Johan Hovold [Thu, 30 Mar 2017 10:15:39 +0000 (12:15 +0200)]
NFC: nfcmrvl: fix firmware-management initialisation
commit
45dd39b974f6632222dd5cdcbea7358a077ab0b0 upstream.
The nci-device was never deregistered in the event that
fw-initialisation failed.
Fix this by moving the firmware initialisation before device
registration since the firmware work queue should be available before
registering.
Note that this depends on a recent fix that moved device-name
initialisation back to to nci_allocate_device() as the
firmware-workqueue name is now derived from the nfc-device name.
Fixes:
3194c6870158 ("NFC: nfcmrvl: add firmware download support")
Cc: Vincent Cuissard <cuissard@marvell.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Thu, 30 Mar 2017 10:15:38 +0000 (12:15 +0200)]
NFC: nfcmrvl: use nfc-device for firmware download
commit
e5834ac22948169bbd7c45996d8d4905edd20f5e upstream.
Use the nfc- rather than phy-device in firmware-management code that
needs a valid struct device.
This specifically fixes a NULL-pointer dereference in
nfcmrvl_fw_dnld_init() during registration when the underlying tty is
one end of a Unix98 pty.
Note that the driver still uses the phy device for any debugging, which
is fine for now.
Fixes:
3194c6870158 ("NFC: nfcmrvl: add firmware download support")
Cc: Vincent Cuissard <cuissard@marvell.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Thu, 30 Mar 2017 10:15:37 +0000 (12:15 +0200)]
NFC: nfcmrvl: do not use device-managed resources
commit
0cbe40112f42cf5e008f9127f6cd5952ba3946c7 upstream.
This specifically fixes resource leaks in the registration error paths.
Device-managed resources is a bad fit for this driver as devices can be
registered from the n_nci line discipline. Firstly, a tty may not even
have a corresponding device (should it be part of a Unix98 pty)
something which would lead to a NULL-pointer dereference when
registering resources.
Secondly, if the tty has a class device, its lifetime exceeds that of
the line discipline, which means that resources would leak every time
the line discipline is closed (or if registration fails).
Currently, the devres interface was only being used to request a reset
gpio despite the fact that it was already explicitly freed in
nfcmrvl_nci_unregister_dev() (along with the private data), something
which also prevented the resource leak at close.
Note that the driver treats gpio number 0 as invalid despite it being
perfectly valid. This will be addressed in a follow-up patch.
Fixes:
b2fe288eac72 ("NFC: nfcmrvl: free reset gpio")
Fixes:
4a2b947f56b3 ("NFC: nfcmrvl: add chip reset management")
Cc: Vincent Cuissard <cuissard@marvell.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Thu, 30 Mar 2017 10:15:36 +0000 (12:15 +0200)]
NFC: nfcmrvl_uart: add missing tty-device sanity check
commit
15e0c59f1535926a939d1df66d6edcf997d7c1b9 upstream.
Make sure to check the tty-device pointer before trying to access the
parent device to avoid dereferencing a NULL-pointer when the tty is one
end of a Unix98 pty.
Fixes:
e097dc624f78 ("NFC: nfcmrvl: add UART driver")
Cc: Vincent Cuissard <cuissard@marvell.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Thu, 30 Mar 2017 10:15:35 +0000 (12:15 +0200)]
NFC: fix broken device allocation
commit
20777bc57c346b6994f465e0d8261a7fbf213a09 upstream.
Commit
7eda8b8e9677 ("NFC: Use IDR library to assing NFC devices IDs")
moved device-id allocation and struct-device initialisation from
nfc_allocate_device() to nfc_register_device().
This broke just about every nfc-device-registration error path, which
continue to call nfc_free_device() that tries to put the device
reference of the now uninitialised (but zeroed) struct device:
kobject: '(null)' (
ce316420): is not initialized, yet kobject_put() is being called.
The late struct-device initialisation also meant that various work
queues whose names are derived from the nfc device name were also
misnamed:
421 root 0 SW< [(null)_nci_cmd_]
422 root 0 SW< [(null)_nci_rx_w]
423 root 0 SW< [(null)_nci_tx_w]
Move the id-allocation and struct-device initialisation back to
nfc_allocate_device() and fix up the single call site which did not use
nfc_free_device() in its error path.
Fixes:
7eda8b8e9677 ("NFC: Use IDR library to assing NFC devices IDs")
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miaoqing Pan [Tue, 27 Jun 2017 14:31:53 +0000 (17:31 +0300)]
ath9k: fix an invalid pointer dereference in ath9k_rng_stop()
commit
07246c115801c27652700e3679bb58661ef7ed65 upstream.
The bug was triggered when do suspend/resuming continuously
on Dell XPS L322X/0PJHXN version 9333 (2013) with kernel
4.12.0-041200rc4-generic. But can't reproduce on DELL
E5440 + AR9300 PCIE chips.
The warning is caused by accessing invalid pointer sc->rng_task.
sc->rng_task is not be cleared after kthread_stop(sc->rng_task)
be called in ath9k_rng_stop(). Because the kthread is stopped
before ath9k_rng_kthread() be scheduled.
So set sc->rng_task to null after kthread_stop(sc->rng_task) to
resolve this issue.
WARNING: CPU: 0 PID: 984 at linux/kernel/kthread.c:71 kthread_stop+0xf1/0x100
CPU: 0 PID: 984 Comm: NetworkManager Not tainted 4.12.0-041200rc4-generic #
201706042031
Hardware name: Dell Inc. Dell System XPS L322X/0PJHXN, BIOS A09 05/15/2013
task:
ffff950170fdda00 task.stack:
ffffa22c01538000
RIP: 0010:kthread_stop+0xf1/0x100
RSP: 0018:
ffffa22c0153b5b0 EFLAGS:
00010246
RAX:
ffffffffa6257800 RBX:
ffff950171b79560 RCX:
0000000000000000
RDX:
0000000080000000 RSI:
000000007fffffff RDI:
ffff9500ac9a9680
RBP:
ffffa22c0153b5c8 R08:
0000000000000000 R09:
0000000000000000
R10:
ffffa22c0153b648 R11:
ffff9501768004b8 R12:
ffff9500ac9a9680
R13:
ffff950171b79f70 R14:
ffff950171b78780 R15:
ffff9501749dc018
FS:
00007f0d6bfd5540(0000) GS:
ffff95017f200000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007fc190161a08 CR3:
0000000232906000 CR4:
00000000001406f0
Call Trace:
ath9k_rng_stop+0x1a/0x20 [ath9k]
ath9k_stop+0x3b/0x1d0 [ath9k]
drv_stop+0x33/0xf0 [mac80211]
ieee80211_stop_device+0x43/0x50 [mac80211]
ieee80211_do_stop+0x4f2/0x810 [mac80211]
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196043
Reported-by: Giulio Genovese <giulio.genovese@gmail.com>
Tested-by: Giulio Genovese <giulio.genovese@gmail.com>
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miaoqing Pan [Tue, 27 Jun 2017 14:31:51 +0000 (17:31 +0300)]
ath9k: fix tx99 bus error
commit
bde717ab473668377fc65872398a102d40cb2d58 upstream.
The hard coded register 0x9864 and 0x9924 are invalid
for ar9300 chips.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miaoqing Pan [Tue, 27 Jun 2017 14:31:49 +0000 (17:31 +0300)]
ath9k: fix tx99 use after free
commit
cf8ce1ea61b75712a154c93e40f2a5af2e4dd997 upstream.
One scenario that could lead to UAF is two threads writing
simultaneously to the "tx99" debug file. One of them would
set the "start" value to true and follow to ath9k_tx99_init().
Inside the function it would set the sc->tx99_state to true
after allocating sc->tx99skb. Then, the other thread would
execute write_file_tx99() and call ath9k_tx99_deinit().
sc->tx99_state would be freed. After that, the first thread
would continue inside ath9k_tx99_init() and call
r = ath9k_tx99_send(sc, sc->tx99_skb, &txctl);
that would make use of the freed sc->tx99_skb memory.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Viresh Kumar [Tue, 25 Apr 2017 10:27:08 +0000 (15:57 +0530)]
thermal: cpu_cooling: Avoid accessing potentially freed structures
commit
289d72afddf83440117c35d864bf0c6309c1d011 upstream.
After the lock is dropped, it is possible that the cpufreq_dev gets
freed before we call get_level() and that can cause kernel to crash.
Drop the lock after we are done using the structure.
Fixes:
02373d7c69b4 ("thermal: cpu_cooling: fix lockdep problems in cpu_cooling")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Tue, 6 Jun 2017 15:59:03 +0000 (17:59 +0200)]
thermal: max77620: fix device-node reference imbalance
commit
c592fafbdbb6b1279b76a54722d1465ca77e5bde upstream.
The thermal child device reuses the parent MFD-device device-tree node
when registering a thermal zone, but did not take a reference to the
node.
This leads to a reference imbalance, and potential use-after-free, when
the node reference is dropped by the platform-bus device destructor
(once for the child and later again for the parent).
Fix this by dropping any reference already held to a device-tree node
and getting a reference to the parent's node which will be balanced on
reprobe or on platform-device release, whichever comes first.
Note that simply clearing the of_node pointer on probe errors and on
driver unbind would not allow the use of device-managed resources as
specifically thermal_zone_of_sensor_unregister() claims that a valid
device-tree node pointer is needed during deregistration (even if it
currently does not seem to use it).
Fixes:
ec4664b3fd6d ("thermal: max77620: Add thermal driver for reporting junction temp")
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mauro Carvalho Chehab [Thu, 18 May 2017 13:40:00 +0000 (10:40 -0300)]
s5p-jpeg: don't return a random width/height
commit
a16e37726c444cbda91e73ed5f742e717bfe866f upstream.
Gcc 7.1 complains about:
drivers/media/platform/s5p-jpeg/jpeg-core.c: In function 's5p_jpeg_parse_hdr.isra.9':
drivers/media/platform/s5p-jpeg/jpeg-core.c:1207:12: warning: 'width' may be used uninitialized in this function [-Wmaybe-uninitialized]
result->w = width;
~~~~~~~~~~^~~~~~~
drivers/media/platform/s5p-jpeg/jpeg-core.c:1208:12: warning: 'height' may be used uninitialized in this function [-Wmaybe-uninitialized]
result->h = height;
~~~~~~~~~~^~~~~~~~
Indeed the code would allow it to return a random value (although
it shouldn't happen, in practice). So, explicitly set both to zero,
just in case.
Acked-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Snitzer [Fri, 6 Jan 2017 20:33:14 +0000 (15:33 -0500)]
dm mpath: cleanup -Wbool-operation warning in choose_pgpath()
commit
d19a55ccad15a486ffe03030570744e5d5bd9f8e upstream.
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Thu, 11 May 2017 11:46:44 +0000 (08:46 -0300)]
ir-core: fix gcc-7 warning on bool arithmetic
commit
bd7e31bbade02bc1e92aa00d5cf2cee2da66838a upstream.
gcc-7 suggests that an expression using a bitwise not and a bitmask
on a 'bool' variable is better written using boolean logic:
drivers/media/rc/imon.c: In function 'imon_incoming_scancode':
drivers/media/rc/imon.c:1725:22: error: '~' on a boolean expression [-Werror=bool-operation]
ictx->pad_mouse = ~(ictx->pad_mouse) & 0x1;
^
drivers/media/rc/imon.c:1725:22: note: did you mean to use logical not?
I agree.
Fixes:
21677cfc562a ("V4L/DVB: ir-core: add imon driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Thu, 13 Jul 2017 02:25:47 +0000 (19:25 -0700)]
disable new gcc-7.1.1 warnings for now
commit
bd664f6b3e376a8ef4990f87d08271cc2d01ba9a upstream.
I made the mistake of upgrading my desktop to the new Fedora 26 that
comes with gcc-7.1.1.
There's nothing wrong per se that I've noticed, but I now have 1500
lines of warnings, mostly from the new format-truncation warning
triggering all over the tree.
We use 'snprintf()' and friends in a lot of places, and often know that
the numbers are fairly small (ie a controller index or similar), but gcc
doesn't know that, and sees an 'int', and thinks that it could be some
huge number. And then complains when our buffers are not able to fit
the name for the ten millionth controller.
These warnings aren't necessarily bad per se, and we probably want to
look through them subsystem by subsystem, but at least during the merge
window they just mean that I can't even see if somebody is introducing
any *real* problems when I pull.
So warnings disabled for now.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 21 Jul 2017 05:42:36 +0000 (07:42 +0200)]
4.9.39
Haozhong Zhang [Tue, 4 Jul 2017 02:27:41 +0000 (10:27 +0800)]
kvm: vmx: allow host to access guest MSR_IA32_BNDCFGS
commit
691bd4340bef49cf7e5855d06cf24444b5bf2d85 upstream.
It's easier for host applications, such as QEMU, if they can always
access guest MSR_IA32_BNDCFGS in VMCS, even though MPX is disabled in
guest cpuid.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jim Mattson [Tue, 23 May 2017 18:52:54 +0000 (11:52 -0700)]
kvm: vmx: Check value written to IA32_BNDCFGS
commit
4531662d1abf6c1f0e5c2b86ddb60e61509786c8 upstream.
Bits 11:2 must be zero and the linear addess in bits 63:12 must be
canonical. Otherwise, WRMSR(BNDCFGS) should raise #GP.
