review.tizen.org Git - platform/kernel/linux-starfive.git/log

tpm: tis_i2c: Fix sanity check interrupt enable mask

[ Upstream commit 561d6ef75628db9cce433e573aa3cdb6b3bba903 ]

The sanity check mask for TPM_INT_ENABLE register was off by 8 bits,
resulting in failure to probe if the TPM_INT_ENABLE register was a
valid value.

Fixes: bbc23a07b072 ("tpm: Add tpm_tis_i2c backend for tpm_tis_core")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arch: arm64: apple: t8103: Use standard "iommu" node name

[ Upstream commit 56d32c51dffac8a431b472a4c31efb8563b048d1 ]

The PCIe iommu nodes use "dart" as node names. Replace it with the
the standard "iommu" node name as all other iommu nodes.

Fixes: 3c866bb79577 ("arm64: dts: apple: t8103: Add PCIe DARTs")
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pstore: Avoid kcore oops by vmap()ing with VM_IOREMAP

[ Upstream commit e6b842741b4f39007215fd7e545cb55aa3d358a2 ]

An oops can be induced by running 'cat /proc/kcore > /dev/null' on
devices using pstore with the ram backend because kmap_atomic() assumes
lowmem pages are accessible with __va().

Unable to handle kernel paging request at virtual address ffffff807ff2b000
Mem abort info:
ESR = 0x96000006
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x06: level 2 translation fault
Data abort info:
ISV = 0, ISS = 0x00000006
CM = 0, WnR = 0
swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000081d87000
[ffffff807ff2b000] pgd=180000017fe18003, p4d=180000017fe18003, pud=180000017fe18003, pmd=0000000000000000
Internal error: Oops: 96000006 [#1] PREEMPT SMP
Modules linked in: dm_integrity
CPU: 7 PID: 21179 Comm: perf Not tainted 5.15.67-10882-ge4eb2eb988cd #1 baa443fb8e8477896a370b31a821eb2009f9bfba
Hardware name: Google Lazor (rev3 - 8) (DT)
pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __memcpy+0x110/0x260
lr : vread+0x194/0x294
sp : ffffffc013ee39d0
x29: ffffffc013ee39f0 x28: 0000000000001000 x27: ffffff807ff2b000
x26: 0000000000001000 x25: ffffffc0085a2000 x24: ffffff802d4b3000
x23: ffffff80f8a60000 x22: ffffff802d4b3000 x21: ffffffc0085a2000
x20: ffffff8080b7bc68 x19: 0000000000001000 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: ffffffd3073f2e60
x14: ffffffffad588000 x13: 0000000000000000 x12: 0000000000000001
x11: 00000000000001a2 x10: 00680000fff2bf0b x9 : 03fffffff807ff2b
x8 : 0000000000000001 x7 : 0000000000000000 x6 : 0000000000000000
x5 : ffffff802d4b4000 x4 : ffffff807ff2c000 x3 : ffffffc013ee3a78
x2 : 0000000000001000 x1 : ffffff807ff2b000 x0 : ffffff802d4b3000
Call trace:
__memcpy+0x110/0x260
read_kcore+0x584/0x778
proc_reg_read+0xb4/0xe4

During early boot, memblock reserves the pages for the ramoops reserved
memory node in DT that would otherwise be part of the direct lowmem
mapping. Pstore's ram backend reuses those reserved pages to change the
memory type (writeback or non-cached) by passing the pages to vmap()
(see pfn_to_page() usage in persistent_ram_vmap() for more details) with
specific flags. When read_kcore() starts iterating over the vmalloc
region, it runs over the virtual address that vmap() returned for
ramoops. In aligned_vread() the virtual address is passed to
vmalloc_to_page() which returns the page struct for the reserved lowmem
area. That lowmem page is passed to kmap_atomic(), which effectively
calls page_to_virt() that assumes a lowmem page struct must be directly
accessible with __va() and friends. These pages are mapped via vmap()
though, and the lowmem mapping was never made, so accessing them via the
lowmem virtual address oopses like above.

Let's side-step this problem by passing VM_IOREMAP to vmap(). This will
tell vread() to not include the ramoops region in the kcore. Instead the
area will look like a bunch of zeros. The alternative is to teach kmap()
about vmalloc areas that intersect with lowmem. Presumably such a change
isn't a one-liner, and there isn't much interest in inspecting the
ramoops region in kcore files anyway, so the most expedient route is
taken for now.

Cc: Brian Geffon <bgeffon@google.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 404a6043385d ("staging: android: persistent_ram: handle reserving and mapping memory")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221205233136.3420802-1-swboyd@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: mmp: fix timer_read delay

[ Upstream commit e348b4014c31041e13ff370669ba3348c4d385e3 ]

timer_read() was using an empty 100-iteration loop to wait for the
TMR_CVWR register to capture the latest timer counter value. The delay
wasn't long enough. This resulted in CPU idle time being extremely
underreported on PXA168 with CONFIG_NO_HZ_IDLE=y.

Switch to the approach used in the vendor kernel, which implements the
capture delay by reading TMR_CVWR a few times instead.

Fixes: 49cbe78637eb ("[ARM] pxa: add base support for Marvell's PXA168 processor line")
Signed-off-by: Doug Brown <doug@schmorgal.com>
Link: https://lore.kernel.org/r/20221204005117.53452-3-doug@schmorgal.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pstore/ram: Fix error return code in ramoops_probe()

[ Upstream commit e1fce564900f8734edf15b87f028c57e14f6e28d ]

In the if (dev_of_node(dev) && !pdata) path, the "err" may be assigned a
value of 0, so the error return code -EINVAL may be incorrectly set
to 0. To fix set valid return code before calling to goto.

Fixes: 35da60941e44 ("pstore/ram: add Device Tree bindings")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/1669969374-46582-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

seccomp: Move copy_seccomp() to no failure path.

[ Upstream commit a1140cb215fa13dcec06d12ba0c3ee105633b7c4 ]

Our syzbot instance reported memory leaks in do_seccomp() [0], similar
to the report [1].  It shows that we miss freeing struct seccomp_filter
and some objects included in it.

We can reproduce the issue with the program below [2] which calls one
seccomp() and two clone() syscalls.

The first clone()d child exits earlier than its parent and sends a
signal to kill it during the second clone(), more precisely before the
fatal_signal_pending() test in copy_process().  When the parent receives
the signal, it has to destroy the embryonic process and return -EINTR to
user space.  In the failure path, we have to call seccomp_filter_release()
to decrement the filter's refcount.

Initially, we called it in free_task() called from the failure path, but
the commit 3a15fb6ed92c ("seccomp: release filter after task is fully
dead") moved it to release_task() to notify user space as early as possible
that the filter is no longer used.

To keep the change and current seccomp refcount semantics, let's move
copy_seccomp() just after the signal check and add a WARN_ON_ONCE() in
free_task() for future debugging.

