drm/bridge: sii9234: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-31-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: sii902x: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-30-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: nxp-ptn3460: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-28-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: megachips: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-27-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: lt9611uxc: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-26-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: lt9611: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-25-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: lt9211: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-24-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: lt8912b: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-23-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: it66121: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-22-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: it6505: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-21-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: icn6211: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-19-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: anx7625: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-18-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge/analogix/anx78xx: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-17-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge/analogix/anx6345: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-16-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: lt8912b: Add hot plug detection

Enable hot plug detection when it is available on the HDMI port.
Without this connecting to a different monitor with incompatible timing
before the 10 seconds poll period will lead to a broken display output.

Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Adrien Grassein <adrien.grassein@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221128112320.25708-1-francesco@dolcini.it

drm/bridge: chrontel-ch7033: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://lore.kernel.org/all/20221118224540.619276-20-uwe@kleine-koenig.org/

drm/gud: Fix missing include

Add missing vmalloc.h include.

Fixes: c17d048609bf ("drm/gud: Use the shadow plane helper")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221207-gud-missing-include-v1-0-c5b32c9c59da@tronnes.org

drm/bridge: Document the expected behaviour of DSI host controllers

The exact behaviour of DSI host controllers is not specified,
therefore define it.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20221205173328.1395350-7-dave.stevenson@raspberrypi.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/panel: Add prepare_prev_first flag to drm_panel

Mapping to the drm_bridge flag pre_enable_prev_first,
add a new flag prepare_prev_first to drm_panel to allow
the panel driver to request that the upstream bridge should
be pre_enabled before the panel prepare.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221205173328.1395350-6-dave.stevenson@raspberrypi.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/bridge: Introduce pre_enable_prev_first to alter bridge init order

DSI sink devices typically want the DSI host powered up and configured
before they are powered up. pre_enable is the place this would normally
happen, but they are called in reverse order from panel/connector towards
the encoder, which is the "wrong" order.

Add a new flag pre_enable_prev_first that any bridge can set
to swap the order of pre_enable (and post_disable) for that and the
immediately previous bridge.
Should the immediately previous bridge also set the
pre_enable_prev_first flag, the previous bridge to that will be called
before either of those which requested pre_enable_prev_first.

eg:
- Panel
- Bridge 1
- Bridge 2 pre_enable_prev_first
- Bridge 3
- Bridge 4 pre_enable_prev_first
- Bridge 5 pre_enable_prev_first
- Bridge 6
- Encoder
Would result in pre_enable's being called as Panel, Bridge 1, Bridge 3,
Bridge 2, Bridge 6, Bridge 5, Bridge 4, Encoder.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20221205173328.1395350-5-dave.stevenson@raspberrypi.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/bridge: Drop unused drm_bridge_chain functions

The drm_bridge_chain_{pre_enable,enable,disable,post_disable} has no
users left and we have atomic variants that should be used.
Drop them so they do not gain new users.

Adjust a few comments to avoid references to the dropped functions.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221205173328.1395350-4-dave.stevenson@raspberrypi.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/mediatek: dp: Replace usage of drm_bridge_chain_ functions

Commit f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort
driver") added usage of the drm_bridge_chain_ functions which are
to be deprecated.

Replace with the drm_atomic_bridge_chain_ variants using the
current state.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221205173328.1395350-3-dave.stevenson@raspberrypi.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/bridge: ps8640: Use atomic variants of drm_bridge_funcs

The atomic variants of enable/disable in drm_bridge_funcs are the
preferred operations - introduce these.

The ps8640 driver used the non-atomic variants of the drm_bridge_chain_pre_enable/
drm_bridge_chain_post_disable - convert these to the atomic variants.

v2:
  - Init state operations in drm_bridge_funcs (Laurent)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Cc: Jitao Shi <jitao.shi@mediatek.com>
Cc: Philip Chen <philipchen@chromium.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221205173328.1395350-2-dave.stevenson@raspberrypi.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Documentation: gpu: vc4: Add KUnit Tests Section

Now that we have VC4-specific tests in place, let's document them
properly.

Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-20-4615a663a84a@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: tests: Add unit test suite for the PV muxing

The HVS to PixelValve muxing code is fairly error prone and has a bunch
of arbitrary constraints due to the hardware setup.

Let's create a test suite that makes sure that the possible combinations
work and the invalid ones don't.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-19-4615a663a84a@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: tests: Fail the current test if we access a register

Accessing a register when running under kunit is a bad idea since our
device is completely mocked.

