David Schleef [Mon, 11 Jul 2011 04:40:20 +0000 (21:40 -0700)]
deinterlace: change field handling through methods
This likely breaks stuff. The good: all of the methods now create
field images aligned with input frames, without timestamp mangling.
The bad: this touches a lot of code, much of which is hairy and in
need of cleanup. However, at this point we can reasonably create a
PSNR-based test.
Alessandro Decina [Sun, 21 Aug 2011 12:41:14 +0000 (14:41 +0200)]
multifilesink: reset ->streamheaders to NULL on _stop
Fixes invalid memory access reusing multifilesink
David Henningsson [Thu, 18 Aug 2011 11:37:39 +0000 (13:37 +0200)]
pulsesink: Allow writes in bigger chunks
There's no use in splitting the incoming data down to the segsize
limit - by writing as much as possible in one chunk, we increase
performance and avoid PulseAudio unnecessary rewinds.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Vincent Penquerc'h [Mon, 8 Aug 2011 21:14:28 +0000 (22:14 +0100)]
matroskademux: ensure no-more-pads is always emitted
In particular, do so even if failing to read while prerolling,
such as when reading from a partial file (eg, while it is being
downloaded).
This fixes a wedge in playbin2.
https://bugzilla.gnome.org/show_bug.cgi?id=651965
Vincent Penquerc'h [Tue, 16 Aug 2011 16:27:13 +0000 (17:27 +0100)]
flacdec: avoid timestamp/offset tracking going out of sync
The libFLAC API is callback based, and we must only call it to
output data when we know we have enough input data. For this
reason, a single processing step is done when receiving a buffer.
However, if there were metadata buffers still pending, a step
intended for the first audio frame might end up writing that
leftover metadata. Since a single step is done per buffer, this
will cause every buffer to be written one step late.
This would add some latency (a bufferfull's worth), possibly
lose a buffer when seeking or the like, and also cause timestamp
and offset to be applied to the wrong buffer, as updates to
the "current" segment last_stop (from incoming buffer timestamp)
will be applied to an output buffer originating from the previous
incoming buffer.
This fixes the issue by ensuring that, upon receiving the first
audio frame, processing is done till all metadata is processed,
so the next "single step" done will be for the audio frame. After
this, we should keep to 1 input buffer -> 1 output buffer and so
avoid getting out of sync.
https://bugzilla.gnome.org/show_bug.cgi?id=650960
Vincent Penquerc'h [Tue, 16 Aug 2011 14:32:07 +0000 (15:32 +0100)]
flacdec: bail on reserved value
Now that we look at the right bits, we can test against the reserved
value as we do for other fields.
https://bugzilla.gnome.org/show_bug.cgi?id=650960
Vincent Penquerc'h [Tue, 16 Aug 2011 14:27:43 +0000 (15:27 +0100)]
flacdec: fix bit twiddling
Right shifting a 8 bit value by 8 bits is twice too much
to get the high 4 bits.
https://bugzilla.gnome.org/show_bug.cgi?id=650960
Vincent Penquerc'h [Tue, 16 Aug 2011 14:22:46 +0000 (15:22 +0100)]
flacdec: warn if we see a variable block size where unsupported
https://bugzilla.gnome.org/show_bug.cgi?id=650960
Vincent Penquerc'h [Tue, 16 Aug 2011 17:25:29 +0000 (18:25 +0100)]
spectrum: avoid crashing by resetting the correct number of channels
https://bugzilla.gnome.org/show_bug.cgi?id=656606
Vincent Penquerc'h [Tue, 16 Aug 2011 12:16:22 +0000 (13:16 +0100)]
flacparse: fix off by one in frame size check
Yes, I was tracking another bug and the small test file I generated
to test with improbably just happened to trigger this, with a second
and last frame of 1615 bytes.
https://bugzilla.gnome.org/show_bug.cgi?id=656649
Tim-Philipp Müller [Sun, 14 Aug 2011 19:46:01 +0000 (20:46 +0100)]
id3demux: remove specs from git as well now that parsing code is in -base
Mark Nauwelaerts [Thu, 14 Jul 2011 13:42:36 +0000 (15:42 +0200)]
id3demux: use -base provided id3 tag parsing
https://bugzilla.gnome.org/show_bug.cgi?id=654388
Tim-Philipp Müller [Sat, 13 Aug 2011 15:51:22 +0000 (16:51 +0100)]
jackaudiosrc: fix error message code
And also post 'not found' error if jackd is not even installed.
