review.tizen.org Git - platform/kernel/linux-starfive.git/log

mlxsw: spectrum_router: Prevent incorrect replacement of local table routes

The driver uses the same table to represent both the main and local
routing tables. Prevent routes in the main table from replacing routes
in the local table to reflect the fact that the local table is consulted
first during lookup.

Fixes: b6a1d871d37a ("mlxsw: spectrum_router: Start using new IPv4 route notifications")
Fixes: dacad7b34b59 ("mlxsw: spectrum_router: Start using new IPv6 route notifications")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: microchip: enable module autoprobe

This matches /sys/devices/.../spi1.0/modalias content.

Fixes: 9b2d9f05cddf ("net: dsa: microchip: add ksz9567 to ksz9477 driver")
Fixes: d9033ae95cf4 ("net: dsa: microchip: add KSZ8563 compatibility string")
Fixes: 8c29bebb1f8a ("net: dsa: microchip: add KSZ9893 switch support")
Fixes: 45316818371d ("net: dsa: add support for ksz9897 ethernet switch")
Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6/addrconf: fix potential NULL deref in inet6_set_link_af()

__in6_dev_get(dev) called from inet6_set_link_af() can return NULL.

The needed check has been recently removed, let's add it back.

While do_setlink() does call validate_linkmsg() :
...
err = validate_linkmsg(dev, tb); /* OK at this point */
...

It is possible that the following call happening before the
->set_link_af() removes IPv6 if MTU is less than 1280 :

if (tb[IFLA_MTU]) {
    err = dev_set_mtu_ext(dev, nla_get_u32(tb[IFLA_MTU]), extack);
    if (err < 0)
          goto errout;
    status |= DO_SETLINK_MODIFIED;
}
...

if (tb[IFLA_AF_SPEC]) {
   ...
   err = af_ops->set_link_af(dev, af);
      ->inet6_set_link_af() // CRASH because idev is NULL

Please note that IPv4 is immune to the bug since inet_set_link_af() does :

struct in_device *in_dev = __in_dev_get_rcu(dev);
if (!in_dev)
    return -EAFNOSUPPORT;

This problem has been mentioned in commit cf7afbfeb8ce ("rtnl: make
link af-specific updates atomic") changelog :

    This method is not fail proof, while it is currently sufficient
    to make set_link_af() inerrable and thus 100% atomic, the
    validation function method will not be able to detect all error
    scenarios in the future, there will likely always be errors
    depending on states which are f.e. not protected by rtnl_mutex
    and thus may change between validation and setting.

IPv6: ADDRCONF(NETDEV_CHANGE): lo: link becomes ready
general protection fault, probably for non-canonical address 0xdffffc0000000056: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000002b0-0x00000000000002b7]
CPU: 0 PID: 9698 Comm: syz-executor712 Not tainted 5.5.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:inet6_set_link_af+0x66e/0xae0 net/ipv6/addrconf.c:5733
Code: 38 d0 7f 08 84 c0 0f 85 20 03 00 00 48 8d bb b0 02 00 00 45 0f b6 64 24 04 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 1a 03 00 00 44 89 a3 b0 02 00
RSP: 0018:ffffc90005b06d40 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff86df39a6
RDX: 0000000000000056 RSI: ffffffff86df3e74 RDI: 00000000000002b0
RBP: ffffc90005b06e70 R08: ffff8880a2ac0380 R09: ffffc90005b06db0
R10: fffff52000b60dbe R11: ffffc90005b06df7 R12: 0000000000000000
R13: 0000000000000000 R14: ffff8880a1fcc424 R15: dffffc0000000000
FS:  0000000000c46880(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f0494ca0d0 CR3: 000000009e4ac000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
do_setlink+0x2a9f/0x3720 net/core/rtnetlink.c:2754
rtnl_group_changelink net/core/rtnetlink.c:3103 [inline]
__rtnl_newlink+0xdd1/0x1790 net/core/rtnetlink.c:3257
rtnl_newlink+0x69/0xa0 net/core/rtnetlink.c:3377
rtnetlink_rcv_msg+0x45e/0xaf0 net/core/rtnetlink.c:5438
netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5456
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:672
____sys_sendmsg+0x753/0x880 net/socket.c:2343
___sys_sendmsg+0x100/0x170 net/socket.c:2397
__sys_sendmsg+0x105/0x1d0 net/socket.c:2430
__do_sys_sendmsg net/socket.c:2439 [inline]
__se_sys_sendmsg net/socket.c:2437 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2437
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4402e9
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fffd62fbcf8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004402e9
RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 0000000000000008 R09: 00000000004002c8
R10: 0000000000000005 R11: 0000000000000246 R12: 0000000000401b70
R13: 0000000000401c00 R14: 0000000000000000 R15: 0000000000000000
Modules linked in:
---[ end trace cfa7664b8fdcdff3 ]---
RIP: 0010:inet6_set_link_af+0x66e/0xae0 net/ipv6/addrconf.c:5733
Code: 38 d0 7f 08 84 c0 0f 85 20 03 00 00 48 8d bb b0 02 00 00 45 0f b6 64 24 04 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 1a 03 00 00 44 89 a3 b0 02 00
RSP: 0018:ffffc90005b06d40 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff86df39a6
RDX: 0000000000000056 RSI: ffffffff86df3e74 RDI: 00000000000002b0
RBP: ffffc90005b06e70 R08: ffff8880a2ac0380 R09: ffffc90005b06db0
R10: fffff52000b60dbe R11: ffffc90005b06df7 R12: 0000000000000000
R13: 0000000000000000 R14: ffff8880a1fcc424 R15: dffffc0000000000
FS:  0000000000c46880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000004 CR3: 000000009e4ac000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fixes: 7dc2bccab0ee ("Validate required parameters in inet6_validate_link_af")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Bisected-and-reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dpaa_eth: support all modes with rate adapting PHYs

Stop removing modes that are not supported on the system interface
when the connected PHY is capable of rate adaptation. This addresses
an issue with the LS1046ARDB board 10G interface no longer working
with an 1G link partner after autonegotiation support was added
for the Aquantia PHY on board in

commit 09c4c57f7bc4 ("net: phy: aquantia: add support for auto-negotiation configuration")

Before this commit the values advertised by the PHY were not
influenced by the dpaa_eth driver removal of system-side unsupported
modes as the aqr_config_aneg() was basically a no-op. After this
commit, the modes removed by the dpaa_eth driver were no longer
advertised thus autonegotiation with 1G link partners failed.

Reported-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'stmmac-fixes'

Ong Boon Leong says:

====================
net: stmmac: general fixes for Ethernet functionality

1/5: It ensures that the previous value of GMAC_VLAN_TAG register is
     read first before for updating the register.

2/5: Similar to 2/6 patch but it is a fix for XGMAC_VLAN_TAG register
     as requested by Jose Abreu.

3/5: It ensures the GMAC IP v4.xx and above behaves correctly to:-
       ip link set <devname> multicast off|on

4/5: Added similar IFF_MULTICAST flag for xgmac2, similar to 4/6.

5/5: It ensures PCI platform data is using plat->phy_interface.

Changes from v4:-
   patch 1/6 - this patch is dropped now and will take the input on
               handling return value from netif_set_real_num_rx|
               tx_queues() in future patch series.

v3:-
   patch 1/6 - add rtnl_lock() and rtnl_unlock() for stmmac_hw_setup()
               called inside stmmac_resume()
   patch 3/6 - Added new patch to fix XGMAC_VLAN_TAG register writting

v2:-
   patch 1/5 - added control for rtnl_lock() & rtnl_unlock() to ensure
               they are used forstmmac_resume()
   patch 4/5 - added IFF_MULTICAST flag check for xgmac to ensure
               multicast works correctly.

v1:-
- Drop v1 patches (1/7, 3/7 & 4/7) that are not valid.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: update pci platform data to use phy_interface

The recent patch to support passive mode converter did not take care the
phy interface configuration in PCI platform data. Hence, converting all
the PCI platform data from plat->interface to plat->phy_interface as the
default mode is meant for PHY.

Fixes: 0060c8783330 ("net: stmmac: implement support for passive mode converters via dt")
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Tested-by: Tan, Tee Min <tee.min.tan@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: xgmac: fix missing IFF_MULTICAST checki in dwxgmac2_set_filter

Without checking for IFF_MULTICAST flag, it is wrong to assume multicast
filtering is always enabled. By checking against IFF_MULTICAST, now
the driver behaves correctly when the multicast support is toggled by below
command:-
ip link set <devname> multicast off|on

Fixes: 0efedbf11f07a ("net: stmmac: xgmac: Fix XGMAC selftests")
Signed-off-by: Tan, Tee Min <tee.min.tan@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: fix missing IFF_MULTICAST check in dwmac4_set_filter

Without checking for IFF_MULTICAST flag, it is wrong to assume multicast
filtering is always enabled. By checking against IFF_MULTICAST, now
the driver behaves correctly when the multicast support is toggled by below
command:-
ip link set <devname> multicast off|on

Fixes: 477286b53f55 ("stmmac: add GMAC4 core support")
Signed-off-by: Verma, Aashish <aashishx.verma@intel.com>
Tested-by: Tan, Tee Min <tee.min.tan@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: xgmac: fix incorrect XGMAC_VLAN_TAG register writting

We should always do a read of current value of XGMAC_VLAN_TAG instead of
directly overwriting the register value.

Fixes: 3cd1cfcba26e2 ("net: stmmac: Implement VLAN Hash Filtering in XGMAC")
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: fix incorrect GMAC_VLAN_TAG register writting in GMAC4+

It should always do a read of current value of GMAC_VLAN_TAG instead of
directly overwriting the register value.

Fixes: c1be0022df0d ("net: stmmac: Add VLAN HASH filtering support in GMAC4+")
Signed-off-by: Tan, Tee Min <tee.min.tan@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hv_netvsc: Fix XDP refcnt for synthetic and VF NICs

The caller of XDP_SETUP_PROG has already incremented refcnt in
__bpf_prog_get(), so drivers should only increment refcnt by
num_queues - 1.

To fix the issue, update netvsc_xdp_set() to add the correct number
to refcnt.

Hold a refcnt in netvsc_xdp_set()’s other caller, netvsc_attach().

And, do the same in netvsc_vf_setxdp(). Otherwise, every time when VF is
removed and added from the host side, the refcnt will be decreased by one,
which may cause page fault when unloading xdp program.

Fixes: 351e1581395f ("hv_netvsc: Add XDP support")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'taprio-Some-fixes'

Vinicius Costa Gomes says:

====================
taprio: Some fixes

Changes from v3:
  - Replaced ENOTSUPP error code with EOPNOTSUPP (Jakub Kicinski);
  - Added the missing policy validation for the flags netlink argument
    (Jakub Kicinski);
  - Fixed the destroy() flow to also destroy the priority to traffic
    class mapping (David Miller);
  - Fixed dropping packets when taprio offloading is used together
    with ETF offloading (more on this below);

Changes from v2:
  - Squashed commits 2/3 and 3/3 into a single one (I think a single
    commit is going to be easier to review);
  - Removed an "improvement" that was causing changes in user visible
    behavior;

Changes from v1:
  - Fixed ignoring the 'flags' argument when adding a new
    instance (Vladimir Oltean);
  - Changed the order of commits;

Updated cover letter:

One bit that might need some attention is the fix for not dropping all
packets when taprio and ETF offloading are used, patch 5/5. The
behavior when the fix is applied is that packets that have a 'txtime'
that would fall outside of their transmission window are now dropped
by taprio. The question that might be raised is: should taprio be
responsible for dropping these packets, or should it be handled lower
in the stack?

My opinion is: taprio has all the information, and it's able to give
feeback to the user. Lower in the stack, those packets might go into
the void, and the only feedback could be a hard to find counter
increasing.

Patch 1/5: Reported by Po Liu, is more of a improvement of usability for
drivers implementing offloading features, now they can rely on the
value of dev->num_tc, instead of going through some hops to get this
value.

Patch 2/5: Use 'q->flags' as the source of truth for the offloading
flags. Tries to solidify the current behavior, while avoiding going
into invalid states, one of which was causing a "rcu stall" (more
information in the commit message).

Patch 3/5: Adds the missing netlink attribute validation for
TCA_TAPRIO_ATTR_FLAGS.

Patch 4/5: Replaces the usage of netdev_set_num_tc() with
netdev_reset_tc() in taprio_destroy(), taprio_destroy() is called when
applying a configuration fails, making sure that the device traffic
class configuration goes back to the default state.

@Vladimir: If possible, I would appreciate your Ack on patch 2/5. I
have been looking at this code for so long that I might have missed
something obvious (and my growing dislike for the word 'flags' may be
affecting my judgement :-).
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

taprio: Fix dropping packets when using taprio + ETF offloading

When using taprio offloading together with ETF offloading, configured
like this, for example:

$ tc qdisc replace dev $IFACE parent root handle 100 taprio \
   num_tc 4 \
        map 2 2 1 0 3 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 1@2 1@3 \
base-time $BASE_TIME \
sched-entry S 01 1000000 \
sched-entry S 0e 1000000 \
flags 0x2

$ tc qdisc replace dev $IFACE parent 100:1 etf \
      offload delta 300000 clockid CLOCK_TAI

During enqueue, it works out that the verification added for the
"txtime" assisted mode is run when using taprio + ETF offloading, the
only thing missing is initializing the 'next_txtime' of all the cycle
entries. (if we don't set 'next_txtime' all packets from SO_TXTIME
sockets are dropped)

Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

taprio: Use taprio_reset_tc() to reset Traffic Classes configuration

When destroying the current taprio instance, which can happen when the
creation of one fails, we should reset the traffic class configuration
back to the default state.

netdev_reset_tc() is a better way because in addition to setting the
number of traffic classes to zero, it also resets the priority to
traffic classes mapping to the default value.

Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

taprio: Add missing policy validation for flags

netlink policy validation for the 'flags' argument was missing.

Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

taprio: Fix still allowing changing the flags during runtime

Because 'q->flags' starts as zero, and zero is a valid value, we
aren't able to detect the transition from zero to something else
during "runtime".

The solution is to initialize 'q->flags' with an invalid value, so we
can detect if 'q->flags' was set by the user or not.

To better solidify the behavior, 'flags' handling is moved to a
separate function. The behavior is:
- 'flags' if unspecified by the user, is assumed to be zero;
- 'flags' cannot change during "runtime" (i.e. a change() request
cannot modify it);

With this new function we can remove taprio_flags, which should reduce
the risk of future accidents.

Allowing flags to be changed was causing the following RCU stall:

[ 1730.558249] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
[ 1730.558258] rcu:   6-...0: (190 ticks this GP) idle=922/0/0x1 softirq=25580/25582 fqs=16250
[ 1730.558264]   (detected by 2, t=65002 jiffies, g=33017, q=81)
[ 1730.558269] Sending NMI from CPU 2 to CPUs 6:
[ 1730.559277] NMI backtrace for cpu 6
[ 1730.559277] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G            E     5.5.0-rc6+ #35
[ 1730.559278] Hardware name: Gigabyte Technology Co., Ltd. Z390 AORUS ULTRA/Z390 AORUS ULTRA-CF, BIOS F7 03/14/2019
[ 1730.559278] RIP: 0010:__hrtimer_run_queues+0xe2/0x440
[ 1730.559278] Code: 48 8b 43 28 4c 89 ff 48 8b 75 c0 48 89 45 c8 e8 f4 bb 7c 00 0f 1f 44 00 00 65 8b 05 40 31 f0 68 89 c0 48 0f a3 05 3e 5c 25 01 <0f> 82 fc 01 00 00 48 8b 45 c8 48 89 df ff d0 89 45 c8 0f 1f 44 00
[ 1730.559279] RSP: 0018:ffff9970802d8f10 EFLAGS: 00000083
[ 1730.559279] RAX: 0000000000000006 RBX: ffff8b31645bff38 RCX: 0000000000000000
[ 1730.559280] RDX: 0000000000000000 RSI: ffffffff9710f2ec RDI: ffffffff978daf0e
[ 1730.559280] RBP: ffff9970802d8f68 R08: 0000000000000000 R09: 0000000000000000
[ 1730.559280] R10: 0000018336d7944e R11: 0000000000000001 R12: ffff8b316e39f9c0
[ 1730.559281] R13: ffff8b316e39f940 R14: ffff8b316e39f998 R15: ffff8b316e39f7c0
[ 1730.559281] FS:  0000000000000000(0000) GS:ffff8b316e380000(0000) knlGS:0000000000000000
[ 1730.559281] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1730.559281] CR2: 00007f1105303760 CR3: 0000000227210005 CR4: 00000000003606e0
[ 1730.559282] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1730.559282] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1730.559282] Call Trace:
[ 1730.559282]  <IRQ>
[ 1730.559283]  ? taprio_dequeue_soft+0x2d0/0x2d0 [sch_taprio]
[ 1730.559283]  hrtimer_interrupt+0x104/0x220
[ 1730.559283]  ? irqtime_account_irq+0x34/0xa0
[ 1730.559283]  smp_apic_timer_interrupt+0x6d/0x230
[ 1730.559284]  apic_timer_interrupt+0xf/0x20
[ 1730.559284]  </IRQ>
[ 1730.559284] RIP: 0010:cpu_idle_poll+0x35/0x1a0
[ 1730.559285] Code: 88 82 ff 65 44 8b 25 12 7d 73 68 0f 1f 44 00 00 e8 90 c3 89 ff fb 65 48 8b 1c 25 c0 7e 01 00 48 8b 03 a8 08 74 0b eb 1c f3 90 <48> 8b 03 a8 08 75 13 8b 05 be a8 a8 00 85 c0 75 ed e8 75 48 84 ff
[ 1730.559285] RSP: 0018:ffff997080137ea8 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff13
[ 1730.559285] RAX: 0000000000000001 RBX: ffff8b316bc3c580 RCX: 0000000000000000
[ 1730.559286] RDX: 0000000000000001 RSI: 000000002819aad9 RDI: ffffffff978da730
[ 1730.559286] RBP: ffff997080137ec0 R08: 0000018324a6d387 R09: 0000000000000000
[ 1730.559286] R10: 0000000000000400 R11: 0000000000000001 R12: 0000000000000006
[ 1730.559286] R13: ffff8b316bc3c580 R14: 0000000000000000 R15: 0000000000000000
[ 1730.559287]  ? cpu_idle_poll+0x20/0x1a0
[ 1730.559287]  ? cpu_idle_poll+0x20/0x1a0
[ 1730.559287]  do_idle+0x4d/0x1f0
[ 1730.559287]  ? complete+0x44/0x50
[ 1730.559288]  cpu_startup_entry+0x1b/0x20
[ 1730.559288]  start_secondary+0x142/0x180
[ 1730.559288]  secondary_startup_64+0xb6/0xc0
[ 1776.686313] nvme nvme0: I/O 96 QID 1 timeout, completion polled

Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

taprio: Fix enabling offload with wrong number of traffic classes

If the driver implementing taprio offloading depends on the value of
the network device number of traffic classes (dev->num_tc) for
whatever reason, it was going to receive the value zero. The value was
only set after the offloading function is called.

So, moving setting the number of traffic classes to before the
offloading function is called fixes this issue. This is safe because
this only happens when taprio is instantiated (we don't allow this
configuration to be changed without first removing taprio).

Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading")
Reported-by: Po Liu <po.liu@nxp.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: bcm_sf2: Only 7278 supports 2Gb/sec IMP port

The 7445 switch clocking profiles do not allow us to run the IMP port at
2Gb/sec in a way that it is reliable and consistent. Make sure that the
setting is only applied to the 7278 family.

Fixes: 8f1880cbe8d0 ("net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: b53: Always use dev->vlan_enabled in b53_configure_vlan()

b53_configure_vlan() is called by the bcm_sf2 driver upon setup and
indirectly through resume as well. During the initial setup, we are
guaranteed that dev->vlan_enabled is false, so there is no change in
behavior, however during suspend, we may have enabled VLANs before, so we
do want to restore that setting.

Fixes: dad8d7c6452b ("net: dsa: b53: Properly account for VLAN filtering")
Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: fix a possible endless loop

It forgot to reduce the value of the variable retry in a while loop
in the ethqos_configure() function. It may cause an endless loop and
without timeout.

Fixes: a7c30e62d4b8 ("net: stmmac: Add driver for Qualcomm ethqos")
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

rxrpc: Fix call RCU cleanup using non-bh-safe locks

rxrpc_rcu_destroy_call(), which is called as an RCU callback to clean up a
put call, calls rxrpc_put_connection() which, deep in its bowels, takes a
number of spinlocks in a non-BH-safe way, including rxrpc_conn_id_lock and
local->client_conns_lock. RCU callbacks, however, are normally called from
softirq context, which can cause lockdep to notice the locking
inconsistency.

To get lockdep to detect this, it's necessary to have the connection
cleaned up on the put at the end of the last of its calls, though normally
the clean up is deferred. This can be induced, however, by starting a call
on an AF_RXRPC socket and then closing the socket without reading the
reply.

Fix this by having rxrpc_rcu_destroy_call() punt the destruction to a
workqueue if in softirq-mode and defer the destruction to process context.

Note that another way to fix this could be to add a bunch of bh-disable
annotations to the spinlocks concerned - and there might be more than just
those two - but that means spending more time with BHs disabled.

Note also that some of these places were covered by bh-disable spinlocks
belonging to the rxrpc_transport object, but these got removed without the
_bh annotation being retained on the next lock in.

Fixes: 999b69f89241 ("rxrpc: Kill the client connection bundle concept")
Reported-by: syzbot+d82f3ac8d87e7ccbb2c9@syzkaller.appspotmail.com
Reported-by: syzbot+3f1fd6b8cbf8702d134e@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Hillf Danton <hdanton@sina.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rxrpc: Fix service call disconnection

The recent patch that substituted a flag on an rxrpc_call for the
connection pointer being NULL as an indication that a call was disconnected
puts the set_bit in the wrong place for service calls. This is only a
problem if a call is implicitly terminated by a new call coming in on the
same connection channel instead of a terminating ACK packet.

In such a case, rxrpc_input_implicit_end_call() calls
__rxrpc_disconnect_call(), which is now (incorrectly) setting the
disconnection bit, meaning that when rxrpc_release_call() is later called,
it doesn't call rxrpc_disconnect_call() and so the call isn't removed from
the peer's error distribution list and the list gets corrupted.

KASAN finds the issue as an access after release on a call, but the
position at which it occurs is confusing as it appears to be related to a
different call (the call site is where the latter call is being removed
from the error distribution list and either the next or pprev pointer
points to a previously released call).

Fix this by moving the setting of the flag from __rxrpc_disconnect_call()
to rxrpc_disconnect_call() in the same place that the connection pointer
was being cleared.

Fixes: 5273a191dca6 ("rxrpc: Fix NULL pointer deref due to call->conn being cleared on disconnect")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mlx5-fixes-2020-02-06' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2020-02-06

This series introduces some fixes to mlx5 driver.

Please pull and let me know if there is any problem.

For -stable v4.19:
('net/mlx5: IPsec, Fix esp modify function attribute')
('net/mlx5: IPsec, fix memory leak at mlx5_fpga_ipsec_delete_sa_ctx')

For -stable v5.4:
   ('net/mlx5: Deprecate usage of generic TLS HW capability bit')
   ('net/mlx5: Fix deadlock in fs_core')

For -stable v5.5:
   ('net/mlx5e: TX, Error completion is for last WQE in batch')
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5: Deprecate usage of generic TLS HW capability bit

Deprecate the generic TLS cap bit, use the new TX-specific
TLS cap bit instead.

Fixes: a12ff35e0fb7 ("net/mlx5: Introduce TLS TX offload hardware bits and structures")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: TX, Error completion is for last WQE in batch

For a cyclic work queue, when not requesting a completion per WQE,
a single CQE might indicate the completion of several WQEs.
However, in case some WQE in the batch causes an error, then an error
completion is issued, breaking the batch, and pointing to the offending
WQE in the wqe_counter field.

Hence, WQE-specific error CQE handling (like printing, breaking, etc...)
should be performed only for the last WQE in batch.

Fixes: 130c7b46c93d ("net/mlx5e: TX, Dump WQs wqe descriptors on CQE with error events")
Fixes: fd9b4be8002c ("net/mlx5e: RX, Support multiple outstanding UMR posts")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: IPsec, fix memory leak at mlx5_fpga_ipsec_delete_sa_ctx

SA context is allocated at mlx5_fpga_ipsec_create_sa_ctx,
however the counterpart mlx5_fpga_ipsec_delete_sa_ctx function
nullifies sa_ctx pointer without freeing the memory allocated,
hence the memory leak.

Fix by free SA context when the SA is released.

Fixes: d6c4f0298cec ("net/mlx5: Refactor accel IPSec code")
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: IPsec, Fix esp modify function attribute

The function mlx5_fpga_esp_validate_xfrm_attrs is wrongly used
with negative negation as zero value indicates success but it
used as failure return value instead.

Fix by remove the unary not negation operator.

Fixes: 05564d0ae075 ("net/mlx5: Add flow-steering commands for FPGA IPSec implementation")
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: Fix deadlock in fs_core

free_match_list could be called when the flow table is already
locked. We need to pass this notation to tree_put_node.

