Dongwoo Lee [Tue, 18 Feb 2020 08:11:43 +0000 (17:11 +0900)]
ARM: configs: tizen_bcm2711_defconfig: Enable extcon feature
To support external connection notification, enable extcon feature.
Change-Id: I178f414b85a054d73ff9fda6346fce9c36c5e6df
Signed-off-by: Dongwoo Lee <dwoo08.lee@samsung.com>
Dongwoo Lee [Tue, 18 Feb 2020 04:36:40 +0000 (13:36 +0900)]
usb: dwc2: gadget: Set extcon state for usb cable as always true
To inform to userspace as enable usb features always, set extcon
state for usb cable as connected permanently. To enable this, add
"g-extcon-always-on" property on dt.
Change-Id: I5bcc1b7560278dab8bde6fc80549bc145179574c
Signed-off-by: Dongwoo Lee <dwoo08.lee@samsung.com>
Chanwoo Choi [Fri, 14 Feb 2020 07:15:38 +0000 (16:15 +0900)]
ARM: configs: tizen_bcm2711_defconfig: Disable CONFIG_CFG80211_CRDA_SUPPORT
If CONFIG_CFG80211_CRDA_SUPPORT is enabled, kernel has been sending
the uevent until setting the regulatory domain from userspace.
But RPI4 doesn't use CRDA (Central Regulatory Domain Agent)
for wireless device. In result, CONFIG_CFG80211_CRDA_SUPPORT makes
the unneeded uevent. So that disable CONFIG_CFG80211_CRDA_SUPPORT
for removing the unuseful uevent.
Change-Id: I3ea8369ba97c9804a99bdf27f008ba4664469286
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Chanwoo Choi [Thu, 6 Feb 2020 02:03:57 +0000 (11:03 +0900)]
ARM: configs: tizen_bcm2711_defconfig: Use schedutil as default governor
In order to improve the CPU performance, use schedutil cpufreq governor
as the default governor instead of powersave governor.
RPI4 supports only two CPU frequencies of 600MHz and 1500MHz.
After changed the default governor, can check the usage information
of two frequencies by schedutil governor.
[Example]
$ cat /sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state
600000 4347
1500000 2146
Change-Id: Id2e82dbbefbd4753bc6a0689d089427ee03ece97
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Seung-Woo Kim [Thu, 6 Feb 2020 01:36:50 +0000 (10:36 +0900)]
packaging: Add kernel-headers package
For device related developement, user needs device kernel headers
package. Add kernel-headers package for rpi4.
Change-Id: I7970e02f2b10cae31e1d8899f460fc15a8bdf496
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Junghoon Kim [Mon, 20 Jan 2020 06:06:40 +0000 (15:06 +0900)]
ARM: tizen_bcm2711_defconfig: Disable RAID6_PQ_BENCHMARK
Skip the algorithm benchmarking process of RAID6. This is helpful for
systems where fast kernel startup is important. Also, The option is not
crucial for the rpi boards.
Change-Id: I68a9cc82b1320cb47442456f3f408cf7e8609c64
Signed-off-by: Junghoon Kim <jhoon20.kim@samsung.com>
Seung-Woo Kim [Mon, 6 Jan 2020 08:10:27 +0000 (17:10 +0900)]
ARM: configs: tizen_bcm2711_defconfig: Enable missing NETFILTER options for nether
To properly support nether rules, netfilter options are required
including udplite, raw, mangle and others. Enable the missing
NETFILTER options for nether.
Ref: nether rule in https://git.tizen.org/cgit/platform/core/security/nether/tree/conf/nether.rules?h=tizen
Change-Id: I99eaa86a00b5cc79ba07b88988a81a6b37b2f663
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Mon, 6 Jan 2020 01:39:15 +0000 (10:39 +0900)]
ARM: configs: tizen_bcm2711_defconfig: Enable USB SERIAL drivers for modem
To support usb modem dongle and related devices, enable USB SERIAL
drivers and ppp network interface to support the modem.
Change-Id: I755504aabd4fbcb2d6de5ec71274209c8f092ed2
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Dongwoo Lee [Wed, 18 Dec 2019 03:59:21 +0000 (12:59 +0900)]
ARM: tizen_bcm2711_defconfig: Make USB configfs as built-in
To utilize USB-C port as USB peripheral mode, this patch enables
configfs and related functions including f_fs, f_acm, and f_rndis.
Change-Id: Ib60e4566470bbbfd2ef95a7f19cbc6e280bfff3e
Signed-off-by: Dongwoo Lee <dwoo08.lee@samsung.com>
Seung-Woo Kim [Fri, 20 Dec 2019 06:30:13 +0000 (15:30 +0900)]
ARM: configs: tizen_bcm2711_defconfig: Enable tethering config options
In Tizen 6.0, network framework supports tethering from ethernet
to wifi. Enable required config options for tethering.
Ref: section 6-3 of https://git.tizen.org/cgit/platform/kernel/tizen-kernel-configs/tree/tizen/tizen_defconfig?h=tizen
Change-Id: I162d6eb89ce8d25d85659c7a2e632dbfe0909dc6
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Fri, 20 Dec 2019 07:13:36 +0000 (16:13 +0900)]
ARM: configs: tizen_bcm2711_defconfig: Enable NETFILTER_XT_MATCH_LIMIT
From Tizen network security, NETFILTER_XT_MATCH_LIMIT is used for
ipv6. So enable NETFILTER_XT_MATCH_LIMIT config option.