Fail the current test if we ever access any of our hardware registers.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-18-4615a663a84a@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: tests: Introduce a mocking infrastructure

In order to test the current atomic_check hooks we need to have a DRM
device that has roughly the same capabilities and layout that the actual
hardware. We'll also need a bunch of functions to create arbitrary
atomic states.

Let's create some helpers to create a device that behaves like the real
one, and some helpers to maintain the atomic state we want to check.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-17-4615a663a84a@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: hvs: Provide a function to initialize the HVS structure

We'll need to initialize the HVS structure without a backing device to
create a mock we'll use for testing.

Split the structure initialization part into a separate function.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-16-4615a663a84a@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: crtc: Make encoder lookup helper public

We'll need a function that looks up an encoder by its vc4_encoder_type.
Such a function is already present in the CRTC code, so let's make it
public so that we can reuse it in the unit tests.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-15-4615a663a84a@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: crtc: Introduce a lower-level crtc init helper

The current vc4_crtc_init() helper assumes that we will be using
hardware planes and calls vc4_plane_init().

While it's a reasonable assumption, we'll want to mock the plane and
thus provide our own. Let's create a helper that will take the plane as
an argument.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-14-4615a663a84a@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: Move HVS state to main header

In order to introduce unit tests for the HVS state computation, we'll
need access to the vc4_hvs_state struct definition and its associated
helpers.

Let's move them in our driver header.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-13-4615a663a84a@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/tests: Add a test for DRM managed actions

DRM-managed actions are supposed to be ran whenever the device is
released. Let's introduce a basic unit test to make sure it happens.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-12-4615a663a84a@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/tests: helpers: Allow to pass a custom drm_driver

Some tests will need to provide their own drm_driver instead of relying
on the dumb one in the helpers, so let's create a helper that allows to
do so.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-11-4615a663a84a@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/tests: helpers: Allow for a custom device struct to be allocated

The current helper to allocate a DRM device doesn't allow for any
subclassing by drivers, which is going to be troublesome as we work on
getting some kunit testing on atomic modesetting code.

Let's use a similar pattern to the other allocation helpers by providing
the structure size and offset as arguments.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-10-4615a663a84a@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/tests: helpers: Make sure the device is bound

The device managed resources are freed when the device is detached, so
it has to be bound in the first place.

Let's create a fake driver that we will bind to our fake device to
benefit from the device managed cleanups in our tests.

Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-9-4615a663a84a@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/tests: helpers: Switch to a platform_device

The device managed resources are ran if the device has bus, which is not
the case of a root_device.

Let's use a platform_device instead.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-8-4615a663a84a@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/tests: helpers: Create the device in another function

We'll need in some tests to control when the device needs to be added
and removed, so let's split the device creation from the DRM device
creation function.

Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-7-4615a663a84a@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/tests: helpers: Remove the name parameter

The device name isn't really useful, we can just define it instead of
exposing it in the API.

Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-6-4615a663a84a@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/tests: helpers: Rename the device init helper

The name doesn't really fit the conventions for the other helpers in
DRM/KMS, so let's rename it to make it obvious that we allocate a new
DRM device.

Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-5-4615a663a84a@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/tests: helpers: Switch to EXPORT_SYMBOL_GPL

drm_kunit_device_init() among other things will allocate a device and
wrap around root_device_register. This function is exported with
EXPORT_SYMBOL_GPL, so we can't really change the license.

Fixes: a77a3ffa151b ("drm/tests: helpers: Add missing export")
Suggested-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-4-4615a663a84a@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/tests: helpers: Document drm_kunit_device_init()

Commit 44a3928324e9 ("drm/tests: Add Kunit Helpers") introduced the
drm_kunit_device_init() function but didn't document it properly. Add
that documentation.

Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-3-4615a663a84a@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/tests: Introduce a config option for the KUnit helpers

Driver-specific tests will need access to the helpers without pulling
every DRM framework test. Let's create an intermediate Kconfig options
for the helpers.

Suggested-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-2-4615a663a84a@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/tests: helpers: Move the helper header to include/drm

We'll need to use those helpers from drivers too, so let's move it to a
more visible location.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-1-4615a663a84a@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm: panel-orientation-quirks: Add quirk for DynaBook K50

Like the ASUS T100HAN for which there is already a quirk,
the DynaBook K50 has a 800x1280 portrait screen mounted
in the tablet part of a landscape oriented 2-in-1.
Update the quirk to be more generic and apply to this device.

