Miguel París Díaz [Tue, 4 Nov 2014 14:00:52 +0000 (15:00 +0100)]
rtpjitterbuffer: Fix expected_dts calc in calculate_expected
Right above we consider lost_packet packets, each of them having duration,
as lost and triggered their timers immediately. Below we use expected_dts
to schedule retransmission or schedule lost timers for the packets that
come after expected_dts.
As we just triggered lost_packets packets as lost, there's no point in
scheduling new timers for them and we can just skip over all lost packets.
https://bugzilla.gnome.org/show_bug.cgi?id=739868
Sebastian Dröge [Fri, 20 Mar 2015 17:21:57 +0000 (18:21 +0100)]
rtpjitterbuffer: Make the next output buffer discont after resetting the jitterbuffer
Resetting the jitterbuffer drops all packets and other things, and will cause
a discontinuity in the packets received by the depayloaders. They should now
also flush anything they had pending as the new data will start at a different
position.
https://bugzilla.gnome.org/show_bug.cgi?id=739868
Hyunjun Ko [Fri, 10 Apr 2015 00:17:26 +0000 (09:17 +0900)]
qtdemux: Update segment.start after key-unit seek
When doing key uint seek, qtdemux calls gst_qtdemux_adjust_seek
to get proper offset. And then this offset is set to
segment.position and segment.time in gst_qtdemux_perform_seek but
segment.start is not updated.
After that, application sends segment query,
qtdemux sets start and stop to query using gst_segment_to_stream_time. Due
to the wrong value in segment.start, the stop position is smaller than
it should.
https://bugzilla.gnome.org/show_bug.cgi?id=746822
Thiago Santos [Tue, 7 Apr 2015 19:12:40 +0000 (16:12 -0300)]
qtmux: remove useless variable do_pts
We always write the CTTS in qtmux. Ideally we only want to do that
for streams that need DTS, it should be present on the track information
rather than be decided based on each buffer
Thiago Santos [Tue, 7 Apr 2015 03:53:35 +0000 (00:53 -0300)]
qtmux: remove subtraction that makes PTS/DTS start from 0
As qt uses durations, it doesn't matter, only the difference
between consecutive buffers is important. Also, collectpads
already replaces PTS/DTS with the running times for them.
Thiago Santos [Tue, 7 Apr 2015 01:36:43 +0000 (22:36 -0300)]
tests: qtmux: add tests to verify it handles non-0 segments
Both input streams in this test have a segment.start = 10s, so
output should start from 0 anyway.
Another test has both starting at non-0 segments, but the running
time of both streams should still start from 0
Thiago Santos [Mon, 6 Apr 2015 23:03:19 +0000 (20:03 -0300)]
tests: qtmux: simple muxing test
Adds a new simple test that verifies that data is properly muxed
and preserved. PTS, DTS, duration and caps are verified.
Ravi Kiran K N [Fri, 10 Apr 2015 05:29:26 +0000 (10:59 +0530)]
smpte: remove unused fields
Remove the fields - format and fps from smpte
as they are unused.
https://bugzilla.gnome.org/show_bug.cgi?id=747597
Ravi Kiran K N [Fri, 10 Apr 2015 04:59:47 +0000 (10:29 +0530)]
tests: add test suite for alpha
Added test suite for alpha element with test cases
1. alpha
2. chroma keying
https://bugzilla.gnome.org/show_bug.cgi?id=747595
Vincent Penquerc'h [Thu, 9 Apr 2015 11:58:46 +0000 (12:58 +0100)]
suppressions: add a well known zlib inflate bug
Vincent Penquerc'h [Thu, 9 Apr 2015 11:58:26 +0000 (12:58 +0100)]
splitmuxsink: fix mutex leak
Jan Schmidt [Thu, 9 Apr 2015 02:58:04 +0000 (12:58 +1000)]
tests: Fix rtprtx test by handling buffer lists
Commit #1018aa made rtprtxsend handle buffer lists, breaking
the test which probes for buffers, but not buffer lists.
Use a utility function to run the probe callback on each buffer
in the list in turn and remove any buffers that are dropped.
