Erwan Velu [Mon, 30 Nov 2009 11:24:40 +0000 (12:24 +0100)]
dmi: More cpu upgrade options
Impact: many cpu upgrade were set out of spec
Fixing stupid typo which prevent cpu upgrade options to be shown
Erwan Velu [Mon, 30 Nov 2009 10:18:36 +0000 (11:18 +0100)]
hdt: removing vendor_id from cpu info
Impact: visual
No need to display the vendor_id as we already show the vendor name.
That confuse users, let's remove it
Erwan Velu [Mon, 30 Nov 2009 10:02:49 +0000 (11:02 +0100)]
pci: replace '-' by '_' in modules names
Impact: avoid kernel modules duplication
In modules.pcimap, kernel modules name are featuring '_' or '-' whereas modules.alias is only using '_'.
To avoid kernel modules duplication, let's rename all '-' by '_' to match what modules.alias provides
This avoid stupid duplications like "a-b" & "a_b" whereas they are in
fact the same kernel module
Erwan Velu [Mon, 30 Nov 2009 09:07:02 +0000 (10:07 +0100)]
hdt: Adding memtest entry in the menu
Imapct: Allow people starting memtest from the menu
Users can now starts memtest for our menu
Erwan Velu [Sun, 29 Nov 2009 20:40:29 +0000 (21:40 +0100)]
hdt: EDD uses hex numbers, not decimal
Impact: Fixing commit
4d2536e76d621bc7c5faa076a905051854f9c512
Commit
4d2536e76d621bc7c5faa076a905051854f9c512 was buggy as considering
EDD as decimal and not hex.
Erwan Velu [Sun, 29 Nov 2009 20:13:00 +0000 (21:13 +0100)]
hdt: Fixing cpu flags splitting
Impact: improve rendering
Under the cli, the cpu flags were sometimes leaking to another line
Erwan Velu [Sun, 29 Nov 2009 19:48:41 +0000 (20:48 +0100)]
Adding ifcpu.c32, removing ifcpuhvm
Impact: ifcpu holds more cases
ifcpu allow users defining a set of required cpu features for booting an
entry
Erwan Velu [Sun, 29 Nov 2009 14:35:13 +0000 (15:35 +0100)]
hdt: Adding gPXE detection
Impact: gPXE is now detected
HDT is now able to report is gPXE is loaded on this given system
Erwan Velu [Sun, 29 Nov 2009 14:20:33 +0000 (15:20 +0100)]
com32: Avoid gpxe detection code duplication
Impact: avoid code duplication
This will make code more generic, hdt will need it ;)
Erwan Velu [Sun, 29 Nov 2009 13:38:43 +0000 (14:38 +0100)]
hdt: Do not display hostbus & interface for EDD<3
Impact: Avoid corruption while displaying host bus interface when
EDD<3.0
If EDD < 3.0 displaying host bus & interface for disk devices return
unexpected content. We have to avoid displaying that informations in
such case
Erwan Velu [Sun, 29 Nov 2009 13:14:19 +0000 (14:14 +0100)]
hdt: Fixing wrong Part Number display
Impact: Visual
In the memory bank display, the part number wasn't correctly padded.
Erwan Velu [Sun, 29 Nov 2009 13:11:09 +0000 (14:11 +0100)]
hdt: Keeping symlinks on generated binaries
Impact: none
Building binary images let some symlinks useful for testing
Erwan Velu [Sun, 29 Nov 2009 13:07:52 +0000 (14:07 +0100)]
hdt: Preventing agressive disk's size rounding
Impact: Visual
Prevent reported case where 1997MB could be displayed as 1GB.