Change-Id: Ife75ee0a766c64fb38a0e261f41a45678ab49bd4
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Fri, 20 Dec 2019 07:08:28 +0000 (16:08 +0900)]
ARM: configs: tizen_bcm2711_defconfig: Enable HID_MULTITOUCH
To support usb multi-touch device, enable CONFIG_HID_MULTITOUCH.
Change-Id: Icafd08ffa00f7c399f7fe4040551c83184c50a75
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Jaehoon Chung [Wed, 18 Dec 2019 23:42:11 +0000 (08:42 +0900)]
ARM: config: tizen_bcm2711: Enable config relevant to DM-verity
Enable config relevant to DM-verity by default.
It doesn't affect anything until control dm-verity on System side.
Change-Id: Ia1121b170c12748ed09797188c8bb166a6efec2c
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Junghoon Kim [Mon, 9 Dec 2019 07:22:54 +0000 (16:22 +0900)]
scripts: mkbootimg_rpi4.sh: Create boot tarball for the lthor flashing
This patch is to create boot tarball for the lthor flashing. With this,
we can easily test the rpi4 kernel in the local environment.
Change-Id: I33413d641a18122612d23f3f110b7eed0997c2ea
Signed-off-by: Junghoon Kim <jhoon20.kim@samsung.com>
Hoegeun Kwon [Mon, 2 Dec 2019 00:50:36 +0000 (09:50 +0900)]
scripts: mkbootimg_rpi4.sh: Remove cmdline.txt
The cmdline.txt file is unnecessary so remove it in the script also
delete real file.
Change-Id: Ia02af211e9e46df1de413c3c9724cc54d82fcd10
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Mon, 2 Dec 2019 00:46:43 +0000 (09:46 +0900)]
scripts: mkbootimg_rpi4.sh: Add u-boot-rpi4 package to boot image
Add u-boot-rpi4 package to boot.img for u-boot boot
Change-Id: Iba486d729b5aa6c8a570db2b0854c922b5b909f6
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Jaehoon Chung [Tue, 26 Nov 2019 08:06:28 +0000 (17:06 +0900)]
ARM: dts: bcm2711-rpi-4-b: Add cts pin setting for bluetooth uart
This patch is referred to bcm2710-rpi-3-b-plus.dts.
The below is its commit-msg:
There is missing cts pin for uart0 used by bluetooth. Add the cts pin
setting as like bcm2837-rpi-3-b-plus.
Change-Id: I3e206b00145c24ddc86ad9dc57bef6f683622285
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Hoegeun Kwon [Fri, 8 Nov 2019 01:53:40 +0000 (10:53 +0900)]
rpi4: boot: Enable u-boot booting
Use u-boot for booting, enable u-boot.
Change-Id: I0c82be9e06b3d74a091f730ee3339a50582debe8
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Mon, 4 Nov 2019 09:19:38 +0000 (18:19 +0900)]
rpi4: boot: Update the firmwares for kernel v4.19.81
Update the firmwares with the latest version from the vendor git repo.
The commit base is "
b79618b5db4 kernel: Bump to 4.19.81"
Change-Id: Ica3af05ac507e3834a013d135149542723218cba
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Mon, 4 Nov 2019 09:10:59 +0000 (18:10 +0900)]
packaging: Change the kernel version of the spec file
This patch changes the kernel version of the spec file to 4.19.81.
Change-Id: Ic7789806d6418ba0cf66e3e93bc48eeb39289a7b
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Jaechul Lee [Tue, 29 Oct 2019 02:29:27 +0000 (11:29 +0900)]
ARM: dts: bcm2711-rpi-4-b: Enable dt nodes for audio, i2c1, spi0
audio, i2c1, spi0 nodes should be enabled as RPI3.
Change-Id: I8ea244b188ac8d1787c1340369f7aa90486f44d6
Reference:
5cf4f3e4 ("ARM: dts: bcm2710-rpi-3-b-plus: Enable dt nodes for audio, i2c1, spi0")
Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>
Hoegeun Kwon [Tue, 29 Oct 2019 03:25:24 +0000 (12:25 +0900)]
rpi4: boot: Fix hdmi group to DMT
There is a problem using the hdmi small monitors causes monitor to
freeze. So defines the HDMI output group DMT, set defualt mode 720p.
Change-Id: I070549ed36423755b7e8742b923f2ac18b8ccc5b
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Mon, 28 Oct 2019 08:18:09 +0000 (17:18 +0900)]
scripts: mkbootimg_rpi4.sh: Fix to install modules on non sudo
On sudo status, env variable is possible not to be preserved and
it causes failure on modules_install. So fix to install modules on
non sudo status and then move the directories and files to image
area.
