Andreas Ziegler [Tue, 15 Mar 2016 21:55:33 +0000 (14:55 -0700)]
mm: fix two typos in comments for to_vmem_altmap()
Commit
4b94ffdc4163 ("x86, mm: introduce vmem_altmap to augment
vmemmap_populate()"), introduced the to_vmem_altmap() function.
The comments in this function contain two typos (one misspelling of the
Kconfig option CONFIG_SPARSEMEM_VMEMMAP, and one missing letter 'n'),
let's fix them up.
Signed-off-by: Andreas Ziegler <andreas.ziegler@fau.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christian Borntraeger [Tue, 15 Mar 2016 21:55:30 +0000 (14:55 -0700)]
mm/debug_pagealloc: ask users for default setting of debug_pagealloc
Since commit
031bc5743f158 ("mm/debug-pagealloc: make debug-pagealloc
boottime configurable") CONFIG_DEBUG_PAGEALLOC is by default not adding
any page debugging.
This resulted in several unnoticed bugs, e.g.
https://lkml.kernel.org/g/<
569F5E29.3090107@de.ibm.com>
or
https://lkml.kernel.org/g/<
56A20F30.4050705@de.ibm.com>
as this behaviour change was not even documented in Kconfig.
Let's provide a new Kconfig symbol that allows to change the default
back to enabled, e.g. for debug kernels. This also makes the change
obvious to kernel packagers.
Let's also change the Kconfig description for CONFIG_DEBUG_PAGEALLOC, to
indicate that there are two stages of overhead.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Ryabinin [Tue, 15 Mar 2016 21:55:27 +0000 (14:55 -0700)]
mm/page-writeback: fix dirty_ratelimit calculation
Calculation of dirty_ratelimit sometimes is not correct. E.g. initial
values of dirty_ratelimit == INIT_BW and step == 0, lead to the
following result:
UBSAN: Undefined behaviour in ../mm/page-writeback.c:1286:7
shift exponent 25600 is too large for 64-bit type 'long unsigned int'
The fix is straightforward - make step 0 if the shift exponent is too
big.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Tue, 15 Mar 2016 21:55:25 +0000 (14:55 -0700)]
mm/page_alloc.c: rework code layout in memmap_init_zone()
This function is getting full of weird tricks to avoid word-wrapping.
Use a goto to eliminate a tab stop then use the new space
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Taku Izumi [Tue, 15 Mar 2016 21:55:22 +0000 (14:55 -0700)]
mm/page_alloc.c: introduce kernelcore=mirror option
This patch extends existing "kernelcore" option and introduces
kernelcore=mirror option. By specifying "mirror" instead of specifying
the amount of memory, non-mirrored (non-reliable) region will be
arranged into ZONE_MOVABLE.
[akpm@linux-foundation.org: fix build with CONFIG_HAVE_MEMBLOCK_NODE_MAP=n]
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Taku Izumi [Tue, 15 Mar 2016 21:55:18 +0000 (14:55 -0700)]
mm/page_alloc.c: calculate zone_start_pfn at zone_spanned_pages_in_node()
Xeon E7 v3 based systems supports Address Range Mirroring and UEFI BIOS
complied with UEFI spec 2.5 can notify which ranges are mirrored
(reliable) via EFI memory map. Now Linux kernel utilize its information
and allocates boot time memory from reliable region.
My requirement is:
- allocate kernel memory from mirrored region
- allocate user memory from non-mirrored region
In order to meet my requirement, ZONE_MOVABLE is useful. By arranging
non-mirrored range into ZONE_MOVABLE, mirrored memory is used for kernel
allocations.
My idea is to extend existing "kernelcore" option and introduces
kernelcore=mirror option. By specifying "mirror" instead of specifying
the amount of memory, non-mirrored region will be arranged into
ZONE_MOVABLE.
Earlier discussions are at:
https://lkml.org/lkml/2015/10/9/24
https://lkml.org/lkml/2015/10/15/9
https://lkml.org/lkml/2015/11/27/18
https://lkml.org/lkml/2015/12/8/836
For example, suppose 2-nodes system with the following memory range:
node 0 [mem 0x0000000000001000-0x000000109fffffff]
node 1 [mem 0x00000010a0000000-0x000000209fffffff]
and the following ranges are marked as reliable (mirrored):
[0x0000000000000000-0x0000000100000000]
[0x0000000100000000-0x0000000180000000]
[0x0000000800000000-0x0000000880000000]
[0x00000010a0000000-0x0000001120000000]
[0x00000017a0000000-0x0000001820000000]
If you specify kernelcore=mirror, ZONE_NORMAL and ZONE_MOVABLE are
arranged like bellow:
- node 0:
ZONE_NORMAL : [0x0000000100000000-0x00000010a0000000]
ZONE_MOVABLE: [0x0000000180000000-0x00000010a0000000]
- node 1:
ZONE_NORMAL : [0x00000010a0000000-0x00000020a0000000]
ZONE_MOVABLE: [0x0000001120000000-0x00000020a0000000]
In overlapped range, pages to be ZONE_MOVABLE in ZONE_NORMAL are treated
as absent pages, and vice versa.
This patch (of 2):
Currently each zone's zone_start_pfn is calculated at
free_area_init_core(). However zone's range is fixed at the time when
invoking zone_spanned_pages_in_node().
This patch changes how each zone->zone_start_pfn is calculated in
zone_spanned_pages_in_node().
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Tue, 15 Mar 2016 21:55:15 +0000 (14:55 -0700)]
fs/mpage.c:mpage_readpages(): use lru_to_page() helper
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Tue, 15 Mar 2016 21:55:12 +0000 (14:55 -0700)]
mm/slub: support left redzone
SLUB already has a redzone debugging feature. But it is only positioned
at the end of object (aka right redzone) so it cannot catch left oob.
Although current object's right redzone acts as left redzone of next
object, first object in a slab cannot take advantage of this effect.
This patch explicitly adds a left red zone to each object to detect left
oob more precisely.
Background:
Someone complained to me that left OOB doesn't catch even if KASAN is
enabled which does page allocation debugging. That page is out of our
control so it would be allocated when left OOB happens and, in this
case, we can't find OOB. Moreover, SLUB debugging feature can be
enabled without page allocator debugging and, in this case, we will miss
that OOB.
Before trying to implement, I expected that changes would be too
complex, but, it doesn't look that complex to me now. Almost changes
are applied to debug specific functions so I feel okay.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Laura Abbott [Tue, 15 Mar 2016 21:55:09 +0000 (14:55 -0700)]
slub: relax CMPXCHG consistency restrictions
When debug options are enabled, cmpxchg on the page is disabled. This
is because the page must be locked to ensure there are no false
positives when performing consistency checks. Some debug options such
as poisoning and red zoning only act on the object itself. There is no
need to protect other CPUs from modification on only the object. Allow
cmpxchg to happen with poisoning and red zoning are set on a slab.
Credit to Mathias Krause for the original work which inspired this
series
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Laura Abbott [Tue, 15 Mar 2016 21:55:06 +0000 (14:55 -0700)]
slub: convert SLAB_DEBUG_FREE to SLAB_CONSISTENCY_CHECKS
SLAB_DEBUG_FREE allows expensive consistency checks at free to be turned
on or off. Expand its use to be able to turn off all consistency
checks. This gives a nice speed up if you only want features such as
poisoning or tracing.
Credit to Mathias Krause for the original work which inspired this
series
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Laura Abbott [Tue, 15 Mar 2016 21:55:02 +0000 (14:55 -0700)]
slub: fix/clean free_debug_processing return paths
Since commit
19c7ff9ecd89 ("slub: Take node lock during object free
checks") check_object has been incorrectly returning success as it
follows the out label which just returns the node.
Thanks to refactoring, the out and fail paths are now basically the
same. Combine the two into one and just use a single label.
Credit to Mathias Krause for the original work which inspired this
series
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Laura Abbott [Tue, 15 Mar 2016 21:54:59 +0000 (14:54 -0700)]
slub: drop lock at the end of free_debug_processing
This series takes the suggestion of Christoph Lameter and only focuses
on optimizing the slow path where the debug processing runs. The two
main optimizations in this series are letting the consistency checks be
skipped and relaxing the cmpxchg restrictions when we are not doing
consistency checks. With hackbench -g 20 -l 1000 averaged over 100
runs:
Before slub_debug=P
mean 15.607
variance .086
stdev .294
After slub_debug=P
mean 10.836
variance .155
stdev .394
This still isn't as fast as what is in grsecurity unfortunately so there's
still work to be done. Profiling ___slab_alloc shows that 25-50% of time
is spent in deactivate_slab. I haven't looked too closely to see if this
is something that can be optimized. My plan for now is to focus on
getting all of this merged (if appropriate) before digging in to another
task.
This patch (of 4):
Currently, free_debug_processing has a comment "Keep node_lock to preserve
integrity until the object is actually freed". In actuallity, the lock is
dropped immediately in __slab_free. Rather than wait until __slab_free
and potentially throw off the unlikely marking, just drop the lock in
__slab_free. This also lets free_debug_processing take its own copy of
the spinlock flags rather than trying to share the ones from __slab_free.
Since there is no use for the node afterwards, change the return type of
free_debug_processing to return an int like alloc_debug_processing.
Credit to Mathias Krause for the original work which inspired this series
[akpm@linux-foundation.org: fix build]
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Tue, 15 Mar 2016 21:54:56 +0000 (14:54 -0700)]
mm/slab: re-implement pfmemalloc support
Current implementation of pfmemalloc handling in SLAB has some problems.
1) pfmemalloc_active is set to true when there is just one or more
pfmemalloc slabs in the system, but it is cleared when there is no
pfmemalloc slab in one arbitrary kmem_cache. So, pfmemalloc_active
could be wrongly cleared.
2) Search to partial and free list doesn't happen when non-pfmemalloc
object are not found in cpu cache. Instead, allocating new slab
happens and it is not optimal.
3) Even after sk_memalloc_socks() is disabled, cpu cache would keep
pfmemalloc objects tagged with SLAB_OBJ_PFMEMALLOC. It isn't cleared
if sk_memalloc_socks() is disabled so it could cause problem.
4) If cpu cache is filled with pfmemalloc objects, it would cause slow
down non-pfmemalloc allocation.
To me, current pointer tagging approach looks complex and fragile so this
patch re-implement whole thing instead of fixing problems one by one.
Design principle for new implementation is that
1) Don't disrupt non-pfmemalloc allocation in fast path even if
sk_memalloc_socks() is enabled. It's more likely case than pfmemalloc
allocation.
2) Ensure that pfmemalloc slab is used only for pfmemalloc allocation.
3) Don't consider performance of pfmemalloc allocation in memory
deficiency state.
As a result, all pfmemalloc alloc/free in memory tight state will be
handled in slow-path. If there is non-pfmemalloc free object, it will be
returned first even for pfmemalloc user in fast-path so that performance
of pfmemalloc user isn't affected in normal case and pfmemalloc objects
will be kept as long as possible.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Tested-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Tue, 15 Mar 2016 21:54:53 +0000 (14:54 -0700)]
mm/slab: avoid returning values by reference
Returing values by reference is bad practice. Instead, just use
function return value.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Suggested-by: Christoph Lameter <cl@linux.com>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Tue, 15 Mar 2016 21:54:50 +0000 (14:54 -0700)]
mm/slab: introduce new slab management type, OBJFREELIST_SLAB
SLAB needs an array to manage freed objects in a slab. It is only used
if some objects are freed so we can use free object itself as this
array. This requires additional branch in somewhat critical lock path
to check if it is first freed object or not but that's all we need.
Benefits is that we can save extra memory usage and reduce some
computational overhead by allocating a management array when new slab is
created.
Code change is rather complex than what we can expect from the idea, in
order to handle debugging feature efficiently. If you want to see core
idea only, please remove '#if DEBUG' block in the patch.
Although this idea can apply to all caches whose size is larger than
management array size, it isn't applied to caches which have a
constructor. If such cache's object is used for management array,
constructor should be called for it before that object is returned to
user. I guess that overhead overwhelm benefit in that case so this idea
doesn't applied to them at least now.
For summary, from now on, slab management type is determined by
following logic.
