Mark Brown [Thu, 23 Jan 2014 12:58:16 +0000 (12:58 +0000)]
ASoC: codecs: Make OF supported CODECs visible in Kconfig
Now that we have a generic card driver we can't rely on the card driver
selecting the CODECs for us so make the CODECs that can be enabled with
OF directly selectable in Kconfig. For the platforms not using OF it's
not clear that we don't still want to have some board specific selection
since the kernel needs to contain code to register the devices; ACPI could
provide this from firmware does not yet support any kind of generic card.
It may also be desirable to hide these if OF is not enabled to reduce
noise.
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit
1291e14175e6b83efe1464f32189acb21bc4be09)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Jean Delvare [Wed, 5 Nov 2014 01:39:21 +0000 (09:39 +0800)]
watchdog: iTCO_wdt: Fix the parent device
The watchdog's parent is iTCO_wdt (the platform device) not lpc_ich
(the PCI device.) Setting the parent right makes it much easier for
the user to figure out which driver/module is handling the watchdog
device node.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
(cherry picked from commit
c90789baa8cec363093c5ec292c989b6f22d8f32)
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Jingoo Han [Wed, 5 Nov 2014 01:39:20 +0000 (09:39 +0800)]
watchdog: fix checkpatch warnings and error
Fix the following checkpatch warnings and error:
WARNING: quoted string split across lines
WARNING: braces {} are not necessary for single statement blocks
WARNING: __initdata should be placed after ibmasr_id_table[]
WARNING: please, no space before tabs
ERROR: do not initialise statics to 0 or NULL
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
(cherry picked from commit
5f5e19093b2fa592720810154f15ffe51aa9277f)
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Peter Tyser [Wed, 5 Nov 2014 01:39:19 +0000 (09:39 +0800)]
watchdog: iTCO_wdt: Add support for v3 silicon
Some new Atom's, eg Avoton and Bay Trail, have slightly different iTCO
functionality:
- The watchdog timer ticks at 1 second instead of .6 seconds
- Some 8 and 16-bit registers were combined into 32-bit registers
- Some registers were removed (DAT_IN, DAT_OUT, MESSAGE)
- The BOOT_STS field in TCO_STS was removed
- The NO_REBOOT bit is in the PMC area instead of GCS
Update the driver to support the above changes and bump the version to
1.11.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Tested-by: Rajat Jain <rajatjain@juniper.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
(cherry picked from commit
24b3a1670b47e75be633ae0b5c07945c446f9d29)
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
James Ralston [Wed, 5 Nov 2014 01:39:18 +0000 (09:39 +0800)]
mfd: lpc_ich: Add Device IDs for Intel 9 Series PCH
This patch adds the LPC Device IDs for the Intel 9 Series PCH.
Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
(cherry picked from commit
fea31042ff613145c7784e2ce454bf3c151b97ba)
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Alan Cox [Wed, 5 Nov 2014 01:39:17 +0000 (09:39 +0800)]
mfd: lpc_ich: Add PCI ID for Intel Braswell
This is the same as used in Baytrail so add the new PCI ID to the driver's
list of supported IDs.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
(cherry picked from commit
ff0c9da013d2c9f1ec232926a54e536ab48c6678)
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Guenter Roeck [Wed, 5 Nov 2014 01:39:16 +0000 (09:39 +0800)]
mfd: lpc_ich: Enable GPIO for Panther Point
Panther Point PCH GPIO configuration is similar to V5 PCHs.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
(cherry picked from commit
62cf2cdb99c7e870ab857bdd617e728790f8c43c)
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Peter Tyser [Wed, 5 Nov 2014 01:39:15 +0000 (09:39 +0800)]
mfd: lpc_ich: Add support for Intel Bay Trail SoC
This patch adds the LPC Controller Device IDs for Watchdog and GPIO for
the Intel Bay Trail Atom SoC.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
(cherry picked from commit
6111ec70357022ccd037399c13f69900431850b4)
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Peter Tyser [Wed, 5 Nov 2014 01:39:14 +0000 (09:39 +0800)]
mfd: lpc_ich: Add support for NM10 GPIO
The NM10's GPIO is compatible with ICH v7 GPIO.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Tested-by: Dan Weinlader <danw@vs-networks.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
(cherry picked from commit
117bbfe25cfc2e968be1f7976ac460a5cd3d734e)
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Peter Tyser [Wed, 5 Nov 2014 01:39:13 +0000 (09:39 +0800)]
mfd: lpc_ich: Change Avoton to iTCO v3
The register layout of the Avoton is compatible with the iTCO v3
register layout.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Tested-by: Rajat Jain <rajatjain@juniper.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
(cherry picked from commit
c48cf59878685cc06b71bb2a3ca17b61103c8de7)
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Peter Tyser [Wed, 5 Nov 2014 01:39:12 +0000 (09:39 +0800)]
mfd: lpc_ich: Add support for iTCO v3
Some newer Atom CPUs, eg Avoton and Bay Trail, use slightly different
register layouts for the iTCO than the current v1 and v2 iTCO.
Differences from previous iTCO versions include:
- The ACPI space is enabled in the "ACPI base address" register instead
of the "ACPI control register"
- The "no reboot" functionality is set in the "Power Management
Configuration" register instead of the "General Control and Status"
(GCS) register or PCI configuration space.
- The "ACPI Control Register" is not present on v3. The "Power
Management Configuration Base Address" register resides at the same
address is Avoton/Bay Trail.
