Randy Dunlap [Wed, 26 May 2010 17:08:51 +0000 (14:08 -0300)]
V4L/DVB: media/IR: nec-decoder needs to select BITREV
Fix ir-nec-decoder build: it uses bitrev library code, so
select BITREVERSE in its Kconfig.
ir-nec-decoder.c:(.text+0x1a2517): undefined reference to `byte_rev_table'
ir-nec-decoder.c:(.text+0x1a2526): undefined reference to `byte_rev_table'
ir-nec-decoder.c:(.text+0x1a2530): undefined reference to `byte_rev_table'
ir-nec-decoder.c:(.text+0x1a2539): undefined reference to `byte_rev_table'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dan Carpenter [Wed, 26 May 2010 14:58:10 +0000 (11:58 -0300)]
V4L/DVB: video/saa7134: change dprintk() to i2cdprintk()
The problem is that dprintk() dereferences "dev" which is null here.
The i2cdprintk() uses "ir" so that's OK.
Also Jean Delvare pointed out a typo in the comment so we may as well
fix that.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dan Carpenter [Tue, 25 May 2010 09:21:50 +0000 (06:21 -0300)]
V4L/DVB: video/saa7134: remove duplicate break
The original code had two break statements in a row.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jarod Wilson [Mon, 24 May 2010 15:02:05 +0000 (12:02 -0300)]
V4L/DVB: IR/imon: add auto-config for 0xffdc rf device
Add auto-config support for iMON 2.4G LT RF device, based on
debug output from Giulio Amodeo in Red Hat bugzilla #572288.
Also flips the switch on only setting up the rf associate sysfs
attr only if we think we're looking at an RF device, vs. previously,
setting up the attr for all 0xffdc devices, so its possible (but a bit
unlikely) there's another iMON RF device we'll have to fix up.
Nb: should be applied after "IR/imon: clean up usage of bools", or there
will be a slight contextual mismatch.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jarod Wilson [Mon, 24 May 2010 15:00:31 +0000 (12:00 -0300)]
V4L/DVB: IR/imon: clean up usage of bools
There was a mix of 0/1 and false/true. Pick one convention and stick
with it (I picked false/true).
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dan Carpenter [Sat, 22 May 2010 19:53:27 +0000 (16:53 -0300)]
V4L/DVB: em28xx: remove unneeded null checks
The "dev" variable is used as a list cursor in a list_for_each_entry()
loop and can never be null here so I removed the check.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Huang Weiyi [Sat, 22 May 2010 17:12:06 +0000 (14:12 -0300)]
V4L/DVB: ngene: remove unused #include <linux/version.h>
Remove unused #include <linux/version.h>('s) in
drivers/media/dvb/ngene/ngene-dvb.c
drivers/media/dvb/ngene/ngene-i2c.c
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Randy Dunlap [Thu, 20 May 2010 21:08:23 +0000 (18:08 -0300)]
V4L/DVB: ak881x needs slab.h
Add slab.h to fix ak881x build:
drivers/media/video/ak881x.c:265:error: implicit declaration of function 'kzalloc'
drivers/media/video/ak881x.c:265:warning: assignment makes pointer from integer without a cast
drivers/media/video/ak881x.c:283:error: implicit declaration of function 'kfree'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean Delvare [Wed, 26 May 2010 13:05:11 +0000 (10:05 -0300)]
V4L/DVB: FusionHDTV: Use quick reads for I2C IR device probing
IR support on FusionHDTV cards is broken since kernel 2.6.31. One side
effect of the switch to the standard binding model for IR I2C devices
was to let i2c-core do the probing instead of the ir-kbd-i2c driver.
There is a slight difference between the two probe methods: i2c-core
uses 0-byte writes, while the ir-kbd-i2c was using 0-byte reads. As
some IR I2C devices only support reads, the new probe method fails to
detect them.
For now, revert to letting the driver do the probe, using 0-byte
reads. In the future, i2c-core will be extended to let callers of
i2c_new_probed_device() provide a custom probing function.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: "Timothy D. Lenz" <tlenz@vorgon.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hermann Gausterer [Tue, 18 May 2010 07:26:17 +0000 (04:26 -0300)]
V4L/DVB: Technotrend S2-3200 ships with a TT 1500 remote
The Technotrend Budget S2-3200 ships with the
Technotrend 1500 bundled remote which is already supported.
Just add the right Subsystem Device ID.