1) if management array size is smaller than object size and no ctor, it
becomes OBJFREELIST_SLAB.
2) if management array size is smaller than leftover, it becomes
NORMAL_SLAB which uses leftover as a array.
3) if OFF_SLAB help to save memory than way 4), it becomes OFF_SLAB.
It allocate a management array from the other cache so memory waste
happens.
4) others become NORMAL_SLAB. It uses dedicated internal memory in a
slab as a management array so it causes memory waste.
In my system, without enabling CONFIG_DEBUG_SLAB, Almost caches become
OBJFREELIST_SLAB and NORMAL_SLAB (using leftover) which doesn't waste
memory. Following is the result of number of caches with specific slab
management type.
TOTAL = OBJFREELIST + NORMAL(leftover) + NORMAL + OFF
/Before/
126 = 0 + 60 + 25 + 41
/After/
126 = 97 + 12 + 15 + 2
Result shows that number of caches that doesn't waste memory increase
from 60 to 109.
I did some benchmarking and it looks that benefit are more than loss.
Kmalloc: Repeatedly allocate then free test
/Before/
[ 0.286809] 1. Kmalloc: Repeatedly allocate then free test
[ 1.143674] 100000 times kmalloc(32) -> 116 cycles kfree -> 78 cycles
[ 1.441726] 100000 times kmalloc(64) -> 121 cycles kfree -> 80 cycles
[ 1.815734] 100000 times kmalloc(128) -> 168 cycles kfree -> 85 cycles
[ 2.380709] 100000 times kmalloc(256) -> 287 cycles kfree -> 95 cycles
[ 3.101153] 100000 times kmalloc(512) -> 370 cycles kfree -> 117 cycles
[ 3.942432] 100000 times kmalloc(1024) -> 413 cycles kfree -> 156 cycles
[ 5.227396] 100000 times kmalloc(2048) -> 622 cycles kfree -> 248 cycles
[ 7.519793] 100000 times kmalloc(4096) -> 1102 cycles kfree -> 452 cycles
/After/
[ 1.205313] 100000 times kmalloc(32) -> 117 cycles kfree -> 78 cycles
[ 1.510526] 100000 times kmalloc(64) -> 124 cycles kfree -> 81 cycles
[ 1.827382] 100000 times kmalloc(128) -> 130 cycles kfree -> 84 cycles
[ 2.226073] 100000 times kmalloc(256) -> 177 cycles kfree -> 92 cycles
[ 2.814747] 100000 times kmalloc(512) -> 286 cycles kfree -> 112 cycles
[ 3.532952] 100000 times kmalloc(1024) -> 344 cycles kfree -> 141 cycles
[ 4.608777] 100000 times kmalloc(2048) -> 519 cycles kfree -> 210 cycles
[ 6.350105] 100000 times kmalloc(4096) -> 789 cycles kfree -> 391 cycles
In fact, I tested another idea implementing OBJFREELIST_SLAB with
extendable linked array through another freed object. It can remove
memory waste completely but it causes more computational overhead in
critical lock path and it seems that overhead outweigh benefit. So, this
patch doesn't include it.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Tue, 15 Mar 2016 21:54:47 +0000 (14:54 -0700)]
mm/slab: factor out debugging initialization in cache_init_objs()
cache_init_objs() will be changed in following patch and current form
doesn't fit well for that change. So, before doing it, this patch
separates debugging initialization. This would cause two loop iteration
when debugging is enabled, but, this overhead seems too light than debug
feature itself so effect may not be visible. This patch will greatly
simplify changes in cache_init_objs() in following patch.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Tue, 15 Mar 2016 21:54:44 +0000 (14:54 -0700)]
mm/slab: factor out slab list fixup code
Slab list should be fixed up after object is detached from the slab and
this happens at two places. They do exactly same thing. They will be
changed in the following patch, so, to reduce code duplication, this
patch factor out them and make it common function.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Tue, 15 Mar 2016 21:54:41 +0000 (14:54 -0700)]
mm/slab: make criteria for off slab determination robust and simple
To become an off slab, there are some constraints to avoid bootstrapping
problem and recursive call. This can be avoided differently by simply
checking that corresponding kmalloc cache is ready and it's not a off
slab. It would be more robust because static size checking can be
affected by cache size change or architecture type but dynamic checking
isn't.
One check 'freelist_cache->size > cachep->size / 2' is added to check
benefit of choosing off slab, because, now, there is no size constraint
which ensures enough advantage when selecting off slab.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Tue, 15 Mar 2016 21:54:38 +0000 (14:54 -0700)]
mm/slab: do not change cache size if debug pagealloc isn't possible
We can fail to setup off slab in some conditions. Even in this case,
debug pagealloc increases cache size to PAGE_SIZE in advance and it is
waste because debug pagealloc cannot work for it when it isn't the off
slab. To improve this situation, this patch checks first that this
cache with increased size is suitable for off slab. It actually
increases cache size when it is suitable for off-slab, so possible waste
is removed.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Tue, 15 Mar 2016 21:54:35 +0000 (14:54 -0700)]
mm/slab: clean up cache type determination
Current cache type determination code is open-code and looks not
understandable. Following patch will introduce one more cache type and
it would make code more complex. So, before it happens, this patch
abstracts these codes.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Tue, 15 Mar 2016 21:54:33 +0000 (14:54 -0700)]
mm/slab: align cache size first before determination of OFF_SLAB candidate
Finding suitable OFF_SLAB candidate is more related to aligned cache
size rather than original size. Same reasoning can be applied to the
debug pagealloc candidate. So, this patch moves up alignment fixup to
proper position. From that point, size is aligned so we can remove some
alignment fixups.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Tue, 15 Mar 2016 21:54:30 +0000 (14:54 -0700)]
mm/slab: put the freelist at the end of slab page
Currently, the freelist is at the front of slab page. This requires
extra space to meet object alignment requirement. If we put the
freelist at the end of a slab page, objects could start at page boundary
and will be at correct alignment. This is possible because freelist has
no alignment constraint itself.
This gives us two benefits: It removes extra memory space for the
freelist alignment and remove complex calculation at cache
initialization step. I can't think notable drawback here.
I mentioned that this would reduce extra memory space, but, this benefit
is rather theoretical because it can be applied to very few cases.
Following is the example cache type that can get benefit from this
change.
size align num before after
32 8 124 4100 4092
64 8 63 4103 4095
88 8 46 4102 4094
272 8 15 4103 4095
408 8 10 4098 4090
32 16 124 4108 4092
64 16 63 4111 4095
32 32 124 4124 4092
64 32 63 4127 4095
96 32 42 4106 4074
before means whole size for objects and aligned freelist before applying
patch and after shows the result of this patch.
Since before is more than 4096, number of object should decrease and
memory waste happens.
Anyway, this patch removes complex calculation so looks beneficial to
me.
[akpm@linux-foundation.org: fix kerneldoc]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Tue, 15 Mar 2016 21:54:27 +0000 (14:54 -0700)]
mm/slab: remove object status buffer for DEBUG_SLAB_LEAK
Now, we don't use object status buffer in any setup. Remove it.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Tue, 15 Mar 2016 21:54:24 +0000 (14:54 -0700)]
mm/slab: alternative implementation for DEBUG_SLAB_LEAK
DEBUG_SLAB_LEAK is a debug option. It's current implementation requires
status buffer so we need more memory to use it. And, it cause
kmem_cache initialization step more complex.
To remove this extra memory usage and to simplify initialization step,
this patch implement this feature with another way.
When user requests to get slab object owner information, it marks that
getting information is started. And then, all free objects in caches
are flushed to corresponding slab page. Now, we can distinguish all
freed object so we can know all allocated objects, too. After
collecting slab object owner information on allocated objects, mark is
checked that there is no free during the processing. If true, we can be
sure that our information is correct so information is returned to user.
Although this way is rather complex, it has two important benefits
mentioned above. So, I think it is worth changing.
There is one drawback that it takes more time to get slab object owner
information but it is just a debug option so it doesn't matter at all.
To help review, this patch implements new way only. Following patch
will remove useless code.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Tue, 15 Mar 2016 21:54:21 +0000 (14:54 -0700)]
mm/slab: clean up DEBUG_PAGEALLOC processing code
Currently, open code for checking DEBUG_PAGEALLOC cache is spread to
some sites. It makes code unreadable and hard to change.
This patch cleans up this code. The following patch will change the
criteria for DEBUG_PAGEALLOC cache so this clean-up will help it, too.
[akpm@linux-foundation.org: fix build with CONFIG_DEBUG_PAGEALLOC=n]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Tue, 15 Mar 2016 21:54:18 +0000 (14:54 -0700)]
mm/slab: use more appropriate condition check for debug_pagealloc
debug_pagealloc debugging is related to SLAB_POISON flag rather than
FORCED_DEBUG option, although FORCED_DEBUG option will enable
SLAB_POISON. Fix it.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Tue, 15 Mar 2016 21:54:15 +0000 (14:54 -0700)]
mm/slab: activate debug_pagealloc in SLAB when it is actually enabled
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Tue, 15 Mar 2016 21:54:12 +0000 (14:54 -0700)]
mm/slab: remove the checks for slab implementation bug
Some of "#if DEBUG" are for reporting slab implementation bug rather
than user usecase bug. It's not really needed because slab is stable
for a quite long time and it makes code too dirty. This patch remove
it.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Tue, 15 Mar 2016 21:54:09 +0000 (14:54 -0700)]
mm/slab: remove useless structure define
It is obsolete so remove it.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Tue, 15 Mar 2016 21:54:06 +0000 (14:54 -0700)]
mm/slab: fix stale code comment
This patchset implements a new freed object management way, that is,
OBJFREELIST_SLAB. Purpose of it is to reduce memory overhead in SLAB.
SLAB needs a array to manage freed objects in a slab. If there is
leftover after objects are packed into a slab, we can use it as a
management array, and, in this case, there is no memory waste. But, in
the other cases, we need to allocate extra memory for a management array
or utilize dedicated internal memory in a slab for it. Both cases
causes memory waste so it's not good.
With this patchset, freed object itself can be used for a management
array. So, memory waste could be reduced. Detailed idea and numbers
are described in last patch's commit description. Please refer it.
In fact, I tested another idea implementing OBJFREELIST_SLAB with
extendable linked array through another freed object. It can remove
memory waste completely but it causes more computational overhead in
critical lock path and it seems that overhead outweigh benefit. So,
this patchset doesn't include it. I will attach prototype just for a
reference.
This patch (of 16):
We use freelist_idx_t type for free object management whose size would be
smaller than size of unsigned int. Fix it.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jesper Dangaard Brouer [Tue, 15 Mar 2016 21:54:03 +0000 (14:54 -0700)]
mm: fix some spelling
Fix up trivial spelling errors, noticed while reading the code.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jesper Dangaard Brouer [Tue, 15 Mar 2016 21:54:00 +0000 (14:54 -0700)]
mm: new API kfree_bulk() for SLAB+SLUB allocators
This patch introduce a new API call kfree_bulk() for bulk freeing memory
objects not bound to a single kmem_cache.
Christoph pointed out that it is possible to implement freeing of
objects, without knowing the kmem_cache pointer as that information is
available from the object's page->slab_cache. Proposing to remove the
kmem_cache argument from the bulk free API.
Jesper demonstrated that these extra steps per object comes at a
performance cost. It is only in the case CONFIG_MEMCG_KMEM is compiled
in and activated runtime that these steps are done anyhow. The extra
cost is most visible for SLAB allocator, because the SLUB allocator does
the page lookup (virt_to_head_page()) anyhow.
Thus, the conclusion was to keep the kmem_cache free bulk API with a
kmem_cache pointer, but we can still implement a kfree_bulk() API fairly
easily. Simply by handling if kmem_cache_free_bulk() gets called with a
kmem_cache NULL pointer.
This does increase the code size a bit, but implementing a separate
kfree_bulk() call would likely increase code size even more.
Below benchmarks cost of alloc+free (obj size 256 bytes) on CPU i7-4790K
@ 4.00GHz, no PREEMPT and CONFIG_MEMCG_KMEM=y.
