review.tizen.org Git - platform/kernel/linux-starfive.git/log

btrfs: fix use-after-free of new block group that became unused

If a task creates a new block group and that block group becomes unused
before we finish its creation, at btrfs_create_pending_block_groups(),
then when btrfs_mark_bg_unused() is called against the block group, we
assume that the block group is currently in the list of block groups to
reclaim, and we move it out of the list of new block groups and into the
list of unused block groups. This has two consequences:

1) We move it out of the list of new block groups associated to the
   current transaction. So the block group creation is not finished and
   if we attempt to delete the bg because it's unused, we will not find
   the block group item in the extent tree (or the new block group tree),
   its device extent items in the device tree etc, resulting in the
   deletion to fail due to the missing items;

2) We don't increment the reference count on the block group when we
   move it to the list of unused block groups, because we assumed the
   block group was on the list of block groups to reclaim, and in that
   case it already has the correct reference count. However the block
   group was on the list of new block groups, in which case no extra
   reference was taken because it's local to the current task. This
   later results in doing an extra reference count decrement when
   removing the block group from the unused list, eventually leading the
   reference count to 0.

This second case was caught when running generic/297 from fstests, which
produced the following assertion failure and stack trace:

  [589.559] assertion failed: refcount_read(&block_group->refs) == 1, in fs/btrfs/block-group.c:4299
  [589.559] ------------[ cut here ]------------
  [589.559] kernel BUG at fs/btrfs/block-group.c:4299!
  [589.560] invalid opcode: 0000 [#1] PREEMPT SMP PTI
  [589.560] CPU: 8 PID: 2819134 Comm: umount Tainted: G        W          6.4.0-rc6-btrfs-next-134+ #1
  [589.560] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
  [589.560] RIP: 0010:btrfs_free_block_groups+0x449/0x4a0 [btrfs]
  [589.561] Code: 68 62 da c0 (...)
  [589.561] RSP: 0018:ffffa55a8c3b3d98 EFLAGS: 00010246
  [589.561] RAX: 0000000000000058 RBX: ffff8f030d7f2000 RCX: 0000000000000000
  [589.562] RDX: 0000000000000000 RSI: ffffffff953f0878 RDI: 00000000ffffffff
  [589.562] RBP: ffff8f030d7f2088 R08: 0000000000000000 R09: ffffa55a8c3b3c50
  [589.562] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8f05850b4c00
  [589.562] R13: ffff8f030d7f2090 R14: ffff8f05850b4cd8 R15: dead000000000100
  [589.563] FS:  00007f497fd2e840(0000) GS:ffff8f09dfc00000(0000) knlGS:0000000000000000
  [589.563] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [589.563] CR2: 00007f497ff8ec10 CR3: 0000000271472006 CR4: 0000000000370ee0
  [589.563] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [589.564] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [589.564] Call Trace:
  [589.564]  <TASK>
  [589.565]  ? __die_body+0x1b/0x60
  [589.565]  ? die+0x39/0x60
  [589.565]  ? do_trap+0xeb/0x110
  [589.565]  ? btrfs_free_block_groups+0x449/0x4a0 [btrfs]
  [589.566]  ? do_error_trap+0x6a/0x90
  [589.566]  ? btrfs_free_block_groups+0x449/0x4a0 [btrfs]
  [589.566]  ? exc_invalid_op+0x4e/0x70
  [589.566]  ? btrfs_free_block_groups+0x449/0x4a0 [btrfs]
  [589.567]  ? asm_exc_invalid_op+0x16/0x20
  [589.567]  ? btrfs_free_block_groups+0x449/0x4a0 [btrfs]
  [589.567]  ? btrfs_free_block_groups+0x449/0x4a0 [btrfs]
  [589.567]  close_ctree+0x35d/0x560 [btrfs]
  [589.568]  ? fsnotify_sb_delete+0x13e/0x1d0
  [589.568]  ? dispose_list+0x3a/0x50
  [589.568]  ? evict_inodes+0x151/0x1a0
  [589.568]  generic_shutdown_super+0x73/0x1a0
  [589.569]  kill_anon_super+0x14/0x30
  [589.569]  btrfs_kill_super+0x12/0x20 [btrfs]
  [589.569]  deactivate_locked_super+0x2e/0x70
  [589.569]  cleanup_mnt+0x104/0x160
  [589.570]  task_work_run+0x56/0x90
  [589.570]  exit_to_user_mode_prepare+0x160/0x170
  [589.570]  syscall_exit_to_user_mode+0x22/0x50
  [589.570]  ? __x64_sys_umount+0x12/0x20
  [589.571]  do_syscall_64+0x48/0x90
  [589.571]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
  [589.571] RIP: 0033:0x7f497ff0a567
  [589.571] Code: af 98 0e (...)
  [589.572] RSP: 002b:00007ffc98347358 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
  [589.572] RAX: 0000000000000000 RBX: 00007f49800b8264 RCX: 00007f497ff0a567
  [589.572] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000557f558abfa0
  [589.573] RBP: 0000557f558a6ba0 R08: 0000000000000000 R09: 00007ffc98346100
  [589.573] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
  [589.573] R13: 0000557f558abfa0 R14: 0000557f558a6cb0 R15: 0000557f558a6dd0
  [589.573]  </TASK>
  [589.574] Modules linked in: dm_snapshot dm_thin_pool (...)
  [589.576] ---[ end trace 0000000000000000 ]---

Fix this by adding a runtime flag to the block group to tell that the
block group is still in the list of new block groups, and therefore it
should not be moved to the list of unused block groups, at
btrfs_mark_bg_unused(), until the flag is cleared, when we finish the
creation of the block group at btrfs_create_pending_block_groups().

Fixes: a9f189716cf1 ("btrfs: move out now unused BG from the reclaim list")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: be a bit more careful when setting mirror_num_ret in btrfs_map_block

The mirror_num_ret is allowed to be NULL, although it has to be set when
smap is set. Unfortunately that is not a well enough specifiable
invariant for static type checkers, so add a NULL check to make sure they
are fine.

Fixes: 03793cbbc80f ("btrfs: add fast path for single device io in __btrfs_map_block")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: fix race between balance and cancel/pause

Syzbot reported a panic that looks like this:

  assertion failed: fs_info->exclusive_operation == BTRFS_EXCLOP_BALANCE_PAUSED, in fs/btrfs/ioctl.c:465
  ------------[ cut here ]------------
  kernel BUG at fs/btrfs/messages.c:259!
  RIP: 0010:btrfs_assertfail+0x2c/0x30 fs/btrfs/messages.c:259
  Call Trace:
   <TASK>
   btrfs_exclop_balance fs/btrfs/ioctl.c:465 [inline]
   btrfs_ioctl_balance fs/btrfs/ioctl.c:3564 [inline]
   btrfs_ioctl+0x531e/0x5b30 fs/btrfs/ioctl.c:4632
   vfs_ioctl fs/ioctl.c:51 [inline]
   __do_sys_ioctl fs/ioctl.c:870 [inline]
   __se_sys_ioctl fs/ioctl.c:856 [inline]
   __x64_sys_ioctl+0x197/0x210 fs/ioctl.c:856
   do_syscall_x64 arch/x86/entry/common.c:50 [inline]
   do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x63/0xcd

The reproducer is running a balance and a cancel or pause in parallel.
The way balance finishes is a bit wonky, if we were paused we need to
save the balance_ctl in the fs_info, but clear it otherwise and cleanup.
However we rely on the return values being specific errors, or having a
cancel request or no pause request.  If balance completes and returns 0,
but we have a pause or cancel request we won't do the appropriate
cleanup, and then the next time we try to start a balance we'll trip
this ASSERT.

The error handling is just wrong here, we always want to clean up,
unless we got -ECANCELLED and we set the appropriate pause flag in the
exclusive op.  With this patch the reproducer ran for an hour without
tripping, previously it would trip in less than a few minutes.

Reported-by: syzbot+c0f3acf145cb465426d5@syzkaller.appspotmail.com
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: fix race between quota disable and relocation

If we disable quotas while we have a relocation of a metadata block group
that has extents belonging to the quota root, we can cause the relocation
to fail with -ENOENT. This is because relocation builds backref nodes for
extents of the quota root and later needs to walk the backrefs and access
the quota root - however if in between a task disables quotas, it results
in deleting the quota root from the root tree (with btrfs_del_root(),
called from btrfs_quota_disable().

