gdb/testsuite/
* gdb.threads/attach-stopped.exp (continue (*: attach2 continue))
(*: attach2 stop interrupt, *: attach2, exit leaves process sleeping):
Remove.
* gdb.threads/attachstop-mt.c: Remove.
* gdb.threads/attachstop-mt.exp: Remove.

2011-12-19  Chung-Lin Tang  <cltang@codesourcery.com>

gas/
* config/tc-mips.c (mips_pseudo_table): Add tprelword/tpreldword
entries.
(mips16_percent_op): Add MIPS16 TLS relocation ops.
(md_apply_fix): Add BFD_RELOC_MIPS16_TLS_* switch cases.
(s_tls_rel_directive): Rename from s_dtprel_internal(). Abstract out
directive string and reloc type as function parameters. Update
comments.
(s_dtprelword,s_dtpreldword): Change to use s_tls_rel_directive().
(s_tprelword,s_tpreldword): New functions.

include/
* elf/mips.h (elf_mips_reloc_type): Add R_MIPS16_TLS_* entries.

bfd/
* reloc.c (BFD_RELOC_MIPS16_TLS_GD,BFD_RELOC_MIPS16_TLS_LDM,
BFD_RELOC_MIPS16_TLS_DTPREL_HI16,BFD_RELOC_MIPS16_TLS_DTPREL_LO16,
BFD_RELOC_MIPS16_TLS_GOTTPREL,BFD_RELOC_MIPS16_TLS_TPREL_HI16,
BFD_RELOC_MIPS16_TLS_TPREL_LO16): New relocations for MIPS16 TLS.
* bfd-in2.h (bfd_reloc_code_real): Regenerate.
* libbfd.h (bfd_reloc_code_real_names): Regenerate.
* elf32-mips.c (elf_mips16_howto_table_rel): Add R_MIPS16_TLS_*
entries.
(mips16_reloc_map): Add BFD_RELOC_MIPS16_TLS_* to R_MIPS16_TLS_*
mappings.
* elfn32-mips.c (elf_mips16_howto_table_rel,
elf_mips16_howto_table_rela): Add R_MIPS16_TLS_* entries.
(mips16_reloc_map): Add BFD_RELOC_MIPS16_TLS_* to R_MIPS16_TLS_*
mappings.
* elf64-mips.c (mips16_elf64_howto_table_rel,
mips16_elf64_howto_table_rela): Add R_MIPS16_TLS_* entries.
(mips16_reloc_map): Add BFD_RELOC_MIPS16_TLS_* to R_MIPS16_TLS_*
mappings.
* elfxx-mips.c (TLS_RELOC_P,mips16_reloc_p,
_bfd_mips_elf_check_relocs): Add cases for R_MIPS16_TLS_* relocations.
(tls_gd_reloc_p): Add R_MIPS16_TLS_GD case.
(tls_ldm_reloc_p): Add R_MIPS16_TLS_LDM case.
(tls_gottprel_reloc_p): Add R_MIPS16_TLS_GOTTPREL case.
(mips_elf_calculate_relocation): Add cases for R_MIPS16_TLS_*,
R_MIPS_TLS_DTPREL32/64, and R_MIPS_TLS_TPREL32/64 relocations.

2011-12-19  Chung-Lin Tang  <cltang@codesourcery.com>
    Catherine Moore  <clm@codesourcery.com>
    Sandra Loosemore  <sandra@codesourcery.com>
    Richard Sandiford  <rdsandiford@googlemail.com>

* elfxx-mips.c (mips_elf_local_pic_function_p): Return true when
H is a MIPS16 function with a kept 32-bit stub. Update comments.
(mips_elf_get_la25_target): New function.
(mips_elf_add_la25_intro): Change to use mips_elf_get_la25_target().
(mips_elf_add_la25_stub): Move compute of use_trampoline_p down,
change to use mips_elf_get_la25_target().
(mips_elf_relocation_needs_la25_stub): Add target_is_16_bit_code_p
parameter, add switch case for R_MIPS16_26.
(mips_elf_calculate_relocation): Redirect relocation to point to the
LA25 stub if it exists, instead of the MIPS16 stub. Update arguments
of call to mips_elf_relocation_needs_la25_stub(), don't use la25 stub
for mips16->mips16 calls.
(_bfd_mips_elf_check_relocs): Update arguments of call to
mips_elf_relocation_needs_la25_stub().
(mips_elf_create_la25_stub): Change to use mips_elf_get_la25_target().

try ignoring bad PLT entries in ELF symbol tables

Comment says it all:

         /* On ia64-hpux, we have discovered that the system linker
            adds undefined symbols with nonzero addresses that cannot
            be right (their address points inside the code of another
            function in the .text section).  This creates problems
            when trying to determine which symbol corresponds to
            a given address.

            We try to detect those buggy symbols by checking which
            section we think they correspond to.  Normally, PLT symbols
            are stored inside their own section, and the typical name
            for that section is ".plt".  So, if there is a ".plt"
            section, and yet the section name of our symbol does not
            start with ".plt", we ignore that symbol.  */

gdb/ChangeLog:

        * elfread.c (elf_symtab_read): Ignore undefined symbols with
        nonzero addresses if they do not correspond to a .plt section
        when one is available in the objfile.

Work around Solaris bourne shell limitation when building the sim

Building the sim on a sparc-solaris 2.8 machine fails when configured
with no extra sim hardware:

> for hw in  ; do \
>         echo "extern const struct hw_descriptor
>         dv_${hw}_descriptor[];" ; \
>       done >> tmp-hw.h
> echo 'const char version[] = "'"`sed q
> /[...]/../../gdb/version.in`"'";'
> >> version.c-tmp
> /bin/sh: -c: line 1: syntax error near unexpected token `;'
> /bin/sh: -c: line 1: `for hw in  ; do \'
> make[3]: *** [hw-config.h] Error 2

The same thing happens with the version of bash that we got from
Sun as well (which is very old: 2.03.0(1)-release).