[From repo of tizen rpi3:
89dcbe9b298c scripts: mkbootimg_rpi3.sh: Fix to install modules on non sudo status]
Change-Id: Ie7047c23762b668a08abf387dd76cf9cc8571937
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Mon, 28 Oct 2019 06:14:49 +0000 (15:14 +0900)]
rpi4: boot: Add to support mipi-csi camera module
Add to support mipi-csi camera module with the options, start_x=1
and disable_camera_led=1, in config.txt.
Change-Id: I450c291599031437a9fe58cac94a0d18c6cf58a9
Reference: https://www.raspberrypi.org/documentation/configuration/config-txt/boot.md
Reference: https://www.raspberrypi.org/documentation/configuration/config-txt/camera.md
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Hoegeun Kwon [Tue, 17 Sep 2019 08:54:39 +0000 (17:54 +0900)]
scripts: mkbootimg_rpi4.sh: Remove rename for kernel7l.img.
Use origin kernel image name(zImage) because of specified kernel in
the config.txt file.
Change-Id: If4a255fb3b89a892a1e7305b6ae6a33829730ae5
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Jaehoon Chung [Wed, 11 Sep 2019 00:13:18 +0000 (09:13 +0900)]
rpi4: boot: add kernel name in config.txt
Add kernel name in config.txt.
Change-Id: Iff5b38da853a54296c2eef7b6d5eaf24761b22cf
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Tue, 3 Sep 2019 01:48:57 +0000 (10:48 +0900)]
packaging: remove unnecessary requirement
Remove unnecessary requirement instead of comment.
Change-Id: I891326a384fffd192d3cac4435116c82c95bc1e3
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Hoegeun Kwon [Mon, 2 Sep 2019 02:24:41 +0000 (11:24 +0900)]
rpi4: Remove unused files
Remove unused files in rpi4.
Change-Id: I29525779cf28c33e68da9ac22abd895b2711be8c
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Sun, 1 Sep 2019 23:53:48 +0000 (08:53 +0900)]
scripts: Add mkbootimg_rpi4.sh
This script is to make boot.img and modules.img for rpi4.
Change-Id: I1a57e86070b631ba032e9cd35282f192adc6f379
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Sun, 1 Sep 2019 23:50:45 +0000 (08:50 +0900)]
rpi4: Add cmdline.txt file
The cmdline.txt file is need for boot.
Change-Id: I2a6030c2beb5dae0f8607e9e22065aaa7bf5c81d
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Thu, 29 Aug 2019 07:59:28 +0000 (16:59 +0900)]
packaging: Add spec file for rpi4
This adds linux-rpi4.spec file for armv7l rpm packaging.
Change-Id: Ic9aef54edc5f1c718ba2c301e70a4d9ee79af35d
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Thu, 29 Aug 2019 06:50:07 +0000 (15:50 +0900)]
ARM: tizen_bcm2711_defconfig: Fix modules cleanup
Always used modules changed to built-in, also remove unused modules.
Change-Id: I9304cf746e5a7559659f11dd875e7c4eb2d54175
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Tue, 20 Aug 2019 05:35:10 +0000 (14:35 +0900)]
ARM: tizen_bcm2711_defconfig: Fix I2C config to built-in
Fix i2c configuration to built-in.
Change-Id: I91870db7c34635e623b8ae1a1c102c55f746d180
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Tue, 20 Aug 2019 02:17:43 +0000 (11:17 +0900)]
ARM: tizen_bcm2711_defconfig: Fix drm-vc4 to built-in
Fix drm-vc4 configuration to built-in and dependent configuration to
built-in.
Change-Id: I36ee27e9c42a9baccba4b6e022a78acbbe5ba025
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Wed, 14 Aug 2019 09:58:44 +0000 (18:58 +0900)]
tools: Add build script for ARM kernel of rpi4
Add build script for ARM kernel of rpi4.
Change-Id: I96cf3d55235a0a67d610bf87aa9ddf4f5e972411
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Wed, 14 Aug 2019 09:51:47 +0000 (18:51 +0900)]
ARM: tizen_bcm2711_defconfig: Disable bcm2708_fb
This driver is not used at tizen.
Change-Id: Ia524fc59c17ec11578a4366d173879fb40e0ab49
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Wed, 14 Aug 2019 09:44:09 +0000 (18:44 +0900)]
ARM: tizen_bcm2711_defconfig: Enable SMACK
It needs to enable configs related with SMACK for booting tizen
platform.
Change-Id: Ia304c703afc55d13dd2a8a7d14ad8de2c208c22b
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Wed, 14 Aug 2019 09:36:30 +0000 (18:36 +0900)]
ARM: tizen_bcm2711_defconfig: Remove unused module
This module is unused.
Change-Id: Ie3524be3337a590bfe53fa93830067318150ef56
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Wed, 14 Aug 2019 02:28:15 +0000 (11:28 +0900)]
ARM: defconfig: Add tizen_bcm2711_defconfig
tizen_bcm2711_defconfig is from bcm2711_defconfig.
Change-Id: I21d1d2c7e46e8ea4cfb34b5a4465a1c4eb62967b
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Wed, 14 Aug 2019 09:58:24 +0000 (18:58 +0900)]
rpi4: config: Enable serial
Add configration to enable serial in config.txt file.
