crypto: hisilicon/qm - cleanup warning in qm_vf_read_qos

The kernel test rebot report this warning: Uninitialized variable: ret.
The code flow may return value of ret directly. This value is an
uninitialized variable, here is fix it.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon/sec - use the correct print format

Use the correct print format. Printing an unsigned int value should
use %u instead of %d.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon/sec - fix the CTR mode BD configuration

The CTR counter is 32bit rollover default on the BD.
But the NIST standard is 128bit rollover. it cause the
testing failed, so need to fix the BD configuration.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon/sec - fix the max length of AAD for the CCM mode

Fix the maximum length of AAD for the CCM mode due to the hardware limited.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon/sec - add some comments for soft fallback

Modify the print of information that might lead to user misunderstanding.
Currently only XTS mode need the fallback tfm when using 192bit key.
Others algs not need soft fallback tfm. So others algs can return
directly.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon/sec - fixup icv checking enabled on Kunpeng 930

Fixup icv(integrity check value) checking enabled wrong on
Kunpeng 930

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: octeontx2 - select CONFIG_NET_DEVLINK

OcteonTX2 CPT driver will fail to link without devlink support.

aarch64-linux-gnu-ld: otx2_cpt_devlink.o: in function `otx2_cpt_dl_egrp_delete':
otx2_cpt_devlink.c:18: undefined reference to `devlink_priv'
aarch64-linux-gnu-ld: otx2_cpt_devlink.o: in function `otx2_cpt_dl_egrp_create':
otx2_cpt_devlink.c:9: undefined reference to `devlink_priv'
aarch64-linux-gnu-ld: otx2_cpt_devlink.o: in function `otx2_cpt_dl_uc_info':
otx2_cpt_devlink.c:27: undefined reference to `devlink_priv'

Fixes: fed8f4d5f946 ("crypto: octeontx2 - parameters for custom engine groups")

Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: memneq - avoid implicit unaligned accesses

The C standard does not support dereferencing pointers that are not
aligned with respect to the pointed-to type, and doing so is technically
undefined behavior, even if the underlying hardware supports it.

This means that conditionally dereferencing such pointers based on
whether CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y is not the right thing
to do, and actually results in alignment faults on ARM, which are fixed
up on a slow path. Instead, we should use the unaligned accessors in
such cases: on architectures that don't care about alignment, they will
result in identical codegen whereas, e.g., codegen on ARM will avoid
doubleword loads and stores but use ordinary ones, which are able to
tolerate misalignment.

Link: https://lore.kernel.org/linux-crypto/CAHk-=wiKkdYLY0bv+nXrcJz3NH9mAqPAafX7PpW5EwVtxsEu7Q@mail.gmail.com/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: authenc - Fix sleep in atomic context in decrypt_tail

The function crypto_authenc_decrypt_tail discards its flags
argument and always relies on the flags from the original request
when starting its sub-request.

This is clearly wrong as it may cause the SLEEPABLE flag to be
set when it shouldn't.

Fixes: 92d95ba91772 ("crypto: authenc - Convert to new AEAD interface")
Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: rsa-pkcs1pad - use clearer variable names

The new convention for akcipher_alg::verify makes it unclear which
values are the lengths of the signature and digest.  Add local variables
to make it clearer what is going on.

Also rename the digest_size variable in pkcs1pad_sign(), as it is
actually the digest *info* size, not the digest size which is different.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: rsa-pkcs1pad - fix buffer overread in pkcs1pad_verify_complete()

Before checking whether the expected digest_info is present, we need to
check that there are enough bytes remaining.

Fixes: a49de377e051 ("crypto: Add hash param to pkcs1pad")
Cc: <stable@vger.kernel.org> # v4.6+
Cc: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: rsa-pkcs1pad - restore signature length check

RSA PKCS#1 v1.5 signatures are required to be the same length as the RSA
key size.  RFC8017 specifically requires the verifier to check this
(https://datatracker.ietf.org/doc/html/rfc8017#section-8.2.2).

Commit a49de377e051 ("crypto: Add hash param to pkcs1pad") changed the
kernel to allow longer signatures, but didn't explain this part of the
change; it seems to be unrelated to the rest of the commit.

Revert this change, since it doesn't appear to be correct.

We can be pretty sure that no one is relying on overly-long signatures
(which would have to be front-padded with zeroes) being supported, given
that they would have been broken since commit c7381b012872
("crypto: akcipher - new verify API for public key algorithms").

Fixes: a49de377e051 ("crypto: Add hash param to pkcs1pad")
Cc: <stable@vger.kernel.org> # v4.6+
Cc: Tadeusz Struk <tadeusz.struk@linaro.org>
Suggested-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: rsa-pkcs1pad - correctly get hash from source scatterlist

Commit c7381b012872 ("crypto: akcipher - new verify API for public key
algorithms") changed akcipher_alg::verify to take in both the signature
and the actual hash and do the signature verification, rather than just
return the hash expected by the signature as was the case before.  To do
this, it implemented a hack where the signature and hash are
concatenated with each other in one scatterlist.

Obviously, for this to work correctly, akcipher_alg::verify needs to
correctly extract the two items from the scatterlist it is given.
Unfortunately, it doesn't correctly extract the hash in the case where
the signature is longer than the RSA key size, as it assumes that the
signature's length is equal to the RSA key size.  This causes a prefix
of the hash, or even the entire hash, to be taken from the *signature*.

(Note, the case of a signature longer than the RSA key size should not
be allowed in the first place; a separate patch will fix that.)

It is unclear whether the resulting scheme has any useful security
properties.

Fix this by correctly extracting the hash from the scatterlist.

Fixes: c7381b012872 ("crypto: akcipher - new verify API for public key algorithms")
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: rsa-pkcs1pad - only allow with rsa

The pkcs1pad template can be instantiated with an arbitrary akcipher
algorithm, which doesn't make sense; it is specifically an RSA padding
scheme.  Make it check that the underlying algorithm really is RSA.

Fixes: 3d5b1ecdea6f ("crypto: rsa - RSA padding algorithm")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qat - fix access to PFVF interrupt registers for GEN4

The logic that detects, enables and disables pfvf interrupts was
expecting a single CSR per VF. Instead, the source and mask register are
two registers with a bit per VF.
Due to this, the driver is reading and setting reserved CSRs and not
masking the correct source of interrupts.

Fix the access to the source and mask register for QAT GEN4 devices by
removing the outer loop in adf_gen4_get_vf2pf_sources(),
adf_gen4_enable_vf2pf_interrupts() and
adf_gen4_disable_vf2pf_interrupts() and changing the helper macros
ADF_4XXX_VM2PF_SOU and ADF_4XXX_VM2PF_MSK.

Fixes: a9dc0d966605 ("crypto: qat - add PFVF support to the GEN4 host driver")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Co-developed-by: Siming Wan <siming.wan@intel.com>
Signed-off-by: Siming Wan <siming.wan@intel.com>
Reviewed-by: Xin Zeng <xin.zeng@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

arm64: lib: accelerate crc32_be

It makes no sense to leave crc32_be using the generic code while we
only accelerate the little-endian ops.

