9ca301d14ed027e470834316720e42 upstream

Use the generic term fw_reserved_memory for FW reserve region. This
region may also hold discovery TMR in addition to other reserve
regions. This region size could be larger than discovery tmr size, hence
don't change the discovery tmr size based on this.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[ This change fixes reading IP discovery from debugfs.
  It needed to be hand modified because:
  * GC 9.4.3 support isn't introduced in older kernels until
    228ce176434b ("drm/amdgpu: Handle VRAM dependencies on GFXIP9.4.3")
  * It also changed because of 58ab2c08d708 (drm/amdgpu: use VRAM|GTT
    for a bunch of kernel allocations) not being present.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2748
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Remove unnecessary domain argument

commit 3273f11675ef11959d25a56df3279f712bcd41b7 upstream

Remove the "domain" argument to amdgpu_bo_create_kernel_at() since this
function takes an "offset" argument which is the offset off of VRAM, and as
such allocation always takes place in VRAM. Thus, the "domain" argument is
unnecessary.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: AMD Graphics <amd-gfx@lists.freedesktop.org>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: add vram reservation based on vram_usagebyfirmware_v2_2

commit 4864f2ee9ee2acf4a1009b58fbc62f17fa086d4e upstream

Move TMR region from top of FB to 2MB for FFBM, so we need to
reserve TMR region firstly to make sure TMR can be allocated at 2MB

Signed-off-by: Tong Liu01 <Tong.Liu01@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64/ptrace: Don't enable SVE when setting streaming SVE

commit 045aecdfcb2e060db142d83a0f4082380c465d2c upstream.

Systems which implement SME without also implementing SVE are
architecturally valid but were not initially supported by the kernel,
unfortunately we missed one issue in the ptrace code.

The SVE register setting code is shared between SVE and streaming mode
SVE. When we set full SVE register state we currently enable TIF_SVE
unconditionally, in the case where streaming SVE is being configured on a
system that supports vanilla SVE this is not an issue since we always
initialise enough state for both vector lengths but on a system which only
support SME it will result in us attempting to restore the SVE vector
length after having set streaming SVE registers.

Fix this by making the enabling of SVE conditional on setting SVE vector
state. If we set streaming SVE state and SVE was not already enabled this
will result in a SVE access trap on next use of normal SVE, this will cause
us to flush our register state but this is fine since the only way to
trigger a SVE access trap would be to exit streaming mode which will cause
the in register state to be flushed anyway.

Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-ssve-no-sve-v1-1-49df214bfb3e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[Fix up backport -- broonie]
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exfat: check if filename entries exceeds max filename length

[ Upstream commit d42334578eba1390859012ebb91e1e556d51db49 ]

exfat_extract_uni_name copies characters from a given file name entry into
the 'uniname' variable. This variable is actually defined on the stack of
the exfat_readdir() function. According to the definition of
the 'exfat_uni_name' type, the file name should be limited 255 characters
(+ null teminator space), but the exfat_get_uniname_from_ext_entry()
function can write more characters because there is no check if filename
entries exceeds max filename length. This patch add the check not to copy
filename characters when exceeding max filename length.

Cc: stable@vger.kernel.org
Cc: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reported-by: Maxim Suhanov <dfirblog@gmail.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: don't reset unchangable mount option in f2fs_remount()

[ Upstream commit 458c15dfbce62c35fefd9ca637b20a051309c9f1 ]

syzbot reports a bug as below:

general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] PREEMPT SMP KASAN
RIP: 0010:__lock_acquire+0x69/0x2000 kernel/locking/lockdep.c:4942
Call Trace:
lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5691
__raw_write_lock include/linux/rwlock_api_smp.h:209 [inline]
_raw_write_lock+0x2e/0x40 kernel/locking/spinlock.c:300
__drop_extent_tree+0x3ac/0x660 fs/f2fs/extent_cache.c:1100
f2fs_drop_extent_tree+0x17/0x30 fs/f2fs/extent_cache.c:1116
f2fs_insert_range+0x2d5/0x3c0 fs/f2fs/file.c:1664
f2fs_fallocate+0x4e4/0x6d0 fs/f2fs/file.c:1838
vfs_fallocate+0x54b/0x6b0 fs/open.c:324
ksys_fallocate fs/open.c:347 [inline]
__do_sys_fallocate fs/open.c:355 [inline]
__se_sys_fallocate fs/open.c:353 [inline]
__x64_sys_fallocate+0xbd/0x100 fs/open.c:353
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

The root cause is race condition as below:
- since it tries to remount rw filesystem, so that do_remount won't
call sb_prepare_remount_readonly to block fallocate, there may be race
condition in between remount and fallocate.
- in f2fs_remount(), default_options() will reset mount option to default
one, and then update it based on result of parse_options(), so there is
a hole which race condition can happen.

Thread A Thread B
- f2fs_fill_super
- parse_options
  - clear_opt(READ_EXTENT_CACHE)

- f2fs_remount
- default_options
  - set_opt(READ_EXTENT_CACHE)
- f2fs_fallocate
- f2fs_insert_range
  - f2fs_drop_extent_tree
   - __drop_extent_tree
    - __may_extent_tree
     - test_opt(READ_EXTENT_CACHE) return true
    - write_lock(&et->lock) access NULL pointer
- parse_options
  - clear_opt(READ_EXTENT_CACHE)

Cc: <stable@vger.kernel.org>
Reported-by: syzbot+d015b6c2fbb5c383bf08@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/20230522124203.3838360-1-chao@kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to set flush_merge opt and show noflush_merge

[ Upstream commit 967eaad1fed5f6335ea97a47d45214744dc57925 ]

Some minor modifications to flush_merge and related parameters:

  1.The FLUSH_MERGE opt is set by default only in non-ro mode.
  2.When ro and merge are set at the same time, an error is reported.
  3.Display noflush_merge mount opt.

Suggested-by: Chao Yu <chao@kernel.org>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: 458c15dfbce6 ("f2fs: don't reset unchangable mount option in f2fs_remount()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/rseq: Play nice with binaries statically linked against glibc 2.35+

[ Upstream commit 3bcbc20942db5d738221cca31a928efc09827069 ]

To allow running rseq and KVM's rseq selftests as statically linked
binaries, initialize the various "trampoline" pointers to point directly
at the expect glibc symbols, and skip the dlysm() lookups if the rseq
size is non-zero, i.e. the binary is statically linked *and* the libc
registered its own rseq.

Define weak versions of the symbols so as not to break linking against
libc versions that don't support rseq in any capacity.

The KVM selftests in particular are often statically linked so that they
can be run on targets with very limited runtime environments, i.e. test
machines.

Fixes: 233e667e1ae3 ("selftests/rseq: Uplift rseq selftests for compatibility with glibc-2.35")
Cc: Aaron Lewis <aaronlewis@google.com>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230721223352.2333911-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: skip CLEAR_PAYLOAD_ID_TABLE if device mst_en is 0

commit a1c9a1e27022d13c70a14c4faeab6ce293ad043b upstream.

[Why]
Some dock and mst monitor don't like to receive CLEAR_PAYLOAD_ID_TABLE
when mst_en is set to 0. It doesn't make sense to do so in source
side, either.

[How]
Don't send CLEAR_PAYLOAD_ID_TABLE if mst_en is 0

Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[ 6.1.y doesn't have the file rename from
54618888d1ea7 ("drm/amd/display: break down dc_link.c") ]
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Ensure that planes are in the same order

commit bb46a6a9bab134b9d15043ea8fa9d6c276e938b8 upstream.