It fixes the following lockdep warnning:

[ 1797.268537] ============================================
[ 1797.276837] WARNING: possible recursive locking detected
[ 1797.285101] 5.5.0-rc5+ #10 Not tainted
[ 1797.291641] --------------------------------------------
[ 1797.299917] handler10/9296 is trying to acquire lock:
[ 1797.307885] ffff889ad399a0a0 (&node->lock){++++}, at:
tree_put_node+0x1d5/0x210 [mlx5_core]
[ 1797.319694]
[ 1797.319694] but task is already holding lock:
[ 1797.330904] ffff889ad399a0a0 (&node->lock){++++}, at:
nested_down_write_ref_node.part.33+0x1a/0x60 [mlx5_core]
[ 1797.344707]
[ 1797.344707] other info that might help us debug this:
[ 1797.356952]  Possible unsafe locking scenario:
[ 1797.356952]
[ 1797.368333]        CPU0
[ 1797.373357]        ----
[ 1797.378364]   lock(&node->lock);
[ 1797.384222]   lock(&node->lock);
[ 1797.390031]
[ 1797.390031]  *** DEADLOCK ***
[ 1797.390031]
[ 1797.403003]  May be due to missing lock nesting notation
[ 1797.403003]
[ 1797.414691] 3 locks held by handler10/9296:
[ 1797.421465]  #0: ffff889cf2c5a110 (&block->cb_lock){++++}, at:
tc_setup_cb_add+0x70/0x250
[ 1797.432810]  #1: ffff88a030081490 (&comp->sem){++++}, at:
mlx5_devcom_get_peer_data+0x4c/0xb0 [mlx5_core]
[ 1797.445829]  #2: ffff889ad399a0a0 (&node->lock){++++}, at:
nested_down_write_ref_node.part.33+0x1a/0x60 [mlx5_core]
[ 1797.459913]
[ 1797.459913] stack backtrace:
[ 1797.469436] CPU: 1 PID: 9296 Comm: handler10 Kdump: loaded Not
tainted 5.5.0-rc5+ #10
[ 1797.480643] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS
2.4.3 01/17/2017
[ 1797.491480] Call Trace:
[ 1797.496701]  dump_stack+0x96/0xe0
[ 1797.502864]  __lock_acquire.cold.63+0xf8/0x212
[ 1797.510301]  ? lockdep_hardirqs_on+0x250/0x250
[ 1797.517701]  ? mark_held_locks+0x55/0xa0
[ 1797.524547]  ? quarantine_put+0xb7/0x160
[ 1797.531422]  ? lockdep_hardirqs_on+0x17d/0x250
[ 1797.538913]  lock_acquire+0xd6/0x1f0
[ 1797.545529]  ? tree_put_node+0x1d5/0x210 [mlx5_core]
[ 1797.553701]  down_write+0x94/0x140
[ 1797.560206]  ? tree_put_node+0x1d5/0x210 [mlx5_core]
[ 1797.568464]  ? down_write_killable_nested+0x170/0x170
[ 1797.576925]  ? del_hw_flow_group+0xde/0x1f0 [mlx5_core]
[ 1797.585629]  tree_put_node+0x1d5/0x210 [mlx5_core]
[ 1797.593891]  ? free_match_list.part.25+0x147/0x170 [mlx5_core]
[ 1797.603389]  free_match_list.part.25+0xe0/0x170 [mlx5_core]
[ 1797.612654]  _mlx5_add_flow_rules+0x17e2/0x20b0 [mlx5_core]
[ 1797.621838]  ? lock_acquire+0xd6/0x1f0
[ 1797.629028]  ? esw_get_prio_table+0xb0/0x3e0 [mlx5_core]
[ 1797.637981]  ? alloc_insert_flow_group+0x420/0x420 [mlx5_core]
[ 1797.647459]  ? try_to_wake_up+0x4c7/0xc70
[ 1797.654881]  ? lock_downgrade+0x350/0x350
[ 1797.662271]  ? __mutex_unlock_slowpath+0xb1/0x3f0
[ 1797.670396]  ? find_held_lock+0xac/0xd0
[ 1797.677540]  ? mlx5_add_flow_rules+0xdc/0x360 [mlx5_core]
[ 1797.686467]  mlx5_add_flow_rules+0xdc/0x360 [mlx5_core]
[ 1797.695134]  ? _mlx5_add_flow_rules+0x20b0/0x20b0 [mlx5_core]
[ 1797.704270]  ? irq_exit+0xa5/0x170
[ 1797.710764]  ? retint_kernel+0x10/0x10
[ 1797.717698]  ? mlx5_eswitch_set_rule_source_port.isra.9+0x122/0x230
[mlx5_core]
[ 1797.728708]  mlx5_eswitch_add_offloaded_rule+0x465/0x6d0 [mlx5_core]
[ 1797.738713]  ? mlx5_eswitch_get_prio_range+0x30/0x30 [mlx5_core]
[ 1797.748384]  ? mlx5_fc_stats_work+0x670/0x670 [mlx5_core]
[ 1797.757400]  mlx5e_tc_offload_fdb_rules.isra.27+0x24/0x90 [mlx5_core]
[ 1797.767665]  mlx5e_tc_add_fdb_flow+0xaf8/0xd40 [mlx5_core]
[ 1797.776886]  ? mlx5e_encap_put+0xd0/0xd0 [mlx5_core]
[ 1797.785562]  ? mlx5e_alloc_flow.isra.43+0x18c/0x1c0 [mlx5_core]
[ 1797.795353]  __mlx5e_add_fdb_flow+0x2e2/0x440 [mlx5_core]
[ 1797.804558]  ? mlx5e_tc_update_neigh_used_value+0x8c0/0x8c0
[mlx5_core]
[ 1797.815093]  ? wait_for_completion+0x260/0x260
[ 1797.823272]  mlx5e_configure_flower+0xe94/0x1620 [mlx5_core]
[ 1797.832792]  ? __mlx5e_add_fdb_flow+0x440/0x440 [mlx5_core]
[ 1797.842096]  ? down_read+0x11a/0x2e0
[ 1797.849090]  ? down_write+0x140/0x140
[ 1797.856142]  ? mlx5e_rep_indr_setup_block_cb+0xc0/0xc0 [mlx5_core]
[ 1797.866027]  tc_setup_cb_add+0x11a/0x250
[ 1797.873339]  fl_hw_replace_filter+0x25e/0x320 [cls_flower]
[ 1797.882385]  ? fl_hw_destroy_filter+0x1c0/0x1c0 [cls_flower]
[ 1797.891607]  fl_change+0x1d54/0x1fb6 [cls_flower]
[ 1797.899772]  ? __rhashtable_insert_fast.constprop.50+0x9f0/0x9f0
[cls_flower]
[ 1797.910728]  ? lock_downgrade+0x350/0x350
[ 1797.918187]  ? __radix_tree_lookup+0xa5/0x130
[ 1797.926046]  ? fl_set_key+0x1590/0x1590 [cls_flower]
[ 1797.934611]  ? __rhashtable_insert_fast.constprop.50+0x9f0/0x9f0
[cls_flower]
[ 1797.945673]  tc_new_tfilter+0xcd1/0x1240
[ 1797.953138]  ? tc_del_tfilter+0xb10/0xb10
[ 1797.960688]  ? avc_has_perm_noaudit+0x92/0x320
[ 1797.968721]  ? avc_has_perm_noaudit+0x1df/0x320
[ 1797.976816]  ? avc_has_extended_perms+0x990/0x990
[ 1797.985090]  ? mark_lock+0xaa/0x9e0
[ 1797.991988]  ? match_held_lock+0x1b/0x240
[ 1797.999457]  ? match_held_lock+0x1b/0x240
[ 1798.006859]  ? find_held_lock+0xac/0xd0
[ 1798.014045]  ? symbol_put_addr+0x40/0x40
[ 1798.021317]  ? rcu_read_lock_sched_held+0xd0/0xd0
[ 1798.029460]  ? tc_del_tfilter+0xb10/0xb10
[ 1798.036810]  rtnetlink_rcv_msg+0x4d5/0x620
[ 1798.044236]  ? rtnl_bridge_getlink+0x460/0x460
[ 1798.052034]  ? lockdep_hardirqs_on+0x250/0x250
[ 1798.059837]  ? match_held_lock+0x1b/0x240
[ 1798.067146]  ? find_held_lock+0xac/0xd0
[ 1798.074246]  netlink_rcv_skb+0xc6/0x1f0
[ 1798.081339]  ? rtnl_bridge_getlink+0x460/0x460
[ 1798.089104]  ? netlink_ack+0x440/0x440
[ 1798.096061]  netlink_unicast+0x2d4/0x3b0
[ 1798.103189]  ? netlink_attachskb+0x3f0/0x3f0
[ 1798.110724]  ? _copy_from_iter_full+0xda/0x370
[ 1798.118415]  netlink_sendmsg+0x3ba/0x6a0
[ 1798.125478]  ? netlink_unicast+0x3b0/0x3b0
[ 1798.132705]  ? netlink_unicast+0x3b0/0x3b0
[ 1798.139880]  sock_sendmsg+0x94/0xa0
[ 1798.146332]  ____sys_sendmsg+0x36c/0x3f0
[ 1798.153251]  ? copy_msghdr_from_user+0x165/0x230
[ 1798.160941]  ? kernel_sendmsg+0x30/0x30
[ 1798.167738]  ___sys_sendmsg+0xeb/0x150
[ 1798.174411]  ? sendmsg_copy_msghdr+0x30/0x30
[ 1798.181649]  ? lock_downgrade+0x350/0x350
[ 1798.188559]  ? rcu_read_lock_sched_held+0xd0/0xd0
[ 1798.196239]  ? __fget+0x21d/0x320
[ 1798.202335]  ? do_dup2+0x2a0/0x2a0
[ 1798.208499]  ? lock_downgrade+0x350/0x350
[ 1798.215366]  ? __fget_light+0xd6/0xf0
[ 1798.221808]  ? syscall_trace_enter+0x369/0x5d0
[ 1798.229112]  __sys_sendmsg+0xd3/0x160
[ 1798.235511]  ? __sys_sendmsg_sock+0x60/0x60
[ 1798.242478]  ? syscall_trace_enter+0x233/0x5d0
[ 1798.249721]  ? syscall_slow_exit_work+0x280/0x280
[ 1798.257211]  ? do_syscall_64+0x1e/0x2e0
[ 1798.263680]  do_syscall_64+0x72/0x2e0
[ 1798.269950]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel")
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net: systemport: Avoid RBUF stuck in Wake-on-LAN mode

After a number of suspend and resume cycles, it is possible for the RBUF
to be stuck in Wake-on-LAN mode, despite the MPD enable bit being
cleared which instructed the RBUF to exit that mode.

Avoid creating that problematic condition by clearing the RX_EN and
TX_EN bits in the UniMAC prior to disable the Magic Packet Detector
logic which is guaranteed to make the RBUF exit Wake-on-LAN mode.

Fixes: 83e82f4c706b ("net: systemport: add Wake-on-LAN support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8169: fix performance regression related to PCIe max read request size

It turned out that on low performance systems the original change can
cause lower tx performance. On a N3450-based mini-PC tx performance
in iperf3 was reduced from 950Mbps to ~900Mbps. Therefore effectively
revert the original change, just use pcie_set_readrq() now instead of
changing the PCIe capability register directly.

Fixes: 2df49d365498 ("r8169: remove fiddling with the PCIe max read request size")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: prevent a use after free

The bug is that we call kfree_skb(skb) and then pass "skb" to
qdisc_pkt_len(skb) on the next line, which is a use after free.
Also Cong Wang points out that it's better to delay the actual
frees until we drop the rtnl lock so we should use rtnl_kfree_skbs()
instead of kfree_skb().

Cc: Cong Wang <xiyou.wangcong@gmail.com>
Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

skbuff: fix a data race in skb_queue_len()

sk_buff.qlen can be accessed concurrently as noticed by KCSAN,

BUG: KCSAN: data-race in __skb_try_recv_from_queue / unix_dgram_sendmsg

read to 0xffff8a1b1d8a81c0 of 4 bytes by task 5371 on cpu 96:
  unix_dgram_sendmsg+0x9a9/0xb70 include/linux/skbuff.h:1821
net/unix/af_unix.c:1761
  ____sys_sendmsg+0x33e/0x370
  ___sys_sendmsg+0xa6/0xf0
  __sys_sendmsg+0x69/0xf0
  __x64_sys_sendmsg+0x51/0x70
  do_syscall_64+0x91/0xb47
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

write to 0xffff8a1b1d8a81c0 of 4 bytes by task 1 on cpu 99:
  __skb_try_recv_from_queue+0x327/0x410 include/linux/skbuff.h:2029
  __skb_try_recv_datagram+0xbe/0x220
  unix_dgram_recvmsg+0xee/0x850
  ____sys_recvmsg+0x1fb/0x210
  ___sys_recvmsg+0xa2/0xf0
  __sys_recvmsg+0x66/0xf0
  __x64_sys_recvmsg+0x51/0x70
  do_syscall_64+0x91/0xb47
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Since only the read is operating as lockless, it could introduce a logic
bug in unix_recvq_full() due to the load tearing. Fix it by adding
a lockless variant of skb_queue_len() and unix_recvq_full() where
READ_ONCE() is on the read while WRITE_ONCE() is on the write similar to
the commit d7d16a89350a ("net: add skb_queue_empty_lockless()").

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvneta: move rx_dropped and rx_errors in per-cpu stats

Move rx_dropped and rx_errors counters in mvneta_pcpu_stats in order to
avoid possible races updating statistics

Fixes: 562e2f467e71 ("net: mvneta: Improve the buffer allocation method for SWBM")
Fixes: dc35a10f68d3 ("net: mvneta: bm: add support for hardware buffer management")
Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

cxgb4: Added tls stats prints.

Added debugfs entry to show the tls stats.

Signed-off-by: Devulapally Shiva Krishna <shiva@chelsio.com>
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: fix use-after-free for ipv6

Turns out that when we accept a new subflow, the newly created
inet_sk(tcp_sk)->pinet6 points at the ipv6_pinfo structure of the
listener socket.

This wasn't caught by the selftest because it closes the accepted fd
before the listening one.

adding a close(listenfd) after accept returns is enough:
BUG: KASAN: use-after-free in inet6_getname+0x6ba/0x790
Read of size 1 at addr ffff88810e310866 by task mptcp_connect/2518
Call Trace:
  inet6_getname+0x6ba/0x790
  __sys_getpeername+0x10b/0x250
  __x64_sys_getpeername+0x6f/0xb0

also alter test program to exercise this.

Reported-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed: Fix timestamping issue for L2 unicast ptp packets.

commit cedeac9df4b8 ("qed: Add support for Timestamping the unicast
PTP packets.") handles the timestamping of L4 ptp packets only.
This patch adds driver changes to detect/timestamp both L2/L4 unicast
PTP packets.