Fixes:
0dd376e709975779 ("KVM: x86: add MSR_IA32_BNDCFGS to msrs_to_save")
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jim Mattson [Wed, 24 May 2017 17:49:25 +0000 (10:49 -0700)]
kvm: x86: Guest BNDCFGS requires guest MPX support
commit
4439af9f911ae0243ffe4e2dfc12bace49605d8b upstream.
The BNDCFGS MSR should only be exposed to the guest if the guest
supports MPX. (cf. the TSC_AUX MSR and RDTSCP.)
Fixes:
0dd376e709975779 ("KVM: x86: add MSR_IA32_BNDCFGS to msrs_to_save")
Change-Id: I3ad7c01bda616715137ceac878f3fa7e66b6b387
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jim Mattson [Tue, 23 May 2017 18:52:52 +0000 (11:52 -0700)]
kvm: vmx: Do not disable intercepts for BNDCFGS
commit
a8b6fda38f80e75afa3b125c9e7f2550b579454b upstream.
The MSR permission bitmaps are shared by all VMs. However, some VMs
may not be configured to support MPX, even when the host does. If the
host supports VMX and the guest does not, we should intercept accesses
to the BNDCFGS MSR, so that we can synthesize a #GP
fault. Furthermore, if the host does not support MPX and the
"ignore_msrs" kvm kernel parameter is set, then we should intercept
accesses to the BNDCFGS MSR, so that we can skip over the rdmsr/wrmsr
without raising a #GP fault.
Fixes:
da8999d31818fdc8 ("KVM: x86: Intel MPX vmx and msr handle")
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavankumar Kondeti [Fri, 9 Dec 2016 16:20:17 +0000 (21:50 +0530)]
tracing: Use SOFTIRQ_OFFSET for softirq dectection for more accurate results
commit
c59f29cb144a6a0dfac16ede9dc8eafc02dc56ca upstream.
The 's' flag is supposed to indicate that a softirq is running. This
can be detected by testing the preempt_count with SOFTIRQ_OFFSET.
The current code tests the preempt_count with SOFTIRQ_MASK, which
would be true even when softirqs are disabled but not serving a
softirq.
Link: http://lkml.kernel.org/r/1481300417-3564-1-git-send-email-pkondeti@codeaurora.org
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Mon, 10 Jul 2017 07:21:40 +0000 (10:21 +0300)]
PM / QoS: return -EINVAL for bogus strings
commit
2ca30331c156ca9e97643ad05dd8930b8fe78b01 upstream.
In the current code, if the user accidentally writes a bogus command to
this sysfs file, then we set the latency tolerance to an uninitialized
variable.
Fixes:
2d984ad132a8 (PM / QoS: Introcuce latency tolerance device PM QoS type)
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Gleixner [Sun, 25 Jun 2017 17:31:13 +0000 (19:31 +0200)]
PM / wakeirq: Convert to SRCU
commit
ea0212f40c6bc0594c8eff79266759e3ecd4bacc upstream.
The wakeirq infrastructure uses RCU to protect the list of wakeirqs. That
breaks the irq bus locking infrastructure, which is allows sleeping
functions to be called so interrupt controllers behind slow busses,
e.g. i2c, can be handled.
The wakeirq functions hold rcu_read_lock and call into irq functions, which
in case of interrupts using the irq bus locking will trigger a
might_sleep() splat.
Convert the wakeirq infrastructure to Sleepable RCU and unbreak it.
Fixes:
4990d4fe327b (PM / Wakeirq: Add automated device wake IRQ handling)
Reported-by: Brian Norris <briannorris@chromium.org>
Suggested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Tue, 25 Apr 2017 12:00:49 +0000 (14:00 +0200)]
sched/topology: Fix overlapping sched_group_mask
commit
73bb059f9b8a00c5e1bf2f7ca83138c05d05e600 upstream.
The point of sched_group_mask is to select those CPUs from
sched_group_cpus that can actually arrive at this balance domain.
The current code gets it wrong, as can be readily demonstrated with a
topology like:
node 0 1 2 3
0: 10 20 30 20
1: 20 10 20 30
2: 30 20 10 20
3: 20 30 20 10
Where (for example) domain 1 on CPU1 ends up with a mask that includes
CPU0:
[] CPU1 attaching sched-domain:
[] domain 0: span 0-2 level NUMA
[] groups: 1 (mask: 1), 2, 0
[] domain 1: span 0-3 level NUMA
[] groups: 0-2 (mask: 0-2) (cpu_capacity: 3072), 0,2-3 (cpu_capacity: 3072)
This causes sched_balance_cpu() to compute the wrong CPU and
consequently should_we_balance() will terminate early resulting in
missed load-balance opportunities.
The fixed topology looks like:
[] CPU1 attaching sched-domain:
[] domain 0: span 0-2 level NUMA
[] groups: 1 (mask: 1), 2, 0
[] domain 1: span 0-3 level NUMA
[] groups: 0-2 (mask: 1) (cpu_capacity: 3072), 0,2-3 (cpu_capacity: 3072)
(note: this relies on OVERLAP domains to always have children, this is
true because the regular topology domains are still here -- this is
before degenerate trimming)
Debugged-by: Lauro Ramos Venancio <lvenanci@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Fixes:
e3589f6c81e4 ("sched: Allow for overlapping sched_domain spans")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lauro Ramos Venancio [Thu, 20 Apr 2017 19:51:40 +0000 (16:51 -0300)]
sched/topology: Optimize build_group_mask()
commit
f32d782e31bf079f600dcec126ed117b0577e85c upstream.
The group mask is always used in intersection with the group CPUs. So,
when building the group mask, we don't have to care about CPUs that are
not part of the group.
Signed-off-by: Lauro Ramos Venancio <lvenanci@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: lwang@redhat.com
Cc: riel@redhat.com
Link: http://lkml.kernel.org/r/1492717903-5195-2-git-send-email-lvenanci@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Fri, 14 Apr 2017 15:24:02 +0000 (17:24 +0200)]
sched/topology: Fix building of overlapping sched-groups
commit
0372dd2736e02672ac6e189c31f7d8c02ad543cd upstream.
When building the overlapping groups, we very obviously should start
with the previous domain of _this_ @cpu, not CPU-0.
This can be readily demonstrated with a topology like:
node 0 1 2 3
0: 10 20 30 20
1: 20 10 20 30
2: 30 20 10 20
3: 20 30 20 10
Where (for example) CPU1 ends up generating the following nonsensical groups:
[] CPU1 attaching sched-domain:
[] domain 0: span 0-2 level NUMA
[] groups: 1 2 0
[] domain 1: span 0-3 level NUMA
[] groups: 1-3 (cpu_capacity = 3072) 0-1,3 (cpu_capacity = 3072)
Where the fact that domain 1 doesn't include a group with span 0-2 is
the obvious fail.
With patch this looks like:
[] CPU1 attaching sched-domain:
[] domain 0: span 0-2 level NUMA
[] groups: 1 0 2
[] domain 1: span 0-3 level NUMA
[] groups: 0-2 (cpu_capacity = 3072) 0,2-3 (cpu_capacity = 3072)
Debugged-by: Lauro Ramos Venancio <lvenanci@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Fixes:
e3589f6c81e4 ("sched: Allow for overlapping sched_domain spans")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Fri, 14 Apr 2017 12:20:05 +0000 (14:20 +0200)]
sched/fair, cpumask: Export for_each_cpu_wrap()
commit
c6508a39640b9a27fc2bc10cb708152672c82045 upstream.
commit
c743f0a5c50f2fcbc628526279cfa24f3dabe182 upstream.
More users for for_each_cpu_wrap() have appeared. Promote the construct
to generic cpumask interface.
The implementation is slightly modified to reduce arguments.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Lauro Ramos Venancio <lvenanci@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: lwang@redhat.com
Link: http://lkml.kernel.org/r/20170414122005.o35me2h5nowqkxbv@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 19 Jul 2017 07:58:49 +0000 (09:58 +0200)]
Revert "sched/core: Optimize SCHED_SMT"
This reverts commit
1b568f0aabf280555125bc7cefc08321ff0ebaba.
For the 4.9 kernel tree, this patch causes scheduler regressions. It is
fixed in newer kernels with a large number of individual patches, the
sum of which is too big for the stable kernel tree.
Ingo recommended just reverting the single patch for this tree, as it's
much simpler.
Reported-by: Ben Guthro <ben@guthro.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Horia Geantă [Fri, 7 Jul 2017 13:57:06 +0000 (16:57 +0300)]
crypto: caam - fix signals handling
commit
7459e1d25ffefa2b1be799477fcc1f6c62f6cec7 upstream.
Driver does not properly handle the case when signals interrupt
wait_for_completion_interruptible():
-it does not check for return value
-completion structure is allocated on stack; in case a signal interrupts
the sleep, it will go out of scope, causing the worker thread
(caam_jr_dequeue) to fail when it accesses it
wait_for_completion_interruptible() is replaced with uninterruptable
wait_for_completion().
We choose to block all signals while waiting for I/O (device executing
the split key generation job descriptor) since the alternative - in
order to have a deterministic device state - would be to flush the job
ring (aborting *all* in-progress jobs).
Fixes:
045e36780f115 ("crypto: caam - ahash hmac support")
Fixes:
4c1ec1f930154 ("crypto: caam - refactor key_gen, sg")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Gstir [Wed, 28 Jun 2017 13:27:10 +0000 (15:27 +0200)]
crypto: caam - properly set IV after {en,de}crypt
commit
854b06f768794cd664886ec3ba3a5b1c58d42167 upstream.
Certain cipher modes like CTS expect the IV (req->info) of
ablkcipher_request (or equivalently req->iv of skcipher_request) to
contain the last ciphertext block when the {en,de}crypt operation is done.
This is currently not the case for the CAAM driver which in turn breaks
e.g. cts(cbc(aes)) when the CAAM driver is enabled.
This patch fixes the CAAM driver to properly set the IV after the
{en,de}crypt operation of ablkcipher finishes.
This issue was revealed by the changes in the SW CTS mode in commit
0605c41cc53ca ("crypto: cts - Convert to skcipher")
Signed-off-by: David Gstir <david@sigma-star.at>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Herbert Xu [Tue, 4 Jul 2017 04:21:12 +0000 (12:21 +0800)]
crypto: sha1-ssse3 - Disable avx2
commit
b82ce24426a4071da9529d726057e4e642948667 upstream.
It has been reported that sha1-avx2 can cause page faults by reading
beyond the end of the input. This patch disables it until it can be
fixed.
Fixes:
7c1da8d0d046 ("crypto: sha - SHA1 transform x86_64 AVX2")
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gilad Ben-Yossef [Wed, 28 Jun 2017 07:22:03 +0000 (10:22 +0300)]
crypto: atmel - only treat EBUSY as transient if backlog
commit
1606043f214f912a52195293614935811a6e3e53 upstream.
The Atmel SHA driver was treating -EBUSY as indication of queueing
to backlog without checking that backlog is enabled for the request.
Fix it by checking request flags.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Hicks [Tue, 2 May 2017 13:38:35 +0000 (09:38 -0400)]
crypto: talitos - Extend max key length for SHA384/512-HMAC and AEAD
commit
03d2c5114c95797c0aa7d9f463348b171a274fd4 upstream.
An updated patch that also handles the additional key length requirements
for the AEAD algorithms.
The max keysize is not 96. For SHA384/512 it's 128, and for the AEAD
algorithms it's longer still. Extend the max keysize for the
AEAD size for AES256 + HMAC(SHA512).
Fixes:
357fb60502ede ("crypto: talitos - add sha224, sha384 and sha512 to existing AEAD algorithms")
Signed-off-by: Martin Hicks <mort@bork.org>
Acked-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helge Deller [Fri, 14 Jul 2017 21:49:38 +0000 (14:49 -0700)]
mm: fix overflow check in expand_upwards()
commit
37511fb5c91db93d8bd6e3f52f86e5a7ff7cfcdf upstream.
Jörn Engel noticed that the expand_upwards() function might not return
-ENOMEM in case the requested address is (unsigned long)-PAGE_SIZE and
if the architecture didn't defined TASK_SIZE as multiple of PAGE_SIZE.
Affected architectures are arm, frv, m68k, blackfin, h8300 and xtensa
which all define TASK_SIZE as 0xffffffff, but since none of those have
an upwards-growing stack we currently have no actual issue.
Nevertheless let's fix this just in case any of the architectures with
an upward-growing stack (currently parisc, metag and partly ia64) define
TASK_SIZE similar.
Link: http://lkml.kernel.org/r/20170702192452.GA11868@p100.box
Fixes:
bd726c90b6b8 ("Allow stack to grow up to address space limit")
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: Jörn Engel <joern@purestorage.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Lutomirski [Thu, 29 Jun 2017 15:46:12 +0000 (08:46 -0700)]
selftests/capabilities: Fix the test_execve test
commit
796a3bae2fba6810427efdb314a1c126c9490fb3 upstream.
test_execve does rather odd mount manipulations to safely create
temporary setuid and setgid executables that aren't visible to the
rest of the system. Those executables end up in the test's cwd, but
that cwd is MNT_DETACHed.
The core namespace code considers MNT_DETACHed trees to belong to no
mount namespace at all and, in general, MNT_DETACHed trees are only
barely function. This interacted with commit
380cf5ba6b0a ("fs:
Treat foreign mounts as nosuid") to cause all MNT_DETACHed trees to
act as though they're nosuid, breaking the test.