The function dc_update_planes_and_stream handles multiple cases where DC
needs to remove and add planes in the commit tail phase. After Linux
started to use this function, some of the IGT kms_plane started to fail;
one good example to illustrate why the new sequence regressed IGT is the
subtest plane-position-hole which has the following diagram as a
template:

+--------------------+        +-----------------------+
| +-----+            |        | +-----+               |
| |     |            |        | | +-----+             |
| |  +--+            | ==>    | | |   | |             |
| |__|               |        | +-|---+ |             |
|                    |        |   +-----+             |
|                    |        |                       |
+--------------------+        +-----------------------+
   (a) Final image                (b) Composed image

IGT expects image (a) as the final result of two plane compositions as
described in figure (b). After the migration to the new sequence, the
last plane order is changed, and DC generates the following image:

+---------------------+
| +-----+             |
| |     |             |
| |     |             |
| +-----+             |
|                     |
+---------------------+

Notice that the generated image by DC is different because the small
square that should be composed on top of the primary plane is below the
primary plane. For this reason, the CRC will mismatch with the expected
value. Since the function dc_add_all_planes_for_stream re-append all the
new planes back to the dc_validation_set, this commit ensures that the
original sequence is maintained. After this change, all CI tests in all
ASICs start to pass again.

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Suggested-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/imx/ipuv3: Fix front porch adjustment upon hactive aligning

[ Upstream commit ee31742bf17636da1304af77b2cb1c29b5dda642 ]

When hactive is not aligned to 8 pixels, it is aligned accordingly and
hfront porch needs to be reduced the same amount. Unfortunately the front
porch is set to the difference rather than reducing it. There are some
Samsung TVs which can't cope with a front porch of instead of 70.

Fixes: 94dfec48fca7 ("drm/imx: Add 8 pixel alignment fix")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20230515072137.116211-1-alexander.stein@ew.tq-group.com
[p.zabel@pengutronix.de: Fixed subject]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515072137.116211-1-alexander.stein@ew.tq-group.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/mm/altmap: Fix altmap boundary check

[ Upstream commit 6722b25712054c0f903b839b8f5088438dd04df3 ]

altmap->free includes the entire free space from which altmap blocks
can be allocated. So when checking whether the kernel is doing altmap
block free, compute the boundary correctly, otherwise memory hotunplug
can fail.

Fixes: 9ef34630a461 ("powerpc/mm: Fallback to RAM if the altmap is unusable")
Signed-off-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230724181320.471386-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: fsl_upm: Fix an off-by one test in fun_exec_op()

[ Upstream commit c6abce60338aa2080973cd95be0aedad528bb41f ]

'op-cs' is copied in 'fun->mchip_number' which is used to access the
'mchip_offsets' and the 'rnb_gpio' arrays.
These arrays have NAND_MAX_CHIPS elements, so the index must be below this
limit.

Fix the sanity check in order to avoid the NAND_MAX_CHIPS value. This
would lead to out-of-bound accesses.

Fixes: 54309d657767 ("mtd: rawnand: fsl_upm: Implement exec_op()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/cd01cba1c7eda58bdabaae174c78c067325803d2.1689803636.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: rockchip: Align hwecc vs. raw page helper layouts

[ Upstream commit ea690ad78dd611e3906df5b948a516000b05c1cb ]

Currently, read/write_page_hwecc() and read/write_page_raw() are not
aligned: there is a mismatch in the OOB bytes which are not
read/written at the same offset in both cases (raw vs. hwecc).

This is a real problem when relying on the presence of the Page
Addresses (PA) when using the NAND chip as a boot device, as the
BootROM expects additional data in the OOB area at specific locations.

Rockchip boot blocks are written per 4 x 512 byte sectors per page.
Each page with boot blocks must have a page address (PA) pointer in OOB
to the next page. Pages are written in a pattern depending on the NAND chip ID.

Generate boot block page address and pattern for hwecc in user space
and copy PA data to/from the already reserved last 4 bytes before ECC
in the chip->oob_poi data layout.

Align the different helpers. This change breaks existing jffs2 users.

Fixes: 058e0e847d54 ("mtd: rawnand: rockchip: NFC driver for RK3308, RK2928 and others")
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/5e782c08-862b-51ae-47ff-3299940928ca@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: rockchip: fix oobfree offset and description

[ Upstream commit d0ca3b92b7a6f42841ea9da8492aaf649db79780 ]

Rockchip boot blocks are written per 4 x 512 byte sectors per page.
Each page with boot blocks must have a page address (PA) pointer in OOB
to the next page.

The currently advertised free OOB area starts at offset 6, like
if 4 PA bytes were located right after the BBM. This is wrong as the
PA bytes are located right before the ECC bytes.

Fix the layout by allowing access to all bytes between the BBM and the
PA bytes instead of reserving 4 bytes right after the BBM.

This change breaks existing jffs2 users.

Fixes: 058e0e847d54 ("mtd: rawnand: rockchip: NFC driver for RK3308, RK2928 and others")
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/d202f12d-188c-20e8-f2c2-9cc874ad4d22@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: omap_elm: Fix incorrect type in assignment

[ Upstream commit d8403b9eeee66d5dd81ecb9445800b108c267ce3 ]

Once the ECC word endianness is converted to BE32, we force cast it
to u32 so we can use elm_write_reg() which in turn uses writel().

Fixes below sparse warnings:

   drivers/mtd/nand/raw/omap_elm.c:180:37: sparse:     expected unsigned int [usertype] val
   drivers/mtd/nand/raw/omap_elm.c:180:37: sparse:     got restricted __be32 [usertype]
   drivers/mtd/nand/raw/omap_elm.c:185:37: sparse:     expected unsigned int [usertype] val
   drivers/mtd/nand/raw/omap_elm.c:185:37: sparse:     got restricted __be32 [usertype]
   drivers/mtd/nand/raw/omap_elm.c:190:37: sparse:     expected unsigned int [usertype] val
   drivers/mtd/nand/raw/omap_elm.c:190:37: sparse:     got restricted __be32 [usertype]
>> drivers/mtd/nand/raw/omap_elm.c:200:40: sparse: sparse: restricted __be32 degrades to integer
   drivers/mtd/nand/raw/omap_elm.c:206:39: sparse: sparse: restricted __be32 degrades to integer
   drivers/mtd/nand/raw/omap_elm.c:210:37: sparse:     expected unsigned int [assigned] [usertype] val
   drivers/mtd/nand/raw/omap_elm.c:210:37: sparse:     got restricted __be32 [usertype]
   drivers/mtd/nand/raw/omap_elm.c:213:37: sparse:     expected unsigned int [assigned] [usertype] val
   drivers/mtd/nand/raw/omap_elm.c:213:37: sparse:     got restricted __be32 [usertype]
   drivers/mtd/nand/raw/omap_elm.c:216:37: sparse:     expected unsigned int [assigned] [usertype] val
   drivers/mtd/nand/raw/omap_elm.c:216:37: sparse:     got restricted __be32 [usertype]
   drivers/mtd/nand/raw/omap_elm.c:219:37: sparse:     expected unsigned int [assigned] [usertype] val
   drivers/mtd/nand/raw/omap_elm.c:219:37: sparse:     got restricted __be32 [usertype]
   drivers/mtd/nand/raw/omap_elm.c:222:37: sparse:     expected unsigned int [assigned] [usertype] val
   drivers/mtd/nand/raw/omap_elm.c:222:37: sparse:     got restricted __be32 [usertype]
   drivers/mtd/nand/raw/omap_elm.c:225:37: sparse:     expected unsigned int [assigned] [usertype] val
   drivers/mtd/nand/raw/omap_elm.c:225:37: sparse:     got restricted __be32 [usertype]
   drivers/mtd/nand/raw/omap_elm.c:228:39: sparse: sparse: restricted __be32 degrades to integer

Fixes: bf22433575ef ("mtd: devices: elm: Add support for ELM error correction")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306212211.WDXokuWh-lkp@intel.com/
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230624184021.7740-1-rogerq@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: annotate offset timeout races

commit 5498bf28d8f2bd63a46ad40f4427518615fb793f upstream.