Jan Schmidt [Wed, 1 Apr 2015 00:15:38 +0000 (11:15 +1100)]
isomp4: Refactor various state variables into a mux_mode var
Instead of checking various state variables around the muxer,
track the current muxing mode in a single 'mux_mode' enum.
Add some implementation notes about the different mux modes
Edward Hervey [Wed, 8 Apr 2015 14:40:02 +0000 (16:40 +0200)]
tests: Use AM_TESTS_ENVIRONMENT
Needed by the new automake test runner
Edward Hervey [Wed, 8 Apr 2015 09:17:31 +0000 (11:17 +0200)]
rtph263depay: Fix framesize parsing
The string passed to the parsing function only contains a framesize, and
not <pt> + <framesize>
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=726416
Vincent Penquerc'h [Fri, 20 Mar 2015 12:18:37 +0000 (12:18 +0000)]
wavparse: clip chunk size above the valid maximum (0x7fffffff)
https://bugzilla.gnome.org/show_bug.cgi?id=722567
Vincent Penquerc'h [Fri, 20 Mar 2015 09:07:35 +0000 (09:07 +0000)]
wavparse: clip chunk length to available data (when known)
This prevents silly chunk lengths from possibly overflowing
(at least when we know the actual data length).
https://bugzilla.gnome.org/show_bug.cgi?id=722567
Sebastian Dröge [Tue, 7 Apr 2015 03:17:52 +0000 (20:17 -0700)]
qtdemux: Don't accumulate segment bases manually
gst_segment_do_seek() does that for us already, and doing it twice
will break non-flushing seeks in interesting ways. Leftover from 1.0
porting.
Also copy over segment offset and applied_rate, just in case.
Sebastian Dröge [Tue, 7 Apr 2015 02:08:10 +0000 (19:08 -0700)]
icles: Fix waiting for segment-done if it happens too fast
Sometimes we can get segment-done before we got async-done. If we waited
for async-done only, the segment-done would be dropped and we would wait
forever for it a few lines below.
Thiago Santos [Mon, 6 Apr 2015 21:55:08 +0000 (18:55 -0300)]
qtdemux: stbl_index is valid from 0 onwards
It indicates the last sample parsed, not the next one to parse.
As it starts in -1, any value from 0 onwards means that it has
some valid data.
Tim-Philipp Müller [Sun, 5 Apr 2015 19:06:09 +0000 (20:06 +0100)]
docs: make GstRTCPSync enum show up in rtpbin docs
https://bugzilla.gnome.org/show_bug.cgi?id=747358
Tim-Philipp Müller [Sun, 5 Apr 2015 10:45:45 +0000 (11:45 +0100)]
docs: add RTPJitterBufferMode enum to rtpbin docs
https://bugzilla.gnome.org/show_bug.cgi?id=747358
Thiago Santos [Sat, 4 Apr 2015 14:55:00 +0000 (11:55 -0300)]
multifilesink: close files before posting message
Makes sure the files were properly flushed and closed before
the message reaches the application
Thiago Santos [Mon, 30 Mar 2015 16:54:23 +0000 (13:54 -0300)]
tests: multifile: increment tests to check for multifile messages
Also verify that the multifilesink file messages are being correctly
posted to the bus
Thiago Santos [Mon, 30 Mar 2015 15:51:35 +0000 (12:51 -0300)]
tests: multifile: handle FIXME for proper checking when test finished
Use a GstBus and wait for EOS to finish the tests instead of
relying on sleeping
Thiago Santos [Mon, 30 Mar 2015 14:14:09 +0000 (11:14 -0300)]
multifilesink: post file message on EOS
When multifilesink is operating in any mode other than one file
per buffer, the last file created won't have a file message posted
as multifilesink doesn't handle the EOS event.
This patch fixes it by using the last position to post a file
message when EOS is received. This should ensure at least the
time related data and the filename are posted to the application
or other elements
https://bugzilla.gnome.org/show_bug.cgi?id=747000
Tim-Philipp Müller [Fri, 3 Apr 2015 17:57:50 +0000 (18:57 +0100)]
Automatic update of common submodule
From bc76a8b to c8fb372
Jan Schmidt [Thu, 2 Apr 2015 15:08:50 +0000 (02:08 +1100)]
qtdemux: Guard against 64-bit overflow
For large-file atoms, guard against overflow in the size field,
which could make us jump backward in the file and cause
infinite loops.