The problems comes from the fact that both shells are buggy, and
reject the following script:

    for hw in ; do
      [...]
    done

The above is what sim/common/Makefile.in tries to execute when
generating hw-config.h.

In order to allow users to build out of the box on these machines,
this patch works around this bug.  It does rely on the fact that
none of the tokens in SIM_HW contain whitespaces.

sim/common/ChangeLog:

        * Make-common.in (hw-config.h): Work around bug in Solaris 2.8
        system bourne shell.

*** empty log message ***

gdb/gdbserver/
* linux-low.c (linux_create_inferior): Put empty if clause for write.

Revert:
2011-12-18  Hui Zhu  <teawater@gmail.com>
* linux-low.c (linux_create_inferior): Save return value to ret.

2011-12-18  Hui Zhu  <teawater@gmail.com>

* linux-low.c (linux_create_inferior): Save return value to ret.

* configure: Regenerate.
config/
* acx.m4 (Test for GNAT): Update comment and add quotes in final test.

*** empty log message ***

2011-12-17  Cary Coutant  <ccoutant@google.com>

* dwarf_reader.cc (Sized_dwarf_line_info::read_lines): Add casts.
* resolve.cc (Symbol_table::resolve): Likewise.
* i386.cc (Target_i386::do_code_fill): Use char constants for nop
arrays.
* x86_64.cc (Target_x86_64::do_code_fill): Likewise.

* cp-name-parser.y (cp_merge_demangle_parse_infos): Don't use
obstack_empty_p.

* amd64obsd-tdep.c (amd64obsd_init_abi): Don't set
regset_from_core_section.
(amd64obsd_core_init_abi): New function that sets
regset_from_core_section.
(_initialize_amd64obsd_tdep): Use amd64obsd_core_init_abi for
traditional core dumps.

* gdb.arch/amd64-i386-address.exp: Skip on *-*-openbsd*.

* amd64obsd-tdep.c (amd64obsd_sigtramp_p): Detect new signal
trampoline to be introduced in OpenBSD 5.0.

gdb/
Fix build regression from the PR threads/10729 fix.
* s390-nat.c (s390_insert_watchpoint, s390_remove_watchpoint): Use LP,
not LP->PTID.

* mi/mi-main.c (mi_cmd_list_thread_groups): Rename `optind' and
`optarg' to `oind' and `oarg', respectively(-Wshadow).
(mi_cmd_data_read_memory): Ditto.
(mi_cmd_data_read_memory_bytes): Ditto.

* mi/mi-getopt.c (mi_getopt): Rename `optind' and `optarg' to
`oind' and `oarg', respectively(-Wshadow).
(mi_valid_noargs): Ditto.

* mi/mi-cmd-var.c (print_varobj): Rename `optind' and `optarg' to
`oind' and `oarg', respectively(-Wshadow).

* mi/mi-cmd-target.c (mi_cmd_target_file_get): Rename `optind' and
`optarg' to `oind' and `oarg', respectively(-Wshadow).
(mi_cmd_target_file_put): Ditto.
(mi_cmd_target_file_delete): Ditto.

* mi/mi-cmd-env.c (mi_cmd_env_path): Rename `optind' and
`optarg' to `oind' and `oarg', respectively(-Wshadow).
(mi_cmd_env_dir): Ditto.

* mi/mi-cmd-disas.c (mi_cmd_disassemble):  Rename `optind' and `optarg'
to `oind' and `oarg', respectively(-Wshadow).

* mi/mi-cmd-break.c (mi_cmd_break_insert): Rename `optind' and
`optparg' to `oind' and `oparg', respectively(-Wshadow).
(mi_cmd_break_watch): Ditto.

*** empty log message ***

* output.h (Output_data_reloc_generic::add): Only call
add_dynamic_reloc if this is a dynamic reloc section.

daily update

* linespec.c (collect_symbols): Call maybe_add_address after
calling symbol_to_sal.
(minsym_found): Call maybe_add_address here.
(search_minsyms_for_name): Don't call maybe_add_address.

* linespec.c (struct collect_info) <objfile>: Remove field.
(decode_objc): Update.
(find_method): Update.
(decode_variable): Update.
(struct minsym_and_objfile): New.
(struct collect_minsyms): New.
(classify_mtype): New function.
(compare_msyms): Likewise.
(add_minsym): Likewise.
(check_minsym): Remove.
(search_minsyms_for_name): Sort minsyms and apply only those with
top priority.

* cli/cli-cmds.c (filter_sals): Filter out sals with NULL symtab.

2011-12-16  Pedro Alves  <pedro@codesourcery.com>

* inf-loop.c: Include top.h.
(inferior_event_handler): Call check_frame_language.
* top.c (check_frame_language_change): New, factored out from ...
(execute_command): ... this.  Use check_frame_language_change.
* top.h (check_frame_language_change): Declare.

fix typo in previous entry

* boards/native-stdiogdbserver.exp: New file.

* windows-nat.c (cygwin_get_dr, cygwin_get_dr7): Add missing
prototypes.

* boards/native-gdbserver.exp: New file.

* linux-low.c (linux_create_inferior): If stdio connection,
redirect stdin from /dev/null, stdout to stderr.
* remote-utils.c (remote_is_stdio): New static global.
(remote_connection_is_stdio): New function.
(remote_prepare): Handle stdio connection.
(remote_open): Ditto.
(remote_close): Don't close stdin for stdio connections.
(read_prim,write_prim): New functions.  Replace all calls to
read/write to these.
* server.c (main): Watch for "-" argument.  Move call to
remote_prepare before start_inferior.
* server.h (STDIO_CONNECTION_NAME): New macro.
(remote_connection_is_stdio): Declare.

