Nian Jing [Tue, 23 Apr 2019 05:55:44 +0000 (13:55 +0800)]
tvafe: fix pal60 afbc abnormal [1/1]
PD#SWPL-7057
Problem:
pal60 abnormal when enable afbc
Solution:
fix the v_active size
Verify:
test on x301
Change-Id: I02c6077ac364c4f585fb3cf5742e0b4228c39cd2
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Jianxin Pan [Tue, 23 Apr 2019 11:37:41 +0000 (19:37 +0800)]
schedtune: fix crash when there is cpu boot fail in hmp [1/1]
PD#SWPL-7656
Problem:
crash when there is cpu boot fail in hmp
Solution:
fix crash when there is cpu boot fail in hmp
Verify:
W400
Change-Id: I0153975593adb0bfcbc3c3bd6543f0fb2e6bf2e0
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Qianggui Song [Fri, 18 Jan 2019 03:26:47 +0000 (11:26 +0800)]
ir: add ir learning function [1/1]
PD#SWPL-4130
Problem:
No ir learning function in current source code
Solution:
Provide two ways to use ir learning function
1. sysfs
/*start learning*/
echo 1 > /sys/class/remote/amremote/ir_learnning
/*get data*/
cat /sys/class/remote/amremote/learned_pulse
/*stop learning*/
echo 0 > /sys/class/remote/amremote/ir_learnning
2. ioctl
/*start/stop learnning 1/0*/
REMOTE_IOC_SET_IR_LEARING
/*get raw data*/
REMOTE_IOC_GET_RAW_DATA
Verify:
U200 and W400
Change-Id: Ibb03838402d9baa6e910b3162ffcc63b57048890
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Long Yu [Mon, 15 Apr 2019 08:40:25 +0000 (16:40 +0800)]
emmc: Clear the value of txdelay in legacy mode on the resume process [1/1]
PD#SWPL-7181
Problem:
switch to high-speed from hs200 failed for resume process.
Solution:
set tx_delay as 0 for legacy mode.
clear cfg_cmd_setup
Verify:
verify by TL1
Change-Id: I5dbb1bbc391da864464bf137837a2b0f54ccda42
Signed-off-by: Long Yu <long.yu@amlogic.com>
Hang Cheng [Mon, 22 Apr 2019 12:12:08 +0000 (20:12 +0800)]
hdmirx: disable interrupt when suspend or shutdown [1/1]
PD#SWPL-7570
Problem:
there's frequent interrupt when suspend, and can't
enter suspend successfully
Solution:
disable interrupt when suspend/shutdown
Verify:
x301
Change-Id: Iad13159da8cf0d48c6374c17df957c26aa177024
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
Wenfeng Guo [Tue, 16 Apr 2019 08:06:37 +0000 (16:06 +0800)]
di: fix TL1 cave video 1080i 60hz have drawing [1/1]
PD#SWPL-7006
Problem:
TL1 cave video 1080i 60hz have drawing.
Solution:
dark scenes don't into pulldown32 by vlsi yanling
Verify:
TL1
Signed
Change-Id: Ib77c0f99940c416943baa9b9a8a02a059b274e5b
Signed-off-by: Wenfeng Guo <wenfeng.guo@amlogic.com>
qiyao.zhou [Tue, 23 Apr 2019 06:30:24 +0000 (14:30 +0800)]
dts: flanklin bring up based on google-ref! [1/1]
PD#SWPL-7184
Problem:
flanklin bring up based on google-ref.
Solution:
Modify copy file for franklin.
Verify:
verify it on franklin.
Change-Id: If55159835daf0a87439647586526f836a226504c
Signed-off-by: qiyao.zhou <qiyao.zhou@amlogic.com>
Yong Qin [Mon, 22 Apr 2019 12:18:23 +0000 (20:18 +0800)]
di: small window bottom of the screen no video [1/1]
PD#TV-4708
Problem:
small window,v scaling mode, bottom of the screen is no video.
Solution:
vline is odd, mif out is not more enouth
Verify:
verify on TL1
Change-Id: I2ac35af3632e8b14df5c773b322d4b2d64b050ba
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Shuai Li [Mon, 22 Apr 2019 07:03:46 +0000 (15:03 +0800)]
audio: disable tl1 acodec dac dapm to depop [1/1]
PD#TV-3933
Problem:
Tl1 acodec has pop sound when first sound appear.
Solution:
Disable the DAPM which disable/enable every time
start/stop the audio stream.
Verify:
Tl1 X301.
Change-Id: Iaaf7da125de513bd8297f6c6e41af0a42c9d25bd
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
nengwen.chen [Tue, 23 Apr 2019 02:52:07 +0000 (10:52 +0800)]
atv_demod: fix audio output when adjust the input amplitude [1/1]
PD#TV-4901
Problem:
fix audio output when adjust the input amplitude.
Solution:
fix audio output when adjust the input amplitude.
Verify:
verified by x301
Change-Id: If08e4adff6f4d0355448687ebe6756fa2e155704
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Hong Guo [Thu, 18 Apr 2019 08:42:01 +0000 (16:42 +0800)]
supsend: update gx_pm driver [1/1]
PD#SWPL-7226
Problem:
update gx_pm driver
Solution:
update gx_pm driver
Verify:
test pass on tl1_x309
Change-Id: If078b0744cb8ce46029d77512d5755f4d40c2014
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Jianxin Pan [Mon, 22 Apr 2019 10:57:12 +0000 (18:57 +0800)]
debug: save irqflag locally when ftrace_ramoops io [1/1]
PD#SWPL-6028
Problem:
save irqflag locally when ftrace_ramoops io
Solution:
save irqflag locally when ftrace_ramoops io
Verify:
TL1 x301
Change-Id: I6df9700cceaccc97dc983d88ada73197a6968f73
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Brian Zhu [Thu, 11 Apr 2019 08:16:35 +0000 (16:16 +0800)]
vpp: use new interface to increase accuracy of ar calculation [1/2]
PD#OTT-2068
Problem:
When playing 1280x128 video under normal screen mode, the aspect ratio from
decodec is not accurate enough by multipling 0x100. (128x256/1280=25.6).