Signed-off-by: Hermann Gausterer <git-kernel-2010@mrq1.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Julia Lawall [Thu, 13 May 2010 19:59:15 +0000 (16:59 -0300)]
V4L/DVB: drivers/media: Use kzalloc
Use kzalloc rather than the combination of kmalloc and memset.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,size,flags;
statement S;
@@
-x = kmalloc(size,flags);
+x = kzalloc(size,flags);
if (x == NULL) S
-memset(x, 0, size);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Ben Hutchings [Sat, 15 May 2010 16:46:16 +0000 (13:46 -0300)]
V4L/DVB: m920x: Select simple tuner
Update the Kconfig selections to match the code.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Ben Hutchings [Sat, 15 May 2010 16:45:58 +0000 (13:45 -0300)]
V4L/DVB: dib0700: Select dib0090 frontend
Update the Kconfig selections to match the code.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Ben Hutchings [Sat, 15 May 2010 16:45:37 +0000 (13:45 -0300)]
V4L/DVB: budget: Select correct frontends
Update the Kconfig selections to match the code.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Ben Hutchings [Sat, 15 May 2010 16:45:21 +0000 (13:45 -0300)]
V4L/DVB: dw2102: Select tda10023 frontend, not tda10021
Update the Kconfig selections to match the code.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Randy Dunlap [Fri, 14 May 2010 17:09:57 +0000 (14:09 -0300)]
V4L/DVB: [-next] IR: fix ir-nec-decoder build, select BITREVERSE
Fix ir-nec-decoder build: it uses bitrev library code, so
select BITREVERSE in its Kconfig.
ir-nec-decoder.c:(.text+0x1a2517): undefined reference to `byte_rev_table'
ir-nec-decoder.c:(.text+0x1a2526): undefined reference to `byte_rev_table'
ir-nec-decoder.c:(.text+0x1a2530): undefined reference to `byte_rev_table'
ir-nec-decoder.c:(.text+0x1a2539): undefined reference to `byte_rev_table'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Prarit Bhargava [Wed, 12 May 2010 22:30:02 +0000 (19:30 -0300)]
V4L/DVB: Add notification to cxusb_dualdig4_rev2_frontend_attach() error handling
Add a notification to the dib7000p_i2c_enumeration() failure path in
cxusb_dualdig4_rev2_frontend_attach().
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Herton Ronaldo Krzesinski [Mon, 10 May 2010 18:43:31 +0000 (15:43 -0300)]
V4L/DVB: saa7134: add RM-K6 remote control support for Avermedia M135A
This change adds support for one more remote control type for Avermedia
M135A (model RM-K6), shipped with Positivo machines.
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Ringel [Sun, 23 May 2010 18:31:44 +0000 (15:31 -0300)]
V4L/DVB: tm6000: add DVB support for tuner xc5000
[mchehab@redhat.com: Fix compilation breakage due to duplicate cfg config delaration without {}]
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Ringel [Sun, 23 May 2010 18:29:26 +0000 (15:29 -0300)]
V4L/DVB: tm6000: set variable dev_mode in function tm6000_start_stream
set variable dev_mode in function tm6000_start_stream and check mode
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Ringel [Sun, 23 May 2010 18:29:24 +0000 (15:29 -0300)]
V4L/DVB: tm6000: Properly select the tuners
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Ringel [Sun, 23 May 2010 18:29:25 +0000 (15:29 -0300)]
V4L/DVB: tm6000: Add control to the power led
Turn power led off, if device is disconnected
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Ringel [Wed, 19 May 2010 16:58:27 +0000 (13:58 -0300)]
V4L/DVB: tm6000: bugfix stabilizing urb data
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Ringel [Wed, 19 May 2010 16:58:26 +0000 (13:58 -0300)]
V4L/DVB: tm6000: bugfix video image
bugfix: Avoid loosing frames, causing image delays on some of the image lines.
[mchehab@redhat.com: Fix compilation breakage by merging with the patch fix]
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Ringel [Wed, 19 May 2010 16:58:25 +0000 (13:58 -0300)]
V4L/DVB: tm6000: add vbi message inside the type switch
add case line for vbi message
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Ringel [Wed, 19 May 2010 16:58:24 +0000 (13:58 -0300)]
V4L/DVB: tm6000: bugfix incorrect size
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dmitri Belimov [Tue, 18 May 2010 07:23:29 +0000 (04:23 -0300)]
V4L/DVB: tm6000, reset I2C bus function
Add new function for reset I2C bus. Rework some code for use this function.
Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Ringel [Mon, 10 May 2010 16:22:50 +0000 (13:22 -0300)]
V4L/DVB: tm6000: Remove an extra ; symbol
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Ringel [Mon, 10 May 2010 16:22:51 +0000 (13:22 -0300)]
V4L/DVB: tm6000: add extension module support
add module init over tm6000 extension
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Herton Ronaldo Krzesinski [Sat, 8 May 2010 05:23:37 +0000 (02:23 -0300)]
V4L/DVB: saa7134: add support for Avermedia M733A
This change adds support for Avermedia M733A. The original version for
linux 2.6.31 was sent to me from Avermedia, original author is unknown.
I ported it to current kernels, expanded and fixed key code handling for
RM-K6 remote control, and added an additional pci id also supported.