Code size increase for SLAB:
add/remove: 0/0 grow/shrink: 1/0 up/down: 74/0 (74)
function old new delta
kmem_cache_free_bulk 660 734 +74
SLAB fastpath: 87 cycles(tsc) 21.814
sz - fallback - kmem_cache_free_bulk - kfree_bulk
1 - 103 cycles 25.878 ns - 41 cycles 10.498 ns - 81 cycles 20.312 ns
2 - 94 cycles 23.673 ns - 26 cycles 6.682 ns - 42 cycles 10.649 ns
3 - 92 cycles 23.181 ns - 21 cycles 5.325 ns - 39 cycles 9.950 ns
4 - 90 cycles 22.727 ns - 18 cycles 4.673 ns - 26 cycles 6.693 ns
8 - 89 cycles 22.270 ns - 14 cycles 3.664 ns - 23 cycles 5.835 ns
16 - 88 cycles 22.038 ns - 14 cycles 3.503 ns - 22 cycles 5.543 ns
30 - 89 cycles 22.284 ns - 13 cycles 3.310 ns - 20 cycles 5.197 ns
32 - 88 cycles 22.249 ns - 13 cycles 3.420 ns - 20 cycles 5.166 ns
34 - 88 cycles 22.224 ns - 14 cycles 3.643 ns - 20 cycles 5.170 ns
48 - 88 cycles 22.088 ns - 14 cycles 3.507 ns - 20 cycles 5.203 ns
64 - 88 cycles 22.063 ns - 13 cycles 3.428 ns - 20 cycles 5.152 ns
128 - 89 cycles 22.483 ns - 15 cycles 3.891 ns - 23 cycles 5.885 ns
158 - 89 cycles 22.381 ns - 15 cycles 3.779 ns - 22 cycles 5.548 ns
250 - 91 cycles 22.798 ns - 16 cycles 4.152 ns - 23 cycles 5.967 ns
SLAB when enabling MEMCG_KMEM runtime:
- kmemcg fastpath: 130 cycles(tsc) 32.684 ns (step:0)
1 - 148 cycles 37.220 ns - 66 cycles 16.622 ns - 66 cycles 16.583 ns
2 - 141 cycles 35.510 ns - 51 cycles 12.820 ns - 58 cycles 14.625 ns
3 - 140 cycles 35.017 ns - 37 cycles 9.326 ns - 33 cycles 8.474 ns
4 - 137 cycles 34.507 ns - 31 cycles 7.888 ns - 33 cycles 8.300 ns
8 - 140 cycles 35.069 ns - 25 cycles 6.461 ns - 25 cycles 6.436 ns
16 - 138 cycles 34.542 ns - 23 cycles 5.945 ns - 22 cycles 5.670 ns
30 - 136 cycles 34.227 ns - 22 cycles 5.502 ns - 22 cycles 5.587 ns
32 - 136 cycles 34.253 ns - 21 cycles 5.475 ns - 21 cycles 5.324 ns
34 - 136 cycles 34.254 ns - 21 cycles 5.448 ns - 20 cycles 5.194 ns
48 - 136 cycles 34.075 ns - 21 cycles 5.458 ns - 21 cycles 5.367 ns
64 - 135 cycles 33.994 ns - 21 cycles 5.350 ns - 21 cycles 5.259 ns
128 - 137 cycles 34.446 ns - 23 cycles 5.816 ns - 22 cycles 5.688 ns
158 - 137 cycles 34.379 ns - 22 cycles 5.727 ns - 22 cycles 5.602 ns
250 - 138 cycles 34.755 ns - 24 cycles 6.093 ns - 23 cycles 5.986 ns
Code size increase for SLUB:
function old new delta
kmem_cache_free_bulk 717 799 +82
SLUB benchmark:
SLUB fastpath: 46 cycles(tsc) 11.691 ns (step:0)
sz - fallback - kmem_cache_free_bulk - kfree_bulk
1 - 61 cycles 15.486 ns - 53 cycles 13.364 ns - 57 cycles 14.464 ns
2 - 54 cycles 13.703 ns - 32 cycles 8.110 ns - 33 cycles 8.482 ns
3 - 53 cycles 13.272 ns - 25 cycles 6.362 ns - 27 cycles 6.947 ns
4 - 51 cycles 12.994 ns - 24 cycles 6.087 ns - 24 cycles 6.078 ns
8 - 50 cycles 12.576 ns - 21 cycles 5.354 ns - 22 cycles 5.513 ns
16 - 49 cycles 12.368 ns - 20 cycles 5.054 ns - 20 cycles 5.042 ns
30 - 49 cycles 12.273 ns - 18 cycles 4.748 ns - 19 cycles 4.758 ns
32 - 49 cycles 12.401 ns - 19 cycles 4.821 ns - 19 cycles 4.810 ns
34 - 98 cycles 24.519 ns - 24 cycles 6.154 ns - 24 cycles 6.157 ns
48 - 83 cycles 20.833 ns - 21 cycles 5.446 ns - 21 cycles 5.429 ns
64 - 75 cycles 18.891 ns - 20 cycles 5.247 ns - 20 cycles 5.238 ns
128 - 93 cycles 23.271 ns - 27 cycles 6.856 ns - 27 cycles 6.823 ns
158 - 102 cycles 25.581 ns - 30 cycles 7.714 ns - 30 cycles 7.695 ns
250 - 107 cycles 26.917 ns - 38 cycles 9.514 ns - 38 cycles 9.506 ns
SLUB when enabling MEMCG_KMEM runtime:
- kmemcg fastpath: 71 cycles(tsc) 17.897 ns (step:0)
1 - 85 cycles 21.484 ns - 78 cycles 19.569 ns - 75 cycles 18.938 ns
2 - 81 cycles 20.363 ns - 45 cycles 11.258 ns - 44 cycles 11.076 ns
3 - 78 cycles 19.709 ns - 33 cycles 8.354 ns - 32 cycles 8.044 ns
4 - 77 cycles 19.430 ns - 28 cycles 7.216 ns - 28 cycles 7.003 ns
8 - 101 cycles 25.288 ns - 23 cycles 5.849 ns - 23 cycles 5.787 ns
16 - 76 cycles 19.148 ns - 20 cycles 5.162 ns - 20 cycles 5.081 ns
30 - 76 cycles 19.067 ns - 19 cycles 4.868 ns - 19 cycles 4.821 ns
32 - 76 cycles 19.052 ns - 19 cycles 4.857 ns - 19 cycles 4.815 ns
34 - 121 cycles 30.291 ns - 25 cycles 6.333 ns - 25 cycles 6.268 ns
48 - 108 cycles 27.111 ns - 21 cycles 5.498 ns - 21 cycles 5.458 ns
64 - 100 cycles 25.164 ns - 20 cycles 5.242 ns - 20 cycles 5.229 ns
128 - 155 cycles 38.976 ns - 27 cycles 6.886 ns - 27 cycles 6.892 ns
158 - 132 cycles 33.034 ns - 30 cycles 7.711 ns - 30 cycles 7.728 ns
250 - 130 cycles 32.612 ns - 38 cycles 9.560 ns - 38 cycles 9.549 ns
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jesper Dangaard Brouer [Tue, 15 Mar 2016 21:53:56 +0000 (14:53 -0700)]
slab: implement bulk free in SLAB allocator
This patch implements the free side of bulk API for the SLAB allocator
kmem_cache_free_bulk(), and concludes the implementation of optimized
bulk API for SLAB allocator.
Benchmarked[1] cost of alloc+free (obj size 256 bytes) on CPU i7-4790K @
4.00GHz, with no debug options, no PREEMPT and CONFIG_MEMCG_KMEM=y but
no active user of kmemcg.
SLAB single alloc+free cost: 87 cycles(tsc) 21.814 ns with this
optimized config.
bulk- Current fallback - optimized SLAB bulk
1 - 102 cycles(tsc) 25.747 ns - 41 cycles(tsc) 10.490 ns - improved 59.8%
2 - 94 cycles(tsc) 23.546 ns - 26 cycles(tsc) 6.567 ns - improved 72.3%
3 - 92 cycles(tsc) 23.127 ns - 20 cycles(tsc) 5.244 ns - improved 78.3%
4 - 90 cycles(tsc) 22.663 ns - 18 cycles(tsc) 4.588 ns - improved 80.0%
8 - 88 cycles(tsc) 22.242 ns - 14 cycles(tsc) 3.656 ns - improved 84.1%
16 - 88 cycles(tsc) 22.010 ns - 13 cycles(tsc) 3.480 ns - improved 85.2%
30 - 89 cycles(tsc) 22.305 ns - 13 cycles(tsc) 3.303 ns - improved 85.4%
32 - 89 cycles(tsc) 22.277 ns - 13 cycles(tsc) 3.309 ns - improved 85.4%
34 - 88 cycles(tsc) 22.246 ns - 13 cycles(tsc) 3.294 ns - improved 85.2%
48 - 88 cycles(tsc) 22.121 ns - 13 cycles(tsc) 3.492 ns - improved 85.2%
64 - 88 cycles(tsc) 22.052 ns - 13 cycles(tsc) 3.411 ns - improved 85.2%
128 - 89 cycles(tsc) 22.452 ns - 15 cycles(tsc) 3.841 ns - improved 83.1%
158 - 89 cycles(tsc) 22.403 ns - 14 cycles(tsc) 3.746 ns - improved 84.3%
250 - 91 cycles(tsc) 22.775 ns - 16 cycles(tsc) 4.111 ns - improved 82.4%
Notice it is not recommended to do very large bulk operation with
this bulk API, because local IRQs are disabled in this period.
[1] https://github.com/netoptimizer/prototype-kernel/blob/master/kernel/mm/slab_bulk_test01.c
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jesper Dangaard Brouer [Tue, 15 Mar 2016 21:53:53 +0000 (14:53 -0700)]
slab: avoid running debug SLAB code with IRQs disabled for alloc_bulk
Move the call to cache_alloc_debugcheck_after() outside the IRQ disabled
section in kmem_cache_alloc_bulk().
When CONFIG_DEBUG_SLAB is disabled the compiler should remove this code.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jesper Dangaard Brouer [Tue, 15 Mar 2016 21:53:50 +0000 (14:53 -0700)]
slab: implement bulk alloc in SLAB allocator
This patch implements the alloc side of bulk API for the SLAB allocator.
Further optimization are still possible by changing the call to
__do_cache_alloc() into something that can return multiple objects.
This optimization is left for later, given end results already show in
the area of 80% speedup.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jesper Dangaard Brouer [Tue, 15 Mar 2016 21:53:47 +0000 (14:53 -0700)]
slab: use slab_post_alloc_hook in SLAB allocator shared with SLUB
Reviewers notice that the order in slab_post_alloc_hook() of
kmemcheck_slab_alloc() and kmemleak_alloc_recursive() gets swapped
compared to slab.c / SLAB allocator.
Also notice memset now occurs before calling kmemcheck_slab_alloc() and
kmemleak_alloc_recursive().
I assume this reordering of kmemcheck, kmemleak and memset is okay
because this is the order they are used by the SLUB allocator.
This patch completes the sharing of alloc_hook's between SLUB and SLAB.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jesper Dangaard Brouer [Tue, 15 Mar 2016 21:53:44 +0000 (14:53 -0700)]
mm: kmemcheck skip object if slab allocation failed
In the SLAB allocator kmemcheck_slab_alloc() is guarded against being
called in case the object is NULL. In SLUB allocator this NULL pointer
invocation can happen, which seems like an oversight.
Move the NULL pointer check into kmemcheck code (kmemcheck_slab_alloc)
so the check gets moved out of the fastpath, when not compiled with
CONFIG_KMEMCHECK.
This is a step towards sharing post_alloc_hook between SLUB and SLAB,
because slab_post_alloc_hook() does not perform this check before
calling kmemcheck_slab_alloc().
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jesper Dangaard Brouer [Tue, 15 Mar 2016 21:53:41 +0000 (14:53 -0700)]
slab: use slab_pre_alloc_hook in SLAB allocator shared with SLUB
Deduplicate code in SLAB allocator functions slab_alloc() and
slab_alloc_node() by using the slab_pre_alloc_hook() call, which is now
shared between SLUB and SLAB.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jesper Dangaard Brouer [Tue, 15 Mar 2016 21:53:38 +0000 (14:53 -0700)]
mm: fault-inject take over bootstrap kmem_cache check
Remove the SLAB specific function slab_should_failslab(), by moving the
check against fault-injection for the bootstrap slab, into the shared
function should_failslab() (used by both SLAB and SLUB).