Jan Schmidt [Wed, 1 Apr 2015 12:46:13 +0000 (23:46 +1100)]
isomp4: Make non-seekable downstream an error in normal mode
When not in fast-start or fragmented mode, we need to be able
to rewrite the size of the mdat atom, or else the output just
won't be playable - the mdat placeholder with size == 0 will
cover the rest of the file, including any moov atom we write out.
https://bugzilla.gnome.org/show_bug.cgi?id=708808
Sebastian Rasmussen [Sat, 15 Mar 2014 14:23:01 +0000 (15:23 +0100)]
rtph263pay/-depay: add framesize SDP attribute
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=726416
Sebastian Rasmussen [Sat, 15 Mar 2014 12:33:56 +0000 (13:33 +0100)]
rtpjpegpay/-depay: Remove incorrectly introduced framesize SDP attribute
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=726415
Peter Seiderer [Fri, 27 Mar 2015 20:09:44 +0000 (21:09 +0100)]
v4l2src: device sequence/offset correction in case of renegotiation
The v4l2 device restarts the sequence counter in case of streamoff/streamon,
the GST offset values are supposed to increment strictly monotonic, so
adjust the sequence counter/offset values in case of caps
renegotiation.
https://bugzilla.gnome.org/show_bug.cgi?id=745441
Peter Seiderer [Fri, 14 Nov 2014 13:18:51 +0000 (14:18 +0100)]
v4l2src: add frame loss detection
In case of v4l2 driver filled offset/sequence values add frame
loss detection (and write a warning message).
Move offset meta data setting and frame loss checking after the
timestamp adjustment code to get proper timestamps for the
warning message.
https://bugzilla.gnome.org/show_bug.cgi?id=745441
Peter Seiderer [Fri, 14 Nov 2014 12:48:51 +0000 (13:48 +0100)]
v4l2: use v4l2 capture device sequence counter
Use the v4l2 capture device sequence counter for
setting the GstBuffer offset/offset_end values.
https://bugzilla.gnome.org/show_bug.cgi?id=745441
Tobias Modschiedler [Mon, 30 Mar 2015 11:12:35 +0000 (13:12 +0200)]
v4l2: Ask the driver about its requirements for min_buffers before initiating buffer pool.
If propose_allocation() had not been called yet, it was possible that the driver was not asked at all.
In buffer pool: Consider minimum number of buffers requested by driver when setting config.
https://bugzilla.gnome.org/show_bug.cgi?id=746834
Olivier Crête [Wed, 1 Apr 2015 23:30:27 +0000 (19:30 -0400)]
rtpvp8depay: Parse width/height/profile from keyframes
This makes it possible to mux the result into a container
such as matroska.
https://bugzilla.gnome.org/show_bug.cgi?id=747208
Olivier Crête [Wed, 1 Apr 2015 23:01:49 +0000 (19:01 -0400)]
vp8enc: Expose VP8 width/height limitations in the caps template
The VP8 format specification (RFC 6386 section 18.1) specifies
that the maximum size is 16383x16383.
Jan Schmidt [Mon, 30 Mar 2015 13:20:13 +0000 (00:20 +1100)]
flv: When passing seek event upstream, hold a ref.
In case upstream can't handle the seek, make sure we
keep a ref on the event to attempt to handle it ourselves.
Guillaume Desmottes [Thu, 26 Mar 2015 12:34:53 +0000 (13:34 +0100)]
matroska: fix GValue leaks when parsing tags
gst_tag_list_add_value() doesn't consume the GValue we pass to it so there is
no point copying it.