[0]:
unreferenced object 0xffff8880063add00 (size 256):
  comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.914s)
  hex dump (first 32 bytes):
    01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00  ................
    ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
  backtrace:
    do_seccomp (./include/linux/slab.h:600 ./include/linux/slab.h:733 kernel/seccomp.c:666 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991)
    do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
    entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
unreferenced object 0xffffc90000035000 (size 4096):
  comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.915s)
  hex dump (first 32 bytes):
    01 00 00 00 00 00 00 00 00 00 00 00 05 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    __vmalloc_node_range (mm/vmalloc.c:3226)
    __vmalloc_node (mm/vmalloc.c:3261 (discriminator 4))
    bpf_prog_alloc_no_stats (kernel/bpf/core.c:91)
    bpf_prog_alloc (kernel/bpf/core.c:129)
    bpf_prog_create_from_user (net/core/filter.c:1414)
    do_seccomp (kernel/seccomp.c:671 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991)
    do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
    entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
unreferenced object 0xffff888003fa1000 (size 1024):
  comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.915s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    bpf_prog_alloc_no_stats (./include/linux/slab.h:600 ./include/linux/slab.h:733 kernel/bpf/core.c:95)
    bpf_prog_alloc (kernel/bpf/core.c:129)
    bpf_prog_create_from_user (net/core/filter.c:1414)
    do_seccomp (kernel/seccomp.c:671 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991)
    do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
    entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
unreferenced object 0xffff888006360240 (size 16):
  comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.915s)
  hex dump (first 16 bytes):
    01 00 37 00 76 65 72 6c e0 83 01 06 80 88 ff ff  ..7.verl........
  backtrace:
    bpf_prog_store_orig_filter (net/core/filter.c:1137)
    bpf_prog_create_from_user (net/core/filter.c:1428)
    do_seccomp (kernel/seccomp.c:671 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991)
    do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
    entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
unreferenced object 0xffff8880060183e0 (size 8):
  comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.915s)
  hex dump (first 8 bytes):
    06 00 00 00 00 00 ff 7f                          ........
  backtrace:
    kmemdup (mm/util.c:129)
    bpf_prog_store_orig_filter (net/core/filter.c:1144)
    bpf_prog_create_from_user (net/core/filter.c:1428)
    do_seccomp (kernel/seccomp.c:671 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991)
    do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
    entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)

[1]: https://syzkaller.appspot.com/bug?id=2809bb0ac77ad9aa3f4afe42d6a610aba594a987

[2]:
#define _GNU_SOURCE
#include <sched.h>
#include <signal.h>
#include <unistd.h>
#include <sys/syscall.h>
#include <linux/filter.h>
#include <linux/seccomp.h>

void main(void)
{
struct sock_filter filter[] = {
BPF_STMT(BPF_RET | BPF_K, SECCOMP_RET_ALLOW),
};
struct sock_fprog fprog = {
.len = sizeof(filter) / sizeof(filter[0]),
.filter = filter,
};
long i, pid;

syscall(__NR_seccomp, SECCOMP_SET_MODE_FILTER, 0, &fprog);

for (i = 0; i < 2; i++) {
pid = syscall(__NR_clone, CLONE_NEWNET | SIGKILL, NULL, NULL, 0);
if (pid == 0)
return;
}
}

Fixes: 3a15fb6ed92c ("seccomp: release filter after task is fully dead")
Reported-by: syzbot+ab17848fe269b573eb71@syzkaller.appspotmail.com
Reported-by: Ayushman Dutta <ayudutta@amazon.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220823154532.82913-1-kuniyu@amazon.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/perf: hisi: Fix some event id for hisi-pcie-pmu

[ Upstream commit 6b4bb4f38dbfe85247f006f06135ba46450d5bf0 ]

Some event id of hisi-pcie-pmu is incorrect, fix them.

Fixes: 8404b0fbc7fb ("drivers/perf: hisi: Add driver for HiSilicon PCIe PMU")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20221117084136.53572-2-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: apple: rtkit: Stop casting function pointer signatures

[ Upstream commit 5acf07ff25f0c1c44105e6b8ebf88c55a0a04d2f ]

Fixes: 9bd1d9a0d8bb ("soc: apple: Add RTKit IPC library")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: apple: sart: Stop casting function pointer signatures

[ Upstream commit 422d0b860dc223b5dfc6d083697cae258bb5a4a1 ]

Fixes: b170143ae111 ("soc: apple: Add SART driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: armada-3720-turris-mox: Add missing interrupt for RTC

[ Upstream commit 21aad8ba615e9c39cee6c5d0b76726f63791926c ]

MCP7940MT-I/MNY RTC has connected interrupt line to GPIO2_5.

Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: turris-omnia: Add switch port 6 node

[ Upstream commit f87db2005f73876602211af0ee156817019b6bda ]

Switch port 6 is connected to eth0, so add appropriate device tree node for it.

Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: turris-omnia: Add ethernet aliases

[ Upstream commit f1f3e530c59a7e8c5f06172f4c28b945a6b4bfb8 ]

This allows bootloader to correctly pass MAC addresses used by bootloader
to individual interfaces into kernel device tree.

Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: armada-39x: Fix assigned-addresses for every PCIe Root Port

[ Upstream commit 69236d2391b4d7324b11c3252921571577892e7b ]

BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.

Fixes: 538da83ddbea ("ARM: mvebu: add Device Tree files for Armada 39x SoC and board")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: armada-38x: Fix assigned-addresses for every PCIe Root Port

[ Upstream commit 44f47b7a8fa4678ce4c38ea74837e4996b9df6d6 ]

BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.

Fixes: 0d3d96ab0059 ("ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: armada-375: Fix assigned-addresses for every PCIe Root Port

[ Upstream commit 823956d2436f70ced74c0fe8ab99facd8abfc060 ]

BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.

Fixes: 4de59085091f ("ARM: mvebu: add Device Tree description of the Armada 375 SoC")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: armada-xp: Fix assigned-addresses for every PCIe Root Port

[ Upstream commit eab276787f456cbea89fabea110fe0728673d308 ]

BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.

Fixes: 9d8f44f02d4a ("arm: mvebu: add PCIe Device Tree informations for Armada XP")
Fixes: 12b69a599745 ("ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable")
Fixes: 2163e61c92d9 ("ARM: mvebu: fix second and third PCIe unit of Armada XP mv78260")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: armada-370: Fix assigned-addresses for every PCIe Root Port

[ Upstream commit d9208b0fa2e803d16b28d91bf1d46b7ee9ea13c6 ]

BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.

Fixes: a09a0b7c6ff1 ("arm: mvebu: add PCIe Device Tree informations for Armada 370")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: dove: Fix assigned-addresses for every PCIe Root Port

[ Upstream commit dcc7d8c72b64a479b8017e4332d99179deb8802d ]

BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.

Fixes: 74ecaa403a74 ("ARM: dove: add PCIe controllers to SoC DT")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mt7986: move wed_pcie node

[ Upstream commit 99cce13b82a9366cfdd230ba6ddb48ba30d2741f ]

Move the wed_pcie node to have node aligned by address.

Fixes: 00b9903996b3 ("arm64: dts: mediatek: mt7986: add support for Wireless Ethernet Dispatch")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221118190126.100895-2-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: tegra: Fix non-prefetchable aperture of PCIe C3 controller

[ Upstream commit 47a2f35d9ea76d92aa2385671f527b75aa9dfe45 ]

Fix the starting address of the non-prefetchable aperture of PCIe C3
controller.

Fixes: ec142c44b026 ("arm64: tegra: Add P2U and PCIe controller nodes to Tegra234 DT")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: tegra: Fix Prefetchable aperture ranges of Tegra234 PCIe controllers

[ Upstream commit 248400656b1cd85de37f3742d065dc1826cdf589 ]

commit edf408b946d3 ("PCI: dwc: Validate iATU outbound mappings against
hardware constraints") exposes an issue with the existing partitioning of
the aperture space where the Prefetchable apertures of controllers
C5, C7 and C9 in Tegra234 cross the 32GB boundary hardware constraint.
This patch makes sure that the Prefetchable region doesn't spill over
the 32GB boundary.