Fixes: cedeac9df4b8 ("qed: Add support for Timestamping the unicast PTP packets.")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'macb-TSO-bug-fixes'

Harini Katakam says:

====================
macb: TSO bug fixes

An IP errata was recently discovered when testing TSO enabled versions
with perf test tools where a false amba error is reported by the IP.
Some ways to reproduce would be to use iperf or applications with payload
descriptor sizes very close to 16K. Once the error is observed TXERR (or
bit 6 of ISR) will be constantly triggered leading to a series of tx path
error handling and clean up. Workaround the same by limiting this size to
0x3FC0 as recommended by Cadence. There was no performance impact on 1G
system that I tested with.

Note on patch 1: The alignment code may be unused but leaving it there
in case anyone is using UFO.

Added Fixes tag to patch 1.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: macb: Limit maximum GEM TX length in TSO

GEM_MAX_TX_LEN currently resolves to 0x3FF8 for any IP version supporting
TSO with full 14bits of length field in payload descriptor. But an IP
errata causes false amba_error (bit 6 of ISR) when length in payload
descriptors is specified above 16387. The error occurs because the DMA
falsely concludes that there is not enough space in SRAM for incoming
payload. These errors were observed continuously under stress of large
packets using iperf on a version where SRAM was 16K for each queue. This
errata will be documented shortly and affects all versions since TSO
functionality was added. Hence limit the max length to 0x3FC0 (rounded).

Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: macb: Remove unnecessary alignment check for TSO

The IP TSO implementation does NOT require the length to be a
multiple of 8. That is only a requirement for UFO as per IP
documentation. Hence, exit macb_features_check function in the
beginning if the protocol is not UDP. Only when it is UDP,
proceed further to the alignment checks. Update comments to
reflect the same. Also remove dead code checking for protocol
TCP when calculating header length.

Fixes: 1629dd4f763c ("cadence: Add LSO support.")
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bonding/alb: properly access headers in bond_alb_xmit()

syzbot managed to send an IPX packet through bond_alb_xmit()
and af_packet and triggered a use-after-free.

First, bond_alb_xmit() was using ipx_hdr() helper to reach
the IPX header, but ipx_hdr() was using the transport offset
instead of the network offset. In the particular syzbot
report transport offset was 0xFFFF

This patch removes ipx_hdr() since it was only (mis)used from bonding.

Then we need to make sure IPv4/IPv6/IPX headers are pulled
in skb->head before dereferencing anything.

BUG: KASAN: use-after-free in bond_alb_xmit+0x153a/0x1590 drivers/net/bonding/bond_alb.c:1452
Read of size 2 at addr ffff8801ce56dfff by task syz-executor.2/18108
(if (ipx_hdr(skb)->ipx_checksum != IPX_NO_CHECKSUM) ...)

Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
[<ffffffff8441fc42>] __dump_stack lib/dump_stack.c:17 [inline]
[<ffffffff8441fc42>] dump_stack+0x14d/0x20b lib/dump_stack.c:53
[<ffffffff81a7dec4>] print_address_description+0x6f/0x20b mm/kasan/report.c:282
[<ffffffff81a7e0ec>] kasan_report_error mm/kasan/report.c:380 [inline]
[<ffffffff81a7e0ec>] kasan_report mm/kasan/report.c:438 [inline]
[<ffffffff81a7e0ec>] kasan_report.cold+0x8c/0x2a0 mm/kasan/report.c:422
[<ffffffff81a7dc4f>] __asan_report_load_n_noabort+0xf/0x20 mm/kasan/report.c:469
[<ffffffff82c8c00a>] bond_alb_xmit+0x153a/0x1590 drivers/net/bonding/bond_alb.c:1452
[<ffffffff82c60c74>] __bond_start_xmit drivers/net/bonding/bond_main.c:4199 [inline]
[<ffffffff82c60c74>] bond_start_xmit+0x4f4/0x1570 drivers/net/bonding/bond_main.c:4224
[<ffffffff83baa558>] __netdev_start_xmit include/linux/netdevice.h:4525 [inline]
[<ffffffff83baa558>] netdev_start_xmit include/linux/netdevice.h:4539 [inline]
[<ffffffff83baa558>] xmit_one net/core/dev.c:3611 [inline]
[<ffffffff83baa558>] dev_hard_start_xmit+0x168/0x910 net/core/dev.c:3627
[<ffffffff83bacf35>] __dev_queue_xmit+0x1f55/0x33b0 net/core/dev.c:4238
[<ffffffff83bae3a8>] dev_queue_xmit+0x18/0x20 net/core/dev.c:4278
[<ffffffff84339189>] packet_snd net/packet/af_packet.c:3226 [inline]
[<ffffffff84339189>] packet_sendmsg+0x4919/0x70b0 net/packet/af_packet.c:3252
[<ffffffff83b1ac0c>] sock_sendmsg_nosec net/socket.c:673 [inline]
[<ffffffff83b1ac0c>] sock_sendmsg+0x12c/0x160 net/socket.c:684
[<ffffffff83b1f5a2>] __sys_sendto+0x262/0x380 net/socket.c:1996
[<ffffffff83b1f700>] SYSC_sendto net/socket.c:2008 [inline]
[<ffffffff83b1f700>] SyS_sendto+0x40/0x60 net/socket.c:2004

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

devlink: report 0 after hitting end in region read

commit fdd41ec21e15 ("devlink: Return right error code in case of errors
for region read") modified the region read code to report errors
properly in unexpected cases.

In the case where the start_offset and ret_offset match, it unilaterally
converted this into an error. This causes an issue for the "dump"
version of the command. In this case, the devlink region dump will
always report an invalid argument:

000000000000ffd0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
000000000000ffe0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
devlink answers: Invalid argument
000000000000fff0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

This occurs because the expected flow for the dump is to return 0 after
there is no further data.

The simplest fix would be to stop converting the error code to -EINVAL
if start_offset == ret_offset. However, avoid unnecessary work by
checking for when start_offset is larger than the region size and
returning 0 upfront.

Fixes: fdd41ec21e15 ("devlink: Return right error code in case of errors for region read")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: dec: tulip: Fix length mask in receive length calculation

The receive frame length calculation uses a wrong mask to calculate the
length of the received frames.

Per spec table 4-1 the length is contained in the FL (Frame Length)
field in bits 30:16.

This didn't show up as an issue so far since frames were limited to
1500 bytes which falls within the 11 bit window.

Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'wg-fixes'

Jason A. Donenfeld says:

====================
wireguard fixes for 5.6-rc1

Here are fixes for WireGuard before 5.6-rc1 is tagged. It includes:

1) A fix for a UaF (caused by kmalloc failing during a very small
   allocation) that syzkaller found, from Eric Dumazet.

2) A fix for a deadlock that syzkaller found, along with an additional
   selftest to ensure that the bug fix remains correct, from me.

3) Two little fixes/cleanups to the selftests from Krzysztof Kozlowski
   and me.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

wireguard: selftests: tie socket waiting to target pid

Without this, we wind up proceeding too early sometimes when the
previous process has just used the same listening port. So, we tie the
listening socket query to the specific pid we're interested in.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

wireguard: selftests: cleanup CONFIG_ENABLE_WARN_DEPRECATED

CONFIG_ENABLE_WARN_DEPRECATED is gone since commit 771c035372a0
("deprecate the '__deprecated' attribute warnings entirely and for
good").

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

wireguard: selftests: ensure non-addition of peers with failed precomputation

Ensure that peers with low order points are ignored, both in the case
where we already have a device private key and in the case where we do
not. This adds points that naturally give a zero output.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

wireguard: noise: reject peers with low order public keys

Our static-static calculation returns a failure if the public key is of
low order. We check for this when peers are added, and don't allow them
to be added if they're low order, except in the case where we haven't
yet been given a private key. In that case, we would defer the removal
of the peer until we're given a private key, since at that point we're
doing new static-static calculations which incur failures we can act on.
This meant, however, that we wound up removing peers rather late in the
configuration flow.

Syzkaller points out that peer_remove calls flush_workqueue, which in
turn might then wait for sending a handshake initiation to complete.
Since handshake initiation needs the static identity lock, holding the
static identity lock while calling peer_remove can result in a rare
deadlock. We have precisely this case in this situation of late-stage
peer removal based on an invalid public key. We can't drop the lock when
removing, because then incoming handshakes might interact with a bogus
static-static calculation.

While the band-aid patch for this would involve breaking up the peer
removal into two steps like wg_peer_remove_all does, in order to solve
the locking issue, there's actually a much more elegant way of fixing
this:

If the static-static calculation succeeds with one private key, it
*must* succeed with all others, because all 32-byte strings map to valid
private keys, thanks to clamping. That means we can get rid of this
silly dance and locking headaches of removing peers late in the
configuration flow, and instead just reject them early on, regardless of
whether the device has yet been assigned a private key. For the case
where the device doesn't yet have a private key, we safely use zeros
just for the purposes of checking for low order points by way of
checking the output of the calculation.

The following PoC will trigger the deadlock:

ip link add wg0 type wireguard
ip addr add 10.0.0.1/24 dev wg0
ip link set wg0 up
ping -f 10.0.0.2 &
while true; do
        wg set wg0 private-key /dev/null peer AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA= allowed-ips 10.0.0.0/24 endpoint 10.0.0.3:1234
        wg set wg0 private-key <(echo AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=)
done

[    0.949105] ======================================================
[    0.949550] WARNING: possible circular locking dependency detected
[    0.950143] 5.5.0-debug+ #18 Not tainted
[    0.950431] ------------------------------------------------------
[    0.950959] wg/89 is trying to acquire lock:
[    0.951252] ffff8880333e2128 ((wq_completion)wg-kex-wg0){+.+.}, at: flush_workqueue+0xe3/0x12f0
[    0.951865]
[    0.951865] but task is already holding lock:
[    0.952280] ffff888032819bc0 (&wg->static_identity.lock){++++}, at: wg_set_device+0x95d/0xcc0
[    0.953011]
[    0.953011] which lock already depends on the new lock.
[    0.953011]
[    0.953651]
[    0.953651] the existing dependency chain (in reverse order) is:
[    0.954292]
[    0.954292] -> #2 (&wg->static_identity.lock){++++}:
[    0.954804]        lock_acquire+0x127/0x350
[    0.955133]        down_read+0x83/0x410
[    0.955428]        wg_noise_handshake_create_initiation+0x97/0x700
[    0.955885]        wg_packet_send_handshake_initiation+0x13a/0x280
[    0.956401]        wg_packet_handshake_send_worker+0x10/0x20
[    0.956841]        process_one_work+0x806/0x1500
[    0.957167]        worker_thread+0x8c/0xcb0
[    0.957549]        kthread+0x2ee/0x3b0
[    0.957792]        ret_from_fork+0x24/0x30
[    0.958234]
[    0.958234] -> #1 ((work_completion)(&peer->transmit_handshake_work)){+.+.}:
[    0.958808]        lock_acquire+0x127/0x350
[    0.959075]        process_one_work+0x7ab/0x1500
[    0.959369]        worker_thread+0x8c/0xcb0
[    0.959639]        kthread+0x2ee/0x3b0
[    0.959896]        ret_from_fork+0x24/0x30
[    0.960346]
[    0.960346] -> #0 ((wq_completion)wg-kex-wg0){+.+.}:
[    0.960945]        check_prev_add+0x167/0x1e20
[    0.961351]        __lock_acquire+0x2012/0x3170
[    0.961725]        lock_acquire+0x127/0x350
[    0.961990]        flush_workqueue+0x106/0x12f0
[    0.962280]        peer_remove_after_dead+0x160/0x220
[    0.962600]        wg_set_device+0xa24/0xcc0
[    0.962994]        genl_rcv_msg+0x52f/0xe90
[    0.963298]        netlink_rcv_skb+0x111/0x320
[    0.963618]        genl_rcv+0x1f/0x30
[    0.963853]        netlink_unicast+0x3f6/0x610
[    0.964245]        netlink_sendmsg+0x700/0xb80
[    0.964586]        __sys_sendto+0x1dd/0x2c0
[    0.964854]        __x64_sys_sendto+0xd8/0x1b0
[    0.965141]        do_syscall_64+0x90/0xd9a
[    0.965408]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[    0.965769]
[    0.965769] other info that might help us debug this:
[    0.965769]
[    0.966337] Chain exists of:
[    0.966337]   (wq_completion)wg-kex-wg0 --> (work_completion)(&peer->transmit_handshake_work) --> &wg->static_identity.lock
[    0.966337]
[    0.967417]  Possible unsafe locking scenario:
[    0.967417]
[    0.967836]        CPU0                    CPU1
[    0.968155]        ----                    ----
[    0.968497]   lock(&wg->static_identity.lock);
[    0.968779]                                lock((work_completion)(&peer->transmit_handshake_work));
[    0.969345]                                lock(&wg->static_identity.lock);
[    0.969809]   lock((wq_completion)wg-kex-wg0);
[    0.970146]
[    0.970146]  *** DEADLOCK ***
[    0.970146]
[    0.970531] 5 locks held by wg/89:
[    0.970908]  #0: ffffffff827433c8 (cb_lock){++++}, at: genl_rcv+0x10/0x30
[    0.971400]  #1: ffffffff82743480 (genl_mutex){+.+.}, at: genl_rcv_msg+0x642/0xe90
[    0.971924]  #2: ffffffff827160c0 (rtnl_mutex){+.+.}, at: wg_set_device+0x9f/0xcc0
[    0.972488]  #3: ffff888032819de0 (&wg->device_update_lock){+.+.}, at: wg_set_device+0xb0/0xcc0
[    0.973095]  #4: ffff888032819bc0 (&wg->static_identity.lock){++++}, at: wg_set_device+0x95d/0xcc0
[    0.973653]
[    0.973653] stack backtrace:
[    0.973932] CPU: 1 PID: 89 Comm: wg Not tainted 5.5.0-debug+ #18
[    0.974476] Call Trace:
[    0.974638]  dump_stack+0x97/0xe0
[    0.974869]  check_noncircular+0x312/0x3e0
[    0.975132]  ? print_circular_bug+0x1f0/0x1f0
[    0.975410]  ? __kernel_text_address+0x9/0x30
[    0.975727]  ? unwind_get_return_address+0x51/0x90
[    0.976024]  check_prev_add+0x167/0x1e20
[    0.976367]  ? graph_lock+0x70/0x160
[    0.976682]  __lock_acquire+0x2012/0x3170
[    0.976998]  ? register_lock_class+0x1140/0x1140
[    0.977323]  lock_acquire+0x127/0x350
[    0.977627]  ? flush_workqueue+0xe3/0x12f0
[    0.977890]  flush_workqueue+0x106/0x12f0
[    0.978147]  ? flush_workqueue+0xe3/0x12f0
[    0.978410]  ? find_held_lock+0x2c/0x110
[    0.978662]  ? lock_downgrade+0x6e0/0x6e0
[    0.978919]  ? queue_rcu_work+0x60/0x60
[    0.979166]  ? netif_napi_del+0x151/0x3b0
[    0.979501]  ? peer_remove_after_dead+0x160/0x220
[    0.979871]  peer_remove_after_dead+0x160/0x220
[    0.980232]  wg_set_device+0xa24/0xcc0
[    0.980516]  ? deref_stack_reg+0x8e/0xc0
[    0.980801]  ? set_peer+0xe10/0xe10
[    0.981040]  ? __ww_mutex_check_waiters+0x150/0x150
[    0.981430]  ? __nla_validate_parse+0x163/0x270
[    0.981719]  ? genl_family_rcv_msg_attrs_parse+0x13f/0x310
[    0.982078]  genl_rcv_msg+0x52f/0xe90
[    0.982348]  ? genl_family_rcv_msg_attrs_parse+0x310/0x310
[    0.982690]  ? register_lock_class+0x1140/0x1140
[    0.983049]  netlink_rcv_skb+0x111/0x320
[    0.983298]  ? genl_family_rcv_msg_attrs_parse+0x310/0x310
[    0.983645]  ? netlink_ack+0x880/0x880
[    0.983888]  genl_rcv+0x1f/0x30
[    0.984168]  netlink_unicast+0x3f6/0x610
[    0.984443]  ? netlink_detachskb+0x60/0x60
[    0.984729]  ? find_held_lock+0x2c/0x110
[    0.984976]  netlink_sendmsg+0x700/0xb80
[    0.985220]  ? netlink_broadcast_filtered+0xa60/0xa60
[    0.985533]  __sys_sendto+0x1dd/0x2c0
[    0.985763]  ? __x64_sys_getpeername+0xb0/0xb0
[    0.986039]  ? sockfd_lookup_light+0x17/0x160
[    0.986397]  ? __sys_recvmsg+0x8c/0xf0
[    0.986711]  ? __sys_recvmsg_sock+0xd0/0xd0
[    0.987018]  __x64_sys_sendto+0xd8/0x1b0
[    0.987283]  ? lockdep_hardirqs_on+0x39b/0x5a0
[    0.987666]  do_syscall_64+0x90/0xd9a
[    0.987903]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[    0.988223] RIP: 0033:0x7fe77c12003e
[    0.988508] Code: c3 8b 07 85 c0 75 24 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 4
[    0.989666] RSP: 002b:00007fffada2ed58 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[    0.990137] RAX: ffffffffffffffda RBX: 00007fe77c159d48 RCX: 00007fe77c12003e
[    0.990583] RDX: 0000000000000040 RSI: 000055fd1d38e020 RDI: 0000000000000004
[    0.991091] RBP: 000055fd1d38e020 R08: 000055fd1cb63358 R09: 000000000000000c
[    0.991568] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000002c
[    0.992014] R13: 0000000000000004 R14: 000055fd1d38e020 R15: 0000000000000001