Stefan Kost [Fri, 12 Aug 2011 14:32:58 +0000 (16:32 +0200)]
qtdemux: initialize bitrate variable and reset for each loop
Don't check eventually unset variable and don't accidentially use values from last
cycle.
Edward Hervey [Tue, 9 Aug 2011 09:28:17 +0000 (11:28 +0200)]
rtspsrc: Properly error out if SDP contains no streams
Also fixes unitialized variable error on macosx.
Vincent Penquerc'h [Tue, 9 Aug 2011 08:05:31 +0000 (09:05 +0100)]
ximagesrc: clear flags on buffer reuse
This will ensure a logically new buffer does not keep flags from
a previous use of that buffer (eg, DISCONT would be set on the first
buffer, and mistakenly kept when reused).
https://bugzilla.gnome.org/show_bug.cgi?id=653709
Vincent Penquerc'h [Mon, 8 Aug 2011 09:54:26 +0000 (10:54 +0100)]
v4l2: take care not to change the current format where appropriate
Some drivers are buggy are will change the current format when
processing VIDIOC_TRY_FMT. Save and restore the current format
to ensure the format is kept unchanged.
https://bugzilla.gnome.org/show_bug.cgi?id=649067
Sjoerd Simons [Sun, 7 Aug 2011 10:23:26 +0000 (12:23 +0200)]
v4l2src: Use fraction compare util function.
Use the fraction compare utility to compare function, not the
handcrafted one. The handcrafted one is buggy as it doesn't take into
account rounding error. For example comparing a framerate of 20/1 on a
camera configured as 30/1 fps would yield true: 1 == (1 * 20)/30 and not
re-configure the camera. Fixes #656104
Jan Schmidt [Wed, 3 Aug 2011 12:50:05 +0000 (22:50 +1000)]
matroska: Register new debug category
Register the matroskareadcommon debug category when the
plugin is loaded to avoid assertion output when debug is turned on.
Philippe Normand [Fri, 29 Jul 2011 11:03:55 +0000 (13:03 +0200)]
qtdemux: soften assertion check on stream size
https://bugzilla.gnome.org/show_bug.cgi?id=655570
Robert Krakora [Wed, 3 Aug 2011 08:09:42 +0000 (10:09 +0200)]
rtpjpegpay: Add support for H.264 payload in MJPEG container
See http://www.quickcamteam.net/uvc-h264/USB_Video_Payload_H.264_0.87.pdf
Fixes bug #655530.
Tristan Matthews [Wed, 3 Aug 2011 02:05:08 +0000 (22:05 -0400)]
jackaudiosink: Don't call g_alloca() in process_cb
g_alloca() is not RT-safe, so instead we should allocate the
memory needed in advance. Fixes #655866
Tim-Philipp Müller [Tue, 2 Aug 2011 22:42:58 +0000 (23:42 +0100)]
docs: fix two more Since: tags
Mart Raudsepp [Sun, 31 Jul 2011 01:19:00 +0000 (04:19 +0300)]
deinterlace: Fix Since tags for fieldanalysis related new properties
commit
c1b100cf9c is after 0.10.29 and 0.10.30 was a branched release.
So fix Since tags from 0.10.29 to 0.10.31 for the new properties.
Tim-Philipp Müller [Fri, 29 Jul 2011 12:05:42 +0000 (13:05 +0100)]
pulsesink: fix variable-set-but-not-used compiler warning with older pulse versions
Mark Nauwelaerts [Fri, 29 Jul 2011 10:07:24 +0000 (12:07 +0200)]
rtpsession: properly init rtcp_min_interval
Arun Raghavan [Wed, 9 Mar 2011 05:34:36 +0000 (11:04 +0530)]
pulsesink: Add support for compressed formats
This adds support for various compressed formats (AC3, E-AC3, DTS and
MP3) payloaded in IEC 61937 format (used for transmission over S/PDIF,
HDMI and Bluetooth).
The acceptcaps() function allows bins to probe for what formats the sink
being connected to support. This only works after the element is set to
at least READY.