To differentiate these newer chipsets create a new v3 iTCO version and
update the MFD driver to support them.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Tested-by: Rajat Jain <rajatjain@juniper.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
(cherry picked from commit
eb71d4dec4a5e010e34b9d7afdb5af41884c388e)
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Peter Tyser [Wed, 5 Nov 2014 01:39:11 +0000 (09:39 +0800)]
mfd: lpc_ich: Remove lpc_ich_cfg struct use
Future chipsets will use different register layouts that don't map
cleanly to the lpc_ich_cfg fields. Remove the lpc_ich_cfg struct and
add explicit fields to the higher level lpc_ich_priv structure.
This change should have no functional impact.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Tested-by: Rajat Jain <rajatjain@juniper.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
(cherry picked from commit
429b941abd503c8936e116c819362323aafdbd50)
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Peter Tyser [Wed, 5 Nov 2014 01:39:10 +0000 (09:39 +0800)]
mfd: lpc_ich: Only configure watchdog or GPIO when present
Some chipsets don't currently have GPIO support enabled. For these
chipsets don't go through the process of initializing the GPIO region.
Make the same change for the watchdog initialization for chipsets which
may not enable the WDT in the future.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Tested-by: Rajat Jain <rajatjain@juniper.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
(cherry picked from commit
f0776b8ce03ceb638c51b62f324844c71c446600)
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Peter Tyser [Wed, 5 Nov 2014 01:39:09 +0000 (09:39 +0800)]
mfd: lpc_ich: Fix ACPI enable bitmask
The original bitmask of 0x10 was incorrect and would result in a write
to a reserved read-only bit instead of enabling the ACPI I/O
region. Update it to the proper value of 0x80.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Tested-by: Rajat Jain <rajatjain@juniper.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
(cherry picked from commit
f5dccb15877b82a40950c6f752d5345c86189fc9)
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Vincent Donnefort [Wed, 5 Nov 2014 01:39:08 +0000 (09:39 +0800)]
mfd: lpc_ich: Add support for Intel Avoton GPIOs
Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
(cherry picked from commit
facd9939403cb5769190054a600474399e776e3a)
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Vincent Donnefort [Wed, 5 Nov 2014 01:39:07 +0000 (09:39 +0800)]
mfd: lpc_ich: Convert ICH GPIOs IDs to enum
All those IDs are arbitrary and so can be encapsulated into an enumeration.
Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
(cherry picked from commit
6cec365e3eba3dd8c864056d8d3fd9e73ab8dd7a)
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Paul Gortmaker [Wed, 5 Nov 2014 01:39:06 +0000 (09:39 +0800)]
mfd: Delete non-required instances of include <linux/init.h>
None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>. Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
(cherry picked from commit
3c699105d0376c14940ce7cf561754a94cdff8dd)
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Alan Cox [Tue, 4 Nov 2014 08:55:25 +0000 (16:55 +0800)]
i2c: i801: Add PCI ID for Intel Braswell
The SMBus host controller is the same as used in Baytrail so add the new
PCI ID to the driver's list of supported IDs.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
(cherry picked from commit
39e8e30ee544a62c148033d64a979028b958ca05)
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Jean Delvare [Tue, 4 Nov 2014 08:55:24 +0000 (16:55 +0800)]
i2c: i801: Add device ID for Intel Wildcat Point PCH
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
(cherry picked from commit
b299de839157852c563b9f133c8b7e630545a9c3)
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Jean Delvare [Tue, 4 Nov 2014 08:55:23 +0000 (16:55 +0800)]
i2c: i801: Fix the alignment of the device table
A long name broke the alignment, shift the columns a bit to fix it and
make the table look nice again. While we're here, switch to the
standard comment style to make checkpatch happy, and use tabs instead
of spaces for column alignment.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
(cherry picked from commit
ce3161106ab57afbfbe1c33d95bf4a569405983a)
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Jingoo Han [Tue, 4 Nov 2014 08:55:22 +0000 (16:55 +0800)]
i2c: remove DEFINE_PCI_DEVICE_TABLE macro
Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro
is not preferred.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
(cherry picked from commit
392debf11656dedd79da44416747d5b2b1747f5e)
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Julia Lawall [Wed, 29 Oct 2014 00:52:58 +0000 (08:52 +0800)]
pwm: lpss: use c99 initializers in structures
Use c99 initializers for structures.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@decl@
identifier i1,fld;
type T;
field list[n] fs;
@@
struct i1 {
fs
T fld;
...};
@bad@
identifier decl.i1,i2;
expression e;
initializer list[decl.n] is;
@@
struct i1 i2 = { is,
+ .fld = e
- e
,...};
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
[thierry.reding: rebased and applied same fix for Braswell]
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
(cherry picked from commit
b2b7adeb21745266326d453b95e5d0b1b9cb1d4e)
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Thierry Reding [Wed, 29 Oct 2014 00:52:57 +0000 (08:52 +0800)]
pwm: lpss: Fix build failure on PowerPC
An x86 build seems to pull in the linux/io.h include indirectly. On
PowerPC that doesn't happen and the build breaks due to the readl() and
writel() functions not being declared. Fix this by explicitly including
linux/io.h.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
(cherry picked from commit
e0c86a3b63e948e51a47d17382c7cd8711d19750)
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Andy Shevchenko [Wed, 29 Oct 2014 00:52:56 +0000 (08:52 +0800)]
pwm: lpss: Properly split driver to parts
The driver consists of core, PCI, and platform parts. It would be better
to split them into separate files.
The platform driver is now called pwm-lpss-platform. Thus, previously
set CONFIG_PWM_LPSS=m is not enough to build it. But we are on the safe
side since it seems no one from outside Intel is using it for now.