This can be sporadically triggered by test case btrfs/255 from fstests:

  $ ./check btrfs/255
  FSTYP         -- btrfs
  PLATFORM      -- Linux/x86_64 debian0 6.4.0-rc6-btrfs-next-134+ #1 SMP PREEMPT_DYNAMIC Thu Jun 15 11:59:28 WEST 2023
  MKFS_OPTIONS  -- /dev/sdc
  MOUNT_OPTIONS -- /dev/sdc /home/fdmanana/btrfs-tests/scratch_1

  btrfs/255 6s ... _check_dmesg: something found in dmesg (see /home/fdmanana/git/hub/xfstests/results//btrfs/255.dmesg)
  - output mismatch (see /home/fdmanana/git/hub/xfstests/results//btrfs/255.out.bad)
      --- tests/btrfs/255.out 2023-03-02 21:47:53.876609426 +0000
      +++ /home/fdmanana/git/hub/xfstests/results//btrfs/255.out.bad 2023-06-16 10:20:39.267563212 +0100
      @@ -1,2 +1,4 @@
       QA output created by 255
      +ERROR: error during balancing '/home/fdmanana/btrfs-tests/scratch_1': No such file or directory
      +There may be more info in syslog - try dmesg | tail
       Silence is golden
      ...
      (Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/btrfs/255.out /home/fdmanana/git/hub/xfstests/results//btrfs/255.out.bad'  to see the entire diff)
  Ran: btrfs/255
  Failures: btrfs/255
  Failed 1 of 1 tests

To fix this make the quota disable operation take the cleaner mutex, as
relocation of a block group also takes this mutex. This is also what we
do when deleting a subvolume/snapshot, we take the cleaner mutex in the
cleaner kthread (at cleaner_kthread()) and then we call btrfs_del_root()
at btrfs_drop_snapshot() while under the protection of the cleaner mutex.

Fixes: bed92eae26cc ("Btrfs: qgroup implementation and prototypes")
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: add comment to struct btrfs_fs_info::dirty_cowonly_roots

Add a comment to struct btrfs_fs_info::dirty_cowonly_roots to mention
that struct btrfs_fs_info::trans_lock is the lock that protects that
list.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: fix race when deleting free space root from the dirty cow roots list

When deleting the free space tree we are deleting the free space root
from the list fs_info->dirty_cowonly_roots without taking the lock that
protects it, which is struct btrfs_fs_info::trans_lock.
This unsynchronized list manipulation may cause chaos if there's another
concurrent manipulation of this list, such as when adding a root to it
with ctree.c:add_root_to_dirty_list().

This can result in all sorts of weird failures caused by a race, such as
the following crash:

  [337571.278245] general protection fault, probably for non-canonical address 0xdead000000000108: 0000 [#1] PREEMPT SMP PTI
  [337571.278933] CPU: 1 PID: 115447 Comm: btrfs Tainted: G        W          6.4.0-rc6-btrfs-next-134+ #1
  [337571.279153] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
  [337571.279572] RIP: 0010:commit_cowonly_roots+0x11f/0x250 [btrfs]
  [337571.279928] Code: 85 38 06 00 (...)
  [337571.280363] RSP: 0018:ffff9f63446efba0 EFLAGS: 00010206
  [337571.280582] RAX: ffff942d98ec2638 RBX: ffff9430b82b4c30 RCX: 0000000449e1c000
  [337571.280798] RDX: dead000000000100 RSI: ffff9430021e4900 RDI: 0000000000036070
  [337571.281015] RBP: ffff942d98ec2000 R08: ffff942d98ec2000 R09: 000000000000015b
  [337571.281254] R10: 0000000000000009 R11: 0000000000000001 R12: ffff942fe8fbf600
  [337571.281476] R13: ffff942dabe23040 R14: ffff942dabe20800 R15: ffff942d92cf3b48
  [337571.281723] FS:  00007f478adb7340(0000) GS:ffff94349fa40000(0000) knlGS:0000000000000000
  [337571.281950] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [337571.282184] CR2: 00007f478ab9a3d5 CR3: 000000001e02c001 CR4: 0000000000370ee0
  [337571.282416] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [337571.282647] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [337571.282874] Call Trace:
  [337571.283101]  <TASK>
  [337571.283327]  ? __die_body+0x1b/0x60
  [337571.283570]  ? die_addr+0x39/0x60
  [337571.283796]  ? exc_general_protection+0x22e/0x430
  [337571.284022]  ? asm_exc_general_protection+0x22/0x30
  [337571.284251]  ? commit_cowonly_roots+0x11f/0x250 [btrfs]
  [337571.284531]  btrfs_commit_transaction+0x42e/0xf90 [btrfs]
  [337571.284803]  ? _raw_spin_unlock+0x15/0x30
  [337571.285031]  ? release_extent_buffer+0x103/0x130 [btrfs]
  [337571.285305]  reset_balance_state+0x152/0x1b0 [btrfs]
  [337571.285578]  btrfs_balance+0xa50/0x11e0 [btrfs]
  [337571.285864]  ? __kmem_cache_alloc_node+0x14a/0x410
  [337571.286086]  btrfs_ioctl+0x249a/0x3320 [btrfs]
  [337571.286358]  ? mod_objcg_state+0xd2/0x360
  [337571.286577]  ? refill_obj_stock+0xb0/0x160
  [337571.286798]  ? seq_release+0x25/0x30
  [337571.287016]  ? __rseq_handle_notify_resume+0x3ba/0x4b0
  [337571.287235]  ? percpu_counter_add_batch+0x2e/0xa0
  [337571.287455]  ? __x64_sys_ioctl+0x88/0xc0
  [337571.287675]  __x64_sys_ioctl+0x88/0xc0
  [337571.287901]  do_syscall_64+0x38/0x90
  [337571.288126]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
  [337571.288352] RIP: 0033:0x7f478aaffe9b

So fix this by locking struct btrfs_fs_info::trans_lock before deleting
the free space root from that list.

Fixes: a5ed91828518 ("Btrfs: implement the free space B-tree")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: fix race when deleting quota root from the dirty cow roots list

When disabling quotas we are deleting the quota root from the list
fs_info->dirty_cowonly_roots without taking the lock that protects it,
which is struct btrfs_fs_info::trans_lock. This unsynchronized list
manipulation may cause chaos if there's another concurrent manipulation
of this list, such as when adding a root to it with
ctree.c:add_root_to_dirty_list().

This can result in all sorts of weird failures caused by a race, such as
the following crash:

  [337571.278245] general protection fault, probably for non-canonical address 0xdead000000000108: 0000 [#1] PREEMPT SMP PTI
  [337571.278933] CPU: 1 PID: 115447 Comm: btrfs Tainted: G        W          6.4.0-rc6-btrfs-next-134+ #1
  [337571.279153] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
  [337571.279572] RIP: 0010:commit_cowonly_roots+0x11f/0x250 [btrfs]
  [337571.279928] Code: 85 38 06 00 (...)
  [337571.280363] RSP: 0018:ffff9f63446efba0 EFLAGS: 00010206
  [337571.280582] RAX: ffff942d98ec2638 RBX: ffff9430b82b4c30 RCX: 0000000449e1c000
  [337571.280798] RDX: dead000000000100 RSI: ffff9430021e4900 RDI: 0000000000036070
  [337571.281015] RBP: ffff942d98ec2000 R08: ffff942d98ec2000 R09: 000000000000015b
  [337571.281254] R10: 0000000000000009 R11: 0000000000000001 R12: ffff942fe8fbf600
  [337571.281476] R13: ffff942dabe23040 R14: ffff942dabe20800 R15: ffff942d92cf3b48
  [337571.281723] FS:  00007f478adb7340(0000) GS:ffff94349fa40000(0000) knlGS:0000000000000000
  [337571.281950] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [337571.282184] CR2: 00007f478ab9a3d5 CR3: 000000001e02c001 CR4: 0000000000370ee0
  [337571.282416] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [337571.282647] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [337571.282874] Call Trace:
  [337571.283101]  <TASK>
  [337571.283327]  ? __die_body+0x1b/0x60
  [337571.283570]  ? die_addr+0x39/0x60
  [337571.283796]  ? exc_general_protection+0x22e/0x430
  [337571.284022]  ? asm_exc_general_protection+0x22/0x30
  [337571.284251]  ? commit_cowonly_roots+0x11f/0x250 [btrfs]
  [337571.284531]  btrfs_commit_transaction+0x42e/0xf90 [btrfs]
  [337571.284803]  ? _raw_spin_unlock+0x15/0x30
  [337571.285031]  ? release_extent_buffer+0x103/0x130 [btrfs]
  [337571.285305]  reset_balance_state+0x152/0x1b0 [btrfs]
  [337571.285578]  btrfs_balance+0xa50/0x11e0 [btrfs]
  [337571.285864]  ? __kmem_cache_alloc_node+0x14a/0x410
  [337571.286086]  btrfs_ioctl+0x249a/0x3320 [btrfs]
  [337571.286358]  ? mod_objcg_state+0xd2/0x360
  [337571.286577]  ? refill_obj_stock+0xb0/0x160
  [337571.286798]  ? seq_release+0x25/0x30
  [337571.287016]  ? __rseq_handle_notify_resume+0x3ba/0x4b0
  [337571.287235]  ? percpu_counter_add_batch+0x2e/0xa0
  [337571.287455]  ? __x64_sys_ioctl+0x88/0xc0
  [337571.287675]  __x64_sys_ioctl+0x88/0xc0
  [337571.287901]  do_syscall_64+0x38/0x90
  [337571.288126]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
  [337571.288352] RIP: 0033:0x7f478aaffe9b

So fix this by locking struct btrfs_fs_info::trans_lock before deleting
the quota root from that list.