If the underlying sink changes and the format we are streaming is not
available, we emit a message that will allow upstream elements/bins to
block and renegotiate a new format.
Arun Raghavan [Tue, 1 Mar 2011 10:04:46 +0000 (15:34 +0530)]
pulsesink: Use the extended stream API if available
This uses the new extended API for creating streams. This will allow us
to support compressed formats natively in pulsesink as well.
Arun Raghavan [Thu, 28 Jul 2011 18:37:52 +0000 (00:07 +0530)]
pulsesrc: Add a source-output-index property
This exposes the source output index of the record stream that we open
so that clients can use this with the introspection if they want (to
move the stream, for example).
Mark Nauwelaerts [Thu, 28 Jul 2011 12:44:57 +0000 (14:44 +0200)]
rtpssrcdemux: keep a ref on the src pad while using it
Prevent a possible race if clear_ssrc() is called between getting the pad and
doing the push.
Based on patch by <olivier.crete@collabora.com>
https://bugzilla.gnome.org/show_bug.cgi?id=650916
Olivier Crête [Tue, 24 May 2011 08:29:57 +0000 (11:29 +0300)]
rtpssrcdemux: Make the pads lock recursive and hold it across the signal emit
We need to keep the lock held because we don't want a push before the "new-ssrc-pad"
handler has completed. But we may want to push an event from inside that handler, hence
the recursive mutex.
https://bugzilla.gnome.org/show_bug.cgi?id=650916
Olivier Crête [Tue, 24 May 2011 08:17:25 +0000 (11:17 +0300)]
rtpssrcdemux: Use PADs lock
https://bugzilla.gnome.org/show_bug.cgi?id=650916
Sjoerd Simons [Wed, 27 Jul 2011 17:15:20 +0000 (18:15 +0100)]
rtph264depay: Cope with FU-A E bit not being set
Some h264 payloaders are unfortunately buggy and don't correctly set the
E bit in FU-A NAL when they have ended. Work around this by assuming
such a fragmentation unit has ended when there was no packet loss and a
new NAL is started
Arun Raghavan [Tue, 12 Apr 2011 11:31:47 +0000 (17:01 +0530)]
ac3parse: Support switching alignment on-the-fly
This allows switching of alignment for E-AC3 streams at run-time. This
is requested by downstream elements via a custom event.
https://bugzilla.gnome.org/show_bug.cgi?id=650313
Arun Raghavan [Sat, 9 Apr 2011 06:56:56 +0000 (12:26 +0530)]
ac3parse: Add support for IEC 61937 alignment
When pushing out buffers over S/PDIF or HDMI, IEC 61937 payloading
requires each buffer to contain 6 blocks from each substream. This adds
code to collect all the frames needed to meet this requirement before
pushing out a buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=650313
Olivier Crête [Wed, 8 Jun 2011 19:57:37 +0000 (15:57 -0400)]
rtpsession: Always send application requested feedback in immediate mode
Send as many application requested feedback messages in immediate mode, even if they
have already been sent.
https://bugzilla.gnome.org/show_bug.cgi?id=654583
Olivier Crête [Wed, 8 Jun 2011 18:48:01 +0000 (14:48 -0400)]
rtpsession: Don't let the computed RTP bandwidth fall too low
If it falls too low, the computed RTCP bandwidth will be near zero and
the RTCP thread will be stopped.
https://bugzilla.gnome.org/show_bug.cgi?id=654583
Olivier Crête [Mon, 25 Apr 2011 20:13:38 +0000 (16:13 -0400)]
rtpsession: Wait longer to timeout SSRC collision
Using the current RTCP interval to timeout SSRC collision can lead to
collisions being timed out immediately if a BYE packet is sent because
it is sent immediately, so the interval is 0. This is not what we
want. So just set a static 10 times the default RTCP interval, it
should be enough
https://bugzilla.gnome.org/show_bug.cgi?id=648642
Mark Nauwelaerts [Tue, 19 Jul 2011 11:38:01 +0000 (13:38 +0200)]
rtspsrc: set SOURCE flag at init time
Fixes #654816.