Erwan Velu [Sat, 28 Nov 2009 12:22:03 +0000 (13:22 +0100)]
hdt: Adding memtest is our binary images
Impact: memtest is now included
Downloading memtest while generating floppy/iso images
Erwan Velu [Fri, 27 Nov 2009 21:22:18 +0000 (22:22 +0100)]
Fixing comments on ifcpu64/ifcpuhvm
Impact: Fixing typo
Fixing typo
Erwan Velu [Fri, 27 Nov 2009 21:12:40 +0000 (22:12 +0100)]
Adding ifcpuhvm.c32
Impact: new module to boot hvm systems
This module allow users to define a boot entry regarding if the cpu is
supporting hvm (vmx|svm). This could used to boot xen, or any hypervisor
Erwan Velu [Fri, 27 Nov 2009 19:41:16 +0000 (20:41 +0100)]
hdt: Fixing cpu cores naming
Impact: Visual
Fixing cpu cores naming
Erwan Velu [Fri, 27 Nov 2009 19:30:51 +0000 (20:30 +0100)]
hdt: Adding 'release' target to Makefil
Impact: Automate releasing files
'make release' will generate the proper binaries
Erwan Velu [Fri, 27 Nov 2009 19:21:05 +0000 (20:21 +0100)]
hdt: 0.3.6-pre2
Impact: new subrelease
New subrelease
Erwan Velu [Fri, 27 Nov 2009 19:11:34 +0000 (20:11 +0100)]
hdt: Adding cpu cache management
Impact: Adding cpu cache
CPU cache is now visible from HDT
Erwan Velu [Fri, 27 Nov 2009 18:47:46 +0000 (19:47 +0100)]
cpuid: Adding L1 & L2 cache detection
Impact: Adding L1 & L2 cache detection
Adding L1 & L2 cache detection
Erwan Velu [Fri, 27 Nov 2009 15:09:01 +0000 (16:09 +0100)]
hdt: Fixing memory detection
Impact: Fix memory detection under cli
Under the CLI, the memory detection wasn't started...
This commit fixes the memory initialisation path
Erwan Velu [Fri, 27 Nov 2009 14:53:07 +0000 (15:53 +0100)]
hdt: Adding cpu core management
Impact: we now display the number of cores
CPU cores are now displayed
Erwan Velu [Fri, 27 Nov 2009 14:44:33 +0000 (15:44 +0100)]
cpuid: Adding cpu core detection
Impact: we are now able to detect the number of cpu cores
We can detect the number of cores using cpuid(4) or cpuid_ecx(0x80000008)
Erwan Velu [Fri, 27 Nov 2009 10:45:46 +0000 (11:45 +0100)]
hdt: Improving cpu flags report
Impact: more cpu flags detected
This commit allow hdt reporting more cpu flags but also simplify from
the developer point of view the cpu flags reporting.
A visual improvement is also done for showing lists of cpu flags.
Erwan Velu [Fri, 27 Nov 2009 09:10:52 +0000 (10:10 +0100)]
cpuid: Adding more flags
Impact: sync with linux kernel
cpu flags are now in sync with the linux kernel. Too many flags were
missing.
Erwan Velu [Thu, 26 Nov 2009 22:44:22 +0000 (23:44 +0100)]
hdt: show error message when no disk is found
Impact: Visual
Display an error message when no disk is found on the system
Erwan Velu [Thu, 26 Nov 2009 22:14:51 +0000 (23:14 +0100)]
hdt: Adding CODENAME in title (menu.c32)
Impact: visual
Let's display the CODENAME in the menu title
Erwan Velu [Thu, 26 Nov 2009 22:06:35 +0000 (23:06 +0100)]
hdt: clear_screen have to reset the xy position
Impact: visual
This commit avoid clear_screen letting the cursor at the same place
after the clearing. It have to be reset to
Erwan Velu [Thu, 26 Nov 2009 21:25:34 +0000 (22:25 +0100)]
hdt: Auto generating versions for menu mode
Impact: visual
The menu mode now display the current version
Erwan Velu [Thu, 26 Nov 2009 20:41:26 +0000 (21:41 +0100)]
hdt: Adding vesa mode switching under CLI
Impact: its now possible to switch the vesa mode
Users can use vesa>enable to switch to vesa mode or
vesa>disable to switch to console mode
Erwan Velu [Thu, 26 Nov 2009 20:27:40 +0000 (21:27 +0100)]
hdt: Improving help messages' display in menu
Impact: Visual
Help messages need a space for increasing readbility
Erwan Velu [Thu, 26 Nov 2009 20:23:07 +0000 (21:23 +0100)]
hdt: Improving menu layout
Impact: visual
Improving layout. Thx gert.
Erwan Velu [Thu, 26 Nov 2009 20:07:37 +0000 (21:07 +0100)]
hdt: Adding a menu for floppy & iso images
Impact: none
Floppy & ISO images are now featuring a menu mode.
Thx gert for this idea.
Erwan Velu [Thu, 26 Nov 2009 19:14:18 +0000 (20:14 +0100)]
hdt: Fixing typo in variable's name
Impact: Building is working again
Ooops ....