While here, move to use macros module_pci_driver() and
module_platform_driver().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Alan Cox <alan@linux.intel.com>
[thierry.reding: change select to depends on PWM_LPSS, cleanup]
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
(cherry picked from commit
c558e39e14c2372394f49e07fbe94e9708b615cb)
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Alan Cox [Wed, 29 Oct 2014 00:52:55 +0000 (08:52 +0800)]
pwm: lpss: Add ACPI and PCI IDs for Intel Braswell
This is pretty much the same as Baytrail PWM. Only difference is that the
input clock runs on different frequency.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
(cherry picked from commit
373c57829a3f9da1405b1fbd3d17e50f8e1f476e)
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Heikki Krogerus [Wed, 29 Oct 2014 00:52:54 +0000 (08:52 +0800)]
pwm: lpss: remove dependency on clk framework
Unlike other Intel LPSS devices, the PWM does not have the
clock dividers or the gate. All we get from the clock is the
rate. Since PCI case uses the driver data to get the rate,
we can drop the clk and use the same data also in case of
ACPI. The frequency is the same.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Chew, Chiau Ee <chiau.ee.chew@intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
(cherry picked from commit
65accd87381ed96bf8893124b149bae08edd2740)
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Thierry Reding [Wed, 29 Oct 2014 00:52:53 +0000 (08:52 +0800)]
pwm: lpss: Fix const qualifier and sparse warnings
Fixes the following warnings reported by the 0-DAY kernel build testing
backend:
drivers/pwm/pwm-lpss.c: In function 'pwm_lpss_probe_pci':
>> drivers/pwm/pwm-lpss.c:192:2: warning: passing argument 3 of 'pwm_lpss_probe' discards 'const' qualifier from pointer target type [enabled by default]
lpwm = pwm_lpss_probe(&pdev->dev, &pdev->resource[0], info);
^
drivers/pwm/pwm-lpss.c:130:30: note: expected 'struct pwm_lpss_boardinfo *' but argument is of type 'const struct pwm_lpss_boardinfo *'
static struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev,
^
>> drivers/pwm/pwm-lpss.c:143:28: sparse: incorrect type in return expression (different address spaces)
drivers/pwm/pwm-lpss.c:143:28: expected struct pwm_lpss_chip *
drivers/pwm/pwm-lpss.c:143:28: got void [noderef] <asn:2>*regs
>> drivers/pwm/pwm-lpss.c:192:63: sparse: incorrect type in argument 3 (different modifiers)
drivers/pwm/pwm-lpss.c:192:63: expected struct pwm_lpss_boardinfo *info
drivers/pwm/pwm-lpss.c:192:63: got struct pwm_lpss_boardinfo const *[assigned] info
drivers/pwm/pwm-lpss.c: In function 'pwm_lpss_probe_pci':
drivers/pwm/pwm-lpss.c:192:2: warning: passing argument 3 of 'pwm_lpss_probe' discards 'const' qualifier from pointer target type [enabled by default]
lpwm = pwm_lpss_probe(&pdev->dev, &pdev->resource[0], info);
^
drivers/pwm/pwm-lpss.c:130:30: note: expected 'struct pwm_lpss_boardinfo *' but argument is of type 'const struct pwm_lpss_boardinfo *'
static struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev,
^
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
(cherry picked from commit
89c0339e0aa097384b3efed894b23820814c21d3)
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Alan Cox [Wed, 29 Oct 2014 00:52:52 +0000 (08:52 +0800)]
pwm: lpss: Add support for PCI devices
Not all systems enumerate the PWM devices via ACPI. They can also be
exposed via the PCI interface.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
(cherry picked from commit
093e00bb3f82f3c67e2d1682e316fc012bcd0d92)
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Mika Westerberg [Wed, 29 Oct 2014 00:52:51 +0000 (08:52 +0800)]
pwm: add support for Intel Low Power Subsystem PWM
Add support for Intel Low Power I/O subsystem PWM controllers found on
Intel BayTrail SoC.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Chew, Kean Ho <kean.ho.chew@intel.com>
Signed-off-by: Chang, Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
(cherry picked from commit
d16a5aa9e821633a3095d7a88cd1d2cd108bf966)
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Rob Herring [Wed, 2 Apr 2014 04:49:03 +0000 (23:49 -0500)]
of/fdt: update of_get_flat_dt_prop in prep for libfdt
Make of_get_flat_dt_prop arguments compatible with libfdt fdt_getprop
call in preparation to convert FDT code to use libfdt. Make the return
value const and the property length ptr type an int.
Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Grant Likely <grant.likely@linaro.org>
Tested-by: Stephen Chivers <schivers@csc.com>
(cherry picked from commit
9d0c4dfedd96ee54fc075b16d02f82499c8cc3a6)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Conflicts:
arch/arm/plat-samsung/s5p-dev-mfc.c
arch/powerpc/platforms/powernv/opal.c
drivers/of/fdt.c
drivers/of/of_reserved_mem.c
Ben Dooks [Thu, 13 Feb 2014 18:02:49 +0000 (18:02 +0000)]
clk: add clock-indices support
Add a property called clock-indices to allow clock-output-names
to be used where the index used to lookup a clock is not a 1:1
mapping to the array position in the clock-output-names
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
(cherry picked from commit
7a0fc1a3df82d29e00b4c9f88a6b37450d6711f1)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Fri, 5 Sep 2014 23:34:32 +0000 (03:34 +0400)]
i2c: rcar: fix RCAR_IRQ_ACK_{RECV|SEND}
Bits 8-31 of all registers reflect the value of bits 0-7 on reads and should be
0 on writes, according to the manuals. RCAR_IRQ_ACK_{RECV|SEND} macros have all
1's in bits 8-31, thus going against the manuals, so fix them.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: stable@vger.kernel.org
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
(cherry picked from commit
938916fbb8e8cb67eacb784f4eda17e2950c16c5)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Yoshihiro Shimoda [Fri, 22 Aug 2014 11:14:28 +0000 (20:14 +0900)]
usb: renesas_usbhs: fix the usb_pkt_pop()
This patch fixes the usb_pkt_pop(). If a gadget driver calls
usb_ep_dequeue(), this driver will call the usb_pkt_pop().