Fixes: bed92eae26cc ("Btrfs: qgroup implementation and prototypes")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: tracepoints: also show actual number of the outstanding extents

The btrfs_inode_mod_outstanding_extents trace event only shows the modified
number to the number of outstanding extents. It would be helpful if we can
see the resulting extent number as well.

Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: update i_version in update_dev_time

When updating the ctime, we also want to update i_version.

This is just something I noticed by inspection. There is probably no way
to test this today unless you can somehow get to this inode via nfsd.
Still, I think it's the right thing to do for consistency's sake.

David Sterba's comment: I don't see anything wrong with setting the
iversion bit, however I also don't see where this would be useful.
Agreed with the consistency, otherwise the time is updated when device
super block is wiped or a device initialized, both are big events so
missing that due to lack of iversion update seems unlikely. I'll add it
to the queue, thanks.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
[ add comments ]
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: make btrfs_compressed_bioset static

The 'btrfs_compressed_bioset' struct isn't exported outside of the
fs/btrfs/compression.c file, so make it static to fix the following
sparse warning:

fs/btrfs/compression.c:40:16: warning: symbol 'btrfs_compressed_bioset' was not declared. Should it be static?

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: add handling for RAID1C23/DUP to btrfs_reduce_alloc_profile

Callers of `btrfs_reduce_alloc_profile` expect it to return exactly
one allocation profile flag, and failing to do so may ultimately
result in a WARN_ON and remount-ro when allocating new blocks, like
the below transaction abort on 6.1.

`btrfs_reduce_alloc_profile` has two ways of determining the profile,
first it checks if a conversion balance is currently running and
uses the profile we're converting to. If no balance is currently
running, it returns the max-redundancy profile which at least one
block in the selected block group has.

This works by simply checking each known allocation profile bit in
redundancy order. However, `btrfs_reduce_alloc_profile` has not been
updated as new flags have been added - first with the `DUP` profile
and later with the RAID1C34 profiles.

Because of the way it checks, if we have blocks with different
profiles and at least one is known, that profile will be selected.
However, if none are known we may return a flag set with multiple
allocation profiles set.

This is currently only possible when a balance from one of the three
unhandled profiles to another of the unhandled profiles is canceled
after allocating at least one block using the new profile.

In that case, a transaction abort like the below will occur and the
filesystem will need to be mounted with -o skip_balance to get it
mounted rw again (but the balance cannot be resumed without a
similar abort).

  [770.648] ------------[ cut here ]------------
  [770.648] BTRFS: Transaction aborted (error -22)
  [770.648] WARNING: CPU: 43 PID: 1159593 at fs/btrfs/extent-tree.c:4122 find_free_extent+0x1d94/0x1e00 [btrfs]
  [770.648] CPU: 43 PID: 1159593 Comm: btrfs Tainted: G        W 6.1.0-0.deb11.7-powerpc64le #1  Debian 6.1.20-2~bpo11+1a~test
  [770.648] Hardware name: T2P9D01 REV 1.00 POWER9 0x4e1202 opal:skiboot-bc106a0 PowerNV
  [770.648] NIP:  c00800000f6784fc LR: c00800000f6784f8 CTR: c000000000d746c0
  [770.648] REGS: c000200089afe9a0 TRAP: 0700   Tainted: G        W (6.1.0-0.deb11.7-powerpc64le Debian 6.1.20-2~bpo11+1a~test)
  [770.648] MSR:  9000000002029033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE>  CR: 28848282  XER: 20040000
  [770.648] CFAR: c000000000135110 IRQMASK: 0
    GPR00: c00800000f6784f8 c000200089afec40 c00800000f7ea800 0000000000000026
    GPR04: 00000001004820c2 c000200089afea00 c000200089afe9f8 0000000000000027
    GPR08: c000200ffbfe7f98 c000000002127f90 ffffffffffffffd8 0000000026d6a6e8
    GPR12: 0000000028848282 c000200fff7f3800 5deadbeef0000122 c00000002269d000
    GPR16: c0002008c7797c40 c000200089afef17 0000000000000000 0000000000000000
    GPR20: 0000000000000000 0000000000000001 c000200008bc5a98 0000000000000001
    GPR24: 0000000000000000 c0000003c73088d0 c000200089afef17 c000000016d3a800
    GPR28: c0000003c7308800 c00000002269d000 ffffffffffffffea 0000000000000001
  [770.648] NIP [c00800000f6784fc] find_free_extent+0x1d94/0x1e00 [btrfs]
  [770.648] LR [c00800000f6784f8] find_free_extent+0x1d90/0x1e00 [btrfs]
  [770.648] Call Trace:
  [770.648] [c000200089afec40] [c00800000f6784f8] find_free_extent+0x1d90/0x1e00 [btrfs] (unreliable)
  [770.648] [c000200089afed30] [c00800000f681398] btrfs_reserve_extent+0x1a0/0x2f0 [btrfs]
  [770.648] [c000200089afeea0] [c00800000f681bf0] btrfs_alloc_tree_block+0x108/0x670 [btrfs]
  [770.648] [c000200089afeff0] [c00800000f66bd68] __btrfs_cow_block+0x170/0x850 [btrfs]
  [770.648] [c000200089aff100] [c00800000f66c58c] btrfs_cow_block+0x144/0x288 [btrfs]
  [770.648] [c000200089aff1b0] [c00800000f67113c] btrfs_search_slot+0x6b4/0xcb0 [btrfs]
  [770.648] [c000200089aff2a0] [c00800000f679f60] lookup_inline_extent_backref+0x128/0x7c0 [btrfs]
  [770.648] [c000200089aff3b0] [c00800000f67b338] lookup_extent_backref+0x70/0x190 [btrfs]
  [770.648] [c000200089aff470] [c00800000f67b54c] __btrfs_free_extent+0xf4/0x1490 [btrfs]
  [770.648] [c000200089aff5a0] [c00800000f67d770] __btrfs_run_delayed_refs+0x328/0x1530 [btrfs]
  [770.648] [c000200089aff740] [c00800000f67ea2c] btrfs_run_delayed_refs+0xb4/0x3e0 [btrfs]
  [770.648] [c000200089aff800] [c00800000f699aa4] btrfs_commit_transaction+0x8c/0x12b0 [btrfs]
  [770.648] [c000200089aff8f0] [c00800000f6dc628] reset_balance_state+0x1c0/0x290 [btrfs]
  [770.648] [c000200089aff9a0] [c00800000f6e2f7c] btrfs_balance+0x1164/0x1500 [btrfs]
  [770.648] [c000200089affb40] [c00800000f6f8e4c] btrfs_ioctl+0x2b54/0x3100 [btrfs]
  [770.648] [c000200089affc80] [c00000000053be14] sys_ioctl+0x794/0x1310
  [770.648] [c000200089affd70] [c00000000002af98] system_call_exception+0x138/0x250
  [770.648] [c000200089affe10] [c00000000000c654] system_call_common+0xf4/0x258
  [770.648] --- interrupt: c00 at 0x7fff94126800
  [770.648] NIP:  00007fff94126800 LR: 0000000107e0b594 CTR: 0000000000000000
  [770.648] REGS: c000200089affe80 TRAP: 0c00   Tainted: G        W (6.1.0-0.deb11.7-powerpc64le Debian 6.1.20-2~bpo11+1a~test)
  [770.648] MSR:  900000000000d033 <SF,HV,EE,PR,ME,IR,DR,RI,LE>  CR: 24002848  XER: 00000000
  [770.648] IRQMASK: 0
    GPR00: 0000000000000036 00007fffc9439da0 00007fff94217100 0000000000000003
    GPR04: 00000000c4009420 00007fffc9439ee8 0000000000000000 0000000000000000
    GPR08: 00000000803c7416 0000000000000000 0000000000000000 0000000000000000
    GPR12: 0000000000000000 00007fff9467d120 0000000107e64c9c 0000000107e64d0a
    GPR16: 0000000107e64d06 0000000107e64cf1 0000000107e64cc4 0000000107e64c73
    GPR20: 0000000107e64c31 0000000107e64bf1 0000000107e64be7 0000000000000000
    GPR24: 0000000000000000 00007fffc9439ee0 0000000000000003 0000000000000001
    GPR28: 00007fffc943f713 0000000000000000 00007fffc9439ee8 0000000000000000
  [770.648] NIP [00007fff94126800] 0x7fff94126800
  [770.648] LR [0000000107e0b594] 0x107e0b594
  [770.648] --- interrupt: c00
  [770.648] Instruction dump:
  [770.648] 3b00ffe4 e8898828 481175f5 60000000 4bfff4fc 3be00000 4bfff570 3d220000
  [770.648] 7fc4f378 e8698830 4811cd95 e8410018 <0fe00000> f9c10060 f9e10068 fa010070
  [770.648] ---[ end trace 0000000000000000 ]---
  [770.648] BTRFS: error (device dm-2: state A) in find_free_extent_update_loop:4122: errno=-22 unknown
  [770.648] BTRFS info (device dm-2: state EA): forced readonly
  [770.648] BTRFS: error (device dm-2: state EA) in __btrfs_free_extent:3070: errno=-22 unknown
  [770.648] BTRFS error (device dm-2: state EA): failed to run delayed ref for logical 17838685708288 num_bytes 24576 type 184 action 2 ref_mod 1: -22
  [770.648] BTRFS: error (device dm-2: state EA) in btrfs_run_delayed_refs:2144: errno=-22 unknown
  [770.648] BTRFS: error (device dm-2: state EA) in reset_balance_state:3599: errno=-22 unknown