Erwan Velu [Thu, 26 Nov 2009 15:48:35 +0000 (16:48 +0100)]
hdt: Adding novesa for future use
Impact: none
In a close future, as vesa will be enabled by default, let's anticipate
the novesa command
Erwan Velu [Wed, 25 Nov 2009 23:01:12 +0000 (00:01 +0100)]
hdt: print_history have to use more_printf
Impact: managing scrolling in history()
History can generates some scrolling, so let's use more_printf
Erwan Velu [Wed, 25 Nov 2009 22:50:03 +0000 (23:50 +0100)]
hdt: Fixing history behavior to match bash's one
Impact: history usage is more obvious
History (up/down) is more intiutive and copy bash's behavior
Erwan Velu [Wed, 25 Nov 2009 22:10:34 +0000 (23:10 +0100)]
hdt: Adding history command
Impact: new command 'history'
This command allow to see the content of the history
Erwan Velu [Wed, 25 Nov 2009 21:35:04 +0000 (22:35 +0100)]
hdt: reworking history to prevent corruption
Impact: avoid history corruption
No need to copy history to input. We can directly use the history stack.
Steffen Winterfeldt [Thu, 26 Nov 2009 20:00:17 +0000 (21:00 +0100)]
gfxboot.c32
Ok, here is the first try to turn the gfxboot wrapper into a com32 module. I
had to extend the interface to the gfxboot core a bit to get it working. So
it works only with latest gfxboot from
git://gitorious.org/gfxboot/gfxboot.git
Steffen
Signed-off-by: Sebastian Herbszt <herbszt@gmx.de>
Sebastian Herbszt [Fri, 20 Nov 2009 14:42:19 +0000 (15:42 +0100)]
pcitest: fix wrong statements about file location
Impact: Visual
The module tries to access the files in the current directory.
So this patch fixes the error message accordingly.
Erwan Velu [Tue, 24 Nov 2009 12:42:41 +0000 (13:42 +0100)]
gpllibs: Running Nindent
Impact: visual
Running Nindent on gpllib / gplinclude
Erwan Velu [Tue, 24 Nov 2009 09:26:28 +0000 (10:26 +0100)]
Merge branch 'master' of ssh://terminus.zytor.com//pub/git/users/erwan/hdt
Erwan Velu [Tue, 24 Nov 2009 09:24:49 +0000 (10:24 +0100)]
hdt: Running Nindent
Impact: Visual cleanup
HDT now uses the same indent as syslinux
Erwan Velu [Tue, 24 Nov 2009 09:05:48 +0000 (10:05 +0100)]
Merge remote branch 'pam/hdt-0.3.6'
Pierre-Alexandre Meyer [Tue, 24 Nov 2009 02:40:01 +0000 (18:40 -0800)]
hdt: fix memory corruption in the CLI
More memory corruption with overlooked. parse_command_line and
expand_aliases both allocate memory (for command, module, argc and argv).
We did fix the memory corruption for the autocompletion feature but
but didn't do it for the actual execution of the commands.
Signed-off-by: Pierre-Alexandre Meyer <pierre@ning.com>
root [Mon, 23 Nov 2009 21:04:05 +0000 (22:04 +0100)]
memory: Commenting workaround
Impact: none
HDT is using a memory detection code which duplicates some syslinux
code. Once addr_t will be moved into 64bit, this can be removed by using
syslinux_scan_memory().
Erwan Velu [Mon, 23 Nov 2009 16:16:41 +0000 (17:16 +0100)]
hdt: replacing e88 by 88
Impact: e88 doesn't have any meaning
Fixing e88 by 88
Erwan Velu [Mon, 23 Nov 2009 14:16:32 +0000 (15:16 +0100)]
hdt: Rounding detected memory size
Impact: Visual
Rounding values to have more realistic values
Erwan Velu [Mon, 23 Nov 2009 12:44:51 +0000 (13:44 +0100)]
hdt: Improving memory detection
Impact: Detect memory size even if dmi is broken
This commit uses e820/e801/e88 memory detection to find the memory size.
That allow to display the memory size even if the dmi table is broken
Erwan Velu [Mon, 23 Nov 2009 12:39:55 +0000 (13:39 +0100)]
memory: Adding memory size detection
Impact: allow com32 module to detect the amount of memory installed
This commit adds several function:
sanitize_e820_map() to generate a new e820 map that doesn't have
overlaping
memsize_e820() to detect the available memory (in KB)
detect_memsize() to detect the amount of memory by using e820/e801/e88.