Olivier Crête [Mon, 18 Jul 2011 20:46:27 +0000 (16:46 -0400)]
rtph264depay: Complete merged AU on marker bit
The marker bit on a RTP packet means the AU has been completed, so push it out
immediately to reduce the latency.
https://bugzilla.gnome.org/show_bug.cgi?id=654850
Olivier Crête [Tue, 19 Jul 2011 00:27:38 +0000 (20:27 -0400)]
rtph264pay: Only set the marker bit on the last NALU of a multi-NALU access unit
An access unit could contain multiple NAL units, in that case, only the last
RTP packet of the last NALU should have its marker bit set.
https://bugzilla.gnome.org/show_bug.cgi?id=654850
Alessandro Decina [Wed, 20 Jul 2011 06:52:58 +0000 (08:52 +0200)]
multipart: fix compiler warning
Mark Nauwelaerts [Tue, 19 Jul 2011 10:05:51 +0000 (12:05 +0200)]
auparse: avoid hanging on invalid short input
... as in such case there is no srcpad yet on which to forward EOS.
Thiago Santos [Mon, 18 Jul 2011 18:13:33 +0000 (15:13 -0300)]
pulsesrc: Fix default value leaking
Remember to free the default value of client name, avoiding a
leak
Mark Nauwelaerts [Mon, 18 Jul 2011 12:24:48 +0000 (14:24 +0200)]
rtph264depay: reset upon FLUSH_STOP
... which is particularly needed when merging NAL units, where not resetting
would lead to output of an older (pre-flush) AU (with unintended timestamp).
Mark Nauwelaerts [Mon, 18 Jul 2011 12:30:51 +0000 (14:30 +0200)]
multifilesink: do not use g_slist_free_full
... as that is only in GLib 2.28, which is not yet required at this time.
Alessandro Decina [Mon, 18 Jul 2011 07:38:26 +0000 (09:38 +0200)]
multifilesink: add max-files property
Add max-files property to limit the number of files saved on disk.
API: multifilesink::max-files
Alessandro Decina [Sun, 17 Jul 2011 21:36:55 +0000 (23:36 +0200)]
multifilesink: refactor file opening and closing code
Alexey Fisher [Sat, 16 Jul 2011 17:38:51 +0000 (19:38 +0200)]
matroskademux: fix pixel-aspect-ratio if header has only one display variable
Current matroska demux calculates the pixel aspect ratio only if both
DisplayHeight and DisplayWidth are set, but it is legal to use only
one variable if the other is equal to PixelWidth or PixelHeight, at
least the mkclean utility is doing that. So this makse mkcleaned
files play correctly.
https://bugzilla.gnome.org/show_bug.cgi?id=654744
Antoine Jacoutot [Sat, 16 Jul 2011 22:47:50 +0000 (23:47 +0100)]
goom: fix build on PPC on openbsd
A missing sys/param.h include results in:
/usr/include/sys/proc.h:64: error: 'MAXLOGNAME' undeclared here (not in a
function)
/usr/include/sys/proc.h:285: error: 'MAXCOMLEN' undeclared here (not in a
function)
when compiling goom on openbsd/ppc. We can just remove the two sys/ includes
here, they are not needed for anything.
https://bugzilla.gnome.org/show_bug.cgi?id=654749
Olivier Crête [Fri, 15 Jul 2011 00:10:02 +0000 (20:10 -0400)]
rtppcmApay/depay: Static clock rates on static payloads, dynamic on dynamic
Partially reverts
397dc60b
Olivier Crête [Fri, 4 Mar 2011 20:41:22 +0000 (15:41 -0500)]
rtph264pay: Implement getcaps
Convert profile-level-id from RTP caps into video/x-h264 style caps (with profile and level)
Mark Nauwelaerts [Tue, 12 Jul 2011 13:04:38 +0000 (15:04 +0200)]
rtspsrc: fix seeking regression
... introduced when shuffling around code for the async implementation
by setting state of source (and udp sources) in _play before downstream
flushing is undone.
René Stadler [Mon, 11 Jul 2011 12:23:41 +0000 (15:23 +0300)]
ac3parse: fix buffer duration on blocks-per-frame change
The gst_base_parse_set_frame_rate call was predicated on a change to
sample rate, duration or profile. However, the block count per frame can
also change between packets, which would result in incorrect buffer
durations.