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

wireguard: allowedips: fix use-after-free in root_remove_peer_lists

In the unlikely case a new node could not be allocated, we need to
remove @newnode from @peer->allowedips_list before freeing it.

syzbot reported:

BUG: KASAN: use-after-free in __list_del_entry_valid+0xdc/0xf5 lib/list_debug.c:54
Read of size 8 at addr ffff88809881a538 by task syz-executor.4/30133

CPU: 0 PID: 30133 Comm: syz-executor.4 Not tainted 5.5.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
__kasan_report.cold+0x1b/0x32 mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:639
__asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135
__list_del_entry_valid+0xdc/0xf5 lib/list_debug.c:54
__list_del_entry include/linux/list.h:132 [inline]
list_del include/linux/list.h:146 [inline]
root_remove_peer_lists+0x24f/0x4b0 drivers/net/wireguard/allowedips.c:65
wg_allowedips_free+0x232/0x390 drivers/net/wireguard/allowedips.c:300
wg_peer_remove_all+0xd5/0x620 drivers/net/wireguard/peer.c:187
wg_set_device+0xd01/0x1350 drivers/net/wireguard/netlink.c:542
genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:717 [inline]
genl_rcv_msg+0x67d/0xea0 net/netlink/genetlink.c:734
netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
genl_rcv+0x29/0x40 net/netlink/genetlink.c:745
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:672
____sys_sendmsg+0x753/0x880 net/socket.c:2343
___sys_sendmsg+0x100/0x170 net/socket.c:2397
__sys_sendmsg+0x105/0x1d0 net/socket.c:2430
__do_sys_sendmsg net/socket.c:2439 [inline]
__se_sys_sendmsg net/socket.c:2437 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2437
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x45b399
Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f99a9bcdc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f99a9bce6d4 RCX: 000000000045b399
RDX: 0000000000000000 RSI: 0000000020001340 RDI: 0000000000000003
RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000004
R13: 00000000000009ba R14: 00000000004cb2b8 R15: 0000000000000009

Allocated by task 30103:
save_stack+0x23/0x90 mm/kasan/common.c:72
set_track mm/kasan/common.c:80 [inline]
__kasan_kmalloc mm/kasan/common.c:513 [inline]
__kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486
kasan_kmalloc+0x9/0x10 mm/kasan/common.c:527
kmem_cache_alloc_trace+0x158/0x790 mm/slab.c:3551
kmalloc include/linux/slab.h:556 [inline]
kzalloc include/linux/slab.h:670 [inline]
add+0x70a/0x1970 drivers/net/wireguard/allowedips.c:236
wg_allowedips_insert_v4+0xf6/0x160 drivers/net/wireguard/allowedips.c:320
set_allowedip drivers/net/wireguard/netlink.c:343 [inline]
set_peer+0xfb9/0x1150 drivers/net/wireguard/netlink.c:468
wg_set_device+0xbd4/0x1350 drivers/net/wireguard/netlink.c:591
genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:717 [inline]
genl_rcv_msg+0x67d/0xea0 net/netlink/genetlink.c:734
netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
genl_rcv+0x29/0x40 net/netlink/genetlink.c:745
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:672
____sys_sendmsg+0x753/0x880 net/socket.c:2343
___sys_sendmsg+0x100/0x170 net/socket.c:2397
__sys_sendmsg+0x105/0x1d0 net/socket.c:2430
__do_sys_sendmsg net/socket.c:2439 [inline]
__se_sys_sendmsg net/socket.c:2437 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2437
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 30103:
save_stack+0x23/0x90 mm/kasan/common.c:72
set_track mm/kasan/common.c:80 [inline]
kasan_set_free_info mm/kasan/common.c:335 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/common.c:474
kasan_slab_free+0xe/0x10 mm/kasan/common.c:483
__cache_free mm/slab.c:3426 [inline]
kfree+0x10a/0x2c0 mm/slab.c:3757
add+0x12d2/0x1970 drivers/net/wireguard/allowedips.c:266
wg_allowedips_insert_v4+0xf6/0x160 drivers/net/wireguard/allowedips.c:320
set_allowedip drivers/net/wireguard/netlink.c:343 [inline]
set_peer+0xfb9/0x1150 drivers/net/wireguard/netlink.c:468
wg_set_device+0xbd4/0x1350 drivers/net/wireguard/netlink.c:591
genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:717 [inline]
genl_rcv_msg+0x67d/0xea0 net/netlink/genetlink.c:734
netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
genl_rcv+0x29/0x40 net/netlink/genetlink.c:745
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:672
____sys_sendmsg+0x753/0x880 net/socket.c:2343
___sys_sendmsg+0x100/0x170 net/socket.c:2397
__sys_sendmsg+0x105/0x1d0 net/socket.c:2430
__do_sys_sendmsg net/socket.c:2439 [inline]
__se_sys_sendmsg net/socket.c:2437 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2437
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff88809881a500
which belongs to the cache kmalloc-64 of size 64
The buggy address is located 56 bytes inside of
64-byte region [ffff88809881a500, ffff88809881a540)
The buggy address belongs to the page:
page:ffffea0002620680 refcount:1 mapcount:0 mapping:ffff8880aa400380 index:0x0
raw: 00fffe0000000200 ffffea000250b748 ffffea000254bac8 ffff8880aa400380
raw: 0000000000000000 ffff88809881a000 0000000100000020 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff88809881a400: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff88809881a480: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
>ffff88809881a500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
^
ffff88809881a580: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff88809881a600: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc

Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: wireguard@lists.zx2c4.com
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net_sched: fix a resource leak in tcindex_set_parms()

Jakub noticed there is a potential resource leak in
tcindex_set_parms(): when tcindex_filter_result_init() fails
and it jumps to 'errout1' which doesn't release the memory
and resources allocated by tcindex_alloc_perfect_hash().

We should just jump to 'errout_alloc' which calls
tcindex_free_perfect_hash().

Fixes: b9a24bb76bf6 ("net_sched: properly handle failure case of tcf_exts_init()")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: fix use-after-free on tcp fallback

When an mptcp socket connects to a tcp peer or when a middlebox interferes
with tcp options, mptcp needs to fall back to plain tcp.
Problem is that mptcp is trying to be too clever in this case:

It attempts to close the mptcp meta sk and transparently replace it with
the (only) subflow tcp sk.

Unfortunately, this is racy -- the socket is already exposed to userspace.
Any parallel calls to send/recv/setsockopt etc. can cause use-after-free:

BUG: KASAN: use-after-free in atomic_try_cmpxchg include/asm-generic/atomic-instrumented.h:693 [inline]
CPU: 1 PID: 2083 Comm: syz-executor.1 Not tainted 5.5.0 #2
atomic_try_cmpxchg include/asm-generic/atomic-instrumented.h:693 [inline]
queued_spin_lock include/asm-generic/qspinlock.h:78 [inline]
do_raw_spin_lock include/linux/spinlock.h:181 [inline]
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:136 [inline]
_raw_spin_lock_bh+0x71/0xd0 kernel/locking/spinlock.c:175
spin_lock_bh include/linux/spinlock.h:343 [inline]
__lock_sock+0x105/0x190 net/core/sock.c:2414
lock_sock_nested+0x10f/0x140 net/core/sock.c:2938
lock_sock include/net/sock.h:1516 [inline]
mptcp_setsockopt+0x2f/0x1f0 net/mptcp/protocol.c:800
__sys_setsockopt+0x152/0x240 net/socket.c:2130
__do_sys_setsockopt net/socket.c:2146 [inline]
__se_sys_setsockopt net/socket.c:2143 [inline]
__x64_sys_setsockopt+0xba/0x150 net/socket.c:2143
do_syscall_64+0xb7/0x3d0 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x44/0xa9

While the use-after-free can be resolved, there is another problem:
sock->ops and sock->sk assignments are not atomic, i.e. we may get calls
into mptcp functions with sock->sk already pointing at the subflow socket,
or calls into tcp functions with a mptcp meta sk.

Remove the fallback code and call the relevant functions for the (only)
subflow in case the mptcp socket is connected to tcp peer.

Reported-by: Christoph Paasch <cpaasch@apple.com>
Diagnosed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: microchip: Platform data shan't include kernel.h

Replace with appropriate types.h.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: b53: Platform data shan't include kernel.h

Replace with appropriate types.h.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdevsim: fix ptr_ret.cocci warnings

drivers/net/netdevsim/dev.c:937:1-3: WARNING: PTR_ERR_OR_ZERO can be used

Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Generated by: scripts/coccinelle/api/ptr_ret.cocci

Fixes: 6556ff32f12d ("netdevsim: use IS_ERR instead of IS_ERR_OR_NULL for debugfs")
CC: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sgi: ioc3-eth: Remove leftover free_irq()

Commit 0ce5ebd24d25 ("mfd: ioc3: Add driver for SGI IOC3 chip") moved
request_irq() from ioc3_open into probe function, but forgot to remove
free_irq() from ioc3_close.

Fixes: 0ce5ebd24d25 ("mfd: ioc3: Add driver for SGI IOC3 chip")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

1) Use after free in rxrpc_put_local(), from David Howells.

2) Fix 64-bit division error in mlxsw, from Nathan Chancellor.

3) Make sure we clear various bits of TCP state in response to
    tcp_disconnect(). From Eric Dumazet.

4) Fix netlink attribute policy in cls_rsvp, from Eric Dumazet.

5) txtimer must be deleted in stmmac suspend(), from Nicolin Chen.

6) Fix TC queue mapping in bnxt_en driver, from Michael Chan.

7) Various netdevsim fixes from Taehee Yoo (use of uninitialized data,
    snapshot panics, stack out of bounds, etc.)

