review.tizen.org Git - platform/kernel/linux-starfive.git/log

Merge branch 'linus' into efi/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'pstore-v5.5-rc6' of git://git./linux/kernel/git/kees/linux

Pull pstore fix from Kees Cook:
"Cengiz Can forwarded a Coverity report about more problems with a rare
  pstore initialization error path, so the allocation lifetime was
  rearranged to avoid needing to share the kfree() responsibilities
  between caller and callee"

* tag 'pstore-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore/ram: Regularize prz label allocation lifetime

Merge tag 'drm-fixes-2020-01-10' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Pre-LCA pull request I'm not sure how things will look next week,
  myself and Daniel are at LCA and I'm speaking quite late, so if I get
  my talk finished I'll probably process fixes.

  This week has a bunch of i915 fixes, some amdgpu fixes, one sun4i, one
  core MST, and one core fb_helper fix. More details below:

  core:
   - mst Fix NO_STOP_BIT bit offset (Wayne)

  fb_helper:
   - fb_helper: Fix bits_per_pixel param set behavior to round up
     (Geert)

  sun4i:
   - Fix RGB_DIV clock min divider on old hardware (Chen-Yu)

  amdgpu:
   - Stability fix for raven
   - Reduce pixel encoding to if max clock is exceeded on HDMI to allow
     additional high res modes
   - enable DRIVER_SYNCOBJ_TIMELINE for amdgpu

  i915:
   - Fix GitLab issue #446 causing GPU hangs: Do not restore invalid RS
     state
   - Fix GitLab issue #846: Restore coarse power gating that was
     disabled by initial RC66 context corruption security fixes.
   - Revert f6ec9483091f ("drm/i915: extend audio CDCLK>=2*BCLK
     constraint to more platforms") to avoid screen flicker
   - Fix to fill in unitialized uabi_instance in virtual engine uAPI
   - Add two missing W/As for ICL and EHL"

* tag 'drm-fixes-2020-01-10' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: add DRIVER_SYNCOBJ_TIMELINE to amdgpu
  drm/amd/display: Reduce HDMI pixel encoding if max clock is exceeded
  Revert "drm/amdgpu: Set no-retry as default."
  drm/fb-helper: Round up bits_per_pixel if possible
  drm/sun4i: tcon: Set RGB DCLK min. divider based on hardware model
  drm/i915/dp: Disable Port sync mode correctly on teardown
  drm/i915: Add Wa_1407352427:icl,ehl
  drm/i915: Add Wa_1408615072 and Wa_1407596294 to icl,ehl
  drm/i915/gt: Restore coarse power gating
  drm/i915/gt: Do not restore invalid RS state
  drm/i915: Limit audio CDCLK>=2*BCLK constraint back to GLK only
  drm/i915/gt: Mark up virtual engine uabi_instance
  drm/dp_mst: correct the shifting in DP_REMOTE_I2C_READ

Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
"First RDMA subsystem updates for 5.5-rc. A very small set of fixes,
  most people seem to still be recovering from December!

  Five small driver fixes:

   - Fix error flow with MR allocation in bnxt_re

   - An errata work around for bnxt_re

   - Misuse of the workqueue API in hfi1

   - Protocol error in hfi1

   - Regression in 5.5 related to the mmap rework with i40iw"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  i40iw: Remove setting of VMA private data and use rdma_user_mmap_io
  IB/hfi1: Adjust flow PSN with the correct resync_psn
  IB/hfi1: Don't cancel unused work item
  RDMA/bnxt_re: Fix Send Work Entry state check while polling completions
  RDMA/bnxt_re: Avoid freeing MR resources if dereg fails

Merge tag 'drm-intel-fixes-2020-01-09-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix GitLab issue #446 causing GPU hangs: Do not restore invalid RS state
- Fix GitLab issue #846: Restore coarse power gating that was disabled
by initial RC66 context corruption security fixes.
- Revert f6ec9483091f ("drm/i915: extend audio CDCLK>=2*BCLK constraint to more platforms")
to avoid screen flicker
- Fix to fill in unitialized uabi_instance in virtual engine uAPI
- Add two missing W/As for ICL and EHL

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109133458.GA15558@jlahtine-desk.ger.corp.intel.com

Merge tag 'gpio-v5.5-3' of git://git./linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
"Here is a host of GPIO fixes for the v5.5 series. The ACPI fix is
  especially important, see summary below and in the commit for details:

   - Select GPIOLIB_IRQCHIP on the max77620 GPIO expander

   - Fix context restore in the Zynq driver

   - Create a new ACPI quirk handler for disabling wakeups on
     problematic hardware.

   - Fix a coding style issue on the mockup device"

* tag 'gpio-v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism
  gpiolib: acpi: Turn dmi_system_id table into a generic quirk table
  gpio: zynq: Fix for bug in zynq_gpio_restore_context API
  gpio: max77620: Add missing dependency on GPIOLIB_IRQCHIP
  gpio: mockup: fix coding style

Merge tag 'pinctrl-v5.5-4' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
"Two fixes for pin control, not much to say about it, it's just regular
  driver fixes:

   - Fix erroneous shift in the Meson driver

   - Make Lochnagar select the GPIOLIB Kconfig symbol"

* tag 'pinctrl-v5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: meson: Fix wrong shift value when get drive-strength
  pinctrl: lochnagar: select GPIOLIB

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:
"Just a few small fixups here"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: imx_sc_key - only take the valid data from SCU firmware as key state
  Input: add safety guards to input_set_keycode()
  Input: input_event - fix struct padding on sparc64
  Input: uinput - always report EPOLLOUT

Merge branch 'for-linus' of git://git./linux/kernel/git/hid/hid

Pull HID fixes from Jiri Kosina:

- fix for OOB in hiddev, from Dmitry Torokhov

- _poll API fixes for hidraw, from Marcel Holtmann

- functional fix for Steam driver, from Rodrigo Rivas Costa

- a few new device IDs / device-specific quirks and other assorted
   smaller fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: steam: Fix input device disappearing
  HID: intel-ish-hid: ipc: Add Tiger Lake PCI device ID
  drivers/hid/hid-multitouch.c: fix a possible null pointer access.
  HID: wacom: Recognize new MobileStudio Pro PID
  HID: intel-ish-hid: ipc: add CMP device id
  HID: hiddev: fix mess in hiddev_open()
  HID: hid-input: clear unmapped usages
  HID: Add quirk for incorrect input length on Lenovo Y720
  HID: asus: Ignore Asus vendor-page usage-code 0xff events
  HID: ite: Add USB id match for Acer SW5-012 keyboard dock
  HID: Add quirk for Xin-Mo Dual Controller
  HID: Fix slab-out-of-bounds read in hid_field_extract
  HID: multitouch: Add LG MELF0410 I2C touchscreen support
  HID: uhid: Fix returning EPOLLOUT from uhid_char_poll
  HID: hidraw: Fix returning EPOLLOUT from hidraw_poll

Merge git://git./linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

1) Missing netns pointer init in arp_tables, from Florian Westphal.

2) Fix normal tcp SACK being treated as D-SACK, from Pengcheng Yang.

3) Fix divide by zero in sch_cake, from Wen Yang.

4) Len passed to skb_put_padto() is wrong in qrtr code, from Carl
    Huang.

5) cmd->obj.chunk is leaked in sctp code error paths, from Xin Long.

6) cgroup bpf programs can be released out of order, fix from Roman
    Gushchin.

7) Make sure stmmac debugfs entry name is changed when device name
    changes, from Jiping Ma.

8) Fix memory leak in vlan_dev_set_egress_priority(), from Eric
    Dumazet.

9) SKB leak in lan78xx usb driver, also from Eric Dumazet.

10) Ridiculous TCA_FQ_QUANTUM values configured can cause loops in fq
    packet scheduler, reject them. From Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
  tipc: fix wrong connect() return code
  tipc: fix link overflow issue at socket shutdown
  netfilter: ipset: avoid null deref when IPSET_ATTR_LINENO is present
  netfilter: conntrack: dccp, sctp: handle null timeout argument
  atm: eni: fix uninitialized variable warning
  macvlan: do not assume mac_header is set in macvlan_broadcast()
  net: sch_prio: When ungrafting, replace with FIFO
  mlxsw: spectrum_qdisc: Ignore grafting of invisible FIFO
  MAINTAINERS: Remove myself as co-maintainer for qcom-ethqos
  gtp: fix bad unlock balance in gtp_encap_enable_socket
  pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM
  tipc: remove meaningless assignment in Makefile
  tipc: do not add socket.o to tipc-y twice
  net: stmmac: dwmac-sun8i: Allow all RGMII modes
  net: stmmac: dwmac-sunxi: Allow all RGMII modes
  net: usb: lan78xx: fix possible skb leak
  net: stmmac: Fixed link does not need MDIO Bus
  vlan: vlan_changelink() should propagate errors
  vlan: fix memory leak in vlan_dev_set_egress_priority
  stmmac: debugfs entry name is not be changed when udev rename device name.
  ...

HID: steam: Fix input device disappearing

The `connected` value for wired devices was not properly initialized,
it must be set to `true` upon creation, because wired devices do not
generate connection events.

When a raw client (the Steam Client) uses the device, the input device
is destroyed. Then, when the raw client finishes, it must be recreated.
But since the `connected` variable was false this never happended.

Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Merge tag 'amd-drm-fixes-5.5-2020-01-08' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

amd-drm-fixes-5.5-2020-01-08:

amdgpu:
- Stability fix for raven
- Reduce pixel encoding to if max clock is exceeded on HDMI
to allow additional high res modes

UAPI:
- enable DRIVER_SYNCOBJ_TIMELINE for amdgpu

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108213649.5485-1-alexander.deucher@amd.com

Merge tag 'drm-misc-fixes-2020-01-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

mst: Fix NO_STOP_BIT bit offset (Wayne)
sun4i: Fix RGB_DIV clock min divider on old hardware (Chen-Yu)
fb_helper: Fix bits_per_pixel param set behavior to round up (Geert)

Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108205949.GA233273@art_vandelay

pstore/ram: Regularize prz label allocation lifetime

In my attempt to fix a memory leak, I introduced a double-free in the
pstore error path. Instead of trying to manage the allocation lifetime
between persistent_ram_new() and its callers, adjust the logic so
persistent_ram_new() always takes a kstrdup() copy, and leaves the
caller's allocation lifetime up to the caller. Therefore callers are
_always_ responsible for freeing their label. Before, it only needed
freeing when the prz itself failed to allocate, and not in any of the
other prz failure cases, which callers would have no visibility into,
which is the root design problem that lead to both the leak and now
double-free bugs.

Reported-by: Cengiz Can <cengiz@kernel.wtf>
Link: https://lore.kernel.org/lkml/d4ec59002ede4aaf9928c7f7526da87c@kernel.wtf
Fixes: 8df955a32a73 ("pstore/ram: Fix error-path memory leak in persistent_ram_new() callers")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>

tipc: fix wrong connect() return code

The current 'tipc_wait_for_connect()' function does a wait-loop for the
condition 'sk->sk_state != TIPC_CONNECTING' to conclude if the socket
connecting has done. However, when the condition is met, it returns '0'
even in the case the connecting is actually failed, the socket state is
set to 'TIPC_DISCONNECTING' (e.g. when the server socket has closed..).
This results in a wrong return code for the 'connect()' call from user,
making it believe that the connection is established and go ahead with
building, sending a message, etc. but finally failed e.g. '-EPIPE'.

This commit fixes the issue by changing the wait condition to the
'tipc_sk_connected(sk)', so the function will return '0' only when the
connection is really established. Otherwise, either the socket 'sk_err'
if any or '-ETIMEDOUT'/'-EINTR' will be returned correspondingly.

Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: fix link overflow issue at socket shutdown

When a socket is suddenly shutdown or released, it will reject all the
unreceived messages in its receive queue. This applies to a connected
socket too, whereas there is only one 'FIN' message required to be sent
back to its peer in this case.

In case there are many messages in the queue and/or some connections
with such messages are shutdown at the same time, the link layer will
easily get overflowed at the 'TIPC_SYSTEM_IMPORTANCE' backlog level
because of the message rejections. As a result, the link will be taken
down. Moreover, immediately when the link is re-established, the socket
layer can continue to reject the messages and the same issue happens...

The commit refactors the '__tipc_shutdown()' function to only send one
'FIN' in the situation mentioned above. For the connectionless case, it
is unavoidable but usually there is no rejections for such socket
messages because they are 'dest-droppable' by default.

In addition, the new code makes the other socket states clear
(e.g.'TIPC_LISTEN') and treats as a separate case to avoid misbehaving.

Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./pub/scm/linux/kernel/git/pablo/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Missing netns context in arp_tables, from Florian Westphal.

2) Underflow in flowtable reference counter, from wenxu.

3) Fix incorrect ethernet destination address in flowtable offload,
   from wenxu.

4) Check for status of neighbour entry, from wenxu.

5) Fix NAT port mangling, from wenxu.

6) Unbind callbacks from destroy path to cleanup hardware properly
   on flowtable removal.

7) Fix missing casting statistics timestamp, add nf_flowtable_time_stamp
   and use it.

8) NULL pointer exception when timeout argument is null in conntrack
   dccp and sctp protocol helpers, from Florian Westphal.

9) Possible nul-dereference in ipset with IPSET_ATTR_LINENO, also from
   Florian.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: ipset: avoid null deref when IPSET_ATTR_LINENO is present

The set uadt functions assume lineno is never NULL, but it is in
case of ip_set_utest().

syzkaller managed to generate a netlink message that calls this with
LINENO attr present:

general protection fault: 0000 [#1] PREEMPT SMP KASAN
RIP: 0010:hash_mac4_uadt+0x1bc/0x470 net/netfilter/ipset/ip_set_hash_mac.c:104
Call Trace:
ip_set_utest+0x55b/0x890 net/netfilter/ipset/ip_set_core.c:1867
nfnetlink_rcv_msg+0xcf2/0xfb0 net/netfilter/nfnetlink.c:229
netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
nfnetlink_rcv+0x1ba/0x460 net/netfilter/nfnetlink.c:563

pass a dummy lineno storage, its easier than patching all set
implementations.

This seems to be a day-0 bug.

Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Reported-by: syzbot+34bd2369d38707f3f4a7@syzkaller.appspotmail.com
Fixes: a7b4f989a6294 ("netfilter: ipset: IP set core support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: conntrack: dccp, sctp: handle null timeout argument

The timeout pointer can be NULL which means we should modify the
per-nets timeout instead.

All do this, except sctp and dccp which instead give:

general protection fault: 0000 [#1] PREEMPT SMP KASAN
net/netfilter/nf_conntrack_proto_dccp.c:682
ctnl_timeout_parse_policy+0x150/0x1d0 net/netfilter/nfnetlink_cttimeout.c:67
cttimeout_default_set+0x150/0x1c0 net/netfilter/nfnetlink_cttimeout.c:368
nfnetlink_rcv_msg+0xcf2/0xfb0 net/netfilter/nfnetlink.c:229
netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477

Reported-by: syzbot+46a4ad33f345d1dd346e@syzkaller.appspotmail.com
Fixes: c779e849608a8 ("netfilter: conntrack: remove get_timeout() indirection")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

atm: eni: fix uninitialized variable warning

With -O3, gcc has found an actual unintialized variable stored
into an mmio register in two instances:

drivers/atm/eni.c: In function 'discard':
drivers/atm/eni.c:465:13: error: 'dma[1]' is used uninitialized in this function [-Werror=uninitialized]
writel(dma[i*2+1],eni_dev->rx_dma+dma_wr*8+4);
^
drivers/atm/eni.c:465:13: error: 'dma[3]' is used uninitialized in this function [-Werror=uninitialized]

Change the code to always write zeroes instead.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

macvlan: do not assume mac_header is set in macvlan_broadcast()

Use of eth_hdr() in tx path is error prone.

Many drivers call skb_reset_mac_header() before using it,
but others do not.

Commit 6d1ccff62780 ("net: reset mac header in dev_start_xmit()")
attempted to fix this generically, but commit d346a3fae3ff
("packet: introduce PACKET_QDISC_BYPASS socket option") brought
back the macvlan bug.

Lets add a new helper, so that tx paths no longer have
to call skb_reset_mac_header() only to get a pointer
to skb->data.

Hopefully we will be able to revert 6d1ccff62780
("net: reset mac header in dev_start_xmit()") and save few cycles
in transmit fast path.

BUG: KASAN: use-after-free in __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline]
BUG: KASAN: use-after-free in mc_hash drivers/net/macvlan.c:251 [inline]
BUG: KASAN: use-after-free in macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277
Read of size 4 at addr ffff8880a4932401 by task syz-executor947/9579

CPU: 0 PID: 9579 Comm: syz-executor947 Not tainted 5.5.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
__kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:639
__asan_report_load_n_noabort+0xf/0x20 mm/kasan/generic_report.c:145
__get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline]
mc_hash drivers/net/macvlan.c:251 [inline]
macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277
macvlan_queue_xmit drivers/net/macvlan.c:520 [inline]
macvlan_start_xmit+0x402/0x77f drivers/net/macvlan.c:559
__netdev_start_xmit include/linux/netdevice.h:4447 [inline]
netdev_start_xmit include/linux/netdevice.h:4461 [inline]
dev_direct_xmit+0x419/0x630 net/core/dev.c:4079
packet_direct_xmit+0x1a9/0x250 net/packet/af_packet.c:240
packet_snd net/packet/af_packet.c:2966 [inline]
packet_sendmsg+0x260d/0x6220 net/packet/af_packet.c:2991
sock_sendmsg_nosec net/socket.c:639 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:659
__sys_sendto+0x262/0x380 net/socket.c:1985
__do_sys_sendto net/socket.c:1997 [inline]
__se_sys_sendto net/socket.c:1993 [inline]
__x64_sys_sendto+0xe1/0x1a0 net/socket.c:1993
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x442639
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffc13549e08 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000442639
RDX: 000000000000000e RSI: 0000000020000080 RDI: 0000000000000003
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000403bb0 R14: 0000000000000000 R15: 0000000000000000

Allocated by task 9389:
save_stack+0x23/0x90 mm/kasan/common.c:72
set_track mm/kasan/common.c:80 [inline]
__kasan_kmalloc mm/kasan/common.c:513 [inline]
__kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486
kasan_kmalloc+0x9/0x10 mm/kasan/common.c:527
__do_kmalloc mm/slab.c:3656 [inline]
__kmalloc+0x163/0x770 mm/slab.c:3665
kmalloc include/linux/slab.h:561 [inline]
tomoyo_realpath_from_path+0xc5/0x660 security/tomoyo/realpath.c:252
tomoyo_get_realpath security/tomoyo/file.c:151 [inline]
tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822
tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129
security_inode_getattr+0xf2/0x150 security/security.c:1222
vfs_getattr+0x25/0x70 fs/stat.c:115
vfs_statx_fd+0x71/0xc0 fs/stat.c:145
vfs_fstat include/linux/fs.h:3265 [inline]
__do_sys_newfstat+0x9b/0x120 fs/stat.c:378
__se_sys_newfstat fs/stat.c:375 [inline]
__x64_sys_newfstat+0x54/0x80 fs/stat.c:375
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 9389:
save_stack+0x23/0x90 mm/kasan/common.c:72
set_track mm/kasan/common.c:80 [inline]
kasan_set_free_info mm/kasan/common.c:335 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/common.c:474
kasan_slab_free+0xe/0x10 mm/kasan/common.c:483
__cache_free mm/slab.c:3426 [inline]
kfree+0x10a/0x2c0 mm/slab.c:3757
tomoyo_realpath_from_path+0x1a7/0x660 security/tomoyo/realpath.c:289
tomoyo_get_realpath security/tomoyo/file.c:151 [inline]
tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822
tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129
security_inode_getattr+0xf2/0x150 security/security.c:1222
vfs_getattr+0x25/0x70 fs/stat.c:115
vfs_statx_fd+0x71/0xc0 fs/stat.c:145
vfs_fstat include/linux/fs.h:3265 [inline]
__do_sys_newfstat+0x9b/0x120 fs/stat.c:378
__se_sys_newfstat fs/stat.c:375 [inline]
__x64_sys_newfstat+0x54/0x80 fs/stat.c:375
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8880a4932000
which belongs to the cache kmalloc-4k of size 4096
The buggy address is located 1025 bytes inside of
4096-byte region [ffff8880a4932000, ffff8880a4933000)
The buggy address belongs to the page:
page:ffffea0002924c80 refcount:1 mapcount:0 mapping:ffff8880aa402000 index:0x0 compound_mapcount: 0
raw: 00fffe0000010200 ffffea0002846208 ffffea00028f3888 ffff8880aa402000
raw: 0000000000000000 ffff8880a4932000 0000000100000001 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff8880a4932300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880a4932380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8880a4932400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8880a4932480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880a4932500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: b863ceb7ddce ("[NET]: Add macvlan driver")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-ungraft-prio'

Petr Machata says:

====================
When ungrafting from PRIO, replace child with FIFO

When a child Qdisc is removed from one of the PRIO Qdisc's bands, it is
replaced unconditionally by a NOOP qdisc. As a result, any traffic hitting
that band gets dropped. That is incorrect--no Qdisc was explicitly added
when PRIO was created, and after removal, none should have to be added
either.

In patch #2, this problem is fixed for PRIO by first attempting to create a
default Qdisc and only falling back to noop when that fails. This pattern
of attempting to create an invisible FIFO, using NOOP only as a fallback,
is also seen in some other Qdiscs.

The only driver currently offloading PRIO (and thus presumably the only one
impacted by this) is mlxsw. Therefore patch #1 extends mlxsw to handle the
replacement by an invisible FIFO gracefully.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: sch_prio: When ungrafting, replace with FIFO

When a child Qdisc is removed from one of the PRIO Qdisc's bands, it is
replaced unconditionally by a NOOP qdisc. As a result, any traffic hitting
that band gets dropped. That is incorrect--no Qdisc was explicitly added
when PRIO was created, and after removal, none should have to be added
either.

Fix PRIO by first attempting to create a default Qdisc and only falling
back to noop when that fails. This pattern of attempting to create an
invisible FIFO, using NOOP only as a fallback, is also seen in other
Qdiscs.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum_qdisc: Ignore grafting of invisible FIFO

The following patch will change PRIO to replace a removed Qdisc with an
invisible FIFO, instead of NOOP. mlxsw will see this replacement due to the
graft message that is generated. But because FIFO does not issue its own
REPLACE message, when the graft operation takes place, the Qdisc that mlxsw
tracks under the indicated band is still the old one. The child
handle (0:0) therefore does not match, and mlxsw rejects the graft
operation, which leads to an extack message:

Warning: Offloading graft operation failed.

Fix by ignoring the invisible children in the PRIO graft handler. The
DESTROY message of the removed Qdisc is going to follow shortly and handle
the removal.

Fixes: 32dc5efc6cb4 ("mlxsw: spectrum: qdiscs: prio: Handle graft command")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: Remove myself as co-maintainer for qcom-ethqos

As I am no longer with Linaro, I no longer have access to documentation
for this IP. The Linaro email will start bouncing soon.