Dropping 0.6 will cause height losing 9 lines.
Solution:
Using new interface to pass real ar width and height following steps:
1.Set old ar variable to 0x3ff as a trigger flag.
2.set the original ar value into sar_width and sar_height of vframe
Verify:
verified on franklin
Change-Id: I8a794edd968a76f198ee9cb168a7cfb858c858f8
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Xiaoming Sui [Mon, 8 Apr 2019 12:04:51 +0000 (20:04 +0800)]
avsync: tsync: fix the avsync for ms12 [3/4]
PD#SWPL-5837
Problem:
dtv is out of avsync when dolby ms12 certificate
Solution:
when the audio is played, recalculate the apts to sync
pcrsrc when pcrmaster.
Verify:
X301
Change-Id: Ia121e57ad69c5b0d211e14bf3a61f165457e54c7
Signed-off-by: Xiaoming Sui <xiaoming.sui@amlogic.com>
Xiaoming Sui [Mon, 15 Apr 2019 12:38:47 +0000 (20:38 +0800)]
avsync: spdif: fix the avsync for ms12 [1/4]
PD#SWPL-5837
Problem:
dtv is out of avsync when dolby ms12 certificate
Solution:
when the audio is played, recalculate the apts to sync
pcrsrc when pcrmaster.
Verify:
X301
Change-Id: I199383aa1c0de1b4f0ec646d9d066910b3bb2b42
Signed-off-by: Xiaoming Sui <xiaoming.sui@amlogic.com>
Zongdong Jiao [Mon, 22 Apr 2019 09:20:09 +0000 (17:20 +0800)]
hdmitx: move work_internal_intr to delayed_work [1/1]
PD#SWPL-6894
Problem:
Queue work 'work_internal_intr' cause the hdcp22 flicker
Solution:
Move work_internal_intr to delayed_work
Verify:
G12/U212
Change-Id: Ib05c82bb66c9ad7396790d5eb237ff486c56c980
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Evoke Zhang [Mon, 22 Apr 2019 10:30:02 +0000 (18:30 +0800)]
vdin: revert ignore v4l2start/stop ioctl when vdin1 used for preview [1/1]
PD#SWPL-7324
Problem:
tvafe work abnormal when use vdin1 preview
Solution:
revert the previous commit for v4l2start/stop
Verify:
x301
This reverts commit
81c1e1449c5e7362dc263bea76e134ba8fd25265.
Change-Id: I8cdefececb8b01cb86426684a6c700bc9bf8b615
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Shuai Li [Mon, 22 Apr 2019 02:52:18 +0000 (10:52 +0800)]
audio: enable hw resmaple pause thd [1/1]
PD#TV-4638
Problem:
Speaker output high frequency howling
after change from pattern 615 to pattern 1 on chroma22294.
The hw resampler keeps sending noise if it has no input.
Solution:
Enable the hw resample pause thd by default.
Verify:
TL1 X301.
Change-Id: Ib6f0924025e155eaa8ba0e3681b307f7ff56b449
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Yong Qin [Fri, 19 Apr 2019 11:27:56 +0000 (19:27 +0800)]
vlock: disable some log [1/1]
PD#SWPL-6994
Problem:
disable some log
Solution:
disable some log
Verify:
tl1
Change-Id: I53ceafbd35445f60d6c59ff9fd2632e8a6fc794f
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Yong Qin [Fri, 19 Apr 2019 11:18:25 +0000 (19:18 +0800)]
cec: interrupt irq src number is not right for tl1 [1/1]
PD#SWPL-6994
Problem:
Sometime will lose msg. because of the isr src
number connected to timer.
Solution:
modify irq src number to 203
Verify:
tl1
Change-Id: I12586b543dbf87a964ba79e1c82561f9516f8e3c
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Bencheng Jing [Thu, 18 Apr 2019 02:47:16 +0000 (10:47 +0800)]
amvecm: fix tm2 show green screen when play videos [1/1]
PD#SWPL-7183
Problem:
LC mtx use 10bit, should be 12bit
Solution:
add 12bit 709 mtx
Verify:
ab311
Change-Id: I2367fc7b7ef4cb164d86348b618d13d465c7a6a1
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Evoke Zhang [Sat, 20 Apr 2019 09:55:10 +0000 (17:55 +0800)]
vdin: disable afbce under 4k resolution [1/1]
PD#SWPL-7511
Problem:
no need enable vdin afbce under 4k,
it is no help for bandwidth with these resolution
Solution:
only enable vdin afbce for 4k resolution
Verify:
x301
Change-Id: I283efd872004846d158ef6c9addbd1e666d2f61a
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
binqi.zhang [Mon, 22 Apr 2019 06:07:22 +0000 (02:07 -0400)]
dts: update gpu freq tbl for 32bit kernel [1/1]
PD#SWPL-4253
Problem:
Compared with P212, GPU on g12a can not work with high
frequency
when running some cases like particle;
Solution:
update gpu freq tbl for buildroot
Verify:
build pass
GPU on g12a can work with high
freq when running particle
Change-Id: Ifcb286cd37faa9f618b48ab515ca360aba563a34
Signed-off-by: binqi.zhang <binqi.zhang@amlogic.com>
binqi.zhang [Wed, 17 Apr 2019 07:24:30 +0000 (03:24 -0400)]
dts: update gpu freq tbl for buildroot [1/1]
PD#SWPL-4253
Problem:
Compared with P212, GPU on g12a can not work with high frequency
when running some cases like particle;
Solution:
update gpu freq tbl for buildroot
Verify:
build pass
GPU on g12a can work with high freq when running particle
Change-Id: Ie10335d1f3a043d4418245d31efa8b42077031a9
Signed-off-by: binqi.zhang <binqi.zhang@amlogic.com>
Jianxin Pan [Mon, 22 Apr 2019 02:08:07 +0000 (19:08 -0700)]
Revert "audio: enable hw resmaple pause thd [1/1]"
This reverts commit
8398f8a917504fd4f3efd82306fcce1e2a1d8b80.