Fix it by just not detaching the tree. It's still in a private
mount namespace and is therefore still invisible to the rest of the
system (except via /proc, and the same nosuid logic will protect all
other programs on the system from believing in test_execve's setuid
bits).
While we're at it, fix some blatant whitespace problems.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes:
380cf5ba6b0a ("fs: Treat foreign mounts as nosuid")
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Greg KH <greg@kroah.com>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric W. Biederman [Mon, 24 Oct 2016 22:25:19 +0000 (17:25 -0500)]
mnt: Make propagate_umount less slow for overlapping mount propagation trees
commit
296990deb389c7da21c78030376ba244dc1badf5 upstream.
Andrei Vagin pointed out that time to executue propagate_umount can go
non-linear (and take a ludicrious amount of time) when the mount
propogation trees of the mounts to be unmunted by a lazy unmount
overlap.
Make the walk of the mount propagation trees nearly linear by
remembering which mounts have already been visited, allowing
subsequent walks to detect when walking a mount propgation tree or a
subtree of a mount propgation tree would be duplicate work and to skip
them entirely.
Walk the list of mounts whose propgatation trees need to be traversed
from the mount highest in the mount tree to mounts lower in the mount
tree so that odds are higher that the code will walk the largest trees
first, allowing later tree walks to be skipped entirely.
Add cleanup_umount_visitation to remover the code's memory of which
mounts have been visited.
Add the functions last_slave and skip_propagation_subtree to allow
skipping appropriate parts of the mount propagation tree without
needing to change the logic of the rest of the code.
A script to generate overlapping mount propagation trees:
$ cat runs.h
set -e
mount -t tmpfs zdtm /mnt
mkdir -p /mnt/1 /mnt/2
mount -t tmpfs zdtm /mnt/1
mount --make-shared /mnt/1
mkdir /mnt/1/1
iteration=10
if [ -n "$1" ] ; then
iteration=$1
fi
for i in $(seq $iteration); do
mount --bind /mnt/1/1 /mnt/1/1
done
mount --rbind /mnt/1 /mnt/2
TIMEFORMAT='%Rs'
nr=$(( ( 2 ** ( $iteration + 1 ) ) + 1 ))
echo -n "umount -l /mnt/1 -> $nr "
time umount -l /mnt/1
nr=$(cat /proc/self/mountinfo | grep zdtm | wc -l )
time umount -l /mnt/2
$ for i in $(seq 9 19); do echo $i; unshare -Urm bash ./run.sh $i; done
Here are the performance numbers with and without the patch:
mhash | 8192 | 8192 | 1048576 | 1048576
mounts | before | after | before | after
------------------------------------------------
1025 | 0.040s | 0.016s | 0.038s | 0.019s
2049 | 0.094s | 0.017s | 0.080s | 0.018s
4097 | 0.243s | 0.019s | 0.206s | 0.023s
8193 | 1.202s | 0.028s | 1.562s | 0.032s
16385 | 9.635s | 0.036s | 9.952s | 0.041s
32769 | 60.928s | 0.063s | 44.321s | 0.064s
65537 | | 0.097s | | 0.097s
131073 | | 0.233s | | 0.176s
262145 | | 0.653s | | 0.344s
524289 | | 2.305s | | 0.735s
1048577 | | 7.107s | | 2.603s
Andrei Vagin reports fixing the performance problem is part of the
work to fix CVE-2016-6213.
Fixes:
a05964f3917c ("[PATCH] shared mounts handling: umount")
Reported-by: Andrei Vagin <avagin@openvz.org>
Reviewed-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric W. Biederman [Mon, 24 Oct 2016 21:16:13 +0000 (16:16 -0500)]
mnt: In propgate_umount handle visiting mounts in any order
commit
99b19d16471e9c3faa85cad38abc9cbbe04c6d55 upstream.
While investigating some poor umount performance I realized that in
the case of overlapping mount trees where some of the mounts are locked
the code has been failing to unmount all of the mounts it should
have been unmounting.
This failure to unmount all of the necessary
mounts can be reproduced with:
$ cat locked_mounts_test.sh
mount -t tmpfs test-base /mnt
mount --make-shared /mnt
mkdir -p /mnt/b
mount -t tmpfs test1 /mnt/b
mount --make-shared /mnt/b
mkdir -p /mnt/b/10
mount -t tmpfs test2 /mnt/b/10
mount --make-shared /mnt/b/10
mkdir -p /mnt/b/10/20
mount --rbind /mnt/b /mnt/b/10/20
unshare -Urm --propagation unchaged /bin/sh -c 'sleep 5; if [ $(grep test /proc/self/mountinfo | wc -l) -eq 1 ] ; then echo SUCCESS ; else echo FAILURE ; fi'
sleep 1
umount -l /mnt/b
wait %%
$ unshare -Urm ./locked_mounts_test.sh
This failure is corrected by removing the prepass that marks mounts
that may be umounted.
A first pass is added that umounts mounts if possible and if not sets
mount mark if they could be unmounted if they weren't locked and adds
them to a list to umount possibilities. This first pass reconsiders
the mounts parent if it is on the list of umount possibilities, ensuring
that information of umoutability will pass from child to mount parent.
A second pass then walks through all mounts that are umounted and processes
their children unmounting them or marking them for reparenting.
A last pass cleans up the state on the mounts that could not be umounted
and if applicable reparents them to their first parent that remained
mounted.
While a bit longer than the old code this code is much more robust
as it allows information to flow up from the leaves and down
from the trunk making the order in which mounts are encountered
in the umount propgation tree irrelevant.
Fixes:
0c56fe31420c ("mnt: Don't propagate unmounts to locked mounts")
Reviewed-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric W. Biederman [Mon, 15 May 2017 19:42:07 +0000 (14:42 -0500)]
mnt: In umount propagation reparent in a separate pass
commit
570487d3faf2a1d8a220e6ee10f472163123d7da upstream.
It was observed that in some pathlogical cases that the current code
does not unmount everything it should. After investigation it
was determined that the issue is that mnt_change_mntpoint can
can change which mounts are available to be unmounted during mount
propagation which is wrong.
The trivial reproducer is:
$ cat ./pathological.sh
mount -t tmpfs test-base /mnt
cd /mnt
mkdir 1 2 1/1
mount --bind 1 1
mount --make-shared 1
mount --bind 1 2
mount --bind 1/1 1/1
mount --bind 1/1 1/1
echo
grep test-base /proc/self/mountinfo
umount 1/1
echo
grep test-base /proc/self/mountinfo
$ unshare -Urm ./pathological.sh
The expected output looks like:
46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000
47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
49 54 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
50 53 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
51 49 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
54 47 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
53 48 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
52 50 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000
47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
The output without the fix looks like:
46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000
47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
49 54 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
50 53 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
51 49 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
54 47 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
53 48 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
52 50 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000
47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
52 48 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
That last mount in the output was in the propgation tree to be unmounted but
was missed because the mnt_change_mountpoint changed it's parent before the walk
through the mount propagation tree observed it.
Fixes:
1064f874abc0 ("mnt: Tuck mounts under others instead of creating shadow/side mounts.")
Acked-by: Andrei Vagin <avagin@virtuozzo.com>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Fri, 9 Jun 2017 09:59:07 +0000 (10:59 +0100)]
nvmem: core: fix leaks on registration errors
commit
3360acdf839170b612f5b212539694c20e3f16d0 upstream.
Make sure to deregister and release the nvmem device and underlying
memory on registration errors.
Note that the private data must be freed using put_device() once the
struct device has been initialised.
Also note that there's a related reference leak in the deregistration
function as reported by Mika Westerberg which is being fixed separately.
Fixes:
b6c217ab9be6 ("nvmem: Add backwards compatibility support for older EEPROM drivers.")
Fixes:
eace75cfdcf7 ("nvmem: Add a simple NVMEM framework for nvmem providers")
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul E. McKenney [Sat, 29 Apr 2017 03:11:09 +0000 (20:11 -0700)]
rcu: Add memory barriers for NOCB leader wakeup
commit
6b5fc3a1331810db407c9e0e673dc1837afdc9d0 upstream.
Wait/wakeup operations do not guarantee ordering on their own. Instead,
either locking or memory barriers are required. This commit therefore
adds memory barriers to wake_nocb_leader() and nocb_leader_wait().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Krister Johansen <kjlx@templeofstupid.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adam Borowski [Sat, 3 Jun 2017 07:35:06 +0000 (09:35 +0200)]
vt: fix unchecked __put_user() in tioclinux ioctls
commit
6987dc8a70976561d22450b5858fc9767788cc1c upstream.
Only read access is checked before this call.
Actually, at the moment this is not an issue, as every in-tree arch does
the same manual checks for VERIFY_READ vs VERIFY_WRITE, relying on the MMU
to tell them apart, but this wasn't the case in the past and may happen
again on some odd arch in the future.
If anyone cares about 3.7 and earlier, this is a security hole (untested)
on real 80386 CPUs.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Zyngier [Wed, 21 Jun 2017 21:45:08 +0000 (22:45 +0100)]
ARM64: dts: marvell: armada37xx: Fix timer interrupt specifiers
commit
88cda00733f0731711c76e535d4972c296ac512e upstream.
Contrary to popular belief, PPIs connected to a GICv3 to not have
an affinity field similar to that of GICv2. That is consistent
with the fact that GICv3 is designed to accomodate thousands of
CPUs, and fitting them as a bitmap in a byte is... difficult.
Fixes:
adbc3695d9e4 ("arm64: dts: add the Marvell Armada 3700 family and a development board")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Fri, 7 Jul 2017 18:57:29 +0000 (11:57 -0700)]
exec: Limit arg stack to at most 75% of _STK_LIM
commit
da029c11e6b12f321f36dac8771e833b65cec962 upstream.
To avoid pathological stack usage or the need to special-case setuid
execs, just limit all arg stack usage to at most 75% of _STK_LIM (6MB).
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Mon, 10 Jul 2017 22:52:51 +0000 (15:52 -0700)]
s390: reduce ELF_ET_DYN_BASE
commit
a73dc5370e153ac63718d850bddf0c9aa9d871e6 upstream.
Now that explicitly executed loaders are loaded in the mmap region, we
have more freedom to decide where we position PIE binaries in the
address space to avoid possible collisions with mmap or stack regions.
For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit
address space for 32-bit pointers. On 32-bit use 4MB, which is the
traditional x86 minimum load location, likely to avoid historically
requiring a 4MB page table entry when only a portion of the first 4MB
would be used (since the NULL address is avoided). For s390 the
position could be 0x10000, but that is needlessly close to the NULL
address.
Link: http://lkml.kernel.org/r/1498154792-49952-5-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Pratyush Anand <panand@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Mon, 10 Jul 2017 22:52:47 +0000 (15:52 -0700)]
powerpc: move ELF_ET_DYN_BASE to 4GB / 4MB
commit
47ebb09d54856500c5a5e14824781902b3bb738e upstream.
Now that explicitly executed loaders are loaded in the mmap region, we
have more freedom to decide where we position PIE binaries in the
address space to avoid possible collisions with mmap or stack regions.
For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit
address space for 32-bit pointers. On 32-bit use 4MB, which is the
traditional x86 minimum load location, likely to avoid historically
requiring a 4MB page table entry when only a portion of the first 4MB
would be used (since the NULL address is avoided).
Link: http://lkml.kernel.org/r/1498154792-49952-4-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Pratyush Anand <panand@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Mon, 10 Jul 2017 22:52:44 +0000 (15:52 -0700)]
arm64: move ELF_ET_DYN_BASE to 4GB / 4MB
commit
02445990a96e60a67526510d8b00f7e3d14101c3 upstream.
Now that explicitly executed loaders are loaded in the mmap region, we
have more freedom to decide where we position PIE binaries in the
address space to avoid possible collisions with mmap or stack regions.
For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit
address space for 32-bit pointers. On 32-bit use 4MB, to match ARM.
This could be 0x8000, the standard ET_EXEC load address, but that is
needlessly close to the NULL address, and anyone running arm compat PIE
will have an MMU, so the tight mapping is not needed.
Link: http://lkml.kernel.org/r/1498251600-132458-4-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Mon, 10 Jul 2017 22:52:40 +0000 (15:52 -0700)]
arm: move ELF_ET_DYN_BASE to 4MB
commit
6a9af90a3bcde217a1c053e135f5f43e5d5fafbd upstream.
Now that explicitly executed loaders are loaded in the mmap region, we
have more freedom to decide where we position PIE binaries in the
address space to avoid possible collisions with mmap or stack regions.
4MB is chosen here mainly to have parity with x86, where this is the
traditional minimum load location, likely to avoid historically
requiring a 4MB page table entry when only a portion of the first 4MB
would be used (since the NULL address is avoided).
For ARM the position could be 0x8000, the standard ET_EXEC load address,
but that is needlessly close to the NULL address, and anyone running PIE
on 32-bit ARM will have an MMU, so the tight mapping is not needed.
Link: http://lkml.kernel.org/r/1498154792-49952-2-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Pratyush Anand <panand@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Qualys Security Advisory <qsa@qualys.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Mon, 10 Jul 2017 22:52:37 +0000 (15:52 -0700)]
binfmt_elf: use ELF_ET_DYN_BASE only for PIE
commit
eab09532d40090698b05a07c1c87f39fdbc5fab5 upstream.
The ELF_ET_DYN_BASE position was originally intended to keep loaders
away from ET_EXEC binaries. (For example, running "/lib/ld-linux.so.2
/bin/cat" might cause the subsequent load of /bin/cat into where the
loader had been loaded.)