Change-Id: Ibe5971e1f068a8ef13ec7bb4e16aa9cfe1ab5feb
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Wed, 14 Aug 2019 09:58:03 +0000 (18:58 +0900)]
rpi4: Add config.txt extracted from raspbian full binary
The config.txt file is needed at boot time. And this file from binary
(https://downloads.raspberrypi.org/raspbian_full)
Change-Id: I841b11a4b400e5b44a5ca75f2f14819a35997e5e
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Hoegeun Kwon [Wed, 14 Aug 2019 09:55:53 +0000 (18:55 +0900)]
rpi4: Add boot files from github
We can get boot binaries that are necessary for booting from master
branch of https://github.com/raspberrypi/firmware.
The git base is the commit "
66bafab0055 kernel: Bump to 4.19.65"
Change-Id: Iba608e75426efcc1e45240ca532ec91807b4ce16
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Seung-Woo Kim [Wed, 17 Jul 2019 01:56:16 +0000 (10:56 +0900)]
Bluetooth: fix wrong indent in __hci_req_update_{scan/adv}_rsp_data()
The commit
ac160e08af69 ("Bluetooth: Add Advertising Packet
Configuration") introduces wrong indent which causes build warning for
gcc-7. Fix the wrong indent.
Change-Id: Ia0bde8a8f9660ccf8fa312e3c3ec6c8cb76863f1
Fixes:
ac160e08af69 ("Bluetooth: Add Advertising Packet Configuration")
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Hoegeun Kwon [Fri, 14 Oct 2022 07:02:19 +0000 (16:02 +0900)]
Bluetooth : fix build error
Update device name on remote_name_event, Fix interface define for
build error.
Change-Id: I59df4a7e30f9a83a0efdce516b2a325cb3b0983b
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
DoHyun Pyun [Thu, 4 Jul 2019 00:18:21 +0000 (09:18 +0900)]
Bluetooth: Fix the potential crash issue
There is a logic error in the event function. We should
check the callback function's parameter before calling.
Change-Id: I06a4a8c50317e5ec4ae8fe35e4b788105e090196
Fixes:
bde01c80dd51 ("Bluetooth: Set le data length command and event")
Signed-off-by: DoHyun Pyun <dh79.pyun@samsung.com>
Sudha Bheemanna [Fri, 16 Sep 2016 10:07:22 +0000 (15:37 +0530)]
Bluetooth: Set le data length command and event
Sets the data length for the le data packet with in the
advised limits. MGMT command and event are added to handle
the setting of data length.
Change-Id: Ia5c2167743cc9a29190e5631973e9d52d41caa1d
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Fri, 16 Sep 2016 07:24:31 +0000 (12:54 +0530)]
Bluetooth: Read host suggested default le data length
This patch adds MGMT command and code for supporting reading
default le data length value set at the controller.
Change-Id: I2b81982dc26ed5af4a8f8a3d3913db5d64625260
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Fri, 16 Sep 2016 06:39:57 +0000 (12:09 +0530)]
Bluetooth: Write host suggested default le data length
This patch adds MGMT command and code for supporting write
default le data length command to the controller.
Change-Id: I3d2c8b622b7913a3ed542342e3ba8076c30dc279
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Fri, 16 Sep 2016 05:08:30 +0000 (10:38 +0530)]
Bluetooth: Read LE Max data length command
This patch adds the MGMT command and code to support reading
the maximum data length supported command for LE.
Change-Id: I4dc0041f2070de2ccb6a4164c8823612863c941e
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
h.sandeep [Fri, 16 Sep 2016 09:15:24 +0000 (14:45 +0530)]
Bluetooth: Fix IPSP connection callback event issue.
This patch fixes the IPSP connection callback event issue
between kernel and bluez layer.
Change-Id: Ia4d625aa8a6dbc9da89a7d9f12308af9c90d0594
Signed-off-by: h.sandeep <h.sandeep@samsung.com>
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 15 Sep 2016 07:23:03 +0000 (12:53 +0530)]
Bluetooth: IPSP Connect/Disconnect apis
This patch adds MGMT code to support IPSP connect and
disconnect apis and handle connection state changed event.
Change-Id: I1c41ec4f38cf9a108e443def3bc23c1b964e2985
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 15 Sep 2016 04:42:09 +0000 (10:12 +0530)]
Bluetooth: Add support to enable/disable IPSP
This patch supports MGMT commands and code to enable or disable
IPSP 6LowPan features.
Change-Id: Ia866ecfa517c7d7e4320f17d94d80dfeb9261e59
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 10:51:01 +0000 (16:21 +0530)]
Bluetooth: Fix issue in the Set LE privacy function.
This patch fixes not to check the hdev power before setting
LE Privacy.
Change-Id: I344ea13b1d90527e3e7554ec616cdc640b85159c
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Mon, 12 Sep 2016 07:16:44 +0000 (12:46 +0530)]
Bluetooth: Store the key if auth type is P192
This patch allows to store the key after authentication
if auth type is "HCI_LK_AUTH_COMBINATION_P192"
Change-Id: Ie44dbe7dfec361edab61aceaf9b2ca4057b88fa5
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 11:31:39 +0000 (17:01 +0530)]
Bluetooth: Cancel the Sniff timer
This patch adds code to cancel the sniff timer.