Even though the big-endian form doesn't fit as smoothly into the arm64,
we can speed it up and avoid hitting the D cache.

Tested on Cortex-A53. Without acceleration:

    crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
    crc32: self tests passed, processed 225944 bytes in 192240 nsec
    crc32c: CRC_LE_BITS = 64
    crc32c: self tests passed, processed 112972 bytes in 21360 nsec

With acceleration:

    crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
    crc32: self tests passed, processed 225944 bytes in 53480 nsec
    crc32c: CRC_LE_BITS = 64
    crc32c: self tests passed, processed 112972 bytes in 21480 nsec

Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Tested-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

lib/crc32test: correct printed bytes count

crc32c_le self test had a stray multiply by two inherited from
the crc32_le+crc32_be test loop.

Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

lib/crc32: Make crc32_be weak for arch override

crc32_le and __crc32c_le can be overridden - extend this to crc32_be.

Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

lib/crc32: remove unneeded casts

Casts were added in commit 8f243af42ade ("sections: fix const sections
for crc32 table") to cope with the tables not being const. They are no
longer required since commit f5e38b9284e1 ("lib: crc32: constify crc32
lookup table").

Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: kdf - Select hmac in addition to sha256

In addition to sha256 we must also enable hmac for the kdf self-test
to work.

Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: 304b4acee2f0 ("crypto: kdf - select SHA-256 required...")
Fixes: 026a733e6659 ("crypto: kdf - add SP800-108 counter key...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sun8i-ss - really disable hash on A80

When adding hashes support to sun8i-ss, I have added them only on A83T.
But I forgot that 0 is a valid algorithm ID, so hashes are enabled on A80 but
with an incorrect ID.
Anyway, even with correct IDs, hashes do not work on A80 and I cannot
find why.
So let's disable all of them on A80.

Fixes: d9b45418a917 ("crypto: sun8i-ss - support hash algorithms")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: x86 - Convert to SPDX identifier

Use SPDX-License-Identifier instead of a verbose license text and
update external link.

Cc: James Guilford <james.guilford@intel.com>
Cc: Sean Gulley <sean.m.gulley@intel.com>
Cc: Chandramouli Narayanan <mouli@linux.intel.com>
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: testmgr - Move crypto_simd_disabled_for_test out

As testmgr is part of cryptomgr which was designed to be unloadable
as a module, it shouldn't export any symbols for other crypto
modules to use as that would prevent it from being unloaded.  All
its functionality is meant to be accessed through notifiers.

The symbol crypto_simd_disabled_for_test was added to testmgr
which caused it to be pinned as a module if its users were also
loaded.  This patch moves it out of testmgr and into crypto/algapi.c
so cryptomgr can again be unloaded and replaced on demand.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: cavium - HW_RANDOM_CAVIUM should depend on ARCH_THUNDER

The Cavium ThunderX Random Number Generator is only present on Cavium
ThunderX SoCs, and not available as an independent PCIe endpoint.  Hence
add a dependency on ARCH_THUNDER, to prevent asking the user about this
driver when configuring a kernel without Cavium Thunder SoC  support.

Fixes: cc2f1908c6b8f625 ("hwrng: cavium - Add Cavium HWRNG driver for ThunderX SoC.")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ccp - remove redundant ret variable

Return value from ccp_crypto_enqueue_request() directly instead
of taking this in another redundant variable.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qat - fix a signedness bug in get_service_enabled()

The "ret" variable needs to be signed or there is an error message which
will not be printed correctly.

Fixes: 0cec19c761e5 ("crypto: qat - add support for compression for 4xxx")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ccp - Ensure psp_ret is always init'd in __sev_platform_init_locked()

Initialize psp_ret inside of __sev_platform_init_locked() because there
are many failure paths with PSP initialization that do not set
__sev_do_cmd_locked().

Fixes: e423b9d75e77: ("crypto: ccp - Move SEV_INIT retry for corrupted data")

Signed-off-by: Peter Gonda <pgonda@google.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: John Allen <john.allen@amd.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: tcrypt - add asynchronous speed test for SM3

tcrypt supports testing of SM3 hash algorithms that use AVX
instruction acceleration.

In order to add the sm3 asynchronous test to the appropriate
position, shift the testcase sequence number of the multi buffer
backward and start from 450.

Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: x86/sm3 - add AVX assembly implementation

This patch adds AVX assembly accelerated implementation of SM3 secure
hash algorithm. From the benchmark data, compared to pure software
implementation sm3-generic, the performance increase is up to 38%.

The main algorithm implementation based on SM3 AES/BMI2 accelerated
work by libgcrypt at:
https://gnupg.org/software/libgcrypt/index.html

Benchmark on Intel i5-6200U 2.30GHz, performance data of two
implementations, pure software sm3-generic and sm3-avx acceleration.
The data comes from the 326 mode and 422 mode of tcrypt. The abscissas
are different lengths of per update. The data is tabulated and the
unit is Mb/s:

update-size |     16      64     256    1024    2048    4096    8192
------------+-------------------------------------------------------
sm3-generic | 105.97  129.60  182.12  189.62  188.06  193.66  194.88
sm3-avx     | 119.87  163.05  244.44  260.92  257.60  264.87  265.88

Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sm3 - make dependent on sm3 library

SM3 generic library is stand-alone implementation, it is necessary
making the sm3-generic implementation to depends on SM3 library.
The functions crypto_sm3_*() provided by sm3_generic is no longer
exported.

Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sm2 - make dependent on sm3 library

SM3 generic library is stand-alone implementation, it is necessary
for the calculation of sm2 z digest to depends on SM3 library
instead of sm3-generic.

Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: arm64/sm3-ce - make dependent on sm3 library

SM3 generic library is stand-alone implementation, sm3-ce can depend
on the SM3 library instead of sm3-generic.

Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sm3 - create SM3 stand-alone library

Stand-alone implementation of the SM3 algorithm. It is designed
to have as little dependencies as possible. In other cases you
should generally use the hash APIs from include/crypto/hash.h.
Especially when hashing large amounts of data as those APIs may
be hw-accelerated. In the new SM3 stand-alone library,
sm3_transform() has also been optimized, instead of simply using
the code in sm3_generic.

Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Documentation: update debugfs doc for Hisilicon HPRE

Update documentation describing DebugFS for function's QoS limiting.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Documentation: update debugfs doc for Hisilicon ZIP

Update documentation describing DebugFS for function's QoS limiting.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Documentation: update debugfs doc for Hisilicon SEC

Update documentation describing DebugFS for function's QoS limiting.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Documentation: use the tabs on all acc documentation

Use the tabs on all Hisilicon Accelerator documentation. including
hpre, sec, zip.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Linux 5.17-rc1

Merge tag 'perf-tools-for-v5.17-2022-01-22' of git://git./linux/kernel/git/acme/linux

Pull more perf tools updates from Arnaldo Carvalho de Melo:

 - Fix printing 'phys_addr' in 'perf script'.

 - Fix failure to add events with 'perf probe' in ppc64 due to not
   removing leading dot (ppc64 ABIv1).