With the advent of PIE (ET_DYN binaries with an INTERP Program Header),
ELF_ET_DYN_BASE continued to be used since the kernel was only looking
at ET_DYN. However, since ELF_ET_DYN_BASE is traditionally set at the
top 1/3rd of the TASK_SIZE, a substantial portion of the address space
is unused.
For 32-bit tasks when RLIMIT_STACK is set to RLIM_INFINITY, programs are
loaded above the mmap region. This means they can be made to collide
(CVE-2017-1000370) or nearly collide (CVE-2017-1000371) with
pathological stack regions.
Lowering ELF_ET_DYN_BASE solves both by moving programs below the mmap
region in all cases, and will now additionally avoid programs falling
back to the mmap region by enforcing MAP_FIXED for program loads (i.e.
if it would have collided with the stack, now it will fail to load
instead of falling back to the mmap region).
To allow for a lower ELF_ET_DYN_BASE, loaders (ET_DYN without INTERP)
are loaded into the mmap region, leaving space available for either an
ET_EXEC binary with a fixed location or PIE being loaded into mmap by
the loader. Only PIE programs are loaded offset from ELF_ET_DYN_BASE,
which means architectures can now safely lower their values without risk
of loaders colliding with their subsequently loaded programs.
For 64-bit, ELF_ET_DYN_BASE is best set to 4GB to allow runtimes to use
the entire 32-bit address space for 32-bit pointers.
Thanks to PaX Team, Daniel Micay, and Rik van Riel for inspiration and
suggestions on how to implement this solution.
Fixes:
d1fd836dcf00 ("mm: split ET_DYN ASLR from mmap ASLR")
Link: http://lkml.kernel.org/r/20170621173201.GA114489@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Qualys Security Advisory <qsa@qualys.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pratyush Anand <panand@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cyril Bur [Mon, 10 Jul 2017 22:52:21 +0000 (15:52 -0700)]
checkpatch: silence perl 5.26.0 unescaped left brace warnings
commit
8d81ae05d0176da1c54aeaed697fa34be5c5575e upstream.
As of perl 5, version 26, subversion 0 (v5.26.0) some new warnings have
occurred when running checkpatch.
Unescaped left brace in regex is deprecated here (and will be fatal in
Perl 5.30), passed through in regex; marked by <-- HERE in m/^(.\s*){
<-- HERE \s*/ at scripts/checkpatch.pl line 3544.
Unescaped left brace in regex is deprecated here (and will be fatal in
Perl 5.30), passed through in regex; marked by <-- HERE in m/^(.\s*){
<-- HERE \s*/ at scripts/checkpatch.pl line 3885.
Unescaped left brace in regex is deprecated here (and will be fatal in
Perl 5.30), passed through in regex; marked by <-- HERE in
m/^(\+.*(?:do|\))){ <-- HERE / at scripts/checkpatch.pl line 4374.
It seems perfectly reasonable to do as the warning suggests and simply
escape the left brace in these three locations.
Link: http://lkml.kernel.org/r/20170607060135.17384-1-cyrilbur@gmail.com
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sahitya Tummala [Mon, 10 Jul 2017 22:50:00 +0000 (15:50 -0700)]
fs/dcache.c: fix spin lockup issue on nlru->lock
commit
b17c070fb624cf10162cf92ea5e1ec25cd8ac176 upstream.
__list_lru_walk_one() acquires nlru spin lock (nlru->lock) for longer
duration if there are more number of items in the lru list. As per the
current code, it can hold the spin lock for upto maximum UINT_MAX
entries at a time. So if there are more number of items in the lru
list, then "BUG: spinlock lockup suspected" is observed in the below
path:
spin_bug+0x90
do_raw_spin_lock+0xfc
_raw_spin_lock+0x28
list_lru_add+0x28
dput+0x1c8
path_put+0x20
terminate_walk+0x3c
path_lookupat+0x100
filename_lookup+0x6c
user_path_at_empty+0x54
SyS_faccessat+0xd0
el0_svc_naked+0x24
This nlru->lock is acquired by another CPU in this path -
d_lru_shrink_move+0x34
dentry_lru_isolate_shrink+0x48
__list_lru_walk_one.isra.10+0x94
list_lru_walk_node+0x40
shrink_dcache_sb+0x60
do_remount_sb+0xbc
do_emergency_remount+0xb0
process_one_work+0x228
worker_thread+0x2e0
kthread+0xf4
ret_from_fork+0x10
Fix this lockup by reducing the number of entries to be shrinked from
the lru list to 1024 at once. Also, add cond_resched() before
processing the lru list again.
Link: http://marc.info/?t=149722864900001&r=1&w=2
Link: http://lkml.kernel.org/r/1498707575-2472-1-git-send-email-stummala@codeaurora.org
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Suggested-by: Jan Kara <jack@suse.cz>
Suggested-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Alexander Polakov <apolyakov@beget.ru>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sahitya Tummala [Mon, 10 Jul 2017 22:49:57 +0000 (15:49 -0700)]
mm/list_lru.c: fix list_lru_count_node() to be race free
commit
2c80cd57c74339889a8752b20862a16c28929c3a upstream.
list_lru_count_node() iterates over all memcgs to get the total number of
entries on the node but it can race with memcg_drain_all_list_lrus(),
which migrates the entries from a dead cgroup to another. This can return
incorrect number of entries from list_lru_count_node().
Fix this by keeping track of entries per node and simply return it in
list_lru_count_node().
Link: http://lkml.kernel.org/r/1498707555-30525-1-git-send-email-stummala@codeaurora.org
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Alexander Polakov <apolyakov@beget.ru>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marcin Nowakowski [Thu, 6 Jul 2017 22:35:31 +0000 (15:35 -0700)]
kernel/extable.c: mark core_kernel_text notrace
commit
c0d80ddab89916273cb97114889d3f337bc370ae upstream.
core_kernel_text is used by MIPS in its function graph trace processing,
so having this method traced leads to an infinite set of recursive calls
such as:
Call Trace:
ftrace_return_to_handler+0x50/0x128
core_kernel_text+0x10/0x1b8
prepare_ftrace_return+0x6c/0x114
ftrace_graph_caller+0x20/0x44
return_to_handler+0x10/0x30
return_to_handler+0x0/0x30
return_to_handler+0x0/0x30
ftrace_ops_no_ops+0x114/0x1bc
core_kernel_text+0x10/0x1b8
core_kernel_text+0x10/0x1b8
core_kernel_text+0x10/0x1b8
ftrace_ops_no_ops+0x114/0x1bc
core_kernel_text+0x10/0x1b8
prepare_ftrace_return+0x6c/0x114
ftrace_graph_caller+0x20/0x44
(...)
Mark the function notrace to avoid it being traced.
Link: http://lkml.kernel.org/r/1498028607-6765-1-git-send-email-marcin.nowakowski@imgtec.com
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Meyer <thomas@m3y3r.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kirill A. Shutemov [Thu, 6 Jul 2017 22:35:28 +0000 (15:35 -0700)]
thp, mm: fix crash due race in MADV_FREE handling
commit
bbf29ffc7f963bb894f84f0580c70cfea01c3892 upstream.
Reinette reported the following crash:
BUG: Bad page state in process log2exe pfn:57600
page:
ffffea00015d8000 count:0 mapcount:0 mapping: (null) index:0x20200
flags: 0x4000000000040019(locked|uptodate|dirty|swapbacked)
raw:
4000000000040019 0000000000000000 0000000000020200 00000000ffffffff
raw:
ffffea00015d8020 ffffea00015d8020 0000000000000000 0000000000000000
page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
bad because of flags: 0x1(locked)
Modules linked in: rfcomm 8021q bnep intel_rapl x86_pkg_temp_thermal coretemp efivars btusb btrtl btbcm pwm_lpss_pci snd_hda_codec_hdmi btintel pwm_lpss snd_hda_codec_realtek snd_soc_skl snd_hda_codec_generic snd_soc_skl_ipc spi_pxa2xx_platform snd_soc_sst_ipc snd_soc_sst_dsp i2c_designware_platform i2c_designware_core snd_hda_ext_core snd_soc_sst_match snd_hda_intel snd_hda_codec mei_me snd_hda_core mei snd_soc_rt286 snd_soc_rl6347a snd_soc_core efivarfs
CPU: 1 PID: 354 Comm: log2exe Not tainted 4.12.0-rc7-test-test #19
Hardware name: Intel corporation NUC6CAYS/NUC6CAYB, BIOS AYAPLCEL.86A.0027.2016.1108.1529 11/08/2016
Call Trace:
bad_page+0x16a/0x1f0
free_pages_check_bad+0x117/0x190
free_hot_cold_page+0x7b1/0xad0
__put_page+0x70/0xa0
madvise_free_huge_pmd+0x627/0x7b0
madvise_free_pte_range+0x6f8/0x1150
__walk_page_range+0x6b5/0xe30
walk_page_range+0x13b/0x310
madvise_free_page_range.isra.16+0xad/0xd0
madvise_free_single_vma+0x2e4/0x470
SyS_madvise+0x8ce/0x1450
If somebody frees the page under us and we hold the last reference to
it, put_page() would attempt to free the page before unlocking it.
The fix is trivial reorder of operations.
Dave said:
"I came up with the exact same patch. For posterity, here's the test
case, generated by syzkaller and trimmed down by Reinette:
https://www.sr71.net/~dave/intel/log2.c
And the config that helps detect this:
https://www.sr71.net/~dave/intel/config-log2"
Fixes:
b8d3c4c3009d ("mm/huge_memory.c: don't split THP page when MADV_FREE syscall is called")
Link: http://lkml.kernel.org/r/20170628101249.17879-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Hutchings [Thu, 25 May 2017 12:58:33 +0000 (12:58 +0000)]
tools/lib/lockdep: Reduce MAX_LOCK_DEPTH to avoid overflowing lock_chain/: Depth
commit
98dcea0cfd04e083ac74137ceb9a632604740e2d upstream.
liblockdep has been broken since commit
75dd602a5198 ("lockdep: Fix
lock_chain::base size"), as that adds a check that MAX_LOCK_DEPTH is
within the range of lock_chain::depth and in liblockdep it is much
too large.
That should have resulted in a compiler error, but didn't because:
- the check uses ARRAY_SIZE(), which isn't yet defined in liblockdep
so is assumed to be an (undeclared) function
- putting a function call inside a BUILD_BUG_ON() expression quietly
turns it into some nonsense involving a variable-length array
It did produce a compiler warning, but I didn't notice because
liblockdep already produces too many warnings if -Wall is enabled
(which I'll fix shortly).
Even before that commit, which reduced lock_chain::depth from 8 bits
to 6, MAX_LOCK_DEPTH was too large.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: a.p.zijlstra@chello.nl
Link: http://lkml.kernel.org/r/20170525130005.5947-3-alexander.levin@verizon.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helge Deller [Mon, 29 May 2017 15:14:16 +0000 (17:14 +0200)]
parisc/mm: Ensure IRQs are off in switch_mm()
commit
649aa24254e85bf6bd7807dd372d083707852b1f upstream.
This is because of commit
f98db6013c55 ("sched/core: Add switch_mm_irqs_off()
and use it in the scheduler") in which switch_mm_irqs_off() is called by the
scheduler, vs switch_mm() which is used by use_mm().
This patch lets the parisc code mirror the x86 and powerpc code, ie. it
disables interrupts in switch_mm(), and optimises the scheduler case by
defining switch_mm_irqs_off().
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Bogendoerfer [Mon, 3 Jul 2017 08:38:05 +0000 (10:38 +0200)]
parisc: DMA API: return error instead of BUG_ON for dma ops on non dma devs
commit
33f9e02495d15a061f0c94ef46f5103a2d0c20f3 upstream.
Enabling parport pc driver on a B2600 (and probably other 64bit PARISC
systems) produced following BUG:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.12.0-rc5-30198-g1132d5e #156
task:
000000009e050000 task.stack:
000000009e04c000
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW:
00001000000001101111111100001111 Not tainted
r00-03
000000ff0806ff0f 000000009e04c990 0000000040871b78 000000009e04cac0
r04-07
0000000040c14de0 ffffffffffffffff 000000009e07f098 000000009d82d200
r08-11
000000009d82d210 0000000000000378 0000000000000000 0000000040c345e0
r12-15
0000000000000005 0000000040c345e0 0000000000000000 0000000040c9d5e0
r16-19
0000000040c345e0 00000000f00001c4 00000000f00001bc 0000000000000061
r20-23
000000009e04ce28 0000000000000010 0000000000000010 0000000040b89e40
r24-27
0000000000000003 0000000000ffffff 000000009d82d210 0000000040c14de0
r28-31
0000000000000000 000000009e04ca90 000000009e04cb40 0000000000000000
sr00-03
0000000000000000 0000000000000000 0000000000000000 0000000000000000
sr04-07
0000000000000000 0000000000000000 0000000000000000 0000000000000000
IASQ:
0000000000000000 0000000000000000 IAOQ:
00000000404aece0 00000000404aece4
IIR:
03ffe01f ISR:
0000000010340000 IOR:
000001781304cac8
CPU: 0 CR30:
000000009e04c000 CR31:
00000000e2976de2
ORIG_R28:
0000000000000200
IAOQ[0]: sba_dma_supported+0x80/0xd0
IAOQ[1]: sba_dma_supported+0x84/0xd0
RP(r2): parport_pc_probe_port+0x178/0x1200
Cause is a call to dma_coerce_mask_and_coherenet in parport_pc_probe_port,
which PARISC DMA API doesn't handle very nicely. This commit gives back
DMA_ERROR_CODE for DMA API calls, if device isn't capable of DMA
transaction.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Tue, 13 Jun 2017 06:18:30 +0000 (23:18 -0700)]
parisc: use compat_sys_keyctl()
commit
b0f94efd5aa8daa8a07d7601714c2573266cd4c9 upstream.