Change-Id: I76a3c8fc66b528b62e57630603ad3887b0b3abdc
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Jian Hu [Mon, 15 Apr 2019 08:32:04 +0000 (16:32 +0800)]
i2c: meson: add detail calculation process for i2c duty cycle [1/1]
PD#SWPL-7197
Problem:
There is not detail calculation process for i2c duty cycle
Solution:
add detail calculation process for i2c duty cycle
Verify:
verified on x301
Change-Id: Ifc222acda3268f792f63e84c6dc3513d80568e19
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Yi Zhou [Thu, 7 Mar 2019 08:12:38 +0000 (16:12 +0800)]
hdr_prime: add interface of HDR Prime SL driver [1/1]
PD#SWPL-5475
Problem:
need to add interface of HDR Prime SL driver
Solution:
add interface of HDR Prime SL driver
Verify:
U212
Change-Id: If0e62b74ccbaa4ede490e7a9896d9f5915480d6f
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Hong Guo [Fri, 12 Apr 2019 08:55:34 +0000 (16:55 +0800)]
SUSPEND: add alarm wakeup function [1/1]
PD#SWPL-7062
Problem:
add alarm wakeup function.
Solution:
add alarm wakeup function.
Verify:
g12b_w400,test pass.
Change-Id: I0ad6e373b52bfd8d628ad3c8964637174b5fc643
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Yingyuan Zhu [Wed, 10 Apr 2019 07:26:32 +0000 (15:26 +0800)]
watchdog: fix watchdog get lefttime error [1/1]
PD#SWPL-6937
Problem:
1.get lefttime error by 'cat sys/class/watchdog/watchdog0/timeleft' cmd.
2.if DTS is configured to feed watchdog by Android, the system will
restart automatically after wake up.
Solution:
1.modify the code to get time.
2.when the system wakes up, first judge whether the watchdog runs,
and then decide whether to start the watchdog.
Verify:
test pass on u200
Change-Id: If64888ffdd5651e8cfcace5ea0d0da31641bb397
Signed-off-by: Yingyuan Zhu <yingyuan.zhu@amlogic.com>
MingLiang Dong [Fri, 12 Apr 2019 03:03:27 +0000 (23:03 -0400)]
amvecm: match uboot sdr2hdr function [1/1]
PD#OTT-2524
Problem:
enable sdr2hdr function, uboot logo have color change
Solution:
match uboot sdr2hdr function
Verify:
verify on G12A
Change-Id: I160cd6141d09a385d299ca96a89eb1ebf09c86e8
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Yong Qin [Fri, 19 Apr 2019 02:15:51 +0000 (10:15 +0800)]
di: small window bottom of the screen is blank [1/1]
PD#TV-4708
Problem:
small window, bottom of the screen is covered by
blank on the online video
Solution:
vline is odd, mif out is not right
Verify:
verify on TL1
Change-Id: I39eb0cdfd2f4b200a09a9c8b779f509caf6dea37
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Shuai Li [Thu, 18 Apr 2019 10:15:54 +0000 (18:15 +0800)]
audio: enable hw resmaple pause thd [1/1]
PD#TV-4638
Problem:
Speaker output high frequency howling
after change from pattern 615 to pattern 1 on chroma22294.
The hw resampler keeps sending noise if it has no input.
Solution:
Enable the hw resample pause thd by default.
Verify:
TL1 X301.
Change-Id: I076d1b80c6482661fdc3fd5808f1cc231666d07e
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Evoke Zhang [Fri, 19 Apr 2019 03:30:42 +0000 (11:30 +0800)]
vdin: recycle garbage frame for afbc mode [1/1]
PD#TV-4335
Problem:
switch tvin signals will flash garbage screen
Solution:
recycle barbage frame for afbc mode
Verify:
x301
Change-Id: I17c13b5db7a506403aa5ac74568b7a9e16c075c0
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
shuanglong.wang [Fri, 12 Apr 2019 05:55:06 +0000 (13:55 +0800)]
video: compensation omxpts for pcr check [1/1]
PD#SWPL-5664
Problem:
pcr is probably adjust when test AL1 eyepatch test case
Solution:
the time is not accurate when check pcr and omx_pts differ, because
omx_pts is used the value that be set, but pcr is current. Here add
compensation for omx_pts
Verify:
verify by nts
Change-Id: I3e0f6f006fd79cf7cac4148fd18da72111a333c7
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
Yeping Miao [Wed, 3 Apr 2019 06:07:55 +0000 (14:07 +0800)]
dts: Improve axg_s400_v03sbr.dts [1/1]
PD#SWPL-6696
Problem:
Pad key '+' cannot work
Solution:
Add to pad key support list
Add more key support for SBR remote
Verify:
S400 S400_SBR A113D
Change-Id: I9bdc3053f2b3ce778e9c2f682fcf31ac054887b4
Signed-off-by: Yeping Miao <yeping.miao@amlogic.com>
Jiamin Ma [Fri, 19 Apr 2019 00:15:47 +0000 (08:15 +0800)]
unifikey: fix kasan bug reported in name_store [1/1]
PD#SWPL-7326
Problem:
slab-out-of-bounds in strlen called by name_store
Solution:
Make sure the string passed to strlen is always '\0'
ended
Verify:
Locally
Change-Id: Ifd78a100c0e34ff9afb527ebe7b044ceb5c3505e
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
peter wang [Fri, 12 Apr 2019 05:49:21 +0000 (13:49 +0800)]
amvideo: fix video block when pts discontinue [1/1]
PD#SWPL-5038
Problem:
image will block when pts discontinue
Solution:
do not show the frame when pts greater than pcr
Verify:
tested on Marconi
Change-Id: I57ea973b7fdcdc7cded2c5c9b681be29f0a31a4b
Signed-off-by: peter wang <peter.wang@amlogic.com>
Pengcheng Chen [Tue, 16 Apr 2019 03:33:04 +0000 (11:33 +0800)]
osd: fix afbc decoder error caused flicker in display [1/1]
PD#OTT-3000
Problem:
afbc decoder error caused flicker in display.