Fixes: ec142c44b026 ("arm64: tegra: Add P2U and PCIe controller nodes to Tegra234 DT")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mediatek: mt6797: Fix 26M oscillator unit name

[ Upstream commit 5f535cc583759c9c60d4cc9b8d221762e2d75387 ]

Update its unit name to oscillator-26m and remove the unneeded unit
address to fix a unit_address_vs_reg warning.

Fixes: 464c510f60c6 ("arm64: dts: mediatek: add mt6797 support")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-9-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mediatek: pumpkin-common: Fix devicetree warnings

[ Upstream commit 509438336ce75c8b4e6ce8e8d507dc77d0783bdd ]

Fix the pinctrl submodes and optee node to remove unneeded unit address,
fixing all unit_address_vs_reg warnings.

Fixes: 9983822c8cf9 ("arm64: dts: mediatek: add pumpkin board dts")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-8-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mt2712-evb: Fix usb vbus regulators unit names

[ Upstream commit ec1ae39a8d25cfb067b5459fac7c5b7b9bce6f6a ]

Update the names to regulator-usb-p{0-3}-vbus to fix unit_address_vs_reg
warnings for those.

Fixes: 1724f4cc5133 ("arm64: dts: Add USB3 related nodes for MT2712")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-7-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mt2712-evb: Fix vproc fixed regulators unit names

[ Upstream commit 377063156893bf6c088309ac799fe5c6dce2822d ]

Update the names to regulator-vproc-buck{0,1} to fix unit_addres_vs_reg
warnings for those.

Fixes: f75dd8bdd344 ("arm64: dts: mediatek: add mt2712 cpufreq related device nodes")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mt2712e: Fix unit address for pinctrl node

[ Upstream commit 1d4516f53a611b362db7ba7a8889923d469f57e1 ]

The unit address for the pinctrl node is (0x)1000b000 and not
(0x)10005000, which is the syscfg_pctl_a address instead.

This fixes the following warning:
arch/arm64/boot/dts/mediatek/mt2712e.dtsi:264.40-267.4: Warning
(unique_unit_address): /syscfg_pctl_a@10005000: duplicate
unit-address (also used in node /pinctrl@10005000)

Fixes: f0c64340b748 ("arm64: dts: mt2712: add pintcrl device node.")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mt2712e: Fix unit_address_vs_reg warning for oscillators

[ Upstream commit e4495a0a8b3d84816c9a46edf3ce060bbf267475 ]

Rename the fixed-clock oscillators to remove the unit address.

This solves unit_address_vs_reg warnings.

Fixes: 5d4839709c8e ("arm64: dts: mt2712: Add clock controller device nodes")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mt6779: Fix devicetree build warnings

[ Upstream commit 4d759c524c15dc4151e40b9e3f368147fda7b789 ]

Rename fixed-clock oscillators to oscillator-26m and oscillator-32k
and remove the unit address to fix the unit_address_vs_reg warning;
fix the unit address for interrupt and intpol controllers by
removing a leading zero in their unit address.

This commit fixes the following warnings:

(unit_address_vs_reg): /oscillator@0: node has a unit name, but
no reg or ranges property
(unit_address_vs_reg): /oscillator@1: node has a unit name, but
no reg or ranges property
(simple_bus_reg): /soc/interrupt-controller@0c000000: simple-bus
unit address format error, expected "c000000"
(simple_bus_reg): /soc/intpol-controller@0c53a650: simple-bus
unit address format error, expected "c53a650"

Fixes: 4c7a6260775d ("arm64: dts: add dts nodes for MT6779")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mt7896a: Fix unit_address_vs_reg warning for oscillator

[ Upstream commit 7898d047b1eb2bec2622668cd70181442a580c6d ]

Rename the oscillator fixed-clock to oscillator-40m and remove
the unit address to fix warnings.

arch/arm64/boot/dts/mediatek/mt7986a.dtsi:17.23-22.4: Warning
(unit_address_vs_reg): /oscillator@0: node has a unit name,
but no reg or ranges property

Fixes: 1f9986b258c2 ("arm64: dts: mediatek: add clock support for mt7986a")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mediatek: mt8195: Fix CPUs capacity-dmips-mhz

[ Upstream commit 513c43328b189874fdfee3ae99cac81e5502e7f7 ]

The capacity-dmips-mhz parameter was miscalculated: this SoC runs
the first (Cortex-A55) cluster at a maximum of 2000MHz and the
second (Cortex-A78) cluster at a maximum of 3000MHz.

In order to calculate the right capacity-dmips-mhz, the following
test was performed:
1. CPUFREQ governor was set to 'performance' on both clusters
2. Ran dhrystone with 500000000 iterations for 10 times on each cluster
3. Calculate the mean result for each cluster
4. Calculate DMIPS/MHz: dmips_mhz = dmips_per_second / cpu_mhz
5. Scale results to 1024:
result_c0 = (dmips_mhz_c0 - min_dmips_mhz(c0, c1)) /
(max_dmips_mhz(c0, c1) - min_dmips_mhz(c0, c1)) * 1024

The mean results for this SoC are:
Cluster 0 (LITTLE): 11990400 Dhry/s
Cluster 1 (BIG): 59809036 Dhry/s

The calculated scaled results are:
Cluster 0: 307,934312801831 (rounded to 308)
Cluster 1: 1024

Fixes: 37f2582883be ("arm64: dts: Add mediatek SoC mt8195 and evaluation board")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221005093404.33102-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: nuvoton: Remove bogus unit addresses from fixed-partition nodes

[ Upstream commit ea3ce4cf076ba11bb591c8013c5315136cae52c8 ]

The unit addresses do not correspond to the nodes' reg properties,
because they don't have any.

Fixes: e42b650f828d ("ARM: dts: nuvoton: Add new device nodes to NPCM750 EVB")
Fixes: ee33e2fb3d70 ("ARM: dts: nuvoton: Add Quanta GBS BMC Device Tree")
Fixes: 59f5abe09f0a ("ARM: dts: nuvoton: Add Quanta GSJ BMC")
Fixes: 14579c76f5ca ("ARM: dts: nuvoton: Add Fii Kudo system")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20221031221553.163273-1-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: dts: microchip: remove pcie node from the sev kit

[ Upstream commit 1150f4cff831e1d7db673417bcb81833d6544cf8 ]

The SEV kit reference design does not hook up the PCIe root port to the
core complex including it is misleading.
The entry is a re-use mistake - I was not aware of this when I moved
the PCIe node out of mpfs.dtsi so that individual bistreams could
connect it to different fics etc.

The node is disabled, so there should be no functional change here.

Fixes: 978a17d1a688 ("riscv: dts: microchip: add sevkit device tree")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: k3-j721s2: Fix the interrupt ranges property for main & wkup gpio intr

[ Upstream commit b8aa36c22da7d64c5a5d89ccb4a2abb9aeaab2e3 ]

The parent's input irq number is wrongly subtracted with 32 instead of
using the exact numbers in:

https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/j721s2/interrupt_cfg.html

The GPIO interrupts are not working because of that. The toggling works
fine but interrupts are not firing. Fix the parent's input irq that
specifies the base for parent irq.

Tested for MAIN_GPIO0_6 interrupt on the j721s2 EVM.