8) cls_tcindex changes hash table size after allocating the table, fix
    from Cong Wang.

9) Fix regression in the enforcement of session ID uniqueness in l2tp.
    We only have to enforce uniqueness for IP based tunnels not UDP
    ones. From Ridge Kennedy.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
  gtp: use __GFP_NOWARN to avoid memalloc warning
  l2tp: Allow duplicate session creation with UDP
  r8152: Add MAC passthrough support to new device
  net_sched: fix an OOB access in cls_tcindex
  qed: Remove set but not used variable 'p_link'
  tc-testing: add missing 'nsPlugin' to basic.json
  tc-testing: fix eBPF tests failure on linux fresh clones
  net: hsr: fix possible NULL deref in hsr_handle_frame()
  netdevsim: remove unused sdev code
  netdevsim: use __GFP_NOWARN to avoid memalloc warning
  netdevsim: use IS_ERR instead of IS_ERR_OR_NULL for debugfs
  netdevsim: fix stack-out-of-bounds in nsim_dev_debugfs_init()
  netdevsim: fix panic in nsim_dev_take_snapshot_write()
  netdevsim: disable devlink reload when resources are being used
  netdevsim: fix using uninitialized resources
  bnxt_en: Fix TC queue mapping.
  bnxt_en: Fix logic that disables Bus Master during firmware reset.
  bnxt_en: Fix RDMA driver failure with SRIOV after firmware reset.
  bnxt_en: Refactor logic to re-enable SRIOV after firmware reset detected.
  net: stmmac: Delete txtimer in suspend()
  ...

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:

- decompressor updates

- prevention of out-of-bounds access while stacktracing

- fix a section mismatch warning with free_memmap()

- make kexec depend on MMU to avoid some build errors

- remove swapops stubs

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8954/1: NOMMU: remove stubs for swapops
  ARM: 8952/1: Disable kmemleak on XIP kernels
  ARM: 8951/1: Fix Kexec compilation issue.
  ARM: 8949/1: mm: mark free_memmap as __init
  ARM: 8948/1: Prevent OOB access in stacktrace
  ARM: 8945/1: decompressor: use CONFIG option instead of cc-option
  ARM: 8942/1: Revert "8857/1: efi: enable CP15 DMB instructions before cleaning the cache"
  ARM: 8941/1: decompressor: enable CP15 barrier instructions in v7 cache setup code

Merge tag 'powerpc-5.6-1' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
"A pretty small batch for us, and apologies for it being a bit late, I
  wanted to sneak Christophe's user_access_begin() series in.

  Summary:

   - Implement user_access_begin() and friends for our platforms that
     support controlling kernel access to userspace.

   - Enable CONFIG_VMAP_STACK on 32-bit Book3S and 8xx.

   - Some tweaks to our pseries IOMMU code to allow SVMs ("secure"
     virtual machines) to use the IOMMU.

   - Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 32-bit
     VDSO, and some other improvements.

   - A series to use the PCI hotplug framework to control opencapi
     card's so that they can be reset and re-read after flashing a new
     FPGA image.

  As well as other minor fixes and improvements as usual.

  Thanks to: Alastair D'Silva, Alexandre Ghiti, Alexey Kardashevskiy,
  Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Bai Yingjie, Chen
  Zhou, Christophe Leroy, Frederic Barrat, Greg Kurz, Jason A.
  Donenfeld, Joel Stanley, Jordan Niethe, Julia Lawall, Krzysztof
  Kozlowski, Laurent Dufour, Laurentiu Tudor, Linus Walleij, Michael
  Bringmann, Nathan Chancellor, Nicholas Piggin, Nick Desaulniers,
  Oliver O'Halloran, Peter Ujfalusi, Pingfan Liu, Ram Pai, Randy Dunlap,
  Russell Currey, Sam Bobroff, Sebastian Andrzej Siewior, Shawn
  Anastasio, Stephen Rothwell, Steve Best, Sukadev Bhattiprolu, Thiago
  Jung Bauermann, Tyrel Datwyler, Vaibhav Jain"

* tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (131 commits)
  powerpc: configs: Cleanup old Kconfig options
  powerpc/configs/skiroot: Enable some more hardening options
  powerpc/configs/skiroot: Disable xmon default & enable reboot on panic
  powerpc/configs/skiroot: Enable security features
  powerpc/configs/skiroot: Update for symbol movement only
  powerpc/configs/skiroot: Drop default n CONFIG_CRYPTO_ECHAINIV
  powerpc/configs/skiroot: Drop HID_LOGITECH
  powerpc/configs: Drop NET_VENDOR_HP which moved to staging
  powerpc/configs: NET_CADENCE became NET_VENDOR_CADENCE
  powerpc/configs: Drop CONFIG_QLGE which moved to staging
  powerpc: Do not consider weak unresolved symbol relocations as bad
  powerpc/32s: Fix kasan_early_hash_table() for CONFIG_VMAP_STACK
  powerpc: indent to improve Kconfig readability
  powerpc: Provide initial documentation for PAPR hcalls
  powerpc: Implement user_access_save() and user_access_restore()
  powerpc: Implement user_access_begin and friends
  powerpc/32s: Prepare prevent_user_access() for user_access_end()
  powerpc/32s: Drop NULL addr verification
  powerpc/kuap: Fix set direction in allow/prevent_user_access()
  powerpc/32s: Fix bad_kuap_fault()
  ...

Merge tag 'microblaze-v5.6-rc1' of git://git.monstr.eu/linux-2.6-microblaze

Pull Microblaze update from Michal Simek:

- enable CMA

- add support for MB v11

- defconfig updates

- minor fixes

* tag 'microblaze-v5.6-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Add ID for Microblaze v11
  microblaze: Prevent the overflow of the start
  microblaze: Wire CMA allocator
  asm-generic: Make dma-contiguous.h a mandatory include/asm header
  microblaze: Sync defconfig with latest Kconfig layout
  microblaze: defconfig: Disable EXT2 driver and Enable EXT3 & EXT4 drivers
  microblaze: Align comments with register usage

Merge tag 'ovl-update-5.6' of git://git./linux/kernel/git/mszeredi/vfs

Pull overlayfs update from Miklos Szeredi:

- Try to preserve holes in sparse files when copying up, thus saving
   disk space and improving performance.

- Fix a performance regression introduced in v4.19 by preserving
   asynchronicity of IO when fowarding to underlying layers. Add VFS
   helpers to submit async iocbs.

- Fix a regression in lseek(2) introduced in v4.19 that breaks >2G
   seeks on 32bit kernels.

- Fix a corner case where st_ino/st_dev was not preserved across copy
   up.

- Miscellaneous fixes and cleanups.

* tag 'ovl-update-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: fix lseek overflow on 32bit
  ovl: add splice file read write helper
  ovl: implement async IO routines
  vfs: add vfs_iocb_iter_[read|write] helper functions
  ovl: layer is const
  ovl: fix corner case of non-constant st_dev;st_ino
  ovl: fix corner case of conflicting lower layer uuid
  ovl: generalize the lower_fs[] array
  ovl: simplify ovl_same_sb() helper
  ovl: generalize the lower_layers[] array
  ovl: improving copy-up efficiency for big sparse file
  ovl: use ovl_inode_lock in ovl_llseek()
  ovl: use pr_fmt auto generate prefix
  ovl: fix wrong WARN_ON() in ovl_cache_update_ino()

gtp: use __GFP_NOWARN to avoid memalloc warning

gtp hashtable size is received by user-space.
So, this hashtable size could be too large. If so, kmalloc will internally
print a warning message.
This warning message is actually not necessary for the gtp module.
So, this patch adds __GFP_NOWARN to avoid this message.

Splat looks like:
[ 2171.200049][ T1860] WARNING: CPU: 1 PID: 1860 at mm/page_alloc.c:4713 __alloc_pages_nodemask+0x2f3/0x740
[ 2171.238885][ T1860] Modules linked in: gtp veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv]
[ 2171.262680][ T1860] CPU: 1 PID: 1860 Comm: gtp-link Not tainted 5.5.0+ #321
[ 2171.263567][ T1860] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 2171.264681][ T1860] RIP: 0010:__alloc_pages_nodemask+0x2f3/0x740
[ 2171.265332][ T1860] Code: 64 fe ff ff 65 48 8b 04 25 c0 0f 02 00 48 05 f0 12 00 00 41 be 01 00 00 00 49 89 47 0
[ 2171.267301][ T1860] RSP: 0018:ffff8880b51af1f0 EFLAGS: 00010246
[ 2171.268320][ T1860] RAX: ffffed1016a35e43 RBX: 0000000000000000 RCX: 0000000000000000
[ 2171.269517][ T1860] RDX: 0000000000000000 RSI: 000000000000000b RDI: 0000000000000000
[ 2171.270305][ T1860] RBP: 0000000000040cc0 R08: ffffed1018893109 R09: dffffc0000000000
[ 2171.275973][ T1860] R10: 0000000000000001 R11: ffffed1018893108 R12: 1ffff11016a35e43
[ 2171.291039][ T1860] R13: 000000000000000b R14: 000000000000000b R15: 00000000000f4240
[ 2171.292328][ T1860] FS:  00007f53cbc83740(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000
[ 2171.293409][ T1860] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2171.294586][ T1860] CR2: 000055f540014508 CR3: 00000000b49f2004 CR4: 00000000000606e0
[ 2171.295424][ T1860] Call Trace:
[ 2171.295756][ T1860]  ? mark_held_locks+0xa5/0xe0
[ 2171.296659][ T1860]  ? __alloc_pages_slowpath+0x21b0/0x21b0
[ 2171.298283][ T1860]  ? gtp_encap_enable_socket+0x13e/0x400 [gtp]
[ 2171.298962][ T1860]  ? alloc_pages_current+0xc1/0x1a0
[ 2171.299475][ T1860]  kmalloc_order+0x22/0x80
[ 2171.299936][ T1860]  kmalloc_order_trace+0x1d/0x140
[ 2171.300437][ T1860]  __kmalloc+0x302/0x3a0
[ 2171.300896][ T1860]  gtp_newlink+0x293/0xba0 [gtp]
[ ... ]

Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp: Allow duplicate session creation with UDP

In the past it was possible to create multiple L2TPv3 sessions with the
same session id as long as the sessions belonged to different tunnels.
The resulting sessions had issues when used with IP encapsulated tunnels,
but worked fine with UDP encapsulated ones. Some applications began to
rely on this behaviour to avoid having to negotiate unique session ids.

Some time ago a change was made to require session ids to be unique across
all tunnels, breaking the applications making use of this "feature".

This change relaxes the duplicate session id check to allow duplicates
if both of the colliding sessions belong to UDP encapsulated tunnels.

Fixes: dbdbc73b4478 ("l2tp: fix duplicate session creation")
Signed-off-by: Ridge Kennedy <ridge.kennedy@alliedtelesis.co.nz>
Acked-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8152: Add MAC passthrough support to new device

Device 0xa387 also supports MAC passthrough, therefore add it to the
whitelst.

BugLink: https://bugs.launchpad.net/bugs/1827961/comments/30
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net_sched: fix an OOB access in cls_tcindex

As Eric noticed, tcindex_alloc_perfect_hash() uses cp->hash
to compute the size of memory allocation, but cp->hash is
set again after the allocation, this caused an out-of-bound
access.

So we have to move all cp->hash initialization and computation
before the memory allocation. Move cp->mask and cp->shift together
as cp->hash may need them for computation too.

Reported-and-tested-by: syzbot+35d4dea36c387813ed31@syzkaller.appspotmail.com
Fixes: 331b72922c5f ("net: sched: RCU cls_tcindex")
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

microblaze: Add ID for Microblaze v11

List Microblaze v11 from PVR.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

microblaze: Prevent the overflow of the start

In case the start + cache size is more than the max int the
start overflows.
Prevent the same.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

microblaze: Wire CMA allocator

Based on commit 04e3543e228f ("microblaze: use the generic dma coherent
remap allocator")
CMA can be easily enabled by calling dma_contiguous_reserve() at the end of
mmu_init(). High limit is end of lowmem space which is completely unused at
this point of time.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

asm-generic: Make dma-contiguous.h a mandatory include/asm header

dma-continuguous.h is generic for all architectures except arm32 which has
its own version.

Similar change was done for msi.h by commit a1b39bae16a6
("asm-generic: Make msi.h a mandatory include/asm header")

Suggested-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/linux-arm-kernel/20200117080446.GA8980@lst.de/T/#m92bb56b04161057635d4142e1b3b9b6b0a70122e
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Paul Walmsley <paul.walmsley@sifive.com> # for arch/riscv

microblaze: Sync defconfig with latest Kconfig layout

Layout was changed by commit 6210b6402f58
("kernel-hacking: group sysrq/kgdb/ubsan into 'Generic Kernel Debugging Instruments'")

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

microblaze: defconfig: Disable EXT2 driver and Enable EXT3 & EXT4 drivers

As EXT4 filesystem driver is used for handling EXT2 file systems as
well. There is no need to enable EXT2 driver. This patch disables EXT2
and enables EXT3/EXT4 drivers.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Merge tag 'rproc-v5.6' of git://git./linux/kernel/git/andersson/remoteproc

Pull remoteproc updates from Bjorn Andersson:
"This adds support for the Mediatek MT8183 SCP, modem remoteproc on
  Qualcomm SC7180 platform, audio and sensor remoteprocs on Qualcomm
  MSM8998 and audio, compute, modem and sensor remoteprocs on Qualcomm
  SM8150.