It first try to detect the memory via e820. If it fails, it uses e801 as
fallback. If this e801 fails, e88 is used.
Erwan Velu [Sun, 22 Nov 2009 21:48:49 +0000 (22:48 +0100)]
hdt: Cleaning mbr_ids
Impact: none
Let's just clean mbr_ids as we do for the orther structures
Erwan Velu [Sun, 22 Nov 2009 21:30:57 +0000 (22:30 +0100)]
hdt: More coherency in messages
Impact: more coherency
More coherency in messages
Erwan Velu [Sun, 22 Nov 2009 21:26:10 +0000 (22:26 +0100)]
hdt: Adding more coherency in memory messages
Impact: more coherency
More coherency in memory messages
Erwan Velu [Sun, 22 Nov 2009 20:57:47 +0000 (21:57 +0100)]
hdt: memory menu have to be shown in every case
Impact: memory menu have to be always visible
In virtualbox, dmi table isn't correctly feed. In that situation, the
memory menu isn't displayed whereas e88, e820 & e801 are present.
So let's remove the condition where the memory menu have to be shown
only when memory modules are detected.
Tested by Gert.
Erwan Velu [Sun, 22 Nov 2009 20:50:46 +0000 (21:50 +0100)]
hdt: Renaming "show 88" to "show e88"
Impact: increasing coherency
Let's rename that function to keep more coherency with e820 & e801
Erwan Velu [Sun, 22 Nov 2009 18:27:21 +0000 (19:27 +0100)]
Merge remote branch 'pam/hdt-0.3.6'
Pierre-Alexandre Meyer [Sun, 22 Nov 2009 00:49:37 +0000 (16:49 -0800)]
gpllib: mbr: fix grub2 detection
gerth reports that hdt-0.3.6 doesn't detect grub2 anymore.
It looks like some break were missing in the case statement.
Signed-off-by: Pierre-Alexandre Meyer <pierre@mouraf.org>
Erwan Velu [Sat, 21 Nov 2009 11:37:08 +0000 (12:37 +0100)]
hdt: Only copy needed art files
Impact: Reduces binary image size
This commit only copy the needed art files to put in the floppy/iso
images.
Erwan Velu [Sat, 21 Nov 2009 11:34:53 +0000 (12:34 +0100)]
hdt: Allow user to override the background image
Impact: none
This commit allow user using vesa=<filename> to override the background
image in vesa mode
Erwan Velu [Fri, 20 Nov 2009 22:14:00 +0000 (23:14 +0100)]
Merge remote branch 'hpa/master'
Erwan Velu [Fri, 20 Nov 2009 21:54:16 +0000 (22:54 +0100)]
hdt: Adding another logo
Impact: none
Adding another logo (black)
Erwan Velu [Fri, 20 Nov 2009 21:50:50 +0000 (22:50 +0100)]
hdt: Adding logo
Impact: none
Adding transparent logo
Erwan Velu [Fri, 20 Nov 2009 21:35:41 +0000 (22:35 +0100)]
hdt: Updating contributors
Impact: Visual
Adding Alexander Andino for design. Adding other contributors's role
Erwan Velu [Fri, 20 Nov 2009 21:33:55 +0000 (22:33 +0100)]
hdt: fixing wrong type
Impact: Avoid compilation error
Fixing return type
Erwan Velu [Fri, 20 Nov 2009 21:13:28 +0000 (22:13 +0100)]
hdt: 0.3.6-pre1
Impact: Pre-release
Releasing 0.3.6-pre1
Erwan Velu [Fri, 20 Nov 2009 21:00:50 +0000 (22:00 +0100)]
hdt: Adding background image for the CLI
Impact: Visual
The cli now features a background image when started in vesa mode
Erwan Velu [Fri, 20 Nov 2009 15:49:42 +0000 (16:49 +0100)]
hdt: Adding vesa mode support
Impact: cli can now be turned into vesa
Using the "vesa" keyword at boot time, you can enable the vesa mode for
the cli.