 - Fix cpu_map__item() python binding building.

 - Support event alias in form foo-bar-baz, add pmu-events and
   parse-event tests for it.

 - No need to setup affinities when starting a workload or attaching to
   a pid.

 - Use path__join() to compose a path instead of ad-hoc snprintf()
   equivalent.

 - Override attr->sample_period for non-libpfm4 events.

 - Use libperf cpumap APIs instead of accessing the internal state
   directly.

 - Sync x86 arch prctl headers and files changed by the new
   set_mempolicy_home_node syscall with the kernel sources.

 - Remove duplicate include in cpumap.h.

 - Remove redundant err variable.

* tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf tools: Remove redundant err variable
  perf test: Add parse-events test for aliases with hyphens
  perf test: Add pmu-events test for aliases with hyphens
  perf parse-events: Support event alias in form foo-bar-baz
  perf evsel: Override attr->sample_period for non-libpfm4 events
  perf cpumap: Remove duplicate include in cpumap.h
  perf cpumap: Migrate to libperf cpumap api
  perf python: Fix cpu_map__item() building
  perf script: Fix printing 'phys_addr' failure issue
  tools headers UAPI: Sync files changed by new set_mempolicy_home_node syscall
  tools headers UAPI: Sync x86 arch prctl headers with the kernel sources
  perf machine: Use path__join() to compose a path instead of snprintf(dir, '/', filename)
  perf evlist: No need to setup affinities when disabling events for pid targets
  perf evlist: No need to setup affinities when enabling events for pid targets
  perf stat: No need to setup affinities when starting a workload
  perf affinity: Allow passing a NULL arg to affinity__cleanup()
  perf probe: Fix ppc64 'perf probe add events failed' case

Merge tag 'trace-v5.17-3' of git://git./linux/kernel/git/rostedt/linux-trace

Pull ftrace fix from Steven Rostedt:
 "Fix s390 breakage from sorting mcount tables.

  The latest merge of the tracing tree sorts the mcount table at build
  time. But s390 appears to do things differently (like always) and
  replaces the sorted table back to the original unsorted one. As the
  ftrace algorithm depends on it being sorted, bad things happen when it
  is not, and s390 experienced those bad things.

  Add a new config to tell the boot if the mcount table is sorted or
  not, and allow s390 to opt out of it"

* tag 'trace-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Fix assuming build time sort works for s390

ftrace: Fix assuming build time sort works for s390

To speed up the boot process, as mcount_loc needs to be sorted for ftrace
to work properly, sorting it at build time is more efficient than boot up
and can save milliseconds of time. Unfortunately, this change broke s390
as it will modify the mcount_loc location after the sorting takes place
and will put back the unsorted locations. Since the sorting is skipped at
boot up if it is believed that it was sorted at run time, ftrace can crash
as its algorithms are dependent on the list being sorted.

Add a new config BUILDTIME_MCOUNT_SORT that is set when
BUILDTIME_TABLE_SORT but not if S390 is set. Use this config to determine
if sorting should take place at boot up.

Link: https://lore.kernel.org/all/yt9dee51ctfn.fsf@linux.ibm.com/
Fixes: 72b3942a173c ("scripts: ftrace - move the sort-processing in ftrace_init")
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Merge tag 'kbuild-fixes-v5.17' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Bring include/uapi/linux/nfc.h into the UAPI compile-test coverage

 - Revert the workaround of CONFIG_CC_IMPLICIT_FALLTHROUGH

 - Fix build errors in certs/Makefile

* tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  certs: Fix build error when CONFIG_MODULE_SIG_KEY is empty
  certs: Fix build error when CONFIG_MODULE_SIG_KEY is PKCS#11 URI
  Revert "Makefile: Do not quote value for CONFIG_CC_IMPLICIT_FALLTHROUGH"
  usr/include/Makefile: add linux/nfc.h to the compile-test coverage

Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linux

Pull bitmap updates from Yury Norov:

 - introduce for_each_set_bitrange()

 - use find_first_*_bit() instead of find_next_*_bit() where possible

 - unify for_each_bit() macros

* tag 'bitmap-5.17-rc1' of git://github.com/norov/linux:
  vsprintf: rework bitmap_list_string
  lib: bitmap: add performance test for bitmap_print_to_pagebuf
  bitmap: unify find_bit operations
  mm/percpu: micro-optimize pcpu_is_populated()
  Replace for_each_*_bit_from() with for_each_*_bit() where appropriate
  find: micro-optimize for_each_{set,clear}_bit()
  include/linux: move for_each_bit() macros from bitops.h to find.h
  cpumask: replace cpumask_next_* with cpumask_first_* where appropriate
  tools: sync tools/bitmap with mother linux
  all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
  cpumask: use find_first_and_bit()
  lib: add find_first_and_bit()
  arch: remove GENERIC_FIND_FIRST_BIT entirely
  include: move find.h from asm_generic to linux
  bitops: move find_bit_*_le functions from le.h to find.h
  bitops: protect find_first_{,zero}_bit properly

perf tools: Remove redundant err variable

Return value from perf_event__process_tracing_data() directly instead
of taking this in another redundant variable.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20220112080109.666800-1-chi.minghao@zte.com.cn
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test: Add parse-events test for aliases with hyphens

Add a test which allows us to test parsing an event alias with hyphens.

Since these events typically do not exist on most host systems, add the
alias to the fake pmu.

Function perf_pmu__test_parse_init() has terms added to match known test
aliases.

Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-4-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test: Add pmu-events test for aliases with hyphens

Add a test for aliases with hyphens in the name to ensure that the
pmu-events tables are as expects. There should be no reason why these sort
of aliases would be treated differently, but no harm in checking.

Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-3-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf parse-events: Support event alias in form foo-bar-baz

Event aliasing for events whose name in the form foo-bar-baz is not
supported, while foo-bar, foo_bar_baz, and other combinations are, i.e.
two hyphens are not supported.

The HiSilicon D06 platform has events in such form:

  $ ./perf list sdir-home-migrate

  List of pre-defined events (to be used in -e):

  uncore hha:
    sdir-home-migrate
   [Unit: hisi_sccl,hha]

  $ sudo ./perf stat -e sdir-home-migrate
  event syntax error: 'sdir-home-migrate'
                          \___ parser error
  Run 'perf list' for a list of valid events

   Usage: perf stat [<options>] [<command>]

   -e, --event <event>event selector. use 'perf list' to list available events

To support, add an extra PMU event symbol type for "baz", and add a new
rule in the bison file.

Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf evsel: Override attr->sample_period for non-libpfm4 events

A previous patch preventing "attr->sample_period" values from being
overridden in pfm events changed a related behaviour in arm-spe.

Before said patch:

  perf record -c 10000 -e arm_spe_0// -- sleep 1

Would yield an SPE event with period=10000. After the patch, the period
in "-c 10000" was being ignored because the arm-spe code initializes
sample_period to a non-zero value.

This patch restores the previous behaviour for non-libpfm4 events.