* NEWS: Add entry for stdio gdbserver.

gdbserver/
* linux-low.c (linux_create_inferior): If stdio connection,
redirect stdin from /dev/null, stdout to stderr.
* remote-utils.c (remote_is_stdio): New static global.
(remote_connection_is_stdio): New function.
(remote_prepare): Handle stdio connection.
(remote_open): Ditto.
(remote_close): Don't close stdin for stdio connections.
(read_prim,write_prim): New functions.  Replace all calls to
read/write to these.
* server.c (main): Watch for "-" argument.  Move call to
remote_prepare before start_inferior.
* server.h (STDIO_CONNECTION_NAME): New macro.
(remote_connection_is_stdio): Declare.

doc/
* gdb.texinfo (Server): Document -/stdio argument to gdbserver.

testsuite/
* lib/gdbserver-support.exp (gdb_target_cmd): Recognize stdio
gdbserver output.
(gdbserver_default_get_remote_address): New function.
(gdbserver_start): Call gdb,get_remote_address to compute argument
to "target remote" command.

* remote-utils.c (prepare_resume_reply): Remove extraneous \n
in debugging output.

2011-12-16  Phil Muldoon  <pmuldoon@redhat.com>

        * ChangeLog: Fix path typo.
* doc/ChangeLog: Ditto.

2011-12-16  Phil Muldoon  <pmuldoon@redhat.com>

* testsuite/gdb.python/py-function.exp: Change "on" to "full" for
python print-stack.  Add set/show python print-stack
off|full|message tests.

2011-12-16  Phil Muldoon  <pmuldoon@redhat.com>

* python/python.c: Define python_excp_enums.
(eval_python_from_control_command): Do not call gdbpy_print_stack.
(python_command): Ditto.
(gdbpy_print_stack): Rewrite to use new enum constants.
(maint_set_python): Remove function.
(maint_show_python): Ditto.
(_initialize_python): Do not add "maint" commands.  Add "set/show
python print-stack commands".
* NEWS: Update to reflect removal for "maint set/show
print-stack"

2011-12-16  Phil Muldoon  <pmuldoon@redhat.com>

* doc/gdb.texinfo (Python Commands): Remove "maint set/show print
stack".  Add documentation for "set/show python print-stack".

2011-12-16  Shinichiro Hamaji  <shinichiro.hamaji@gmail.com>

* mach-o-i386.c (TARGET_PRIORITY): Define as 0 (top priority)
* mach-o-target.c (TARGET_NAME): Use TARGET_PRIORITY
* mach-o-x86-64.c (TARGET_PRIORITY): Define as 0 (top priority)
* mach-o.c (bfd_mach_o_header_p): Remove special handling for
mach-o-i386.
(TARGET_PRIORITY) Set 1 for mach-o-be and mach-o-le, and set 0 for
mach-o-fat.

binutils/
2011-12-16  Tristan Gingold  <gingold@adacore.com>

* od-macho.c: Include mach-o/codesign.h
(OPT_CODESIGN): Define.
(options): Add an entry for codesign.
(mach_o_help): Likewise.
(dump_header): Fix indentation.
(dump_thread): Do not test result of xmalloc.
(bfd_mach_o_cs_magic, bfd_mach_o_cs_hash_type): New.
(dump_code_signature_superblob): New function.
(swap_code_codedirectory_v1_in): Likewise.
(hexdump): Likewise.
(dump_code_signature_codedirectory): Likewise.
(dump_code_signature_blob, dump_code_signature): Likewise.
(dump_load_command): Dump code signature.
(mach_o_dump): Likewise.

include/mach-o/
2011-12-16  Tristan Gingold  <gingold@adacore.com>

* codesign.h: New file.

2011-12-15  David Daney  <david.daney@cavium.com>
    Nick Clifton <nickc@redhat.com>

* ld-elfvers/vers.exp (picflag): Set to -fpic for mips*-*-* when
using GCC-4.3 or later.
(pic): Set to "yes" for mips*-*-linux*.
* ld-elfvsb/elfvsb.exp: Don't test non-PIC shared libraried on
mips*-*-linux*.
(picflag): Set to -fpic for mips*-*-* when using GCC-4.3 or later.
* ld-elfweak/elfweak.exp (picflag): Set to -fpic for mips*-*-*
when using GCC-4.3 or later.
* ld-shared/shared.exp (picflag): Same.
* lib/ld-lib.exp (at_least_gcc_version): New proc.

* elf32-am33lin.c (elf32_am33lin_grok_prstatus): Add case
to correspond to a smaller ELF_NGREG defined by the kernel.

*** empty log message ***

Replace <64, false> with <size, big_endian>

2011-12-15  H.J. Lu  <hongjiu.lu@intel.com>

PR gold/13505
* target-reloc.h (apply_relocation): Replace <64, false> with
<size, big_endian>.

daily update

2011-12-15  Jeff Johnston  <jjohnstn@redhat.com>

        * COPYING.LIBGLOSS: Add GPL with exception license.

* exceptions.c (catcher_list_size): New function.
(last_message): Delete.
(exception_messages, exception_messages_size): New static globals.
(throw_it): Use exception_messages array to handle nested calls.

Set the default x32 interpreter to "/lib/ldx32.so.1"

2011-12-15  H.J. Lu  <hongjiu.lu@intel.com>

* elf64-x86-64.c (ELF32_DYNAMIC_INTERPRETER): Set to
 "/lib/ldx32.so.1".

* symfile.c (symbol_file_add_with_addrs_or_offsets): Remove bad
do_cleanups call.