This is a step towards sharing alloc_hook's between SLUB and SLAB.
This bootstrap slab "kmem_cache" is used for allocating struct
kmem_cache objects to the allocator itself.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jesper Dangaard Brouer [Tue, 15 Mar 2016 21:53:35 +0000 (14:53 -0700)]
mm/slab: move SLUB alloc hooks to common mm/slab.h
First step towards sharing alloc_hook's between SLUB and SLAB
allocators. Move the SLUB allocators *_alloc_hook to the common
mm/slab.h for internal slab definitions.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jesper Dangaard Brouer [Tue, 15 Mar 2016 21:53:32 +0000 (14:53 -0700)]
slub: clean up code for kmem cgroup support to kmem_cache_free_bulk
This change is primarily an attempt to make it easier to realize the
optimizations the compiler performs in-case CONFIG_MEMCG_KMEM is not
enabled.
Performance wise, even when CONFIG_MEMCG_KMEM is compiled in, the
overhead is zero. This is because, as long as no process have enabled
kmem cgroups accounting, the assignment is replaced by asm-NOP
operations. This is possible because memcg_kmem_enabled() uses a
static_key_false() construct.
It also helps readability as it avoid accessing the p[] array like:
p[size - 1] which "expose" that the array is processed backwards inside
helper function build_detached_freelist().
Lastly this also makes the code more robust, in error case like passing
NULL pointers in the array. Which were previously handled before commit
033745189b1b ("slub: add missing kmem cgroup support to
kmem_cache_free_bulk").
Fixes:
033745189b1b ("slub: add missing kmem cgroup support to kmem_cache_free_bulk")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Tue, 15 Mar 2016 21:53:29 +0000 (14:53 -0700)]
paride: make 'verbose' parameter an 'int' again
gcc-6.0 found an ancient bug in the paride driver, which had a
"module_param(verbose, bool, 0);" since before 2.6.12, but actually uses
it to accept '0', '1' or '2' as arguments:
drivers/block/paride/pd.c: In function 'pd_init_dev_parms':
drivers/block/paride/pd.c:298:29: warning: comparison of constant '1' with boolean expression is always false [-Wbool-compare]
#define DBMSG(msg) ((verbose>1)?(msg):NULL)
In 2012, Rusty did a cleanup patch that also changed the type of the
variable to 'bool', which introduced what is now a gcc warning.
This changes the type back to 'int' and adapts the module_param() line
instead, so it should work as documented in case anyone ever cares about
running the ancient driver with debugging.
Fixes:
90ab5ee94171 ("module_param: make bool parameters really bool (drivers & misc)")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rusty Russell <rusty@rustcorp.com.au>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
San Mehat [Tue, 15 Mar 2016 21:53:26 +0000 (14:53 -0700)]
block: partition: add partition specific uevent callbacks for partition info
This patch has been carried in the Android tree for quite some time and
is one of the few patches required to get a mainline kernel up and
running with an exsiting Android userspace. So I wanted to submit it
for review and consideration if it should be merged.
For partitions, add new uevent parameters 'PARTN' which specifies the
partitions index in the table, and 'PARTNAME', which specifies PARTNAME
specifices the partition name of a partition device.
Android's userspace uses this for creating device node links from the
partition name and number, ie:
/dev/block/platform/soc/by-name/system
or
/dev/block/platform/soc/by-num/p1
One can see its usage here:
https://android.googlesource.com/platform/system/core/+/master/init/devices.cpp#355
and
https://android.googlesource.com/platform/system/core/+/master/init/devices.cpp#494
[john.stultz@linaro.org: dropped NPARTS and reworded commit message for context]
Signed-off-by: Dima Zavin <dima@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Rom Lemarchand <romlem@google.com>
Cc: Android Kernel Team <kernel-team@android.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: <harald@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jun Piao [Tue, 15 Mar 2016 21:53:23 +0000 (14:53 -0700)]
ocfs2/dlm: fix a variable overflow problem in dlmdomain.c
In dlm_send_join_cancels(), node is defined with type unsigned int, but
initialized with -1, this will lead variable overflow. Although this
won't cause any runtime problem, the code looks a little uncoordinated.
Signed-off-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jiufei Xue [Tue, 15 Mar 2016 21:53:20 +0000 (14:53 -0700)]
ocfs2: fix a tiny race that leads file system read-only
when o2hb detect a node down, it first set the dead node to recovery map
and create ocfs2rec which will replay journal for dead node. o2hb
thread then call dlm_do_local_recovery_cleanup() to delete the lock for
dead node. After the lock of dead node is gone, locks for other nodes
can be granted and may modify the meta data without replaying journal of
the dead node. The detail is described as follows.
N1 N2 N3(master)
modify the extent tree of
inode, and commit
dirty metadata to journal,
then goes down.
o2hb thread detects
N1 goes down, set
recovery map and
delete the lock of N1.
dlm_thread flush ast
for the lock of N2.
do not detect the death
of N1, so recovery map is
empty.
read inode from disk
without replaying
the journal of N1 and
modify the extent tree
of the inode that N1
had modified.
ocfs2rec recover the
journal of N1.
The modification of N2
is lost.
The modification of N1 and N2 are not serial, and it will lead to
read-only file system. We can set recovery_waiting flag to the lock
resource after delete the lock for dead node to prevent other node from
getting the lock before dlm recovery. After dlm recovery, the recovery
map on N2 is not empty, ocfs2_inode_lock_full_nested() will wait for ocfs2
recovery.
Signed-off-by: Jiufei Xue <xuejiufei@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
xuejiufei [Tue, 15 Mar 2016 21:53:17 +0000 (14:53 -0700)]
ocfs2/dlm: return EINVAL when the lockres on migration target is in DROPPING_REF state
If master migrate this lock resource to node when it happened to purge
it, a new lock resource will be created and inserted into hash list. If
then master goes down, the lock resource being purged is recovered, so
there exist two lock resource with different owner. So return error to
master if the lock resource is in DROPPING state, master will retry to
migrate this lock resource.
Signed-off-by: xuejiufei <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
xuejiufei [Tue, 15 Mar 2016 21:53:14 +0000 (14:53 -0700)]
ocfs2/dlm: clear DROPPING_REF flag when the master goes down
If the master goes down after return in-progress for deref message. The
lock resource on non-master node can not be purged. Clear the
DROPPING_REF flag and recovery it.
Signed-off-by: xuejiufei <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
xuejiufei [Tue, 15 Mar 2016 21:53:11 +0000 (14:53 -0700)]
ocfs2/dlm: return in progress if master can not clear the refmap bit right now
Master returns in-progress to non-master node when it can not clear the
refmap bit right now. And non-master node will not purge the lock
resource until receiving deref done message.
Signed-off-by: xuejiufei <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
xuejiufei [Tue, 15 Mar 2016 21:53:08 +0000 (14:53 -0700)]
ocfs2/dlm: add DEREF_DONE message
This series of patches is to fix the dis-order issue of setting/clearing
refmap bit described below.
Node 1 Node 2(master)
dlmlock
dlm_do_master_request
dlm_master_request_handler
-> dlm_lockres_set_refmap_bit
dlmlock succeed
dlmunlock succeed
dlm_purge_lockres
dlm_deref_handler
-> find lock resource is in
DLM_LOCK_RES_SETREF_INPROG state,
so dispatch a deref work
dlm_purge_lockres succeed.
call dlmlock again
dlm_do_master_request
dlm_master_request_handler
-> dlm_lockres_set_refmap_bit
deref work trigger, call
dlm_lockres_clear_refmap_bit
to clear Node 1 from refmap
dlm_purge_lockres succeed
dlm_send_remote_lock_request
return DLM_IVLOCKID because
the lockres is not exist
BUG if the lockres is $RECOVERY
This series of patches add a new message to keep the order of set and
clear. Other nodes can purge the lock resource only after the refmap bit
on master is cleared.
This patch is to add DEREF_DONE message and corresponding handler. Node
can purge the lock resource after receiving this message. As a new
message is added, so increase the minor number of dlm protocol version.
Signed-off-by: xuejiufei <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joseph Qi [Tue, 15 Mar 2016 21:53:05 +0000 (14:53 -0700)]
ocfs2/dlm: fix a typo in dlmcommon.h
Refer to cluster/tcp.h, NET_MAX_PAYLOAD_BYTES is a typo for
O2NET_MAX_PAYLOAD_BYTES.
Since currently DLM_MIG_LOCKRES_RESERVED is not actually used, it won't
cause any problem. But we'd better correct it for further use.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
jiangyiwen [Tue, 15 Mar 2016 21:53:01 +0000 (14:53 -0700)]
ocfs2: use spinlock_irqsave() to downconvert lock in ocfs2_osb_dump()
Commit
a75e9ccabd92 ("ocfs2: use spinlock irqsave for downconvert lock")
missed an unmodified place in ocfs2_osb_dump(), so it still exists a
deadlock scenario.
ocfs2_wake_downconvert_thread
ocfs2_rw_unlock
ocfs2_dio_end_io
dio_complete
.....
bio_endio
req_bio_endio
....
scsi_io_completion
blk_done_softirq
__do_softirq
do_softirq
irq_exit
do_IRQ
ocfs2_osb_dump
cat /sys/kernel/debug/ocfs2/${uuid}/fs_state
This patch still uses spin_lock_irqsave() - replace spin_lock() to solve
this situation.
Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
jiangyiwen [Tue, 15 Mar 2016 21:52:58 +0000 (14:52 -0700)]
ocfs2/cluster: replace the interrupt safe spinlocks with common ones
There actually no hardware or software interrupts in the context which
using o2hb_live_lock, so we don't need to worry about race conditions
caused by irq/softirq with spinlock held. Turning off irq is not good
for system performance after all. Just replace them with a non
interrupt safe function.
Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sudip Mukherjee [Tue, 15 Mar 2016 21:52:55 +0000 (14:52 -0700)]
blackfin: define dummy pgprot_writecombine for !MMU
blackfin allmodconfig build fails with the error:
../sound/core/pcm_native.c: In function 'snd_pcm_lib_default_mmap':
../sound/core/pcm_native.c:3386:24: error: implicit declaration of function 'pgprot_writecombine' [-Werror=implicit-function-declaration]
area->vm_page_prot = pgprot_writecombine(area->vm_page_prot);
^
../sound/core/pcm_native.c:3386:22: error: incompatible types when assigning to type 'pgprot_t {aka struct <anonymous>}' from type 'int'
area->vm_page_prot = pgprot_writecombine(area->vm_page_prot);
^
When !MMU, asm-generic will not define default pgprot_writecombine, so
blackfin needs to define it by itself.
The patch idea is from commit
65b9ab888cd7 ("arch/c6x/include/asm/pgtable.h:
define dummy pgprot_writecombine for !MMU")
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Cc: Steven Miao <realmz6@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sudip Mukherjee [Tue, 15 Mar 2016 21:52:52 +0000 (14:52 -0700)]
m32r: mm: fix build warning
While building we are getting warnings:
arch/m32r/mm/init.c:63:17: warning: unused variable 'low'
arch/m32r/mm/init.c:62:17: warning: unused variable 'max_dma'
max_dma and low are only used if CONFIG_MMU is defined. Lets declare
the variables inside the #ifdef.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Zijlstra [Tue, 15 Mar 2016 21:52:49 +0000 (14:52 -0700)]
tags: Fix DEFINE_PER_CPU expansions
$ make tags
GEN tags
ctags: Warning: drivers/acpi/processor_idle.c:64: null expansion of name pattern "\1"
ctags: Warning: drivers/xen/events/events_2l.c:41: null expansion of name pattern "\1"
ctags: Warning: kernel/locking/lockdep.c:151: null expansion of name pattern "\1"
ctags: Warning: kernel/rcu/rcutorture.c:133: null expansion of name pattern "\1"
ctags: Warning: kernel/rcu/rcutorture.c:135: null expansion of name pattern "\1"
ctags: Warning: kernel/workqueue.c:323: null expansion of name pattern "\1"
ctags: Warning: net/ipv4/syncookies.c:53: null expansion of name pattern "\1"
ctags: Warning: net/ipv6/syncookies.c:44: null expansion of name pattern "\1"
ctags: Warning: net/rds/page.c:45: null expansion of name pattern "\1"
Which are all the result of the DEFINE_PER_CPU pattern:
scripts/tags.sh:200: '/\<DEFINE_PER_CPU([^,]*, *\([[:alnum:]_]*\)/\1/v/'
scripts/tags.sh:201: '/\<DEFINE_PER_CPU_SHARED_ALIGNED([^,]*, *\([[:alnum:]_]*\)/\1/v/'
The below cures them. All except the workqueue one are within reasonable
distance of the 80 char limit. TJ do you have any preference on how to
fix the wq one, or shall we just not care its too long?