Architectures with a compat syscall table must put compat_sys_keyctl()
in it, not sys_keyctl(). The parisc architecture was not doing this;
fix it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helge Deller [Sun, 2 Jul 2017 20:00:41 +0000 (22:00 +0200)]
parisc: Report SIGSEGV instead of SIGBUS when running out of stack
commit
247462316f85a9e0479445c1a4223950b68ffac1 upstream.
When a process runs out of stack the parisc kernel wrongly faults with SIGBUS
instead of the expected SIGSEGV signal.
This example shows how the kernel faults:
do_page_fault() command='a.out' type=15 address=0xfaac2000 in libc-2.24.so[
f8308000+16c000]
trap #15: Data TLB miss fault, vm_start = 0xfa2c2000, vm_end = 0xfaac2000
The vma->vm_end value is the first address which does not belong to the vma, so
adjust the check to include vma->vm_end to the range for which to send the
SIGSEGV signal.
This patch unbreaks building the debian libsigsegv package.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suzuki K Poulose [Fri, 30 Jun 2017 09:58:28 +0000 (10:58 +0100)]
irqchip/gic-v3: Fix out-of-bound access in gic_set_affinity
commit
866d7c1b0a3c70387646c4e455e727a58c5d465a upstream.
The GICv3 driver doesn't check if the target CPU for gic_set_affinity
is valid before going ahead and making the changes. This triggers the
following splat with KASAN:
[ 141.189434] BUG: KASAN: global-out-of-bounds in gic_set_affinity+0x8c/0x140
[ 141.189704] Read of size 8 at addr
ffff200009741d20 by task swapper/1/0
[ 141.189958]
[ 141.190158] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.12.0-rc7
[ 141.190458] Hardware name: Foundation-v8A (DT)
[ 141.190658] Call trace:
[ 141.190908] [<
ffff200008089d70>] dump_backtrace+0x0/0x328
[ 141.191224] [<
ffff20000808a1b4>] show_stack+0x14/0x20
[ 141.191507] [<
ffff200008504c3c>] dump_stack+0xa4/0xc8
[ 141.191858] [<
ffff20000826c19c>] print_address_description+0x13c/0x250
[ 141.192219] [<
ffff20000826c5c8>] kasan_report+0x210/0x300
[ 141.192547] [<
ffff20000826ad54>] __asan_load8+0x84/0x98
[ 141.192874] [<
ffff20000854eeec>] gic_set_affinity+0x8c/0x140
[ 141.193158] [<
ffff200008148b14>] irq_do_set_affinity+0x54/0xb8
[ 141.193473] [<
ffff200008148d2c>] irq_set_affinity_locked+0x64/0xf0
[ 141.193828] [<
ffff200008148e00>] __irq_set_affinity+0x48/0x78
[ 141.194158] [<
ffff200008bc48a4>] arm_perf_starting_cpu+0x104/0x150
[ 141.194513] [<
ffff2000080d73bc>] cpuhp_invoke_callback+0x17c/0x1f8
[ 141.194783] [<
ffff2000080d94ec>] notify_cpu_starting+0x8c/0xb8
[ 141.195130] [<
ffff2000080911ec>] secondary_start_kernel+0x15c/0x200
[ 141.195390] [<
0000000080db81b4>] 0x80db81b4
[ 141.195603]
[ 141.195685] The buggy address belongs to the variable:
[ 141.196012] __cpu_logical_map+0x200/0x220
[ 141.196176]
[ 141.196315] Memory state around the buggy address:
[ 141.196586]
ffff200009741c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 141.196913]
ffff200009741c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 141.197158] >
ffff200009741d00: 00 00 00 00 fa fa fa fa 00 00 00 00 00 00 00 00
[ 141.197487] ^
[ 141.197758]
ffff200009741d80: 00 00 00 00 00 00 00 00 fa fa fa fa 00 00 00 00
[ 141.198060]
ffff200009741e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 141.198358] ==================================================================
[ 141.198609] Disabling lock debugging due to kernel taint
[ 141.198961] CPU1: Booted secondary processor [
410fd051]
This patch adds the check to make sure the cpu is valid.
Fixes: commit
021f653791ad17e03f98 ("irqchip: gic-v3: Initial support for GICv3")
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Srinivas Dasari [Thu, 6 Jul 2017 22:43:40 +0000 (01:43 +0300)]
cfg80211: Check if NAN service ID is of expected size
commit
0a27844ce86d039d74221dd56cd8c0349b146b63 upstream.
nla policy checks for only maximum length of the attribute data when the
attribute type is NLA_BINARY. If userspace sends less data than
specified, cfg80211 may access illegal memory. When type is NLA_UNSPEC,
nla policy check ensures that userspace sends minimum specified length
number of bytes.
Remove type assignment to NLA_BINARY from nla_policy of
NL80211_NAN_FUNC_SERVICE_ID to make these NLA_UNSPEC and to make sure
minimum NL80211_NAN_FUNC_SERVICE_ID_LEN bytes are received from
userspace with NL80211_NAN_FUNC_SERVICE_ID.
Fixes:
a442b761b24 ("cfg80211: add add_nan_func / del_nan_func")
Signed-off-by: Srinivas Dasari <dasaris@qti.qualcomm.com>
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Srinivas Dasari [Thu, 6 Jul 2017 22:43:39 +0000 (01:43 +0300)]
cfg80211: Check if PMKID attribute is of expected size
commit
9361df14d1cbf966409d5d6f48bb334384fbe138 upstream.
nla policy checks for only maximum length of the attribute data
when the attribute type is NLA_BINARY. If userspace sends less
data than specified, the wireless drivers may access illegal
memory. When type is NLA_UNSPEC, nla policy check ensures that
userspace sends minimum specified length number of bytes.
Remove type assignment to NLA_BINARY from nla_policy of
NL80211_ATTR_PMKID to make this NLA_UNSPEC and to make sure minimum
WLAN_PMKID_LEN bytes are received from userspace with
NL80211_ATTR_PMKID.
Fixes:
67fbb16be69d ("nl80211: PMKSA caching support")
Signed-off-by: Srinivas Dasari <dasaris@qti.qualcomm.com>
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Srinivas Dasari [Thu, 6 Jul 2017 22:43:42 +0000 (01:43 +0300)]
cfg80211: Validate frequencies nested in NL80211_ATTR_SCAN_FREQUENCIES
commit
d7f13f7450369281a5d0ea463cc69890a15923ae upstream.
validate_scan_freqs() retrieves frequencies from attributes
nested in the attribute NL80211_ATTR_SCAN_FREQUENCIES with
nla_get_u32(), which reads 4 bytes from each attribute
without validating the size of data received. Attributes
nested in NL80211_ATTR_SCAN_FREQUENCIES don't have an nla policy.
Validate size of each attribute before parsing to avoid potential buffer
overread.
Fixes:
2a519311926 ("cfg80211/nl80211: scanning (and mac80211 update to use it)")
Signed-off-by: Srinivas Dasari <dasaris@qti.qualcomm.com>
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Srinivas Dasari [Thu, 6 Jul 2017 22:43:41 +0000 (01:43 +0300)]
cfg80211: Define nla_policy for NL80211_ATTR_LOCAL_MESH_POWER_MODE
commit
8feb69c7bd89513be80eb19198d48f154b254021 upstream.
Buffer overread may happen as nl80211_set_station() reads 4 bytes
from the attribute NL80211_ATTR_LOCAL_MESH_POWER_MODE without
validating the size of data received when userspace sends less
than 4 bytes of data with NL80211_ATTR_LOCAL_MESH_POWER_MODE.
Define nla_policy for NL80211_ATTR_LOCAL_MESH_POWER_MODE to avoid
the buffer overread.
Fixes:
3b1c5a5307f ("{cfg,nl}80211: mesh power mode primitives and userspace access")
Signed-off-by: Srinivas Dasari <dasaris@qti.qualcomm.com>
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bert Kenward [Wed, 12 Jul 2017 16:19:41 +0000 (17:19 +0100)]
sfc: don't read beyond unicast address list
[ Upstream commit
c70d68150f71b84cea6997a53493e17bf18a54db ]
If we have more than 32 unicast MAC addresses assigned to an interface
we will read beyond the end of the address table in the driver when
adding filters. The next 256 entries store multicast addresses, so we
will end up attempting to insert duplicate filters, which is mostly
harmless. If we add more than 288 unicast addresses we will then read
past the multicast address table, which is likely to be more exciting.
Fixes:
12fb0da45c9a ("sfc: clean fallbacks between promisc/normal in efx_ef10_filter_sync_rx_mode")
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter S. Housel [Mon, 12 Jun 2017 10:46:22 +0000 (11:46 +0100)]
brcmfmac: Fix glom_skb leak in brcmf_sdiod_recv_chain
commit
5ea59db8a375216e6c915c5586f556766673b5a7 upstream.
An earlier change to this function (
3bdae810721b) fixed a leak in the
case of an unsuccessful call to brcmf_sdiod_buffrw(). However, the
glom_skb buffer, used for emulating a scattering read, is never used
or referenced after its contents are copied into the destination
buffers, and therefore always needs to be freed by the end of the
function.
Fixes:
3bdae810721b ("brcmfmac: Fix glob_skb leak in brcmf_sdiod_recv_chain")
Fixes:
a413e39a38573 ("brcmfmac: fix brcmf_sdcard_recv_chain() for host without sg support")
Signed-off-by: Peter S. Housel <housel@acm.org>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe Jaillet [Wed, 21 Jun 2017 05:45:53 +0000 (07:45 +0200)]
brcmfmac: Fix a memory leak in error handling path in 'brcmf_cfg80211_attach'
commit
57c00f2fac512837f8de73474ec1f54020015bae upstream.
If 'wiphy_new()' fails, we leak 'ops'. Add a new label in the error
handling path to free it in such a case.
Fixes:
5c22fb85102a7 ("brcmfmac: add wowl gtk rekeying offload support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arend van Spriel [Fri, 7 Jul 2017 20:09:06 +0000 (21:09 +0100)]
brcmfmac: fix possible buffer overflow in brcmf_cfg80211_mgmt_tx()
commit
8f44c9a41386729fea410e688959ddaa9d51be7c upstream.
The lower level nl80211 code in cfg80211 ensures that "len" is between
25 and NL80211_ATTR_FRAME (2304). We subtract DOT11_MGMT_HDR_LEN (24) from
"len" so thats's max of 2280. However, the action_frame->data[] buffer is
only BRCMF_FIL_ACTION_FRAME_SIZE (1800) bytes long so this memcpy() can
overflow.
memcpy(action_frame->data, &buf[DOT11_MGMT_HDR_LEN],
le16_to_cpu(action_frame->len));
Fixes:
18e2f61db3b70 ("brcmfmac: P2P action frame tx.")
Reported-by: "freenerguo(郭大兴)" <freenerguo@tencent.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sowmini Varadhan [Thu, 6 Jul 2017 15:15:06 +0000 (08:15 -0700)]
rds: tcp: use sock_create_lite() to create the accept socket
commit
0933a578cd55b02dc80f219dc8f2efb17ec61c9a upstream.
There are two problems with calling sock_create_kern() from
rds_tcp_accept_one()
1. it sets up a new_sock->sk that is wasteful, because this ->sk
is going to get replaced by inet_accept() in the subsequent ->accept()
2. The new_sock->sk is a leaked reference in sock_graft() which
expects to find a null parent->sk
Avoid these problems by calling sock_create_lite().
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nikolay Aleksandrov [Thu, 6 Jul 2017 12:24:40 +0000 (15:24 +0300)]
vrf: fix bug_on triggered by rx when destroying a vrf
commit
f630c38ef0d785101363a8992bbd4f302180f86f upstream.
When destroying a VRF device we cleanup the slaves in its ndo_uninit()
function, but that causes packets to be switched (skb->dev == vrf being
destroyed) even though we're pass the point where the VRF should be
receiving any packets while it is being dismantled. This causes a BUG_ON
to trigger if we have raw sockets (trace below).
The reason is that the inetdev of the VRF has been destroyed but we're
still sending packets up the stack with it, so let's free the slaves in
the dellink callback as David Ahern suggested.
Note that this fix doesn't prevent packets from going up when the VRF
device is admin down.
[ 35.631371] ------------[ cut here ]------------
[ 35.631603] kernel BUG at net/ipv4/fib_frontend.c:285!