Solution:
close osd prefetch.
Verify:
Verified with raven
Change-Id: I44356c028b41e251f7a98b5e931b2cbd583b0829
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
qiyao.zhou [Mon, 15 Apr 2019 09:25:03 +0000 (17:25 +0800)]
dts: flanklin bring up based on google-ref! [1/2]
PD#SWPL-7184
Problem:
flanklin bring up based on google-ref.
Solution:
Modify copy file for franklin.
Verify:
verify it on franklin.
Change-Id: Ibaba2dcb7a3e8715243f5a93d69a1bf96e8c49a7
Signed-off-by: qiyao.zhou <qiyao.zhou@amlogic.com>
Hang Cheng [Tue, 16 Apr 2019 07:47:21 +0000 (15:47 +0800)]
hdmirx: modify drop video frame interface [1/1]
PD#SWPL-6785
Problem:
there's garbage frame show when signal change
Solution:
enable forward video frame skip interface, and set vdin
to skip one more frame to prevent garbage been shown
Verify:
X301
Change-Id: Id099558c733843f330b99246ea31fbbd0c18ed84
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
Yan Wang [Wed, 10 Apr 2019 09:34:48 +0000 (17:34 +0800)]
idle: sm1: enable sm1 idle function [1/1]
PD#SWPL-6255
Problem:
sm1 need enable idle for power.
Solution:
enable sm1 idle function.
Verify:
ac200
Change-Id: Ib106ac552660471f0275dc22374405939d521a62
Signed-off-by: Yan Wang <yan.wang@amlogic.com>
Guosong Zhou [Mon, 15 Apr 2019 06:56:09 +0000 (02:56 -0400)]
camera: add mipi csi driver for sm1 [1/1]
PD#SWPL-5388
Problem:
sm1 board camera need add mipi csi module
Solution:
add mipi csi module
Verify:
verified on SM1 AC200
Change-Id: I819f2f74aa8da7d725cb59e5636e790185964f79
Signed-off-by: Guosong Zhou <guosong.zhou@amlogic.com>
Huan Biao [Wed, 17 Apr 2019 06:57:58 +0000 (14:57 +0800)]
thermal: modify ipa parameter for sm1 [1/1]
PD#SWPL-7322
Problem:
sm1 ipa parameter not match soc power data
Solution:
update sm1 ipa dts parameter
Verify:
AC200
Change-Id: Ib636d5c4853d53cf6bafad9b5266e2b13dd7e85c
Signed-off-by: Huan Biao <huan.biao@amlogic.com>
Yinming Ding [Tue, 16 Apr 2019 09:39:06 +0000 (17:39 +0800)]
dvb_core: add SYS_DVBS2 SYS_DVBT2 delsys mode [1/1]
PD#SWPL-7017
Problem:
TV can't search DVB/S2/T2
Solution:
add SYS_DVBS2 SYS_DVBT2 delsys mode
Verify:
Verified by R314
Change-Id: I30e39d0c236baebc31622fdd5fe1a8fc18209fe0
Signed-off-by: Yinming Ding <yinming.ding@amlogic.com>
Tao Zeng [Tue, 16 Apr 2019 01:42:24 +0000 (09:42 +0800)]
kasan: bring up KASAN for 32bit os [2/2]
PD#SWPL-7085
Problem:
Currently kasan can't be used on 32bit kernel, it's difficult to debug
memory problems;
Solution:
Bring up KASAN on 32bit kernel
Verify:
p212
Change-Id: I4d80568f023315994e969c79b786eba856177c9c
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
Jian Cao [Thu, 4 Apr 2019 14:34:15 +0000 (22:34 +0800)]
gdc: add gdc interface with loading fw [1/2]
PD#SWPL-4611
Problem:
add gdc interface with loading fw
Solution:
add new gdc interface to request firmware
Verify:
Verfied on G12B-W400
Change-Id: Id8e0d600eec5f4777511b1fc0e38a1773db9e9cb
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
Tao Zeng [Wed, 10 Apr 2019 03:59:24 +0000 (11:59 +0800)]
ddr: bring up bandwidth support for sm1 [1/1]
PD#SWPL-6865
Problem:
ddr bandwidth measure is not supported on sm1
Solution:
1. Add port description and support for it
2. Record max/average bandwidth support;
3. Support up to 60 continue bandwidth sample
4. Fix bit mismatch of dmc monitor for sm1/tl1.
Verify:
sm1
Change-Id: I0b42db8214099b9cd6d1c3f00174dc65eebfc030
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
Zhe Wang [Wed, 17 Apr 2019 05:38:43 +0000 (13:38 +0800)]
audio: TM2 bringup: enable ADC for linein [1/1]
PD#SWPL-7027
Problem:
audio path AVin is on audio
Solution:
enable ADC for linein
Verify:
Verify on AB311
Change-Id: Iea1d694e0b605d62596635d85416d33f56dbbcb2
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Bencheng Jing [Tue, 16 Apr 2019 11:50:42 +0000 (19:50 +0800)]
amvecm: fix dnlp iRgnBgn and iRgnEnd not load db value [1/1]
PD#SWPL-7262
Problem:
dnlp iRgnBgn and iRgnEnd not load db value
Solution:
add refresh of iRgnBgn and iRgnEnd.