Change-Id: I756d3b08acf6462044d1fb204064fe12ce1238c1
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 11:10:50 +0000 (16:40 +0530)]
Bluetooth: Enable sniff mode for incoming connection
Add provision to set the link poilicy to enable sniff mode
for incoming connection.
Change-Id: Ifff9e9f0838f26a6c96d81f4cbaae43429aa231f
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 10:31:23 +0000 (16:01 +0530)]
Bluetooth: Modify fast connectable type.
This patch modifies the fast connectable function
to just set the type.
Change-Id: I0cce96f85d823f9798ae7f147c4e33ce7b18e0e3
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 09:41:28 +0000 (15:11 +0530)]
Bluetooth: Send Authentication Request command on pairing failure
This patch allows to send HCI_OP_AUTH_REQUESTED command
to the remote device if pairing failure happens because
of pin or key missing error.
Change-Id: I9c28394dc06b22fd5fe9e58ac0b7d728c086bde4
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 09:24:54 +0000 (14:54 +0530)]
Bluetooth: Enable inquiry and page scan
This patch enables the inquiry and page scan after ACL
disconnection with one device and if there are no other
devices connected.
Change-Id: Ifb28be7d23f237d35112b2e0739ed55169baacf7
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 07:34:11 +0000 (13:04 +0530)]
Bluetooth: Change authentication requirement.
This patch updates the authentication requirement to general
MITM if local and remote device IO capabilities are not
NO_INPUT_NO_OUTPUT.
Change-Id: Ie3955c3f8287418e74af20d40bdf30d0f1963e31
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 06:54:43 +0000 (12:24 +0530)]
Bluetooth: Set link Supervision timeout for a connection
This patch allows to set the supervision timeout for a connection
if the device role is master.
Change-Id: I7897167ec07803f3059f2ab4d3314b0b7a951533
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 05:51:06 +0000 (11:21 +0530)]
Bluetooth: Set filter policy for LE connection
This patch sets the filter policy to a default value 0x01 during
LE auto connection if the destination address is not set. And it
updates the destination address once the LE connection complete
event is recieved during LE auto connection. And for it checks
valid destination address before cancelling LE connection when
connection timeout occurs.
Change-Id: I9877556c0b0ab4826f5f4934ead4d85b7837036d
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
[squash patches, LE connection policy, set dest address and check dest address before cancelling connection]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Wed, 7 Sep 2016 09:52:08 +0000 (15:22 +0530)]
Bluetooth: Get Advertising TX power
This patch adds MGMT command to read the advertising TX power.
Change-Id: Ide9e5d332f034928d2eae2cbd68a025a0d42be1b
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 07:07:45 +0000 (12:37 +0530)]
Bluetooth: Set the link for SCO connection
This patch sets the link policy for SCO/eSCO connection.
Change-Id: I71caef5a3887f73a10329b6886c8cf52b80e8d37
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
[add link policy setting in sco connection]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Tue, 6 Sep 2016 11:08:36 +0000 (16:38 +0530)]
Bluetooth: Add MGMT command to set SCO settings
Added code to set sco settings.
Change-Id: I37aa572436241b06e00d1e9e75964aac747eeba5
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
[remove sco link policy part]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 05:01:17 +0000 (10:31 +0530)]
Bluetooth: Add multiple LE advertise state change event
This patch adds code for providing multiple LE advertisement state
changed event to upper layer.
Change-Id: I58fb8044e74402376ec30b121081edce7c8709d1
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
[divide hci_vendor_mutli_adv_state_change_evt and remove hci event structure from mgmt]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 04:40:03 +0000 (10:10 +0530)]
Bluetooth: Add LE device found MGMT event
This patch adds new MGMT event for LE device discovery and allows
the handling of all advertisement packets in platform.
Change-Id: I1927acb75eff0b60a5899898c6d7a000e1a108ef
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Seung-Woo Kim [Wed, 28 Sep 2016 16:59:05 +0000 (01:59 +0900)]
Bluetooth: fix vendor ext rssi link alert event
This patch fixes style for rssi link alert event from vendor
specific group ext.
Change-Id: I0e7003e417c5f5a590cce8264caccad515dd3c10
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Wed, 7 Sep 2016 11:17:58 +0000 (16:47 +0530)]
Bluetooth: Add H/W TX timeout error MGMT event
This patch sends the H/W TX timeout error MGMT event if HCI command
timeout occurs after sending HCI commands.
Change-Id: I5eb593f2fe4d31c404dd94ef582790e47d03b10a
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Wed, 7 Sep 2016 10:12:22 +0000 (15:42 +0530)]
Bluetooth: Add hardware error MGMT event
Add code to handle hardware error MGMT event.
Change-Id: I5875ea2aeae7aba95c1f8e15b456704dc6bcdee4
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 8 Sep 2016 05:26:15 +0000 (10:56 +0530)]
Bluetooth: Add LE vendor specific event handler
This patch adds the vendor specific LE meta event handler.
It handles the vendor specific handles like,
LE_MULTI_ADV_STATE_CHANGE_SUB_EVENT, LE_RSSI_LINK_ALERT.