Fixes: 47e6f7423b91 ("btrfs: add support for 3-copy replication (raid1c3)")
Fixes: 8d6fac0087e5 ("btrfs: add support for 4-copy replication (raid1c4)")
CC: stable@vger.kernel.org # 5.10+
Signed-off-by: Matt Corallo <blnxfsl@bluematt.me>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: scrub: remove btrfs_fs_info::scrub_wr_completion_workers

Since the scrub rework introduced by commit 2af2aaf98205 ("btrfs:
scrub: introduce structure for new BTRFS_STRIPE_LEN based interface")
and later commits, scrub only needs one single workqueue,
fs_info::scrub_worker.

That scrub_wr_completion_workers is initially to handle the delay work
after write bios finished. But the new scrub code goes submit-and-wait
for write bios, thus all the work are done inside the scrub_worker.

The last user of fs_info::scrub_wr_completion_workers is removed in
commit 16f93993498b ("btrfs: scrub: remove the old writeback
infrastructure"), so we can safely remove the workqueue.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: scrub: remove scrub_ctx::csum_list member

Since the rework of scrub introduced by commit 2af2aaf98205 ("btrfs:
scrub: introduce structure for new BTRFS_STRIPE_LEN based interface")
and later commits, scrub no longer keeps its data checksum inside sctx.

Instead we have scrub_stripe::csums for the checksum of the stripe.
Thus we can remove the unused scrub_ctx::csum_list member.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: do not BUG_ON after failure to migrate space during truncation

During truncation we reserve 2 metadata units when starting a transaction
(reserved space goes to fs_info->trans_block_rsv) and then attempt to
migrate 1 unit (min_size bytes) from fs_info->trans_block_rsv into the
local block reserve. If we ever fail we trigger a BUG_ON(), which should
never happen, because we reserved 2 units. However if we happen to fail
for some reason, we don't need to be so dire and hit a BUG_ON(), we can
just error out the truncation and, since this is highly unexpected,
surround the error check with WARN_ON(), to get an informative stack
trace and tag the branh as 'unlikely'. Also make the 'min_size' variable
const, since it's not supposed to ever change and any accidental change
could possibly make the space migration not so unlikely to fail.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: do not BUG_ON on failure to get dir index for new snapshot

During the transaction commit path, at create_pending_snapshot(), there
is no need to BUG_ON() in case we fail to get a dir index for the snapshot
in the parent directory. This should fail very rarely because the parent
inode should be loaded in memory already, with the respective delayed
inode created and the parent inode's index_cnt field already initialized.

However if it fails, it may be -ENOMEM like the comment at
create_pending_snapshot() says or any error returned by
btrfs_search_slot() through btrfs_set_inode_index_count(), which can be
pretty much anything such as -EIO or -EUCLEAN for example. So the comment
is not correct when it says it can only be -ENOMEM.

However doing a BUG_ON() here is overkill, since we can instead abort
the transaction and return the error. Note that any error returned by
create_pending_snapshot() will eventually result in a transaction
abort at cleanup_transaction(), called from btrfs_commit_transaction(),
but we can explicitly abort the transaction at this point instead so that
we get a stack trace to tell us that the call to btrfs_set_inode_index()
failed.

So just abort the transaction and return in case btrfs_set_inode_index()
returned an error at create_pending_snapshot().

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: send: do not BUG_ON() on unexpected symlink data extent

There's really no need to BUG_ON() if we find a symlink with an extent
that is not inline or is compressed. We can just make send fail with
an error (-EUCLEAN) and log an informative error message, so just do
that instead of BUG_ON().

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: do not BUG_ON() when dropping inode items from log root

When dropping inode items from a log tree at drop_inode_items(), we this
BUG_ON() on the result of btrfs_search_slot() because we don't expect an
exact match since having a key with an offset of (u64)-1 is unexpected.
That is generally true, but for dir index keys for example, we can get a
key with such an offset value, even though it's very unlikely and it would
take ages to increase the sequence counter for a dir index up to (u64)-1.
We can deal with an exact match, we just have to delete the key at that
slot, so there is really no need to BUG_ON(), error out or trigger any
warning. So remove the BUG_ON().

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: replace BUG_ON() at split_item() with proper error handling

There's no need to BUG_ON() at split_item() if the leaf does not have
enough free space for the new item, we can just return -ENOSPC since
the caller can deal with errors from split_item(). Also, as this is a
very unlikely condition to happen, because the caller has invoked
setup_leaf_for_split() before calling split_item(), surround the
condition with a WARN_ON() which makes it easier to notice this
unexpected condition and tags the if branch with 'unlikely' as well.

I've actually once hit this BUG_ON() with some incorrect code changes
I had, which was very inconvenient as it required rebooting the VM.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: do not BUG_ON() on tree mod log failures at btrfs_del_ptr()

At btrfs_del_ptr(), instead of doing a BUG_ON() in case we fail to record
tree mod log operations, do a transaction abort and return the error to
the callers. There's really no need for the BUG_ON() as we can release all
resources in the context of all callers, and we have to abort because other
future tree searches that use the tree mod log (btrfs_search_old_slot())
may get inconsistent results if other operations modify the tree after
that failure and before the tree mod log based search.

This implies btrfs_del_ptr() return an int instead of void, and making all
callers check for returned errors.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: do not BUG_ON() on tree mod log failures at insert_ptr()

At insert_ptr(), instead of doing a BUG_ON() in case we fail to record
tree mod log operations, do a transaction abort and return the error to
the callers. There's really no need for the BUG_ON() as we can release all
resources in the context of all callers, and we have to abort because other
future tree searches that use the tree mod log (btrfs_search_old_slot())
may get inconsistent results if other operations modify the tree after
that failure and before the tree mod log based search.

This implies making insert_ptr() return an int instead of void, and making
all callers check for returned errors.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: do not BUG_ON() on tree mod log failure at insert_new_root()

At insert_new_root(), instead of doing a BUG_ON() in case we fail to
record the tree mod log operation, just return the error to the callers
after releasing the allocated tree block. At this point we haven't made
any changes to the b+tree, so we haven't left it in an inconsistent state
and therefore have no need to abort the transaction. All we need to do is
to unlock and free the extent buffer we just allocated with the purpose
of making it the new root.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: do not BUG_ON() on tree mod log failures at push_nodes_for_insert()

At push_nodes_for_insert(), instead of doing a BUG_ON() in case we fail to
record tree mod log operations, do a transaction abort and return the
error to the caller. There's really no need for the BUG_ON() as we can
release all resources in this context, and we have to abort because other
future tree searches that use the tree mod log (btrfs_search_old_slot())
may get inconsistent results if other operations modify the tree after
that failure and before the tree mod log based search.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: abort transaction at update_ref_for_cow() when ref count is zero

At update_ref_for_cow() we are calling btrfs_handle_fs_error() if we find
that the extent buffer has an unexpected ref count of zero, however we can
simply use btrfs_abort_transaction(), which achieves the same purposes: to
turn the fs to error state, abort the current transaction and turn the fs
to RO mode as well. Besides that, btrfs_abort_transaction() also prints a
stack trace which makes it more useful.

Also, as this is a very unexpected situation, indicating a serious
corruption/inconsistency, tag the if branch as 'unlikely', set the error
code to -EUCLEAN instead of -EROFS, and log an explicit message.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: abort transaction at balance_level() when left child is missing

At balance_level() we are calling btrfs_handle_fs_error() when the middle
child only has 1 item and the left child is missing, however we can simply
use btrfs_abort_transaction(), which achieves the same purposes: to turn
the fs to error state, abort the current transaction and turn the fs to
RO mode. Besides that, btrfs_abort_transaction() also prints a stack trace
which makes it more useful.