David Schleef [Sun, 10 Jul 2011 02:23:41 +0000 (19:23 -0700)]
multifilesrc: Improve looping
Add start-index and stop-index properties.
Jonny Lamb [Thu, 16 Jun 2011 12:57:03 +0000 (13:57 +0100)]
multifile: add loop property to multifilesrc
Fixes: #652727
Signed-off-by: Jonny Lamb <jonnylamb@jonnylamb.com>
Signed-off-by: David Schleef <ds@schleef.org>
Philip Jägenstedt [Fri, 20 Nov 2009 09:07:43 +0000 (10:07 +0100)]
directsoundsink: 16-bit audio is signed, 8-bit is unsigned.
Pretending to handle 8-bit signed causes distorted audio when
actually given such audio, which you will get if passing 8-bit
unsigned through audioconvert ! audioresample, as audioresample
only handles 8-bit signed. Fixes #605834.
Signed-off-by: David Schleef <ds@schleef.org>
Alexey Fisher [Thu, 7 Jul 2011 16:27:36 +0000 (18:27 +0200)]
matroskademux: handle blocks with duration=0
Some video frames, for example alt-ref frame in VP8, will be
never displayed. This is why it has duration=0.
This patch allow to use this duration.
Bug: 654175
Signed-off-by: Alexey Fisher <bug-track@fisher-privat.net>
David Schleef [Thu, 7 Jul 2011 00:18:05 +0000 (17:18 -0700)]
qtmux: Add direct dirac mapping
René Stadler [Wed, 29 Jun 2011 17:59:26 +0000 (20:59 +0300)]
pulsesink: prevent race condition causing ref leak
Since commit 8bfd80, gst_pulseringbuffer_stop doesn't wait for the
deferred call to be run before returning. This causes a race when
READY->NULL is executed shortly after, which stops the mainloop. This
leaks the element reference which is passed as userdata for the callback
(introduced in commit 7cf996, bug #614765).
The correct fix is to wait in READY->NULL for all outstanding calls to
be fired (since libpulse doesn't provide a DestroyNotify for the
userdata). We get rid of the reference passing from 7cf996 altogether,
since finalization from the callback would anyways lead to a deadlock.
Re-fixes bug #614765.
René Stadler [Mon, 4 Jul 2011 05:58:14 +0000 (08:58 +0300)]
pulsesink: small cleanup of copy-paste code
René Stadler [Wed, 29 Jun 2011 16:50:42 +0000 (19:50 +0300)]
pulsesink: remove unused member variable and misleading log message
Wim changed it in commit 8bfd80 so that pa_defer_ran is not read
anywhere.
The log message used to annotate a mainloop_wait call which is gone.
David Schleef [Mon, 4 Jul 2011 19:58:38 +0000 (12:58 -0700)]
goom: Don't answer lantency queries before negotiation
Mark Nauwelaerts [Mon, 4 Jul 2011 12:30:09 +0000 (14:30 +0200)]
jpegdec: avoid crashing on invalid input without components
Mark Nauwelaerts [Mon, 4 Jul 2011 09:25:28 +0000 (11:25 +0200)]
flvmux: pass along segment info to collectpads
... so it can track this and be subsequently used to determine running time etc.
Mark Nauwelaerts [Mon, 4 Jul 2011 09:24:23 +0000 (11:24 +0200)]
flvdemux: indicate raw format in aac caps
David Schleef [Mon, 4 Jul 2011 02:51:32 +0000 (19:51 -0700)]
pulse: Increase ranks to PRIMARY + 10
So that pulsesrc/pulsesink get chosen over other possible PRIMARY
src/sinks by autoaudiosink. Presumably, if pulse is available, it
is always preferred over another src/sink.
Fixes: #647540.
David Schleef [Fri, 1 Jul 2011 01:47:48 +0000 (18:47 -0700)]
multipartmux: Add \r\n to tail of pushed buffers
Clients such as Firefox require the \r\n after the payload.