Vinod is fully capable to maintain this driver by himself, therefore
remove myself as co-maintainer for qcom-ethqos.

Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

gtp: fix bad unlock balance in gtp_encap_enable_socket

WARNING: bad unlock balance detected!
5.5.0-rc5-syzkaller #0 Not tainted
-------------------------------------
syz-executor921/9688 is trying to release lock (sk_lock-AF_INET6) at:
[<ffffffff84bf8506>] gtp_encap_enable_socket+0x146/0x400 drivers/net/gtp.c:830
but there are no more locks to release!

other info that might help us debug this:
2 locks held by syz-executor921/9688:
#0: ffffffff8a4d8840 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:72 [inline]
#0: ffffffff8a4d8840 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x405/0xaf0 net/core/rtnetlink.c:5421
#1: ffff88809304b560 (slock-AF_INET6){+...}, at: spin_lock_bh include/linux/spinlock.h:343 [inline]
#1: ffff88809304b560 (slock-AF_INET6){+...}, at: release_sock+0x20/0x1c0 net/core/sock.c:2951

stack backtrace:
CPU: 0 PID: 9688 Comm: syz-executor921 Not tainted 5.5.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_unlock_imbalance_bug kernel/locking/lockdep.c:4008 [inline]
print_unlock_imbalance_bug.cold+0x114/0x123 kernel/locking/lockdep.c:3984
__lock_release kernel/locking/lockdep.c:4242 [inline]
lock_release+0x5f2/0x960 kernel/locking/lockdep.c:4503
sock_release_ownership include/net/sock.h:1496 [inline]
release_sock+0x17c/0x1c0 net/core/sock.c:2961
gtp_encap_enable_socket+0x146/0x400 drivers/net/gtp.c:830
gtp_encap_enable drivers/net/gtp.c:852 [inline]
gtp_newlink+0x9fc/0xc60 drivers/net/gtp.c:666
__rtnl_newlink+0x109e/0x1790 net/core/rtnetlink.c:3305
rtnl_newlink+0x69/0xa0 net/core/rtnetlink.c:3363
rtnetlink_rcv_msg+0x45e/0xaf0 net/core/rtnetlink.c:5424
netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0x58c/0x7d0 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:639 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:659
____sys_sendmsg+0x753/0x880 net/socket.c:2330
___sys_sendmsg+0x100/0x170 net/socket.c:2384
__sys_sendmsg+0x105/0x1d0 net/socket.c:2417
__do_sys_sendmsg net/socket.c:2426 [inline]
__se_sys_sendmsg net/socket.c:2424 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2424
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x445d49
Code: e8 bc b7 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 12 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f8019074db8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000006dac38 RCX: 0000000000445d49
RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003
RBP: 00000000006dac30 R08: 0000000000000004 R09: 0000000000000000
R10: 0000000000000008 R11: 0000000000000246 R12: 00000000006dac3c
R13: 00007ffea687f6bf R14: 00007f80190759c0 R15: 20c49ba5e353f7cf

Fixes: e198987e7dd7 ("gtp: fix suspicious RCU usage")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM

As diagnosed by Florian :

If TCA_FQ_QUANTUM is set to 0x80000000, fq_deueue()
can loop forever in :

if (f->credit <= 0) {
f->credit += q->quantum;
goto begin;
}

... because f->credit is either 0 or -2147483648.

Let's limit TCA_FQ_QUANTUM to no more than 1 << 20 :
This max value should limit risks of breaking user setups
while fixing this bug.

Fixes: afe4fd062416 ("pkt_sched: fq: Fair Queue packet scheduler")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Diagnosed-by: Florian Westphal <fw@strlen.de>
Reported-by: syzbot+dc9071cc5a85950bdfce@syzkaller.appspotmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: remove meaningless assignment in Makefile

There is no module named tipc_diag.

The assignment to tipc_diag-y has no effect.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: do not add socket.o to tipc-y twice

net/tipc/Makefile adds socket.o twice.

tipc-y += addr.o bcast.o bearer.o \
           core.o link.o discover.o msg.o  \
           name_distr.o  subscr.o monitor.o name_table.o net.o  \
           netlink.o netlink_compat.o node.o socket.o eth_media.o \
                                             ^^^^^^^^
           topsrv.o socket.o group.o trace.o
                    ^^^^^^^^

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: dwmac-sun8i: Allow all RGMII modes

Allow all the RGMII modes to be used. This would allow us to represent
the hardware better in the device tree with RGMII_ID where in most
cases the PHY's internal delay for both RX and TX are used.

Fixes: 9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: dwmac-sunxi: Allow all RGMII modes

Allow all the RGMII modes to be used. This would allow us to represent
the hardware better in the device tree with RGMII_ID where in most
cases the PHY's internal delay for both RX and TX are used.

Fixes: af0bd4e9ba80 ("net: stmmac: sunxi platform extensions for GMAC in Allwinner A20 SoC's")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'tpmdd-next-20200108' of git://git.infradead.org/users/jjs/linux-tpmdd

Pull more tpmd fixes from Jarkko Sakkinen:
"One critical regression fix (the faulty commit got merged in rc3, but
also marked for stable)"

* tag 'tpmdd-next-20200108' of git://git.infradead.org/users/jjs/linux-tpmdd:
tpm: Handle negative priv->response_len in tpm_common_read()

tpm: Handle negative priv->response_len in tpm_common_read()

The priv->response_length can hold the size of an response or an negative
error code, and the tpm_common_read() needs to handle both cases correctly.
Changed the type of response_length to signed and accounted for negative
value in tpm_common_read().

Cc: stable@vger.kernel.org
Fixes: d23d12484307 ("tpm: fix invalid locking in NONBLOCKING mode")
Reported-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

net: usb: lan78xx: fix possible skb leak

If skb_linearize() fails, we need to free the skb.

TSO makes skb bigger, and this bug might be the reason
Raspberry Pi 3B+ users had to disable TSO.

Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: RENARD Pierre-Francois <pfrenard@gmail.com>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: Fixed link does not need MDIO Bus

When using fixed link we don't need the MDIO bus support.

Reported-by: Heiko Stuebner <heiko@sntech.de>
Reported-by: kernelci.org bot <bot@kernelci.org>
Fixes: d3e014ec7d5e ("net: stmmac: platform: Fix MDIO init for platforms without PHY")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Acked-by: Sriram Dash <Sriram.dash@samsung.com>
Tested-by: Patrice Chotard <patrice.chotard@st.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail> # Lamobo R1 (fixed-link + MDIO sub node for roboswitch).
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'vlan-rtnetlink-newlink-fixes'

Eric Dumazet says:

====================
vlan: rtnetlink newlink fixes

First patch fixes a potential memory leak found by syzbot

Second patch makes vlan_changelink() aware of errors
and report them to user.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

vlan: vlan_changelink() should propagate errors

Both vlan_dev_change_flags() and vlan_dev_set_egress_priority()
can return an error. vlan_changelink() should not ignore them.

Fixes: 07b5b17e157b ("[VLAN]: Use rtnl_link API")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vlan: fix memory leak in vlan_dev_set_egress_priority

There are few cases where the ndo_uninit() handler might be not
called if an error happens while device is initialized.

Since vlan_newlink() calls vlan_changelink() before
trying to register the netdevice, we need to make sure
vlan_dev_uninit() has been called at least once,
or we might leak allocated memory.

BUG: memory leak
unreferenced object 0xffff888122a206c0 (size 32):
  comm "syz-executor511", pid 7124, jiffies 4294950399 (age 32.240s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 61 73 00 00 00 00 00 00 00 00  ......as........
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000000eb3bb85>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
    [<000000000eb3bb85>] slab_post_alloc_hook mm/slab.h:586 [inline]
    [<000000000eb3bb85>] slab_alloc mm/slab.c:3320 [inline]
    [<000000000eb3bb85>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3549
    [<000000007b99f620>] kmalloc include/linux/slab.h:556 [inline]
    [<000000007b99f620>] vlan_dev_set_egress_priority+0xcc/0x150 net/8021q/vlan_dev.c:194
    [<000000007b0cb745>] vlan_changelink+0xd6/0x140 net/8021q/vlan_netlink.c:126
    [<0000000065aba83a>] vlan_newlink+0x135/0x200 net/8021q/vlan_netlink.c:181
    [<00000000fb5dd7a2>] __rtnl_newlink+0x89a/0xb80 net/core/rtnetlink.c:3305
    [<00000000ae4273a1>] rtnl_newlink+0x4e/0x80 net/core/rtnetlink.c:3363
    [<00000000decab39f>] rtnetlink_rcv_msg+0x178/0x4b0 net/core/rtnetlink.c:5424
    [<00000000accba4ee>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477
    [<00000000319fe20f>] rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442
    [<00000000d51938dc>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
    [<00000000d51938dc>] netlink_unicast+0x223/0x310 net/netlink/af_netlink.c:1328
    [<00000000e539ac79>] netlink_sendmsg+0x2c0/0x570 net/netlink/af_netlink.c:1917
    [<000000006250c27e>] sock_sendmsg_nosec net/socket.c:639 [inline]
    [<000000006250c27e>] sock_sendmsg+0x54/0x70 net/socket.c:659
    [<00000000e2a156d1>] ____sys_sendmsg+0x2d0/0x300 net/socket.c:2330
    [<000000008c87466e>] ___sys_sendmsg+0x8a/0xd0 net/socket.c:2384
    [<00000000110e3054>] __sys_sendmsg+0x80/0xf0 net/socket.c:2417
    [<00000000d71077c8>] __do_sys_sendmsg net/socket.c:2426 [inline]
    [<00000000d71077c8>] __se_sys_sendmsg net/socket.c:2424 [inline]
    [<00000000d71077c8>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2424

Fixe: 07b5b17e157b ("[VLAN]: Use rtnl_link API")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./pub/scm/linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2020-01-07

The following pull-request contains BPF updates for your *net* tree.

We've added 2 non-merge commits during the last 1 day(s) which contain
a total of 2 files changed, 16 insertions(+), 4 deletions(-).

The main changes are:

1) Fix a use-after-free in cgroup BPF due to auto-detachment, from Roman Gushchin.

2) Fix skb out-of-bounds access in ld_abs/ind instruction, from Daniel Borkmann.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

stmmac: debugfs entry name is not be changed when udev rename device name.

Add one notifier for udev changes net device name.
Fixes: b6601323ef9e ("net: stmmac: debugfs entry name is not be changed when udev rename")

Signed-off-by: Jiping Ma <jiping.ma2@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

i40iw: Remove setting of VMA private data and use rdma_user_mmap_io

vm_ops is now initialized in ib_uverbs_mmap() with the recent rdma mmap
API changes. Earlier it was done in rdma_umap_priv_init() which would not
be called unless a driver called rdma_user_mmap_io() in its mmap.

i40iw does not use the rdma_user_mmap_io API but sets the vma's
vm_private_data to a driver object. This now conflicts with the vm_op
rdma_umap_close as priv pointer points to the i40iw driver object instead
of the private data setup by core when rdma_user_mmap_io is called.  This
leads to a crash in rdma_umap_close with a mmap put being called when it
should not have.

Remove the redundant setting of the vma private_data in i40iw as it is not
used. Also move i40iw over to use the rdma_user_mmap_io API. This gives
the extra protection of having the mappings zapped when the context is
detsroyed.