Also, as this is a highly unexpected case and it's about a b+tree
inconsistency, change the error code from -EROFS to -EUCLEAN, tag the if
branch as 'unlikely' and log an explicit error message.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: avoid unnecessarily setting the fs to RO and error state at balance_level()

At balance_level(), when trying to promote a child node to a root node, if
we fail to read the child we call btrfs_handle_fs_error(), which turns the
fs to RO mode and sets it to error state as well, causing any ongoing
transaction to abort. This however is not necessary because at that point
we have not made any change yet at balance_level(), so any error reading
the child node does not leaves us in any inconsistent state. Therefore we
can just return the error to the caller.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: rename enospc label to out at balance_level()

At balance_level() we have this 'enospc' label where we jump to in case
we get an error at several places. However that error is certainly not
-ENOSPC in call cases, it can be -EIO or -ENOMEM when reading a child
extent buffer for example, or -ENOMEM when trying to record tree mod log
operations. So to make this less confusing, rename the label to 'out'.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: do not BUG_ON() on tree mod log failure at balance_level()

At balance_level(), instead of doing a BUG_ON() in case we fail to record
tree mod log operations, do a transaction abort and return the error to
the callers. There's really no need for the BUG_ON() as we can release
all resources in this context, and we have to abort because other future
tree searches that use the tree mod log (btrfs_search_old_slot()) may get
inconsistent results if other operations modify the tree after that
failure and before the tree mod log based search.

CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: do not BUG_ON() on tree mod log failure at __btrfs_cow_block()

At __btrfs_cow_block(), instead of doing a BUG_ON() in case we fail to
record a tree mod log root insertion operation, do a transaction abort
instead. There's really no need for the BUG_ON(), we can properly
release all resources in this context and turn the filesystem to RO mode
and in an error state instead.

CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: avoid tree mod log ENOMEM failures when we don't need to log

When logging tree mod log operations we start by checking, in a lockless
manner, if we need to log - if we don't, we just return and do nothing,
otherwise we will allocate one or more tree mod log operations and then
check again if we need to log. This second check will take the tree mod
log lock in write mode if we need to log, otherwise it will do nothing
and we just free the allocated memory and return success.

We can improve on this by not returning an error in case the memory
allocations fail, unless the second check tells us that we actually need
to log. That is, if we fail to allocate memory and the second check tells
use that we don't need to log, we can just return success and avoid
returning -ENOMEM to the caller. Currently tree mod log failures are
dealt with either a BUG_ON() or a transaction abort, as tree mod log
operations are logged in code paths that modify a b+tree.

So just avoid failing with -ENOMEM if we fail to allocate a tree mod log
operation unless we actually need to log the operations, that is, if
tree_mod_dont_log() returns true.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: fix extent buffer leak after tree mod log failure at split_node()

At split_node(), if we fail to log the tree mod log copy operation, we
return without unlocking the split extent buffer we just allocated and
without decrementing the reference we own on it. Fix this by unlocking
it and decrementing the ref count before returning.

Fixes: 5de865eebb83 ("Btrfs: fix tree mod logging")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: add missing error handling when logging operation while COWing extent buffer

When COWing an extent buffer that is not the root node, we need to log in
the tree mod log that we replaced a pointer in the parent node, otherwise
a tree mod log user doing a search on the b+tree can return incorrect
results (that miss something). We are doing the call to
btrfs_tree_mod_log_insert_key() but we totally ignore its return value.

So fix this by adding the missing error handling, resulting in a
transaction abort and freeing the COWed extent buffer.

Fixes: f230475e62f7 ("Btrfs: put all block modifications into the tree mod log")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: set FMODE_CAN_ODIRECT instead of a dummy direct_IO method

Since commit a2ad63daa88b ("VFS: add FMODE_CAN_ODIRECT file flag") file
systems can just set the FMODE_CAN_ODIRECT flag at open time instead of
wiring up a dummy direct_IO method to indicate support for direct I/O.
Do that for btrfs so that noop_direct_IO can eventually be removed.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: update documentation for a block group's bg_list member

Currently we are only documenting two uses of the bg_list member of a
block group, but there two more:

1) To track deleted block groups for discard purposes, introduced in
   commit e33e17ee1098 ("btrfs: add missing discards when unpinning
   extents with -o discard");

2) To track block groups for automatic reclaim, introduced more recently
   by commit 18bb8bbf13c1 ("btrfs: zoned: automatically reclaim zones")

So document those two other use cases.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: reinsert BGs failed to reclaim

The reclaim process can temporarily fail. For example, if the space is
getting tight, it fails to make the block group read-only. If there are no
further writes on that block group, the block group will never get back to
the reclaim list, and the BG never gets reclaimed. In a certain workload,
we can leave many such block groups never reclaimed.

So, let's get it back to the list and give it a chance to be reclaimed.

Fixes: 18bb8bbf13c1 ("btrfs: zoned: automatically reclaim zones")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: bail out reclaim process if filesystem is read-only

When a filesystem is read-only, we cannot reclaim a block group as it
cannot rewrite the data. Just bail out in that case.

Note that it can drop block groups in this case. As we did
sb_start_write(), read-only filesystem means we got a fatal error and
forced read-only. There is no chance to reclaim them again.

Fixes: 18bb8bbf13c1 ("btrfs: zoned: automatically reclaim zones")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: move out now unused BG from the reclaim list

An unused block group is easy to remove to free up space and should be
reclaimed fast. Such block group can often already be a target of the
reclaim process. As we check list_empty(&bg->bg_list), we keep it in the
reclaim list. That block group is never reclaimed until the file system
is filled e.g. up to 75%.

Instead, we can move unused block group to the unused list and delete it
fast.

Fixes: 18bb8bbf13c1 ("btrfs: zoned: automatically reclaim zones")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: delete unused BGs while reclaiming BGs

The reclaiming process only starts after the filesystem volumes are
allocated to a certain level (75% by default). Thus, the list of
reclaiming target block groups can build up so huge at the time the
reclaim process kicks in. On a test run, there were over 1000 BGs in the
reclaim list.

As the reclaim involves rewriting the data, it takes really long time to
reclaim the BGs. While the reclaim is running, btrfs_delete_unused_bgs()
won't proceed because the reclaim side is holding
fs_info->reclaim_bgs_lock. As a result, we will have a large number of
unused BGs kept in the unused list. On my test run, I got 1057 unused BGs.

Since deleting a block group is relatively easy and fast work, we can call
btrfs_delete_unused_bgs() while it reclaims BGs, to avoid building up
unused BGs.

Fixes: 18bb8bbf13c1 ("btrfs: zoned: automatically reclaim zones")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: use btrfs_finish_ordered_extent to complete buffered writes

Use the btrfs_finish_ordered_extent helper to complete compressed writes
using the bbio->ordered pointer instead of requiring an rbtree lookup
in the otherwise equivalent btrfs_mark_ordered_io_finished called from
btrfs_writepage_endio_finish_ordered.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: use btrfs_finish_ordered_extent to complete direct writes

Use the btrfs_finish_ordered_extent helper to complete compressed writes
using the bbio->ordered pointer instead of requiring an rbtree lookup
in the otherwise equivalent btrfs_mark_ordered_io_finished called from
btrfs_writepage_endio_finish_ordered.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: use btrfs_finish_ordered_extent to complete compressed writes

Use the btrfs_finish_ordered_extent helper to complete compressed writes
using the bbio->ordered pointer instead of requiring an rbtree lookup
in the otherwise equivalent btrfs_mark_ordered_io_finished called from
btrfs_writepage_endio_finish_ordered.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: open code end_extent_writepage in end_bio_extent_writepage

This prepares for switching to more efficient ordered_extent processing
and already removes the forth and back conversion from len to end back to
len.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: add a btrfs_finish_ordered_extent helper

Add a helper to complete an ordered_extent without first doing a lookup.
The tracepoint cannot use the ordered_extent class as we also want to
print the range.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: factor out a btrfs_queue_ordered_fn helper

Factor out a helper to queue up an ordered_extent completion in a work
queue. This new helper will later be used complete an ordered_extent
without first doing a lookup.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: factor out a can_finish_ordered_extent helper

Factor out a helper from btrfs_mark_ordered_io_finished that does the
actual per-ordered_extent work to check if we want to schedule an I/O
completion. This new helper will later be used complete an
ordered_extent without first doing a lookup.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: use bbio->ordered in btrfs_csum_one_bio

Use the ordered_extent pointer in the btrfs_bio instead of looking it
up manually.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: add an ordered_extent pointer to struct btrfs_bio

Add a pointer to the ordered_extent to the existing union in struct
btrfs_bio, so all code dealing with data write bios can just use a
pointer dereference to retrieve the ordered_extent instead of doing
multiple rbtree lookups per I/O.