It's racy to read ->cached_cq_tail without taking proper measures
(usually grabbing ->completion_lock) as timeout requests with CQE
offsets do, however they have never had a good semantics for from
when they start counting. Annotate racy reads with data_race().

Reported-by: syzbot+cb265db2f3f3468ef436@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4de3685e185832a92a572df2be2c735d2e21a83d.1684506056.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix to do sanity check on direct node in truncate_dnode()

commit a6ec83786ab9f13f25fb18166dee908845713a95 upstream.

syzbot reports below bug:

BUG: KASAN: slab-use-after-free in f2fs_truncate_data_blocks_range+0x122a/0x14c0 fs/f2fs/file.c:574
Read of size 4 at addr ffff88802a25c000 by task syz-executor148/5000

CPU: 1 PID: 5000 Comm: syz-executor148 Not tainted 6.4.0-rc7-syzkaller-00041-ge660abd551f1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:351
print_report mm/kasan/report.c:462 [inline]
kasan_report+0x11c/0x130 mm/kasan/report.c:572
f2fs_truncate_data_blocks_range+0x122a/0x14c0 fs/f2fs/file.c:574
truncate_dnode+0x229/0x2e0 fs/f2fs/node.c:944
f2fs_truncate_inode_blocks+0x64b/0xde0 fs/f2fs/node.c:1154
f2fs_do_truncate_blocks+0x4ac/0xf30 fs/f2fs/file.c:721
f2fs_truncate_blocks+0x7b/0x300 fs/f2fs/file.c:749
f2fs_truncate.part.0+0x4a5/0x630 fs/f2fs/file.c:799
f2fs_truncate include/linux/fs.h:825 [inline]
f2fs_setattr+0x1738/0x2090 fs/f2fs/file.c:1006
notify_change+0xb2c/0x1180 fs/attr.c:483
do_truncate+0x143/0x200 fs/open.c:66
handle_truncate fs/namei.c:3295 [inline]
do_open fs/namei.c:3640 [inline]
path_openat+0x2083/0x2750 fs/namei.c:3791
do_filp_open+0x1ba/0x410 fs/namei.c:3818
do_sys_openat2+0x16d/0x4c0 fs/open.c:1356
do_sys_open fs/open.c:1372 [inline]
__do_sys_creat fs/open.c:1448 [inline]
__se_sys_creat fs/open.c:1442 [inline]
__x64_sys_creat+0xcd/0x120 fs/open.c:1442
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

The root cause is, inodeA references inodeB via inodeB's ino, once inodeA
is truncated, it calls truncate_dnode() to truncate data blocks in inodeB's
node page, it traverse mapping data from node->i.i_addr[0] to
node->i.i_addr[ADDRS_PER_BLOCK() - 1], result in out-of-boundary access.

This patch fixes to add sanity check on dnode page in truncate_dnode(),
so that, it can help to avoid triggering such issue, and once it encounters
such issue, it will record newly introduced ERROR_INVALID_NODE_REFERENCE
error into superblock, later fsck can detect such issue and try repairing.

Also, it removes f2fs_truncate_data_blocks() for cleanup due to the
function has only one caller, and uses f2fs_truncate_data_blocks_range()
instead.

Reported-and-tested-by: syzbot+12cb4425b22169b52036@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/000000000000f3038a05fef867f8@google.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: remove BUG_ON()'s in add_new_free_space()

commit d8ccbd21918fd7fa6ce3226cffc22c444228e8ad upstream.

At add_new_free_space() we have these BUG_ON()'s that are there to deal
with any failure to add free space to the in memory free space cache.
Such failures are mostly -ENOMEM that should be very rare. However there's
no need to have these BUG_ON()'s, we can just return any error to the
caller and all callers and their upper call chain are already dealing with
errors.

So just make add_new_free_space() return any errors, while removing the
BUG_ON()'s, and returning the total amount of added free space to an
optional u64 pointer argument.

Reported-by: syzbot+3ba856e07b7127889d8c@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/000000000000e9cb8305ff4e8327@google.com/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext2: Drop fragment support

commit 404615d7f1dcd4cca200e9a7a9df3a1dcae1dd62 upstream.

Ext2 has fields in superblock reserved for subblock allocation support.
However that never landed. Drop the many years dead code.

Reported-by: syzbot+af5e10f73dbff48f70af@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: Protect reconfiguration of sb read-write from racing writes

commit c541dce86c537714b6761a79a969c1623dfa222b upstream.

The reconfigure / remount code takes a lot of effort to protect
filesystem's reconfiguration code from racing writes on remounting
read-only. However during remounting read-only filesystem to read-write
mode userspace writes can start immediately once we clear SB_RDONLY
flag. This is inconvenient for example for ext4 because we need to do
some writes to the filesystem (such as preparation of quota files)
before we can take userspace writes so we are clearing SB_RDONLY flag
before we are fully ready to accept userpace writes and syzbot has found
a way to exploit this [1]. Also as far as I'm reading the code
the filesystem remount code was protected from racing writes in the
legacy mount path by the mount's MNT_READONLY flag so this is relatively
new problem. It is actually fairly easy to protect remount read-write
from racing writes using sb->s_readonly_remount flag so let's just do
that instead of having to workaround these races in the filesystem code.

[1] https://lore.kernel.org/all/00000000000006a0df05f6667499@google.com/T/

Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230615113848.8439-1-jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: usbnet: Fix WARNING in usbnet_start_xmit/usb_submit_urb

commit 5e1627cb43ddf1b24b92eb26f8d958a3f5676ccb upstream.

The syzbot fuzzer identified a problem in the usbnet driver:

usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 0 PID: 754 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
Modules linked in:
CPU: 0 PID: 754 Comm: kworker/0:2 Not tainted 6.4.0-rc7-syzkaller-00014-g692b7dc87ca6 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
Workqueue: mld mld_ifc_work
RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
Code: 7c 24 18 e8 2c b4 5b fb 48 8b 7c 24 18 e8 42 07 f0 fe 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 a0 c9 fc 8a e8 5a 6f 23 fb <0f> 0b e9 58 f8 ff ff e8 fe b3 5b fb 48 81 c5 c0 05 00 00 e9 84 f7
RSP: 0018:ffffc9000463f568 EFLAGS: 00010086
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
RDX: ffff88801eb28000 RSI: ffffffff814c03b7 RDI: 0000000000000001
RBP: ffff8881443b7190 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000003
R13: ffff88802a77cb18 R14: 0000000000000003 R15: ffff888018262500
FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000556a99c15a18 CR3: 0000000028c71000 CR4: 0000000000350ef0
Call Trace:
<TASK>
usbnet_start_xmit+0xfe5/0x2190 drivers/net/usb/usbnet.c:1453
__netdev_start_xmit include/linux/netdevice.h:4918 [inline]
netdev_start_xmit include/linux/netdevice.h:4932 [inline]
xmit_one net/core/dev.c:3578 [inline]
dev_hard_start_xmit+0x187/0x700 net/core/dev.c:3594
...

This bug is caused by the fact that usbnet trusts the bulk endpoint
addresses its probe routine receives in the driver_info structure, and
it does not check to see that these endpoints actually exist and have
the expected type and directions.

The fix is simply to add such a check.

Reported-and-tested-by: syzbot+63ee658b9a100ffadbe2@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/000000000000a56e9105d0cec021@google.com/
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/ea152b6d-44df-4f8a-95c6-4db51143dcc1@rowland.harvard.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

debugobjects: Recheck debug_objects_enabled before reporting

commit 8b64d420fe2450f82848178506d3e3a0bd195539 upstream.

syzbot is reporting false a positive ODEBUG message immediately after
ODEBUG was disabled due to OOM.