Change-Id: I1f344a31e36f9c7442fe0bd8b598e67d9f5fb9bf
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
[divide hci vendor speicif group event function]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 25 Aug 2016 07:16:07 +0000 (12:46 +0530)]
Bluetooth: Add set LE scan parameter feature
Added new MGMT command to set LE scan parameters
Change-Id: I5ea660f97e93dfcc72273971ad0250e7f582f718
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 25 Aug 2016 06:43:09 +0000 (12:13 +0530)]
Bluetooth: Set Manufacturer data feature
Added new MGMT command to set the manufacturer data
in the BR/EDR packet.
Change-Id: Ie08062f4cad0c676deab94fd95fdc1a8c5602135
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 25 Aug 2016 06:28:22 +0000 (11:58 +0530)]
Bluetooth: Add LE connection parameter update procedure
Added new MGMT command to update LE connection parameters
Change-Id: I6ae16513437cd42d40e75958aa8415baa1cbedbb
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 25 Aug 2016 06:11:34 +0000 (11:41 +0530)]
Bluetooth: Add stop LE auto connection feature
Added new MGMT command to disable LE auto connection.
Change-Id: I1f5f61b83227501ad54019008b405fd47fd722a3
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 25 Aug 2016 05:53:02 +0000 (11:23 +0530)]
Bluetooth: Add BT LE discovery feature
This patch adds new MGMT commands to start LE discovery separately
and handles LE discovery state.
Change-Id: I85958b8c2b5c7e28f57c69e86037ab1e61a75db0
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Thu, 25 Aug 2016 04:47:19 +0000 (10:17 +0530)]
Bluetooth: Update device name on remote_name_event
This patch updates the device name on receiving the HCI event
remote_name_event during connection establishment.
Change-Id: I9a217e6760b1803a70af201a3f6903e722079749
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Wed, 24 Aug 2016 11:51:15 +0000 (17:21 +0530)]
Bluetooth: Add RSSI Monitor feature
Added feature support for monitoring the RSSI value.
Commands and events for enabling, disabling and setting
rssi threshold values are added.
Change-Id: I850643a9228afc017e54217a11826b9c6a68a96b
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Wed, 24 Aug 2016 09:32:56 +0000 (15:02 +0530)]
Bluetooth: Functions to modify WhiteList
This patch provides MGMT commands to manage the white
list which includes, adding, removing and clearing the
devices from white list.
Change-Id: If71107129d3a090ae81448a8122b76accd4f5522
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: DoHyun Pyun <dh79.pyun@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Wed, 24 Aug 2016 06:47:16 +0000 (12:17 +0530)]
Bluetooth: Add Advertising Packet Configuration
This patch provides new MGMT commands to configure
the advertising data and scan response data packets for
LE peripheral devices.
Change-Id: I914d13795f4fb58e5f2e1cadb55086f4bcbc82df
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: DoHyun Pyun <dh79.pyun@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
[jhoon20.kim: adjust some codes to apply it in 5.4 kernel]
Signed-off-by: Junghoon Kim <jhoon20.kim@samsung.com>
h.sandeep [Thu, 1 Sep 2016 06:30:57 +0000 (12:00 +0530)]
Bluetooth: Add MGMT tizen_handlers and TIZEN_OP_BASE_CODE.
Added the basic skeleton code for tizen_mgmt_handlers and
mgmt_tizen.h header file.
Change-Id: I8f3100aa79e6673840ba561f0a9c50238ca0880b
Signed-off-by: h.sandeep <h.sandeep@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Sudha Bheemanna [Tue, 23 Aug 2016 11:37:10 +0000 (17:07 +0530)]
Bluetooth: Add "TIZEN_BT" flag
Added the tizen specific flag for use in adding tizen patches.
Change-Id: Ia391644fddbe600c8d845e0bf0808f587aa73e0c
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: DoHyun Pyun <dh79.pyun@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Junghoon Kim [Mon, 29 Apr 2019 22:43:58 +0000 (07:43 +0900)]
misc: tizen-inform-reboot: Use ksys_open() and ksys_close() wrappers
Using ksys_open() and ksys_close() wrappers allow us to avoid the
in-kernel calls to the sys_open() and sys_close() syscalls.
Change-Id: Iea33654daef917f88cede31675c66e8b5becad77
Signed-off-by: Junghoon Kim <jhoon20.kim@samsung.com>
Hoegeun Kwon [Thu, 7 Mar 2019 02:18:21 +0000 (11:18 +0900)]
LOCAL / mm, page_alloc: Add print page allocation failure reason
There is an unclear problem when page alloc failed. So clearly print
the cause of the failure.
Change-Id: Ie59e1d4e34deabb8733268edfb433754f43766a8
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Jaehoon Chung [Tue, 18 Sep 2018 09:43:43 +0000 (18:43 +0900)]
net: rtl8192cu: change config name as vendor driver
There is already rtl8192cu mainline driver.
To distinguish with vendor driver, changed config name to
RTL8192CU_VENDOR.
Change-Id: I2663bc12f787cc4f417a13c9b4de42b4b63a8efb
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Seung-Woo Kim [Mon, 20 Aug 2018 04:07:05 +0000 (13:07 +0900)]
staging: bcm2835-camera: fix overflow warnings
Fix overflow in implicit constant conversion warnings.