[ 35.631854] invalid opcode: 0000 [#1] SMP
[ 35.631977] Modules linked in:
[ 35.632081] CPU: 2 PID: 22 Comm: ksoftirqd/2 Not tainted 4.12.0-rc7+ #45
[ 35.632247] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 35.632477] task:
ffff88005ad68000 task.stack:
ffff88005ad64000
[ 35.632632] RIP: 0010:fib_compute_spec_dst+0xfc/0x1ee
[ 35.632769] RSP: 0018:
ffff88005ad67978 EFLAGS:
00010202
[ 35.632910] RAX:
0000000000000001 RBX:
ffff880059a7f200 RCX:
0000000000000000
[ 35.633084] RDX:
0000000000000000 RSI:
0000000000000001 RDI:
ffffffff82274af0
[ 35.633256] RBP:
ffff88005ad679f8 R08:
000000000001ef70 R09:
0000000000000046
[ 35.633430] R10:
ffff88005ad679f8 R11:
ffff880037731cb0 R12:
0000000000000001
[ 35.633603] R13:
ffff8800599e3000 R14:
0000000000000000 R15:
ffff8800599cb852
[ 35.634114] FS:
0000000000000000(0000) GS:
ffff88005d900000(0000) knlGS:
0000000000000000
[ 35.634306] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 35.634456] CR2:
00007f3563227095 CR3:
000000000201d000 CR4:
00000000000406e0
[ 35.634632] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 35.634865] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 35.635055] Call Trace:
[ 35.635271] ? __lock_acquire+0xf0d/0x1117
[ 35.635522] ipv4_pktinfo_prepare+0x82/0x151
[ 35.635831] raw_rcv_skb+0x17/0x3c
[ 35.636062] raw_rcv+0xe5/0xf7
[ 35.636287] raw_local_deliver+0x169/0x1d9
[ 35.636534] ip_local_deliver_finish+0x87/0x1c4
[ 35.636820] ip_local_deliver+0x63/0x7f
[ 35.637058] ip_rcv_finish+0x340/0x3a1
[ 35.637295] ip_rcv+0x314/0x34a
[ 35.637525] __netif_receive_skb_core+0x49f/0x7c5
[ 35.637780] ? lock_acquire+0x13f/0x1d7
[ 35.638018] ? lock_acquire+0x15e/0x1d7
[ 35.638259] __netif_receive_skb+0x1e/0x94
[ 35.638502] ? __netif_receive_skb+0x1e/0x94
[ 35.638748] netif_receive_skb_internal+0x74/0x300
[ 35.639002] ? dev_gro_receive+0x2ed/0x411
[ 35.639246] ? lock_is_held_type+0xc4/0xd2
[ 35.639491] napi_gro_receive+0x105/0x1a0
[ 35.639736] receive_buf+0xc32/0xc74
[ 35.639965] ? detach_buf+0x67/0x153
[ 35.640201] ? virtqueue_get_buf_ctx+0x120/0x176
[ 35.640453] virtnet_poll+0x128/0x1c5
[ 35.640690] net_rx_action+0x103/0x343
[ 35.640932] __do_softirq+0x1c7/0x4b7
[ 35.641171] run_ksoftirqd+0x23/0x5c
[ 35.641403] smpboot_thread_fn+0x24f/0x26d
[ 35.641646] ? sort_range+0x22/0x22
[ 35.641878] kthread+0x129/0x131
[ 35.642104] ? __list_add+0x31/0x31
[ 35.642335] ? __list_add+0x31/0x31
[ 35.642568] ret_from_fork+0x2a/0x40
[ 35.642804] Code: 05 bd 87 a3 00 01 e8 1f ef 98 ff 4d 85 f6 48 c7 c7 f0 4a 27 82 41 0f 94 c4 31 c9 31 d2 41 0f b6 f4 e8 04 71 a1 ff 45 84 e4 74 02 <0f> 0b 0f b7 93 c4 00 00 00 4d 8b a5 80 05 00 00 48 03 93 d0 00
[ 35.644342] RIP: fib_compute_spec_dst+0xfc/0x1ee RSP:
ffff88005ad67978
Fixes:
193125dbd8eb ("net: Introduce VRF device driver")
Reported-by: Chris Cormier <chriscormier@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Ahern [Wed, 5 Jul 2017 20:41:46 +0000 (14:41 -0600)]
net: ipv6: Compare lwstate in detecting duplicate nexthops
commit
f06b7549b79e29a672336d4e134524373fb7a232 upstream.
Lennert reported a failure to add different mpls encaps in a multipath
route:
$ ip -6 route add 1234::/16 \
nexthop encap mpls 10 via fe80::1 dev ens3 \
nexthop encap mpls 20 via fe80::1 dev ens3
RTNETLINK answers: File exists
The problem is that the duplicate nexthop detection does not compare
lwtunnel configuration. Add it.
Fixes:
19e42e451506 ("ipv6: support for fib route lwtunnel encap attributes")
Signed-off-by: David Ahern <dsahern@gmail.com>
Reported-by: João Taveira Araújo <joao.taveira@gmail.com>
Reported-by: Lennert Buytenhek <buytenh@wantstofly.org>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Tested-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alban Browaeys [Mon, 3 Jul 2017 01:20:13 +0000 (03:20 +0200)]
net: core: Fix slab-out-of-bounds in netdev_stats_to_stats64
commit
9af9959e142c274f4a30fefb71d97d2b028b337f upstream.
commit
9256645af098 ("net/core: relax BUILD_BUG_ON in
netdev_stats_to_stats64") made an attempt to read beyond
the size of the source a possibility.
Fix to only copy src size to dest. As dest might be bigger than src.
==================================================================
BUG: KASAN: slab-out-of-bounds in netdev_stats_to_stats64+0xe/0x30 at addr
ffff8801be248b20
Read of size 192 by task VBoxNetAdpCtl/6734
CPU: 1 PID: 6734 Comm: VBoxNetAdpCtl Tainted: G O 4.11.4prahal+intel+ #118
Hardware name: LENOVO 20CDCTO1WW/20CDCTO1WW, BIOS GQET52WW (1.32 ) 05/04/2017
Call Trace:
dump_stack+0x63/0x86
kasan_object_err+0x1c/0x70
kasan_report+0x270/0x520
? netdev_stats_to_stats64+0xe/0x30
? sched_clock_cpu+0x1b/0x190
? __module_address+0x3e/0x3b0
? unwind_next_frame+0x1ea/0xb00
check_memory_region+0x13c/0x1a0
memcpy+0x23/0x50
netdev_stats_to_stats64+0xe/0x30
dev_get_stats+0x1b9/0x230
rtnl_fill_stats+0x44/0xc00
? nla_put+0xc6/0x130
rtnl_fill_ifinfo+0xe9e/0x3700
? rtnl_fill_vfinfo+0xde0/0xde0
? sched_clock+0x9/0x10
? sched_clock+0x9/0x10
? sched_clock_local+0x120/0x130
? __module_address+0x3e/0x3b0
? unwind_next_frame+0x1ea/0xb00
? sched_clock+0x9/0x10
? sched_clock+0x9/0x10
? sched_clock_cpu+0x1b/0x190
? VBoxNetAdpLinuxIOCtlUnlocked+0x14b/0x280 [vboxnetadp]
? depot_save_stack+0x1d8/0x4a0
? depot_save_stack+0x34f/0x4a0
? depot_save_stack+0x34f/0x4a0
? save_stack+0xb1/0xd0
? save_stack_trace+0x16/0x20
? save_stack+0x46/0xd0
? kasan_slab_alloc+0x12/0x20
? __kmalloc_node_track_caller+0x10d/0x350
? __kmalloc_reserve.isra.36+0x2c/0xc0
? __alloc_skb+0xd0/0x560
? rtmsg_ifinfo_build_skb+0x61/0x120
? rtmsg_ifinfo.part.25+0x16/0xb0
? rtmsg_ifinfo+0x47/0x70
? register_netdev+0x15/0x30
? vboxNetAdpOsCreate+0xc0/0x1c0 [vboxnetadp]
? vboxNetAdpCreate+0x210/0x400 [vboxnetadp]
? VBoxNetAdpLinuxIOCtlUnlocked+0x14b/0x280 [vboxnetadp]
? do_vfs_ioctl+0x17f/0xff0
? SyS_ioctl+0x74/0x80
? do_syscall_64+0x182/0x390
? __alloc_skb+0xd0/0x560
? __alloc_skb+0xd0/0x560
? save_stack_trace+0x16/0x20
? init_object+0x64/0xa0
? ___slab_alloc+0x1ae/0x5c0
? ___slab_alloc+0x1ae/0x5c0
? __alloc_skb+0xd0/0x560
? sched_clock+0x9/0x10
? kasan_unpoison_shadow+0x35/0x50
? kasan_kmalloc+0xad/0xe0
? __kmalloc_node_track_caller+0x246/0x350
? __alloc_skb+0xd0/0x560
? kasan_unpoison_shadow+0x35/0x50
? memset+0x31/0x40
? __alloc_skb+0x31f/0x560
? napi_consume_skb+0x320/0x320
? br_get_link_af_size_filtered+0xb7/0x120 [bridge]
? if_nlmsg_size+0x440/0x630
rtmsg_ifinfo_build_skb+0x83/0x120
rtmsg_ifinfo.part.25+0x16/0xb0
rtmsg_ifinfo+0x47/0x70
register_netdevice+0xa2b/0xe50
? __kmalloc+0x171/0x2d0
? netdev_change_features+0x80/0x80
register_netdev+0x15/0x30
vboxNetAdpOsCreate+0xc0/0x1c0 [vboxnetadp]
vboxNetAdpCreate+0x210/0x400 [vboxnetadp]
? vboxNetAdpComposeMACAddress+0x1d0/0x1d0 [vboxnetadp]
? kasan_check_write+0x14/0x20
VBoxNetAdpLinuxIOCtlUnlocked+0x14b/0x280 [vboxnetadp]
? VBoxNetAdpLinuxOpen+0x20/0x20 [vboxnetadp]
? lock_acquire+0x11c/0x270
? __audit_syscall_entry+0x2fb/0x660
do_vfs_ioctl+0x17f/0xff0
? __audit_syscall_entry+0x2fb/0x660
? ioctl_preallocate+0x1d0/0x1d0
? __audit_syscall_entry+0x2fb/0x660
? kmem_cache_free+0xb2/0x250
? syscall_trace_enter+0x537/0xd00
? exit_to_usermode_loop+0x100/0x100
SyS_ioctl+0x74/0x80
? do_sys_open+0x350/0x350
? do_vfs_ioctl+0xff0/0xff0
do_syscall_64+0x182/0x390
entry_SYSCALL64_slow_path+0x25/0x25
RIP: 0033:0x7f7e39a1ae07
RSP: 002b:
00007ffc6f04c6d8 EFLAGS:
00000206 ORIG_RAX:
0000000000000010
RAX:
ffffffffffffffda RBX:
00007ffc6f04c730 RCX:
00007f7e39a1ae07
RDX:
00007ffc6f04c730 RSI:
00000000c0207601 RDI:
0000000000000007
RBP:
00007ffc6f04c700 R08:
00007ffc6f04c780 R09:
0000000000000008
R10:
0000000000000541 R11:
0000000000000206 R12:
0000000000000007
R13:
00000000c0207601 R14:
00007ffc6f04c730 R15:
0000000000000012
Object at
ffff8801be248008, in cache kmalloc-4096 size: 4096
Allocated:
PID = 6734
save_stack_trace+0x16/0x20
save_stack+0x46/0xd0
kasan_kmalloc+0xad/0xe0
__kmalloc+0x171/0x2d0
alloc_netdev_mqs+0x8a7/0xbe0
vboxNetAdpOsCreate+0x65/0x1c0 [vboxnetadp]
vboxNetAdpCreate+0x210/0x400 [vboxnetadp]
VBoxNetAdpLinuxIOCtlUnlocked+0x14b/0x280 [vboxnetadp]
do_vfs_ioctl+0x17f/0xff0
SyS_ioctl+0x74/0x80
do_syscall_64+0x182/0x390
return_from_SYSCALL_64+0x0/0x6a
Freed:
PID = 5600
save_stack_trace+0x16/0x20
save_stack+0x46/0xd0
kasan_slab_free+0x73/0xc0
kfree+0xe4/0x220
kvfree+0x25/0x30
single_release+0x74/0xb0
__fput+0x265/0x6b0
____fput+0x9/0x10
task_work_run+0xd5/0x150
exit_to_usermode_loop+0xe2/0x100
do_syscall_64+0x26c/0x390
return_from_SYSCALL_64+0x0/0x6a
Memory state around the buggy address:
ffff8801be248a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8801be248b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
ffff8801be248b80: 00 00 00 00 00 00 00 00 00 00 00 07 fc fc fc fc
^
ffff8801be248c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8801be248c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Signed-off-by: Alban Browaeys <alban.browaeys@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Benc [Sun, 2 Jul 2017 17:00:57 +0000 (19:00 +0200)]
vxlan: fix hlist corruption
[ Upstream commit
69e766612c4bcb79e19cebed9eed61d4222c1d47 ]
It's not a good idea to add the same hlist_node to two different hash lists.
This leads to various hard to debug memory corruptions.
Fixes:
b1be00a6c39f ("vxlan: support both IPv4 and IPv6 sockets in a single vxlan device")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sabrina Dubroca [Thu, 29 Jun 2017 14:56:54 +0000 (16:56 +0200)]
ipv6: dad: don't remove dynamic addresses if link is down
commit
ec8add2a4c9df723c94a863b8fcd6d93c472deed upstream.
Currently, when the link for $DEV is down, this command succeeds but the
address is removed immediately by DAD (1):
ip addr add 1111::12/64 dev $DEV valid_lft 3600 preferred_lft 1800
In the same situation, this will succeed and not remove the address (2):
ip addr add 1111::12/64 dev $DEV
ip addr change 1111::12/64 dev $DEV valid_lft 3600 preferred_lft 1800
The comment in addrconf_dad_begin() when !IF_READY makes it look like
this is the intended behavior, but doesn't explain why:
* If the device is not ready:
* - keep it tentative if it is a permanent address.