Branko Subasic [Thu, 16 Jun 2011 12:52:51 +0000 (14:52 +0200)]
matroskademux: avoid looping when searching for clusters
Fixes some bugs that results in the demuxer looping when seaching
for clusters in non-finalized files.
https://bugzilla.gnome.org/show_bug.cgi?id=652195
Debarshi Ray [Fri, 10 Jun 2011 13:24:48 +0000 (18:54 +0530)]
matroskaparse: fix reference counting of parse->streamheader
https://bugzilla.gnome.org/show_bug.cgi?id=652286
Signed-off-by: David Schleef <ds@schleef.org>
David Schleef [Wed, 29 Jun 2011 21:39:52 +0000 (14:39 -0700)]
jpegenc: Don't round up size of encoded buffers
For some reason, in code dating to 2001, encoded jpeg buffers were
rounded up to multiples of 4 bytes. With the added bonus that the
extra bytes are unwritten, causing valgrind issues. Oops. I can't
think of any reason why JPEG buffers need to be multiples of 4 bytes,
so I removed the padding. There might be some code somewhere that
depends on this behavior, so if this needs to be reverted, please fix
the valgrind issues.
Mark Nauwelaerts [Wed, 29 Jun 2011 10:05:04 +0000 (12:05 +0200)]
qtmux: free date tag
Jonas Larsson [Tue, 28 Jun 2011 10:26:37 +0000 (12:26 +0200)]
aacparse: not so greedy minimum frame size
Fixes #653559.
David Schleef [Sat, 25 Jun 2011 18:39:23 +0000 (11:39 -0700)]
configure: remove non-pkg-config check for shout
Fixes: 653327
Andoni Morales Alastruey [Mon, 20 Jun 2011 16:49:57 +0000 (18:49 +0200)]
dv1394src: make the internal clock thread safe
Fixes: #653091.
Miguel Angel Cabrera Moya [Fri, 24 Jun 2011 09:54:29 +0000 (11:54 +0200)]
rtpjitterbuffer: return correct type when assertion fails
David Schleef [Thu, 23 Jun 2011 18:28:27 +0000 (11:28 -0700)]
Automatic update of common submodule
From 69b981f to 605cd9a
Arun Raghavan [Wed, 2 Feb 2011 10:48:54 +0000 (16:18 +0530)]
pulse: Drop support for PA versions before 0.9.16
This drops support fof PulseAudio versions prior to 0.9.16, which was
released about 1.5 years ago. Testing with very old versions is not
feasible and we don't want to maintain 2 independent code-paths.
Mark Nauwelaerts [Tue, 21 Jun 2011 13:15:06 +0000 (15:15 +0200)]
rtpmp4adepay: fix output buffer timestamps in case of multiple frames
Olivier Crête [Mon, 20 Jun 2011 20:47:36 +0000 (16:47 -0400)]
rtpsession: The signal has 5 arguments, not 4
Tim-Philipp Müller [Sat, 18 Jun 2011 12:43:02 +0000 (13:43 +0100)]
Bump git version after unplanned 0.10.30 release
Merge branch '0.10.30'
Conflicts:
configure.ac
docs/plugins/inspect/plugin-1394.xml
docs/plugins/inspect/plugin-aasink.xml
docs/plugins/inspect/plugin-alaw.xml
docs/plugins/inspect/plugin-alpha.xml
docs/plugins/inspect/plugin-alphacolor.xml
docs/plugins/inspect/plugin-annodex.xml
docs/plugins/inspect/plugin-apetag.xml
docs/plugins/inspect/plugin-audiofx.xml
docs/plugins/inspect/plugin-audioparsers.xml
docs/plugins/inspect/plugin-auparse.xml
docs/plugins/inspect/plugin-autodetect.xml
docs/plugins/inspect/plugin-avi.xml
docs/plugins/inspect/plugin-cacasink.xml
docs/plugins/inspect/plugin-cairo.xml
docs/plugins/inspect/plugin-cutter.xml
docs/plugins/inspect/plugin-debug.xml
docs/plugins/inspect/plugin-deinterlace.xml
docs/plugins/inspect/plugin-dv.xml
docs/plugins/inspect/plugin-efence.xml
docs/plugins/inspect/plugin-effectv.xml
docs/plugins/inspect/plugin-equalizer.xml
docs/plugins/inspect/plugin-esdsink.xml
