drm/amd/display: Power down hardware if timer not trigger

[WHY]
In headless systems, if SetMode/Power down timer
is not called, hardware will not be powered down
causing HW/SW discrepancies. Powering down hardware
on SetPowerState to D3 will ensure SW/HW state is accurate.

[HOW]
If PowerDownThread timer is not trigger but OS call
SetPowerState to D3, power down hardware.

Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Correct Slice reset calculation

[Why]
Once DSC slice cannot fit pixel clock, we incorrectly
reset min slices to 0 and allow max slice to operate,
even when max slice itself cannot fit the pixel clock
properly.

[How]
Change the sequence such that we correctly determine
DSC is not possible when both min slices and max
slices cannot fit pixel clock per slice.

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chris Park <Chris.Park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable 3-plane MPO for DCN31

[WHY&HOW]
It can be enabled by users, but proper way is to report max_slave_planes
in DC caps for each ASIC.
Some structures use hardcoded max_plane=2, this is also addressed here.

Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Set fec register init value

[Why]
We don't include this eDP FEC init on fastboot.

[How]
Set the fec to init value when stopping driver &get the fec register value to check should enable FEC.

Co-authored-by: Jingwen Zhu <Jingwen.Zhu@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Jingwen Zhu <Jingwen.Zhu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove SW w/a for HDCP 1.4 1A-07 failure based on ECO fix

[why]
W/a no longer needed

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Oliver Logush <oliver.logush@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Create underflow interrupt IRQ type

[WHY]
We want another entry in IRQ type that can be used to
help find the underflow interrupt source.

[HOW]
Added another mapping in IRQ type enum.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Angus Wang <Angus.Wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/jpeg: Add jpeg ras error query support

RAS error query support addition for JPEG 2.6

V2: removed unused options and corrected comment format.
Moved register definition to header file.

V3: poison query status check added.
Removed the error query support

V4: Return statement refactored.

Signed-off-by: Mohammad Zafar Ziya <Mohammadzafar.ziya@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: Add VCN ras error query support

RAS error query support addition for VCN 2.6

V2: removed unused option and corrected comment format
Moved the register definition under header file

V3: poison query status check added.
Removed error query interface

V4: MMSCH poison check option removed, return true/false refactored.

Signed-off-by: Mohammad Zafar Ziya <Mohammadzafar.ziya@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: Add vcn and jpeg ver 2.6 ras register definition

Adding vcn and jpeg ver 2.6 ras register definition

Signed-off-by: Mohammad Zafar Ziya <Mohammadzafar.ziya@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/jpeg: Add jpeg block ras support

Ras support addition for JPEG block

V2: removed default callback

Signed-off-by: Mohammad Zafar Ziya <Mohammadzafar.ziya@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: Add vcn ras support

VCN block ras feature support addition

V2: default ras callback removed

Signed-off-by: Mohammad Zafar Ziya <Mohammadzafar.ziya@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add vcn and jpeg ras support flag

Add vcn and jpeg ras support options

V2: vcn and jpeg ras flag enabled for aldebaran asic only

V3: vcn and jpeg ras flag disabled for error counter query
Generic poison query interface added
VCN and JPEG ras enabled based on IP version check

V4: vcn and jpeg ras flag moved under ecc flag for dGPU

Signed-off-by: Mohammad Zafar Ziya <Mohammadzafar.ziya@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/vcn: fix an error msg on vcn 3.0

Some video card has more than one vcn instance, passing 0 to
vcn_v3_0_pause_dpg_mode is incorrect.

Error msg:
Register(1) [mmUVD_POWER_STATUS] failed to reach value
0x00000001 != 0x00000002

Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: tiancyin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Re-classify some log messages in commit path

ATOMIC and DRIVER log categories do not typically contain per-frame log
messages. This patch re-classifies some messages in amd to chattier
categories to keep ATOMIC/DRIVER quiet.

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Check feature support using IP version

Instead of ASIC type, use GC and MP1 IP versions for feature support checks.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kevin Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn3: send smu interface type

For VCN FW to detect ASIC type, in order to use different mailbox registers.

V2: simplify codes and fix format issue.

Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/pm: Implement emit_clk_levels for vega10

   (v1)
     - implement emit_clk_levels for vega10, based on print_clk_levels,
       but using sysfs_emit rather than sprintf
     - modify local int vars to use uint32_t to match arg type of
       called functions
     - add return of error codes
     - refactor OD_XXX cases to return early with -EOPNOTSUPP if
       !(hwmgr->od_enabled)

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/pm: Add new hwmgr API function "emit_clock_levels"

 Extend commit 7f36948c92b2 ("amdgpu/pm: Implement new API function "emit" that accepts buffer base and write offset")
   Add new hwmgr API function "emit_clock_levels"
   - add member emit_clock_levels to pp_hwmgr_func
   - Implemented pp_dpm_emit_clock_levels
   - add pp_dpm_emit_clock_levels to pp_dpm_funcs

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove table_freed param from the VM code

Better to leave the decision when to flush the VM changes in the TLB to
the VM code.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Philip Yang<Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: use tlb_seq from the VM subsystem for SVM as well v2

Instead of hand rolling the table_freed parameter.

v2: add some changes suggested by Philip

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Philip Yang<Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: start using tlb_seq from the VM subsystem

Instead of trying to figure out if a TLB flush is necessary or not use
the information provided by the VM subsystem now.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Philip Yang<Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: rework TLB flushing

Instead of tracking the VM updates through the dependencies just use a
sequence counter for page table updates which indicates the need to
flush the TLB.

This reduces the need to flush the TLB drastically.

v2: squash in NULL check fix (Christian)

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: simplify VM update tracking a bit

Store the 64bit sequence directly. Makes it simpler to use and saves a bit
of fence reference counting overhead.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: separate VM PT handling into amdgpu_vm_pt.c

Separate the VM page table backend operations from the state machine since
the amdgpu_vm.c file is becoming to complex.

The allocating, freeing and updating page tables and page directories can
easily be moved into a separate file.

While at it cleanup everything checkpatch.pl reported and rename the
functions a bit to make more clear that they belong together.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move VM PDEs to idle after update

Move the page tables to the idle list after updating the PDEs.

We have gone back and forth with that a couple of times because of problems
with the inter PD dependencies, but it should work now that we have the
state handling cleanly separated.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move FPU related code from dcn316 to dml/dcn31 folder

Moves FPU-related structs and dcn316_update_bw_bounding_box from dcn316
driver to dml/dcn31 that centralize FPU operations for DCN 3.1x

Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move FPU related code from dcn315 to dml/dcn31 folder

Moves related structs and dcn315_update_bw_bounding_box from dcn315
driver code to dml/dcn31_fpu that centralizes FPU code for DCN 3.1x.

Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folder

Creates FPU files in dml/dcn31 folder to centralize FPU operations
from 3.1x drivers and moves all FPU-associated code from dcn31 driver
to there. It includes the struct _vcs_dpi_ip_params_st and
_vcs_dpi_soc_bounding_box_st and functions:

- dcn31_calculate_wm_and_dlg_fp()
- dcn31_update_bw_bounding_box()

adding dc_assert_fp_enabled to them and drop DC_FP_START/END inside
functions that was moved to dml folder, as required.

Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.178

This version brings along following fixes:
- HDCP SEND AKI INIT error
- fix audio format not updated after edid updated
- Reduce stack size
- FEC check in timing validation
- Add fSMC_MSG_SetDtbClk support
- Update VTEM Infopacket definition
- [FW Promotion] Release 0.0.109.0

Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.109.0

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: print unmap queue status for RAS poison consumption (v3)

Print the status out when it passes, and also tell user gpu reset
is triggered when we fall back to legacy way.

v2: make the message more explicit.
v3: change succeeds to succeeded.
    replace pr_warn with dev_warn.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix HDCP SEND AKI INIT error

[why]
HDCP sends AKI INIT error in case of multiple display on dock

[how]
Add new checks and method to handle display adjustment
for multiple display cases

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ahmad Othman <ahmad.othman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: drop redundant check of harvest info

Harvest bit setting in IP data structure promises this,
so no need to set it explicitly.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix spelling mistake "regiser" -> "register"

There is a spelling mistake in a dev_error error message. Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: add RAS poison consumption handling for UTCL2 (v2)

Do RAS page retirement and use gpu reset as fallback in UTCL2 fault
handler.

v2: replace vm fault event with posion consumed event in UTCL2
poison consumption.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add UTCL2 RAS poison query for Aldebaran (v2)

Add help functions to query and reset RAS UTCL2 poison status.

v2: implement it on amdgpu side and kfd only calls it.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: replace source_id with client_id for RAS poison consumption

Client ID is more accruate here and we can deal with more different
cases with client ID.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: refine event_interrupt_poison_consumption

Combine reading and setting poison flag as one atomic operation
and add print message for the function.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: make amdgpu_display_gem_fb_verify_and_init() static

Unused outside of amdgpu_display.c.

Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: drop amdgpu_display_gem_fb_init()

Unused.

Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: make amdgpu_display_framebuffer_init() static

It's not used outside of amdgpu_display.c.

Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx10: enable gfx1037 clock counter retrieval function

Enable gfx1037 clock counter retrieval function for KFDPerfCountersTest.ClockCountersBasicTest.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: set noretry for gfx 10.3.7

Disable xnack on the gfx10.3.7 for the KFD test.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: set noretry=1 for GFX 10.3.4

Retry faults are not supported on GFX 10.3.4.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: set noretry=1 for gc 10.3.6

this patch to set noretry=1 for gc 10.3.6.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add more cases to noretry=1

Port current list from amd-staging-drm-next.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Check for potential null return of kmalloc_array()

As the kmalloc_array() may return null, the 'event_waiters[i].wait' would lead to null-pointer dereference.
Therefore, it is better to check the return value of kmalloc_array() to avoid this confusion.

Signed-off-by: QintaoShen <unSimple1993@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: improve vcn dpg stop procedure

Prior to disabling dpg, VCN need unpausing dpg mode, or VCN will hang in
S3 resuming.

Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Tianci Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Check use_xgmi_p2p before reporting hive_id

Recently introduced commit 158a05a0b885 ("drm/amdgpu: Add
use_xgmi_p2p module parameter") did not update XGMI iolinks
when use_xgmi_p2p is disabled. Add fix to not create XGMI
iolinks in KFD topology when this parameter is disabled.

Fixes: 158a05a0b885 ("drm/amdgpu: Add use_xgmi_p2p module parameter")
Signed-off-by: Divya Shikre <DivyaUday.Shikre@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix Incorrect VMIDs passed to HWS

Compute-only GPUs have more than 8 VMIDs allocated to KFD. Fix
this by passing correct number of VMIDs to HWS

v2: squash in warning fix (Alex)

Signed-off-by: Tushar Patel <tushar.patel@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove destructive verify link for TMDS

[why and how]
TMDS does not need destructive verify link

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add support for zstate during extended vblank

[why]
When we enter FREESYNC_STATE_VIDEO, we want to use the extra vblank
portion to enter zstate if possible.

[how]
When we enter freesync, a full update is triggered and the new vtotal
with extra lines is passed to dml in a stream update. The time gained
from extra vblank lines is calculated in microseconds. We allow zstate
entry if the time gained is greater than 5 ms, which is the current
policy. Furthermore, an optimized value for min_dst_y_next_start is
calculated and written to its register. When exiting freesync, another
full update is triggered and default values are restored.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: Fix the register setting for vcn1

Correct the code error for setting register UVD_GFX10_ADDR_CONFIG.
Need to use inst_idx, or it only will set VCN0.

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/display: Update VTEM Infopacket definition

[Why & How]
The latest HDMI SPEC has updated the VTEM packet structure,
so change the VTEM Infopacket defined in the driver side to align
with the SPEC.

Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add fSMC_MSG_SetDtbClk support

[why]
Needed to support dcn315

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Oliver Logush <oliver.logush@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: FEC check in timing validation

[Why]
disable/enable leads FEC mismatch between hw/sw FEC state.

[How]
check FEC status to fastboot on/off.

Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reduce stack size

Linux kernel enabled more compilation restrictions related to the stack
size, which caused compilation failures in our code. This commit reduces
the allocation size by allocating the required memory dynamically.

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix audio format not updated after edid updated

[why]
for the case edid change only changed audio format.
driver still need to update stream.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix p-state allow debug index on dcn31

[Why]
It changed since dcn30 but the hubbub31 constructor hasn't been
modified to reflect this.

[How]
Update the value in the constructor to 0x6 so we're checking the right
bits for p-state allow.

It worked before by accident, but can falsely assert 0 depending on HW
state transitions. The most frequent of which appears to be when
all pipes turn off during IGT tests.

Cc: Harry Wentland <harry.wentland@amd.com>
Fixes: e7031d8258f1b4 ("drm/amd/display: Add pstate verification and recovery for DCN31")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pm: add asic smu support check

It must check asic whether support smu
before call smu powerplay function, otherwise
it may cause null point on no support smu asic.