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Geliang Tang [Tue, 15 Mar 2016 21:52:46 +0000 (14:52 -0700)]
init/main.c: use list_for_each_entry()
Use list_for_each_entry() instead of list_for_each() to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 15 Mar 2016 02:44:38 +0000 (19:44 -0700)]
Merge branch 'timers-nohz-for-linus' of git://git./linux/kernel/git/tip/tip
Pull NOHZ updates from Ingo Molnar:
"NOHZ enhancements, by Frederic Weisbecker, which reorganizes/refactors
the NOHZ 'can the tick be stopped?' infrastructure and related code to
be data driven, and harmonizes the naming and handling of all the
various properties"
[ This makes the ugly "fetch_or()" macro that the scheduler used
internally a new generic helper, and does a bad job at it.
I'm pulling it, but I've asked Ingo and Frederic to get this
fixed up ]
* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched-clock: Migrate to use new tick dependency mask model
posix-cpu-timers: Migrate to use new tick dependency mask model
sched: Migrate sched to use new tick dependency mask model
sched: Account rr tasks
perf: Migrate perf to use new tick dependency mask model
nohz: Use enum code for tick stop failure tracing message
nohz: New tick dependency mask
nohz: Implement wide kick on top of irq work
atomic: Export fetch_or()
Linus Torvalds [Tue, 15 Mar 2016 02:14:06 +0000 (19:14 -0700)]
Merge branch 'sched-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle are:
- Make schedstats a runtime tunable (disabled by default) and
optimize it via static keys.
As most distributions enable CONFIG_SCHEDSTATS=y due to its
instrumentation value, this is a nice performance enhancement.
(Mel Gorman)
- Implement 'simple waitqueues' (swait): these are just pure
waitqueues without any of the more complex features of full-blown
waitqueues (callbacks, wake flags, wake keys, etc.). Simple
waitqueues have less memory overhead and are faster.
Use simple waitqueues in the RCU code (in 4 different places) and
for handling KVM vCPU wakeups.
(Peter Zijlstra, Daniel Wagner, Thomas Gleixner, Paul Gortmaker,
Marcelo Tosatti)
- sched/numa enhancements (Rik van Riel)
- NOHZ performance enhancements (Rik van Riel)
- Various sched/deadline enhancements (Steven Rostedt)
- Various fixes (Peter Zijlstra)
- ... and a number of other fixes, cleanups and smaller enhancements"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
sched/cputime: Fix steal_account_process_tick() to always return jiffies
sched/deadline: Remove dl_new from struct sched_dl_entity
Revert "kbuild: Add option to turn incompatible pointer check into error"
sched/deadline: Remove superfluous call to switched_to_dl()
sched/debug: Fix preempt_disable_ip recording for preempt_disable()
sched, time: Switch VIRT_CPU_ACCOUNTING_GEN to jiffy granularity
time, acct: Drop irq save & restore from __acct_update_integrals()
acct, time: Change indentation in __acct_update_integrals()
sched, time: Remove non-power-of-two divides from __acct_update_integrals()
sched/rt: Kick RT bandwidth timer immediately on start up
sched/debug: Add deadline scheduler bandwidth ratio to /proc/sched_debug
sched/debug: Move sched_domain_sysctl to debug.c
sched/debug: Move the /sys/kernel/debug/sched_features file setup into debug.c
sched/rt: Fix PI handling vs. sched_setscheduler()
sched/core: Remove duplicated sched_group_set_shares() prototype
sched/fair: Consolidate nohz CPU load update code
sched/fair: Avoid using decay_load_missed() with a negative value
sched/deadline: Always calculate end of period on sched_yield()
sched/cgroup: Fix cgroup entity load tracking tear-down
rcu: Use simple wait queues where possible in rcutree
...
Linus Torvalds [Tue, 15 Mar 2016 01:43:51 +0000 (18:43 -0700)]
Merge branch 'ras-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull RAS updates from Ingo Molnar:
"Various RAS updates:
- AMD MCE support updates for future CPUs, fixes and 'SMCA' (Scalable
MCA) error decoding support (Aravind Gopalakrishnan)
- x86 memcpy_mcsafe() support, to enable smart(er) hardware error
recovery in NVDIMM drivers, based on an extension of the x86
exception handling code. (Tony Luck)"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
EDAC/sb_edac: Fix computation of channel address
x86/mm, x86/mce: Add memcpy_mcsafe()
x86/mce/AMD: Document some functionality
x86/mce: Clarify comments regarding deferred error
x86/mce/AMD: Fix logic to obtain block address
x86/mce/AMD, EDAC: Enable error decoding of Scalable MCA errors
x86/mce: Move MCx_CONFIG MSR definitions
x86/mce: Check for faults tagged in EXTABLE_CLASS_FAULT exception table entries
x86/mm: Expand the exception table logic to allow new handling options
x86/mce/AMD: Set MCAX Enable bit
x86/mce/AMD: Carve out threshold block preparation
x86/mce/AMD: Fix LVT offset configuration for thresholding
x86/mce/AMD: Reduce number of blocks scanned per bank
x86/mce/AMD: Do not perform shared bank check for future processors
x86/mce: Fix order of AMD MCE init function call
Linus Torvalds [Tue, 15 Mar 2016 00:58:53 +0000 (17:58 -0700)]
Merge branch 'perf-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Main kernel side changes:
- Big reorganization of the x86 perf support code. The old code grew
organically deep inside arch/x86/kernel/cpu/perf* and its naming
became somewhat messy.
The new location is under arch/x86/events/, using the following
cleaner hierarchy of source code files:
perf/x86: Move perf_event.c .................. => x86/events/core.c
perf/x86: Move perf_event_amd.c .............. => x86/events/amd/core.c
perf/x86: Move perf_event_amd_ibs.c .......... => x86/events/amd/ibs.c
perf/x86: Move perf_event_amd_iommu.[ch] ..... => x86/events/amd/iommu.[ch]
perf/x86: Move perf_event_amd_uncore.c ....... => x86/events/amd/uncore.c
perf/x86: Move perf_event_intel_bts.c ........ => x86/events/intel/bts.c
perf/x86: Move perf_event_intel.c ............ => x86/events/intel/core.c
perf/x86: Move perf_event_intel_cqm.c ........ => x86/events/intel/cqm.c
perf/x86: Move perf_event_intel_cstate.c ..... => x86/events/intel/cstate.c
perf/x86: Move perf_event_intel_ds.c ......... => x86/events/intel/ds.c
perf/x86: Move perf_event_intel_lbr.c ........ => x86/events/intel/lbr.c
perf/x86: Move perf_event_intel_pt.[ch] ...... => x86/events/intel/pt.[ch]
perf/x86: Move perf_event_intel_rapl.c ....... => x86/events/intel/rapl.c
perf/x86: Move perf_event_intel_uncore.[ch] .. => x86/events/intel/uncore.[ch]
perf/x86: Move perf_event_intel_uncore_nhmex.c => x86/events/intel/uncore_nmhex.c
perf/x86: Move perf_event_intel_uncore_snb.c => x86/events/intel/uncore_snb.c
perf/x86: Move perf_event_intel_uncore_snbep.c => x86/events/intel/uncore_snbep.c
perf/x86: Move perf_event_knc.c .............. => x86/events/intel/knc.c
perf/x86: Move perf_event_p4.c ............... => x86/events/intel/p4.c
perf/x86: Move perf_event_p6.c ............... => x86/events/intel/p6.c
perf/x86: Move perf_event_msr.c .............. => x86/events/msr.c
(Borislav Petkov)
- Update various x86 PMU constraint and hw support details (Stephane
Eranian)
- Optimize kprobes for BPF execution (Martin KaFai Lau)
- Rewrite, refactor and fix the Intel uncore PMU driver code (Thomas
Gleixner)
- Rewrite, refactor and fix the Intel RAPL PMU code (Thomas Gleixner)
- Various fixes and smaller cleanups.
There are lots of perf tooling updates as well. A few highlights:
perf report/top:
- Hierarchy histogram mode for 'perf top' and 'perf report',
showing multiple levels, one per --sort entry: (Namhyung Kim)
On a mostly idle system:
# perf top --hierarchy -s comm,dso
Then expand some levels and use 'P' to take a snapshot:
# cat perf.hist.0
- 92.32% perf
58.20% perf
22.29% libc-2.22.so
5.97% [kernel]
4.18% libelf-0.165.so
1.69% [unknown]
- 4.71% qemu-system-x86
3.10% [kernel]
1.60% qemu-system-x86_64 (deleted)
+ 2.97% swapper
#
- Add 'L' hotkey to dynamicly set the percent threshold for
histogram entries and callchains, i.e. dynamicly do what the
--percent-limit command line option to 'top' and 'report' does.
(Namhyung Kim)
perf mem:
- Allow specifying events via -e in 'perf mem record', also listing
what events can be specified via 'perf mem record -e list' (Jiri
Olsa)
perf record:
- Add 'perf record' --all-user/--all-kernel options, so that one
can tell that all the events in the command line should be
restricted to the user or kernel levels (Jiri Olsa), i.e.:
perf record -e cycles:u,instructions:u
is equivalent to:
perf record --all-user -e cycles,instructions
- Make 'perf record' collect CPU cache info in the perf.data file header:
$ perf record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ]
$ perf report --header-only -I | tail -10 | head -8
# CPU cache info:
# L1 Data 32K [0-1]
# L1 Instruction 32K [0-1]
# L1 Data 32K [2-3]
# L1 Instruction 32K [2-3]
# L2 Unified 256K [0-1]
# L2 Unified 256K [2-3]
# L3 Unified 4096K [0-3]
Will be used in 'perf c2c' and eventually in 'perf diff' to
allow, for instance running the same workload in multiple
machines and then when using 'diff' show the hardware difference.
(Jiri Olsa)
- Improved support for Java, using the JVMTI agent library to do
jitdumps that then will be inserted in synthesized
PERF_RECORD_MMAP2 events via 'perf inject' pointed to synthesized
ELF files stored in ~/.debug and keyed with build-ids, to allow
symbol resolution and even annotation with source line info, see
the changeset comments to see how to use it (Stephane Eranian)
perf script/trace:
- Decode data_src values (e.g. perf.data files generated by 'perf
mem record') in 'perf script': (Jiri Olsa)
# perf script
perf 693 [1] 4.088652: 1 cpu/mem-loads,ldlat=30/P:
ffff88007d0b0f40 68100142 L1 hit|SNP None|TLB L1 or L2 hit|LCK No <SNIP>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
- Improve support to 'data_src', 'weight' and 'addr' fields in
'perf script' (Jiri Olsa)
- Handle empty print fmts in 'perf script -s' i.e. when running
python or perl scripts (Taeung Song)
perf stat:
- 'perf stat' now shows shadow metrics (insn per cycle, etc) in
interval mode too. E.g:
# perf stat -I 1000 -e instructions,cycles sleep 1
# time counts unit events
1.
000215928 519,620 instructions # 0.69 insn per cycle
1.
000215928 752,003 cycles
<SNIP>
- Port 'perf kvm stat' to PowerPC (Hemant Kumar)
- Implement CSV metrics output in 'perf stat' (Andi Kleen)
perf BPF support:
- Support converting data from bpf events in 'perf data' (Wang Nan)
- Print bpf-output events in 'perf script': (Wang Nan).