Erwan Velu [Fri, 20 Nov 2009 15:37:36 +0000 (16:37 +0100)]
hdt: hdt.img must use 8.3 naming
Impact: Loading files is now working again
Prior to that commit, the hdt.img was failing loading files
H. Peter Anvin [Fri, 20 Nov 2009 04:17:43 +0000 (20:17 -0800)]
memdisk: pptr->cd_pkt.sect_count is in virtual sectors
Per the El Torito spec, pptr->cd_pkt.sect_count are in virtual
sectors, i.e. 512-byte sectors.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Shao Miller [Fri, 20 Nov 2009 01:49:34 +0000 (20:49 -0500)]
memdisk: Use boot_lba logic for booting an offset within the disk image
We have two fundamental quantities: the offset of the disk image
itself and the LBA from which we boot. Keep them straight. This
should make at least some no-emulation isos work correctly.
Signed-off-by: Shao Miller <shao.miller@yrdsb.edu.on.ca>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Shao Miller [Fri, 20 Nov 2009 01:20:33 +0000 (20:20 -0500)]
memdisk: Restore DL for INT 13h, AH=15h, DL=floppy
At least PC-DOS requires this to avoid an infinite loop; the DL we
restore is not the same DL that we call the underlying BIOS with, but
rather the original one (before the decrement.) PC-DOS loops over all
the floppies and relies on the call preserving DL in order to advance
the loop.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
H. Peter Anvin [Fri, 20 Nov 2009 01:17:36 +0000 (17:17 -0800)]
open: close the file descriptor if the file fails to open
Close the file descriptor (freeing the file structure) when opening a
file fails.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
H. Peter Anvin [Fri, 20 Nov 2009 00:52:11 +0000 (16:52 -0800)]
dprintf: fix uninitialized pointer; return void
Fix an uninitialized pointer bug; return void rather than returning
int like normal printfs... if we're depending on the return value of a
debugging function we're screwed when debugging is disabled.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
H. Peter Anvin [Thu, 19 Nov 2009 23:33:58 +0000 (15:33 -0800)]
dprintf: fix dprintf() and vdprintf()
Fix incorrect prototype for vdprintf() used in dprintf(), masked by
the non-use of the header file.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
H. Peter Anvin [Thu, 19 Nov 2009 19:10:54 +0000 (11:10 -0800)]
menu: debugging hooks
Add (disabled) debugging hooks to the menu system.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
H. Peter Anvin [Thu, 19 Nov 2009 19:10:00 +0000 (11:10 -0800)]
dprintf: a generic debug-to-serial infrastructure
Actually provide real infrastructure for debug-to-serial. Very
useful when debugging fullscreen applications, especially under an
emulator like Qemu.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Pierre-Alexandre Meyer [Thu, 19 Nov 2009 04:25:29 +0000 (20:25 -0800)]
hdt: fix double lines in the menu
Ralf Carl reports some UI glitches in the summary menu
(unnecessary line separator at the bottom).
This patch rewrites the separator logic.
Signed-off-by: Pierre-Alexandre Meyer <pierre@mouraf.org>
Pierre-Alexandre Meyer [Thu, 19 Nov 2009 04:18:04 +0000 (20:18 -0800)]
hdt: trivial printf fix (CLI)
Remove a typo. This fixes a compilation warning.
Signed-off-by: Pierre-Alexandre Meyer <pierre@mouraf.org>
Pierre-Alexandre Meyer [Thu, 19 Nov 2009 04:15:55 +0000 (20:15 -0800)]
hdt: more memory corruption fixes
A cli_module_descr can be defined with no modules (only a default
callback). Cf. the syslinux module for instance.
This patch adds a check for NULL structures before trying to dereference them.
Signed-off-by: Pierre-Alexandre Meyer <pierre@mouraf.org>
Pierre-Alexandre Meyer [Thu, 19 Nov 2009 03:57:31 +0000 (19:57 -0800)]
hdt: fix memory corruption in CLI
Ralf Carl has reported some corruption in the autocompletion feature
of the CLI. This patch fixes it.
Signed-off-by: Pierre-Alexandre Meyer <pierre@mouraf.org>
Erwan Velu [Wed, 18 Nov 2009 09:52:34 +0000 (10:52 +0100)]
hdt: Using dmi when cpu doesn't support identify
Impact: Avoid free field
On old processors, identify isn't working. In that situation, let's use
the dmi to find the processor model
Erwan Velu [Wed, 18 Nov 2009 09:51:36 +0000 (10:51 +0100)]
hdt: Summary mode use type6 as workaround
Impact: Avoid empty field
The summary mode should also use type6 as fallback of type 17
Erwan Velu [Tue, 17 Nov 2009 16:20:30 +0000 (17:20 +0100)]
hdt: Adding includes to avoid gcc warning
Impact: Avoid warnings at compile time
hdt.c was calling start_cli without including the according .h file
Erwan Velu [Tue, 17 Nov 2009 16:17:17 +0000 (17:17 +0100)]
hdt: Fixing type 6 detection in cli mode
Impact: Type 6 only systems would have been unable to show modules in
cli
This commit is completing
bc6105b409291f0f15bbe99d348e5641a0f7c729
Erwan Velu [Tue, 17 Nov 2009 16:14:34 +0000 (17:14 +0100)]
hdt: Removing dead code, adding comments
Impact: Removing dead code
This code was used in the ancient cli model. That's just dead code.