[mchehab@redhat.com: make checkpatch.pl happier]
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Guy Martin [Fri, 7 May 2010 07:34:40 +0000 (04:34 -0300)]
V4L/DVB: stv6110x: Fix kernel null pointer deref
The following OOPS happened when plugging two TT s2-1600:
[ 96.521023] saa7146: register extension 'budget dvb'.
[ 96.521052] budget dvb 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 96.521070] IRQ 16/: IRQF_DISABLED is not guaranteed on shared IRQs
[ 96.521076] saa7146: found saa7146 @ mem
ffffc90011182c00 (revision 1, irq 16) (0x13c2,0x101c).
[ 96.521080] saa7146 (0): dma buffer size 192512
[ 96.521081] DVB: registering new adapter (TT-Budget S2-1600 PCI)
[ 96.539929] adapter has MAC addr = 00:d0:5c:cc:b0:a2
[ 96.890149] stv6110x_attach: Attaching STV6110x
[ 96.912516] DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
[ 96.912600] budget dvb 0000:05:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 96.912639] IRQ 17/: IRQF_DISABLED is not guaranteed on shared IRQs
[ 96.912667] saa7146: found saa7146 @ mem
ffffc90011314800 (revision 1, irq 17) (0x13c2,0x101c).
[ 96.912673] saa7146 (1): dma buffer size 192512
[ 96.912676] DVB: registering new adapter (TT-Budget S2-1600 PCI)
[ 96.930893] adapter has MAC addr = 00:d0:5c:cc:b0:a3
[ 97.233478] BUG: unable to handle kernel NULL pointer dereference at
0000000000000010
[ 97.233647] IP: [<
ffffffffa029c450>] stv6110x_set_mode+0x70/0x80 [stv6110x]
[ 97.233753] PGD
3c16f067 PUD
3c383067 PMD 0
[ 97.234147] CPU 0
[ 97.234246] Pid: 5200, comm: modprobe Not tainted 2.6.33.2 #1 P5QSE/P5Q SE
[ 97.234317] RIP: 0010:[<
ffffffffa029c450>] [<
ffffffffa029c450>] stv6110x_set_mode+0x70/0x80 [stv6110x]
[ 97.234456] RSP: 0018:
ffff88003c125c98 EFLAGS:
00010246
[ 97.234461] RAX:
ffffffffa029c460 RBX:
ffff88003f84d800 RCX:
ffff88003a19e140
[ 97.234461] RDX:
0000000000000000 RSI:
0000000000000001 RDI:
0000000000000000
[ 97.234461] RBP:
ffff88003f84d828 R08:
0000000000000002 R09:
0000000000000004
[ 97.234461] R10:
0000000000000003 R11:
0000000000000010 R12:
ffff88003f84d800
[ 97.234461] R13:
ffff88003f84d828 R14:
ffff88003f84d828 R15:
0000000000000001
[ 97.234461] FS:
00007f9f7253e6f0(0000) GS:
ffff880001800000(0000) knlGS:
0000000000000000
[ 97.234461] CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
[ 97.234461] CR2:
0000000000000010 CR3:
000000003c382000 CR4:
00000000000006b0
[ 97.234461] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 97.234461] DR3:
0000000000000000 DR6:
00000000ffff0ff0 DR7:
0000000000000400
[ 97.234461] Process modprobe (pid: 5200, threadinfo
ffff88003c124000, task
ffff88003e893ac0)
[ 97.234461]
ffff88003f84d800 ffff88003f84d828 ffff88003f84d800 ffffffffa0292343
[ 97.234461] <0>
ffff88003f84d828 ffff88003ef70ae0 ffffffffa0280800 ffffffffa02934d2
[ 97.234461] <0>
ffffffffa0295260 0000000000000000 ffffffffa02948b0 ffff88003df79800
[ 97.234461] [<
ffffffffa0292343>] ? stv090x_sleep+0x33/0x120 [stv090x]
[ 97.234461] [<
ffffffffa02934d2>] ? stv090x_attach+0x1e2/0x73c [stv090x]
[ 97.234461] [<
ffffffff81007cc5>] ? dma_generic_alloc_coherent+0xa5/0x160
[ 97.234461] [<
ffffffffa026e1f5>] ? saa7146_init_one+0x7d5/0x910 [saa7146]
[ 97.234461] [<
ffffffff811b84b2>] ? local_pci_probe+0x12/0x20
[ 97.234461] [<
ffffffff811b87d0>] ? pci_device_probe+0x110/0x120
[ 97.234461] [<
ffffffff81221788>] ? driver_probe_device+0x98/0x1b0
[ 97.234461] [<
ffffffff81221933>] ? __driver_attach+0x93/0xa0
[ 97.234461] [<
ffffffff812218a0>] ? __driver_attach+0x0/0xa0
[ 97.234461] [<
ffffffff81220f18>] ? bus_for_each_dev+0x58/0x80
[ 97.234461] [<
ffffffff8122079d>] ? bus_add_driver+0x14d/0x280
[ 97.234461] [<
ffffffffa0284000>] ? budget_init+0x0/0xc [budget]
[ 97.234461] [<
ffffffff81221c29>] ? driver_register+0x79/0x170
[ 97.234461] [<
ffffffffa0284000>] ? budget_init+0x0/0xc [budget]
[ 97.234461] [<
ffffffff811b8a48>] ? __pci_register_driver+0x58/0xe0
[ 97.234461] [<
ffffffffa0284000>] ? budget_init+0x0/0xc [budget]
[ 97.234461] [<
ffffffff810001d5>] ? do_one_initcall+0x35/0x190
[ 97.234461] [<
ffffffff81063d37>] ? sys_init_module+0xe7/0x260
[ 97.234461] [<
ffffffff8100256b>] ? system_call_fastpath+0x16/0x1b
[ 97.234461] RIP [<
ffffffffa029c450>] stv6110x_set_mode+0x70/0x80 [stv6110x]
[ 97.234461] RSP <
ffff88003c125c98>
[ 97.240074] ---[ end trace
b53ecbbbbef15e99 ]---
Prevents calling stv6110x_set_mode() if fe->tuner_priv is not defined,
in order to avoid the above bug.