# perf record -e bpf-output/no-inherit,name=evt/ -e ./test_bpf_output_3.c/map:channel.event=evt/ usleep 1000
# perf script
usleep 4882 21384.532523: evt:
ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
#
- Add API to set values of map entries in a BPF object, be it
individual map slots or ranges (Wang Nan)
- Introduce support for the 'bpf-output' event (Wang Nan)
- Add glue to read perf events in a BPF program (Wang Nan)
- Improve support for bpf-output events in 'perf trace' (Wang Nan)
... and tons of other changes as well - see the shortlog and git log
for details!"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (342 commits)
perf stat: Add --metric-only support for -A
perf stat: Implement --metric-only mode
perf stat: Document CSV format in manpage
perf hists browser: Check sort keys before hot key actions
perf hists browser: Allow thread filtering for comm sort key
perf tools: Add sort__has_comm variable
perf tools: Recalc total periods using top-level entries in hierarchy
perf tools: Remove nr_sort_keys field
perf hists browser: Cleanup hist_browser__fprintf_hierarchy_entry()
perf tools: Remove hist_entry->fmt field
perf tools: Fix command line filters in hierarchy mode
perf tools: Add more sort entry check functions
perf tools: Fix hist_entry__filter() for hierarchy
perf jitdump: Build only on supported archs
tools lib traceevent: Add '~' operation within arg_num_eval()
perf tools: Omit unnecessary cast in perf_pmu__parse_scale
perf tools: Pass perf_hpp_list all the way through setup_sort_list
perf tools: Fix perf script python database export crash
perf jitdump: DWARF is also needed
perf bench mem: Prepare the x86-64 build for upstream memcpy_mcsafe() changes
...
Linus Torvalds [Mon, 14 Mar 2016 23:58:50 +0000 (16:58 -0700)]
Merge branch 'mm-readonly-for-linus' of git://git./linux/kernel/git/tip/tip
Pull read-only kernel memory updates from Ingo Molnar:
"This tree adds two (security related) enhancements to the kernel's
handling of read-only kernel memory:
- extend read-only kernel memory to a new class of formerly writable
kernel data: 'post-init read-only memory' via the __ro_after_init
attribute, and mark the ARM and x86 vDSO as such read-only memory.
This kind of attribute can be used for data that requires a once
per bootup initialization sequence, but is otherwise never modified
after that point.
This feature was based on the work by PaX Team and Brad Spengler.
(by Kees Cook, the ARM vDSO bits by David Brown.)
- make CONFIG_DEBUG_RODATA always enabled on x86 and remove the
Kconfig option. This simplifies the kernel and also signals that
read-only memory is the default model and a first-class citizen.
(Kees Cook)"
* 'mm-readonly-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ARM/vdso: Mark the vDSO code read-only after init
x86/vdso: Mark the vDSO code read-only after init
lkdtm: Verify that '__ro_after_init' works correctly
arch: Introduce post-init read-only memory
x86/mm: Always enable CONFIG_DEBUG_RODATA and remove the Kconfig option
mm/init: Add 'rodata=off' boot cmdline parameter to disable read-only kernel mappings
asm-generic: Consolidate mark_rodata_ro()
Linus Torvalds [Mon, 14 Mar 2016 23:31:41 +0000 (16:31 -0700)]
Merge branch 'mm-pat-for-linus' of git://git./linux/kernel/git/tip/tip
Pull dma_*_writecombine rename from Ingo Molnar:
"Rename dma_*_writecombine() to dma_*_wc()
This is a tree-wide API rename, to move the dma_*() write-combining
APIs closer in name to their usual API families. (The old API names
are kept as compatibility wrappers to not introduce extra breakage.)
The patch was Coccinelle generated"
* 'mm-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
dma, mm/pat: Rename dma_*_writecombine() to dma_*_wc()
Linus Torvalds [Mon, 14 Mar 2016 22:50:44 +0000 (15:50 -0700)]
Merge branch 'locking-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking changes from Ingo Molnar:
"Various updates:
- Futex scalability improvements: remove page lock use for shared
futex get_futex_key(), which speeds up 'perf bench futex hash'
benchmarks by over 40% on a 60-core Westmere. This makes anon-mem
shared futexes perform close to private futexes. (Mel Gorman)
- lockdep hash collision detection and fix (Alfredo Alvarez
Fernandez)
- lockdep testing enhancements (Alfredo Alvarez Fernandez)
- robustify lockdep init by using hlists (Andrew Morton, Andrey
Ryabinin)
- mutex and csd_lock micro-optimizations (Davidlohr Bueso)
- small x86 barriers tweaks (Michael S Tsirkin)
- qspinlock updates (Waiman Long)"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
locking/csd_lock: Use smp_cond_acquire() in csd_lock_wait()
locking/csd_lock: Explicitly inline csd_lock*() helpers
futex: Replace barrier() in unqueue_me() with READ_ONCE()
locking/lockdep: Detect chain_key collisions
locking/lockdep: Prevent chain_key collisions
tools/lib/lockdep: Fix link creation warning
tools/lib/lockdep: Add tests for AA and ABBA locking
tools/lib/lockdep: Add userspace version of READ_ONCE()
tools/lib/lockdep: Fix the build on recent kernels
locking/qspinlock: Move __ARCH_SPIN_LOCK_UNLOCKED to qspinlock_types.h
locking/mutex: Allow next waiter lockless wakeup
locking/pvqspinlock: Enable slowpath locking count tracking
locking/qspinlock: Use smp_cond_acquire() in pending code
locking/pvqspinlock: Move lock stealing count tracking code into pv_queued_spin_steal_lock()
locking/mcs: Fix mcs_spin_lock() ordering
futex: Remove requirement for lock_page() in get_futex_key()
futex: Rename barrier references in ordering guarantees
locking/atomics: Update comment about READ_ONCE() and structures
locking/lockdep: Eliminate lockdep_init()
locking/lockdep: Convert hash tables to hlists
...
Linus Torvalds [Mon, 14 Mar 2016 22:15:51 +0000 (15:15 -0700)]
Merge branch 'core-resources-for-linus' of git://git./linux/kernel/git/tip/tip
Pull ram resource handling changes from Ingo Molnar:
"Core kernel resource handling changes to support NVDIMM error
injection.
This tree introduces a new I/O resource type, IORESOURCE_SYSTEM_RAM,
for System RAM while keeping the current IORESOURCE_MEM type bit set
for all memory-mapped ranges (including System RAM) for backward
compatibility.
With this resource flag it no longer takes a strcmp() loop through the
resource tree to find "System RAM" resources.
The new resource type is then used to extend ACPI/APEI error injection
facility to also support NVDIMM"
* 'core-resources-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ACPI/EINJ: Allow memory error injection to NVDIMM
resource: Kill walk_iomem_res()
x86/kexec: Remove walk_iomem_res() call with GART type
x86, kexec, nvdimm: Use walk_iomem_res_desc() for iomem search
resource: Add walk_iomem_res_desc()
memremap: Change region_intersects() to take @flags and @desc
arm/samsung: Change s3c_pm_run_res() to use System RAM type
resource: Change walk_system_ram() to use System RAM type
drivers: Initialize resource entry to zero
xen, mm: Set IORESOURCE_SYSTEM_RAM to System RAM
kexec: Set IORESOURCE_SYSTEM_RAM for System RAM
arch: Set IORESOURCE_SYSTEM_RAM flag for System RAM
ia64: Set System RAM type and descriptor
x86/e820: Set System RAM type and descriptor
resource: Add I/O resource descriptor
resource: Handle resource flags properly
resource: Add System RAM resource type
Linus Torvalds [Mon, 14 Mar 2016 04:28:54 +0000 (21:28 -0700)]
Linux 4.5
Linus Torvalds [Sun, 13 Mar 2016 20:04:46 +0000 (13:04 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"Another round of MIPS fixes for 4.5:
- Fix JZ4780 build with DEBUG_ZBOOT and MACH_JZ4780
- Fix build with DEBUG_ZBOOT and MACH_JZ4780
- Fix issue with uninitialised temp_foreign_map
- Fix awk regex compile failure with certain versions of awk. At
this time, the sole user, ld-ifversion, is only used on MIPS"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: smp.c: Fix uninitialised temp_foreign_map
MIPS: Fix build error when SMP is used without GIC
ld-version: Fix awk regex compile failure
MIPS: Fix build with DEBUG_ZBOOT and MACH_JZ4780
James Hogan [Fri, 4 Mar 2016 10:10:51 +0000 (10:10 +0000)]
MIPS: smp.c: Fix uninitialised temp_foreign_map
When calculate_cpu_foreign_map() recalculates the cpu_foreign_map
cpumask it uses the local variable temp_foreign_map without initialising
it to zero. Since the calculation only ever sets bits in this cpumask
any existing bits at that memory location will remain set and find their
way into cpu_foreign_map too. This could potentially lead to cache
operations suboptimally doing smp calls to multiple VPEs in the same
core, even though the VPEs share primary caches.
Therefore initialise temp_foreign_map using cpumask_clear() before use.
Fixes:
cccf34e9411c ("MIPS: c-r4k: Fix cache flushing for MT cores")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12759/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Hauke Mehrtens [Sun, 6 Mar 2016 21:28:56 +0000 (22:28 +0100)]
MIPS: Fix build error when SMP is used without GIC
The MIPS_GIC_IPI should only be selected when MIPS_GIC is also
selected, otherwise it results in a compile error. smp-gic.c uses some
functions from include/linux/irqchip/mips-gic.h like
plat_ipi_call_int_xlate() which are only added to the header file when
MIPS_GIC is set. The Lantiq SoC does not use the GIC, but supports SMP.
The calls top the functions from smp-gic.c are already protected by
some #ifdefs
The first part of this was introduced in commit
72e20142b2bf ("MIPS:
Move GIC IPI functions out of smp-cmp.c")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: stable@vger.kernel.org # v3.15+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12774/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
James Hogan [Tue, 8 Mar 2016 16:47:53 +0000 (16:47 +0000)]
ld-version: Fix awk regex compile failure
The ld-version.sh script fails on some versions of awk with the
following error, resulting in build failures for MIPS:
awk: scripts/ld-version.sh: line 4: regular expression compile failed (missing '(')
This is due to the regular expression ".*)", meant to strip off the
beginning of the ld version string up to the close bracket, however
brackets have a meaning in regular expressions, so lets escape it so
that awk doesn't expect a corresponding open bracket.
Fixes:
ccbef1674a15 ("Kbuild, lto: add ld-version and ld-ifversion ...")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Cc: Michal Marek <mmarek@suse.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kbuild@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # 4.4.x-
Patchwork: https://patchwork.linux-mips.org/patch/12838/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Aaro Koskinen [Mon, 7 Mar 2016 22:06:36 +0000 (00:06 +0200)]
MIPS: Fix build with DEBUG_ZBOOT and MACH_JZ4780
Ingenic SoC declares ZBOOT support, but debug definitions are missing
for MACH_JZ4780 resulting in a build failure when DEBUG_ZBOOT is set.
The UART addresses are same as with JZ4740, so fix by covering JZ4780
with those as well.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12830/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Linus Torvalds [Sun, 13 Mar 2016 04:18:54 +0000 (20:18 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block merge fix from Jens Axboe.
This fixes the block segment counting bug and resulting sg overrun
reported by Kent Overstreet, introduced with the last block pull.
* 'for-linus' of git://git.kernel.dk/linux-block:
block: don't optimize for non-cloned bio in bio_get_last_bvec()
Linus Torvalds [Sun, 13 Mar 2016 04:09:25 +0000 (20:09 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"This fixes 3 FPU handling related bugs, an EFI boot crash and a
runtime warning.
The EFI fix arrived late but I didn't want to delay it to after v4.5
because the effects are pretty bad for the systems that are affected
by it"
[ Actually, I don't think the EFI fix really matters yet, because we
haven't switched to the separate EFI page tables in mainline yet ]
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Fix boot crash by always mapping boot service regions into new EFI page tables
x86/fpu: Fix eager-FPU handling on legacy FPU machines
x86/delay: Avoid preemptible context checks in delay_mwaitx()
x86/fpu: Revert ("x86/fpu: Disable AVX when eagerfpu is off")
x86/fpu: Fix 'no387' regression
Linus Torvalds [Sun, 13 Mar 2016 01:14:07 +0000 (17:14 -0800)]
Merge git://git./linux/kernel/git/nab/target-pending
Pull SCSI target bug fix from Nicholas Bellinger:
"Here is an outstanding target-core bug-fix for v4.5 code."
