Xin Long [Fri, 17 Feb 2023 23:22:57 +0000 (18:22 -0500)]
netfilter: xt_length: use skb len to match in length_mt6
For IPv6 Jumbo packets, the ipv6_hdr(skb)->payload_len is always 0,
and its real payload_len ( > 65535) is saved in hbh exthdr. With 0
length for the jumbo packets, it may mismatch.
To fix this, we can just use skb->len instead of parsing exthdrs, as
the hbh exthdr parsing has been done before coming to length_mt6 in
ip6_rcv_core() and br_validate_ipv6() and also the packet has been
trimmed according to the correct IPv6 (ext)hdr length there, and skb
len is trustable in length_mt6().
Note that this patch is especially needed after the IPv6 BIG TCP was
supported in kernel, which is using IPv6 Jumbo packets. Besides, to
match the packets greater than 65535 more properly, a v1 revision of
xt_length may be needed to extend "min, max" to u32 in the future,
and for now the IPv6 Jumbo packets can be matched by:
# ip6tables -m length ! --length 0:65535
Fixes:
7c4e983c4f3c ("net: allow gso_max_size to exceed 65536")
Fixes:
0fe79f28bfaf ("net: allow gro_max_size to exceed 65536")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Fri, 17 Feb 2023 22:20:06 +0000 (23:20 +0100)]
netfilter: ebtables: fix table blob use-after-free
We are not allowed to return an error at this point.
Looking at the code it looks like ret is always 0 at this
point, but its not.
t = find_table_lock(net, repl->name, &ret, &ebt_mutex);
... this can return a valid table, with ret != 0.
This bug causes update of table->private with the new
blob, but then frees the blob right away in the caller.
Syzbot report:
BUG: KASAN: vmalloc-out-of-bounds in __ebt_unregister_table+0xc00/0xcd0 net/bridge/netfilter/ebtables.c:1168
Read of size 4 at addr
ffffc90005425000 by task kworker/u4:4/74
Workqueue: netns cleanup_net
Call Trace:
kasan_report+0xbf/0x1f0 mm/kasan/report.c:517
__ebt_unregister_table+0xc00/0xcd0 net/bridge/netfilter/ebtables.c:1168
ebt_unregister_table+0x35/0x40 net/bridge/netfilter/ebtables.c:1372
ops_exit_list+0xb0/0x170 net/core/net_namespace.c:169
cleanup_net+0x4ee/0xb10 net/core/net_namespace.c:613
...
ip(6)tables appears to be ok (ret should be 0 at this point) but make
this more obvious.
Fixes:
c58dd2dd443c ("netfilter: Can't fail and free after table replacement")
Reported-by: syzbot+f61594de72d6705aea03@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Phil Sutter [Thu, 16 Feb 2023 16:05:36 +0000 (17:05 +0100)]
netfilter: ip6t_rpfilter: Fix regression with VRF interfaces
When calling ip6_route_lookup() for the packet arriving on the VRF
interface, the result is always the real (slave) interface. Expect this
when validating the result.
Fixes:
acc641ab95b66 ("netfilter: rpfilter/fib: Populate flowic_l3mdev field")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Tue, 14 Feb 2023 16:23:59 +0000 (17:23 +0100)]
netfilter: conntrack: fix rmmod double-free race
nf_conntrack_hash_check_insert() callers free the ct entry directly, via
nf_conntrack_free.
This isn't safe anymore because
nf_conntrack_hash_check_insert() might place the entry into the conntrack
table and then delteted the entry again because it found that a conntrack
extension has been removed at the same time.
In this case, the just-added entry is removed again and an error is
returned to the caller.
Problem is that another cpu might have picked up this entry and
incremented its reference count.
This results in a use-after-free/double-free, once by the other cpu and
once by the caller of nf_conntrack_hash_check_insert().
Fix this by making nf_conntrack_hash_check_insert() not fail anymore
after the insertion, just like before the 'Fixes' commit.
This is safe because a racing nf_ct_iterate() has to wait for us
to release the conntrack hash spinlocks.
While at it, make the function return -EAGAIN in the rmmod (genid
changed) case, this makes nfnetlink replay the command (suggested
by Pablo Neira).
Fixes:
c56716c69ce1 ("netfilter: extensions: introduce extension genid count")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Hangyu Hua [Fri, 10 Feb 2023 07:17:30 +0000 (15:17 +0800)]
netfilter: ctnetlink: fix possible refcount leak in ctnetlink_create_conntrack()
nf_ct_put() needs to be called to put the refcount got by
nf_conntrack_find_get() to avoid refcount leak when
nf_conntrack_hash_check_insert() fails.
Fixes:
7d367e06688d ("netfilter: ctnetlink: fix soft lockup when netlink adds new entries (v2)")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Wed, 8 Feb 2023 10:34:27 +0000 (11:34 +0100)]
netfilter: nf_tables: allow to fetch set elements when table has an owner
NFT_MSG_GETSETELEM returns -EPERM when fetching set elements that belong
to table that has an owner. This results in empty set/map listing from
userspace.
Fixes:
6001a930ce03 ("netfilter: nftables: introduce table ownership")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Vladimir Oltean [Sun, 5 Feb 2023 19:24:09 +0000 (21:24 +0200)]
selftests: ocelot: tc_flower_chains: make test_vlan_ingress_modify() more comprehensive
We have two IS1 filters of the OCELOT_VCAP_KEY_ANY key type (the one with
"action vlan pop" and the one with "action vlan modify") and one of the
OCELOT_VCAP_KEY_IPV4 key type (the one with "action skbedit priority").
But we have no IS1 filter with the OCELOT_VCAP_KEY_ETYPE key type, and
there was an uncaught breakage there.
To increase test coverage, convert one of the OCELOT_VCAP_KEY_ANY
filters to OCELOT_VCAP_KEY_ETYPE, by making the filter also match on the
MAC SA of the traffic sent by mausezahn, $h1_mac.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230205192409.1796428-2-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Vladimir Oltean [Sun, 5 Feb 2023 19:24:08 +0000 (21:24 +0200)]
net: mscc: ocelot: fix VCAP filters not matching on MAC with "protocol 802.1Q"
Alternative short title: don't instruct the hardware to match on
EtherType with "protocol 802.1Q" flower filters. It doesn't work for the
reasons detailed below.
With a command such as the following:
tc filter add dev $swp1 ingress chain $(IS1 2) pref 3 \
protocol 802.1Q flower skip_sw vlan_id 200 src_mac $h1_mac \
action vlan modify id 300 \
action goto chain $(IS2 0 0)
the created filter is set by ocelot_flower_parse_key() to be of type
OCELOT_VCAP_KEY_ETYPE, and etype is set to {value=0x8100, mask=0xffff}.
This gets propagated all the way to is1_entry_set() which commits it to
hardware (the VCAP_IS1_HK_ETYPE field of the key). Compare this to the
case where src_mac isn't specified - the key type is OCELOT_VCAP_KEY_ANY,
and is1_entry_set() doesn't populate VCAP_IS1_HK_ETYPE.
The problem is that for VLAN-tagged frames, the hardware interprets the
ETYPE field as holding the encapsulated VLAN protocol. So the above
filter will only match those packets which have an encapsulated protocol
of 0x8100, rather than all packets with VLAN ID 200 and the given src_mac.
The reason why this is allowed to occur is because, although we have a
block of code in ocelot_flower_parse_key() which sets "match_protocol"
to false when VLAN keys are present, that code executes too late.
There is another block of code, which executes for Ethernet addresses,
and has a "goto finished_key_parsing" and skips the VLAN header parsing.
By skipping it, "match_protocol" remains with the value it was
initialized with, i.e. "true", and "proto" is set to f->common.protocol,
or 0x8100.
The concept of ignoring some keys rather than erroring out when they are
present but can't be offloaded is dubious in itself, but is present
since the initial commit
fe3490e6107e ("net: mscc: ocelot: Hardware
ofload for tc flower filter"), and it's outside of the scope of this
patch to change that.
The problem was introduced when the driver started to interpret the
flower filter's protocol, and populate the VCAP filter's ETYPE field
based on it.
To fix this, it is sufficient to move the code that parses the VLAN keys
earlier than the "goto finished_key_parsing" instruction. This will
ensure that if we have a flower filter with both VLAN and Ethernet
address keys, it won't match on ETYPE 0x8100, because the VLAN key
parsing sets "match_protocol = false".
Fixes:
86b956de119c ("net: mscc: ocelot: support matching on EtherType")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230205192409.1796428-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Vladimir Oltean [Sun, 5 Feb 2023 14:07:13 +0000 (16:07 +0200)]
net: dsa: mt7530: don't change PVC_EG_TAG when CPU port becomes VLAN-aware
Frank reports that in a mt7530 setup where some ports are standalone and
some are in a VLAN-aware bridge, 8021q uppers of the standalone ports
lose their VLAN tag on xmit, as seen by the link partner.
This seems to occur because once the other ports join the VLAN-aware
bridge, mt7530_port_vlan_filtering() also calls
mt7530_port_set_vlan_aware(ds, cpu_dp->index), and this affects the way
that the switch processes the traffic of the standalone port.
Relevant is the PVC_EG_TAG bit. The MT7530 documentation says about it:
EG_TAG: Incoming Port Egress Tag VLAN Attribution
0: disabled (system default)
1: consistent (keep the original ingress tag attribute)
My interpretation is that this setting applies on the ingress port, and
"disabled" is basically the normal behavior, where the egress tag format
of the packet (tagged or untagged) is decided by the VLAN table
(MT7530_VLAN_EGRESS_UNTAG or MT7530_VLAN_EGRESS_TAG).
But there is also an option of overriding the system default behavior,
and for the egress tagging format of packets to be decided not by the
VLAN table, but simply by copying the ingress tag format (if ingress was
tagged, egress is tagged; if ingress was untagged, egress is untagged;
aka "consistent). This is useful in 2 scenarios:
- VLAN-unaware bridge ports will always encounter a miss in the VLAN
table. They should forward a packet as-is, though. So we use
"consistent" there. See commit
e045124e9399 ("net: dsa: mt7530: fix
tagged frames pass-through in VLAN-unaware mode").
- Traffic injected from the CPU port. The operating system is in god
mode; if it wants a packet to exit as VLAN-tagged, it sends it as
VLAN-tagged. Otherwise it sends it as VLAN-untagged*.
*This is true only if we don't consider the bridge TX forwarding offload
feature, which mt7530 doesn't support.
So for now, make the CPU port always stay in "consistent" mode to allow
software VLANs to be forwarded to their egress ports with the VLAN tag
intact, and not stripped.
Link: https://lore.kernel.org/netdev/trinity-e6294d28-636c-4c40-bb8b-b523521b00be-1674233135062@3c-app-gmx-bs36/
Fixes:
e045124e9399 ("net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode")
Reported-by: Frank Wunderlich <frank-w@public-files.de>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230205140713.1609281-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Alan Stern [Fri, 3 Feb 2023 19:32:09 +0000 (14:32 -0500)]
net: USB: Fix wrong-direction WARNING in plusb.c
The syzbot fuzzer detected a bug in the plusb network driver: A
zero-length control-OUT transfer was treated as a read instead of a
write. In modern kernels this error provokes a WARNING:
usb 1-1: BOGUS control dir, pipe
80000280 doesn't match bRequestType c0
WARNING: CPU: 0 PID: 4645 at drivers/usb/core/urb.c:411
usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411
Modules linked in:
CPU: 1 PID: 4645 Comm: dhcpcd Not tainted
6.2.0-rc6-syzkaller-00050-g9f266ccaa2f5 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google
01/12/2023
RIP: 0010:usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411
...