  It adds votes for necessary power-domains for all Qualcomm TrustZone
  based remoteproc instances are held, fixes a bug related to remoteproc
  drivers registering before the core has been initialized and does
  clean up the Qualcomm modem remoteproc driver"

* tag 'rproc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (21 commits)
  remoteproc: qcom: q6v5-mss: Improve readability of reset_assert
  remoteproc: qcom: q6v5-mss: Use regmap_read_poll_timeout
  remoteproc: qcom: q6v5-mss: Rename boot status timeout
  remoteproc: qcom: q6v5-mss: Improve readability across clk handling
  remoteproc: use struct_size() helper
  remoteproc: Initialize rproc_class before use
  rpmsg: add rpmsg support for mt8183 SCP.
  remoteproc/mediatek: add SCP support for mt8183
  dt-bindings: Add a binding for Mediatek SCP
  remoteproc: mss: q6v5-mss: Add modem support on SC7180
  dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding for SC7180
  remoteproc: qcom: pas: Add MSM8998 ADSP and SLPI support
  dt-bindings: remoteproc: qcom: Add ADSP and SLPI support for MSM8998 SoC
  remoteproc: q6v5-mss: Remove mem clk from the active pool
  remoteproc: qcom: Remove unneeded semicolon
  remoteproc: qcom: pas: Add auto_boot flag
  remoteproc: qcom: pas: Add SM8150 ADSP, CDSP, Modem and SLPI support
  dt-bindings: remoteproc: qcom: SM8150 Add ADSP, CDSP, MPSS and SLPI support
  remoteproc: qcom: pas: Vote for active/proxy power domains
  dt-bindings: remoteproc: qcom: Add power-domain bindings for Q6V5 PAS
  ...

Merge tag 'hwlock-v5.6' of git://git./linux/kernel/git/andersson/remoteproc

Pull hwspinlock updates from Bjorn Andersson:
"This continues the transition of drivers to device managed resources
  and removal of unnecessary PM runtime integration, with cleanups to
  the SIRF, OMAP and Qualcomm hwspinlock drivers.

  It also adds Baolin as reviewer in MAINTAINERS"

* tag 'hwlock-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
  hwspinlock: sirf: Use devm_hwspin_lock_register() to register hwlock controller
  hwspinlock: sirf: Remove redundant PM runtime functions
  hwspinlock: sirf: Change to use devm_platform_ioremap_resource()
  hwspinlock: omap: Use devm_kzalloc() to allocate memory
  hwspinlock: omap: Change to use devm_platform_ioremap_resource()
  hwspinlock: qcom: Use devm_hwspin_lock_register() to register hwlock controller
  hwspinlock: qcom: Remove redundant PM runtime functions
  hwspinlock: stm32: convert to devm_platform_ioremap_resource
  MAINTAINERS: Add myself as reviewer for the hwspinlock subsystem

qed: Remove set but not used variable 'p_link'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/net/ethernet/qlogic/qed/qed_cxt.c: In function 'qed_qm_init_pf':
drivers/net/ethernet/qlogic/qed/qed_cxt.c:1401:29: warning:
variable 'p_link' set but not used [-Wunused-but-set-variable]

commit 92fae6fb231f ("qed: FW 8.42.2.0 Queue Manager changes")
leave behind this unused variable.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'unbreak-basic-and-bpf-tdc-testcases'

Davide Caratti says:

====================
unbreak 'basic' and 'bpf' tdc testcases

- patch 1/2 fixes tdc failures with 'bpf' action on fresch clones of the
kernel tree
- patch 2/2 allow running tdc for the 'basic' classifier without tweaking
tdc_config.py
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

tc-testing: add missing 'nsPlugin' to basic.json

since tdc tests for cls_basic need $DEV1, use 'nsPlugin' so that the
following command can be run without errors:

[root@f31 tc-testing]# ./tdc.py -c basic

Fixes: 4717b05328ba ("tc-testing: Introduced tdc tests for basic filter")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tc-testing: fix eBPF tests failure on linux fresh clones

when the following command is done on a fresh clone of the kernel tree,

[root@f31 tc-testing]# ./tdc.py -c bpf

test cases that need to build the eBPF sample program fail systematically,
because 'buildebpfPlugin' is unable to install the kernel headers (i.e, the
'khdr' target fails). Pass the correct environment to 'make', in place of
ENVIR, to allow running these tests.

Fixes: 4c2d39bd40c1 ("tc-testing: use a plugin to build eBPF program")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hsr: fix possible NULL deref in hsr_handle_frame()

hsr_port_get_rcu() can return NULL, so we need to be careful.

general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
CPU: 1 PID: 10249 Comm: syz-executor.5 Not tainted 5.5.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__read_once_size include/linux/compiler.h:199 [inline]
RIP: 0010:hsr_addr_is_self+0x86/0x330 net/hsr/hsr_framereg.c:44
Code: 04 00 f3 f3 f3 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 e8 6b ff 94 f9 4c 89 f2 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 75 02 00 00 48 8b 43 30 49 39 c6 49 89 47 c0 0f
RSP: 0018:ffffc90000da8a90 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff87e0cc33
RDX: 0000000000000006 RSI: ffffffff87e035d5 RDI: 0000000000000000
RBP: ffffc90000da8b20 R08: ffff88808e7de040 R09: ffffed1015d2707c
R10: ffffed1015d2707b R11: ffff8880ae9383db R12: ffff8880a689bc5e
R13: 1ffff920001b5153 R14: 0000000000000030 R15: ffffc90000da8af8
FS: 00007fd7a42be700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b32338000 CR3: 00000000a928c000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
hsr_handle_frame+0x1c5/0x630 net/hsr/hsr_slave.c:31
__netif_receive_skb_core+0xfbc/0x30b0 net/core/dev.c:5099
__netif_receive_skb_one_core+0xa8/0x1a0 net/core/dev.c:5196
__netif_receive_skb+0x2c/0x1d0 net/core/dev.c:5312
process_backlog+0x206/0x750 net/core/dev.c:6144
napi_poll net/core/dev.c:6582 [inline]
net_rx_action+0x508/0x1120 net/core/dev.c:6650
__do_softirq+0x262/0x98c kernel/softirq.c:292
do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1082
</IRQ>

Fixes: c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'akpm' (patches from Andrew)

Merge more updates from Andrew Morton:
"The rest of MM and the rest of everything else: hotfixes, ipc, misc,
  procfs, lib, cleanups, arm"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (67 commits)
  ARM: dma-api: fix max_pfn off-by-one error in __dma_supported()
  treewide: remove redundant IS_ERR() before error code check
  include/linux/cpumask.h: don't calculate length of the input string
  lib: new testcases for bitmap_parse{_user}
  lib: rework bitmap_parse()
  lib: make bitmap_parse_user a wrapper on bitmap_parse
  lib: add test for bitmap_parse()
  bitops: more BITS_TO_* macros
  lib/string: add strnchrnul()
  proc: convert everything to "struct proc_ops"
  proc: decouple proc from VFS with "struct proc_ops"
  asm-generic/tlb: provide MMU_GATHER_TABLE_FREE
  asm-generic/tlb: rename HAVE_MMU_GATHER_NO_GATHER
  asm-generic/tlb: rename HAVE_MMU_GATHER_PAGE_SIZE
  asm-generic/tlb: rename HAVE_RCU_TABLE_FREE
  asm-generic/tlb: add missing CONFIG symbol
  asm-gemeric/tlb: remove stray function declarations
  asm-generic/tlb: avoid potential double flush
  mm/mmu_gather: invalidate TLB correctly on batch allocation failure and flush
  powerpc/mmu_gather: enable RCU_TABLE_FREE even for !SMP case
  ...

Merge tag 'drm-next-2020-02-04' of git://anongit.freedesktop.org/drm/drm

Pull drm ttm/mm updates from Dave Airlie:
"Thomas Hellstrom has some more changes to the TTM layer that needed a
  patch to the mm subsystem.

  This adds a new mm API vmf_insert_mixed_prot to avoid an ugly hack
  that has limitations in the TTM layer"

* tag 'drm-next-2020-02-04' of git://anongit.freedesktop.org/drm/drm:
  mm, drm/ttm: Fix vm page protection handling
  mm: Add a vmf_insert_mixed_prot() function

Merge tag 'tag-chrome-platform-for-v5.6' of git://git./linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Benson Leung:
"CrOS EC:

   - Refactoring of some of cros_ec's headers:

     include/linux/mfd/cros_ec.h now removed, new cros_ec.h added to
     drivers/platform/chrome which contains shared operations of cros_ec
     transport drivers.

   - Response tracing in cros_ec_proto

  Wilco EC:

   - Fix unregistration order.

   - Fix keyboard backlight probing on systems without keyboard
     backlight

   - Minor cleanup (newlines in printks, COMPILE_TEST)

  Misc:

   - chromeos_laptop converted to use i2c_new_scanned_device instead of
     i2c_new_probed_device"

* tag 'tag-chrome-platform-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: cros_ec: Match implementation with headers
  platform/chrome: cros_ec: Drop unaligned.h include
  platform/chrome: wilco_ec: Allow wilco to be compiled in COMPILE_TEST
  platform/chrome: wilco_ec: Add newlines to printks
  platform/chrome: wilco_ec: Fix unregistration order
  cros_ec: treewide: Remove 'include/linux/mfd/cros_ec.h'
  platform/chrome: cros_ec_ishtp: Make init_lock static
  platform/chrome: chromeos_laptop: Convert to i2c_new_scanned_device
  platform/chrome: cros_ec_lpc: Use platform_get_irq_optional() for optional IRQs
  platform/chrome: cros_ec_proto: Add response tracing
  platform/chrome: cros_ec_trace: Match trace commands with EC commands

Merge tag 'rtc-5.6' of git://git./linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
"The VL_READ and VL_CLR ioctls have been reworked to be more useful.
  This will not break userspace as there are very few users and they are
  using the integer value as a boolean.

  Apart from that, two drivers were reworked and a few fixes here and
  there for a net reduction of number of lines.

  Summary:

  Subsystem:
   - the VL_READ and VL_CLR ioctls are now documented and their behavior
     is unified across all the drivers.
   - RTC_I2C_AND_SPI Kconfig option rework to avoid selecting both
     REGMAP_I2C and REGMAP_SPI unecessarily.

  Drivers:
   - at91rm9200: remove deprecated procfs, add sam9x60, sama5d4 and
     sama5d2 compatibles.
   - cmos: solve lost interrupts issue on MS Surface 3
   - hym8563: return proper errno when time is invalid
   - rv3029: many fixes, nvram support"

* tag 'rtc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (63 commits)
  dt-bindings: rtc: at91rm9200: document clocks property
  rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
  rtc: Kconfig: select REGMAP_I2C when necessary
  rtc: Kconfig: properly indent sd3078 entry
  rtc: cmos: Refactor code by using the new dmi_get_bios_year() helper
  rtc: cmos: Use predefined value for RTC IRQ on legacy x86
  rtc: cmos: Stop using shared IRQ
  rtc: tps6586x: Use IRQ_NOAUTOEN flag
  rtc: at91rm9200: use FIELD_PREP/FIELD_GET
  rtc: at91rm9200: avoid time readout in at91_rtc_setalarm
  rtc: at91rm9200: move register definitions to C file
  rtc: at91rm9200: add sama5d4 and sama5d2 compatibles
  dt-bindings: rtc: at91rm9200: convert bindings to json-schema
  rtc: at91rm9200: remove procfs information
  dt-bindings: atmel, at91rm9200-rtc: add microchip, sam9x60-rtc
  rtc: pcf8563: Use BIT
  rtc: moxart: Convert to SPDX identifier
  rtc: ds1343: Remove unused struct spi_device in struct ds1343_priv
  rtc: rx8025: Remove struct i2c_client from struct rx8025_data
  rtc: hym8563: Read the valid flag directly instead of caching it
  ...

ARM: dma-api: fix max_pfn off-by-one error in __dma_supported()

max_pfn, as set in arch/arm/mm/init.c:

    static void __init find_limits(unsigned long *min,
   unsigned long *max_low,
   unsigned long *max_high)
    {
    *max_low = PFN_DOWN(memblock_get_current_limit());
    *min = PFN_UP(memblock_start_of_DRAM());
    *max_high = PFN_DOWN(memblock_end_of_DRAM());
    }

with memblock_end_of_DRAM() pointing to the next byte after DRAM.  As
such, max_pfn points to the PFN after the end of DRAM.

Thus when using max_pfn to check DMA masks, we should subtract one when
checking DMA ranges against it.

Commit 8bf1268f48ad ("ARM: dma-api: fix off-by-one error in
__dma_supported()") fixed the same issue, but missed this spot.

This issue was found while working on the sun4i-csi v4l2 driver on the
Allwinner R40 SoC.  On Allwinner SoCs, DRAM is offset at 0x40000000, and
we are starting to use of_dma_configure() with the "dma-ranges" property
in the device tree to have the DMA API handle the offset.

In this particular instance, dma-ranges was set to the same range as the
actual available (2 GiB) DRAM.  The following error appeared when the
driver attempted to allocate a buffer:

    sun4i-csi 1c09000.csi: Coherent DMA mask 0x7fffffff (pfn 0x40000-0xc0000)
    covers a smaller range of system memory than the DMA zone pfn 0x0-0xc0001
    sun4i-csi 1c09000.csi: dma_alloc_coherent of size 307200 failed

Fixing the off-by-one error makes things work.