Fixes: b8545f9d3a54 ("arm64: dts: ti: Add initial support for J721S2 SoC")
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Vaishnav Achath <vaishnav.a@ti.com>
Link: https://lore.kernel.org/r/20220922072950.9157-1-j-keerthy@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: k3-j7200-mcu-wakeup: Drop dma-coherent in crypto node

[ Upstream commit f00f26711d7183f8675c5591ba8daaabe94be452 ]

crypto driver itself is not dma-coherent. So drop it.

Fixes: d683a73980a6 ("arm64: dts: ti: k3-j7200-mcu-wakeup: Add SA2UL node")
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20221031152520.355653-4-j-choudhary@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: k3-j721e-main: Drop dma-coherent in crypto node

[ Upstream commit 26c5012403f3f1fd3bf8f7d3389ee539ae5cc162 ]

crypto driver itself is not dma-coherent. So drop it.

Fixes: 8ebcaaae8017 ("arm64: dts: ti: k3-j721e-main: Add crypto accelerator node")
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20221031152520.355653-3-j-choudhary@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: k3-am65-main: Drop dma-coherent in crypto node

[ Upstream commit b86833ab3653dbb0dc453eec4eef8615e63de4e2 ]

crypto driver itself is not dma-coherent. So drop it.

Fixes: b366b2409c97 ("arm64: dts: ti: k3-am6: Add crypto accelarator node")
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20221031152520.355653-2-j-choudhary@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/smmuv3: Fix hotplug callback leak in arm_smmu_pmu_init()

[ Upstream commit 6f2d566b46436a50a80d6445e82879686b89588c ]

arm_smmu_pmu_init() won't remove the callback added by
cpuhp_setup_state_multi() when platform_driver_register() failed. Remove
the callback by cpuhp_remove_multi_state() in fail path.

Similar to the handling of arm_ccn_init() in commit 26242b330093 ("bus:
arm-ccn: Prevent hotplug callback leak")

Fixes: 7d839b4b9e00 ("perf/smmuv3: Add arm64 smmuv3 pmu driver")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com>
Link: https://lore.kernel.org/r/20221115115540.6245-3-shangxiaojing@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/arm_dmc620: Fix hotplug callback leak in dmc620_pmu_init()

[ Upstream commit d9f564c966e63925aac4ba273a9319d7fb6f4b4e ]

dmc620_pmu_init() won't remove the callback added by
cpuhp_setup_state_multi() when platform_driver_register() failed. Remove
the callback by cpuhp_remove_multi_state() in fail path.

Similar to the handling of arm_ccn_init() in commit 26242b330093 ("bus:
arm-ccn: Prevent hotplug callback leak")

Fixes: 53c218da220c ("driver/perf: Add PMU driver for the ARM DMC-620 memory controller")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com>
Link: https://lore.kernel.org/r/20221115115540.6245-2-shangxiaojing@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: perf: marvell_cn10k: Fix hotplug callback leak in tad_pmu_init()

[ Upstream commit 973ae93d80d9d262f695eb485a1902b74c4b9098 ]

tad_pmu_init() won't remove the callback added by cpuhp_setup_state_multi()
when platform_driver_register() failed. Remove the callback by
cpuhp_remove_multi_state() in fail path.

Similar to the handling of arm_ccn_init() in commit 26242b330093 ("bus:
arm-ccn: Prevent hotplug callback leak")

Fixes: 036a7584bede ("drivers: perf: Add LLC-TAD perf counter support")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221115070207.32634-3-yuancan@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf: arm_dsu: Fix hotplug callback leak in dsu_pmu_init()

[ Upstream commit facafab7611f7b872c6b9eeaff53461ef11f482e ]

dsu_pmu_init() won't remove the callback added by cpuhp_setup_state_multi()
when platform_driver_register() failed. Remove the callback by
cpuhp_remove_multi_state() in fail path.

Similar to the handling of arm_ccn_init() in commit 26242b330093 ("bus:
arm-ccn: Prevent hotplug callback leak")

Fixes: 7520fa99246d ("perf: ARM DynamIQ Shared Unit PMU support")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20221115070207.32634-2-yuancan@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: mm: kfence: only handle translation faults

[ Upstream commit 0bb1fbffc631064db567ccaeb9ed6b6df6342b66 ]

Alexander noted that KFENCE only expects to handle faults from invalid page
table entries (i.e. translation faults), but arm64's fault handling logic will
call kfence_handle_page_fault() for other types of faults, including alignment
faults caused by unaligned atomics. This has the unfortunate property of
causing those other faults to be reported as "KFENCE: use-after-free",
which is misleading and hinders debugging.

Fix this by only forwarding unhandled translation faults to the KFENCE
code, similar to what x86 does already.

Alexander has verified that this passes all the tests in the KFENCE test
suite and avoids bogus reports on misaligned atomics.

Link: https://lore.kernel.org/all/20221102081620.1465154-1-zhongbaisong@huawei.com/
Fixes: 840b23986344 ("arm64, kfence: enable KFENCE for ARM64")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221114104411.2853040-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: ti: smartreflex: Fix PM disable depth imbalance in omap_sr_probe

[ Upstream commit 69460e68eb662064ab4188d4e129ff31c1f23ed9 ]

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context.

Fixes: 984aa6dbf4ca ("OMAP3: PM: Adding smartreflex driver support.")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20221108080322.52268-3-zhangqilong3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: ti: knav_qmss_queue: Fix PM disable depth imbalance in knav_queue_probe

[ Upstream commit e961c0f19450fd4a26bd043dd2979990bf12caf6 ]

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context.

Fixes: 41f93af900a2 ("soc: ti: add Keystone Navigator QMSS driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20221108080322.52268-2-zhangqilong3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: dts: microchip: fix the icicle's #pwm-cells

[ Upstream commit bdd28ab35c163553a2a686fdc5ea3cf247aad69b ]

\#pwm-cells for the Icicle kit's fabric PWM was incorrectly set to 2 &
blindly overridden by the (out of tree) driver anyway. The core can
support inverted operation, so update the entry to correctly report its
capabilities.

Fixes: 72560c6559b8 ("riscv: dts: microchip: add fpga fabric section to icicle kit")
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm: dts: spear600: Fix clcd interrupt

[ Upstream commit 0336e2ce34e7a89832b6c214f924eb7bc58940be ]

Interrupt 12 of the Interrupt controller belongs to the SMI controller,
the right one for the display controller is the interrupt 13.

Fixes: 8113ba917dfa ("ARM: SPEAr: DT: Update device nodes")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sc7280: Mark all Qualcomm reference boards as LTE

[ Upstream commit 3c800bcf07a5957da01593e8f83d797b285a37e0 ]

When the modem node was re-located to a separate LTE source file
"sc7280-herobrine-lte-sku.dtsi", some of the previous LTE users
weren't marked appropriately. Fix this by marking all Qualcomm
reference devices as LTE.

Suggested-by: Douglas Anderson <dianders@chromium.org>
Fixes: d42fae738f3a ("arm64: dts: qcom: Add LTE SKUs for sc7280-villager family")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110070813.1777-1-quic_sibis@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc/tegra: cbb: Check firewall before enabling error reporting

[ Upstream commit 2927cf85f4877f417f884919de8e04ab9b362d32 ]

To enable error reporting for a fabric to CCPLEX, we need to write its
register for enabling error interrupt to CCPLEX during boot and later
clear the error status register after error occurs. If a fabric's
registers are protected and not accessible from CCPLEX, then accessing
the registers will cause CBB firewall error.