Signed-off-by: Guy Martin <gmsoft@tuxicoman.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Guy Martin [Fri, 7 May 2010 07:09:25 +0000 (04:09 -0300)]
V4L/DVB: TT CT-3650 DVB-C support
Add support for the DVB-C frontend of the TT CT-3650.
DVB-T fe, CI and IR are not implemented.
Signed-off-by: Guy Martin <gmsoft@tuxicoman.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 9 May 2010 09:44:16 +0000 (06:44 -0300)]
V4L/DVB: tvp514x: simplify try/g/s_fmt handling
Since there is only one possible format just have all three calls
do the same.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Vaibhav Hiremath <hvaibhav@ti.com>
Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 9 May 2010 09:40:18 +0000 (06:40 -0300)]
V4L/DVB: tvp514x: remove obsolete fmt_list
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Vaibhav Hiremath <hvaibhav@ti.com>
Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 9 May 2010 09:39:44 +0000 (06:39 -0300)]
V4L/DVB: tvp514x: add missing newlines
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Vaibhav Hiremath <hvaibhav@ti.com>
Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 9 May 2010 09:37:14 +0000 (06:37 -0300)]
V4L/DVB: tvp514x: there is only one supported format, so simplify the code
Get rid of unnecessary code since this driver supports only one
pixel format. Removing this code will make the transition to the
mbus API easier as well.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Vaibhav Hiremath <hvaibhav@ti.com>
Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 9 May 2010 09:32:47 +0000 (06:32 -0300)]
V4L/DVB: tvp514x: make std_list const
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Vaibhav Hiremath <hvaibhav@ti.com>
Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 9 May 2010 09:30:15 +0000 (06:30 -0300)]
V4L/DVB: tvp514x: do NOT change the std as a side effect
Several calls (try_fmt, g_parm among others) changed the current standard
as a side effect of that call. But the standard may only be changed by s_std.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Vaibhav Hiremath <hvaibhav@ti.com>
Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 8 May 2010 20:55:00 +0000 (17:55 -0300)]
V4L/DVB: v4l2-subdev.h: fix enum_mbus_fmt prototype
enum_mbus_fmt received an index argument that was defined as an int instead
of an unsigned int. This is now fixed. This had the knock-on effect that the
index argument in the callback get_formats in soc_camera.h also had to be
changed to unsigned int.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 9 May 2010 10:39:32 +0000 (07:39 -0300)]
V4L/DVB: au8522_decoder: g/s_fmt doesn't do anything: remove
g/s_fmt is going to disappear, so if it is not doing anything, then
just remove it.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 8 May 2010 20:26:00 +0000 (17:26 -0300)]
V4L/DVB: tvp5150: remove obsolete g/s_fmt ops
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 9 May 2010 13:19:25 +0000 (10:19 -0300)]
V4L/DVB: mt9v011: add enum/try/s_mbus_fmt support
Note that this driver is only used by em28xx and that em28xx does not
actually call the enum/try/s_fmt ops of mt9v011. So these functions
have never been tested.