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add workarounds for VCN TMZ issue on CHIP_RAVEN

It is a hardware issue that VCN can't handle a GTT
backing stored TMZ buffer on CHIP_RAVEN series ASIC.

Move such a TMZ buffer to VRAM domain before command
submission as a workaround.

v2:
 - Use patch_cs_in_place callback.

v3:
 - Bail out early if unsecure IBs.

Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu/gmc: use PCI BARs for APUs in passthrough

If the GPU is passed through to a guest VM, use the PCI
BAR for CPU FB access rather than the physical address of
carve out.  The physical address is not valid in a guest.

v2: Fix HDP handing as suggested by Michel

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix off by one in amdgpu_gfx_kiq_acquire()

This post-op should be a pre-op so that we do not pass -1 as the bit
number to test_bit().  The current code will loop downwards from 63 to
-1.  After changing to a pre-op, it loops from 63 to 0.

Fixes: 71c37505e7ea ("drm/amdgpu/gfx: move more common KIQ code to amdgpu_gfx.c")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pm: fix the Stable pstate Test in amdgpu_test

If GFX DPM is disbaled, Stable pstate Test in amdgpu_test fails.
Check GFX DPM statue before change clock level

Log:
[   46.595274] [drm] Initialized amdgpu 3.46.0 20150101 for 0000:02:00.0 on minor 0
[   46.599929] fbcon: amdgpudrmfb (fb0) is primary device
[   46.785753] Console: switching to colour frame buffer device 240x67
[   46.811765] amdgpu 0000:02:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[  131.398407] amdgpu 0000:02:00.0: amdgpu: Failed to set performance level!

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: conduct a proper cleanup of PDB bo

Use amdgpu_bo_free_kernel instead of amdgpu_bo_unref to
perform a proper cleanup of PDB bo.

v2: update subject to be more accurate

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: prevent memory wipe in suspend/shutdown stage

On GPUs with RAS enabled, below call trace is observed when
suspending or shutting down device. The cause is we have enabled
memory wipe flag for BOs on such GPUs by default, and such BOs
will go to memory wipe by amdgpu_fill_buffer, however, because
ring is off already, it fails to clean up the memory and throw
this error message. So add a suspend/shutdown check before
wipping memory.

[drm:amdgpu_fill_buffer [amdgpu]] *ERROR* Trying to clear memory with ring turned off.

v2: fix coding style issue

Fixes: fc6ea4bee13071 ("drm/amdgpu: Wipe all VRAM on free when RAS is enabled")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Add USBC connector ID

[Why&How] Add a dedicated AMDGPU specific ID for use with
newer ASICs that support USB-C output

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'amd-drm-next-5.18-2022-03-18' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.18-2022-03-18:

amdgpu:
- Aldebaran fixes
- SMU 13.0.5 fixes
- DCN 3.1.5 fixes
- DCN 3.1.6 fixes
- Pipe split fixes
- More display FP cleanup
- DP 2.0 UHBR fix
- DC GPU reset fix
- DC deep color ratio fix
- SMU robustness fixes
- Runtime PM fix for APUs
- IGT reload fixes
- SR-IOV fix
- Misc fixes and cleanups

amdkfd:
- CRIU fixes
- SVM fixes

UAPI:
- Properly handle SDMA transfers with CRIU
  Proposed user mode change: https://github.com/checkpoint-restore/criu/pull/1709

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318203717.5833-1-alexander.deucher@amd.com

Merge tag 'drm-intel-next-fixes-2022-03-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Do not re-enable PSR after it was marked as not reliable (Jose)
- Add missing boundary check in vm_access to avoid out-of-bounds access (Mastan)
- Naming fix for HPD short pulse handling for eDP (Jose)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YjLnofpe5sMHX7Pt@jlahtine-mobl.ger.corp.intel.com

drm/i915/display: Do not re-enable PSR after it was marked as not reliable

If a error happens and sink_not_reliable is set, PSR should be disabled
for good but that is not happening.
It would be disabled by the function handling the PSR error but then
on the next fastset it would be enabled again in
_intel_psr_post_plane_update().
It would only be disabled for good in the next modeset where has_psr
will be set false.

v2:
- release psr lock before continue

Fixes: 9ce5884e5139 ("drm/i915/display: Only keep PSR enabled if there is active planes")
Reported-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reported-by: Charlton Lin <charlton.lin@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311185149.110527-2-jose.souza@intel.com
(cherry picked from commit 15f26bdc81f7f03561aaea5a10d87bd6638e1459)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/display: Fix HPD short pulse handling for eDP

Commit 13ea6db2cf24 ("drm/i915/edp: Ignore short pulse when panel
powered off") completely broke short pulse handling for eDP as it is
usually generated by sink when it is displaying image and there is
some error or status that source needs to handle.