Let's add a few comments too
Erwan Velu [Tue, 17 Nov 2009 15:19:34 +0000 (16:19 +0100)]
hdt: Summary in cli mode can use type 6
Impact: Show summary displays modules when type 17 isn't available
When dmi type 17 isn't available, the "show summary" command must use
type 6 to show the current memory configuration
H. Peter Anvin [Tue, 17 Nov 2009 05:05:23 +0000 (21:05 -0800)]
Merge branch 'master' into memdisk-iso
H. Peter Anvin [Tue, 17 Nov 2009 02:21:37 +0000 (18:21 -0800)]
isohybrid: make the -offset option actually work
Actually implement the -offset option. Credit for the patch goes to
"cmdr from the gparted-forum", reported by
Sven-Hendrik Haase <sh@lutzhaase.com>.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Erwan Velu [Mon, 16 Nov 2009 16:28:34 +0000 (17:28 +0100)]
hdt: Disabling SERIAL 0 support
Impact: Improves speed
As reported in ticket #24, removing SERIAL output increase performances
Erwan Velu [Mon, 16 Nov 2009 13:12:49 +0000 (14:12 +0100)]
hdt: DMI Type 6 used as a workaround for Type 17
Impact: Allow to have a memory entry when only type 6 is available
Prior to that commit, systems that only featured type 6 weren't able to
display the memory information.
Shao Miller [Mon, 16 Nov 2009 10:36:06 +0000 (10:36 +0000)]
Merge branch 'memdisk-iso-SAFE' into memdisk-iso
Conflicts:
memdisk/memdisk_chs.asm
memdisk/memdisk_edd.asm
memdisk/setup.c
Resolved:
Deleted memdisk/memdisk_chs.asm
Deleted memdisk/memdisk_edd.asm
Modified memdisk/setup.c
Pierre-Alexandre Meyer [Mon, 16 Nov 2009 07:37:12 +0000 (23:37 -0800)]
gpllib: mbr: add detection for Grub2 minor versions
Grub2 v1.96 and v1.97 have different opcodes in their MBR.
Reported-by: gert
This fixes #26.
Signed-off-by: Pierre-Alexandre Meyer <pierre@ning.com>
Pierre-Alexandre Meyer [Mon, 16 Nov 2009 07:31:14 +0000 (23:31 -0800)]
gpllib: mbr: change "Gag" to "GAG"
Reported-by: gert
Signed-off-by: Pierre-Alexandre Meyer <pierre@mouraf.org>
Pierre-Alexandre Meyer [Mon, 16 Nov 2009 07:29:28 +0000 (23:29 -0800)]
gpllib: mbr: change "Plop" to "PloP"
Reported-by: gert
Signed-off-by: Pierre-Alexandre Meyer <pierre@ning.com>
Pierre-Alexandre Meyer [Mon, 16 Nov 2009 07:24:37 +0000 (23:24 -0800)]
gpllib: add XOSL mbr detection
Feature request originally reported at
http://sourceforge.net/projects/bootinfoscript/forums/forum/905692/topic/3459317
and forwarded to HDT by gert.
This fixes #25.
Signed-off-by: Pierre-Alexandre Meyer <pierre@ning.com>
H. Peter Anvin [Sat, 14 Nov 2009 05:03:12 +0000 (21:03 -0800)]
mboot.c32: fix the video mode selection algorithm
Make the video mode selection algorithm do what was intended...
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
H. Peter Anvin [Sat, 14 Nov 2009 04:16:43 +0000 (20:16 -0800)]
mboot.c32: add VESA mode setting support
Add VESA mode setting support per the Multiboot specification.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
H. Peter Anvin [Sat, 14 Nov 2009 03:18:57 +0000 (19:18 -0800)]
Merge branch 'master' of ssh://terminus.zytor.com/pub/git/syslinux/syslinux