  BUG: unable to handle page fault for address: 0000000100000001
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD 0 P4D 0
  Oops: 0002 [#1] SMP PTI
  CPU: 6 PID: 9528 Comm: rping Kdump: loaded Not tainted 5.5.0-rc4+ #117
  Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Q87M-D2H, BIOS F7 01/17/2014
  RIP: 0010:rdma_user_mmap_entry_put+0xa/0x30 [ib_core]
  RSP: 0018:ffffb340c04c7c38 EFLAGS: 00010202
  RAX: 00000000ffffffff RBX: ffff9308e7be2a00 RCX: 000000000000cec0
  RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000100000001
  RBP: ffff9308dc7641f0 R08: 0000000000000001 R09: 0000000000000000
  R10: 0000000000000001 R11: ffffffff8d4414d8 R12: ffff93075182c780
  R13: 0000000000000001 R14: ffff93075182d2a8 R15: ffff9308e2ddc840
  FS:  0000000000000000(0000) GS:ffff9308fdc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000100000001 CR3: 00000002e0412004 CR4: 00000000001606e0
  Call Trace:
   rdma_umap_close+0x40/0x90 [ib_uverbs]
   remove_vma+0x43/0x80
   exit_mmap+0xfd/0x1b0
   mmput+0x6e/0x130
   do_exit+0x290/0xcc0
   ? get_signal+0x152/0xc40
   do_group_exit+0x46/0xc0
   get_signal+0x1bd/0xc40
   ? prepare_to_wait_event+0x97/0x190
   do_signal+0x36/0x630
   ? remove_wait_queue+0x60/0x60
   ? __audit_syscall_exit+0x1d9/0x290
   ? rcu_read_lock_sched_held+0x52/0x90
   ? kfree+0x21c/0x2e0
   exit_to_usermode_loop+0x4f/0xc3
   do_syscall_64+0x1ed/0x270
   entry_SYSCALL_64_after_hwframe+0x49/0xbe
  RIP: 0033:0x7fae715a81fd
  Code: Bad RIP value.
  RSP: 002b:00007fae6e163cb0 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
  RAX: fffffffffffffe00 RBX: 00007fae6e163d30 RCX: 00007fae715a81fd
  RDX: 0000000000000010 RSI: 00007fae6e163cf0 RDI: 0000000000000003
  RBP: 00000000013413a0 R08: 00007fae68000000 R09: 0000000000000017
  R10: 0000000000000001 R11: 0000000000000293 R12: 00007fae680008c0
  R13: 00007fae6e163cf0 R14: 00007fae717c9804 R15: 00007fae6e163ed0
  CR2: 0000000100000001
  ---[ end trace b33d58d3a06782cb ]---
  RIP: 0010:rdma_user_mmap_entry_put+0xa/0x30 [ib_core]

Fixes: b86deba977a9 ("RDMA/core: Move core content from ib_uverbs to ib_core")
Link: https://lore.kernel.org/r/20200107162223.1745-1-shiraz.saleem@intel.com
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

drm/amdgpu: add DRIVER_SYNCOBJ_TIMELINE to amdgpu

Can expose it now that the khronos has exposed the
vlk extension.

Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/display: Reduce HDMI pixel encoding if max clock is exceeded

For high-res (8K) or HFR (4K120) displays, using uncompressed pixel
formats like YCbCr444 would exceed the bandwidth of HDMI 2.0, so the
"interesting" modes would be disabled, leaving only low-res or low
framerate modes.

This change lowers the pixel encoding to 4:2:2 or 4:2:0 if the max TMDS
clock is exceeded. Verified that 8K30 and 4K120 are now available and
working with a Samsung Q900R over an HDMI 2.0b link from a Radeon 5700.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Thomas Anderson <thomasanderson@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu: Set no-retry as default."

This reverts commit 51bfac71cade386966791a8db87a5912781d249f.

This causes stability issues on some raven boards. Revert
for now until a proper fix is completed.

Bug: https://gitlab.freedesktop.org/drm/amd/issues/934
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206017
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/fb-helper: Round up bits_per_pixel if possible

When userspace requests a video mode parameter value that is not
supported, frame buffer device drivers should round it up to a supported
value, if possible, instead of just rejecting it. This allows
applications to quickly scan for supported video modes.

Currently this rule is not followed for the number of bits per pixel,
causing e.g. "fbset -depth N" to fail, if N is smaller than the current
number of bits per pixel.

Fix this by returning an error only if bits per pixel is too large, and
setting it to the current value otherwise.

See also Documentation/fb/framebuffer.rst, Section 2 (Programmer's View
of /dev/fb*").

Fixes: 865afb11949e5bf4 ("drm/fb-helper: reject any changes to the fbdev")
Cc: stable@vger.kernel.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191230132734.4538-1-geert+renesas@glider.be

drm/sun4i: tcon: Set RGB DCLK min. divider based on hardware model

In commit 0b8e7bbde5e7 ("drm/sun4i: tcon: Set min division of TCON0_DCLK
to 1.") it was assumed that all TCON variants support a minimum divider
of 1 if only DCLK was used.

However, the oldest generation of hardware only supports minimum divider
of 4 if only DCLK is used. If a divider of 1 was used on this old
hardware, some scrolling artifact would appear. A divider of 2 seemed
OK, but a divider of 3 had artifacts as well.

Set the minimum divider when outputing to parallel RGB based on the
hardware model, with a minimum of 4 for the oldest (A10/A10s/A13/A20)
hardware, and a minimum of 1 for the rest. A value is not set for the
TCON variants lacking channel 0.

This fixes the scrolling artifacts seen on my A13 tablet.

Fixes: 0b8e7bbde5e7 ("drm/sun4i: tcon: Set min division of TCON0_DCLK to 1.")
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107070113.28951-1-wens@kernel.org

drm/i915/dp: Disable Port sync mode correctly on teardown

While clearing the Ports ync mode enable and master select bits
we need to clear the register completely instead of using disable masks

v3:
* Remove reg variable (Matt)
v2:
* Just write 0 to the reg (Ville)
* Rebase

Bugzilla: https://gitlab.freedesktop.org/drm/intel/issues/5
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Fixes: 51528afe7c5e ("drm/i915/display/icl: Disable transcoder port sync as part of crtc_disable() sequence")
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191228031204.10189-3-manasi.d.navare@intel.com
(cherry picked from commit a3d9382bd439e7be1858abc3d5f014dd55913448)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Add Wa_1407352427:icl,ehl

The workaround database now indicates we need to disable psdunit clock
gating as well.

v3:
- Rebase on top of other workarounds that have landed.
- Restrict cc:stable tag to 5.2+ since that's when ICL was first
officially supported.

Bspec: 32354
Bspec: 33450
Bspec: 33451
Suggested-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: stable@vger.kernel.org # v5.2+
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191231190713.1549533-1-matthew.d.roper@intel.com
(cherry picked from commit 1cd21a7c5679015352e8a6f46813aced51d71bb8)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Add Wa_1408615072 and Wa_1407596294 to icl,ehl

Workaround database indicates we should disable clock gating of both the
vsunit and hsunit.

Bspec: 33450
Bspec: 33451
Cc: stable@kernel.vger.org
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224012026.3157766-3-matthew.d.roper@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit b9cf9dac3dac4c1d2a47d34f30ec53c0423cecf8)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/gt: Restore coarse power gating

The coarse power gating was disabled as part of commit 2248a28384fe
("drm/i915/gen8+: Add RC6 CTX corruption WA") as a prelude to recover
from the context corruption; the power gating itself has no direct
impact on the RC6 context corruption. However, that recovery scheme was
never implemented due to difficult corner cases, and so we no longer need
to keep the power gating disabled.

Fixes: 2248a28384fe ("drm/i915/gen8+: Add RC6 CTX corruption WA")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/846
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191231122708.4025916-1-chris@chris-wilson.co.uk
(cherry picked from commit 32f408ac3e5d95781f52328a09e5409b01255841)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/gt: Do not restore invalid RS state

Only restore valid resource streamer state from the context image, i.e.
avoid restoring if we know the image is invalid.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/446
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191229183153.3719869-4-chris@chris-wilson.co.uk
Cc: stable@vger.kernel.org
(cherry picked from commit ecfcd2da335816516dc27434a65899a77886d80a)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism

On some laptops enabling wakeup on the GPIO interrupts used for ACPI _AEI
event handling causes spurious wakeups.

This commit adds a new honor_wakeup option, defaulting to true (our current
behavior), which can be used to disable wakeup on troublesome hardware
to avoid these spurious wakeups.

This is a workaround for an architectural problem with s2idle under Linux
where we do not have any mechanism to immediately go back to sleep after
wakeup events, other then for embedded-controller events using the standard
ACPI EC interface, for details see:
https://lore.kernel.org/linux-acpi/61450f9b-cbc6-0c09-8b3a-aff6bf9a0b3c@redhat.com/

One series of laptops which is not able to suspend without this workaround
is the HP x2 10 Cherry Trail models, this commit adds a DMI based quirk
which makes sets honor_wakeup to false on these models.

Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200105160357.97154-3-hdegoede@redhat.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpiolib: acpi: Turn dmi_system_id table into a generic quirk table

Turn the existing run_edge_events_on_boot_blacklist dmi_system_id table
into a generic quirk table, storing the quirks in the driver_data ptr.

This is a preparation patch for adding other types of (DMI based) quirks.

Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200105160357.97154-2-hdegoede@redhat.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

drm/i915: Limit audio CDCLK>=2*BCLK constraint back to GLK only

Revert changes done in commit f6ec9483091f ("drm/i915: extend audio
CDCLK>=2*BCLK constraint to more platforms"). Audio drivers
communicate with i915 over HDA bus multiple times during system
boot-up and each of these transactions result in matching
get_power/put_power calls to i915, and depending on the platform,
a modeset change causing visible flicker.

GLK is the only platform with minimum CDCLK significantly lower
than BCLK, and thus for GLK setting a higher CDCLK is mandatory.

For other platforms, minimum CDCLK is close but below 2*BCLK
(e.g. on ICL, CDCLK=176.4kHz with BCLK=96kHz). Spec-wise the constraint
should be set, but in practise no communication errors have been
reported and the downside if set is the flicker observed at boot-time.

Revert to old behaviour until better mechanism to manage
probe-time clocks is available.

The full CDCLK>=2*BCLK constraint is still enforced at pipe
enable time in intel_crtc_compute_min_cdclk().

Bugzilla: https://gitlab.freedesktop.org/drm/intel/issues/913
Fixes: f6ec9483091f ("drm/i915: extend audio CDCLK>=2*BCLK constraint to more platforms")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191231140007.31728-1-kai.vehmanen@linux.intel.com
(cherry picked from commit 1ee48a61aa57dbdbc3cd2808d8b28df40d938e44)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/gt: Mark up virtual engine uabi_instance

Be sure to initialise the uabi_instance on the virtual engine to the
special invalid value, just in case we ever peek at it from the uAPI.

Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 750e76b4f9f6 ("drm/i915/gt: Move the [class][inst] lookup for engines onto the GT")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106123921.2543886-1-chris@chris-wilson.co.uk
(cherry picked from commit f75fc37b5e70b75f21550410f88e2379648120e2)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

gpio: zynq: Fix for bug in zynq_gpio_restore_context API

This patch writes the inverse value of Interrupt Mask Status
register into the Interrupt Enable register in
zynq_gpio_restore_context API to fix the bug.

Fixes: e11de4de28c0 ("gpio: zynq: Add support for suspend resume")
Signed-off-by: Swapna Manupati <swapna.manupati@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Link: https://lore.kernel.org/r/1577362338-28744-2-git-send-email-srinivas.neeli@xilinx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: meson: Fix wrong shift value when get drive-strength

In meson_pinconf_get_drive_strength, variable bit is calculated by
meson_calc_reg_and_bit, this value is the offset from the first pin of a
certain bank to current pin, while Meson SoCs use two bits for each pin
to depict drive-strength. So a left shift by 1 should be done or node
pinconf-pins shows wrong message.