Verify:
on x301
Change-Id: I81ae91490a7fd2899eefd4f800948851ebbf21e7
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Brian Zhu [Tue, 16 Apr 2019 18:35:27 +0000 (02:35 +0800)]
vpp: don't overwrite on_pending state when enable vd layer [1/1]
PD#OTT-3244
Problem:
When vd layer state is on_pending, calling enable videolayer
function will overwrite the state. Then it will not enable video
layer really.
Solution:
Add the judgement to check if the state is on_pending.
Verify:
verified on W400
Change-Id: I0513a6610fdb108bec05858c7f6c7976be5e7edb
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
wenbiao zhang [Wed, 10 Apr 2019 02:15:13 +0000 (10:15 +0800)]
suspend: not do suspend action under freeze mode [1/1]
PD#TV-4213
Problem:
can't wake up by gpio/adc key when suspend into freeze mode
Solution:
not suspend gpio/adc when freeze
Verify:
X301
Change-Id: I32ff27aafebe35d8deb6e9b4d3daee686bbf90bc
Signed-off-by: wenbiao zhang <wenbiao.zhang@amlogic.com>
changqing.gao [Thu, 4 Apr 2019 09:24:40 +0000 (17:24 +0800)]
binder: fix memory leak [1/1]
PD#TV-3541
Problem:
1.only vmalloc 4KB at first.
2.if user space need more memory, try to allocate a new vmalloc
range with large size and move all related data to new place.
3.the first 4KB is not free when release this binder.
Solution:
free the first 4KB when release binder.
Verify:
R311
Change-Id: I4429de04a260671e4626b77ec340e47e436d5c8d
Signed-off-by: changqing.gao <changqing.gao@amlogic.com>
Bencheng Jing [Wed, 17 Apr 2019 03:26:58 +0000 (11:26 +0800)]
amvecm: fix sm1 green screen when play videos [1/1]
PD#SWPL-7302
Problem:
sm1 green screen when play videos
Solution:
add chip support
Verify:
s905D3
Change-Id: I50c0a9f889d72b65157a973bfe1df8dce10db64a
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Jianxin Pan [Wed, 3 Apr 2019 11:16:50 +0000 (19:16 +0800)]
debug: improve ftrace_ramoops for io trace [2/2]
PD#SWPL-6028
Problem:
improve ftrace_ramoops to debug bus hang
Solution:
1. in uboot
setenv initargs $initargs ramoops_io_en=1 loglevel=3;save;reset
2. in linux command line:
cat /sys/module/kernel/parameters/ramoops_io_en
to check if success.
3. after watchdog reboot, get trace data with:
cat /sys/fs/pstore/ftrace-ramoops-0
Verify:
TL1 x301
Change-Id: If1a2582b40a3ded31eedef5355eb0b8a5bf495c3
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Jiamin Ma [Thu, 11 Apr 2019 05:37:51 +0000 (13:37 +0800)]
earlycon: support aml-uart as the name for earlycon [1/1]
PD#SWPL-6969
Problem:
For some historical reason, aml-uart is configured as the earlycon
name in uboot, which is not recognized by 4.9 kernel
Solution:
support aml-uart as the name for earlycon
Verify:
Ampere
Change-Id: I53463ac6d27ff3e911aa675cd5d10d6cbf26ba05
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
Nanxin.Qin [Mon, 25 Mar 2019 10:03:13 +0000 (18:03 +0800)]
media: add the register sets for parser B [1/1]
PD#SWPL-5417
Problem:
bringup sm1 and tm2.
Solution:
add the register sets for parser B.
Verify:
AB311
Change-Id: I3c1620d69260f92c8d1590976950030604b7dd80
Signed-off-by: Nanxin.Qin <nanxin.qin@amlogic.com>
Evoke Zhang [Mon, 15 Apr 2019 11:30:10 +0000 (19:30 +0800)]
vdin: support dynamic dest_cfmt changing [1/1]
PD#TV-4306
Problem:
vdin afbc will show green screen when hdmirx change dest_cfmt after stable
Solution:
dynamic config vdin afbc with cfmt
Verify:
x301
Change-Id: I404c47934f090222a2cdd7cf98b619826cd92cc7
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Evoke Zhang [Wed, 10 Apr 2019 02:07:39 +0000 (10:07 +0800)]
vdin: ignore v4l2start/stop ioctl when vdin1 used for preview [1/1]
PD#SWPL-6840
Problem:
hdmi port can't screencap
Solution:
ignore v4l2start/stop ioctl when vdin1 used for preview
Verify:
x301
Change-Id: I26e7b057177a0b7ed203c04bd3008c2a34793b4a
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
nengwen.chen [Mon, 8 Apr 2019 07:34:22 +0000 (15:34 +0800)]
atv_demod: fix audio config (PAL_M, NTSC_M) when video is PAL [1/1]
PD#TV-4274
Problem:
fix audio config (PAL_M, NTSC_M) when video is PAL.
Solution:
fix audio config (PAL_M, NTSC_M) when video is PAL
Verify:
verified by x301.
Change-Id: I9be8d71d52a226b6422317be0b77ca6331f23147
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Xing Wang [Tue, 9 Apr 2019 03:20:57 +0000 (11:20 +0800)]
dts: audio: update vad for sm1 [1/1]
PD#SWPL-5427
Problem:
lack vad function for sm1
Solution:
add vad function for sm1
Verify:
ac200
Change-Id: Ib4118b16405102a72f98ff65396e6f9d98f97bca
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Pengcheng Chen [Wed, 10 Apr 2019 04:21:38 +0000 (12:21 +0800)]
osd: fix hotplug hdmi causes system crash [1/1]
PD#SWPL-7009
Problem:
hotplug hdmi causes system crash
when unplug hdmi display mode is null, hwc hasn't received
event and post frame normal but osd vsync lost, which caused
wait hw vsync timeout(1s), and fd leak.