Fixes: ae5dcc8abe31 (“perf record: Prevent override of attr->sample_period for libpfm4 events”)
Reported-by: Chase Conklin <chase.conklin@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220118144054.2541-1-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf cpumap: Remove duplicate include in cpumap.h

Remove all but the first include of stdbool.h from cpumap.h.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220117083730.863200-1-lv.ruyi@zte.com.cn
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf cpumap: Migrate to libperf cpumap api

Switch from directly accessing the perf_cpu_map to using the appropriate
libperf API when possible. Using the API simplifies the job of
refactoring use of perf_cpu_map.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220122045811.3402706-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf python: Fix cpu_map__item() building

Value should be built as an integer.

Switch some uses of perf_cpu_map to use the library API.

Fixes: 6d18804b963b78dc ("perf cpumap: Give CPUs their own type")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220122045811.3402706-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script: Fix printing 'phys_addr' failure issue

Perf script was failed to print the phys_addr for SPE profiling.
One 'dummy' event is added by SPE profiling but it doesn't have PHYS_ADDR
attribute set, perf script then exits with error.

Now referring to 'addr', use evsel__do_check_stype() to check the type.

Before:

  # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\
store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3
  # perf script -F pid,tid,addr,phys_addr
  Samples for 'dummy:u' event do not have PHYS_ADDR attribute set. Cannot print 'phys_addr' field.

After:

  # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\
store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3
  # perf script -F pid,tid,addr,phys_addr
  4064384/4064384 ffff802f921be0d0      2f921be0d0
  4064384/4064384 ffff802f921be0d0      2f921be0d0

Reviewed-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Yao Jin <jinyao5@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220121065954.2121900-1-liwei391@huawei.com
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

certs: Fix build error when CONFIG_MODULE_SIG_KEY is empty

Since b8c96a6b466c ("certs: simplify $(srctree)/ handling and remove
config_filename macro"), when CONFIG_MODULE_SIG_KEY is empty,
signing_key.x509 fails to build:

    CERT    certs/signing_key.x509
  Usage: extract-cert <source> <dest>
  make[1]: *** [certs/Makefile:78: certs/signing_key.x509] Error 2
  make: *** [Makefile:1831: certs] Error 2

Pass "" to the first argument of extract-cert to fix the build error.

Link: https://lore.kernel.org/linux-kbuild/20220120094606.2skuyb26yjlnu66q@lion.mk-sys.cz/T/#u
Fixes: b8c96a6b466c ("certs: simplify $(srctree)/ handling and remove config_filename macro")
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Michal Kubecek <mkubecek@suse.cz>

certs: Fix build error when CONFIG_MODULE_SIG_KEY is PKCS#11 URI

When CONFIG_MODULE_SIG_KEY is PKCS#11 URL (pkcs11:*), signing_key.x509
fails to build:

  certs/Makefile:77: *** target pattern contains no '%'.  Stop.

Due to the typo, $(X509_DEP) contains a colon.

Fix it.

Fixes: b8c96a6b466c ("certs: simplify $(srctree)/ handling and remove config_filename macro")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Revert "Makefile: Do not quote value for CONFIG_CC_IMPLICIT_FALLTHROUGH"

This reverts commit cd8c917a56f20f48748dd43d9ae3caff51d5b987.

Commit 129ab0d2d9f3 ("kbuild: do not quote string values in
include/config/auto.conf") provided the final solution.

Now reverting the temporary workaround.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

usr/include/Makefile: add linux/nfc.h to the compile-test coverage

As linux/nfc.h userspace compilation was finally fixed by commits
79b69a83705e ("nfc: uapi: use kernel size_t to fix user-space builds")
and 7175f02c4e5f ("uapi: fix linux/nfc.h userspace compilation errors"),
there is no need to keep the compile-test exception for it in
usr/include/Makefile.

Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Merge branch 'akpm' (patches from Andrew)

Merge yet more updates from Andrew Morton:
 "This is the post-linux-next queue. Material which was based on or
  dependent upon material which was in -next.

  69 patches.

  Subsystems affected by this patch series: mm (migration and zsmalloc),
  sysctl, proc, and lib"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (69 commits)
  mm: hide the FRONTSWAP Kconfig symbol
  frontswap: remove support for multiple ops
  mm: mark swap_lock and swap_active_head static
  frontswap: simplify frontswap_register_ops
  frontswap: remove frontswap_test
  mm: simplify try_to_unuse
  frontswap: remove the frontswap exports
  frontswap: simplify frontswap_init
  frontswap: remove frontswap_curr_pages
  frontswap: remove frontswap_shrink
  frontswap: remove frontswap_tmem_exclusive_gets
  frontswap: remove frontswap_writethrough
  mm: remove cleancache
  lib/stackdepot: always do filter_irq_stacks() in stack_depot_save()
  lib/stackdepot: allow optional init and stack_table allocation by kvmalloc()
  proc: remove PDE_DATA() completely
  fs: proc: store PDE()->data into inode->i_private
  zsmalloc: replace get_cpu_var with local_lock
  zsmalloc: replace per zpage lock with pool->migrate_lock
  locking/rwlocks: introduce write_lock_nested
  ...

Merge tag '5.17-rc-part2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:

 - multichannel fixes, addressing additional reconnect and DFS scenarios

 - reenabling fscache support (indexing rewrite, metadata caching e.g.)

 - send additional version information during NTLMSSP negotiate to
   improve debugging

 - fix for a mount race

 - DFS fixes

 - fix for a memory leak for stable

* tag '5.17-rc-part2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module number
  smb3: send NTLMSSP version information
  cifs: Support fscache indexing rewrite
  cifs: cifs_ses_mark_for_reconnect should also update reconnect bits
  cifs: update tcpStatus during negotiate and sess setup
  cifs: make status checks in version independent callers
  cifs: remove repeated state change in dfs tree connect
  cifs: fix the cifs_reconnect path for DFS
  cifs: remove unused variable ses_selected
  cifs: protect all accesses to chan_* with chan_lock
  cifs: fix the connection state transitions with multichannel
  cifs: check reconnects for channels of active tcons too
  smb3: add new defines from protocol specification
  cifs: serialize all mount attempts
  cifs: quirk for STATUS_OBJECT_NAME_INVALID returned for non-ASCII dfs refs
  cifs: alloc_path_with_tree_prefix: do not append sep. if the path is empty
  cifs: clean up an inconsistent indenting
  cifs: free ntlmsspblob allocated in negotiate

Merge tag 'xfs-5.17-merge-7' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:
 "One of the patches removes some dead code from xfs_ioctl32.h and the
  other fixes broken workqueue flushing in the inode garbage collector.

   - Minor cleanup of ioctl32 cruft

   - Clean up open coded inodegc workqueue function calls"

* tag 'xfs-5.17-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: flush inodegc workqueue tasks before cancel
  xfs: remove unused xfs_ioctl32.h declarations

Merge tag 'fscache-fixes-20220121' of git://git./linux/kernel/git/dhowells/linux-fs

Pull more fscache updates from David Howells:
 "A set of fixes and minor updates for the fscache rewrite:

   - Fix mishandling of volume collisions (the wait condition is
     inverted and so it was only waiting if the volume collision was
     already resolved).