And in fact the driver really implements cropping instead of scaling. So it
seems to be doing the wrong thing :-(
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 8 May 2010 22:02:11 +0000 (19:02 -0300)]
V4L/DVB: v4l2-mediabus.h: added V4L2_MBUS_FMT_SGRBG8_1X8
Needed for mt9v011.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 8 May 2010 20:20:35 +0000 (17:20 -0300)]
V4L/DVB: saa7115: remove obsolete g/s_fmt ops
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 8 May 2010 20:20:00 +0000 (17:20 -0300)]
V4L/DVB: cx24850: remove obsolete g/s_fmt ops
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 9 May 2010 13:11:01 +0000 (10:11 -0300)]
V4L/DVB: cx231xx: convert to s_mbus_fmt
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 9 May 2010 13:09:28 +0000 (10:09 -0300)]
V4L/DVB: cx23885: convert to s_mbus_fmt
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 8 May 2010 20:16:18 +0000 (17:16 -0300)]
V4L/DVB: pvrusb2: convert to s_mbus_fmt
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 9 May 2010 12:41:41 +0000 (09:41 -0300)]
V4L/DVB: saa7134: convert to use the new mbus API
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 9 May 2010 12:39:58 +0000 (09:39 -0300)]
V4L/DVB: saa6752hs: add g/s_mbus_fmt support
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 8 May 2010 20:08:58 +0000 (17:08 -0300)]
V4L/DVB: v4l2-mediabus.h: add two helper functions
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 8 May 2010 19:40:23 +0000 (16:40 -0300)]
V4L/DVB: saa717x: remove obsolete s_fmt op
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 8 May 2010 19:39:01 +0000 (16:39 -0300)]
V4L/DVB: saa7127: remove obsolete g_fmt support
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 8 May 2010 19:37:53 +0000 (16:37 -0300)]
V4L/DVB: cx18: remove old g/s_fmt from the cx18_av subdev
cx18 has now switched over completely to the new mediabus subdev ops.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 9 May 2010 12:54:58 +0000 (09:54 -0300)]
V4L/DVB: cx18: add s_mbus_fmt support
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 8 May 2010 19:28:51 +0000 (16:28 -0300)]
V4L/DVB: ivtv: convert to use s_mbus_fmt
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 9 May 2010 12:50:34 +0000 (09:50 -0300)]
V4L/DVB: saa717x: add support for s_mbus_fmt
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 9 May 2010 12:48:50 +0000 (09:48 -0300)]
V4L/DVB: cx25840: add support for s_mbus_fmt
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 9 May 2010 12:47:23 +0000 (09:47 -0300)]
V4L/DVB: saa7115: add s_mbus_fmt op
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 9 May 2010 09:54:46 +0000 (06:54 -0300)]
V4L/DVB: V4L2 Spec: Improve the VIDIOC_QUERY_DV_PRESET description
Make explicit what should happen when the input signal is missing,
unreliable or does not map to a supported preset.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Oliver Endriss [Wed, 19 May 2010 07:17:18 +0000 (04:17 -0300)]
V4L/DVB: ngene: Remove debug message
Remove debug message.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Oliver Endriss [Wed, 19 May 2010 07:15:44 +0000 (04:15 -0300)]
V4L/DVB: ngene: MSI cleanup
MSI cleanup.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Oliver Endriss [Sun, 16 May 2010 09:07:07 +0000 (06:07 -0300)]
V4L/DVB: ngene: Make command timeout workaround configurable
Make command timeout workaround configurable,
activate it for firmware version <= 17.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Oliver Endriss [Sun, 16 May 2010 08:29:14 +0000 (05:29 -0300)]
V4L/DVB: ngene: Implement support for MSI
Add MSI support, may be enabled with firmware version 18.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Oliver Endriss [Sun, 16 May 2010 08:17:49 +0000 (05:17 -0300)]
V4L/DVB: ngene: Do not call demuxer with interrupts disabled
It is neither a good idea nor necessary to call the demuxer with interrupts disabled.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Oliver Endriss [Sun, 16 May 2010 08:08:49 +0000 (05:08 -0300)]
V4L/DVB: ngene: Support new device 'Digital Devices DuoFlex S2 miniPCIe'
Add subsystem id DD10/DD20 'Digital Devices DuoFlex S2 miniPCIe'.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Warren Bosworth Focke [Fri, 7 May 2010 18:40:04 +0000 (15:40 -0300)]
V4L/DVB: gspca - sonixj: Add webcam 0c45:60ce
Signed-off-by: Warren Bosworth Focke <wbfocke@gmail.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-François Moine [Fri, 7 May 2010 18:35:08 +0000 (15:35 -0300)]
V4L/DVB: gspca - sonixj: Add information about some potential JPEG webcams
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-François Moine [Fri, 7 May 2010 18:27:44 +0000 (15:27 -0300)]
V4L/DVB: gspca - sonixb: Have 0c45:602e handled by sonixb instead of sn9c102
This change fixes the Debian Bug #579332
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=579332
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Sat, 15 May 2010 03:30:29 +0000 (00:30 -0300)]
V4L/DVB: pvrusb2: Fix kernel oops on device tear-down
pvrusb2: Delete sysfs class device as the _very_ last step, after
we're sure that all driver contexts have gone away first. This is
important because it appears that there isn't any protection from a
struct device instance reference a deleted struct class instance. The
assumption in the kernel code appears to be that the class instance is
assumed to be around for the life of the device. So we can't let the
class instance go away until all referencing device instances are
gone; this is ensured by delaying removal of the class instance until
after the driver contexts have all gone away. This bug has been
present for a very long time but it didn't apparently become malignant
until recently (probably because of other changes in the kernel).