Add support to check whether write access from CCPLEX to the registers
of a fabric is not blocked by it's firewall before enabling error
reporting to CCPLEX for that fabric.

Fixes: fc2f151d2314 ("soc/tegra: cbb: Add driver for Tegra234 CBB 2.0")
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc/tegra: cbb: Add checks for potential out of bound errors

[ Upstream commit 55084947d6b48977c5122fbe443743a6c50c12bf ]

Added checks to avoid potential out of bounds errors which can happen if
the 'slave map' and 'CBB errors' arrays are not correct or latest where
some entries are missing.

Fixes: fc2f151d2314 ("soc/tegra: cbb: Add driver for Tegra234 CBB 2.0")
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc/tegra: cbb: Update slave maps for Tegra234

[ Upstream commit cd1d719b47767f1970d02d18661122b649c35b00 ]

Updating the slave map for fabrics and using the same maps for DCE, RCE
and SCE as they all are a replica in Tegra234.

Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Stable-dep-of: 55084947d6b4 ("soc/tegra: cbb: Add checks for potential out of bound errors")
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc/tegra: cbb: Use correct master_id mask for CBB NOC in Tegra194

[ Upstream commit 33af51a652191d7b9fe449563594b0bdbeb93c2a ]

In Tegra194 SoC, master_id bit range is different between cluster NOC
and CBB NOC. Currently same bit range is used which results in wrong
master_id value. Due to this, illegal accesses from the CCPLEX master
do not result in a crash as expected. Fix this by using the correct
range for the CBB NOC.

Finally, it is only necessary to extract the master_id when the
erd_mask_inband_err flag is set because when this is not set, a crash
is always triggered.

Fixes: b71344221466 ("soc/tegra: cbb: Add CBB 1.0 driver for Tegra194")
Fixes: fc2f151d2314 ("soc/tegra: cbb: Add driver for Tegra234 CBB 2.0")
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mt7986: fix trng node name

[ Upstream commit 07ce611c705217507c2a036bba8695cbd82c9e36 ]

Binding requires node name to be rng not trng:

trng@1020f000: $nodename:0: 'trng@1020f000' does not match '^rng@[0-9a-f]+$'

Fixes: 50137c150f5f ("arm64: dts: mediatek: add basic mt7986 support")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221027151022.5541-1-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: sifive: ccache: fix missing of_node_put() in sifive_ccache_init()

[ Upstream commit 8fbf94fea0b4e187ca9100936c5429f96b8a4e44 ]

The device_node pointer returned by of_find_matching_node() with
refcount incremented, when finish using it, the refcount need be
decreased.

Fixes: a967a289f169 ("RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: sifive: ccache: fix missing free_irq() in error path in sifive_ccache_init()

[ Upstream commit 756344e7cb1afbb87da8705c20384dddd0dea233 ]

Add missing free_irq() before return error from sifive_ccache_init().

Fixes: a967a289f169 ("RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: sifive: ccache: fix missing iounmap() in error path in sifive_ccache_init()

[ Upstream commit 73e770f085023da327dc9ffeb6cd96b0bb22d97e ]

Add missing iounmap() before return error from sifive_ccache_init().

Fixes: a967a289f169 ("RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: pwm: fix microchip corePWM's pwm-cells

[ Upstream commit a62d196e89887c029d5aef409135f9a2a8667268 ]

corePWM is capable of inverted operation but the binding requires
\#pwm-cells of 2. Expand the binding to support setting the polarity.

Fixes: df77f7735786 ("dt-bindings: pwm: add microchip corepwm binding")
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: r9a09g011: Fix I2C SoC specific strings

[ Upstream commit 2ac909916b520df09a23f152bb9016d7b892b496 ]

The preferred form for Renesas' compatible strings is:
"<vendor>,<family>-<module>"

Somehow the compatible string for the r9a09g011 I2C IP was upstreamed
as renesas,i2c-r9a09g011 instead of renesas,r9a09g011-i2c, which
is really confusing, especially considering the generic fallback
is renesas,rzv2m-i2c.

The first user of renesas,i2c-r9a09g011 in the kernel is not yet in
a kernel release, it will be in v6.1, therefore it can still be
fixed in v6.1.
Even if we don't fix it before v6.2, I don't think there is any
harm in making such a change.

s/renesas,i2c-r9a09g011/renesas,r9a09g011-i2c/g for consistency.

Fixes: 54ac6794df9d ("arm64: dts: renesas: r9a09g011: Add i2c nodes")
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/20221107165027.54150-3-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: r9a09g011: Fix unit address format error

[ Upstream commit 278f5015a3deaa2ea0db6070bbc2a8edf2455643 ]

Although the HW User Manual for RZ/V2M states in the "Address Map"
section that the interrupt controller is assigned addresses starting
from 0x82000000, the memory locations from 0x82000000 0x0x8200FFFF
are marked as reserved in the "Interrupt Controller (GIC)" section
and are currently not used by the device tree, leading to the below
warning:

arch/arm64/boot/dts/renesas/r9a09g011.dtsi:51.38-63.5: Warning
(simple_bus_reg): /soc/interrupt-controller@82000000: simple-bus unit
address format error, expected "82010000"

Fix the unit address accordingly.

Fixes: fb1929b98f2e ("arm64: dts: renesas: Add initial DTSI for RZ/V2M SoC")
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/20221103230648.53748-2-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: r8a779f0: Fix SCIF "brg_int" clock

[ Upstream commit 64416ef0b0c4d73349035d1b3206eed3d2047ee0 ]

As serial communication requires a clean clock signal, the Serial
Communication Interfaces with FIFO (SCIF) are clocked by a clock that is
not affected by Spread Spectrum or Fractional Multiplication.

Hence change the clock input for the SCIF Baud Rate Generator internal
clock from the S0D3_PER clock to the SASYNCPERD1 clock (which has the
same clock rate), cfr. R-Car S4-8 Hardware User's Manual rev. 0.81.

Fixes: c62331e8222f ("arm64: dts: renesas: Add Renesas R8A779F0 SoC support")
Fixes: 40753144256b ("arm64: dts: renesas: r8a779f0: Add SCIF nodes")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20221103143440.46449-5-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: r8a779f0: Fix HSCIF "brg_int" clock

[ Upstream commit a5101ef18b4d0751588f61d939694bad183cc240 ]

As serial communication requires a clean clock signal, the High Speed
Serial Communication Interfaces with FIFO (HSCIF) are clocked by a clock
that is not affected by Spread Spectrum or Fractional Multiplication.

Hence change the clock input for the HSCIF Baud Rate Generator internal
clock from the S0D3_PER clock to the SASYNCPERD1 clock (which has the
same clock rate), cfr. R-Car S4-8 Hardware User's Manual rev. 0.81.

Fixes: 01a787f78bfd ("arm64: dts: renesas: r8a779f0: Add HSCIF nodes")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20221103143440.46449-4-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm6125: fix SDHCI CQE reg names

[ Upstream commit 3de1172624b3c4ca65730bc34333ab493510b3e1 ]

SM6125 comes with SDCC (SDHCI controller) v5, so the second range of
registers is cqhci, not core.

Fixes: cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org> # Sony Xperia 10 II
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221026163646.37433-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: pm6350: Include header for KEY_POWER

[ Upstream commit f6e2d6914c7c095660a9c7c503328eebab1e2557 ]

Make pm6350.dtsi self-contained by including input.h, needed for the
KEY_POWER constant used to define the power key.