https://bugzilla.gnome.org/show_bug.cgi?id=746810
Mark Nauwelaerts [Mon, 23 Mar 2015 19:58:25 +0000 (20:58 +0100)]
qtdemux: resurrect some flow return handling
https://bugzilla.gnome.org/show_bug.cgi?id=744572
Mark Nauwelaerts [Mon, 23 Mar 2015 19:57:56 +0000 (20:57 +0100)]
flvdemux: resurrect some flow return handling
https://bugzilla.gnome.org/show_bug.cgi?id=744572
Mark Nauwelaerts [Mon, 23 Mar 2015 19:56:41 +0000 (20:56 +0100)]
matroskademux: resurrect some flow return handling
https://bugzilla.gnome.org/show_bug.cgi?id=744572
Thiago Santos [Fri, 27 Mar 2015 21:58:31 +0000 (18:58 -0300)]
matroska: store stream tags and push as updated
New tags can be found on different parts of the file, so this patch
keeps the stream taglists around for the life cycle of the pad
and adds those new tags as found. Then a new tag is found, the
pad's is marked with a tags changed flag, making the element push
a new tag event on the next check. Before this, we were sending
only the newly found tags, as the element was losing its taglist
when pushing the event.
Ramiro Polla [Sun, 15 Mar 2015 13:40:36 +0000 (14:40 +0100)]
matroskademux: send global tags incrementally
Instead of sending only new tags once they are found, merge the taglist
and send them incrementally.
Ramiro Polla [Sat, 14 Mar 2015 16:07:05 +0000 (17:07 +0100)]
matroskaparse: send global tags
Global tags are already being read in matroskaparse, but they are not
currently being sent.
This patch makes global tags get sent incrementally whenever new ones
are found.
https://bugzilla.gnome.org/show_bug.cgi?id=746242
Vineeth T M [Tue, 3 Feb 2015 04:48:58 +0000 (10:18 +0530)]
quarktv: fix "planes" property range, a value of 0 is not allowed
When planes property is set to 0, the pipeline executes in
an infinite loop and never exits. Since planes must never
be 0, set the minimum value in the property description
to 1.
https://bugzilla.gnome.org/show_bug.cgi?id=743906
David Schleef [Thu, 26 Mar 2015 20:42:02 +0000 (13:42 -0700)]
wavparse: Fix up comments regarding DTS
Nicolas Dufresne [Wed, 25 Mar 2015 19:11:34 +0000 (15:11 -0400)]
rtspsrc: Fix segment in TCP mode
It is expected that buffers are time-stamped with running time. Set
a segment accordingly. In this case we pick 0,-1 as this is what udpsrc
would do. Depayloaders will update the segment to reflect the playback
position.
https://bugzilla.gnome.org/show_bug.cgi?id=635701
David Schleef [Thu, 26 Mar 2015 19:21:25 +0000 (12:21 -0700)]
wavparse: be more strict about typefinding DTS
Code now matches comments.
Nicolas Dufresne [Wed, 25 Mar 2015 19:10:53 +0000 (15:10 -0400)]
rtspsrc: Remove useless function
This function didn't do anything special, let's not use a function for
that.
Nicolas Dufresne [Fri, 20 Mar 2015 17:03:09 +0000 (13:03 -0400)]
rtpjitter: Account for rtx_retry in overflow check
As rtx_retry is part of the substraction, we need to take it into
account, otherwise we may endup with a big value.
Julien Isorce [Tue, 24 Mar 2015 23:15:15 +0000 (23:15 +0000)]
osxvideosink: check for deprecated constants prior to OSX 10.10
cocoawindow.m:339:5: error: 'NSOpenGLPFAWindow'
is deprecated: first deprecated in OS X 10.9
cocoawindow.m:576:7: error: 'NSOpenGLPFAFullScreen'
is deprecated: first deprecated in OS X 10.6
cocoawindow.m:605:24: error: 'setFullScreen'
is deprecated: first deprecated in OS X 10.7
Nicolas Dufresne [Tue, 24 Mar 2015 20:51:12 +0000 (16:51 -0400)]
rtspsrc: Fix seeking query
The segment start/stop in the query is meant to represent the seekable
portion of the stream. It does not match the segment start/stop. Instead
export 0 to duration.
Sebastian Dröge [Tue, 24 Mar 2015 15:18:53 +0000 (16:18 +0100)]
flvdemux: Only set caps once if they don't change
Previously we were setting new caps with the same content for every H264 or
AAC codec_data we found in the stream, spamming everything and causing
renegotiations.