Fixes: 6ea3e3bbef37 ("pinctrl: meson: add support of drive-strength-microamp")

Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Link: https://lore.kernel.org/r/20191226023734.9631-1-qianggui.song@amlogic.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: lochnagar: select GPIOLIB

In a rare randconfig build I came across one configuration that does
not enable CONFIG_GPIOLIB, which is needed by lochnagar:

ERROR: "devm_gpiochip_add_data" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined!
ERROR: "gpiochip_generic_free" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined!
ERROR: "gpiochip_generic_request" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined!
ERROR: "gpiochip_get_data" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined!

Add another 'select' like all other pinctrl drivers have.

Fixes: 0548448b719a ("pinctrl: lochnagar: Add support for the Cirrus Logic Lochnagar")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20191218163701.171914-1-arnd@arndb.de
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'mlx5-fixes-2020-01-06' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2020-01-06

This series introduces some fixes to mlx5 driver.

Please pull and let me know if there is any problem.

For -stable v5.3
('net/mlx5: Move devlink registration before interfaces load')

For -stable v5.4
('net/mlx5e: Fix hairpin RSS table size')
('net/mlx5: DR, Init lists that are used in rule's member')
('net/mlx5e: Always print health reporter message to dmesg')
('net/mlx5: DR, No need for atomic refcount for internal SW steering resources')
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'trace-v5.5-rc5' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
"Various tracing fixes:

   - kbuild found missing define of MCOUNT_INSN_SIZE for various build
     configs

   - Initialize variable to zero as gcc thinks it is used undefined (it
     really isn't but the code is subtle enough that this doesn't hurt)

   - Convert from do_div() to div64_ull() to prevent potential divide by
     zero

   - Unregister a trace point on error path in sched_wakeup tracer

   - Use signed offset for archs that can have stext not be first

   - A simple indentation fix (whitespace error)"

* tag 'trace-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix indentation issue
  kernel/trace: Fix do not unregister tracepoints when register sched_migrate_task fail
  tracing: Change offset type to s32 in preempt/irq tracepoints
  ftrace: Avoid potential division by zero in function profiler
  tracing: Have stack tracer compile when MCOUNT_INSN_SIZE is not defined
  tracing: Define MCOUNT_INSN_SIZE when not defined without direct calls
  tracing: Initialize val to zero in parse_entry of inject code

net/mlx5: DR, Init lists that are used in rule's member

Whenever adding new member of rule object we attach it to 2 lists,
These 2 lists should be initialized first.

Fixes: 41d07074154c ("net/mlx5: DR, Expose steering rule functionality")
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Fix hairpin RSS table size

Set hairpin table size to the corret size, based on the groups that
would be created in it. Groups are laid out on the table such that a
group occupies a range of entries in the table. This implies that the
group ranges should have correspondence to the table they are laid upon.

The patch cited below made group 1's size to grow hence causing
overflow of group range laid on the table.

Fixes: a795d8db2a6d ("net/mlx5e: Support RSS for IP-in-IP and IPv6 tunneled packets")
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: DR, No need for atomic refcount for internal SW steering resources

No need for an atomic refcounter for the STE and hashtables.
These are internal SW steering resources and they are always
under domain mutex.

This also fixes the following refcount error:
  refcount_t: addition on 0; use-after-free.
  WARNING: CPU: 9 PID: 3527 at lib/refcount.c:25 refcount_warn_saturate+0x81/0xe0
  Call Trace:
   dr_table_init_nic+0x10d/0x110 [mlx5_core]
   mlx5dr_table_create+0xb4/0x230 [mlx5_core]
   mlx5_cmd_dr_create_flow_table+0x39/0x120 [mlx5_core]
   __mlx5_create_flow_table+0x221/0x5f0 [mlx5_core]
   esw_create_offloads_fdb_tables+0x180/0x5a0 [mlx5_core]
   ...

Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Revert "net/mlx5: Support lockless FTE read lookups"

This reverts commit 7dee607ed0e04500459db53001d8e02f8831f084.

During cleanup path, FTE's parent node group is removed which is
referenced by the FTE while freeing the FTE.
Hence FTE's lockless read lookup optimization done in cited commit is
not possible at the moment.

Hence, revert the commit.

This avoid below KAZAN call trace.

[  110.390896] BUG: KASAN: use-after-free in find_root.isra.14+0x56/0x60
[mlx5_core]
[  110.391048] Read of size 4 at addr ffff888c19e6d220 by task
swapper/12/0

[  110.391219] CPU: 12 PID: 0 Comm: swapper/12 Not tainted 5.5.0-rc1+
[  110.391222] Hardware name: HP ProLiant DL380p Gen8, BIOS P70
08/02/2014
[  110.391225] Call Trace:
[  110.391229]  <IRQ>
[  110.391246]  dump_stack+0x95/0xd5
[  110.391307]  ? find_root.isra.14+0x56/0x60 [mlx5_core]
[  110.391320]  print_address_description.constprop.5+0x20/0x320
[  110.391379]  ? find_root.isra.14+0x56/0x60 [mlx5_core]
[  110.391435]  ? find_root.isra.14+0x56/0x60 [mlx5_core]
[  110.391441]  __kasan_report+0x149/0x18c
[  110.391499]  ? find_root.isra.14+0x56/0x60 [mlx5_core]
[  110.391504]  kasan_report+0x12/0x20
[  110.391511]  __asan_report_load4_noabort+0x14/0x20
[  110.391567]  find_root.isra.14+0x56/0x60 [mlx5_core]
[  110.391625]  del_sw_fte_rcu+0x4a/0x100 [mlx5_core]
[  110.391633]  rcu_core+0x404/0x1950
[  110.391640]  ? rcu_accelerate_cbs_unlocked+0x100/0x100
[  110.391649]  ? run_rebalance_domains+0x201/0x280
[  110.391654]  rcu_core_si+0xe/0x10
[  110.391661]  __do_softirq+0x181/0x66c
[  110.391670]  irq_exit+0x12c/0x150
[  110.391675]  smp_apic_timer_interrupt+0xf0/0x370
[  110.391681]  apic_timer_interrupt+0xf/0x20
[  110.391684]  </IRQ>
[  110.391695] RIP: 0010:cpuidle_enter_state+0xfa/0xba0
[  110.391703] Code: 3d c3 9b b5 50 e8 56 75 6e fe 48 89 45 c8 0f 1f 44
00 00 31 ff e8 a6 94 6e fe 45 84 ff 0f 85 f6 02 00 00 fb 66 0f 1f 44 00
00 <45> 85 f6 0f 88 db 06 00 00 4d 63 fe 4b 8d 04 7f 49 8d 04 87 49 8d
[  110.391706] RSP: 0018:ffff888c23a6fce8 EFLAGS: 00000246 ORIG_RAX:
ffffffffffffff13
[  110.391712] RAX: dffffc0000000000 RBX: ffffe8ffff7002f8 RCX:
000000000000001f
[  110.391715] RDX: 1ffff11184ee6cb5 RSI: 0000000040277d83 RDI:
ffff888c277365a8
[  110.391718] RBP: ffff888c23a6fd40 R08: 0000000000000002 R09:
0000000000035280
[  110.391721] R10: ffff888c23a6fc80 R11: ffffed11847485d0 R12:
ffffffffb1017740
[  110.391723] R13: 0000000000000003 R14: 0000000000000003 R15:
0000000000000000
[  110.391732]  ? cpuidle_enter_state+0xea/0xba0
[  110.391738]  cpuidle_enter+0x4f/0xa0
[  110.391747]  call_cpuidle+0x6d/0xc0
[  110.391752]  do_idle+0x360/0x430
[  110.391758]  ? arch_cpu_idle_exit+0x40/0x40
[  110.391765]  ? complete+0x67/0x80
[  110.391771]  cpu_startup_entry+0x1d/0x20
[  110.391779]  start_secondary+0x2f3/0x3c0
[  110.391784]  ? set_cpu_sibling_map+0x2500/0x2500
[  110.391795]  secondary_startup_64+0xa4/0xb0

[  110.391841] Allocated by task 290:
[  110.391917]  save_stack+0x21/0x90
[  110.391921]  __kasan_kmalloc.constprop.8+0xa7/0xd0
[  110.391925]  kasan_kmalloc+0x9/0x10
[  110.391929]  kmem_cache_alloc_trace+0xf6/0x270
[  110.391987]  create_root_ns.isra.36+0x58/0x260 [mlx5_core]
[  110.392044]  mlx5_init_fs+0x5fd/0x1ee0 [mlx5_core]
[  110.392092]  mlx5_load_one+0xc7a/0x3860 [mlx5_core]
[  110.392139]  init_one+0x6ff/0xf90 [mlx5_core]
[  110.392145]  local_pci_probe+0xde/0x190
[  110.392150]  work_for_cpu_fn+0x56/0xa0
[  110.392153]  process_one_work+0x678/0x1140
[  110.392157]  worker_thread+0x573/0xba0
[  110.392162]  kthread+0x341/0x400
[  110.392166]  ret_from_fork+0x1f/0x40

[  110.392218] Freed by task 2742:
[  110.392288]  save_stack+0x21/0x90
[  110.392292]  __kasan_slab_free+0x137/0x190
[  110.392296]  kasan_slab_free+0xe/0x10
[  110.392299]  kfree+0x94/0x250
[  110.392357]  tree_put_node+0x257/0x360 [mlx5_core]
[  110.392413]  tree_remove_node+0x63/0xb0 [mlx5_core]
[  110.392469]  clean_tree+0x199/0x240 [mlx5_core]
[  110.392525]  mlx5_cleanup_fs+0x76/0x580 [mlx5_core]
[  110.392572]  mlx5_unload+0x22/0xc0 [mlx5_core]
[  110.392619]  mlx5_unload_one+0x99/0x260 [mlx5_core]
[  110.392666]  remove_one+0x61/0x160 [mlx5_core]
[  110.392671]  pci_device_remove+0x10b/0x2c0
[  110.392677]  device_release_driver_internal+0x1e4/0x490
[  110.392681]  device_driver_detach+0x36/0x40
[  110.392685]  unbind_store+0x147/0x200
[  110.392688]  drv_attr_store+0x6f/0xb0
[  110.392693]  sysfs_kf_write+0x127/0x1d0
[  110.392697]  kernfs_fop_write+0x296/0x420
[  110.392702]  __vfs_write+0x66/0x110
[  110.392707]  vfs_write+0x1a0/0x500
[  110.392711]  ksys_write+0x164/0x250
[  110.392715]  __x64_sys_write+0x73/0xb0
[  110.392720]  do_syscall_64+0x9f/0x3a0
[  110.392725]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 7dee607ed0e0 ("net/mlx5: Support lockless FTE read lookups")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: Move devlink registration before interfaces load

Register devlink before interfaces are added.
This will allow interfaces to use devlink while initalizing. For example,
call mlx5_is_roce_enabled.

Fixes: aba25279c100 ("net/mlx5e: Add TX reporter support")
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Always print health reporter message to dmesg

In case a reporter exists, error message is logged only to the devlink
tracer. The devlink tracer is a visibility utility only, which user can
choose not to monitor.
After cited patch, 3rd party monitoring tools that tracks these error
message will no longer find them in dmesg, causing a regression.

With this patch, error messages are also logged into the dmesg.