2011-12-15  Iain Sandoe  <iains@gcc.gnu.org>

* mach-o.c (bfd_mach_o_mkobject_init): Initialize dyn_reloc_cache.
(bfd_mach_o_close_and_cleanup): Only cleanup Mach-O private data
for object files.

gdb/testsuite/
* gdb.trace/strace.c: New
* gdb.trace/strace.exp: New.

gdb/gdbserver/
* tracepoint.c: Include sys/syscall.h.
(gdb_ust_thread): Remove preprocessor conditional.

2011-12-15  Tristan Gingold  <gingold@adacore.com>

* config/obj-macho.c (obj_mach_o_fileprop): Fix typo.

* readelf.c (get_symbol_type): Add ELFOSABI_FREEBSD to the
supported abi's.

* config/obj-elf.c (obj_elf_type): Add ELFOSABI_FREEBSD to the
supported abi's.

2011-12-15  Shinichiro Hamaji  <shinichiro.hamaji@gmail.com>

* mach-o.c (bfd_mach_o_canonicalize_reloc): Update relocation
table only when there isn't the cahce.
(bfd_mach_o_get_dynamic_reloc_upper_bound): Need one more space
for a pointer for the watchdog.
(bfd_mach_o_canonicalize_dynamic_reloc): Utilize cache like
bfd_mach_o_canonicalize_reloc.
(bfd_mach_o_close_and_cleanup): Call bfd_mach_o_free_cached_info.
(bfd_mach_o_free_cached_info): Free up cache data.
* mach-o.h (reloc_cache): A place to store cache of dynamic relocs.
(bfd_mach_o_free_cached_info): Add declaration.

bfd/
2011-12-15  Iain Sandoe  <iains@gcc.gnu.org>

* mach-o-target.c (bfd_mach_o_bfd_set_private_flags): Use
bfd_mach_o_bfd_set_private_flags.
* mach-o.c (bfd_mach_o_bfd_set_private_flags): New.
* mach-o.h (bfd_mach_o_bfd_set_private_flags): Declare.

gas/
2011-12-15  Iain Sandoe  <iains@gcc.gnu.org>

* config/obj-macho.c (obj_mach_o_subsections_by_symbols): New global.
(obj_mach_o_file_properties): New enum.
(obj_mach_o_subsections_via_symbols):  Generalize name to...
... (obj_mach_o_fileprop) and use to set subsections_via_symbols.

gas/testsuite/
2011-12-15  Iain Sandoe  <iains@gcc.gnu.org>

* gas/mach-o/subsect-via-symbols-0.d: New.
* gas/mach-o/subsect-via-symbols-1.d: New.
* gas/mach-o/subsect-via-symbols.s: New.

* frv.opc (parse_uhi16): Fix handling of %hi operator on 64-bit
hosts.

* cgen-asm.c (cgen_parse_signed_integer): Add code to handle the
sign extension of negative values on a 64-bit host.
* frv-asm.c: Regenerate.

* gas/frv/immediates.s: New test file - checks assembly of
constant values.
* gas/frv/immediates.d: Expected disassmbly.
* gas/frv/allinsn.exp: Run the new test.

gas/
2011-12-14  Stuart Henderson  <shenders@gcc.gnu.org>

* config/bfin-parse.y (asm_1): set SRCx fields to all 1s for
dspalu32 instrs that don't use them.

gas/testsuite/
2011-12-14  Stuart Henderson  <shenders@gcc.gnu.org>

* gas/bfin/move.d: Update SRCx field expectations.
* gas/bfin/move2.d: Likewise.
* gas/bfin/parallel.d: Likewise.
* gas/bfin/parallel2.d: Likewise.
* gas/bfin/parallel3.d: Likewise.
* gas/bfin/parallel4.d: Likewise.
* gas/bfin/video.d: Likewise.
* gas/bfin/video2.d: Likewise.

*** empty log message ***

daily update

* defs.h (wait_to_die_with_timeout): Declare.
* utils.c: #include "gdb_wait.h".
(sigalrm_handler, wait_to_die_with_timeout): New functions.
* ser-pipe.c: Don't #include "gdb_wait.h".
(pipe_close): Give child a chance to die on its own after closing
its stdin before SIGTERM'ing it.

Fix latest ChangeLog entry (forgot to give credit to reporter)

fix uninitialized field in ada-lang.c (struct match_data)

Field found_sym in add_nonlocal_symbols's struct match_data is
used uninitialized.  Rather than adding the initialization of
this field (to zero), we set the entire structure to zero first,
and then set the fields that need to be initialized to non-zero
next.

gdb/ChangeLog:

        * ada-lang.c (add_nonlocal_symbols): Initialize data to
        all zeros.  Remove setting of data.arg_sym to NULL.

* gdb.dwarf2/dw2-inline-param.exp: Log the objcopy command.

* lib/gdb.exp (gdb_start_cmd): Fix error return value.

Fix typo in "Changes since ...".

2011-12-14  Pedro Alves  <pedro@codesourcery.com>

* linux-low.c (linux_detach_one_lwp): Call
the_low_target.prepare_to_resume before detaching.

gdb/
2011-12-14  Pedro Alves  <pedro@codesourcery.com>

PR threads/10729

* linux-nat.c (linux_nat_new_thread): Change parameter to an lwp
pointer.
(linux_nat_prepare_to_resume): New global.
(lwp_free): New.
(purge_lwp_list): Use it.
(add_lwp): Call linux_nat_new_thread even on the first LWP.
Adjust to interface change.
(delete_lwp): Call lwp_free instead of xfree.
(detach_callback, linux_nat_detach, resume_lwp, linux_nat_resume)
(linux_handle_syscall_trap, linux_handle_extended_wait)
(linux_nat_filter_event, resume_stopped_resumed_lwps): Call
linux_nat_prepare_to_resume before resuming.
(linux_stop_lwp): New.
(linux_nat_set_new_thread): Adjust.
(linux_nat_set_prepare_to_resume): New.
* linux-nat.h (struct arch_lwp_info): Forward declare.
(struct lwp_info) <arch_private>: New field.
(linux_stop_lwp): Declare.
(linux_nat_set_new_thread): Adjust.
(linux_nat_set_prepare_to_resume): New.