Signed-off-by: Allen Ballway <ballway@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221130170811.1.Iee9a494547541dade9eeee9521cc8b811e76a8a0@changeid

drm: panel-orientation-quirks: Add quirk for Lenovo Yoga Tab 3 X90F

The Lenovo Yoga Tab 3 X90F has a portrait 1600x2560 LCD used in
landscape mode, add a quirk for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221127181539.104223-1-hdegoede@redhat.com

drm/gud: Enable synchronous flushing by default

gud has a module parameter that controls whether framebuffer flushing
happens synchronously during the commit or asynchronously in a worker.

GNOME before version 3.38 handled all displays in the same rendering loop.
This lead to gud slowing down the refresh rate for a faster monitor. This
has now been fixed so lets change the default.

The plan is to remove async flushing in the future. The code is now
structured in a way that makes it easy to do this.

Link: https://blogs.gnome.org/shell-dev/2020/07/02/splitting-up-the-frame-clock/
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221122-gud-shadow-plane-v2-6-435037990a83@tronnes.org

drm/gud: Use the shadow plane helper

Use the shadow plane helper to take care of mapping the framebuffer for
CPU access. The synchronous flushing is now done inline without the use of
a worker. The async path now uses a shadow buffer to hold framebuffer
changes and it doesn't read the framebuffer behind userspace's back
anymore.

v2:
- Use src as variable name for iosys_map (Thomas)
- Prepare imported buffer for CPU access in the driver (Thomas)

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221122-gud-shadow-plane-v2-5-435037990a83@tronnes.org

drm/gud: Prepare buffer for CPU access in gud_flush_work()

In preparation for moving to the shadow plane helper prepare the
framebuffer for CPU access as early as possible.

v2:
- Use src as variable name for iosys_map (Thomas)

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221122-gud-shadow-plane-v2-4-435037990a83@tronnes.org

drm/gud: Split up gud_flush_work()

In preparation for inlining synchronous flushing split out the part of
gud_flush_work() that can be shared by the sync and async code paths.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221122-gud-shadow-plane-v2-3-435037990a83@tronnes.org

drm/gud: Don't retry a failed framebuffer flush

If a framebuffer flush fails the driver will do one retry by requeing the
worker. Currently the worker is used even for synchronous flushing, but a
later patch will inline it, so this needs to change. Thinking about how to
solve this I came to the conclusion that this retry mechanism was a fix
for a problem that was only in the mind of the developer (me) and not
something that solved a real problem.

So let's remove this for now and revisit later should it become necessary.
gud_add_damage() has now only one caller so it can be inlined.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221122-gud-shadow-plane-v2-2-435037990a83@tronnes.org

drm/gud: Fix UBSAN warning

UBSAN complains about invalid value for bool:

[  101.165172] [drm] Initialized gud 1.0.0 20200422 for 2-3.2:1.0 on minor 1
[  101.213360] gud 2-3.2:1.0: [drm] fb1: guddrmfb frame buffer device
[  101.213426] usbcore: registered new interface driver gud
[  101.989431] ================================================================================
[  101.989441] UBSAN: invalid-load in linux/include/linux/iosys-map.h:253:9
[  101.989447] load of value 121 is not a valid value for type '_Bool'
[  101.989451] CPU: 1 PID: 455 Comm: kworker/1:6 Not tainted 5.18.0-rc5-gud-5.18-rc5 #3
[  101.989456] Hardware name: Hewlett-Packard HP EliteBook 820 G1/1991, BIOS L71 Ver. 01.44 04/12/2018
[  101.989459] Workqueue: events_long gud_flush_work [gud]
[  101.989471] Call Trace:
[  101.989474]  <TASK>
[  101.989479]  dump_stack_lvl+0x49/0x5f
[  101.989488]  dump_stack+0x10/0x12
[  101.989493]  ubsan_epilogue+0x9/0x3b
[  101.989498]  __ubsan_handle_load_invalid_value.cold+0x44/0x49
[  101.989504]  dma_buf_vmap.cold+0x38/0x3d
[  101.989511]  ? find_busiest_group+0x48/0x300
[  101.989520]  drm_gem_shmem_vmap+0x76/0x1b0 [drm_shmem_helper]
[  101.989528]  drm_gem_shmem_object_vmap+0x9/0xb [drm_shmem_helper]
[  101.989535]  drm_gem_vmap+0x26/0x60 [drm]
[  101.989594]  drm_gem_fb_vmap+0x47/0x150 [drm_kms_helper]
[  101.989630]  gud_prep_flush+0xc1/0x710 [gud]
[  101.989639]  ? _raw_spin_lock+0x17/0x40
[  101.989648]  gud_flush_work+0x1e0/0x430 [gud]
[  101.989653]  ? __switch_to+0x11d/0x470
[  101.989664]  process_one_work+0x21f/0x3f0
[  101.989673]  worker_thread+0x200/0x3e0
[  101.989679]  ? rescuer_thread+0x390/0x390
[  101.989684]  kthread+0xfd/0x130
[  101.989690]  ? kthread_complete_and_exit+0x20/0x20
[  101.989696]  ret_from_fork+0x22/0x30
[  101.989706]  </TASK>
[  101.989708] ================================================================================

The source of this warning is in iosys_map_clear() called from
dma_buf_vmap(). It conditionally sets values based on map->is_iomem. The
iosys_map variables are allocated uninitialized on the stack leading to
->is_iomem having all kinds of values and not only 0/1.