Fixes: d8a3c775d7cd ("arm64: dts: qcom: Add PM6350 PMIC")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221030073232.22726-5-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: apr: Add check for idr_alloc and of_property_read_string_index

[ Upstream commit 6d7860f5750d73da2fa1a1f6c9405058a593fa32 ]

As idr_alloc() and of_property_read_string_index() can return negative
numbers, it should be better to check the return value and deal with
the exception.
Therefore, it should be better to use goto statement to stop and return
error.

Fixes: 6adba21eb434 ("soc: qcom: Add APR bus driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107014403.3606-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm6350: drop bogus DP PHY clock

[ Upstream commit 95fade4016cbd57ee050ab226c8f0483af1753c4 ]

The QMP pipe clock is used by the USB part of the PHY so drop the
corresponding properties from the DP child node.

Fixes: 23737b9557fe ("arm64: dts: qcom: sm6350: Add USB1 nodes")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221026152511.9661-3-johan+linaro@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8250: drop bogus DP PHY clock

[ Upstream commit bb9f23e46ddcebe1bc68a43a0f7acfc1865a6472 ]

The QMP pipe clock is used by the USB part of the PHY so drop the
corresponding properties from the DP child node.

Fixes: 5aa0d1becd5b ("arm64: dts: qcom: sm8250: switch usb1 qmp phy to USB3+DP mode")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221026152511.9661-2-johan+linaro@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sc7280: fix codec reset line polarity for CRD 1.0/2.0

[ Upstream commit b8f298d4f69d82119ac0d22809a17c80b1f188d1 ]

The driver for the codec, when resetting the chip, first drives the line
low, and then high. This means that the line is active low. Change the
annotation in the DTS accordingly.

Fixes: f8b4eb64f200 ("arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0/2.0 and IDP boards")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221027074652.1044235-5-dmitry.torokhov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sc7280: fix codec reset line polarity for CRD 3.0/3.1

[ Upstream commit 1caf66104c02d327a2467a69ab18fb24b44e9715 ]

The driver for the codec, when resetting the chip, first drives the line
low, and then high. This means that the line is active low. Change the
annotation in the DTS accordingly.

Fixes: 0a3a56a93fd9 ("arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221027074652.1044235-4-dmitry.torokhov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8250-mtp: fix reset line polarity

[ Upstream commit 15d9fcbb3e6e8420c7d1ae331405780c5d9c1c25 ]

The driver for the codec, when resetting the chip, first drives the line
low, and then high. This means that the line is active low. Change the
annotation in the DTS accordingly.

Fixes: 36c9d012f193 ("arm64: dts: qcom: use GPIO flags for tlmm")
Fixes: 5a263cf629a8 ("arm64: dts: qcom: sm8250-mtp: Add wcd9380 audio codec node")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221027074652.1044235-3-dmitry.torokhov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8996: fix sound card reset line polarity

[ Upstream commit 76d21ffc5d425bf7ea9888652c49d7dbda15f356 ]

When resetting the block, the reset line is being driven low and then
high, which means that the line in DTS should be annotated as "active
low". It will become important when wcd9335 driver will be converted
to gpiod API that respects declared line polarities.

Fixes: f3eb39a55a1f ("arm64: dts: db820c: Add sound card support")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221027074652.1044235-1-dmitry.torokhov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8450: fix UFS PHY registers

[ Upstream commit 7af949211a0554bbc06163b081fc2cb516674880 ]

The sizes of the UFS PHY register regions are too small and does
specifically not cover all registers used by the Linux driver.

As Linux maps these regions as full pages this is currently not an issue
on Linux, but let's update the sizes to match the vendor driver.

Fixes: 07fa917a335e ("arm64: dts: qcom: sm8450: add ufs nodes")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221024091507.20342-5-johan+linaro@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8350: fix UFS PHY registers

[ Upstream commit b3c7839b698cc617e97dd2e4f1eeb4adc280fe58 ]

The sizes of the UFS PHY register regions are too small and does
specifically not cover all registers used by the Linux driver.

As Linux maps these regions as full pages this is currently not an issue
on Linux, but let's update the sizes to match the vendor driver.

Fixes: 59c7cf814783 ("arm64: dts: qcom: sm8350: Add UFS nodes")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221024091507.20342-4-johan+linaro@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8250: fix UFS PHY registers

[ Upstream commit 7f8b37dd4e7bf50160529530d9789b846153df71 ]

The sizes of the UFS PHY register regions are too small and does
specifically not cover all registers used by the Linux driver.

As Linux maps these regions as full pages this is currently not an issue
on Linux, but let's update the sizes to match the vendor driver.

Fixes: b7e2fba06622 ("arm64: dts: qcom: sm8250: Add UFS controller and PHY")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221024091507.20342-3-johan+linaro@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8150: fix UFS PHY registers

[ Upstream commit 36a31b3a8d9ba1707a23de8d8dc1ceaef4eda695 ]

The sizes of the UFS PHY register regions are too small and does
specifically not cover all registers used by the Linux driver.

As Linux maps these regions as full pages this is currently not an issue
on Linux, but let's update the sizes to match the vendor driver.

Fixes: 3834a2e92229 ("arm64: dts: qcom: sm8150: Add ufs nodes")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221024091507.20342-2-johan+linaro@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: llcc: make irq truly optional

[ Upstream commit c882c899ead3545102a4d71b5fbe73b9e4bc2657 ]

The function platform_get_irq prints an error message into the kernel
log when the irq isn't found.

Since the interrupt is actually optional and not provided by some SoCs,
use platform_get_irq_optional which does not print an error message.

Fixes: c081f3060fab ("soc: qcom: Add support to register LLCC EDAC driver")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221104153041.412020-1-luca.weiss@fairphone.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sc7180-trogdor-homestar: fully configure secondary I2S pins

[ Upstream commit 59e787935cfe6f562fbb9117e2df4076eaf810d8 ]

The Trogdor Homestar DTSI adds additional GPIO52 pin to secondary I2S pins
("sec_mi2s_active") and configures it to "mi2s_1" function.

The Trogdor DTSI (which is included by Homestar) configures drive
strength and bias for all "sec_mi2s_active" pins, thus the intention was
to apply this configuration also to GPIO52 on Homestar.

Reported-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Fixes: be0416a3f917 ("arm64: dts: qcom: Add sc7180-trogdor-homestar")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221020225135.31750-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8250: correct LPASS pin pull down

[ Upstream commit 195a0a11d66d6c696cbcf398d6bc3f3a3a462f7c ]

The pull-down property is actually bias-pull-down.

Fixes: 3160c1b894d9 ("arm64: dts: qcom: sm8250: add lpass lpi pin controller node")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220927153429.55365-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: pm660: Use unique ADC5_VCOIN address in node name

[ Upstream commit 02549ba5de0a09a27616496c3512db5af4ad7862 ]

The register address in the node name is shadowing vph_pwr@83, whereas
the ADC5_VCOIN register resolves to 0x85. Fix this copy-paste
discrepancy.

Fixes: 4bf097540506 ("arm64: dts: qcom: pm660: Add VADC and temp alarm nodes")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220926190148.283805-3-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: dts: microchip: fix memory node unit address for icicle

[ Upstream commit d6105a8b7c160a73ae04054c8921eba80a294146 ]

Evidently I forgot to update the unit address for the 38-bit cached
memory node when I changed the address in the reg property..
Update it to match.