Change-Id: I3e419cb927241c9400147b36a2e36f2173c96025
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Dongwoo Lee [Thu, 5 Apr 2018 01:57:43 +0000 (10:57 +0900)]
misc: tizen-inform-reboot: Add support for download mode
To pass download mode information to bootloader, this patch adds
the new parameter 'download' to reboot command.
Change-Id: I4673a0badf42429987f91edd960b871410bfb794
Signed-off-by: Dongwoo Lee <dwoo08.lee@samsung.com>
Junghoon Kim [Tue, 17 Oct 2017 05:43:04 +0000 (14:43 +0900)]
misc: tizen-inform-reboot: resolve sync failure about reboot parameter
Currently, writing reboot paramter into INFORM partition fails
infrequently.
Resolve this issue by calling sync_filesystem function so that it writes
out and waits upon all dirty data associated with this superblock.
Change-Id: Ic62df0c3c4e565ca7211eb85661ead6979f0ad8d
Signed-off-by: Junghoon Kim <jhoon20.kim@samsung.com>
Łukasz Stelmach [Fri, 29 Sep 2017 13:24:05 +0000 (15:24 +0200)]
misc: make sure Tizen notifier is executed before reset
In case of RaspberryPi the CPU is reset by watchdog triggered from
the bcm2835_restart_notifier_call function. Tizen notifier needs higher
priority to be called before the watchdog.
Change-Id: Ia7f6d895f6f40d1a9b4e57ad41b5bdb55c94f4f2
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Junghoon Kim [Mon, 21 Aug 2017 02:04:32 +0000 (11:04 +0900)]
misc: add Tizen reboot notifier for passing reboot parameter
To determine booting mode (e.g, fota or recovery) in u-boot side, reboot
parameter should be passed through inform partition.
Add Tizen reboot notifier for passing reboot parameter.
Change-Id: I5830dcf58ec6905b0bc382599aa9ff1251f817d8
Signed-off-by: Junghoon Kim <jhoon20.kim@samsung.com>
Matthias Reichl [Sat, 14 Jan 2023 15:24:39 +0000 (16:24 +0100)]
drm/vc4: Calculate bpc based on max_requested_bpc
This aligns vc4 with Intel, AMD and Synopsis drivers and fixes max bpc
connector property not working as expected on monitors with YCbCr 4:2:2
support but not deep color support.
max_bpc in connector state is clamped at max_bpc from display info and
the latter only takes deep color modes into account so it will always
be 8, even if the display can do 4:2:2 12-bit output.
Signed-off-by: Matthias Reichl <hias@horus.com>
Dom Cobley [Mon, 6 Feb 2023 12:25:10 +0000 (12:25 +0000)]
Merge remote-tracking branch 'stable/linux-5.15.y' into rpi-5.15.y
Greg Kroah-Hartman [Mon, 6 Feb 2023 06:59:02 +0000 (07:59 +0100)]
Linux 5.15.92
Link: https://lore.kernel.org/r/20230203101007.985835823@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Ron Economos <re@w6rz.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeremy Kerr [Thu, 26 Jan 2023 06:45:51 +0000 (14:45 +0800)]
net: mctp: purge receive queues on sk destruction
commit
60bd1d9008a50cc78c4033a16a6f5d78210d481c upstream.
We may have pending skbs in the receive queue when the sk is being
destroyed; add a destructor to purge the queue.
MCTP doesn't use the error queue, so only the receive_queue is purged.
Fixes:
833ef3b91de6 ("mctp: Populate socket implementation")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230126064551.464468-1-jk@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yan Zhai [Mon, 30 Jan 2023 20:51:48 +0000 (12:51 -0800)]
net: fix NULL pointer in skb_segment_list
commit
876e8ca8366735a604bac86ff7e2732fc9d85d2d upstream.
Commit
3a1296a38d0c ("net: Support GRO/GSO fraglist chaining.")
introduced UDP listifyed GRO. The segmentation relies on frag_list being
untouched when passing through the network stack. This assumption can be
broken sometimes, where frag_list itself gets pulled into linear area,
leaving frag_list being NULL. When this happens it can trigger
following NULL pointer dereference, and panic the kernel. Reverse the
test condition should fix it.
[19185.577801][ C1] BUG: kernel NULL pointer dereference, address:
...
[19185.663775][ C1] RIP: 0010:skb_segment_list+0x1cc/0x390
...