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Sat, 15 May 2010 03:28:44 +0000 (00:28 -0300)]
V4L/DVB: pvrusb2: Fix minor internal array allocation
pvrusb2: Need one extra attribute slot allocated so that worst case still has a
trailing null pointer. This wasn't causing visible symptoms; it was
found through inspection while investigating other issues.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Sat, 15 May 2010 03:23:46 +0000 (00:23 -0300)]
V4L/DVB: pvrusb2: Fix USB parent device reference count
pvrusb2: Correctly reference count pointer to parent USB device when linked
from sysfs interface. This is technically a pretty nasty problem,
however as far as I know nobody had been getting burned by it (yet).
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Sat, 15 May 2010 03:15:38 +0000 (00:15 -0300)]
V4L/DVB: pvrusb2: Fix kernel oops at device unregistration
pvrusb2: Fix oops caused by touching deleted memory after
unregistration. This bug was introduced when we had started using
video_device_node_name() - that function was being called potentially
after the underlying structure (referenced by that function) had been
deleted. The fix rearranges things slightly so that the function is
called before destruction takes place.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Sat, 15 May 2010 03:13:35 +0000 (00:13 -0300)]
V4L/DVB: pvrusb2: New feature to mark specific hardware support as experimental
This adds a flag in the device attribute structure which can be used
to mark support for a particular device as experimental. Any devices
flagged in this way, when encountered at run-time, will generate a
warning message to the kernel log.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Sat, 15 May 2010 03:09:47 +0000 (00:09 -0300)]
V4L/DVB: pvrusb2: Avoid using stack allocated buffers when performing USB I/O
Drivers shouldn't assume that the stack is DMA-safe.
[mchehab@redhat.com: fix patch description]
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Sat, 15 May 2010 03:07:04 +0000 (00:07 -0300)]
V4L/DVB: pvrusb2: Fix Gotview hardware support
pvrusb2: Fix RF tuner problem with gotview hardware - this bug was
introduced when switching over to the subdev model of driver control
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Abylay Ospan [Wed, 12 May 2010 07:24:09 +0000 (04:24 -0300)]
V4L/DVB: cx23885: Check register errors
Fix kernel Oops when number of NetUP Dual DVB-S2-CI cards more than
DVB_MAX_ADAPTERS limit.
[mchehab@redhat.com: move the return to the proper place]
Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 10 May 2010 06:55:25 +0000 (03:55 -0300)]
V4L/DVB: c-qcam: convert to V4L2
Note: due to lack of hardware this conversion is untested.
However, it is pretty straightforward so I do not expect any problems.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 10 May 2010 06:51:02 +0000 (03:51 -0300)]
V4L/DVB: bw-qcam: convert to V4L2
Note: due to lack of hardware I was not able to test this conversion.
But it is pretty straightforward, so I do not expect any problems.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Linus Torvalds [Sun, 30 May 2010 20:21:02 +0000 (13:21 -0700)]
Linux 2.6.35-rc1
.. and thus endeth the merge window.
Linus Torvalds [Sun, 30 May 2010 19:46:17 +0000 (12:46 -0700)]
Merge branch 'slub/urgent' of git://git./linux/kernel/git/penberg/slab-2.6
* 'slub/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
SLUB: Allow full duplication of kmalloc array for 390
slub: move kmem_cache_node into it's own cacheline
Linus Torvalds [Sun, 30 May 2010 19:35:15 +0000 (12:35 -0700)]
Merge branch 'core-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
mutex: Fix optimistic spinning vs. BKL
Linus Torvalds [Sun, 30 May 2010 19:35:01 +0000 (12:35 -0700)]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf tui: Fix last use_browser problem related to .perfconfig
perf symbols: Add the build id cache to the vmlinux path
perf tui: Reset use_browser if stdout is not a tty
ring-buffer: Move zeroing out excess in page to ring buffer code
ring-buffer: Reset "real_end" when page is filled
Linus Torvalds [Sun, 30 May 2010 17:08:03 +0000 (10:08 -0700)]
ia64: revert __node_random addition
This partially reverts commit
4ec37de89d8c758ee8115e0e64b3f994910789ee
("[IA64] Fix build breakage"), since the commit that made it necessary
got reverted earlier (see commit
35926ff5fba8, 'Revert "cpusets:
randomize node rotor used in cpuset_mem_spread_node()"')
Even if we ever re-introduce this, there is no reason to make
__node_random be some architecture-specific function.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 30 May 2010 16:16:14 +0000 (09:16 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mszeredi/fuse
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
mm: export generic_pipe_buf_*() to modules
fuse: support splice() reading from fuse device
fuse: allow splice to move pages
mm: export remove_from_page_cache() to modules
mm: export lru_cache_add_*() to modules
fuse: support splice() writing to fuse device
fuse: get page reference for readpages
fuse: use get_user_pages_fast()
fuse: remove unneeded variable
Linus Torvalds [Sun, 30 May 2010 16:13:43 +0000 (09:13 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/rostedt/linux-2.6-kconfig
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig:
kconfig: Hide error output in find command in streamline_config.pl
kconfig: Fix typo in comment in streamline_config.pl
kconfig: Make a variable local in streamline_config.pl
Linus Torvalds [Sun, 30 May 2010 16:13:08 +0000 (09:13 -0700)]
Merge branch 'for-next' of git://git./linux/kernel/git/sameo/mfd-2.6
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (47 commits)
mfd: Rename twl5031 sih modules
mfd: Storage class for timberdale should be before const qualifier
mfd: Remove unneeded and dangerous clearing of clientdata
mfd: New AB8500 driver
gpio: Fix inverted rdc321x gpio data out registers
mfd: Change rdc321x resources flags to IORESOURCE_IO
mfd: Move pcf50633 irq related functions to its own file.