This patch addresses a recent Task Management (TMR) regression related
to larger set of multi-port LUN_RESET bug-fixes in v4.5-rc5.
It drops a left-over target_put_sess_cmd() of se_cmd->cmd_kref within
ABORT_TASK failure path, once a se_cmd descriptor has already
completed posting response to fabric driver logic, and must be skipped
during normal ABORT_TASK se_cmd->tag lookup"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
target: Drop incorrect ABORT_TASK put for completed commands
Ming Lei [Sat, 12 Mar 2016 14:56:19 +0000 (22:56 +0800)]
block: don't optimize for non-cloned bio in bio_get_last_bvec()
For !BIO_CLONED bio, we can use .bi_vcnt safely, but it
doesn't mean we can just simply return .bi_io_vec[.bi_vcnt - 1]
because the start postion may have been moved in the middle of
the bvec, such as splitting in the middle of bvec.
Fixes:
7bcd79ac50d9(block: bio: introduce helpers to get the 1st and last bvec)
Cc: stable@vger.kernel.org
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Matt Fleming [Fri, 11 Mar 2016 11:19:23 +0000 (11:19 +0000)]
x86/efi: Fix boot crash by always mapping boot service regions into new EFI page tables
Some machines have EFI regions in page zero (physical address
0x00000000) and historically that region has been added to the e820
map via trim_bios_range(), and ultimately mapped into the kernel page
tables. It was not mapped via efi_map_regions() as one would expect.
Alexis reports that with the new separate EFI page tables some boot
services regions, such as page zero, are not mapped. This triggers an
oops during the SetVirtualAddressMap() runtime call.
For the EFI boot services quirk on x86 we need to memblock_reserve()
boot services regions until after SetVirtualAddressMap(). Doing that
while respecting the ownership of regions that may have already been
reserved by the kernel was the motivation behind this commit:
7d68dc3f1003 ("x86, efi: Do not reserve boot services regions within reserved areas")
That patch was merged at a time when the EFI runtime virtual mappings
were inserted into the kernel page tables as described above, and the
trick of setting ->numpages (and hence the region size) to zero to
track regions that should not be freed in efi_free_boot_services()
meant that we never mapped those regions in efi_map_regions(). Instead
we were relying solely on the existing kernel mappings.
Now that we have separate page tables we need to make sure the EFI
boot services regions are mapped correctly, even if someone else has
already called memblock_reserve(). Instead of stashing a tag in
->numpages, set the EFI_MEMORY_RUNTIME bit of ->attribute. Since it
generally makes no sense to mark a boot services region as required at
runtime, it's pretty much guaranteed the firmware will not have
already set this bit.
For the record, the specific circumstances under which Alexis
triggered this bug was that an EFI runtime driver on his machine was
responding to the EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event during
SetVirtualAddressMap().
The event handler for this driver looks like this,
sub rsp,0x28
lea rdx,[rip+0x2445] # 0xaa948720
mov ecx,0x4
call func_aa9447c0 ; call to ConvertPointer(4, & 0xaa948720)
mov r11,QWORD PTR [rip+0x2434] # 0xaa948720
xor eax,eax
mov BYTE PTR [r11+0x1],0x1
add rsp,0x28
ret
Which is pretty typical code for an EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE
handler. The "mov r11, QWORD PTR [rip+0x2424]" was the faulting
instruction because ConvertPointer() was being called to convert the
address 0x0000000000000000, which when converted is left unchanged and
remains 0x0000000000000000.
The output of the oops trace gave the impression of a standard NULL
pointer dereference bug, but because we're accessing physical
addresses during ConvertPointer(), it wasn't. EFI boot services code
is stored at that address on Alexis' machine.
Reported-by: Alexis Murzeau <amurzeau@gmail.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raphael Hertzog <hertzog@debian.org>
Cc: Roger Shimizu <rogershimizu@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1457695163-29632-2-git-send-email-matt@codeblueprint.co.uk
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=815125
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Borislav Petkov [Fri, 11 Mar 2016 11:32:06 +0000 (12:32 +0100)]
x86/fpu: Fix eager-FPU handling on legacy FPU machines
i486 derived cores like Intel Quark support only the very old,
legacy x87 FPU (FSAVE/FRSTOR, CPUID bit FXSR is not set), and
our FPU code wasn't handling the saving and restoring there
properly in the 'eagerfpu' case.
So after we made eagerfpu the default for all CPU types:
58122bf1d856 x86/fpu: Default eagerfpu=on on all CPUs
these old FPU designs broke. First, Andy Shevchenko reported a splat:
WARNING: CPU: 0 PID: 823 at arch/x86/include/asm/fpu/internal.h:163 fpu__clear+0x8c/0x160
which was us trying to execute FXRSTOR on those machines even though
they don't support it.
After taking care of that, Bryan O'Donoghue reported that a simple FPU
test still failed because we weren't initializing the FPU state properly
on those machines.
Take care of all that.
Reported-and-tested-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/20160311113206.GD4312@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Sat, 12 Mar 2016 00:34:18 +0000 (16:34 -0800)]
Merge tag 'for-linus-
20160311' of git://git.infradead.org/linux-mtd
Pull MTD fixes from Brian Norris:
"Late MTD fix for v4.5:
- A simple error code handling fix for the NAND ECC test; this was a
regression in v4.5-rc1
- A MAINTAINERS update, which might as well go in ASAP"
* tag 'for-linus-
20160311' of git://git.infradead.org/linux-mtd:
MAINTAINERS: add a maintainer for the NAND subsystem
mtd: nand: tests: fix regression introduced in mtd_nandectest
Linus Torvalds [Sat, 12 Mar 2016 00:19:23 +0000 (16:19 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm/i915 fixes from Dave Airlie:
"Just two i915 regression fixes, that should be it from me"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/i915: Actually retry with bit-banging after GMBUS timeout
drm/i915: Fix bogus dig_port_map[] assignment for pre-HSW
Matthew Dawson [Fri, 11 Mar 2016 21:08:07 +0000 (13:08 -0800)]
mm/mempool: avoid KASAN marking mempool poison checks as use-after-free
When removing an element from the mempool, mark it as unpoisoned in KASAN
before verifying its contents for SLUB/SLAB debugging. Otherwise KASAN
will flag the reads checking the element use-after-free writes as
use-after-free reads.
Signed-off-by: Matthew Dawson <matthew@mjdsystems.ca>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 11 Mar 2016 20:35:54 +0000 (12:35 -0800)]
Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Two more fixes for 4.5:
- One is a fix for OMAP that is urgently needed to avoid DRA7xx chips
from premature aging, by always keeping the Ethernet clock enabled.
- The other solves a I/O memory layout issue on Armada, where SROM
and PCI memory windows were conflicting in some configurations"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: mvebu: fix overlap of Crypto SRAM with PCIe memory window
ARM: dts: dra7: do not gate cpsw clock due to errata i877
ARM: OMAP2+: hwmod: Introduce ti,no-idle dt property
Linus Torvalds [Fri, 11 Mar 2016 20:32:02 +0000 (12:32 -0800)]
Merge tag 'media/v4.5-5' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fix from Mauro Carvalho Chehab:
"One last time fix: It adds a code that prevents some media tools like
media-ctl to hide some entities that have their IDs out of the range
expected by those apps"
* tag 'media/v4.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] media-device: map new functions into old types for legacy API
Thomas Petazzoni [Tue, 8 Mar 2016 15:59:57 +0000 (16:59 +0100)]
ARM: mvebu: fix overlap of Crypto SRAM with PCIe memory window
When the Crypto SRAM mappings were added to the Device Tree files
describing the Armada XP boards in commit
c466d997bb16 ("ARM: mvebu:
define crypto SRAM ranges for all armada-xp boards"), the fact that
those mappings were overlaping with the PCIe memory aperture was
overlooked. Due to this, we currently have for all Armada XP platforms
a situation that looks like this:
Memory mapping on Armada XP boards with internal registers at
0xf1000000:
- 0x00000000 -> 0xf0000000 3.75G RAM
- 0xf0000000 -> 0xf1000000 16M NOR flashes (AXP GP / AXP DB)
- 0xf1000000 -> 0xf1100000 1M internal registers
- 0xf8000000 -> 0xffe0000 126M PCIe memory aperture
- 0xf8100000 -> 0xf8110000 64KB Crypto SRAM #0 => OVERLAPS WITH PCIE !
- 0xf8110000 -> 0xf8120000 64KB Crypto SRAM #1 => OVERLAPS WITH PCIE !
- 0xffe00000 -> 0xfff00000 1M PCIe I/O aperture
- 0xfff0000 -> 0xffffffff 1M BootROM
The overlap means that when PCIe devices are added, depending on their
memory window needs, they might or might not be mapped into the
physical address space. Indeed, they will not be mapped if the area
allocated in the PCIe memory aperture by the PCI core overlaps with
one of the Crypto SRAM. Typically, a Intel IGB PCIe NIC that needs 8MB
of PCIe memory will see its PCIe memory window allocated from
0xf80000000 for 8MB, which overlaps with the Crypto SRAM windows. Due
to this, the PCIe window is not created, and any attempt to access the
PCIe window makes the kernel explode:
[ 3.302213] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 3.307841] pci 0000:00:09.0: enabling device (0140 -> 0143)
[ 3.313539] mvebu_mbus: cannot add window '4:f8', conflicts with another window
[ 3.320870] mvebu-pcie soc:pcie-controller: Could not create MBus window at [mem 0xf8000000-0xf87fffff]: -22
[ 3.330811] Unhandled fault: external abort on non-linefetch (0x1008) at 0xf08c0018
This problem does not occur on Armada 370 boards, because we use the
following memory mapping (for boards that have internal registers at
0xf1000000):
- 0x00000000 -> 0xf0000000 3.75G RAM
- 0xf0000000 -> 0xf1000000 16M NOR flashes (AXP GP / AXP DB)
- 0xf1000000 -> 0xf1100000 1M internal registers
- 0xf1100000 -> 0xf1110000 64KB Crypto SRAM #0 => OK !
- 0xf8000000 -> 0xffe0000 126M PCIe memory
- 0xffe00000 -> 0xfff00000 1M PCIe I/O
- 0xfff0000 -> 0xffffffff 1M BootROM
Obviously, the solution is to align the location of the Crypto SRAM
mappings of Armada XP to be similar with the ones on Armada 370, i.e
have them between the "internal registers" area and the beginning of
the PCIe aperture.
However, we have a special case with the OpenBlocks AX3-4 platform,
which has a 128 MB NOR flash. Currently, this NOR flash is mapped from
0xf0000000 to 0xf8000000. This is possible because on OpenBlocks
AX3-4, the internal registers are not at 0xf1000000. And this explains
why the Crypto SRAM mappings were not configured at the same place on
Armada XP.
Hence, the solution is two-fold:
(1) Move the NOR flash mapping on Armada XP OpenBlocks AX3-4 from
0xe8000000 to 0xf0000000. This frees the 0xf0000000 ->
0xf80000000 space.
(2) Move the Crypto SRAM mappings on Armada XP to be similar to
Armada 370 (except of course that Armada XP has two Crypto SRAM
and not one).