[19185.834644][ C1] Call Trace:
[19185.841730][ C1] <TASK>
[19185.848563][ C1] __udp_gso_segment+0x33e/0x510
[19185.857370][ C1] inet_gso_segment+0x15b/0x3e0
[19185.866059][ C1] skb_mac_gso_segment+0x97/0x110
[19185.874939][ C1] __skb_gso_segment+0xb2/0x160
[19185.883646][ C1] udp_queue_rcv_skb+0xc3/0x1d0
[19185.892319][ C1] udp_unicast_rcv_skb+0x75/0x90
[19185.900979][ C1] ip_protocol_deliver_rcu+0xd2/0x200
[19185.910003][ C1] ip_local_deliver_finish+0x44/0x60
[19185.918757][ C1] __netif_receive_skb_one_core+0x8b/0xa0
[19185.927834][ C1] process_backlog+0x88/0x130
[19185.935840][ C1] __napi_poll+0x27/0x150
[19185.943447][ C1] net_rx_action+0x27e/0x5f0
[19185.951331][ C1] ? mlx5_cq_tasklet_cb+0x70/0x160 [mlx5_core]
[19185.960848][ C1] __do_softirq+0xbc/0x25d
[19185.968607][ C1] irq_exit_rcu+0x83/0xb0
[19185.976247][ C1] common_interrupt+0x43/0xa0
[19185.984235][ C1] asm_common_interrupt+0x22/0x40
...
[19186.094106][ C1] </TASK>
Fixes:
3a1296a38d0c ("net: Support GRO/GSO fraglist chaining.")
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/Y9gt5EUizK1UImEP@debian
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reinette Chatre [Mon, 25 Apr 2022 21:01:11 +0000 (14:01 -0700)]
selftests: Provide local define of __cpuid_count()
commit
a23039c7306f53416ba35d230201398ea34f4640 upstream.
Some selftests depend on information provided by the CPUID instruction.
To support this dependency the selftests implement private wrappers for
CPUID.
Duplication of the CPUID wrappers should be avoided.
Both gcc and clang/LLVM provide __cpuid_count() macros but neither
the macro nor its header file are available in all the compiler
versions that need to be supported by the selftests. __cpuid_count()
as provided by gcc is available starting with gcc v4.4, so it is
not available if the latest tests need to be run in all the
environments required to support kernels v4.9 and v4.14 that
have the minimal required gcc v3.2.
Duplicate gcc's __cpuid_count() macro to provide a centrally defined
macro for __cpuid_count() to help eliminate the duplicate CPUID wrappers
while continuing to compile in older environments.
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: Kyle Huey <me@kylehuey.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shuah Khan [Thu, 9 Dec 2021 23:35:02 +0000 (16:35 -0700)]
selftests/vm: remove ARRAY_SIZE define from individual tests
commit
e89908201e2509354c40158b517945bf3d645812 upstream.
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from vm tests and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: Kyle Huey <me@kylehuey.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shuah Khan [Wed, 8 Dec 2021 17:47:42 +0000 (10:47 -0700)]
tools: fix ARRAY_SIZE defines in tools and selftests hdrs
commit
066b34aa5461f6072dbbecb690f4fe446b736ebf upstream.
tools/include/linux/kernel.h and kselftest_harness.h are missing
ifndef guard around ARRAY_SIZE define. Fix them to avoid duplicate
define errors during compile when another file defines it. This
problem was found when compiling selftests that include a header
with ARRAY_SIZE define.
ARRAY_SIZE is defined in several selftests. There are about 25+
duplicate defines in various selftests source and header files.
Add ARRAY_SIZE to kselftest.h in preparation for removing duplicate
ARRAY_SIZE defines from individual test files.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: Kyle Huey <me@kylehuey.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Soenke Huster [Fri, 14 Jan 2022 16:44:02 +0000 (17:44 +0100)]
Bluetooth: fix null ptr deref on hci_sync_conn_complete_evt
commit
3afee2118132e93e5f6fa636dfde86201a860ab3 upstream.
This event is just specified for SCO and eSCO link types.
On the reception of a HCI_Synchronous_Connection_Complete for a BDADDR
of an existing LE connection, LE link type and a status that triggers the
second case of the packet processing a NULL pointer dereference happens,
as conn->link is NULL.
Signed-off-by: Soenke Huster <soenke.huster@eknoes.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Ovidiu Panait <ovidiu.panait@eng.windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Hansen [Thu, 22 Sep 2022 18:47:45 +0000 (11:47 -0700)]
ACPI: processor idle: Practically limit "Dummy wait" workaround to old Intel systems
commit
e400ad8b7e6a1b9102123c6240289a811501f7d9 upstream.
Old, circa 2002 chipsets have a bug: they don't go idle when they are
supposed to. So, a workaround was added to slow the CPU down and
ensure that the CPU waits a bit for the chipset to actually go idle.
This workaround is ancient and has been in place in some form since
the original kernel ACPI implementation.
But, this workaround is very painful on modern systems. The "inl()"
can take thousands of cycles (see Link: for some more detailed
numbers and some fun kernel archaeology).
First and foremost, modern systems should not be using this code.
Typical Intel systems have not used it in over a decade because it is
horribly inferior to MWAIT-based idle.
Despite this, people do seem to be tripping over this workaround on
AMD system today.
Limit the "dummy wait" workaround to Intel systems. Keep Modern AMD
systems from tripping over the workaround. Remotely modern Intel
systems use intel_idle instead of this code and will, in practice,
remain unaffected by the dummy wait.
Reported-by: K Prateek Nayak <kprateek.nayak@amd.com>
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/all/20220921063638.2489-1-kprateek.nayak@amd.com/
Link: https://lkml.kernel.org/r/20220922184745.3252932-1-dave.hansen@intel.com
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / platform / kernel / linux-rpi.git / log