mfd: Use threaded irq for pcf50633
mfd: pcf50633-adc: Fix potential race in pcf50633_adc_sync_read
mfd: Fix pcf50633 bitfield logic in interrupt handler
gpio: rdc321x needs to select MFD_CORE
mfd: Use menuconfig for quicker config editing
ARM: AB3550 board configuration and irq for U300
mfd: AB3550 core driver
mfd: AB3100 register access change to abx500 API
mfd: Renamed ab3100.h to abx500.h
gpio: Add TC35892 GPIO driver
mfd: Add Toshiba's TC35892 MFD core
mfd: Delay to mask tsc irq in max8925
mfd: Remove incorrect wm8350 kfree
...
Linus Torvalds [Sun, 30 May 2010 16:12:43 +0000 (09:12 -0700)]
Merge branch 'next' of git://git./linux/kernel/git/djbw/async_tx
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
DMAENGINE: DMA40 U8500 platform configuration
DMA: PL330: Add dma api driver
Linus Torvalds [Sun, 30 May 2010 16:12:16 +0000 (09:12 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IB/qib: Remove DCA support until feature is finished
IB/qib: Use a single txselect module parameter for serdes tuning
IB/qib: Don't rely on (undefined) order of function parameter evaluation
IB/ucm: Use memdup_user()
IB/qib: Fix undefined symbol error when CONFIG_PCI_MSI=n
Linus Torvalds [Sun, 30 May 2010 16:11:11 +0000 (09:11 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-fs-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
quota: Convert quota statistics to generic percpu_counter
ext3 uses rb_node = NULL; to zero rb_root.
quota: Fixup dquot_transfer
reiserfs: Fix resuming of quotas on remount read-write
pohmelfs: Remove dead quota code
ufs: Remove dead quota code
udf: Remove dead quota code
quota: rename default quotactl methods to dquot_
quota: explicitly set ->dq_op and ->s_qcop
quota: drop remount argument to ->quota_on and ->quota_off
quota: move unmount handling into the filesystem
quota: kill the vfs_dq_off and vfs_dq_quota_on_remount wrappers
quota: move remount handling into the filesystem
ocfs2: Fix use after free on remount read-only
Fix up conflicts in fs/ext4/super.c and fs/ufs/file.c
Linus Torvalds [Sun, 30 May 2010 16:06:13 +0000 (09:06 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, cpufeature: Unbreak compile with gcc 3.x
x86, pat: Fix memory leak in free_memtype
x86, k8: Fix section mismatch for powernowk8_exit()
lib/atomic64_test: fix missing include of linux/kernel.h
x86: remove last traces of quicklist usage
x86, setup: Phoenix BIOS fixup is needed on Dell Inspiron Mini 1012
x86: "nosmp" command line option should force the system into UP mode
arch/x86/pci: use kasprintf
x86, apic: ack all pending irqs when crashed/on kexec
Rafael J. Wysocki [Thu, 27 May 2010 20:16:22 +0000 (22:16 +0200)]
CPU: Avoid using unititialized error variable in disable_nonboot_cpus()
If there's only one CPU online when disable_nonboot_cpus() is called,
the error variable will not be initialized and that may lead to
erroneous behavior. Fix this issue by initializing error in
disable_nonboot_cpus() as appropriate.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Fri, 28 May 2010 22:08:08 +0000 (15:08 -0700)]
rapidio: fix new kernel-doc warnings
Fix a bunch of new rapidio kernel-doc warnings:
Warning(include/linux/rio.h:123): No description found for parameter 'comp_tag'
Warning(include/linux/rio.h:123): No description found for parameter 'phys_efptr'
Warning(include/linux/rio.h:123): No description found for parameter 'em_efptr'
Warning(include/linux/rio.h:123): No description found for parameter 'pwcback'
Warning(include/linux/rio.h:247): No description found for parameter 'set_domain'
Warning(include/linux/rio.h:247): No description found for parameter 'get_domain'
Warning(drivers/rapidio/rio-scan.c:1133): No description found for parameter 'rdev'
Warning(drivers/rapidio/rio-scan.c:1133): Excess function parameter 'port' description in 'rio_init_em'
Warning(drivers/rapidio/rio.c:349): No description found for parameter 'rdev'
Warning(drivers/rapidio/rio.c:349): Excess function parameter 'mport' description in 'rio_request_inb_pwrite'
Warning(drivers/rapidio/rio.c:393): No description found for parameter 'port'
Warning(drivers/rapidio/rio.c:393): No description found for parameter 'local'