  [ 1062.309646][T22911] ODEBUG: Out of memory. ODEBUG disabled
  [ 1062.886755][ T5171] ------------[ cut here ]------------
  [ 1062.892770][ T5171] ODEBUG: assert_init not available (active state 0) object: ffffc900056afb20 object type: timer_list hint: process_timeout+0x0/0x40

  CPU 0 [ T5171]                CPU 1 [T22911]
  --------------                --------------
  debug_object_assert_init() {
    if (!debug_objects_enabled)
      return;
    db = get_bucket(addr);
                                lookup_object_or_alloc() {
                                  debug_objects_enabled = 0;
                                  return NULL;
                                }
                                debug_objects_oom() {
                                  pr_warn("Out of memory. ODEBUG disabled\n");
                                  // all buckets get emptied here, and
                                }
    lookup_object_or_alloc(addr, db, descr, false, true) {
      // this bucket is already empty.
      return ERR_PTR(-ENOENT);
    }
    // Emits false positive warning.
    debug_print_object(&o, "assert_init");
  }

Recheck debug_object_enabled in debug_print_object() to avoid that.

Reported-by: syzbot <syzbot+7937ba6a50bdd00fffdf@syzkaller.appspotmail.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/492fe2ae-5141-d548-ebd5-62f5fe2e57f7@I-love.SAKURA.ne.jp
Closes: https://syzkaller.appspot.com/bug?extid=7937ba6a50bdd00fffdf
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: L2CAP: Fix use-after-free in l2cap_sock_ready_cb

commit 1728137b33c00d5a2b5110ed7aafb42e7c32e4a1 upstream.

l2cap_sock_release(sk) frees sk. However, sk's children are still alive
and point to the already free'd sk's address.
To fix this, l2cap_sock_release(sk) also cleans sk's children.

==================================================================
BUG: KASAN: use-after-free in l2cap_sock_ready_cb+0xb7/0x100 net/bluetooth/l2cap_sock.c:1650
Read of size 8 at addr ffff888104617aa8 by task kworker/u3:0/276

CPU: 0 PID: 276 Comm: kworker/u3:0 Not tainted 6.2.0-00001-gef397bd4d5fb-dirty #59
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: hci2 hci_rx_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x72/0x95 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:306 [inline]
print_report+0x175/0x478 mm/kasan/report.c:417
kasan_report+0xb1/0x130 mm/kasan/report.c:517
l2cap_sock_ready_cb+0xb7/0x100 net/bluetooth/l2cap_sock.c:1650
l2cap_chan_ready+0x10e/0x1e0 net/bluetooth/l2cap_core.c:1386
l2cap_config_req+0x753/0x9f0 net/bluetooth/l2cap_core.c:4480
l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:5739 [inline]
l2cap_sig_channel net/bluetooth/l2cap_core.c:6509 [inline]
l2cap_recv_frame+0xe2e/0x43c0 net/bluetooth/l2cap_core.c:7788
l2cap_recv_acldata+0x6ed/0x7e0 net/bluetooth/l2cap_core.c:8506
hci_acldata_packet net/bluetooth/hci_core.c:3813 [inline]
hci_rx_work+0x66e/0xbc0 net/bluetooth/hci_core.c:4048
process_one_work+0x4ea/0x8e0 kernel/workqueue.c:2289
worker_thread+0x364/0x8e0 kernel/workqueue.c:2436
kthread+0x1b9/0x200 kernel/kthread.c:376
ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308
</TASK>

Allocated by task 288:
kasan_save_stack+0x22/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
____kasan_kmalloc mm/kasan/common.c:374 [inline]
__kasan_kmalloc+0x82/0x90 mm/kasan/common.c:383
kasan_kmalloc include/linux/kasan.h:211 [inline]
__do_kmalloc_node mm/slab_common.c:968 [inline]
__kmalloc+0x5a/0x140 mm/slab_common.c:981
kmalloc include/linux/slab.h:584 [inline]
sk_prot_alloc+0x113/0x1f0 net/core/sock.c:2040
sk_alloc+0x36/0x3c0 net/core/sock.c:2093
l2cap_sock_alloc.constprop.0+0x39/0x1c0 net/bluetooth/l2cap_sock.c:1852
l2cap_sock_create+0x10d/0x220 net/bluetooth/l2cap_sock.c:1898
bt_sock_create+0x183/0x290 net/bluetooth/af_bluetooth.c:132
__sock_create+0x226/0x380 net/socket.c:1518
sock_create net/socket.c:1569 [inline]
__sys_socket_create net/socket.c:1606 [inline]
__sys_socket_create net/socket.c:1591 [inline]
__sys_socket+0x112/0x200 net/socket.c:1639
__do_sys_socket net/socket.c:1652 [inline]
__se_sys_socket net/socket.c:1650 [inline]
__x64_sys_socket+0x40/0x50 net/socket.c:1650
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3f/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc

Freed by task 288:
kasan_save_stack+0x22/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
kasan_save_free_info+0x2e/0x50 mm/kasan/generic.c:523
____kasan_slab_free mm/kasan/common.c:236 [inline]
____kasan_slab_free mm/kasan/common.c:200 [inline]
__kasan_slab_free+0x10a/0x190 mm/kasan/common.c:244
kasan_slab_free include/linux/kasan.h:177 [inline]
slab_free_hook mm/slub.c:1781 [inline]
slab_free_freelist_hook mm/slub.c:1807 [inline]
slab_free mm/slub.c:3787 [inline]
__kmem_cache_free+0x88/0x1f0 mm/slub.c:3800
sk_prot_free net/core/sock.c:2076 [inline]
__sk_destruct+0x347/0x430 net/core/sock.c:2168
sk_destruct+0x9c/0xb0 net/core/sock.c:2183
__sk_free+0x82/0x220 net/core/sock.c:2194
sk_free+0x7c/0xa0 net/core/sock.c:2205
sock_put include/net/sock.h:1991 [inline]
l2cap_sock_kill+0x256/0x2b0 net/bluetooth/l2cap_sock.c:1257
l2cap_sock_release+0x1a7/0x220 net/bluetooth/l2cap_sock.c:1428
__sock_release+0x80/0x150 net/socket.c:650
sock_close+0x19/0x30 net/socket.c:1368
__fput+0x17a/0x5c0 fs/file_table.c:320
task_work_run+0x132/0x1c0 kernel/task_work.c:179
resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
exit_to_user_mode_prepare+0x113/0x120 kernel/entry/common.c:203
__syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
syscall_exit_to_user_mode+0x21/0x50 kernel/entry/common.c:296
do_syscall_64+0x4c/0x90 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x72/0xdc

The buggy address belongs to the object at ffff888104617800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 680 bytes inside of
1024-byte region [ffff888104617800, ffff888104617c00)

The buggy address belongs to the physical page:
page:00000000dbca6a80 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888104614000 pfn:0x104614
head:00000000dbca6a80 order:2 compound_mapcount:0 subpages_mapcount:0 compound_pincount:0
flags: 0x200000000010200(slab|head|node=0|zone=2)
raw: 0200000000010200 ffff888100041dc0 ffffea0004212c10 ffffea0004234b10
raw: ffff888104614000 0000000000080002 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff888104617980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888104617a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888104617a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888104617b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888104617b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Ack: This bug is found by FuzzBT with a modified Syzkaller. Other
contributors are Ruoyu Wu and Hui Peng.
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/sysv: Null check to prevent null-ptr-deref bug

commit ea2b62f305893992156a798f665847e0663c9f41 upstream.

sb_getblk(inode->i_sb, parent) return a null ptr and taking lock on
that leads to the null-ptr-deref bug.