Fix this by zeroing the iosys_map variables.

Fixes: 40e1a70b4aed ("drm: Add GUD USB Display driver")
Cc: <stable@vger.kernel.org> # v5.18+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221122-gud-shadow-plane-v2-1-435037990a83@tronnes.org

drm/ttm: use ttm_bo_wait_ctx instead of ttm_bo_wait

Make sure that we use the correct settings from the context.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221125102137.1801-8-christian.koenig@amd.com

drm/ttm: merge ttm_bo_api.h and ttm_bo_driver.h v2

Merge and cleanup the two headers into a single description of the
object API. Also move all the documentation to the implementation and
drop unnecessary includes from the header.

No functional change.

v2: minimal checkpatch.pl cleanup

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221125102137.1801-4-christian.koenig@amd.com

drm/ttm: use per BO cleanup workers

Instead of a single worker going over the list of delete BOs in regular
intervals use a per BO worker which blocks for the resv object and
locking of the BO.

This not only simplifies the handling massively, but also results in
much better response time when cleaning up buffers.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221125102137.1801-3-christian.koenig@amd.com

drm/ttm: remove ttm_bo_(un)lock_delayed_workqueue

Those functions never worked correctly since it is still perfectly
possible that a buffer object is released and the background worker
restarted even after calling them.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221125102137.1801-2-christian.koenig@amd.com

drm/mipi-dbi: Move drm_dev_{enter, exit}() out from fb_dirty functions

Call drm_dev_enter() and drm_dev_exit() in the outer-most callbacks
of the modesetting pipeline. If drm_dev_enter() fails, the driver can
thus avoid unnecessary work.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Noralf Trønnes <noralf@tronnes.org> # drm/tiny/mi0283qt
Link: https://patchwork.freedesktop.org/patch/msgid/20221202125644.7917-9-tzimmermann@suse.de

drm/mipi-dbi: Use shadow-plane mappings

Use the buffer mappings provided by shadow-plane helpers. As the
mappings are established while the commit can still fail, errors
are now reported correctly to callers.

v2:
* use shadow-plane state directly (Noralf)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Noralf Trønnes <noralf@tronnes.org> # drm/tiny/mi0283qt
Link: https://patchwork.freedesktop.org/patch/msgid/20221202125644.7917-8-tzimmermann@suse.de

drm/mipi-dbi: Support shadow-plane state

Implement MIPI DBI planes with struct drm_shadow_plane_state, so that the
respective drivers can use the vmap'ed GEM-buffer memory. Implement state
helpers, the {begin,end}_fb_access helpers and wire up everything.

With this commit, MIPI DBI drivers can access the GEM object's memory
that is provided by shadow-plane state. The actual changes to drivers
are implemented separately.

v2:
* use shadow-plane state directly (Noralf)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Noralf Trønnes <noralf@tronnes.org> # drm/tiny/mi0283qt
Link: https://patchwork.freedesktop.org/patch/msgid/20221202125644.7917-7-tzimmermann@suse.de

drm/mipi-dbi: Prepare framebuffer copy operation in pipe-update helpers

Move the vmap/vunmap blocks from the inner fb_dirty helpers into the
MIPI DBI update helpers. The function calls can result in waiting and/or
processing overhead. Reduce the penalties by executing the functions once
in the outer-most function of the pipe update.

This change also prepares for MIPI DBI for shadow-plane helpers. With
shadow-plane helpers, transfer source buffers are mapped into kernel
address space automatically.