* - otherwise, kill it.
We clearly cannot prevent userspace from doing (2), but we can make (1)
work consistently with (2).
addrconf_dad_stop() is only called in two cases: if DAD failed, or to
skip DAD when the link is down. In that second case, the fix is to avoid
deleting the address, like we already do for permanent addresses.
Fixes:
3c21edbd1137 ("[IPV6]: Defer IPv6 device initialization until the link becomes ready.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gal Pressman [Sun, 25 Jun 2017 13:46:25 +0000 (16:46 +0300)]
net/mlx5e: Fix TX carrier errors report in get stats ndo
commit
8ff93de7668bd81bc8efa819d1184ebd48fae72d upstream.
Symbol error during carrier counter from PPCNT was mistakenly reported as
TX carrier errors in get_stats ndo, although it's an RX counter.
Fixes:
269e6b3af3bf ("net/mlx5e: Report additional error statistics in get stats ndo")
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Derek Chickles [Wed, 5 Jul 2017 18:59:27 +0000 (11:59 -0700)]
liquidio: fix bug in soft reset failure detection
commit
05a6b4cae8c0cc1680c9dd33a97a49a13c0f01bc upstream.
The code that detects a failed soft reset of Octeon is comparing the wrong
value against the reset value of the Octeon SLI_SCRATCH_1 register,
resulting in an inability to detect a soft reset failure. Fix it by using
the correct value in the comparison, which is any non-zero value.
Fixes:
f21fb3ed364b ("Add support of Cavium Liquidio ethernet adapters")
Fixes:
c0eab5b3580a ("liquidio: CN23XX firmware download")
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mohamad Haj Yahia [Thu, 30 Mar 2017 14:09:00 +0000 (17:09 +0300)]
net/mlx5: Cancel delayed recovery work when unloading the driver
commit
2a0165a034ac024b60cca49c61e46f4afa2e4d98 upstream.
Draining the health workqueue will ignore future health works including
the one that report hardware failure and thus we can't enter error state
Instead cancel the recovery flow and make sure only recovery flow won't
be scheduled.
Fixes:
5e44fca50470 ('net/mlx5: Only cancel recovery work when cleaning up device')
Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michal Kubeček [Thu, 29 Jun 2017 09:13:36 +0000 (11:13 +0200)]
net: handle NAPI_GRO_FREE_STOLEN_HEAD case also in napi_frags_finish()
commit
e44699d2c28067f69698ccb68dd3ddeacfebc434 upstream.
Recently I started seeing warnings about pages with refcount -1. The
problem was traced to packets being reused after their head was merged into
a GRO packet by skb_gro_receive(). While bisecting the issue pointed to
commit
c21b48cc1bbf ("net: adjust skb->truesize in ___pskb_trim()") and
I have never seen it on a kernel with it reverted, I believe the real
problem appeared earlier when the option to merge head frag in GRO was
implemented.
Handling NAPI_GRO_FREE_STOLEN_HEAD state was only added to GRO_MERGED_FREE
branch of napi_skb_finish() so that if the driver uses napi_gro_frags()
and head is merged (which in my case happens after the skb_condense()
call added by the commit mentioned above), the skb is reused including the
head that has been merged. As a result, we release the page reference
twice and eventually end up with negative page refcount.
To fix the problem, handle NAPI_GRO_FREE_STOLEN_HEAD in napi_frags_finish()
the same way it's done in napi_skb_finish().
Fixes:
d7e8883cfcf4 ("net: make GRO aware of skb->head_frag")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Borkmann [Thu, 29 Jun 2017 01:04:59 +0000 (03:04 +0200)]
bpf: prevent leaking pointer via xadd on unpriviledged
commit
6bdf6abc56b53103324dfd270a86580306e1a232 upstream.
Leaking kernel addresses on unpriviledged is generally disallowed,
for example, verifier rejects the following:
0: (b7) r0 = 0
1: (18) r2 = 0xffff897e82304400
3: (7b) *(u64 *)(r1 +48) = r2
R2 leaks addr into ctx
Doing pointer arithmetic on them is also forbidden, so that they
don't turn into unknown value and then get leaked out. However,
there's xadd as a special case, where we don't check the src reg
for being a pointer register, e.g. the following will pass:
0: (b7) r0 = 0
1: (7b) *(u64 *)(r1 +48) = r0
2: (18) r2 = 0xffff897e82304400 ; map
4: (db) lock *(u64 *)(r1 +48) += r2
5: (95) exit
We could store the pointer into skb->cb, loose the type context,
and then read it out from there again to leak it eventually out
of a map value. Or more easily in a different variant, too:
0: (bf) r6 = r1
1: (7a) *(u64 *)(r10 -8) = 0
2: (bf) r2 = r10
3: (07) r2 += -8
4: (18) r1 = 0x0
6: (85) call bpf_map_lookup_elem#1
7: (15) if r0 == 0x0 goto pc+3
R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R6=ctx R10=fp
8: (b7) r3 = 0
9: (7b) *(u64 *)(r0 +0) = r3
10: (db) lock *(u64 *)(r0 +0) += r6
11: (b7) r0 = 0
12: (95) exit
from 7 to 11: R0=inv,min_value=0,max_value=0 R6=ctx R10=fp
11: (b7) r0 = 0
12: (95) exit
Prevent this by checking xadd src reg for pointer types. Also
add a couple of test cases related to this.
Fixes:
1be7f75d1668 ("bpf: enable non-root eBPF programs")
Fixes:
17a5267067f3 ("bpf: verifier (add verifier core)")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Wed, 28 Jun 2017 11:44:21 +0000 (14:44 +0300)]
rocker: move dereference before free
commit
acb4b7df48b539cb391287921de57e4e5fae3460 upstream.
My static checker complains that ofdpa_neigh_del() can sometimes free
"found". It just makes sense to use it first before deleting it.
Fixes:
ecf244f753e0 ("rocker: fix maybe-uninitialized warning")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Tue, 11 Jul 2017 21:55:12 +0000 (14:55 -0700)]
bridge: mdb: fix leak on complete_info ptr on fail path
commit
1bfb159673957644951ab0a8d2aec44b93ddb1ae upstream.
We currently get the following kmemleak report:
unreferenced object 0xffff8800039d9820 (size 32):
comm "softirq", pid 0, jiffies
4295212383 (age 792.416s)
hex dump (first 32 bytes):
00 0c e0 03 00 88 ff ff ff 02 00 00 00 00 00 00 ................
00 00 00 01 ff 11 00 02 86 dd 00 00 ff ff ff ff ................
backtrace:
[<
ffffffff8152b4aa>] kmemleak_alloc+0x4a/0xa0
[<
ffffffff811d8ec8>] kmem_cache_alloc_trace+0xb8/0x1c0
[<
ffffffffa0389683>] __br_mdb_notify+0x2a3/0x300 [bridge]
[<
ffffffffa038a0ce>] br_mdb_notify+0x6e/0x70 [bridge]
[<
ffffffffa0386479>] br_multicast_add_group+0x109/0x150 [bridge]
[<
ffffffffa0386518>] br_ip6_multicast_add_group+0x58/0x60 [bridge]
[<
ffffffffa0387fb5>] br_multicast_rcv+0x1d5/0xdb0 [bridge]
[<
ffffffffa037d7cf>] br_handle_frame_finish+0xcf/0x510 [bridge]
[<
ffffffffa03a236b>] br_nf_hook_thresh.part.27+0xb/0x10 [br_netfilter]
[<
ffffffffa03a3738>] br_nf_hook_thresh+0x48/0xb0 [br_netfilter]
[<
ffffffffa03a3fb9>] br_nf_pre_routing_finish_ipv6+0x109/0x1d0 [br_netfilter]
[<
ffffffffa03a4400>] br_nf_pre_routing_ipv6+0xd0/0x14c [br_netfilter]
[<
ffffffffa03a3c27>] br_nf_pre_routing+0x197/0x3d0 [br_netfilter]
[<
ffffffff814a2952>] nf_iterate+0x52/0x60
[<
ffffffff814a29bc>] nf_hook_slow+0x5c/0xb0
[<
ffffffffa037ddf4>] br_handle_frame+0x1a4/0x2c0 [bridge]
This happens when switchdev_port_obj_add() fails. This patch
frees complete_info object in the fail path.
Reviewed-by: Vallish Vaidyeshwara <vallish@amazon.com>
Signed-off-by: Eduardo Valentin <eduval@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Tue, 27 Jun 2017 14:02:20 +0000 (07:02 -0700)]
net: prevent sign extension in dev_get_stats()
commit
6f64ec74515925cced6df4571638b5a099a49aae upstream.
Similar to the fix provided by Dominik Heidler in commit
9b3dc0a17d73 ("l2tp: cast l2tp traffic counter to unsigned")
we need to take care of 32bit kernels in dev_get_stats().
When using atomic_long_read(), we add a 'long' to u64 and
might misinterpret high order bit, unless we cast to unsigned.
Fixes:
caf586e5f23ce ("net: add a core netdev->rx_dropped counter")
Fixes:
015f0688f57ca ("net: net: add a core netdev->tx_dropped counter")
Fixes:
6e7333d315a76 ("net: add rx_nohandler stat counter")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
WANG Cong [Sun, 25 Jun 2017 06:50:30 +0000 (23:50 -0700)]
tcp: reset sk_rx_dst in tcp_disconnect()
commit
d747a7a51b00984127a88113cdbbc26f91e9d815 upstream.
We have to reset the sk->sk_rx_dst when we disconnect a TCP
connection, because otherwise when we re-connect it this
dst reference is simply overridden in tcp_finish_connect().
This fixes a dst leak which leads to a loopback dev refcnt
leak. It is a long-standing bug, Kevin reported a very similar
(if not same) bug before. Thanks to Andrei for providing such
a reliable reproducer which greatly narrows down the problem.
Fixes:
41063e9dd119 ("ipv4: Early TCP socket demux.")
Reported-by: Andrei Vagin <avagin@gmail.com>
Reported-by: Kevin Xu <kaiwen.xu@hulu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Richard Cochran [Fri, 23 Jun 2017 15:51:31 +0000 (17:51 +0200)]
net: dp83640: Avoid NULL pointer dereference.
commit
db9d8b29d19d2801793e4419f4c6272bf8951c62 upstream.
The function, skb_complete_tx_timestamp(), used to allow passing in a
NULL pointer for the time stamps, but that was changed in commit
62bccb8cdb69051b95a55ab0c489e3cab261c8ef ("net-timestamp: Make the
clone operation stand-alone from phy timestamping"), and the existing
call sites, all of which are in the dp83640 driver, were fixed up.
Even though the kernel-doc was subsequently updated in commit
7a76a021cd5a292be875fbc616daf03eab1e6996 ("net-timestamp: Update
skb_complete_tx_timestamp comment"), still a bug fix from Manfred
Rudigier came into the driver using the old semantics. Probably
Manfred derived that patch from an older kernel version.
This fix should be applied to the stable trees as well.
Fixes:
81e8f2e930fe ("net: dp83640: Fix tx timestamp overflow handling.")
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
WANG Cong [Wed, 21 Jun 2017 21:34:58 +0000 (14:34 -0700)]
ipv6: avoid unregistering inet6_dev for loopback
commit
60abc0be96e00ca71bac083215ac91ad2e575096 upstream.
The per netns loopback_dev->ip6_ptr is unregistered and set to
NULL when its mtu is set to smaller than IPV6_MIN_MTU, this
leads to that we could set rt->rt6i_idev NULL after a
rt6_uncached_list_flush_dev() and then crash after another
call.
In this case we should just bring its inet6_dev down, rather
than unregistering it, at least prior to commit
176c39af29bc
("netns: fix addrconf_ifdown kernel panic") we always
override the case for loopback.
Thanks a lot to Andrey for finding a reliable reproducer.
Fixes:
176c39af29bc ("netns: fix addrconf_ifdown kernel panic")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Daniel Lezcano <dlezcano@fr.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zach Brown [Tue, 20 Jun 2017 17:48:11 +0000 (12:48 -0500)]
net/phy: micrel: configure intterupts after autoneg workaround
commit
b866203d872d5deeafcecd25ea429d6748b5bd56 upstream.
The commit ("net/phy: micrel: Add workaround for bad autoneg") fixes an
autoneg failure case by resetting the hardware. This turns off
intterupts. Things will work themselves out if the phy polls, as it will
figure out it's state during a poll. However if the phy uses only
intterupts, the phy will stall, since interrupts are off. This patch
fixes the issue by calling config_intr after resetting the phy.
Fixes:
d2fd719bcb0e ("net/phy: micrel: Add workaround for bad autoneg ")
Signed-off-by: Zach Brown <zach.brown@ni.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gao Feng [Wed, 28 Jun 2017 04:53:54 +0000 (12:53 +0800)]
net: sched: Fix one possible panic when no destroy callback
commit
c1a4872ebfb83b1af7144f7b29ac8c4b344a12a8 upstream.
When qdisc fail to init, qdisc_create would invoke the destroy callback
to cleanup. But there is no check if the callback exists really. So it
would cause the panic if there is no real destroy callback like the qdisc
codel, fq, and so on.
Take codel as an example following:
When a malicious user constructs one invalid netlink msg, it would cause
codel_init->codel_change->nla_parse_nested failed.