Fixes: c50de4af1d63 ("net/mlx5e: Generalize tx reporter's functionality")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Avoid duplicating rule destinations

Following scenario easily break driver logic and crash the kernel:
1. Add rule with mirred actions to same device.
2. Delete this rule.
In described scenario rule is not added to database and on deletion
driver access invalid entry.
Example:

$ tc filter add dev ens1f0_0 ingress protocol ip prio 1 \
       flower skip_sw \
       action mirred egress mirror dev ens1f0_1 pipe \
       action mirred egress redirect dev ens1f0_1
$ tc filter del dev ens1f0_0 ingress protocol ip prio 1

Dmesg output:

[  376.634396] mlx5_core 0000:82:00.0: mlx5_cmd_check:756:(pid 3439): DESTROY_FLOW_GROUP(0x934) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x563e2f)
[  376.654983] mlx5_core 0000:82:00.0: del_hw_flow_group:567:(pid 3439): flow steering can't destroy fg 89 of ft 3145728
[  376.673433] kasan: CONFIG_KASAN_INLINE enabled
[  376.683769] kasan: GPF could be caused by NULL-ptr deref or user memory access
[  376.695229] general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI
[  376.705069] CPU: 7 PID: 3439 Comm: tc Not tainted 5.4.0-rc5+ #76
[  376.714959] Hardware name: Supermicro SYS-2028TP-DECTR/X10DRT-PT, BIOS 2.0a 08/12/2016
[  376.726371] RIP: 0010:mlx5_del_flow_rules+0x105/0x960 [mlx5_core]
[  376.735817] Code: 01 00 00 00 48 83 eb 08 e8 28 d9 ff ff 4c 39 e3 75 d8 4c 8d bd c0 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 84 04 00 00 48 8d 7d 28 8b 9 d
[  376.761261] RSP: 0018:ffff888847c56db8 EFLAGS: 00010202
[  376.770054] RAX: dffffc0000000000 RBX: ffff8888582a6da0 RCX: ffff888847c56d60
[  376.780743] RDX: 0000000000000058 RSI: 0000000000000008 RDI: 0000000000000282
[  376.791328] RBP: 0000000000000000 R08: fffffbfff0c60ea6 R09: fffffbfff0c60ea6
[  376.802050] R10: fffffbfff0c60ea5 R11: ffffffff8630752f R12: ffff8888582a6da0
[  376.812798] R13: dffffc0000000000 R14: ffff8888582a6da0 R15: 00000000000002c0
[  376.823445] FS:  00007f675f9a8840(0000) GS:ffff88886d200000(0000) knlGS:0000000000000000
[  376.834971] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  376.844179] CR2: 00000000007d9640 CR3: 00000007d3f26003 CR4: 00000000001606e0
[  376.854843] Call Trace:
[  376.868542]  __mlx5_eswitch_del_rule+0x49/0x300 [mlx5_core]
[  376.877735]  mlx5e_tc_del_fdb_flow+0x6ec/0x9e0 [mlx5_core]
[  376.921549]  mlx5e_flow_put+0x2b/0x50 [mlx5_core]
[  376.929813]  mlx5e_delete_flower+0x5b6/0xbd0 [mlx5_core]
[  376.973030]  tc_setup_cb_reoffload+0x29/0xc0
[  376.980619]  fl_reoffload+0x50a/0x770 [cls_flower]
[  377.015087]  tcf_block_playback_offloads+0xbd/0x250
[  377.033400]  tcf_block_setup+0x1b2/0xc60
[  377.057247]  tcf_block_offload_cmd+0x195/0x240
[  377.098826]  tcf_block_offload_unbind+0xe7/0x180
[  377.107056]  __tcf_block_put+0xe5/0x400
[  377.114528]  ingress_destroy+0x3d/0x60 [sch_ingress]
[  377.122894]  qdisc_destroy+0xf1/0x5a0
[  377.129993]  qdisc_graft+0xa3d/0xe50
[  377.151227]  tc_get_qdisc+0x48e/0xa20
[  377.165167]  rtnetlink_rcv_msg+0x35d/0x8d0
[  377.199528]  netlink_rcv_skb+0x11e/0x340
[  377.219638]  netlink_unicast+0x408/0x5b0
[  377.239913]  netlink_sendmsg+0x71b/0xb30
[  377.267505]  sock_sendmsg+0xb1/0xf0
[  377.273801]  ___sys_sendmsg+0x635/0x900
[  377.312784]  __sys_sendmsg+0xd3/0x170
[  377.338693]  do_syscall_64+0x95/0x460
[  377.344833]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  377.352321] RIP: 0033:0x7f675e58e090

To avoid this, for every mirred action check if output device was
already processed. If so - drop rule with EOPNOTSUPP error.

Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

gpio: max77620: Add missing dependency on GPIOLIB_IRQCHIP

Driver fails to compile in a minimized kernel's configuration because of
the missing dependency on GPIOLIB_IRQCHIP.

error: ‘struct gpio_chip’ has no member named ‘irq’
44 | virq = irq_find_mapping(gpio->gpio_chip.irq.domain, offset);

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200106015154.12040-1-digetx@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'tpmdd-next-20200106' of git://git.infradead.org/users/jjs/linux-tpmdd

Pull tpmd fixes from Jarkko Sakkinen:
"There has been a bunch of reports (e.g. [*]) reporting that when
  commit 5b359c7c4372 ("tpm_tis_core: Turn on the TPM before probing
  IRQ's") and subsequent fixes are applied it causes boot freezes on
  some machines.

  Unfortunately hardware where this causes a failure is not widely
  available (only one I'm aware is Lenovo T490), which means we cannot
  predict yet how long it will take to properly fix tpm_tis interrupt
  probing.

  Thus, the least worst short term action is to revert the code to the
  state before this commit. In long term we need fix the tpm_tis probing
  code to work on machines that Stefan's patches were supposed to fix.

  With these patches reverted nothing fatal happens, TPM is fallbacked
  to be used in polling mode (which is not in the end too bad because
  there are no high throughput workloads for TPM).

  [*] https://bugzilla.kernel.org/show_bug.cgi?id=205935"

* tag 'tpmdd-next-20200106' of git://git.infradead.org/users/jjs/linux-tpmdd:
  tpm: Revert "tpm_tis_core: Turn on the TPM before probing IRQ's"
  tpm: Revert "tpm_tis_core: Set TPM_CHIP_FLAG_IRQ before probing for interrupts"
  tpm: Revert "tpm_tis: reserve chip for duration of tpm_tis_core_init"

bpf: Fix passing modified ctx to ld/abs/ind instruction

Anatoly has been fuzzing with kBdysch harness and reported a KASAN
slab oob in one of the outcomes:

  [...]
  [   77.359642] BUG: KASAN: slab-out-of-bounds in bpf_skb_load_helper_8_no_cache+0x71/0x130
  [   77.360463] Read of size 4 at addr ffff8880679bac68 by task bpf/406
  [   77.361119]
  [   77.361289] CPU: 2 PID: 406 Comm: bpf Not tainted 5.5.0-rc2-xfstests-00157-g2187f215eba #1
  [   77.362134] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
  [   77.362984] Call Trace:
  [   77.363249]  dump_stack+0x97/0xe0
  [   77.363603]  print_address_description.constprop.0+0x1d/0x220
  [   77.364251]  ? bpf_skb_load_helper_8_no_cache+0x71/0x130
  [   77.365030]  ? bpf_skb_load_helper_8_no_cache+0x71/0x130
  [   77.365860]  __kasan_report.cold+0x37/0x7b
  [   77.366365]  ? bpf_skb_load_helper_8_no_cache+0x71/0x130
  [   77.366940]  kasan_report+0xe/0x20
  [   77.367295]  bpf_skb_load_helper_8_no_cache+0x71/0x130
  [   77.367821]  ? bpf_skb_load_helper_8+0xf0/0xf0
  [   77.368278]  ? mark_lock+0xa3/0x9b0
  [   77.368641]  ? kvm_sched_clock_read+0x14/0x30
  [   77.369096]  ? sched_clock+0x5/0x10
  [   77.369460]  ? sched_clock_cpu+0x18/0x110
  [   77.369876]  ? bpf_skb_load_helper_8+0xf0/0xf0
  [   77.370330]  ___bpf_prog_run+0x16c0/0x28f0
  [   77.370755]  __bpf_prog_run32+0x83/0xc0
  [   77.371153]  ? __bpf_prog_run64+0xc0/0xc0
  [   77.371568]  ? match_held_lock+0x1b/0x230
  [   77.371984]  ? rcu_read_lock_held+0xa1/0xb0
  [   77.372416]  ? rcu_is_watching+0x34/0x50
  [   77.372826]  sk_filter_trim_cap+0x17c/0x4d0
  [   77.373259]  ? sock_kzfree_s+0x40/0x40
  [   77.373648]  ? __get_filter+0x150/0x150
  [   77.374059]  ? skb_copy_datagram_from_iter+0x80/0x280
  [   77.374581]  ? do_raw_spin_unlock+0xa5/0x140
  [   77.375025]  unix_dgram_sendmsg+0x33a/0xa70
  [   77.375459]  ? do_raw_spin_lock+0x1d0/0x1d0
  [   77.375893]  ? unix_peer_get+0xa0/0xa0
  [   77.376287]  ? __fget_light+0xa4/0xf0
  [   77.376670]  __sys_sendto+0x265/0x280
  [   77.377056]  ? __ia32_sys_getpeername+0x50/0x50
  [   77.377523]  ? lock_downgrade+0x350/0x350
  [   77.377940]  ? __sys_setsockopt+0x2a6/0x2c0
  [   77.378374]  ? sock_read_iter+0x240/0x240
  [   77.378789]  ? __sys_socketpair+0x22a/0x300
  [   77.379221]  ? __ia32_sys_socket+0x50/0x50
  [   77.379649]  ? mark_held_locks+0x1d/0x90
  [   77.380059]  ? trace_hardirqs_on_thunk+0x1a/0x1c
  [   77.380536]  __x64_sys_sendto+0x74/0x90
  [   77.380938]  do_syscall_64+0x68/0x2a0
  [   77.381324]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  [   77.381878] RIP: 0033:0x44c070
  [...]

After further debugging, turns out while in case of other helper functions
we disallow passing modified ctx, the special case of ld/abs/ind instruction
which has similar semantics (except r6 being the ctx argument) is missing
such check. Modified ctx is impossible here as bpf_skb_load_helper_8_no_cache()
and others are expecting skb fields in original position, hence, add
check_ctx_reg() to reject any modified ctx. Issue was first introduced back
in f1174f77b50c ("bpf/verifier: rework value tracking").

Fixes: f1174f77b50c ("bpf/verifier: rework value tracking")
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200106215157.3553-1-daniel@iogearbox.net

Merge tag 'linux-watchdog-5.5-fixes' of git://linux-watchdog.org/linux-watchdog

Pull watchdog fixes from Wim Van Sebroeck:
- fix module aliases
- fix potential build errors
- fix missing conversion of imx7ulp_wdt_enable()
- fix platform_get_irq() complaints
- fix NCT6116D support

* tag 'linux-watchdog-5.5-fixes' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: orion: fix platform_get_irq() complaints
  watchdog: rn5t618_wdt: fix module aliases
  watchdog: tqmx86_wdt: Fix build error
  watchdog: max77620_wdt: fix potential build errors
  watchdog: imx7ulp: Fix missing conversion of imx7ulp_wdt_enable()
  watchdog: w83627hf_wdt: Fix support NCT6116D

Merge branch 'atlantic-bugfixes'

Igor Russkikh says:

====================
Aquantia/Marvell atlantic bugfixes 2020/01

Here is a set of recently discovered bugfixes,
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: atlantic: remove duplicate entries

Function entries were duplicated accidentally, removing the dups.