Call Trace:
<TASK>
usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58
usb_internal_control_msg drivers/usb/core/message.c:102 [inline]
usb_control_msg+0x320/0x4a0 drivers/usb/core/message.c:153
__usbnet_read_cmd+0xb9/0x390 drivers/net/usb/usbnet.c:2010
usbnet_read_cmd+0x96/0xf0 drivers/net/usb/usbnet.c:2068
pl_vendor_req drivers/net/usb/plusb.c:60 [inline]
pl_set_QuickLink_features drivers/net/usb/plusb.c:75 [inline]
pl_reset+0x2f/0xf0 drivers/net/usb/plusb.c:85
usbnet_open+0xcc/0x5d0 drivers/net/usb/usbnet.c:889
__dev_open+0x297/0x4d0 net/core/dev.c:1417
__dev_change_flags+0x587/0x750 net/core/dev.c:8530
dev_change_flags+0x97/0x170 net/core/dev.c:8602
devinet_ioctl+0x15a2/0x1d70 net/ipv4/devinet.c:1147
inet_ioctl+0x33f/0x380 net/ipv4/af_inet.c:979
sock_do_ioctl+0xcc/0x230 net/socket.c:1169
sock_ioctl+0x1f8/0x680 net/socket.c:1286
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x197/0x210 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The fix is to call usbnet_write_cmd() instead of usbnet_read_cmd() and
remove the USB_DIR_IN flag.
Reported-and-tested-by: syzbot+2a0e7abd24f1eb90ce25@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes:
090ffa9d0e90 ("[PATCH] USB: usbnet (9/9) module for pl2301/2302 cables")
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/00000000000052099f05f3b3e298@google.com/
Signed-off-by: David S. Miller <davem@davemloft.net>
Casper Andersson [Fri, 3 Feb 2023 08:55:57 +0000 (09:55 +0100)]
net: microchip: sparx5: fix PTP init/deinit not checking all ports
Check all ports instead of just port_count ports. PTP init was only
checking ports 0 to port_count. If the hardware ports are not mapped
starting from 0 then they would be missed, e.g. if only ports 20-30 were
mapped it would attempt to init ports 0-10, resulting in NULL pointers
when attempting to timestamp. Now it will init all mapped ports.
Fixes:
70dfe25cd866 ("net: sparx5: Update extraction/injection for timestamping")
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herton R. Krzesinski [Fri, 3 Feb 2023 16:04:48 +0000 (13:04 -0300)]
uapi: add missing ip/ipv6 header dependencies for linux/stddef.h
Since commit
58e0be1ef6118 ("net: use struct_group to copy ip/ipv6
header addresses"), ip and ipv6 headers started to use the __struct_group
definition, which is defined at include/uapi/linux/stddef.h. However,
linux/stddef.h isn't explicitly included in include/uapi/linux/{ip,ipv6}.h,
which breaks build of xskxceiver bpf selftest if you install the uapi
headers in the system:
$ make V=1 xskxceiver -C tools/testing/selftests/bpf
...
make: Entering directory '(...)/tools/testing/selftests/bpf'
gcc -g -O0 -rdynamic -Wall -Werror (...)
In file included from xskxceiver.c:79:
/usr/include/linux/ip.h:103:9: error: expected specifier-qualifier-list before ‘__struct_group’
103 | __struct_group(/* no tag */, addrs, /* no attrs */,
| ^~~~~~~~~~~~~~
...
Include the missing <linux/stddef.h> dependency in ip.h and do the
same for the ipv6.h header.
Fixes:
58e0be1ef611 ("net: use struct_group to copy ip/ipv6 header addresses")
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Anastasov [Thu, 2 Feb 2023 15:25:51 +0000 (17:25 +0200)]
neigh: make sure used and confirmed times are valid
Entries can linger in cache without timer for days, thanks to
the gc_thresh1 limit. As result, without traffic, the confirmed
time can be outdated and to appear to be in the future. Later,
on traffic, NUD_STALE entries can switch to NUD_DELAY and start
the timer which can see the invalid confirmed time and wrongly
switch to NUD_REACHABLE state instead of NUD_PROBE. As result,
timer is set many days in the future. This is more visible on
32-bit platforms, with higher HZ value.
Why this is a problem? While we expect unused entries to expire,
such entries stay in REACHABLE state for too long, locked in
cache. They are not expired normally, only when cache is full.
Problem and the wrong state change reported by Zhang Changzhong:
172.16.1.18 dev bond0 lladdr 0a:0e:0f:01:12:01 ref 1 used 350521/
15994171/350520 probes 4 REACHABLE
350520 seconds have elapsed since this entry was last updated, but it is
still in the REACHABLE state (base_reachable_time_ms is 30000),
preventing lladdr from being updated through probe.
Fix it by ensuring timer is started with valid used/confirmed
times. Considering the valid time range is LONG_MAX jiffies,
we try not to go too much in the past while we are in
DELAY/PROBE state. There are also places that need
used/updated times to be validated while timer is not running.
Reported-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Tested-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Sat, 4 Feb 2023 03:58:56 +0000 (19:58 -0800)]
Merge branch 'ionic-code-maintenance'
Shannon Nelson says:
====================
ionic: code maintenance
These are a few fixes for a hardware bug, a couple of sw bugs,
and a little code cleanup.
====================
Link: https://lore.kernel.org/r/20230202215537.69756-1-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allen Hubbe [Thu, 2 Feb 2023 21:55:37 +0000 (13:55 -0800)]
ionic: missed doorbell workaround
In one version of the HW there is a remote possibility that it
will miss the doorbell ring. This adds a bit of protection to
be sure we don't stall a queue from a missed doorbell.
Fixes:
0f3154e6bcb3 ("ionic: Add Tx and Rx handling")
Signed-off-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shannon Nelson [Thu, 2 Feb 2023 21:55:36 +0000 (13:55 -0800)]
ionic: clear up notifyq alloc commentary
Make sure the q+cq alloc for NotifyQ is clearly documented
and don't bother with unnecessary local variables.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Neel Patel [Thu, 2 Feb 2023 21:55:35 +0000 (13:55 -0800)]
ionic: clean interrupt before enabling queue to avoid credit race
Clear the interrupt credits before enabling the queue rather
than after to be sure that the enabled queue starts at 0 and
that we don't wipe away possible credits after enabling the
queue.
Fixes:
0f3154e6bcb3 ("ionic: Add Tx and Rx handling")
Signed-off-by: Neel Patel <neel.patel@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit [Thu, 2 Feb 2023 20:45:36 +0000 (21:45 +0100)]
net: phy: meson-gxl: use MMD access dummy stubs for GXL, internal PHY
Jerome provided the information that also the GXL internal PHY doesn't
support MMD register access and EEE. MMD reads return 0xffff, what
results in e.g. completely wrong ethtool --show-eee output.
Therefore use the MMD dummy stubs.
Fixes:
d853d145ea3e ("net: phy: add an option to disable EEE advertisement")
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/84432fe4-0be4-bc82-4e5c-557206b40f56@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Radhey Shyam Pandey [Thu, 2 Feb 2023 12:26:19 +0000 (17:56 +0530)]
net: macb: Perform zynqmp dynamic configuration only for SGMII interface
In zynqmp platforms where firmware supports dynamic SGMII configuration
but has other non-SGMII ethernet devices, it fails them with no packets
received at the RX interface.
To fix this behaviour perform SGMII dynamic configuration only
for the SGMII phy interface.
Fixes:
32cee7818111 ("net: macb: Add zynqmp SGMII dynamic configuration support")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reported-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1675340779-27499-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Qi Zheng [Thu, 2 Feb 2023 09:32:55 +0000 (17:32 +0800)]
bonding: fix error checking in bond_debug_reregister()
Since commit
ff9fb72bc077 ("debugfs: return error values,
not NULL") changed return value of debugfs_rename() in
error cases from %NULL to %ERR_PTR(-ERROR), we should
also check error values instead of NULL.
Fixes:
ff9fb72bc077 ("debugfs: return error values, not NULL")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20230202093256.32458-1-zhengqi.arch@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clément Léger [Tue, 31 Jan 2023 10:02:42 +0000 (11:02 +0100)]
net: phylink: move phy_device_free() to correctly release phy device
After calling fwnode_phy_find_device(), the phy device refcount is
incremented. Then, when the phy device is attached to a netdev with
phy_attach_direct(), the refcount is also incremented but only
decremented in the caller if phy_attach_direct() fails. Move
phy_device_free() before the "if" to always release it correctly.
Indeed, either phy_attach_direct() failed and we don't want to keep a
reference to the phydev or it succeeded and a reference has been taken
internally.
Fixes:
25396f680dd6 ("net: phylink: introduce phylink_fwnode_phy_connect()")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 2 Feb 2023 22:03:31 +0000 (14:03 -0800)]
Merge tag 'net-6.2-rc7' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, can and netfilter.
Current release - regressions:
- phy: fix null-deref in phy_attach_direct
- mac802154: fix possible double free upon parsing error
Previous releases - regressions:
- bpf: preserve reg parent/live fields when copying range info,
prevent mis-verification of programs as safe
- ip6: fix GRE tunnels not generating IPv6 link local addresses
- phy: dp83822: fix null-deref on DP83825/DP83826 devices
- sctp: do not check hb_timer.expires when resetting hb_timer
- eth: mtk_sock: fix SGMII configuration after phylink conversion
Previous releases - always broken:
- eth: xdp: execute xdp_do_flush() before napi_complete_done()
- skb: do not mix page pool and page referenced frags in GRO
- bpf:
- fix a possible task gone issue with bpf_send_signal[_thread]()
- fix an off-by-one bug in bpf_mem_cache_idx() to select the right
cache
- add missing btf_put to register_btf_id_dtor_kfuncs
- sockmap: fon't let sock_map_{close,destroy,unhash} call itself
- gso: fix null-deref in skb_segment_list()
- mctp: purge receive queues on sk destruction
- fix UaF caused by accept on already connected socket in exotic
socket families
- tls: don't treat list head as an entry in tls_is_tx_ready()
- netfilter: br_netfilter: disable sabotage_in hook after first
suppression
- wwan: t7xx: fix runtime PM implementation
Misc:
- MAINTAINERS: spring cleanup of networking maintainers"
* tag 'net-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
mtk_sgmii: enable PCS polling to allow SFP work
net: mediatek: sgmii: fix duplex configuration
net: mediatek: sgmii: ensure the SGMII PHY is powered down on configuration
MAINTAINERS: update SCTP maintainers
MAINTAINERS: ipv6: retire Hideaki Yoshifuji
mailmap: add John Crispin's entry
MAINTAINERS: bonding: move Veaceslav Falico to CREDITS
net: openvswitch: fix flow memory leak in ovs_flow_cmd_new
net: ethernet: mtk_eth_soc: disable hardware DSA untagging for second MAC
virtio-net: Keep stop() to follow mirror sequence of open()
selftests: net: udpgso_bench_tx: Cater for pending datagrams zerocopy benchmarking
selftests: net: udpgso_bench: Fix racing bug between the rx/tx programs
selftests: net: udpgso_bench_rx/tx: Stop when wrong CLI args are provided
selftests: net: udpgso_bench_rx: Fix 'used uninitialized' compiler warning
can: mcp251xfd: mcp251xfd_ring_set_ringparam(): assign missing tx_obj_num_coalesce_irq
can: isotp: split tx timer into transmission and timeout
can: isotp: handle wait_event_interruptible() return values
can: raw: fix CAN FD frame transmissions over CAN XL devices
can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate
hv_netvsc: Fix missed pagebuf entries in netvsc_dma_map/unmap()
...