* i386-nat.c (DR_NADDR, DR_STATUS, DR_CONTROL)
(struct i386_debug_reg_state): Move to i386-nat.h.
(dr_mirror): Comment.
(i386_debug_reg_state): New.
(i386_update_inferior_debug_regs): Simplify.
(i386_stopped_data_address): Use the debug register state from the
inferior, not from the local cache.
* i386-nat.h (struct i386_dr_low_type): Delete reset_addr and
unset_status fields.  New get_addr and get_control fields.
(DR_FIRSTADDR, DR_LASTADDR, DR_CONTROL): Moved from i386-nat.c.
(DR_NADDR, DR_STATUS): New.
(struct i386_debug_reg_state): Moved from i386-nat.c.

* amd64-linux-nat.c (struct arch_lwp_info): New.
(amd64_linux_dr): Delete global.
(amd64_linux_dr_get_addr): New.
(amd64_linux_dr_get_control): New.
(amd64_linux_dr_unset_status): Delete.
(amd64_linux_dr_set_addr): Reimplement.
(amd64_linux_dr_reset_addr): Delete.
(update_debug_registers_callback): New.
(amd64_linux_dr_set_control): Reimplement.
(amd64_linux_dr_set_addr): Reimplement.
(amd64_linux_prepare_to_resume): New.
(amd64_linux_new_thread): Change parameter to an lwp pointer.
Reimplement.
(_initialize_amd64_linux_nat): No longer install
i386_dr_low.reset_addr and i386_dr_low.unset_status.  Install
amd64_linux_dr_get_control as i386_dr_low.get_control.  Install
amd64_linux_dr_get_addr as i386_dr_low.get_addr.  Install
amd64_linux_prepare_to_resume.
* i386-linux-nat.c (DR_FIRSTADDR, DR_LASTADDR, DR_STATUS)
(DR_CONTROL): Delete.
(struct arch_lwp_info): New.
(i386_linux_dr): Delete global.
(i386_linux_dr_set_control): Reimplement.
(i386_linux_dr_get_addr): New.
(i386_linux_dr_set_addr): Reimplement.
(i386_linux_dr_get_control): New.
(update_debug_registers_callback): New.
(i386_linux_dr_unset_status): Delete.
(i386_linux_dr_set_addr): Reimplement.
(i386_linux_prepare_to_resume): New.
(i386_linux_new_thread): Change parameter to an lwp pointer.
Reimplement.
(_initialize_i386_linux_nat): No longer install
i386_dr_low.reset_addr and i386_dr_low.unset_status.  Install
i386_linux_dr_get_control as i386_dr_low.get_control.  Install
i386_linux_dr_get_addr as i386_dr_low.get_addr.  Install
i386_linux_prepare_to_resume.

* arm-linux-nat.c (arm_linux_new_thread): Change parameter to an
lwp pointer.  Adjust.
* ia64-linux-nat.c (ia64_linux_new_thread): Likewise.
* mips-linux-nat.c (mips_linux_new_thread): Likewise.
* ppc-linux-nat.c (ppc_linux_new_thread): Likewise.
* s390-nat.c (s390_fix_watch_points): Likewise.

* i386-darwin-nat.c (DR_FIRSTADDR, DR_LASTADDR, DR_STATUS)
(DR_CONTROL): Delete.
(i386_darwin_dr_reset_addr): Delete.
(i386_darwin_dr_get_addr): New.
(i386_darwin_dr_get_control): New.
* go32-nat.c
(go32_get_dr7, go32_get_dr): New.
(init_go32_ops): No longer install i386_dr_low.reset_addr.
Install go32_get_dr7 as i386_dr_low.get_control.  Install
go32_get_dr as i386_dr_low.get_addr.
* i386bsd-nat.c (i386bsd_dr_get): New.
(i386bsd_dr_reset_addr): Delete.
(i386bsd_dr_get_addr): New.
(i386bsd_dr_get_status): Use i386bsd_dr_get.
(i386bsd_dr_get_control): New.
* i386bsd-nat.h (i386bsd_dr_reset_addr): Delete.
(i386bsd_dr_get_addr): New.
(i386bsd_dr_get_control): New.
* i386fbsd-nat.c (_initialize_i386fbsd_nat): No longer install
i386_dr_low.reset_addr and i386_dr_low.unset_status.  Install
i386bsd_dr_get_control as i386_dr_low.get_control.  Install
i386bsd_dr_get_addr as i386_dr_low.get_addr.
* windows-nat.c (init_windows_ops): No longer install
i386_dr_low.reset_addr and i386_dr_low.unset_status.  Install
cygwin_get_dr7 as i386_dr_low.get_control.  Install cygwin_get_dr
as i386_dr_low.get_addr.
(cygwin_get_dr): New.
(cygwin_get_dr7): New.

gdb/testsuite/
2011-12-14  Pedro Alves  <pedro@codesourcery.com>

PR threads/10729

* gdb.mi/watch-nonstop.c: New file.
  * gdb.mi/mi-watch-nonstop.exp: New file.

When computing checksums, skip the contents of sections with the SHT_NOBITS type.
Revert change to compress.c

Add PR gdb/8367 to basenames-may-differ patch.