docs/plugins/inspect/plugin-flac.xml
docs/plugins/inspect/plugin-flv.xml
docs/plugins/inspect/plugin-flxdec.xml
docs/plugins/inspect/plugin-gconfelements.xml
docs/plugins/inspect/plugin-gdkpixbuf.xml
docs/plugins/inspect/plugin-goom.xml
docs/plugins/inspect/plugin-goom2k1.xml
docs/plugins/inspect/plugin-gstrtpmanager.xml
docs/plugins/inspect/plugin-halelements.xml
docs/plugins/inspect/plugin-icydemux.xml
docs/plugins/inspect/plugin-id3demux.xml
docs/plugins/inspect/plugin-imagefreeze.xml
docs/plugins/inspect/plugin-interleave.xml
docs/plugins/inspect/plugin-isomp4.xml
docs/plugins/inspect/plugin-jack.xml
docs/plugins/inspect/plugin-jpeg.xml
docs/plugins/inspect/plugin-level.xml
docs/plugins/inspect/plugin-matroska.xml
docs/plugins/inspect/plugin-mulaw.xml
docs/plugins/inspect/plugin-multifile.xml
docs/plugins/inspect/plugin-multipart.xml
docs/plugins/inspect/plugin-navigationtest.xml
docs/plugins/inspect/plugin-oss4.xml
docs/plugins/inspect/plugin-ossaudio.xml
docs/plugins/inspect/plugin-png.xml
docs/plugins/inspect/plugin-pulseaudio.xml
docs/plugins/inspect/plugin-replaygain.xml
docs/plugins/inspect/plugin-rtp.xml
docs/plugins/inspect/plugin-rtsp.xml
docs/plugins/inspect/plugin-shapewipe.xml
docs/plugins/inspect/plugin-shout2send.xml
docs/plugins/inspect/plugin-smpte.xml
docs/plugins/inspect/plugin-soup.xml
docs/plugins/inspect/plugin-spectrum.xml
docs/plugins/inspect/plugin-speex.xml
docs/plugins/inspect/plugin-taglib.xml
docs/plugins/inspect/plugin-udp.xml
docs/plugins/inspect/plugin-video4linux2.xml
docs/plugins/inspect/plugin-videobox.xml
docs/plugins/inspect/plugin-videocrop.xml
docs/plugins/inspect/plugin-videofilter.xml
docs/plugins/inspect/plugin-videomixer.xml
docs/plugins/inspect/plugin-wavenc.xml
docs/plugins/inspect/plugin-wavpack.xml
docs/plugins/inspect/plugin-wavparse.xml
docs/plugins/inspect/plugin-ximagesrc.xml
docs/plugins/inspect/plugin-y4menc.xml
win32/common/config.h
Tim-Philipp Müller [Fri, 17 Jun 2011 09:37:33 +0000 (10:37 +0100)]
sunaudio: fix typo in comment
Stefan Kost [Fri, 17 Jun 2011 00:07:09 +0000 (03:07 +0300)]
audioecho: fix param flags
If the parameter cannot be changed in paused&playing, it is not controlable. Set
the appropriate mutability flag instead.
Tim-Philipp Müller [Wed, 15 Jun 2011 22:57:34 +0000 (23:57 +0100)]
Release 0.10.30
This is an ad-hoc release that is almost identical to 0.10.29:
* work around GLib atomic ops API change
* better handling of malformed buffers in RTP depayloders
* some minor compilation fixes
Raimo Järvi [Wed, 8 Jun 2011 15:33:10 +0000 (18:33 +0300)]
udp: Fix compiler warning on mingw-w64
Fixes: #652144.
gstudpnetutils.h:32:0: error: "WINVER" redefined
/usr/i686-w64-mingw32/sys-root/mingw/include/_mingw.h:231:0: note: this is the
location of the previous definition
David Schleef [Sat, 4 Jun 2011 20:49:52 +0000 (13:49 -0700)]
interleave: Work around changes in g_atomic API
See #651514 for details.
Jose Antonio Santos Cadenas [Wed, 18 May 2011 10:36:40 +0000 (12:36 +0200)]
rtp: Fix segmentation fault processing payload buffers
This commit checks if the value returned by
gst_rtp_buffer_get_payload_buffer and
gst_rtp_buffer_get_payload_subbuffer is NULL before using it.
Pino Toscano [Mon, 16 May 2011 07:04:31 +0000 (09:04 +0200)]
pulse: Define PATH_MAX if it isn't defined
GNU Hurd for example doesn't define it.