After this patch, the memory mapping on Armada XP boards with
registers at 0xf1 is:
- 0x00000000 -> 0xf0000000 3.75G RAM
- 0xf0000000 -> 0xf1000000 16M NOR flashes (AXP GP / AXP DB)
- 0xf1000000 -> 0xf1100000 1M internal registers
- 0xf1100000 -> 0xf1110000 64KB Crypto SRAM #0
- 0xf1110000 -> 0xf1120000 64KB Crypto SRAM #1
- 0xf8000000 -> 0xffe0000 126M PCIe memory
- 0xffe00000 -> 0xfff00000 1M PCIe I/O
- 0xfff0000 -> 0xffffffff 1M BootROM
And the memory mapping for the special case of the OpenBlocks AX3-4
(internal registers at 0xd0000000, NOR of 128 MB):
- 0x00000000 -> 0xc0000000 3G RAM
- 0xd0000000 -> 0xd1000000 1M internal registers
- 0xe800000 -> 0xf0000000 128M NOR flash
- 0xf1100000 -> 0xf1110000 64KB Crypto SRAM #0
- 0xf1110000 -> 0xf1120000 64KB Crypto SRAM #1
- 0xf8000000 -> 0xffe0000 126M PCIe memory
- 0xffe00000 -> 0xfff00000 1M PCIe I/O
- 0xfff0000 -> 0xffffffff 1M BootROM
Fixes:
c466d997bb16 ("ARM: mvebu: define crypto SRAM ranges for all armada-xp boards")
Reported-by: Phil Sutter <phil@nwl.cc>
Cc: Phil Sutter <phil@nwl.cc>
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Linus Torvalds [Fri, 11 Mar 2016 18:57:18 +0000 (10:57 -0800)]
Merge tag 'dmaengine-fix-4.5' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"Two fixes showed up in last few days, and they should be included in
4.5. Summary:
Two more late fixes to drivers, nothing major here:
- A memory leak fix in fsdma unmap the dma descriptors on freeup
- A fix in xdmac driver for residue calculation of dma descriptor"
* tag 'dmaengine-fix-4.5' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: at_xdmac: fix residue computation
dmaengine: fsldma: fix memory leak
Linus Torvalds [Fri, 11 Mar 2016 18:45:03 +0000 (10:45 -0800)]
Merge tag 'pm+acpi-4.5-final' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"Two more fixes for issues introduced recently, one in the generic
device properties framework and one in ACPICA.
Specifics:
- Revert a recent ACPICA commit that has been reverted upstream,
because it caused problems to happen on user systems and the
problem it attempted to address will not be relevant any more after
upcoming ACPI specification changes (Bob Moore).
- Fix crash in the generic device properties framework introduced by
a recent change that forgot to check pointers against error values
in addition to checking them against NULL (Heikki Krogerus)"
* tag 'pm+acpi-4.5-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
device property: fwnode->secondary may contain ERR_PTR(-ENODEV)
ACPICA: Revert "Parser: Fix for SuperName method invocation"
Linus Torvalds [Fri, 11 Mar 2016 18:21:32 +0000 (10:21 -0800)]
Merge tag 'xfs-for-linus-4.5-rc7' of git://git./linux/kernel/git/dgc/linux-xfs
Pull xfs fixes from Dave Chinner:
"This is a fix for a regression introduced in 4.5-rc1 by the new torn
log write detection code. The regression only affects people moving a
clean filesystem between machines/kernels of different architecture
(such as changing between 32 bit and 64 bit kernels), but this is the
recommended (and only!) safe way to migrate a filesystem between
architectures so we really need to ensure it works.
The changes are larger than I'd prefer right at the end of the release
cycle, but the majority of the change is just factoring code to enable
the detection of a clean log at the correct time to avoid this issue.
Changes:
- Only perform torn log write detection on dirty logs. This prevents
failures being detected due to a clean filesystem being moved
between machines or kernels of different architectures (e.g. 32 ->
64 bit, BE -> LE, etc). This fixes a regression introduced by the
torn log write detection in 4.5-rc1"
* tag 'xfs-for-linus-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
xfs: only run torn log write detection on dirty logs
xfs: refactor in-core log state update to helper
xfs: refactor unmount record detection into helper
xfs: separate log head record discovery from verification
Linus Torvalds [Fri, 11 Mar 2016 18:13:49 +0000 (10:13 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"A couple of fixes: Fix for my dumb braino in ncpfs and a long-standing
breakage on recovery from failed rename() in jffs2"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
jffs2: reduce the breakage on recovery from halfway failed rename()
ncpfs: fix a braino in OOM handling in ncp_fill_cache()
Rafael J. Wysocki [Fri, 11 Mar 2016 13:22:54 +0000 (14:22 +0100)]
Merge branches 'device-properties-fixes' and 'acpica-fixes'
* device-properties-fixes:
device property: fwnode->secondary may contain ERR_PTR(-ENODEV)
* acpica-fixes:
ACPICA: Revert "Parser: Fix for SuperName method invocation"
Ingo Molnar [Fri, 11 Mar 2016 08:40:25 +0000 (09:40 +0100)]
Merge tag 'perf-core-for-mingo-
20160310' of git://git./linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Implement 'perf stat --metric-only' (Andi Kleen)
- Fix perf script python database export crash (Chris Phlipot)
Infrastructure changes:
- perf top/report --hierarchy assorted fixes for problems introduced in this
perf/core cycle (Namhyung Kim)
- Support '~' operation in libtraceevent (Steven Rosted)
Build fixes:
- Fix bulding of jitdump on opensuse on ubuntu systems when the DWARF
devel files are not installed (Arnaldo Carvalho de Melo)
- Do not try building jitdump on unsupported arches (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ville Syrjälä [Mon, 7 Mar 2016 15:56:57 +0000 (17:56 +0200)]
drm/i915: Actually retry with bit-banging after GMBUS timeout
After the GMBUS transfer times out, we set force_bit=1 and
return -EAGAIN expecting the i2c core to call the .master_xfer
hook again so that we will retry the same transfer via bit-banging.
This is in case the gmbus hardware is somehow faulty.
Unfortunately we left adapter->retries to 0, meaning the i2c core
didn't actually do the retry. Let's tell the core we want one retry
when we return -EAGAIN.
Note that i2c-algo-bit also uses this retry count for some internal
retries, so we'll end up increasing those a bit as well.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes:
bffce907d640 ("drm/i915: abstract i2c bit banging fallback in gmbus xfer")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457366220-29409-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit
8b1f165a4a8f64c28cf42d10e1f4d3b451dedc51)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Andi Kleen [Thu, 3 Mar 2016 23:57:37 +0000 (15:57 -0800)]
perf stat: Add --metric-only support for -A
Add metric only support for -A too. This requires a new print function
that prints the metrics in the right order.
v2: Fix manpage
v3: Simplify nrcpus computation
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1457049458-28956-7-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andi Kleen [Thu, 3 Mar 2016 23:57:36 +0000 (15:57 -0800)]
perf stat: Implement --metric-only mode
Add a new mode to only print metrics. Sometimes we don't care about the
raw values, just want the computed metrics. This allows more compact
printing, so with -I each sample is only a single line. This also
allows easier plotting and processing with other tools.
The main target is with using --topdown, but it also works with -T and
standard perf stat. A few metrics are not supported.
To avoiding having to hardcode all the metrics in the code it uses a two
pass approach: first compute dummy metrics and only print the headers in
the print_metric callback. Then use the callback to print the actual
values.
There are some additional changes in the stat printout code to handle
all metrics being on a single line.
One issue is that the column code doesn't know in advance what events
are not supported by the CPU, and it would be hard to find out as this
could change based on dynamic conditions. That causes empty columns in
some cases.
The output can be fairly wide, often you may need more than 80 columns.
Example:
% perf stat -a -I 1000 --metric-only
1.
001452803 frontend cycles idle insn per cycle stalled cycles per insn branch-misses of all branches
1.
001452803 158.91% 0.66 2.39 2.92%
2.
002192321 180.63% 0.76 2.08 2.96%
3.
003088282 150.59% 0.62 2.57 2.84%
4.
004369835 196.20% 0.98 1.62 3.79%
5.
005227314 231.98% 0.84 1.90 4.71%
v2: Lots of updates.
v3: Use slightly narrower columns
v4: Add comment
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1457049458-28956-6-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andi Kleen [Thu, 3 Mar 2016 23:57:35 +0000 (15:57 -0800)]
perf stat: Document CSV format in manpage
With all the recently added fields in the perf stat CSV output we should
finally document them in the man page. Do this here.
v2: Fix fields in documentation (Jiri)
v3: fix order of fields again (Jiri)
v4: Change order again.
v5: Document more fields (Jiri)
v6: Move time stamp first
v7: More fixes (Jiri)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1457049458-28956-5-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 9 Mar 2016 14:20:53 +0000 (23:20 +0900)]
perf hists browser: Check sort keys before hot key actions
The context menu in TUI hists browser checks corresponding sort keys
when creating the menu item. But hotkey actions lacks these checks so
it can filter using incorrect info.
For example, default sort key of 'perf top' doesn't contain 'comm' or
'pid' sort key so each hist entry's thread info is not reliable. Thus
it should prohibit using thread filter on 't' key.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1457533253-21419-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 9 Mar 2016 15:14:50 +0000 (00:14 +0900)]
perf hists browser: Allow thread filtering for comm sort key
The commit
2eafd410e669 ("perf hists browser: Only 'Zoom into thread'
only when sort order has 'pid'") disabled thread filtering in hist
browser for the default sort key. However the he->thread is still valid
even if 'pid' sort key is not given. Only thing it should not use is
the pid (or tid) of the thread. So allow to filter by thread when
'comm' sort key is given and show pid only if 'pid' sort key is given.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1457536490-24084-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 9 Mar 2016 14:20:51 +0000 (23:20 +0900)]
perf tools: Add sort__has_comm variable
The sort__has_comm variable is to check whether the comm sort key is
given. This is necessary to support thread filtering in the TUI hists
browser later.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1457533253-21419-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 9 Mar 2016 13:47:02 +0000 (22:47 +0900)]
perf tools: Recalc total periods using top-level entries in hierarchy
When hierarchy mode is enabled, each entry in a hierarchy level shares
the period. IOW an upper level entry's period is the sum of lower level
entries. Thus perf uses only one of them to calculate the total period
of hists. It was lowest-level (leaf) entries but it has a problem when
it comes to filters.
If a filter is applied, entries in the same level will be filtered or
not. But upper level entries still have period of their sum including
filtered one. So total sum of upper level entries will not be same as
sum of lower level entries.
This resulted in entries having more than 100% of overhead and it can be
produced using perf top with filter(s).
Reported-and-Tested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 9 Mar 2016 13:47:01 +0000 (22:47 +0900)]
perf tools: Remove nr_sort_keys field
The nr_sort_keys field is to carry the number of sort entries in a
hpp_list or hists to determine the depth of indentation of a hist entry.
As it's only used in hierarchy mode and now we have used nr_hpp_node for
this reason, there's no need to keep it anymore. Let's get rid of it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 9 Mar 2016 13:47:00 +0000 (22:47 +0900)]
perf hists browser: Cleanup hist_browser__fprintf_hierarchy_entry()
The hist_browser__fprintf_hierarchy_entry() if to dump current output
into a file so it needs to be sync-ed with the corresponding function
hist_browser__show_hierarchy_entry(). So use hists->nr_hpp_node to
indent width and use first fmt_node to print overhead columns instead of
checking whether it's a sort entry (or dynamic entry).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 9 Mar 2016 13:46:59 +0000 (22:46 +0900)]
perf tools: Remove hist_entry->fmt field
It's not used anymore and the output format is accessed by the hpp_list
pointer instead when hierarchy is enabled. Let's get rid of it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 9 Mar 2016 13:46:58 +0000 (22:46 +0900)]
perf tools: Fix command line filters in hierarchy mode
When a command-line filter is applied in hierarchy mode, output is
broken especially when filtering on lower level. The higher level
entries doesn't show up so it's hard to see the results.
Also it needs to handle multi sort keys in a single hierarchy level.
Before:
$ perf report --hierarchy -s 'cpu,{dso,comm}' --comms swapper --stdio
...
# Overhead CPU / Shared Object+Command
# ........... ...........................
#
13.79% [kernel.vmlinux] swapper
31.71% 000
13.80% [kernel.vmlinux] swapper
0.43% [e1000e] swapper
11.89% [kernel.vmlinux] swapper
9.18% [kernel.vmlinux] swapper
After:
# Overhead CPU / Shared Object+Command
# ........... ...............................
#
33.09% 003
13.79% [kernel.vmlinux] swapper
31.71% 000
13.80% [kernel.vmlinux] swapper
0.43% [e1000e] swapper
21.90% 002
11.89% [kernel.vmlinux] swapper
13.30% 001
9.18% [kernel.vmlinux] swapper
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
projects / platform / kernel / linux-rpi.git / log