Reported-by: syzbot+aad58150cbc64ba41bdc@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=aad58150cbc64ba41bdc
Signed-off-by: Prince Kumar Maurya <princekumarmaurya06@gmail.com>
Message-Id: <20230531013141.19487-1-princekumarmaurya06@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/ntfs3: Use __GFP_NOWARN allocation at ntfs_load_attr_list()

commit ea303f72d70ce2f0b0aa94ab127085289768c5a6 upstream.

syzbot is reporting too large allocation at ntfs_load_attr_list(), for
a crafted filesystem can have huge data_size.

Reported-by: syzbot <syzbot+89dbb3a789a5b9711793@syzkaller.appspotmail.com>
Link: https://syzkaller.appspot.com/bug?extid=89dbb3a789a5b9711793
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: kmem: fix a NULL pointer dereference in obj_stock_flush_required()

commit 3b8abb3239530c423c0b97e42af7f7e856e1ee96 upstream.

KCSAN found an issue in obj_stock_flush_required():
stock->cached_objcg can be reset between the check and dereference:

==================================================================
BUG: KCSAN: data-race in drain_all_stock / drain_obj_stock

write to 0xffff888237c2a2f8 of 8 bytes by task 19625 on cpu 0:
drain_obj_stock+0x408/0x4e0 mm/memcontrol.c:3306
refill_obj_stock+0x9c/0x1e0 mm/memcontrol.c:3340
obj_cgroup_uncharge+0xe/0x10 mm/memcontrol.c:3408
memcg_slab_free_hook mm/slab.h:587 [inline]
__cache_free mm/slab.c:3373 [inline]
__do_kmem_cache_free mm/slab.c:3577 [inline]
kmem_cache_free+0x105/0x280 mm/slab.c:3602
__d_free fs/dcache.c:298 [inline]
dentry_free fs/dcache.c:375 [inline]
__dentry_kill+0x422/0x4a0 fs/dcache.c:621
dentry_kill+0x8d/0x1e0
dput+0x118/0x1f0 fs/dcache.c:913
__fput+0x3bf/0x570 fs/file_table.c:329
____fput+0x15/0x20 fs/file_table.c:349
task_work_run+0x123/0x160 kernel/task_work.c:179
resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
exit_to_user_mode_loop+0xcf/0xe0 kernel/entry/common.c:171
exit_to_user_mode_prepare+0x6a/0xa0 kernel/entry/common.c:203
__syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
syscall_exit_to_user_mode+0x26/0x140 kernel/entry/common.c:296
do_syscall_64+0x4d/0xc0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x63/0xcd

read to 0xffff888237c2a2f8 of 8 bytes by task 19632 on cpu 1:
obj_stock_flush_required mm/memcontrol.c:3319 [inline]
drain_all_stock+0x174/0x2a0 mm/memcontrol.c:2361
try_charge_memcg+0x6d0/0xd10 mm/memcontrol.c:2703
try_charge mm/memcontrol.c:2837 [inline]
mem_cgroup_charge_skmem+0x51/0x140 mm/memcontrol.c:7290
sock_reserve_memory+0xb1/0x390 net/core/sock.c:1025
sk_setsockopt+0x800/0x1e70 net/core/sock.c:1525
udp_lib_setsockopt+0x99/0x6c0 net/ipv4/udp.c:2692
udp_setsockopt+0x73/0xa0 net/ipv4/udp.c:2817
sock_common_setsockopt+0x61/0x70 net/core/sock.c:3668
__sys_setsockopt+0x1c3/0x230 net/socket.c:2271
__do_sys_setsockopt net/socket.c:2282 [inline]
__se_sys_setsockopt net/socket.c:2279 [inline]
__x64_sys_setsockopt+0x66/0x80 net/socket.c:2279
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0xffff8881382d52c0 -> 0xffff888138893740

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 19632 Comm: syz-executor.0 Not tainted 6.3.0-rc2-syzkaller-00387-g534293368afa #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023

Fix it by using READ_ONCE()/WRITE_ONCE() for all accesses to
stock->cached_objcg.

Link: https://lkml.kernel.org/r/20230502160839.361544-1-roman.gushchin@linux.dev
Fixes: bf4f059954dc ("mm: memcg/slab: obj_cgroup API")
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Reported-by: syzbot+774c29891415ab0fd29d@syzkaller.appspotmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/linux-mm/CACT4Y+ZfucZhM60YPphWiCLJr6+SGFhT+jjm8k1P-a_8Kkxsjg@mail.gmail.com/T/#t
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

file: reinstate f_pos locking optimization for regular files

commit 797964253d358cf8d705614dda394dbe30120223 upstream.

In commit 20ea1e7d13c1 ("file: always lock position for
FMODE_ATOMIC_POS") we ended up always taking the file pos lock, because
pidfd_getfd() could get a reference to the file even when it didn't have
an elevated file count due to threading of other sharing cases.

But Mateusz Guzik reports that the extra locking is actually measurable,
so let's re-introduce the optimization, and only force the locking for
directory traversal.

Directories need the lock for correctness reasons, while regular files
only need it for "POSIX semantics". Since pidfd_getfd() is about
debuggers etc special things that are _way_ outside of POSIX, we can
relax the rules for that case.

Reported-by: Mateusz Guzik <mjguzik@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/linux-fsdevel/20230803095311.ijpvhx3fyrbkasul@f/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf, cpumap: Make sure kthread is running before map update returns

commit 640a604585aa30f93e39b17d4d6ba69fcb1e66c9 upstream.

The following warning was reported when running stress-mode enabled
xdp_redirect_cpu with some RT threads:

  ------------[ cut here ]------------
  WARNING: CPU: 4 PID: 65 at kernel/bpf/cpumap.c:135
  CPU: 4 PID: 65 Comm: kworker/4:1 Not tainted 6.5.0-rc2+ #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
  Workqueue: events cpu_map_kthread_stop
  RIP: 0010:put_cpu_map_entry+0xda/0x220
  ......
  Call Trace:
   <TASK>
   ? show_regs+0x65/0x70
   ? __warn+0xa5/0x240
   ......
   ? put_cpu_map_entry+0xda/0x220
   cpu_map_kthread_stop+0x41/0x60
   process_one_work+0x6b0/0xb80
   worker_thread+0x96/0x720
   kthread+0x1a5/0x1f0
   ret_from_fork+0x3a/0x70
   ret_from_fork_asm+0x1b/0x30
   </TASK>

The root cause is the same as commit 436901649731 ("bpf: cpumap: Fix memory
leak in cpu_map_update_elem"). The kthread is stopped prematurely by
kthread_stop() in cpu_map_kthread_stop(), and kthread() doesn't call
cpu_map_kthread_run() at all but XDP program has already queued some
frames or skbs into ptr_ring. So when __cpu_map_ring_cleanup() checks
the ptr_ring, it will find it was not emptied and report a warning.

An alternative fix is to use __cpu_map_ring_cleanup() to drop these
pending frames or skbs when kthread_stop() returns -EINTR, but it may
confuse the user, because these frames or skbs have been handled
correctly by XDP program. So instead of dropping these frames or skbs,
just make sure the per-cpu kthread is running before
__cpu_map_entry_alloc() returns.

After apply the fix, the error handle for kthread_stop() will be
unnecessary because it will always return 0, so just remove it.

Fixes: 6710e1126934 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20230729095107.1722450-2-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: imx93: Propagate correct error in imx93_clocks_probe()

commit a29b2fccf5f2689a9637be85ff1f51c834c6fb33 upstream.

smatch reports:

drivers/clk/imx/clk-imx93.c:294 imx93_clocks_probe() error: uninitialized symbol 'base'.