   - Fix miscalculation of whether there's space available in
     cachefiles.

   - Make sure a default cache name is set on a cache if the user hasn't
     set one by the time they bind the cache.

   - Adjust the way the backing inode is presented in tracepoints, add a
     tracepoint for mkdir and trace directory lookup.

   - Add a tracepoint for failure to set the active file mark.

   - Add an explanation of the checks made on the backing filesystem.

   - Check that the backing filesystem supports tmpfile.

   - Document how the page-release cancellation of the read-skip
     optimisation works.

  And I've included a change for netfslib:

   - Make ops->init_rreq() optional"

* tag 'fscache-fixes-20220121' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  netfs: Make ops->init_rreq() optional
  fscache: Add a comment explaining how page-release optimisation works
  cachefiles: Check that the backing filesystem supports tmpfiles
  cachefiles: Explain checks in a comment
  cachefiles: Trace active-mark failure
  cachefiles: Make some tracepoint adjustments
  cachefiles: set default tag name if it's unspecified
  cachefiles: Calculate the blockshift in terms of bytes, not pages
  fscache: Fix the volume collision wait condition

Merge tag 'folio-5.17a' of git://git.infradead.org/users/willy/pagecache

Pull more folio updates from Matthew Wilcox:
 "Three small folio patches.

  One bug fix, one patch pulled forward from the patches destined for
  5.18 and then a patch to make use of that functionality"

* tag 'folio-5.17a' of git://git.infradead.org/users/willy/pagecache:
  filemap: Use folio_put_refs() in filemap_free_folio()
  mm: Add folio_put_refs()
  pagevec: Initialise folio_batch->percpu_pvec_drained

Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
 "This series is all the stragglers that didn't quite make the first
  merge window pull. It's mostly minor updates and bug fixes of merge
  window code"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: nsp_cs: Check of ioremap return value
  scsi: ufs: ufs-mediatek: Fix error checking in ufs_mtk_init_va09_pwr_ctrl()
  scsi: ufs: Modify Tactive time setting conditions
  scsi: efct: Remove useless DMA-32 fallback configuration
  scsi: message: fusion: mptctl: Use dma_alloc_coherent()
  scsi: message: fusion: mptsas: Use dma_alloc_coherent()
  scsi: message: fusion: Use dma_alloc_coherent() in mptsas_exp_repmanufacture_info()
  scsi: message: fusion: mptbase: Use dma_alloc_coherent()
  scsi: message: fusion: Use dma_alloc_coherent() in mpt_alloc_fw_memory()
  scsi: message: fusion: Remove usage of the deprecated "pci-dma-compat.h" API
  scsi: megaraid: Avoid mismatched storage type sizes
  scsi: hisi_sas: Remove unused variable and check in hisi_sas_send_ata_reset_each_phy()
  scsi: aic79xx: Remove redundant error variable
  scsi: pm80xx: Port reset timeout error handling correction
  scsi: mpi3mr: Fix formatting problems in some kernel-doc comments
  scsi: mpi3mr: Fix some spelling mistakes
  scsi: mpt3sas: Update persistent trigger pages from sysfs interface
  scsi: core: Fix scsi_mode_select() interface
  scsi: aacraid: Fix spelling of "its"
  scsi: qedf: Fix potential dereference of NULL pointer

Merge tag 'ata-5.17-rc1-part2' of git://git./linux/kernel/git/dlemoal/libata

Pull ATA fix from Damien Le Moal:
 "A single patch to fix a compilation error in the pata_octeon_cf driver
  (mips architecture), from me"

* tag 'ata-5.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: pata_octeon_cf: fix call to trace_ata_bmdma_stop()

Merge tag 'thermal-5.17-rc1-2' of git://git./linux/kernel/git/rafael/linux-pm

Pull more thermal control updates from Rafael Wysocki:
 "Add device IDs for Raptor Lake to the int340x thermal control driver
  (Srinivas Pandruvada)"

* tag 'thermal-5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: int340x: Add Raptor Lake PCI device id
  thermal: int340x: Support Raptor Lake

Merge tag 'acpi-5.17-rc1-3' of git://git./linux/kernel/git/rafael/linux-pm

Pull extra ACPI updates from Rafael Wysocki:
 "These fix and clean up the ACPI CPPC driver on top of the recent
  changes in it merged previously and add some new device IDs to the
  ACPI DPTF driver.

  Specifics:

   - Fix a recently introduced endianness-related issue in the ACPI CPPC
     library and clean it up on top of that (Rafael Wysocki)

   - Add new device IDs for the Raptor Lake SoC to the ACPI DPTF driver
     (Srinivas Pandruvada)"

* tag 'acpi-5.17-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: DPTF: Support Raptor Lake
  ACPI: CPPC: Drop redundant local variable from cpc_read()
  ACPI: CPPC: Fix up I/O port access in cpc_read()

Merge tag 'devicetree-fixes-for-5.17-1' of git://git./linux/kernel/git/robh/linux

Pull devicetree fixes and cleanups from Rob Herring:

 - Fix a regression when probing a child device reusing the parent
   device's DT node pointer

 - Refactor of_parse_phandle*() variants to static inlines

 - Drop Enric Balletbo i Serra as a maintainer

 - Fix DT schemas with arrays incorrectly encoded as a matrix

 - Drop unneeded pinctrl properties from schemas

 - Add SPI peripheral schema to SPI based displays

 - Clean-up several schema examples

 - Clean-up trivial-devices.yaml comments

 - Add missing, in use vendor prefixes: Wingtech, Thundercomm, Huawei,
   F(x)tec, 8devices

* tag 'devicetree-fixes-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: google,cros-ec: drop Enric Balletbo i Serra from maintainers
  dt-bindings: display: bridge: drop Enric Balletbo i Serra from maintainers
  of: Check 'of_node_reused' flag on of_match_device()
  of: property: define of_property_read_u{8,16,32,64}_array() unconditionally
  of: base: make small of_parse_phandle() variants static inline
  dt-bindings: mfd: cirrus,madera: Fix 'interrupts' in example
  dt-bindings: Fix array schemas encoded as matrices
  dt-bindings: Drop unnecessary pinctrl properties
  dt-bindings: rtc: st,stm32-rtc: Make each example a separate entry
  dt-bindings: mmc: arm,pl18x: Make each example a separate entry
  dt-bindings: display: Add SPI peripheral schema to SPI based displays
  scripts/dtc: dtx_diff: remove broken example from help text
  dt-bindings: trivial-devices: fix double spaces in comments
  dt-bindings: trivial-devices: fix swapped comments
  dt-bindings: vendor-prefixes: add Wingtech
  dt-bindings: vendor-prefixes: add Thundercomm
  dt-bindings: vendor-prefixes: add Huawei
  dt-bindings: vendor-prefixes: add F(x)tec
  dt-bindings: vendor-prefixes: add 8devices
  dt-bindings: power: reset: gpio-restart: Correct default priority

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull more kvm updates from Paolo Bonzini:
 "Generic:

   - selftest compilation fix for non-x86

   - KVM: avoid warning on s390 in mark_page_dirty

 x86:

   - fix page write-protection bug and improve comments

   - use binary search to lookup the PMU event filter, add test

   - enable_pmu module parameter support for Intel CPUs

   - switch blocked_vcpu_on_cpu_lock to raw spinlock

   - cleanups of blocked vCPU logic

   - partially allow KVM_SET_CPUID{,2} after KVM_RUN (5.16 regression)

   - various small fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (46 commits)
  docs: kvm: fix WARNINGs from api.rst
  selftests: kvm/x86: Fix the warning in lib/x86_64/processor.c
  selftests: kvm/x86: Fix the warning in pmu_event_filter_test.c
  kvm: selftests: Do not indent with spaces
  kvm: selftests: sync uapi/linux/kvm.h with Linux header
  selftests: kvm: add amx_test to .gitignore
  KVM: SVM: Nullify vcpu_(un)blocking() hooks if AVIC is disabled
  KVM: SVM: Move svm_hardware_setup() and its helpers below svm_x86_ops
  KVM: SVM: Drop AVIC's intermediate avic_set_running() helper
  KVM: VMX: Don't do full kick when handling posted interrupt wakeup
  KVM: VMX: Fold fallback path into triggering posted IRQ helper
  KVM: VMX: Pass desired vector instead of bool for triggering posted IRQ
  KVM: VMX: Don't do full kick when triggering posted interrupt "fails"
  KVM: SVM: Skip AVIC and IRTE updates when loading blocking vCPU
  KVM: SVM: Use kvm_vcpu_is_blocking() in AVIC load to handle preemption
  KVM: SVM: Remove unnecessary APICv/AVIC update in vCPU unblocking path
  KVM: SVM: Don't bother checking for "running" AVIC when kicking for IPIs
  KVM: SVM: Signal AVIC doorbell iff vCPU is in guest mode
  KVM: x86: Remove defunct pre_block/post_block kvm_x86_ops hooks
  KVM: x86: Unexport LAPIC's switch_to_{hv,sw}_timer() helpers
  ...

Merge tag 'for-5.17/parisc-2' of git://git./linux/kernel/git/deller/parisc-linux

Pull more parisc architecture updates from Helge Deller:
 "Fixes and enhancements:

   - a memory leak fix in an error path in pdc_stable (Miaoqian Lin)

   - two compiler warning fixes in the TOC code

   - added autodetection for currently used console type (serial or
     graphics) which inserts console=<type> if it's missing"

* tag 'for-5.17/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: pdc_stable: Fix memory leak in pdcs_register_pathentries
  parisc: Fix missing prototype for 'toc_intr' warning in toc.c
  parisc: Autodetect default output device and set console= kernel parameter
  parisc: Use safer strscpy() in setup_cmdline()
  parisc: Add visible flag to toc_stack variable

Merge tag 'riscv-for-linus-5.17-mw1' of git://git./linux/kernel/git/riscv/linux

Pull more RISC-V updates from Palmer Dabbelt:

 - Support for sv48 paging

 - Hart ID mappings are now sparse, which enables more CPUs to come up
   on systems with sparse hart IDs

 - A handful of cleanups and fixes

* tag 'riscv-for-linus-5.17-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (27 commits)
  RISC-V: nommu_virt: Drop unused SLAB_MERGE_DEFAULT
  RISC-V: Remove redundant err variable
  riscv: dts: sifive unmatched: Add gpio poweroff
  riscv: canaan: remove useless select of non-existing config SYSCON
  RISC-V: Do not use cpumask data structure for hartid bitmap
  RISC-V: Move spinwait booting method to its own config
  RISC-V: Move the entire hart selection via lottery to SMP
  RISC-V: Use __cpu_up_stack/task_pointer only for spinwait method
  RISC-V: Do not print the SBI version during HSM extension boot print
  RISC-V: Avoid using per cpu array for ordered booting
  riscv: default to CONFIG_RISCV_SBI_V01=n
  riscv: fix boolconv.cocci warnings
  riscv: Explicit comment about user virtual address space size
  riscv: Use pgtable_l4_enabled to output mmu_type in cpuinfo
  riscv: Implement sv48 support
  asm-generic: Prepare for riscv use of pud_alloc_one and pud_free
  riscv: Allow to dynamically define VA_BITS
  riscv: Introduce functions to switch pt_ops
  riscv: Split early kasan mapping to prepare sv48 introduction
  riscv: Move KASAN mapping next to the kernel mapping
  ...

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes/cleanups from Catalin Marinas:
 "Some fixes that turned up during the merge window:

   - Add brackets to the io_stop_wc macro

   - Avoid -Warray-bounds warning with the LSE atomics inline asm

   - Apply __ro_after_init to memory_limit"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mm: apply __ro_after_init to memory_limit
  arm64: atomics: lse: Dereference matching size
  asm-generic: Add missing brackets for io_stop_wc macro

Merge tag 'docs-5.17-2' of git://git.lwn.net/linux

Pull documentation fixes from Jonathan Corbet:
 "Three small documentation fixes"

* tag 'docs-5.17-2' of git://git.lwn.net/linux:
  Documentation: fix firewire.rst ABI file path error
  docs: ftrace: fix ambiguous sentence
  docs: staging/tee.rst: fix two typos found while reading

mm: hide the FRONTSWAP Kconfig symbol

Select FRONTSWAP from ZSWAP instead of prompting for it.

Link: https://lkml.kernel.org/r/20211224062246.1258487-14-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

frontswap: remove support for multiple ops

There is only a single instance of frontswap ops in the kernel, so
simplify the frontswap code by removing support for multiple operations.

Link: https://lkml.kernel.org/r/20211224062246.1258487-13-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: mark swap_lock and swap_active_head static

swap_lock and swap_active_head are only used in swapfile.c, so mark them
static.

Link: https://lkml.kernel.org/r/20211224062246.1258487-12-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

frontswap: simplify frontswap_register_ops

Given that frontswap_register_ops must be called from built-in code,
there is no need to handle the case of swapfiles coming online before or
during it, so delete the code that deals with that case.

Link: https://lkml.kernel.org/r/20211224062246.1258487-11-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

frontswap: remove frontswap_test

frontswap_test is unused now, remove it.

Link: https://lkml.kernel.org/r/20211224062246.1258487-10-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: simplify try_to_unuse

Remove the unused frontswap and pages_to_unuse arguments, and mark the
function static now that the caller in frontswap is gone.

[akpm@linux-foundation.org: fix shmem_unuse() stub, per Matthew]

Link: https://lkml.kernel.org/r/20211224062246.1258487-9-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

frontswap: remove the frontswap exports

None of the frontswap API is called from modular code.

Link: https://lkml.kernel.org/r/20211224062246.1258487-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

frontswap: simplify frontswap_init

Just use IS_ENABLED() and remove the __frontswap_init indirection.

Also remove the unused export.

Link: https://lkml.kernel.org/r/20211224062246.1258487-7-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

frontswap: remove frontswap_curr_pages

frontswap_curr_pages is never called, so remove it.