The reference to this ordered_extent is dropped at end I/O time,
which implies that an extra one must be acquired when the bio is split.
This also requires moving the btrfs_extract_ordered_extent call into
btrfs_split_bio so that the invariant of always having a valid
ordered_extent reference for the btrfs_bio is kept.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: open code btrfs_bio_end_io in btrfs_dio_submit_io

btrfs_dio_submit_io is the only place that uses btrfs_bio_end_io to end a
bio that hasn't been submitted using btrfs_submit_bio yet, and this
invariant will become a problem with upcoming changes to the btrfs bio
layer. Just open code the assignment of bi_status and the call to
btrfs_dio_end_io.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: add a is_data_bbio helper

Add a helper to check for that a btrfs_bio has a valid inode, and that
it is a data inode to key off all the special handling for data path
checksumming. Note that this uses is_data_inode instead of REQ_META as
REQ_META is only set directly before submission in submit_one_bio and
we'll also want to use this helper for error handling where REQ_META
isn't set yet.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: remove btrfs_add_ordered_extent

All callers are gone now.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: pass an ordered_extent to btrfs_submit_compressed_write

btrfs_submit_compressed_write always operates on a single ordered_extent.
Make that explicit by using btrfs_alloc_ordered_extent in the callers
and passing the ordered_extent to btrfs_submit_compressed_write. This
will help with storing and ordered_extent pointer in the btrfs_bio in
subsequent patches.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: pass an ordered_extent to btrfs_reloc_clone_csums

Both callers of btrfs_reloc_clone_csums allocate the ordered_extent that
btrfs_reloc_clone_csums operates on. Switch them to use
btrfs_alloc_ordered_extent instead of btrfs_add_ordered_extent and
pass the ordered_extent to btrfs_reloc_clone_csums instead of doing an
extra lookup.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: merge the two calls to btrfs_add_ordered_extent in run_delalloc_nocow

Refactor run_delalloc_nocow a little bit so that there is only a single
call to btrfs_add_ordered_extent instead of two.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: limit write bios to a single ordered extent

Currently buffered writeback bios are allowed to span multiple
ordered_extents, although that basically never actually happens since
commit 4a445b7b6178 ("btrfs: don't merge pages into bio if their page
offset is not contiguous").

Supporting bios than span ordered_extents complicates the file
checksumming code, and prevents us from adding an ordered_extent pointer
to the btrfs_bio structure. Use the existing code to limit a bio to
single ordered_extent for zoned device writes for all writes.

This allows to remove the REQ_BTRFS_ONE_ORDERED flags, and the
handling of multiple ordered_extents in btrfs_csum_one_bio.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: fix file_offset for REQ_BTRFS_ONE_ORDERED bios that get split

If a bio gets split, it needs to have a proper file_offset for checksum
validation and repair to work properly.

Based on feedback from Josef, commit 852eee62d31a ("btrfs: allow
btrfs_submit_bio to split bios") skipped this adjustment for ONE_ORDERED
bios. But if we actually ever need to split a ONE_ORDERED read bio, this
will lead to a wrong file offset in the repair code. Right now the only
user of the file_offset is logging of an error message so this is mostly
harmless, but the wrong offset might be more problematic for additional
users in the future.

Fixes: 852eee62d31a ("btrfs: allow btrfs_submit_bio to split bios")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: add block-group tree to lockdep classes

The block group tree was not present among the lockdep classes. We could
get potentially lockdep warnings but so far none has been seen, also
because block-group-tree is a relatively new feature.

CC: stable@vger.kernel.org # 6.1+
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: don't treat zoned writeback as being from an async helper thread

When extent_write_locked_range was originally added, it was only used
writing back compressed pages from an async helper thread. But it is
now also used for writing back pages on zoned devices, where it is
called directly from the ->writepage context. In this case we want to
be able to pass on the writeback_control instead of creating a new one,
and more importantly want to use all the normal cgroup interaction
instead of potentially deferring writeback to another helper.

Fixes: 898793d992c2 ("btrfs: zoned: write out partially allocated region")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: only call __extent_writepage_io from extent_write_locked_range

__extent_writepage does a lot of things that make no sense for
extent_write_locked_range, given that extent_write_locked_range itself is
called from __extent_writepage either directly or through a workqueue,
and all this work has already been done in the first invocation and the
pages haven't been unlocked since. Call __extent_writepage_io directly
instead and open code the logic tracked in
btrfs_bio_ctrl::extent_locked.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: move writeback_control::nr_to_write update to __extent_writepage

Move the nr_to_write accounting from __extent_writepage_io to
__extent_writepage_io as we'll grow another __extent_writepage_io that
doesn't want this accounting soon. Also drop the obsolete comment -
decrementing a counter in the on-stack writeback_control data structure
doesn't need the page lock.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: remove non-standard extent handling in __extent_writepage_io

__extent_writepage_io is never called for compressed or inline extents,
or holes. Remove the not quite working code for them and replace it with
asserts that these cases don't happen.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: remove PAGE_SET_ERROR

Now that the btrfs writeback code has stopped using PageError, using
PAGE_SET_ERROR to just set the per-address_space error flag is confusing.
Open code the mapping_set_error calls in the callers and remove
the PAGE_SET_ERROR flag.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: stop setting PageError in the data I/O path

PageError is not used by the VFS/MM and deprecated because it uses up a
page bit and has no coherent rules. Instead read errors are usually
propagated by not setting or clearing the uptodate bit, and write errors
are propagated through the address_space. Btrfs now only sets the flag
and never clears it for data pages, so just remove all places setting it,
and the subpage error bit.

Note that the error propagation for superblock writes that work on the
block device mapping still uses PageError for now, but that will be
addressed in a separate series.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: don't check PageError in __extent_writepage

__extent_writepage currenly sets PageError whenever any error happens,
and the also checks for PageError to decide if to call error handling.
This leads to very unclear responsibility for cleaning up on errors.
In the VM and generic writeback helpers the basic idea is that once
I/O is fired off all error handling responsibility is delegated to the
end I/O handler. But if that end I/O handler sets the PageError bit,
and the submitter checks it, the bit could in some cases leak into the
submission context for fast enough I/O.

Fix this by simply not checking PageError and just using the local
ret variable to check for submission errors. This also fundamentally
solves the long problem documented in a comment in __extent_writepage
by never leaking the error bit into the submission context.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: rename cow_file_range_async to run_delalloc_compressed

cow_file_range_async is only used for compressed writeback. Rename it
to run_delalloc_compressed, which also fits in with run_delalloc_nocow
and run_delalloc_zoned.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: don't fail writeback when allocating the compression context fails

If cow_file_range_async fails to allocate the asynchronous writeback
context, it currently returns an error and entirely fails the writeback.
This is not a good idea as a writeback failure is a non-temporary error
condition that will make the file system unusable. Just fall back to
synchronous uncompressed writeback instead. This requires us to delay
setting the BTRFS_INODE_HAS_ASYNC_EXTENT flag until we've committed to
the async writeback.

The compression checks INODE_NOCOMPRESS and FORCE_COMPRESS are moved
from cow_file_range_async to the preceding checks btrfs_run_delalloc_range().

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: don't check PageError in btrfs_verify_page

btrfs_verify_page is called from the readpage completion handler, which
is only used to read pages, or parts of pages that aren't uptodate yet.
The only case where PageError could be set on a page in btrfs is if we
had a previous writeback error, but in that case we won't called readpage
on it, as it has previously been marked uptodate.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: fix fsverify read error handling in end_page_read

Also clear the uptodate bit to make sure the page isn't seen as uptodate
in the page cache if fsverity verification fails.

Fixes: 146054090b08 ("btrfs: initial fsverity support")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: factor out a btrfs_verify_page helper

Split all the conditionals for the fsverity calls in end_page_read into
a btrfs_verify_page helper to keep the code readable and make additional
refactoring easier.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: fix range_end calculation in extent_write_locked_range

The range_end field in struct writeback_control is inclusive, just like
the end parameter passed to extent_write_locked_range. Not doing this
could cause extra writeout, which is harmless but suboptimal.

Fixes: 771ed689d2cd ("Btrfs: Optimize compressed writeback and reads")
CC: stable@vger.kernel.org # 5.9+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: insert tree mod log move in push_node_left

There is a fairly unlikely race condition in tree mod log rewind that
can result in a kernel panic which has the following trace:

  [530.569] BTRFS critical (device sda3): unable to find logical 0 length 4096
  [530.585] BTRFS critical (device sda3): unable to find logical 0 length 4096
  [530.602] BUG: kernel NULL pointer dereference, address: 0000000000000002
  [530.618] #PF: supervisor read access in kernel mode
  [530.629] #PF: error_code(0x0000) - not-present page
  [530.641] PGD 0 P4D 0
  [530.647] Oops: 0000 [#1] SMP
  [530.654] CPU: 30 PID: 398973 Comm: below Kdump: loaded Tainted: G S         O  K   5.12.0-0_fbk13_clang_7455_gb24de3bdb045 #1
  [530.680] Hardware name: Quanta Mono Lake-M.2 SATA 1HY9U9Z001G/Mono Lake-M.2 SATA, BIOS F20_3A15 08/16/2017
  [530.703] RIP: 0010:__btrfs_map_block+0xaa/0xd00
  [530.755] RSP: 0018:ffffc9002c2f7600 EFLAGS: 00010246
  [530.767] RAX: ffffffffffffffea RBX: ffff888292e41000 RCX: f2702d8b8be15100
  [530.784] RDX: ffff88885fda6fb8 RSI: ffff88885fd973c8 RDI: ffff88885fd973c8
  [530.800] RBP: ffff888292e410d0 R08: ffffffff82fd7fd0 R09: 00000000fffeffff
  [530.816] R10: ffffffff82e57fd0 R11: ffffffff82e57d70 R12: 0000000000000000
  [530.832] R13: 0000000000001000 R14: 0000000000001000 R15: ffffc9002c2f76f0
  [530.848] FS:  00007f38d64af000(0000) GS:ffff88885fd80000(0000) knlGS:0000000000000000
  [530.866] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [530.880] CR2: 0000000000000002 CR3: 00000002b6770004 CR4: 00000000003706e0
  [530.896] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [530.912] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [530.928] Call Trace:
  [530.934]  ? btrfs_printk+0x13b/0x18c
  [530.943]  ? btrfs_bio_counter_inc_blocked+0x3d/0x130
  [530.955]  btrfs_map_bio+0x75/0x330
  [530.963]  ? kmem_cache_alloc+0x12a/0x2d0
  [530.973]  ? btrfs_submit_metadata_bio+0x63/0x100
  [530.984]  btrfs_submit_metadata_bio+0xa4/0x100
  [530.995]  submit_extent_page+0x30f/0x360
  [531.004]  read_extent_buffer_pages+0x49e/0x6d0
  [531.015]  ? submit_extent_page+0x360/0x360
  [531.025]  btree_read_extent_buffer_pages+0x5f/0x150
  [531.037]  read_tree_block+0x37/0x60
  [531.046]  read_block_for_search+0x18b/0x410
  [531.056]  btrfs_search_old_slot+0x198/0x2f0
  [531.066]  resolve_indirect_ref+0xfe/0x6f0
  [531.076]  ? ulist_alloc+0x31/0x60
  [531.084]  ? kmem_cache_alloc_trace+0x12e/0x2b0
  [531.095]  find_parent_nodes+0x720/0x1830
  [531.105]  ? ulist_alloc+0x10/0x60
  [531.113]  iterate_extent_inodes+0xea/0x370
  [531.123]  ? btrfs_previous_extent_item+0x8f/0x110
  [531.134]  ? btrfs_search_path_in_tree+0x240/0x240
  [531.146]  iterate_inodes_from_logical+0x98/0xd0
  [531.157]  ? btrfs_search_path_in_tree+0x240/0x240
  [531.168]  btrfs_ioctl_logical_to_ino+0xd9/0x180
  [531.179]  btrfs_ioctl+0xe2/0x2eb0

This occurs when logical inode resolution takes a tree mod log sequence
number, and then while backref walking hits a rewind on a busy node
which has the following sequence of tree mod log operations (numbers
filled in from a specific example, but they are somewhat arbitrary)

  REMOVE_WHILE_FREEING slot 532
  REMOVE_WHILE_FREEING slot 531
  REMOVE_WHILE_FREEING slot 530
  ...
  REMOVE_WHILE_FREEING slot 0
  REMOVE slot 455
  REMOVE slot 454
  REMOVE slot 453
  ...
  REMOVE slot 0
  ADD slot 455
  ADD slot 454
  ADD slot 453
  ...
  ADD slot 0
  MOVE src slot 0 -> dst slot 456 nritems 533
  REMOVE slot 455
  REMOVE slot 454
  REMOVE slot 453
  ...
  REMOVE slot 0

When this sequence gets applied via btrfs_tree_mod_log_rewind, it
allocates a fresh rewind eb, and first inserts the correct key info for
the 533 elements, then overwrites the first 456 of them, then decrements
the count by 456 via the add ops, then rewinds the move by doing a
memmove from 456:988->0:532. We have never written anything past 532, so
that memmove writes garbage into the 0:532 range. In practice, this
results in a lot of fully 0 keys. The rewind then puts valid keys into
slots 0:455 with the last removes, but 456:532 are still invalid.

When search_old_slot uses this eb, if it uses one of those invalid
slots, it can then read the extent buffer and issue a bio for offset 0
which ultimately panics looking up extent mappings.

This bad tree mod log sequence gets generated when the node balancing
code happens to do a balance_node_right followed by a push_node_left
while logging in the tree mod log. Illustrated for ebs L and R (left and
right):

L                 R
  start:
  [XXX|YYY|...]      [ZZZ|...|...]
  balance_node_right:
  [XXX|YYY|...]      [...|ZZZ|...] move Z to make room for Y
  [XXX|...|...]      [YYY|ZZZ|...] copy Y from L to R
  push_node_left:
  [XXX|YYY|...]      [...|ZZZ|...] copy Y from R to L
  [XXX|YYY|...]      [ZZZ|...|...] move Z into emptied space (NOT LOGGED!)

This is because balance_node_right logs a move, but push_node_left
explicitly doesn't. That is because logging the move would remove the
overwritten src < dst range in the right eb, which was already logged
when we called btrfs_tree_mod_log_eb_copy. The correct sequence would
include a move from 456:988 to 0:532 after remove 0:455 and before
removing 0:532. Reversing that sequence would entail creating keys for
0:532, then moving those keys out to 456:988, then creating more keys
for 0:455.

i.e.,

  REMOVE_WHILE_FREEING slot 532
  REMOVE_WHILE_FREEING slot 531
  REMOVE_WHILE_FREEING slot 530
  ...
  REMOVE_WHILE_FREEING slot 0
  MOVE src slot 456 -> dst slot 0 nritems 533
  REMOVE slot 455
  REMOVE slot 454
  REMOVE slot 453
  ...
  REMOVE slot 0
  ADD slot 455
  ADD slot 454
  ADD slot 453
  ...
  ADD slot 0
  MOVE src slot 0 -> dst slot 456 nritems 533
  REMOVE slot 455
  REMOVE slot 454
  REMOVE slot 453
  ...
  REMOVE slot 0

Fix this to log the move but avoid the double remove by putting all the
logging logic in btrfs_tree_mod_log_eb_copy which has enough information
to detect these cases and properly log moves, removes, and adds. Leave
btrfs_tree_mod_log_insert_move to handle insert_ptr and delete_ptr's
tree mod logging.

(Un)fortunately, this is quite difficult to reproduce, and I was only
able to reproduce it by adding sleeps in btrfs_search_old_slot that
would encourage more log rewinding during ino_to_logical ioctls. I was
able to hit the warning in the previous patch in the series without the
fix quite quickly, but not after this patch.

CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: warn on invalid slot in tree mod log rewind

The way that tree mod log tracks the ultimate length of the eb, the
variable 'n', eventually turns up the correct value, but at intermediate
steps during the rewind, n can be inaccurate as a representation of the
end of the eb. For example, it doesn't get updated on move rewinds, and
it does get updated for add/remove in the middle of the eb.

To detect cases with invalid moves, introduce a separate variable called
max_slot which tries to track the maximum valid slot in the rewind eb.
We can then warn if we do a move whose src range goes beyond the max
valid slot.

There is a commented caveat that it is possible to have this value be an
overestimate due to the challenge of properly handling 'add' operations
in the middle of the eb, but in practice it doesn't cause enough of a
problem to throw out the max idea in favor of tracking every valid slot.

CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: disable allocation warnings for compression workspaces

The workspaces for compression are typically much larger than a page and
for high zstd levels in the range of megabytes. There's a fallback to
vmalloc but this can still fail (see the report).

Some of the workspaces are preallocated at module load time so we have a
safe fallback, otherwise when a new workspace is needed it's allocated
but if this fails then the process waits. Which means the warning is
only causing noise and we can use the GFP flag to disable it.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=217466
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: open code need_full_stripe conditions

need_full_stripe is just a somewhat complicated way to say
"op != BTRFS_MAP_READ". Just spell that explicit check out, which makes
a lot of the code currently using the helper easier to understand.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: open code btrfs_map_sblock

btrfs_map_sblock just hard codes three arguments and calls
btrfs_map_sblock. Remove it as it doesn't provide any real value, but
makes following the btrfs_map_block call chains harder.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: rename __btrfs_map_block to btrfs_map_block

Now that the old btrfs_map_block is gone, drop the leading underscores
from __btrfs_map_block.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: remove unused btrfs_map_block

There are no users of btrfs_map_block left, so remove it.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: optimize simple reads in btrfsic_map_block

Pass a smap into __btrfs_map_block so that the usual case of a read that
doesn't require parity raid recovery doesn't need an extra memory
allocation for the btrfs_io_context.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: remove unused BTRFS_MAP_DISCARD

BTRFS_MAP_DISCARD is never set, as REQ_OP_DISCARD is never passed to
btrfs_op() only only checked in two ASSERTS.

Remove it and let the catchall WARN_ON in btrfs_op() deal with accidental
REQ_OP_DISCARDs leaked into btrfs_op(). Last use was in a4012f06f188
("btrfs: split discard handling out of btrfs_map_block").

Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: add xxhash to fast checksum implementations

The implementation of XXHASH is now CPU only but still fast enough to be
considered for the synchronous checksumming, like non-generic crc32c.