Then kernel would invoke the destroy callback directly but qdisc codel
doesn't define one. It causes one panic as a result.
Now add one the check for destroy to avoid the possible panic.
Fixes:
87b60cfacf9f ("net_sched: fix error recovery at qdisc creation")
Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Fri, 10 Feb 2017 18:31:49 +0000 (10:31 -0800)]
net_sched: fix error recovery at qdisc creation
commit
87b60cfacf9f17cf71933c6e33b66e68160af71d upstream.
Dmitry reported uses after free in qdisc code [1]
The problem here is that ops->init() can return an error.
qdisc_create_dflt() then call ops->destroy(),
while qdisc_create() does _not_ call it.
Four qdisc chose to call their own ops->destroy(), assuming their caller
would not.
This patch makes sure qdisc_create() calls ops->destroy()
and fixes the four qdisc to avoid double free.
[1]
BUG: KASAN: use-after-free in mq_destroy+0x242/0x290 net/sched/sch_mq.c:33 at addr
ffff8801d415d440
Read of size 8 by task syz-executor2/5030
CPU: 0 PID: 5030 Comm: syz-executor2 Not tainted 4.3.5-smp-DEV #119
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
0000000000000046 ffff8801b435b870 ffffffff81bbbed4 ffff8801db000400
ffff8801d415d440 ffff8801d415dc40 ffff8801c4988510 ffff8801b435b898
ffffffff816682b1 ffff8801b435b928 ffff8801d415d440 ffff8801c49880c0
Call Trace:
[<
ffffffff81bbbed4>] __dump_stack lib/dump_stack.c:15 [inline]
[<
ffffffff81bbbed4>] dump_stack+0x6c/0x98 lib/dump_stack.c:51
[<
ffffffff816682b1>] kasan_object_err+0x21/0x70 mm/kasan/report.c:158
[<
ffffffff81668524>] print_address_description mm/kasan/report.c:196 [inline]
[<
ffffffff81668524>] kasan_report_error+0x1b4/0x4b0 mm/kasan/report.c:285
[<
ffffffff81668953>] kasan_report mm/kasan/report.c:305 [inline]
[<
ffffffff81668953>] __asan_report_load8_noabort+0x43/0x50 mm/kasan/report.c:326
[<
ffffffff82527b02>] mq_destroy+0x242/0x290 net/sched/sch_mq.c:33
[<
ffffffff82524bdd>] qdisc_destroy+0x12d/0x290 net/sched/sch_generic.c:953
[<
ffffffff82524e30>] qdisc_create_dflt+0xf0/0x120 net/sched/sch_generic.c:848
[<
ffffffff8252550d>] attach_default_qdiscs net/sched/sch_generic.c:1029 [inline]
[<
ffffffff8252550d>] dev_activate+0x6ad/0x880 net/sched/sch_generic.c:1064
[<
ffffffff824b1db1>] __dev_open+0x221/0x320 net/core/dev.c:1403
[<
ffffffff824b24ce>] __dev_change_flags+0x15e/0x3e0 net/core/dev.c:6858
[<
ffffffff824b27de>] dev_change_flags+0x8e/0x140 net/core/dev.c:6926
[<
ffffffff824f5bf6>] dev_ifsioc+0x446/0x890 net/core/dev_ioctl.c:260
[<
ffffffff824f61fa>] dev_ioctl+0x1ba/0xb80 net/core/dev_ioctl.c:546
[<
ffffffff82430509>] sock_do_ioctl+0x99/0xb0 net/socket.c:879
[<
ffffffff82430d30>] sock_ioctl+0x2a0/0x390 net/socket.c:958
[<
ffffffff816f3b68>] vfs_ioctl fs/ioctl.c:44 [inline]
[<
ffffffff816f3b68>] do_vfs_ioctl+0x8a8/0xe50 fs/ioctl.c:611
[<
ffffffff816f41a4>] SYSC_ioctl fs/ioctl.c:626 [inline]
[<
ffffffff816f41a4>] SyS_ioctl+0x94/0xc0 fs/ioctl.c:617
[<
ffffffff8123e357>] entry_SYSCALL_64_fastpath+0x12/0x17
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vineeth Remanan Pillai [Tue, 7 Feb 2017 18:59:01 +0000 (18:59 +0000)]
xen-netfront: Rework the fix for Rx stall during OOM and network stress
commit
538d92912d3190a1dd809233a0d57277459f37b2 upstream.
The commit
90c311b0eeea ("xen-netfront: Fix Rx stall during network
stress and OOM") caused the refill timer to be triggerred almost on
all invocations of xennet_alloc_rx_buffers for certain workloads.
This reworks the fix by reverting to the old behaviour and taking into
consideration the skb allocation failure. Refill timer is now triggered
on insufficient requests or skb allocation failure.
Signed-off-by: Vineeth Remanan Pillai <vineethp@amazon.com>
Fixes:
90c311b0eeea (xen-netfront: Fix Rx stall during network stress and OOM)
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Eduardo Valentin <eduval@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 15 Jul 2017 10:17:55 +0000 (12:17 +0200)]
Linux 4.9.38
Maciej S. Szmigiero [Sat, 2 Jul 2016 23:27:46 +0000 (20:27 -0300)]
saa7134: fix warm Medion 7134 EEPROM read
commit
5a91206ff0d0548939f3e85a65fb76b400fb0e89 upstream.
When saa7134 module driving a Medion 7134 card is reloaded reads of this
card EEPROM (required for automatic detection of tuner model) will be
corrupted due to I2C gate in DVB-T demod being left closed.
This sometimes also happens on first saa7134 module load after a warm
reboot.
Fix this by opening this I2C gate before doing EEPROM read during i2c
initialization.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Tue, 4 Jul 2017 23:04:23 +0000 (19:04 -0400)]
x86/mm/pat: Don't report PAT on CPUs that don't support it
commit
99c13b8c8896d7bcb92753bf0c63a8de4326e78d upstream.
The pat_enabled() logic is broken on CPUs which do not support PAT and
where the initialization code fails to call pat_init(). Due to that the
enabled flag stays true and pat_enabled() returns true wrongfully.
As a consequence the mappings, e.g. for Xorg, are set up with the wrong
caching mode and the required MTRR setups are omitted.
To cure this the following changes are required:
1) Make pat_enabled() return true only if PAT initialization was
invoked and successful.
2) Invoke init_cache_modes() unconditionally in setup_arch() and
remove the extra callsites in pat_disable() and the pat disabled
code path in pat_init().
Also rename __pat_enabled to pat_disabled to reflect the real purpose of
this variable.
Fixes:
9cd25aac1f44 ("x86/mm/pat: Emulate PAT when it is disabled")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bernhard Held <berny156@gmx.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: "Luis R. Rodriguez" <mcgrof@suse.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1707041749300.3456@file01.intranet.prod.int.rdu2.redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chao Yu [Fri, 23 Jun 2017 05:08:22 +0000 (01:08 -0400)]
ext4: check return value of kstrtoull correctly in reserved_clusters_store
commit
1ea1516fbbab2b30bf98c534ecaacba579a35208 upstream.
kstrtoull returns 0 on success, however, in reserved_clusters_store we
will return -EINVAL if kstrtoull returns 0, it makes us fail to update
reserved_clusters value through sysfs.
Fixes:
76d33bca5581b1dd5c3157fa168db849a784ada4
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Miao Xie <miaoxie@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason A. Donenfeld [Sun, 11 Jun 2017 21:20:23 +0000 (23:20 +0200)]
crypto: rsa-pkcs1pad - use constant time memory comparison for MACs
commit
fec17cb2231733174e039ad9054fa16bb358e2ec upstream.
Otherwise, we enable all sorts of forgeries via timing attack.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Suggested-by: Stephan Müller <smueller@chronox.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Horia Geantă [Mon, 19 Jun 2017 08:44:45 +0000 (11:44 +0300)]
crypto: caam - fix gfp allocation flags (part I)
commit
42cfcafb91dabb0f9d9e08396c39824535948c67 upstream.
Changes in the SW cts (ciphertext stealing) code in
commit
0605c41cc53ca ("crypto: cts - Convert to skcipher")
revealed a problem in the CAAM driver:
when cts(cbc(aes)) is executed and cts runs in SW,
cbc(aes) is offloaded in CAAM; cts encrypts the last block
in atomic context and CAAM incorrectly decides to use GFP_KERNEL
for memory allocation.
Fix this by allowing GFP_KERNEL (sleeping) only when MAY_SLEEP flag is
set, i.e. remove MAY_BACKLOG flag.
We split the fix in two parts - first is sent to -stable, while the
second is not (since there is no known failure case).
Link: http://lkml.kernel.org/g/20170602122446.2427-1-david@sigma-star.at
Reported-by: David Gstir <david@sigma-star.at>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 16 Jun 2017 18:35:34 +0000 (19:35 +0100)]
staging: comedi: fix clean-up of comedi_class in comedi_init()
commit
a9332e9ad09c2644c99058fcf6ae2f355e93ce74 upstream.
There is a clean-up bug in the core comedi module initialization
functions, `comedi_init()`. If the `comedi_num_legacy_minors` module
parameter is non-zero (and valid), it creates that many "legacy" devices
and registers them in SysFS. A failure causes the function to clean up
and return an error. Unfortunately, it fails to destroy the "comedi"
class that was created earlier. Fix it by adding a call to
`class_destroy(comedi_class)` at the appropriate place in the clean-up
sequence.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sat, 29 Apr 2017 12:03:44 +0000 (13:03 +0100)]
staging: vt6556: vnt_start Fix missing call to vnt_key_init_table.
commit
dc32190f2cd41c7dba25363ea7d618d4f5172b4e upstream.
The key table is not intialized correctly without this call.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kirill Tkhai [Fri, 16 Jun 2017 13:44:34 +0000 (16:44 +0300)]
locking/rwsem-spinlock: Fix EINTR branch in __down_write_common()
commit
a0c4acd2c220376b4e9690e75782d0c0afdaab9f upstream.
If a writer could been woken up, the above branch
if (sem->count == 0)
break;
would have moved us to taking the sem. So, it's
not the time to wake a writer now, and only readers
are allowed now. Thus, 0 must be passed to __rwsem_do_wake().
Next, __rwsem_do_wake() wakes readers unconditionally.
But we mustn't do that if the sem is owned by writer
in the moment. Otherwise, writer and reader own the sem
the same time, which leads to memory corruption in
callers.
rwsem-xadd.c does not need that, as:
1) the similar check is made lockless there,
2) in __rwsem_mark_wake::try_reader_grant we test,
that sem is not owned by writer.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Niklas Cassel <niklas.cassel@axis.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
17fcbd590d0c "locking/rwsem: Fix down_write_killable() for CONFIG_RWSEM_GENERIC_SPINLOCK=y"
Link: http://lkml.kernel.org/r/149762063282.19811.9129615532201147826.stgit@localhost.localdomain
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Yan [Fri, 10 Mar 2017 03:27:23 +0000 (11:27 +0800)]
md: fix super_offset endianness in super_1_rdev_size_change
commit
3fb632e40d7667d8bedfabc28850ac06d5493f54 upstream.
The sb->super_offset should be big-endian, but the rdev->sb_start is in
host byte order, so fix this by adding cpu_to_le64.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Yan [Fri, 10 Mar 2017 03:49:12 +0000 (11:49 +0800)]
md: fix incorrect use of lexx_to_cpu in does_sb_need_changing
commit
1345921393ba23b60d3fcf15933e699232ad25ae upstream.
The sb->layout is of type __le32, so we shoud use le32_to_cpu.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masami Hiramatsu [Wed, 11 Jan 2017 06:00:47 +0000 (15:00 +0900)]
perf probe: Add error checks to offline probe post-processing
commit
3e96dac7c956089d3f23aca98c4dfca57b6aaf8a upstream.
Add error check codes on post processing and improve it for offline
probe events as:
- post processing fails if no matched symbol found in map(-ENOENT)
or strdup() failed(-ENOMEM).
- Even if the symbol name is the same, it updates symbol address
and offset.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/148411443738.9978.4617979132625405545.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masami Hiramatsu [Wed, 4 Jan 2017 03:30:19 +0000 (12:30 +0900)]
perf probe: Fix to probe on gcc generated symbols for offline kernel
commit
8a937a25a7e3c19d5fb3f9d92f605cf5fda219d8 upstream.
Fix perf-probe to show probe definition on gcc generated symbols for
offline kernel (including cross-arch kernel image).
gcc sometimes optimizes functions and generate new symbols with suffixes
such as ".constprop.N" or ".isra.N" etc. Since those symbol names are
not recorded in DWARF, we have to find correct generated symbols from
offline ELF binary to probe on it (kallsyms doesn't correct it). For
online kernel or uprobes we don't need it because those are rebased on
_text, or a section relative address.
E.g. Without this:
$ perf probe -k build-arm/vmlinux -F __slab_alloc*
__slab_alloc.constprop.9
$ perf probe -k build-arm/vmlinux -D __slab_alloc
p:probe/__slab_alloc __slab_alloc+0
If you put above definition on target machine, it should fail
because there is no __slab_alloc in kallsyms.
With this fix, perf probe shows correct probe definition on
__slab_alloc.constprop.9:
$ perf probe -k build-arm/vmlinux -D __slab_alloc
p:probe/__slab_alloc __slab_alloc.constprop.9+0
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/148350060434.19001.11864836288580083501.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / platform / kernel / linux-amlogic.git / log