Link: http://lkml.kernel.org/r/20191224030239.5656-1-wens@kernel.org
Fixes: 11a5aa32562e ("ARM: dma-mapping: check DMA mask against available memory")
Fixes: 9f28cde0bc64 ("ARM: another fix for the DMA mapping checks")
Fixes: ab746573c405 ("ARM: dma-mapping: allow larger DMA mask than supported")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

treewide: remove redundant IS_ERR() before error code check

'PTR_ERR(p) == -E*' is a stronger condition than IS_ERR(p).
Hence, IS_ERR(p) is unneeded.

The semantic patch that generates this commit is as follows:

// <smpl>
@@
expression ptr;
constant error_code;
@@
-IS_ERR(ptr) && (PTR_ERR(ptr) == - error_code)
+PTR_ERR(ptr) == - error_code
// </smpl>

Link: http://lkml.kernel.org/r/20200106045833.1725-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Acked-by: Stephen Boyd <sboyd@kernel.org> [drivers/clk/clk.c]
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> [GPIO]
Acked-by: Wolfram Sang <wsa@the-dreams.de> [drivers/i2c]
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [acpi/scan.c]
Acked-by: Rob Herring <robh@kernel.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/cpumask.h: don't calculate length of the input string

New design of inner bitmap_parse() allows to avoid calculating the size of
a null-terminated string.

Link: http://lkml.kernel.org/r/20200102043031.30357-8-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Amritha Nambiar <amritha.nambiar@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: "Tobin C . Harding" <tobin@kernel.org>
Cc: Vineet Gupta <vineet.gupta1@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: new testcases for bitmap_parse{_user}

New version of bitmap_parse() is unified with bitmap_parse_list(),
and therefore:

- weakens rules on whitespaces and commas between hex chunks;

- in addition to

- allows passing UINT_MAX or any other big number as the length of input
string instead of actual string length.

The patch covers the cases.

Link: http://lkml.kernel.org/r/20200102043031.30357-7-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Amritha Nambiar <amritha.nambiar@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: "Tobin C . Harding" <tobin@kernel.org>
Cc: Vineet Gupta <vineet.gupta1@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: rework bitmap_parse()

bitmap_parse() is ineffective and full of opaque variables and opencoded
parts.  It leads to hard understanding and usage of it.  This rework
includes:

- remove bitmap_shift_left() call from the cycle.  Now it makes the
  complexity of the algorithm as O(nbits^2).  In the suggested approach
  the input string is parsed in reverse direction, so no shifts needed;

- relax requirement on a single comma and no white spaces between
  chunks.  It is considered useful in scripting, and it aligns with
  bitmap_parselist();

- split bitmap_parse() to small readable helpers;

- make an explicit calculation of the end of input line at the
  beginning, so users of the bitmap_parse() won't bother doing this.

Link: http://lkml.kernel.org/r/20200102043031.30357-6-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Cc: Amritha Nambiar <amritha.nambiar@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: "Tobin C . Harding" <tobin@kernel.org>
Cc: Vineet Gupta <vineet.gupta1@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: make bitmap_parse_user a wrapper on bitmap_parse

Currently we parse user data byte after byte which leads to
overcomplicating of parsing algorithm. There are no performance critical
users of bitmap_parse_user(), and so we can duplicate user data to kernel
buffer and simply call bitmap_parselist(). This rework lets us unify and
simplify bitmap_parse() and bitmap_parse_user(), which is done in the
following patch.

Link: http://lkml.kernel.org/r/20200102043031.30357-5-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Amritha Nambiar <amritha.nambiar@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: "Tobin C . Harding" <tobin@kernel.org>
Cc: Vineet Gupta <vineet.gupta1@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: add test for bitmap_parse()

The test is derived from bitmap_parselist() NO_LEN is reserved for use in
following patches.

[yury.norov@gmail.com: fix rebase issue]
Link: http://lkml.kernel.org/r/20200102182659.6685-1-yury.norov@gmail.com
[andriy.shevchenko@linux.intel.com: fix address space when test user buffer]
Link: http://lkml.kernel.org/r/20200109103601.45929-2-andriy.shevchenko@linux.intel.com
Link: http://lkml.kernel.org/r/20200102043031.30357-4-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Amritha Nambiar <amritha.nambiar@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: "Tobin C . Harding" <tobin@kernel.org>
Cc: Vineet Gupta <vineet.gupta1@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

bitops: more BITS_TO_* macros

Introduce BITS_TO_U64, BITS_TO_U32 and BITS_TO_BYTES as they are handy in
the following patches (BITS_TO_U32 specifically). Reimplement tools/
version of the macros according to the kernel implementation.

Also fix indentation for BITS_PER_TYPE definition.

Link: http://lkml.kernel.org/r/20200102043031.30357-3-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Amritha Nambiar <amritha.nambiar@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: "Tobin C . Harding" <tobin@kernel.org>
Cc: Vineet Gupta <vineet.gupta1@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/string: add strnchrnul()

Patch series "lib: rework bitmap_parse", v5.

Similarl to the recently revisited bitmap_parselist(), bitmap_parse() is
ineffective and overcomplicated.  This series reworks it, aligns its
interface with bitmap_parselist() and makes it simpler to use.

The series also adds a test for the function and fixes usage of it in
cpumask_parse() according to the new design - drops the calculating of
length of an input string.

bitmap_parse() takes the array of numbers to be put into the map in the BE
order which is reversed to the natural LE order for bitmaps.  For example,
to construct bitmap containing a bit on the position 42, we have to put a
line '400,0'.  Current implementation reads chunk one by one from the
beginning ('400' before '0') and makes bitmap shift after each successful
parse.  It makes the complexity of the whole process as O(n^2).  We can do
it in reverse direction ('0' before '400') and avoid shifting, but it
requires reverse parsing helpers.

This patch (of 7):

New function works like strchrnul() with a length limited string.

Link: http://lkml.kernel.org/r/20200102043031.30357-2-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Amritha Nambiar <amritha.nambiar@intel.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Tobin C . Harding" <tobin@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Vineet Gupta <vineet.gupta1@synopsys.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: convert everything to "struct proc_ops"

The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in
seq_file.h.

Conversion rule is:

llseek => proc_lseek
unlocked_ioctl => proc_ioctl

xxx => proc_xxx

delete ".owner = THIS_MODULE" line

[akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c]
[sfr@canb.auug.org.au: fix kernel/sched/psi.c]
Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au
Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: decouple proc from VFS with "struct proc_ops"

Currently core /proc code uses "struct file_operations" for custom hooks,
however, VFS doesn't directly call them.  Every time VFS expands
file_operations hook set, /proc code bloats for no reason.

Introduce "struct proc_ops" which contains only those hooks which /proc
allows to call into (open, release, read, write, ioctl, mmap, poll).  It
doesn't contain module pointer as well.

Save ~184 bytes per usage:

add/remove: 26/26 grow/shrink: 1/4 up/down: 1922/-6674 (-4752)
Function                                     old     new   delta
sysvipc_proc_ops                               -      72     +72
...
config_gz_proc_ops                             -      72     +72
proc_get_inode                               289     339     +50
proc_reg_get_unmapped_area                   110     107      -3
close_pdeo                                   227     224      -3
proc_reg_open                                289     284      -5
proc_create_data                              60      53      -7
rt_cpu_seq_fops                              256       -    -256
...
default_affinity_proc_fops                   256       -    -256
Total: Before=5430095, After=5425343, chg -0.09%

Link: http://lkml.kernel.org/r/20191225172228.GA13378@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

asm-generic/tlb: provide MMU_GATHER_TABLE_FREE

As described in the comment, the correct order for freeing pages is:

1) unhook page
2) TLB invalidate page
3) free page

This order equally applies to page directories.

Currently there are two correct options:

- use tlb_remove_page(), when all page directores are full pages and
   there are no futher contraints placed by things like software
   walkers (HAVE_FAST_GUP).

- use MMU_GATHER_RCU_TABLE_FREE and tlb_remove_table() when the
   architecture does not do IPI based TLB invalidate and has
   HAVE_FAST_GUP (or software TLB fill).

This however leaves architectures that don't have page based directories
but don't need RCU in a bind.  For those, provide MMU_GATHER_TABLE_FREE,
which provides the independent batching for directories without the
additional RCU freeing.

Link: http://lkml.kernel.org/r/20200116064531.483522-10-aneesh.kumar@linux.ibm.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

asm-generic/tlb: rename HAVE_MMU_GATHER_NO_GATHER

Towards a more consistent naming scheme.

Link: http://lkml.kernel.org/r/20200116064531.483522-9-aneesh.kumar@linux.ibm.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

asm-generic/tlb: rename HAVE_MMU_GATHER_PAGE_SIZE

Towards a more consistent naming scheme.

Link: http://lkml.kernel.org/r/20200116064531.483522-8-aneesh.kumar@linux.ibm.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

asm-generic/tlb: rename HAVE_RCU_TABLE_FREE

Towards a more consistent naming scheme.

[akpm@linux-foundation.org: fix sparc64 Kconfig]
Link: http://lkml.kernel.org/r/20200116064531.483522-7-aneesh.kumar@linux.ibm.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

asm-generic/tlb: add missing CONFIG symbol

Without this the symbol will not actually end up in .config files.

Link: http://lkml.kernel.org/r/20200116064531.483522-6-aneesh.kumar@linux.ibm.com
Fixes: a30e32bd79e9 ("asm-generic/tlb: Provide generic tlb_flush() based on flush_tlb_mm()")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

asm-gemeric/tlb: remove stray function declarations

We removed the actual functions a while ago.

Link: http://lkml.kernel.org/r/20200116064531.483522-5-aneesh.kumar@linux.ibm.com
Fixes: 1808d65b55e4 ("asm-generic/tlb: Remove arch_tlb*_mmu()")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

asm-generic/tlb: avoid potential double flush

Aneesh reported that:

tlb_flush_mmu()
  tlb_flush_mmu_tlbonly()
    tlb_flush() <-- #1
  tlb_flush_mmu_free()
    tlb_table_flush()
      tlb_table_invalidate()
tlb_flush_mmu_tlbonly()
  tlb_flush() <-- #2

does two TLBIs when tlb->fullmm, because __tlb_reset_range() will not
clear tlb->end in that case.

Observe that any caller to __tlb_adjust_range() also sets at least one of
the tlb->freed_tables || tlb->cleared_p* bits, and those are
unconditionally cleared by __tlb_reset_range().

Change the condition for actually issuing TLBI to having one of those bits
set, as opposed to having tlb->end != 0.

Link: http://lkml.kernel.org/r/20200116064531.483522-4-aneesh.kumar@linux.ibm.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reported-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mmu_gather: invalidate TLB correctly on batch allocation failure and flush

Architectures for which we have hardware walkers of Linux page table
should flush TLB on mmu gather batch allocation failures and batch flush.
Some architectures like POWER supports multiple translation modes (hash
and radix) and in the case of POWER only radix translation mode needs the
above TLBI.  This is because for hash translation mode kernel wants to
avoid this extra flush since there are no hardware walkers of linux page
table.  With radix translation, the hardware also walks linux page table
and with that, kernel needs to make sure to TLB invalidate page walk cache
before page table pages are freed.

More details in commit d86564a2f085 ("mm/tlb, x86/mm: Support invalidating
TLB caches for RCU_TABLE_FREE")

The changes to sparc are to make sure we keep the old behavior since we
are now removing HAVE_RCU_TABLE_NO_INVALIDATE.  The default value for
tlb_needs_table_invalidate is to always force an invalidate and sparc can
avoid the table invalidate.  Hence we define tlb_needs_table_invalidate to
false for sparc architecture.

Link: http://lkml.kernel.org/r/20200116064531.483522-3-aneesh.kumar@linux.ibm.com
Fixes: a46cc7a90fd8 ("powerpc/mm/radix: Improve TLB/PWC flushes")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: <stable@vger.kernel.org> [4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

powerpc/mmu_gather: enable RCU_TABLE_FREE even for !SMP case

Patch series "Fixup page directory freeing", v4.

This is a repost of patch series from Peter with the arch specific changes
except ppc64 dropped.  ppc64 changes are added here because we are redoing
the patch series on top of ppc64 changes.  This makes it easy to backport
these changes.  Only the first 2 patches need to be backported to stable.

The thing is, on anything SMP, freeing page directories should observe the
exact same order as normal page freeing:

1) unhook page/directory
2) TLB invalidate
3) free page/directory

Without this, any concurrent page-table walk could end up with a
Use-after-Free.  This is esp.  trivial for anything that has software
page-table walkers (HAVE_FAST_GUP / software TLB fill) or the hardware
caches partial page-walks (ie.  caches page directories).

Even on UP this might give issues since mmu_gather is preemptible these
days.  An interrupt or preempted task accessing user pages might stumble
into the free page if the hardware caches page directories.

This patch series fixes ppc64 and add generic MMU_GATHER changes to
support the conversion of other architectures.  I haven't added patches
w.r.t other architecture because they are yet to be acked.

This patch (of 9):

A followup patch is going to make sure we correctly invalidate page walk
cache before we free page table pages.  In order to keep things simple
enable RCU_TABLE_FREE even for !SMP so that we don't have to fixup the
!SMP case differently in the followup patch

!SMP case is right now broken for radix translation w.r.t page walk
cache flush.  We can get interrupted in between page table free and
that would imply we have page walk cache entries pointing to tables
which got freed already.  Michael said "both our platforms that run on
Power9 force SMP on in Kconfig, so the !SMP case is unlikely to be a
problem for anyone in practice, unless they've hacked their kernel to
build it !SMP."

Link: http://lkml.kernel.org/r/20200116064531.483522-2-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>