Solution:
when process every frame, if display mode is null, exit frame process
just process fence.
Verify:
verified on Raven, franklin
Change-Id: Icbe7cd76776e46a6ed79c6cee3ea05772cc5f9d2
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Ting Li [Mon, 18 Feb 2019 10:45:27 +0000 (18:45 +0800)]
picdec: add picdec dev node for u200 u211 u212 w400 sm1 [1/1]
PD#SWPL-4551
Problem:
ImagePlayer cannot play picture
Solution:
add picdec dev node for u200 u211 u212 w400
Verify:
franklin
Change-Id: I35cc28e2ab06367f33a7326ce671b1ee461e6fb1
Signed-off-by: xi an <an.xi@amlogic.com>
Signed-off-by: li ting <ting.li@amlogic.com>
yicheng shen [Tue, 9 Apr 2019 03:45:19 +0000 (23:45 -0400)]
hdmirx: optimize phy setting [1/1]
PD#SWPL-3463
Problem:
Need update phy setting
Solution:
1.decrease pll bw;
2.add cdr lock level option
3.optimize signal detection time
Verify:
TL1
Change-Id: Idc24683430488d300fa2690fa9f8039905cf6a88
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
yicheng shen [Mon, 8 Apr 2019 07:15:50 +0000 (03:15 -0400)]
hdmirx: fix read edid error issue [1/1]
PD#SWPL-6751
Problem:
EDID information error after switching EDID 1.4 and 2.0 in OSD menu.
Solution:
Modify HPD reset handle when switch hdmi 2.0
Verify:
TL1
Change-Id: I5aa3126f6f870a733443f16b8975f83c515b9fd6
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
Bencheng Jing [Wed, 3 Apr 2019 14:02:02 +0000 (22:02 +0800)]
amvecm: fix CM/sat/bricon adjust not available [1/2]
PD#SWPL-6892
Problem:
fix CM/sat/bricon adjust not available
Solution:
fix CM/sat/bricon adjust not available
Verify:
U212
Change-Id: Ia6a1aebda35550801d4c7e16807714b8349431a4
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Zhe Wang [Mon, 15 Apr 2019 08:32:43 +0000 (16:32 +0800)]
audio: AB311 bringup, init 2 AMPs
AD82584f [1/1]
PD#SWPL-7174
Problem:
spk is out of work on AB311
Solution:
bringup AMP
ad82584f
Verify:
AB311
Change-Id: I8771fc204b19eeebed5247ec4c8984acbf004372
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Jian Cao [Thu, 4 Apr 2019 13:31:12 +0000 (21:31 +0800)]
gdc: add trace_mode debug node for gdc timeout issue [1/2]
PD#GH-27
Problem:
gdc timeout when gdc processing data
Solution:
add trace_mode debug node
Verify:
verified on G12B-W400
Change-Id: I85ee5a4203c9da1af755844125716a844da54ad3
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
Hanjie Lin [Mon, 15 Apr 2019 02:14:37 +0000 (10:14 +0800)]
mm: vmap: decrease wrps num [1/1]
PD#SWPL-6813
Problem:
sys_ptrace watchpoint can't stop
Solution:
decrease wrps num
Verify:
u212
Change-Id: I18947bd91f8dd07cedeebbfca6d7ce01107c6a3e
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Zongdong Jiao [Fri, 12 Apr 2019 08:58:08 +0000 (16:58 +0800)]
hdmitx: fix wrong 420 valid_mode [1/1]
PD#SWPL-6896
Problem:
In the HF1-31 Iter 03 test, the Rx EDID's max tmds clock is 600MHz,
and it doesn't claim that it supports Y420 modes. But
echo 2160p60hz,420,8bit > /sys/class/amhdmitx/amhdmitx0/valid_mode
'cat valid_mode' will get 1.
Solution:
Add Y420 8bit check
Verify:
G12/U212
Change-Id: I0a128eb33aeb2b4bcbf253eff49e9c5186386af1
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Jianxin Pan [Mon, 15 Apr 2019 06:49:41 +0000 (23:49 -0700)]
Merge "dts: debug: enable ftrace_ramoops for new tm2 dts [1/1]" into amlogic-4.9-dev
Bencheng Jing [Mon, 18 Mar 2019 11:08:54 +0000 (19:08 +0800)]
amvecm: add sharpness0 cvbs table in driver [1/2]
PD#OTT-2339
Problem:
Testing CVBS Video Index Part FAIL
Solution:
add sharpness0 cvbs table in driver
Verify:
U212
Change-Id: I91047de0e852c77e70ad95aad3e6830fde7097f4
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Jianxin Pan [Mon, 15 Apr 2019 06:28:50 +0000 (14:28 +0800)]
dts: debug: enable ftrace_ramoops for new tm2 dts [1/1]
PD#SWPL-6028
Problem:
enable ftrce in ramoops for new tm2 dtbs
Solution:
enable ftrce in ramoops for new tm2 dtbs
Verify:
verified ok
Change-Id: Ia7ee3b11784a69ef7d6b7671f9ad75c14ae477f7
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Blance Tang [Mon, 15 Apr 2019 06:20:39 +0000 (14:20 +0800)]
buildroot: Add missed amlogic-dt-id in U211 DTS file [1/1]
PD#SWPL-7177
Problem:
Missing amlogic-dt-id in U211 DTS file
Solution:
Add back amlogic-dt-id to U211 DTS file
Verify:
Local
Change-Id: I6ef3243bfa3323e7eec5f8044e0b0fe2271fcfa0
Signed-off-by: Blance Tang <guofeng.tang@amlogic.com>
Yong Qin [Mon, 8 Apr 2019 06:24:11 +0000 (14:24 +0800)]
vlock: add phase lock pll mode [1/1]
PD#SWPL-6899
Problem:
enable vlock phase lock function in pll mode
Solution:
1.when phase lock on, and when phase lock flag not assert
disable ss.