Linus Torvalds [Thu, 2 Feb 2023 21:08:18 +0000 (13:08 -0800)]
Merge tag 'linux-kselftest-kunit-fixes-6.2-rc7' of git://git./linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"Three fixes to bugs that cause kernel crash, link error during build,
and a third to fix kunit_test_init_section_suites() extra indirection
issue"
* tag 'linux-kselftest-kunit-fixes-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: fix kunit_test_init_section_suites(...)
kunit: fix bug in KUNIT_EXPECT_MEMEQ
kunit: Export kunit_running()
Linus Torvalds [Thu, 2 Feb 2023 21:02:45 +0000 (13:02 -0800)]
Merge tag 'soc-fixes-6.2-3' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The majority of bugfixes is once more for the NXP i.MX platform,
addressing issue with i.MX8M (UART, watchdog and ethernet) as well as
imx8dxl power button and the USB modem on an imx7 board.
The reason that i.MX always shows up here is obviously not that they
are more buggy than the others, but they have the most boards and are
good about getting fixes in quickly.
The other DT fixes are for the Nuvoton wpcm450 flash controller and
the i2c mux on an ASpeed board.
Lastly, there are updates to the MAINTAINERS entries for Mediatek,
AMD/Seattle and NXP SoCs, as well as a lone code fix for error
handling in the allwinner 'rsb' bus driver"
* tag 'soc-fixes-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: wpcm450: Add nuvoton,shm = <&shm> to FIU node
MAINTAINERS: Update entry for MediaTek SoC support
MAINTAINERS: amd: drop inactive Brijesh Singh
ARM: dts: imx7d-smegw01: Fix USB host over-current polarity
arm64: dts: imx8mm-verdin: Do not power down eth-phy
MAINTAINERS: match freescale ARM64 DT directory in i.MX entry
arm64: dts: imx8mm: Fix pad control for UART1_DTE_RX
ARM: dts: aspeed: Fix pca9849 compatible
arm64: dts: freescale: imx8dxl: fix sc_pwrkey's property name linux,keycode
arm64: dts: imx8m-venice: Remove incorrect 'uart-has-rtscts'
arm64: dts: imx8mm: Reinstate GPIO watchdog always-running property on eDM SBC
bus: sunxi-rsb: Fix error handling in sunxi_rsb_init()
Linus Torvalds [Thu, 2 Feb 2023 20:52:47 +0000 (12:52 -0800)]
Merge tag 's390-6.2-4' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- With CONFIG_VMAP_STACK enabled it is not possible to load the s390
specific diag288_wdt watchdog module. The reason is that a pointer to
a string is passed to an inline assembly; this string however is
located on the stack, while the instruction within the inline
assembly expects a physicial address. Fix this by copying the string
to a kmalloc'ed buffer.
- The diag288_wdt watchdog module does not indicate that it accesses
memory from an inline assembly, which it does. Add "memory" to the
clobber list to prevent the compiler from optimizing code incorrectly
away.
- Pass size of the uncompressed kernel image to __decompress() call.
Otherwise the kernel image decompressor may corrupt/overwrite an
initrd. This was reported to happen on s390 after commit
2aa14b1ab2c4
("zstd: import usptream v1.5.2").
* tag 's390-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/decompressor: specify __decompress() buf len to avoid overflow
watchdog: diag288_wdt: fix __diag288() inline assembly
watchdog: diag288_wdt: do not use stack buffers for hardware data
Linus Torvalds [Thu, 2 Feb 2023 20:47:08 +0000 (12:47 -0800)]
Merge tag 'platform-drivers-x86-v6.2-4' of git://git./linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"A set of AMD PMF fixes + a few other small fixes"
* tag 'platform-drivers-x86-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: touchscreen_dmi: Add Chuwi Vi8 (CWI501) DMI match
platform/x86: thinkpad_acpi: Fix thinklight LED brightness returning 255
platform/x86/amd: pmc: add CONFIG_SERIO dependency
platform/x86/amd/pmf: Ensure mutexes are initialized before use
platform/x86/amd/pmf: Fix to update SPS thermals when power supply change
platform/x86/amd/pmf: Fix to update SPS default pprof thermals
platform/x86/amd/pmf: update to auto-mode limits only after AMT event
platform/x86/amd/pmf: Add helper routine to check pprof is balanced
platform/x86/amd/pmf: Add helper routine to update SPS thermals
Jakub Kicinski [Thu, 2 Feb 2023 19:55:55 +0000 (11:55 -0800)]
Merge branch 'fixes-for-mtk_eth_soc'
Bjørn Mork says:
====================
Fix mtk_eth_soc sgmii configuration.
This has been tested on a MT7986 with a Maxlinear GPY211C phy
permanently attached to the second SoC mac.
====================
Link: https://lore.kernel.org/r/20230201182331.943411-1-bjorn@mork.no
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexander Couzens [Wed, 1 Feb 2023 18:23:31 +0000 (19:23 +0100)]
mtk_sgmii: enable PCS polling to allow SFP work
Currently there is no IRQ handling (even the SGMII supports it).
Enable polling to support SFP ports.
Fixes:
14a44ab0330d ("net: mtk_eth_soc: partially convert to phylink_pcs")
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
[ bmork: changed "1" => "true" ]
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bjørn Mork [Wed, 1 Feb 2023 18:23:30 +0000 (19:23 +0100)]
net: mediatek: sgmii: fix duplex configuration
The logic of the duplex bit is inverted. Setting it means half
duplex, not full duplex.
Fix and rename macro to avoid confusion.
Fixes:
7e538372694b ("net: ethernet: mediatek: Re-add support SGMII")
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexander Couzens [Wed, 1 Feb 2023 18:23:29 +0000 (19:23 +0100)]
net: mediatek: sgmii: ensure the SGMII PHY is powered down on configuration
The code expect the PHY to be in power down which is only true after reset.
Allow changes of the SGMII parameters more than once.
Only power down when reconfiguring to avoid bouncing the link when there's
no reason to - based on code from Russell King.
There are cases when the SGMII_PHYA_PWD register contains 0x9 which
prevents SGMII from working. The SGMII still shows link but no traffic
can flow. Writing 0x0 to the PHYA_PWD register fix the issue. 0x0 was
taken from a good working state of the SGMII interface.
Fixes:
42c03844e93d ("net-next: mediatek: add support for MediaTek MT7622 SoC")
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
[ bmork: rebased and squashed into one patch ]
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 2 Feb 2023 19:51:24 +0000 (11:51 -0800)]
Merge tag 'linux-can-fixes-for-6.2-
20230202' of git://git./linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
can 2023-02-02
The first patch is by Ziyang Xuan and removes a errant WARN_ON_ONCE()
in the CAN J1939 protocol.
The next 3 patches are by Oliver Hartkopp. The first 2 target the CAN
ISO-TP protocol and fix the state machine with respect to signals and
a regression found by the syzbot.
The last patch is by me an missing assignment during the ethtool ring
configuration callback.
* tag 'linux-can-fixes-for-6.2-
20230202' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: mcp251xfd: mcp251xfd_ring_set_ringparam(): assign missing tx_obj_num_coalesce_irq
can: isotp: split tx timer into transmission and timeout
can: isotp: handle wait_event_interruptible() return values
can: raw: fix CAN FD frame transmissions over CAN XL devices
can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate
====================
Link: https://lore.kernel.org/r/20230202094135.2293939-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 2 Feb 2023 19:35:35 +0000 (11:35 -0800)]
Merge branch 'maintainers-spring-refresh-of-networking-maintainers'
Jakub Kicinski says:
====================
MAINTAINERS: spring refresh of networking maintainers
Use Jon Corbet's script for generating statistics about maintainer
coverage to identify inactive maintainers of relatively active code.
Move them to CREDITS.
====================
Link: https://lore.kernel.org/r/20230201182014.2362044-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 1 Feb 2023 18:20:14 +0000 (10:20 -0800)]
MAINTAINERS: update SCTP maintainers
Vlad has stepped away from SCTP related duties.
Move him to CREDITS and add Xin Long.
Subsystem SCTP PROTOCOL
Changes 237 / 629 (37%)
Last activity: 2022-12-12
Vlad Yasevich <vyasevich@gmail.com>:
Neil Horman <nhorman@tuxdriver.com>:
Author
20a785aa52c8 2020-05-19 00:00:00 4
Tags
20a785aa52c8 2020-05-19 00:00:00 84
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>:
Author
557fb5862c92 2021-07-28 00:00:00 41
Tags
da05cecc4939 2022-12-12 00:00:00 197
Top reviewers:
[15]: lucien.xin@gmail.com
INACTIVE MAINTAINER Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 1 Feb 2023 18:20:13 +0000 (10:20 -0800)]
MAINTAINERS: ipv6: retire Hideaki Yoshifuji
We very rarely hear from Hideaki Yoshifuji and the IPv4/IPv6
entry covers a lot of code. Asking people to CC someone who
rarely responds feels wrong.
Note that Hideaki Yoshifuji already has an entry in CREDITS
for IPv6 so not adding another one.
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 1 Feb 2023 18:20:12 +0000 (10:20 -0800)]
mailmap: add John Crispin's entry
John has not been CCed on some of the fixes which perhaps resulted
in the lack of review tags:
Subsystem MEDIATEK ETHERNET DRIVER
Changes 50 / 295 (16%)
Last activity: 2023-01-17
Felix Fietkau <nbd@nbd.name>:
Author
8bd8dcc5e47f 2022-11-18 00:00:00 33
Tags
8bd8dcc5e47f 2022-11-18 00:00:00 38
John Crispin <john@phrozen.org>:
Sean Wang <sean.wang@mediatek.com>:
Author
880c2d4b2fdf 2019-06-03 00:00:00 7
Tags
a5d75538295b 2020-04-07 00:00:00 10
Mark Lee <Mark-MC.Lee@mediatek.com>:
Author
8d66a8183d0c 2019-11-14 00:00:00 4
Tags
8d66a8183d0c 2019-11-14 00:00:00 4
Lorenzo Bianconi <lorenzo@kernel.org>:
Author
08a764a7c51b 2023-01-17 00:00:00 68
Tags
08a764a7c51b 2023-01-17 00:00:00 74
Top reviewers:
[12]: leonro@nvidia.com
[6]: f.fainelli@gmail.com
[6]: andrew@lunn.ch
INACTIVE MAINTAINER John Crispin <john@phrozen.org>
map his old address to the up to date one.
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 1 Feb 2023 18:20:11 +0000 (10:20 -0800)]
MAINTAINERS: bonding: move Veaceslav Falico to CREDITS
Veaceslav has stepped away from netdev:
Subsystem BONDING DRIVER
Changes 96 / 319 (30%)
Last activity: 2022-12-01
Jay Vosburgh <j.vosburgh@gmail.com>:
Author
4f5d33f4f798 2022-08-11 00:00:00 3
Tags
e5214f363dab 2022-12-01 00:00:00 48
Veaceslav Falico <vfalico@gmail.com>:
Andy Gospodarek <andy@greyhouse.net>:
Tags
47f706262f1d 2019-02-24 00:00:00 4
Top reviewers:
[42]: jay.vosburgh@canonical.com
[18]: jiri@nvidia.com
[10]: jtoppins@redhat.com
INACTIVE MAINTAINER Veaceslav Falico <vfalico@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fedor Pchelkin [Wed, 1 Feb 2023 21:02:18 +0000 (00:02 +0300)]
net: openvswitch: fix flow memory leak in ovs_flow_cmd_new
Syzkaller reports a memory leak of new_flow in ovs_flow_cmd_new() as it is
not freed when an allocation of a key fails.