Warning(drivers/rapidio/rio.c:393): No description found for parameter 'destid'
Warning(drivers/rapidio/rio.c:393): No description found for parameter 'hopcount'
Warning(drivers/rapidio/rio.c:393): Excess function parameter 'rdev' description in 'rio_mport_get_physefb'
Warning(drivers/rapidio/rio.c:845): Excess function parameter 'local' description in 'rio_std_route_clr_table'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 30 May 2010 16:02:02 +0000 (09:02 -0700)]
Merge branch 'fixes' of git://git./linux/kernel/git/kyle/parisc-2.6
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
parisc: Call pagefault_disable/pagefault_enable in kmap_atomic/kunmap_atomic
parisc: Remove unnecessary macros from entry.S
parisc: LWS fixes for syscall.S
parisc: Delete unnecessary nop's in entry.S
parisc: Avoid interruption in critical region in entry.S
parisc: invoke oom-killer from page fault
parisc: clear floating point exception flag on SIGFPE signal
parisc: Use of align_frame provides stack frame.
Linus Torvalds [Sun, 30 May 2010 16:00:03 +0000 (09:00 -0700)]
Revert "cpusets: randomize node rotor used in cpuset_mem_spread_node()"
This reverts commit
0ac0c0d0f837c499afd02a802f9cf52d3027fa3b, which
caused cross-architecture build problems for all the wrong reasons.
IA64 already added its own version of __node_random(), but the fact is,
there is nothing architectural about the function, and the original
commit was just badly done. Revert it, since no fix is forthcoming.
Requested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 30 May 2010 15:56:39 +0000 (08:56 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: clean up on forwarded aborted mds request
ceph: fix leak of osd authorizer
ceph: close out mds, osd connections before stopping auth
ceph: make lease code DN specific
fs/ceph: Use ERR_CAST
ceph: renew auth tickets before they expire
ceph: do not resend mon requests on auth ticket renewal
ceph: removed duplicated #includes
ceph: avoid possible null dereference
ceph: make mds requests killable, not interruptible
sched: add wait_for_completion_killable_timeout
Christoph Lameter [Thu, 27 May 2010 14:17:17 +0000 (09:17 -0500)]
SLUB: Allow full duplication of kmalloc array for 390
Commit
756dee75872a2a764b478e18076360b8a4ec9045 ("SLUB: Get rid of dynamic DMA
kmalloc cache allocation") makes S390 run out of kmalloc caches. Increase the
number of kmalloc caches to a safe size.
Cc: <stable@kernel.org> [ .33 and .34 ]
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
John David Anglin [Sun, 11 Apr 2010 16:36:14 +0000 (16:36 +0000)]
parisc: Call pagefault_disable/pagefault_enable in kmap_atomic/kunmap_atomic
Based on the generic implementation of kmap_atomic and kunmap_atomic,
we should call pagefault_disable and pagefault_enable in our PA8000
implementation.
The define for kmap_atomic_prot was also missing, and I updated
kmap_atomic_pfn to use the generic implementation because of the
change to kmap_atomic.
I believe that this change is needed to fix the fork copy-on-write
bug.
Signed-off-by: John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
John David Anglin [Sun, 11 Apr 2010 17:03:54 +0000 (17:03 +0000)]
parisc: Remove unnecessary macros from entry.S
The EXTR, DEP and DEPI macros are unnecessary. There are PA 1.X
pneumonics available with the same functionality, and the DEP and DEPI
macros conflict with assembler pneumonics.
Tested on a variety of 32 and 64-bit systems.
Signed-off-by: John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
John David Anglin [Sun, 11 Apr 2010 17:26:34 +0000 (17:26 +0000)]
parisc: LWS fixes for syscall.S
1) Gate immediately and save a branch.
2) Fix off by one error in checking entry number.
3) Use sr7 instead of sr3 in error return path as sr3 might not
contain correct value.
4) Enable locking on UP systems to prevent incorrect operation of
the cas_action critical region on page faults.
Tested on several systems, including UP c3750 with 2.6.33.2 kernel.
Signed-off-by: John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
projects / platform / kernel / linux-amlogic.git / log