2011-12-14  Iain Sandoe  <iains@gcc.gnu.org>

* gas/mach-o/comm-1.d: New.
* gas/mach-o/comm-1.s: New.
* gas/mach-o/lcomm-1.s: New.
* gas/mach-o/mach-o.exp: Update to use run_dump_tests[].
* gas/mach-o/sections-1.d: New.
* gas/mach-o/sections-1.s: New.
* gas/mach-o/warn-1.s: Add .comm alignment range warning.

Add PR # 7200 to: Make "!" an alias for "shell".

2011-12-14  Pedro Alves  <pedro@codesourcery.com>

* ia64-tdep.c (ia64_memory_remove_breakpoint): Use
target_write_raw_memory.
* m32r-tdep.c (m32r_memory_remove_breakpoint): Use
target_write_raw_memory.
* microblaze-linux-tdep.c
(microblaze_linux_memory_remove_breakpoint): Use
target_write_raw_memory.
* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Use
target_write_raw_memory.

2011-12-14  Pedro Alves  <pedro@codesourcery.com>

* gdb.texinfo (Implementing a Remote Stub): Explain that you
should transfer control to the stub in the startup code instead of
in main.  Mention the need to get past the initial breakpoint.

Make decode_line_internal static.

gdb/ChangeLog:

* linespec.c (decode_line_internal): Make static.

* config/tc-cris.c (md_convert_frag): Mark the length_code local
variable as unused as it is only used when ENABLE_CHECKING is on.

2011-12-14  Iain Sandoe  <iains@gcc.gnu.org>

* gas/mach-o: New.
* gas/mach-o/mach-o.exp: New.
* gas/mach-o/warn-1.s: New.
* gas/mach-o/lcomm-1.s: New.
* gas/mach-o/lcomm-1.d: New.

PR ld/12451
* elfcode.h (elf_checksum_contents): Read in the section's
contents if they are not already available.
* compress.c (bfd_get_full_section_contents): Use zmalloc to
allocate the buffers so that excess bytes are guaranteed to be
zero.

bfd/
2011-12-14  Iain Sandoe  <iains@gcc.gnu.org>

* mach-o-i386.c (text_section_names_xlat): New table.
(data_section_names_xlat): Likewise.
(import_section_names_xlat): Likewise.
(mach_o_i386_segsec_names_xlat): Likewise.
(bfd_mach_o_tgt_seg_table): Use new tables.
* mach-o-x86-64.c (bfd_mach_o_tgt_seg_table): Set NULL.
* mach-o.c (mach_o_section_name_xlat, mach_o_segment_name_xlat):
Move to mach-o.h as   typedefs.
(text_section_names_xlat): Update for current GCC usage.
(data_section_names_xlat): Likewise.
(dwarf_section_names_xlat): Likewise.
(objc_section_names_xlat): New table.
(segsec_names_xlat): Add objc table.
(bfd_mach_o_normalize_section_name):  Replace with...
(bfd_mach_o_section_data_for_mach_sect): New.
(bfd_mach_o_section_data_for_bfd_name): New.
(bfd_mach_o_section_data_for_bfd_name): Update to use additional data.
(bfd_mach_o_convert_section_name_to_mach_o): Likewise.
(bfd_mach_o_bfd_copy_private_section_data): Implement.
(bfd_mach_o_write_symtab): Write a zero-length string as the first entry
for compatibility with system tools.
(bfd_mach_o_build_commands): Update section alignment info.
(bfd_mach_o_new_section_hook): Use translation table data to define
default section flags, type, attributes and alignment, when available.
(bfd_mach_o_init_section_from_mach_o): Add TODO comment.
(bfd_mach_o_section_type_name): Add 'symbol_stubs'.
(bfd_mach_o_section_attribute_name): Add 'self_modifying_code'.
(bfd_mach_o_get_section_type_from_name): Change "not-found" return
value.
(bfd_mach_o_tgt_seg_table): Set default NULL.
* mach-o.h (bfd_mach_o_segment_command):  Use define for name length.
(bfd_mach_o_backend_data): Move until after contents are defined.
(bfd_mach_o_normalize_section_name): Remove.
(bfd_mach_o_convert_section_name_to_bfd): Declare.
(mach_o_section_name_xlat): Declare.
(mach_o_segment_name_xlat): Declare.
(bfd_mach_o_section_data_for_mach_sect): Declare.
(bfd_mach_o_section_data_for_bfd_name): Declare.

include/
2011-12-14  Iain Sandoe  <iains@gcc.gnu.org>

* mach-o/loader.h (bfd_mach_o_section_type): define
BFD_MACH_O_S_ATTR_NONE to 0.

gas/
2011-12-14  Iain Sandoe  <iains@gcc.gnu.org>

* config/obj-macho.c: Add some more top-level comments.
(collect_16char_name): New.
(obj_mach_o_section): Amend to allow syntax compatible with existing system
tools.  Use section translation data when available.
(obj_mach_o_segT_from_bfd_name): New.
(known_sections): Update.
(obj_mach_o_known_section): Use obj_mach_o_segT_from_bfd_name.
(objc_sections): New.
(obj_mach_o_objc_section): New.
(debug_sections): New.
(obj_mach_o_debug_section): New.
(tgt_sections): New.
(obj_mach_o_opt_tgt_section): New.
(obj_mach_o_base_section): New.
(obj_mach_o_common_parse): Update to create BSS on demand and to handle
lcomm optional alignment param.
(obj_mach_o_comm): Update parameter name.
(obj_mach_o_placeholder): New.
(mach_o_pseudo_table): Update for GCC section directives.
* config/obj-macho.h (_OBJ_MACH_O_H): New.
(USE_ALIGN_PTWO): Define.
(S_SET_ALIGN) Define.

gdb/
* breakpoint.c (create_breakpoint): Set canonical.addr_string
for static tracepoint.

gdb/gdbserver/

* tracepoint.c (gdb_ust_thread): Don't ignore return value
of write.