So, the usb_pkt_pop() should cancel the transaction.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
(cherry picked from commit
2743e7f90dc08282d027dbc2f6486f5cb85aa493)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Yoshihiro Shimoda [Fri, 22 Aug 2014 11:14:10 +0000 (20:14 +0900)]
usb: renesas_usbhs: fix the condition of is_done in usbhsf_dma_push_done
This patch fixes the condition of is_done in usbhsf_dma_push_done().
This function will be called after a transmission finished by DMAC.
So, the function should check if the transmission packet is short packet
or not. Also the function should call try_run to send the zero packet
by the pio handler if the "*is_done" is not set. Otherwize, the
transaction will not finish if a gadget driver sets the "zero" flag
in a transmission.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
(cherry picked from commit
c0ed8b23b257a84d103764cdbd490ee5e2749da3)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Yoshihiro Shimoda [Fri, 22 Aug 2014 11:14:00 +0000 (20:14 +0900)]
usb: renesas_usbhs: protect mod->irq_{bemp,brdy}sts by spin lock
This patch protects the mod->irq_bempsts and mod->irq_brdysts by
spin lock in the usbhs_status_get_each_irq() because other functions
will write them during spin lock. Otherwise, the driver will clears
the BRDYSTS and/or BEMPSTS wrongly, and then, the transaction will not
finish.
Also since the driver should use the INTSTS0 and BRDYSTS and BEMPSTS
as the same timing, the patch protects them.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
(cherry picked from commit
c4d8199ba1a7aa390b06db23f4532e2c1875aefb)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Yoshihiro Shimoda [Fri, 22 Aug 2014 11:13:50 +0000 (20:13 +0900)]
usb: renesas_usbhs: fix the behavior of some usbhs_pkt_handle
Some gadget drivers will call usb_ep_queue() more than once before
the first queue doesn't finish. However, this driver didn't handle
it correctly. So, this patch fixes the behavior of some
usbhs_pkt_handle using the "running" flag. Otherwise, the oops below
happens if we use g_ncm driver and when the "iperf -u -c host -b 200M"
is running.
Unable to handle kernel NULL pointer dereference at virtual address
00000000
pgd =
c0004000
[
00000000] *pgd=
00000000
Internal error: Oops:
80000007 [#1] SMP ARM
Modules linked in: usb_f_ncm g_ncm libcomposite u_ether
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.17.0-rc1-00008-g8b2be8a-dirty #20
task:
c051c7e0 ti:
c0512000 task.ti:
c0512000
PC is at 0x0
LR is at usbhsf_pkt_handler+0xa8/0x114
pc : [<
00000000>] lr : [<
c0278fb4>] psr:
60000193
sp :
c0513ce8 ip :
c0513c58 fp :
c0513d24
r10:
00000001 r9 :
00000193 r8 :
eebec4a0
r7 :
eebec410 r6 :
eebe0c6c r5 :
00000000 r4 :
ee4a2774
r3 :
00000000 r2 :
ee251e00 r1 :
c0513cf4 r0 :
ee4a2774
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
(cherry picked from commit
8355b2b3082d302091506703d2e4e239f7deed7f)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Bartlomiej Zolnierkiewicz [Mon, 1 Sep 2014 14:25:35 +0000 (16:25 +0200)]
net: sh_eth: fix driver dependencies
Renesas SuperH Ethernet support should be available only on
Renesas ARM SoCs and SuperH architecture.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: Magnus Damm <magnus.damm@gmail.com>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit
f6ec9c335b502d8011971d07508589d212cb3c93)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Lars-Peter Clausen [Sun, 17 Aug 2014 14:18:19 +0000 (16:18 +0200)]
ASoC: rcar: Use && instead of & for boolean expressions
Sparse spits out the following warning:
sound/soc/sh/rcar/gen.c:250:21: warning: dubious: x & !y
It does this because sometimes mixing boolean and bit-wise logic has not the
intended result. In this case we are fine, but replacing the bit-wise '&' with
the boolean '&&' silences the sparse warning. The generated code for both cases
is the same.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit
c8e6e960733f4a5835265c15429fced4d2f1595e)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Sat, 23 Aug 2014 20:44:09 +0000 (00:44 +0400)]
Revert "i2c: rcar: remove spinlock"
This reverts commit
150b8be3cda54412ad7b54f5392b513b25c0aaa7.