Sebastian Dröge [Tue, 24 Mar 2015 11:46:19 +0000 (12:46 +0100)]
flvdemux: Don't create AAC/H264 caps without codec_data
Instead delay creating the caps until we read the codec_data from the stream,
or fail if we get normal data before the codec_data.
AAC raw caps and H264 avc caps always need codec_data, setting caps on the pad
without them is going to make negotiation fail most of the time. Even if we
later set new caps with the codec_data, that's usually going to be too late.
https://bugzilla.gnome.org/show_bug.cgi?id=746682
Sebastian Dröge [Tue, 24 Mar 2015 14:39:22 +0000 (15:39 +0100)]
flvdemux: Fix indention
Ilya Konstantinov [Sun, 22 Mar 2015 11:23:44 +0000 (13:23 +0200)]
osxaudio: Fix string format warning on 32-bit
UInt32 (Darwin, not C99's uint32_t) is 'unsigned long' on 32-bit
platforms.
Sebastian Dröge [Sat, 21 Mar 2015 16:50:40 +0000 (17:50 +0100)]
rtpsession: Fix another instance of sticky event misordering warnings
Make sure that the sync_src pad has caps before the segment event.
Otherwise we might get a segment event before caps from the receive
RTCP pad, and then later when receiving RTCP packets will set caps.
This will results in a sticky event misordering warning
This fixes warnings in the rtpaux unit test but also in the
rtpaux and rtx examples in tests/examples/rtp
https://bugzilla.gnome.org/show_bug.cgi?id=746445
Sebastian Dröge [Sat, 21 Mar 2015 16:18:47 +0000 (17:18 +0100)]
rtpsession: Also start the RTCP send thread when receiving RTP or RTCP
Before we only started it when either:
- there is no send RTP stream
or
- we received an RTP packet for sending
This could mean that if the send RTP pads are connected but never receive any
RTP data, and the same session is also used for receiving RTP/RTCP, we would
never start the RTCP thread and would never send RTCP for the receiving part
of the session.
This can be reproduced with a pipeline like:
gst-launch-1.0 rtpbin name=rtpbin \
udpsrc port=5000 ! "application/x-rtp, media=video, clock-rate=90000, encoding-name=H264" ! rtpbin.recv_rtp_sink_0 \
udpsrc port=5001 ! rtpbin.recv_rtcp_sink_0 \
rtpbin.send_rtcp_src_0 ! fakesink name=rtcp_fakesink silent=false async=false sync=false \
rtpbin.recv_rtp_src_0_2553225531_96 ! decodebin ! xvimagesink \
fakesrc ! valve drop=true ! rtpbin.send_rtp_sink_0 \
rtpbin.send_rtp_src_0 ! fakesink name=rtp_fakesink silent=false async=false sync=false -v
Before this change the rtcp_fakesink would never send RTCP for the receiving
part of the session (i.e. no receiver reports!), after the change it does.
And before and after this change it would send RTCP for the receiving part of
the session if the sender part was omitted (the last two lines).
Sebastian Dröge [Thu, 19 Mar 2015 10:54:12 +0000 (11:54 +0100)]
rtprtxsend: Add support for buffer lists
Sebastian Dröge [Thu, 19 Mar 2015 10:39:38 +0000 (11:39 +0100)]
rtprtxqueue: Implement support for buffer lists
Nicolas Dufresne [Wed, 18 Mar 2015 21:32:36 +0000 (17:32 -0400)]
rtspsrc: Improve trace readability
Change the command number into strings.
Jan Alexander Steffens (heftig) [Tue, 20 Jan 2015 09:18:56 +0000 (10:18 +0100)]
flvdemux: Don't repeatedly warn after no_more_pads (v2)
This can get rather spammy for such a high log level.