A userspace benchmark comparing it to various implementations (patched
hash-speedtest from btrfs-progs):

  Block size:     4096
  Iterations:     1000000
  Implementation: builtin
  Units:          CPU cycles

NULL-NOP: cycles:     73384294, cycles/i       73
     NULL-MEMCPY: cycles:    228033868, cycles/i      228,    61664.320 MiB/s
      CRC32C-ref: cycles:  24758559416, cycles/i    24758,      567.950 MiB/s
       CRC32C-NI: cycles:   1194350470, cycles/i     1194,    11773.433 MiB/s
  CRC32C-ADLERSW: cycles:   6150186216, cycles/i     6150,     2286.372 MiB/s
  CRC32C-ADLERHW: cycles:    626979180, cycles/i      626,    22427.453 MiB/s
      CRC32C-PCL: cycles:    466746732, cycles/i      466,    30126.699 MiB/s
  XXHASH: cycles:    860656400, cycles/i      860,    16338.188 MiB/s

Comparing purely software implementation (ref), current outdated
accelerated using crc32q instruction (NI), optimized implementations by
M. Adler (https://stackoverflow.com/questions/17645167/implementing-sse-4-2s-crc32c-in-software/17646775#17646775)
and the best one that was taken from kernel using the PCLMULQDQ
instruction (PCL).

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: pass the new logical address to split_extent_map

split_extent_map splits off the first chunk of an extent map into a new
one. One of the two users is the zoned I/O completion code that wants to
rewrite the logical block start address right after this split. Pass in
the logical address to be set in the split off first extent_map as an
argument to avoid an extra extent tree lookup for this case.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: defer splitting of ordered extents until I/O completion

The btrfs zoned completion code currently needs an ordered_extent and
extent_map per bio so that it can account for the non-predictable
write location from Zone Append.  To archive that it currently splits
the ordered_extent and extent_map at I/O submission time, and then
records the actual physical address in the ->physical field of the
ordered_extent.

This patch instead switches to record the "original" physical address
that the btrfs allocator assigned in spare space in the btrfs_bio,
and then rewrites the logical address in the btrfs_ordered_sum
structure at I/O completion time.  This allows the ordered extent
completion handler to simply walk the list of ordered csums and
split the ordered extent as needed.  This removes an extra ordered
extent and extent_map lookup and manipulation during the I/O
submission path, and instead batches it in the I/O completion path
where we need to touch these anyway.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: handle completed ordered extents in btrfs_split_ordered_extent

To delay splitting ordered_extents to I/O completion time we need to be
able to handle fully completed ordered extents in
btrfs_split_ordered_extent. Besides a bit of accounting this primarily
involved moving over the csums to the split bio for the range that it
covers, which is simple enough because we always have one
btrfs_ordered_sum per bio.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: atomically insert the new extent in btrfs_split_ordered_extent

Currently there is a small race window in btrfs_split_ordered_extent,
where the reduced old extent can be looked up on the per-inode rbtree
or the per-root list while the newly split out one isn't visible yet.

Fix this by open coding btrfs_alloc_ordered_extent in
btrfs_split_ordered_extent, and holding the tree lock and
root->ordered_extent_lock over the entire tree and extent manipulation.

Note that this introduces new lock ordering because previously
ordered_extent_lock was never held over the tree lock.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: split btrfs_alloc_ordered_extent to allocation and insertion helpers

Split two low-level helpers out of btrfs_alloc_ordered_extent to allocate
and insert the logic extent. The pure alloc helper will be used to
improve btrfs_split_ordered_extent.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: return the new ordered_extent from btrfs_split_ordered_extent

Return the ordered_extent split from the passed in one. This will be
needed to be able to store an ordered_extent in the btrfs_bio.

Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: reorder conditions in btrfs_extract_ordered_extent

There is no good reason for doing one before the other in terms of
failure implications, but doing the extent_map split first will
simplify some upcoming refactoring.

Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: move split_extent_map to extent_map.c

split_extent_map doesn't have anything to do with the other code in
inode.c, so move it to extent_map.c.

This also allows marking replace_extent_mapping static.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: record orig_physical only for the original bio

btrfs_submit_dev_bio is also called for clone bios that aren't embedded
into a btrfs_bio structure, but previous commit "btrfs: optimize the
logical to physical mapping for zoned writes" added code to assign
btrfs_bio.orig_physical in it.

This is harmless right now as only the single data profile can be used
on zoned devices, but will blow up when the RAID stripe tree is added.
Move it out into the single I/O specific branch in the caller.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: optimize the logical to physical mapping for zoned writes

The current code to store the final logical to physical mapping for a
zone append write in the extent tree is rather inefficient. It first has
to split the ordered extent so that there is one ordered extent per bio,
so that it can look up the ordered extent on I/O completion in
btrfs_record_physical_zoned and store the physical LBA returned by the
block driver in the ordered extent.

btrfs_rewrite_logical_zoned then has to do a lookup in the chunk tree to
see what physical address the logical address for this bio / ordered
extent is mapped to, and then rewrite it in the extent tree.

To optimize this process, we can store the physical address assigned in
the chunk tree to the original logical address and a pointer to
btrfs_ordered_sum structure the in the btrfs_bio structure, and then use
this information to rewrite the logical address in the btrfs_ordered_sum
structure directly at I/O completion time in btrfs_record_physical_zoned.
btrfs_rewrite_logical_zoned then simply updates the logical address in
the extent tree and the ordered_extent itself.

The code in btrfs_rewrite_logical_zoned now runs for all data I/O
completions in zoned file systems, which is fine as there is no remapping
to do for non-append writes to conventional zones or for relocation, and
the overhead for quickly breaking out of the loop is very low.

Because zoned file systems now need the ordered_sums structure to
record the actual write location returned by zone append, allocate dummy
structures without the csum array for them when the I/O doesn't use
checksums, and free them when completing the ordered_extent.

Note that the btrfs_bio doesn't grow as the new field are places into
a union that is so far not used for data writes and has plenty of space
left in it.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: rename the bytenr field in struct btrfs_ordered_sum to logical

btrfs_ordered_sum::bytendr stores a logical address. Make that clear by
renaming it to ->logical.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: mark the len field in struct btrfs_ordered_sum as unsigned

len can't ever be negative, so mark it as an u32 instead of int.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: don't call btrfs_record_physical_zoned for failed append

When a zoned append command fails there is no written address reported,
so don't try to record it.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: optimize out btrfs_is_zoned for !CONFIG_BLK_DEV_ZONED

Add an IS_ENABLED check for CONFIG_BLK_DEV_ZONED in addition to the
run-time check for the zone size. This will allow to make use of
compiler dead code elimination for code guarded by btrfs_is_zoned, and
for example provide just a dangling prototype for a function instead of
adding a stub.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: make btrfs_destroy_delayed_refs() return void

btrfs_destroy_delayed_refs() always returns 0 and its single caller does
not check its return value, as it also returns void, and so does the
callers' caller and so on. This is because we are in the transaction abort
path, where we have no way to deal with errors (we are in a critical
situation) and all cleanup of resources works in a best effort fashion.
So make btrfs_destroy_delayed_refs() return void.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: remove unnecessary prototype declarations at disk-io.c

We have a few static functions at disk-io.c for which we have a forward
declaration of their prototype, but it's not needed because all those
functions are defined before they are called, so remove them.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: use a single switch statement when initializing delayed ref head

At init_delayed_ref_head(), we are using two separate if statements to
check the delayed ref head action, and initializing 'must_insert_reserved'
to false twice, once when the variable is declared and once again in an
else branch.

Make this simpler and more straightforward by having a single switch
statement, also moving the comment about a drop action to the
corresponding switch case to make it more clear and eliminating the
duplicated initialization of 'must_insert_reserved' to false.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: use bool type for delayed ref head fields that are used as booleans

There's no point in have several fields defined as 1 bit unsigned int in
struct btrfs_delayed_ref_head, we can instead use a bool type, it makes
the code a bit more readable and it doesn't change the structure size.
So switch them to proper booleans.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: assert correct lock is held at btrfs_select_ref_head()

The function btrfs_select_ref_head() iterates over the red black tree of
delayed reference heads, which is protected by the spinlock in the delayed
refs root. The function doesn't take the lock, it's taken by its single
caller, btrfs_obtain_ref_head(), because it needs to call that function
and btrfs_delayed_ref_lock() in the same critical section (delimited by
that spinlock). So assert at btrfs_select_ref_head() that we are holding
the expected lock.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: get rid of label and goto at insert_delayed_ref()

At insert_delayed_ref() there's no point of having a label and goto in the
case we were able to insert the delayed ref head. We can just add the code
under label to the if statement's body and return immediately, and also
there is no need to track the return value in a variable, we can just
return a literal true or false value directly. So do those changes.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: make insert_delayed_ref() return a bool instead of an int

insert_delayed_ref() can only return 0 or 1, to indicate if the given
delayed reference was added to the head reference or if it was merged
into an existing delayed ref, respectively. So just make it return a
boolean instead.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: use a bool to track qgroup record insertion when adding ref head

We are using an integer as a boolean to track the qgroup record insertion
status when adding a delayed reference head. Since all we need is a
boolean, switch the type from int to bool to make it more obvious.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>