Fixes: 6c1193301791 ("riscv: dts: microchip: update memory configuration for v2022.10")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: ti_sci: Fix polled mode during system suspend

[ Upstream commit b13b2c3e0e4d0854228b5217fa34e145f3ace8ac ]

Commit b9e8a7d950ff ("firmware: ti_sci: Switch transport to polled
mode during system suspend") uses read_poll_timeout_atomic() macro
in ti_sci_do_xfer() to wait for completion when the system is
suspending. The break condition of the macro is set to "true" which
will cause it break immediately when evaluated, likely before the
TISCI xfer is completed, and always return 0. We want to poll here
until "done_state == true".

1) Change the break condition of read_poll_timeout_atomic() to
the bool variable "done_state".

2) The read_poll_timeout_atomic() returns 0 if the break condition
is met or -ETIMEDOUT if not. Since our break condition has changed
to "done_state", we also don't have to check for "!done_state" when
evaluating the return value.

Fixes: b9e8a7d950ff ("firmware: ti_sci: Switch transport to polled mode during system suspend")

Signed-off-by: Georgi Vlaev <g-vlaev@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20221021185704.181316-1-g-vlaev@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: soc: ti: knav_qmss_queue: Mark knav_acc_firmwares as static

[ Upstream commit adf85adc2a7199b41e7a4da083bd17274a3d6969 ]

There is a sparse warning shown below:

drivers/soc/ti/knav_qmss_queue.c:70:12: warning: symbol
'knav_acc_firmwares' was not declared. Should it be static?

Since 'knav_acc_firmwares' is only called within knav_qmss_queue.c,
mark it as static to fix the warning.

Fixes: 96ee19becc3b ("soc: ti: add firmware file name as part of the driver")
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20221019153212.72350-1-chenjiahao16@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: Fix AV96 WLAN regulator gpio property

[ Upstream commit d5d577e3d50713ad11d98dbdaa48bb494346c26d ]

The WLAN regulator uses 'gpios' property instead of 'gpio' to specify
regulator enable GPIO. While the former is also currently handled by
the Linux kernel regulator-fixed driver, the later is the correct one
per DT bindings. Update the DT to use the later.

Fixes: 7dd5cbba42c93 ("ARM: dts: stm32: Enable WiFi on AV96")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: Drop stm32mp15xc.dtsi from Avenger96

[ Upstream commit 3b835f1b8acef53c8882b25f40f48d7f5982c938 ]

The Avenger96 is populated with STM32MP157A DHCOR SoM, drop the
stm32mp15xc.dtsi which should only be included in DTs of devices
which are populated with STM32MP15xC/F SoC as the stm32mp15xc.dtsi
enables CRYP block not present in the STM32MP15xA/D SoC .

Fixes: 7e76f82acd9e1 ("ARM: dts: stm32: Split Avenger96 into DHCOR SoM and Avenger96 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

objtool, kcsan: Add volatile read/write instrumentation to whitelist

[ Upstream commit 63646fcba5bb4b59a19031c21913f94e46a3d0d4 ]

Adds KCSAN's volatile instrumentation to objtool's uaccess whitelist.

Recent kernel change have shown that this was missing from the uaccess
whitelist (since the first upstreamed version of KCSAN):

mm/gup.o: warning: objtool: fault_in_readable+0x101: call to __tsan_volatile_write1() with UACCESS enabled

Fixes: 75d75b7a4d54 ("kcsan: Support distinguishing volatile accesses")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

memory: renesas-rpc-if: Clear HS bit during hardware initialization

[ Upstream commit 5192481f908e576be42bd39ec12979b79e11f7e0 ]

According to the datasheet, HS bit should be specified to 1 when using
DMA transfer. As DMA transfer is not supported, it should be cleared to
0.

Previously, the driver relied on the HS bit being cleared by prior
firmware but this is not always the case.

Fix this by ensuring the bit is cleared during hardware initialization.

Fixes: ca7d8b980b67 ("memory: add Renesas RPC-IF driver")
Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/08d9fb10b3051decebf871267a6e2e7cb2d4faf9.1665583089.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: fsd: fix drive strength values as per FSD HW UM

[ Upstream commit 21f6546e8bf68a847601e2710378e2224bf49704 ]

Drive strength values used for HSI2C, SPI and UART are not reflecting
the default values recommended by FSD HW UM.

Fixes: 684dac402f21 ("arm64: dts: fsd: Add initial pinctrl support")
Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20221013104024.50179-3-p.rajanbabu@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: fsd: fix drive strength macros as per FSD HW UM

[ Upstream commit 574d6c59daefb51729b0640465f007f6c9600358 ]

Drive strength macros defined for FSD platform is not reflecting actual
names and values as per HW UM. FSD SoC pinctrl has following four levels
of drive-strength and their corresponding values:
Level-1 <-> 0
Level-2 <-> 1
Level-4 <-> 2
Level-6 <-> 3

The commit 684dac402f21 ("arm64: dts: fsd: Add initial pinctrl support")
used drive strength macros defined for Exynos4 SoC family. For some IPs
the macros values of Exynos4 matched and worked well, but Exynos4 SoC
family drive-strength (names and values) is not exactly matching with
FSD SoC.

Fix the drive strength macros to reflect actual names and values given
in FSD HW UM.

Fixes: 684dac402f21 ("arm64: dts: fsd: Add initial pinctrl support")
Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20221013104024.50179-2-p.rajanbabu@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8916: Drop MSS fallback compatible

[ Upstream commit ff02ac621634e82c0c34d02a79d402ae700cdfd0 ]

MSM8916 was originally using the "qcom,q6v5-pil" compatible for the
MSS remoteproc. Later it was decided to use SoC-specific compatibles
instead, so "qcom,msm8916-mss-pil" is now the preferred compatible.

Commit 60a05ed059a0 ("arm64: dts: qcom: msm8916: Add MSM8916-specific
compatibles to SCM/MSS") updated the MSM8916 device tree to make use of
the new compatible but still kept the old "qcom,q6v5-pil" as fallback.

This is inconsistent with other SoCs and conflicts with the description
in the binding documentation (which says that only one compatible should
be present). Also, it has no functional advantage since older kernels
could not handle this DT anyway (e.g. "power-domains" in the MSS node is
only supported by kernels that also support "qcom,msm8916-mss-pil").

Make this consistent with other SoCs by using only the
"qcom,msm8916-mss-pil" compatible.

Fixes: 60a05ed059a0 ("arm64: dts: qcom: msm8916: Add MSM8916-specific compatibles to SCM/MSS")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220718140344.1831731-2-stephan.gerhold@kernkonzept.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sdm845-cheza: fix AP suspend pin bias

[ Upstream commit 9bce41fab14da8f21027dc9847535ef5e22cbe8b ]

There is no "bias-no-pull" property. Assume intentions were disabling
bias.

Fixes: 79e7739f7b87 ("arm64: dts: qcom: sdm845-cheza: add initial cheza dt")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221010114417.29859-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sdm630: fix UART1 pin bias

[ Upstream commit 780f836fe071a9e8703fe6a05ae00129acf83391 ]

There is no "bias-no-pull" property. Assume intentions were disabling
bias.