The I2C core's per-adapter locks can't protect from IRQs, so the driver still
needs a spinlock to protect the register accesses.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: stable@vger.kernel.org # 3.16+
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
(cherry picked from commit
91bfe2989af02e709ca01ccf518c4fbda3efc70f)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Mon, 1 Sep 2014 21:15:26 +0000 (01:15 +0400)]
i2c: rcar: fix MNR interrupt handling
Sometimes the MNR and MST interrupts happen simultaneously (stop automatically
follows NACK, according to the manuals) and in such case the ID_NACK flag isn't
set since the MST interrupt handling precedes MNR and all interrupts are cleared
and disabled then, so that MNR interrupt is never noticed -- this causes NACK'ed
transfers to be falsely reported as successful. Exchanging MNR and MST handlers
fixes this issue, however the MNR bit somehow gets set again even after being
explicitly cleared, so I decided to completely suppress handling of all disabled
interrupts (which is a good thing anyway)...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: stable@vger.kernel.org
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
(cherry picked from commit
dd318b0df27c582ac0d72a346fd6e693700be23c)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kiran Padwal [Mon, 28 Jul 2014 06:11:04 +0000 (11:41 +0530)]
ASoC: ak4642: Make of_device_id array const
Make of_device_id array const, because all OF functions handle it as const
Signed-off-by: Kiran Padwal <kiran.padwal21@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit
27204ca8b981160c3b65cdc226c9070f76cbbd36)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Yoshihiro Shimoda [Wed, 9 Jul 2014 01:08:52 +0000 (10:08 +0900)]
usb: host: xhci-plat: add support for the R-Car H2 and M2 xHCI controllers
The R-Car H2 and M2 SoCs come with an xHCI controller that requires
some specific initializations related to the firmware downloading and
some specific registers. This patch adds the support for this special
configuration as an xHCI quirk executed during probe and start.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: "mathias.nyman@intel.com" <mathias.nyman@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit
4ac8918f3a737c21d81e250e4194c12ea2b7eb04)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Himangi Saraogi [Fri, 20 Jun 2014 17:41:23 +0000 (23:11 +0530)]
usb: host: xhci-plat: use devm_functions
This patch introduces the use of managed interface devm_ioremap_resource
for ioremap_nocache and request_mem_region and removes the corresponding
free functions in the probe and remove functions.
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Cc: Mathias Nyman <mathias.nyman@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit
fd666348c51f6ab66410c98a149e0418b9a258f0)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Pratyush Anand [Fri, 4 Jul 2014 14:01:25 +0000 (17:01 +0300)]
xhci: Platform: Set xhci lpm support quirk based on platform data
If an xhci platform supports USB3 LPM capability then enable
XHCI_LPM_SUPPORT quirk flag.
Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit
20f6fdd01c2c0de9cc1109083222edded24c5350)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Pratyush Anand [Fri, 4 Jul 2014 14:01:24 +0000 (17:01 +0300)]
xhci: Platform: Add (en/dis)able_usb3_lpm_timeout
To use auto U0-U1/U2 transition by xhci platform device add
(en/dis)able_usb3_lpm_timeout function to the xhci_plat_xhci_driver struct.
Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Tested-by: Aymen Bouattay <aymen.bouattay@st.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit
94ef3d50426240a5402688e8d43a079df5ae21be)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Thu, 14 Aug 2014 22:19:10 +0000 (07:19 +0900)]
ARM: shmobile: koelsch: Remove non-existent i2c6 pinmux
On r8a7791, i2c6 (aka iic3) doesn't need pinmux, but the koelsch dts
refers to non-existent pinmux configuration data:
pinmux core: sh-pfc does not support function i2c6
sh-pfc
e6060000.pfc: invalid function i2c6 in map table
Remove it to fix this.
Fixes: commit
1d41f36a68c0f4e9b01d563ce33bab5201858b54 ("ARM: shmobile:
koelsch dts: Add VDD MPU regulator for DVFS")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Olof Johansson <olof@lixom.net>
(cherry picked from commit
12266db732ff3845eaa9ba9354c4938249787aaf)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Wed, 6 Aug 2014 01:24:51 +0000 (18:24 -0700)]
ARM: shmobile: r8a7791: add missing 0x0100 for SDCKCR
4bfb358b1d6cdeff8c6a13677f01ed78e9696b98
(ARM: shmobile: Add r8a7791 legacy SDHI clocks)
added r8a7791 SDHI clock support.
But, it is missing
"0x0100: x 1/8" division ratio.
This patch fixes hidden bug.
It is based on R-Car H2 v0.7, R-Car M2 v0.9.
Reported-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
58b80ad6472c0fa12926dfa1f9103d3a326bdf18)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Wed, 6 Aug 2014 01:24:30 +0000 (18:24 -0700)]
ARM: shmobile: r8a7790: add missing 0x0100 for SDCKCR
9f13ee6f83c52065112d3e396e42e3780911ef53
(ARM: shmobile: r8a7790: add div4 clocks)
added r8a7790 DIV4 clock support.
But, it is missing
"0x0100: x 1/8" division ratio.
This patch fixes hidden bug.
It is based on R-Car H2 v0.7, R-Car M2 v0.9.
Reported-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
4fb12fe9c34928c1d2bed817e144aec3f44540e9)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 16 Jul 2014 12:02:56 +0000 (14:02 +0200)]
ARM: shmobile: defconfig: Remove MACH_GENMAI
The CONFIG_MACH_GENMAI is scheduled for removal so remove it from
shmobile_defconfig.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[horms+renesas@verge.net.au: revised changelog for updated commit order]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
92db2b7af591d3c3212183a34856b4cb190b6999)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Wed, 16 Jul 2014 00:11:21 +0000 (09:11 +0900)]
ARM: shmobile: sh73a0: Remove spurious 0x from SCIFB clock name
A stray '0x' crept into
a0f7e7496d56ac2d ("ARM: shmobile: sh73a0: add CMT1
clock support for DT"). This patch removes it.
This change should not have any run-time affect at this time as
the clock in question is used by a SCIF device that is not enabled by
default.
Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
2c3758b01aa6f11382d2b018614b5d48ecf30350)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Tue, 15 Jul 2014 07:29:24 +0000 (16:29 +0900)]
ARM: shmobile: genmai: remove defconfig
The genmai board code is scheduled for removal and once
that occurs the defconfig will be of no use. Remove it.