2011-12-14  Yao Qi  <yao@codesourcery.com>

* i386-low.c (i386_low_stopped_data_address): Initialize local
variable `control'.

*** empty log message ***

daily update

gdb/doc/
2011-12-13  Pedro Alves  <pedro@codesourcery.com>

* gdb.texinfo (Implementing a Remote Stub): Explain that you
should transfer control to the stub in the startup code instead of
in main.  Mention the need to get past the initial breakpoint.

gdb/testsuite/
2011-12-13  Pedro Alves  <pedro@codesourcery.com>
    Doug Evans  <dje@google.com>

* lib/gdb.exp (gdb_run_cmd, runto_main, gdb_compile)
(clean_restart): Remove references to the gdb_stub target board
variable.
(gdb_step_for_stub): Delete.

* gdb.base/annota1.exp: Remove all references to [target_info
exists gdb_stub], gdb_step_for_stub and usestubs.
* gdb.base/annota3.exp: Ditto.
* gdb.base/async.exp: Ditto.
* gdb.base/break.exp: Ditto.
* gdb.base/code-expr.exp: Ditto.
* gdb.base/commands.exp: Ditto.
* gdb.base/completion.exp: Ditto.
* gdb.base/condbreak.exp: Ditto.
* gdb.base/consecutive.exp: Ditto.
* gdb.base/cvexpr.exp: Ditto.
* gdb.base/define.exp: Ditto.
* gdb.base/display.exp: Ditto.
* gdb.base/ena-dis-br.exp: Ditto.
* gdb.base/environ.exp: Ditto.
* gdb.base/gnu-ifunc.exp: Ditto.
* gdb.base/maint.exp: Ditto.
* gdb.base/pending.exp: Ditto.
* gdb.base/sect-cmd.exp: Ditto.
* gdb.base/sepdebug.exp: Ditto.
* gdb.base/unload.exp: Ditto.
* gdb.base/watchpoint-solib.exp: Ditto.
* gdb.cp/annota2.exp: Ditto.
* gdb.cp/annota3.exp: Ditto.
* gdb.dwarf2/dw2-inline-param.exp: Ditto.
* gdb.hp/gdb.compat/xdb1.exp: Ditto.
* gdb.mi/mi-pending.exp: Ditto.
* gdb.trace/circ.exp: Ditto.
* gdb.cp/ovldbreak.exp: Ditto.  Adjust expected line numbers.
* gdb.base/list.exp: Ditto.

* gdb.base/all-types.c: Remove all calls to set_debug_traps and
breakpoint function and all references to the usestubs macro.
* gdb.base/exprs.c: Ditto.
* gdb.base/freebpcmd.c: Ditto.
* gdb.base/bitfields.c: Ditto.
* gdb.base/bitfields2.c: Ditto.
* gdb.base/break.c: Ditto.
* gdb.base/call-sc.c: Ditto.
* gdb.base/call-signals.c: Ditto.
* gdb.base/callfuncs.c: Ditto.
* gdb.base/charset.c: Ditto.
* gdb.base/consecutive.c: Ditto.
* gdb.base/constvars.c: Ditto.
* gdb.base/funcargs.c: Ditto.
* gdb.base/int-type.c: Ditto.
* gdb.base/interrupt.c: Ditto.
* gdb.base/langs0.c: Ditto.
* gdb.base/list0.c: Ditto.
* gdb.base/mips_pro.c: Ditto.
* gdb.base/miscexprs.c: Ditto.
* gdb.base/nodebug.c: Ditto.
* gdb.base/opaque0.c: Ditto.
* gdb.base/pointers.c: Ditto.
* gdb.base/printcmds.c: Ditto.
* gdb.base/ptype.c: Ditto.
* gdb.base/recurse.c: Ditto.
* gdb.base/reread1.c: Ditto.
* gdb.base/reread2.c: Ditto.
* gdb.base/restore.c: Ditto.
* gdb.base/return.c: Ditto.
* gdb.base/run.c: Ditto.
* gdb.base/scope0.c: Ditto.
* gdb.base/sepdebug.c: Ditto.
* gdb.base/setshow.c: Ditto.
* gdb.base/setvar.c: Ditto.
* gdb.base/sigall.c: Ditto.
* gdb.base/signals.c: Ditto.
* gdb.base/structs.c: Ditto.
* gdb.base/structs2.c: Ditto.
* gdb.base/testenv.c: Ditto.
* gdb.base/twice.c: Ditto.
* gdb.base/unwindonsignal.c: Ditto.
* gdb.base/watchpoint.c: Ditto.
* gdb.base/watchpoints.c: Ditto.
* gdb.base/whatis.c: Ditto.
* gdb.cp/classes.cc: Ditto.
* gdb.cp/cplusfuncs.cc: Ditto.
* gdb.cp/derivation.cc: Ditto.
* gdb.cp/formatted-ref.cc: Ditto.
* gdb.cp/misc.cc: Ditto.
* gdb.cp/overload.cc: Ditto.
* gdb.cp/ovldbreak.cc: Ditto.
* gdb.cp/ref-params.cc: Ditto.
* gdb.cp/ref-types.cc: Ditto.
* gdb.cp/templates.cc: Ditto.
* gdb.cp/virtfunc.cc: Ditto.
* gdb.hp/gdb.aCC/run.c: Ditto.
* gdb.hp/gdb.base-hp/callfwmall.c: Ditto.
* gdb.hp/gdb.compat/xdb0.c: Ditto.
* gdb.reverse/consecutive-reverse.c: Ditto.
* gdb.reverse/sigall-reverse.c: Ditto.
* gdb.reverse/until-reverse.c: Ditto.
* gdb.reverse/watch-reverse.c: Ditto.
* gdb.trace/actions.c: Ditto.
* gdb.trace/circ.c: Ditto.
* gdb.trace/collection.c: Ditto.