2.after phase lock flag assert, restore ss
Verify:
tl1
Change-Id: I2f9f6ec76468b1043c1b7ec99b2daa4f9d69ae60
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Shuide Chen [Thu, 11 Apr 2019 05:20:46 +0000 (13:20 +0800)]
osd: fix osd afbc can't display on android5.1 [1/1]
PD#SWPL-6869
Problem:
afbc can't display with android5.1, because blank enable
called before afbc set, which make osd enable not updated
and afbc not enable when hwc post frame
Solution:
if mali afbc enable, call osd enable.
Verify:
verified on x301
Change-Id: I1d727a586a66c6e7848d09dfb5c5b74ff7a2e3e6
Signed-off-by: Shuide Chen <shuide.chen@amlogic.com>
Liang Ji [Fri, 12 Apr 2019 11:05:39 +0000 (19:05 +0800)]
partition: change vendor size [1/2]
PD#SWPL-6586
Problem:
Android P trunk can not compile 64bit kernel
Android P vendor size is not enough,
64bit kernel and isp so etc ,
the size exceeds 256M
Solution:
change vendor size from 256M into 320M
Verify:
galilei
Change-Id: Icc7b3d7c8d56f5c361acf9722bba6422b8dc3af2
Signed-off-by: Liang Ji <liang.ji@amlogic.com>
Jianxin Pan [Mon, 15 Apr 2019 03:15:01 +0000 (11:15 +0800)]
Merge branch 'bringup/amlogic-4.9/tm2_20190411' into amlogic-4.9-dev
Change-Id: I0ad3498184e9401257bf910492a92f85b9b6cb8d
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Hong Guo [Mon, 15 Apr 2019 02:39:47 +0000 (10:39 +0800)]
cpufreq: delete dts for dynamic adjustment dsu clk [1/1]
PD#SWPL-2842
Problem:
delete dts for dynamic adjustment dsu clk.
Solution:
delete dts for dynamic adjustment dsu clk.
Verify:
tl1_x301, verify pass
Change-Id: I8e49f2bc290a459962c5befe606c6511d954b6fa
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Yi Zhou [Fri, 12 Apr 2019 13:04:03 +0000 (21:04 +0800)]
dv: add polling interface for systemcontrol [1/1]
PD#SWPL-6338
Problem:
add polling interface for systemcontrol
Solution:
add polling interface for systemcontrol
Verify:
tm2
Change-Id: I1a0a9a3028592ee0df77b33c9c617cbdd9b07d70
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Zhe Wang [Fri, 12 Apr 2019 09:54:48 +0000 (17:54 +0800)]
audio: TM2: bringup AMP ti5805 on ab301 [1/1]
PD#SWPL-7074
Problem:
speaker doesn't work
Solution:
bringup AMP ti5805 on ab301
Verify:
Verified on T962x3_ab301
Change-Id: Icb27691b4fd5a1e54070c4a6d3d3c68cdf3a60b7
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Lei Yang [Sun, 7 Apr 2019 09:06:42 +0000 (17:06 +0800)]
hdmirx: add new edid update method [1/1]
PD#SWPL-6792
Problem:
EDID buff change to independent mode for each port
Solution:
1. add new edid update method
2. fix dv status issue for dv10
Verify:
Verfied on TM2 skt board
Change-Id: I274e5c08168b79fcfab0d2575a6531ab9802af3f
Signed-off-by: Lei Yang <lei.yang@amlogic.com>
Nanxin Qin [Tue, 9 Apr 2019 14:34:05 +0000 (22:34 +0800)]
power: add is_support_pwr_ctrl function. [2/2]
PD#SWPL-5261
Problem:
bringup sm1 and tm2.
Solution:
add is_support_pwr_ctrl function.
Verify:
U212 and AC200
Change-Id: I7f392ea8f23ce6f4e610b98bdcc39c4fcc2e6444
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
Yi Zhou [Thu, 11 Apr 2019 07:03:06 +0000 (15:03 +0800)]
dv: fix error color when playing dv films with EL under tm2 platform [1/1]
PD#SWPL-6338
Problem:
error color when playing dv films with EL under tm2 platform
Solution:
bypass dv core
Verify:
tm2
Change-Id: I477ea5dbdcf2a0af3783aa62200809f2ed89be5e
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Yong Qin [Wed, 10 Apr 2019 08:37:54 +0000 (16:37 +0800)]
cec: cec bringup for tm2 [1/1]
PD#SWPL-6945
Problem:
bringup for tm2
Solution:
add chip support and modify dts
Verify:
tm2
Change-Id: I718c3b81912a3555e19866f96d392bfb09d27384
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
cancan.chang [Fri, 12 Apr 2019 05:03:45 +0000 (13:03 +0800)]
NNA: add NNA support on tm2 [1/1]
PD#SWPL-5623
Problem:
tm2 not support NNA now.
Solution:
add NNA support.