Only warn once per stream.
https://bugzilla.gnome.org/show_bug.cgi?id=746274
Jan Alexander Steffens (heftig) [Mon, 16 Mar 2015 10:23:52 +0000 (11:23 +0100)]
flvdemux: Introduce constant for no-more-pads threshold
https://bugzilla.gnome.org/show_bug.cgi?id=746274
Jan Alexander Steffens (heftig) [Tue, 20 Jan 2015 09:18:29 +0000 (10:18 +0100)]
flvdemux: Fix warning to contain 'video'
https://bugzilla.gnome.org/show_bug.cgi?id=746274
Nicola Murino [Wed, 11 Mar 2015 20:25:40 +0000 (21:25 +0100)]
matroskademux: for dts only stream set pts=dts for intra only formats
https://bugzilla.gnome.org/show_bug.cgi?id=745192
Ramiro Polla [Sat, 14 Mar 2015 15:39:09 +0000 (16:39 +0100)]
matroskademux: fix sending of tags
* Fix critical when new tags are found after segment event has already
been sent.
* Send global tags before stream tags.
* Split sending of tags out of gst_matroska_demux_send_event() into its
own function.
https://bugzilla.gnome.org/show_bug.cgi?id=745973
Ramiro Polla [Fri, 13 Mar 2015 18:26:06 +0000 (18:26 +0000)]
rtspsrc: properly escape percent sign in documentation
Ramiro Polla [Fri, 13 Mar 2015 18:26:44 +0000 (18:26 +0000)]
rtpdtmfmux: properly escape percent sign in documentation
Thiago Santos [Fri, 13 Mar 2015 18:48:03 +0000 (18:48 +0000)]
v4l2src: delay renegotiation until it is likely buffers were reclaimed
Allow renegotiation to happen when buffers have returned after an allocation
query. As the allocation query is serialized, all buffers from the pool
should have returned and we can stop it to create a new one for the
new format
https://bugzilla.gnome.org/show_bug.cgi?id=682770
Thiago Santos [Fri, 13 Mar 2015 18:47:55 +0000 (18:47 +0000)]
v4l2object: add gst_v4l2_object_try_format
Similar to set_format but it uses TRY_FMT instead of S_FMT
https://bugzilla.gnome.org/show_bug.cgi?id=682770
Tim-Philipp Müller [Fri, 13 Mar 2015 18:38:42 +0000 (18:38 +0000)]
multiudpsink: fix crash with GST_DEBUG enabled
g_inet_socket_address_get_address() does not give
us a ref to the address, so don't unref it.
Sebastian Dröge [Thu, 12 Mar 2015 13:49:56 +0000 (13:49 +0000)]
level: Don't read over the end of the input memory
Previously we advanced the in_data pointer by bps for every channel, and then
later again for block_size*bps. This caused us to be one sample further than
expected if an input buffer covered two analysis frames. And in the end lead
to completely bogus values reported by level.
https://bugzilla.gnome.org/show_bug.cgi?id=746065
Jan Schmidt [Wed, 11 Mar 2015 14:37:08 +0000 (01:37 +1100)]
Remove a couple of superfluous trailing semi-colons
Tim-Philipp Müller [Tue, 10 Mar 2015 09:31:20 +0000 (09:31 +0000)]
Fix double semicolons
Jan Schmidt [Tue, 10 Mar 2015 04:46:40 +0000 (15:46 +1100)]
splitmux: Shut down element before downward state change
Make sure the state change won't hang trying to shut down pads
by making sure the streaming has stopped before chaining up.
Ilya Konstantinov [Mon, 9 Mar 2015 20:58:05 +0000 (22:58 +0200)]
osxaudio: stream format is an SPDIF-only field
Ilya Konstantinov [Mon, 9 Mar 2015 20:53:41 +0000 (22:53 +0200)]
osxaudio: fix spaces
Ilya Konstantinov [Mon, 9 Mar 2015 20:52:46 +0000 (22:52 +0200)]
osxaudio: add type check macro
Ilya Konstantinov [Mon, 9 Mar 2015 20:51:51 +0000 (22:51 +0200)]
osxaudio: rename gst_core_audio_set_channels_layout()
to gst_core_audio_get_channel_layout().