Fixes: ea4b4d7fc106 ("net: atlantic: loopback tests via private flags")
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: atlantic: loopback configuration in improper place

Initial loopback configuration should be called earlier, before
starting traffic on HW blocks. Otherwise depending on race conditions
it could be kept disabled.

Fixes: ea4b4d7fc106 ("net: atlantic: loopback tests via private flags")
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: atlantic: broken link status on old fw

Last code/checkpatch cleanup did a copy paste error where code from
firmware 3 API logic was moved to firmware 1 logic.

This resulted in FW1.x users would never see the link state as active.

Fixes: 7b0c342f1f67 ("net: atlantic: code style cleanup")
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bpf: cgroup: prevent out-of-order release of cgroup bpf

Before commit 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself")
cgroup bpf structures were released with
corresponding cgroup structures. It guaranteed the hierarchical order
of destruction: children were always first. It preserved attached
programs from being released before their propagated copies.

But with cgroup auto-detachment there are no such guarantees anymore:
cgroup bpf is released as soon as the cgroup is offline and there are
no live associated sockets. It means that an attached program can be
detached and released, while its propagated copy is still living
in the cgroup subtree. This will obviously lead to an use-after-free
bug.

To reproduce the issue the following script can be used:

  #!/bin/bash

  CGROOT=/sys/fs/cgroup

  mkdir -p ${CGROOT}/A ${CGROOT}/B ${CGROOT}/A/C
  sleep 1

  ./test_cgrp2_attach ${CGROOT}/A egress &
  A_PID=$!
  ./test_cgrp2_attach ${CGROOT}/B egress &
  B_PID=$!

  echo $$ > ${CGROOT}/A/C/cgroup.procs
  iperf -s &
  S_PID=$!
  iperf -c localhost -t 100 &
  C_PID=$!

  sleep 1

  echo $$ > ${CGROOT}/B/cgroup.procs
  echo ${S_PID} > ${CGROOT}/B/cgroup.procs
  echo ${C_PID} > ${CGROOT}/B/cgroup.procs

  sleep 1

  rmdir ${CGROOT}/A/C
  rmdir ${CGROOT}/A

  sleep 1

  kill -9 ${S_PID} ${C_PID} ${A_PID} ${B_PID}

On the unpatched kernel the following stacktrace can be obtained:

[   33.619799] BUG: unable to handle page fault for address: ffffbdb4801ab002
[   33.620677] #PF: supervisor read access in kernel mode
[   33.621293] #PF: error_code(0x0000) - not-present page
[   33.622754] Oops: 0000 [#1] SMP NOPTI
[   33.623202] CPU: 0 PID: 601 Comm: iperf Not tainted 5.5.0-rc2+ #23
[   33.625545] RIP: 0010:__cgroup_bpf_run_filter_skb+0x29f/0x3d0
[   33.635809] Call Trace:
[   33.636118]  ? __cgroup_bpf_run_filter_skb+0x2bf/0x3d0
[   33.636728]  ? __switch_to_asm+0x40/0x70
[   33.637196]  ip_finish_output+0x68/0xa0
[   33.637654]  ip_output+0x76/0xf0
[   33.638046]  ? __ip_finish_output+0x1c0/0x1c0
[   33.638576]  __ip_queue_xmit+0x157/0x410
[   33.639049]  __tcp_transmit_skb+0x535/0xaf0
[   33.639557]  tcp_write_xmit+0x378/0x1190
[   33.640049]  ? _copy_from_iter_full+0x8d/0x260
[   33.640592]  tcp_sendmsg_locked+0x2a2/0xdc0
[   33.641098]  ? sock_has_perm+0x10/0xa0
[   33.641574]  tcp_sendmsg+0x28/0x40
[   33.641985]  sock_sendmsg+0x57/0x60
[   33.642411]  sock_write_iter+0x97/0x100
[   33.642876]  new_sync_write+0x1b6/0x1d0
[   33.643339]  vfs_write+0xb6/0x1a0
[   33.643752]  ksys_write+0xa7/0xe0
[   33.644156]  do_syscall_64+0x5b/0x1b0
[   33.644605]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix this by grabbing a reference to the bpf structure of each ancestor
on the initialization of the cgroup bpf structure, and dropping the
reference at the end of releasing the cgroup bpf structure.

This will restore the hierarchical order of cgroup bpf releasing,
without adding any operations on hot paths.

Thanks to Josef Bacik for the debugging and the initial analysis of
the problem.

Fixes: 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself")
Reported-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

firmware: tee_bnxt: Fix multiple call to tee_client_close_context

Fix calling multiple tee_client_close_context in case of shm allocation
fails.

Fixes: 246880958ac9 (“firmware: broadcom: add OP-TEE based BNXT f/w manager”)
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: mv88e6xxx: Preserve priority when setting CPU port.

The 6390 family uses an extended register to set the port connected to
the CPU. The lower 5 bits indicate the port, the upper three bits are
the priority of the frames as they pass through the switch, what
egress queue they should use, etc. Since frames being set to the CPU
are typically management frames, BPDU, IGMP, ARP, etc set the priority
to 7, the reset default, and the highest.

Fixes: 33641994a676 ("net: dsa: mv88e6xxx: Monitor and Management tables")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: sxgbe: Rename Samsung to lowercase

Fix up inconsistent usage of upper and lowercase letters in "Samsung"
name.

"SAMSUNG" is not an abbreviation but a regular trademarked name.
Therefore it should be written with lowercase letters starting with
capital letter.

Although advertisement materials usually use uppercase "SAMSUNG", the
lowercase version is used in all legal aspects (e.g. on Wikipedia and in
privacy/legal statements on
https://www.samsung.com/semiconductor/privacy-global/).

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: wan: sdla: Fix cast from pointer to integer of different size

Since net_device.mem_start is unsigned long, it should not be cast to
int right before casting to pointer.  This fixes warning (compile
testing on alpha architecture):

    drivers/net/wan/sdla.c: In function ‘sdla_transmit’:
    drivers/net/wan/sdla.c:711:13: warning:
        cast to pointer from integer of different size [-Wint-to-pointer-cast]

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: free cmd->obj.chunk for the unprocessed SCTP_CMD_REPLY

This patch is to fix a memleak caused by no place to free cmd->obj.chunk
for the unprocessed SCTP_CMD_REPLY. This issue occurs when failing to
process a cmd while there're still SCTP_CMD_REPLY cmds on the cmd seq
with an allocated chunk in cmd->obj.chunk.

So fix it by freeing cmd->obj.chunk for each SCTP_CMD_REPLY cmd left on
the cmd seq when any cmd returns error. While at it, also remove 'nomem'
label.

Reported-by: syzbot+107c4aff5f392bf1517f@syzkaller.appspotmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: eliminate KMSAN: uninit-value in __tipc_nl_compat_dumpit error

syzbot found the following crash on:
=====================================================
BUG: KMSAN: uninit-value in __nlmsg_parse include/net/netlink.h:661 [inline]
BUG: KMSAN: uninit-value in nlmsg_parse_deprecated
include/net/netlink.h:706 [inline]
BUG: KMSAN: uninit-value in __tipc_nl_compat_dumpit+0x553/0x11e0
net/tipc/netlink_compat.c:215
CPU: 0 PID: 12425 Comm: syz-executor062 Not tainted 5.5.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0x1c9/0x220 lib/dump_stack.c:118
  kmsan_report+0x128/0x220 mm/kmsan/kmsan_report.c:108
  __msan_warning+0x57/0xa0 mm/kmsan/kmsan_instr.c:245
  __nlmsg_parse include/net/netlink.h:661 [inline]
  nlmsg_parse_deprecated include/net/netlink.h:706 [inline]
  __tipc_nl_compat_dumpit+0x553/0x11e0 net/tipc/netlink_compat.c:215
  tipc_nl_compat_dumpit+0x761/0x910 net/tipc/netlink_compat.c:308
  tipc_nl_compat_handle net/tipc/netlink_compat.c:1252 [inline]
  tipc_nl_compat_recv+0x12e9/0x2870 net/tipc/netlink_compat.c:1311
  genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline]
  genl_family_rcv_msg net/netlink/genetlink.c:717 [inline]
  genl_rcv_msg+0x1dd0/0x23a0 net/netlink/genetlink.c:734
  netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2477
  genl_rcv+0x63/0x80 net/netlink/genetlink.c:745
  netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
  netlink_unicast+0xfa0/0x1100 net/netlink/af_netlink.c:1328
  netlink_sendmsg+0x11f0/0x1480 net/netlink/af_netlink.c:1917
  sock_sendmsg_nosec net/socket.c:639 [inline]
  sock_sendmsg net/socket.c:659 [inline]
  ____sys_sendmsg+0x1362/0x13f0 net/socket.c:2330
  ___sys_sendmsg net/socket.c:2384 [inline]
  __sys_sendmsg+0x4f0/0x5e0 net/socket.c:2417
  __do_sys_sendmsg net/socket.c:2426 [inline]
  __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424
  __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424
  do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:295
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x444179
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 1b d8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffd2d6409c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004002e0 RCX: 0000000000444179
RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000003
RBP: 00000000006ce018 R08: 0000000000000000 R09: 00000000004002e0
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401e20
R13: 0000000000401eb0 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:
  kmsan_save_stack_with_flags mm/kmsan/kmsan.c:149 [inline]
  kmsan_internal_poison_shadow+0x5c/0x110 mm/kmsan/kmsan.c:132
  kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:86
  slab_alloc_node mm/slub.c:2774 [inline]
  __kmalloc_node_track_caller+0xe47/0x11f0 mm/slub.c:4382
  __kmalloc_reserve net/core/skbuff.c:141 [inline]
  __alloc_skb+0x309/0xa50 net/core/skbuff.c:209
  alloc_skb include/linux/skbuff.h:1049 [inline]
  nlmsg_new include/net/netlink.h:888 [inline]
  tipc_nl_compat_dumpit+0x6e4/0x910 net/tipc/netlink_compat.c:301
  tipc_nl_compat_handle net/tipc/netlink_compat.c:1252 [inline]
  tipc_nl_compat_recv+0x12e9/0x2870 net/tipc/netlink_compat.c:1311
  genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline]
  genl_family_rcv_msg net/netlink/genetlink.c:717 [inline]
  genl_rcv_msg+0x1dd0/0x23a0 net/netlink/genetlink.c:734
  netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2477
  genl_rcv+0x63/0x80 net/netlink/genetlink.c:745
  netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
  netlink_unicast+0xfa0/0x1100 net/netlink/af_netlink.c:1328
  netlink_sendmsg+0x11f0/0x1480 net/netlink/af_netlink.c:1917
  sock_sendmsg_nosec net/socket.c:639 [inline]
  sock_sendmsg net/socket.c:659 [inline]
  ____sys_sendmsg+0x1362/0x13f0 net/socket.c:2330
  ___sys_sendmsg net/socket.c:2384 [inline]
  __sys_sendmsg+0x4f0/0x5e0 net/socket.c:2417
  __do_sys_sendmsg net/socket.c:2426 [inline]
  __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424
  __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424
  do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:295
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
=====================================================

The complaint above occurred because the memory region pointed by attrbuf
variable was not initialized. To eliminate this warning, we use kcalloc()
rather than kmalloc_array() to allocate memory for attrbuf.