When power panel is enabled, this state is enough to power aux
transactions and VDD override is disabled, so intel_pps_have_power()
is always returning false causing short pulses to be ignored.

So here better naming this function that intends to check if aux
lines are powered to avoid the endless cycle mentioned in the commit
being fixed and fixing the check for what it is intended.

v2:
- renamed to intel_pps_have_panel_power_or_vdd()
- fixed indentation

Fixes: 13ea6db2cf24 ("drm/i915/edp: Ignore short pulse when panel powered off")
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311185149.110527-1-jose.souza@intel.com
(cherry picked from commit 8f0c1c0949b609acfad62b8d5f742a3b5e7b05ab)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/amdgpu: Use drm_mode_copy()

struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.

Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.

Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.

@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}

@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)

@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)

@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: Use drm_mode_copy()

struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.

Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.

Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.

@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}

@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)

@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)

@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Use ternary operator in `vcn_v1_0_start()`

Remove the boilerplate of declaring a variable and using an if else
statement by using the ternary operator.

Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove pointless on stack mode copies

These on stack copies of the modes appear to be pointless.
Just look at the originals directly.

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: Nikola Cornij <nikola.cornij@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fix indenting in __smu_cmn_reg_print_error()

Smatch complains that the dev_err_ratelimited() is indented one tab more
than the surrounding lines.

drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu_cmn.c:174
__smu_cmn_reg_print_error() warn: inconsistent indenting

It looks like it's not a bug, just that the indenting needs to be cleaned
up.

Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/dc: fix typos in comments

Various spelling mistakes in comments.
Detected with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix typos in comments

Various spelling mistakes in comments.
Detected with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fix typos in comments

Various spelling mistakes in comments.
Detected with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add stolen reserved memory for MI25 SRIOV.

MI25 SRIOV guest driver loading failed due to allocated memory overlaps
with firmware reserved area.
Allocate stolen reserved memory for MI25 SRIOV specifically to avoid the
memory overlap.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Merge get_reserved_allocation to get_vbios_allocations.

Some ASICs need reserved memory for firmware or other components,
which is not allowed to be used by driver.
amdgpu_gmc_get_reserved_allocation is to handle additional areas.
To avoid any missing calling,
merged amdgpu_gmc_get_reserved_allocation to
amdgpu_gmc_get_vbios_allocations.

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: evict svm bo worker handle error

Migrate vram to ram may fail to find the vma if process is exiting
and vma is removed, evict svm bo worker sets prange->svm_bo to NULL
and warn svm_bo ref count != 1 only if migrating vram to ram
successfully.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: fix vcn ring test failure in igt reload test

[why]
On Renoir, vcn ring test failed on the second time insmod in the reload
test. After investigation, it proves that vcn only can disable dpg under
dpg unpause mode (dpg unpause mode is default for dec only, dpg pause
mode is for dec/enc).

[how]
unpause dpg in dpg stopping procedure.

Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Tianci Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: only allow secure submission on rings which support that

Only GFX ring, SDMA ring and VCN decode ring support secure submission
at the moment.

Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fixed the warnings reported by kernel test robot

The reported warnings are as follows:
  1.warning:no-previous-prototype-for-amdgpu_hdp_ras_fini.
  2.warning:no-previous-prototype-for-amdgpu_mmhub_ras_fini.

Amdgpu_hdp_ras_fini and amdgpu_mmhub_ras_fini are unused
in the code, they are the only functions in amdgpu_hdp.c
and amdgpu_mmhub.c. After removing these two functions,
both amdgpu_hdp.c and amdgpu_mmhub.c are empty, so these
two files can be deleted to fix the warning.

Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.177

    This version brings along following fixes:
    - Added I2C escape to support query exist
    - Functionality to get pipe from stream context
    - debugfs entry fixes
    - Block zstate when more than one plane enabled
    - Update to engine ddc
    - Reading lante status during LT fixes
    - Null point filters
    - [FW Promotion] Release 0.0.108.0

Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.108.0

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2

[why]
DCN31 has this in zstate save/restore sequence.
need for non_zstate supported ASIC

[how]
add this PANEL_PWRSEQ_REF_DIV2 to existing panel_cntl_hw_init structure.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Wait for hubp read line for Pollock

[Why]
Underflow occurred while hubp ret pipe read is idle and the
second pipe is powered up and added. Flickering and underflow
are only observed on Pollock.

[How]
Check the hubp ret pipe read prior to unlock pipes.

Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Becle Lee <becle.lee@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add null pointer filter

[Why & How]
Add null pointer filter for logical integrity.

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Jing Zhou <Jing.Zhou@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Retry when fail reading lane status during LT

[Why]
In dp_get_lane_status_and_lane_adjust(), we call core_link_read_dpcd()
to get lane status but we ignore the return value of the function. If
there is problem with AUX and we eventually can only get partial data
from monitor, we might misuse the data to jude the link training result.
Which could have us trapped in the dc_link_dp_perform_link_training()
since we thought that we can still give a try on another link setting.

[How]
In dp_get_lane_status_and_lane_adjust(), take return value of
core_link_read_dpcd() into account. If we fail to read all requested
data, we treat lanes status as previous one and repeat LT steps again.

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add new enum for EDID status

[Why]
We must support a new type of partial edid return in the future

[How]
Add interface and case hander for partial edid

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Dale Zhao <dale.zhao@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Block zstate when more than one plane enabled

[Why]
Currently Z10 save/restore only covers 1 plane case. If we enter
Z10 with 2 planes enabled, 1 of the 2 planes will not be restored.
causing black screen.

[How]
Disable Zstate when more than 1 plane is enabled. Right now Z9 enable
but Z10 disable is not a supported config, so we disable both.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update engine ddc

[Why]
Crash caused by a ddc update failure

[How]
Update engine ddc before release engine.

Reviewed-by: Wyatt Wood <Wyatt.Wood@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Jing Zhou <Jing.Zhou@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix a few parts in debugfs entry

[Why & How]
1. To leverage and simplify the igt tool. Change the value of
retrain when calling preferred training settings.
Now, writing value to link settings triggers link training immediately.

2. Add dc lock when triggering link training in edp_ilr_write()

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add function to get the pipe from the stream context

[Why]
We need a helper function in dc to grab the pipe from the stream
context.

[How]
Add it.

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add I2C escape to support query device exist.

[How]
1. Search OEM I2C info from BIOS and compare with input parameter.
2. If BIOS doesn't record it, just try to read one byte.

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Move reset domain init before calling RREG32

amdgpu_detect_virtualization reads register, amdgpu_device_rreg access
adev->reset_domain->sem if kernel defined CONFIG_LOCKDEP, below is the
random boot hang backtrace on Vega10. It may get random NULL pointer
access backtrace if amdgpu_sriov_runtime is true too.

Move amdgpu_reset_create_reset_domain before calling to RREG32.

 BUG: kernel NULL pointer dereference, address:
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] PREEMPT SMP NOPTI
 Workqueue: events work_for_cpu_fn
 RIP: 0010:down_read_trylock+0x13/0xf0
 Call Trace:
  <TASK>
  amdgpu_device_skip_hw_access+0x38/0x80 [amdgpu]
  amdgpu_device_rreg+0x1b/0x170 [amdgpu]
  amdgpu_detect_virtualization+0x73/0x100 [amdgpu]
  amdgpu_device_init.cold.60+0xbe/0x16b1 [amdgpu]
  ? pci_bus_read_config_word+0x43/0x70
  amdgpu_driver_load_kms+0x15/0x120 [amdgpu]
  amdgpu_pci_probe+0x1a1/0x3a0 [amdgpu]

Fixes: d0fb18b535679a ("drm/amdgpu: Move reset sem into reset_domain")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: fix gfx hang on renoir in IGT reload test

[why]
CP hangs in igt reloading test on renoir, more precisely, hangs on the
second time insmod.

[how]
mode2 reset can make it recover, and mode2 reset only effects gfx core,
dcn and the screen will not be impacted.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: only check for _PR3 on dGPUs

We don't support runtime pm on APUs.  They support more
dynamic power savings using clock and powergating.

Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>