Indeed, in case of an error, the wrong (yet uninitialized) variable is
converted to an error code and returned.
Fix this by propagating the error code in the correct variable.

Fixes: e02ba11b45764705 ("clk: imx93: fix memory leak and missing unwind goto in imx93_clocks_probe")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/9c2acd81-3ad8-485d-819e-9e4201277831@kadam.mountain
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/all/202306161533.4YDmL22b-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230711150812.3562221-1-geert+renesas@glider.be
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/gt: Cleanup aux invalidation registers

commit d14560ac1b595aa2e792365e91fea6aeaee66c2b upstream.

Fix the 'NV' definition postfix that is supposed to be INV.

Take the chance to also order properly the registers based on
their address and call the GEN12_GFX_CCS_AUX_INV address as
GEN12_CCS_AUX_INV like all the other similar registers.

Remove also VD1, VD3 and VE1 registers that don't exist and add
BCS0 and CCS0.

Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230725001950.1014671-2-andi.shyti@linux.intel.com
(cherry picked from commit 2f0b927d3ca3440445975ebde27f3df1c3ed6f76)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Fix premature release of request's reusable memory

commit a337b64f0d5717248a0c894e2618e658e6a9de9f upstream.

Infinite waits for completion of GPU activity have been observed in CI,
mostly inside __i915_active_wait(), triggered by igt@gem_barrier_race or
igt@perf@stress-open-close.  Root cause analysis, based of ftrace dumps
generated with a lot of extra trace_printk() calls added to the code,
revealed loops of request dependencies being accidentally built,
preventing the requests from being processed, each waiting for completion
of another one's activity.

After we substitute a new request for a last active one tracked on a
timeline, we set up a dependency of our new request to wait on completion
of current activity of that previous one.  While doing that, we must take
care of keeping the old request still in memory until we use its
attributes for setting up that await dependency, or we can happen to set
up the await dependency on an unrelated request that already reuses the
memory previously allocated to the old one, already released.  Combined
with perf adding consecutive kernel context remote requests to different
user context timelines, unresolvable loops of await dependencies can be
built, leading do infinite waits.

We obtain a pointer to the previous request to wait upon when we
substitute it with a pointer to our new request in an active tracker,
e.g. in intel_timeline.last_request.  In some processing paths we protect
that old request from being freed before we use it by getting a reference
to it under RCU protection, but in others, e.g.  __i915_request_commit()
-> __i915_request_add_to_timeline() -> __i915_request_ensure_ordering(),
we don't.  But anyway, since the requests' memory is SLAB_FAILSAFE_BY_RCU,
that RCU protection is not sufficient against reuse of memory.

We could protect i915_request's memory from being prematurely reused by
calling its release function via call_rcu() and using rcu_read_lock()
consequently, as proposed in v1.  However, that approach leads to
significant (up to 10 times) increase of SLAB utilization by i915_request
SLAB cache.  Another potential approach is to take a reference to the
previous active fence.

When updating an active fence tracker, we first lock the new fence,
substitute a pointer of the current active fence with the new one, then we
lock the substituted fence.  With this approach, there is a time window
after the substitution and before the lock when the request can be
concurrently released by an interrupt handler and its memory reused, then
we may happen to lock and return a new, unrelated request.

Always get a reference to the current active fence first, before
replacing it with a new one.  Having it protected from premature release
and reuse, lock it and then replace with the new one but only if not
yet signalled via a potential concurrent interrupt nor replaced with
another one by a potential concurrent thread, otherwise retry, starting
from getting a reference to the new current one.  Adjust users to not
get a reference to the previous active fence themselves and always put the
reference got by __i915_active_fence_set() when no longer needed.

v3: Fix lockdep splat reports and other issues caused by incorrect use of
    try_cmpxchg() (use (cmpxchg() != prev) instead)
v2: Protect request's memory by getting a reference to it in favor of
    delegating its release to call_rcu() (Chris)

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8211
Fixes: df9f85d8582e ("drm/i915: Serialise i915_active_fence_set() with itself")
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.6+
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230720093543.832147-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 946e047a3d88d46d15b5c5af0414098e12b243f7)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ttm: check null pointer before accessing when swapping

commit 2dedcf414bb01b8d966eb445db1d181d92304fb2 upstream.

Add a check to avoid null pointer dereference as below:

[   90.002283] general protection fault, probably for non-canonical
address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
[   90.002292] KASAN: null-ptr-deref in range
[0x0000000000000000-0x0000000000000007]
[   90.002346]  ? exc_general_protection+0x159/0x240
[   90.002352]  ? asm_exc_general_protection+0x26/0x30
[   90.002357]  ? ttm_bo_evict_swapout_allowable+0x322/0x5e0 [ttm]
[   90.002365]  ? ttm_bo_evict_swapout_allowable+0x42e/0x5e0 [ttm]
[   90.002373]  ttm_bo_swapout+0x134/0x7f0 [ttm]
[   90.002383]  ? __pfx_ttm_bo_swapout+0x10/0x10 [ttm]
[   90.002391]  ? lock_acquire+0x44d/0x4f0
[   90.002398]  ? ttm_device_swapout+0xa5/0x260 [ttm]
[   90.002412]  ? lock_acquired+0x355/0xa00
[   90.002416]  ? do_raw_spin_trylock+0xb6/0x190
[   90.002421]  ? __pfx_lock_acquired+0x10/0x10
[   90.002426]  ? ttm_global_swapout+0x25/0x210 [ttm]
[   90.002442]  ttm_device_swapout+0x198/0x260 [ttm]
[   90.002456]  ? __pfx_ttm_device_swapout+0x10/0x10 [ttm]
[   90.002472]  ttm_global_swapout+0x75/0x210 [ttm]
[   90.002486]  ttm_tt_populate+0x187/0x3f0 [ttm]
[   90.002501]  ttm_bo_handle_move_mem+0x437/0x590 [ttm]
[   90.002517]  ttm_bo_validate+0x275/0x430 [ttm]
[   90.002530]  ? __pfx_ttm_bo_validate+0x10/0x10 [ttm]
[   90.002544]  ? kasan_save_stack+0x33/0x60
[   90.002550]  ? kasan_set_track+0x25/0x30
[   90.002554]  ? __kasan_kmalloc+0x8f/0xa0
[   90.002558]  ? amdgpu_gtt_mgr_new+0x81/0x420 [amdgpu]
[   90.003023]  ? ttm_resource_alloc+0xf6/0x220 [ttm]
[   90.003038]  amdgpu_bo_pin_restricted+0x2dd/0x8b0 [amdgpu]
[   90.003210]  ? __x64_sys_ioctl+0x131/0x1a0
[   90.003210]  ? do_syscall_64+0x60/0x90

Fixes: a2848d08742c ("drm/ttm: never consider pinned BOs for eviction&swap")
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20230724024229.1118444-1-guchun.chen@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

open: make RESOLVE_CACHED correctly test for O_TMPFILE

commit a0fc452a5d7fed986205539259df1d60546f536c upstream.

O_TMPFILE is actually __O_TMPFILE|O_DIRECTORY. This means that the old
fast-path check for RESOLVE_CACHED would reject all users passing
O_DIRECTORY with -EAGAIN, when in fact the intended test was to check
for __O_TMPFILE.

Cc: stable@vger.kernel.org # v5.12+
Fixes: 99668f618062 ("fs: expose LOOKUP_CACHED through openat2() RESOLVE_CACHED")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Message-Id: <20230806-resolve_cached-o_tmpfile-v1-1-7ba16308465e@cyphar.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64/fpsimd: Sync FPSIMD state with SVE for SME only systems

commit 507ea5dd92d23fcf10e4d1a68a443c86a49753ed upstream.