BUG: memory leak
unreferenced object 0xffff888116668000 (size 632):
comm "syz-executor231", pid 1090, jiffies
4294844701 (age 18.871s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
00000000defa3494>] kmem_cache_zalloc include/linux/slab.h:654 [inline]
[<
00000000defa3494>] ovs_flow_alloc+0x19/0x180 net/openvswitch/flow_table.c:77
[<
00000000c67d8873>] ovs_flow_cmd_new+0x1de/0xd40 net/openvswitch/datapath.c:957
[<
0000000010a539a8>] genl_family_rcv_msg_doit+0x22d/0x330 net/netlink/genetlink.c:739
[<
00000000dff3302d>] genl_family_rcv_msg net/netlink/genetlink.c:783 [inline]
[<
00000000dff3302d>] genl_rcv_msg+0x328/0x590 net/netlink/genetlink.c:800
[<
000000000286dd87>] netlink_rcv_skb+0x153/0x430 net/netlink/af_netlink.c:2515
[<
0000000061fed410>] genl_rcv+0x24/0x40 net/netlink/genetlink.c:811
[<
000000009dc0f111>] netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
[<
000000009dc0f111>] netlink_unicast+0x545/0x7f0 net/netlink/af_netlink.c:1339
[<
000000004a5ee816>] netlink_sendmsg+0x8e7/0xde0 net/netlink/af_netlink.c:1934
[<
00000000482b476f>] sock_sendmsg_nosec net/socket.c:651 [inline]
[<
00000000482b476f>] sock_sendmsg+0x152/0x190 net/socket.c:671
[<
00000000698574ba>] ____sys_sendmsg+0x70a/0x870 net/socket.c:2356
[<
00000000d28d9e11>] ___sys_sendmsg+0xf3/0x170 net/socket.c:2410
[<
0000000083ba9120>] __sys_sendmsg+0xe5/0x1b0 net/socket.c:2439
[<
00000000c00628f8>] do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46
[<
000000004abfdcf4>] entry_SYSCALL_64_after_hwframe+0x61/0xc6
To fix this the patch rearranges the goto labels to reflect the order of
object allocations and adds appropriate goto statements on the error
paths.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes:
68bb10101e6b ("openvswitch: Fix flow lookup to use unmasked key")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230201210218.361970-1-pchelkin@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arınç ÜNAL [Sat, 28 Jan 2023 09:42:32 +0000 (12:42 +0300)]
net: ethernet: mtk_eth_soc: disable hardware DSA untagging for second MAC
According to my tests on MT7621AT and MT7623NI SoCs, hardware DSA untagging
won't work on the second MAC. Therefore, disable this feature when the
second MAC of the MT7621 and MT7623 SoCs is being used.
Fixes:
2d7605a72906 ("net: ethernet: mtk_eth_soc: enable hardware DSA untagging")
Link: https://lore.kernel.org/netdev/6249fc14-b38a-c770-36b4-5af6d41c21d3@arinc9.com/
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230128094232.2451947-1-arinc.unal@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Parav Pandit [Thu, 2 Feb 2023 16:35:16 +0000 (18:35 +0200)]
virtio-net: Keep stop() to follow mirror sequence of open()
Cited commit in fixes tag frees rxq xdp info while RQ NAPI is
still enabled and packet processing may be ongoing.
Follow the mirror sequence of open() in the stop() callback.
This ensures that when rxq info is unregistered, no rx
packet processing is ongoing.
Fixes:
754b8a21a96d ("virtio_net: setup xdp_rxq_info")
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Link: https://lore.kernel.org/r/20230202163516.12559-1-parav@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrei Gherzan [Wed, 1 Feb 2023 00:16:16 +0000 (00:16 +0000)]
selftests: net: udpgso_bench_tx: Cater for pending datagrams zerocopy benchmarking
The test tool can check that the zerocopy number of completions value is
valid taking into consideration the number of datagram send calls. This can
catch the system into a state where the datagrams are still in the system
(for example in a qdisk, waiting for the network interface to return a
completion notification, etc).
This change adds a retry logic of computing the number of completions up to
a configurable (via CLI) timeout (default: 2 seconds).
Fixes:
79ebc3c26010 ("net/udpgso_bench_tx: options to exercise TX CMSG")
Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230201001612.515730-4-andrei.gherzan@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Andrei Gherzan [Wed, 1 Feb 2023 00:16:14 +0000 (00:16 +0000)]
selftests: net: udpgso_bench: Fix racing bug between the rx/tx programs
"udpgro_bench.sh" invokes udpgso_bench_rx/udpgso_bench_tx programs
subsequently and while doing so, there is a chance that the rx one is not
ready to accept socket connections. This racing bug could fail the test
with at least one of the following:
./udpgso_bench_tx: connect: Connection refused
./udpgso_bench_tx: sendmsg: Connection refused
./udpgso_bench_tx: write: Connection refused
This change addresses this by making udpgro_bench.sh wait for the rx
program to be ready before firing off the tx one - up to a 10s timeout.
Fixes:
3a687bef148d ("selftests: udp gso benchmark")
Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230201001612.515730-3-andrei.gherzan@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Andrei Gherzan [Wed, 1 Feb 2023 00:16:12 +0000 (00:16 +0000)]
selftests: net: udpgso_bench_rx/tx: Stop when wrong CLI args are provided
Leaving unrecognized arguments buried in the output, can easily hide a
CLI/script typo. Avoid this by exiting when wrong arguments are provided to
the udpgso_bench test programs.
Fixes:
3a687bef148d ("selftests: udp gso benchmark")
Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230201001612.515730-2-andrei.gherzan@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Andrei Gherzan [Wed, 1 Feb 2023 00:16:10 +0000 (00:16 +0000)]
selftests: net: udpgso_bench_rx: Fix 'used uninitialized' compiler warning
This change fixes the following compiler warning:
/usr/include/x86_64-linux-gnu/bits/error.h:40:5: warning: ‘gso_size’ may
be used uninitialized [-Wmaybe-uninitialized]
40 | __error_noreturn (__status, __errnum, __format,
__va_arg_pack ());
|
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
udpgso_bench_rx.c: In function ‘main’:
udpgso_bench_rx.c:253:23: note: ‘gso_size’ was declared here
253 | int ret, len, gso_size, budget = 256;
Fixes:
3327a9c46352 ("selftests: add functionals test for UDP GRO")
Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230201001612.515730-1-andrei.gherzan@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hans de Goede [Thu, 2 Feb 2023 10:34:13 +0000 (11:34 +0100)]
platform/x86: touchscreen_dmi: Add Chuwi Vi8 (CWI501) DMI match
Add a DMI match for the CWI501 version of the Chuwi Vi8 tablet,
pointing to the same chuwi_vi8_data as the existing CWI506 version
DMI match.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230202103413.331459-1-hdegoede@redhat.com
Marc Kleine-Budde [Mon, 23 Jan 2023 08:03:42 +0000 (09:03 +0100)]
can: mcp251xfd: mcp251xfd_ring_set_ringparam(): assign missing tx_obj_num_coalesce_irq
If the a new ring layout is set, the max coalesced frames for RX and
TX are re-calculated, too. Add the missing assignment of the newly
calculated TX max coalesced frames.
Fixes:
656fc12ddaf8 ("can: mcp251xfd: add TX IRQ coalescing ethtool support")
Link: https://lore.kernel.org/all/20230130154334.1578518-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oliver Hartkopp [Wed, 4 Jan 2023 14:57:01 +0000 (15:57 +0100)]
can: isotp: split tx timer into transmission and timeout
The timer for the transmission of isotp PDUs formerly had two functions:
1. send two consecutive frames with a given time gap
2. monitor the timeouts for flow control frames and the echo frames
This led to larger txstate checks and potentially to a problem discovered
by syzbot which enabled the panic_on_warn feature while testing.
The former 'txtimer' function is split into 'txfrtimer' and 'txtimer'
to handle the two above functionalities with separate timer callbacks.
The two simplified timers now run in one-shot mode and make the state
transitions (especially with isotp_rcv_echo) better understandable.
Fixes:
866337865f37 ("can: isotp: fix tx state handling for echo tx processing")
Reported-by: syzbot+5aed6c3aaba661f5b917@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org # >= v6.0
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230104145701.2422-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oliver Hartkopp [Thu, 12 Jan 2023 19:23:47 +0000 (20:23 +0100)]
can: isotp: handle wait_event_interruptible() return values
When wait_event_interruptible() has been interrupted by a signal the
tx.state value might not be ISOTP_IDLE. Force the state machines
into idle state to inhibit the timer handlers to continue working.
Fixes:
866337865f37 ("can: isotp: fix tx state handling for echo tx processing")
Cc: stable@vger.kernel.org
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230112192347.1944-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oliver Hartkopp [Tue, 31 Jan 2023 10:56:13 +0000 (11:56 +0100)]
can: raw: fix CAN FD frame transmissions over CAN XL devices
A CAN XL device is always capable to process CAN FD frames. The former
check when sending CAN FD frames relied on the existence of a CAN FD
device and did not check for a CAN XL device that would be correct
too.
With this patch the CAN FD feature is enabled automatically when CAN
XL is switched on - and CAN FD cannot be switch off while CAN XL is
enabled.
This precondition also leads to a clean up and reduction of checks in
the hot path in raw_rcv() and raw_sendmsg(). Some conditions are
reordered to handle simple checks first.
changes since v1: https://lore.kernel.org/all/
20230131091012.50553-1-socketcan@hartkopp.net
- fixed typo: devive -> device
changes since v2: https://lore.kernel.org/all/
20230131091824.51026-1-socketcan@hartkopp.net/
- reorder checks in if statements to handle simple checks first
Fixes:
626332696d75 ("can: raw: add CAN XL support")
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230131105613.55228-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Ziyang Xuan [Mon, 6 Sep 2021 09:42:00 +0000 (17:42 +0800)]
can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate
The conclusion "j1939_session_deactivate() should be called with a
session ref-count of at least 2" is incorrect. In some concurrent
scenarios, j1939_session_deactivate can be called with the session
ref-count less than 2. But there is not any problem because it
will check the session active state before session putting in
j1939_session_deactivate_locked().