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
3ed27bd90d6d0c8b4d686a2468b6d50cc1ef74e4)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:53 +0000 (09:54 +0200)]
ARM: shmobile: sh73a0: add CMT1 clock support for DT
This will be used when initialising CMT1 device using DT
until common clock framework support is added.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
a0f7e7496d56ac2da7c684e2035815318c17973a)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:46 +0000 (09:54 +0200)]
ARM: shmobile: r8a7740: add CMT1 clock support for DT
This will be used when initialising CMT1 device using DT
until common clock framework support is added.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
2e11179da78a56c2a44fc3fe097f2af8dc18f9d6)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:35 +0000 (09:54 +0200)]
ARM: shmobile: r8a73a4: add CMT1 clock support for DT
This will be used when initialising CMT1 device using DT
until common clock framework support is added.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
aad64dc31954dbbb84cd8fcfaf1bc028f3bc2616)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:43 +0000 (09:54 +0200)]
ARM: shmobile: r8a7740: add TMU clock support for DT
This will be used when initialising TMU devices using DT
until common clock framework support is added.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
ef9cb75ca70c8d31b2493d1fd6cbf8b3dd1dec95)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:29 +0000 (09:54 +0200)]
ARM: shmobile: r8a7778: add TMU clock support for DT
This will be used when initialising TMU devices using DT
until common clock framework support is added.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
0985f38d1379291c8701572e761c809f0d5f6476)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:52 +0000 (09:54 +0200)]
ARM: shmobile: kzm9g-reference: Initialise SCIF device using DT
Initialise SCIF device using DT when booting armadillo800eva
using DT reference.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
700ce7c2bb2a4963472d95eba1436d6b0945918e)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:51 +0000 (09:54 +0200)]
ARM: shmobile: sh73a0: Add SCIF nodes
This describes all of the SCIF hardware of the sh73a0.
Each node is disabled and may be enabled as necessary
by board DTS files.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
2131421b85c9f25082a2b0ec371c7ad0c47cc943)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:42 +0000 (09:54 +0200)]
ARM: shmobile: armadillo800eva-reference: Initialise SCIF device using DT
Initialise SCIF device using DT when booting armadillo800eva
using DT reference.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
c4fac6f2f92331fa5788811357f8b8c3352e5ad8)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:41 +0000 (09:54 +0200)]
ARM: shmobile: r8a7740: Add SCIF nodes
This describes all of the SCIF hardware of the r8a7740.
Each node is disabled and may be enabled as necessary
by board DTS files.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
fa12355b24a430729f34c349473b9c0a3d125679)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:34 +0000 (09:54 +0200)]
ARM: shmobile: ape6evm-reference: Initialise SCIF device using DT
Initialise SCIF device using DT when booting ape6evm
using DT reference.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
27bc82353a3f214a383d7f3b1ccaefdb70d6c94f)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:33 +0000 (09:54 +0200)]
ARM: shmobile: r8a73a4: Add SCIF nodes
This describes all of the SCIF hardware of the r8a73a4.
Each node is disabled and may be enabled as necessary
by board DTS files.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
94f1a03db6988c64601dc84eaf6c8ef1b956d9e7)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:28 +0000 (09:54 +0200)]
ARM: shmobile: bockw-reference: Initialise SCIF device using DT
Initialise SCIF device using DT when booting bockw
using DT reference.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
5be97ca4a4f6e11c4a839ec3c08dea25589dfeb4)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:27 +0000 (09:54 +0200)]
ARM: shmobile: r8a7778: Add SCIF nodes
This describes all of the SCIF hardware of the r8a7778.
Each node is disabled and may be enabled as necessary
by board DTS files.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
9930dc8ee1f59271a54ed4b4922c9c944625a8d6)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:50 +0000 (09:54 +0200)]
ARM: shmobile: sh73a0: add SCI clock support for DT
This will be used when initialising SCI devices using DT
until common clock framework support is added.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
ff4ce48e1f163d945c037c1c90ce12950961d91d)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:40 +0000 (09:54 +0200)]
ARM: shmobile: r8a7740: correct SCI clock support for DT
When initialising SCI devices their names will be .serial
not .sci.
This will be used when initialising SCI devices using DT
until common clock framework support is added.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
d1ec90f2875471df2c954f7cbd45b2389ff86aa2)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:32 +0000 (09:54 +0200)]
ARM: shmobile: r8a73a4: add SCI clock support for DT
This will be used when initialising SCI devices using DT
until common clock framework support is added.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
9947efaac0545fd833b0ff5147578aba79d297bc)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:26 +0000 (09:54 +0200)]
ARM: shmobile: r8a7778: add SCI clock support for DT
This will be used when initialising SCI devices using DT
until common clock framework support is added.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
7a0c99478dca80f862912be02bf8ec240a9098d1)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Wolfram Sang [Thu, 10 Jul 2014 10:50:56 +0000 (12:50 +0200)]
ARM: shmobile: r8a7790: lager: use iic cores instead of i2c
On Lager board, i2c and iic cores can be interchanged since they can be
muxed to the same wires. Commit
e489c2a9bc82713167d9f721ca764f4b0d37e543
("ARM: shmobile: lager: enable i2c devices") activated the i2c cores,
yet the iic cores should be default since they have the more interesting
features for generic use cases, i.e. SMBUS_QUICK and DMA (yet to be
supported).
Reported-by: Khiem Nguyen <khiem.nguyen.xt@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
cb9a2b12e0cb524022c9a81d8ed29f2453ec240d)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Khiem Nguyen [Fri, 4 Jul 2014 00:19:51 +0000 (09:19 +0900)]
ARM: shmobile: Lager: Correct I2C bus for VDD MPU regulator
I2C bus for VDD MPU regulator is IIC3, not I2C3.
Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@renesas.com>
Reviewed-by: Wolfram Sang <wsa@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
5179ffd099446e65a1e094b9cb17cc7edab45583)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Gaku Inami [Wed, 25 Jun 2014 07:58:40 +0000 (16:58 +0900)]
ARM: shmobile: Remove opps table check for cpufreq
This patch is based on feedback from Viresh Kumar.
Since cpufreq-cpu0 driver has already check opp table, there is no
need to same check in mach-shmobile.
Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
e423d12cbcb9576785e891617888f627f1f57bf4)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 13:23:52 +0000 (15:23 +0200)]
ARM: shmobile: Enable R-Car Gen 2 PCIe in shmobile_defconfig
The R-Car Gen 2 PCIe driver provides PCIe host support for
Renesas R-Car Gen2 platforms. To increase hardware support enable
the driver in the shmobile_defconfig multiplatform configuration.
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
8cbf869a0a278c4d39e50daa4f4101b394a72a93)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 06:47:37 +0000 (08:47 +0200)]
ARM: shmobile: marzen: Consistently use tabs for indentation
Unify white space usage by consistently using tabs for indentation.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
08af64097d4c5cb17f9df4dadf80ed5f508db743)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 06:50:09 +0000 (08:50 +0200)]
ARM: shmobile: kzm9g-reference: Remove early_printk from command line
As early printk is not supported when devices are initialised
using DT, so remove it from the command line.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
0b7324706ea24489a0ddcbd9d472e232520aad80)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 06:50:08 +0000 (08:50 +0200)]
ARM: shmobile: armadillo800eva-reference: Remove early_printk from command line
As early printk is not supported when devices are initialised
using DT, so remove it from the command line.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
b2386fa51696ffcae82f27ebbdc667b037be5048)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 06:47:38 +0000 (08:47 +0200)]
ARM: shmobile: r8a7779: Consistently use tabs for indentation
Unify white space usage by consistently using tabs for indentation.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
cc703a59c0f8769456a7eb0d53a8d709e5c19387)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 06:47:36 +0000 (08:47 +0200)]
ARM: shmobile: henninger: Consistently use tabs for indentation
Unify white space usage by consistently using tabs for indentation.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
eb0f12e24f357f1663b4da8c571214d5a11eb011)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Tue, 24 Jun 2014 18:13:38 +0000 (22:13 +0400)]
ARM: shmobile: henninger: enable internal PCI
Enable internal AHB-PCI bridges for the USB EHCI/OHCI controllers attached to
them.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
[horms+renesas@verge.net.au: minor witespace changes]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
83ccfa8d0c6a734720ed8cd23b97256ffcae156a)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Tue, 24 Jun 2014 18:11:44 +0000 (22:11 +0400)]
ARM: shmobile: koelsch: enable internal PCI
Enable internal AHB-PCI bridges for the USB EHCI/OHCI controllers attached to
them.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
[horms+renesas@verge.net.au: minor witespace changes]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
7540aeb0dd2c830ed490e7227d51bc3050ac798c)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Tue, 24 Jun 2014 18:10:05 +0000 (22:10 +0400)]
ARM: shmobile: r8a7791: add internal PCI bridge nodes
Add device nodes for the R8A7791 internal PCI bridge devices.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
[horms+renesas@verge.net.au: minor witespace changes]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
aace0809e9bbbfe1570a298a3284d9802fbf2d1a)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Arnd Bergmann [Thu, 3 Jul 2014 14:08:30 +0000 (16:08 +0200)]
ARM: shmobile: fix shmobile_smp_apmu_suspend_init build failure for !SUSPEND
Patch
d6d757c9a4e ("ARM: shmobile: APMU: Add Core-Standby-state for
Suspend to RAM") added both an inline wrapper for shmobile_smp_apmu_suspend_init
and an empty function in arch/arm/mach-shmobile/platsmp-apmu.c. We get a
build failure when both are present, so this patch removes the one in the .c
file and keeps the inline version.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
d358c99838f3cf63ad7536124be4318cc84b11fa)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Thu, 3 Jul 2014 12:02:45 +0000 (14:02 +0200)]
ARM: shmobile: genmai reference dts: Add RSPI node
Add SPI device for RSPI on Genmai.
On this board, only rspi4 is in use. Its bus contains a single device
(a wm8978 audio codec), for which no bindings are defined yet.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
ae6b61840bfa36d4f1d89703a312ce29a52c3a76)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Mon, 30 Jun 2014 09:49:53 +0000 (11:49 +0200)]
ARM: shmobile: r8a7790: Fix whitespace errors in pci nodes
Remove spaces in between tabs.
Introduced by commit
ff4f3eb8b3386208944fe60b85e6cba4d338198e ("ARM:
shmobile: r8a7790: add internal PCI bridge nodes").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
517ec80a3321e01fd07eeb6098c3d7b455fcca68)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Mon, 23 Jun 2014 00:55:18 +0000 (17:55 -0700)]
ASoC: fsi: use SNDRV_DMA_TYPE_DEV for sound buffer
Current fsi driver is using SNDRV_DMA_TYPE_CONTINUOUS
for snd_pcm_lib_preallocate_pages_for_all().
But, it came from original dma-sh7760.c,
and no longer needed.