Currently we guard FPSIMD/SVE state conversions with a check for the system
supporting SVE but SME only systems may need to sync streaming mode SVE
state so add a check for SME support too. These functions are only used
by the ptrace code.

Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-ssve-no-sve-v1-2-49df214bfb3e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64/fpsimd: Clear SME state in the target task when setting the VL

commit c9bb40b7f786662e33d71afe236442b0b61f0446 upstream.

When setting SME vector lengths we clear TIF_SME to reenable SME traps,
doing a reallocation of the backing storage on next use. We do this using
clear_thread_flag() which operates on the current thread, meaning that when
setting the vector length via ptrace we may both not force traps for the
target task and force a spurious flush of any SME state that the tracing
task may have.

Clear the flag in the target task.

Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers")
Reported-by: David Spickett <David.Spickett@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-tif-sme-v1-1-88312fd6fbfd@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64/fpsimd: Sync and zero pad FPSIMD state for streaming SVE

commit 69af56ae56a48a2522aad906c4461c6c7c092737 upstream.

We have a function sve_sync_from_fpsimd_zeropad() which is used by the
ptrace code to update the SVE state when the user writes to the the
FPSIMD register set. Currently this checks that the task has SVE
enabled but this will miss updates for tasks which have streaming SVE
enabled if SVE has not been enabled for the thread, also do the
conversion if the task has streaming SVE enabled.

Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-ssve-no-sve-v1-3-49df214bfb3e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/ftrace: Create a dummy stackframe to fix stack unwind

commit 41a506ef71eb38d94fe133f565c87c3e06ccc072 upstream.

With ppc64 -mprofile-kernel and ppc32 -pg, profiling instructions to
call into ftrace are emitted right at function entry. The instruction
sequence used is minimal to reduce overhead. Crucially, a stackframe is
not created for the function being traced. This breaks stack unwinding
since the function being traced does not have a stackframe for itself.
As such, it never shows up in the backtrace:

/sys/kernel/debug/tracing # echo 1 > /proc/sys/kernel/stack_tracer_enabled
/sys/kernel/debug/tracing # cat stack_trace
        Depth    Size   Location    (17 entries)
        -----    ----   --------
  0)     4144      32   ftrace_call+0x4/0x44
  1)     4112     432   get_page_from_freelist+0x26c/0x1ad0
  2)     3680     496   __alloc_pages+0x290/0x1280
  3)     3184     336   __folio_alloc+0x34/0x90
  4)     2848     176   vma_alloc_folio+0xd8/0x540
  5)     2672     272   __handle_mm_fault+0x700/0x1cc0
  6)     2400     208   handle_mm_fault+0xf0/0x3f0
  7)     2192      80   ___do_page_fault+0x3e4/0xbe0
  8)     2112     160   do_page_fault+0x30/0xc0
  9)     1952     256   data_access_common_virt+0x210/0x220
10)     1696     400   0xc00000000f16b100
11)     1296     384   load_elf_binary+0x804/0x1b80
12)      912     208   bprm_execve+0x2d8/0x7e0
13)      704      64   do_execveat_common+0x1d0/0x2f0
14)      640     160   sys_execve+0x54/0x70
15)      480      64   system_call_exception+0x138/0x350
16)      416     416   system_call_common+0x160/0x2c4

Fix this by having ftrace create a dummy stackframe for the function
being traced. With this, backtraces now capture the function being
traced:

/sys/kernel/debug/tracing # cat stack_trace
        Depth    Size   Location    (17 entries)
        -----    ----   --------
  0)     3888      32   _raw_spin_trylock+0x8/0x70
  1)     3856     576   get_page_from_freelist+0x26c/0x1ad0
  2)     3280      64   __alloc_pages+0x290/0x1280
  3)     3216     336   __folio_alloc+0x34/0x90
  4)     2880     176   vma_alloc_folio+0xd8/0x540
  5)     2704     416   __handle_mm_fault+0x700/0x1cc0
  6)     2288      96   handle_mm_fault+0xf0/0x3f0
  7)     2192      48   ___do_page_fault+0x3e4/0xbe0
  8)     2144     192   do_page_fault+0x30/0xc0
  9)     1952     608   data_access_common_virt+0x210/0x220
10)     1344      16   0xc0000000334bbb50
11)     1328     416   load_elf_binary+0x804/0x1b80
12)      912      64   bprm_execve+0x2d8/0x7e0
13)      848     176   do_execveat_common+0x1d0/0x2f0
14)      672     192   sys_execve+0x54/0x70
15)      480      64   system_call_exception+0x138/0x350
16)      416     416   system_call_common+0x160/0x2c4

This results in two additional stores in the ftrace entry code, but
produces reliable backtraces.

Fixes: 153086644fd1 ("powerpc/ftrace: Add support for -mprofile-kernel ftrace ABI")
Cc: stable@vger.kernel.org
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230621051349.759567-1-naveen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Disable preemption in bpf_event_output

commit d62cc390c2e99ae267ffe4b8d7e2e08b6c758c32 upstream.

We received report [1] of kernel crash, which is caused by
using nesting protection without disabled preemption.

The bpf_event_output can be called by programs executed by
bpf_prog_run_array_cg function that disabled migration but
keeps preemption enabled.

This can cause task to be preempted by another one inside the
nesting protection and lead eventually to two tasks using same
perf_sample_data buffer and cause crashes like:

  BUG: kernel NULL pointer dereference, address: 0000000000000001
  #PF: supervisor instruction fetch in kernel mode
  #PF: error_code(0x0010) - not-present page
  ...
  ? perf_output_sample+0x12a/0x9a0
  ? finish_task_switch.isra.0+0x81/0x280
  ? perf_event_output+0x66/0xa0
  ? bpf_event_output+0x13a/0x190
  ? bpf_event_output_data+0x22/0x40
  ? bpf_prog_dfc84bbde731b257_cil_sock4_connect+0x40a/0xacb
  ? xa_load+0x87/0xe0
  ? __cgroup_bpf_run_filter_sock_addr+0xc1/0x1a0
  ? release_sock+0x3e/0x90
  ? sk_setsockopt+0x1a1/0x12f0
  ? udp_pre_connect+0x36/0x50
  ? inet_dgram_connect+0x93/0xa0
  ? __sys_connect+0xb4/0xe0
  ? udp_setsockopt+0x27/0x40
  ? __pfx_udp_push_pending_frames+0x10/0x10
  ? __sys_setsockopt+0xdf/0x1a0
  ? __x64_sys_connect+0xf/0x20
  ? do_syscall_64+0x3a/0x90
  ? entry_SYSCALL_64_after_hwframe+0x72/0xdc

Fixing this by disabling preemption in bpf_event_output.

[1] https://github.com/cilium/cilium/issues/26756
Cc: stable@vger.kernel.org
Reported-by: Oleg "livelace" Popov <o.popov@livelace.ru>
Closes: https://github.com/cilium/cilium/issues/26756
Fixes: 2a916f2f546c ("bpf: Use migrate_disable/enable in array macros and cgroup/lirc code.")
Acked-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230725084206.580930-3-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rbd: prevent busy loop when requesting exclusive lock

commit 9d01e07fd1bfb4daae156ab528aa196f5ac2b2bc upstream.

Due to rbd_try_acquire_lock() effectively swallowing all but
EBLOCKLISTED error from rbd_try_lock() ("request lock anyway") and
rbd_request_lock() returning ETIMEDOUT error not only for an actual
notify timeout but also when the lock owner doesn't respond, a busy
loop inside of rbd_acquire_lock() between rbd_try_acquire_lock() and
rbd_request_lock() is possible.

Requesting the lock on EBUSY error (returned by get_lock_owner_info()
if an incompatible lock or invalid lock owner is detected) makes very
little sense. The same goes for ETIMEDOUT error (might pop up pretty
much anywhere if osd_request_timeout option is set) and many others.