Ilya Konstantinov [Mon, 9 Mar 2015 20:30:28 +0000 (22:30 +0200)]
osxaudio: remove unused finalize
Luis de Bethencourt [Mon, 9 Mar 2015 16:25:43 +0000 (16:25 +0000)]
vp9enc: remove duplicate declaration of function
Luis de Bethencourt [Mon, 9 Mar 2015 16:22:29 +0000 (16:22 +0000)]
rtph264depay: remove unused value
CID #1226474
Luis de Bethencourt [Mon, 9 Mar 2015 16:14:34 +0000 (16:14 +0000)]
rtph263pay: fix leak
CID 1212156
Luis de Bethencourt [Mon, 9 Mar 2015 15:58:33 +0000 (15:58 +0000)]
rtph263pay: remove uneeded variable
We just need to save the ebit information in case there is an error decoding.
Sebastian Dröge [Mon, 9 Mar 2015 15:46:02 +0000 (16:46 +0100)]
vp[89]enc: Reset the encoder when flushing
https://bugzilla.gnome.org/show_bug.cgi?id=745704
Luis de Bethencourt [Mon, 9 Mar 2015 12:51:17 +0000 (12:51 +0000)]
matroska: error mode if can't push buffer
If gst_pad_push() fails, inform and return flow error.
Luis de Bethencourt [Mon, 9 Mar 2015 12:13:34 +0000 (12:13 +0000)]
matroska: unused value
Value set in ret will be overwritten just before exiting the function.
CID #1226469
Sebastian Dröge [Mon, 9 Mar 2015 10:10:35 +0000 (11:10 +0100)]
rtpjitterbuffer: Drop packets with sequence numbers before the seqnum-base
These are outside the expected range of sequence numbers and should be
clipped, especially for RTSP they might belong to packets from before a seek
or a previous stream in general.
Linus Svensson [Thu, 27 Feb 2014 09:52:16 +0000 (10:52 +0100)]
rtspsrc: Don't include payload type in the caps for framesize
When the sdp media attribute framesize are converted to caps
the <payload> should not be included.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=725335
Sebastian Dröge [Mon, 9 Mar 2015 09:05:14 +0000 (10:05 +0100)]
rtpjitterbuffer: Don't forget to unlock the mutex when receiving GAPs in TCP streams
Arun Raghavan [Mon, 9 Mar 2015 05:54:58 +0000 (11:24 +0530)]
pulsesink: Make sure to filter caps in all cases during CAPS query
We were skipping the filter step while returning template caps, for
example.
Nicolas Dufresne [Sun, 8 Mar 2015 21:15:53 +0000 (21:15 +0000)]
v4l2bufferpool: Don't update buffer for OUTPUT
For output device, we should not update the buffer with flags and
timestamp when we dequeue. The information in the v4l2_buffer is not
meaningful and it breaks the case where the buffer is rendered at
multiple places.
https://bugzilla.gnome.org/show_bug.cgi?id=745438
Sebastian Dröge [Sun, 8 Mar 2015 17:04:34 +0000 (18:04 +0100)]
souphttpclientsink: Implement cookies property
Sebastian Dröge [Sun, 8 Mar 2015 17:02:51 +0000 (18:02 +0100)]
souphttpclientsink: Implement automatic-redirect property
Sebastian Dröge [Sun, 8 Mar 2015 16:54:07 +0000 (17:54 +0100)]
souphttpclientsink: Implement proxy support
The properties were there before, but not used anywhere.
Mark Nauwelaerts [Sat, 21 Feb 2015 19:05:24 +0000 (20:05 +0100)]
avidemux: resurrect some flow return handling
Nicolas Huet [Wed, 4 Mar 2015 09:27:17 +0000 (10:27 +0100)]
aacparse: fix LOAS parsing issue
Fix missing index in syncword searching
https://bugzilla.gnome.org/show_bug.cgi?id=745585
Thiago Santos [Thu, 5 Mar 2015 20:54:43 +0000 (17:54 -0300)]
directsoundsink: fix modulo math with ringbuffer parameters
To get a multiple of bpf use a subtraction and not an addition
https://bugzilla.gnome.org/show_bug.cgi?id=745684
Jan Schmidt [Fri, 6 Mar 2015 13:55:47 +0000 (00:55 +1100)]
splitmuxsink: Protect property variables with the object lock.
Use the object lock instead of the splitmux lock to protect
internal property variables, so they're not locked when
switching to a new file.
https://bugzilla.gnome.org/show_bug.cgi?id=744420