Link: https://lkml.kernel.org/r/20211224062246.1258487-6-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

frontswap: remove frontswap_shrink

frontswap_shrink is never called, so remove it.

Link: https://lkml.kernel.org/r/20211224062246.1258487-5-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

frontswap: remove frontswap_tmem_exclusive_gets

frontswap_tmem_exclusive_gets is never called, so remove it.

Link: https://lkml.kernel.org/r/20211224062246.1258487-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

frontswap: remove frontswap_writethrough

frontswap_writethrough is never called, so remove it.

Link: https://lkml.kernel.org/r/20211224062246.1258487-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: remove cleancache

Patch series "remove Xen tmem leftovers".

Since the removal of the Xen tmem driver in 2019, the cleancache hooks
are entirely unused, as are large parts of frontswap.  This series
against linux-next (with the folio changes included) removes
cleancaches, and cuts down frontswap to the bits actually used by zswap.

This patch (of 13):

The cleancache subsystem is unused since the removal of Xen tmem driver
in commit 814bbf49dcd0 ("xen: remove tmem driver").

[akpm@linux-foundation.org: remove now-unreachable code]

Link: https://lkml.kernel.org/r/20211224062246.1258487-1-hch@lst.de
Link: https://lkml.kernel.org/r/20211224062246.1258487-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/stackdepot: always do filter_irq_stacks() in stack_depot_save()

The non-interrupt portion of interrupt stack traces before interrupt
entry is usually arbitrary.  Therefore, saving stack traces of
interrupts (that include entries before interrupt entry) to stack depot
leads to unbounded stackdepot growth.

As such, use of filter_irq_stacks() is a requirement to ensure
stackdepot can efficiently deduplicate interrupt stacks.

Looking through all current users of stack_depot_save(), none (except
KASAN) pass the stack trace through filter_irq_stacks() before passing
it on to stack_depot_save().

Rather than adding filter_irq_stacks() to all current users of
stack_depot_save(), it became clear that stack_depot_save() should
simply do filter_irq_stacks().

Link: https://lkml.kernel.org/r/20211130095727.2378739-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Imran Khan <imran.f.khan@oracle.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/stackdepot: allow optional init and stack_table allocation by kvmalloc()

Currently, enabling CONFIG_STACKDEPOT means its stack_table will be
allocated from memblock, even if stack depot ends up not actually used.
The default size of stack_table is 4MB on 32-bit, 8MB on 64-bit.

This is fine for use-cases such as KASAN which is also a config option
and has overhead on its own.  But it's an issue for functionality that
has to be actually enabled on boot (page_owner) or depends on hardware
(GPU drivers) and thus the memory might be wasted.  This was raised as
an issue [1] when attempting to add stackdepot support for SLUB's debug
object tracking functionality.  It's common to build kernels with
CONFIG_SLUB_DEBUG and enable slub_debug on boot only when needed, or
create only specific kmem caches with debugging for testing purposes.

It would thus be more efficient if stackdepot's table was allocated only
when actually going to be used.  This patch thus makes the allocation
(and whole stack_depot_init() call) optional:

 - Add a CONFIG_STACKDEPOT_ALWAYS_INIT flag to keep using the current
   well-defined point of allocation as part of mem_init(). Make
   CONFIG_KASAN select this flag.

 - Other users have to call stack_depot_init() as part of their own init
   when it's determined that stack depot will actually be used. This may
   depend on both config and runtime conditions. Convert current users
   which are page_owner and several in the DRM subsystem. Same will be
   done for SLUB later.

 - Because the init might now be called after the boot-time memblock
   allocation has given all memory to the buddy allocator, change
   stack_depot_init() to allocate stack_table with kvmalloc() when
   memblock is no longer available. Also handle allocation failure by
   disabling stackdepot (could have theoretically happened even with
   memblock allocation previously), and don't unnecessarily align the
   memblock allocation to its own size anymore.

[1] https://lore.kernel.org/all/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXEhCvbZyA@mail.gmail.com/

Link: https://lkml.kernel.org/r/20211013073005.11351-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Marco Elver <elver@google.com> # stackdepot
Cc: Marco Elver <elver@google.com>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Oliver Glitta <glittao@gmail.com>
Cc: Imran Khan <imran.f.khan@oracle.com>
From: Colin Ian King <colin.king@canonical.com>
Subject: lib/stackdepot: fix spelling mistake and grammar in pr_err message

There is a spelling mistake of the work allocation so fix this and
re-phrase the message to make it easier to read.

Link: https://lkml.kernel.org/r/20211015104159.11282-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
From: Vlastimil Babka <vbabka@suse.cz>
Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup

On FLATMEM, we call page_ext_init_flatmem_late() just before
kmem_cache_init() which means stack_depot_init() (called by page owner
init) will not recognize properly it should use kvmalloc() and not
memblock_alloc().  memblock_alloc() will also not issue a warning and
return a block memory that can be invalid and cause kernel page fault when
saving stacks, as reported by the kernel test robot [1].

Fix this by moving page_ext_init_flatmem_late() below kmem_cache_init() so
that slab_is_available() is true during stack_depot_init().  SPARSEMEM
doesn't have this issue, as it doesn't do page_ext_init_flatmem_late(),
but a different page_ext_init() even later in the boot process.

Thanks to Mike Rapoport for pointing out the FLATMEM init ordering issue.

While at it, also actually resolve a checkpatch warning in stack_depot_init()
from DRM CI, which was supposed to be in the original patch already.

[1] https://lore.kernel.org/all/20211014085450.GC18719@xsang-OptiPlex-9020/

Link: https://lkml.kernel.org/r/6abd9213-19a9-6d58-cedc-2414386d2d81@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: kernel test robot <oliver.sang@intel.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
From: Vlastimil Babka <vbabka@suse.cz>
Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup3

Due to cd06ab2fd48f ("drm/locking: add backtrace for locking contended
locks without backoff") landing recently to -next adding a new stack depot
user in drivers/gpu/drm/drm_modeset_lock.c we need to add an appropriate
call to stack_depot_init() there as well.

Link: https://lkml.kernel.org/r/2a692365-cfa1-64f2-34e0-8aa5674dce5e@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Marco Elver <elver@google.com>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Oliver Glitta <glittao@gmail.com>
Cc: Imran Khan <imran.f.khan@oracle.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
From: Vlastimil Babka <vbabka@suse.cz>
Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup4

Due to 4e66934eaadc ("lib: add reference counting tracking
infrastructure") landing recently to net-next adding a new stack depot
user in lib/ref_tracker.c we need to add an appropriate call to
stack_depot_init() there as well.

Link: https://lkml.kernel.org/r/45c1b738-1a2f-5b5f-2f6d-86fab206d01c@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Cc: Jiri Slab <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: remove PDE_DATA() completely

Remove PDE_DATA() completely and replace it with pde_data().