Here is the concurrent scenario of the problem reported by syzbot
and my reproduction log.
cpu0 cpu1
j1939_xtp_rx_eoma
j1939_xtp_rx_abort_one
j1939_session_get_by_addr [kref == 2]
j1939_session_get_by_addr [kref == 3]
j1939_session_deactivate [kref == 2]
j1939_session_put [kref == 1]
j1939_session_completed
j1939_session_deactivate
WARN_ON_ONCE(kref < 2)
=====================================================
WARNING: CPU: 1 PID: 21 at net/can/j1939/transport.c:1088 j1939_session_deactivate+0x5f/0x70
CPU: 1 PID: 21 Comm: ksoftirqd/1 Not tainted 5.14.0-rc7+ #32
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
RIP: 0010:j1939_session_deactivate+0x5f/0x70
Call Trace:
j1939_session_deactivate_activate_next+0x11/0x28
j1939_xtp_rx_eoma+0x12a/0x180
j1939_tp_recv+0x4a2/0x510
j1939_can_recv+0x226/0x380
can_rcv_filter+0xf8/0x220
can_receive+0x102/0x220
? process_backlog+0xf0/0x2c0
can_rcv+0x53/0xf0
__netif_receive_skb_one_core+0x67/0x90
? process_backlog+0x97/0x2c0
__netif_receive_skb+0x22/0x80
Fixes:
0c71437dd50d ("can: j1939: j1939_session_deactivate(): clarify lifetime of session object")
Reported-by: syzbot+9981a614060dcee6eeca@syzkaller.appspotmail.com
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20210906094200.95868-1-william.xuanziyang@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Michael Kelley [Tue, 31 Jan 2023 03:33:06 +0000 (19:33 -0800)]
hv_netvsc: Fix missed pagebuf entries in netvsc_dma_map/unmap()
netvsc_dma_map() and netvsc_dma_unmap() currently check the cp_partial
flag and adjust the page_count so that pagebuf entries for the RNDIS
portion of the message are skipped when it has already been copied into
a send buffer. But this adjustment has already been made by code in
netvsc_send(). The duplicate adjustment causes some pagebuf entries to
not be mapped. In a normal VM, this doesn't break anything because the
mapping doesn’t change the PFN. But in a Confidential VM,
dma_map_single() does bounce buffering and provides a different PFN.
Failing to do the mapping causes the wrong PFN to be passed to Hyper-V,
and various errors ensue.
Fix this by removing the duplicate adjustment in netvsc_dma_map() and
netvsc_dma_unmap().
Fixes:
846da38de0e8 ("net: netvsc: Add Isolation VM support for netvsc driver")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/1675135986-254490-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ratheesh Kannoth [Tue, 31 Jan 2023 06:16:59 +0000 (11:46 +0530)]
octeontx2-af: Fix devlink unregister
Exact match feature is only available in CN10K-B.
Unregister exact match devlink entry only for
this silicon variant.
Fixes:
87e4ea29b030 ("octeontx2-af: Debugsfs support for exact match.")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230131061659.1025137-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tom Rix [Tue, 31 Jan 2023 21:54:37 +0000 (13:54 -0800)]
igc: return an error if the mac type is unknown in igc_ptp_systim_to_hwtstamp()
clang static analysis reports
drivers/net/ethernet/intel/igc/igc_ptp.c:673:3: warning: The left operand of
'+' is a garbage value [core.UndefinedBinaryOperatorResult]
ktime_add_ns(shhwtstamps.hwtstamp, adjust);
^ ~~~~~~~~~~~~~~~~~~~~
igc_ptp_systim_to_hwtstamp() silently returns without setting the hwtstamp
if the mac type is unknown. This should be treated as an error.
Fixes:
81b055205e8b ("igc: Add support for RX timestamping")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230131215437.1528994-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yanguo Li [Tue, 31 Jan 2023 08:03:13 +0000 (09:03 +0100)]
nfp: flower: avoid taking mutex in atomic context
A mutex may sleep, which is not permitted in atomic context.
Avoid a case where this may arise by moving the to
nfp_flower_lag_get_info_from_netdev() in nfp_tun_write_neigh() spinlock.
Fixes:
abc210952af7 ("nfp: flower: tunnel neigh support bond offload")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Yanguo Li <yanguo.li@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230131080313.2076060-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 2 Feb 2023 03:52:35 +0000 (19:52 -0800)]
Merge branch 'ip-ip6_gre-fix-gre-tunnels-not-generating-ipv6-link-local-addresses'
Thomas Winter says:
====================
ip/ip6_gre: Fix GRE tunnels not generating IPv6 link local addresses
For our point-to-point GRE tunnels, they have IN6_ADDR_GEN_MODE_NONE
when they are created then we set IN6_ADDR_GEN_MODE_EUI64 when they
come up to generate the IPv6 link local address for the interface.
Recently we found that they were no longer generating IPv6 addresses.
Also, non-point-to-point tunnels were not generating any IPv6 link
local address and instead generating an IPv6 compat address,
breaking IPv6 communication on the tunnel.
These failures were caused by commit
e5dd729460ca and this patch set
aims to resolve these issues.
====================
Link: https://lore.kernel.org/r/20230131034646.237671-1-Thomas.Winter@alliedtelesis.co.nz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Thomas Winter [Tue, 31 Jan 2023 03:46:46 +0000 (16:46 +1300)]
ip/ip6_gre: Fix non-point-to-point tunnel not generating IPv6 link local address
We recently found that our non-point-to-point tunnels were not
generating any IPv6 link local address and instead generating an
IPv6 compat address, breaking IPv6 communication on the tunnel.
Previously, addrconf_gre_config always would call addrconf_addr_gen
and generate a EUI64 link local address for the tunnel.
Then commit
e5dd729460ca changed the code path so that add_v4_addrs
is called but this only generates a compat IPv6 address for
non-point-to-point tunnels.
I assume the compat address is specifically for SIT tunnels so
have kept that only for SIT - GRE tunnels now always generate link
local addresses.
Fixes:
e5dd729460ca ("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address")
Signed-off-by: Thomas Winter <Thomas.Winter@alliedtelesis.co.nz>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Thomas Winter [Tue, 31 Jan 2023 03:46:45 +0000 (16:46 +1300)]
ip/ip6_gre: Fix changing addr gen mode not generating IPv6 link local address
For our point-to-point GRE tunnels, they have IN6_ADDR_GEN_MODE_NONE
when they are created then we set IN6_ADDR_GEN_MODE_EUI64 when they
come up to generate the IPv6 link local address for the interface.
Recently we found that they were no longer generating IPv6 addresses.
This issue would also have affected SIT tunnels.
Commit
e5dd729460ca changed the code path so that GRE tunnels
generate an IPv6 address based on the tunnel source address.
It also changed the code path so GRE tunnels don't call addrconf_addr_gen
in addrconf_dev_config which is called by addrconf_sysctl_addr_gen_mode
when the IN6_ADDR_GEN_MODE is changed.
This patch aims to fix this issue by moving the code in addrconf_notify
which calls the addr gen for GRE and SIT into a separate function
and calling it in the places that expect the IPv6 address to be
generated.
The previous addrconf_dev_config is renamed to addrconf_eth_config
since it only expected eth type interfaces and follows the
addrconf_gre/sit_config format.
A part of this changes means that the loopback address will be
attempted to be configured when changing addr_gen_mode for lo.
This should not be a problem because the address should exist anyway
and if does already exist then no error is produced.
Fixes:
e5dd729460ca ("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address")
Signed-off-by: Thomas Winter <Thomas.Winter@alliedtelesis.co.nz>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 1 Feb 2023 18:31:53 +0000 (10:31 -0800)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Just small bugfixes all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa: ifcvf: Do proper cleanup if IFCVF init fails
vhost-scsi: unbreak any layout for response
tools/virtio: fix the vringh test for virtio ring changes
vhost/net: Clear the pending messages when the backend is removed
Linus Torvalds [Wed, 1 Feb 2023 18:26:23 +0000 (10:26 -0800)]
Merge tag 'sound-6.2-rc7' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A bit higher volume of changes than wished, but each change is
relatively small and the fix targets are mostly device-specific, so
those should be safe as a late stage merge.
The most significant LoC is about the memalloc helper fix, which is
applied only to Xen PV. The other major parts are ASoC Intel SOF and
AVS fixes that are scattered as various small code changes. The rest
are device-specific fixes and quirks for HD- and USB-audio, FireWire
and ASoC AMD / HDMI"
* tag 'sound-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ALSA: firewire-motu: fix unreleased lock warning in hwdep device
ALSA: memalloc: Workaround for Xen PV
ASoC: cs42l56: fix DT probe
ASoC: codecs: wsa883x: correct playback min/max rates
ALSA: hda/realtek: Add Acer Predator PH315-54
ASoC: amd: yc: Add Xiaomi Redmi Book Pro 15 2022 into DMI table
ALSA: hda: Do not unset preset when cleaning up codec
ASoC: SOF: sof-audio: prepare_widgets: Check swidget for NULL on sink failure
ASoC: hdmi-codec: zero clear HDMI pdata
ASoC: SOF: ipc4-mtrace: prevent underflow in sof_ipc4_priority_mask_dfs_write()
ASoC: Intel: sof_ssp_amp: always set dpcm_capture for amplifiers
ASoC: Intel: sof_nau8825: always set dpcm_capture for amplifiers
ASoC: Intel: sof_cs42l42: always set dpcm_capture for amplifiers
ASoC: Intel: sof_rt5682: always set dpcm_capture for amplifiers
ALSA: hda/via: Avoid potential array out-of-bound in add_secret_dac_path()
ALSA: usb-audio: Add FIXED_RATE quirk for JBL Quantum610 Wireless
ALSA: hda/realtek: fix mute/micmute LEDs, speaker don't work for a HP platform
ASoC: SOF: keep prepare/unprepare widgets in sink path
ASoC: SOF: sof-audio: skip prepare/unprepare if swidget is NULL
ASoC: SOF: sof-audio: unprepare when swidget->use_count > 0
...
Jonathan Neuschäfer [Wed, 1 Feb 2023 04:41:58 +0000 (15:11 +1030)]
ARM: dts: wpcm450: Add nuvoton,shm = <&shm> to FIU node
The Flash Interface Unit (FIU) should have a reference to the Shared
Memory controller (SHM) so that flash access from the host (x86 computer
managed by the WPCM450 BMC) can be blocked during flash access by the
FIU driver.
Fixes:
38abcb0d68767 ("ARM: dts: wpcm450: Add FIU SPI controller node")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20230129112611.1176517-1-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230201044158.962417-1-joel@jms.id.au
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Matthias Brugger [Wed, 1 Feb 2023 15:22:56 +0000 (16:22 +0100)]
MAINTAINERS: Update entry for MediaTek SoC support
The linux-mediatek IRC channel has moved to liber.chat for quite some
time. Apart from that, not all patches are also send to LKML, so add
this ML explicitly.
And last but not least:
Angelo does a wunderfull job in reviewing patches for all kind of
devices from MediaTek.
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20230201152256.19514-1-matthias.bgg@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Jakub Kicinski [Wed, 1 Feb 2023 05:19:20 +0000 (21:19 -0800)]
Merge git://git./linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Release bridge info once packet escapes the br_netfilter path,
from Florian Westphal.
2) Revert incorrect fix for the SCTP connection tracking chunk
iterator, also from Florian.
First path fixes a long standing issue, the second path addresses
a mistake in the previous pull request for net.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
Revert "netfilter: conntrack: fix bug in for_each_sctp_chunk"
netfilter: br_netfilter: disable sabotage_in hook after first suppression
====================
Link: https://lore.kernel.org/r/20230131133158.4052-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Chris Healy [Mon, 30 Jan 2023 23:14:02 +0000 (15:14 -0800)]
net: phy: meson-gxl: Add generic dummy stubs for MMD register access
The Meson G12A Internal PHY does not support standard IEEE MMD extended
register access, therefore add generic dummy stubs to fail the read and
write MMD calls. This is necessary to prevent the core PHY code from
erroneously believing that EEE is supported by this PHY even though this
PHY does not support EEE, as MMD register access returns all FFFFs.