Fixes: b190fb010664 ("arm64: dts: qcom: sdm630: Add sdm630 dts file")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221010114417.29859-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: qcom: apq8064: fix coresight compatible

[ Upstream commit a42b1ee868361f1cb0492f1bdaefb43e0751e468 ]

There's a typo missing the arm, prefix of arm,coresight-etb10. Fix it to
make devicetree validation happier.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Fixes: 7a5c275fd821 ("ARM: dts: qcom: Add apq8064 CoreSight components")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221013190657.48499-3-luca@z3ntu.xyz
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8996: fix GPU OPP table

[ Upstream commit 0d440d811e6e2f37093e54db55bc27fe66678170 ]

Fix Adreno OPP table according to the msm-3.18. Enable 624 MHz for the
speed bin 3 and 560 MHz for bins 2 and 3.

Fixes: 69cc3114ab0f ("arm64: dts: Add Adreno GPU definitions")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724140421.1933004-7-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8996: fix supported-hw in cpufreq OPP tables

[ Upstream commit 0154caaa2b748e7414a4ec3c6ee60e8f483b2d4f ]

Adjust MSM8996 cpufreq tables according to tables in msm-3.18. Some of
the frequencies are not supported on speed bins other than 0. Also other
speed bins support intermediate topmost frequencies, not supported on
speed bin 0. Implement all these differencies.

Fixes: 90173a954a22 ("arm64: dts: qcom: msm8996: Add CPU opps")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724140421.1933004-5-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8996: Add MSM8996 Pro support

[ Upstream commit 8898c9748a872866f8c2973e719b26bf7c6ab64e ]

Qualcomm MSM8996 Pro is a variant of MSM8996 with higher frequencies
supported both on CPU and GPU. There are other minor hardware
differencies in the CPU and GPU regulators and bus fabrics.

However this results in significant differences between 8996 and 8996
Pro CPU OPP tables. Judging from msm-3.18 there are only few common
frequencies supported by both msm8996 and msm8996pro. Rather than
hacking the tables for msm8996, split msm8996pro support into a separate
file. Later this would allow having additional customizations for the
CBF, CPR, retulators, etc.

[DB: dropped all non-CPU-OPP changes]

Fixes: 90173a954a22 ("arm64: dts: qcom: msm8996: Add CPU opps")
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
[DB: Realigned supported-hw to keep compat with current cpufreq driver]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724140421.1933004-3-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sdm845-xiaomi-polaris: fix codec pin conf name

[ Upstream commit 58c4a0b6f4bdf8c3c2b4aad7f980e4019cc0fc83 ]

Fix typo in the codec's pin name to be configured. Mismatched name
caused the pin configuration to be ignored.

Fixes: be497abe19bf ("arm64: dts: qcom: Add support for Xiaomi Mi Mix2s")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Molly Sophia <mollysophia379@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930192039.240486-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8250-sony-xperia-edo: fix touchscreen bias-disable

[ Upstream commit 7ff4a646fae3697b039c6b684786a1e309e8445c ]

The property to disable bias is "bias-disable".

Fixes: e76c7e1f15fe ("arm64: dts: qcom: sm8250-edo: Add Samsung touchscreen")
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930192954.242546-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: ipq6018-cp01-c1: use BLSPI1 pins

[ Upstream commit 4871d3c38893c8a585e3e96364b7fb91cda8322e ]

When BLSPI1 (originally SPI0, later renamed in commit f82c48d46852
("arm64: dts: qcom: ipq6018: correct QUP peripheral labels")) was added,
the device node lacked respective pin configuration assignment.

Fixes: 5bf635621245 ("arm64: dts: ipq6018: Add a few device nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221006124659.217540-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: r8a779g0: Fix HSCIF0 "brg_int" clock

[ Upstream commit a4290d407aa9fd174d8053878783d466d3124e38 ]

As serial communication requires a clock signal, the High Speed Serial
Communication Interfaces with FIFO (HSCIF) are clocked by a clock that
is not affected by Spread Spectrum or Fractional Multiplication.

Hence change the clock input for the HSCIF0 Baud Rate Generator internal
clock from the S0D3_PER clock to the SASYNCPERD1 clock (which has the
same clock rate), cfr. R-Car V4H Hardware User's Manual rev. 0.54.

Fixes: 987da486d84a5643 ("arm64: dts: renesas: Add Renesas R8A779G0 SoC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/a5bd4148f92806f7c8e577d383370f810315f586.1665155947.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: musb: remove extra check in musb_gadget_vbus_draw

[ Upstream commit ecec4b20d29c3d6922dafe7d2555254a454272d2 ]

The checks for musb->xceiv and musb->xceiv->set_power duplicate those in
usb_phy_set_power(), so there is no need of them. Moreover, not calling
usb_phy_set_power() results in usb_phy_set_charger_current() not being
called, so current USB config max current is not propagated through USB
charger framework and charger drivers may try to draw more current than
allowed or possible.

Fix that by removing those extra checks and calling usb_phy_set_power()
directly.

Tested on Motorola Droid4 and Nokia N900

Fixes: a9081a008f84 ("usb: phy: Add USB charger support")
Cc: stable <stable@kernel.org>
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Link: https://lore.kernel.org/r/1669400475-4762-1-git-send-email-ivo.g.dimitrov.75@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: DTS: CI20: fix reset line polarity of the ethernet controller

commit ca637c0ece144ce62ec8ef75dc127bcccd4f442a upstream.

The reset line is called PWRST#, annotated as "active low" in the
binding documentation, and is driven low and then high by the driver to
reset the chip. However in device tree for CI20 board it was incorrectly
marked as "active high". Fix it.

Because (as far as I know) the ci20.dts is always built in the kernel I
elected not to also add a quirk to gpiolib to force the polarity there.

Fixes: db49ca38579d ("net: davicom: dm9000: switch to using gpiod API")
Reported-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 6.1.1

Link: https://lore.kernel.org/r/20221219182943.395169070@linuxfoundation.org
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Slade Watkins <srw@sladewatkins.net>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KEYS: encrypted: fix key instantiation with user-provided data

commit 5adedd42245af0860ebda8fe0949f24f5204c1b1 upstream.

Commit cd3bc044af48 ("KEYS: encrypted: Instantiate key with
user-provided decrypted data") added key instantiation with user
provided decrypted data. The user data is hex-ascii-encoded but was
just memcpy'ed to the binary buffer. Fix this to use hex2bin instead.

Old keys created from user provided decrypted data saved with "keyctl
pipe" are still valid, however if the key is recreated from decrypted
data the old key must be converted to the correct format. This can be
done with a small shell script, e.g.:

BROKENKEY=abcdefABCDEF1234567890aaaaaaaaaa
NEWKEY=$(echo -ne $BROKENKEY | xxd -p -c32)
keyctl add user masterkey "$(cat masterkey.bin)" @u
keyctl add encrypted testkey "new user:masterkey 32 $NEWKEY" @u

However, NEWKEY is still broken: If for BROKENKEY 32 bytes were
specified, a brute force attacker knowing the key properties would only
need to try at most 2^(16*8) keys, as if the key was only 16 bytes long.

The security issue is a result of the combination of limiting the input
range to hex-ascii and using memcpy() instead of hex2bin(). It could
have been fixed either by allowing binary input or using hex2bin() (and
doubling the ascii input key length). This patch implements the latter.

The corresponding test for the Linux Test Project ltp has also been
fixed (see link below).

Fixes: cd3bc044af48 ("KEYS: encrypted: Instantiate key with user-provided decrypted data")
Cc: stable@kernel.org
Link: https://lore.kernel.org/ltp/20221006081709.92303897@mail.steuer-voss.de/
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Nikolaus Voss <nikolaus.voss@haag-streit.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>