v2:
* keep each driver's existing buffer-mapping patter (Noralf)
* zero-initialize iosys_map arrays (Noralf)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Noralf Trønnes <noralf@tronnes.org> # drm/tiny/mi0283qt
Link: https://patchwork.freedesktop.org/patch/msgid/20221202125644.7917-6-tzimmermann@suse.de

drm/mipi-dbi: Initialize default driver functions with macro

Introduce DRM_MIPI_DBI_SIMPLE_DISPLAY_PIPE_FUNCS to initialize MIPI-DBI
helpers to default values and convert drivers. The prepare_fb function
set by some drivers is called implicitly by simple-kms helpers, so leave
it out.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Noralf Trønnes <noralf@tronnes.org> # drm/tiny/mi0283qt
Link: https://patchwork.freedesktop.org/patch/msgid/20221202125644.7917-5-tzimmermann@suse.de

drm/st7586: Call MIPI DBI mode_valid helper

MIPI DBI drivers validate each mode against their native resolution.
Add this test to st7586.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221202125644.7917-4-tzimmermann@suse.de

drm/ili9225: Call MIPI DBI mode_valid helper

MIPI DBI drivers validate each mode against their native resolution.
Add this test to ili9225.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221202125644.7917-3-tzimmermann@suse.de

drm/simple-kms: Remove drm_gem_simple_display_pipe_prepare_fb()

The helper drm_gem_simple_display_pipe_prepare_fb() is simple-KMS'
default implementation for prepare_fb. Remove the call from drivers
that set it explicitly. Then inline the helper into the only caller
within simple-kms helpers. No functional changes.

Simple-KMS drivers that implement the prepare_fb callback should call
drm_gem_plane_helper_prepare_fb() directly.

v2:
* fix typo in commit message

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221202125644.7917-2-tzimmermann@suse.de

drm/vc4: dpi: Fix format mapping for RGB565

The mapping is incorrect for RGB565_1X16 as it should be
DPI_FORMAT_18BIT_666_RGB_1 instead of DPI_FORMAT_18BIT_666_RGB_3.

Fixes: 08302c35b59d ("drm/vc4: Add DPI driver")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-7-eb76e26a772d@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: dpi: Change the default DPI format to being 18bpp, not 24.

DPI hasn't really been used up until now, so the default has
been meaningless.
In theory we should be able to pass the desired format for the
adjacent bridge chip through, but framework seems to be missing
for that.

As the main device to use DPI is the VGA666 or Adafruit Kippah,
both of which use RGB666, change the default to being RGB666 instead
of RGB888.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-6-eb76e26a772d@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: dpi: Support BGR666 formats

The VC4 DPI output can support multiple BGR666 variants, but they were
never added to the driver. Let's add the the support for those formats.

Signed-off-by: Joerg Quinten <aBUGSworstnightmare@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-5-eb76e26a772d@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: dpi: Support RGB565 format

The RGB565 format with padding over 24 bits
(MEDIA_BUS_FMT_RGB565_1X24_CPADHI) is supported by the vc4 DPI
controller. This is what the Geekworm MZP280 DPI display uses, so let's
add support for it in the DPI controller driver.

Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-4-eb76e26a772d@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

media: uapi: add MEDIA_BUS_FMT_BGR666_1X24_CPADHI

Add the BGR666 format MEDIA_BUS_FMT_BGR666_1X24_CPADHI supported by the
RaspberryPi.

Signed-off-by: Joerg Quinten <aBUGSworstnightmare@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-3-eb76e26a772d@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

media: uapi: add MEDIA_BUS_FMT_BGR666_1X18

Add the BGR666 format MEDIA_BUS_FMT_BGR666_1X18 supported by the
RaspberryPi.

Signed-off-by: Joerg Quinten <aBUGSworstnightmare@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-2-eb76e26a772d@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

media: uapi: add MEDIA_BUS_FMT_RGB565_1X24_CPADHI

Add the MEDIA_BUS_FMT_RGB565_1X24_CPADHI format used by the Geekworm
MZP280 panel for the Raspberry Pi.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-1-eb76e26a772d@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/tests: probe_helper: Fix uninitialized variable

The len variable is used while uninitialized. Initialize it.

Fixes: 1e4a91db109f ("drm/probe-helper: Provide a TV get_modes helper")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20221201090736.290935-1-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/modes: Use strscpy() to copy command-line mode name

The mode name in struct drm_cmdline_mode can hold 32 characters at most,
which can easily get overrun. Switch to strscpy() to prevent such a
thing.

Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1527354 ("Security best practices violations")
Fixes: a7ab155397dd ("drm/modes: Switch to named mode descriptors")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20221128081938.742410-2-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/doc: Fix title underline length

The underline length for the new Analog TV properties section doesn't
match the title length, resulting in a warning.