Fixes:
5c3407abb338 ("net: phy: meson-gxl: add g12a support")
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Chris Healy <healych@amazon.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20230130231402.471493-1-cphealy@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yan Zhai [Mon, 30 Jan 2023 20:51:48 +0000 (12:51 -0800)]
net: fix NULL pointer in skb_segment_list
Commit
3a1296a38d0c ("net: Support GRO/GSO fraglist chaining.")
introduced UDP listifyed GRO. The segmentation relies on frag_list being
untouched when passing through the network stack. This assumption can be
broken sometimes, where frag_list itself gets pulled into linear area,
leaving frag_list being NULL. When this happens it can trigger
following NULL pointer dereference, and panic the kernel. Reverse the
test condition should fix it.
[19185.577801][ C1] BUG: kernel NULL pointer dereference, address:
...
[19185.663775][ C1] RIP: 0010:skb_segment_list+0x1cc/0x390
...
[19185.834644][ C1] Call Trace:
[19185.841730][ C1] <TASK>
[19185.848563][ C1] __udp_gso_segment+0x33e/0x510
[19185.857370][ C1] inet_gso_segment+0x15b/0x3e0
[19185.866059][ C1] skb_mac_gso_segment+0x97/0x110
[19185.874939][ C1] __skb_gso_segment+0xb2/0x160
[19185.883646][ C1] udp_queue_rcv_skb+0xc3/0x1d0
[19185.892319][ C1] udp_unicast_rcv_skb+0x75/0x90
[19185.900979][ C1] ip_protocol_deliver_rcu+0xd2/0x200
[19185.910003][ C1] ip_local_deliver_finish+0x44/0x60
[19185.918757][ C1] __netif_receive_skb_one_core+0x8b/0xa0
[19185.927834][ C1] process_backlog+0x88/0x130
[19185.935840][ C1] __napi_poll+0x27/0x150
[19185.943447][ C1] net_rx_action+0x27e/0x5f0
[19185.951331][ C1] ? mlx5_cq_tasklet_cb+0x70/0x160 [mlx5_core]
[19185.960848][ C1] __do_softirq+0xbc/0x25d
[19185.968607][ C1] irq_exit_rcu+0x83/0xb0
[19185.976247][ C1] common_interrupt+0x43/0xa0
[19185.984235][ C1] asm_common_interrupt+0x22/0x40
...
[19186.094106][ C1] </TASK>
Fixes:
3a1296a38d0c ("net: Support GRO/GSO fraglist chaining.")
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/Y9gt5EUizK1UImEP@debian
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 30 Jan 2023 19:30:51 +0000 (21:30 +0200)]
net: fman: memac: free mdio device if lynx_pcs_create() fails
When memory allocation fails in lynx_pcs_create() and it returns NULL,
there remains a dangling reference to the mdiodev returned by
of_mdio_find_device() which is leaked as soon as memac_pcs_create()
returns empty-handed.
Fixes:
a7c2a32e7f22 ("net: fman: memac: Use lynx pcs driver")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://lore.kernel.org/r/20230130193051.563315-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xin Long [Mon, 30 Jan 2023 16:25:33 +0000 (11:25 -0500)]
sctp: do not check hb_timer.expires when resetting hb_timer
It tries to avoid the frequently hb_timer refresh in commit
ba6f5e33bdbb
("sctp: avoid refreshing heartbeat timer too often"), and it only allows
mod_timer when the new expires is after hb_timer.expires. It means even
a much shorter interval for hb timer gets applied, it will have to wait
until the current hb timer to time out.
In sctp_do_8_2_transport_strike(), when a transport enters PF state, it
expects to update the hb timer to resend a heartbeat every rto after
calling sctp_transport_reset_hb_timer(), which will not work as the
change mentioned above.
The frequently hb_timer refresh was caused by sctp_transport_reset_timers()
called in sctp_outq_flush() and it was already removed in the commit above.
So we don't have to check hb_timer.expires when resetting hb_timer as it is
now not called very often.
Fixes:
ba6f5e33bdbb ("sctp: avoid refreshing heartbeat timer too often")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/d958c06985713ec84049a2d5664879802710179a.1675095933.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 1 Feb 2023 00:02:05 +0000 (16:02 -0800)]
Merge tag 'cgroup-for-6.2-fixes' of git://git./linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
"cpuset has a bug which can cause an oops after some configuration
operations, introduced during the v6.1 cycle.
This single commit fixes the bug"
* tag 'cgroup-for-6.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Fix wrong check in update_parent_subparts_cpumask()
Waiman Long [Tue, 31 Jan 2023 15:48:03 +0000 (10:48 -0500)]
cgroup/cpuset: Fix wrong check in update_parent_subparts_cpumask()
It was found that the check to see if a partition could use up all
the cpus from the parent cpuset in update_parent_subparts_cpumask()
was incorrect. As a result, it is possible to leave parent with no
effective cpu left even if there are tasks in the parent cpuset. This
can lead to system panic as reported in [1].
Fix this probem by updating the check to fail the enabling the partition
if parent's effective_cpus is a subset of the child's cpus_allowed.
Also record the error code when an error happens in update_prstate()
and add a test case where parent partition and child have the same cpu
list and parent has task. Enabling partition in the child will fail in
this case.
[1] https://www.spinics.net/lists/cgroups/msg36254.html
Fixes:
f0af1bfc27b5 ("cgroup/cpuset: Relax constraints to partition & cpus changes")
Cc: stable@vger.kernel.org # v6.1
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Linus Torvalds [Tue, 31 Jan 2023 19:39:08 +0000 (11:39 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two core fixes.
One simply moves an annotation from put to release to avoid the
warning triggering needlessly in alua, but to keep it in case release
is ever called from that path (which we don't think will happen).
The other reverts a change to the PQ=1 target scanning behaviour
that's under intense discussion at the moment"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: Revert "scsi: core: map PQ=1, PDT=other values to SCSI_SCAN_TARGET_PRESENT"
scsi: core: Fix the scsi_device_put() might_sleep annotation
Linus Torvalds [Tue, 31 Jan 2023 19:17:38 +0000 (11:17 -0800)]
Merge tag 'media/v6.2-3' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"A couple of v4l2 core fixes:
- fix a regression on strings control support
- fix a regression for some drivers that depend on an odd streaming
behavior"
* tag 'media/v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: videobuf2: set q->streaming later
media: v4l2-ctrls-api.c: move ctrl->is_new = 1 to the correct line
Vasily Gorbik [Sun, 29 Jan 2023 22:47:23 +0000 (23:47 +0100)]
s390/decompressor: specify __decompress() buf len to avoid overflow
Historically calls to __decompress() didn't specify "out_len" parameter
on many architectures including s390, expecting that no writes beyond
uncompressed kernel image are performed. This has changed since commit
2aa14b1ab2c4 ("zstd: import usptream v1.5.2") which includes zstd library
commit
6a7ede3dfccb ("Reduce size of dctx by reutilizing dst buffer
(#2751)"). Now zstd decompression code might store literal buffer in
the unwritten portion of the destination buffer. Since "out_len" is
not set, it is considered to be unlimited and hence free to use for
optimization needs. On s390 this might corrupt initrd or ipl report
which are often placed right after the decompressor buffer. Luckily the
size of uncompressed kernel image is already known to the decompressor,
so to avoid the problem simply specify it in the "out_len" parameter.
Link: https://github.com/facebook/zstd/commit/6a7ede3dfccb
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Link: https://lore.kernel.org/r/patch-1.thread-41c676.git-41c676c2d153.your-ad-here.call-01675030179-ext-9637@work.hours
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Brendan Higgins [Tue, 31 Jan 2023 02:35:03 +0000 (10:35 +0800)]
kunit: fix kunit_test_init_section_suites(...)
Looks like kunit_test_init_section_suites(...) was messed up in a merge
conflict. This fixes it.
kunit_test_init_section_suites(...) was not updated to avoid the extra
level of indirection when .kunit_test_suites was flattened. Given no-one
was actively using it, this went unnoticed for a long period of time.
Fixes:
e5857d396f35 ("kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites")
Signed-off-by: Brendan Higgins <brendan.higgins@linux.dev>
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Martin Fernandez <martin.fernandez@eclypsium.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Florian Westphal [Thu, 26 Jan 2023 01:35:21 +0000 (02:35 +0100)]
Revert "netfilter: conntrack: fix bug in for_each_sctp_chunk"
There is no bug. If sch->length == 0, this would result in an infinite
loop, but first caller, do_basic_checks(), errors out in this case.
After this change, packets with bogus zero-length chunks are no longer
detected as invalid, so revert & add comment wrt. 0 length check.
Fixes:
98ee00774525 ("netfilter: conntrack: fix bug in for_each_sctp_chunk")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Mon, 30 Jan 2023 10:39:29 +0000 (11:39 +0100)]
netfilter: br_netfilter: disable sabotage_in hook after first suppression
When using a xfrm interface in a bridged setup (the outgoing device is
bridged), the incoming packets in the xfrm interface are only tracked
in the outgoing direction.
$ brctl show
bridge name interfaces
br_eth1 eth1
$ conntrack -L
tcp 115 SYN_SENT src=192... dst=192... [UNREPLIED] ...
If br_netfilter is enabled, the first (encrypted) packet is received onR
eth1, conntrack hooks are called from br_netfilter emulation which
allocates nf_bridge info for this skb.
If the packet is for local machine, skb gets passed up the ip stack.
The skb passes through ip prerouting a second time. br_netfilter
ip_sabotage_in supresses the re-invocation of the hooks.
After this, skb gets decrypted in xfrm layer and appears in
network stack a second time (after decryption).
Then, ip_sabotage_in is called again and suppresses netfilter
hook invocation, even though the bridge layer never called them
for the plaintext incarnation of the packet.
Free the bridge info after the first suppression to avoid this.
I was unable to figure out where the regression comes from, as far as i
can see br_netfilter always had this problem; i did not expect that skb
is looped again with different headers.
Fixes:
c4b0e771f906 ("netfilter: avoid using skb->nf_bridge directly")
Reported-and-tested-by: Wolfgang Nothdurft <wolfgang@linogate.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Kees Cook [Fri, 27 Jan 2023 22:40:37 +0000 (14:40 -0800)]
net: sched: sch: Bounds check priority
Nothing was explicitly bounds checking the priority index used to access
clpriop[]. WARN and bail out early if it's pathological. Seen with GCC 13:
../net/sched/sch_htb.c: In function 'htb_activate_prios':
../net/sched/sch_htb.c:437:44: warning: array subscript [0, 31] is outside array bounds of 'struct htb_prio[8]' [-Warray-bounds=]
437 | if (p->inner.clprio[prio].feed.rb_node)
| ~~~~~~~~~~~~~~~^~~~~~
../net/sched/sch_htb.c:131:41: note: while referencing 'clprio'
131 | struct htb_prio clprio[TC_HTB_NUMPRIO];
| ^~~~~~
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20230127224036.never.561-kees@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Kees Cook [Fri, 27 Jan 2023 22:38:54 +0000 (14:38 -0800)]
net: ethernet: mtk_eth_soc: Avoid truncating allocation
There doesn't appear to be a reason to truncate the allocation used for
flow_info, so do a full allocation and remove the unused empty struct.