Reported-by: syzbot+b1fd2bf2c89d8407e15f@syzkaller.appspotmail.com
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'spi-fix-v5.5-rc5' of git://git./linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
"A small collection of fixes here, one to make the newly added PTP
  timestamping code more accurate, a few driver fixes and a fix for the
  core DT binding to document the fact that we support eight wire buses"

* tag 'spi-fix-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: Document Octal mode as valid SPI bus width
  spi: spi-dw: Add lock protect dw_spi rx/tx to prevent concurrent calls
  spi: spi-fsl-dspi: Fix 16-bit word order in 32-bit XSPI mode
  spi: Don't look at TX buffer for PTP system timestamping
  spi: uniphier: Fix FIFO threshold

Merge tag 'regulator-fix-v5.5-rc5' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
"Three small fixes here, two the result of Axel Lin's amazing work
  tracking down inconsistencies in drivers"

* tag 'regulator-fix-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: bd70528: Remove .set_ramp_delay for bd70528_ldo_ops
  regulator: axp20x: Fix axp20x_set_ramp_delay
  regulator: axp20x: Fix AXP22x ELDO2 regulator enable bitmask

Merge tag 'rtc-5.5-2' of git://git./linux/kernel/git/abelloni/linux

Pull RTC fixes from Alexandre Belloni:
"A few fixes for this cycle. The CMOS AltCentury support broke a few
  platforms with a recent BIOS so I reverted it. The mt6397 fix is not
  that critical but good to have. And finally, the sun6i fix repairs
  WiFi and BT on a few platforms.

  Summary:

   - cmos: revert AltCentury support on AMD/Hygon

   - mt6397: fix alarm register overwrite

   - sun6i: ensure clock is working on R40"

* tag 'rtc-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: cmos: Revert "rtc: Fix the AltCentury value on AMD/Hygon platform"
  rtc: mt6397: fix alarm register overwrite
  rtc: sun6i: Add support for RTC clocks on R40

Merge tag 'arc-5.5-rc6' of git://git./linux/kernel/git/vgupta/arc

Pull ARC fixes from Vineet Gupta:
"Kconfig warning, stale define, duplicate asm-offset entry ..."

* tag 'arc-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: pt_regs: remove hardcoded registers offset
  ARC: asm-offsets: remove duplicate entry
  ARC: mm: drop stale define of __ARCH_USE_5LEVEL_HACK
  arc: eznps: fix allmodconfig kconfig warning

arm64: Revert support for execute-only user mappings

The ARMv8 64-bit architecture supports execute-only user permissions by
clearing the PTE_USER and PTE_UXN bits, practically making it a mostly
privileged mapping but from which user running at EL0 can still execute.

The downside, however, is that the kernel at EL1 inadvertently reading
such mapping would not trip over the PAN (privileged access never)
protection.

Revert the relevant bits from commit cab15ce604e5 ("arm64: Introduce
execute-only page access permissions") so that PROT_EXEC implies
PROT_READ (and therefore PTE_USER) until the architecture gains proper
support for execute-only user mappings.

Fixes: cab15ce604e5 ("arm64: Introduce execute-only page access permissions")
Cc: <stable@vger.kernel.org> # 4.9.x-
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tpm: Revert "tpm_tis_core: Turn on the TPM before probing IRQ's"

There has been a bunch of reports (one from kernel bugzilla linked)
reporting that when this commit is applied it causes on some machines
boot freezes.

Unfortunately hardware where this commit causes a failure is not widely
available (only one I'm aware is Lenovo T490), which means we cannot
predict yet how long it will take to properly fix tpm_tis interrupt
probing.

Thus, the least worst short term action is to revert the code to the
state before this commit. In long term we need fix the tpm_tis probing
code to work on machines that Stefan's fix was supposed to fix.

Fixes: 21df4a8b6018 ("tpm_tis: reserve chip for duration of tpm_tis_core_init")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205935
Cc: stable@vger.kernel.org
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Xiaoping Zhou <xiaoping.zhou@intel.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

tpm: Revert "tpm_tis_core: Set TPM_CHIP_FLAG_IRQ before probing for interrupts"

There has been a bunch of reports (one from kernel bugzilla linked)
reporting that when this commit is applied it causes on some machines
boot freezes.

Unfortunately hardware where this commit causes a failure is not widely
available (only one I'm aware is Lenovo T490), which means we cannot
predict yet how long it will take to properly fix tpm_tis interrupt
probing.

Thus, the least worst short term action is to revert the code to the
state before this commit. In long term we need fix the tpm_tis probing
code to work on machines that Stefan's fix was supposed to fix.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=205935
Fixes: 1ea32c83c699 ("tpm_tis_core: Set TPM_CHIP_FLAG_IRQ before probing for interrupts")
Cc: stable@vger.kernel.org
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Xiaoping Zhou <xiaoping.zhou@intel.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

tpm: Revert "tpm_tis: reserve chip for duration of tpm_tis_core_init"

Revert a commit, which was included in Linux v5.5-rc3 because it did not
properly fix the issues it was supposed to fix.

Fixes: 21df4a8b6018 ("tpm_tis: reserve chip for duration of tpm_tis_core_init")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205935
Cc: stable@vger.kernel.org
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Xiaoping Zhou <xiaoping.zhou@intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

netfilter: flowtable: add nf_flowtable_time_stamp

This patch adds nf_flowtable_time_stamp and updates the existing code to
use it.

This patch is also implicitly fixing up hardware statistic fetching via
nf_flow_offload_stats() where casting to u32 is missing. Use
nf_flow_timeout_delta() to fix this.

Fixes: c29f74e0df7a ("netfilter: nf_flow_table: hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: wenxu <wenxu@ucloud.cn>

macb: Don't unregister clks unconditionally

The only clk init function in this driver that register a clk is
fu540_c000_clk_init(), and thus we need to unregister the clk when this
driver is removed on that platform. Other init functions, for example
macb_clk_init(), don't register clks and therefore we shouldn't
unregister the clks when this driver is removed. Convert this
registration path to devm so it gets auto-unregistered when this driver
is removed and drop the clk_unregister() calls in driver remove (and
error paths) so that we don't erroneously remove a clk from the system
that isn't registered by this driver.

Otherwise we get strange crashes with a use-after-free when the
devm_clk_get() call in macb_clk_init() calls clk_put() on a clk pointer
that has become invalid because it is freed in clk_unregister().

Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Yash Shah <yash.shah@sifive.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: c218ad559020 ("macb: Add support for SiFive FU540-C000")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: Drop obsolete entries from Samsung sxgbe ethernet driver

The emails to ks.giri@samsung.com and vipul.pandya@samsung.com bounce
with 550 error code:

    host mailin.samsung.com[203.254.224.12] said: 550
    5.1.1 Recipient address rejected: User unknown (in reply to RCPT TO
    command)"

Drop Girish K S and Vipul Pandya from sxgbe maintainers entry.

Cc: Byungho An <bh74.an@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: qrtr: fix len of skb_put_padto in qrtr_node_enqueue

The len used for skb_put_padto is wrong, it need to add len of hdr.

In qrtr_node_enqueue, local variable size_t len is assign with
skb->len, then skb_push(skb, sizeof(*hdr)) will add skb->len with
sizeof(*hdr), so local variable size_t len is not same with skb->len
after skb_push(skb, sizeof(*hdr)).

Then the purpose of skb_put_padto(skb, ALIGN(len, 4)) is to add add
pad to the end of the skb's data if skb->len is not aligned to 4, but
unfortunately it use len instead of skb->len, at this line, skb->len
is 32 bytes(sizeof(*hdr)) more than len, for example, len is 3 bytes,
then skb->len is 35 bytes(3 + 32), and ALIGN(len, 4) is 4 bytes, so
__skb_put_padto will do nothing after check size(35) < len(4), the
correct value should be 36(sizeof(*hdr) + ALIGN(len, 4) = 32 + 4),
then __skb_put_padto will pass check size(35) < len(36) and add 1 byte
to the end of skb's data, then logic is correct.

function of skb_push:
void *skb_push(struct sk_buff *skb, unsigned int len)
{
skb->data -= len;
skb->len += len;
if (unlikely(skb->data < skb->head))
skb_under_panic(skb, len, __builtin_return_address(0));
return skb->data;
}

function of skb_put_padto
static inline int skb_put_padto(struct sk_buff *skb, unsigned int len)
{
return __skb_put_padto(skb, len, true);
}

function of __skb_put_padto
static inline int __skb_put_padto(struct sk_buff *skb, unsigned int len,
bool free_on_error)
{
unsigned int size = skb->len;

if (unlikely(size < len)) {
len -= size;
if (__skb_pad(skb, len, free_on_error))
return -ENOMEM;
__skb_put(skb, len);
}
return 0;
}

Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Linux 5.5-rc5

drivers/net/b44: Change to non-atomic bit operations on pwol_mask

Atomic operations that span cache lines are super-expensive on x86
(not just to the current processor, but also to other processes as all
memory operations are blocked until the operation completes). Upcoming
x86 processors have a switch to cause such operations to generate a #AC
trap. It is expected that some real time systems will enable this mode
in BIOS.

In preparation for this, it is necessary to fix code that may execute
atomic instructions with operands that cross cachelines because the #AC
trap will crash the kernel.

Since "pwol_mask" is local and never exposed to concurrency, there is
no need to set bits in pwol_mask using atomic operations.

Directly operate on the byte which contains the bit instead of using
__set_bit() to avoid any big endian concern due to type cast to
unsigned long in __set_bit().

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'riscv/for-v5.5-rc5' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Paul Walmsley:
"Several fixes for RISC-V:

   - Fix function graph trace support

   - Prefix the CSR IRQ_* macro names with "RV_", to avoid collisions
     with macros elsewhere in the Linux kernel tree named "IRQ_TIMER"

   - Use __pa_symbol() when computing the physical address of a kernel
     symbol, rather than __pa()

   - Mark the RISC-V port as supporting GCOV

  One DT addition:

   - Describe the L2 cache controller in the FU540 DT file

  One documentation update:

   - Add patch acceptance guideline documentation"

* tag 'riscv/for-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  Documentation: riscv: add patch acceptance guidelines
  riscv: prefix IRQ_ macro names with an RV_ namespace
  clocksource: riscv: add notrace to riscv_sched_clock
  riscv: ftrace: correct the condition logic in function graph tracer
  riscv: dts: Add DT support for SiFive L2 cache controller
  riscv: gcov: enable gcov for RISC-V
  riscv: mm: use __pa_symbol for kernel symbols

netfilter: nf_tables: unbind callbacks from flowtable destroy path

Callback unbinding needs to be done after nf_flow_table_free(),
otherwise entries are not removed from the hardware.

Update nft_unregister_flowtable_net_hooks() to call
nf_unregister_net_hook() instead since the commit/abort paths do not
deal with the callback unbinding anymore.

Add a comment to nft_flowtable_event() to clarify that
flow_offload_netdev_event() already removes the entries before the
callback unbinding.

Fixes: 8bb69f3b2918 ("netfilter: nf_tables: add flowtable offload control plane")
Fixes ff4bf2f42a40 ("netfilter: nf_tables: add nft_unregister_flowtable_hook()")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: wenxu <wenxu@ucloud.cn>

netfilter: nf_flow_table_offload: fix the nat port mangle.

Shift on 32-bit word to define the port number depends on the flow
direction.

Fixes: c29f74e0df7a ("netfilter: nf_flow_table: hardware offload support")
Fixes: 7acd9378dc652 ("netfilter: nf_flow_table_offload: Correct memcpy size for flow_overload_mangle()")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_flow_table_offload: check the status of dst_neigh

It is better to get the dst_neigh with neigh->lock and check the
nud_state is VALID. If there is not neigh previous, the lookup will
Create a non NUD_VALID with 00:00:00:00:00:00 mac.

Fixes: c29f74e0df7a ("netfilter: nf_flow_table: hardware offload support")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>