Fixes: 7d63cd8526f1 ("drm/connector: Add TV standard property")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20221128081938.742410-1-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/meson: dw-hdmi: Use devm_regulator_*get_enable*()

Simplify using the devm_regulator_get_enable_optional(). Also drop the
now unused struct member 'hdmi_supply'.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/df0096b5aea2a18d1540cde379c5abf589ccd7c4.1669799805.git.mazziesaccount@gmail.com

drm/bridge: sii902x: Use devm_regulator_bulk_get_enable()

Simplify using devm_regulator_bulk_get_enable()

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/e6153c7beb2076b9ea13082b2024ec3296bc08bc.1669799805.git.mazziesaccount@gmail.com

drm/vkms: change min cursor size to accept smaller values

Change min cursor size of vkms driver from 20 to 10, to increase the IGT
test coverage of vkms by enabling 32x10 cursor size subtests in
kms_cursor_crc

Signed-off-by: Alaa Emad <aemad@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221109113945.20938-1-aemad@igalia.com

drm/vkms: Fix null-ptr-deref in vkms_release()

A null-ptr-deref is triggered when it tries to destroy the workqueue in
vkms->output.composer_workq in vkms_release().

 KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f]
 CPU: 5 PID: 17193 Comm: modprobe Not tainted 6.0.0-11331-gd465bff130bf #24
 RIP: 0010:destroy_workqueue+0x2f/0x710
 ...
 Call Trace:
  <TASK>
  ? vkms_config_debugfs_init+0x50/0x50 [vkms]
  __devm_drm_dev_alloc+0x15a/0x1c0 [drm]
  vkms_init+0x245/0x1000 [vkms]
  do_one_initcall+0xd0/0x4f0
  do_init_module+0x1a4/0x680
  load_module+0x6249/0x7110
  __do_sys_finit_module+0x140/0x200
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x46/0xb0

The reason is that an OOM happened which triggers the destroy of the
workqueue, however, the workqueue is alloced in the later process,
thus a null-ptr-deref happened. A simple call graph is shown as below:

 vkms_init()
  vkms_create()
    devm_drm_dev_alloc()
      __devm_drm_dev_alloc()
        devm_drm_dev_init()
          devm_add_action_or_reset()
            devm_add_action() # an error happened
            devm_drm_dev_init_release()
              drm_dev_put()
                kref_put()
                  drm_dev_release()
                    vkms_release()
                      destroy_workqueue() # null-ptr-deref happened
    vkms_modeset_init()
      vkms_output_init()
        vkms_crtc_init() # where the workqueue get allocated

Fix this by checking if composer_workq is NULL before passing it to
the destroy_workqueue() in vkms_release().

Fixes: 6c234fe37c57 ("drm/vkms: Implement CRC debugfs API")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221101065156.41584-3-yuancan@huawei.com

drm/vkms: Fix memory leak in vkms_init()

A memory leak was reported after the vkms module install failed.

unreferenced object 0xffff88810bc28520 (size 16):
  comm "modprobe", pid 9662, jiffies 4298009455 (age 42.590s)
  hex dump (first 16 bytes):
    01 01 00 64 81 88 ff ff 00 00 dc 0a 81 88 ff ff  ...d............
  backtrace:
    [<00000000e7561ff8>] kmalloc_trace+0x27/0x60
    [<000000000b1954a0>] 0xffffffffc45200a9
    [<00000000abbf1da0>] do_one_initcall+0xd0/0x4f0
    [<000000001505ee87>] do_init_module+0x1a4/0x680
    [<00000000958079ad>] load_module+0x6249/0x7110
    [<00000000117e4696>] __do_sys_finit_module+0x140/0x200
    [<00000000f74b12d2>] do_syscall_64+0x35/0x80
    [<000000008fc6fcde>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

The reason is that the vkms_init() returns without checking the return
value of vkms_create(), and if the vkms_create() failed, the config
allocated at the beginning of vkms_init() is leaked.

 vkms_init()
   config = kmalloc(...) # config allocated
   ...
   return vkms_create() # vkms_create failed and config is leaked

Fix this problem by checking return value of vkms_create() and free the
config if error happened.

Fixes: 2df7af93fdad ("drm/vkms: Add vkms_config type")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221101065156.41584-2-yuancan@huawei.com

drm/panel-samsung-atna33xc20: Extend autosuspend delay

Avoid the panel oscillating on and off during boot. In some cases it
will be more than 1000ms between powering the panel to read the EDID early
during boot, and enabling the panel for display. Extending the
autosuspend delay avoids autosuspending during this interval.

Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221117133655.5.I96ce2a565ff893eddcbee70174c991179311a3ae@changeid

drm/bridge/parade-ps8640: Extend autosuspend

Same change as done for panel-samsung-atna33xc20. Extend the autosuspend
delay to avoid oscillating between power status during boot.

Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221117133655.4.If6153da69ec4bc9e83d5f095ef6e6b07283940a5@changeid

drm/panel-simple: Use ktime_get_boottime for delays

ktime_get_boottime continues while the device is suspended. This change
ensures that the resume path will not be delayed if the power off delay
has already been met while the device is suspended

Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221117133655.3.Iebd9f79aba0a62015fd2383fe6986c2d6fe12cfd@changeid

drm/panel-samsung-atna33xc20: Use ktime_get_boottime for delays

ktime_get_boottime continues while the device is suspended. This change
ensures that the resume path will not be delayed if the power off delay
has already been met while the device is suspended

Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221117133655.2.Iebd9f79aba0a62015fd2383fe6986c2d6fe12cfd@changeid

drm/panel-edp: Use ktime_get_boottime for delays

ktime_get is based on CLOCK_MONOTONIC which stops on suspend. On
suspend, the time that the panel was powerd off is recorded with
ktime_get, and on resume this time is compared to the current ktime_get
time to determine if the driver should wait for the panel to power down
completely before re-enabling it.

Because we're using ktime_get, this delay doesn't account for the time
that the device is suspended, during which the power down delay may have
already elapsed.

Change to use ktime_get_boottime throughout, which uses CLOCK_BOOTTIME
which does not stop when suspended. This ensures that the resume path
will not be delayed if the power off delay has already been met while
the device is suspended.

Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221117133655.1.I51639dc112bbbe27259df6bdad56dbabd655d91a@changeid

drm/bridge: ti-sn65dsi86: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118224540.619276-37-uwe@kleine-koenig.org

drm/bridge: megachips: Fix error handling in i2c_register_driver()

A problem about insmod megachips-stdpxxxx-ge-b850v3-fw.ko failed is
triggered with the following log given:

[ 4497.981497] Error: Driver 'stdp4028-ge-b850v3-fw' is already registered, aborting...
insmod: ERROR: could not insert module megachips-stdpxxxx-ge-b850v3-fw.ko: Device or resource busy

The reason is that stdpxxxx_ge_b850v3_init() returns i2c_add_driver()
directly without checking its return value, if i2c_add_driver() failed,
it returns without calling i2c_del_driver() on the previous i2c driver,
resulting the megachips-stdpxxxx-ge-b850v3-fw can never be installed
later.
A simple call graph is shown as below:

 stdpxxxx_ge_b850v3_init()
   i2c_add_driver(&stdp4028_ge_b850v3_fw_driver)
   i2c_add_driver(&stdp2690_ge_b850v3_fw_driver)
     i2c_register_driver()
       driver_register()
         bus_add_driver()
           priv = kzalloc(...) # OOM happened
   # return without delete stdp4028_ge_b850v3_fw_driver

Fix by calling i2c_del_driver() on stdp4028_ge_b850v3_fw_driver when
i2c_add_driver() returns error.

Fixes: fcfa0ddc18ed ("drm/bridge: Drivers for megachips-stdpxxxx-ge-b850v3-fw (LVDS-DP++)")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Tested-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108091226.114524-1-yuancan@huawei.com

drm/audio: make drm_audio_component.h self-contained

The file uses bool and struct completion, include the relevant headers.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123130932.3863985-1-jani.nikula@intel.com

drm/tests: helpers: Add missing export

drm_kunit_device_init() is a public function meant to be used by other
tests, but isn't exported. This leads to modpost errors when the other
tests are compiled as module.

Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221128081938.742410-3-maxime@cerno.tech

drm/vc4: vec: Use pm_runtime_resume_and_get() in vc4_vec_encoder_enable()

Commit f0601ef8631c ("drm/vc4: vec: Protect device resources after
removal") add fail path for vc4_vec_encoder_enable(), and will put
usage_counter only when pm_runtime_get_sync() succeeds. However,
pm_runtime_get_sync() will increment usage_counter even it failed. Fix
it by replacing it with pm_runtime_resume_and_get() to keep usage
counter balanced.

Fixes: e4b81f8c74c8 ("drm/vc4: Add support for the VEC (Video Encoder) IP")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20221124015113.18540-1-shangxiaojing@huawei.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: crtc: Provide a CRTC name

It's fairly hard to figure out the instance of the CRTC affected by an
atomic change using the default name.

Since we can provide our own to the CRTC initialization functions, let's
do so to make the debugging sessions easier.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123-rpi-kunit-tests-v1-20-051a0bb60a16@cerno.tech

drm/vc4: crtc: Pass the device and data in vc4_crtc_init

Both users of vc4_crtc_init need the same extra initialization to set
the pointer to the platform_device and the CRTC data. Since it's
mandatory, let's make them both arguments of vc4_crtc_init().