GCC does not like having a reference to an object that has been
partially allocated, as bounds checking may become impossible when
such an object is passed to other code. Seen with GCC 13:
../drivers/net/ethernet/mediatek/mtk_ppe.c: In function 'mtk_foe_entry_commit_subflow':
../drivers/net/ethernet/mediatek/mtk_ppe.c:623:18: warning: array subscript 'struct mtk_flow_entry[0]' is partly outside array bounds of 'unsigned char[48]' [-Warray-bounds=]
623 | flow_info->l2_data.base_flow = entry;
| ^~
Cc: Felix Fietkau <nbd@nbd.name>
Cc: John Crispin <john@phrozen.org>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Mark Lee <Mark-MC.Lee@mediatek.com>
Cc: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230127223853.never.014-kees@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Takashi Sakamoto [Mon, 30 Jan 2023 14:15:40 +0000 (23:15 +0900)]
ALSA: firewire-motu: fix unreleased lock warning in hwdep device
Smatch static analysis tool detects that acquired lock is not released
in hwdep device when condition branch is passed due to no event. It is
unlikely to occur, while fulfilling is preferable for better coding.
Reported-by: Dan Carpenter <error27@gmail.com>
Fixes:
634ec0b2906e ("ALSA: firewire-motu: notify event for parameter change in register DSP model")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230130141540.102854-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Jakub Kicinski [Tue, 31 Jan 2023 05:11:11 +0000 (21:11 -0800)]
Merge tag 'ieee802154-for-net-2023-01-30' of git://git./linux/kernel/git/sschmidt/wpan
Stefan Schmidt says:
====================
ieee802154 for net 2023-01-30
Only one fix this time around.
Miquel Raynal fixed a potential double free spotted by Dan Carpenter.
* tag 'ieee802154-for-net-2023-01-30' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan:
mac802154: Fix possible double free upon parsing error
====================
Link: https://lore.kernel.org/r/20230130095646.301448-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pietro Borrello [Sat, 28 Jan 2023 16:29:17 +0000 (16:29 +0000)]
net/tls: tls_is_tx_ready() checked list_entry
tls_is_tx_ready() checks that list_first_entry() does not return NULL.
This condition can never happen. For empty lists, list_first_entry()
returns the list_entry() of the head, which is a type confusion.
Use list_first_entry_or_null() which returns NULL in case of empty
lists.
Fixes:
a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Link: https://lore.kernel.org/r/20230128-list-entry-null-check-tls-v1-1-525bbfe6f0d0@diag.uniroma1.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 31 Jan 2023 05:02:44 +0000 (21:02 -0800)]
Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-01-27 (ice)
This series contains updates to ice driver only.
Dave prevents modifying channels when RDMA is active as this will break
RDMA traffic.
Michal fixes a broken URL.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix broken link in ice NAPI doc
ice: Prevent set_channel from changing queues while RDMA active
====================
Link: https://lore.kernel.org/r/20230127225333.1534783-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rae Moar [Fri, 27 Jan 2023 20:39:50 +0000 (20:39 +0000)]
kunit: fix bug in KUNIT_EXPECT_MEMEQ
In KUNIT_EXPECT_MEMEQ and KUNIT_EXPECT_MEMNEQ, add check if one of the
inputs is NULL and fail if this is the case.
Currently, the kernel crashes if one of the inputs is NULL. Instead,
fail the test and add an appropriate error message.
Fixes:
b8a926bea8b1 ("kunit: Introduce KUNIT_EXPECT_MEMEQ and KUNIT_EXPECT_MEMNEQ macros")
This was found by the kernel test robot:
https://lore.kernel.org/all/
202212191448.D6EDPdOh-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Linus Torvalds [Mon, 30 Jan 2023 19:58:53 +0000 (11:58 -0800)]
Merge tag 'fscache-fixes-
20230130' of git://git./linux/kernel/git/dhowells/linux-fs
Pull fscache fixes from David Howells:
"Fix two problems in fscache volume handling:
- wake_up_bit() is incorrectly paired with wait_var_event(). The
latter selects the waitqueue to use differently.
- Missing barriers ordering between state bit and task state"
* tag 'fscache-fixes-
20230130' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
fscache: Use clear_and_wake_up_bit() in fscache_create_volume_work()
fscache: Use wait_on_bit() to wait for the freeing of relinquished volume
Arnd Bergmann [Mon, 30 Jan 2023 16:44:27 +0000 (17:44 +0100)]
Merge tag 'imx-fixes-6.2-2' of git://git./linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.2, round 2:
- Update MAINTAINERS i.MX entry to match arm64 freescale DTS.
- Drop misused 'uart-has-rtscts' from imx8m-venice boards.
- Fix USB host over-current polarity for imx7d-smegw01 board.
- Fix a typo in i.MX8DXL sc_pwrkey property name.
- Fix GPIO watchdog property for i.MX8MM eDM SBC board.
- Keep Ethernet PHY powered on imx8mm-verdin to avoid kernel crash.
- Fix configuration of i.MX8MM pad UART1_DTE_RX.
* tag 'imx-fixes-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx7d-smegw01: Fix USB host over-current polarity
arm64: dts: imx8mm-verdin: Do not power down eth-phy
MAINTAINERS: match freescale ARM64 DT directory in i.MX entry
arm64: dts: imx8mm: Fix pad control for UART1_DTE_RX
arm64: dts: freescale: imx8dxl: fix sc_pwrkey's property name linux,keycode
arm64: dts: imx8m-venice: Remove incorrect 'uart-has-rtscts'
arm64: dts: imx8mm: Reinstate GPIO watchdog always-running property on eDM SBC
Link: https://lore.kernel.org/r/20230130003614.GP20713@T480
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 30 Jan 2023 16:43:41 +0000 (17:43 +0100)]
Merge tag 'sunxi-fixes-for-6.2-1' of https://git./linux/kernel/git/sunxi/linux into arm/fixes
- Fix error handling in RSB init
* tag 'sunxi-fixes-for-6.2-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
bus: sunxi-rsb: Fix error handling in sunxi_rsb_init()
Link: https://lore.kernel.org/r/Y9RWcDdO0nj98KVj@jernej-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Krzysztof Kozlowski [Fri, 27 Jan 2023 10:59:35 +0000 (11:59 +0100)]
MAINTAINERS: amd: drop inactive Brijesh Singh
Emails to Brijesh Singh bounce ("550 5.1.10
RESOLVER.ADR.RecipientNotFound; Recipient not found by SMTP address
lookup").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230127105935.99174-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Alexander Egorenkov [Fri, 27 Jan 2023 13:52:42 +0000 (14:52 +0100)]
watchdog: diag288_wdt: fix __diag288() inline assembly
The DIAG 288 statement consumes an EBCDIC string the address of which is
passed in a register. Use a "memory" clobber to tell the compiler that
memory is accessed within the inline assembly.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Alexander Egorenkov [Fri, 27 Jan 2023 13:52:41 +0000 (14:52 +0100)]
watchdog: diag288_wdt: do not use stack buffers for hardware data
With CONFIG_VMAP_STACK=y the stack is allocated from the vmalloc space.
Data passed to a hardware or a hypervisor interface that
requires V=R can no longer be allocated on the stack.
Use kmalloc() to get memory for a diag288 command.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Hans de Goede [Fri, 27 Jan 2023 23:57:23 +0000 (00:57 +0100)]
platform/x86: thinkpad_acpi: Fix thinklight LED brightness returning 255
Reading the thinklight LED brightnes while the LED is on returns
255 (LED_FULL) but we advertise a max_brightness of 1, so this should
be 1 (LED_ON).
Fixes:
db5e2a4ca0a7 ("platform/x86: thinkpad_acpi: Fix max_brightness of thinklight")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230127235723.412864-1-hdegoede@redhat.com
Arnd Bergmann [Fri, 27 Jan 2023 09:39:44 +0000 (10:39 +0100)]
platform/x86/amd: pmc: add CONFIG_SERIO dependency
Using the serio subsystem now requires the code to be reachable:
x86_64-linux-ld: drivers/platform/x86/amd/pmc.o: in function `amd_pmc_suspend_handler':
pmc.c:(.text+0x86c): undefined reference to `serio_bus'
Add the usual dependency: as other users of serio use 'select'
rather than 'depends on', use the same here.
Fixes:
8e60615e8932 ("platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230127093950.2368575-1-arnd@kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Mon, 30 Jan 2023 13:25:54 +0000 (14:25 +0100)]
platform/x86/amd/pmf: Ensure mutexes are initialized before use
As soon as the first handler or sysfs file is registered
the mutex may get used.
Move the initialization to before any handler registration /
sysfs file creation.
Likewise move the destruction of the mutex to after all
the de-initialization is done.
Fixes:
da5ce22df5fe ("platform/x86/amd/pmf: Add support for PMF core layer")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230130132554.696025-1-hdegoede@redhat.com
Shyam Sundar S K [Wed, 25 Jan 2023 09:59:36 +0000 (15:29 +0530)]
platform/x86/amd/pmf: Fix to update SPS thermals when power supply change
Every power mode of static power slider has its own AC and DC power
settings.
When the power source changes from AC to DC, corresponding DC thermals
were not updated from PMF config store and this leads the system to always
run on AC power settings.
Fix it by registering with power_supply notifier and apply DC settings
upon getting notified by the power_supply handler.
Fixes:
da5ce22df5fe ("platform/x86/amd/pmf: Add support for PMF core layer")
Suggested-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230125095936.3292883-6-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Shyam Sundar S K [Wed, 25 Jan 2023 09:59:35 +0000 (15:29 +0530)]
platform/x86/amd/pmf: Fix to update SPS default pprof thermals
By design PMF static slider will be set to BALANCED during
init, but updating to corresponding thermal values from
the PMF config store was missed, leading to improper settings
getting propagated to PMFW.
Fixes:
4c71ae414474 ("platform/x86/amd/pmf: Add support SPS PMF feature")
Suggested-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230125095936.3292883-5-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Shyam Sundar S K [Wed, 25 Jan 2023 09:59:34 +0000 (15:29 +0530)]
platform/x86/amd/pmf: update to auto-mode limits only after AMT event
Auto-mode thermal limits should be updated only after receiving the AMT
event. But due to a bug in the older commit, these settings were getting
applied during the auto-mode init.
Fix this by removing amd_pmf_set_automode() during auto-mode
initialization.
Fixes:
3f5571d99524 ("platform/x86/amd/pmf: Add support for Auto mode feature")
Suggested-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230125095936.3292883-4-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Shyam Sundar S K [Wed, 25 Jan 2023 09:59:33 +0000 (15:29 +0530)]
platform/x86/amd/pmf: Add helper routine to check pprof is balanced
Add helper routine to check if the current platform profile
is balanced mode and remove duplicate code occurrences.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230125095936.3292883-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Shyam Sundar S K [Wed, 25 Jan 2023 09:59:32 +0000 (15:29 +0530)]
platform/x86/amd/pmf: Add helper routine to update SPS thermals
Add helper routine to update the static slider information
and remove the duplicate code occurrences after this change.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230125095936.3292883-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hou Tao [Fri, 13 Jan 2023 11:52:11 +0000 (19:52 +0800)]
fscache: Use clear_and_wake_up_bit() in fscache_create_volume_work()
fscache_create_volume_work() uses wake_up_bit() to wake up the processes
which are waiting for the completion of volume creation. According to
comments in wake_up_bit() and waitqueue_active(), an extra smp_mb() is
needed to guarantee the memory order between FSCACHE_VOLUME_CREATING
flag and waitqueue_active() before invoking wake_up_bit().