Sebastian Dröge [Fri, 29 Apr 2011 06:55:19 +0000 (08:55 +0200)]
wavenc: Allow setcaps to be called after a format was negotiated if it's compatible
Otherwise wavenc will fail if upstream decides to set equivalent caps or caps
with additional information later.
Thanks to Alexander Schremmer for finding this bug.
Stefan Kost [Thu, 9 Jun 2011 18:06:28 +0000 (21:06 +0300)]
matroska: add missing stdio include for sscanf
Mark Nauwelaerts [Mon, 13 Jun 2011 15:05:19 +0000 (17:05 +0200)]
audioparsers: not so greedy minimum frame size
... which will be determined by parsing anyway, and avoids introducing
redundant additional latency.
Raimo Järvi [Wed, 8 Jun 2011 15:33:10 +0000 (18:33 +0300)]
udp: Fix compiler warning on mingw-w64
Fixes: #652144.
gstudpnetutils.h:32:0: error: "WINVER" redefined
/usr/i686-w64-mingw32/sys-root/mingw/include/_mingw.h:231:0: note: this is the
location of the previous definition
Debarshi Ray [Mon, 6 Jun 2011 12:51:04 +0000 (18:21 +0530)]
matroska: refactor code common to matroskademux and matroskaparse
Move the following function to matroska-read-common.[ch] from
matroska-demux.c and matroska-parse.c:
- gst_matroska_{demux,parse}_parse_chapters
https://bugzilla.gnome.org/show_bug.cgi?id=650877
Debarshi Ray [Mon, 6 Jun 2011 09:17:27 +0000 (14:47 +0530)]
matroska: refactor code common to matroskademux and matroskaparse
Move the following function to matroska-read-common.[ch] from
matroska-demux.c and matroska-parse.c:
- gst_matroska_{demux,parse}_parse_attachments
https://bugzilla.gnome.org/show_bug.cgi?id=650877
Debarshi Ray [Mon, 6 Jun 2011 07:13:14 +0000 (12:43 +0530)]
matroska: refactor code common to matroskademux and matroskaparse
Move the following function to matroska-read-common.[ch] from
matroska-demux.c and matroska-parse.c:
- gst_matroska_{demux,parse}_parse_attached_file
https://bugzilla.gnome.org/show_bug.cgi?id=650877
Debarshi Ray [Sun, 5 Jun 2011 17:15:55 +0000 (22:45 +0530)]
matroska: refactor code common to matroskademux and matroskaparse
Move the following function to matroska-read-common.[ch] from
matroska-demux.c and matroska-parse.c:
- gst_matroska_{demux,parse}_parse_info
https://bugzilla.gnome.org/show_bug.cgi?id=650877
Debarshi Ray [Sun, 5 Jun 2011 04:45:23 +0000 (10:15 +0530)]
matroska: refactor code common to matroskademux and matroskaparse
Move the following function to matroska-read-common.[ch] from
matroska-demux.c and matroska-parse.c:
- gst_matroska_{demux,parse}_parse_metadata
https://bugzilla.gnome.org/show_bug.cgi?id=650877
Debarshi Ray [Sun, 5 Jun 2011 04:24:42 +0000 (09:54 +0530)]
matroska: refactor code common to matroskademux and matroskaparse
Move the following function to matroska-read-common.[ch] from
matroska-demux.c and matroska-parse.c:
- gst_matroska_{demux,parse}_parse_metadata_id_tag
https://bugzilla.gnome.org/show_bug.cgi?id=650877
Debarshi Ray [Sat, 4 Jun 2011 20:54:41 +0000 (02:24 +0530)]
matroska: refactor code common to matroskademux and matroskaparse
Move the following function to matroska-read-common.[ch] from
matroska-demux.c and matroska-parse.c:
- gst_matroska_{demux,parse}_parse_metadata_id_simple_tag
https://bugzilla.gnome.org/show_bug.cgi?id=650877
Mark Nauwelaerts [Mon, 6 Jun 2011 10:42:53 +0000 (12:42 +0200)]
rtspsrc: reset state tracking variable when appropriate
... so we don't end up interrupting an operation that should not be interrupted
based on the indication of a previous interruptable operation.
projects / platform / upstream / gstreamer.git / log