This patch exchange its parameter, and removed
original dma mapping and un-needed
dma_sync_single_xxx() from driver.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit
ffb83e8cb14cace1b08ceb56695b580c808d8a41)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Thu, 26 Jun 2014 00:52:33 +0000 (17:52 -0700)]
ARM: shmobile: r8a7791: add DVC support for sound node on DTSI
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
150c8ad40808189423002ea9fc6a858a3a59e6dc)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Thu, 26 Jun 2014 00:52:17 +0000 (17:52 -0700)]
ARM: shmobile: r8a7790: add DVC support for sound node on DTSI
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
334d69a23b177a4ed38e654912444dc48ac46765)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Ben Dooks [Tue, 24 Jun 2014 18:02:21 +0000 (22:02 +0400)]
ARM: shmobile: lager: enable internal PCI
Enable internal AHB-PCI bridges for the USB EHCI/OHCI controllers attached to
them.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Ian Molton <ian.molton@codethink.co.uk>
[Sergei: enabled PCI0]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
d8584660676e00157735abcb34b09d690d96ee16)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Ben Dooks [Tue, 24 Jun 2014 17:59:54 +0000 (21:59 +0400)]
ARM: shmobile: r8a7790: add internal PCI bridge nodes
Add device nodes for the R8A7790 internal PCI bridge devices.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Ian Molton <ian.molton@codethink.co.uk>
[Sergei: added several properties to the PCI bridge nodes]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
ff4f3eb8b3386208944fe60b85e6cba4d338198e)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Fri, 6 Jun 2014 07:21:19 +0000 (16:21 +0900)]
ARM: shmobile: Allow r8a7791 to build non-SMP APMU code
Build the APMU for r8a7791 even though SMP is
disabled in the kernel config. Also initialize
Suspend-to-RAM from pm-r8a7791.c to in the future
cover both UP and SMP use cases of the APMU.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
bfe4cfa8ae21628267f2b879b4396ee17ea4fd3a)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Fri, 6 Jun 2014 07:21:11 +0000 (16:21 +0900)]
ARM: shmobile: Move r8a7791 reset code to pm-r8a7791.c
Move r8a7791 specific reset vector setup code from the
SMP glue code to PM code. This makes the code one step
closer to allow PM operations such as Suspend-to-RAM
in the case when SMP is disabled in the kernel config.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
[horms+renesas@verge.net.au: updated for recent header file changes]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
8e26118d44c4877fa52dc8117692f3cc9af3c769)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Fri, 6 Jun 2014 07:21:03 +0000 (16:21 +0900)]
ARM: shmobile: Allow r8a7790 to build non-SMP APMU code
Build the APMU for r8a7790 even though SMP is
disabled in the kernel config. Also initialize
Suspend-to-RAM from pm-r8a7790.c to in the future
cover both UP and SMP use cases of the APMU.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
06f2c5dcc24b026872bfc9b50b47c384638d2111)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Fri, 6 Jun 2014 07:20:54 +0000 (16:20 +0900)]
ARM: shmobile: Move r8a7790 reset code to pm-r8a7790.c
Move r8a7790 specific reset vector setup code from the
SMP glue code to PM code. This makes the code one step
closer to allow PM operations such as Suspend-to-RAM
in the case when SMP is disabled in the kernel config.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
[horms+renesas@verge.net.au: updated for recent #include changes]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
07ce9dfaf477e0d16d40faea251898d5a38d8051)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Conflicts:
arch/arm/mach-shmobile/pm-r8a7790.c
Magnus Damm [Fri, 6 Jun 2014 07:20:46 +0000 (16:20 +0900)]
ARM: shmobile: Use __init for APMU suspend init function
The function shmobile_smp_apmu_suspend_init() should
be put into the init section to not trigger section
mismatch warnings.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
0d77c9aa7a13a9fcfc93836188474f43394ea657)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Fri, 6 Jun 2014 07:20:18 +0000 (16:20 +0900)]
ARM: shmobile: Adjust APMU code to build for non-SMP
Adjust the APMU code to allow build when CONFIG_SMP=n.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
784500be40a0eabcee1e48c70927aea9c9accb1e)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Fri, 6 Jun 2014 07:20:10 +0000 (16:20 +0900)]
ARM: shmobile: Allow use of boot code for non-SMP case
Allow build of platsmp.c and headsmp.S even though
SMP is disabled in the kernel configuration. With
this in place it is possible to share the reset
vector setup code with power management code that
needs to be built even though SMP is disabled.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
8b438bcb9009609a15e5480ab1947acff6fb9005)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 20 Jun 2014 16:53:07 +0000 (18:53 +0200)]
ARM: shmobile: Move r8a7791.h
Change location of r8a7791.h so it can be included as "r8a7791.h"
instead of the old style <mach/r8a7791.h>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
5201b5a792e95e3ecebe74cd3553413a67da09db)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 20 Jun 2014 16:53:05 +0000 (18:53 +0200)]
ARM: shmobile: Move r8a7779.h
Change location of r8a7779.h so it can be included as "r8a7779.h"
instead of the old style <mach/r8a7779.h>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
1b55353c9214788b0d0797a5fd4585af1557a12c)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 20 Jun 2014 16:53:08 +0000 (18:53 +0200)]
ARM: shmobile: Move sh7372.h
Change location of sh7372.h so it can be included as "sh7372.h"
instead of the old style <mach/sh7372.h>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
113522ee3034427472bcb4b8665833719809b31a)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 20 Jun 2014 16:53:09 +0000 (18:53 +0200)]
ARM: shmobile: Move sh73a0.h
Change location of sh73a0.h so it can be included as "sh73a0.h"
instead of the old style <mach/sh73a0.h>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
ded59d6dfc47683d1b810c069ed637e1e60e75fd)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 20 Jun 2014 16:53:06 +0000 (18:53 +0200)]
ARM: shmobile: Move r8a7790.h
Change location of r8a7790.h so it can be included as "r8a7790.h"
instead of the old style <mach/r8a7790.h>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit
fccae89318fda71012f96042dd971a6f9bf0904e)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>