Verify:
Verified on tm2_ab319
Change-Id: Ib41544d0ebeb3f25442692ac3365ad3a5fc5d4ab
Signed-off-by: Cancan Chang <cancan.chang@amlogic.com>
xiaoliang.wang [Thu, 4 Apr 2019 02:29:23 +0000 (10:29 +0800)]
device: changes for s905x3 ac213 bring up [3/3]
PD#SWPL-6970
Problem:
for s905x3 ac213 bring up, support multi-dts
Solution:
s905x3 ac213 bring up
Verify:
AC213
Change-Id: I4a22f4ce5b927db7d0197028abb12e6b669e7dc8
Signed-off-by: xiaoliang.wang <xiaoliang.wang@amlogic.com>
zhiwei.yuan [Fri, 1 Mar 2019 06:47:01 +0000 (14:47 +0800)]
di: pd22 FW parameters need optimize [1/1]
PD#SWPL-5046
Problem:
PD22 para is incorrect
Solution:
correct the parameters
Verify:
verified by t962x2_x301
Change-Id: I0b26914694dd19f9b06cb37c50f7589a200ea0b1
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
MingLiang Dong [Wed, 20 Feb 2019 07:15:44 +0000 (02:15 -0500)]
di: disable deghost refresh according to motion [1/1]
PD#SWPL-6423
Problem:
deghost refresh according to motion
Solution:
disable deghost refresh according to motion
Verify:
verify on TL1
Change-Id: Ic3647462e5f5686f6cc182c30797752ea72c013c
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Wenfeng Guo [Thu, 10 Jan 2019 08:19:58 +0000 (16:19 +0800)]
deinterlace: fix tl1 in 1080i has small sawtooth [1/1]
PD#SWPL-4072
Problem:
tl1 1080i in some dark scenes and roller coasters
have small sawtooth
Solution:
adjust a set of registers with special motion
Verify:
tl1
Change-Id: Idbe62e823f1c6c683b67d000978de1862c8e3162
Signed-off-by: Wenfeng Guo <wenfeng.guo@amlogic.com>
Yong Qin [Thu, 11 Apr 2019 06:06:56 +0000 (14:06 +0800)]
Revert "di: change clkb frq from 500 to 667 [1/1]"
This reverts commit
c75a783c4278f4b8c97dedadc72f44d49461dc4f.
Change-Id: I2bf82f1ceeebc1377d45b76ee1d2563811c154ca
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Yingyuan Zhu [Wed, 10 Apr 2019 09:27:24 +0000 (17:27 +0800)]
AC200: fix home button has no function [1/1]
PD#SWPL-6694
Problem:
home button has no function in sm1-ac200
Solution:
add home button configuration in dst node
Verify:
test pass on sm1-ac200
Change-Id: I670480c6dfd7f833e737adaddbe5981d84091203
Signed-off-by: Yingyuan Zhu <yingyuan.zhu@amlogic.com>
Zhe Wang [Fri, 12 Apr 2019 02:51:00 +0000 (10:51 +0800)]
audio: fixed kernel panic when resample is disabled [1/1]
PD#SWPL-7039
Problem:
Kernel Panic when resample A is disabled
Solution:
When resample is disabled，don't init resample
Verify:
Verified on T962e2_ab311
Change-Id: Id9552ffc6be40f133b828dbded4ad3f15d177ab0
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Jian Cao [Fri, 12 Apr 2019 02:34:25 +0000 (10:34 +0800)]
osd: frame just display on half screen [1/1]
PD#SWPL-7039
Problem:
bring up osd for TM2
frame just display on half screen
Solution:
fix field_out_en value from array
Verify:
Verified on T962e2_ab319
Change-Id: Id07f3d813242f031125fcac11d3fa05205895448
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
xiaoliang.wang [Thu, 4 Apr 2019 02:29:23 +0000 (10:29 +0800)]
device: changes for s905x3 ac213 bring up [3/3]
PD#SWPL-6970
Problem:
for s905x3 ac213 bring up, support multi-dts
Solution:
s905x3 ac213 bring up
Verify:
AC213
Change-Id: I4a22f4ce5b927db7d0197028abb12e6b669e7dc8
Signed-off-by: xiaoliang.wang <xiaoliang.wang@amlogic.com>
Zhe Wang [Fri, 5 Apr 2019 06:42:48 +0000 (14:42 +0800)]
audio: TM2 audio basic function bringup [1/1]
PD#SWPL-6721
Problem:
TM2 bringup
Solution:
audio basic function bringup
Verify:
Verified on T962e2_ab311
Change-Id: Ic48ded3964ea87e40c4d683d71a50bbdc1975f91
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
zhiwei.yuan [Thu, 4 Apr 2019 08:06:32 +0000 (16:06 +0800)]
dtv_demod: TM2:DTV search channel [1/1]
PD#SWPL-6912
Problem:
tm2 bringup
Solution:
verify basic function
Verify:
verified by tm2_t962e2_ab311
Change-Id: Icdd38ca191923be130003b82c6434b106caa8194
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Hong Guo [Tue, 9 Apr 2019 06:11:02 +0000 (14:11 +0800)]
CPUFREQ: add cpufreq function for tm2 [1/1]
PD#SWPL-6732
Problem:
add cpufreq function for tm2.
Solution:
add cpufreq function for tm2.
Verify:
test passed on tm2_t962x3_ab301.dts
Change-Id: I33755d84fe14257e8e35440d2767b075d0c5890e
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Yi Zhou [Thu, 14 Mar 2019 08:05:59 +0000 (16:05 +0800)]
dv: add tm2 interface [1/1]
PD#SWPL-6338
Problem:
need to add dv interface in tm2
Solution:
choose dv in UI and play films, observe the video and
graphic
Verify:
ab301 verify ok
Change-Id: I5d85b195254a16bcc9046d258728bd41d8a809d5
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Yong Qin [Mon, 1 Apr 2019 07:45:36 +0000 (15:45 +0800)]
vlock: bring up for tm2 [1/1]
PD#SWPL-6576
Problem:
bringup for tm2
Solution:
add some chip id for match tm2
Verify:
tm2
Change-Id: I857ec687b7888782efb8875f8edee538dd615947
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
kieth liu [Mon, 8 Apr 2019 11:38:19 +0000 (07:38 -0400)]
t962x3_ab301: modify dts for WIFI/BT/tuner [1/1]
PD#SWPL-6720
Problem:
WIFI/BT/tuner can not work
Solution:
modify dts for WIFI/BT/tuner
Verify:
verify by t962x3_ab301
Change-Id: I0925a2ebbad2825e4df47cc3957d960cdcab6ac4
Signed-off-by: kieth liu <kieth.liu@amlogic.com>
projects / platform / kernel / linux-amlogic.git / log