Just fail I/O requests on rbd_dev->acquiring_list immediately on any
error from rbd_try_lock().

Cc: stable@vger.kernel.org # 588159009d5b: rbd: retrieve and check lock owner twice before blocklisting
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/hyperv: Disable IBT when hypercall page lacks ENDBR instruction

commit d5ace2a776442d80674eff9ed42e737f7dd95056 upstream.

On hardware that supports Indirect Branch Tracking (IBT), Hyper-V VMs
with ConfigVersion 9.3 or later support IBT in the guest. However,
current versions of Hyper-V have a bug in that there's not an ENDBR64
instruction at the beginning of the hypercall page. Since hypercalls are
made with an indirect call to the hypercall page, all hypercall attempts
fail with an exception and Linux panics.

A Hyper-V fix is in progress to add ENDBR64. But guard against the Linux
panic by clearing X86_FEATURE_IBT if the hypercall page doesn't start
with ENDBR. The VM will boot and run without IBT.

If future Linux 32-bit kernels were to support IBT, additional hypercall
page hackery would be needed to make IBT work for such kernels in a
Hyper-V VM.

Cc: stable@vger.kernel.org
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1690001476-98594-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: mt76: mt7615: do not advertise 5 GHz on first phy of MT7615D (DBDC)

commit 421033deb91521aa6a9255e495cb106741a52275 upstream.

On DBDC devices the first (internal) phy is only capable of using
2.4 GHz band, and the 5 GHz band is exposed via a separate phy object,
so avoid the false advertising.

Reported-by: Rani Hod <rani.hod@gmail.com>
Closes: https://github.com/openwrt/openwrt/pull/12361
Fixes: 7660a1bd0c22 ("mt76: mt7615: register ext_phy if DBDC is detected")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230605073408.8699-1-fercerpav@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: tap_open(): set sk_uid from current_fsuid()

commit 5c9241f3ceab3257abe2923a59950db0dc8bb737 upstream.

Commit 66b2c338adce initializes the "sk_uid" field in the protocol socket
(struct sock) from the "/dev/tapX" device node's owner UID. Per original
commit 86741ec25462 ("net: core: Add a UID field to struct sock.",
2016-11-04), that's wrong: the idea is to cache the UID of the userspace
process that creates the socket. Commit 86741ec25462 mentions socket() and
accept(); with "tap", the action that creates the socket is
open("/dev/tapX").

Therefore the device node's owner UID is irrelevant. In most cases,
"/dev/tapX" will be owned by root, so in practice, commit 66b2c338adce has
no observable effect:

- before, "sk_uid" would be zero, due to undefined behavior
(CVE-2023-1076),

- after, "sk_uid" would be zero, due to "/dev/tapX" being owned by root.

What matters is the (fs)UID of the process performing the open(), so cache
that in "sk_uid".

Cc: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pietro Borrello <borrello@diag.uniroma1.it>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 66b2c338adce ("tap: tap_open(): correctly initialize socket uid")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2173435
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: tun_chr_open(): set sk_uid from current_fsuid()

commit 9bc3047374d5bec163e83e743709e23753376f0c upstream.

Commit a096ccca6e50 initializes the "sk_uid" field in the protocol socket
(struct sock) from the "/dev/net/tun" device node's owner UID. Per
original commit 86741ec25462 ("net: core: Add a UID field to struct
sock.", 2016-11-04), that's wrong: the idea is to cache the UID of the
userspace process that creates the socket. Commit 86741ec25462 mentions
socket() and accept(); with "tun", the action that creates the socket is
open("/dev/net/tun").

Therefore the device node's owner UID is irrelevant. In most cases,
"/dev/net/tun" will be owned by root, so in practice, commit a096ccca6e50
has no observable effect:

- before, "sk_uid" would be zero, due to undefined behavior
(CVE-2023-1076),

- after, "sk_uid" would be zero, due to "/dev/net/tun" being owned by root.

What matters is the (fs)UID of the process performing the open(), so cache
that in "sk_uid".

Cc: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pietro Borrello <borrello@diag.uniroma1.it>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: a096ccca6e50 ("tun: tun_chr_open(): correctly initialize socket uid")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2173435
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: stratix10: fix incorrect I2C property for SCL signal

commit db66795f61354c373ecdadbdae1ed253a96c47cb upstream.

The correct dts property for the SCL falling time is
"i2c-scl-falling-time-ns".

Fixes: c8da1d15b8a4 ("arm64: dts: stratix10: i2c clock running out of spec")
Cc: stable@vger.kernel.org
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Disable preemption in bpf_perf_event_output

commit f2c67a3e60d1071b65848efaa8c3b66c363dd025 upstream.

The nesting protection in bpf_perf_event_output relies on disabled
preemption, which is guaranteed for kprobes and tracepoints.

However bpf_perf_event_output can be also called from uprobes context
through bpf_prog_run_array_sleepable function which disables migration,
but keeps preemption enabled.

This can cause task to be preempted by another one inside the nesting
protection and lead eventually to two tasks using same perf_sample_data
buffer and cause crashes like:

  kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
  BUG: unable to handle page fault for address: ffffffff82be3eea
  ...
  Call Trace:
   ? __die+0x1f/0x70
   ? page_fault_oops+0x176/0x4d0
   ? exc_page_fault+0x132/0x230
   ? asm_exc_page_fault+0x22/0x30
   ? perf_output_sample+0x12b/0x910
   ? perf_event_output+0xd0/0x1d0
   ? bpf_perf_event_output+0x162/0x1d0
   ? bpf_prog_c6271286d9a4c938_krava1+0x76/0x87
   ? __uprobe_perf_func+0x12b/0x540
   ? uprobe_dispatcher+0x2c4/0x430
   ? uprobe_notify_resume+0x2da/0xce0
   ? atomic_notifier_call_chain+0x7b/0x110
   ? exit_to_user_mode_prepare+0x13e/0x290
   ? irqentry_exit_to_user_mode+0x5/0x30
   ? asm_exc_int3+0x35/0x40

Fixing this by disabling preemption in bpf_perf_event_output.

Cc: stable@vger.kernel.org
Fixes: 8c7dcb84e3b7 ("bpf: implement sleepable uprobes by chaining gps")
Acked-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230725084206.580930-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: meson: fix OOB available bytes for ECC

commit 7e6b04f9238eab0f684fafd158c1f32ea65b9eaa upstream.

It is incorrect to calculate number of OOB bytes for ECC engine using
some "already known" ECC step size (1024 bytes here). Number of such
bytes for ECC engine must be whole OOB except 2 bytes for bad block
marker, while proper ECC step size and strength will be selected by
ECC logic.

Fixes: 8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230705065211.293500-1-AVKrasnov@sberdevices.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: spinand: toshiba: Fix ecc_get_status

commit 8544cda94dae6be3f1359539079c68bb731428b1 upstream.

Reading ECC status is failing.

tx58cxgxsxraix_ecc_get_status() is using on-stack buffer
for SPINAND_GET_FEATURE_OP() output. It is not suitable
for DMA needs of spi-mem.

Fix this by using the spi-mem operations dedicated buffer
spinand->scratchbuf.

See
spinand->scratchbuf:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/mtd/spinand.h?h=v6.3#n418
spi_mem_check_op():
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/spi/spi-mem.c?h=v6.3#n199

Fixes: 10949af1681d ("mtd: spinand: Add initial support for Toshiba TC58CVG2S0H")
Cc: stable@vger.kernel.org
Signed-off-by: Olivier Maignial <olivier.maignial@hotmail.fr>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/DB4P250MB1032553D05FBE36DEE0D311EFE23A@DB4P250MB1032.EURP250.PROD.OUTLOOK.COM
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>