Fixing it by using clear_and_wake_up_bit() to add the missing memory
barrier.
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20230113115211.2895845-3-houtao@huaweicloud.com/
Hou Tao [Fri, 13 Jan 2023 11:52:10 +0000 (19:52 +0800)]
fscache: Use wait_on_bit() to wait for the freeing of relinquished volume
The freeing of relinquished volume will wake up the pending volume
acquisition by using wake_up_bit(), however it is mismatched with
wait_var_event() used in fscache_wait_on_volume_collision() and it will
never wake up the waiter in the wait-queue because these two functions
operate on different wait-queues.
According to the implementation in fscache_wait_on_volume_collision(),
if the wake-up of pending acquisition is delayed longer than 20 seconds
(e.g., due to the delay of on-demand fd closing), the first
wait_var_event_timeout() will timeout and the following wait_var_event()
will hang forever as shown below:
FS-Cache: Potential volume collision new=
00000024 old=
00000022
......
INFO: task mount:1148 blocked for more than 122 seconds.
Not tainted 6.1.0-rc6+ #1
task:mount state:D stack:0 pid:1148 ppid:1
Call Trace:
<TASK>
__schedule+0x2f6/0xb80
schedule+0x67/0xe0
fscache_wait_on_volume_collision.cold+0x80/0x82
__fscache_acquire_volume+0x40d/0x4e0
erofs_fscache_register_volume+0x51/0xe0 [erofs]
erofs_fscache_register_fs+0x19c/0x240 [erofs]
erofs_fc_fill_super+0x746/0xaf0 [erofs]
vfs_get_super+0x7d/0x100
get_tree_nodev+0x16/0x20
erofs_fc_get_tree+0x20/0x30 [erofs]
vfs_get_tree+0x24/0xb0
path_mount+0x2fa/0xa90
do_mount+0x7c/0xa0
__x64_sys_mount+0x8b/0xe0
do_syscall_64+0x30/0x60
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Considering that wake_up_bit() is more selective, so fix it by using
wait_on_bit() instead of wait_var_event() to wait for the freeing of
relinquished volume. In addition because waitqueue_active() is used in
wake_up_bit() and clear_bit() doesn't imply any memory barrier, use
clear_and_wake_up_bit() to add the missing memory barrier between
cursor->flags and waitqueue_active().
Fixes:
62ab63352350 ("fscache: Implement volume registration")
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20230113115211.2895845-2-houtao@huaweicloud.com/
Colin Foster [Fri, 27 Jan 2023 17:14:27 +0000 (09:14 -0800)]
net: phy: fix null dereference in phy_attach_direct
Commit
bc66fa87d4fd ("net: phy: Add link between phy dev and mac dev")
introduced a link between net devices and phy devices. It fails to check
whether dev is NULL, leading to a NULL dereference error.
Fixes:
bc66fa87d4fd ("net: phy: Add link between phy dev and mac dev")
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hyunwoo Kim [Fri, 27 Jan 2023 02:32:50 +0000 (18:32 -0800)]
netrom: Fix use-after-free caused by accept on already connected socket
If you call listen() and accept() on an already connect()ed
AF_NETROM socket, accept() can successfully connect.
This is because when the peer socket sends data to sendmsg,
the skb with its own sk stored in the connected socket's
sk->sk_receive_queue is connected, and nr_accept() dequeues
the skb waiting in the sk->sk_receive_queue.
As a result, nr_accept() allocates and returns a sock with
the sk of the parent AF_NETROM socket.
And here use-after-free can happen through complex race conditions:
```
cpu0 cpu1
1. socket_2 = socket(AF_NETROM)
.
.
listen(socket_2)
accepted_socket = accept(socket_2)
2. socket_1 = socket(AF_NETROM)
nr_create() // sk refcount : 1
connect(socket_1)
3. write(accepted_socket)
nr_sendmsg()
nr_output()
nr_kick()
nr_send_iframe()
nr_transmit_buffer()
nr_route_frame()
nr_loopback_queue()
nr_loopback_timer()
nr_rx_frame()
nr_process_rx_frame(sk, skb); // sk : socket_1's sk
nr_state3_machine()
nr_queue_rx_frame()
sock_queue_rcv_skb()
sock_queue_rcv_skb_reason()
__sock_queue_rcv_skb()
__skb_queue_tail(list, skb); // list : socket_1's sk->sk_receive_queue
4. listen(socket_1)
nr_listen()
uaf_socket = accept(socket_1)
nr_accept()
skb_dequeue(&sk->sk_receive_queue);
5. close(accepted_socket)
nr_release()
nr_write_internal(sk, NR_DISCREQ)
nr_transmit_buffer() // NR_DISCREQ
nr_route_frame()
nr_loopback_queue()
nr_loopback_timer()
nr_rx_frame() // sk : socket_1's sk
nr_process_rx_frame() // NR_STATE_3
nr_state3_machine() // NR_DISCREQ
nr_disconnect()
nr_sk(sk)->state = NR_STATE_0;
6. close(socket_1) // sk refcount : 3
nr_release() // NR_STATE_0
sock_put(sk); // sk refcount : 0
sk_free(sk);
close(uaf_socket)
nr_release()
sock_hold(sk); // UAF
```
KASAN report by syzbot:
```
BUG: KASAN: use-after-free in nr_release+0x66/0x460 net/netrom/af_netrom.c:520
Write of size 4 at addr
ffff8880235d8080 by task syz-executor564/5128
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:306 [inline]
print_report+0x15e/0x461 mm/kasan/report.c:417
kasan_report+0xbf/0x1f0 mm/kasan/report.c:517
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0x141/0x190 mm/kasan/generic.c:189
instrument_atomic_read_write include/linux/instrumented.h:102 [inline]
atomic_fetch_add_relaxed include/linux/atomic/atomic-instrumented.h:116 [inline]
__refcount_add include/linux/refcount.h:193 [inline]
__refcount_inc include/linux/refcount.h:250 [inline]
refcount_inc include/linux/refcount.h:267 [inline]
sock_hold include/net/sock.h:775 [inline]
nr_release+0x66/0x460 net/netrom/af_netrom.c:520
__sock_release+0xcd/0x280 net/socket.c:650
sock_close+0x1c/0x20 net/socket.c:1365
__fput+0x27c/0xa90 fs/file_table.c:320
task_work_run+0x16f/0x270 kernel/task_work.c:179
exit_task_work include/linux/task_work.h:38 [inline]
do_exit+0xaa8/0x2950 kernel/exit.c:867
do_group_exit+0xd4/0x2a0 kernel/exit.c:1012
get_signal+0x21c3/0x2450 kernel/signal.c:2859
arch_do_signal_or_restart+0x79/0x5c0 arch/x86/kernel/signal.c:306
exit_to_user_mode_loop kernel/entry/common.c:168 [inline]
exit_to_user_mode_prepare+0x15f/0x250 kernel/entry/common.c:203
__syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296
do_syscall_64+0x46/0xb0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f6c19e3c9b9
Code: Unable to access opcode bytes at 0x7f6c19e3c98f.
RSP: 002b:
00007fffd4ba2ce8 EFLAGS:
00000246 ORIG_RAX:
0000000000000133
RAX:
0000000000000116 RBX:
0000000000000003 RCX:
00007f6c19e3c9b9
RDX:
0000000000000318 RSI:
00000000200bd000 RDI:
0000000000000006
RBP:
0000000000000003 R08:
000000000000000d R09:
000000000000000d
R10:
0000000000000000 R11:
0000000000000246 R12:
000055555566a2c0
R13:
0000000000000011 R14:
0000000000000000 R15:
0000000000000000
</TASK>
Allocated by task 5128:
kasan_save_stack+0x22/0x40 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
____kasan_kmalloc mm/kasan/common.c:371 [inline]
____kasan_kmalloc mm/kasan/common.c:330 [inline]
__kasan_kmalloc+0xa3/0xb0 mm/kasan/common.c:380
kasan_kmalloc include/linux/kasan.h:211 [inline]
__do_kmalloc_node mm/slab_common.c:968 [inline]
__kmalloc+0x5a/0xd0 mm/slab_common.c:981
kmalloc include/linux/slab.h:584 [inline]
sk_prot_alloc+0x140/0x290 net/core/sock.c:2038
sk_alloc+0x3a/0x7a0 net/core/sock.c:2091
nr_create+0xb6/0x5f0 net/netrom/af_netrom.c:433
__sock_create+0x359/0x790 net/socket.c:1515
sock_create net/socket.c:1566 [inline]
__sys_socket_create net/socket.c:1603 [inline]
__sys_socket_create net/socket.c:1588 [inline]
__sys_socket+0x133/0x250 net/socket.c:1636
__do_sys_socket net/socket.c:1649 [inline]
__se_sys_socket net/socket.c:1647 [inline]
__x64_sys_socket+0x73/0xb0 net/socket.c:1647
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 5128:
kasan_save_stack+0x22/0x40 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:518
____kasan_slab_free mm/kasan/common.c:236 [inline]
____kasan_slab_free+0x13b/0x1a0 mm/kasan/common.c:200
kasan_slab_free include/linux/kasan.h:177 [inline]
__cache_free mm/slab.c:3394 [inline]
__do_kmem_cache_free mm/slab.c:3580 [inline]
__kmem_cache_free+0xcd/0x3b0 mm/slab.c:3587
sk_prot_free net/core/sock.c:2074 [inline]
__sk_destruct+0x5df/0x750 net/core/sock.c:2166
sk_destruct net/core/sock.c:2181 [inline]
__sk_free+0x175/0x460 net/core/sock.c:2192
sk_free+0x7c/0xa0 net/core/sock.c:2203
sock_put include/net/sock.h:1991 [inline]
nr_release+0x39e/0x460 net/netrom/af_netrom.c:554
__sock_release+0xcd/0x280 net/socket.c:650
sock_close+0x1c/0x20 net/socket.c:1365
__fput+0x27c/0xa90 fs/file_table.c:320
task_work_run+0x16f/0x270 kernel/task_work.c:179
exit_task_work include/linux/task_work.h:38 [inline]
do_exit+0xaa8/0x2950 kernel/exit.c:867
do_group_exit+0xd4/0x2a0 kernel/exit.c:1012
get_signal+0x21c3/0x2450 kernel/signal.c:2859
arch_do_signal_or_restart+0x79/0x5c0 arch/x86/kernel/signal.c:306
exit_to_user_mode_loop kernel/entry/common.c:168 [inline]
exit_to_user_mode_prepare+0x15f/0x250 kernel/entry/common.c:203
__syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296
do_syscall_64+0x46/0xb0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x63/0xcd
```
To fix this issue, nr_listen() returns -EINVAL for sockets that
successfully nr_connect().
Reported-by: syzbot+caa188bdfc1eeafeb418@syzkaller.appspotmail.com
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrey Konovalov [Thu, 26 Jan 2023 21:35:39 +0000 (00:35 +0300)]
net: stmmac: do not stop RX_CLK in Rx LPI state for qcs404 SoC
Currently in phy_init_eee() the driver unconditionally configures the PHY
to stop RX_CLK after entering Rx LPI state. This causes an LPI interrupt
storm on my qcs404-base board.
Change the PHY initialization so that for "qcom,qcs404-ethqos" compatible
device RX_CLK continues to run even in Rx LPI state.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 29 Jan 2023 21:59:43 +0000 (13:59 -0800)]
Linux 6.2-rc6
projects / platform / kernel / linux-rpi.git / log