2011-12-13  Pedro Alves  <pedro@codesourcery.com>

PR remote/13492

* i386-low.c (i386_low_stopped_data_address): Avoid fetching
DR_CONTROL unless necessary.  Extend comments.
* linux-x86-low.c (x86_linux_prepare_to_resume): Don't write to
DR0-3 if not used.  If any watchpoint was set, clear DR_STATUS.

2011-12-13  Pedro Alves  <pedro@codesourcery.com>

* gdb.base/watchpoint.c (struct foo2, foo2, struct foo4, foo4)
(func6, func7): New.
(main): Call func6 and func7.
* gdb.base/watchpoint.exp (test_wide_location_1)
(test_wide_location_2): New.
(top level): Re-enable hardware watchpoints if necessary.  Call
test_wide_location_1 and test_wide_location_2.

2011-12-13  Shinichiro Hamaji  <shinichiro.hamaji@gmail.com>

* dwarf2.c (bfd_dwarf2_cleanup_debug_info): Accept stash as an
argument like other functions to support formats other than ELF.
* elf-bfd.h (bfd_dwarf2_cleanup_debug_info): Move to bfd-in.h.
* elf.c (_bfd_elf_close_and_cleanup): Pass dwarf2_find_line_info
in tdata as a parameter.
* libbfd-in.h (bfd_dwarf2_cleanup_debug_info): Move from
elf-bfd.h.
* libbfd.h (bfd_dwarf2_cleanup_debug_info): Regenerate.
* mach-o-target.c (bfd_mach_o_close_and_cleanup): Remove the
fallback macro.
(bfd_mach_o_find_nearest_line): Likewise.
* mach-o.c (bfd_mach_o_find_nearest_line): Add the definition
which calls _bfd_dwarf2_find_nearest_line.
(bfd_mach_o_close_and_cleanup): Likewise.
* mach-o.h (mach_o_data_struct): Add dwarf2_find_line_info.
(bfd_mach_o_find_nearest_line): Add declaration.
(bfd_mach_o_close_and_cleanup): Add declaration.

Create new section in NEWS for next release branch

gdb/ChangeLog:

        * NEWS: Create a new section for the next release branch.
        Rename the section of the current branch, now that it has
        been cut.

* po/it.po: New Italian translation.
* configure.in (ALL_LINGUAS): Add it.
* configure: Regenerate.

Record GDB 7.4 branch creation. Bump version number to 7.4.50.20111213-cvs.

* doc/internals.texi (TC_FORCE_RELOCATION_SUB_SAME): Update
    to match code.

Missing file from my previous commit.

bfd/
2011-12-13  Tristan Gingold  <gingold@adacore.com>

* mach-o.c (bfd_mach_o_read_symtab_symbols): Make global.  Remove
prototype.
(bfd_mach_o_section_get_entry_size): Make global.
(bfd_mach_o_section_get_nbr_indirect): Likewise.
(bfd_mach_o_read_symtab_strtab): Likewise.
(struct bfd_mach_o_xlat_name): Move to mach-o.h
(bfd_mach_o_print_flags): Move to binutils/od-macho.c
(bfd_mach_o_get_name_of_null, bfd_mach_o_get_name): Likewise.
(bfd_mach_o_cpu_name, bfd_mach_o_filetype_name): Likewise.
(bfd_mach_o_header_flags_name): Likewise.
(bfd_mach_o_load_command_name): Likewise.
(bfd_mach_o_print_private_header): Likewise.
(bfd_mach_o_print_section_map, bfd_mach_o_print_section): Likwise.
(bfd_mach_o_print_segment, bfd_mach_o_print_dysymtab): Likewise.
(bfd_mach_o_print_dyld_info): Likewise.
(bfd_mach_o_print_private_bfd_data): Remove.
(bfd_mach_o_type_name): Make global.
(bfd_mach_o_section_attribute_name): Likewise.
* mach-o.h (bfd_mach_o_xlat_name): Added.
(bfd_mach_o_section_get_nbr_indirect)
(bfd_mach_o_section_get_entry_size)
(bfd_mach_o_read_symtab_symbols)
(bfd_mach_o_read_symtab_strtab)
(bfd_mach_o_section_attribute_name)
(bfd_mach_o_section_type_name): Likewise.
* mach-o-target.c (bfd_mach_o_bfd_print_private_bfd_data): Define.

binutils/
2011-12-13  Tristan Gingold  <gingold@adacore.com>

* od-macho.c: New file.
* objdump.h (objdump_private_desc_mach_o): Add.
* configure.in: Add Mach-O od_vectors.
* Makefile.am (CFILES): Add od-macho.c
* configure: Regenerate.
* Makefile.in: Regenerate.

* ppc-opc.c (ISA_V2): Define and use for relevant BO field tests.
(valid_bo_pre_v2, valid_bo_post_v2): New functions, extracted from..
(valid_bo): ..here.  When disassembling, accept either 'y' or 'at'
type encoding on second pass.
(powerpc_opcodes): Use ISA_V2 to enable branch insns rather than
POWER4.
* ppc-dis.c (print_insn_powerpc): Delete dialect_orig.  Instead
ignore deprecated on second pass.

2011-12-13  Chung-Lin Tang  <cltang@codesourcery.com>

* elfxx-mips.c (mips_elf_calculate_relocation): Correct
R_MIPS16_HI16/R_MIPS16_LO16 handling of two cleared lower bits,
update comments.

2011-12-13  Yao Qi  <yao@codesourcery.com>

* tracepoint.c (trace_buffer_alloc): Replace magic numbers with
macros.
(upload_fast_traceframes, upload_fast_traceframes): Likewise.

*** empty log message ***

daily update