[akpm@linux-foundation.org: fix naming clash in drivers/nubus/proc.c]
[akpm@linux-foundation.org: now fix it properly]

Link: https://lkml.kernel.org/r/20211124081956.87711-2-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Alexey Gladkov <gladkov.alexey@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs: proc: store PDE()->data into inode->i_private

PDE_DATA(inode) is introduced to get user private data and hide the
layout of struct proc_dir_entry.  The inode->i_private is used to do the
same thing as well.  Save a copy of user private data to inode->
i_private when proc inode is allocated.  This means the user also can
get their private data by inode->i_private.

Introduce pde_data() to wrap inode->i_private so that we can remove
PDE_DATA() from fs/proc/generic.c and make PTE_DATE() as a wrapper of
pde_data().  It will be easier if we decide to remove PDE_DATE() in the
future.

Link: https://lkml.kernel.org/r/20211124081956.87711-1-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Alexey Gladkov <gladkov.alexey@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zsmalloc: replace get_cpu_var with local_lock

The usage of get_cpu_var() in zs_map_object() is problematic because it
disables preemption and makes it impossible to acquire any sleeping lock
on PREEMPT_RT such as a spinlock_t.

Replace the get_cpu_var() usage with a local_lock_t which is embedded
struct mapping_area.  It ensures that the access the struct is
synchronized against all users on the same CPU.

[minchan: remove the bit_spin_lock part and change the title]

Link: https://lkml.kernel.org/r/20211115185909.3949505-10-minchan@kernel.org
Signed-off-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zsmalloc: replace per zpage lock with pool->migrate_lock

The zsmalloc has used a bit for spin_lock in zpage handle to keep zpage
object alive during several operations.  However, it causes the problem
for PREEMPT_RT as well as introducing too complicated.

This patch replaces the bit spin_lock with pool->migrate_lock rwlock.
It could make the code simple as well as zsmalloc work under PREEMPT_RT.

The drawback is the pool->migrate_lock is bigger granuarity than per
zpage lock so the contention would be higher than old when both
IO-related operations(i.e., zsmalloc, zsfree, zs_[map|unmap]) and
compaction(page/zpage migration) are going in parallel(*, the
migrate_lock is rwlock and IO related functions are all read side lock
so there is no contention).  However, the write-side is fast
enough(dominant overhead is just page copy) so it wouldn't affect much.
If the lock granurity becomes more problem later, we could introduce
table locks based on handle as a hash value.

Link: https://lkml.kernel.org/r/20211115185909.3949505-9-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

locking/rwlocks: introduce write_lock_nested

In preparation for converting bit_spin_lock to rwlock in zsmalloc so
that multiple writers of zspages can run at the same time but those
zspages are supposed to be different zspage instance.  Thus, it's not
deadlock.  This patch adds write_lock_nested to support the case for
LOCKDEP.

[minchan@kernel.org: fix write_lock_nested for RT]
Link: https://lkml.kernel.org/r/YZfrMTAXV56HFWJY@google.com
[bigeasy@linutronix.de: fixup write_lock_nested() implementation]
Link: https://lkml.kernel.org/r/20211123170134.y6xb7pmpgdn4m3bn@linutronix.de
Link: https://lkml.kernel.org/r/20211115185909.3949505-8-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zsmalloc: remove zspage isolation for migration

zspage isolation for migration introduced additional exceptions to be
dealt with since the zspage was isolated from class list.  The reason
why I isolated zspage from class list was to prevent race between
obj_malloc and page migration via allocating zpage from the zspage
further.  However, it couldn't prevent object freeing from zspage so it
needed corner case handling.

This patch removes the whole mess.  Now, we are fine since class->lock
and zspage->lock can prevent the race.

Link: https://lkml.kernel.org/r/20211115185909.3949505-7-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zsmalloc: move huge compressed obj from page to zspage

The flag aims for zspage, not per page.  Let's move it to zspage.

Link: https://lkml.kernel.org/r/20211115185909.3949505-6-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zsmalloc: introduce obj_allocated

The usage pattern for obj_to_head is to check whether the zpage is
allocated or not.  Thus, introduce obj_allocated.

Link: https://lkml.kernel.org/r/20211115185909.3949505-5-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zsmalloc: decouple class actions from zspage works

This patch moves class stat update out of obj_malloc since it's not
related to zspage operation.  This is a preparation to introduce new
lock scheme in next patch.

Link: https://lkml.kernel.org/r/20211115185909.3949505-4-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zsmalloc: rename zs_stat_type to class_stat_type

The stat aims for class stat, not zspage so rename it.

Link: https://lkml.kernel.org/r/20211115185909.3949505-3-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zsmalloc: introduce some helper functions

Patch series "zsmalloc: remove bit_spin_lock", v2.

zsmalloc uses bit_spin_lock to minimize space overhead since it's zpage
granularity lock.  However, it causes zsmalloc non-working under
PREEMPT_RT as well as adding too much complication.

This patchset tries to replace the bit_spin_lock with per-pool rwlock.
It also removes unnecessary zspage isolation logic from class, which was
the other part too much complication added into zsmalloc.

Last patch changes the get_cpu_var to local_lock to make it work in
PREEMPT_RT.

This patch (of 9):

get_zspage_mapping returns fullness as well as class_idx.  However, the
fullness is usually not used since it could be stale in some contexts.
It causes misleading as well as unnecessary instructions so this patch
introduces zspage_class.

obj_to_location also produces page and index but we don't need always
the index, either so this patch introduces obj_to_page.

Link: https://lkml.kernel.org/r/20211115185909.3949505-1-minchan@kernel.org
Link: https://lkml.kernel.org/r/20211115185909.3949505-2-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysctl: returns -EINVAL when a negative value is passed to proc_doulongvec_minmax

When we pass a negative value to the proc_doulongvec_minmax() function,
the function returns 0, but the corresponding interface value does not
change.

we can easily reproduce this problem with the following commands:

    cd /proc/sys/fs/epoll
    echo -1 > max_user_watches; echo $?; cat max_user_watches

This function requires a non-negative number to be passed in, so when a
negative number is passed in, -EINVAL is returned.

Link: https://lkml.kernel.org/r/20211220092627.3744624-1-libaokun1@huawei.com
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/sysctl.c: remove unused variable ten_thousand

The const variable ten_thousand is not used, it is redundant and can be
removed.

Cleans up clang warning:

  kernel/sysctl.c:99:18: warning: unused variable 'ten_thousand' [-Wunused-const-variable]
  static const int ten_thousand = 10000;

Link: https://lkml.kernel.org/r/20211221184501.574670-1-colin.i.king@gmail.com
Fixes: c26da54dc8ca ("printk: move printk sysctl to printk/sysctl.c")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kprobe: move sysctl_kprobes_optimization to kprobes.c

kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.

To help with this maintenance let's start by moving sysctls to places
where they actually belong.  The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.

Move sysctl_kprobes_optimization from kernel/sysctl.c to
kernel/kprobes.c.  Use register_sysctl() to register the sysctl
interface.

[mcgrof@kernel.org: fix compile issue when CONFIG_OPTPROBES is disabled]

Link: https://lkml.kernel.org/r/20211129211943.640266-7-mcgrof@kernel.org
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Stephen Kitt <steve@sk2.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>