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123-rpi-kunit-tests-v1-17-051a0bb60a16@cerno.tech

drm/vc4: txp: Initialise the CRTC before the encoder and connector

It makes more sense to register the CRTC before the encoder and
connectors, so let's move our call around.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123-rpi-kunit-tests-v1-16-051a0bb60a16@cerno.tech

drm/vc4: Add TXP encoder type

The TXP is integrated as a separate CRTC/Encoder/Connector combo, but
for some reason doesn't rely on the vc4_encoder type and it's associated
type.

Let's create a type to make it consistent with the other encoders.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123-rpi-kunit-tests-v1-15-051a0bb60a16@cerno.tech

drm/vc4: txp: Reorder the variable assignments

The current order of variable assignments is unneccessarily complex,
let's make it simpler.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123-rpi-kunit-tests-v1-14-051a0bb60a16@cerno.tech

drm/vc4: kms: Sort the CRTCs by output before assigning them

On the vc4 devices (and later), the blending is done by a single device
called the HVS. The HVS has three FIFO that can operate in parallel, and
route their output to 6 CRTCs and 7 encoders on the BCM2711.

Each of these CRTCs and encoders have some constraints on which FIFO
they can feed from, so we need some code to take all those constraints
into account and assign FIFOs to CRTCs.

The problem can be simplified by assigning those FIFOs to CRTCs by
ascending output index number. We had a comment mentioning it already,
but we were never actually enforcing it.

It was working still in most situations because the probe order is
roughly equivalent, except for the (optional, and fairly rarely used on
the Pi4) VEC which was last in the probe order sequence, but one of the
earliest device to assign.

This resulted in configurations that were rejected by our code but were
still valid with a different assignment.

We can fix this by making sure we assign CRTCs to FIFOs by ordering
them by ascending HVS output index.

Fixes: 87ebcd42fb7b ("drm/vc4: crtc: Assign output to channel automatically")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123-rpi-kunit-tests-v1-10-051a0bb60a16@cerno.tech

drm/vc4: kms: Constify the HVS old/new state helpers

The vc4_hvs_get_(old|new)_global_state functions don't modify the
drm_atomic_state passed as an argument, so let's make it const.

Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v1-13-051a0bb60a16@cerno.tech
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: Constify container_of wrappers

None of our wrappers around container_of to access our objects from the
DRM object pointer actually modify the latter.

Let's make them const.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123-rpi-kunit-tests-v1-11-051a0bb60a16@cerno.tech

drm/atomic: Constify the old/new state accessors

The drm_atomic_get_(old|new)_*_state don't modify the passed
drm_atomic_state, so we can make it const.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123-rpi-kunit-tests-v1-9-051a0bb60a16@cerno.tech

drm: mxsfb: DRM_MXSFB should depend on ARCH_MXS || ARCH_MXC

Freescale/NXP i.MX LCDIF and eLCDIF LCD controllers are only present on
Freescale/NXP i.MX SoCs.  Hence add a dependency on ARCH_MXS ||
ARCH_MXC, to prevent asking the user about this driver when configuring
a kernel without Freescale/NXP i.MX support.

Fixes: 45d59d704080cc0c ("drm: Add new driver for MXSFB controller")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/98e74779ca2bc575d91afff03369e86b080c01ac.1669046358.git.geert+renesas@glider.be

drm: mxsfb: DRM_IMX_LCDIF should depend on ARCH_MXC

The Freescale/NXP i.MX LCDIFv3 LCD controller is only present on
Freescale/NXP i.MX SoCs.  Hence add a dependency on ARCH_MXC, to prevent
asking the user about this driver when configuring a kernel without
Freescale/NXP i.MX support.

Fixes: 9db35bb349a0ef32 ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/6103c1aa65a7888c12d351ae63f29850f29f42b9.1669046403.git.geert+renesas@glider.be

drm/fb-helper: Don't use the preferred depth for the BPP default

If no preferred value for bits-per-pixel has been given, fall back
to 32. Never use the preferred depth. The color depth is the number
of color/alpha bits per pixel, while bpp is the overall number of
bits in most cases.

Most noteworthy, XRGB8888 has a depth of 24 and a bpp value of 32.
Using depth for bpp would make the value 24 as well and format
selection in fbdev helpers fails. Unfortunately XRGB8888 is the most
common format and the old heuristic therefore fails for most of
the drivers (unless they implement the 24-bit RGB888 format).

Picking a bpp of 32 will later on result in a default depth of 24
and the format XRGB8888. As XRGB8888 is the default format for most
of the current and legacy graphics stack, all drivers must support
it. So it is the safe choice.

v2:
* fix commit-message typo (Javier)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123115348.2521-8-tzimmermann@suse.de